summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--package/iwinfo/Makefile2
-rw-r--r--package/iwinfo/src/include/iwinfo.h12
-rw-r--r--package/iwinfo/src/include/iwinfo/api/broadcom.h24
-rw-r--r--package/iwinfo/src/include/iwinfo/api/madwifi.h6
-rw-r--r--package/iwinfo/src/include/iwinfo/api/nl80211.h1064
-rw-r--r--package/iwinfo/src/iwinfo_cli.c43
-rw-r--r--package/iwinfo/src/iwinfo_lua.c39
-rw-r--r--package/iwinfo/src/iwinfo_madwifi.c20
-rw-r--r--package/iwinfo/src/iwinfo_nl80211.c72
-rw-r--r--package/iwinfo/src/iwinfo_wl.c111
10 files changed, 1305 insertions, 88 deletions
diff --git a/package/iwinfo/Makefile b/package/iwinfo/Makefile
index d58d62d46..63ccec9b1 100644
--- a/package/iwinfo/Makefile
+++ b/package/iwinfo/Makefile
@@ -7,7 +7,7 @@
include $(TOPDIR)/rules.mk
PKG_NAME:=libiwinfo
-PKG_RELEASE:=28
+PKG_RELEASE:=29
PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)
PKG_CONFIG_DEPENDS := \
diff --git a/package/iwinfo/src/include/iwinfo.h b/package/iwinfo/src/include/iwinfo.h
index 40b85a049..72e233361 100644
--- a/package/iwinfo/src/include/iwinfo.h
+++ b/package/iwinfo/src/include/iwinfo.h
@@ -49,10 +49,22 @@ extern const char *IWINFO_KMGMT_NAMES[];
extern const char *IWINFO_AUTH_NAMES[];
+struct iwinfo_rate_entry {
+ uint16_t rate;
+ uint8_t mcs;
+ uint8_t is_40mhz:1;
+ uint8_t is_short_gi:1;
+};
+
struct iwinfo_assoclist_entry {
uint8_t mac[6];
int8_t signal;
int8_t noise;
+ uint32_t inactive;
+ uint32_t rx_packets;
+ uint32_t tx_packets;
+ struct iwinfo_rate_entry rx_rate;
+ struct iwinfo_rate_entry tx_rate;
};
struct iwinfo_txpwrlist_entry {
diff --git a/package/iwinfo/src/include/iwinfo/api/broadcom.h b/package/iwinfo/src/include/iwinfo/api/broadcom.h
index bae69c7f7..50eedd9e4 100644
--- a/package/iwinfo/src/include/iwinfo/api/broadcom.h
+++ b/package/iwinfo/src/include/iwinfo/api/broadcom.h
@@ -64,6 +64,30 @@ typedef struct wl_sta_rssi {
uint16_t foo;
} wl_sta_rssi_t;
+#define WL_NUMRATES 255 /* max # of rates in a rateset */
+typedef struct wl_rateset {
+ uint32_t count; /* # rates in this set */
+ uint8_t rates[WL_NUMRATES]; /* rates in 500kbps units w/hi bit set if basic */
+} wl_rateset_t;
+
+typedef struct wl_sta_info {
+ uint16_t ver; /* version of this struct */
+ uint16_t len; /* length in bytes of this structure */
+ uint16_t cap; /* sta's advertised capabilities */
+ uint32_t flags; /* flags defined below */
+ uint32_t idle; /* time since data pkt rx'd from sta */
+ unsigned char ea[6]; /* Station address */
+ wl_rateset_t rateset; /* rateset in use */
+ uint32_t in; /* seconds elapsed since associated */
+ uint32_t listen_interval_inms; /* Min Listen interval in ms for this STA */
+ uint32_t tx_pkts; /* # of packets transmitted */
+ uint32_t tx_failures; /* # of packets failed */
+ uint32_t rx_ucast_pkts; /* # of unicast packets received */
+ uint32_t rx_mcast_pkts; /* # of multicast packets received */
+ uint32_t tx_rate; /* Rate of last successful tx frame */
+ uint32_t rx_rate; /* Rate of last successful rx frame */
+} wl_sta_info_t;
+
typedef struct wlc_ssid {
uint32_t ssid_len;
unsigned char ssid[32];
diff --git a/package/iwinfo/src/include/iwinfo/api/madwifi.h b/package/iwinfo/src/include/iwinfo/api/madwifi.h
index fe4b3e62a..80d32e195 100644
--- a/package/iwinfo/src/include/iwinfo/api/madwifi.h
+++ b/package/iwinfo/src/include/iwinfo/api/madwifi.h
@@ -22,8 +22,10 @@
#define _MADWIFI_H
/* ieee80211.h */
-#define IEEE80211_ADDR_LEN 6
-#define IEEE80211_RATE_VAL 0x7f
+#define IEEE80211_ADDR_LEN 6
+#define IEEE80211_RATE_VAL 0x7f
+#define IEEE80211_SEQ_SEQ_MASK 0xfff0
+#define IEEE80211_SEQ_SEQ_SHIFT 4
/* ieee80211_crypto.h */
diff --git a/package/iwinfo/src/include/iwinfo/api/nl80211.h b/package/iwinfo/src/include/iwinfo/api/nl80211.h
index 999e35421..d73dcb8e8 100644
--- a/package/iwinfo/src/include/iwinfo/api/nl80211.h
+++ b/package/iwinfo/src/include/iwinfo/api/nl80211.h
@@ -6,7 +6,7 @@
* Copyright 2006-2010 Johannes Berg <johannes@sipsolutions.net>
* Copyright 2008 Michael Wu <flamingice@sourmilk.net>
* Copyright 2008 Luis Carlos Cobo <luisca@cozybit.com>
- * Copyright 2008 Michael Buesch <mb@bu3sch.de>
+ * Copyright 2008 Michael Buesch <m@bues.ch>
* Copyright 2008, 2009 Luis R. Rodriguez <lrodriguez@atheros.com>
* Copyright 2008 Jouni Malinen <jouni.malinen@atheros.com>
* Copyright 2008 Colin McCabe <colin@cozybit.com>
@@ -77,6 +77,39 @@
*/
/**
+ * DOC: Virtual interface / concurrency capabilities
+ *
+ * Some devices are able to operate with virtual MACs, they can have
+ * more than one virtual interface. The capability handling for this
+ * is a bit complex though, as there may be a number of restrictions
+ * on the types of concurrency that are supported.
+ *
+ * To start with, each device supports the interface types listed in
+ * the %NL80211_ATTR_SUPPORTED_IFTYPES attribute, but by listing the
+ * types there no concurrency is implied.
+ *
+ * Once concurrency is desired, more attributes must be observed:
+ * To start with, since some interface types are purely managed in
+ * software, like the AP-VLAN type in mac80211 for example, there's
+ * an additional list of these, they can be added at any time and
+ * are only restricted by some semantic restrictions (e.g. AP-VLAN
+ * cannot be added without a corresponding AP interface). This list
+ * is exported in the %NL80211_ATTR_SOFTWARE_IFTYPES attribute.
+ *
+ * Further, the list of supported combinations is exported. This is
+ * in the %NL80211_ATTR_INTERFACE_COMBINATIONS attribute. Basically,
+ * it exports a list of "groups", and at any point in time the
+ * interfaces that are currently active must fall into any one of
+ * the advertised groups. Within each group, there are restrictions
+ * on the number of interfaces of different types that are supported
+ * and also the number of different channels, along with potentially
+ * some other restrictions. See &enum nl80211_if_combination_attrs.
+ *
+ * All together, these attributes define the concurrency of virtual
+ * interfaces that a given device supports.
+ */
+
+/**
* enum nl80211_commands - supported nl80211 commands
*
* @NL80211_CMD_UNSPEC: unspecified command to catch errors
@@ -128,6 +161,13 @@
* @NL80211_CMD_SET_BEACON: set the beacon on an access point interface
* using the %NL80211_ATTR_BEACON_INTERVAL, %NL80211_ATTR_DTIM_PERIOD,
* %NL80211_ATTR_BEACON_HEAD and %NL80211_ATTR_BEACON_TAIL attributes.
+ * Following attributes are provided for drivers that generate full Beacon
+ * and Probe Response frames internally: %NL80211_ATTR_SSID,
+ * %NL80211_ATTR_HIDDEN_SSID, %NL80211_ATTR_CIPHERS_PAIRWISE,
+ * %NL80211_ATTR_CIPHER_GROUP, %NL80211_ATTR_WPA_VERSIONS,
+ * %NL80211_ATTR_AKM_SUITES, %NL80211_ATTR_PRIVACY,
+ * %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_IE, %NL80211_ATTR_IE_PROBE_RESP,
+ * %NL80211_ATTR_IE_ASSOC_RESP.
* @NL80211_CMD_NEW_BEACON: add a new beacon to an access point interface,
* parameters are like for %NL80211_CMD_SET_BEACON.
* @NL80211_CMD_DEL_BEACON: remove the beacon, stop sending it
@@ -148,6 +188,10 @@
* @NL80211_CMD_SET_MPATH: Set mesh path attributes for mesh path to
* destination %NL80211_ATTR_MAC on the interface identified by
* %NL80211_ATTR_IFINDEX.
+ * @NL80211_CMD_NEW_MPATH: Create a new mesh path for the destination given by
+ * %NL80211_ATTR_MAC via %NL80211_ATTR_MPATH_NEXT_HOP.
+ * @NL80211_CMD_DEL_MPATH: Delete a mesh path to the destination given by
+ * %NL80211_ATTR_MAC.
* @NL80211_CMD_NEW_PATH: Add a mesh path with given attributes to the
* the interface identified by %NL80211_ATTR_IFINDEX.
* @NL80211_CMD_DEL_PATH: Remove a mesh path identified by %NL80211_ATTR_MAC
@@ -172,10 +216,10 @@
* to the specified ISO/IEC 3166-1 alpha2 country code. The core will
* store this as a valid request and then query userspace for it.
*
- * @NL80211_CMD_GET_MESH_PARAMS: Get mesh networking properties for the
+ * @NL80211_CMD_GET_MESH_CONFIG: Get mesh networking properties for the
* interface identified by %NL80211_ATTR_IFINDEX
*
- * @NL80211_CMD_SET_MESH_PARAMS: Set mesh networking properties for the
+ * @NL80211_CMD_SET_MESH_CONFIG: Set mesh networking properties for the
* interface identified by %NL80211_ATTR_IFINDEX
*
* @NL80211_CMD_SET_MGMT_EXTRA_IE: Set extra IEs for management frames. The
@@ -194,11 +238,36 @@
*
* @NL80211_CMD_GET_SCAN: get scan results
* @NL80211_CMD_TRIGGER_SCAN: trigger a new scan with the given parameters
+ * %NL80211_ATTR_TX_NO_CCK_RATE is used to decide whether to send the
+ * probe requests at CCK rate or not.
* @NL80211_CMD_NEW_SCAN_RESULTS: scan notification (as a reply to
* NL80211_CMD_GET_SCAN and on the "scan" multicast group)
* @NL80211_CMD_SCAN_ABORTED: scan was aborted, for unspecified reasons,
* partial scan results may be available
*
+ * @NL80211_CMD_START_SCHED_SCAN: start a scheduled scan at certain
+ * intervals, as specified by %NL80211_ATTR_SCHED_SCAN_INTERVAL.
+ * Like with normal scans, if SSIDs (%NL80211_ATTR_SCAN_SSIDS)
+ * are passed, they are used in the probe requests. For
+ * broadcast, a broadcast SSID must be passed (ie. an empty
+ * string). If no SSID is passed, no probe requests are sent and
+ * a passive scan is performed. %NL80211_ATTR_SCAN_FREQUENCIES,
+ * if passed, define which channels should be scanned; if not
+ * passed, all channels allowed for the current regulatory domain
+ * are used. Extra IEs can also be passed from the userspace by
+ * using the %NL80211_ATTR_IE attribute.
+ * @NL80211_CMD_STOP_SCHED_SCAN: stop a scheduled scan. Returns -ENOENT
+ * if scheduled scan is not running.
+ * @NL80211_CMD_SCHED_SCAN_RESULTS: indicates that there are scheduled scan
+ * results available.
+ * @NL80211_CMD_SCHED_SCAN_STOPPED: indicates that the scheduled scan has
+ * stopped. The driver may issue this event at any time during a
+ * scheduled scan. One reason for stopping the scan is if the hardware
+ * does not support starting an association or a normal scan while running
+ * a scheduled scan. This event is also sent when the
+ * %NL80211_CMD_STOP_SCHED_SCAN command is received or when the interface
+ * is brought down while a scheduled scan was running.
+ *
* @NL80211_CMD_GET_SURVEY: get survey resuls, e.g. channel occupation
* or noise level
* @NL80211_CMD_NEW_SURVEY_RESULTS: survey data notification (as a reply to
@@ -358,11 +427,18 @@
* user space application). %NL80211_ATTR_FRAME is used to specify the
* frame contents (including header). %NL80211_ATTR_WIPHY_FREQ (and
* optionally %NL80211_ATTR_WIPHY_CHANNEL_TYPE) is used to indicate on
- * which channel the frame is to be transmitted or was received. This
- * channel has to be the current channel (remain-on-channel or the
- * operational channel). When called, this operation returns a cookie
- * (%NL80211_ATTR_COOKIE) that will be included with the TX status event
- * pertaining to the TX request.
+ * which channel the frame is to be transmitted or was received. If this
+ * channel is not the current channel (remain-on-channel or the
+ * operational channel) the device will switch to the given channel and
+ * transmit the frame, optionally waiting for a response for the time
+ * specified using %NL80211_ATTR_DURATION. When called, this operation
+ * returns a cookie (%NL80211_ATTR_COOKIE) that will be included with the
+ * TX status event pertaining to the TX request.
+ * %NL80211_ATTR_TX_NO_CCK_RATE is used to decide whether to send the
+ * management frames at CCK rate or not in 2GHz band.
+ * @NL80211_CMD_FRAME_WAIT_CANCEL: When an off-channel TX was requested, this
+ * command may be used with the corresponding cookie to cancel the wait
+ * time if it is known that it is no longer necessary.
* @NL80211_CMD_ACTION: Alias for @NL80211_CMD_FRAME for backward compatibility.
* @NL80211_CMD_FRAME_TX_STATUS: Report TX status of a management frame
* transmitted with %NL80211_CMD_FRAME. %NL80211_ATTR_COOKIE identifies
@@ -389,11 +465,87 @@
*
* @NL80211_CMD_SET_WDS_PEER: Set the MAC address of the peer on a WDS interface.
*
+ * @NL80211_CMD_JOIN_MESH: Join a mesh. The mesh ID must be given, and initial
+ * mesh config parameters may be given.
+ * @NL80211_CMD_LEAVE_MESH: Leave the mesh network -- no special arguments, the
+ * network is determined by the network interface.
+ *
+ * @NL80211_CMD_UNPROT_DEAUTHENTICATE: Unprotected deauthentication frame
+ * notification. This event is used to indicate that an unprotected
+ * deauthentication frame was dropped when MFP is in use.
+ * @NL80211_CMD_UNPROT_DISASSOCIATE: Unprotected disassociation frame
+ * notification. This event is used to indicate that an unprotected
+ * disassociation frame was dropped when MFP is in use.
+ *
+ * @NL80211_CMD_NEW_PEER_CANDIDATE: Notification on the reception of a
+ * beacon or probe response from a compatible mesh peer. This is only
+ * sent while no station information (sta_info) exists for the new peer
+ * candidate and when @NL80211_MESH_SETUP_USERSPACE_AUTH is set. On
+ * reception of this notification, userspace may decide to create a new
+ * station (@NL80211_CMD_NEW_STATION). To stop this notification from
+ * reoccurring, the userspace authentication daemon may want to create the
+ * new station with the AUTHENTICATED flag unset and maybe change it later
+ * depending on the authentication result.
+ *
+ * @NL80211_CMD_GET_WOWLAN: get Wake-on-Wireless-LAN (WoWLAN) settings.
+ * @NL80211_CMD_SET_WOWLAN: set Wake-on-Wireless-LAN (WoWLAN) settings.
+ * Since wireless is more complex than wired ethernet, it supports
+ * various triggers. These triggers can be configured through this
+ * command with the %NL80211_ATTR_WOWLAN_TRIGGERS attribute. For
+ * more background information, see
+ * http://wireless.kernel.org/en/users/Documentation/WoWLAN.
+ *
+ * @NL80211_CMD_SET_REKEY_OFFLOAD: This command is used give the driver
+ * the necessary information for supporting GTK rekey offload. This
+ * feature is typically used during WoWLAN. The configuration data
+ * is contained in %NL80211_ATTR_REKEY_DATA (which is nested and
+ * contains the data in sub-attributes). After rekeying happened,
+ * this command may also be sent by the driver as an MLME event to
+ * inform userspace of the new replay counter.
+ *
+ * @NL80211_CMD_PMKSA_CANDIDATE: This is used as an event to inform userspace
+ * of PMKSA caching dandidates.
+ *
+ * @NL80211_CMD_TDLS_OPER: Perform a high-level TDLS command (e.g. link setup).
+ * @NL80211_CMD_TDLS_MGMT: Send a TDLS management frame.
+ *
+ * @NL80211_CMD_UNEXPECTED_FRAME: Used by an application controlling an AP
+ * (or GO) interface (i.e. hostapd) to ask for unexpected frames to
+ * implement sending deauth to stations that send unexpected class 3
+ * frames. Also used as the event sent by the kernel when such a frame
+ * is received.
+ * For the event, the %NL80211_ATTR_MAC attribute carries the TA and
+ * other attributes like the interface index are present.
+ * If used as the command it must have an interface index and you can
+ * only unsubscribe from the event by closing the socket. Subscription
+ * is also for %NL80211_CMD_UNEXPECTED_4ADDR_FRAME events.
+ *
+ * @NL80211_CMD_UNEXPECTED_4ADDR_FRAME: Sent as an event indicating that the
+ * associated station identified by %NL80211_ATTR_MAC sent a 4addr frame
+ * and wasn't already in a 4-addr VLAN. The event will be sent similarly
+ * to the %NL80211_CMD_UNEXPECTED_FRAME event, to the same listener.
+ *
+ * @NL80211_CMD_PROBE_CLIENT: Probe an associated station on an AP interface
+ * by sending a null data frame to it and reporting when the frame is
+ * acknowleged. This is used to allow timing out inactive clients. Uses
+ * %NL80211_ATTR_IFINDEX and %NL80211_ATTR_MAC. The command returns a
+ * direct reply with an %NL80211_ATTR_COOKIE that is later used to match
+ * up the event with the request. The event includes the same data and
+ * has %NL80211_ATTR_ACK set if the frame was ACKed.
+ *
+ * @NL80211_CMD_REGISTER_BEACONS: Register this socket to receive beacons from
+ * other BSSes when any interfaces are in AP mode. This helps implement
+ * OLBC handling in hostapd. Beacons are reported in %NL80211_CMD_FRAME
+ * messages. Note that per PHY only one application may register.
+ *
+ * @NL80211_CMD_SET_NOACK_MAP: sets a bitmap for the individual TIDs whether
+ * No Acknowledgement Policy should be applied.
+ *
* @NL80211_CMD_MAX: highest used command number
* @__NL80211_CMD_AFTER_LAST: internal use
*/
enum nl80211_commands {
-/* don't change the order or add anything inbetween, this is ABI! */
+/* don't change the order or add anything between, this is ABI! */
NL80211_CMD_UNSPEC,
NL80211_CMD_GET_WIPHY, /* can dump */
@@ -431,8 +583,8 @@ enum nl80211_commands {
NL80211_CMD_SET_REG,
NL80211_CMD_REQ_SET_REG,
- NL80211_CMD_GET_MESH_PARAMS,
- NL80211_CMD_SET_MESH_PARAMS,
+ NL80211_CMD_GET_MESH_CONFIG,
+ NL80211_CMD_SET_MESH_CONFIG,
NL80211_CMD_SET_MGMT_EXTRA_IE /* reserved; not used */,
@@ -493,6 +645,41 @@ enum nl80211_commands {
NL80211_CMD_SET_CHANNEL,
NL80211_CMD_SET_WDS_PEER,
+ NL80211_CMD_FRAME_WAIT_CANCEL,
+
+ NL80211_CMD_JOIN_MESH,
+ NL80211_CMD_LEAVE_MESH,
+
+ NL80211_CMD_UNPROT_DEAUTHENTICATE,
+ NL80211_CMD_UNPROT_DISASSOCIATE,
+
+ NL80211_CMD_NEW_PEER_CANDIDATE,
+
+ NL80211_CMD_GET_WOWLAN,
+ NL80211_CMD_SET_WOWLAN,
+
+ NL80211_CMD_START_SCHED_SCAN,
+ NL80211_CMD_STOP_SCHED_SCAN,
+ NL80211_CMD_SCHED_SCAN_RESULTS,
+ NL80211_CMD_SCHED_SCAN_STOPPED,
+
+ NL80211_CMD_SET_REKEY_OFFLOAD,
+
+ NL80211_CMD_PMKSA_CANDIDATE,
+
+ NL80211_CMD_TDLS_OPER,
+ NL80211_CMD_TDLS_MGMT,
+
+ NL80211_CMD_UNEXPECTED_FRAME,
+
+ NL80211_CMD_PROBE_CLIENT,
+
+ NL80211_CMD_REGISTER_BEACONS,
+
+ NL80211_CMD_UNEXPECTED_4ADDR_FRAME,
+
+ NL80211_CMD_SET_NOACK_MAP,
+
/* add new commands above here */
/* used to define NL80211_CMD_MAX below */
@@ -513,6 +700,13 @@ enum nl80211_commands {
#define NL80211_CMD_DISASSOCIATE NL80211_CMD_DISASSOCIATE
#define NL80211_CMD_REG_BEACON_HINT NL80211_CMD_REG_BEACON_HINT
+#define NL80211_ATTR_FEATURE_FLAGS NL80211_ATTR_FEATURE_FLAGS
+
+/* source-level API compatibility */
+#define NL80211_CMD_GET_MESH_PARAMS NL80211_CMD_GET_MESH_CONFIG
+#define NL80211_CMD_SET_MESH_PARAMS NL80211_CMD_SET_MESH_CONFIG
+#define NL80211_MESH_SETUP_VENDOR_PATH_SEL_IE NL80211_MESH_SETUP_IE
+
/**
* enum nl80211_attrs - nl80211 netlink attributes
*
@@ -583,7 +777,7 @@ enum nl80211_commands {
* consisting of a nested array.
*
* @NL80211_ATTR_MESH_ID: mesh id (1-32 bytes).
- * @NL80211_ATTR_PLINK_ACTION: action to perform on the mesh peer link.
+ * @NL80211_ATTR_STA_PLINK_ACTION: action to perform on the mesh peer link.
* @NL80211_ATTR_MPATH_NEXT_HOP: MAC address of the next hop for a mesh path.
* @NL80211_ATTR_MPATH_INFO: information about a mesh_path, part of mesh path
* info given for %NL80211_CMD_GET_MPATH, nested attribute described at
@@ -628,8 +822,14 @@ enum nl80211_commands {
*
* @NL80211_ATTR_MAX_NUM_SCAN_SSIDS: number of SSIDs you can scan with
* a single scan request, a wiphy attribute.
+ * @NL80211_ATTR_MAX_NUM_SCHED_SCAN_SSIDS: number of SSIDs you can
+ * scan with a single scheduled scan request, a wiphy attribute.
* @NL80211_ATTR_MAX_SCAN_IE_LEN: maximum length of information elements
* that can be added to a scan request
+ * @NL80211_ATTR_MAX_SCHED_SCAN_IE_LEN: maximum length of information
+ * elements that can be added to a scheduled scan request
+ * @NL80211_ATTR_MAX_MATCH_SETS: maximum number of sets that can be
+ * used with @NL80211_ATTR_SCHED_SCAN_MATCH, a wiphy attribute.
*
* @NL80211_ATTR_SCAN_FREQUENCIES: nested attribute with frequencies (in MHz)
* @NL80211_ATTR_SCAN_SSIDS: nested attribute with SSIDs, leave out for passive
@@ -710,18 +910,20 @@ enum nl80211_commands {
* @NL80211_ATTR_STATUS_CODE: StatusCode for the %NL80211_CMD_CONNECT
* event (u16)
* @NL80211_ATTR_PRIVACY: Flag attribute, used with connect(), indicating
- * that protected APs should be used.
+ * that protected APs should be used. This is also used with NEW_BEACON to
+ * indicate that the BSS is to use protection.
*
- * @NL80211_ATTR_CIPHERS_PAIRWISE: Used with CONNECT and ASSOCIATE to
- * indicate which unicast key ciphers will be used with the connection
+ * @NL80211_ATTR_CIPHERS_PAIRWISE: Used with CONNECT, ASSOCIATE, and NEW_BEACON
+ * to indicate which unicast key ciphers will be used with the connection
* (an array of u32).
- * @NL80211_ATTR_CIPHER_GROUP: Used with CONNECT and ASSOCIATE to indicate
- * which group key cipher will be used with the connection (a u32).
- * @NL80211_ATTR_WPA_VERSIONS: Used with CONNECT and ASSOCIATE to indicate
- * which WPA version(s) the AP we want to associate with is using
+ * @NL80211_ATTR_CIPHER_GROUP: Used with CONNECT, ASSOCIATE, and NEW_BEACON to
+ * indicate which group key cipher will be used with the connection (a
+ * u32).
+ * @NL80211_ATTR_WPA_VERSIONS: Used with CONNECT, ASSOCIATE, and NEW_BEACON to
+ * indicate which WPA version(s) the AP we want to associate with is using
* (a u32 with flags from &enum nl80211_wpa_versions).
- * @NL80211_ATTR_AKM_SUITES: Used with CONNECT and ASSOCIATE to indicate
- * which key management algorithm(s) to use (an array of u32).
+ * @NL80211_ATTR_AKM_SUITES: Used with CONNECT, ASSOCIATE, and NEW_BEACON to
+ * indicate which key management algorithm(s) to use (an array of u32).
*
* @NL80211_ATTR_REQ_IE: (Re)association request information elements as
* sent out by the card, for ROAM and successful CONNECT events.
@@ -758,6 +960,9 @@ enum nl80211_commands {
* cache, a wiphy attribute.
*
* @NL80211_ATTR_DURATION: Duration of an operation in milliseconds, u32.
+ * @NL80211_ATTR_MAX_REMAIN_ON_CHANNEL_DURATION: Device attribute that
+ * specifies the maximum duration that can be requested with the
+ * remain-on-channel operation, in milliseconds, u32.
*
* @NL80211_ATTR_COOKIE: Generic 64-bit cookie to identify objects.
*
@@ -804,13 +1009,195 @@ enum nl80211_commands {
* @NL80211_ATTR_SUPPORT_IBSS_RSN: The device supports IBSS RSN, which mostly
* means support for per-station GTKs.
*
+ * @NL80211_ATTR_WIPHY_ANTENNA_TX: Bitmap of allowed antennas for transmitting.
+ * This can be used to mask out antennas which are not attached or should
+ * not be used for transmitting. If an antenna is not selected in this
+ * bitmap the hardware is not allowed to transmit on this antenna.
+ *
+ * Each bit represents one antenna, starting with antenna 1 at the first
+ * bit. Depending on which antennas are selected in the bitmap, 802.11n
+ * drivers can derive which chainmasks to use (if all antennas belonging to
+ * a particular chain are disabled this chain should be disabled) and if
+ * a chain has diversity antennas wether diversity should be used or not.
+ * HT capabilities (STBC, TX Beamforming, Antenna selection) can be
+ * derived from the available chains after applying the antenna mask.
+ * Non-802.11n drivers can derive wether to use diversity or not.
+ * Drivers may reject configurations or RX/TX mask combinations they cannot
+ * support by returning -EINVAL.
+ *
+ * @NL80211_ATTR_WIPHY_ANTENNA_RX: Bitmap of allowed antennas for receiving.
+ * This can be used to mask out antennas which are not attached or should
+ * not be used for receiving. If an antenna is not selected in this bitmap
+ * the hardware should not be configured to receive on this antenna.
+ * For a more detailed description see @NL80211_ATTR_WIPHY_ANTENNA_TX.
+ *
+ * @NL80211_ATTR_WIPHY_ANTENNA_AVAIL_TX: Bitmap of antennas which are available
+ * for configuration as TX antennas via the above parameters.
+ *
+ * @NL80211_ATTR_WIPHY_ANTENNA_AVAIL_RX: Bitmap of antennas which are available
+ * for configuration as RX antennas via the above parameters.
+ *
* @NL80211_ATTR_MCAST_RATE: Multicast tx rate (in 100 kbps) for IBSS
*
+ * @NL80211_ATTR_OFFCHANNEL_TX_OK: For management frame TX, the frame may be
+ * transmitted on another channel when the channel given doesn't match
+ * the current channel. If the current channel doesn't match and this
+ * flag isn't set, the frame will be rejected. This is also used as an
+ * nl80211 capability flag.
+ *
+ * @NL80211_ATTR_BSS_HTOPMODE: HT operation mode (u16)
+ *
+ * @NL80211_ATTR_KEY_DEFAULT_TYPES: A nested attribute containing flags
+ * attributes, specifying what a key should be set as default as.
+ * See &enum nl80211_key_default_types.
+ *
+ * @NL80211_ATTR_MESH_SETUP: Optional mesh setup parameters. These cannot be
+ * changed once the mesh is active.
+ * @NL80211_ATTR_MESH_CONFIG: Mesh configuration parameters, a nested attribute
+ * containing attributes from &enum nl80211_meshconf_params.
+ * @NL80211_ATTR_SUPPORT_MESH_AUTH: Currently, this means the underlying driver
+ * allows auth frames in a mesh to be passed to userspace for processing via
+ * the @NL80211_MESH_SETUP_USERSPACE_AUTH flag.
+ * @NL80211_ATTR_STA_PLINK_STATE: The state of a mesh peer link as
+ * defined in &enum nl80211_plink_state. Used when userspace is
+ * driving the peer link management state machine.
+ * @NL80211_MESH_SETUP_USERSPACE_AMPE must be enabled.
+ *
+ * @NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED: indicates, as part of the wiphy
+ * capabilities, the supported WoWLAN triggers
+ * @NL80211_ATTR_WOWLAN_TRIGGERS: used by %NL80211_CMD_SET_WOWLAN to
+ * indicate which WoW triggers should be enabled. This is also
+ * used by %NL80211_CMD_GET_WOWLAN to get the currently enabled WoWLAN
+ * triggers.
+
+ * @NL80211_ATTR_SCHED_SCAN_INTERVAL: Interval between scheduled scan
+ * cycles, in msecs.
+
+ * @NL80211_ATTR_SCHED_SCAN_MATCH: Nested attribute with one or more
+ * sets of attributes to match during scheduled scans. Only BSSs
+ * that match any of the sets will be reported. These are
+ * pass-thru filter rules.
+ * For a match to succeed, the BSS must match all attributes of a
+ * set. Since not every hardware supports matching all types of
+ * attributes, there is no guarantee that the reported BSSs are
+ * fully complying with the match sets and userspace needs to be
+ * able to ignore them by itself.
+ * Thus, the implementation is somewhat hardware-dependent, but
+ * this is only an optimization and the userspace application
+ * needs to handle all the non-filtered results anyway.
+ * If the match attributes don't make sense when combined with
+ * the values passed in @NL80211_ATTR_SCAN_SSIDS (eg. if an SSID
+ * is included in the probe request, but the match attributes
+ * will never let it go through), -EINVAL may be returned.
+ * If ommited, no filtering is done.
+ *
+ * @NL80211_ATTR_INTERFACE_COMBINATIONS: Nested attribute listing the supported
+ * interface combinations. In each nested item, it contains attributes
+ * defined in &enum nl80211_if_combination_attrs.
+ * @NL80211_ATTR_SOFTWARE_IFTYPES: Nested attribute (just like
+ * %NL80211_ATTR_SUPPORTED_IFTYPES) containing the interface types that
+ * are managed in software: interfaces of these types aren't subject to
+ * any restrictions in their number or combinations.
+ *
+ * @%NL80211_ATTR_REKEY_DATA: nested attribute containing the information
+ * necessary for GTK rekeying in the device, see &enum nl80211_rekey_data.
+ *
+ * @NL80211_ATTR_SCAN_SUPP_RATES: rates per to be advertised as supported in scan,
+ * nested array attribute containing an entry for each band, with the entry
+ * being a list of supported rates as defined by IEEE 802.11 7.3.2.2 but
+ * without the length restriction (at most %NL80211_MAX_SUPP_RATES).
+ *
+ * @NL80211_ATTR_HIDDEN_SSID: indicates whether SSID is to be hidden from Beacon
+ * and Probe Response (when response to wildcard Probe Request); see
+ * &enum nl80211_hidden_ssid, represented as a u32
+ *
+ * @NL80211_ATTR_IE_PROBE_RESP: Information element(s) for Probe Response frame.
+ * This is used with %NL80211_CMD_NEW_BEACON and %NL80211_CMD_SET_BEACON to
+ * provide extra IEs (e.g., WPS/P2P IE) into Probe Response frames when the
+ * driver (or firmware) replies to Probe Request frames.
+ * @NL80211_ATTR_IE_ASSOC_RESP: Information element(s) for (Re)Association
+ * Response frames. This is used with %NL80211_CMD_NEW_BEACON and
+ * %NL80211_CMD_SET_BEACON to provide extra IEs (e.g., WPS/P2P IE) into
+ * (Re)Association Response frames when the driver (or firmware) replies to
+ * (Re)Association Request frames.
+ *
+ * @NL80211_ATTR_STA_WME: Nested attribute containing the wme configuration
+ * of the station, see &enum nl80211_sta_wme_attr.
+ * @NL80211_ATTR_SUPPORT_AP_UAPSD: the device supports uapsd when working
+ * as AP.
+ *
+ * @NL80211_ATTR_ROAM_SUPPORT: Indicates whether the firmware is capable of
+ * roaming to another AP in the same ESS if the signal lever is low.
+ *
+ * @NL80211_ATTR_PMKSA_CANDIDATE: Nested attribute containing the PMKSA caching
+ * candidate information, see &enum nl80211_pmksa_candidate_attr.
+ *
+ * @NL80211_ATTR_TX_NO_CCK_RATE: Indicates whether to use CCK rate or not
+ * for management frames transmission. In order to avoid p2p probe/action
+ * frames are being transmitted at CCK rate in 2GHz band, the user space
+ * applications use this attribute.
+ * This attribute is used with %NL80211_CMD_TRIGGER_SCAN and
+ * %NL80211_CMD_FRAME commands.
+ *
+ * @NL80211_ATTR_TDLS_ACTION: Low level TDLS action code (e.g. link setup
+ * request, link setup confirm, link teardown, etc.). Values are
+ * described in the TDLS (802.11z) specification.
+ * @NL80211_ATTR_TDLS_DIALOG_TOKEN: Non-zero token for uniquely identifying a
+ * TDLS conversation between two devices.
+ * @NL80211_ATTR_TDLS_OPERATION: High level TDLS operation; see
+ * &enum nl80211_tdls_operation, represented as a u8.
+ * @NL80211_ATTR_TDLS_SUPPORT: A flag indicating the device can operate
+ * as a TDLS peer sta.
+ * @NL80211_ATTR_TDLS_EXTERNAL_SETUP: The TDLS discovery/setup and teardown
+ * procedures should be performed by sending TDLS packets via
+ * %NL80211_CMD_TDLS_MGMT. Otherwise %NL80211_CMD_TDLS_OPER should be
+ * used for asking the driver to perform a TDLS operation.
+ *
+ * @NL80211_ATTR_DEVICE_AP_SME: This u32 attribute may be listed for devices
+ * that have AP support to indicate that they have the AP SME integrated
+ * with support for the features listed in this attribute, see
+ * &enum nl80211_ap_sme_features.
+ *
+ * @NL80211_ATTR_DONT_WAIT_FOR_ACK: Used with %NL80211_CMD_FRAME, this tells
+ * the driver to not wait for an acknowledgement. Note that due to this,
+ * it will also not give a status callback nor return a cookie. This is
+ * mostly useful for probe responses to save airtime.
+ *
+ * @NL80211_ATTR_FEATURE_FLAGS: This u32 attribute contains flags from
+ * &enum nl80211_feature_flags and is advertised in wiphy information.
+ * @NL80211_ATTR_PROBE_RESP_OFFLOAD: Indicates that the HW responds to probe
+ *
+ * requests while operating in AP-mode.
+ * This attribute holds a bitmap of the supported protocols for
+ * offloading (see &enum nl80211_probe_resp_offload_support_attr).
+ *
+ * @NL80211_ATTR_PROBE_RESP: Probe Response template data. Contains the entire
+ * probe-response frame. The DA field in the 802.11 header is zero-ed out,
+ * to be filled by the FW.
+ * @NL80211_ATTR_DISABLE_HT: Force HT capable interfaces to disable
+ * this feature. Currently, only supported in mac80211 drivers.
+ * @NL80211_ATTR_HT_CAPABILITY_MASK: Specify which bits of the
+ * ATTR_HT_CAPABILITY to which attention should be paid.
+ * Currently, only mac80211 NICs support this feature.
+ * The values that may be configured are:
+ * MCS rates, MAX-AMSDU, HT-20-40 and HT_CAP_SGI_40
+ * AMPDU density and AMPDU factor.
+ * All values are treated as suggestions and may be ignored
+ * by the driver as required. The actual values may be seen in
+ * the station debugfs ht_caps file.
+ *
+ * @NL80211_ATTR_DFS_REGION: region for regulatory rules which this country
+ * abides to when initiating radiation on DFS channels. A country maps
+ * to one DFS region.
+ *
+ * @NL80211_ATTR_NOACK_MAP: This u16 bitmap contains the No Ack Policy of
+ * up to 16 TIDs.
+ *
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
*/
enum nl80211_attrs {
-/* don't change the order or add anything inbetween, this is ABI! */
+/* don't change the order or add anything between, this is ABI! */
NL80211_ATTR_UNSPEC,
NL80211_ATTR_WIPHY,
@@ -860,7 +1247,7 @@ enum nl80211_attrs {
NL80211_ATTR_REG_ALPHA2,
NL80211_ATTR_REG_RULES,
- NL80211_ATTR_MESH_PARAMS,
+ NL80211_ATTR_MESH_CONFIG,
NL80211_ATTR_BSS_BASIC_RATES,
@@ -975,8 +1362,82 @@ enum nl80211_attrs {
NL80211_ATTR_SUPPORT_IBSS_RSN,
+ NL80211_ATTR_WIPHY_ANTENNA_TX,
+ NL80211_ATTR_WIPHY_ANTENNA_RX,
+
NL80211_ATTR_MCAST_RATE,
+ NL80211_ATTR_OFFCHANNEL_TX_OK,
+
+ NL80211_ATTR_BSS_HT_OPMODE,
+
+ NL80211_ATTR_KEY_DEFAULT_TYPES,
+
+ NL80211_ATTR_MAX_REMAIN_ON_CHANNEL_DURATION,
+
+ NL80211_ATTR_MESH_SETUP,
+
+ NL80211_ATTR_WIPHY_ANTENNA_AVAIL_TX,
+ NL80211_ATTR_WIPHY_ANTENNA_AVAIL_RX,
+
+ NL80211_ATTR_SUPPORT_MESH_AUTH,
+ NL80211_ATTR_STA_PLINK_STATE,
+
+ NL80211_ATTR_WOWLAN_TRIGGERS,
+ NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED,
+
+ NL80211_ATTR_SCHED_SCAN_INTERVAL,
+
+ NL80211_ATTR_INTERFACE_COMBINATIONS,
+ NL80211_ATTR_SOFTWARE_IFTYPES,
+
+ NL80211_ATTR_REKEY_DATA,
+
+ NL80211_ATTR_MAX_NUM_SCHED_SCAN_SSIDS,
+ NL80211_ATTR_MAX_SCHED_SCAN_IE_LEN,
+
+ NL80211_ATTR_SCAN_SUPP_RATES,
+
+ NL80211_ATTR_HIDDEN_SSID,
+
+ NL80211_ATTR_IE_PROBE_RESP,
+ NL80211_ATTR_IE_ASSOC_RESP,
+
+ NL80211_ATTR_STA_WME,
+ NL80211_ATTR_SUPPORT_AP_UAPSD,
+
+ NL80211_ATTR_ROAM_SUPPORT,
+
+ NL80211_ATTR_SCHED_SCAN_MATCH,
+ NL80211_ATTR_MAX_MATCH_SETS,
+
+ NL80211_ATTR_PMKSA_CANDIDATE,
+
+ NL80211_ATTR_TX_NO_CCK_RATE,
+
+ NL80211_ATTR_TDLS_ACTION,
+ NL80211_ATTR_TDLS_DIALOG_TOKEN,
+ NL80211_ATTR_TDLS_OPERATION,
+ NL80211_ATTR_TDLS_SUPPORT,
+ NL80211_ATTR_TDLS_EXTERNAL_SETUP,
+
+ NL80211_ATTR_DEVICE_AP_SME,
+
+ NL80211_ATTR_DONT_WAIT_FOR_ACK,
+
+ NL80211_ATTR_FEATURE_FLAGS,
+
+ NL80211_ATTR_PROBE_RESP_OFFLOAD,
+
+ NL80211_ATTR_PROBE_RESP,
+
+ NL80211_ATTR_DFS_REGION,
+
+ NL80211_ATTR_DISABLE_HT,
+ NL80211_ATTR_HT_CAPABILITY_MASK,
+
+ NL80211_ATTR_NOACK_MAP,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
@@ -985,6 +1446,7 @@ enum nl80211_attrs {
/* source-level API compatibility */
#define NL80211_ATTR_SCAN_GENERATION NL80211_ATTR_GENERATION
+#define NL80211_ATTR_MESH_PARAMS NL80211_ATTR_MESH_CONFIG
/*
* Allow user space programs to use #ifdef on new attributes by defining them
@@ -1010,8 +1472,10 @@ enum nl80211_attrs {
#define NL80211_ATTR_AKM_SUITES NL80211_ATTR_AKM_SUITES
#define NL80211_ATTR_KEY NL80211_ATTR_KEY
#define NL80211_ATTR_KEYS NL80211_ATTR_KEYS
+#define NL80211_ATTR_FEATURE_FLAGS NL80211_ATTR_FEATURE_FLAGS
#define NL80211_MAX_SUPP_RATES 32
+#define NL80211_MAX_SUPP_HT_RATES 77
#define NL80211_MAX_SUPP_REG_RULES 32
#define NL80211_TKIP_DATA_OFFSET_ENCR_KEY 0
#define NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY 16
@@ -1028,7 +1492,9 @@ enum nl80211_attrs {
* @NL80211_IFTYPE_ADHOC: independent BSS member
* @NL80211_IFTYPE_STATION: managed BSS member
* @NL80211_IFTYPE_AP: access point
- * @NL80211_IFTYPE_AP_VLAN: VLAN interface for access points
+ * @NL80211_IFTYPE_AP_VLAN: VLAN interface for access points; VLAN interfaces
+ * are a bit special in that they must always be tied to a pre-existing
+ * AP type interface.
* @NL80211_IFTYPE_WDS: wireless distribution interface
* @NL80211_IFTYPE_MONITOR: monitor interface receiving all frames
* @NL80211_IFTYPE_MESH_POINT: mesh point
@@ -1070,6 +1536,12 @@ enum nl80211_iftype {
* with short barker preamble
* @NL80211_STA_FLAG_WME: station is WME/QoS capable
* @NL80211_STA_FLAG_MFP: station uses management frame protection
+ * @NL80211_STA_FLAG_AUTHENTICATED: station is authenticated
+ * @NL80211_STA_FLAG_TDLS_PEER: station is a TDLS peer -- this flag should
+ * only be used in managed mode (even in the flags mask). Note that the
+ * flag can't be changed, it is only valid while adding a station, and
+ * attempts to change it will silently be ignored (rather than rejected
+ * as errors.)
* @NL80211_STA_FLAG_MAX: highest station flag number currently defined
* @__NL80211_STA_FLAG_AFTER_LAST: internal use
*/
@@ -1079,6 +1551,8 @@ enum nl80211_sta_flags {
NL80211_STA_FLAG_SHORT_PREAMBLE,
NL80211_STA_FLAG_WME,
NL80211_STA_FLAG_MFP,
+ NL80211_STA_FLAG_AUTHENTICATED,
+ NL80211_STA_FLAG_TDLS_PEER,
/* keep last */
__NL80211_STA_FLAG_AFTER_LAST,
@@ -1124,6 +1598,36 @@ enum nl80211_rate_info {
};
/**
+ * enum nl80211_sta_bss_param - BSS information collected by STA
+ *
+ * These attribute types are used with %NL80211_STA_INFO_BSS_PARAM
+ * when getting information about the bitrate of a station.
+ *
+ * @__NL80211_STA_BSS_PARAM_INVALID: attribute number 0 is reserved
+ * @NL80211_STA_BSS_PARAM_CTS_PROT: whether CTS protection is enabled (flag)
+ * @NL80211_STA_BSS_PARAM_SHORT_PREAMBLE: whether short preamble is enabled
+ * (flag)
+ * @NL80211_STA_BSS_PARAM_SHORT_SLOT_TIME: whether short slot time is enabled
+ * (flag)
+ * @NL80211_STA_BSS_PARAM_DTIM_PERIOD: DTIM period for beaconing (u8)
+ * @NL80211_STA_BSS_PARAM_BEACON_INTERVAL: Beacon interval (u16)
+ * @NL80211_STA_BSS_PARAM_MAX: highest sta_bss_param number currently defined
+ * @__NL80211_STA_BSS_PARAM_AFTER_LAST: internal use
+ */
+enum nl80211_sta_bss_param {
+ __NL80211_STA_BSS_PARAM_INVALID,
+ NL80211_STA_BSS_PARAM_CTS_PROT,
+ NL80211_STA_BSS_PARAM_SHORT_PREAMBLE,
+ NL80211_STA_BSS_PARAM_SHORT_SLOT_TIME,
+ NL80211_STA_BSS_PARAM_DTIM_PERIOD,
+ NL80211_STA_BSS_PARAM_BEACON_INTERVAL,
+
+ /* keep last */
+ __NL80211_STA_BSS_PARAM_AFTER_LAST,
+ NL80211_STA_BSS_PARAM_MAX = __NL80211_STA_BSS_PARAM_AFTER_LAST - 1
+};
+
+/**
* enum nl80211_sta_info - station information
*
* These attribute types are used with %NL80211_ATTR_STA_INFO
@@ -1133,16 +1637,30 @@ enum nl80211_rate_info {
* @NL80211_STA_INFO_INACTIVE_TIME: time since last activity (u32, msecs)
* @NL80211_STA_INFO_RX_BYTES: total received bytes (u32, from this station)
* @NL80211_STA_INFO_TX_BYTES: total transmitted bytes (u32, to this station)
- * @__NL80211_STA_INFO_AFTER_LAST: internal
- * @NL80211_STA_INFO_MAX: highest possible station info attribute
* @NL80211_STA_INFO_SIGNAL: signal strength of last received PPDU (u8, dBm)
* @NL80211_STA_INFO_TX_BITRATE: current unicast tx rate, nested attribute
- * containing info as possible, see &enum nl80211_sta_info_txrate.
+ * containing info as possible, see &enum nl80211_rate_info
* @NL80211_STA_INFO_RX_PACKETS: total received packet (u32, from this station)
* @NL80211_STA_INFO_TX_PACKETS: total transmitted packets (u32, to this
* station)
* @NL80211_STA_INFO_TX_RETRIES: total retries (u32, to this station)
* @NL80211_STA_INFO_TX_FAILED: total failed packets (u32, to this station)
+ * @NL80211_STA_INFO_SIGNAL_AVG: signal strength average (u8, dBm)
+ * @NL80211_STA_INFO_LLID: the station's mesh LLID
+ * @NL80211_STA_INFO_PLID: the station's mesh PLID
+ * @NL80211_STA_INFO_PLINK_STATE: peer link state for the station
+ * (see %enum nl80211_plink_state)
+ * @NL80211_STA_INFO_RX_BITRATE: last unicast data frame rx rate, nested
+ * attribute, like NL80211_STA_INFO_TX_BITRATE.
+ * @NL80211_STA_INFO_BSS_PARAM: current station's view of BSS, nested attribute
+ * containing info as possible, see &enum nl80211_sta_bss_param
+ * @NL80211_STA_INFO_CONNECTED_TIME: time since the station is last connected
+ * @NL80211_STA_INFO_STA_FLAGS: Contains a struct nl80211_sta_flag_update.
+ * @NL80211_STA_INFO_BEACON_LOSS: count of times beacon loss was detected (u32)
+ * @NL80211_STA_INFO_CHAIN_SIGNAL: per-chain signal strength of last PPDU
+ * @NL80211_STA_INFO_CHAIN_SIGNAL_AVG: per-chain signal strength average
+ * @__NL80211_STA_INFO_AFTER_LAST: internal
+ * @NL80211_STA_INFO_MAX: highest possible station info attribute
*/
enum nl80211_sta_info {
__NL80211_STA_INFO_INVALID,
@@ -1158,6 +1676,14 @@ enum nl80211_sta_info {
NL80211_STA_INFO_TX_PACKETS,
NL80211_STA_INFO_TX_RETRIES,
NL80211_STA_INFO_TX_FAILED,
+ NL80211_STA_INFO_SIGNAL_AVG,
+ NL80211_STA_INFO_RX_BITRATE,
+ NL80211_STA_INFO_BSS_PARAM,
+ NL80211_STA_INFO_CONNECTED_TIME,
+ NL80211_STA_INFO_STA_FLAGS,
+ NL80211_STA_INFO_BEACON_LOSS,
+ NL80211_STA_INFO_CHAIN_SIGNAL,
+ NL80211_STA_INFO_CHAIN_SIGNAL_AVG,
/* keep last */
__NL80211_STA_INFO_AFTER_LAST,
@@ -1311,7 +1837,11 @@ enum nl80211_bitrate_attr {
* wireless core it thinks its knows the regulatory domain we should be in.
* @NL80211_REGDOM_SET_BY_COUNTRY_IE: the wireless core has received an
* 802.11 country information element with regulatory information it
- * thinks we should consider.
+ * thinks we should consider. cfg80211 only processes the country
+ * code from the IE, and relies on the regulatory domain information
+ * structure passed by userspace (CRDA) from our wireless-regdb.
+ * If a channel is enabled but the country code indicates it should
+ * be disabled we disable the channel and re-enable it upon disassociation.
*/
enum nl80211_reg_initiator {
NL80211_REGDOM_SET_BY_CORE,
@@ -1383,6 +1913,26 @@ enum nl80211_reg_rule_attr {
};
/**
+ * enum nl80211_sched_scan_match_attr - scheduled scan match attributes
+ * @__NL80211_SCHED_SCAN_MATCH_ATTR_INVALID: attribute number 0 is reserved
+ * @NL80211_SCHED_SCAN_MATCH_ATTR_SSID: SSID to be used for matching,
+ * only report BSS with matching SSID.
+ * @NL80211_SCHED_SCAN_MATCH_ATTR_MAX: highest scheduled scan filter
+ * attribute number currently defined
+ * @__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST: internal use
+ */
+enum nl80211_sched_scan_match_attr {
+ __NL80211_SCHED_SCAN_MATCH_ATTR_INVALID,
+
+ NL80211_ATTR_SCHED_SCAN_MATCH_SSID,
+
+ /* keep last */
+ __NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST,
+ NL80211_SCHED_SCAN_MATCH_ATTR_MAX =
+ __NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST - 1
+};
+
+/**
* enum nl80211_reg_rule_flags - regulatory rule flags
*
* @NL80211_RRF_NO_OFDM: OFDM modulation not allowed
@@ -1408,6 +1958,21 @@ enum nl80211_reg_rule_flags {
};
/**
+ * enum nl80211_dfs_regions - regulatory DFS regions
+ *
+ * @NL80211_DFS_UNSET: Country has no DFS master region specified
+ * @NL80211_DFS_FCC_: Country follows DFS master rules from FCC
+ * @NL80211_DFS_FCC_: Country follows DFS master rules from ETSI
+ * @NL80211_DFS_JP_: Country follows DFS master rules from JP/MKK/Telec
+ */
+enum nl80211_dfs_regions {
+ NL80211_DFS_UNSET = 0,
+ NL80211_DFS_FCC = 1,
+ NL80211_DFS_ETSI = 2,
+ NL80211_DFS_JP = 3,
+};
+
+/**
* enum nl80211_survey_info - survey information
*
* These attribute types are used with %NL80211_ATTR_SURVEY_INFO
@@ -1480,14 +2045,15 @@ enum nl80211_mntr_flags {
/**
* enum nl80211_meshconf_params - mesh configuration parameters
*
- * Mesh configuration parameters
+ * Mesh configuration parameters. These can be changed while the mesh is
+ * active.
*
* @__NL80211_MESHCONF_INVALID: internal use
*
* @NL80211_MESHCONF_RETRY_TIMEOUT: specifies the initial retry timeout in
* millisecond units, used by the Peer Link Open message
*
- * @NL80211_MESHCONF_CONFIRM_TIMEOUT: specifies the inital confirm timeout, in
+ * @NL80211_MESHCONF_CONFIRM_TIMEOUT: specifies the initial confirm timeout, in
* millisecond units, used by the peer link management to close a peer link
*
* @NL80211_MESHCONF_HOLDING_TIMEOUT: specifies the holding timeout, in
@@ -1527,7 +2093,24 @@ enum nl80211_mntr_flags {
* @NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME: The interval of time (in TUs)
* that it takes for an HWMP information element to propagate across the mesh
*
- * @NL80211_MESHCONF_ROOTMODE: whether root mode is enabled or not
+ * @NL80211_MESHCONF_HWMP_ROOTMODE: whether root mode is enabled or not
+ *
+ * @NL80211_MESHCONF_ELEMENT_TTL: specifies the value of TTL field set at a
+ * source mesh point for path selection elements.
+ *
+ * @NL80211_MESHCONF_HWMP_RANN_INTERVAL: The interval of time (in TUs) between
+ * root announcements are transmitted.
+ *
+ * @NL80211_MESHCONF_GATE_ANNOUNCEMENTS: Advertise that this mesh station has
+ * access to a broader network beyond the MBSS. This is done via Root
+ * Announcement frames.
+ *
+ * @NL80211_MESHCONF_HWMP_PERR_MIN_INTERVAL: The minimum interval of time (in
+ * TUs) during which a mesh STA can send only one Action frame containing a
+ * PERR element.
+ *
+ * @NL80211_MESHCONF_FORWARDING: set Mesh STA as forwarding or non-forwarding
+ * or forwarding entity (default is TRUE - forwarding entity)
*
* @NL80211_MESHCONF_ATTR_MAX: highest possible mesh configuration attribute
*
@@ -1549,6 +2132,11 @@ enum nl80211_meshconf_params {
NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL,
NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME,
NL80211_MESHCONF_HWMP_ROOTMODE,
+ NL80211_MESHCONF_ELEMENT_TTL,
+ NL80211_MESHCONF_HWMP_RANN_INTERVAL,
+ NL80211_MESHCONF_GATE_ANNOUNCEMENTS,
+ NL80211_MESHCONF_HWMP_PERR_MIN_INTERVAL,
+ NL80211_MESHCONF_FORWARDING,
/* keep last */
__NL80211_MESHCONF_ATTR_AFTER_LAST,
@@ -1556,6 +2144,54 @@ enum nl80211_meshconf_params {
};
/**
+ * enum nl80211_mesh_setup_params - mesh setup parameters
+ *
+ * Mesh setup parameters. These are used to start/join a mesh and cannot be
+ * changed while the mesh is active.
+ *
+ * @__NL80211_MESH_SETUP_INVALID: Internal use
+ *
+ * @NL80211_MESH_SETUP_ENABLE_VENDOR_PATH_SEL: Enable this option to use a
+ * vendor specific path selection algorithm or disable it to use the default
+ * HWMP.
+ *
+ * @NL80211_MESH_SETUP_ENABLE_VENDOR_METRIC: Enable this option to use a
+ * vendor specific path metric or disable it to use the default Airtime
+ * metric.
+ *
+ * @NL80211_MESH_SETUP_IE: Information elements for this mesh, for instance, a
+ * robust security network ie, or a vendor specific information element that
+ * vendors will use to identify the path selection methods and metrics in use.
+ *
+ * @NL80211_MESH_SETUP_USERSPACE_AUTH: Enable this option if an authentication
+ * daemon will be authenticating mesh candidates.
+ *
+ * @NL80211_MESH_SETUP_USERSPACE_AMPE: Enable this option if an authentication
+ * daemon will be securing peer link frames. AMPE is a secured version of Mesh
+ * Peering Management (MPM) and is implemented with the assistance of a
+ * userspace daemon. When this flag is set, the kernel will send peer
+ * management frames to a userspace daemon that will implement AMPE
+ * functionality (security capabilities selection, key confirmation, and key
+ * management). When the flag is unset (default), the kernel can autonomously
+ * complete (unsecured) mesh peering without the need of a userspace daemon.
+ *
+ * @NL80211_MESH_SETUP_ATTR_MAX: highest possible mesh setup attribute number
+ * @__NL80211_MESH_SETUP_ATTR_AFTER_LAST: Internal use
+ */
+enum nl80211_mesh_setup_params {
+ __NL80211_MESH_SETUP_INVALID,
+ NL80211_MESH_SETUP_ENABLE_VENDOR_PATH_SEL,
+ NL80211_MESH_SETUP_ENABLE_VENDOR_METRIC,
+ NL80211_MESH_SETUP_IE,
+ NL80211_MESH_SETUP_USERSPACE_AUTH,
+ NL80211_MESH_SETUP_USERSPACE_AMPE,
+
+ /* keep last */
+ __NL80211_MESH_SETUP_ATTR_AFTER_LAST,
+ NL80211_MESH_SETUP_ATTR_MAX = __NL80211_MESH_SETUP_ATTR_AFTER_LAST - 1
+};
+
+/**
* enum nl80211_txq_attr - TX queue parameter attributes
* @__NL80211_TXQ_ATTR_INVALID: Attribute number 0 is reserved
* @NL80211_TXQ_ATTR_QUEUE: TX queue identifier (NL80211_TXQ_Q_*)
@@ -1713,6 +2349,23 @@ enum nl80211_wpa_versions {
};
/**
+ * enum nl80211_key_default_types - key default types
+ * @__NL80211_KEY_DEFAULT_TYPE_INVALID: invalid
+ * @NL80211_KEY_DEFAULT_TYPE_UNICAST: key should be used as default
+ * unicast key
+ * @NL80211_KEY_DEFAULT_TYPE_MULTICAST: key should be used as default
+ * multicast key
+ * @NUM_NL80211_KEY_DEFAULT_TYPES: number of default types
+ */
+enum nl80211_key_default_types {
+ __NL80211_KEY_DEFAULT_TYPE_INVALID,
+ NL80211_KEY_DEFAULT_TYPE_UNICAST,
+ NL80211_KEY_DEFAULT_TYPE_MULTICAST,
+
+ NUM_NL80211_KEY_DEFAULT_TYPES
+};
+
+/**
* enum nl80211_key_attributes - key attributes
* @__NL80211_KEY_INVALID: invalid
* @NL80211_KEY_DATA: (temporal) key data; for TKIP this consists of
@@ -1728,6 +2381,9 @@ enum nl80211_wpa_versions {
* @NL80211_KEY_TYPE: the key type from enum nl80211_key_type, if not
* specified the default depends on whether a MAC address was
* given with the command using the key or not (u32)
+ * @NL80211_KEY_DEFAULT_TYPES: A nested attribute containing flags
+ * attributes, specifying what a key should be set as default as.
+ * See &enum nl80211_key_default_types.
* @__NL80211_KEY_AFTER_LAST: internal
* @NL80211_KEY_MAX: highest key attribute
*/
@@ -1740,6 +2396,7 @@ enum nl80211_key_attributes {
NL80211_KEY_DEFAULT,
NL80211_KEY_DEFAULT_MGMT,
NL80211_KEY_TYPE,
+ NL80211_KEY_DEFAULT_TYPES,
/* keep last */
__NL80211_KEY_AFTER_LAST,
@@ -1753,12 +2410,15 @@ enum nl80211_key_attributes {
* in an array of rates as defined in IEEE 802.11 7.3.2.2 (u8 values with
* 1 = 500 kbps) but without the IE length restriction (at most
* %NL80211_MAX_SUPP_RATES in a single array).
+ * @NL80211_TXRATE_MCS: HT (MCS) rates allowed for TX rate selection
+ * in an array of MCS numbers.
* @__NL80211_TXRATE_AFTER_LAST: internal
* @NL80211_TXRATE_MAX: highest TX rate attribute
*/
enum nl80211_tx_rate_attributes {
__NL80211_TXRATE_INVALID,
NL80211_TXRATE_LEGACY,
+ NL80211_TXRATE_MCS,
/* keep last */
__NL80211_TXRATE_AFTER_LAST,
@@ -1790,6 +2450,8 @@ enum nl80211_ps_state {
* the minimum amount the RSSI level must change after an event before a
* new event may be issued (to reduce effects of RSSI oscillation).
* @NL80211_ATTR_CQM_RSSI_THRESHOLD_EVENT: RSSI threshold event
+ * @NL80211_ATTR_CQM_PKT_LOSS_EVENT: a u32 value indicating that this many
+ * consecutive packets were not acknowledged by the peer
* @__NL80211_ATTR_CQM_AFTER_LAST: internal
* @NL80211_ATTR_CQM_MAX: highest key attribute
*/
@@ -1798,6 +2460,7 @@ enum nl80211_attr_cqm {
NL80211_ATTR_CQM_RSSI_THOLD,
NL80211_ATTR_CQM_RSSI_HYST,
NL80211_ATTR_CQM_RSSI_THRESHOLD_EVENT,
+ NL80211_ATTR_CQM_PKT_LOSS_EVENT,
/* keep last */
__NL80211_ATTR_CQM_AFTER_LAST,
@@ -1829,4 +2492,343 @@ enum nl80211_tx_power_setting {
NL80211_TX_POWER_FIXED,
};
+/**
+ * enum nl80211_wowlan_packet_pattern_attr - WoWLAN packet pattern attribute
+ * @__NL80211_WOWLAN_PKTPAT_INVALID: invalid number for nested attribute
+ * @NL80211_WOWLAN_PKTPAT_PATTERN: the pattern, values where the mask has
+ * a zero bit are ignored
+ * @NL80211_WOWLAN_PKTPAT_MASK: pattern mask, must be long enough to have
+ * a bit for each byte in the pattern. The lowest-order bit corresponds
+ * to the first byte of the pattern, but the bytes of the pattern are
+ * in a little-endian-like format, i.e. the 9th byte of the pattern
+ * corresponds to the lowest-order bit in the second byte of the mask.
+ * For example: The match 00:xx:00:00:xx:00:00:00:00:xx:xx:xx (where
+ * xx indicates "don't care") would be represented by a pattern of
+ * twelve zero bytes, and a mask of "0xed,0x07".
+ * Note that the pattern matching is done as though frames were not
+ * 802.11 frames but 802.3 frames, i.e. the frame is fully unpacked
+ * first (including SNAP header unpacking) and then matched.
+ * @NUM_NL80211_WOWLAN_PKTPAT: number of attributes
+ * @MAX_NL80211_WOWLAN_PKTPAT: max attribute number
+ */
+enum nl80211_wowlan_packet_pattern_attr {
+ __NL80211_WOWLAN_PKTPAT_INVALID,
+ NL80211_WOWLAN_PKTPAT_MASK,
+ NL80211_WOWLAN_PKTPAT_PATTERN,
+
+ NUM_NL80211_WOWLAN_PKTPAT,
+ MAX_NL80211_WOWLAN_PKTPAT = NUM_NL80211_WOWLAN_PKTPAT - 1,
+};
+
+/**
+ * struct nl80211_wowlan_pattern_support - pattern support information
+ * @max_patterns: maximum number of patterns supported
+ * @min_pattern_len: minimum length of each pattern
+ * @max_pattern_len: maximum length of each pattern
+ *
+ * This struct is carried in %NL80211_WOWLAN_TRIG_PKT_PATTERN when
+ * that is part of %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED in the
+ * capability information given by the kernel to userspace.
+ */
+struct nl80211_wowlan_pattern_support {
+ __u32 max_patterns;
+ __u32 min_pattern_len;
+ __u32 max_pattern_len;
+} __attribute__((packed));
+
+/**
+ * enum nl80211_wowlan_triggers - WoWLAN trigger definitions
+ * @__NL80211_WOWLAN_TRIG_INVALID: invalid number for nested attributes
+ * @NL80211_WOWLAN_TRIG_ANY: wake up on any activity, do not really put
+ * the chip into a special state -- works best with chips that have
+ * support for low-power operation already (flag)
+ * @NL80211_WOWLAN_TRIG_DISCONNECT: wake up on disconnect, the way disconnect
+ * is detected is implementation-specific (flag)
+ * @NL80211_WOWLAN_TRIG_MAGIC_PKT: wake up on magic packet (6x 0xff, followed
+ * by 16 repetitions of MAC addr, anywhere in payload) (flag)
+ * @NL80211_WOWLAN_TRIG_PKT_PATTERN: wake up on the specified packet patterns
+ * which are passed in an array of nested attributes, each nested attribute
+ * defining a with attributes from &struct nl80211_wowlan_trig_pkt_pattern.
+ * Each pattern defines a wakeup packet. The matching is done on the MSDU,
+ * i.e. as though the packet was an 802.3 packet, so the pattern matching
+ * is done after the packet is converted to the MSDU.
+ *
+ * In %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED, it is a binary attribute
+ * carrying a &struct nl80211_wowlan_pattern_support.
+ * @NL80211_WOWLAN_TRIG_GTK_REKEY_SUPPORTED: Not a real trigger, and cannot be
+ * used when setting, used only to indicate that GTK rekeying is supported
+ * by the device (flag)
+ * @NL80211_WOWLAN_TRIG_GTK_REKEY_FAILURE: wake up on GTK rekey failure (if
+ * done by the device) (flag)
+ * @NL80211_WOWLAN_TRIG_EAP_IDENT_REQUEST: wake up on EAP Identity Request
+ * packet (flag)
+ * @NL80211_WOWLAN_TRIG_4WAY_HANDSHAKE: wake up on 4-way handshake (flag)
+ * @NL80211_WOWLAN_TRIG_RFKILL_RELEASE: wake up when rfkill is released
+ * (on devices that have rfkill in the device) (flag)
+ * @NUM_NL80211_WOWLAN_TRIG: number of wake on wireless triggers
+ * @MAX_NL80211_WOWLAN_TRIG: highest wowlan trigger attribute number
+ */
+enum nl80211_wowlan_triggers {
+ __NL80211_WOWLAN_TRIG_INVALID,
+ NL80211_WOWLAN_TRIG_ANY,
+ NL80211_WOWLAN_TRIG_DISCONNECT,
+ NL80211_WOWLAN_TRIG_MAGIC_PKT,
+ NL80211_WOWLAN_TRIG_PKT_PATTERN,
+ NL80211_WOWLAN_TRIG_GTK_REKEY_SUPPORTED,
+ NL80211_WOWLAN_TRIG_GTK_REKEY_FAILURE,
+ NL80211_WOWLAN_TRIG_EAP_IDENT_REQUEST,
+ NL80211_WOWLAN_TRIG_4WAY_HANDSHAKE,
+ NL80211_WOWLAN_TRIG_RFKILL_RELEASE,
+
+ /* keep last */
+ NUM_NL80211_WOWLAN_TRIG,
+ MAX_NL80211_WOWLAN_TRIG = NUM_NL80211_WOWLAN_TRIG - 1
+};
+
+/**
+ * enum nl80211_iface_limit_attrs - limit attributes
+ * @NL80211_IFACE_LIMIT_UNSPEC: (reserved)
+ * @NL80211_IFACE_LIMIT_MAX: maximum number of interfaces that
+ * can be chosen from this set of interface types (u32)
+ * @NL80211_IFACE_LIMIT_TYPES: nested attribute containing a
+ * flag attribute for each interface type in this set
+ * @NUM_NL80211_IFACE_LIMIT: number of attributes
+ * @MAX_NL80211_IFACE_LIMIT: highest attribute number
+ */
+enum nl80211_iface_limit_attrs {
+ NL80211_IFACE_LIMIT_UNSPEC,
+ NL80211_IFACE_LIMIT_MAX,
+ NL80211_IFACE_LIMIT_TYPES,
+
+ /* keep last */
+ NUM_NL80211_IFACE_LIMIT,
+ MAX_NL80211_IFACE_LIMIT = NUM_NL80211_IFACE_LIMIT - 1
+};
+
+/**
+ * enum nl80211_if_combination_attrs -- interface combination attributes
+ *
+ * @NL80211_IFACE_COMB_UNSPEC: (reserved)
+ * @NL80211_IFACE_COMB_LIMITS: Nested attributes containing the limits
+ * for given interface types, see &enum nl80211_iface_limit_attrs.
+ * @NL80211_IFACE_COMB_MAXNUM: u32 attribute giving the total number of
+ * interfaces that can be created in this group. This number doesn't
+ * apply to interfaces purely managed in software, which are listed
+ * in a separate attribute %NL80211_ATTR_INTERFACES_SOFTWARE.
+ * @NL80211_IFACE_COMB_STA_AP_BI_MATCH: flag attribute specifying that
+ * beacon intervals within this group must be all the same even for
+ * infrastructure and AP/GO combinations, i.e. the GO(s) must adopt
+ * the infrastructure network's beacon interval.
+ * @NL80211_IFACE_COMB_NUM_CHANNELS: u32 attribute specifying how many
+ * different channels may be used within this group.
+ * @NUM_NL80211_IFACE_COMB: number of attributes
+ * @MAX_NL80211_IFACE_COMB: highest attribute number
+ *
+ * Examples:
+ * limits = [ #{STA} <= 1, #{AP} <= 1 ], matching BI, channels = 1, max = 2
+ * => allows an AP and a STA that must match BIs
+ *
+ * numbers = [ #{AP, P2P-GO} <= 8 ], channels = 1, max = 8
+ * => allows 8 of AP/GO
+ *
+ * numbers = [ #{STA} <= 2 ], channels = 2, max = 2
+ * => allows two STAs on different channels
+ *
+ * numbers = [ #{STA} <= 1, #{P2P-client,P2P-GO} <= 3 ], max = 4
+ * => allows a STA plus three P2P interfaces
+ *
+ * The list of these four possiblities could completely be contained
+ * within the %NL80211_ATTR_INTERFACE_COMBINATIONS attribute to indicate
+ * that any of these groups must match.
+ *
+ * "Combinations" of just a single interface will not be listed here,
+ * a single interface of any valid interface type is assumed to always
+ * be possible by itself. This means that implicitly, for each valid
+ * interface type, the following group always exists:
+ * numbers = [ #{<type>} <= 1 ], channels = 1, max = 1
+ */
+enum nl80211_if_combination_attrs {
+ NL80211_IFACE_COMB_UNSPEC,
+ NL80211_IFACE_COMB_LIMITS,
+ NL80211_IFACE_COMB_MAXNUM,
+ NL80211_IFACE_COMB_STA_AP_BI_MATCH,
+ NL80211_IFACE_COMB_NUM_CHANNELS,
+
+ /* keep last */
+ NUM_NL80211_IFACE_COMB,
+ MAX_NL80211_IFACE_COMB = NUM_NL80211_IFACE_COMB - 1
+};
+
+
+/**
+ * enum nl80211_plink_state - state of a mesh peer link finite state machine
+ *
+ * @NL80211_PLINK_LISTEN: initial state, considered the implicit
+ * state of non existant mesh peer links
+ * @NL80211_PLINK_OPN_SNT: mesh plink open frame has been sent to
+ * this mesh peer
+ * @NL80211_PLINK_OPN_RCVD: mesh plink open frame has been received
+ * from this mesh peer
+ * @NL80211_PLINK_CNF_RCVD: mesh plink confirm frame has been
+ * received from this mesh peer
+ * @NL80211_PLINK_ESTAB: mesh peer link is established
+ * @NL80211_PLINK_HOLDING: mesh peer link is being closed or cancelled
+ * @NL80211_PLINK_BLOCKED: all frames transmitted from this mesh
+ * plink are discarded
+ * @NUM_NL80211_PLINK_STATES: number of peer link states
+ * @MAX_NL80211_PLINK_STATES: highest numerical value of plink states
+ */
+enum nl80211_plink_state {
+ NL80211_PLINK_LISTEN,
+ NL80211_PLINK_OPN_SNT,
+ NL80211_PLINK_OPN_RCVD,
+ NL80211_PLINK_CNF_RCVD,
+ NL80211_PLINK_ESTAB,
+ NL80211_PLINK_HOLDING,
+ NL80211_PLINK_BLOCKED,
+
+ /* keep last */
+ NUM_NL80211_PLINK_STATES,
+ MAX_NL80211_PLINK_STATES = NUM_NL80211_PLINK_STATES - 1
+};
+
+#define NL80211_KCK_LEN 16
+#define NL80211_KEK_LEN 16
+#define NL80211_REPLAY_CTR_LEN 8
+
+/**
+ * enum nl80211_rekey_data - attributes for GTK rekey offload
+ * @__NL80211_REKEY_DATA_INVALID: invalid number for nested attributes
+ * @NL80211_REKEY_DATA_KEK: key encryption key (binary)
+ * @NL80211_REKEY_DATA_KCK: key confirmation key (binary)
+ * @NL80211_REKEY_DATA_REPLAY_CTR: replay counter (binary)
+ * @NUM_NL80211_REKEY_DATA: number of rekey attributes (internal)
+ * @MAX_NL80211_REKEY_DATA: highest rekey attribute (internal)
+ */
+enum nl80211_rekey_data {
+ __NL80211_REKEY_DATA_INVALID,
+ NL80211_REKEY_DATA_KEK,
+ NL80211_REKEY_DATA_KCK,
+ NL80211_REKEY_DATA_REPLAY_CTR,
+
+ /* keep last */
+ NUM_NL80211_REKEY_DATA,
+ MAX_NL80211_REKEY_DATA = NUM_NL80211_REKEY_DATA - 1
+};
+
+/**
+ * enum nl80211_hidden_ssid - values for %NL80211_ATTR_HIDDEN_SSID
+ * @NL80211_HIDDEN_SSID_NOT_IN_USE: do not hide SSID (i.e., broadcast it in
+ * Beacon frames)
+ * @NL80211_HIDDEN_SSID_ZERO_LEN: hide SSID by using zero-length SSID element
+ * in Beacon frames
+ * @NL80211_HIDDEN_SSID_ZERO_CONTENTS: hide SSID by using correct length of SSID
+ * element in Beacon frames but zero out each byte in the SSID
+ */
+enum nl80211_hidden_ssid {
+ NL80211_HIDDEN_SSID_NOT_IN_USE,
+ NL80211_HIDDEN_SSID_ZERO_LEN,
+ NL80211_HIDDEN_SSID_ZERO_CONTENTS
+};
+
+/**
+ * enum nl80211_sta_wme_attr - station WME attributes
+ * @__NL80211_STA_WME_INVALID: invalid number for nested attribute
+ * @NL80211_STA_WME_UAPSD_QUEUES: bitmap of uapsd queues. the format
+ * is the same as the AC bitmap in the QoS info field.
+ * @NL80211_STA_WME_MAX_SP: max service period. the format is the same
+ * as the MAX_SP field in the QoS info field (but already shifted down).
+ * @__NL80211_STA_WME_AFTER_LAST: internal
+ * @NL80211_STA_WME_MAX: highest station WME attribute
+ */
+enum nl80211_sta_wme_attr {
+ __NL80211_STA_WME_INVALID,
+ NL80211_STA_WME_UAPSD_QUEUES,
+ NL80211_STA_WME_MAX_SP,
+
+ /* keep last */
+ __NL80211_STA_WME_AFTER_LAST,
+ NL80211_STA_WME_MAX = __NL80211_STA_WME_AFTER_LAST - 1
+};
+
+/**
+ * enum nl80211_pmksa_candidate_attr - attributes for PMKSA caching candidates
+ * @__NL80211_PMKSA_CANDIDATE_INVALID: invalid number for nested attributes
+ * @NL80211_PMKSA_CANDIDATE_INDEX: candidate index (u32; the smaller, the higher
+ * priority)
+ * @NL80211_PMKSA_CANDIDATE_BSSID: candidate BSSID (6 octets)
+ * @NL80211_PMKSA_CANDIDATE_PREAUTH: RSN pre-authentication supported (flag)
+ * @NUM_NL80211_PMKSA_CANDIDATE: number of PMKSA caching candidate attributes
+ * (internal)
+ * @MAX_NL80211_PMKSA_CANDIDATE: highest PMKSA caching candidate attribute
+ * (internal)
+ */
+enum nl80211_pmksa_candidate_attr {
+ __NL80211_PMKSA_CANDIDATE_INVALID,
+ NL80211_PMKSA_CANDIDATE_INDEX,
+ NL80211_PMKSA_CANDIDATE_BSSID,
+ NL80211_PMKSA_CANDIDATE_PREAUTH,
+
+ /* keep last */
+ NUM_NL80211_PMKSA_CANDIDATE,
+ MAX_NL80211_PMKSA_CANDIDATE = NUM_NL80211_PMKSA_CANDIDATE - 1
+};
+
+/**
+ * enum nl80211_tdls_operation - values for %NL80211_ATTR_TDLS_OPERATION
+ * @NL80211_TDLS_DISCOVERY_REQ: Send a TDLS discovery request
+ * @NL80211_TDLS_SETUP: Setup TDLS link
+ * @NL80211_TDLS_TEARDOWN: Teardown a TDLS link which is already established
+ * @NL80211_TDLS_ENABLE_LINK: Enable TDLS link
+ * @NL80211_TDLS_DISABLE_LINK: Disable TDLS link
+ */
+enum nl80211_tdls_operation {
+ NL80211_TDLS_DISCOVERY_REQ,
+ NL80211_TDLS_SETUP,
+ NL80211_TDLS_TEARDOWN,
+ NL80211_TDLS_ENABLE_LINK,
+ NL80211_TDLS_DISABLE_LINK,
+};
+
+/*
+ * enum nl80211_ap_sme_features - device-integrated AP features
+ * Reserved for future use, no bits are defined in
+ * NL80211_ATTR_DEVICE_AP_SME yet.
+enum nl80211_ap_sme_features {
+};
+ */
+
+/**
+ * enum nl80211_feature_flags - device/driver features
+ * @NL80211_FEATURE_SK_TX_STATUS: This driver supports reflecting back
+ * TX status to the socket error queue when requested with the
+ * socket option.
+ * @NL80211_FEATURE_HT_IBSS: This driver supports IBSS with HT datarates.
+ */
+enum nl80211_feature_flags {
+ NL80211_FEATURE_SK_TX_STATUS = 1 << 0,
+ NL80211_FEATURE_HT_IBSS = 1 << 1,
+};
+
+/**
+ * enum nl80211_probe_resp_offload_support_attr - optional supported
+ * protocols for probe-response offloading by the driver/FW.
+ * To be used with the %NL80211_ATTR_PROBE_RESP_OFFLOAD attribute.
+ * Each enum value represents a bit in the bitmap of supported
+ * protocols. Typically a subset of probe-requests belonging to a
+ * supported protocol will be excluded from offload and uploaded
+ * to the host.
+ *
+ * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS: Support for WPS ver. 1
+ * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS2: Support for WPS ver. 2
+ * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_P2P: Support for P2P
+ * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_80211U: Support for 802.11u
+ */
+enum nl80211_probe_resp_offload_support_attr {
+ NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS = 1<<0,
+ NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS2 = 1<<1,
+ NL80211_PROBE_RESP_OFFLOAD_SUPPORT_P2P = 1<<2,
+ NL80211_PROBE_RESP_OFFLOAD_SUPPORT_80211U = 1<<3,
+};
+
#endif /* __LINUX_NL80211_H */
diff --git a/package/iwinfo/src/iwinfo_cli.c b/package/iwinfo/src/iwinfo_cli.c
index d60d7b8d9..dc8ed8b14 100644
--- a/package/iwinfo/src/iwinfo_cli.c
+++ b/package/iwinfo/src/iwinfo_cli.c
@@ -275,6 +275,34 @@ static char * format_hwmodes(int modes)
return buf;
}
+static char * format_assocrate(struct iwinfo_rate_entry *r)
+{
+ static char buf[40];
+ char *p = buf;
+ int l = sizeof(buf);
+
+ if (r->rate <= 0)
+ {
+ snprintf(buf, sizeof(buf), "unknown");
+ }
+ else
+ {
+ p += snprintf(p, l, "%s", format_rate(r->rate));
+ l = sizeof(buf) - (p - buf);
+
+ if (r->mcs >= 0)
+ {
+ p += snprintf(p, l, ", MCS %d, %dMHz", r->mcs, 20 + r->is_40mhz*20);
+ l = sizeof(buf) - (p - buf);
+
+ if (r->is_short_gi)
+ p += snprintf(p, l, ", short GI");
+ }
+ }
+
+ return buf;
+}
+
static const char * print_type(const struct iwinfo_ops *iw, const char *ifname)
{
@@ -635,11 +663,22 @@ static void print_assoclist(const struct iwinfo_ops *iw, const char *ifname)
{
e = (struct iwinfo_assoclist_entry *) &buf[i];
- printf("%s %s / %s (SNR %d)\n",
+ printf("%s %s / %s (SNR %d) %d ms ago\n",
format_bssid(e->mac),
format_signal(e->signal),
format_noise(e->noise),
- (e->signal - e->noise));
+ (e->signal - e->noise),
+ e->inactive);
+
+ printf(" RX: %-38s %8d Pkts.\n",
+ format_assocrate(&e->rx_rate),
+ e->rx_packets
+ );
+
+ printf(" TX: %-38s %8d Pkts.\n\n",
+ format_assocrate(&e->tx_rate),
+ e->tx_packets
+ );
}
}
diff --git a/package/iwinfo/src/iwinfo_lua.c b/package/iwinfo/src/iwinfo_lua.c
index 533236b4d..6b78cb763 100644
--- a/package/iwinfo/src/iwinfo_lua.c
+++ b/package/iwinfo/src/iwinfo_lua.c
@@ -265,6 +265,45 @@ static int iwinfo_L_assoclist(lua_State *L, int (*func)(const char *, char *, in
lua_pushnumber(L, e->noise);
lua_setfield(L, -2, "noise");
+ lua_pushnumber(L, e->inactive);
+ lua_setfield(L, -2, "inactive");
+
+ lua_pushnumber(L, e->rx_packets);
+ lua_setfield(L, -2, "rx_packets");
+
+ lua_pushnumber(L, e->tx_packets);
+ lua_setfield(L, -2, "tx_packets");
+
+ lua_pushnumber(L, e->rx_rate.rate);
+ lua_setfield(L, -2, "rx_rate");
+
+ lua_pushnumber(L, e->tx_rate.rate);
+ lua_setfield(L, -2, "tx_rate");
+
+ if (e->rx_rate.mcs >= 0)
+ {
+ lua_pushnumber(L, e->rx_rate.mcs);
+ lua_setfield(L, -2, "rx_mcs");
+
+ lua_pushboolean(L, e->rx_rate.is_40mhz);
+ lua_setfield(L, -2, "rx_40mhz");
+
+ lua_pushboolean(L, e->rx_rate.is_short_gi);
+ lua_setfield(L, -2, "rx_short_gi");
+ }
+
+ if (e->tx_rate.mcs >= 0)
+ {
+ lua_pushnumber(L, e->tx_rate.mcs);
+ lua_setfield(L, -2, "tx_mcs");
+
+ lua_pushboolean(L, e->tx_rate.is_40mhz);
+ lua_setfield(L, -2, "tx_40mhz");
+
+ lua_pushboolean(L, e->tx_rate.is_short_gi);
+ lua_setfield(L, -2, "tx_short_gi");
+ }
+
lua_setfield(L, -2, macstr);
}
}
diff --git a/package/iwinfo/src/iwinfo_madwifi.c b/package/iwinfo/src/iwinfo_madwifi.c
index fcd6c8c98..043cf53e8 100644
--- a/package/iwinfo/src/iwinfo_madwifi.c
+++ b/package/iwinfo/src/iwinfo_madwifi.c
@@ -726,9 +726,29 @@ int madwifi_get_assoclist(const char *ifname, char *buf, int *len)
do {
si = (struct ieee80211req_sta_info *) cp;
+ memset(&entry, 0, sizeof(entry));
+
entry.signal = (si->isi_rssi - 95);
entry.noise = noise;
memcpy(entry.mac, &si->isi_macaddr, 6);
+
+ entry.inactive = si->isi_inact * 1000;
+
+ entry.tx_packets = (si->isi_txseqs[0] & IEEE80211_SEQ_SEQ_MASK)
+ >> IEEE80211_SEQ_SEQ_SHIFT;
+
+ entry.rx_packets = (si->isi_rxseqs[0] & IEEE80211_SEQ_SEQ_MASK)
+ >> IEEE80211_SEQ_SEQ_SHIFT;
+
+ entry.tx_rate.rate =
+ (si->isi_rates[si->isi_txrate] & IEEE80211_RATE_VAL) * 500;
+
+ /* XXX: this is just a guess */
+ entry.rx_rate.rate = entry.tx_rate.rate;
+
+ entry.rx_rate.mcs = -1;
+ entry.tx_rate.mcs = -1;
+
memcpy(&buf[bl], &entry, sizeof(struct iwinfo_assoclist_entry));
bl += sizeof(struct iwinfo_assoclist_entry);
diff --git a/package/iwinfo/src/iwinfo_nl80211.c b/package/iwinfo/src/iwinfo_nl80211.c
index 5c6f7a8ef..05d820349 100644
--- a/package/iwinfo/src/iwinfo_nl80211.c
+++ b/package/iwinfo/src/iwinfo_nl80211.c
@@ -1052,33 +1052,81 @@ static int nl80211_get_assoclist_cb(struct nl_msg *msg, void *arg)
struct iwinfo_assoclist_entry *e = arr->buf;
struct nlattr **attr = nl80211_parse(msg);
struct nlattr *sinfo[NL80211_STA_INFO_MAX + 1];
+ struct nlattr *rinfo[NL80211_RATE_INFO_MAX + 1];
static struct nla_policy stats_policy[NL80211_STA_INFO_MAX + 1] = {
[NL80211_STA_INFO_INACTIVE_TIME] = { .type = NLA_U32 },
- [NL80211_STA_INFO_RX_BYTES] = { .type = NLA_U32 },
- [NL80211_STA_INFO_TX_BYTES] = { .type = NLA_U32 },
[NL80211_STA_INFO_RX_PACKETS] = { .type = NLA_U32 },
[NL80211_STA_INFO_TX_PACKETS] = { .type = NLA_U32 },
- [NL80211_STA_INFO_SIGNAL] = { .type = NLA_U8 },
+ [NL80211_STA_INFO_RX_BITRATE] = { .type = NLA_NESTED },
[NL80211_STA_INFO_TX_BITRATE] = { .type = NLA_NESTED },
- [NL80211_STA_INFO_LLID] = { .type = NLA_U16 },
- [NL80211_STA_INFO_PLID] = { .type = NLA_U16 },
- [NL80211_STA_INFO_PLINK_STATE] = { .type = NLA_U8 },
+ [NL80211_STA_INFO_SIGNAL] = { .type = NLA_U8 },
+ };
+
+ static struct nla_policy rate_policy[NL80211_RATE_INFO_MAX + 1] = {
+ [NL80211_RATE_INFO_BITRATE] = { .type = NLA_U16 },
+ [NL80211_RATE_INFO_MCS] = { .type = NLA_U8 },
+ [NL80211_RATE_INFO_40_MHZ_WIDTH] = { .type = NLA_FLAG },
+ [NL80211_RATE_INFO_SHORT_GI] = { .type = NLA_FLAG },
};
/* advance to end of array */
e += arr->count;
+ memset(e, 0, sizeof(*e));
if (attr[NL80211_ATTR_MAC])
memcpy(e->mac, nla_data(attr[NL80211_ATTR_MAC]), 6);
- if (attr[NL80211_ATTR_STA_INFO])
+ if (attr[NL80211_ATTR_STA_INFO] &&
+ !nla_parse_nested(sinfo, NL80211_STA_INFO_MAX,
+ attr[NL80211_ATTR_STA_INFO], stats_policy))
{
- if (!nla_parse_nested(sinfo, NL80211_STA_INFO_MAX,
- attr[NL80211_ATTR_STA_INFO], stats_policy))
+ if (sinfo[NL80211_STA_INFO_SIGNAL])
+ e->signal = nla_get_u8(sinfo[NL80211_STA_INFO_SIGNAL]);
+
+ if (sinfo[NL80211_STA_INFO_INACTIVE_TIME])
+ e->inactive = nla_get_u32(sinfo[NL80211_STA_INFO_INACTIVE_TIME]);
+
+ if (sinfo[NL80211_STA_INFO_RX_PACKETS])
+ e->rx_packets = nla_get_u32(sinfo[NL80211_STA_INFO_RX_PACKETS]);
+
+ if (sinfo[NL80211_STA_INFO_TX_PACKETS])
+ e->tx_packets = nla_get_u32(sinfo[NL80211_STA_INFO_TX_PACKETS]);
+
+ if (sinfo[NL80211_STA_INFO_RX_BITRATE] &&
+ !nla_parse_nested(rinfo, NL80211_RATE_INFO_MAX,
+ sinfo[NL80211_STA_INFO_RX_BITRATE], rate_policy))
{
- if (sinfo[NL80211_STA_INFO_SIGNAL])
- e->signal = nla_get_u8(sinfo[NL80211_STA_INFO_SIGNAL]);
+ if (rinfo[NL80211_RATE_INFO_BITRATE])
+ e->rx_rate.rate =
+ nla_get_u16(rinfo[NL80211_RATE_INFO_BITRATE]) * 100;
+
+ if (rinfo[NL80211_RATE_INFO_MCS])
+ e->rx_rate.mcs = nla_get_u8(rinfo[NL80211_RATE_INFO_MCS]);
+
+ if (rinfo[NL80211_RATE_INFO_40_MHZ_WIDTH])
+ e->rx_rate.is_40mhz = 1;
+
+ if (rinfo[NL80211_RATE_INFO_SHORT_GI])
+ e->rx_rate.is_short_gi = 1;
+ }
+
+ if (sinfo[NL80211_STA_INFO_TX_BITRATE] &&
+ !nla_parse_nested(rinfo, NL80211_RATE_INFO_MAX,
+ sinfo[NL80211_STA_INFO_TX_BITRATE], rate_policy))
+ {
+ if (rinfo[NL80211_RATE_INFO_BITRATE])
+ e->tx_rate.rate =
+ nla_get_u16(rinfo[NL80211_RATE_INFO_BITRATE]) * 100;
+
+ if (rinfo[NL80211_RATE_INFO_MCS])
+ e->tx_rate.mcs = nla_get_u8(rinfo[NL80211_RATE_INFO_MCS]);
+
+ if (rinfo[NL80211_RATE_INFO_40_MHZ_WIDTH])
+ e->tx_rate.is_40mhz = 1;
+
+ if (rinfo[NL80211_RATE_INFO_SHORT_GI])
+ e->tx_rate.is_short_gi = 1;
}
}
@@ -1113,8 +1161,6 @@ int nl80211_get_assoclist(const char *ifname, char *buf, int *len)
nl80211_send(req, nl80211_get_assoclist_cb, &arr);
nl80211_free(req);
}
-
- break;
}
}
diff --git a/package/iwinfo/src/iwinfo_wl.c b/package/iwinfo/src/iwinfo_wl.c
index 7b39a9b86..16202f629 100644
--- a/package/iwinfo/src/iwinfo_wl.c
+++ b/package/iwinfo/src/iwinfo_wl.c
@@ -37,17 +37,30 @@ static int wl_ioctl(const char *name, int cmd, void *buf, int len)
return iwinfo_ioctl(SIOCDEVPRIVATE, &ifr);
}
+static int wl_iovar(const char *name, const char *cmd, const char *arg,
+ int arglen, void *buf, int buflen)
+{
+ int cmdlen = strlen(cmd) + 1;
+
+ memcpy(buf, cmd, cmdlen);
+
+ if (arg && arglen > 0)
+ memcpy(buf + cmdlen, arg, arglen);
+
+ return wl_ioctl(name, WLC_GET_VAR, buf, buflen);
+}
+
static struct wl_maclist * wl_read_assoclist(const char *ifname)
{
struct wl_maclist *macs;
int maclen = 4 + WL_MAX_STA_COUNT * 6;
- if( (macs = (struct wl_maclist *) malloc(maclen)) != NULL )
+ if ((macs = (struct wl_maclist *) malloc(maclen)) != NULL)
{
memset(macs, 0, maclen);
macs->count = WL_MAX_STA_COUNT;
- if( !wl_ioctl(ifname, WLC_GET_ASSOCLIST, macs, maclen) )
+ if (!wl_ioctl(ifname, WLC_GET_ASSOCLIST, macs, maclen))
return macs;
free(macs);
@@ -60,11 +73,8 @@ static struct wl_maclist * wl_read_assoclist(const char *ifname)
int wl_probe(const char *ifname)
{
int magic;
-
- if( !wl_ioctl(ifname, WLC_GET_MAGIC, &magic, sizeof(magic)) && (magic == WLC_IOCTL_MAGIC))
- return 1;
-
- return 0;
+ return (!wl_ioctl(ifname, WLC_GET_MAGIC, &magic, sizeof(magic)) &&
+ (magic == WLC_IOCTL_MAGIC));
}
void wl_close(void)
@@ -77,20 +87,20 @@ int wl_get_mode(const char *ifname, char *buf)
int ret = -1;
int ap, infra, passive;
- if( (ret = wl_ioctl(ifname, WLC_GET_AP, &ap, sizeof(ap))) )
+ if ((ret = wl_ioctl(ifname, WLC_GET_AP, &ap, sizeof(ap))))
return ret;
- if( (ret = wl_ioctl(ifname, WLC_GET_INFRA, &infra, sizeof(infra))) )
+ if ((ret = wl_ioctl(ifname, WLC_GET_INFRA, &infra, sizeof(infra))))
return ret;
- if( (ret = wl_ioctl(ifname, WLC_GET_PASSIVE, &passive, sizeof(passive))) )
+ if ((ret = wl_ioctl(ifname, WLC_GET_PASSIVE, &passive, sizeof(passive))))
return ret;
- if( passive )
+ if (passive)
sprintf(buf, "Monitor");
- else if( !infra )
+ else if (!infra)
sprintf(buf, "Ad-Hoc");
- else if( ap )
+ else if (ap)
sprintf(buf, "Master");
else
sprintf(buf, "Client");
@@ -103,7 +113,7 @@ int wl_get_ssid(const char *ifname, char *buf)
int ret = -1;
wlc_ssid_t ssid;
- if( !(ret = wl_ioctl(ifname, WLC_GET_SSID, &ssid, sizeof(ssid))) )
+ if (!(ret = wl_ioctl(ifname, WLC_GET_SSID, &ssid, sizeof(ssid))))
memcpy(buf, ssid.ssid, ssid.ssid_len);
return ret;
@@ -114,7 +124,7 @@ int wl_get_bssid(const char *ifname, char *buf)
int ret = -1;
char bssid[6];
- if( !(ret = wl_ioctl(ifname, WLC_GET_BSSID, bssid, 6)) )
+ if (!(ret = wl_ioctl(ifname, WLC_GET_BSSID, bssid, 6)))
sprintf(buf, "%02X:%02X:%02X:%02X:%02X:%02X",
(uint8_t)bssid[0], (uint8_t)bssid[1], (uint8_t)bssid[2],
(uint8_t)bssid[3], (uint8_t)bssid[4], (uint8_t)bssid[5]
@@ -163,7 +173,7 @@ int wl_get_signal(const char *ifname, int *buf)
wl_ioctl(ifname, WLC_GET_BSS_INFO, tmp, WLC_IOCTL_MAXLEN);
- if( !wl_ioctl(ifname, WLC_GET_AP, &ap, sizeof(ap)) && !ap )
+ if (!wl_ioctl(ifname, WLC_GET_AP, &ap, sizeof(ap)) && !ap)
{
*buf = tmp[WL_BSS_RSSI_OFFSET];
}
@@ -172,13 +182,13 @@ int wl_get_signal(const char *ifname, int *buf)
rssi = rssi_count = 0;
/* Calculate average rssi from conntected stations */
- if( (macs = wl_read_assoclist(ifname)) != NULL )
+ if ((macs = wl_read_assoclist(ifname)) != NULL)
{
- for( i = 0; i < macs->count; i++ )
+ for (i = 0; i < macs->count; i++)
{
memcpy(starssi.mac, &macs->ea[i], 6);
- if( !wl_ioctl(ifname, WLC_GET_RSSI, &starssi, 12) )
+ if (!wl_ioctl(ifname, WLC_GET_RSSI, &starssi, 12))
{
rssi -= starssi.rssi;
rssi_count++;
@@ -259,10 +269,10 @@ int wl_get_encryption(const char *ifname, char *buf)
switch(wpa)
{
case 0:
- if( wsec && !wauth )
+ if (wsec && !wauth)
c->auth_algs |= IWINFO_AUTH_OPEN;
- else if( wsec && wauth )
+ else if (wsec && wauth)
c->auth_algs |= IWINFO_AUTH_SHARED;
/* ToDo: evaluate WEP key lengths */
@@ -376,6 +386,26 @@ int wl_get_enctype(const char *ifname, char *buf)
return 0;
}
+static void wl_get_assoclist_cb(const char *ifname,
+ struct iwinfo_assoclist_entry *e)
+{
+ wl_sta_info_t sta = { 0 };
+
+ if (!wl_iovar(ifname, "sta_info", e->mac, 6, &sta, sizeof(sta)) &&
+ (sta.ver >= 2))
+ {
+ e->inactive = sta.idle * 1000;
+ e->rx_packets = sta.rx_ucast_pkts;
+ e->tx_packets = sta.tx_pkts;
+ e->rx_rate.rate = sta.rx_rate;
+ e->tx_rate.rate = sta.tx_rate;
+
+ /* ToDo: 11n */
+ e.rx_rate.mcs = -1;
+ e.tx_rate.mcs = -1;
+ }
+}
+
int wl_get_assoclist(const char *ifname, char *buf, int *len)
{
int i, j, noise;
@@ -394,22 +424,25 @@ int wl_get_assoclist(const char *ifname, char *buf, int *len)
wl_ioctl(ifname, WLC_GET_INFRA, &infra, sizeof(infra));
wl_ioctl(ifname, WLC_GET_PASSIVE, &passive, sizeof(passive));
- if( wl_get_noise(ifname, &noise) )
+ if (wl_get_noise(ifname, &noise))
noise = 0;
- if( (ap || infra || passive) && ((macs = wl_read_assoclist(ifname)) != NULL) )
+ if ((ap || infra || passive) && ((macs = wl_read_assoclist(ifname)) != NULL))
{
- for( i = 0, j = 0; i < macs->count; i++, j += sizeof(struct iwinfo_assoclist_entry) )
+ for (i = 0, j = 0; i < macs->count; i++, j += sizeof(struct iwinfo_assoclist_entry))
{
+ memset(&entry, 0, sizeof(entry));
memcpy(rssi.mac, &macs->ea[i], 6);
- if( !wl_ioctl(ifname, WLC_GET_RSSI, &rssi, sizeof(struct wl_sta_rssi)) )
+ if (!wl_ioctl(ifname, WLC_GET_RSSI, &rssi, sizeof(struct wl_sta_rssi)))
entry.signal = (rssi.rssi - 0x100);
else
entry.signal = 0;
entry.noise = noise;
memcpy(entry.mac, &macs->ea[i], 6);
+ wl_get_assoclist_cb(ifname, &entry);
+
memcpy(&buf[j], &entry, sizeof(entry));
}
@@ -417,13 +450,13 @@ int wl_get_assoclist(const char *ifname, char *buf, int *len)
free(macs);
return 0;
}
- else if( (arp = fopen("/proc/net/arp", "r")) != NULL )
+ else if ((arp = fopen("/proc/net/arp", "r")) != NULL)
{
j = 0;
- while( fgets(line, sizeof(line), arp) != NULL )
+ while (fgets(line, sizeof(line), arp) != NULL)
{
- if( sscanf(line, "%*s 0x%*d 0x%*d %17s %*s %s", macstr, devstr) && !strcmp(devstr, ifname) )
+ if (sscanf(line, "%*s 0x%*d 0x%*d %17s %*s %s", macstr, devstr) && !strcmp(devstr, ifname))
{
rssi.mac[0] = strtol(&macstr[0], NULL, 16);
rssi.mac[1] = strtol(&macstr[3], NULL, 16);
@@ -432,7 +465,7 @@ int wl_get_assoclist(const char *ifname, char *buf, int *len)
rssi.mac[4] = strtol(&macstr[12], NULL, 16);
rssi.mac[5] = strtol(&macstr[15], NULL, 16);
- if( !wl_ioctl(ifname, WLC_GET_RSSI, &rssi, sizeof(struct wl_sta_rssi)) )
+ if (!wl_ioctl(ifname, WLC_GET_RSSI, &rssi, sizeof(struct wl_sta_rssi)))
entry.signal = (rssi.rssi - 0x100);
else
entry.signal = 0;
@@ -460,7 +493,7 @@ int wl_get_txpwrlist(const char *ifname, char *buf, int *len)
uint8_t mw[8] = { 1, 3, 6, 10, 15, 25, 39, 63 };
int i;
- for( i = 0; i < 8; i++ )
+ for (i = 0; i < 8; i++)
{
entry.dbm = dbm[i];
entry.mw = mw[i];
@@ -485,14 +518,14 @@ int wl_get_country(const char *ifname, char *buf)
{
char ccode[WLC_CNTRY_BUF_SZ];
- if( !wl_ioctl(ifname, WLC_GET_COUNTRY, ccode, WLC_CNTRY_BUF_SZ) )
+ if (!wl_ioctl(ifname, WLC_GET_COUNTRY, ccode, WLC_CNTRY_BUF_SZ))
{
/* IL0 -> World */
- if( !strcmp(ccode, "IL0") )
+ if (!strcmp(ccode, "IL0"))
sprintf(buf, "00");
/* YU -> RS */
- else if( !strcmp(ccode, "YU") )
+ else if (!strcmp(ccode, "YU"))
sprintf(buf, "RS");
else
@@ -513,19 +546,19 @@ int wl_get_countrylist(const char *ifname, char *buf, int *len)
cl->buflen = sizeof(cdata);
- if( !wl_ioctl(ifname, WLC_GET_COUNTRY_LIST, cl, cl->buflen) )
+ if (!wl_ioctl(ifname, WLC_GET_COUNTRY_LIST, cl, cl->buflen))
{
- for( i = 0, count = 0; i < cl->count; i++, c++ )
+ for (i = 0, count = 0; i < cl->count; i++, c++)
{
sprintf(c->ccode, &cl->country_abbrev[i * WLC_CNTRY_BUF_SZ]);
c->iso3166 = c->ccode[0] * 256 + c->ccode[1];
/* IL0 -> World */
- if( !strcmp(c->ccode, "IL0") )
+ if (!strcmp(c->ccode, "IL0"))
c->iso3166 = 0x3030;
/* YU -> RS */
- else if( !strcmp(c->ccode, "YU") )
+ else if (!strcmp(c->ccode, "YU"))
c->iso3166 = 0x5253;
}
@@ -546,9 +579,9 @@ int wl_get_mbssid_support(const char *ifname, int *buf)
wlc_rev_info_t revinfo;
/* Multi bssid support only works on corerev >= 9 */
- if( !wl_ioctl(ifname, WLC_GET_REVINFO, &revinfo, sizeof(revinfo)) )
+ if (!wl_ioctl(ifname, WLC_GET_REVINFO, &revinfo, sizeof(revinfo)))
{
- if( revinfo.corerev >= 9 )
+ if (revinfo.corerev >= 9)
{
*buf = 1;
return 0;