Refreshed the dsmg600 and nas100d power patches from nslu2-linux

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10168 3c298f89-4303-0410-b956-a3cf2f4a3e73

2 files changed, 167 insertions, 37 deletions

diff --git a/target/linux/ixp4xx/patches-2.6.23/016-dsmg600_auto_power_on.patch b/target/linux/ixp4xx/patches-2.6.23/016-dsmg600_auto_power_on.patch
index 25709da4f..2a1f2415f 100644
--- a/target/linux/ixp4xx/patches-2.6.23/016-dsmg600_auto_power_on.patch
+++ b/target/linux/ixp4xx/patches-2.6.23/016-dsmg600_auto_power_on.patch
@@ -1,13 +1,40 @@
+Upgrade the power and reset button handling for the DSMG600:
+ * Remove the superfluous declaration of ctrl_alt_del().
+ * Convert GPIO and IRQ handling to use the <asm/gpio.h> api.
+ * Perform the reset on the release of the power button, so that
+   NAS devices which have been set to auto-power-on (by bridging
+   the power button) do not continuously power cycle.
+ * Remove all superflous constants from dsmg600.h
+
+Signed-off-by: Rod Whitby <rod@whitby.id.au>
+
 ---
- arch/arm/mach-ixp4xx/dsmg600-power.c |   13 +++++++++----
- 1 file changed, 9 insertions(+), 4 deletions(-)
+ arch/arm/mach-ixp4xx/dsmg600-power.c  |   24 ++++++++++++++----------
+ include/asm-arm/arch-ixp4xx/dsmg600.h |    7 +------
+ 2 files changed, 15 insertions(+), 16 deletions(-)
 
-Index: linux-2.6.22-rc5-armeb/arch/arm/mach-ixp4xx/dsmg600-power.c
+Index: linux-2.6.23.12-armeb/arch/arm/mach-ixp4xx/dsmg600-power.c
 ===================================================================
---- linux-2.6.22-rc5-armeb.orig/arch/arm/mach-ixp4xx/dsmg600-power.c
-+++ linux-2.6.22-rc5-armeb/arch/arm/mach-ixp4xx/dsmg600-power.c
-@@ -50,6 +50,13 @@
- 	if (*IXP4XX_GPIO_GPINR & DSMG600_PB_BM) {
+--- linux-2.6.23.12-armeb.orig/arch/arm/mach-ixp4xx/dsmg600-power.c	2008-01-11 16:20:26.000000000 +1030
++++ linux-2.6.23.12-armeb/arch/arm/mach-ixp4xx/dsmg600-power.c	2008-01-11 16:20:30.000000000 +1030
+@@ -26,10 +26,9 @@
+ #include <linux/jiffies.h>
+ #include <linux/timer.h>
+ 
++#include <asm/gpio.h>
+ #include <asm/mach-types.h>
+ 
+-extern void ctrl_alt_del(void);
+-
+ /* This is used to make sure the power-button pusher is serious.  The button
+  * must be held until the value of this counter reaches zero.
+  */
+@@ -47,9 +46,16 @@
+ 	 * state of the power button.
+ 	 */
+ 
+-	if (*IXP4XX_GPIO_GPINR & DSMG600_PB_BM) {
++	if (gpio_get_value(DSMG600_PB_GPIO)) {
  
  		/* IO Pin is 1 (button pushed) */
 +		if (power_button_countdown > 0) {
@@ -20,7 +47,7 @@ Index: linux-2.6.22-rc5-armeb/arch/arm/mach-ixp4xx/dsmg600-power.c
  		if (power_button_countdown == 0) {
  			/* Signal init to do the ctrlaltdel action, this will bypass
  			 * init if it hasn't started and do a kernel_restart.
-@@ -58,11 +65,9 @@
+@@ -58,11 +64,9 @@
  
  			/* Change the state of the power LED to "blink" */
  			gpio_line_set(DSMG600_LED_PWR_GPIO, IXP4XX_GPIO_LOW);
@@ -34,3 +61,51 @@ Index: linux-2.6.22-rc5-armeb/arch/arm/mach-ixp4xx/dsmg600-power.c
  	}
  
  	mod_timer(&dsmg600_power_timer, jiffies + msecs_to_jiffies(500));
+@@ -81,12 +85,12 @@
+ 	if (!(machine_is_dsmg600()))
+ 		return 0;
+ 
+-	if (request_irq(DSMG600_RB_IRQ, &dsmg600_reset_handler,
++	if (request_irq(gpio_to_irq(DSMG600_RB_GPIO), &dsmg600_reset_handler,
+ 		IRQF_DISABLED | IRQF_TRIGGER_LOW, "DSM-G600 reset button",
+ 		NULL) < 0) {
+ 
+ 		printk(KERN_DEBUG "Reset Button IRQ %d not available\n",
+-			DSMG600_RB_IRQ);
++			gpio_to_irq(DSMG600_RB_GPIO));
+ 
+ 		return -EIO;
+ 	}
+@@ -114,7 +118,7 @@
+ 
+ 	del_timer_sync(&dsmg600_power_timer);
+ 
+-	free_irq(DSMG600_RB_IRQ, NULL);
++	free_irq(gpio_to_irq(DSMG600_RB_GPIO), NULL);
+ }
+ 
+ module_init(dsmg600_power_init);
+Index: linux-2.6.23.12-armeb/include/asm-arm/arch-ixp4xx/dsmg600.h
+===================================================================
+--- linux-2.6.23.12-armeb.orig/include/asm-arm/arch-ixp4xx/dsmg600.h	2008-01-11 16:20:26.000000000 +1030
++++ linux-2.6.23.12-armeb/include/asm-arm/arch-ixp4xx/dsmg600.h	2008-01-11 16:20:30.000000000 +1030
+@@ -40,18 +40,13 @@
+ /* Buttons */
+ 
+ #define DSMG600_PB_GPIO		15	/* power button */
+-#define DSMG600_PB_BM		(1L << DSMG600_PB_GPIO)
+-
+ #define DSMG600_RB_GPIO		3	/* reset button */
+ 
+-#define DSMG600_RB_IRQ		IRQ_IXP4XX_GPIO3
++/* Power control */
+ 
+ #define DSMG600_PO_GPIO		2	/* power off */
+ 
+ /* LEDs */
+ 
+ #define DSMG600_LED_PWR_GPIO	0
+-#define DSMG600_LED_PWR_BM	(1L << DSMG600_LED_PWR_GPIO)
+-
+ #define DSMG600_LED_WLAN_GPIO	14
+-#define DSMG600_LED_WLAN_BM	(1L << DSMG600_LED_WLAN_GPIO)
diff --git a/target/linux/ixp4xx/patches-2.6.23/017-nas100d_auto_power_on.patch b/target/linux/ixp4xx/patches-2.6.23/017-nas100d_auto_power_on.patch
index 232dd9a8c..b77df4850 100644
--- a/target/linux/ixp4xx/patches-2.6.23/017-nas100d_auto_power_on.patch
+++ b/target/linux/ixp4xx/patches-2.6.23/017-nas100d_auto_power_on.patch
@@ -1,19 +1,27 @@
----
- arch/arm/mach-ixp4xx/nas100d-power.c  |   68 ++++++++++++++++++++++++++++++++--
- include/asm-arm/arch-ixp4xx/nas100d.h |   18 +++++----
- 2 files changed, 75 insertions(+), 11 deletions(-)
+Upgrade the power and reset button handling for the NAS100D:
+ * Convert GPIO and IRQ handling to use the <asm/gpio.h> api.
+ * Perform the reset only after the power button has been held down
+   for at least two seconds.  Do the reset on the release of the power
+   button, so that NAS devices which have been set to auto-power-on (by
+   bridging the power button) do not continuously power cycle.
+ * Remove all superflous constants from nas100d.h
+ * Add LED constants to nas100d.h while we're there.
+Also, update the board LED setup code to use constants.
 
-Index: linux-2.6.22-rc5-armeb/arch/arm/mach-ixp4xx/nas100d-power.c
+Signed-off-by: Rod Whitby <rod@whitby.id.au>
+
+Index: linux-2.6.23.12-armeb/arch/arm/mach-ixp4xx/nas100d-power.c
 ===================================================================
---- linux-2.6.22-rc5-armeb.orig/arch/arm/mach-ixp4xx/nas100d-power.c
-+++ linux-2.6.22-rc5-armeb/arch/arm/mach-ixp4xx/nas100d-power.c
-@@ -21,15 +21,60 @@
+--- linux-2.6.23.12-armeb.orig/arch/arm/mach-ixp4xx/nas100d-power.c	2008-01-11 16:59:20.000000000 +1030
++++ linux-2.6.23.12-armeb/arch/arm/mach-ixp4xx/nas100d-power.c	2008-01-11 17:03:23.000000000 +1030
+@@ -21,15 +21,61 @@
  #include <linux/irq.h>
  #include <linux/module.h>
  #include <linux/reboot.h>
 +#include <linux/jiffies.h>
 +#include <linux/timer.h>
  
++#include <asm/gpio.h>
  #include <asm/mach-types.h>
  
 -static irqreturn_t nas100d_reset_handler(int irq, void *dev_id)
@@ -39,7 +47,7 @@ Index: linux-2.6.22-rc5-armeb/arch/arm/mach-ixp4xx/nas100d-power.c
  	 */
 -	ctrl_alt_del();
 +
-+	if (*IXP4XX_GPIO_GPINR & NAS100D_PB_BM) {
++	if (gpio_get_value(NAS100D_PB_GPIO)) {
 +
 +		/* IO Pin is 1 (button pushed) */
 +		if (power_button_countdown > 0) {
@@ -72,7 +80,21 @@ Index: linux-2.6.22-rc5-armeb/arch/arm/mach-ixp4xx/nas100d-power.c
  
  	return IRQ_HANDLED;
  }
-@@ -50,6 +95,19 @@
+@@ -39,17 +85,30 @@
+ 	if (!(machine_is_nas100d()))
+ 		return 0;
+ 
+-	set_irq_type(NAS100D_RB_IRQ, IRQT_LOW);
++	set_irq_type(gpio_to_irq(NAS100D_RB_GPIO), IRQT_LOW);
+ 
+-	if (request_irq(NAS100D_RB_IRQ, &nas100d_reset_handler,
++	if (request_irq(gpio_to_irq(NAS100D_RB_GPIO), &nas100d_reset_handler,
+ 		IRQF_DISABLED, "NAS100D reset button", NULL) < 0) {
+ 
+ 		printk(KERN_DEBUG "Reset Button IRQ %d not available\n",
+-			NAS100D_RB_IRQ);
++			gpio_to_irq(NAS100D_RB_GPIO));
+ 
  		return -EIO;
  	}
  
@@ -92,42 +114,75 @@ Index: linux-2.6.22-rc5-armeb/arch/arm/mach-ixp4xx/nas100d-power.c
  	return 0;
  }
  
-@@ -58,6 +116,8 @@
+@@ -58,7 +117,9 @@
  	if (!(machine_is_nas100d()))
  		return;
  
+-	free_irq(NAS100D_RB_IRQ, NULL);
 +	del_timer_sync(&nas100d_power_timer);
 +
- 	free_irq(NAS100D_RB_IRQ, NULL);
++	free_irq(gpio_to_irq(NAS100D_RB_GPIO), NULL);
  }
  
-Index: linux-2.6.22-rc5-armeb/include/asm-arm/arch-ixp4xx/nas100d.h
+ module_init(nas100d_power_init);
+Index: linux-2.6.23.12-armeb/include/asm-arm/arch-ixp4xx/nas100d.h
 ===================================================================
---- linux-2.6.22-rc5-armeb.orig/include/asm-arm/arch-ixp4xx/nas100d.h
-+++ linux-2.6.22-rc5-armeb/include/asm-arm/arch-ixp4xx/nas100d.h
-@@ -39,14 +39,18 @@
+--- linux-2.6.23.12-armeb.orig/include/asm-arm/arch-ixp4xx/nas100d.h	2008-01-11 16:59:20.000000000 +1030
++++ linux-2.6.23.12-armeb/include/asm-arm/arch-ixp4xx/nas100d.h	2008-01-11 17:03:23.000000000 +1030
+@@ -38,15 +38,15 @@
+ 
  /* Buttons */
  
- #define NAS100D_PB_GPIO         14
-+#define NAS100D_PB_BM           (1L << NAS100D_PB_GPIO)
+-#define NAS100D_PB_GPIO         14
+-#define NAS100D_RB_GPIO         4
++#define NAS100D_PB_GPIO         14   /* power button */
++#define NAS100D_RB_GPIO         4    /* reset button */
++
++/* Power control */
 +
- #define NAS100D_RB_GPIO         4
--#define NAS100D_PO_GPIO         12   /* power off */
+ #define NAS100D_PO_GPIO         12   /* power off */
  
 -#define NAS100D_PB_IRQ          IRQ_IXP4XX_GPIO14
- #define NAS100D_RB_IRQ          IRQ_IXP4XX_GPIO4
+-#define NAS100D_RB_IRQ          IRQ_IXP4XX_GPIO4
++/* LEDs */
  
 -/*
 -#define NAS100D_PB_BM           (1L << NAS100D_PB_GPIO)
 -#define NAS100D_PO_BM           (1L << NAS100D_PO_GPIO)
 -#define NAS100D_RB_BM           (1L << NAS100D_RB_GPIO)
 -*/
-+#define NAS100D_PO_GPIO         12   /* power off */
-+
-+/* LEDs */
-+
-+#define NAS100D_LED_PWR_GPIO	15
-+#define NAS100D_LED_PWR_BM	(1L << NAS100D_LED_PWR_GPIO)
-+
 +#define NAS100D_LED_WLAN_GPIO	0
-+#define NAS100D_LED_WLAN_BM	(1L << NAS100D_LED_WLAN_GPIO)
++#define NAS100D_LED_DISK_GPIO	3
++#define NAS100D_LED_PWR_GPIO	15
+Index: linux-2.6.23.12-armeb/arch/arm/mach-ixp4xx/nas100d-setup.c
+===================================================================
+--- linux-2.6.23.12-armeb.orig/arch/arm/mach-ixp4xx/nas100d-setup.c	2008-01-11 17:03:23.000000000 +1030
++++ linux-2.6.23.12-armeb/arch/arm/mach-ixp4xx/nas100d-setup.c	2008-01-11 17:06:15.000000000 +1030
+@@ -44,20 +44,20 @@
+ static struct resource nas100d_led_resources[] = {
+ 	{
+ 		.name		= "wlan",   /* green led */
+-		.start		= 0,
+-		.end		= 0,
++		.start		= NAS100D_LED_WLAN_GPIO,
++		.end		= NAS100D_LED_WLAN_GPIO,
+ 		.flags		= IXP4XX_GPIO_LOW,
+ 	},
+ 	{
+-		.name		= "ready",  /* blue power led (off is flashing!) */
+-		.start		= 15,
+-		.end		= 15,
++		.name		= "power",  /* blue power led (off is flashing!) */
++		.start		= NAS100D_LED_PWR_GPIO,
++		.end		= NAS100D_LED_PWR_GPIO,
+ 		.flags		= IXP4XX_GPIO_LOW,
+ 	},
+ 	{
+ 		.name		= "disk",   /* yellow led */
+-		.start		= 3,
+-		.end		= 3,
++		.start		= NAS100D_LED_DISK_GPIO,
++		.end		= NAS100D_LED_DISK_GPIO,
+ 		.flags		= IXP4XX_GPIO_LOW,
+ 	},
+ };