summaryrefslogtreecommitdiffstats
path: root/target
diff options
context:
space:
mode:
authoracoul <acoul@3c298f89-4303-0410-b956-a3cf2f4a3e73>2010-04-28 14:09:43 +0000
committeracoul <acoul@3c298f89-4303-0410-b956-a3cf2f4a3e73>2010-04-28 14:09:43 +0000
commit27a5eb2de740ac23e85e9bc7405aac9d844a28f7 (patch)
tree53ed40266041ecbca861bfc634a2defff060a1c4 /target
parent505801ef4492bb821490bacaffe70d170b9e9edd (diff)
[atheros] add kernel 2.6.34 support, refresh patches
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21235 3c298f89-4303-0410-b956-a3cf2f4a3e73
Diffstat (limited to 'target')
-rw-r--r--target/linux/atheros/config-2.6.327
-rw-r--r--target/linux/atheros/config-2.6.334
-rw-r--r--target/linux/atheros/config-2.6.34211
-rw-r--r--target/linux/atheros/patches-2.6.32/200-ar2313_enable_mvswitch.patch2
-rw-r--r--target/linux/atheros/patches-2.6.33/200-ar2313_enable_mvswitch.patch2
-rw-r--r--target/linux/atheros/patches-2.6.34/001-get_c0_compare_int_fix.patch39
-rw-r--r--target/linux/atheros/patches-2.6.34/100-board.patch3126
-rw-r--r--target/linux/atheros/patches-2.6.34/101-early-printk-support.patch68
-rw-r--r--target/linux/atheros/patches-2.6.34/105-ar2315_pci.patch297
-rw-r--r--target/linux/atheros/patches-2.6.34/110-ar2313_ethernet.patch1596
-rw-r--r--target/linux/atheros/patches-2.6.34/120-spiflash.patch659
-rw-r--r--target/linux/atheros/patches-2.6.34/130-watchdog.patch228
-rw-r--r--target/linux/atheros/patches-2.6.34/140-redboot_partition_scan.patch54
-rw-r--r--target/linux/atheros/patches-2.6.34/141-redboot_various_erase_size_fix.patch72
-rw-r--r--target/linux/atheros/patches-2.6.34/200-ar2313_enable_mvswitch.patch70
-rw-r--r--target/linux/atheros/patches-2.6.34/210-reset_button.patch174
-rw-r--r--target/linux/atheros/patches-2.6.34/220-enet_micrel_workaround.patch69
17 files changed, 6674 insertions, 4 deletions
diff --git a/target/linux/atheros/config-2.6.32 b/target/linux/atheros/config-2.6.32
index 9ccb44977..4d1afa466 100644
--- a/target/linux/atheros/config-2.6.32
+++ b/target/linux/atheros/config-2.6.32
@@ -20,8 +20,10 @@ CONFIG_ATHEROS_WDT=y
# CONFIG_BCM47XX is not set
# CONFIG_BCM63XX is not set
CONFIG_BITREVERSE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_CEVT_R4K=y
CONFIG_CEVT_R4K_LIB=y
CONFIG_CFG80211_DEFAULT_PS_VALUE=0
@@ -73,6 +75,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GPIO_DEVICE=y
+# CONFIG_HAMRADIO is not set
CONFIG_HARDWARE_WATCHPOINTS=y
CONFIG_HAS_DMA=y
CONFIG_HAS_IOMEM=y
@@ -83,6 +86,7 @@ CONFIG_HAVE_IDE=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HW_HAS_PCI=y
CONFIG_HW_RANDOM=y
+CONFIG_IMAGE_CMDLINE_HACK=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_IP175C_PHY=y
CONFIG_IRQ_CPU=y
@@ -119,13 +123,13 @@ CONFIG_MVSWITCH_PHY=y
# CONFIG_NXP_STB225 is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_PCI=y
+CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
CONFIG_PCI_DOMAINS=y
CONFIG_PHYLIB=y
# CONFIG_PMC_MSP is not set
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_PNX8550_JBS is not set
# CONFIG_PNX8550_STB810 is not set
-# CONFIG_PROBE_INITRD_HEADER is not set
CONFIG_SCHED_OMIT_FRAME_POINTER=y
# CONFIG_SCSI_DMA is not set
# CONFIG_SERIAL_8250_EXTENDED is not set
@@ -143,6 +147,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=1
# CONFIG_SIBYTE_RHONE is not set
# CONFIG_SIBYTE_SENTOSA is not set
# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SWAP is not set
CONFIG_SWCONFIG=y
CONFIG_SYS_HAS_CPU_MIPS32_R1=y
CONFIG_SYS_HAS_EARLY_PRINTK=y
diff --git a/target/linux/atheros/config-2.6.33 b/target/linux/atheros/config-2.6.33
index 24ded4461..66a8b650d 100644
--- a/target/linux/atheros/config-2.6.33
+++ b/target/linux/atheros/config-2.6.33
@@ -21,7 +21,6 @@ CONFIG_ATHEROS_WDT=y
# CONFIG_BCM63XX is not set
CONFIG_BITREVERSE=y
# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_BUG is not set
# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
@@ -81,6 +80,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GPIO_DEVICE=y
+# CONFIG_HAMRADIO is not set
CONFIG_HARDWARE_WATCHPOINTS=y
CONFIG_HAS_DMA=y
CONFIG_HAS_IOMEM=y
@@ -130,6 +130,8 @@ CONFIG_IP175C_PHY=y
CONFIG_IRQ_CPU=y
# CONFIG_LEDS_GPIO is not set
CONFIG_LOONGSON_UART_BASE=y
+CONFIG_LZMA_COMPRESS=y
+CONFIG_LZMA_DECOMPRESS=y
# CONFIG_MACH_ALCHEMY is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set
diff --git a/target/linux/atheros/config-2.6.34 b/target/linux/atheros/config-2.6.34
new file mode 100644
index 000000000..1a1a56c06
--- /dev/null
+++ b/target/linux/atheros/config-2.6.34
@@ -0,0 +1,211 @@
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
+CONFIG_ADM6996_PHY=y
+# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
+CONFIG_AR231X_ETHERNET=y
+# CONFIG_AR7 is not set
+CONFIG_AR8216_PHY=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ATHEROS_AR2315=y
+CONFIG_ATHEROS_AR2315_PCI=y
+CONFIG_ATHEROS_AR231X=y
+CONFIG_ATHEROS_AR5312=y
+CONFIG_ATHEROS_WDT=y
+# CONFIG_BCM47XX is not set
+# CONFIG_BCM63XX is not set
+CONFIG_BITREVERSE=y
+# CONFIG_BRIDGE_IGMP_SNOOPING is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
+# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+# CONFIG_CEPH_FS is not set
+CONFIG_CEVT_R4K=y
+CONFIG_CEVT_R4K_LIB=y
+CONFIG_CMDLINE="console=ttyS0,9600 rootfstype=squashfs,jffs2"
+CONFIG_CMDLINE_BOOL=y
+# CONFIG_CMDLINE_OVERRIDE is not set
+CONFIG_CPU_BIG_ENDIAN=y
+# CONFIG_CPU_CAVIUM_OCTEON is not set
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_CPU_HAS_SYNC=y
+# CONFIG_CPU_LITTLE_ENDIAN is not set
+# CONFIG_CPU_LOONGSON2E is not set
+# CONFIG_CPU_LOONGSON2F is not set
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPS32_R1=y
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
+CONFIG_CPU_MIPSR1=y
+# CONFIG_CPU_NEVADA is not set
+# CONFIG_CPU_R10000 is not set
+# CONFIG_CPU_R3000 is not set
+# CONFIG_CPU_R4300 is not set
+# CONFIG_CPU_R4X00 is not set
+# CONFIG_CPU_R5000 is not set
+# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R5500 is not set
+# CONFIG_CPU_R6000 is not set
+# CONFIG_CPU_R8000 is not set
+# CONFIG_CPU_RM7000 is not set
+# CONFIG_CPU_RM9000 is not set
+# CONFIG_CPU_SB1 is not set
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+# CONFIG_CPU_TX39XX is not set
+# CONFIG_CPU_TX49XX is not set
+# CONFIG_CPU_VR41XX is not set
+# CONFIG_CRYSTALHD is not set
+CONFIG_CSRC_R4K=y
+CONFIG_CSRC_R4K_LIB=y
+CONFIG_DECOMPRESS_LZMA=y
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEVPORT=y
+# CONFIG_DM9000 is not set
+CONFIG_DMA_NONCOHERENT=y
+# CONFIG_DT3155 is not set
+CONFIG_EARLY_PRINTK=y
+# CONFIG_FSNOTIFY is not set
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_GPIO_DEVICE=y
+# CONFIG_HAMRADIO is not set
+CONFIG_HARDWARE_WATCHPOINTS=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_HAVE_IDE=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HW_HAS_PCI=y
+CONFIG_HW_RANDOM=y
+CONFIG_IMAGE_CMDLINE_HACK=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+CONFIG_IP175C_PHY=y
+CONFIG_IRQ_CPU=y
+# CONFIG_LEDS_GPIO is not set
+# CONFIG_LOGFS is not set
+CONFIG_LOONGSON_UART_BASE=y
+# CONFIG_LPC_SCH is not set
+CONFIG_LZMA_COMPRESS=y
+CONFIG_LZMA_DECOMPRESS=y
+# CONFIG_MACH_ALCHEMY is not set
+# CONFIG_MACH_DECSTATION is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_MACH_LOONGSON is not set
+# CONFIG_MACH_TX39XX is not set
+# CONFIG_MACH_TX49XX is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_MIKROTIK_RB532 is not set
+CONFIG_MIPS=y
+# CONFIG_MIPS_COBALT is not set
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+# CONFIG_MIPS_MACHINE is not set
+# CONFIG_MIPS_MALTA is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_SIM is not set
+CONFIG_MTD_AR2315=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+# CONFIG_MTD_CFI_GEOMETRY is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_MYLOADER_PARTS=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-3
+CONFIG_MTD_REDBOOT_PARTS=y
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+CONFIG_MVSWITCH_PHY=y
+CONFIG_NEED_DMA_MAP_STATE=y
+# CONFIG_NET_PCI is not set
+# CONFIG_NO_IOPORT is not set
+# CONFIG_NXP_STB220 is not set
+# CONFIG_NXP_STB225 is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PHYLIB=y
+# CONFIG_PMC_MSP is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_PNX8550_JBS is not set
+# CONFIG_PNX8550_STB810 is not set
+# CONFIG_POWERTV is not set
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+# CONFIG_SCSI_DMA is not set
+CONFIG_SCSI_MOD=y
+# CONFIG_SERIAL_8250_EXTENDED is not set
+CONFIG_SERIAL_8250_NR_UARTS=1
+CONFIG_SERIAL_8250_RUNTIME_UARTS=1
+# CONFIG_SERIAL_TIMBERDALE is not set
+# CONFIG_SGI_IP22 is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SWAP is not set
+CONFIG_SWCONFIG=y
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
+CONFIG_TRAD_SIGNALS=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/atheros/patches-2.6.32/200-ar2313_enable_mvswitch.patch b/target/linux/atheros/patches-2.6.32/200-ar2313_enable_mvswitch.patch
index b97a62d81..60025e43e 100644
--- a/target/linux/atheros/patches-2.6.32/200-ar2313_enable_mvswitch.patch
+++ b/target/linux/atheros/patches-2.6.32/200-ar2313_enable_mvswitch.patch
@@ -48,7 +48,7 @@
/* reset descriptor's curr_addr */
rxdesc->addr = virt_to_phys(skb_new->data);
-@@ -1239,6 +1245,8 @@ static int ar231x_mdiobus_probe (struct
+@@ -1239,6 +1245,8 @@ static int ar231x_mdiobus_probe (struct
return PTR_ERR(phydev);
}
diff --git a/target/linux/atheros/patches-2.6.33/200-ar2313_enable_mvswitch.patch b/target/linux/atheros/patches-2.6.33/200-ar2313_enable_mvswitch.patch
index b97a62d81..60025e43e 100644
--- a/target/linux/atheros/patches-2.6.33/200-ar2313_enable_mvswitch.patch
+++ b/target/linux/atheros/patches-2.6.33/200-ar2313_enable_mvswitch.patch
@@ -48,7 +48,7 @@
/* reset descriptor's curr_addr */
rxdesc->addr = virt_to_phys(skb_new->data);
-@@ -1239,6 +1245,8 @@ static int ar231x_mdiobus_probe (struct
+@@ -1239,6 +1245,8 @@ static int ar231x_mdiobus_probe (struct
return PTR_ERR(phydev);
}
diff --git a/target/linux/atheros/patches-2.6.34/001-get_c0_compare_int_fix.patch b/target/linux/atheros/patches-2.6.34/001-get_c0_compare_int_fix.patch
new file mode 100644
index 000000000..43da96c3f
--- /dev/null
+++ b/target/linux/atheros/patches-2.6.34/001-get_c0_compare_int_fix.patch
@@ -0,0 +1,39 @@
+Fix the usage of get_c0_compare_int: override cp0_compare_irq if the returned
+value is in the MIPS CPU IRQ range to ensure that c0_compare_int_usable()
+still works.
+
+Signed-off-by: Felix Fietkau <nbd@openwrt.org>
+
+--- a/arch/mips/kernel/cevt-r4k.c
++++ b/arch/mips/kernel/cevt-r4k.c
+@@ -168,20 +168,23 @@ int __cpuinit r4k_clockevent_init(void)
+ struct clock_event_device *cd;
+ unsigned int irq;
+
+- if (!cpu_has_counter || !mips_hpt_frequency)
+- return -ENXIO;
+-
+- if (!c0_compare_int_usable())
+- return -ENXIO;
+-
+ /*
+ * With vectored interrupts things are getting platform specific.
+ * get_c0_compare_int is a hook to allow a platform to return the
+ * interrupt number of it's liking.
+ */
+ irq = MIPS_CPU_IRQ_BASE + cp0_compare_irq;
+- if (get_c0_compare_int)
++ if (get_c0_compare_int) {
+ irq = get_c0_compare_int();
++ if ((irq >= MIPS_CPU_IRQ_BASE) && (irq < MIPS_CPU_IRQ_BASE + 8))
++ cp0_compare_irq = irq - MIPS_CPU_IRQ_BASE;
++ }
++
++ if (!cpu_has_counter || !mips_hpt_frequency)
++ return -ENXIO;
++
++ if (!c0_compare_int_usable())
++ return -ENXIO;
+
+ cd = &per_cpu(mips_clockevent_device, cpu);
+
diff --git a/target/linux/atheros/patches-2.6.34/100-board.patch b/target/linux/atheros/patches-2.6.34/100-board.patch
new file mode 100644
index 000000000..0731de1f7
--- /dev/null
+++ b/target/linux/atheros/patches-2.6.34/100-board.patch
@@ -0,0 +1,3126 @@
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -84,6 +84,19 @@ config BCM63XX
+ help
+ Support for BCM63XX based boards
+
++config ATHEROS_AR231X
++ bool "Atheros 231x/531x SoC support"
++ select CEVT_R4K
++ select CSRC_R4K
++ select DMA_NONCOHERENT
++ select IRQ_CPU
++ select SYS_HAS_CPU_MIPS32_R1
++ select SYS_SUPPORTS_BIG_ENDIAN
++ select SYS_SUPPORTS_32BIT_KERNEL
++ select GENERIC_GPIO
++ help
++ Support for AR231x and AR531x based boards
++
+ config MIPS_COBALT
+ bool "Cobalt Server"
+ select CEVT_R4K
+@@ -681,6 +694,7 @@ config CAVIUM_OCTEON_REFERENCE_BOARD
+
+ endchoice
+
++source "arch/mips/ar231x/Kconfig"
+ source "arch/mips/alchemy/Kconfig"
+ source "arch/mips/bcm63xx/Kconfig"
+ source "arch/mips/jazz/Kconfig"
+--- a/arch/mips/Makefile
++++ b/arch/mips/Makefile
+@@ -319,6 +319,13 @@ cflags-$(CONFIG_SOC_AU1X00) += -I$(srctr
+
+
+ #
++# Atheros AR5312/AR2312 WiSoC
++#
++core-$(CONFIG_ATHEROS_AR231X) += arch/mips/ar231x/
++cflags-$(CONFIG_ATHEROS_AR231X) += -I$(srctree)/arch/mips/include/asm/mach-ar231x
++load-$(CONFIG_ATHEROS_AR231X) += 0xffffffff80041000
++
++#
+ # Cobalt Server
+ #
+ core-$(CONFIG_MIPS_COBALT) += arch/mips/cobalt/
+--- /dev/null
++++ b/arch/mips/ar231x/Kconfig
+@@ -0,0 +1,17 @@
++config ATHEROS_AR5312
++ bool "Atheros 5312/2312+ support"
++ depends on ATHEROS_AR231X
++ default y
++
++config ATHEROS_AR2315
++ bool "Atheros 2315+ support"
++ depends on ATHEROS_AR231X
++ select DMA_NONCOHERENT
++ select CEVT_R4K
++ select CSRC_R4K
++ select IRQ_CPU
++ select SYS_HAS_CPU_MIPS32_R1
++ select SYS_SUPPORTS_32BIT_KERNEL
++ select SYS_SUPPORTS_BIG_ENDIAN
++ select GENERIC_GPIO
++ default y
+--- /dev/null
++++ b/arch/mips/ar231x/Makefile
+@@ -0,0 +1,13 @@
++#
++# This file is subject to the terms and conditions of the GNU General Public
++# License. See the file "COPYING" in the main directory of this archive
++# for more details.
++#
++# Copyright (C) 2006 FON Technology, SL.
++# Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
++# Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org>
++#
++
++obj-y += board.o prom.o devices.o
++obj-$(CONFIG_ATHEROS_AR5312) += ar5312.o
++obj-$(CONFIG_ATHEROS_AR2315) += ar2315.o
+--- /dev/null
++++ b/arch/mips/ar231x/board.c
+@@ -0,0 +1,251 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License. See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
++ * Copyright (C) 2006 FON Technology, SL.
++ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
++ * Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org>
++ */
++
++#include <generated/autoconf.h>
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/types.h>
++#include <linux/string.h>
++#include <linux/platform_device.h>
++#include <linux/kernel.h>
++#include <linux/random.h>
++#include <linux/etherdevice.h>
++#include <asm/irq_cpu.h>
++#include <asm/reboot.h>
++#include <asm/io.h>
++
++#include <ar231x_platform.h>
++#include "devices.h"
++#include "ar5312.h"
++#include "ar2315.h"
++
++void (*ar231x_irq_dispatch)(void);
++
++static inline bool
++check_radio_magic(u8 *addr)
++{
++ addr += 0x7a; /* offset for flash magic */
++ if ((addr[0] == 0x5a) && (addr[1] == 0xa5)) {
++ return 1;
++ }
++ return 0;
++}
++
++static inline bool
++check_board_data(u8 *flash_limit, u8 *addr, bool broken)
++{
++ /* config magic found */
++ if (*((u32 *)addr) == AR531X_BD_MAGIC)
++ return 1;
++
++ if (!broken)
++ return 0;
++
++ if (check_radio_magic(addr + 0xf8))
++ ar231x_board.radio = addr + 0xf8;
++ if ((addr < flash_limit + 0x10000) &&
++ check_radio_magic(addr + 0x10000))
++ ar231x_board.radio = addr + 0x10000;
++
++ if (ar231x_board.radio) {
++ /* broken board data detected, use radio data to find the offset,
++ * user will fix this */
++ return 1;
++ }
++ return 0;
++}
++
++static u8 *
++find_board_config(u8 *flash_limit, bool broken)
++{
++ u8 *addr;
++ int found = 0;
++
++ for (addr = flash_limit - 0x1000;
++ addr >= flash_limit - 0x30000;
++ addr -= 0x1000) {
++
++ if (check_board_data(flash_limit, addr, broken)) {
++ found = 1;
++ break;
++ }
++ }
++
++ if (!found)
++ addr = NULL;
++
++ return addr;
++}
++
++static u8 *
++find_radio_config(u8 *flash_limit, u8 *board_config)
++{
++ int found;
++ u8 *radio_config;
++
++ /*
++ * Now find the start of Radio Configuration data, using heuristics:
++ * Search forward from Board Configuration data by 0x1000 bytes
++ * at a time until we find non-0xffffffff.
++ */
++ found = 0;
++ for (radio_config = board_config + 0x1000;
++ (radio_config < flash_limit);
++ radio_config += 0x1000) {
++ if ((*(u32 *)radio_config != 0xffffffff) &&
++ check_radio_magic(radio_config)) {
++ found = 1;
++ break;
++ }
++ }
++
++ /* AR2316 relocates radio config to new location */
++ if (!found) {
++ for (radio_config = board_config + 0xf8;
++ (radio_config < flash_limit - 0x1000 + 0xf8);
++ radio_config += 0x1000) {
++ if ((*(u32 *)radio_config != 0xffffffff) &&
++ check_radio_magic(radio_config)) {
++ found = 1;
++ break;
++ }
++ }
++ }
++
++ if (!found) {
++ printk("Could not find Radio Configuration data\n");
++ radio_config = 0;
++ }
++
++ return (u8 *) radio_config;
++}
++
++int __init
++ar231x_find_config(u8 *flash_limit)
++{
++ struct ar231x_boarddata *config;
++ unsigned int rcfg_size;
++ int broken_boarddata = 0;
++ u8 *bcfg, *rcfg;
++ u8 *board_data;
++ u8 *radio_data;
++ u32 offset;
++
++ ar231x_board.config = NULL;
++ ar231x_board.radio = NULL;
++ /* Copy the board and radio data to RAM, because accessing the mapped
++ * memory of the flash directly after booting is not safe */
++
++ /* Try to find valid board and radio data */
++ bcfg = find_board_config(flash_limit, false);
++
++ /* If that fails, try to at least find valid radio data */
++ if (!bcfg) {
++ bcfg = find_board_config(flash_limit, true);
++ broken_boarddata = 1;
++ }
++
++ if (!bcfg) {
++ printk(KERN_WARNING "WARNING: No board configuration data found!\n");
++ return -ENODEV;
++ }
++
++ board_data = kzalloc(BOARD_CONFIG_BUFSZ, GFP_KERNEL);
++ ar231x_board.config = (struct ar231x_boarddata *) board_data;
++ memcpy(board_data, bcfg, 0x100);
++ if (broken_boarddata) {
++ printk(KERN_WARNING "WARNING: broken board data detected\n");
++ config = ar231x_board.config;
++ if (!memcmp(config->enet0_mac, "\x00\x00\x00\x00\x00\x00", 6)) {
++ printk(KERN_INFO "Fixing up empty mac addresses\n");
++ config->resetConfigGpio = 0xffff;
++ config->sysLedGpio = 0xffff;
++ random_ether_addr(config->wlan0_mac);
++ config->wlan0_mac[0] &= ~0x06;
++ random_ether_addr(config->enet0_mac);
++ random_ether_addr(config->enet1_mac);
++ }
++ }
++
++
++ /* Radio config starts 0x100 bytes after board config, regardless
++ * of what the physical layout on the flash chip looks like */
++
++ if (ar231x_board.radio)
++ rcfg = (u8 *) ar231x_board.radio;
++ else
++ rcfg = find_radio_config(flash_limit, bcfg);
++
++ if (!rcfg)
++ return -ENODEV;
++
++ radio_data = board_data + 0x100 + ((rcfg - bcfg) & 0xfff);
++ ar231x_board.radio = radio_data;
++ offset = radio_data - board_data;
++ printk(KERN_INFO "Radio config found at offset 0x%x(0x%x)\n", rcfg - bcfg, offset);
++ rcfg_size = BOARD_CONFIG_BUFSZ - offset;
++ memcpy(radio_data, rcfg, rcfg_size);
++
++ return 0;
++}
++
++static void
++ar231x_halt(void)
++{
++ local_irq_disable();
++ while (1);
++}
++
++void __init
++plat_mem_setup(void)
++{
++ _machine_halt = ar231x_halt;
++ pm_power_off = ar231x_halt;
++
++ ar5312_plat_setup();
++ ar2315_plat_setup();
++
++ /* Disable data watchpoints */
++ write_c0_watchlo0(0);
++}
++
++
++asmlinkage void
++plat_irq_dispatch(void)
++{
++ ar231x_irq_dispatch();
++}
++
++void __init
++plat_time_init(void)
++{
++ ar5312_time_init();
++ ar2315_time_init();
++}
++
++unsigned int __cpuinit
++get_c0_compare_int(void)
++{
++ return CP0_LEGACY_COMPARE_IRQ;
++}
++
++void __init
++arch_init_irq(void)
++{
++ clear_c0_status(ST0_IM);
++ mips_cpu_irq_init();
++
++ /* Initialize interrupt controllers */
++ ar5312_irq_init();
++ ar2315_irq_init();
++}
++
++
+--- /dev/null
++++ b/arch/mips/ar231x/prom.c
+@@ -0,0 +1,37 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License. See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright MontaVista Software Inc
++ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
++ * Copyright (C) 2006 FON Technology, SL.
++ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
++ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
++ */
++
++/*
++ * Prom setup file for ar531x
++ */
++
++#include <linux/init.h>
++#include <generated/autoconf.h>
++#include <linux/kernel.h>
++#include <linux/string.h>
++#include <linux/mm.h>
++#include <linux/bootmem.h>
++
++#include <asm/bootinfo.h>
++#include <asm/addrspace.h>
++#include "ar5312.h"
++#include "ar2315.h"
++
++void __init prom_init(void)
++{
++ ar5312_prom_init();
++ ar2315_prom_init();
++}
++
++void __init prom_free_prom_memory(void)
++{
++}
+--- /dev/null
++++ b/arch/mips/include/asm/mach-ar231x/ar231x_platform.h
+@@ -0,0 +1,83 @@
++#ifndef __AR531X_PLATFORM_H
++#define __AR531X_PLATFORM_H
++
++/*
++ * This is board-specific data that is stored in a "fixed" location in flash.
++ * It is shared across operating systems, so it should not be changed lightly.
++ * The main reason we need it is in order to extract the ethernet MAC
++ * address(es).
++ */
++struct ar231x_boarddata {
++ u32 magic; /* board data is valid */
++#define AR531X_BD_MAGIC 0x35333131 /* "5311", for all 531x platforms */
++ u16 cksum; /* checksum (starting with BD_REV 2) */
++ u16 rev; /* revision of this struct */
++#define BD_REV 4
++ char boardName[64]; /* Name of board */
++ u16 major; /* Board major number */
++ u16 minor; /* Board minor number */
++ u32 flags; /* Board configuration */
++#define BD_ENET0 0x00000001 /* ENET0 is stuffed */
++#define BD_ENET1 0x00000002 /* ENET1 is stuffed */
++#define BD_UART1 0x00000004 /* UART1 is stuffed */
++#define BD_UART0 0x00000008 /* UART0 is stuffed (dma) */
++#define BD_RSTFACTORY 0x00000010 /* Reset factory defaults stuffed */
++#define BD_SYSLED 0x00000020 /* System LED stuffed */
++#define BD_EXTUARTCLK 0x00000040 /* External UART clock */
++#define BD_CPUFREQ 0x00000080 /* cpu freq is valid in nvram */
++#define BD_SYSFREQ 0x00000100 /* sys freq is set in nvram */
++#define BD_WLAN0 0x00000200 /* Enable WLAN0 */
++#define BD_MEMCAP 0x00000400 /* CAP SDRAM @ memCap for testing */
++#define BD_DISWATCHDOG 0x00000800 /* disable system watchdog */
++#define BD_WLAN1 0x00001000 /* Enable WLAN1 (ar5212) */
++#define BD_ISCASPER 0x00002000 /* FLAG for AR2312 */
++#define BD_WLAN0_2G_EN 0x00004000 /* FLAG for radio0_2G */
++#define BD_WLAN0_5G_EN 0x00008000 /* FLAG for radio0_2G */
++#define BD_WLAN1_2G_EN 0x00020000 /* FLAG for radio0_2G */
++#define BD_WLAN1_5G_EN 0x00040000 /* FLAG for radio0_2G */
++ u16 resetConfigGpio; /* Reset factory GPIO pin */
++ u16 sysLedGpio; /* System LED GPIO pin */
++
++ u32 cpuFreq; /* CPU core frequency in Hz */
++ u32 sysFreq; /* System frequency in Hz */
++ u32 cntFreq; /* Calculated C0_COUNT frequency */
++
++ u8 wlan0_mac[6];
++ u8 enet0_mac[6];
++ u8 enet1_mac[6];
++
++ u16 pciId; /* Pseudo PCIID for common code */
++ u16 memCap; /* cap bank1 in MB */
++
++ /* version 3 */
++ u8 wlan1_mac[6]; /* (ar5212) */
++};
++
++#define BOARD_CONFIG_BUFSZ 0x1000
++
++/*
++ * Platform device information for the Wireless MAC
++ */
++struct ar231x_board_config {
++ u16 devid;
++
++ /* board config data */
++ struct ar231x_boarddata *config;
++
++ /* radio calibration data */
++ const char *radio;
++};
++
++/*
++ * Platform device information for the Ethernet MAC
++ */
++struct ar231x_eth {
++ u32 reset_base;
++ u32 reset_mac;
++ u32 reset_phy;
++ u32 phy_base;
++ struct ar231x_board_config *config;
++ char *macaddr;
++};
++
++#endif /* __AR531X_PLATFORM_H */
+--- /dev/null
++++ b/arch/mips/include/asm/mach-ar231x/cpu-feature-overrides.h
+@@ -0,0 +1,84 @@
++/*
++ * Atheros SoC specific CPU feature overrides
++ *
++ * Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org>
++ *
++ * This file was derived from: include/asm-mips/cpu-features.h
++ * Copyright (C) 2003, 2004 Ralf Baechle
++ * Copyright (C) 2004 Maciej W. Rozycki
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ *
++ */
++#ifndef __ASM_MACH_ATHEROS_CPU_FEATURE_OVERRIDES_H
++#define __ASM_MACH_ATHEROS_CPU_FEATURE_OVERRIDES_H
++
++/*
++ * The ATHEROS SoCs have MIPS 4Kc/4KEc core.
++ */
++#define cpu_has_tlb 1
++#define cpu_has_4kex 1
++#define cpu_has_3k_cache 0
++#define cpu_has_4k_cache 1
++#define cpu_has_tx39_cache 0
++#define cpu_has_sb1_cache 0
++#define cpu_has_fpu 0
++#define cpu_has_32fpr 0
++#define cpu_has_counter 1
++/* #define cpu_has_watch ? */
++/* #define cpu_has_divec ? */
++/* #define cpu_has_vce ? */
++/* #define cpu_has_cache_cdex_p ? */
++/* #define cpu_has_cache_cdex_s ? */
++/* #define cpu_has_prefetch ? */
++/* #define cpu_has_mcheck ? */
++#define cpu_has_ejtag 1
++
++#if !defined(CONFIG_ATHEROS_AR5312)
++# define cpu_has_llsc 1
++#else
++/*
++ * The MIPS 4Kc V0.9 core in the AR5312/AR2312 have problems with the
++ * ll/sc instructions.
++ */
++# define cpu_has_llsc 0
++#endif
++
++#define cpu_has_mips16 0
++#define cpu_has_mdmx 0
++#define cpu_has_mips3d 0
++#define cpu_has_smartmips 0
++
++/* #define cpu_has_vtag_icache ? */
++/* #define cpu_has_dc_aliases ? */
++/* #define cpu_has_ic_fills_f_dc ? */
++/* #define cpu_has_pindexed_dcache ? */
++
++/* #define cpu_icache_snoops_remote_store ? */
++
++#define cpu_has_mips32r1 1
++
++#if !defined(CONFIG_ATHEROS_AR5312)
++# define cpu_has_mips32r2 1
++#endif
++
++#define cpu_has_mips64r1 0
++#define cpu_has_mips64r2 0
++
++#define cpu_has_dsp 0
++#define cpu_has_mipsmt 0
++
++/* #define cpu_has_nofpuex ? */
++#define cpu_has_64bits 0
++#define cpu_has_64bit_zero_reg 0
++#define cpu_has_64bit_gp_regs 0
++#define cpu_has_64bit_addresses 0
++
++/* #define cpu_has_inclusive_pcaches ? */
++
++/* #define cpu_dcache_line_size() ? */
++/* #define cpu_icache_line_size() ? */
++
++#endif /* __ASM_MACH_ATHEROS_CPU_FEATURE_OVERRIDES_H */
+--- /dev/null
++++ b/arch/mips/include/asm/mach-ar231x/dma-coherence.h
+@@ -0,0 +1,64 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License. See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2006 Ralf Baechle <ralf@linux-mips.org>
++ * Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org>
++ *
++ */
++#ifndef __ASM_MACH_GENERIC_DMA_COHERENCE_H
++#define __ASM_MACH_GENERIC_DMA_COHERENCE_H
++
++#define PCI_DMA_OFFSET 0x20000000
++
++struct device;
++
++static dma_addr_t plat_map_dma_mem(struct device *dev, void *addr, size_t size)
++{
++ return virt_to_phys(addr) + (dev != NULL ? PCI_DMA_OFFSET : 0);
++}
++
++static dma_addr_t plat_map_dma_mem_page(struct device *dev, struct page *page)
++{
++ return page_to_phys(page) + (dev != NULL ? PCI_DMA_OFFSET : 0);
++}
++
++static inline unsigned long plat_dma_addr_to_phys(struct device *dev,
++ dma_addr_t dma_addr)
++{
++ return (dma_addr > PCI_DMA_OFFSET ? dma_addr - PCI_DMA_OFFSET : dma_addr);
++}
++
++static inline void plat_unmap_dma_mem(struct device *dev, dma_addr_t dma_addr,
++ size_t size, enum dma_data_direction direction)
++{
++}
++
++static inline int plat_dma_supported(struct device *dev, u64 mask)
++{
++ return 1;
++}
++
++static inline void plat_extra_sync_for_device(struct device *dev)
++{
++ return;
++}
++
++static inline int plat_dma_mapping_error(struct device *dev,
++ dma_addr_t dma_addr)
++{
++ return 0;
++}
++
++static inline int plat_device_is_coherent(struct device *dev)
++{
++#ifdef CONFIG_DMA_COHERENT
++ return 1;
++#endif
++#ifdef CONFIG_DMA_NONCOHERENT
++ return 0;
++#endif
++}
++
++#endif /* __ASM_MACH_GENERIC_DMA_COHERENCE_H */
+--- /dev/null
++++ b/arch/mips/include/asm/mach-ar231x/gpio.h
+@@ -0,0 +1,79 @@
++#ifndef _ATHEROS_GPIO_H_
++#define _ATHEROS_GPIO_H_
++
++#include <ar231x.h>
++
++struct ar231x_gpiodev {
++ u32 valid_mask;
++ u32 (*get_output)(void);
++ u32 (*set_output)(u32 mask, u32 val);
++ u32 (*get)(void);
++ u32 (*set)(u32 mask, u32 val);
++};
++
++extern const struct ar231x_gpiodev *ar231x_gpiodev;
++
++/*
++ * Wrappers for the generic GPIO layer
++ */
++
++static inline int gpio_direction_input(unsigned gpio) {
++ u32 mask = 1 << gpio;
++
++ if (!(ar231x_gpiodev->valid_mask & mask))
++ return -ENXIO;
++
++ ar231x_gpiodev->set_output(mask, 0);
++ return 0;
++}
++
++static inline void gpio_set_value(unsigned gpio, int value) {
++ u32 mask = 1 << gpio;
++
++ if (!(ar231x_gpiodev->valid_mask & mask))
++ return;
++
++ ar231x_gpiodev->set(mask, (!!value) * mask);
++}
++
++static inline int gpio_direction_output(unsigned gpio, int value) {
++ u32 mask = 1 << gpio;
++
++ if (!(ar231x_gpiodev->valid_mask & mask))
++ return -ENXIO;
++
++ ar231x_gpiodev->set_output(mask, mask);
++ ar231x_gpiodev->set(mask, (!!value) * mask);
++ return 0;
++}
++
++/* Reads the gpio pin. Unchecked function */
++static inline int gpio_get_value(unsigned gpio) {
++ u32 mask = 1 << gpio;
++
++ if (!(ar231x_gpiodev->valid_mask & mask))
++ return 0;
++
++ return !!(ar231x_gpiodev->get() & mask);
++}
++
++static inline int gpio_request(unsigned gpio, const char *label) {
++ return 0;
++}
++
++static inline void gpio_free(unsigned gpio) {
++}
++
++/* Returns IRQ to attach for gpio. Unchecked function */
++static inline int gpio_to_irq(unsigned gpio) {
++ return AR531X_GPIO_IRQ(gpio);
++}
++
++/* Returns gpio for IRQ attached. Unchecked function */
++static inline int irq_to_gpio(unsigned irq) {
++ return (irq - (AR531X_GPIO_IRQ(0)));
++}
++
++#include <asm-generic/gpio.h> /* cansleep wrappers */
++
++#endif
+--- /dev/null
++++ b/arch/mips/include/asm/mach-ar231x/reset.h
+@@ -0,0 +1,6 @@
++#ifndef __AR531X_RESET_H
++#define __AR531X_RESET_H
++
++void ar531x_disable_reset_button(void);
++
++#endif /* __AR531X_RESET_H */
+--- /dev/null
++++ b/arch/mips/include/asm/mach-ar231x/war.h
+@@ -0,0 +1,25 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License. See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2008 Felix Fietkau <nbd@openwrt.org>
++ */
++#ifndef __ASM_MIPS_MACH_ATHEROS_WAR_H
++#define __ASM_MIPS_MACH_ATHEROS_WAR_H
++
++#define R4600_V1_INDEX_ICACHEOP_WAR 0
++#define R4600_V1_HIT_CACHEOP_WAR 0
++#define R4600_V2_HIT_CACHEOP_WAR 0
++#define R5432_CP0_INTERRUPT_WAR 0
++#define BCM1250_M3_WAR 0
++#define SIBYTE_1956_WAR 0
++#define MIPS4K_ICACHE_REFILL_WAR 0
++#define MIPS_CACHE_SYNC_WAR 0
++#define TX49XX_ICACHE_INDEX_INV_WAR 0
++#define RM9000_CDEX_SMP_WAR 0
++#define ICACHE_REFILLS_WORKAROUND_WAR 0
++#define R10000_LLSC_WAR 0
++#define MIPS34K_MISSED_ITLB_WAR 0
++
++#endif /* __ASM_MIPS_MACH_ATHEROS_WAR_H */
+--- /dev/null
++++ b/arch/mips/include/asm/mach-ar231x/ar2315_regs.h
+@@ -0,0 +1,580 @@
++/*
++ * Register definitions for AR2315+
++ *
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License. See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
++ * Copyright (C) 2006 FON Technology, SL.
++ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
++ * Copyright (C) 2006-2008 Felix Fietkau <nbd@openwrt.org>
++ */
++
++#ifndef __AR2315_REG_H
++#define __AR2315_REG_H
++
++/*
++ * IRQs
++ */
++#define AR2315_IRQ_MISC_INTRS MIPS_CPU_IRQ_BASE+2 /* C0_CAUSE: 0x0400 */
++#define AR2315_IRQ_WLAN0_INTRS MIPS_CPU_IRQ_BASE+3 /* C0_CAUSE: 0x0800 */
++#define AR2315_IRQ_ENET0_INTRS MIPS_CPU_IRQ_BASE+4 /* C0_CAUSE: 0x1000 */
++#define AR2315_IRQ_LCBUS_PCI MIPS_CPU_IRQ_BASE+5 /* C0_CAUSE: 0x2000 */
++#define AR2315_IRQ_WLAN0_POLL MIPS_CPU_IRQ_BASE+6 /* C0_CAUSE: 0x4000 */
++
++/*
++ * Address map
++ */
++#define AR2315_SPI_READ 0x08000000 /* SPI FLASH */
++#define AR2315_WLAN0 0xB0000000 /* Wireless MMR */
++#define AR2315_PCI 0xB0100000 /* PCI MMR */
++#define AR2315_SDRAMCTL 0xB0300000 /* SDRAM MMR */
++#define AR2315_LOCAL 0xB0400000 /* LOCAL BUS MMR */
++#define AR2315_ENET0 0xB0500000 /* ETHERNET MMR */
++#define AR2315_DSLBASE 0xB1000000 /* RESET CONTROL MMR */
++#define AR2315_UART0 0xB1100003 /* UART MMR */
++#define AR2315_SPI 0xB1300000 /* SPI FLASH MMR */
++#define AR2315_PCIEXT 0x80000000 /* pci external */
++
++/*
++ * Reset Register
++ */
++#define AR2315_COLD_RESET (AR2315_DSLBASE + 0x0000)
++
++#define AR2315_RESET_COLD_AHB 0x00000001
++#define AR2315_RESET_COLD_APB 0x00000002
++#define AR2315_RESET_COLD_CPU 0x00000004
++#define AR2315_RESET_COLD_CPUWARM 0x00000008
++#define AR2315_RESET_SYSTEM (RESET_COLD_CPU | RESET_COLD_APB | RESET_COLD_AHB) /* full system */
++#define AR2317_RESET_SYSTEM 0x00000010
++
++
++#define AR2315_RESET (AR2315_DSLBASE + 0x0004)
++
++#define AR2315_RESET_WARM_WLAN0_MAC 0x00000001 /* warm reset WLAN0 MAC */
++#define AR2315_RESET_WARM_WLAN0_BB 0x00000002 /* warm reset WLAN0 BaseBand */
++#define AR2315_RESET_MPEGTS_RSVD 0x00000004 /* warm reset MPEG-TS */
++#define AR2315_RESET_PCIDMA 0x00000008 /* warm reset PCI ahb/dma */
++#define AR2315_RESET_MEMCTL 0x00000010 /* warm reset memory controller */
++#define AR2315_RESET_LOCAL 0x00000020 /* warm reset local bus */
++#define AR2315_RESET_I2C_RSVD 0x00000040 /* warm reset I2C bus */
++#define AR2315_RESET_SPI 0x00000080 /* warm reset SPI interface */
++#define AR2315_RESET_UART0 0x00000100 /* warm reset UART0 */
++#define AR2315_RESET_IR_RSVD 0x00000200 /* warm reset IR interface */
++#define AR2315_RESET_EPHY0 0x00000400 /* cold reset ENET0 phy */
++#define AR2315_RESET_ENET0 0x00000800 /* cold reset ENET0 mac */
++
++/*
++ * AHB master arbitration control
++ */
++#define AR2315_AHB_ARB_CTL (AR2315_DSLBASE + 0x0008)
++
++#define AR2315_ARB_CPU 0x00000001 /* CPU, default */
++#define AR2315_ARB_WLAN 0x00000002 /* WLAN */
++#define AR2315_ARB_MPEGTS_RSVD 0x00000004 /* MPEG-TS */
++#define AR2315_ARB_LOCAL 0x00000008 /* LOCAL */
++#define AR2315_ARB_PCI 0x00000010 /* PCI */
++#define AR2315_ARB_ETHERNET 0x00000020 /* Ethernet */
++#define AR2315_ARB_RETRY 0x00000100 /* retry policy, debug only */
++
++/*
++ * Config Register
++ */
++#define AR2315_ENDIAN_CTL (AR2315_DSLBASE + 0x000c)
++
++#define AR2315_CONFIG_AHB 0x00000001 /* EC - AHB bridge endianess */
++#define AR2315_CONFIG_WLAN 0x00000002 /* WLAN byteswap */
++#define AR2315_CONFIG_MPEGTS_RSVD 0x00000004 /* MPEG-TS byteswap */
++#define AR2315_CONFIG_PCI 0x00000008 /* PCI byteswap */
++#define AR2315_CONFIG_MEMCTL 0x00000010 /* Memory controller endianess */
++#define AR2315_CONFIG_LOCAL 0x00000020 /* Local bus byteswap */
++#define AR2315_CONFIG_ETHERNET 0x00000040 /* Ethernet byteswap */
++
++#define AR2315_CONFIG_MERGE 0x00000200 /* CPU write buffer merge */
++#define AR2315_CONFIG_CPU 0x00000400 /* CPU big endian */
++#define AR2315_CONFIG_PCIAHB 0x00000800
++#define AR2315_CONFIG_PCIAHB_BRIDGE 0x00001000
++#define AR2315_CONFIG_SPI 0x00008000 /* SPI byteswap */
++#define AR2315_CONFIG_CPU_DRAM 0x00010000
++#define AR2315_CONFIG_CPU_PCI 0x00020000
++#define AR2315_CONFIG_CPU_MMR 0x00040000
++#define AR2315_CONFIG_BIG 0x00000400
++
++
++/*
++ * NMI control
++ */
++#define AR2315_NMI_CTL (AR2315_DSLBASE + 0x0010)
++
++#define AR2315_NMI_EN 1
++
++/*
++ * Revision Register - Initial value is 0x3010 (WMAC 3.0, AR531X 1.0).
++ */
++#define AR2315_SREV (AR2315_DSLBASE + 0x0014)
++
++#define AR2315_REV_MAJ 0x00f0
++#define AR2315_REV_MAJ_S 4
++#define AR2315_REV_MIN 0x000f
++#define AR2315_REV_MIN_S 0
++#define AR2315_REV_CHIP (AR2315_REV_MAJ|AR2315_REV_MIN)
++
++/*
++ * Interface Enable
++ */
++#define AR2315_IF_CTL (AR2315_DSLBASE + 0x0018)
++
++#define AR2315_IF_MASK 0x00000007
++#define AR2315_IF_DISABLED 0
++#define AR2315_IF_PCI 1
++#define AR2315_IF_TS_LOCAL 2
++#define AR2315_IF_ALL 3 /* only for emulation with separate pins */
++#define AR2315_IF_LOCAL_HOST 0x00000008
++#define AR2315_IF_PCI_HOST 0x00000010
++#define AR2315_IF_PCI_INTR 0x00000020
++#define AR2315_IF_PCI_CLK_MASK 0x00030000
++#define AR2315_IF_PCI_CLK_INPUT 0
++#define AR2315_IF_PCI_CLK_OUTPUT_LOW 1
++#define AR2315_IF_PCI_CLK_OUTPUT_CLK 2
++#define AR2315_IF_PCI_CLK_OUTPUT_HIGH 3
++#define AR2315_IF_PCI_CLK_SHIFT 16
++
++/*
++ * APB Interrupt control
++ */
++
++#define AR2315_ISR (AR2315_DSLBASE + 0x0020)
++#define AR2315_IMR (AR2315_DSLBASE + 0x0024)
++#define AR2315_GISR (AR2315_DSLBASE + 0x0028)
++
++#define AR2315_ISR_UART0 0x0001 /* high speed UART */
++#define AR2315_ISR_I2C_RSVD 0x0002 /* I2C bus */
++#define AR2315_ISR_SPI 0x0004 /* SPI bus */
++#define AR2315_ISR_AHB 0x0008 /* AHB error */
++#define AR2315_ISR_APB 0x0010 /* APB error */
++#define AR2315_ISR_TIMER 0x0020 /* timer */
++#define AR2315_ISR_GPIO 0x0040 /* GPIO */
++#define AR2315_ISR_WD 0x0080 /* watchdog */
++#define AR2315_ISR_IR_RSVD 0x0100 /* IR */
++
++#define AR2315_GISR_MISC 0x0001
++#define AR2315_GISR_WLAN0 0x0002
++#define AR2315_GISR_MPEGTS_RSVD 0x0004
++#define AR2315_GISR_LOCALPCI 0x0008
++#define AR2315_GISR_WMACPOLL 0x0010
++#define AR2315_GISR_TIMER 0x0020
++#define AR2315_GISR_ETHERNET 0x0040
++
++/*
++ * Interrupt routing from IO to the processor IP bits
++ * Define our inter mask and level
++ */
++#define AR2315_INTR_MISCIO SR_IBIT3
++#define AR2315_INTR_WLAN0 SR_IBIT4
++#define AR2315_INTR_ENET0 SR_IBIT5
++#define AR2315_INTR_LOCALPCI SR_IBIT6
++#define AR2315_INTR_WMACPOLL SR_IBIT7
++#define AR2315_INTR_COMPARE SR_IBIT8
++
++/*
++ * Timers
++ */
++#define AR2315_TIMER (AR2315_DSLBASE + 0x0030)
++#define AR2315_RELOAD (AR2315_DSLBASE + 0x0034)
++#define AR2315_WD (AR2315_DSLBASE + 0x0038)
++#define AR2315_WDC (AR2315_DSLBASE + 0x003c)
++
++#define AR2315_WDC_IGNORE_EXPIRATION 0x00000000
++#define AR2315_WDC_NMI 0x00000001 /* NMI on watchdog */
++#define AR2315_WDC_RESET 0x00000002 /* reset on watchdog */
++
++/*
++ * CPU Performance Counters
++ */
++#define AR2315_PERFCNT0 (AR2315_DSLBASE + 0x0048)
++#define AR2315_PERFCNT1 (AR2315_DSLBASE + 0x004c)
++
++#define AR2315_PERF0_DATAHIT 0x0001 /* Count Data Cache Hits */
++#define AR2315_PERF0_DATAMISS 0x0002 /* Count Data Cache Misses */
++#define AR2315_PERF0_INSTHIT 0x0004 /* Count Instruction Cache Hits */
++#define AR2315_PERF0_INSTMISS 0x0008 /* Count Instruction Cache Misses */
++#define AR2315_PERF0_ACTIVE 0x0010 /* Count Active Processor Cycles */
++#define AR2315_PERF0_WBHIT 0x0020 /* Count CPU Write Buffer Hits */
++#define AR2315_PERF0_WBMISS 0x0040 /* Count CPU Write Buffer Misses */
++
++#define AR2315_PERF1_EB_ARDY 0x0001 /* Count EB_ARdy signal */
++#define AR2315_PERF1_EB_AVALID 0x0002 /* Count EB_AValid signal */
++#define AR2315_PERF1_EB_WDRDY 0x0004 /* Count EB_WDRdy signal */
++#define AR2315_PERF1_EB_RDVAL 0x0008 /* Count EB_RdVal signal */
++#define AR2315_PERF1_VRADDR 0x0010 /* Count valid read address cycles */
++#define AR2315_PERF1_VWADDR 0x0020 /* Count valid write address cycles */
++#define AR2315_PERF1_VWDATA 0x0040 /* Count valid write data cycles */
++
++/*
++ * AHB Error Reporting.
++ */
++#define AR2315_AHB_ERR0 (AR2315_DSLBASE + 0x0050) /* error */
++#define AR2315_AHB_ERR1 (AR2315_DSLBASE + 0x0054) /* haddr */
++#define AR2315_AHB_ERR2 (AR2315_DSLBASE + 0x0058) /* hwdata */
++#define AR2315_AHB_ERR3 (AR2315_DSLBASE + 0x005c) /* hrdata */
++#define AR2315_AHB_ERR4 (AR2315_DSLBASE + 0x0060) /* status */
++
++#define AHB_ERROR_DET 1 /* AHB Error has been detected, */
++ /* write 1 to clear all bits in ERR0 */
++#define AHB_ERROR_OVR 2 /* AHB Error overflow has been detected */
++#define AHB_ERROR_WDT 4 /* AHB Error due to wdt instead of hresp */
++
++#define AR2315_PROCERR_HMAST 0x0000000f
++#define AR2315_PROCERR_HMAST_DFLT 0
++#define AR2315_PROCERR_HMAST_WMAC 1
++#define AR2315_PROCERR_HMAST_ENET 2
++#define AR2315_PROCERR_HMAST_PCIENDPT 3
++#define AR2315_PROCERR_HMAST_LOCAL 4
++#define AR2315_PROCERR_HMAST_CPU 5
++#define AR2315_PROCERR_HMAST_PCITGT 6
++
++#define AR2315_PROCERR_HMAST_S 0
++#define AR2315_PROCERR_HWRITE 0x00000010
++#define AR2315_PROCERR_HSIZE 0x00000060
++#define AR2315_PROCERR_HSIZE_S 5
++#define AR2315_PROCERR_HTRANS 0x00000180
++#define AR2315_PROCERR_HTRANS_S 7
++#define AR2315_PROCERR_HBURST 0x00000e00
++#define AR2315_PROCERR_HBURST_S 9
++
++/*
++ * Clock Control
++ */
++#define AR2315_PLLC_CTL (AR2315_DSLBASE + 0x0064)
++#define AR2315_PLLV_CTL (AR2315_DSLBASE + 0x0068)
++#define AR2315_CPUCLK (AR2315_DSLBASE + 0x006c)
++#define AR2315_AMBACLK (AR2315_DSLBASE + 0x0070)
++#define AR2315_SYNCCLK (AR2315_DSLBASE + 0x0074)
++#define AR2315_DSL_SLEEP_CTL (AR2315_DSLBASE + 0x0080)
++#define AR2315_DSL_SLEEP_DUR (AR2315_DSLBASE + 0x0084)
++
++/* PLLc Control fields */
++#define PLLC_REF_DIV_M 0x00000003
++#define PLLC_REF_DIV_S 0
++#define PLLC_FDBACK_DIV_M 0x0000007C
++#define PLLC_FDBACK_DIV_S 2
++#define PLLC_ADD_FDBACK_DIV_M 0x00000080
++#define PLLC_ADD_FDBACK_DIV_S 7
++#define PLLC_CLKC_DIV_M 0x0001c000
++#define PLLC_CLKC_DIV_S 14
++#define PLLC_CLKM_DIV_M 0x00700000
++#define PLLC_CLKM_DIV_S 20
++
++/* CPU CLK Control fields */
++#define CPUCLK_CLK_SEL_M 0x00000003
++#define CPUCLK_CLK_SEL_S 0
++#define CPUCLK_CLK_DIV_M 0x0000000c
++#define CPUCLK_CLK_DIV_S 2
++
++/* AMBA CLK Control fields */
++#define AMBACLK_CLK_SEL_M 0x00000003
++#define AMBACLK_CLK_SEL_S 0
++#define AMBACLK_CLK_DIV_M 0x0000000c
++#define AMBACLK_CLK_DIV_S 2
++
++/*
++ * GPIO
++ */
++#define AR2315_GPIO_DI (AR2315_DSLBASE + 0x0088)
++#define AR2315_GPIO_DO (AR2315_DSLBASE + 0x0090)
++#define AR2315_GPIO_CR (AR2315_DSLBASE + 0x0098)
++#define AR2315_GPIO_INT (AR2315_DSLBASE + 0x00a0)
++
++#define AR2315_GPIO_CR_M(x) (1 << (x)) /* mask for i/o */
++#define AR2315_GPIO_CR_O(x) (1 << (x)) /* output */
++#define AR2315_GPIO_CR_I(x) (0) /* input */
++
++#define AR2315_GPIO_INT_S(x) (x) /* interrupt enable */
++#define AR2315_GPIO_INT_M (0x3F) /* mask for int */
++#define AR2315_GPIO_INT_LVL(x) ((x) << 6) /* interrupt level */
++#define AR2315_GPIO_INT_LVL_M ((0x3) << 6) /* mask for int level */
++
++#define AR2315_GPIO_INT_MAX_Y 1 /* Maximum value of Y for AR5313_GPIO_INT_* macros */
++#define AR2315_GPIO_INT_LVL_OFF 0 /* Triggerring off */
++#define AR2315_GPIO_INT_LVL_LOW 1 /* Low Level Triggered */
++#define AR2315_GPIO_INT_LVL_HIGH 2 /* High Level Triggered */
++#define AR2315_GPIO_INT_LVL_EDGE 3 /* Edge Triggered */
++
++#define AR2315_RESET_GPIO 5
++#define AR2315_NUM_GPIO 22
++
++/*
++ * PCI Clock Control
++ */
++#define AR2315_PCICLK (AR2315_DSLBASE + 0x00a4)
++
++#define AR2315_PCICLK_INPUT_M 0x3
++#define AR2315_PCICLK_INPUT_S 0
++
++#define AR2315_PCICLK_PLLC_CLKM 0
++#define AR2315_PCICLK_PLLC_CLKM1 1
++#define AR2315_PCICLK_PLLC_CLKC 2
++#define AR2315_PCICLK_REF_CLK 3
++
++#define AR2315_PCICLK_DIV_M 0xc
++#define AR2315_PCICLK_DIV_S 2
++
++#define AR2315_PCICLK_IN_FREQ 0
++#define AR2315_PCICLK_IN_FREQ_DIV_6 1
++#define AR2315_PCICLK_IN_FREQ_DIV_8 2
++#define AR2315_PCICLK_IN_FREQ_DIV_10 3
++
++/*
++ * Observation Control Register
++ */
++#define AR2315_OCR (AR2315_DSLBASE + 0x00b0)
++#define OCR_GPIO0_IRIN 0x0040
++#define OCR_GPIO1_IROUT 0x0080
++#define OCR_GPIO3_RXCLR 0x0200
++
++/*
++ * General Clock Control
++ */
++
++#define AR2315_MISCCLK (AR2315_DSLBASE + 0x00b4)
++#define MISCCLK_PLLBYPASS_EN 0x00000001
++#define MISCCLK_PROCREFCLK 0x00000002
++
++/*
++ * SDRAM Controller
++ * - No read or write buffers are included.
++ */
++#define AR2315_MEM_CFG (AR2315_SDRAMCTL + 0x00)
++#define AR2315_MEM_CTRL (AR2315_SDRAMCTL + 0x0c)
++#define AR2315_MEM_REF (AR2315_SDRAMCTL + 0x10)
++
++#define SDRAM_DATA_WIDTH_M 0x00006000
++#define SDRAM_DATA_WIDTH_S 13
++
++#define SDRAM_COL_WIDTH_M 0x00001E00
++#define SDRAM_COL_WIDTH_S 9
++
++#define SDRAM_ROW_WIDTH_M 0x000001E0
++#define SDRAM_ROW_WIDTH_S 5
++
++#define SDRAM_BANKADDR_BITS_M 0x00000018
++#define SDRAM_BANKADDR_BITS_S 3
++
++/*
++ * SPI Flash Interface Registers
++ */
++
++#define AR2315_SPI_CTL (AR2315_SPI + 0x00)
++#define AR2315_SPI_OPCODE (AR2315_SPI + 0x04)
++#define AR2315_SPI_DATA (AR2315_SPI + 0x08)
++
++#define SPI_CTL_START 0x00000100
++#define SPI_CTL_BUSY 0x00010000
++#define SPI_CTL_TXCNT_MASK 0x0000000f
++#define SPI_CTL_RXCNT_MASK 0x000000f0
++#define SPI_CTL_TX_RX_CNT_MASK 0x000000ff
++#define SPI_CTL_SIZE_MASK 0x00060000
++
++#define SPI_CTL_CLK_SEL_MASK 0x03000000
++#define SPI_OPCODE_MASK 0x000000ff
++
++/*
++ * PCI Bus Interface Registers
++ */
++#define AR2315_PCI_1MS_REG (AR2315_PCI + 0x0008)
++#define AR2315_PCI_1MS_MASK 0x3FFFF /* # of AHB clk cycles in 1ms */
++
++#define AR2315_PCI_MISC_CONFIG (AR2315_PCI + 0x000c)
++#define AR2315_PCIMISC_TXD_EN 0x00000001 /* Enable TXD for fragments */
++#define AR2315_PCIMISC_CFG_SEL 0x00000002 /* mem or config cycles */
++#define AR2315_PCIMISC_GIG_MASK 0x0000000C /* bits 31-30 for pci req */
++#define AR2315_PCIMISC_RST_MODE 0x00000030
++#define AR2315_PCIRST_INPUT 0x00000000 /* 4:5=0 rst is input */
++#define AR2315_PCIRST_LOW 0x00000010 /* 4:5=1 rst to GND */
++#define AR2315_PCIRST_HIGH 0x00000020 /* 4:5=2 rst to VDD */
++#define AR2315_PCIGRANT_EN 0x00000000 /* 6:7=0 early grant en */
++#define AR2315_PCIGRANT_FRAME 0x00000040 /* 6:7=1 grant waits 4 frame */
++#define AR2315_PCIGRANT_IDLE 0x00000080 /* 6:7=2 grant waits 4 idle */
++#define AR2315_PCIGRANT_GAP 0x00000000 /* 6:7=2 grant waits 4 idle */
++#define AR2315_PCICACHE_DIS 0x00001000 /* PCI external access cache disable */
++
++#define AR2315_PCI_OUT_TSTAMP (AR2315_PCI + 0x0010)
++
++#define AR2315_PCI_UNCACHE_CFG (AR2315_PCI + 0x0014)
++
++#define AR2315_PCI_IN_EN (AR2315_PCI + 0x0100)
++#define AR2315_PCI_IN_EN0 0x01 /* Enable chain 0 */
++#define AR2315_PCI_IN_EN1 0x02 /* Enable chain 1 */
++#define AR2315_PCI_IN_EN2 0x04 /* Enable chain 2 */
++#define AR2315_PCI_IN_EN3 0x08 /* Enable chain 3 */
++
++#define AR2315_PCI_IN_DIS (AR2315_PCI + 0x0104)
++#define AR2315_PCI_IN_DIS0 0x01 /* Disable chain 0 */
++#define AR2315_PCI_IN_DIS1 0x02 /* Disable chain 1 */
++#define AR2315_PCI_IN_DIS2 0x04 /* Disable chain 2 */
++#define AR2315_PCI_IN_DIS3 0x08 /* Disable chain 3 */
++
++#define AR2315_PCI_IN_PTR (AR2315_PCI + 0x0200)
++
++#define AR2315_PCI_OUT_EN (AR2315_PCI + 0x0400)
++#define AR2315_PCI_OUT_EN0 0x01 /* Enable chain 0 */
++
++#define AR2315_PCI_OUT_DIS (AR2315_PCI + 0x0404)
++#define AR2315_PCI_OUT_DIS0 0x01 /* Disable chain 0 */
++
++#define AR2315_PCI_OUT_PTR (AR2315_PCI + 0x0408)
++
++#define AR2315_PCI_INT_STATUS (AR2315_PCI + 0x0500) /* write one to clr */
++#define AR2315_PCI_TXINT 0x00000001 /* Desc In Completed */
++#define AR2315_PCI_TXOK 0x00000002 /* Desc In OK */
++#define AR2315_PCI_TXERR 0x00000004 /* Desc In ERR */
++#define AR2315_PCI_TXEOL 0x00000008 /* Desc In End-of-List */
++#define AR2315_PCI_RXINT 0x00000010 /* Desc Out Completed */
++#define AR2315_PCI_RXOK 0x00000020 /* Desc Out OK */
++#define AR2315_PCI_RXERR 0x00000040 /* Desc Out ERR */
++#define AR2315_PCI_RXEOL 0x00000080 /* Desc Out EOL */
++#define AR2315_PCI_TXOOD 0x00000200 /* Desc In Out-of-Desc */
++#define AR2315_PCI_MASK 0x0000FFFF /* Desc Mask */
++#define AR2315_PCI_EXT_INT 0x02000000
++#define AR2315_PCI_ABORT_INT 0x04000000
++
++#define AR2315_PCI_INT_MASK (AR2315_PCI + 0x0504) /* same as INT_STATUS */
++
++#define AR2315_PCI_INTEN_REG (AR2315_PCI + 0x0508)
++#define AR2315_PCI_INT_DISABLE 0x00 /* disable pci interrupts */
++#define AR2315_PCI_INT_ENABLE 0x01 /* enable pci interrupts */
++
++#define AR2315_PCI_HOST_IN_EN (AR2315_PCI + 0x0800)
++#define AR2315_PCI_HOST_IN_DIS (AR2315_PCI + 0x0804)
++#define AR2315_PCI_HOST_IN_PTR (AR2315_PCI + 0x0810)
++#define AR2315_PCI_HOST_OUT_EN (AR2315_PCI + 0x0900)
++#define AR2315_PCI_HOST_OUT_DIS (AR2315_PCI + 0x0904)
++#define AR2315_PCI_HOST_OUT_PTR (AR2315_PCI + 0x0908)
++
++
++/*
++ * Local Bus Interface Registers
++ */
++#define AR2315_LB_CONFIG (AR2315_LOCAL + 0x0000)
++#define AR2315_LBCONF_OE 0x00000001 /* =1 OE is low-true */
++#define AR2315_LBCONF_CS0 0x00000002 /* =1 first CS is low-true */
++#define AR2315_LBCONF_CS1 0x00000004 /* =1 2nd CS is low-true */
++#define AR2315_LBCONF_RDY 0x00000008 /* =1 RDY is low-true */
++#define AR2315_LBCONF_WE 0x00000010 /* =1 Write En is low-true */
++#define AR2315_LBCONF_WAIT 0x00000020 /* =1 WAIT is low-true */
++#define AR2315_LBCONF_ADS 0x00000040 /* =1 Adr Strobe is low-true */
++#define AR2315_LBCONF_MOT 0x00000080 /* =0 Intel, =1 Motorola */
++#define AR2315_LBCONF_8CS 0x00000100 /* =1 8 bits CS, 0= 16bits */
++#define AR2315_LBCONF_8DS 0x00000200 /* =1 8 bits Data S, 0=16bits */
++#define AR2315_LBCONF_ADS_EN 0x00000400 /* =1 Enable ADS */
++#define AR2315_LBCONF_ADR_OE 0x00000800 /* =1 Adr cap on OE, WE or DS */
++#define AR2315_LBCONF_ADDT_MUX 0x00001000 /* =1 Adr and Data share bus */
++#define AR2315_LBCONF_DATA_OE 0x00002000 /* =1 Data cap on OE, WE, DS */
++#define AR2315_LBCONF_16DATA 0x00004000 /* =1 Data is 16 bits wide */
++#define AR2315_LBCONF_SWAPDT 0x00008000 /* =1 Byte swap data */
++#define AR2315_LBCONF_SYNC 0x00010000 /* =1 Bus synchronous to clk */
++#define AR2315_LBCONF_INT 0x00020000 /* =1 Intr is low true */
++#define AR2315_LBCONF_INT_CTR0 0x00000000 /* GND high-Z, Vdd is high-Z */
++#define AR2315_LBCONF_INT_CTR1 0x00040000 /* GND drive, Vdd is high-Z */
++#define AR2315_LBCONF_INT_CTR2 0x00080000 /* GND high-Z, Vdd drive */
++#define AR2315_LBCONF_INT_CTR3 0x000C0000 /* GND drive, Vdd drive */
++#define AR2315_LBCONF_RDY_WAIT 0x00100000 /* =1 RDY is negative of WAIT */
++#define AR2315_LBCONF_INT_PULSE 0x00200000 /* =1 Interrupt is a pulse */
++#define AR2315_LBCONF_ENABLE 0x00400000 /* =1 Falcon respond to LB */
++
++#define AR2315_LB_CLKSEL (AR2315_LOCAL + 0x0004)
++#define AR2315_LBCLK_EXT 0x0001 /* use external clk for lb */
++
++#define AR2315_LB_1MS (AR2315_LOCAL + 0x0008)
++#define AR2315_LB1MS_MASK 0x3FFFF /* # of AHB clk cycles in 1ms */
++
++#define AR2315_LB_MISCCFG (AR2315_LOCAL + 0x000C)
++#define AR2315_LBM_TXD_EN 0x00000001 /* Enable TXD for fragments */
++#define AR2315_LBM_RX_INTEN 0x00000002 /* Enable LB ints on RX ready */
++#define AR2315_LBM_MBOXWR_INTEN 0x00000004 /* Enable LB ints on mbox wr */
++#define AR2315_LBM_MBOXRD_INTEN 0x00000008 /* Enable LB ints on mbox rd */
++#define AR2315_LMB_DESCSWAP_EN 0x00000010 /* Byte swap desc enable */
++#define AR2315_LBM_TIMEOUT_MASK 0x00FFFF80
++#define AR2315_LBM_TIMEOUT_SHFT 7
++#define AR2315_LBM_PORTMUX 0x07000000
++
++
++#define AR2315_LB_RXTSOFF (AR2315_LOCAL + 0x0010)
++
++#define AR2315_LB_TX_CHAIN_EN (AR2315_LOCAL + 0x0100)
++#define AR2315_LB_TXEN_0 0x01
++#define AR2315_LB_TXEN_1 0x02
++#define AR2315_LB_TXEN_2 0x04
++#define AR2315_LB_TXEN_3 0x08
++
++#define AR2315_LB_TX_CHAIN_DIS (AR2315_LOCAL + 0x0104)
++#define AR2315_LB_TX_DESC_PTR (AR2315_LOCAL + 0x0200)
++
++#define AR2315_LB_RX_CHAIN_EN (AR2315_LOCAL + 0x0400)
++#define AR2315_LB_RXEN 0x01
++
++#define AR2315_LB_RX_CHAIN_DIS (AR2315_LOCAL + 0x0404)
++#define AR2315_LB_RX_DESC_PTR (AR2315_LOCAL + 0x0408)
++
++#define AR2315_LB_INT_STATUS (AR2315_LOCAL + 0x0500)
++#define AR2315_INT_TX_DESC 0x0001
++#define AR2315_INT_TX_OK 0x0002
++#define AR2315_INT_TX_ERR 0x0004
++#define AR2315_INT_TX_EOF 0x0008
++#define AR2315_INT_RX_DESC 0x0010
++#define AR2315_INT_RX_OK 0x0020
++#define AR2315_INT_RX_ERR 0x0040
++#define AR2315_INT_RX_EOF 0x0080
++#define AR2315_INT_TX_TRUNC 0x0100
++#define AR2315_INT_TX_STARVE 0x0200
++#define AR2315_INT_LB_TIMEOUT 0x0400
++#define AR2315_INT_LB_ERR 0x0800
++#define AR2315_INT_MBOX_WR 0x1000
++#define AR2315_INT_MBOX_RD 0x2000
++
++/* Bit definitions for INT MASK are the same as INT_STATUS */
++#define AR2315_LB_INT_MASK (AR2315_LOCAL + 0x0504)
++
++#define AR2315_LB_INT_EN (AR2315_LOCAL + 0x0508)
++#define AR2315_LB_MBOX (AR2315_LOCAL + 0x0600)
++
++/*
++ * IR Interface Registers
++ */
++#define AR2315_IR_PKTDATA (AR2315_IR + 0x0000)
++
++#define AR2315_IR_PKTLEN (AR2315_IR + 0x07fc) /* 0 - 63 */
++
++#define AR2315_IR_CONTROL (AR2315_IR + 0x0800)
++#define AR2315_IRCTL_TX 0x00000000 /* use as tranmitter */
++#define AR2315_IRCTL_RX 0x00000001 /* use as receiver */
++#define AR2315_IRCTL_SAMPLECLK_MASK 0x00003ffe /* Sample clk divisor mask */
++#define AR2315_IRCTL_SAMPLECLK_SHFT 1
++#define AR2315_IRCTL_OUTPUTCLK_MASK 0x03ffc000 /* Output clk divisor mask */
++#define AR2315_IRCTL_OUTPUTCLK_SHFT 14
++
++#define AR2315_IR_STATUS (AR2315_IR + 0x0804)
++#define AR2315_IRSTS_RX 0x00000001 /* receive in progress */
++#define AR2315_IRSTS_TX 0x00000002 /* transmit in progress */
++
++#define AR2315_IR_CONFIG (AR2315_IR + 0x0808)
++#define AR2315_IRCFG_INVIN 0x00000001 /* invert input polarity */
++#define AR2315_IRCFG_INVOUT 0x00000002 /* invert output polarity */
++#define AR2315_IRCFG_SEQ_START_WIN_SEL 0x00000004 /* 1 => 28, 0 => 7 */
++#define AR2315_IRCFG_SEQ_START_THRESH 0x000000f0 /* */
++#define AR2315_IRCFG_SEQ_END_UNIT_SEL 0x00000100 /* */
++#define AR2315_IRCFG_SEQ_END_UNIT_THRESH 0x00007e00 /* */
++#define AR2315_IRCFG_SEQ_END_WIN_SEL 0x00008000 /* */
++#define AR2315_IRCFG_SEQ_END_WIN_THRESH 0x001f0000 /* */
++#define AR2315_IRCFG_NUM_BACKOFF_WORDS 0x01e00000 /* */
++
++#define HOST_PCI_DEV_ID 3
++#define HOST_PCI_MBAR0 0x10000000
++#define HOST_PCI_MBAR1 0x20000000
++#define HOST_PCI_MBAR2 0x30000000
++
++#define HOST_PCI_SDRAM_BASEADDR HOST_PCI_MBAR1
++#define PCI_DEVICE_MEM_SPACE 0x800000
++
++#endif /* __AR2315_REG_H */
+--- /dev/null
++++ b/arch/mips/include/asm/mach-ar231x/ar5312_regs.h
+@@ -0,0 +1,236 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License. See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
++ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
++ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
++ */
++
++#ifndef AR5312_H
++#define AR5312_H
++
++#include <asm/addrspace.h>
++
++/*
++ * IRQs
++ */
++
++#define AR5312_IRQ_WLAN0_INTRS MIPS_CPU_IRQ_BASE+2 /* C0_CAUSE: 0x0400 */
++#define AR5312_IRQ_ENET0_INTRS MIPS_CPU_IRQ_BASE+3 /* C0_CAUSE: 0x0800 */
++#define AR5312_IRQ_ENET1_INTRS MIPS_CPU_IRQ_BASE+4 /* C0_CAUSE: 0x1000 */
++#define AR5312_IRQ_WLAN1_INTRS MIPS_CPU_IRQ_BASE+5 /* C0_CAUSE: 0x2000 */
++#define AR5312_IRQ_MISC_INTRS MIPS_CPU_IRQ_BASE+6 /* C0_CAUSE: 0x4000 */
++
++
++/* Address Map */
++#define AR531X_WLAN0 0x18000000
++#define AR531X_WLAN1 0x18500000
++#define AR531X_ENET0 0x18100000
++#define AR531X_ENET1 0x18200000
++#define AR531X_SDRAMCTL 0x18300000
++#define AR531X_FLASHCTL 0x18400000
++#define AR531X_APBBASE 0x1c000000
++#define AR531X_FLASH 0x1e000000
++#define AR531X_UART0 0xbc000003 /* UART MMR */
++
++/*
++ * AR531X_NUM_ENET_MAC defines the number of ethernet MACs that
++ * should be considered available. The AR5312 supports 2 enet MACS,
++ * even though many reference boards only actually use 1 of them
++ * (i.e. Only MAC 0 is actually connected to an enet PHY or PHY switch.
++ * The AR2312 supports 1 enet MAC.
++ */
++#define AR531X_NUM_ENET_MAC 2
++
++/*
++ * Need these defines to determine true number of ethernet MACs
++ */
++#define AR5212_AR5312_REV2 0x0052 /* AR5312 WMAC (AP31) */
++#define AR5212_AR5312_REV7 0x0057 /* AR5312 WMAC (AP30-040) */
++#define AR5212_AR2313_REV8 0x0058 /* AR2313 WMAC (AP43-030) */
++#define AR531X_RADIO_MASK_OFF 0xc8
++#define AR531X_RADIO0_MASK 0x0003
++#define AR531X_RADIO1_MASK 0x000c
++#define AR531X_RADIO1_S 2
++
++/*
++ * AR531X_NUM_WMAC defines the number of Wireless MACs that\
++ * should be considered available.
++ */
++#define AR531X_NUM_WMAC 2
++
++/* Reset/Timer Block Address Map */
++#define AR531X_RESETTMR (AR531X_APBBASE + 0x3000)
++#define AR531X_TIMER (AR531X_RESETTMR + 0x0000) /* countdown timer */
++#define AR531X_WD_CTRL (AR531X_RESETTMR + 0x0008) /* watchdog cntrl */
++#define AR531X_WD_TIMER (AR531X_RESETTMR + 0x000c) /* watchdog timer */
++#define AR531X_ISR (AR531X_RESETTMR + 0x0010) /* Intr Status Reg */
++#define AR531X_IMR (AR531X_RESETTMR + 0x0014) /* Intr Mask Reg */
++#define AR531X_RESET (AR531X_RESETTMR + 0x0020)
++#define AR5312_CLOCKCTL1 (AR531X_RESETTMR + 0x0064)
++#define AR5312_SCRATCH (AR531X_RESETTMR + 0x006c)
++#define AR531X_PROCADDR (AR531X_RESETTMR + 0x0070)
++#define AR531X_PROC1 (AR531X_RESETTMR + 0x0074)
++#define AR531X_DMAADDR (AR531X_RESETTMR + 0x0078)
++#define AR531X_DMA1 (AR531X_RESETTMR + 0x007c)
++#define AR531X_ENABLE (AR531X_RESETTMR + 0x0080) /* interface enb */
++#define AR531X_REV (AR531X_RESETTMR + 0x0090) /* revision */
++
++/* AR531X_WD_CTRL register bit field definitions */
++#define AR531X_WD_CTRL_IGNORE_EXPIRATION 0x0000
++#define AR531X_WD_CTRL_NMI 0x0001
++#define AR531X_WD_CTRL_RESET 0x0002
++
++/* AR531X_ISR register bit field definitions */
++#define AR531X_ISR_NONE 0x0000
++#define AR531X_ISR_TIMER 0x0001
++#define AR531X_ISR_AHBPROC 0x0002
++#define AR531X_ISR_AHBDMA 0x0004
++#define AR531X_ISR_GPIO 0x0008
++#define AR531X_ISR_UART0 0x0010
++#define AR531X_ISR_UART0DMA 0x0020
++#define AR531X_ISR_WD 0x0040
++#define AR531X_ISR_LOCAL 0x0080
++
++/* AR531X_RESET register bit field definitions */
++#define AR531X_RESET_SYSTEM 0x00000001 /* cold reset full system */
++#define AR531X_RESET_PROC 0x00000002 /* cold reset MIPS core */
++#define AR531X_RESET_WLAN0 0x00000004 /* cold reset WLAN MAC and BB */
++#define AR531X_RESET_EPHY0 0x00000008 /* cold reset ENET0 phy */
++#define AR531X_RESET_EPHY1 0x00000010 /* cold reset ENET1 phy */
++#define AR531X_RESET_ENET0 0x00000020 /* cold reset ENET0 mac */
++#define AR531X_RESET_ENET1 0x00000040 /* cold reset ENET1 mac */
++#define AR531X_RESET_UART0 0x00000100 /* cold reset UART0 (high speed) */
++#define AR531X_RESET_WLAN1 0x00000200 /* cold reset WLAN MAC/BB */
++#define AR531X_RESET_APB 0x00000400 /* cold reset APB (ar5312) */
++#define AR531X_RESET_WARM_PROC 0x00001000 /* warm reset MIPS core */
++#define AR531X_RESET_WARM_WLAN0_MAC 0x00002000 /* warm reset WLAN0 MAC */
++#define AR531X_RESET_WARM_WLAN0_BB 0x00004000 /* warm reset WLAN0 BaseBand */
++#define AR531X_RESET_NMI 0x00010000 /* send an NMI to the processor */
++#define AR531X_RESET_WARM_WLAN1_MAC 0x00020000 /* warm reset WLAN1 mac */
++#define AR531X_RESET_WARM_WLAN1_BB 0x00040000 /* warm reset WLAN1 baseband */
++#define AR531X_RESET_LOCAL_BUS 0x00080000 /* reset local bus */
++#define AR531X_RESET_WDOG 0x00100000 /* last reset was a watchdog */
++
++#define AR531X_RESET_WMAC0_BITS \
++ AR531X_RESET_WLAN0 |\
++ AR531X_RESET_WARM_WLAN0_MAC |\
++ AR531X_RESET_WARM_WLAN0_BB
++
++#define AR531X_RESERT_WMAC1_BITS \
++ AR531X_RESET_WLAN1 |\
++ AR531X_RESET_WARM_WLAN1_MAC |\
++ AR531X_RESET_WARM_WLAN1_BB
++
++/* AR5312_CLOCKCTL1 register bit field definitions */
++#define AR5312_CLOCKCTL1_PREDIVIDE_MASK 0x00000030
++#define AR5312_CLOCKCTL1_PREDIVIDE_SHIFT 4
++#define AR5312_CLOCKCTL1_MULTIPLIER_MASK 0x00001f00
++#define AR5312_CLOCKCTL1_MULTIPLIER_SHIFT 8
++#define AR5312_CLOCKCTL1_DOUBLER_MASK 0x00010000
++
++/* Valid for AR5312 and AR2312 */
++#define AR5312_CLOCKCTL1_PREDIVIDE_MASK 0x00000030
++#define AR5312_CLOCKCTL1_PREDIVIDE_SHIFT 4
++#define AR5312_CLOCKCTL1_MULTIPLIER_MASK 0x00001f00
++#define AR5312_CLOCKCTL1_MULTIPLIER_SHIFT 8
++#define AR5312_CLOCKCTL1_DOUBLER_MASK 0x00010000
++
++/* Valid for AR2313 */
++#define AR2313_CLOCKCTL1_PREDIVIDE_MASK 0x00003000
++#define AR2313_CLOCKCTL1_PREDIVIDE_SHIFT 12
++#define AR2313_CLOCKCTL1_MULTIPLIER_MASK 0x001f0000
++#define AR2313_CLOCKCTL1_MULTIPLIER_SHIFT 16
++#define AR2313_CLOCKCTL1_DOUBLER_MASK 0x00000000
++
++
++/* AR531X_ENABLE register bit field definitions */
++#define AR531X_ENABLE_WLAN0 0x0001
++#define AR531X_ENABLE_ENET0 0x0002
++#define AR531X_ENABLE_ENET1 0x0004
++#define AR531X_ENABLE_UART_AND_WLAN1_PIO 0x0008 /* UART, and WLAN1 PIOs */
++#define AR531X_ENABLE_WLAN1_DMA 0x0010 /* WLAN1 DMAs */
++#define AR531X_ENABLE_WLAN1 \
++ (AR531X_ENABLE_UART_AND_WLAN1_PIO | AR531X_ENABLE_WLAN1_DMA)
++
++/* AR531X_REV register bit field definitions */
++#define AR531X_REV_WMAC_MAJ 0xf000
++#define AR531X_REV_WMAC_MAJ_S 12
++#define AR531X_REV_WMAC_MIN 0x0f00
++#define AR531X_REV_WMAC_MIN_S 8
++#define AR531X_REV_MAJ 0x00f0
++#define AR531X_REV_MAJ_S 4
++#define AR531X_REV_MIN 0x000f
++#define AR531X_REV_MIN_S 0
++#define AR531X_REV_CHIP (AR531X_REV_MAJ|AR531X_REV_MIN)
++
++/* Major revision numbers, bits 7..4 of Revision ID register */
++#define AR531X_REV_MAJ_AR5312 0x4
++#define AR531X_REV_MAJ_AR2313 0x5
++
++/* Minor revision numbers, bits 3..0 of Revision ID register */
++#define AR5312_REV_MIN_DUAL 0x0 /* Dual WLAN version */
++#define AR5312_REV_MIN_SINGLE 0x1 /* Single WLAN version */
++
++/* AR531X_FLASHCTL register bit field definitions */
++#define FLASHCTL_IDCY 0x0000000f /* Idle cycle turn around time */
++#define FLASHCTL_IDCY_S 0
++#define FLASHCTL_WST1 0x000003e0 /* Wait state 1 */
++#define FLASHCTL_WST1_S 5
++#define FLASHCTL_RBLE 0x00000400 /* Read byte lane enable */
++#define FLASHCTL_WST2 0x0000f800 /* Wait state 2 */
++#define FLASHCTL_WST2_S 11
++#define FLASHCTL_AC 0x00070000 /* Flash address check (added) */
++#define FLASHCTL_AC_S 16
++#define FLASHCTL_AC_128K 0x00000000
++#define FLASHCTL_AC_256K 0x00010000
++#define FLASHCTL_AC_512K 0x00020000
++#define FLASHCTL_AC_1M 0x00030000
++#define FLASHCTL_AC_2M 0x00040000
++#define FLASHCTL_AC_4M 0x00050000
++#define FLASHCTL_AC_8M 0x00060000
++#define FLASHCTL_AC_RES 0x00070000 /* 16MB is not supported */
++#define FLASHCTL_E 0x00080000 /* Flash bank enable (added) */
++#define FLASHCTL_BUSERR 0x01000000 /* Bus transfer error status flag */
++#define FLASHCTL_WPERR 0x02000000 /* Write protect error status flag */
++#define FLASHCTL_WP 0x04000000 /* Write protect */
++#define FLASHCTL_BM 0x08000000 /* Burst mode */
++#define FLASHCTL_MW 0x30000000 /* Memory width */
++#define FLASHCTL_MWx8 0x00000000 /* Memory width x8 */
++#define FLASHCTL_MWx16 0x10000000 /* Memory width x16 */
++#define FLASHCTL_MWx32 0x20000000 /* Memory width x32 (not supported) */
++#define FLASHCTL_ATNR 0x00000000 /* Access type == no retry */
++#define FLASHCTL_ATR 0x80000000 /* Access type == retry every */
++#define FLASHCTL_ATR4 0xc0000000 /* Access type == retry every 4 */
++
++/* ARM Flash Controller -- 3 flash banks with either x8 or x16 devices. */
++#define AR531X_FLASHCTL0 (AR531X_FLASHCTL + 0x00)
++#define AR531X_FLASHCTL1 (AR531X_FLASHCTL + 0x04)
++#define AR531X_FLASHCTL2 (AR531X_FLASHCTL + 0x08)
++
++/* ARM SDRAM Controller -- just enough to determine memory size */
++#define AR531X_MEM_CFG1 (AR531X_SDRAMCTL + 0x04)
++#define MEM_CFG1_AC0 0x00000700 /* bank 0: SDRAM addr check (added) */
++#define MEM_CFG1_AC0_S 8
++#define MEM_CFG1_AC1 0x00007000 /* bank 1: SDRAM addr check (added) */
++#define MEM_CFG1_AC1_S 12
++
++/* GPIO Address Map */
++#define AR531X_GPIO (AR531X_APBBASE + 0x2000)
++#define AR531X_GPIO_DO (AR531X_GPIO + 0x00) /* output register */
++#define AR531X_GPIO_DI (AR531X_GPIO + 0x04) /* intput register */
++#define AR531X_GPIO_CR (AR531X_GPIO + 0x08) /* control register */
++
++/* GPIO Control Register bit field definitions */
++#define AR531X_GPIO_CR_M(x) (1 << (x)) /* mask for i/o */
++#define AR531X_GPIO_CR_O(x) (0 << (x)) /* mask for output */
++#define AR531X_GPIO_CR_I(x) (1 << (x)) /* mask for input */
++#define AR531X_GPIO_CR_INT(x) (1 << ((x)+8)) /* mask for interrupt */
++#define AR531X_GPIO_CR_UART(x) (1 << ((x)+16)) /* uart multiplex */
++#define AR531X_NUM_GPIO 8
++
++
++#endif
++
+--- /dev/null
++++ b/arch/mips/ar231x/ar5312.c
+@@ -0,0 +1,549 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License. See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
++ * Copyright (C) 2006 FON Technology, SL.
++ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
++ * Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org>
++ */
++
++/*
++ * Platform devices for Atheros SoCs
++ */
++
++#include <generated/autoconf.h>
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/types.h>
++#include <linux/string.h>
++#include <linux/mtd/physmap.h>
++#include <linux/platform_device.h>
++#include <linux/kernel.h>
++#include <linux/reboot.h>
++#include <linux/leds.h>
++#include <asm/bootinfo.h>
++#include <asm/reboot.h>
++#include <asm/time.h>
++#include <asm/irq.h>
++#include <asm/io.h>
++#include <gpio.h>
++
++#include <ar231x_platform.h>
++#include <ar5312_regs.h>
++#include <ar231x.h>
++#include "devices.h"
++#include "ar5312.h"
++
++static void
++ar5312_misc_irq_dispatch(void)
++{
++ unsigned int ar231x_misc_intrs = ar231x_read_reg(AR531X_ISR) & ar231x_read_reg(AR531X_IMR);
++
++ if (ar231x_misc_intrs & AR531X_ISR_TIMER) {
++ do_IRQ(AR531X_MISC_IRQ_TIMER);
++ (void)ar231x_read_reg(AR531X_TIMER);
++ } else if (ar231x_misc_intrs & AR531X_ISR_AHBPROC)
++ do_IRQ(AR531X_MISC_IRQ_AHB_PROC);
++ else if ((ar231x_misc_intrs & AR531X_ISR_UART0))
++ do_IRQ(AR531X_MISC_IRQ_UART0);
++ else if (ar231x_misc_intrs & AR531X_ISR_WD)
++ do_IRQ(AR531X_MISC_IRQ_WATCHDOG);
++ else
++ do_IRQ(AR531X_MISC_IRQ_NONE);
++}
++
++static asmlinkage void
++ar5312_irq_dispatch(void)
++{
++ int pending = read_c0_status() & read_c0_cause();
++
++ if (pending & CAUSEF_IP2)
++ do_IRQ(AR5312_IRQ_WLAN0_INTRS);
++ else if (pending & CAUSEF_IP3)
++ do_IRQ(AR5312_IRQ_ENET0_INTRS);
++ else if (pending & CAUSEF_IP4)
++ do_IRQ(AR5312_IRQ_ENET1_INTRS);
++ else if (pending & CAUSEF_IP5)
++ do_IRQ(AR5312_IRQ_WLAN1_INTRS);
++ else if (pending & CAUSEF_IP6)
++ ar5312_misc_irq_dispatch();
++ else if (pending & CAUSEF_IP7)
++ do_IRQ(AR531X_IRQ_CPU_CLOCK);
++}
++
++
++/* Enable the specified AR531X_MISC_IRQ interrupt */
++static void
++ar5312_misc_intr_enable(unsigned int irq)
++{
++ unsigned int imr;
++
++ imr = ar231x_read_reg(AR531X_IMR);
++ imr |= (1 << (irq - AR531X_MISC_IRQ_BASE - 1));
++ ar231x_write_reg(AR531X_IMR, imr);
++}
++
++/* Disable the specified AR531X_MISC_IRQ interrupt */
++static void
++ar5312_misc_intr_disable(unsigned int irq)
++{
++ unsigned int imr;
++
++ imr = ar231x_read_reg(AR531X_IMR);
++ imr &= ~(1 << (irq - AR531X_MISC_IRQ_BASE - 1));
++ ar231x_write_reg(AR531X_IMR, imr);
++ ar231x_read_reg(AR531X_IMR); /* flush write buffer */
++}
++
++static void
++ar5312_misc_intr_end(unsigned int irq)
++{
++ if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
++ ar5312_misc_intr_enable(irq);
++}
++
++static struct irq_chip ar5312_misc_intr_controller = {
++ .name = "AR5312-MISC",
++ .disable = ar5312_misc_intr_disable,
++ .ack = ar5312_misc_intr_disable,
++ .mask_ack = ar5312_misc_intr_disable,
++ .mask = ar5312_misc_intr_disable,
++ .unmask = ar5312_misc_intr_enable,
++ .end = ar5312_misc_intr_end,
++};
++
++
++static irqreturn_t ar5312_ahb_proc_handler(int cpl, void *dev_id)
++{
++ u32 proc1 = ar231x_read_reg(AR531X_PROC1);
++ u32 procAddr = ar231x_read_reg(AR531X_PROCADDR); /* clears error state */
++ u32 dma1 = ar231x_read_reg(AR531X_DMA1);
++ u32 dmaAddr = ar231x_read_reg(AR531X_DMAADDR); /* clears error state */
++
++ printk("AHB interrupt: PROCADDR=0x%8.8x PROC1=0x%8.8x DMAADDR=0x%8.8x DMA1=0x%8.8x\n",
++ procAddr, proc1, dmaAddr, dma1);
++
++ machine_restart("AHB error"); /* Catastrophic failure */
++ return IRQ_HANDLED;
++}
++
++
++static struct irqaction ar5312_ahb_proc_interrupt = {
++ .handler = ar5312_ahb_proc_handler,
++ .flags = IRQF_DISABLED,
++ .name = "ar5312_ahb_proc_interrupt",
++};
++
++
++static struct irqaction cascade = {
++ .handler = no_action,
++ .flags = IRQF_DISABLED,
++ .name = "cascade",
++};
++
++void __init ar5312_irq_init(void)
++{
++ int i;
++
++ if (!is_5312())
++ return;
++
++ ar231x_irq_dispatch = ar5312_irq_dispatch;
++ for (i = 0; i < AR531X_MISC_IRQ_COUNT; i++) {
++ int irq = AR531X_MISC_IRQ_BASE + i;
++ set_irq_chip_and_handler(irq, &ar5312_misc_intr_controller,
++ handle_level_irq);
++ }
++ setup_irq(AR531X_MISC_IRQ_AHB_PROC, &ar5312_ahb_proc_interrupt);
++ setup_irq(AR5312_IRQ_MISC_INTRS, &cascade);
++}
++
++const struct ar231x_gpiodev ar5312_gpiodev;
++
++static u32
++ar5312_gpio_get_output(void)
++{
++ u32 reg;
++ reg = ~(ar231x_read_reg(AR531X_GPIO_CR));
++ reg &= ar5312_gpiodev.valid_mask;
++ return reg;
++}
++
++static u32
++ar5312_gpio_set_output(u32 mask, u32 val)
++{
++ u32 reg;
++
++ reg = ar231x_read_reg(AR531X_GPIO_CR);
++ reg |= mask;
++ reg &= ~val;
++ ar231x_write_reg(AR531X_GPIO_CR, reg);
++ return reg;
++}
++
++static u32
++ar5312_gpio_get(void)
++{
++ u32 reg;
++ reg = ar231x_read_reg(AR531X_GPIO_DI);
++ reg &= ar5312_gpiodev.valid_mask;
++ return reg;
++}
++
++static u32
++ar5312_gpio_set(u32 mask, u32 value)
++{
++ u32 reg;
++ reg = ar231x_read_reg(AR531X_GPIO_DO);
++ reg &= ~mask;
++ reg |= value;
++ ar231x_write_reg(AR531X_GPIO_DO, reg);
++ return reg;
++}
++
++const struct ar231x_gpiodev ar5312_gpiodev = {
++ .valid_mask = (1 << 8) - 1,
++ .get_output = ar5312_gpio_get_output,
++ .set_output = ar5312_gpio_set_output,
++ .get = ar5312_gpio_get,
++ .set = ar5312_gpio_set,
++};
++
++static struct physmap_flash_data ar5312_flash_data = {
++ .width = 2,
++};
++
++static struct resource ar5312_flash_resource = {
++ .start = AR531X_FLASH,
++ .end = AR531X_FLASH + 0x800000 - 1,
++ .flags = IORESOURCE_MEM,
++};
++
++static struct ar231x_eth ar5312_eth0_data = {
++ .reset_base = AR531X_RESET,
++ .reset_mac = AR531X_RESET_ENET0,
++ .reset_phy = AR531X_RESET_EPHY0,
++ .phy_base = KSEG1ADDR(AR531X_ENET0),
++ .config = &ar231x_board,
++};
++
++static struct ar231x_eth ar5312_eth1_data = {
++ .reset_base = AR531X_RESET,
++ .reset_mac = AR531X_RESET_ENET1,
++ .reset_phy = AR531X_RESET_EPHY1,
++ .phy_base = KSEG1ADDR(AR531X_ENET1),
++ .config = &ar231x_board,
++};
++
++static struct platform_device ar5312_physmap_flash = {
++ .name = "physmap-flash",
++ .id = 0,
++ .dev.platform_data = &ar5312_flash_data,
++ .resource = &ar5312_flash_resource,
++ .num_resources = 1,
++};
++
++#ifdef CONFIG_LEDS_GPIO
++static struct gpio_led ar5312_leds[] = {
++ { .name = "wlan", .gpio = 0, .active_low = 1, },
++};
++
++static const struct gpio_led_platform_data ar5312_led_data = {
++ .num_leds = ARRAY_SIZE(ar5312_leds),
++ .leds = (void *) ar5312_leds,
++};
++
++static struct platform_device ar5312_gpio_leds = {
++ .name = "leds-gpio",
++ .id = -1,
++ .dev.platform_data = (void *) &ar5312_led_data,
++};
++#endif
++
++/*
++ * NB: This mapping size is larger than the actual flash size,
++ * but this shouldn't be a problem here, because the flash
++ * will simply be mapped multiple times.
++ */
++static char __init *ar5312_flash_limit(void)
++{
++ u32 ctl;
++ /*
++ * Configure flash bank 0.
++ * Assume 8M window size. Flash will be aliased if it's smaller
++ */
++ ctl = FLASHCTL_E |
++ FLASHCTL_AC_8M |
++ FLASHCTL_RBLE |
++ (0x01 << FLASHCTL_IDCY_S) |
++ (0x07 << FLASHCTL_WST1_S) |
++ (0x07 << FLASHCTL_WST2_S) |
++ (ar231x_read_reg(AR531X_FLASHCTL0) & FLASHCTL_MW);
++
++ ar231x_write_reg(AR531X_FLASHCTL0, ctl);
++
++ /* Disable other flash banks */
++ ar231x_write_reg(AR531X_FLASHCTL1,
++ ar231x_read_reg(AR531X_FLASHCTL1) & ~(FLASHCTL_E | FLASHCTL_AC));
++
++ ar231x_write_reg(AR531X_FLASHCTL2,
++ ar231x_read_reg(AR531X_FLASHCTL2) & ~(FLASHCTL_E | FLASHCTL_AC));
++
++ return (char *) KSEG1ADDR(AR531X_FLASH + 0x800000);
++}
++
++int __init ar5312_init_devices(void)
++{
++ struct ar231x_boarddata *config;
++ u32 fctl = 0;
++ const u8 *radio;
++ u8 *c;
++
++ if (!is_5312())
++ return 0;
++
++ /* Locate board/radio config data */
++ ar231x_find_config(ar5312_flash_limit());
++ config = ar231x_board.config;
++
++
++ /*
++ * Chip IDs and hardware detection for some Atheros
++ * models are really broken!
++ *
++ * Atheros uses a disabled WMAC0 and Silicon ID of AR5312
++ * as indication for AR2312, which is otherwise
++ * indistinguishable from the real AR5312.
++ */
++ if (ar231x_board.radio) {
++ radio = ar231x_board.radio + AR531X_RADIO_MASK_OFF;
++ if ((*((const u32 *) radio) & AR531X_RADIO0_MASK) == 0)
++ config->flags |= BD_ISCASPER;
++ } else
++ radio = NULL;
++
++ /* AR2313 has CPU minor rev. 10 */
++ if ((current_cpu_data.processor_id & 0xff) == 0x0a)
++ ar231x_devtype = DEV_TYPE_AR2313;
++
++ /* AR2312 shares the same Silicon ID as AR5312 */
++ else if (config->flags & BD_ISCASPER)
++ ar231x_devtype = DEV_TYPE_AR2312;
++
++ /* Everything else is probably AR5312 or compatible */
++ else
++ ar231x_devtype = DEV_TYPE_AR5312;
++
++ /* fixup flash width */
++ fctl = ar231x_read_reg(AR531X_FLASHCTL) & FLASHCTL_MW;
++ switch (fctl) {
++ case FLASHCTL_MWx16:
++ ar5312_flash_data.width = 2;
++ break;
++ case FLASHCTL_MWx8:
++ default:
++ ar5312_flash_data.width = 1;
++ break;
++ }
++
++ platform_device_register(&ar5312_physmap_flash);
++
++#ifdef CONFIG_LEDS_GPIO
++ ar5312_leds[0].gpio = config->sysLedGpio;
++ platform_device_register(&ar5312_gpio_leds);
++#endif
++
++ /* Fix up MAC addresses if necessary */
++ if (!memcmp(config->enet0_mac, "\xff\xff\xff\xff\xff\xff", 6))
++ memcpy(config->enet0_mac, config->enet1_mac, 6);
++
++ /* If ENET0 and ENET1 have the same mac address,
++ * increment the one from ENET1 */
++ if (memcmp(config->enet0_mac, config->enet1_mac, 6) == 0) {
++ c = config->enet1_mac + 5;
++ while ((c >= config->enet1_mac) && !(++(*c)))
++ c--;
++ }
++
++ switch(ar231x_devtype) {
++ case DEV_TYPE_AR5312:
++ ar5312_eth0_data.macaddr = config->enet0_mac;
++ ar231x_add_ethernet(0, KSEG1ADDR(AR531X_ENET0),
++ AR5312_IRQ_ENET0_INTRS, &ar5312_eth0_data);
++
++ ar5312_eth1_data.macaddr = config->enet1_mac;
++ ar231x_add_ethernet(1, KSEG1ADDR(AR531X_ENET1),
++ AR5312_IRQ_ENET1_INTRS, &ar5312_eth1_data);
++
++ if (!ar231x_board.radio)
++ return 0;
++
++ if ((*((u32 *) radio) & AR531X_RADIO0_MASK) &&
++ (config->flags & BD_WLAN0))
++ ar231x_add_wmac(0, AR531X_WLAN0,
++ AR5312_IRQ_WLAN0_INTRS);
++
++ break;
++ /*
++ * AR2312/3 ethernet uses the PHY of ENET0, but the MAC
++ * of ENET1. Atheros calls it 'twisted' for a reason :)
++ */
++ case DEV_TYPE_AR2312:
++ case DEV_TYPE_AR2313:
++ ar5312_eth1_data.phy_base = ar5312_eth0_data.phy_base;
++ ar5312_eth1_data.reset_phy = ar5312_eth0_data.reset_phy;
++ ar5312_eth1_data.macaddr = config->enet0_mac;
++ ar231x_add_ethernet(0, KSEG1ADDR(AR531X_ENET1),
++ AR5312_IRQ_ENET1_INTRS, &ar5312_eth1_data);
++
++ if (!ar231x_board.radio)
++ return 0;
++ break;
++ default:
++ break;
++ }
++
++ if ((*((u32 *) radio) & AR531X_RADIO1_MASK) &&
++ (config->flags & BD_WLAN1))
++ ar231x_add_wmac(1, AR531X_WLAN1,
++ AR5312_IRQ_WLAN1_INTRS);
++
++ return 0;
++}
++
++
++static void ar5312_restart(char *command)
++{
++ /* reset the system */
++ local_irq_disable();
++ while(1) {
++ ar231x_write_reg(AR531X_RESET, AR531X_RESET_SYSTEM);
++ }
++}
++
++
++/*
++ * This table is indexed by bits 5..4 of the CLOCKCTL1 register
++ * to determine the predevisor value.
++ */
++static int __initdata CLOCKCTL1_PREDIVIDE_TABLE[4] = { 1, 2, 4, 5 };
++
++
++static int __init
++ar5312_cpu_frequency(void)
++{
++ unsigned int result;
++ unsigned int predivide_mask, predivide_shift;
++ unsigned int multiplier_mask, multiplier_shift;
++ unsigned int clockCtl1, preDivideSelect, preDivisor, multiplier;
++ unsigned int doubler_mask;
++ u16 devid;
++
++ /* Trust the bootrom's idea of cpu frequency. */
++ if ((result = ar231x_read_reg(AR5312_SCRATCH)))
++ return result;
++
++ devid = ar231x_read_reg(AR531X_REV);
++ devid &= AR531X_REV_MAJ;
++ devid >>= AR531X_REV_MAJ_S;
++ if (devid == AR531X_REV_MAJ_AR2313) {
++ predivide_mask = AR2313_CLOCKCTL1_PREDIVIDE_MASK;
++ predivide_shift = AR2313_CLOCKCTL1_PREDIVIDE_SHIFT;
++ multiplier_mask = AR2313_CLOCKCTL1_MULTIPLIER_MASK;
++ multiplier_shift = AR2313_CLOCKCTL1_MULTIPLIER_SHIFT;
++ doubler_mask = AR2313_CLOCKCTL1_DOUBLER_MASK;
++ } else { /* AR5312 and AR2312 */
++ predivide_mask = AR5312_CLOCKCTL1_PREDIVIDE_MASK;
++ predivide_shift = AR5312_CLOCKCTL1_PREDIVIDE_SHIFT;
++ multiplier_mask = AR5312_CLOCKCTL1_MULTIPLIER_MASK;
++ multiplier_shift = AR5312_CLOCKCTL1_MULTIPLIER_SHIFT;
++ doubler_mask = AR5312_CLOCKCTL1_DOUBLER_MASK;
++ }
++
++ /*
++ * Clocking is derived from a fixed 40MHz input clock.
++ *
++ * cpuFreq = InputClock * MULT (where MULT is PLL multiplier)
++ * sysFreq = cpuFreq / 4 (used for APB clock, serial,
++ * flash, Timer, Watchdog Timer)
++ *
++ * cntFreq = cpuFreq / 2 (use for CPU count/compare)
++ *
++ * So, for example, with a PLL multiplier of 5, we have
++ *
++ * cpuFreq = 200MHz
++ * sysFreq = 50MHz
++ * cntFreq = 100MHz
++ *
++ * We compute the CPU frequency, based on PLL settings.
++ */
++
++ clockCtl1 = ar231x_read_reg(AR5312_CLOCKCTL1);
++ preDivideSelect = (clockCtl1 & predivide_mask) >> predivide_shift;
++ preDivisor = CLOCKCTL1_PREDIVIDE_TABLE[preDivideSelect];
++ multiplier = (clockCtl1 & multiplier_mask) >> multiplier_shift;
++
++ if (clockCtl1 & doubler_mask) {
++ multiplier = multiplier << 1;
++ }
++ return (40000000 / preDivisor) * multiplier;
++}
++
++static inline int
++ar5312_sys_frequency(void)
++{
++ return ar5312_cpu_frequency() / 4;
++}
++
++void __init
++ar5312_time_init(void)
++{
++ if (!is_5312())
++ return;
++
++ mips_hpt_frequency = ar5312_cpu_frequency() / 2;
++}
++
++
++void __init
++ar5312_prom_init(void)
++{
++ u32 memsize, memcfg, bank0AC, bank1AC;
++ u32 devid;
++
++ if (!is_5312())
++ return;
++
++ /* Detect memory size */
++ memcfg = ar231x_read_reg(AR531X_MEM_CFG1);
++ bank0AC = (memcfg & MEM_CFG1_AC0) >> MEM_CFG1_AC0_S;
++ bank1AC = (memcfg & MEM_CFG1_AC1) >> MEM_CFG1_AC1_S;
++ memsize = (bank0AC ? (1 << (bank0AC+1)) : 0)
++ + (bank1AC ? (1 << (bank1AC+1)) : 0);
++ memsize <<= 20;
++ add_memory_region(0, memsize, BOOT_MEM_RAM);
++
++ devid = ar231x_read_reg(AR531X_REV);
++ devid >>= AR531X_REV_WMAC_MIN_S;
++ devid &= AR531X_REV_CHIP;
++ ar231x_board.devid = (u16) devid;
++ ar231x_gpiodev = &ar5312_gpiodev;
++}
++
++void __init
++ar5312_plat_setup(void)
++{
++ if (!is_5312())
++ return;
++
++ /* Clear any lingering AHB errors */
++ ar231x_read_reg(AR531X_PROCADDR);
++ ar231x_read_reg(AR531X_DMAADDR);
++ ar231x_write_reg(AR531X_WD_CTRL, AR531X_WD_CTRL_IGNORE_EXPIRATION);
++
++ _machine_restart = ar5312_restart;
++ ar231x_serial_setup(KSEG1ADDR(AR531X_UART0), ar5312_sys_frequency());
++}
++
+--- /dev/null
++++ b/arch/mips/ar231x/ar2315.c
+@@ -0,0 +1,658 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License. See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
++ * Copyright (C) 2006 FON Technology, SL.
++ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
++ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
++ */
++
++/*
++ * Platform devices for Atheros SoCs
++ */
++
++#include <generated/autoconf.h>
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/types.h>
++#include <linux/string.h>
++#include <linux/platform_device.h>
++#include <linux/kernel.h>
++#include <linux/reboot.h>
++#include <linux/delay.h>
++#include <linux/leds.h>
++#include <asm/bootinfo.h>
++#include <asm/reboot.h>
++#include <asm/time.h>
++#include <asm/irq.h>
++#include <asm/io.h>
++#include <asm/gpio.h>
++
++#include <ar231x_platform.h>
++#include <ar2315_regs.h>
++#include <ar231x.h>
++#include "devices.h"
++#include "ar2315.h"
++
++static u32 gpiointmask = 0, gpiointval = 0;
++
++static inline void ar2315_gpio_irq(void)
++{
++ u32 pend;
++ int bit = -1;
++
++ /* only do one gpio interrupt at a time */
++ pend = (ar231x_read_reg(AR2315_GPIO_DI) ^ gpiointval) & gpiointmask;
++
++ if (pend) {
++ bit = fls(pend) - 1;
++ pend &= ~(1 << bit);
++ gpiointval ^= (1 << bit);
++ }
++
++ if (!pend)
++ ar231x_write_reg(AR2315_ISR, AR2315_ISR_GPIO);
++
++ /* Enable interrupt with edge detection */
++ if ((ar231x_read_reg(AR2315_GPIO_CR) & AR2315_GPIO_CR_M(bit)) != AR2315_GPIO_CR_I(bit))
++ return;
++
++ if (bit >= 0)
++ do_IRQ(AR531X_GPIO_IRQ_BASE + bit);
++}
++
++
++/*
++ * Called when an interrupt is received, this function
++ * determines exactly which interrupt it was, and it
++ * invokes the appropriate handler.
++ *
++ * Implicitly, we also define interrupt priority by
++ * choosing which to dispatch first.
++ */
++static asmlinkage void
++ar2315_irq_dispatch(void)
++{
++ int pending = read_c0_status() & read_c0_cause();
++
++ if (pending & CAUSEF_IP3)
++ do_IRQ(AR2315_IRQ_WLAN0_INTRS);
++ else if (pending & CAUSEF_IP4)
++ do_IRQ(AR2315_IRQ_ENET0_INTRS);
++ else if (pending & CAUSEF_IP2) {
++ unsigned int misc_intr = ar231x_read_reg(AR2315_ISR) & ar231x_read_reg(AR2315_IMR);
++
++ if (misc_intr & AR2315_ISR_SPI)
++ do_IRQ(AR531X_MISC_IRQ_SPI);
++ else if (misc_intr & AR2315_ISR_TIMER)
++ do_IRQ(AR531X_MISC_IRQ_TIMER);
++ else if (misc_intr & AR2315_ISR_AHB)
++ do_IRQ(AR531X_MISC_IRQ_AHB_PROC);
++ else if (misc_intr & AR2315_ISR_GPIO)
++ ar2315_gpio_irq();
++ else if (misc_intr & AR2315_ISR_UART0)
++ do_IRQ(AR531X_MISC_IRQ_UART0);
++ else if (misc_intr & AR2315_ISR_WD)
++ do_IRQ(AR531X_MISC_IRQ_WATCHDOG);
++ else
++ do_IRQ(AR531X_MISC_IRQ_NONE);
++ } else if (pending & CAUSEF_IP7)
++ do_IRQ(AR531X_IRQ_CPU_CLOCK);
++}
++
++static void ar2315_set_gpiointmask(int gpio, int level)
++{
++ u32 reg;
++
++ reg = ar231x_read_reg(AR2315_GPIO_INT);
++ reg &= ~(AR2315_GPIO_INT_M | AR2315_GPIO_INT_LVL_M);
++ reg |= gpio | AR2315_GPIO_INT_LVL(level);
++ ar231x_write_reg(AR2315_GPIO_INT, reg);
++}
++
++static void ar2315_gpio_intr_enable(unsigned int irq)
++{
++ unsigned int gpio = irq - AR531X_GPIO_IRQ_BASE;
++
++ /* Enable interrupt with edge detection */
++ if ((ar231x_read_reg(AR2315_GPIO_CR) & AR2315_GPIO_CR_M(gpio)) != AR2315_GPIO_CR_I(gpio))
++ return;
++
++ gpiointmask |= (1 << gpio);
++ ar2315_set_gpiointmask(gpio, 3);
++}
++
++static unsigned int ar2315_gpio_intr_startup(unsigned int irq)
++{
++ unsigned int gpio = irq - AR531X_GPIO_IRQ_BASE;
++
++ /* reconfigure GPIO line as input */
++ ar231x_mask_reg(AR2315_GPIO_CR, AR2315_GPIO_CR_M(gpio), AR2315_GPIO_CR_I(gpio));
++ ar2315_gpio_intr_enable(irq);
++ return 0;
++}
++
++static void ar2315_gpio_intr_disable(unsigned int irq)
++{
++ unsigned int gpio = irq - AR531X_GPIO_IRQ_BASE;
++
++ /* Disable interrupt */
++ gpiointmask &= ~(1 << gpio);
++ ar2315_set_gpiointmask(gpio, 0);
++}
++
++static void
++ar2315_gpio_intr_end(unsigned int irq)
++{
++ if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
++ ar2315_gpio_intr_enable(irq);
++}
++
++static struct irq_chip ar2315_gpio_intr_controller = {
++ .typename = "AR2315-GPIO",
++ .startup = ar2315_gpio_intr_startup,
++ .ack = ar2315_gpio_intr_disable,
++ .mask_ack = ar2315_gpio_intr_disable,
++ .mask = ar2315_gpio_intr_disable,
++ .unmask = ar2315_gpio_intr_enable,
++ .end = ar2315_gpio_intr_end,
++};
++
++static void
++ar2315_misc_intr_enable(unsigned int irq)
++{
++ unsigned int imr;
++
++ imr = ar231x_read_reg(AR2315_IMR);
++ switch(irq) {
++ case AR531X_MISC_IRQ_SPI:
++ imr |= AR2315_ISR_SPI;
++ break;
++ case AR531X_MISC_IRQ_TIMER:
++ imr |= AR2315_ISR_TIMER;
++ break;
++ case AR531X_MISC_IRQ_AHB_PROC:
++ imr |= AR2315_ISR_AHB;
++ break;
++ case AR531X_MISC_IRQ_GPIO:
++ imr |= AR2315_ISR_GPIO;
++ break;
++ case AR531X_MISC_IRQ_UART0:
++ imr |= AR2315_ISR_UART0;
++ break;
++ case AR531X_MISC_IRQ_WATCHDOG:
++ imr |= AR2315_ISR_WD;
++ break;
++ default:
++ break;
++ }
++ ar231x_write_reg(AR2315_IMR, imr);
++}
++
++static void
++ar2315_misc_intr_disable(unsigned int irq)
++{
++ unsigned int imr;
++
++ imr = ar231x_read_reg(AR2315_IMR);
++ switch(irq) {
++ case AR531X_MISC_IRQ_SPI:
++ imr &= ~AR2315_ISR_SPI;
++ break;
++ case AR531X_MISC_IRQ_TIMER:
++ imr &= ~AR2315_ISR_TIMER;
++ break;
++ case AR531X_MISC_IRQ_AHB_PROC:
++ imr &= ~AR2315_ISR_AHB;
++ break;
++ case AR531X_MISC_IRQ_GPIO:
++ imr &= ~AR2315_ISR_GPIO;
++ break;
++ case AR531X_MISC_IRQ_UART0:
++ imr &= ~AR2315_ISR_UART0;
++ break;
++ case AR531X_MISC_IRQ_WATCHDOG:
++ imr &= ~AR2315_ISR_WD;
++ break;
++ default:
++ break;
++ }
++ ar231x_write_reg(AR2315_IMR, imr);
++}
++
++static void
++ar2315_misc_intr_end(unsigned int irq)
++{
++ if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
++ ar2315_misc_intr_enable(irq);
++}
++
++
++static struct irq_chip ar2315_misc_intr_controller = {
++ .typename = "AR2315-MISC",
++ .ack = ar2315_misc_intr_disable,
++ .mask_ack = ar2315_misc_intr_disable,
++ .mask = ar2315_misc_intr_disable,
++ .unmask = ar2315_misc_intr_enable,
++ .end = ar2315_misc_intr_end,
++};
++
++static irqreturn_t ar2315_ahb_proc_handler(int cpl, void *dev_id)
++{
++ ar231x_write_reg(AR2315_AHB_ERR0, AHB_ERROR_DET);
++ ar231x_read_reg(AR2315_AHB_ERR1);
++
++ printk(KERN_ERR "AHB fatal error\n");
++ machine_restart("AHB error"); /* Catastrophic failure */
++
++ return IRQ_HANDLED;
++}
++
++static struct irqaction ar2315_ahb_proc_interrupt = {
++ .handler = ar2315_ahb_proc_handler,
++ .flags = IRQF_DISABLED,
++ .name = "ar2315_ahb_proc_interrupt",
++};
++
++static struct irqaction cascade = {
++ .handler = no_action,
++ .flags = IRQF_DISABLED,
++ .name = "cascade",
++};
++
++void
++ar2315_irq_init(void)
++{
++ int i;
++
++ if (!is_2315())
++ return;
++
++ ar231x_irq_dispatch = ar2315_irq_dispatch;
++ gpiointval = ar231x_read_reg(AR2315_GPIO_DI);
++ for (i = 0; i < AR531X_MISC_IRQ_COUNT; i++) {
++ int irq = AR531X_MISC_IRQ_BASE + i;
++ set_irq_chip_and_handler(irq, &ar2315_misc_intr_controller,
++ handle_level_irq);
++ }
++ for (i = 0; i < AR531X_GPIO_IRQ_COUNT; i++) {
++ int irq = AR531X_GPIO_IRQ_BASE + i;
++ set_irq_chip_and_handler(irq, &ar2315_gpio_intr_controller,
++ handle_level_irq);
++ }
++ setup_irq(AR531X_MISC_IRQ_GPIO, &cascade);
++ setup_irq(AR531X_MISC_IRQ_AHB_PROC, &ar2315_ahb_proc_interrupt);
++ setup_irq(AR2315_IRQ_MISC_INTRS, &cascade);
++}
++
++const struct ar231x_gpiodev ar2315_gpiodev;
++
++static u32
++ar2315_gpio_get_output(void)
++{
++ u32 reg;
++ reg = ar231x_read_reg(AR2315_GPIO_CR);
++ reg &= ar2315_gpiodev.valid_mask;
++ return reg;
++}
++
++static u32
++ar2315_gpio_set_output(u32 mask, u32 val)
++{
++ u32 reg;
++
++ reg = ar231x_read_reg(AR2315_GPIO_CR);
++ reg &= ~mask;
++ reg |= val;
++ ar231x_write_reg(AR2315_GPIO_CR, reg);
++ return reg;
++}
++
++static u32
++ar2315_gpio_get(void)
++{
++ u32 reg;
++ reg = ar231x_read_reg(AR2315_GPIO_DI);
++ reg &= ar2315_gpiodev.valid_mask;
++ return reg;
++}
++
++static u32
++ar2315_gpio_set(u32 mask, u32 value)
++{
++ u32 reg;
++ reg = ar231x_read_reg(AR2315_GPIO_DO);
++ reg &= ~mask;
++ reg |= value;
++ ar231x_write_reg(AR2315_GPIO_DO, reg);
++ return reg;
++}
++
++const struct ar231x_gpiodev ar2315_gpiodev = {
++ .valid_mask = (1 << 22) - 1,
++ .get_output = ar2315_gpio_get_output,
++ .set_output = ar2315_gpio_set_output,
++ .get = ar2315_gpio_get,
++ .set = ar2315_gpio_set,
++};
++
++static struct ar231x_eth ar2315_eth_data = {
++ .reset_base = AR2315_RESET,
++ .reset_mac = AR2315_RESET_ENET0,
++ .reset_phy = AR2315_RESET_EPHY0,
++ .phy_base = AR2315_ENET0,
++ .config = &ar231x_board,
++};
++
++static struct resource ar2315_spiflash_res[] = {
++ {
++ .name = "flash_base",
++ .flags = IORESOURCE_MEM,
++ .start = KSEG1ADDR(AR2315_SPI_READ),
++ .end = KSEG1ADDR(AR2315_SPI_READ) + 0x1000000 - 1,
++ },
++ {
++ .name = "flash_regs",
++ .flags = IORESOURCE_MEM,
++ .start = 0x11300000,
++ .end = 0x11300012,
++ },
++};
++
++static struct platform_device ar2315_spiflash = {
++ .id = 0,
++ .name = "spiflash",
++ .resource = ar2315_spiflash_res,
++ .num_resources = ARRAY_SIZE(ar2315_spiflash_res)
++};
++
++static struct platform_device ar2315_wdt = {
++ .id = 0,
++ .name = "ar2315_wdt",
++};
++
++#define SPI_FLASH_CTL 0x00
++#define SPI_FLASH_OPCODE 0x04
++#define SPI_FLASH_DATA 0x08
++
++static inline u32
++spiflash_read_reg(int reg)
++{
++ return ar231x_read_reg(KSEG1ADDR(AR2315_SPI) + reg);
++}
++
++static inline void
++spiflash_write_reg(int reg, u32 data)
++{
++ ar231x_write_reg(KSEG1ADDR(AR2315_SPI) + reg, data);
++}
++
++static u32
++spiflash_wait_status(void)
++{
++ u32 reg;
++
++ do {
++ reg = spiflash_read_reg(SPI_FLASH_CTL);
++ } while (reg & SPI_CTL_BUSY);
++
++ return reg;
++}
++
++static u8
++spiflash_probe(void)
++{
++ u32 reg;
++
++ reg = spiflash_wait_status();
++ reg &= ~SPI_CTL_TX_RX_CNT_MASK;
++ reg |= (1 << 4) | 4 | SPI_CTL_START;
++
++ spiflash_write_reg(SPI_FLASH_OPCODE, 0xab);
++ spiflash_write_reg(SPI_FLASH_CTL, reg);
++
++ reg = spiflash_wait_status();
++ reg = spiflash_read_reg(SPI_FLASH_DATA);
++ reg &= 0xff;
++
++ return (u8) reg;
++}
++
++
++#define STM_8MBIT_SIGNATURE 0x13
++#define STM_16MBIT_SIGNATURE 0x14
++#define STM_32MBIT_SIGNATURE 0x15
++#define STM_64MBIT_SIGNATURE 0x16
++#define STM_128MBIT_SIGNATURE 0x17
++
++static u8 __init *
++ar2315_flash_limit(void)
++{
++ u32 flash_size = 0;
++
++ /* probe the flash chip size */
++ switch(spiflash_probe()) {
++ case STM_8MBIT_SIGNATURE:
++ flash_size = 0x00100000;
++ break;
++ case STM_16MBIT_SIGNATURE:
++ flash_size = 0x00200000;
++ break;
++ case STM_32MBIT_SIGNATURE:
++ flash_size = 0x00400000;
++ break;
++ case STM_64MBIT_SIGNATURE:
++ flash_size = 0x00800000;
++ break;
++ case STM_128MBIT_SIGNATURE:
++ flash_size = 0x01000000;
++ break;
++ }
++
++ ar2315_spiflash_res[0].end = ar2315_spiflash_res[0].start +
++ flash_size - 1;
++ return (u8 *) ar2315_spiflash_res[0].end + 1;
++}
++
++#ifdef CONFIG_LEDS_GPIO
++static struct gpio_led ar2315_leds[6];
++static struct gpio_led_platform_data ar2315_led_data = {
++ .leds = (void *) ar2315_leds,
++};
++
++static struct platform_device ar2315_gpio_leds = {
++ .name = "leds-gpio",
++ .id = -1,
++ .dev = {
++ .platform_data = (void *) &ar2315_led_data,
++ }
++};
++
++static void __init
++ar2315_init_gpio(void)
++{
++ static char led_names[6][6];
++ int i, led = 0;
++
++ ar2315_led_data.num_leds = 0;
++ for(i = 1; i < 8; i++)
++ {
++ if((i == AR2315_RESET_GPIO) ||
++ (i == ar231x_board.config->resetConfigGpio))
++ continue;
++
++ if(i == ar231x_board.config->sysLedGpio)
++ strcpy(led_names[led], "wlan");
++ else
++ sprintf(led_names[led], "gpio%d", i);
++
++ ar2315_leds[led].name = led_names[led];
++ ar2315_leds[led].gpio = i;
++ ar2315_leds[led].active_low = 0;
++ led++;
++ }
++ ar2315_led_data.num_leds = led;
++ platform_device_register(&ar2315_gpio_leds);
++}
++#else
++static inline void ar2315_init_gpio(void)
++{
++}
++#endif
++
++int __init
++ar2315_init_devices(void)
++{
++ if (!is_2315())
++ return 0;
++
++ /* Find board configuration */
++ ar231x_find_config(ar2315_flash_limit());
++ ar2315_eth_data.macaddr = ar231x_board.config->enet0_mac;
++
++ ar2315_init_gpio();
++ platform_device_register(&ar2315_wdt);
++ platform_device_register(&ar2315_spiflash);
++ ar231x_add_ethernet(0, AR2315_ENET0, AR2315_IRQ_ENET0_INTRS,
++ &ar2315_eth_data);
++ ar231x_add_wmac(0, AR2315_WLAN0, AR2315_IRQ_WLAN0_INTRS);
++
++ return 0;
++}
++
++static void
++ar2315_restart(char *command)
++{
++ void (*mips_reset_vec)(void) = (void *) 0xbfc00000;
++
++ local_irq_disable();
++
++ /* try reset the system via reset control */
++ ar231x_write_reg(AR2315_COLD_RESET,AR2317_RESET_SYSTEM);
++
++ /* Cold reset does not work on the AR2315/6, use the GPIO reset bits a workaround.
++ * give it some time to attempt a gpio based hardware reset
++ * (atheros reference design workaround) */
++ gpio_direction_output(AR2315_RESET_GPIO, 0);
++ mdelay(100);
++
++ /* Some boards (e.g. Senao EOC-2610) don't implement the reset logic
++ * workaround. Attempt to jump to the mips reset location -
++ * the boot loader itself might be able to recover the system */
++ mips_reset_vec();
++}
++
++
++/*
++ * This table is indexed by bits 5..4 of the CLOCKCTL1 register
++ * to determine the predevisor value.
++ */
++static int __initdata CLOCKCTL1_PREDIVIDE_TABLE[4] = { 1, 2, 4, 5 };
++static int __initdata PLLC_DIVIDE_TABLE[5] = { 2, 3, 4, 6, 3 };
++
++static unsigned int __init
++ar2315_sys_clk(unsigned int clockCtl)
++{
++ unsigned int pllcCtrl,cpuDiv;
++ unsigned int pllcOut,refdiv,fdiv,divby2;
++ unsigned int clkDiv;
++
++ pllcCtrl = ar231x_read_reg(AR2315_PLLC_CTL);
++ refdiv = (pllcCtrl & PLLC_REF_DIV_M) >> PLLC_REF_DIV_S;
++ refdiv = CLOCKCTL1_PREDIVIDE_TABLE[refdiv];
++ fdiv = (pllcCtrl & PLLC_FDBACK_DIV_M) >> PLLC_FDBACK_DIV_S;
++ divby2 = (pllcCtrl & PLLC_ADD_FDBACK_DIV_M) >> PLLC_ADD_FDBACK_DIV_S;
++ divby2 += 1;
++ pllcOut = (40000000/refdiv)*(2*divby2)*fdiv;
++
++
++ /* clkm input selected */
++ switch(clockCtl & CPUCLK_CLK_SEL_M) {
++ case 0:
++ case 1:
++ clkDiv = PLLC_DIVIDE_TABLE[(pllcCtrl & PLLC_CLKM_DIV_M) >> PLLC_CLKM_DIV_S];
++ break;
++ case 2:
++ clkDiv = PLLC_DIVIDE_TABLE[(pllcCtrl & PLLC_CLKC_DIV_M) >> PLLC_CLKC_DIV_S];
++ break;
++ default:
++ pllcOut = 40000000;
++ clkDiv = 1;
++ break;
++ }
++ cpuDiv = (clockCtl & CPUCLK_CLK_DIV_M) >> CPUCLK_CLK_DIV_S;
++ cpuDiv = cpuDiv * 2 ?: 1;
++ return (pllcOut/(clkDiv * cpuDiv));
++}
++
++static inline unsigned int
++ar2315_cpu_frequency(void)
++{
++ return ar2315_sys_clk(ar231x_read_reg(AR2315_CPUCLK));
++}
++
++static inline unsigned int
++ar2315_apb_frequency(void)
++{
++ return ar2315_sys_clk(ar231x_read_reg(AR2315_AMBACLK));
++}
++
++void __init
++ar2315_time_init(void)
++{
++ if (!is_2315())
++ return;
++
++ mips_hpt_frequency = ar2315_cpu_frequency() / 2;
++}
++
++void __init
++ar2315_prom_init(void)
++{
++ u32 memsize, memcfg, devid;
++
++ if (!is_2315())
++ return;
++
++ memcfg = ar231x_read_reg(AR2315_MEM_CFG);
++ memsize = 1 + ((memcfg & SDRAM_DATA_WIDTH_M) >> SDRAM_DATA_WIDTH_S);
++ memsize <<= 1 + ((memcfg & SDRAM_COL_WIDTH_M) >> SDRAM_COL_WIDTH_S);
++ memsize <<= 1 + ((memcfg & SDRAM_ROW_WIDTH_M) >> SDRAM_ROW_WIDTH_S);
++ memsize <<= 3;
++ add_memory_region(0, memsize, BOOT_MEM_RAM);
++
++ /* Detect the hardware based on the device ID */
++ devid = ar231x_read_reg(AR2315_SREV) & AR2315_REV_CHIP;
++ switch(devid) {
++ case 0x90:
++ case 0x91:
++ ar231x_devtype = DEV_TYPE_AR2317;
++ break;
++ default:
++ ar231x_devtype = DEV_TYPE_AR2315;
++ break;
++ }
++ ar231x_gpiodev = &ar2315_gpiodev;
++ ar231x_board.devid = devid;
++}
++
++void __init
++ar2315_plat_setup(void)
++{
++ u32 config;
++
++ if (!is_2315())
++ return;
++
++ /* Clear any lingering AHB errors */
++ config = read_c0_config();
++ write_c0_config(config & ~0x3);
++ ar231x_write_reg(AR2315_AHB_ERR0,AHB_ERROR_DET);
++ ar231x_read_reg(AR2315_AHB_ERR1);
++ ar231x_write_reg(AR2315_WDC, AR2315_WDC_IGNORE_EXPIRATION);
++
++ _machine_restart = ar2315_restart;
++ ar231x_serial_setup(KSEG1ADDR(AR2315_UART0), ar2315_apb_frequency());
++}
+--- /dev/null
++++ b/arch/mips/ar231x/ar2315.h
+@@ -0,0 +1,37 @@
++#ifndef __AR2315_H
++#define __AR2315_H
++
++#ifdef CONFIG_ATHEROS_AR2315
++
++extern void ar2315_irq_init(void);
++extern int ar2315_init_devices(void);
++extern void ar2315_prom_init(void);
++extern void ar2315_plat_setup(void);
++extern void ar2315_time_init(void);
++
++#else
++
++static inline void ar2315_irq_init(void)
++{
++}
++
++static inline int ar2315_init_devices(void)
++{
++ return 0;
++}
++
++static inline void ar2315_prom_init(void)
++{
++}
++
++static inline void ar2315_plat_setup(void)
++{
++}
++
++static inline void ar2315_time_init(void)
++{
++}
++
++#endif
++
++#endif
+--- /dev/null
++++ b/arch/mips/ar231x/ar5312.h
+@@ -0,0 +1,38 @@
++#ifndef __AR5312_H
++#define __AR5312_H
++
++#ifdef CONFIG_ATHEROS_AR5312
++
++extern void ar5312_irq_init(void);
++extern int ar5312_init_devices(void);
++extern void ar5312_prom_init(void);
++extern void ar5312_plat_setup(void);
++extern void ar5312_time_init(void);
++extern void ar5312_time_init(void);
++
++#else
++
++static inline void ar5312_irq_init(void)
++{
++}
++
++static inline int ar5312_init_devices(void)
++{
++ return 0;
++}
++
++static inline void ar5312_prom_init(void)
++{
++}
++
++static inline void ar5312_plat_setup(void)
++{
++}
++
++static inline void ar5312_time_init(void)
++{
++}
++
++#endif
++
++#endif
+--- /dev/null
++++ b/arch/mips/include/asm/mach-ar231x/ar231x.h
+@@ -0,0 +1,54 @@
++#ifndef __AR531X_H
++#define __AR531X_H
++
++#define AR531X_MISC_IRQ_BASE 0x20
++#define AR531X_GPIO_IRQ_BASE 0x30
++
++/* Software's idea of interrupts handled by "CPU Interrupt Controller" */
++#define AR531X_IRQ_NONE MIPS_CPU_IRQ_BASE+0
++#define AR531X_IRQ_CPU_CLOCK MIPS_CPU_IRQ_BASE+7 /* C0_CAUSE: 0x8000 */
++
++/* Miscellaneous interrupts, which share IP6 */
++#define AR531X_MISC_IRQ_NONE AR531X_MISC_IRQ_BASE+0
++#define AR531X_MISC_IRQ_TIMER AR531X_MISC_IRQ_BASE+1
++#define AR531X_MISC_IRQ_AHB_PROC AR531X_MISC_IRQ_BASE+2
++#define AR531X_MISC_IRQ_AHB_DMA AR531X_MISC_IRQ_BASE+3
++#define AR531X_MISC_IRQ_GPIO AR531X_MISC_IRQ_BASE+4
++#define AR531X_MISC_IRQ_UART0 AR531X_MISC_IRQ_BASE+5
++#define AR531X_MISC_IRQ_UART0_DMA AR531X_MISC_IRQ_BASE+6
++#define AR531X_MISC_IRQ_WATCHDOG AR531X_MISC_IRQ_BASE+7
++#define AR531X_MISC_IRQ_LOCAL AR531X_MISC_IRQ_BASE+8
++#define AR531X_MISC_IRQ_SPI AR531X_MISC_IRQ_BASE+9
++#define AR531X_MISC_IRQ_COUNT 10
++
++/* GPIO Interrupts [0..7], share AR531X_MISC_IRQ_GPIO */
++#define AR531X_GPIO_IRQ_NONE AR531X_GPIO_IRQ_BASE+0
++#define AR531X_GPIO_IRQ(n) AR531X_GPIO_IRQ_BASE+n
++#define AR531X_GPIO_IRQ_COUNT 22
++
++static inline u32
++ar231x_read_reg(u32 reg)
++{
++ return __raw_readl((u32 *) KSEG1ADDR(reg));
++}
++
++static inline void
++ar231x_write_reg(u32 reg, u32 val)
++{
++ __raw_writel(val, (u32 *) KSEG1ADDR(reg));
++}
++
++static inline u32
++ar231x_mask_reg(u32 reg, u32 mask, u32 val)
++{
++ u32 ret;
++
++ ret = ar231x_read_reg(reg);
++ ret &= ~mask;
++ ret |= val;
++ ar231x_write_reg(reg, ret);
++
++ return ret;
++}
++
++#endif
+--- /dev/null
++++ b/arch/mips/ar231x/devices.h
+@@ -0,0 +1,37 @@
++#ifndef __AR231X_DEVICES_H
++#define __AR231X_DEVICES_H
++
++enum {
++ /* handled by ar5312.c */
++ DEV_TYPE_AR2312,
++ DEV_TYPE_AR2313,
++ DEV_TYPE_AR5312,
++
++ /* handled by ar2315.c */
++ DEV_TYPE_AR2315,
++ DEV_TYPE_AR2316,
++ DEV_TYPE_AR2317,
++
++ DEV_TYPE_UNKNOWN
++};
++
++extern int ar231x_devtype;
++extern struct ar231x_board_config ar231x_board;
++extern asmlinkage void (*ar231x_irq_dispatch)(void);
++
++extern int ar231x_find_config(u8 *flash_limit);
++extern void ar231x_serial_setup(u32 mapbase, unsigned int uartclk);
++extern int ar231x_add_wmac(int nr, u32 base, int irq);
++extern int ar231x_add_ethernet(int nr, u32 base, int irq, void *pdata);
++
++static inline bool is_2315(void)
++{
++ return (current_cpu_data.cputype == CPU_4KEC);
++}
++
++static inline bool is_5312(void)
++{
++ return !is_2315();
++}
++
++#endif
+--- /dev/null
++++ b/arch/mips/ar231x/devices.c
+@@ -0,0 +1,175 @@
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/serial.h>
++#include <linux/serial_core.h>
++#include <linux/serial_8250.h>
++#include <linux/platform_device.h>
++#include <ar231x_platform.h>
++#include <ar231x.h>
++#include "devices.h"
++#include "ar5312.h"
++#include "ar2315.h"
++
++struct ar231x_board_config ar231x_board;
++int ar231x_devtype = DEV_TYPE_UNKNOWN;
++const struct ar231x_gpiodev *ar231x_gpiodev;
++EXPORT_SYMBOL(ar231x_gpiodev);
++
++static struct resource ar231x_eth0_res[] = {
++ {
++ .name = "eth0_membase",
++ .flags = IORESOURCE_MEM,
++ },
++ {
++ .name = "eth0_irq",
++ .flags = IORESOURCE_IRQ,
++ }
++};
++
++static struct resource ar231x_eth1_res[] = {
++ {
++ .name = "eth1_membase",
++ .flags = IORESOURCE_MEM,
++ },
++ {
++ .name = "eth1_irq",
++ .flags = IORESOURCE_IRQ,
++ }
++};
++
++static struct platform_device ar231x_eth[] = {
++ {
++ .id = 0,
++ .name = "ar231x-eth",
++ .resource = ar231x_eth0_res,
++ .num_resources = ARRAY_SIZE(ar231x_eth0_res)
++ },
++ {
++ .id = 1,
++ .name = "ar231x-eth",
++ .resource = ar231x_eth1_res,
++ .num_resources = ARRAY_SIZE(ar231x_eth1_res)
++ }
++};
++
++static struct resource ar231x_wmac0_res[] = {
++ {
++ .name = "wmac0_membase",
++ .flags = IORESOURCE_MEM,
++ },
++ {
++ .name = "wmac0_irq",
++ .flags = IORESOURCE_IRQ,
++ }
++};
++
++static struct resource ar231x_wmac1_res[] = {
++ {
++ .name = "wmac1_membase",
++ .flags = IORESOURCE_MEM,
++ },
++ {
++ .name = "wmac1_irq",
++ .flags = IORESOURCE_IRQ,
++ }
++};
++
++
++static struct platform_device ar231x_wmac[] = {
++ {
++ .id = 0,
++ .name = "ar231x-wmac",
++ .resource = ar231x_wmac0_res,
++ .num_resources = ARRAY_SIZE(ar231x_wmac0_res),
++ .dev.platform_data = &ar231x_board,
++ },
++ {
++ .id = 1,
++ .name = "ar231x-wmac",
++ .resource = ar231x_wmac1_res,
++ .num_resources = ARRAY_SIZE(ar231x_wmac1_res),
++ .dev.platform_data = &ar231x_board,
++ },
++};
++
++static const char *devtype_strings[] = {
++ [DEV_TYPE_AR5312] = "Atheros AR5312",
++ [DEV_TYPE_AR2312] = "Atheros AR2312",
++ [DEV_TYPE_AR2313] = "Atheros AR2313",
++ [DEV_TYPE_AR2315] = "Atheros AR2315",
++ [DEV_TYPE_AR2316] = "Atheros AR2316",
++ [DEV_TYPE_AR2317] = "Atheros AR2317",
++ [DEV_TYPE_UNKNOWN] = "Atheros (unknown)",
++};
++
++const char *get_system_type(void)
++{
++ if ((ar231x_devtype >= ARRAY_SIZE(devtype_strings)) ||
++ !devtype_strings[ar231x_devtype])
++ return devtype_strings[DEV_TYPE_UNKNOWN];
++ return devtype_strings[ar231x_devtype];
++}
++
++
++int __init
++ar231x_add_ethernet(int nr, u32 base, int irq, void *pdata)
++{
++ struct resource *res;
++
++ ar231x_eth[nr].dev.platform_data = pdata;
++ res = &ar231x_eth[nr].resource[0];
++ res->start = base;
++ res->end = base + 0x2000 - 1;
++ res++;
++ res->start = irq;
++ res->end = irq;
++ return platform_device_register(&ar231x_eth[nr]);
++}
++
++void __init
++ar231x_serial_setup(u32 mapbase, unsigned int uartclk)
++{
++ struct uart_port s;
++
++ memset(&s, 0, sizeof(s));
++
++ s.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
++ s.iotype = UPIO_MEM;
++ s.irq = AR531X_MISC_IRQ_UART0;
++ s.regshift = 2;
++ s.mapbase = mapbase;
++ s.uartclk = uartclk;
++ s.membase = (void __iomem *)s.mapbase;
++
++ early_serial_setup(&s);
++}
++
++int __init
++ar231x_add_wmac(int nr, u32 base, int irq)
++{
++ struct resource *res;
++
++ ar231x_wmac[nr].dev.platform_data = &ar231x_board;
++ res = &ar231x_wmac[nr].resource[0];
++ res->start = base;
++ res->end = base + 0x10000 - 1;
++ res++;
++ res->start = irq;
++ res->end = irq;
++ return platform_device_register(&ar231x_wmac[nr]);
++}
++
++static int __init ar231x_register_devices(void)
++{
++ static struct resource res = {
++ .start = 0xFFFFFFFF,
++ };
++
++ platform_device_register_simple("GPIODEV", 0, &res, 1);
++ ar5312_init_devices();
++ ar2315_init_devices();
++
++ return 0;
++}
++
++device_initcall(ar231x_register_devices);
diff --git a/target/linux/atheros/patches-2.6.34/101-early-printk-support.patch b/target/linux/atheros/patches-2.6.34/101-early-printk-support.patch
new file mode 100644
index 000000000..8feec4c67
--- /dev/null
+++ b/target/linux/atheros/patches-2.6.34/101-early-printk-support.patch
@@ -0,0 +1,68 @@
+--- /dev/null
++++ b/arch/mips/ar231x/early_printk.c
+@@ -0,0 +1,44 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License. See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org>
++ */
++
++#include <linux/mm.h>
++#include <linux/io.h>
++#include <linux/serial_reg.h>
++#include <asm/addrspace.h>
++
++#include <asm/mach-ar231x/ar2315_regs.h>
++#include <asm/mach-ar231x/ar5312_regs.h>
++#include "devices.h"
++
++static inline void prom_uart_wr(void __iomem *base, unsigned reg,
++ unsigned char ch)
++{
++ __raw_writeb(ch, base + 4 * reg);
++}
++
++static inline unsigned char prom_uart_rr(void __iomem *base, unsigned reg)
++{
++ return __raw_readb(base + 4 * reg);
++}
++
++void prom_putchar(unsigned char ch)
++{
++ static void __iomem *base;
++
++ if (unlikely(base == NULL)) {
++ if (is_2315())
++ base = (void __iomem *)(KSEG1ADDR(AR2315_UART0));
++ else
++ base = (void __iomem *)(KSEG1ADDR(AR531X_UART0));
++ }
++
++ while ((prom_uart_rr(base, UART_LSR) & UART_LSR_THRE) == 0);
++ prom_uart_wr(base, UART_TX, ch);
++ while ((prom_uart_rr(base, UART_LSR) & UART_LSR_THRE) == 0);
++}
++
+--- a/arch/mips/ar231x/Makefile
++++ b/arch/mips/ar231x/Makefile
+@@ -9,5 +9,8 @@
+ #
+
+ obj-y += board.o prom.o devices.o
++
++obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
++
+ obj-$(CONFIG_ATHEROS_AR5312) += ar5312.o
+ obj-$(CONFIG_ATHEROS_AR2315) += ar2315.o
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -94,6 +94,7 @@ config ATHEROS_AR231X
+ select SYS_SUPPORTS_BIG_ENDIAN
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select GENERIC_GPIO
++ select SYS_HAS_EARLY_PRINTK
+ help
+ Support for AR231x and AR531x based boards
+
diff --git a/target/linux/atheros/patches-2.6.34/105-ar2315_pci.patch b/target/linux/atheros/patches-2.6.34/105-ar2315_pci.patch
new file mode 100644
index 000000000..3f5e6b452
--- /dev/null
+++ b/target/linux/atheros/patches-2.6.34/105-ar2315_pci.patch
@@ -0,0 +1,297 @@
+--- a/arch/mips/ar231x/Makefile
++++ b/arch/mips/ar231x/Makefile
+@@ -14,3 +14,4 @@ obj-$(CONFIG_EARLY_PRINTK) += early_prin
+
+ obj-$(CONFIG_ATHEROS_AR5312) += ar5312.o
+ obj-$(CONFIG_ATHEROS_AR2315) += ar2315.o
++obj-$(CONFIG_ATHEROS_AR2315_PCI) += pci.o
+--- /dev/null
++++ b/arch/mips/ar231x/pci.c
+@@ -0,0 +1,230 @@
++/*
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version 2
++ * of the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
++ */
++
++#include <linux/types.h>
++#include <linux/pci.h>
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/mm.h>
++#include <linux/spinlock.h>
++#include <linux/delay.h>
++#include <linux/irq.h>
++#include <asm/bootinfo.h>
++#include <asm/paccess.h>
++#include <asm/irq_cpu.h>
++#include <asm/io.h>
++#include <ar231x_platform.h>
++#include <ar231x.h>
++#include <ar2315_regs.h>
++#include "devices.h"
++
++#define AR531X_MEM_BASE 0x80800000UL
++#define AR531X_MEM_SIZE 0x00ffffffUL
++#define AR531X_IO_SIZE 0x00007fffUL
++
++static unsigned long configspace;
++
++static int config_access(int devfn, int where, int size, u32 *ptr, bool write)
++{
++ unsigned long flags;
++ int func = PCI_FUNC(devfn);
++ int dev = PCI_SLOT(devfn);
++ u32 value = 0;
++ int err = 0;
++ u32 addr;
++
++ if (((dev != 0) && (dev != 3)) || (func > 2))
++ return PCIBIOS_DEVICE_NOT_FOUND;
++
++ /* Select Configuration access */
++ local_irq_save(flags);
++ ar231x_mask_reg(AR2315_PCI_MISC_CONFIG, 0, AR2315_PCIMISC_CFG_SEL);
++ mb();
++
++ addr = (u32) configspace + (1 << (13 + dev)) + (func << 8) + where;
++ if (size == 1)
++ addr ^= 0x3;
++ else if (size == 2)
++ addr ^= 0x2;
++
++ if (write) {
++ value = *ptr;
++ if (size == 1)
++ err = put_dbe(value, (u8 *) addr);
++ else if (size == 2)
++ err = put_dbe(value, (u16 *) addr);
++ else if (size == 4)
++ err = put_dbe(value, (u32 *) addr);
++ } else {
++ if (size == 1)
++ err = get_dbe(value, (u8 *) addr);
++ else if (size == 2)
++ err = get_dbe(value, (u16 *) addr);
++ else if (size == 4)
++ err = get_dbe(value, (u32 *) addr);
++ if (err)
++ *ptr = 0xffffffff;
++ else
++ *ptr = value;
++ }
++
++ /* Select Memory access */
++ ar231x_mask_reg(AR2315_PCI_MISC_CONFIG, AR2315_PCIMISC_CFG_SEL, 0);
++ local_irq_restore(flags);
++
++ return (err ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL);
++}
++
++static int ar231x_pci_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 * value)
++{
++ return config_access(devfn, where, size, value, 0);
++}
++
++static int ar231x_pci_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 value)
++{
++ return config_access(devfn, where, size, &value, 1);
++}
++
++struct pci_ops ar231x_pci_ops = {
++ .read = ar231x_pci_read,
++ .write = ar231x_pci_write,
++};
++
++static struct resource ar231x_mem_resource = {
++ .name = "AR531x PCI MEM",
++ .start = AR531X_MEM_BASE,
++ .end = AR531X_MEM_BASE + AR531X_MEM_SIZE - AR531X_IO_SIZE - 1 + 0x4000000,
++ .flags = IORESOURCE_MEM,
++};
++
++static struct resource ar231x_io_resource = {
++ .name = "AR531x PCI I/O",
++ .start = AR531X_MEM_BASE + AR531X_MEM_SIZE - AR531X_IO_SIZE,
++ .end = AR531X_MEM_BASE + AR531X_MEM_SIZE - 1,
++ .flags = IORESOURCE_IO,
++};
++
++struct pci_controller ar231x_pci_controller = {
++ .pci_ops = &ar231x_pci_ops,
++ .mem_resource = &ar231x_mem_resource,
++ .io_resource = &ar231x_io_resource,
++ .mem_offset = 0x00000000UL,
++ .io_offset = 0x00000000UL,
++};
++
++int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
++{
++ return AR2315_IRQ_LCBUS_PCI;
++}
++
++int pcibios_plat_dev_init(struct pci_dev *dev)
++{
++ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, 5);
++ pci_write_config_word(dev, 0x40, 0);
++
++ /* Clear any pending Abort or external Interrupts
++ * and enable interrupt processing */
++ ar231x_mask_reg(AR2315_PCI_INTEN_REG, AR2315_PCI_INT_ENABLE, 0);
++ ar231x_write_reg(AR2315_PCI_INT_STATUS, (AR2315_PCI_ABORT_INT | AR2315_PCI_EXT_INT));
++ ar231x_write_reg(AR2315_PCI_INT_MASK, (AR2315_PCI_ABORT_INT | AR2315_PCI_EXT_INT));
++ ar231x_mask_reg(AR2315_PCI_INTEN_REG, 0, AR2315_PCI_INT_ENABLE);
++
++ return 0;
++}
++
++static void
++ar2315_pci_fixup(struct pci_dev *dev)
++{
++ unsigned int devfn = dev->devfn;
++
++ if (dev->bus->number != 0)
++ return;
++
++ /* Only fix up the PCI host settings */
++ if ((PCI_SLOT(devfn) != 3) || (PCI_FUNC(devfn) != 0))
++ return;
++
++ /* Fix up MBARs */
++ pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, HOST_PCI_MBAR0);
++ pci_write_config_dword(dev, PCI_BASE_ADDRESS_1, HOST_PCI_MBAR1);
++ pci_write_config_dword(dev, PCI_BASE_ADDRESS_2, HOST_PCI_MBAR2);
++ pci_write_config_dword(dev, PCI_COMMAND,
++ PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_SPECIAL |
++ PCI_COMMAND_INVALIDATE | PCI_COMMAND_PARITY | PCI_COMMAND_SERR |
++ PCI_COMMAND_FAST_BACK);
++}
++DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, ar2315_pci_fixup);
++
++static int __init
++ar2315_pci_init(void)
++{
++ u32 reg;
++
++ if (ar231x_devtype != DEV_TYPE_AR2315)
++ return -ENODEV;
++
++ configspace = (unsigned long) ioremap_nocache(0x80000000, 1*1024*1024); /* Remap PCI config space */
++ ar231x_pci_controller.io_map_base =
++ (unsigned long) ioremap_nocache(AR531X_MEM_BASE + AR531X_MEM_SIZE, AR531X_IO_SIZE);
++ set_io_port_base(ar231x_pci_controller.io_map_base); /* PCI I/O space */
++
++ reg = ar231x_mask_reg(AR2315_RESET, 0, AR2315_RESET_PCIDMA);
++ msleep(10);
++
++ reg &= ~AR2315_RESET_PCIDMA;
++ ar231x_write_reg(AR2315_RESET, reg);
++ msleep(10);
++
++ ar231x_mask_reg(AR2315_ENDIAN_CTL, 0,
++ AR2315_CONFIG_PCIAHB | AR2315_CONFIG_PCIAHB_BRIDGE);
++
++ ar231x_write_reg(AR2315_PCICLK, AR2315_PCICLK_PLLC_CLKM |
++ (AR2315_PCICLK_IN_FREQ_DIV_6 << AR2315_PCICLK_DIV_S));
++ ar231x_mask_reg(AR2315_AHB_ARB_CTL, 0, AR2315_ARB_PCI);
++ ar231x_mask_reg(AR2315_IF_CTL, AR2315_IF_PCI_CLK_MASK | AR2315_IF_MASK,
++ AR2315_IF_PCI | AR2315_IF_PCI_HOST | AR2315_IF_PCI_INTR |
++ (AR2315_IF_PCI_CLK_OUTPUT_CLK << AR2315_IF_PCI_CLK_SHIFT));
++
++ /* Reset the PCI bus by setting bits 5-4 in PCI_MCFG */
++ ar231x_mask_reg(AR2315_PCI_MISC_CONFIG, AR2315_PCIMISC_RST_MODE,
++ AR2315_PCIRST_LOW);
++ msleep(100);
++
++ /* Bring the PCI out of reset */
++ ar231x_mask_reg(AR2315_PCI_MISC_CONFIG, AR2315_PCIMISC_RST_MODE,
++ AR2315_PCIRST_HIGH | AR2315_PCICACHE_DIS | 0x8);
++
++ ar231x_write_reg(AR2315_PCI_UNCACHE_CFG,
++ 0x1E | /* 1GB uncached */
++ (1 << 5) | /* Enable uncached */
++ (0x2 << 30) /* Base: 0x80000000 */
++ );
++ ar231x_read_reg(AR2315_PCI_UNCACHE_CFG);
++
++ msleep(500);
++
++ /* dirty hack - anyone with a datasheet that knows the memory map ? */
++ ioport_resource.start = 0x10000000;
++ ioport_resource.end = 0xffffffff;
++ iomem_resource.start = 0x10000000;
++ iomem_resource.end = 0xffffffff;
++
++ register_pci_controller(&ar231x_pci_controller);
++
++ return 0;
++}
++
++arch_initcall(ar2315_pci_init);
+--- a/arch/mips/ar231x/Kconfig
++++ b/arch/mips/ar231x/Kconfig
+@@ -15,3 +15,13 @@ config ATHEROS_AR2315
+ select SYS_SUPPORTS_BIG_ENDIAN
+ select GENERIC_GPIO
+ default y
++
++config ATHEROS_AR2315_PCI
++ bool "PCI support"
++ depends on ATHEROS_AR2315
++ select HW_HAS_PCI
++ select PCI
++ select USB_ARCH_HAS_HCD
++ select USB_ARCH_HAS_OHCI
++ select USB_ARCH_HAS_EHCI
++ default y
+--- a/arch/mips/ar231x/ar2315.c
++++ b/arch/mips/ar231x/ar2315.c
+@@ -63,6 +63,27 @@ static inline void ar2315_gpio_irq(void)
+ do_IRQ(AR531X_GPIO_IRQ_BASE + bit);
+ }
+
++#ifdef CONFIG_ATHEROS_AR2315_PCI
++static inline void pci_abort_irq(void)
++{
++ ar231x_write_reg(AR2315_PCI_INT_STATUS, AR2315_PCI_ABORT_INT);
++}
++
++static inline void pci_ack_irq(void)
++{
++ ar231x_write_reg(AR2315_PCI_INT_STATUS, AR2315_PCI_EXT_INT);
++}
++
++void ar2315_pci_irq(int irq)
++{
++ if (ar231x_read_reg(AR2315_PCI_INT_STATUS) == AR2315_PCI_ABORT_INT)
++ pci_abort_irq();
++ else {
++ do_IRQ(irq);
++ pci_ack_irq();
++ }
++}
++#endif /* CONFIG_ATHEROS_AR2315_PCI */
+
+ /*
+ * Called when an interrupt is received, this function
+@@ -81,6 +102,10 @@ ar2315_irq_dispatch(void)
+ do_IRQ(AR2315_IRQ_WLAN0_INTRS);
+ else if (pending & CAUSEF_IP4)
+ do_IRQ(AR2315_IRQ_ENET0_INTRS);
++#ifdef CONFIG_ATHEROS_AR2315_PCI
++ else if (pending & CAUSEF_IP5)
++ ar2315_pci_irq(AR2315_IRQ_LCBUS_PCI);
++#endif
+ else if (pending & CAUSEF_IP2) {
+ unsigned int misc_intr = ar231x_read_reg(AR2315_ISR) & ar231x_read_reg(AR2315_IMR);
+
diff --git a/target/linux/atheros/patches-2.6.34/110-ar2313_ethernet.patch b/target/linux/atheros/patches-2.6.34/110-ar2313_ethernet.patch
new file mode 100644
index 000000000..5c6e5568e
--- /dev/null
+++ b/target/linux/atheros/patches-2.6.34/110-ar2313_ethernet.patch
@@ -0,0 +1,1596 @@
+--- a/drivers/net/Kconfig
++++ b/drivers/net/Kconfig
+@@ -371,6 +371,12 @@ config AX88796_93CX6
+ help
+ Select this if your platform comes with an external 93CX6 eeprom.
+
++config AR231X_ETHERNET
++ tristate "AR231x Ethernet support"
++ depends on ATHEROS_AR231X
++ help
++ Support for the AR231x/531x ethernet controller
++
+ config MACE
+ tristate "MACE (Power Mac ethernet) support"
+ depends on PPC_PMAC && PPC32
+--- a/drivers/net/Makefile
++++ b/drivers/net/Makefile
+@@ -221,6 +221,7 @@ obj-$(CONFIG_EQUALIZER) += eql.o
+ obj-$(CONFIG_KORINA) += korina.o
+ obj-$(CONFIG_MIPS_JAZZ_SONIC) += jazzsonic.o
+ obj-$(CONFIG_MIPS_AU1X00_ENET) += au1000_eth.o
++obj-$(CONFIG_AR231X_ETHERNET) += ar231x.o
+ obj-$(CONFIG_MIPS_SIM_NET) += mipsnet.o
+ obj-$(CONFIG_SGI_IOC3_ETH) += ioc3-eth.o
+ obj-$(CONFIG_DECLANCE) += declance.o
+--- /dev/null
++++ b/drivers/net/ar231x.c
+@@ -0,0 +1,1263 @@
++/*
++ * ar231x.c: Linux driver for the Atheros AR231x Ethernet device.
++ *
++ * Copyright (C) 2004 by Sameer Dekate <sdekate@arubanetworks.com>
++ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
++ * Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org>
++ *
++ * Thanks to Atheros for providing hardware and documentation
++ * enabling me to write this driver.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * Additional credits:
++ * This code is taken from John Taylor's Sibyte driver and then
++ * modified for the AR2313.
++ */
++
++#include <linux/module.h>
++#include <linux/version.h>
++#include <linux/types.h>
++#include <linux/errno.h>
++#include <linux/ioport.h>
++#include <linux/pci.h>
++#include <linux/netdevice.h>
++#include <linux/etherdevice.h>
++#include <linux/skbuff.h>
++#include <linux/init.h>
++#include <linux/delay.h>
++#include <linux/mm.h>
++#include <linux/highmem.h>
++#include <linux/sockios.h>
++#include <linux/pkt_sched.h>
++#include <linux/mii.h>
++#include <linux/phy.h>
++#include <linux/ethtool.h>
++#include <linux/ctype.h>
++#include <linux/platform_device.h>
++
++#include <net/sock.h>
++#include <net/ip.h>
++
++#include <asm/system.h>
++#include <asm/io.h>
++#include <asm/irq.h>
++#include <asm/byteorder.h>
++#include <asm/uaccess.h>
++#include <asm/bootinfo.h>
++
++#define AR2313_MTU 1692
++#define AR2313_PRIOS 1
++#define AR2313_QUEUES (2*AR2313_PRIOS)
++#define AR2313_DESCR_ENTRIES 64
++
++
++#ifndef min
++#define min(a,b) (((a)<(b))?(a):(b))
++#endif
++
++#ifndef SMP_CACHE_BYTES
++#define SMP_CACHE_BYTES L1_CACHE_BYTES
++#endif
++
++#define AR2313_MBOX_SET_BIT 0x8
++
++#include "ar231x.h"
++
++/*
++ * New interrupt handler strategy:
++ *
++ * An old interrupt handler worked using the traditional method of
++ * replacing an skbuff with a new one when a packet arrives. However
++ * the rx rings do not need to contain a static number of buffer
++ * descriptors, thus it makes sense to move the memory allocation out
++ * of the main interrupt handler and do it in a bottom half handler
++ * and only allocate new buffers when the number of buffers in the
++ * ring is below a certain threshold. In order to avoid starving the
++ * NIC under heavy load it is however necessary to force allocation
++ * when hitting a minimum threshold. The strategy for alloction is as
++ * follows:
++ *
++ * RX_LOW_BUF_THRES - allocate buffers in the bottom half
++ * RX_PANIC_LOW_THRES - we are very low on buffers, allocate
++ * the buffers in the interrupt handler
++ * RX_RING_THRES - maximum number of buffers in the rx ring
++ *
++ * One advantagous side effect of this allocation approach is that the
++ * entire rx processing can be done without holding any spin lock
++ * since the rx rings and registers are totally independent of the tx
++ * ring and its registers. This of course includes the kmalloc's of
++ * new skb's. Thus start_xmit can run in parallel with rx processing
++ * and the memory allocation on SMP systems.
++ *
++ * Note that running the skb reallocation in a bottom half opens up
++ * another can of races which needs to be handled properly. In
++ * particular it can happen that the interrupt handler tries to run
++ * the reallocation while the bottom half is either running on another
++ * CPU or was interrupted on the same CPU. To get around this the
++ * driver uses bitops to prevent the reallocation routines from being
++ * reentered.
++ *
++ * TX handling can also be done without holding any spin lock, wheee
++ * this is fun! since tx_csm is only written to by the interrupt
++ * handler.
++ */
++
++/*
++ * Threshold values for RX buffer allocation - the low water marks for
++ * when to start refilling the rings are set to 75% of the ring
++ * sizes. It seems to make sense to refill the rings entirely from the
++ * intrrupt handler once it gets below the panic threshold, that way
++ * we don't risk that the refilling is moved to another CPU when the
++ * one running the interrupt handler just got the slab code hot in its
++ * cache.
++ */
++#define RX_RING_SIZE AR2313_DESCR_ENTRIES
++#define RX_PANIC_THRES (RX_RING_SIZE/4)
++#define RX_LOW_THRES ((3*RX_RING_SIZE)/4)
++#define CRC_LEN 4
++#define RX_OFFSET 2
++
++#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
++#define VLAN_HDR 4
++#else
++#define VLAN_HDR 0
++#endif
++
++#define AR2313_BUFSIZE (AR2313_MTU + VLAN_HDR + ETH_HLEN + CRC_LEN + RX_OFFSET)
++
++#ifdef MODULE
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Sameer Dekate <sdekate@arubanetworks.com>, Imre Kaloz <kaloz@openwrt.org>, Felix Fietkau <nbd@openwrt.org>");
++MODULE_DESCRIPTION("AR231x Ethernet driver");
++#endif
++
++#define virt_to_phys(x) ((u32)(x) & 0x1fffffff)
++
++// prototypes
++static void ar231x_halt(struct net_device *dev);
++static void rx_tasklet_func(unsigned long data);
++static void rx_tasklet_cleanup(struct net_device *dev);
++static void ar231x_multicast_list(struct net_device *dev);
++
++static int ar231x_mdiobus_read(struct mii_bus *bus, int phy_addr, int regnum);
++static int ar231x_mdiobus_write(struct mii_bus *bus, int phy_addr, int regnum, u16 value);
++static int ar231x_mdiobus_reset(struct mii_bus *bus);
++static int ar231x_mdiobus_probe (struct net_device *dev);
++static void ar231x_adjust_link(struct net_device *dev);
++
++#ifndef ERR
++#define ERR(fmt, args...) printk("%s: " fmt, __func__, ##args)
++#endif
++
++static const struct net_device_ops ar231x_ops = {
++ .ndo_open = ar231x_open,
++ .ndo_stop = ar231x_close,
++ .ndo_start_xmit = ar231x_start_xmit,
++ .ndo_set_multicast_list = ar231x_multicast_list,
++ .ndo_do_ioctl = ar231x_ioctl,
++};
++
++int __init ar231x_probe(struct platform_device *pdev)
++{
++ struct net_device *dev;
++ struct ar231x_private *sp;
++ struct resource *res;
++ unsigned long ar_eth_base;
++ char buf[64];
++
++ dev = alloc_etherdev(sizeof(struct ar231x_private));
++
++ if (dev == NULL) {
++ printk(KERN_ERR
++ "ar231x: Unable to allocate net_device structure!\n");
++ return -ENOMEM;
++ }
++
++ platform_set_drvdata(pdev, dev);
++
++ sp = netdev_priv(dev);
++ sp->dev = dev;
++ sp->cfg = pdev->dev.platform_data;
++
++ sprintf(buf, "eth%d_membase", pdev->id);
++ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, buf);
++ if (!res)
++ return -ENODEV;
++
++ sp->link = 0;
++ ar_eth_base = res->start;
++
++ sprintf(buf, "eth%d_irq", pdev->id);
++ dev->irq = platform_get_irq_byname(pdev, buf);
++
++ spin_lock_init(&sp->lock);
++
++ dev->features |= NETIF_F_HIGHDMA;
++ dev->netdev_ops = &ar231x_ops;
++
++ tasklet_init(&sp->rx_tasklet, rx_tasklet_func, (unsigned long) dev);
++ tasklet_disable(&sp->rx_tasklet);
++
++ sp->eth_regs =
++ ioremap_nocache(virt_to_phys(ar_eth_base), sizeof(*sp->eth_regs));
++ if (!sp->eth_regs) {
++ printk("Can't remap eth registers\n");
++ return (-ENXIO);
++ }
++
++ /*
++ * When there's only one MAC, PHY regs are typically on ENET0,
++ * even though the MAC might be on ENET1.
++ * Needto remap PHY regs separately in this case
++ */
++ if (virt_to_phys(ar_eth_base) == virt_to_phys(sp->phy_regs))
++ sp->phy_regs = sp->eth_regs;
++ else {
++ sp->phy_regs =
++ ioremap_nocache(virt_to_phys(sp->cfg->phy_base),
++ sizeof(*sp->phy_regs));
++ if (!sp->phy_regs) {
++ printk("Can't remap phy registers\n");
++ return (-ENXIO);
++ }
++ }
++
++ sp->dma_regs =
++ ioremap_nocache(virt_to_phys(ar_eth_base + 0x1000),
++ sizeof(*sp->dma_regs));
++ dev->base_addr = (unsigned int) sp->dma_regs;
++ if (!sp->dma_regs) {
++ printk("Can't remap DMA registers\n");
++ return (-ENXIO);
++ }
++
++ sp->int_regs = ioremap_nocache(virt_to_phys(sp->cfg->reset_base), 4);
++ if (!sp->int_regs) {
++ printk("Can't remap INTERRUPT registers\n");
++ return (-ENXIO);
++ }
++
++ strncpy(sp->name, "Atheros AR231x", sizeof(sp->name) - 1);
++ sp->name[sizeof(sp->name) - 1] = '\0';
++ memcpy(dev->dev_addr, sp->cfg->macaddr, 6);
++
++ if (ar231x_init(dev)) {
++ /*
++ * ar231x_init() calls ar231x_init_cleanup() on error.
++ */
++ kfree(dev);
++ return -ENODEV;
++ }
++
++ if (register_netdev(dev)) {
++ printk("%s: register_netdev failed\n", __func__);
++ return -1;
++ }
++
++ printk("%s: %s: %02x:%02x:%02x:%02x:%02x:%02x, irq %d\n",
++ dev->name, sp->name,
++ dev->dev_addr[0], dev->dev_addr[1], dev->dev_addr[2],
++ dev->dev_addr[3], dev->dev_addr[4], dev->dev_addr[5], dev->irq);
++
++ sp->mii_bus = mdiobus_alloc();
++ if (sp->mii_bus == NULL)
++ return -1;
++
++ sp->mii_bus->priv = dev;
++ sp->mii_bus->read = ar231x_mdiobus_read;
++ sp->mii_bus->write = ar231x_mdiobus_write;
++ sp->mii_bus->reset = ar231x_mdiobus_reset;
++ sp->mii_bus->name = "ar231x_eth_mii";
++ snprintf(sp->mii_bus->id, MII_BUS_ID_SIZE, "%d", pdev->id);
++ sp->mii_bus->irq = kmalloc(sizeof(int), GFP_KERNEL);
++ *sp->mii_bus->irq = PHY_POLL;
++
++ mdiobus_register(sp->mii_bus);
++
++ if (ar231x_mdiobus_probe(dev) != 0) {
++ printk(KERN_ERR "%s: mdiobus_probe failed\n", dev->name);
++ rx_tasklet_cleanup(dev);
++ ar231x_init_cleanup(dev);
++ unregister_netdev(dev);
++ kfree(dev);
++ return -ENODEV;
++ }
++
++ /* start link poll timer */
++ ar231x_setup_timer(dev);
++
++ return 0;
++}
++
++
++static void ar231x_multicast_list(struct net_device *dev)
++{
++ struct ar231x_private *sp = netdev_priv(dev);
++ unsigned int filter;
++
++ filter = sp->eth_regs->mac_control;
++
++ if (dev->flags & IFF_PROMISC)
++ filter |= MAC_CONTROL_PR;
++ else
++ filter &= ~MAC_CONTROL_PR;
++ if ((dev->flags & IFF_ALLMULTI) || (dev->mc_count > 0))
++ filter |= MAC_CONTROL_PM;
++ else
++ filter &= ~MAC_CONTROL_PM;
++
++ sp->eth_regs->mac_control = filter;
++}
++
++static void rx_tasklet_cleanup(struct net_device *dev)
++{
++ struct ar231x_private *sp = netdev_priv(dev);
++
++ /*
++ * Tasklet may be scheduled. Need to get it removed from the list
++ * since we're about to free the struct.
++ */
++
++ sp->unloading = 1;
++ tasklet_enable(&sp->rx_tasklet);
++ tasklet_kill(&sp->rx_tasklet);
++}
++
++static int __devexit ar231x_remove(struct platform_device *pdev)
++{
++ struct net_device *dev = platform_get_drvdata(pdev);
++ struct ar231x_private *sp = netdev_priv(dev);
++ rx_tasklet_cleanup(dev);
++ ar231x_init_cleanup(dev);
++ unregister_netdev(dev);
++ mdiobus_unregister(sp->mii_bus);
++ mdiobus_free(sp->mii_bus);
++ kfree(dev);
++ return 0;
++}
++
++
++/*
++ * Restart the AR2313 ethernet controller.
++ */
++static int ar231x_restart(struct net_device *dev)
++{
++ /* disable interrupts */
++ disable_irq(dev->irq);
++
++ /* stop mac */
++ ar231x_halt(dev);
++
++ /* initialize */
++ ar231x_init(dev);
++
++ /* enable interrupts */
++ enable_irq(dev->irq);
++
++ return 0;
++}
++
++static struct platform_driver ar231x_driver = {
++ .driver.name = "ar231x-eth",
++ .probe = ar231x_probe,
++ .remove = __devexit_p(ar231x_remove),
++};
++
++int __init ar231x_module_init(void)
++{
++ return platform_driver_register(&ar231x_driver);
++}
++
++void __exit ar231x_module_cleanup(void)
++{
++ platform_driver_unregister(&ar231x_driver);
++}
++
++module_init(ar231x_module_init);
++module_exit(ar231x_module_cleanup);
++
++
++static void ar231x_free_descriptors(struct net_device *dev)
++{
++ struct ar231x_private *sp = netdev_priv(dev);
++ if (sp->rx_ring != NULL) {
++ kfree((void *) KSEG0ADDR(sp->rx_ring));
++ sp->rx_ring = NULL;
++ sp->tx_ring = NULL;
++ }
++}
++
++
++static int ar231x_allocate_descriptors(struct net_device *dev)
++{
++ struct ar231x_private *sp = netdev_priv(dev);
++ int size;
++ int j;
++ ar231x_descr_t *space;
++
++ if (sp->rx_ring != NULL) {
++ printk("%s: already done.\n", __FUNCTION__);
++ return 0;
++ }
++
++ size =
++ (sizeof(ar231x_descr_t) * (AR2313_DESCR_ENTRIES * AR2313_QUEUES));
++ space = kmalloc(size, GFP_KERNEL);
++ if (space == NULL)
++ return 1;
++
++ /* invalidate caches */
++ dma_cache_inv((unsigned int) space, size);
++
++ /* now convert pointer to KSEG1 */
++ space = (ar231x_descr_t *) KSEG1ADDR(space);
++
++ memset((void *) space, 0, size);
++
++ sp->rx_ring = space;
++ space += AR2313_DESCR_ENTRIES;
++
++ sp->tx_ring = space;
++ space += AR2313_DESCR_ENTRIES;
++
++ /* Initialize the transmit Descriptors */
++ for (j = 0; j < AR2313_DESCR_ENTRIES; j++) {
++ ar231x_descr_t *td = &sp->tx_ring[j];
++ td->status = 0;
++ td->devcs = DMA_TX1_CHAINED;
++ td->addr = 0;
++ td->descr =
++ virt_to_phys(&sp->
++ tx_ring[(j + 1) & (AR2313_DESCR_ENTRIES - 1)]);
++ }
++
++ return 0;
++}
++
++
++/*
++ * Generic cleanup handling data allocated during init. Used when the
++ * module is unloaded or if an error occurs during initialization
++ */
++static void ar231x_init_cleanup(struct net_device *dev)
++{
++ struct ar231x_private *sp = netdev_priv(dev);
++ struct sk_buff *skb;
++ int j;
++
++ ar231x_free_descriptors(dev);
++
++ if (sp->eth_regs)
++ iounmap((void *) sp->eth_regs);
++ if (sp->dma_regs)
++ iounmap((void *) sp->dma_regs);
++
++ if (sp->rx_skb) {
++ for (j = 0; j < AR2313_DESCR_ENTRIES; j++) {
++ skb = sp->rx_skb[j];
++ if (skb) {
++ sp->rx_skb[j] = NULL;
++ dev_kfree_skb(skb);
++ }
++ }
++ kfree(sp->rx_skb);
++ sp->rx_skb = NULL;
++ }
++
++ if (sp->tx_skb) {
++ for (j = 0; j < AR2313_DESCR_ENTRIES; j++) {
++ skb = sp->tx_skb[j];
++ if (skb) {
++ sp->tx_skb[j] = NULL;
++ dev_kfree_skb(skb);
++ }
++ }
++ kfree(sp->tx_skb);
++ sp->tx_skb = NULL;
++ }
++}
++
++static int ar231x_setup_timer(struct net_device *dev)
++{
++ struct ar231x_private *sp = netdev_priv(dev);
++
++ init_timer(&sp->link_timer);
++
++ sp->link_timer.function = ar231x_link_timer_fn;
++ sp->link_timer.data = (int) dev;
++ sp->link_timer.expires = jiffies + HZ;
++
++ add_timer(&sp->link_timer);
++ return 0;
++
++}
++
++static void ar231x_link_timer_fn(unsigned long data)
++{
++ struct net_device *dev = (struct net_device *) data;
++ struct ar231x_private *sp = netdev_priv(dev);
++
++ // see if the link status changed
++ // This was needed to make sure we set the PHY to the
++ // autonegotiated value of half or full duplex.
++ ar231x_check_link(dev);
++
++ // Loop faster when we don't have link.
++ // This was needed to speed up the AP bootstrap time.
++ if (sp->link == 0) {
++ mod_timer(&sp->link_timer, jiffies + HZ / 2);
++ } else {
++ mod_timer(&sp->link_timer, jiffies + LINK_TIMER);
++ }
++}
++
++static void ar231x_check_link(struct net_device *dev)
++{
++ struct ar231x_private *sp = netdev_priv(dev);
++ u16 phyData;
++
++ phyData = ar231x_mdiobus_read(sp->mii_bus, sp->phy, MII_BMSR);
++ if (sp->phyData != phyData) {
++ if (phyData & BMSR_LSTATUS) {
++ /* link is present, ready link partner ability to deterine
++ duplexity */
++ int duplex = 0;
++ u16 reg;
++
++ sp->link = 1;
++ reg = ar231x_mdiobus_read(sp->mii_bus, sp->phy, MII_BMCR);
++ if (reg & BMCR_ANENABLE) {
++ /* auto neg enabled */
++ reg = ar231x_mdiobus_read(sp->mii_bus, sp->phy, MII_LPA);
++ duplex = (reg & (LPA_100FULL | LPA_10FULL)) ? 1 : 0;
++ } else {
++ /* no auto neg, just read duplex config */
++ duplex = (reg & BMCR_FULLDPLX) ? 1 : 0;
++ }
++
++ printk(KERN_INFO "%s: Configuring MAC for %s duplex\n",
++ dev->name, (duplex) ? "full" : "half");
++
++ if (duplex) {
++ /* full duplex */
++ sp->eth_regs->mac_control =
++ ((sp->eth_regs->
++ mac_control | MAC_CONTROL_F) & ~MAC_CONTROL_DRO);
++ } else {
++ /* half duplex */
++ sp->eth_regs->mac_control =
++ ((sp->eth_regs->
++ mac_control | MAC_CONTROL_DRO) & ~MAC_CONTROL_F);
++ }
++ } else {
++ /* no link */
++ sp->link = 0;
++ }
++ sp->phyData = phyData;
++ }
++}
++
++static int ar231x_reset_reg(struct net_device *dev)
++{
++ struct ar231x_private *sp = netdev_priv(dev);
++ unsigned int ethsal, ethsah;
++ unsigned int flags;
++
++ *sp->int_regs |= sp->cfg->reset_mac;
++ mdelay(10);
++ *sp->int_regs &= ~sp->cfg->reset_mac;
++ mdelay(10);
++ *sp->int_regs |= sp->cfg->reset_phy;
++ mdelay(10);
++ *sp->int_regs &= ~sp->cfg->reset_phy;
++ mdelay(10);
++
++ sp->dma_regs->bus_mode = (DMA_BUS_MODE_SWR);
++ mdelay(10);
++ sp->dma_regs->bus_mode =
++ ((32 << DMA_BUS_MODE_PBL_SHIFT) | DMA_BUS_MODE_BLE);
++
++ /* enable interrupts */
++ sp->dma_regs->intr_ena = (DMA_STATUS_AIS |
++ DMA_STATUS_NIS |
++ DMA_STATUS_RI |
++ DMA_STATUS_TI | DMA_STATUS_FBE);
++ sp->dma_regs->xmt_base = virt_to_phys(sp->tx_ring);
++ sp->dma_regs->rcv_base = virt_to_phys(sp->rx_ring);
++ sp->dma_regs->control =
++ (DMA_CONTROL_SR | DMA_CONTROL_ST | DMA_CONTROL_SF);
++
++ sp->eth_regs->flow_control = (FLOW_CONTROL_FCE);
++ sp->eth_regs->vlan_tag = (0x8100);
++
++ /* Enable Ethernet Interface */
++ flags = (MAC_CONTROL_TE | /* transmit enable */
++ MAC_CONTROL_PM | /* pass mcast */
++ MAC_CONTROL_F | /* full duplex */
++ MAC_CONTROL_HBD); /* heart beat disabled */
++
++ if (dev->flags & IFF_PROMISC) { /* set promiscuous mode */
++ flags |= MAC_CONTROL_PR;
++ }
++ sp->eth_regs->mac_control = flags;
++
++ /* Set all Ethernet station address registers to their initial values */
++ ethsah = ((((u_int) (dev->dev_addr[5]) << 8) & (u_int) 0x0000FF00) |
++ (((u_int) (dev->dev_addr[4]) << 0) & (u_int) 0x000000FF));
++
++ ethsal = ((((u_int) (dev->dev_addr[3]) << 24) & (u_int) 0xFF000000) |
++ (((u_int) (dev->dev_addr[2]) << 16) & (u_int) 0x00FF0000) |
++ (((u_int) (dev->dev_addr[1]) << 8) & (u_int) 0x0000FF00) |
++ (((u_int) (dev->dev_addr[0]) << 0) & (u_int) 0x000000FF));
++
++ sp->eth_regs->mac_addr[0] = ethsah;
++ sp->eth_regs->mac_addr[1] = ethsal;
++
++ mdelay(10);
++
++ return (0);
++}
++
++
++static int ar231x_init(struct net_device *dev)
++{
++ struct ar231x_private *sp = netdev_priv(dev);
++ int ecode = 0;
++
++ /*
++ * Allocate descriptors
++ */
++ if (ar231x_allocate_descriptors(dev)) {
++ printk("%s: %s: ar231x_allocate_descriptors failed\n",
++ dev->name, __FUNCTION__);
++ ecode = -EAGAIN;
++ goto init_error;
++ }
++
++ /*
++ * Get the memory for the skb rings.
++ */
++ if (sp->rx_skb == NULL) {
++ sp->rx_skb =
++ kmalloc(sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES,
++ GFP_KERNEL);
++ if (!(sp->rx_skb)) {
++ printk("%s: %s: rx_skb kmalloc failed\n",
++ dev->name, __FUNCTION__);
++ ecode = -EAGAIN;
++ goto init_error;
++ }
++ }
++ memset(sp->rx_skb, 0, sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES);
++
++ if (sp->tx_skb == NULL) {
++ sp->tx_skb =
++ kmalloc(sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES,
++ GFP_KERNEL);
++ if (!(sp->tx_skb)) {
++ printk("%s: %s: tx_skb kmalloc failed\n",
++ dev->name, __FUNCTION__);
++ ecode = -EAGAIN;
++ goto init_error;
++ }
++ }
++ memset(sp->tx_skb, 0, sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES);
++
++ /*
++ * Set tx_csm before we start receiving interrupts, otherwise
++ * the interrupt handler might think it is supposed to process
++ * tx ints before we are up and running, which may cause a null
++ * pointer access in the int handler.
++ */
++ sp->rx_skbprd = 0;
++ sp->cur_rx = 0;
++ sp->tx_prd = 0;
++ sp->tx_csm = 0;
++
++ /*
++ * Zero the stats before starting the interface
++ */
++ memset(&dev->stats, 0, sizeof(dev->stats));
++
++ /*
++ * We load the ring here as there seem to be no way to tell the
++ * firmware to wipe the ring without re-initializing it.
++ */
++ ar231x_load_rx_ring(dev, RX_RING_SIZE);
++
++ /*
++ * Init hardware
++ */
++ ar231x_reset_reg(dev);
++
++ /*
++ * Get the IRQ
++ */
++ ecode =
++ request_irq(dev->irq, &ar231x_interrupt,
++ IRQF_DISABLED | IRQF_SAMPLE_RANDOM,
++ dev->name, dev);
++ if (ecode) {
++ printk(KERN_WARNING "%s: %s: Requested IRQ %d is busy\n",
++ dev->name, __FUNCTION__, dev->irq);
++ goto init_error;
++ }
++
++
++ tasklet_enable(&sp->rx_tasklet);
++
++ return 0;
++
++ init_error:
++ ar231x_init_cleanup(dev);
++ return ecode;
++}
++
++/*
++ * Load the rx ring.
++ *
++ * Loading rings is safe without holding the spin lock since this is
++ * done only before the device is enabled, thus no interrupts are
++ * generated and by the interrupt handler/tasklet handler.
++ */
++static void ar231x_load_rx_ring(struct net_device *dev, int nr_bufs)
++{
++
++ struct ar231x_private *sp = netdev_priv(dev);
++ short i, idx;
++
++ idx = sp->rx_skbprd;
++
++ for (i = 0; i < nr_bufs; i++) {
++ struct sk_buff *skb;
++ ar231x_descr_t *rd;
++
++ if (sp->rx_skb[idx])
++ break;
++
++ skb = netdev_alloc_skb(dev, AR2313_BUFSIZE);
++ if (!skb) {
++ printk("\n\n\n\n %s: No memory in system\n\n\n\n",
++ __FUNCTION__);
++ break;
++ }
++
++ /*
++ * Make sure IP header starts on a fresh cache line.
++ */
++ skb->dev = dev;
++ skb_reserve(skb, RX_OFFSET);
++ sp->rx_skb[idx] = skb;
++
++ rd = (ar231x_descr_t *) & sp->rx_ring[idx];
++
++ /* initialize dma descriptor */
++ rd->devcs = ((AR2313_BUFSIZE << DMA_RX1_BSIZE_SHIFT) |
++ DMA_RX1_CHAINED);
++ rd->addr = virt_to_phys(skb->data);
++ rd->descr =
++ virt_to_phys(&sp->
++ rx_ring[(idx + 1) & (AR2313_DESCR_ENTRIES - 1)]);
++ rd->status = DMA_RX_OWN;
++
++ idx = DSC_NEXT(idx);
++ }
++
++ if (i)
++ sp->rx_skbprd = idx;
++
++ return;
++}
++
++#define AR2313_MAX_PKTS_PER_CALL 64
++
++static int ar231x_rx_int(struct net_device *dev)
++{
++ struct ar231x_private *sp = netdev_priv(dev);
++ struct sk_buff *skb, *skb_new;
++ ar231x_descr_t *rxdesc;
++ unsigned int status;
++ u32 idx;
++ int pkts = 0;
++ int rval;
++
++ idx = sp->cur_rx;
++
++ /* process at most the entire ring and then wait for another interrupt
++ */
++ while (1) {
++
++ rxdesc = &sp->rx_ring[idx];
++ status = rxdesc->status;
++ if (status & DMA_RX_OWN) {
++ /* SiByte owns descriptor or descr not yet filled in */
++ rval = 0;
++ break;
++ }
++
++ if (++pkts > AR2313_MAX_PKTS_PER_CALL) {
++ rval = 1;
++ break;
++ }
++
++ if ((status & DMA_RX_ERROR) && !(status & DMA_RX_LONG)) {
++ dev->stats.rx_errors++;
++ dev->stats.rx_dropped++;
++
++ /* add statistics counters */
++ if (status & DMA_RX_ERR_CRC)
++ dev->stats.rx_crc_errors++;
++ if (status & DMA_RX_ERR_COL)
++ dev->stats.rx_over_errors++;
++ if (status & DMA_RX_ERR_LENGTH)
++ dev->stats.rx_length_errors++;
++ if (status & DMA_RX_ERR_RUNT)
++ dev->stats.rx_over_errors++;
++ if (status & DMA_RX_ERR_DESC)
++ dev->stats.rx_over_errors++;
++
++ } else {
++ /* alloc new buffer. */
++ skb_new = netdev_alloc_skb(dev, AR2313_BUFSIZE + RX_OFFSET);
++ if (skb_new != NULL) {
++
++ skb = sp->rx_skb[idx];
++ /* set skb */
++ skb_put(skb,
++ ((status >> DMA_RX_LEN_SHIFT) & 0x3fff) - CRC_LEN);
++
++ dev->stats.rx_bytes += skb->len;
++ skb->protocol = eth_type_trans(skb, dev);
++ /* pass the packet to upper layers */
++ netif_rx(skb);
++
++ skb_new->dev = dev;
++ /* 16 bit align */
++ skb_reserve(skb_new, RX_OFFSET);
++ /* reset descriptor's curr_addr */
++ rxdesc->addr = virt_to_phys(skb_new->data);
++
++ dev->stats.rx_packets++;
++ sp->rx_skb[idx] = skb_new;
++ } else {
++ dev->stats.rx_dropped++;
++ }
++ }
++
++ rxdesc->devcs = ((AR2313_BUFSIZE << DMA_RX1_BSIZE_SHIFT) |
++ DMA_RX1_CHAINED);
++ rxdesc->status = DMA_RX_OWN;
++
++ idx = DSC_NEXT(idx);
++ }
++
++ sp->cur_rx = idx;
++
++ return rval;
++}
++
++
++static void ar231x_tx_int(struct net_device *dev)
++{
++ struct ar231x_private *sp = netdev_priv(dev);
++ u32 idx;
++ struct sk_buff *skb;
++ ar231x_descr_t *txdesc;
++ unsigned int status = 0;
++
++ idx = sp->tx_csm;
++
++ while (idx != sp->tx_prd) {
++ txdesc = &sp->tx_ring[idx];
++
++ if ((status = txdesc->status) & DMA_TX_OWN) {
++ /* ar231x dma still owns descr */
++ break;
++ }
++ /* done with this descriptor */
++ dma_unmap_single(NULL, txdesc->addr,
++ txdesc->devcs & DMA_TX1_BSIZE_MASK,
++ DMA_TO_DEVICE);
++ txdesc->status = 0;
++
++ if (status & DMA_TX_ERROR) {
++ dev->stats.tx_errors++;
++ dev->stats.tx_dropped++;
++ if (status & DMA_TX_ERR_UNDER)
++ dev->stats.tx_fifo_errors++;
++ if (status & DMA_TX_ERR_HB)
++ dev->stats.tx_heartbeat_errors++;
++ if (status & (DMA_TX_ERR_LOSS | DMA_TX_ERR_LINK))
++ dev->stats.tx_carrier_errors++;
++ if (status & (DMA_TX_ERR_LATE |
++ DMA_TX_ERR_COL |
++ DMA_TX_ERR_JABBER | DMA_TX_ERR_DEFER))
++ dev->stats.tx_aborted_errors++;
++ } else {
++ /* transmit OK */
++ dev->stats.tx_packets++;
++ }
++
++ skb = sp->tx_skb[idx];
++ sp->tx_skb[idx] = NULL;
++ idx = DSC_NEXT(idx);
++ dev->stats.tx_bytes += skb->len;
++ dev_kfree_skb_irq(skb);
++ }
++
++ sp->tx_csm = idx;
++
++ return;
++}
++
++
++static void rx_tasklet_func(unsigned long data)
++{
++ struct net_device *dev = (struct net_device *) data;
++ struct ar231x_private *sp = netdev_priv(dev);
++
++ if (sp->unloading) {
++ return;
++ }
++
++ if (ar231x_rx_int(dev)) {
++ tasklet_hi_schedule(&sp->rx_tasklet);
++ } else {
++ unsigned long flags;
++ spin_lock_irqsave(&sp->lock, flags);
++ sp->dma_regs->intr_ena |= DMA_STATUS_RI;
++ spin_unlock_irqrestore(&sp->lock, flags);
++ }
++}
++
++static void rx_schedule(struct net_device *dev)
++{
++ struct ar231x_private *sp = netdev_priv(dev);
++
++ sp->dma_regs->intr_ena &= ~DMA_STATUS_RI;
++
++ tasklet_hi_schedule(&sp->rx_tasklet);
++}
++
++static irqreturn_t ar231x_interrupt(int irq, void *dev_id)
++{
++ struct net_device *dev = (struct net_device *) dev_id;
++ struct ar231x_private *sp = netdev_priv(dev);
++ unsigned int status, enabled;
++
++ /* clear interrupt */
++ /*
++ * Don't clear RI bit if currently disabled.
++ */
++ status = sp->dma_regs->status;
++ enabled = sp->dma_regs->intr_ena;
++ sp->dma_regs->status = status & enabled;
++
++ if (status & DMA_STATUS_NIS) {
++ /* normal status */
++ /*
++ * Don't schedule rx processing if interrupt
++ * is already disabled.
++ */
++ if (status & enabled & DMA_STATUS_RI) {
++ /* receive interrupt */
++ rx_schedule(dev);
++ }
++ if (status & DMA_STATUS_TI) {
++ /* transmit interrupt */
++ ar231x_tx_int(dev);
++ }
++ }
++
++ /* abnormal status */
++ if (status & (DMA_STATUS_FBE | DMA_STATUS_TPS)) {
++ ar231x_restart(dev);
++ }
++ return IRQ_HANDLED;
++}
++
++
++static int ar231x_open(struct net_device *dev)
++{
++ struct ar231x_private *sp = netdev_priv(dev);
++ unsigned int ethsal, ethsah;
++
++ /* reset the hardware, in case the MAC address changed */
++ ethsah = ((((u_int) (dev->dev_addr[5]) << 8) & (u_int) 0x0000FF00) |
++ (((u_int) (dev->dev_addr[4]) << 0) & (u_int) 0x000000FF));
++
++ ethsal = ((((u_int) (dev->dev_addr[3]) << 24) & (u_int) 0xFF000000) |
++ (((u_int) (dev->dev_addr[2]) << 16) & (u_int) 0x00FF0000) |
++ (((u_int) (dev->dev_addr[1]) << 8) & (u_int) 0x0000FF00) |
++ (((u_int) (dev->dev_addr[0]) << 0) & (u_int) 0x000000FF));
++
++ sp->eth_regs->mac_addr[0] = ethsah;
++ sp->eth_regs->mac_addr[1] = ethsal;
++
++ mdelay(10);
++
++ dev->mtu = 1500;
++ netif_start_queue(dev);
++
++ sp->eth_regs->mac_control |= MAC_CONTROL_RE;
++
++ return 0;
++}
++
++static void ar231x_halt(struct net_device *dev)
++{
++ struct ar231x_private *sp = netdev_priv(dev);
++ int j;
++
++ tasklet_disable(&sp->rx_tasklet);
++
++ /* kill the MAC */
++ sp->eth_regs->mac_control &= ~(MAC_CONTROL_RE | /* disable Receives */
++ MAC_CONTROL_TE); /* disable Transmits */
++ /* stop dma */
++ sp->dma_regs->control = 0;
++ sp->dma_regs->bus_mode = DMA_BUS_MODE_SWR;
++
++ /* place phy and MAC in reset */
++ *sp->int_regs |= (sp->cfg->reset_mac | sp->cfg->reset_phy);
++
++ /* free buffers on tx ring */
++ for (j = 0; j < AR2313_DESCR_ENTRIES; j++) {
++ struct sk_buff *skb;
++ ar231x_descr_t *txdesc;
++
++ txdesc = &sp->tx_ring[j];
++ txdesc->descr = 0;
++
++ skb = sp->tx_skb[j];
++ if (skb) {
++ dev_kfree_skb(skb);
++ sp->tx_skb[j] = NULL;
++ }
++ }
++}
++
++/*
++ * close should do nothing. Here's why. It's called when
++ * 'ifconfig bond0 down' is run. If it calls free_irq then
++ * the irq is gone forever ! When bond0 is made 'up' again,
++ * the ar231x_open () does not call request_irq (). Worse,
++ * the call to ar231x_halt() generates a WDOG reset due to
++ * the write to 'sp->int_regs' and the box reboots.
++ * Commenting this out is good since it allows the
++ * system to resume when bond0 is made up again.
++ */
++static int ar231x_close(struct net_device *dev)
++{
++#if 0
++ /*
++ * Disable interrupts
++ */
++ disable_irq(dev->irq);
++
++ /*
++ * Without (or before) releasing irq and stopping hardware, this
++ * is an absolute non-sense, by the way. It will be reset instantly
++ * by the first irq.
++ */
++ netif_stop_queue(dev);
++
++ /* stop the MAC and DMA engines */
++ ar231x_halt(dev);
++
++ /* release the interrupt */
++ free_irq(dev->irq, dev);
++
++#endif
++ return 0;
++}
++
++static int ar231x_start_xmit(struct sk_buff *skb, struct net_device *dev)
++{
++ struct ar231x_private *sp = netdev_priv(dev);
++ ar231x_descr_t *td;
++ u32 idx;
++
++ idx = sp->tx_prd;
++ td = &sp->tx_ring[idx];
++
++ if (td->status & DMA_TX_OWN) {
++ /* free skbuf and lie to the caller that we sent it out */
++ dev->stats.tx_dropped++;
++ dev_kfree_skb(skb);
++
++ /* restart transmitter in case locked */
++ sp->dma_regs->xmt_poll = 0;
++ return 0;
++ }
++
++ /* Setup the transmit descriptor. */
++ td->devcs = ((skb->len << DMA_TX1_BSIZE_SHIFT) |
++ (DMA_TX1_LS | DMA_TX1_IC | DMA_TX1_CHAINED));
++ td->addr = dma_map_single(NULL, skb->data, skb->len, DMA_TO_DEVICE);
++ td->status = DMA_TX_OWN;
++
++ /* kick transmitter last */
++ sp->dma_regs->xmt_poll = 0;
++
++ sp->tx_skb[idx] = skb;
++ idx = DSC_NEXT(idx);
++ sp->tx_prd = idx;
++
++ return 0;
++}
++
++static int ar231x_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
++{
++ struct mii_ioctl_data *data = (struct mii_ioctl_data *) &ifr->ifr_data;
++ struct ar231x_private *sp = netdev_priv(dev);
++ int ret;
++
++ switch (cmd) {
++
++ case SIOCETHTOOL:
++ spin_lock_irq(&sp->lock);
++ ret = phy_ethtool_ioctl(sp->phy_dev, (void *) ifr->ifr_data);
++ spin_unlock_irq(&sp->lock);
++ return ret;
++
++ case SIOCSIFHWADDR:
++ if (copy_from_user
++ (dev->dev_addr, ifr->ifr_data, sizeof(dev->dev_addr)))
++ return -EFAULT;
++ return 0;
++
++ case SIOCGIFHWADDR:
++ if (copy_to_user
++ (ifr->ifr_data, dev->dev_addr, sizeof(dev->dev_addr)))
++ return -EFAULT;
++ return 0;
++
++ case SIOCGMIIPHY:
++ case SIOCGMIIREG:
++ case SIOCSMIIREG:
++ return phy_mii_ioctl(sp->phy_dev, data, cmd);
++
++ default:
++ break;
++ }
++
++ return -EOPNOTSUPP;
++}
++
++static void ar231x_adjust_link(struct net_device *dev)
++{
++ struct ar231x_private *sp = netdev_priv(dev);
++ unsigned int mc;
++
++ if (!sp->phy_dev->link)
++ return;
++
++ if (sp->phy_dev->duplex != sp->oldduplex) {
++ mc = readl(&sp->eth_regs->mac_control);
++ mc &= ~(MAC_CONTROL_F | MAC_CONTROL_DRO);
++ if (sp->phy_dev->duplex)
++ mc |= MAC_CONTROL_F;
++ else
++ mc |= MAC_CONTROL_DRO;
++ writel(mc, &sp->eth_regs->mac_control);
++ sp->oldduplex = sp->phy_dev->duplex;
++ }
++}
++
++#define MII_ADDR(phy, reg) \
++ ((reg << MII_ADDR_REG_SHIFT) | (phy << MII_ADDR_PHY_SHIFT))
++
++static int
++ar231x_mdiobus_read(struct mii_bus *bus, int phy_addr, int regnum)
++{
++ struct net_device *const dev = bus->priv;
++ struct ar231x_private *sp = netdev_priv(dev);
++ volatile ETHERNET_STRUCT *ethernet = sp->phy_regs;
++
++ ethernet->mii_addr = MII_ADDR(phy_addr, regnum);
++ while (ethernet->mii_addr & MII_ADDR_BUSY);
++ return (ethernet->mii_data >> MII_DATA_SHIFT);
++}
++
++static int
++ar231x_mdiobus_write(struct mii_bus *bus, int phy_addr, int regnum,
++ u16 value)
++{
++ struct net_device *const dev = bus->priv;
++ struct ar231x_private *sp = netdev_priv(dev);
++ volatile ETHERNET_STRUCT *ethernet = sp->phy_regs;
++
++ while (ethernet->mii_addr & MII_ADDR_BUSY);
++ ethernet->mii_data = value << MII_DATA_SHIFT;
++ ethernet->mii_addr = MII_ADDR(phy_addr, regnum) | MII_ADDR_WRITE;
++
++ return 0;
++}
++
++static int ar231x_mdiobus_reset(struct mii_bus *bus)
++{
++ struct net_device *const dev = bus->priv;
++
++ ar231x_reset_reg(dev);
++
++ return 0;
++}
++
++static int ar231x_mdiobus_probe (struct net_device *dev)
++{
++ struct ar231x_private *const sp = netdev_priv(dev);
++ struct phy_device *phydev = NULL;
++ int phy_addr;
++
++ /* find the first (lowest address) PHY on the current MAC's MII bus */
++ for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++)
++ if (sp->mii_bus->phy_map[phy_addr]) {
++ phydev = sp->mii_bus->phy_map[phy_addr];
++ sp->phy = phy_addr;
++ break; /* break out with first one found */
++ }
++
++ if (!phydev) {
++ printk (KERN_ERR "ar231x: %s: no PHY found\n", dev->name);
++ return -1;
++ }
++
++ /* now we are supposed to have a proper phydev, to attach to... */
++ BUG_ON(!phydev);
++ BUG_ON(phydev->attached_dev);
++
++ phydev = phy_connect(dev, dev_name(&phydev->dev), &ar231x_adjust_link, 0,
++ PHY_INTERFACE_MODE_MII);
++
++ if (IS_ERR(phydev)) {
++ printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name);
++ return PTR_ERR(phydev);
++ }
++
++ /* mask with MAC supported features */
++ phydev->supported &= (SUPPORTED_10baseT_Half
++ | SUPPORTED_10baseT_Full
++ | SUPPORTED_100baseT_Half
++ | SUPPORTED_100baseT_Full
++ | SUPPORTED_Autoneg
++ /* | SUPPORTED_Pause | SUPPORTED_Asym_Pause */
++ | SUPPORTED_MII
++ | SUPPORTED_TP);
++
++ phydev->advertising = phydev->supported;
++
++ sp->oldduplex = -1;
++ sp->phy_dev = phydev;
++
++ printk(KERN_INFO "%s: attached PHY driver [%s] "
++ "(mii_bus:phy_addr=%s)\n",
++ dev->name, phydev->drv->name, dev_name(&phydev->dev));
++
++ return 0;
++}
++
+--- /dev/null
++++ b/drivers/net/ar231x.h
+@@ -0,0 +1,302 @@
++/*
++ * ar231x.h: Linux driver for the Atheros AR231x Ethernet device.
++ *
++ * Copyright (C) 2004 by Sameer Dekate <sdekate@arubanetworks.com>
++ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
++ * Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org>
++ *
++ * Thanks to Atheros for providing hardware and documentation
++ * enabling me to write this driver.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++
++#ifndef _AR2313_H_
++#define _AR2313_H_
++
++#include <generated/autoconf.h>
++#include <linux/bitops.h>
++#include <asm/bootinfo.h>
++#include <ar231x_platform.h>
++
++/*
++ * probe link timer - 5 secs
++ */
++#define LINK_TIMER (5*HZ)
++
++#define IS_DMA_TX_INT(X) (((X) & (DMA_STATUS_TI)) != 0)
++#define IS_DMA_RX_INT(X) (((X) & (DMA_STATUS_RI)) != 0)
++#define IS_DRIVER_OWNED(X) (((X) & (DMA_TX_OWN)) == 0)
++
++#define AR2313_TX_TIMEOUT (HZ/4)
++
++/*
++ * Rings
++ */
++#define DSC_RING_ENTRIES_SIZE (AR2313_DESCR_ENTRIES * sizeof(struct desc))
++#define DSC_NEXT(idx) ((idx + 1) & (AR2313_DESCR_ENTRIES - 1))
++
++#define AR2313_MBGET 2
++#define AR2313_MBSET 3
++#define AR2313_PCI_RECONFIG 4
++#define AR2313_PCI_DUMP 5
++#define AR2313_TEST_PANIC 6
++#define AR2313_TEST_NULLPTR 7
++#define AR2313_READ_DATA 8
++#define AR2313_WRITE_DATA 9
++#define AR2313_GET_VERSION 10
++#define AR2313_TEST_HANG 11
++#define AR2313_SYNC 12
++
++#define DMA_RX_ERR_CRC BIT(1)
++#define DMA_RX_ERR_DRIB BIT(2)
++#define DMA_RX_ERR_MII BIT(3)
++#define DMA_RX_EV2 BIT(5)
++#define DMA_RX_ERR_COL BIT(6)
++#define DMA_RX_LONG BIT(7)
++#define DMA_RX_LS BIT(8) /* last descriptor */
++#define DMA_RX_FS BIT(9) /* first descriptor */
++#define DMA_RX_MF BIT(10) /* multicast frame */
++#define DMA_RX_ERR_RUNT BIT(11) /* runt frame */
++#define DMA_RX_ERR_LENGTH BIT(12) /* length error */
++#define DMA_RX_ERR_DESC BIT(14) /* descriptor error */
++#define DMA_RX_ERROR BIT(15) /* error summary */
++#define DMA_RX_LEN_MASK 0x3fff0000
++#define DMA_RX_LEN_SHIFT 16
++#define DMA_RX_FILT BIT(30)
++#define DMA_RX_OWN BIT(31) /* desc owned by DMA controller */
++
++#define DMA_RX1_BSIZE_MASK 0x000007ff
++#define DMA_RX1_BSIZE_SHIFT 0
++#define DMA_RX1_CHAINED BIT(24)
++#define DMA_RX1_RER BIT(25)
++
++#define DMA_TX_ERR_UNDER BIT(1) /* underflow error */
++#define DMA_TX_ERR_DEFER BIT(2) /* excessive deferral */
++#define DMA_TX_COL_MASK 0x78
++#define DMA_TX_COL_SHIFT 3
++#define DMA_TX_ERR_HB BIT(7) /* hearbeat failure */
++#define DMA_TX_ERR_COL BIT(8) /* excessive collisions */
++#define DMA_TX_ERR_LATE BIT(9) /* late collision */
++#define DMA_TX_ERR_LINK BIT(10) /* no carrier */
++#define DMA_TX_ERR_LOSS BIT(11) /* loss of carrier */
++#define DMA_TX_ERR_JABBER BIT(14) /* transmit jabber timeout */
++#define DMA_TX_ERROR BIT(15) /* frame aborted */
++#define DMA_TX_OWN BIT(31) /* descr owned by DMA controller */
++
++#define DMA_TX1_BSIZE_MASK 0x000007ff
++#define DMA_TX1_BSIZE_SHIFT 0
++#define DMA_TX1_CHAINED BIT(24) /* chained descriptors */
++#define DMA_TX1_TER BIT(25) /* transmit end of ring */
++#define DMA_TX1_FS BIT(29) /* first segment */
++#define DMA_TX1_LS BIT(30) /* last segment */
++#define DMA_TX1_IC BIT(31) /* interrupt on completion */
++
++#define RCVPKT_LENGTH(X) (X >> 16) /* Received pkt Length */
++
++#define MAC_CONTROL_RE BIT(2) /* receive enable */
++#define MAC_CONTROL_TE BIT(3) /* transmit enable */
++#define MAC_CONTROL_DC BIT(5) /* Deferral check */
++#define MAC_CONTROL_ASTP BIT(8) /* Auto pad strip */
++#define MAC_CONTROL_DRTY BIT(10) /* Disable retry */
++#define MAC_CONTROL_DBF BIT(11) /* Disable bcast frames */
++#define MAC_CONTROL_LCC BIT(12) /* late collision ctrl */
++#define MAC_CONTROL_HP BIT(13) /* Hash Perfect filtering */
++#define MAC_CONTROL_HASH BIT(14) /* Unicast hash filtering */
++#define MAC_CONTROL_HO BIT(15) /* Hash only filtering */
++#define MAC_CONTROL_PB BIT(16) /* Pass Bad frames */
++#define MAC_CONTROL_IF BIT(17) /* Inverse filtering */
++#define MAC_CONTROL_PR BIT(18) /* promiscuous mode (valid frames only) */
++#define MAC_CONTROL_PM BIT(19) /* pass multicast */
++#define MAC_CONTROL_F BIT(20) /* full-duplex */
++#define MAC_CONTROL_DRO BIT(23) /* Disable Receive Own */
++#define MAC_CONTROL_HBD BIT(28) /* heart-beat disabled (MUST BE SET) */
++#define MAC_CONTROL_BLE BIT(30) /* big endian mode */
++#define MAC_CONTROL_RA BIT(31) /* receive all (valid and invalid frames) */
++
++#define MII_ADDR_BUSY BIT(0)
++#define MII_ADDR_WRITE BIT(1)
++#define MII_ADDR_REG_SHIFT 6
++#define MII_ADDR_PHY_SHIFT 11
++#define MII_DATA_SHIFT 0
++
++#define FLOW_CONTROL_FCE BIT(1)
++
++#define DMA_BUS_MODE_SWR BIT(0) /* software reset */
++#define DMA_BUS_MODE_BLE BIT(7) /* big endian mode */
++#define DMA_BUS_MODE_PBL_SHIFT 8 /* programmable burst length 32 */
++#define DMA_BUS_MODE_DBO BIT(20) /* big-endian descriptors */
++
++#define DMA_STATUS_TI BIT(0) /* transmit interrupt */
++#define DMA_STATUS_TPS BIT(1) /* transmit process stopped */
++#define DMA_STATUS_TU BIT(2) /* transmit buffer unavailable */
++#define DMA_STATUS_TJT BIT(3) /* transmit buffer timeout */
++#define DMA_STATUS_UNF BIT(5) /* transmit underflow */
++#define DMA_STATUS_RI BIT(6) /* receive interrupt */
++#define DMA_STATUS_RU BIT(7) /* receive buffer unavailable */
++#define DMA_STATUS_RPS BIT(8) /* receive process stopped */
++#define DMA_STATUS_ETI BIT(10) /* early transmit interrupt */
++#define DMA_STATUS_FBE BIT(13) /* fatal bus interrupt */
++#define DMA_STATUS_ERI BIT(14) /* early receive interrupt */
++#define DMA_STATUS_AIS BIT(15) /* abnormal interrupt summary */
++#define DMA_STATUS_NIS BIT(16) /* normal interrupt summary */
++#define DMA_STATUS_RS_SHIFT 17 /* receive process state */
++#define DMA_STATUS_TS_SHIFT 20 /* transmit process state */
++#define DMA_STATUS_EB_SHIFT 23 /* error bits */
++
++#define DMA_CONTROL_SR BIT(1) /* start receive */
++#define DMA_CONTROL_ST BIT(13) /* start transmit */
++#define DMA_CONTROL_SF BIT(21) /* store and forward */
++
++
++typedef struct {
++ volatile unsigned int status; // OWN, Device control and status.
++ volatile unsigned int devcs; // pkt Control bits + Length
++ volatile unsigned int addr; // Current Address.
++ volatile unsigned int descr; // Next descriptor in chain.
++} ar231x_descr_t;
++
++
++
++//
++// New Combo structure for Both Eth0 AND eth1
++//
++typedef struct {
++ volatile unsigned int mac_control; /* 0x00 */
++ volatile unsigned int mac_addr[2]; /* 0x04 - 0x08 */
++ volatile unsigned int mcast_table[2]; /* 0x0c - 0x10 */
++ volatile unsigned int mii_addr; /* 0x14 */
++ volatile unsigned int mii_data; /* 0x18 */
++ volatile unsigned int flow_control; /* 0x1c */
++ volatile unsigned int vlan_tag; /* 0x20 */
++ volatile unsigned int pad[7]; /* 0x24 - 0x3c */
++ volatile unsigned int ucast_table[8]; /* 0x40-0x5c */
++
++} ETHERNET_STRUCT;
++
++/********************************************************************
++ * Interrupt controller
++ ********************************************************************/
++
++typedef struct {
++ volatile unsigned int wdog_control; /* 0x08 */
++ volatile unsigned int wdog_timer; /* 0x0c */
++ volatile unsigned int misc_status; /* 0x10 */
++ volatile unsigned int misc_mask; /* 0x14 */
++ volatile unsigned int global_status; /* 0x18 */
++ volatile unsigned int reserved; /* 0x1c */
++ volatile unsigned int reset_control; /* 0x20 */
++} INTERRUPT;
++
++/********************************************************************
++ * DMA controller
++ ********************************************************************/
++typedef struct {
++ volatile unsigned int bus_mode; /* 0x00 (CSR0) */
++ volatile unsigned int xmt_poll; /* 0x04 (CSR1) */
++ volatile unsigned int rcv_poll; /* 0x08 (CSR2) */
++ volatile unsigned int rcv_base; /* 0x0c (CSR3) */
++ volatile unsigned int xmt_base; /* 0x10 (CSR4) */
++ volatile unsigned int status; /* 0x14 (CSR5) */
++ volatile unsigned int control; /* 0x18 (CSR6) */
++ volatile unsigned int intr_ena; /* 0x1c (CSR7) */
++ volatile unsigned int rcv_missed; /* 0x20 (CSR8) */
++ volatile unsigned int reserved[11]; /* 0x24-0x4c (CSR9-19) */
++ volatile unsigned int cur_tx_buf_addr; /* 0x50 (CSR20) */
++ volatile unsigned int cur_rx_buf_addr; /* 0x50 (CSR21) */
++} DMA;
++
++/*
++ * Struct private for the Sibyte.
++ *
++ * Elements are grouped so variables used by the tx handling goes
++ * together, and will go into the same cache lines etc. in order to
++ * avoid cache line contention between the rx and tx handling on SMP.
++ *
++ * Frequently accessed variables are put at the beginning of the
++ * struct to help the compiler generate better/shorter code.
++ */
++struct ar231x_private {
++ struct net_device *dev;
++ int version;
++ u32 mb[2];
++
++ volatile ETHERNET_STRUCT *phy_regs;
++ volatile ETHERNET_STRUCT *eth_regs;
++ volatile DMA *dma_regs;
++ volatile u32 *int_regs;
++ struct ar231x_eth *cfg;
++
++ spinlock_t lock; /* Serialise access to device */
++
++ /*
++ * RX and TX descriptors, must be adjacent
++ */
++ ar231x_descr_t *rx_ring;
++ ar231x_descr_t *tx_ring;
++
++
++ struct sk_buff **rx_skb;
++ struct sk_buff **tx_skb;
++
++ /*
++ * RX elements
++ */
++ u32 rx_skbprd;
++ u32 cur_rx;
++
++ /*
++ * TX elements
++ */
++ u32 tx_prd;
++ u32 tx_csm;
++
++ /*
++ * Misc elements
++ */
++ char name[48];
++ struct {
++ u32 address;
++ u32 length;
++ char *mapping;
++ } desc;
++
++
++ struct timer_list link_timer;
++ unsigned short phy; /* merlot phy = 1, samsung phy = 0x1f */
++ unsigned short mac;
++ unsigned short link; /* 0 - link down, 1 - link up */
++ u16 phyData;
++
++ struct tasklet_struct rx_tasklet;
++ int unloading;
++
++ struct phy_device *phy_dev;
++ struct mii_bus *mii_bus;
++ int oldduplex;
++};
++
++
++/*
++ * Prototypes
++ */
++static int ar231x_init(struct net_device *dev);
++#ifdef TX_TIMEOUT
++static void ar231x_tx_timeout(struct net_device *dev);
++#endif
++static int ar231x_restart(struct net_device *dev);
++static void ar231x_load_rx_ring(struct net_device *dev, int bufs);
++static irqreturn_t ar231x_interrupt(int irq, void *dev_id);
++static int ar231x_open(struct net_device *dev);
++static int ar231x_start_xmit(struct sk_buff *skb, struct net_device *dev);
++static int ar231x_close(struct net_device *dev);
++static int ar231x_ioctl(struct net_device *dev, struct ifreq *ifr,
++ int cmd);
++static void ar231x_init_cleanup(struct net_device *dev);
++static int ar231x_setup_timer(struct net_device *dev);
++static void ar231x_link_timer_fn(unsigned long data);
++static void ar231x_check_link(struct net_device *dev);
++#endif /* _AR2313_H_ */
diff --git a/target/linux/atheros/patches-2.6.34/120-spiflash.patch b/target/linux/atheros/patches-2.6.34/120-spiflash.patch
new file mode 100644
index 000000000..8e3714649
--- /dev/null
+++ b/target/linux/atheros/patches-2.6.34/120-spiflash.patch
@@ -0,0 +1,659 @@
+--- a/drivers/mtd/devices/Kconfig
++++ b/drivers/mtd/devices/Kconfig
+@@ -112,6 +112,10 @@ config MTD_SST25L
+ Set up your spi devices with the right board-specific platform data,
+ if you want to specify device partitioning.
+
++config MTD_AR2315
++ tristate "Atheros AR2315+ SPI Flash support"
++ depends on ATHEROS_AR2315
++
+ config MTD_SLRAM
+ tristate "Uncached system RAM"
+ help
+--- a/drivers/mtd/devices/Makefile
++++ b/drivers/mtd/devices/Makefile
+@@ -17,3 +17,4 @@ obj-$(CONFIG_MTD_BLOCK2MTD) += block2mtd
+ obj-$(CONFIG_MTD_DATAFLASH) += mtd_dataflash.o
+ obj-$(CONFIG_MTD_M25P80) += m25p80.o
+ obj-$(CONFIG_MTD_SST25L) += sst25l.o
++obj-$(CONFIG_MTD_AR2315) += ar2315.o
+--- /dev/null
++++ b/drivers/mtd/devices/ar2315.c
+@@ -0,0 +1,517 @@
++
++/*
++ * MTD driver for the SPI Flash Memory support on Atheros AR2315
++ *
++ * Copyright (c) 2005-2006 Atheros Communications Inc.
++ * Copyright (C) 2006-2007 FON Technology, SL.
++ * Copyright (C) 2006-2007 Imre Kaloz <kaloz@openwrt.org>
++ * Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org>
++ *
++ * This code is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/types.h>
++#include <linux/version.h>
++#include <linux/errno.h>
++#include <linux/slab.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/partitions.h>
++#include <linux/platform_device.h>
++#include <linux/sched.h>
++#include <linux/root_dev.h>
++#include <linux/delay.h>
++#include <asm/delay.h>
++#include <asm/io.h>
++
++#include <ar2315_spiflash.h>
++#include <ar231x_platform.h>
++#include <ar231x.h>
++
++
++#define SPIFLASH "spiflash: "
++#define busy_wait(_priv, _condition, _wait) do { \
++ while (_condition) { \
++ spin_unlock_bh(&_priv->lock); \
++ if (_wait > 1) \
++ msleep(_wait); \
++ else if ((_wait == 1) && need_resched()) \
++ schedule(); \
++ else \
++ udelay(1); \
++ spin_lock_bh(&_priv->lock); \
++ } \
++} while (0)
++
++enum {
++ FLASH_NONE,
++ FLASH_1MB,
++ FLASH_2MB,
++ FLASH_4MB,
++ FLASH_8MB,
++ FLASH_16MB,
++};
++
++/* Flash configuration table */
++struct flashconfig {
++ u32 byte_cnt;
++ u32 sector_cnt;
++ u32 sector_size;
++};
++
++const struct flashconfig flashconfig_tbl[] = {
++ [FLASH_NONE] = { 0, 0, 0},
++ [FLASH_1MB] = { STM_1MB_BYTE_COUNT, STM_1MB_SECTOR_COUNT, STM_1MB_SECTOR_SIZE},
++ [FLASH_2MB] = { STM_2MB_BYTE_COUNT, STM_2MB_SECTOR_COUNT, STM_2MB_SECTOR_SIZE},
++ [FLASH_4MB] = { STM_4MB_BYTE_COUNT, STM_4MB_SECTOR_COUNT, STM_4MB_SECTOR_SIZE},
++ [FLASH_8MB] = { STM_8MB_BYTE_COUNT, STM_8MB_SECTOR_COUNT, STM_8MB_SECTOR_SIZE},
++ [FLASH_16MB] = { STM_16MB_BYTE_COUNT, STM_16MB_SECTOR_COUNT, STM_16MB_SECTOR_SIZE}
++};
++
++/* Mapping of generic opcodes to STM serial flash opcodes */
++enum {
++ SPI_WRITE_ENABLE,
++ SPI_WRITE_DISABLE,
++ SPI_RD_STATUS,
++ SPI_WR_STATUS,
++ SPI_RD_DATA,
++ SPI_FAST_RD_DATA,
++ SPI_PAGE_PROGRAM,
++ SPI_SECTOR_ERASE,
++ SPI_BULK_ERASE,
++ SPI_DEEP_PWRDOWN,
++ SPI_RD_SIG,
++};
++
++struct opcodes {
++ __u16 code;
++ __s8 tx_cnt;
++ __s8 rx_cnt;
++};
++const struct opcodes stm_opcodes[] = {
++ [SPI_WRITE_ENABLE] = {STM_OP_WR_ENABLE, 1, 0},
++ [SPI_WRITE_DISABLE] = {STM_OP_WR_DISABLE, 1, 0},
++ [SPI_RD_STATUS] = {STM_OP_RD_STATUS, 1, 1},
++ [SPI_WR_STATUS] = {STM_OP_WR_STATUS, 1, 0},
++ [SPI_RD_DATA] = {STM_OP_RD_DATA, 4, 4},
++ [SPI_FAST_RD_DATA] = {STM_OP_FAST_RD_DATA, 5, 0},
++ [SPI_PAGE_PROGRAM] = {STM_OP_PAGE_PGRM, 8, 0},
++ [SPI_SECTOR_ERASE] = {STM_OP_SECTOR_ERASE, 4, 0},
++ [SPI_BULK_ERASE] = {STM_OP_BULK_ERASE, 1, 0},
++ [SPI_DEEP_PWRDOWN] = {STM_OP_DEEP_PWRDOWN, 1, 0},
++ [SPI_RD_SIG] = {STM_OP_RD_SIG, 4, 1},
++};
++
++/* Driver private data structure */
++struct spiflash_priv {
++ struct mtd_info mtd;
++ void *readaddr; /* memory mapped data for read */
++ void *mmraddr; /* memory mapped register space */
++ wait_queue_head_t wq;
++ spinlock_t lock;
++ int state;
++};
++
++#define to_spiflash(_mtd) container_of(_mtd, struct spiflash_priv, mtd)
++
++enum {
++ FL_READY,
++ FL_READING,
++ FL_ERASING,
++ FL_WRITING
++};
++
++/***************************************************************************************************/
++
++static u32
++spiflash_read_reg(struct spiflash_priv *priv, int reg)
++{
++ return ar231x_read_reg((u32) priv->mmraddr + reg);
++}
++
++static void
++spiflash_write_reg(struct spiflash_priv *priv, int reg, u32 data)
++{
++ ar231x_write_reg((u32) priv->mmraddr + reg, data);
++}
++
++static u32
++spiflash_wait_busy(struct spiflash_priv *priv)
++{
++ u32 reg;
++
++ busy_wait(priv, (reg = spiflash_read_reg(priv, SPI_FLASH_CTL)) &
++ SPI_CTL_BUSY, 0);
++ return reg;
++}
++
++static u32
++spiflash_sendcmd (struct spiflash_priv *priv, int opcode, u32 addr)
++{
++ const struct opcodes *op;
++ u32 reg, mask;
++
++ op = &stm_opcodes[opcode];
++ reg = spiflash_wait_busy(priv);
++ spiflash_write_reg(priv, SPI_FLASH_OPCODE,
++ ((u32) op->code) | (addr << 8));
++
++ reg &= ~SPI_CTL_TX_RX_CNT_MASK;
++ reg |= SPI_CTL_START | op->tx_cnt | (op->rx_cnt << 4);
++
++ spiflash_write_reg(priv, SPI_FLASH_CTL, reg);
++ spiflash_wait_busy(priv);
++
++ if (!op->rx_cnt)
++ return 0;
++
++ reg = spiflash_read_reg(priv, SPI_FLASH_DATA);
++
++ switch (op->rx_cnt) {
++ case 1:
++ mask = 0x000000ff;
++ break;
++ case 2:
++ mask = 0x0000ffff;
++ break;
++ case 3:
++ mask = 0x00ffffff;
++ break;
++ default:
++ mask = 0xffffffff;
++ break;
++ }
++ reg &= mask;
++
++ return reg;
++}
++
++
++/*
++ * Probe SPI flash device
++ * Function returns 0 for failure.
++ * and flashconfig_tbl array index for success.
++ */
++static int
++spiflash_probe_chip (struct spiflash_priv *priv)
++{
++ u32 sig;
++ int flash_size;
++
++ /* Read the signature on the flash device */
++ spin_lock_bh(&priv->lock);
++ sig = spiflash_sendcmd(priv, SPI_RD_SIG, 0);
++ spin_unlock_bh(&priv->lock);
++
++ switch (sig) {
++ case STM_8MBIT_SIGNATURE:
++ flash_size = FLASH_1MB;
++ break;
++ case STM_16MBIT_SIGNATURE:
++ flash_size = FLASH_2MB;
++ break;
++ case STM_32MBIT_SIGNATURE:
++ flash_size = FLASH_4MB;
++ break;
++ case STM_64MBIT_SIGNATURE:
++ flash_size = FLASH_8MB;
++ break;
++ case STM_128MBIT_SIGNATURE:
++ flash_size = FLASH_16MB;
++ break;
++ default:
++ printk (KERN_WARNING SPIFLASH "Read of flash device signature failed!\n");
++ return 0;
++ }
++
++ return flash_size;
++}
++
++
++/* wait until the flash chip is ready and grab a lock */
++static int spiflash_wait_ready(struct spiflash_priv *priv, int state)
++{
++ DECLARE_WAITQUEUE(wait, current);
++
++retry:
++ spin_lock_bh(&priv->lock);
++ if (priv->state != FL_READY) {
++ set_current_state(TASK_UNINTERRUPTIBLE);
++ add_wait_queue(&priv->wq, &wait);
++ spin_unlock_bh(&priv->lock);
++ schedule();
++ remove_wait_queue(&priv->wq, &wait);
++
++ if(signal_pending(current))
++ return 0;
++
++ goto retry;
++ }
++ priv->state = state;
++
++ return 1;
++}
++
++static inline void spiflash_done(struct spiflash_priv *priv)
++{
++ priv->state = FL_READY;
++ spin_unlock_bh(&priv->lock);
++ wake_up(&priv->wq);
++}
++
++static void
++spiflash_wait_complete(struct spiflash_priv *priv, unsigned int timeout)
++{
++ busy_wait(priv, spiflash_sendcmd(priv, SPI_RD_STATUS, 0) &
++ SPI_STATUS_WIP, timeout);
++ spiflash_done(priv);
++}
++
++
++
++static int
++spiflash_erase (struct mtd_info *mtd, struct erase_info *instr)
++{
++ struct spiflash_priv *priv = to_spiflash(mtd);
++ const struct opcodes *op;
++ u32 temp, reg;
++
++ if (instr->addr + instr->len > mtd->size)
++ return -EINVAL;
++
++ if (!spiflash_wait_ready(priv, FL_ERASING))
++ return -EINTR;
++
++ spiflash_sendcmd(priv, SPI_WRITE_ENABLE, 0);
++ reg = spiflash_wait_busy(priv);
++
++ op = &stm_opcodes[SPI_SECTOR_ERASE];
++ temp = ((u32)instr->addr << 8) | (u32)(op->code);
++ spiflash_write_reg(priv, SPI_FLASH_OPCODE, temp);
++
++ reg &= ~SPI_CTL_TX_RX_CNT_MASK;
++ reg |= op->tx_cnt | SPI_CTL_START;
++ spiflash_write_reg(priv, SPI_FLASH_CTL, reg);
++
++ spiflash_wait_complete(priv, 20);
++
++ instr->state = MTD_ERASE_DONE;
++ mtd_erase_callback(instr);
++
++ return 0;
++}
++
++static int
++spiflash_read (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf)
++{
++ struct spiflash_priv *priv = to_spiflash(mtd);
++ u8 *read_addr;
++
++ if (!len)
++ return 0;
++
++ if (from + len > mtd->size)
++ return -EINVAL;
++
++ *retlen = len;
++
++ if (!spiflash_wait_ready(priv, FL_READING))
++ return -EINTR;
++
++ read_addr = (u8 *)(priv->readaddr + from);
++ memcpy_fromio(buf, read_addr, len);
++ spiflash_done(priv);
++
++ return 0;
++}
++
++static int
++spiflash_write (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u8 *buf)
++{
++ struct spiflash_priv *priv = to_spiflash(mtd);
++ u32 opcode, bytes_left;
++
++ *retlen = 0;
++
++ if (!len)
++ return 0;
++
++ if (to + len > mtd->size)
++ return -EINVAL;
++
++ bytes_left = len;
++
++ do {
++ u32 read_len, reg, page_offset, spi_data = 0;
++
++ read_len = min(bytes_left, sizeof(u32));
++
++ /* 32-bit writes cannot span across a page boundary
++ * (256 bytes). This types of writes require two page
++ * program operations to handle it correctly. The STM part
++ * will write the overflow data to the beginning of the
++ * current page as opposed to the subsequent page.
++ */
++ page_offset = (to & (STM_PAGE_SIZE - 1)) + read_len;
++
++ if (page_offset > STM_PAGE_SIZE)
++ read_len -= (page_offset - STM_PAGE_SIZE);
++
++ if (!spiflash_wait_ready(priv, FL_WRITING))
++ return -EINTR;
++
++ spiflash_sendcmd(priv, SPI_WRITE_ENABLE, 0);
++ spi_data = 0;
++ switch (read_len) {
++ case 4:
++ spi_data |= buf[3] << 24;
++ /* fall through */
++ case 3:
++ spi_data |= buf[2] << 16;
++ /* fall through */
++ case 2:
++ spi_data |= buf[1] << 8;
++ /* fall through */
++ case 1:
++ spi_data |= buf[0] & 0xff;
++ break;
++ default:
++ break;
++ }
++
++ spiflash_write_reg(priv, SPI_FLASH_DATA, spi_data);
++ opcode = stm_opcodes[SPI_PAGE_PROGRAM].code |
++ (to & 0x00ffffff) << 8;
++ spiflash_write_reg(priv, SPI_FLASH_OPCODE, opcode);
++
++ reg = spiflash_read_reg(priv, SPI_FLASH_CTL);
++ reg &= ~SPI_CTL_TX_RX_CNT_MASK;
++ reg |= (read_len + 4) | SPI_CTL_START;
++ spiflash_write_reg(priv, SPI_FLASH_CTL, reg);
++
++ spiflash_wait_complete(priv, 1);
++
++ bytes_left -= read_len;
++ to += read_len;
++ buf += read_len;
++
++ *retlen += read_len;
++ } while (bytes_left != 0);
++
++ return 0;
++}
++
++
++#ifdef CONFIG_MTD_PARTITIONS
++static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", "MyLoader", NULL };
++#endif
++
++
++static int
++spiflash_probe(struct platform_device *pdev)
++{
++ struct spiflash_priv *priv;
++ struct mtd_partition *parts;
++ struct mtd_info *mtd;
++ int index, num_parts;
++ int result = 0;
++
++ priv = kzalloc(sizeof(struct spiflash_priv), GFP_KERNEL);
++ spin_lock_init(&priv->lock);
++ init_waitqueue_head(&priv->wq);
++ priv->state = FL_READY;
++ mtd = &priv->mtd;
++
++ priv->mmraddr = ioremap_nocache(SPI_FLASH_MMR, SPI_FLASH_MMR_SIZE);
++ if (!priv->mmraddr) {
++ printk(KERN_WARNING SPIFLASH "Failed to map flash device\n");
++ goto error;
++ }
++
++ index = spiflash_probe_chip(priv);
++ if (!index) {
++ printk (KERN_WARNING SPIFLASH "Found no serial flash device\n");
++ goto error;
++ }
++
++ priv->readaddr = ioremap_nocache(SPI_FLASH_READ, flashconfig_tbl[index].byte_cnt);
++ if (!priv->readaddr) {
++ printk (KERN_WARNING SPIFLASH "Failed to map flash device\n");
++ goto error;
++ }
++
++ platform_set_drvdata(pdev, priv);
++ mtd->name = "spiflash";
++ mtd->type = MTD_NORFLASH;
++ mtd->flags = (MTD_CAP_NORFLASH|MTD_WRITEABLE);
++ mtd->size = flashconfig_tbl[index].byte_cnt;
++ mtd->erasesize = flashconfig_tbl[index].sector_size;
++ mtd->writesize = 1;
++ mtd->numeraseregions = 0;
++ mtd->eraseregions = NULL;
++ mtd->erase = spiflash_erase;
++ mtd->read = spiflash_read;
++ mtd->write = spiflash_write;
++ mtd->owner = THIS_MODULE;
++
++#ifdef CONFIG_MTD_PARTITIONS
++ /* parse redboot partitions */
++ num_parts = parse_mtd_partitions(mtd, part_probe_types, &parts, 0);
++ if (!num_parts)
++ goto error;
++
++ result = add_mtd_partitions(mtd, parts, num_parts);
++#endif
++
++ return result;
++
++error:
++ if (priv->mmraddr)
++ iounmap(priv->mmraddr);
++ kfree(priv);
++ return -ENXIO;
++}
++
++static int
++spiflash_remove (struct platform_device *pdev)
++{
++ struct spiflash_priv *priv = platform_get_drvdata(pdev);
++ struct mtd_info *mtd = &priv->mtd;
++
++ del_mtd_partitions(mtd);
++ iounmap(priv->mmraddr);
++ iounmap(priv->readaddr);
++ kfree(priv);
++
++ return 0;
++}
++
++struct platform_driver spiflash_driver = {
++ .driver.name = "spiflash",
++ .probe = spiflash_probe,
++ .remove = spiflash_remove,
++};
++
++int __init
++spiflash_init (void)
++{
++ return platform_driver_register(&spiflash_driver);
++}
++
++void __exit
++spiflash_exit (void)
++{
++ return platform_driver_unregister(&spiflash_driver);
++}
++
++module_init (spiflash_init);
++module_exit (spiflash_exit);
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("OpenWrt.org, Atheros Communications Inc");
++MODULE_DESCRIPTION("MTD driver for SPI Flash on Atheros SOC");
++
+--- /dev/null
++++ b/arch/mips/include/asm/mach-ar231x/ar2315_spiflash.h
+@@ -0,0 +1,116 @@
++/*
++ * SPI Flash Memory support header file.
++ *
++ * Copyright (c) 2005, Atheros Communications Inc.
++ * Copyright (C) 2006 FON Technology, SL.
++ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
++ * Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org>
++ *
++ * This code is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++#ifndef __AR2315_SPIFLASH_H
++#define __AR2315_SPIFLASH_H
++
++#define STM_PAGE_SIZE 256
++
++#define SFI_WRITE_BUFFER_SIZE 4
++#define SFI_FLASH_ADDR_MASK 0x00ffffff
++
++#define STM_8MBIT_SIGNATURE 0x13
++#define STM_M25P80_BYTE_COUNT 1048576
++#define STM_M25P80_SECTOR_COUNT 16
++#define STM_M25P80_SECTOR_SIZE 0x10000
++
++#define STM_16MBIT_SIGNATURE 0x14
++#define STM_M25P16_BYTE_COUNT 2097152
++#define STM_M25P16_SECTOR_COUNT 32
++#define STM_M25P16_SECTOR_SIZE 0x10000
++
++#define STM_32MBIT_SIGNATURE 0x15
++#define STM_M25P32_BYTE_COUNT 4194304
++#define STM_M25P32_SECTOR_COUNT 64
++#define STM_M25P32_SECTOR_SIZE 0x10000
++
++#define STM_64MBIT_SIGNATURE 0x16
++#define STM_M25P64_BYTE_COUNT 8388608
++#define STM_M25P64_SECTOR_COUNT 128
++#define STM_M25P64_SECTOR_SIZE 0x10000
++
++#define STM_128MBIT_SIGNATURE 0x17
++#define STM_M25P128_BYTE_COUNT 16777216
++#define STM_M25P128_SECTOR_COUNT 256
++#define STM_M25P128_SECTOR_SIZE 0x10000
++
++#define STM_1MB_BYTE_COUNT STM_M25P80_BYTE_COUNT
++#define STM_1MB_SECTOR_COUNT STM_M25P80_SECTOR_COUNT
++#define STM_1MB_SECTOR_SIZE STM_M25P80_SECTOR_SIZE
++#define STM_2MB_BYTE_COUNT STM_M25P16_BYTE_COUNT
++#define STM_2MB_SECTOR_COUNT STM_M25P16_SECTOR_COUNT
++#define STM_2MB_SECTOR_SIZE STM_M25P16_SECTOR_SIZE
++#define STM_4MB_BYTE_COUNT STM_M25P32_BYTE_COUNT
++#define STM_4MB_SECTOR_COUNT STM_M25P32_SECTOR_COUNT
++#define STM_4MB_SECTOR_SIZE STM_M25P32_SECTOR_SIZE
++#define STM_8MB_BYTE_COUNT STM_M25P64_BYTE_COUNT
++#define STM_8MB_SECTOR_COUNT STM_M25P64_SECTOR_COUNT
++#define STM_8MB_SECTOR_SIZE STM_M25P64_SECTOR_SIZE
++#define STM_16MB_BYTE_COUNT STM_M25P128_BYTE_COUNT
++#define STM_16MB_SECTOR_COUNT STM_M25P128_SECTOR_COUNT
++#define STM_16MB_SECTOR_SIZE STM_M25P128_SECTOR_SIZE
++
++/*
++ * ST Microelectronics Opcodes for Serial Flash
++ */
++
++#define STM_OP_WR_ENABLE 0x06 /* Write Enable */
++#define STM_OP_WR_DISABLE 0x04 /* Write Disable */
++#define STM_OP_RD_STATUS 0x05 /* Read Status */
++#define STM_OP_WR_STATUS 0x01 /* Write Status */
++#define STM_OP_RD_DATA 0x03 /* Read Data */
++#define STM_OP_FAST_RD_DATA 0x0b /* Fast Read Data */
++#define STM_OP_PAGE_PGRM 0x02 /* Page Program */
++#define STM_OP_SECTOR_ERASE 0xd8 /* Sector Erase */
++#define STM_OP_BULK_ERASE 0xc7 /* Bulk Erase */
++#define STM_OP_DEEP_PWRDOWN 0xb9 /* Deep Power-Down Mode */
++#define STM_OP_RD_SIG 0xab /* Read Electronic Signature */
++
++#define STM_STATUS_WIP 0x01 /* Write-In-Progress */
++#define STM_STATUS_WEL 0x02 /* Write Enable Latch */
++#define STM_STATUS_BP0 0x04 /* Block Protect 0 */
++#define STM_STATUS_BP1 0x08 /* Block Protect 1 */
++#define STM_STATUS_BP2 0x10 /* Block Protect 2 */
++#define STM_STATUS_SRWD 0x80 /* Status Register Write Disable */
++
++/*
++ * SPI Flash Interface Registers
++ */
++#define AR531XPLUS_SPI_READ 0x08000000
++#define AR531XPLUS_SPI_MMR 0x11300000
++#define AR531XPLUS_SPI_MMR_SIZE 12
++
++#define AR531XPLUS_SPI_CTL 0x00
++#define AR531XPLUS_SPI_OPCODE 0x04
++#define AR531XPLUS_SPI_DATA 0x08
++
++#define SPI_FLASH_READ AR531XPLUS_SPI_READ
++#define SPI_FLASH_MMR AR531XPLUS_SPI_MMR
++#define SPI_FLASH_MMR_SIZE AR531XPLUS_SPI_MMR_SIZE
++#define SPI_FLASH_CTL AR531XPLUS_SPI_CTL
++#define SPI_FLASH_OPCODE AR531XPLUS_SPI_OPCODE
++#define SPI_FLASH_DATA AR531XPLUS_SPI_DATA
++
++#define SPI_CTL_START 0x00000100
++#define SPI_CTL_BUSY 0x00010000
++#define SPI_CTL_TXCNT_MASK 0x0000000f
++#define SPI_CTL_RXCNT_MASK 0x000000f0
++#define SPI_CTL_TX_RX_CNT_MASK 0x000000ff
++#define SPI_CTL_SIZE_MASK 0x00060000
++
++#define SPI_CTL_CLK_SEL_MASK 0x03000000
++#define SPI_OPCODE_MASK 0x000000ff
++
++#define SPI_STATUS_WIP STM_STATUS_WIP
++
++#endif
diff --git a/target/linux/atheros/patches-2.6.34/130-watchdog.patch b/target/linux/atheros/patches-2.6.34/130-watchdog.patch
new file mode 100644
index 000000000..80d244e44
--- /dev/null
+++ b/target/linux/atheros/patches-2.6.34/130-watchdog.patch
@@ -0,0 +1,228 @@
+--- /dev/null
++++ b/drivers/watchdog/ar2315-wtd.c
+@@ -0,0 +1,200 @@
++/*
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
++ *
++ * Copyright (C) 2008 John Crispin <blogic@openwrt.org>
++ * Based on EP93xx and ifxmips wdt driver
++ */
++
++#include <linux/interrupt.h>
++#include <linux/module.h>
++#include <linux/moduleparam.h>
++#include <linux/types.h>
++#include <linux/miscdevice.h>
++#include <linux/watchdog.h>
++#include <linux/fs.h>
++#include <linux/ioport.h>
++#include <linux/notifier.h>
++#include <linux/reboot.h>
++#include <linux/init.h>
++#include <linux/platform_device.h>
++
++#include <asm/io.h>
++#include <asm/uaccess.h>
++#include <asm/system.h>
++#include <asm/addrspace.h>
++#include <ar231x_platform.h>
++#include <ar2315_regs.h>
++#include <ar231x.h>
++
++#define CLOCK_RATE 40000000
++#define HEARTBEAT(x) (x < 1 || x > 90)?(20):(x)
++
++static int wdt_timeout = 20;
++static int started = 0;
++static int in_use = 0;
++
++static void
++ar2315_wdt_enable(void)
++{
++ ar231x_write_reg(AR2315_WD, wdt_timeout * CLOCK_RATE);
++ ar231x_write_reg(AR2315_ISR, 0x80);
++}
++
++static ssize_t
++ar2315_wdt_write(struct file *file, const char __user *data, size_t len, loff_t *ppos)
++{
++ if(len)
++ ar2315_wdt_enable();
++ return len;
++}
++
++static int
++ar2315_wdt_open(struct inode *inode, struct file *file)
++{
++ if(in_use)
++ return -EBUSY;
++ ar2315_wdt_enable();
++ in_use = started = 1;
++ return nonseekable_open(inode, file);
++}
++
++static int
++ar2315_wdt_release(struct inode *inode, struct file *file)
++{
++ in_use = 0;
++ return 0;
++}
++
++static irqreturn_t
++ar2315_wdt_interrupt(int irq, void *dev_id)
++{
++ if(started)
++ {
++ printk(KERN_CRIT "watchdog expired, rebooting system\n");
++ emergency_restart();
++ } else {
++ ar231x_write_reg(AR2315_WDC, 0);
++ ar231x_write_reg(AR2315_WD, 0);
++ ar231x_write_reg(AR2315_ISR, 0x80);
++ }
++ return IRQ_HANDLED;
++}
++
++static struct watchdog_info ident = {
++ .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
++ .identity = "ar2315 Watchdog",
++};
++
++static int
++ar2315_wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
++{
++ int new_wdt_timeout;
++ int ret = -ENOIOCTLCMD;
++
++ switch(cmd)
++ {
++ case WDIOC_GETSUPPORT:
++ ret = copy_to_user((struct watchdog_info __user *)arg, &ident, sizeof(ident)) ? -EFAULT : 0;
++ break;
++
++ case WDIOC_KEEPALIVE:
++ ar2315_wdt_enable();
++ ret = 0;
++ break;
++
++ case WDIOC_SETTIMEOUT:
++ if((ret = get_user(new_wdt_timeout, (int __user *)arg)))
++ break;
++ wdt_timeout = HEARTBEAT(new_wdt_timeout);
++ ar2315_wdt_enable();
++ break;
++
++ case WDIOC_GETTIMEOUT:
++ ret = put_user(wdt_timeout, (int __user *)arg);
++ break;
++ }
++ return ret;
++}
++
++static struct file_operations ar2315_wdt_fops = {
++ .owner = THIS_MODULE,
++ .llseek = no_llseek,
++ .write = ar2315_wdt_write,
++ .ioctl = ar2315_wdt_ioctl,
++ .open = ar2315_wdt_open,
++ .release = ar2315_wdt_release,
++};
++
++static struct miscdevice ar2315_wdt_miscdev = {
++ .minor = WATCHDOG_MINOR,
++ .name = "watchdog",
++ .fops = &ar2315_wdt_fops,
++};
++
++static int
++ar2315_wdt_probe(struct platform_device *dev)
++{
++ int ret = 0;
++
++ ar2315_wdt_enable();
++ ret = request_irq(AR531X_MISC_IRQ_WATCHDOG, ar2315_wdt_interrupt, IRQF_DISABLED, "ar2315_wdt", NULL);
++ if(ret)
++ {
++ printk(KERN_ERR "ar2315wdt: failed to register inetrrupt\n");
++ goto out;
++ }
++
++ ret = misc_register(&ar2315_wdt_miscdev);
++ if(ret)
++ printk(KERN_ERR "ar2315wdt: failed to register miscdev\n");
++
++out:
++ return ret;
++}
++
++static int
++ar2315_wdt_remove(struct platform_device *dev)
++{
++ misc_deregister(&ar2315_wdt_miscdev);
++ free_irq(AR531X_MISC_IRQ_WATCHDOG, NULL);
++ return 0;
++}
++
++static struct platform_driver ar2315_wdt_driver = {
++ .probe = ar2315_wdt_probe,
++ .remove = ar2315_wdt_remove,
++ .driver = {
++ .name = "ar2315_wdt",
++ .owner = THIS_MODULE,
++ },
++};
++
++static int __init
++init_ar2315_wdt(void)
++{
++ int ret = platform_driver_register(&ar2315_wdt_driver);
++ if(ret)
++ printk(KERN_INFO "ar2315_wdt: error registering platfom driver!");
++ return ret;
++}
++
++static void __exit
++exit_ar2315_wdt(void)
++{
++ platform_driver_unregister(&ar2315_wdt_driver);
++}
++
++module_init(init_ar2315_wdt);
++module_exit(exit_ar2315_wdt);
+--- a/drivers/watchdog/Kconfig
++++ b/drivers/watchdog/Kconfig
+@@ -857,6 +857,12 @@ config TXX9_WDT
+ help
+ Hardware driver for the built-in watchdog timer on TXx9 MIPS SoCs.
+
++config ATHEROS_WDT
++ tristate "Atheros wisoc Watchdog Timer"
++ depends on ATHEROS_AR231X
++ help
++ Hardware driver for the Atheros wisoc Watchdog Timer.
++
+ # PARISC Architecture
+
+ # POWERPC Architecture
+--- a/drivers/watchdog/Makefile
++++ b/drivers/watchdog/Makefile
+@@ -113,6 +113,7 @@ obj-$(CONFIG_PNX833X_WDT) += pnx833x_wdt
+ obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o
+ obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
+ obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
++obj-$(CONFIG_ATHEROS_WDT) += ar2315-wtd.o
+
+ # PARISC Architecture
+
diff --git a/target/linux/atheros/patches-2.6.34/140-redboot_partition_scan.patch b/target/linux/atheros/patches-2.6.34/140-redboot_partition_scan.patch
new file mode 100644
index 000000000..289d4eb99
--- /dev/null
+++ b/target/linux/atheros/patches-2.6.34/140-redboot_partition_scan.patch
@@ -0,0 +1,54 @@
+--- a/drivers/mtd/redboot.c
++++ b/drivers/mtd/redboot.c
+@@ -60,31 +60,32 @@ static int parse_redboot_partitions(stru
+ static char nullstring[] = "unallocated";
+ #endif
+
++ buf = vmalloc(master->erasesize);
++ if (!buf)
++ return -ENOMEM;
++
++ restart:
+ if ( directory < 0 ) {
+ offset = master->size + directory * master->erasesize;
+- while (master->block_isbad &&
++ while (master->block_isbad &&
+ master->block_isbad(master, offset)) {
+ if (!offset) {
+ nogood:
+ printk(KERN_NOTICE "Failed to find a non-bad block to check for RedBoot partition table\n");
++ vfree(buf);
+ return -EIO;
+ }
+ offset -= master->erasesize;
+ }
+ } else {
+ offset = directory * master->erasesize;
+- while (master->block_isbad &&
++ while (master->block_isbad &&
+ master->block_isbad(master, offset)) {
+ offset += master->erasesize;
+ if (offset == master->size)
+ goto nogood;
+ }
+ }
+- buf = vmalloc(master->erasesize);
+-
+- if (!buf)
+- return -ENOMEM;
+-
+ printk(KERN_NOTICE "Searching for RedBoot partition table in %s at offset 0x%lx\n",
+ master->name, offset);
+
+@@ -156,6 +157,11 @@ static int parse_redboot_partitions(stru
+ }
+ if (i == numslots) {
+ /* Didn't find it */
++ if (offset + master->erasesize < master->size) {
++ /* not at the end of the flash yet, maybe next block :) */
++ directory++;
++ goto restart;
++ }
+ printk(KERN_NOTICE "No RedBoot partition table detected in %s\n",
+ master->name);
+ ret = 0;
diff --git a/target/linux/atheros/patches-2.6.34/141-redboot_various_erase_size_fix.patch b/target/linux/atheros/patches-2.6.34/141-redboot_various_erase_size_fix.patch
new file mode 100644
index 000000000..b9cb0b4bc
--- /dev/null
+++ b/target/linux/atheros/patches-2.6.34/141-redboot_various_erase_size_fix.patch
@@ -0,0 +1,72 @@
+--- a/drivers/mtd/redboot.c
++++ b/drivers/mtd/redboot.c
+@@ -39,6 +39,22 @@ static inline int redboot_checksum(struc
+ return 1;
+ }
+
++static uint32_t mtd_get_offset_erasesize(struct mtd_info *mtd, uint64_t offset)
++{
++ struct mtd_erase_region_info *regions = mtd->eraseregions;
++ int i;
++
++ for (i = 0; i < mtd->numeraseregions; i++) {
++ if (regions[i].offset +
++ regions[i].numblocks * regions[i].erasesize <= offset)
++ continue;
++
++ return regions[i].erasesize;
++ }
++
++ return mtd->erasesize;
++}
++
+ static int parse_redboot_partitions(struct mtd_info *master,
+ struct mtd_partition **pparts,
+ unsigned long fis_origin)
+@@ -55,6 +71,7 @@ static int parse_redboot_partitions(stru
+ int namelen = 0;
+ int nulllen = 0;
+ int numslots;
++ int first_slot;
+ unsigned long offset;
+ #ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED
+ static char nullstring[] = "unallocated";
+@@ -168,7 +185,10 @@ static int parse_redboot_partitions(stru
+ goto out;
+ }
+
+- for (i = 0; i < numslots; i++) {
++ first_slot = (buf[i].flash_base & (master->erasesize - 1)) /
++ sizeof(struct fis_image_desc);
++
++ for (i = first_slot; i < first_slot + numslots; i++) {
+ struct fis_list *new_fl, **prev;
+
+ if (buf[i].name[0] == 0xff) {
+@@ -244,12 +264,13 @@ static int parse_redboot_partitions(stru
+ }
+ #endif
+ for ( ; i<nrparts; i++) {
+- if(max_offset < buf[i].flash_base + buf[i].size)
+- max_offset = buf[i].flash_base + buf[i].size;
+ parts[i].size = fl->img->size;
+ parts[i].offset = fl->img->flash_base;
+ parts[i].name = names;
+
++ if (max_offset < parts[i].offset + parts[i].size)
++ max_offset = parts[i].offset + parts[i].size;
++
+ strcpy(names, fl->img->name);
+ #ifdef CONFIG_MTD_REDBOOT_PARTS_READONLY
+ if (!memcmp(names, "RedBoot", 8) ||
+@@ -279,7 +300,9 @@ static int parse_redboot_partitions(stru
+ fl = fl->next;
+ kfree(tmp_fl);
+ }
+- if(master->size - max_offset >= master->erasesize)
++
++ if (master->size - max_offset >=
++ mtd_get_offset_erasesize(master, max_offset))
+ {
+ parts[nrparts].size = master->size - max_offset;
+ parts[nrparts].offset = max_offset;
diff --git a/target/linux/atheros/patches-2.6.34/200-ar2313_enable_mvswitch.patch b/target/linux/atheros/patches-2.6.34/200-ar2313_enable_mvswitch.patch
new file mode 100644
index 000000000..60025e43e
--- /dev/null
+++ b/target/linux/atheros/patches-2.6.34/200-ar2313_enable_mvswitch.patch
@@ -0,0 +1,70 @@
+--- a/drivers/net/ar231x.c
++++ b/drivers/net/ar231x.c
+@@ -735,6 +735,7 @@ static void ar231x_load_rx_ring(struct n
+ for (i = 0; i < nr_bufs; i++) {
+ struct sk_buff *skb;
+ ar231x_descr_t *rd;
++ int offset = RX_OFFSET;
+
+ if (sp->rx_skb[idx])
+ break;
+@@ -750,7 +751,9 @@ static void ar231x_load_rx_ring(struct n
+ * Make sure IP header starts on a fresh cache line.
+ */
+ skb->dev = dev;
+- skb_reserve(skb, RX_OFFSET);
++ if (sp->phy_dev)
++ offset += sp->phy_dev->pkt_align;
++ skb_reserve(skb, offset);
+ sp->rx_skb[idx] = skb;
+
+ rd = (ar231x_descr_t *) & sp->rx_ring[idx];
+@@ -824,20 +827,23 @@ static int ar231x_rx_int(struct net_devi
+ /* alloc new buffer. */
+ skb_new = netdev_alloc_skb(dev, AR2313_BUFSIZE + RX_OFFSET);
+ if (skb_new != NULL) {
++ int offset;
+
+ skb = sp->rx_skb[idx];
+ /* set skb */
+ skb_put(skb,
+ ((status >> DMA_RX_LEN_SHIFT) & 0x3fff) - CRC_LEN);
+-
+ dev->stats.rx_bytes += skb->len;
+- skb->protocol = eth_type_trans(skb, dev);
+- /* pass the packet to upper layers */
+- netif_rx(skb);
+
++ /* pass the packet to upper layers */
++ sp->rx(skb);
+ skb_new->dev = dev;
++
+ /* 16 bit align */
+- skb_reserve(skb_new, RX_OFFSET);
++ offset = RX_OFFSET;
++ if (sp->phy_dev)
++ offset += sp->phy_dev->pkt_align;
++ skb_reserve(skb_new, offset);
+ /* reset descriptor's curr_addr */
+ rxdesc->addr = virt_to_phys(skb_new->data);
+
+@@ -1239,6 +1245,8 @@ static int ar231x_mdiobus_probe (struct
+ return PTR_ERR(phydev);
+ }
+
++ sp->rx = phydev->netif_rx;
++
+ /* mask with MAC supported features */
+ phydev->supported &= (SUPPORTED_10baseT_Half
+ | SUPPORTED_10baseT_Full
+--- a/drivers/net/ar231x.h
++++ b/drivers/net/ar231x.h
+@@ -221,6 +221,8 @@ typedef struct {
+ */
+ struct ar231x_private {
+ struct net_device *dev;
++ int (*rx)(struct sk_buff *skb);
++
+ int version;
+ u32 mb[2];
+
diff --git a/target/linux/atheros/patches-2.6.34/210-reset_button.patch b/target/linux/atheros/patches-2.6.34/210-reset_button.patch
new file mode 100644
index 000000000..3c9181814
--- /dev/null
+++ b/target/linux/atheros/patches-2.6.34/210-reset_button.patch
@@ -0,0 +1,174 @@
+--- a/arch/mips/ar231x/Makefile
++++ b/arch/mips/ar231x/Makefile
+@@ -8,7 +8,7 @@
+ # Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org>
+ #
+
+-obj-y += board.o prom.o devices.o
++obj-y += board.o prom.o devices.o reset.o
+
+ obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
+
+--- /dev/null
++++ b/arch/mips/ar231x/reset.c
+@@ -0,0 +1,160 @@
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/timer.h>
++#include <linux/interrupt.h>
++#include <linux/kobject.h>
++#include <linux/workqueue.h>
++#include <linux/skbuff.h>
++#include <linux/netlink.h>
++#include <net/sock.h>
++#include <asm/uaccess.h>
++#include <ar231x_platform.h>
++#include <ar231x.h>
++#include <gpio.h>
++#include "devices.h"
++
++#define AR531X_RESET_GPIO_IRQ (AR531X_GPIO_IRQ(ar231x_board.config->resetConfigGpio))
++
++struct event_t {
++ struct work_struct wq;
++ int set;
++ unsigned long jiffies;
++};
++
++static struct timer_list rst_button_timer;
++static unsigned long seen;
++
++extern struct sock *uevent_sock;
++extern u64 uevent_next_seqnum(void);
++
++static int no_release_workaround = 1;
++module_param(no_release_workaround, int, 0);
++
++static inline void
++add_msg(struct sk_buff *skb, char *msg)
++{
++ char *scratch;
++ scratch = skb_put(skb, strlen(msg) + 1);
++ sprintf(scratch, msg);
++}
++
++static void
++hotplug_button(struct work_struct *wq)
++{
++ struct sk_buff *skb;
++ struct event_t *event;
++ size_t len;
++ char *scratch, *s;
++ char buf[128];
++
++ event = container_of(wq, struct event_t, wq);
++ if (!uevent_sock)
++ goto done;
++
++ /* allocate message with the maximum possible size */
++ s = event->set ? "pressed" : "released";
++ len = strlen(s) + 2;
++ skb = alloc_skb(NLMSG_GOODSIZE, GFP_KERNEL);
++ if (!skb)
++ goto done;
++
++ /* add header */
++ scratch = skb_put(skb, len);
++ sprintf(scratch, "%s@",s);
++
++ /* copy keys to our continuous event payload buffer */
++ add_msg(skb, "HOME=/");
++ add_msg(skb, "PATH=/sbin:/bin:/usr/sbin:/usr/bin");
++ add_msg(skb, "SUBSYSTEM=button");
++ add_msg(skb, "BUTTON=reset");
++ add_msg(skb, (event->set ? "ACTION=pressed" : "ACTION=released"));
++ sprintf(buf, "SEEN=%ld", (event->jiffies - seen)/HZ);
++ add_msg(skb, buf);
++ snprintf(buf, 128, "SEQNUM=%llu", uevent_next_seqnum());
++ add_msg(skb, buf);
++
++ NETLINK_CB(skb).dst_group = 1;
++ netlink_broadcast(uevent_sock, skb, 0, 1, GFP_KERNEL);
++
++done:
++ kfree(event);
++}
++
++static void
++reset_button_poll(unsigned long unused)
++{
++ struct event_t *event;
++ int gpio = ~0;
++
++ if(!no_release_workaround)
++ return;
++
++ gpio = ar231x_gpiodev->get();
++ gpio &= (1 << (AR531X_RESET_GPIO_IRQ - AR531X_GPIO_IRQ_BASE));
++ if(gpio) {
++ rst_button_timer.expires = jiffies + (HZ / 4);
++ add_timer(&rst_button_timer);
++ return;
++ }
++
++ event = (struct event_t *) kzalloc(sizeof(struct event_t), GFP_ATOMIC);
++ if (!event)
++ return;
++
++ event->set = 0;
++ event->jiffies = jiffies;
++ INIT_WORK(&event->wq, hotplug_button);
++ schedule_work(&event->wq);
++}
++
++static irqreturn_t
++button_handler(int irq, void *dev_id)
++{
++ static int pressed = 0;
++ struct event_t *event;
++ u32 gpio = ~0;
++
++ event = (struct event_t *) kzalloc(sizeof(struct event_t), GFP_ATOMIC);
++ if (!event)
++ return IRQ_NONE;
++
++ pressed = !pressed;
++
++ gpio = ar231x_gpiodev->get() & (1 << (irq - AR531X_GPIO_IRQ_BASE));
++
++ event->set = gpio;
++ if(!event->set)
++ no_release_workaround = 0;
++
++ event->jiffies = jiffies;
++
++ INIT_WORK(&event->wq, hotplug_button);
++ schedule_work(&event->wq);
++
++ seen = jiffies;
++ if(event->set && no_release_workaround)
++ mod_timer(&rst_button_timer, jiffies + (HZ / 4));
++
++ return IRQ_HANDLED;
++}
++
++
++static int __init
++ar231x_init_reset(void)
++{
++ seen = jiffies;
++
++ if (ar231x_board.config->resetConfigGpio == 0xffff)
++ return -ENODEV;
++
++ init_timer(&rst_button_timer);
++ rst_button_timer.function = reset_button_poll;
++ rst_button_timer.expires = jiffies + HZ / 50;
++ add_timer(&rst_button_timer);
++
++ request_irq(AR531X_RESET_GPIO_IRQ, &button_handler, IRQF_SAMPLE_RANDOM, "ar231x_reset", NULL);
++
++ return 0;
++}
++
++module_init(ar231x_init_reset);
diff --git a/target/linux/atheros/patches-2.6.34/220-enet_micrel_workaround.patch b/target/linux/atheros/patches-2.6.34/220-enet_micrel_workaround.patch
new file mode 100644
index 000000000..989bd7606
--- /dev/null
+++ b/target/linux/atheros/patches-2.6.34/220-enet_micrel_workaround.patch
@@ -0,0 +1,69 @@
+--- a/drivers/net/ar231x.c
++++ b/drivers/net/ar231x.c
+@@ -148,6 +148,7 @@ static int ar231x_mdiobus_write(struct m
+ static int ar231x_mdiobus_reset(struct mii_bus *bus);
+ static int ar231x_mdiobus_probe (struct net_device *dev);
+ static void ar231x_adjust_link(struct net_device *dev);
++static bool no_phy = false;
+
+ #ifndef ERR
+ #define ERR(fmt, args...) printk("%s: " fmt, __func__, ##args)
+@@ -278,6 +279,21 @@ int __init ar231x_probe(struct platform_
+
+ mdiobus_register(sp->mii_bus);
+
++ /* Workaround for Micrel switch, which is only available on
++ * one PHY and cannot be configured through MDIO */
++ if (!no_phy) {
++ u32 phy_id = 0;
++ get_phy_id(sp->mii_bus, 1, &phy_id);
++ if (phy_id == 0x00221450)
++ no_phy = true;
++ }
++ if (no_phy) {
++ sp->link = 1;
++ netif_carrier_on(dev);
++ return 0;
++ }
++ no_phy = true;
++
+ if (ar231x_mdiobus_probe(dev) != 0) {
+ printk(KERN_ERR "%s: mdiobus_probe failed\n", dev->name);
+ rx_tasklet_cleanup(dev);
+@@ -334,8 +350,10 @@ static int __devexit ar231x_remove(struc
+ rx_tasklet_cleanup(dev);
+ ar231x_init_cleanup(dev);
+ unregister_netdev(dev);
+- mdiobus_unregister(sp->mii_bus);
+- mdiobus_free(sp->mii_bus);
++ if (sp->mii_bus) {
++ mdiobus_unregister(sp->mii_bus);
++ mdiobus_free(sp->mii_bus);
++ }
+ kfree(dev);
+ return 0;
+ }
+@@ -836,7 +854,12 @@ static int ar231x_rx_int(struct net_devi
+ dev->stats.rx_bytes += skb->len;
+
+ /* pass the packet to upper layers */
+- sp->rx(skb);
++ if (sp->rx) {
++ sp->rx(skb);
++ } else {
++ skb->protocol = eth_type_trans(skb, skb->dev);
++ netif_rx(skb);
++ }
+ skb_new->dev = dev;
+
+ /* 16 bit align */
+@@ -1123,6 +1146,9 @@ static int ar231x_ioctl(struct net_devic
+ struct ar231x_private *sp = netdev_priv(dev);
+ int ret;
+
++ if (!sp->phy_dev)
++ return -ENODEV;
++
+ switch (cmd) {
+
+ case SIOCETHTOOL:
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-23 19:34:40 +0000