Add realtek target files

Signed-off-by: Roman Yeryomin <roman@advem.lv>

1 files changed, 122 insertions, 0 deletions

diff --git a/target/linux/realtek/files/include/net80211/Makefile b/target/linux/realtek/files/include/net80211/Makefile
new file mode 100644
index 000000000..659470194
--- /dev/null
+++ b/target/linux/realtek/files/include/net80211/Makefile
@@ -0,0 +1,122 @@
+#
+# Copyright (c) 2002-2005 Sam Leffler, Errno Consulting
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer,
+#    without modification.
+# 2. Redistributions in binary form must reproduce at minimum a disclaimer
+#    similar to the "NO WARRANTY" disclaimer below ("Disclaimer") and any
+#    redistribution must be conditioned upon including a substantially
+#    similar Disclaimer requirement for further binary redistribution.
+# 3. Neither the names of the above-listed copyright holders nor the names
+#    of any contributors may be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# Alternatively, this software may be distributed under the terms of the
+# GNU General Public License ("GPL") version 2 as published by the Free
+# Software Foundation.
+#
+# NO WARRANTY
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTIBILITY
+# AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
+# THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY,
+# OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
+# IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
+# THE POSSIBILITY OF SUCH DAMAGES.
+#
+# $Id: //depot/sw/linuxsrc/src/802_11/madwifi/madwifi/net80211/Makefile#12 $
+#
+
+#
+# Makefile for the 802.11 WLAN modules.
+#
+ifeq ($(obj),)
+obj=	.
+endif
+
+TOP = $(obj)/..
+#
+# There are two authenticator mechanisms: an in-kernel implementation
+# (wlan_auth+wlan_radius) and an external implementation (wlan_xauth) that
+# requires a user process to manage the authentication process.  By default
+# the external authenticator is used.  ieee80211_proto.c has a table of module
+# names that defines the default module to auto-load for each authentication
+# scheme; to get the in-kernel authenticator by default modify it to load
+# wlan_auth instead of wlan_xauth or manually load wlan_auth prior to use.
+# 
+MOD_AUTH	:= wlan_xauth.o
+#
+# Scanning policy is split into modules.  The default policy modules
+# separate station-mode scanning support from ap-mode scanning support.
+#
+MOD_SCAN	:= wlan_scan_sta.o wlan_scan_ap.o
+#
+# Modules to be built+installed
+#
+MOD_INSTALL	:= wlan.o wlan_wep.o wlan_tkip.o wlan_ccmp.o wlan_acl.o \
+		   $(MOD_AUTH) $(MOD_SCAN)
+
+obj-m		+= $(MOD_INSTALL)
+
+wlan-objs	:= if_media.o \
+		   ieee80211.o ieee80211_beacon.o ieee80211_crypto.o \
+		   ieee80211_crypto_none.o ieee80211_input.o ieee80211_node.o \
+		   ieee80211_output.o ieee80211_power.o ieee80211_proto.o \
+		   ieee80211_scan.o ieee80211_wireless.o ieee80211_linux.o \
+		   ieee80211_monitor.o ieee80211_rate.o
+wlan_wep-objs	:= ieee80211_crypto_wep.o
+wlan_tkip-objs	:= ieee80211_crypto_tkip.o
+wlan_ccmp-objs	:= ieee80211_crypto_ccmp.o
+wlan_acl-objs	:= ieee80211_acl.o
+wlan_xauth-objs	:= ieee80211_xauth.o
+wlan_scan_sta-objs :=ieee80211_scan_sta.o
+wlan_scan_ap-objs := ieee80211_scan_ap.o
+
+include $(TOP)/Makefile.inc
+
+INCS += -I$(TOP) -I$(ATH_HAL) -I$(HAL)
+
+EXTRA_CFLAGS+=$(INCS) $(COPTS)
+
+-include $(TOPDIR)/Rules.make
+
+all:
+	$(MAKE) -C $(KERNELPATH) SUBDIRS=$(shell pwd) modules
+
+wlan.o:	$(wlan-objs)
+	$(LD) $(LDOPTS) -o wlan.$(KMODSUF) -r $(wlan-objs)
+wlan_wep.o:	$(wlan_wep-objs)
+	$(LD) $(LDOPTS) -o wlan_wep.$(KMODSUF) -r $(wlan_wep-objs)
+wlan_tkip.o:	$(wlan_tkip-objs)
+	$(LD) $(LDOPTS) -o wlan_tkip.$(KMODSUF) -r $(wlan_tkip-objs)
+wlan_ccmp.o:	$(wlan_ccmp-objs)
+	$(LD) $(LDOPTS) -o wlan_ccmp.$(KMODSUF) -r $(wlan_ccmp-objs)
+wlan_scan_sta.o: $(wlan_scan_sta-objs)
+	$(LD) $(LDOPTS) -o wlan_scan_sta.$(KMODSUF) -r $(wlan_scan_sta-objs)
+wlan_scan_ap.o:	$(wlan_scan_ap-objs)
+	$(LD) $(LDOPTS) -o wlan_scan_ap.$(KMODSUF) -r $(wlan_scan_ap-objs)
+wlan_xauth.o:	$(wlan_xauth-objs)
+	$(LD) $(LDOPTS) -o wlan_xauth.$(KMODSUF) -r $(wlan_xauth-objs)
+wlan_acl.o:	$(wlan_acl-objs)
+	$(LD) $(LDOPTS) -o wlan_acl.$(KMODSUF) -r $(wlan_acl-objs)
+
+install:
+	test -d $(DESTDIR)/$(KMODPATH) || mkdir -p $(DESTDIR)/$(KMODPATH)
+	for i in $(MOD_INSTALL); do \
+		f=`basename $$i .o`; \
+		install $$f.$(KMODSUF) $(DESTDIR)/$(KMODPATH); \
+	done
+
+clean:
+	-rm -f *~ *.o *.ko *.mod.c
+	-rm -f .depend .version .*.o.flags .*.o.d .*.o.cmd .*.ko.cmd
+	-rm -rf .tmp_versions