From 5deb3317cb51ac52de922bb55f8492624018906d Mon Sep 17 00:00:00 2001 From: Roman Yeryomin Date: Thu, 13 Sep 2012 00:40:35 +0300 Subject: Add realtek target files Signed-off-by: Roman Yeryomin --- .../linux/realtek/files/include/net80211/Makefile | 122 +++++++++++++++++++++ 1 file changed, 122 insertions(+) create mode 100644 target/linux/realtek/files/include/net80211/Makefile (limited to 'target/linux/realtek/files/include/net80211/Makefile') diff --git a/target/linux/realtek/files/include/net80211/Makefile b/target/linux/realtek/files/include/net80211/Makefile new file mode 100644 index 000000000..659470194 --- /dev/null +++ b/target/linux/realtek/files/include/net80211/Makefile @@ -0,0 +1,122 @@ +# +# Copyright (c) 2002-2005 Sam Leffler, Errno Consulting +# All rights reserved. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer, +# without modification. +# 2. Redistributions in binary form must reproduce at minimum a disclaimer +# similar to the "NO WARRANTY" disclaimer below ("Disclaimer") and any +# redistribution must be conditioned upon including a substantially +# similar Disclaimer requirement for further binary redistribution. +# 3. Neither the names of the above-listed copyright holders nor the names +# of any contributors may be used to endorse or promote products derived +# from this software without specific prior written permission. +# +# Alternatively, this software may be distributed under the terms of the +# GNU General Public License ("GPL") version 2 as published by the Free +# Software Foundation. +# +# NO WARRANTY +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTIBILITY +# AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL +# THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, +# OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF +# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS +# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER +# IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF +# THE POSSIBILITY OF SUCH DAMAGES. +# +# $Id: //depot/sw/linuxsrc/src/802_11/madwifi/madwifi/net80211/Makefile#12 $ +# + +# +# Makefile for the 802.11 WLAN modules. +# +ifeq ($(obj),) +obj= . +endif + +TOP = $(obj)/.. +# +# There are two authenticator mechanisms: an in-kernel implementation +# (wlan_auth+wlan_radius) and an external implementation (wlan_xauth) that +# requires a user process to manage the authentication process. By default +# the external authenticator is used. ieee80211_proto.c has a table of module +# names that defines the default module to auto-load for each authentication +# scheme; to get the in-kernel authenticator by default modify it to load +# wlan_auth instead of wlan_xauth or manually load wlan_auth prior to use. +# +MOD_AUTH := wlan_xauth.o +# +# Scanning policy is split into modules. The default policy modules +# separate station-mode scanning support from ap-mode scanning support. +# +MOD_SCAN := wlan_scan_sta.o wlan_scan_ap.o +# +# Modules to be built+installed +# +MOD_INSTALL := wlan.o wlan_wep.o wlan_tkip.o wlan_ccmp.o wlan_acl.o \ + $(MOD_AUTH) $(MOD_SCAN) + +obj-m += $(MOD_INSTALL) + +wlan-objs := if_media.o \ + ieee80211.o ieee80211_beacon.o ieee80211_crypto.o \ + ieee80211_crypto_none.o ieee80211_input.o ieee80211_node.o \ + ieee80211_output.o ieee80211_power.o ieee80211_proto.o \ + ieee80211_scan.o ieee80211_wireless.o ieee80211_linux.o \ + ieee80211_monitor.o ieee80211_rate.o +wlan_wep-objs := ieee80211_crypto_wep.o +wlan_tkip-objs := ieee80211_crypto_tkip.o +wlan_ccmp-objs := ieee80211_crypto_ccmp.o +wlan_acl-objs := ieee80211_acl.o +wlan_xauth-objs := ieee80211_xauth.o +wlan_scan_sta-objs :=ieee80211_scan_sta.o +wlan_scan_ap-objs := ieee80211_scan_ap.o + +include $(TOP)/Makefile.inc + +INCS += -I$(TOP) -I$(ATH_HAL) -I$(HAL) + +EXTRA_CFLAGS+=$(INCS) $(COPTS) + +-include $(TOPDIR)/Rules.make + +all: + $(MAKE) -C $(KERNELPATH) SUBDIRS=$(shell pwd) modules + +wlan.o: $(wlan-objs) + $(LD) $(LDOPTS) -o wlan.$(KMODSUF) -r $(wlan-objs) +wlan_wep.o: $(wlan_wep-objs) + $(LD) $(LDOPTS) -o wlan_wep.$(KMODSUF) -r $(wlan_wep-objs) +wlan_tkip.o: $(wlan_tkip-objs) + $(LD) $(LDOPTS) -o wlan_tkip.$(KMODSUF) -r $(wlan_tkip-objs) +wlan_ccmp.o: $(wlan_ccmp-objs) + $(LD) $(LDOPTS) -o wlan_ccmp.$(KMODSUF) -r $(wlan_ccmp-objs) +wlan_scan_sta.o: $(wlan_scan_sta-objs) + $(LD) $(LDOPTS) -o wlan_scan_sta.$(KMODSUF) -r $(wlan_scan_sta-objs) +wlan_scan_ap.o: $(wlan_scan_ap-objs) + $(LD) $(LDOPTS) -o wlan_scan_ap.$(KMODSUF) -r $(wlan_scan_ap-objs) +wlan_xauth.o: $(wlan_xauth-objs) + $(LD) $(LDOPTS) -o wlan_xauth.$(KMODSUF) -r $(wlan_xauth-objs) +wlan_acl.o: $(wlan_acl-objs) + $(LD) $(LDOPTS) -o wlan_acl.$(KMODSUF) -r $(wlan_acl-objs) + +install: + test -d $(DESTDIR)/$(KMODPATH) || mkdir -p $(DESTDIR)/$(KMODPATH) + for i in $(MOD_INSTALL); do \ + f=`basename $$i .o`; \ + install $$f.$(KMODSUF) $(DESTDIR)/$(KMODPATH); \ + done + +clean: + -rm -f *~ *.o *.ko *.mod.c + -rm -f .depend .version .*.o.flags .*.o.d .*.o.cmd .*.ko.cmd + -rm -rf .tmp_versions -- cgit v1.2.3