summaryrefslogtreecommitdiffstats
path: root/target/linux/realtek/files/arch/rlx/bsp
diff options
context:
space:
mode:
authorArtur Artamonov <freeartman@wechall.net>2013-08-22 09:32:02 +0300
committerArtur Artamonov <freeartman@wechall.net>2013-08-22 09:32:02 +0300
commit2d0b9e4ca9625491611a722c22cfa48601d0669b (patch)
treef889eea124984b0266998fe4a53b5f282639b9ad /target/linux/realtek/files/arch/rlx/bsp
parentd4bc867ac3afd260e4256e1463b273083769a363 (diff)
[realte] merged bspfiles for 96c/9xD
Diffstat (limited to 'target/linux/realtek/files/arch/rlx/bsp')
l---------target/linux/realtek/files/arch/rlx/bsp1
-rw-r--r--target/linux/realtek/files/arch/rlx/bsp/Makefile18
-rw-r--r--target/linux/realtek/files/arch/rlx/bsp/bspchip.h571
-rw-r--r--target/linux/realtek/files/arch/rlx/bsp/bspcpu.h54
-rw-r--r--target/linux/realtek/files/arch/rlx/bsp/bspinit.h18
-rw-r--r--target/linux/realtek/files/arch/rlx/bsp/irq.c380
-rw-r--r--target/linux/realtek/files/arch/rlx/bsp/kgdb.c81
-rw-r--r--target/linux/realtek/files/arch/rlx/bsp/pci.c1265
-rw-r--r--target/linux/realtek/files/arch/rlx/bsp/prom.c184
-rw-r--r--target/linux/realtek/files/arch/rlx/bsp/rlxhack.h21
-rw-r--r--target/linux/realtek/files/arch/rlx/bsp/serial.c94
-rw-r--r--target/linux/realtek/files/arch/rlx/bsp/setup.c193
-rw-r--r--target/linux/realtek/files/arch/rlx/bsp/timer.c146
-rw-r--r--target/linux/realtek/files/arch/rlx/bsp/vmlinux.lds.S296
14 files changed, 3321 insertions, 1 deletions
diff --git a/target/linux/realtek/files/arch/rlx/bsp b/target/linux/realtek/files/arch/rlx/bsp
deleted file mode 120000
index ec617b832..000000000
--- a/target/linux/realtek/files/arch/rlx/bsp
+++ /dev/null
@@ -1 +0,0 @@
-bsp_rtl8196c \ No newline at end of file
diff --git a/target/linux/realtek/files/arch/rlx/bsp/Makefile b/target/linux/realtek/files/arch/rlx/bsp/Makefile
new file mode 100644
index 000000000..0542f0a9e
--- /dev/null
+++ b/target/linux/realtek/files/arch/rlx/bsp/Makefile
@@ -0,0 +1,18 @@
+include $(TOPDIR)/.config
+
+core-y += arch/rlx/bsp/
+cflags-y += -Iinclude/asm-rlx -Iarch/rlx/bsp/
+#load-y += 0xffffffff80000000
+load-y += 0x80000000
+
+extra-y += vmlinux.lds
+
+obj-y := irq.o prom.o serial.o setup.o timer.o
+obj-$(CONFIG_PCI) += pci.o
+
+EXTRA_AFLAGS := $(CFLAGS)
+EXTRA_CFLAGS += -I$(TOPDIR)/drivers/net/rtl819x/AsicDriver
+EXTRA_CFLAGS += -I$(TOPDIR)/drivers/net/rtl819x/common
+ifdef CONFIG_RTL_819X_SWCORE
+EXTRA_CFLAGS += -DCONFIG_RTL_819X_SWCORE
+endif
diff --git a/target/linux/realtek/files/arch/rlx/bsp/bspchip.h b/target/linux/realtek/files/arch/rlx/bsp/bspchip.h
new file mode 100644
index 000000000..0df3f510e
--- /dev/null
+++ b/target/linux/realtek/files/arch/rlx/bsp/bspchip.h
@@ -0,0 +1,571 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * Copyright (C) 2006, Realtek Semiconductor Corp.
+ * Copyright (C) 2013, Artur Artamonov <artur@advem.lv>
+ */
+
+#ifndef __LEXRA_BSP_H
+#define __LEXRA_BSP_H
+
+#include <linux/autoconf.h>
+
+#include "rlxhack.h"
+
+#define PADDR(addr) ((addr) & 0x1FFFFFFF)
+
+/*
+ * IRQ Controller
+ */
+#define BSP_IRQ_CPU_BASE 0
+#define BSP_IRQ_CPU_NUM 8
+
+#define BSP_IRQ_LOPI_BASE (BSP_IRQ_CPU_BASE + BSP_IRQ_CPU_NUM)
+#define BSP_IRQ_LOPI_NUM 8
+
+#define BSP_IRQ_ICTL_BASE (BSP_IRQ_LOPI_BASE + BSP_IRQ_LOPI_NUM)
+#define BSP_IRQ_ICTL_NUM 32
+
+/*
+ * ====================================
+ * Platform Configurable Common Options
+ * ====================================
+ */
+
+#define BSP_SYS_CLK_RATE (200000000) //HS1 clock : 200 MHz
+#define BSP_BAUDRATE 38400 // ex. 19200 or 38400 or 57600 or 115200
+ //For Early Debug
+
+/*
+ * RTL8196b Interrupt Scheme (Subject to change)
+ *
+ * Source EXT_INT CPU INT LOPI IRQ
+ * -------- ------- ------- ------- ------
+ * PCIB0TO 0 2 - 16+0
+ * PCIB1TO 1 2 - 16+1
+ * LBCTMOm0 2 2 - 16+2
+ * LBCTMOm1 3 2 - 16+3
+ * LBCTMOs 4 2 - 16+4
+ * TIMER0 8 - 5 8+5
+ * TIMER1 9 2 - 16+9
+ * USB 10 - 1 8+1
+ * UART0 12 2 - 16+12
+ * UART1 13 2 - 16+13
+ * VoIP 14 2 - 16+14
+ * SWCORE 15 - 4 8+4
+ * GPIO_ABCD 16 2 - 16+16
+ * GPIO_EFGH 17 2 - 16+17
+ * NFBI 18 - 6 8+6
+ * PCM 19 - 7 8+7
+ * CRYPTO 20 2 - 16+20
+ * PCIE0 21 - 2 8+2
+ * PCIE1 22 - 3 8+3
+ * I2S 26 - 0 8+6
+ */
+
+/*
+ * IRQ Mapping
+ */
+#define BSP_ICTL_IRQ (BSP_IRQ_CPU_BASE + 2) //for irq cascade
+
+//----------------------------------------------------------------------
+#if defined(CONFIG_RTL_8196C)
+#define BSP_ICTL_IRQ (BSP_IRQ_CPU_BASE + 2) //for irq cascade
+#define BSP_TC0_IRQ (13) /* BSP_IRQ_LOPI_BASE + 5 */
+#define BSP_TC1_IRQ (BSP_IRQ_ICTL_BASE + 15)
+#define BSP_USB_IRQ (10) /* BSP_IRQ_LOPI_BASE + 2 */
+//#define BSP_UART0_IRQ (BSP_IRQ_ICTL_BASE + 0)
+#define BSP_UART0_IRQ (BSP_IRQ_ICTL_BASE + 7) /* BSP_IRQ_LOPI_BASE + 0 */
+#define BSP_SWCORE_IRQ (12) /* BSP_IRQ_LOPI_BASE + 4 */
+#define BSP_GPIO_ABCD_IRQ (BSP_IRQ_ICTL_BASE + 9)
+#define BSP_PCIE_IRQ (11) /* BSP_IRQ_LOPI_BASE + 3 */
+#define BSP_NFBI_IRQ 15) /* BSP_IRQ_LOPI_BASE + 7 */
+//----------------------------------------------------------------------
+
+//#elseif CONFIG_RTL_819XD
+#elif defined(CONFIG_RTL_819XD)
+#define BSP_PCIB0TMO_IRQ (BSP_IRQ_ICTL_BASE + 0)
+#define BSP_PCIB1TMO_IRQ (BSP_IRQ_ICTL_BASE + 1)
+#define BSP_LBCTMOm0_IRQ (BSP_IRQ_ICTL_BASE + 2)
+#define BSP_LBCTMOm1_IRQ (BSP_IRQ_ICTL_BASE + 3)
+#define BSP_LBCTMOs_IRQ (BSP_IRQ_ICTL_BASE + 4)
+#define BSP_TC0_IRQ (13) /* BSP_IRQ_LOPI_BASE + 5 */
+#define BSP_TC1_IRQ (BSP_IRQ_ICTL_BASE + 9)
+#define BSP_USB_IRQ (10) /* BSP_IRQ_LOPI_BASE + 2 */
+#define BSP_OTG_IRQ (15) //(BSP_IRQ_LOPI_BASE + 7) //wei add ,bit 15=8+7
+//#define BSP_UART0_IRQ (BSP_IRQ_ICTL_BASE + 0)
+#define BSP_UART0_IRQ (8) /* BSP_IRQ_LOPI_BASE + 0 */
+#define BSP_UART1_IRQ (BSP_IRQ_ICTL_BASE + 13)
+#define BSP_SWCORE_IRQ (12) /* BSP_IRQ_LOPI_BASE + 4 */
+#define BSP_GPIO_ABCD_IRQ (BSP_IRQ_ICTL_BASE + 16)
+#define BSP_GPIO_EFGH_IRQ (BSP_IRQ_ICTL_BASE + 17)
+#define BSP_NFBI_IRQ (15) /* BSP_IRQ_LOPI_BASE + 7 */
+#define BSP_PCM_IRQ (9) /* BSP_IRQ_LOPI_BASE + 1 */
+#define BSP_CRYPTO_IRQ (BSP_IRQ_ICTL_BASE + 20)
+#define BSP_GDMA_IRQ (BSP_IRQ_ICTL_BASE + 23)
+#define BSP_PCIE_IRQ (11) /* BSP_IRQ_LOPI_BASE + 3 */
+#define BSP_PCIE2_IRQ (14) /* BSP_IRQ_LOPI_BASE + 6 */
+//#define BSP_I2S_IRQ (BSP_IRQ_LOPI_BASE + 0)
+//#define BSP_I2S_IRQ (BSP_IRQ_ICTL_BASE + 12)
+#endif
+/*
+ * Interrupt Routing Selection
+ */
+#define BSP_IRQ_CASCADE 2
+#define BSP_PTM_RS BSP_IRQ_CASCADE
+#define BSP_LBCTMOs2_RS BSP_IRQ_CASCADE
+#define BSP_LBCTMOs1_RS BSP_IRQ_CASCADE
+#define BSP_PKT_RS BSP_IRQ_CASCADE
+#define BSP_SPI_RS BSP_IRQ_CASCADE
+#define BSP_NIC100_RS BSP_IRQ_CASCADE
+#define BSP_SAR_RS BSP_IRQ_CASCADE
+#define BSP_DMT_RS BSP_IRQ_CASCADE
+#define BSP_PCIE_RS BSP_PCIE_IRQ
+#define BSP_PCIE2_RS BSP_PCIE2_IRQ
+#define BSP_GDMA_RS BSP_IRQ_CASCADE
+#define BSP_SECURITY_RS BSP_IRQ_CASCADE
+#if defined(CONFIG_RTL_8196C)
+ #define BSP_PCM_RS BSP_IRQ_CASCADE
+#else
+ #define BSP_PCM_RS BSP_PCM_IRQ
+#endif
+#define BSP_NFBI_RS BSP_NFBI_IRQ
+#define BSP_GPIO_EFGH_RS BSP_IRQ_CASCADE
+#define BSP_GPIO_ABCD_RS BSP_IRQ_CASCADE
+#define BSP_SW_RS BSP_SWCORE_IRQ
+//#define BSP_UART0_RS BSP_UART0_IRQ
+#define BSP_UART0_RS BSP_IRQ_CASCADE
+#define BSP_UART1_RS BSP_IRQ_CASCADE
+#define BSP_USB_D_RS BSP_IRQ_CASCADE
+#define BSP_USB_H_RS BSP_USB_IRQ
+#define BSP_OTG_RS BSP_OTG_IRQ
+#define BSP_TC0_RS BSP_TC0_IRQ//13
+#define BSP_TC1_RS BSP_IRQ_CASCADE
+#define BSP_LBCTMOm2_RS BSP_IRQ_CASCADE
+#define BSP_LBCTMOm1_RS BSP_IRQ_CASCADE
+#define BSP_SPEED_RS BSP_IRQ_CASCADE
+#define BSP_LBCTMOs0_RS BSP_IRQ_CASCADE
+#define BSP_LBCTMOm0_RS BSP_IRQ_CASCADE
+#define BSP_OCPTMO_RS BSP_IRQ_CASCADE
+#define BSP_PCIB0TO_RS BSP_IRQ_CASCADE
+#define BSP_NONE BSP_IRQ_CASCADE
+#define BSP_PCIB0TMO_RS BSP_IRQ_CASCADE
+#define BSP_PCIB1TMO_RS BSP_IRQ_CASCADE
+#define BSP_LBCTMOs_RS BSP_IRQ_CASCADE
+#define BSP_CRYPTO_RS BSP_IRQ_CASCADE
+//#define BSP_I2S_RS BSP_I2S_IRQ
+//#define BSP_I2S_RS BSP_IRQ_CASCADE
+
+#if defined(CONFIG_RTL_8196C)
+ #define BSP_DIVISOR 1000
+#else
+ #define BSP_DIVISOR 8000
+#endif
+
+#if BSP_DIVISOR > (1 << 16)
+#error "Exceed the Maximum Value of DivFactor"
+#endif
+
+/*
+ * ==========================
+ * Platform Register Settings
+ * ==========================
+ */
+
+/*
+ * CPU
+ */
+
+#define BSP_IMEM_BASE 0x00C00000
+#define BSP_IMEM_TOP 0x00C03FFF
+
+#define BSP_DMEM_BASE 0x00C04000
+#define BSP_DMEM_TOP 0x00C05FFF
+
+/*
+ * Memory Controller
+ */
+#define BSP_MC_MCR 0xB8001000
+#define BSP_MC_MCR_VAL 0x92A28000
+
+#define BSP_MC_MTCR0 0xB8001004
+#define BSP_MC_MTCR0_VAL 0x12120000
+
+#define BSP_MC_MTCR1 0xB8001008
+#define BSP_MC_MTCR1_VAL 0x00000FEB
+
+#define BSP_MC_PFCR 0xB8001010
+#define BSP_MC_PFCR_VAL 0x00000101
+
+
+#define BSP_MC_BASE 0xB8001000
+#define BSP_NCR (BSP_MC_BASE + 0x100)
+#define BSP_NSR (BSP_MC_BASE + 0x104)
+#define BSP_NCAR (BSP_MC_BASE + 0x108)
+#define BSP_NADDR (BSP_MC_BASE + 0x10C)
+#define BSP_NDR (BSP_MC_BASE + 0x110)
+
+#define BSP_SFCR (BSP_MC_BASE + 0x200)
+#define BSP_SFDR (BSP_MC_BASE + 0x204)
+
+/*
+* UART
+*/
+#define BSP_UART0_BASE 0xB8002000
+#define BSP_UART0_MAP_BASE 0x18002000
+#define BSP_UART0_RBR (BSP_UART0_BASE + 0x000)
+#define BSP_UART0_THR (BSP_UART0_BASE + 0x000)
+#define BSP_UART0_DLL (BSP_UART0_BASE + 0x000)
+#define BSP_UART0_IER (BSP_UART0_BASE + 0x004)
+#define BSP_UART0_DLM (BSP_UART0_BASE + 0x004)
+#define BSP_UART0_IIR (BSP_UART0_BASE + 0x008)
+#define BSP_UART0_FCR (BSP_UART0_BASE + 0x008)
+#define BSP_UART0_LCR (BSP_UART0_BASE + 0x00C)
+#define BSP_UART0_MCR (BSP_UART0_BASE + 0x010)
+#define BSP_UART0_LSR (BSP_UART0_BASE + 0x014)
+
+#define BSP_UART1_BASE 0xB8002100
+#define BSP_UART1_MAP_BASE 0x18002100
+#define BSP_UART1_RBR (BSP_UART1_BASE + 0x000)
+#define BSP_UART1_THR (BSP_UART1_BASE + 0x000)
+#define BSP_UART1_DLL (BSP_UART1_BASE + 0x000)
+#define BSP_UART1_IER (BSP_UART1_BASE + 0x004)
+#define BSP_UART1_DLM (BSP_UART1_BASE + 0x004)
+#define BSP_UART1_IIR (BSP_UART1_BASE + 0x008)
+#define BSP_UART1_FCR (BSP_UART1_BASE + 0x008)
+#define BSP_FCR_EN 0x01
+#define BSP_FCR_RXRST 0x02
+#define BSP_RXRST 0x02
+#define BSP_FCR_TXRST 0x04
+#define BSP_TXRST 0x04
+#define BSP_FCR_DMA 0x08
+#define BSP_FCR_RTRG 0xC0
+#define BSP_CHAR_TRIGGER_01 0x00
+#define BSP_CHAR_TRIGGER_04 0x40
+#define BSP_CHAR_TRIGGER_08 0x80
+#define BSP_CHAR_TRIGGER_14 0xC0
+#define BSP_UART1_LCR (BSP_UART1_BASE + 0x00C)
+#define BSP_LCR_WLN 0x03
+#define BSP_CHAR_LEN_5 0x00
+#define BSP_CHAR_LEN_6 0x01
+#define BSP_CHAR_LEN_7 0x02
+#define BSP_CHAR_LEN_8 0x03
+#define BSP_LCR_STB 0x04
+#define BSP_ONE_STOP 0x00
+#define BSP_TWO_STOP 0x04
+#define BSP_LCR_PEN 0x08
+#define BSP_PARITY_ENABLE 0x01
+#define BSP_PARITY_DISABLE 0x00
+#define BSP_LCR_EPS 0x30
+#define BSP_PARITY_ODD 0x00
+#define BSP_PARITY_EVEN 0x10
+#define BSP_PARITY_MARK 0x20
+#define BSP_PARITY_SPACE 0x30
+#define BSP_LCR_BRK 0x40
+#define BSP_LCR_DLAB 0x80
+#define BSP_DLAB 0x80
+#define BSP_UART1_MCR (BSP_UART1_BASE + 0x010)
+#define BSP_UART1_LSR (BSP_UART1_BASE + 0x014)
+#define BSP_LSR_DR 0x01
+#define BSP_RxCHAR_AVAIL 0x01
+#define BSP_LSR_OE 0x02
+#define BSP_LSR_PE 0x04
+#define BSP_LSR_FE 0x08
+#define BSP_LSR_B 0x10
+#define BSP_LSR_THRE 0x20
+#define BSP_TxCHAR_AVAIL 0x00
+#define BSP_TxCHAR_EMPTY 0x20
+#define BSP_LSR_TEMT 0x40
+#define BSP_LSR_RFE 0x80
+
+/*
+ * Interrupt Controller
+ */
+#define BSP_GIMR 0xB8003000
+
+#if defined(CONFIG_RTL_8196C)
+
+#define BSP_USB_H_IE (1 << 16)
+#define BSP_TC1_IE (1 << 15)
+#define BSP_TC0_IE (1 << 14)
+#define BSP_GDMA_IE (1 << 11)
+#define BSP_PCIE_IE (1 << 10) // shall be 22
+#define BSP_PCI_IE (1 << 10)
+#define BSP_GPIO_ABCD_IE 1 << 9)
+#define BSP_SW_IE (1 << 8)
+#define BSP_UART0_IE (1 << 7)
+
+#else
+
+#define BSP_I2S_IE (1 << 26)
+#define BSP_GDMA_IE (1 << 23)
+#define BSP_PCIE2_IE (1 << 22)
+#define BSP_PCIE_IE (1 << 21) // shall be 22
+#define BSP_CRYPTO_IE (1 << 20)
+#define BSP_PCM_IE (1 << 19)
+#define BSP_NFBI_IE (1 << 18)
+#define BSP_GPIO_EFGH_IE (1 << 17)
+#define BSP_GPIO_ABCD_IE (1 << 16)
+#define BSP_SW_IE (1 << 15)
+#define BSP_PCI_IE (1 << 14)
+#define BSP_UART1_IE (1 << 13)
+#define BSP_UART0_IE (1 << 12)
+#define BSP_OTG_IE (1 << 11) //wei add
+#define BSP_USB_H_IE (1 << 10)
+#define BSP_TC1_IE (1 << 9)
+#define BSP_TC0_IE (1 << 8)
+#define BSP_LBCTMOs_IE (1 << 4)
+#define BSP_LBCTMOm1_IE (1 << 3)
+#define BSP_LBCTMOm0_IE (1 << 2)
+#define BSP_PCIB1TO_IE (1 << 1)
+#define BSP_PCIB0TO_IE (1 << 0)
+#endif
+
+
+#define BSP_GISR 0xB8003004
+
+#if defined(CONFIG_RTL_8196C)
+
+#define BSP_USB_H_IP (1 << 16)
+#define BSP_TC1_IP (1 << 15)
+#define BSP_TC0_IP (1 << 14)
+#define BSP_GDMA_IP (1 << 11)
+#define BSP_PCIE_IP (1 << 10)
+#define BSP_PCI_IP (1 << 10)
+#define BSP_GPIO_ABCD_IP (1 << 9)
+#define BSP_SW_IP (1 << 8)
+#define BSP_UART0_IP (1 << 7)
+
+#elif defined(CONFIG_RTL_819XD)
+
+#define BSP_I2S_IP (1 << 26)
+#define BSP_GDMA_IP (1 << 23)
+#define BSP_PCIE2_IP (1 << 21)
+#define BSP_PCIE_IP (1 << 22) // shall be 22
+#define BSP_CRYPTO_IP (1 << 20)
+#define BSP_PCM_IP (1 << 19)
+#define BSP_NFBI_IP (1 << 18)
+#define BSP_GPIO_EFGH_IP (1 << 17)
+#define BSP_GPIO_ABCD_IP (1 << 16)
+#define BSP_SW_IP (1 << 15)
+#define BSP_PCI_IP (1 << 14)
+#define BSP_UART1_IP (1 << 13)
+#define BSP_UART0_IP (1 << 12)
+#define BSP_OTG_IP (1 << 11)//wei add
+#define BSP_USB_H_IP (1 << 10)
+#define BSP_TC1_IP (1 << 9)
+#define BSP_TC0_IP (1 << 8)
+#define BSP_LBCTMOs_IP (1 << 4)
+#define BSP_LBCTMOm1_IP (1 << 3)
+#define BSP_LBCTMOm0_IP (1 << 2)
+#define BSP_PCIB1TO_IP (1 << 1)
+#define BSP_PCIB0TO_IP (1 << 0)
+
+#endif
+
+//----------------------------------------------------------------------
+#define BSP_IRR0 0xB8003008
+#if defined(CONFIG_RTL_8196C)
+
+#define BSP_IRR0_SETTING ((BSP_UART0_RS << 28) | \
+ (BSP_NONE << 24) | \
+ (BSP_NONE<< 20) | \
+ (BSP_NONE << 16) | \
+ (BSP_NONE << 12) | \
+ (BSP_NONE << 8) | \
+ (BSP_NONE<< 4) | \
+ (BSP_NONE<< 0) \
+)
+
+#else
+
+#define BSP_IRR0_SETTING ((BSP_LBCTMOm2_RS << 28) | \
+ (BSP_LBCTMOm1_RS << 24) | \
+ (BSP_SPEED_RS<< 20) | \
+ (BSP_LBCTMOs0_RS << 16) | \
+ (BSP_LBCTMOm0_RS << 12) | \
+ (BSP_OCPTMO_RS << 8) | \
+ (BSP_NONE<< 4) | \
+ (BSP_PCIB0TO_RS<< 0) \
+)
+
+#endif
+
+
+#define BSP_IRR1 0xB800300C
+
+#if defined(CONFIG_RTL_8196C)
+
+#define BSP_IRR1_SETTING ((BSP_TC1_RS<<28) |\
+ (BSP_TC0_RS<<24) |\
+ (BSP_NONE<<20) |\
+ (BSP_OCPTMO_RS<<16) |\
+ (BSP_GDMA_RS<<12) |\
+ (BSP_PCIE_RS<<8) |\
+ (BSP_GPIO_ABCD_RS<<4) |\
+ (BSP_SW_RS<<0) \
+)
+#else
+
+#define BSP_IRR1_SETTING ((BSP_SW_RS<< 28) | \
+ (BSP_NONE<< 24) | \
+ (BSP_UART1_RS << 20) | \
+ (BSP_UART0_RS << 16) | \
+ (BSP_OTG_RS << 12) | \
+ (BSP_USB_H_RS << 8) | \
+ (BSP_TC1_RS << 4) | \
+ (BSP_TC0_RS << 0) \
+)
+#endif
+
+
+#define BSP_IRR2 0xB8003010
+
+#if defined(CONFIG_RTL_8196C)
+
+#define BSP_IRR2_SETTING ((BSP_NONE<< 28) | \
+ (BSP_NONE << 24) | \
+ (BSP_NONE<< 20) | \
+ (BSP_NONE<< 16) | \
+ (BSP_NONE << 12) | \
+ (BSP_NONE<< 8) | \
+ (BSP_PCM_RS << 4) | \
+ (BSP_USB_H_RS << 0) \
+)
+
+#else
+
+#define BSP_IRR2_SETTING ((BSP_GDMA_RS<< 28) | \
+ (BSP_PCIE2_RS << 24) | \
+ (BSP_PCIE_RS<< 20) | \
+ (BSP_SECURITY_RS<< 16) | \
+ (BSP_PCM_RS << 12) | \
+ (BSP_NFBI_RS<< 8) | \
+ (BSP_GPIO_EFGH_RS << 4) | \
+ (BSP_GPIO_ABCD_RS << 0) \
+)
+
+#endif
+
+
+#define BSP_IRR3 0xB8003014
+
+#if defined(CONFIG_RTL_8196C)
+
+#define BSP_IRR3_SETTING ((BSP_NONE<< 28) | \
+ (BSP_NONE << 24) | \
+ (BSP_NONE << 20) | \
+ (BSP_NONE<< 16) | \
+ (BSP_NONE<< 12) | \
+ (BSP_NONE << 8) | \
+ (BSP_NONE<< 4) | \
+ (BSP_NONE<< 0) \
+)
+
+#else
+
+#define BSP_IRR3_SETTING ((BSP_PTM_RS<< 28) | \
+ (BSP_LBCTMOs2_RS << 24) | \
+ (BSP_LBCTMOs1_RS << 20) | \
+ (BSP_PKT_RS<< 16) | \
+ (BSP_SPI_RS<< 12) | \
+ (BSP_SAR_RS<< 4) | \
+ (BSP_DMT_RS<< 0) \
+)
+
+#endif
+
+/*
+ * Timer/Counter
+ */
+#define BSP_TC_BASE 0xB8003100
+#define BSP_TC0DATA (BSP_TC_BASE + 0x00)
+#define BSP_TC1DATA (BSP_TC_BASE + 0x04)
+#define BSP_TCD_OFFSET 8
+#define BSP_TC0CN (BSP_TC_BASE + 0x08)
+#define BSP_TC1CNT (BSP_TC_BASE + 0x0C)
+#define BSP_TCCNR (BSP_TC_BASE + 0x10)
+#define BSP_TC0EN (1 << 31)
+#define BSP_TC0MODE_TIMER (1 << 30)
+#define BSP_TC1EN (1 << 29)
+#define BSP_TC1MODE_TIMER (1 << 28)
+#define BSP_TCIR (BSP_TC_BASE + 0x14)
+#define BSP_TC0IE (1 << 31)
+#define BSP_TC1IE (1 << 30)
+#define BSP_TC0IP (1 << 29)
+#define BSP_TC1IP (1 << 28)
+#define BSP_CDBR (BSP_TC_BASE + 0x18)
+#define BSP_DIVF_OFFSET 16
+#define BSP_WDTCNR (BSP_TC_BASE + 0x1C)
+
+
+/*
+ * PCIE Host Controller
+ */
+#define BSP_PCIE0_H_CFG 0xB8B00000
+#define BSP_PCIE0_H_EXT 0xB8B01000
+#define BSP_PCIE0_H_MDIO (BSP_PCIE0_H_EXT + 0x00)
+#define BSP_PCIE0_H_INTSTR (BSP_PCIE0_H_EXT + 0x04)
+#define BSP_PCIE0_H_PWRCR (BSP_PCIE0_H_EXT + 0x08)
+#define BSP_PCIE0_H_IPCFG (BSP_PCIE0_H_EXT + 0x0C)
+#define BSP_PCIE0_H_MISC (BSP_PCIE0_H_EXT + 0x10)
+#define BSP_PCIE0_D_CFG0 0xB8B10000
+#define BSP_PCIE0_D_CFG1 0xB8B11000
+#define BSP_PCIE0_D_MSG 0xB8B12000
+
+#define BSP_PCIE1_H_CFG 0xB8B20000
+#define BSP_PCIE1_H_EXT 0xB8B21000
+#define BSP_PCIE1_H_MDIO (BSP_PCIE1_H_EXT + 0x00)
+#define BSP_PCIE1_H_INTSTR (BSP_PCIE1_H_EXT + 0x04)
+#define BSP_PCIE1_H_PWRCR (BSP_PCIE1_H_EXT + 0x08)
+#define BSP_PCIE1_H_IPCFG (BSP_PCIE1_H_EXT + 0x0C)
+#define BSP_PCIE1_H_MISC (BSP_PCIE1_H_EXT + 0x10)
+#define BSP_PCIE1_D_CFG0 0xB8B30000
+#define BSP_PCIE1_D_CFG1 0xB8B31000
+#define BSP_PCIE1_D_MSG 0xB8B32000
+
+#define BSP_PCIE0_D_IO 0xB8C00000
+#define BSP_PCIE1_D_IO 0xB8E00000
+#define BSP_PCIE_FUN_OFS 0xC00000
+#define BSP_PCIE0_D_MEM 0xB9000000
+#define BSP_PCIE0_F1_D_MEM (BSP_PCIE0_D_MEM + BSP_PCIE_FUN_OFS)
+#define BSP_PCIE1_D_MEM 0xBA000000
+#define BSP_PCIE1_F1_D_MEM (BSP_PCIE1_D_MEM + BSP_PCIE_FUN_OFS)
+
+
+
+#define BSP_REVR 0xB8000000
+//becouse of
+//drivers/net/wireless/rtl8192cd/8192cd_osdep.c: In function 'rtl8192cd_init_one':
+//drivers/net/wireless/rtl8192cd/8192cd_osdep.c:5866:9: error: 'REVR' undeclared
+#define REVR 0xB8000000
+#define BSP_RTL8198_REVISION_A 0xC0000000
+#define BSP_RTL8198_REVISION_B 0xC0000001
+#define BSP_RTL8197D 0x8197C000
+#define RTL8196C_REVISION_A 0x80000001
+#define RTL8196C_REVISION_B 0x80000002
+
+
+
+#if defined(CONFIG_RTL_92D_SUPPORT)
+#define BSP_CLK_MANAGE 0xb8000010
+#endif
+
+
+#ifdef CONFIG_RTL_USB_IP_HOST_SPEEDUP
+#define __IRAM_USB //__attribute__ ((section(".iram-rtkusb")))
+//? here was taftology check orig sources
+#endif
+
+
+
+
+
+
+
+
+#endif
+
diff --git a/target/linux/realtek/files/arch/rlx/bsp/bspcpu.h b/target/linux/realtek/files/arch/rlx/bsp/bspcpu.h
new file mode 100644
index 000000000..2bcef4534
--- /dev/null
+++ b/target/linux/realtek/files/arch/rlx/bsp/bspcpu.h
@@ -0,0 +1,54 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * Copyright (C) 2006, Realtek Semiconductor Corp.
+ * Copyright (C) 2013, Artur Artamonov (artur@advem.lv)
+ */
+
+#ifndef __LEXRA_BSPCPU_H
+#define __LEXRA_BSPCPU_H
+
+#if defined(CONFIG_RTL_8196C)
+
+#define cpu_scache_size 0
+#define cpu_dcache_size ( 8 << 10)
+#define cpu_icache_size (16 << 10)
+#define cpu_scache_line 0
+#define cpu_dcache_line 16
+#define cpu_icache_line 16
+#define cpu_dcache_line_mask 0xF /*cpu_dcache_line-1*/
+#define cpu_icache_line_mask 0xF /*cpu_icache_line-1*/
+#define cpu_tlb_entry 32
+//#define cpu_mem_size (64 << 20)
+#define cpu_mem_size (32 << 20)
+//#define cpu_mem_size ((7 << 20)-16) //reserve 16 byte for firmware header
+
+#define cpu_imem_size 0
+#define cpu_dmem_size 0
+#define cpu_smem_size 0
+
+#elif defined(CONFIG_RTL_819XD)
+
+#define cpu_scache_size 0
+#define cpu_dcache_size ( 32 << 10)
+#define cpu_icache_size (64 << 10)
+#define cpu_scache_line 0
+#define cpu_dcache_line 32
+#define cpu_icache_line 32
+#define cpu_dcache_line_mask 0x1F /*cpu_dcache_line-1*/
+#define cpu_icache_line_mask 0x1F /*cpu_icache_line-1*/
+#define cpu_tlb_entry 32
+
+//#define cpu_mem_size (64 << 20)
+//#define cpu_mem_size (16 << 20)
+
+#define cpu_imem_size 0
+#define cpu_dmem_size 0
+#define cpu_smem_size 0
+
+#endif
+
+#endif
diff --git a/target/linux/realtek/files/arch/rlx/bsp/bspinit.h b/target/linux/realtek/files/arch/rlx/bsp/bspinit.h
new file mode 100644
index 000000000..e7dddccb4
--- /dev/null
+++ b/target/linux/realtek/files/arch/rlx/bsp/bspinit.h
@@ -0,0 +1,18 @@
+/*
+ * Realtek Semiconductor Corp.
+ *
+ * bspinit.h:
+ *
+ * Tony Wu (tonywu@realtek.com.tw)
+ * Dec. 7, 2007
+ */
+#ifndef __BSPINIT_H_
+#define __BSPINIT_H_
+
+.macro kernel_entry_setup
+.endm
+
+.macro smp_slave_setup
+.endm
+
+#endif
diff --git a/target/linux/realtek/files/arch/rlx/bsp/irq.c b/target/linux/realtek/files/arch/rlx/bsp/irq.c
new file mode 100644
index 000000000..489a72386
--- /dev/null
+++ b/target/linux/realtek/files/arch/rlx/bsp/irq.c
@@ -0,0 +1,380 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * Copyright (C) 2013, Artur Artamonov <artur@advem.lv>
+ */
+
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/kernel_stat.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/timex.h>
+#include <linux/slab.h>
+#include <linux/random.h>
+#include <linux/irq.h>
+
+#include <asm/bitops.h>
+#include <asm/bootinfo.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/irq_cpu.h>
+#include <asm/irq_vec.h>
+#include <asm/system.h>
+
+#include <asm/rlxregs.h>
+#include <asm/rlxbsp.h>
+#include <net/rtl/rtl_types.h>
+
+#include "bspchip.h"
+#include "rlxhack.h"
+
+static struct irqaction irq_cascade = {
+ .handler = no_action,
+ .mask = CPU_MASK_NONE,
+ .name = "cascade",
+};
+
+static void bsp_ictl_irq_mask(unsigned int irq)
+{
+ REG32(BSP_GIMR) &= ~(1 << (irq - BSP_IRQ_ICTL_BASE));
+}
+
+static void bsp_ictl_irq_unmask(unsigned int irq)
+{
+ REG32(BSP_GIMR) |= (1 << (irq - BSP_IRQ_ICTL_BASE));
+}
+
+static struct irq_chip bsp_ictl_irq = {
+ .typename = "ICTL",
+ .ack = bsp_ictl_irq_mask,
+ .mask = bsp_ictl_irq_mask,
+ .mask_ack = bsp_ictl_irq_mask,
+ .unmask = bsp_ictl_irq_unmask,
+};
+
+static void bsp_ictl_irq_dispatch(void)
+{
+ volatile unsigned int pending;
+
+ pending = REG32(BSP_GIMR) & REG32(BSP_GISR);
+
+ if (pending & BSP_UART0_IP)
+ do_IRQ(BSP_UART0_IRQ);
+#if defined(CONFIG_RTL_819XD)
+ else if (pending & BSP_UART1_IP)
+ do_IRQ(BSP_UART1_IRQ);
+#endif
+ else if (pending & BSP_TC1_IP)
+ do_IRQ(BSP_TC1_IRQ);
+#if defined(CONFIG_RTL_819XD)
+ #if CONFIG_RTL_USB_OTG //wei add
+ #if (BSP_OTG_IRQ >= BSP_IRQ_ICTL_BASE) // double check otg is ictl not lopi
+ else if (pending & BSP_OTG_IP)
+ do_IRQ(BSP_OTG_IRQ);
+ #endif
+ #endif
+ #if defined( CONFIG_RTK_VOIP ) || defined(CONFIG_PCIE_POWER_SAVING)
+ else if (pending & BSP_GPIO_ABCD_IP)
+ do_IRQ(BSP_GPIO_ABCD_IRQ);
+ else if (pending & BSP_GPIO_EFGH_IP)
+ do_IRQ(BSP_GPIO_EFGH_IRQ);
+
+ else if (pending & BSP_GPIO_ABCD_IP)
+ do_IRQ(BSP_GPIO_ABCD_IRQ);
+ #endif
+#endif
+ else {
+ REG32(BSP_GIMR) &= (~pending);
+#if defined(CONFIG_RTL_819XD)
+ REG32(BSP_GISR) = REG32(BSP_GISR);
+#endif
+ printk("Unknown Interrupt0:%x\n", pending);
+ #if defined(CONFIG_RTK_VOIP) || defined(CONFIG_RTL_819X)
+ spurious_interrupt(SPURIOS_INT_CASCADE);
+ #else
+ spurious_interrupt();
+ #endif
+ }
+}
+
+void bsp_irq_dispatch(void)
+{
+ volatile unsigned int pending;
+ pending = read_c0_cause() & read_c0_status();
+
+ if (pending & CAUSEF_IP2)
+ bsp_ictl_irq_dispatch();
+ else if (pending & CAUSEF_IP0)
+ do_IRQ(0);
+ else if (pending & CAUSEF_IP1)
+ do_IRQ(1);
+ else {
+#if defined(CONFIG_RTK_VOIP) || defined(CONFIG_RTL_819X)
+ spurious_interrupt(SPURIOS_INT_CPU);
+#else
+ spurious_interrupt();
+#endif
+ }
+}
+
+static void __init bsp_ictl_irq_init(unsigned int irq_base)
+{
+ int i;
+
+ for (i=0; i < BSP_IRQ_ICTL_NUM; i++)
+ set_irq_chip_and_handler(irq_base + i, &bsp_ictl_irq, handle_level_irq);
+
+ setup_irq(BSP_ICTL_IRQ, &irq_cascade);
+}
+
+#ifdef CONFIG_RTL_8198_NFBI_BOARD
+extern void (*flush_icache_range)(unsigned long start, unsigned long end);
+
+int get_dram_type(void)
+{
+ // read hw_strap register
+ if (REG32(0xb8000008) & 0x2) //bit 1
+ return 1; //DDR
+ else
+ return 0; //SDR
+}
+
+void setup_reboot_addr(unsigned long addr)
+{
+ unsigned int dramcode[20]={
+ 0x3c080f0a, // lui t0,0f0a
+ 0x3508dfff, // ori t0,t0,0xdfff
+ 0x3c09b800, // lui t1,0xb800
+ 0x35290048, // ori t1,t1,0x0048
+ 0xad280000, // sw t0,0(t1)
+
+ 0x3c0801FF, // lui t0,01FF
+ 0x3508FF8A, // ori t0,t0,0xFF8A
+ 0x3c09b800, // lui t1,0xb800
+ 0x35290010, // ori t1,t1,0x0010
+ 0xad280000, // sw t0,0(t1)
+
+ 0x3c086cea, // lui t0,0x6cea
+ 0x35080a80, // ori t0,t0,0x0a80
+ 0x3c09b800, // lui t1,0xb800
+ 0x35291008, // ori t1,t1,0x1008
+ 0xad280000, // sw t0,0(t1)
+
+ 0x3c085208, // lui t0,0x5208 //8MB DRAM
+ 0x35080000, // ori t0,t0,0x0000
+ 0x3c09b800, // lui t1,0xb800
+ 0x35291004, // ori t1,t1,0x1004
+ 0xad280000, // sw t0,0(t1)
+ };
+ unsigned int jmpcode[4]={
+ 0x3c1aa070, // lui k0,0xa070
+ 0x375a0000, // ori k0,k0,0x0000
+ 0x03400008, // jr k0
+ 0x0 // nop
+ };
+ int i, offset;
+
+ // setting DCR and DTR register
+ dramcode[10]=(dramcode[10] &0xffff0000) | 0xffff;
+ dramcode[11]=(dramcode[11] &0xffff0000) | 0x05c0;
+ //if (check_ddr_tmp_file())
+ if (get_dram_type()) { //DDR
+ dramcode[15]=(dramcode[15] &0xffff0000) | 0x5448; //DDR, 32M
+ //8198:1.set bigger current for DDR
+ dramcode[0]=(dramcode[0] &0xffff0000) | 0x0b0a;
+ // TX RX delay
+ dramcode[5]=(dramcode[5] &0xffff0000) | 0x01ff;
+ dramcode[6]=(dramcode[6] &0xffff0000) | 0xfc70;
+ }
+ else {
+ dramcode[15]=(dramcode[15] &0xffff0000) | 0x5208; //SDR, 8M
+ //8198:1.set bigger current for DDR
+ dramcode[0]=(dramcode[0] &0xffff0000) | 0x0f0a;
+ // TX RX delay
+ dramcode[5]=(dramcode[5] &0xffff0000) | 0x01ff;
+ dramcode[6]=(dramcode[6] &0xffff0000) | 0xff8a;
+ }
+ dramcode[16]=(dramcode[16] &0xffff0000) | 0x0000;
+
+ for (i=0, offset=0; i<20; i++, offset++)
+ *(volatile u32 *)(KSEG0 + 0x8000 + offset*4) = dramcode[i];
+
+ // set jump command
+ jmpcode[0] = (jmpcode[0]&0xffff0000) | ((addr>>16)&0xffff);
+ jmpcode[1] = (jmpcode[1]&0xffff0000) | (addr&0xffff);
+
+ for (i=0; i<4; i++, offset++)
+ *(volatile u32 *)(KSEG0 + 0x8000 + offset*4) = jmpcode[i];
+
+ flush_icache_range(KSEG0+0x8000, KSEG0 + offset*4);
+}
+#endif //CONFIG_RTL_8198_NFBI_BOARD
+
+
+void __init bsp_irq_init(void)
+{
+ //unsigned int status;
+ //volatile unsigned int status;
+ /* disable ict interrupt */
+ REG32(BSP_GIMR) = 0;
+
+ /* initialize IRQ action handlers */
+ rlx_cpu_irq_init(BSP_IRQ_CPU_BASE);
+ rlx_vec_irq_init(BSP_IRQ_LOPI_BASE);
+ bsp_ictl_irq_init(BSP_IRQ_ICTL_BASE);
+
+ /* Set IRR */
+ REG32(BSP_IRR0) = BSP_IRR0_SETTING;
+ REG32(BSP_IRR1) = BSP_IRR1_SETTING;
+ REG32(BSP_IRR2) = BSP_IRR2_SETTING;
+ REG32(BSP_IRR3) = BSP_IRR3_SETTING;
+
+ //status = read_c0_status();
+ //status = (status&(~ST0_IM))|(CAUSEF_IP2|CAUSEF_IP3|CAUSEF_IP4|CAUSEF_IP5|CAUSEF_IP6);
+ //write_c0_status(status);
+#ifdef CONFIG_USB
+ REG32(BSP_GIMR) |= BSP_USB_H_IE;
+#endif
+
+#ifdef CONFIG_DWC_OTG //wei add
+ REG32(BSP_GIMR) |= BSP_OTG_IE; //mac
+#endif
+}
+
+#if defined(CONFIG_ARCH_SUSPEND_POSSIBLE)//michaelxxx
+ #define CONFIG_RTL819X_SUSPEND_CHECK_INTERRUPT
+ #ifdef CONFIG_RTL819X_SUSPEND_CHECK_INTERRUPT
+ #include <linux/proc_fs.h>
+ #include <linux/kernel_stat.h>
+ #include <asm/uaccess.h>
+ //#define INT_HIGH_WATER_MARK 1850 //for window size = 1, based on LAN->WAN test result
+ //#define INT_LOW_WATER_MARK 1150
+ //#define INT_HIGH_WATER_MARK 9190 //for window size = 5, based on LAN->WAN test result
+ //#define INT_LOW_WATER_MARK 5500
+ #define INT_HIGH_WATER_MARK 3200 //for window size = 5, based on WLAN->WAN test result
+ #define INT_LOW_WATER_MARK 2200
+ #define INT_WINDOW_SIZE_MAX 10
+ static int suspend_check_enable = 1;
+ static int suspend_check_high_water_mark = INT_HIGH_WATER_MARK;
+ static int suspend_check_low_water_mark = INT_LOW_WATER_MARK;
+ static int suspend_check_win_size = 5;
+ static struct timer_list suspend_check_timer;
+ static int index=0, prev_count=0;
+ static int eth_int_count[INT_WINDOW_SIZE_MAX];
+ static int wlan_int_count[INT_WINDOW_SIZE_MAX];
+ int cpu_can_suspend = 1;
+ int cpu_can_suspend_check_init = 0;
+
+ static int read_proc_suspend_check(char *page, char **start, off_t off,
+ int count, int *eof, void *data)
+ {
+ int len;
+
+ len = sprintf(page, "enable=%d, winsize=%d(%d), high=%d, low=%d, suspend=%d, prev_count=%d\n",
+ suspend_check_enable, suspend_check_win_size, INT_WINDOW_SIZE_MAX,
+ suspend_check_high_water_mark, suspend_check_low_water_mark, cpu_can_suspend, prev_count);
+
+ if (len <= off+count)
+ *eof = 1;
+ *start = page + off;
+ len -= off;
+ if (len > count)
+ len = count;
+ if (len < 0)
+ len = 0;
+ return len;
+ }
+
+ static int write_proc_suspend_check(struct file *file, const char *buffer,
+ unsigned long count, void *data)
+ {
+ char tmp[128];
+
+ if (buffer && !copy_from_user(tmp, buffer, 128)) {
+ sscanf(tmp, "%d %d %d %d %d",
+ &suspend_check_enable, &suspend_check_win_size,
+ &suspend_check_high_water_mark, &suspend_check_low_water_mark, &cpu_can_suspend);
+ if (suspend_check_win_size >= INT_WINDOW_SIZE_MAX)
+ suspend_check_win_size = INT_WINDOW_SIZE_MAX - 1;
+ if (suspend_check_enable) {
+ mod_timer(&suspend_check_timer, jiffies + 100);
+ }
+ else {
+ del_timer(&suspend_check_timer);
+ }
+ }
+ return count;
+ }
+
+ static void suspend_check_timer_fn(unsigned long arg)
+ {
+ int count, j;
+
+ index++;
+ if (INT_WINDOW_SIZE_MAX <= index)
+ index = 0;
+ eth_int_count[index] = kstat_irqs(BSP_SWCORE_IRQ);
+ wlan_int_count[index] = kstat_irqs(BSP_PCIE_IRQ);
+ j = index - suspend_check_win_size;
+ if (j < 0)
+ j += INT_WINDOW_SIZE_MAX;
+ count = (eth_int_count[index] - eth_int_count[j]) +
+ (wlan_int_count[index]- wlan_int_count[j]); //unit: number of interrupt occurred
+
+ prev_count = count;
+
+ if (cpu_can_suspend) {
+ if (count > suspend_check_high_water_mark) {
+ cpu_can_suspend = 0;
+ //printk("\n<<<RTL8196C LEAVE SLEEP>>>\n"); /* for Debug Only*/
+ }
+ }
+ else {
+ if (count < suspend_check_low_water_mark) {
+ cpu_can_suspend = 1;
+ //printk("\n<<<RTL8196C ENTER SLEEP>>>\n"); /* for Debug Only*/
+ }
+ }
+#if 0 /* for Debug Only*/
+ printk("###index=%d, count=%d (%d+%d) suspend=%d###\n",index, count,
+ eth_int_count[index] - eth_int_count[j]),
+ (wlan_int_count[index]- wlan_int_count[j]),
+ cpu_can_suspend);
+#endif
+ mod_timer(&suspend_check_timer, jiffies + 100);
+ }
+
+ void suspend_check_interrupt_init(void)
+ {
+ struct proc_dir_entry *res;
+ int i;
+
+ res = create_proc_entry("suspend_check", 0, NULL);
+ if (res) {
+ res->read_proc = read_proc_suspend_check;
+ res->write_proc = write_proc_suspend_check;
+ }
+ else {
+ printk("unable to create /proc/suspend_check\n");
+ }
+
+ for (i=0; i<INT_WINDOW_SIZE_MAX; i++) {
+ wlan_int_count[i] = 0;
+ eth_int_count[i] = 0;
+ }
+ init_timer(&suspend_check_timer);
+ suspend_check_timer.data = 0;
+ suspend_check_timer.function = suspend_check_timer_fn;
+ suspend_check_timer.expires = jiffies + 100; /* in jiffies */
+ add_timer(&suspend_check_timer);
+ }
+#endif // CONFIG_RTL819X_SUSPEND_CHECK_INTERRUPT
+#endif //CONFIG_ARCH_SUSPEND_POSSIBLE
+
diff --git a/target/linux/realtek/files/arch/rlx/bsp/kgdb.c b/target/linux/realtek/files/arch/rlx/bsp/kgdb.c
new file mode 100644
index 000000000..93960b21f
--- /dev/null
+++ b/target/linux/realtek/files/arch/rlx/bsp/kgdb.c
@@ -0,0 +1,81 @@
+/*
+ * Realtek semiconductor Corp.
+ *
+ * arch/rlx/rlxocp/kgdb.c:
+ * Kernel debugging on the rtl5739.
+ *
+ * Tony Wu (tonywu@realtek.com.tw)
+ * Dec. 7, 2007
+ */
+#include <asm/system.h>
+#include <asm/tx3912.h>
+
+static int remoteDebugInitialized = 0;
+
+void debugInit(void)
+{
+/*
+ * If low-level debugging (before GDB or console operational) is
+ * configured, then we do not need to re-initialize the UART.
+ */
+#ifndef CONFIG_DEBUG_LL
+// earlyInitUartPR31700();
+#endif
+}
+
+char getDebugChar(void)
+{
+ char buf;
+ unsigned long int2, flags;
+
+ if (!remoteDebugInitialized) {
+ debugInit();
+ remoteDebugInitialized = 1;
+ }
+
+ save_and_cli(flags);
+
+ int2 = IntEnable2;
+
+ IntEnable2 = 0;
+
+ while (!(UartA_Ctrl1 & UART_RX_HOLD_FULL));
+
+ buf = UartA_Data;
+
+ IntEnable2 = int2;
+
+ restore_flags(flags);
+
+ return buf;
+}
+
+int putDebugChar(char c)
+{
+ int i;
+ unsigned long int2;
+
+ if (!remoteDebugInitialized) {
+ debugInit();
+ remoteDebugInitialized = 1;
+ }
+
+ int2 = IntEnable2;
+
+ IntEnable2 &=
+ ~(INT2_UARTATXINT | INT2_UARTATXOVERRUN | INT2_UARTAEMPTY);
+
+ for (i = 0; !(IntStatus2 & INT2_UARTATXINT) && (i < 10000); i++);
+
+ IntClear2 = INT2_UARTATXINT | INT2_UARTATXOVERRUN | INT2_UARTAEMPTY;
+
+ UartA_Data = c;
+
+ for (i = 0; !(IntStatus2 & INT2_UARTATXINT) && (i < 10000); i++);
+
+ IntClear2 = INT2_UARTATXINT | INT2_UARTATXOVERRUN | INT2_UARTAEMPTY;
+
+ IntEnable2 = int2;
+
+ return 1;
+}
diff --git a/target/linux/realtek/files/arch/rlx/bsp/pci.c b/target/linux/realtek/files/arch/rlx/bsp/pci.c
new file mode 100644
index 000000000..147f743cb
--- /dev/null
+++ b/target/linux/realtek/files/arch/rlx/bsp/pci.c
@@ -0,0 +1,1265 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * RTL819XX PCIE Host Controller Glue Driver
+ * Copyright (C) 2006, Realtek Semiconductor Corp.
+ * Author: (ghhuang@realtek.com.tw)
+ *
+ * Copyright (C) 2013, Artur Artamonov (artur@advem.lv)
+ *
+ * Notes:
+ * - Two host controllers available.
+ * - Each host direcly connects to one device
+ * - Supports PCI devices through PCIE-to-PCI bridges
+ * - If no PCI devices are connected to RC. Timeout monitor shall be
+ * enabled to prevent bus hanging.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+//#include <asm/rlxregs.h>
+#include "bspchip.h"
+
+#define PCI_8BIT_ACCESS 1
+#define PCI_16BIT_ACCESS 2
+#define PCI_32BIT_ACCESS 4
+#define PCI_ACCESS_READ 8
+#define PCI_ACCESS_WRITE 16
+
+#define MAX_NUM_DEV 4
+
+#define DEBUG_PRINTK 0
+
+#define CLK_MANAGE 0xb8000010
+#define SYS_PCIE_PHY0 (0xb8000000 +0x50)
+#define SYS_PCIE_PHY1 (0xb8000000 +0x54)
+#define PCIE_PHY0 0xb8b01008
+#define PCIE_PHY1 0xb8b21008
+//best define ever
+#define PIN_208 1
+
+#define MAX_PAYLOAD_SIZE_128B 0
+
+static int pci0_bus_number = 0xff;
+static int pci1_bus_number = 0xff;
+
+
+
+static struct resource rtl8196c_pci0_io_resource = {
+ .name = "RTL8196C PCI0 IO",
+ .flags = IORESOURCE_IO,
+ .start = PADDR(BSP_PCIE0_D_IO),
+ .end = PADDR(BSP_PCIE0_D_IO + 0x1FFFFF)
+};
+
+static struct resource rtl8196c_pci0_mem_resource = {
+ .name = "RTL8196C PCI0 MEM",
+ .flags = IORESOURCE_MEM,
+ .start = PADDR(BSP_PCIE0_D_MEM),
+ .end = PADDR(BSP_PCIE0_D_MEM + 0xFFFFFF)
+};
+
+static struct resource rtl8196d_pci0_io_resource = {
+ .name = "RTL8196D PCI0 IO",
+ .flags = IORESOURCE_IO,
+ .start = PADDR(BSP_PCIE0_D_IO),
+ .end = PADDR(BSP_PCIE0_D_IO + 0x1FFFFF)
+};
+
+static struct resource rtl8196d_pci0_mem_resource = {
+ .name = "RTL8196D PCI0 MEM",
+ .flags = IORESOURCE_MEM,
+ .start = PADDR(BSP_PCIE0_D_MEM),
+ .end = PADDR(BSP_PCIE0_D_MEM + 0xFFFFFF)
+};
+
+static struct resource rtl8196b_pci1_io_resource = {
+ .name = "RTL8196B PCI1 IO",
+ .flags = IORESOURCE_IO,
+ .start = PADDR(BSP_PCIE1_D_IO),
+ .end = PADDR(BSP_PCIE1_D_IO + 0x1FFFFF)
+};
+
+static struct resource rtl8196b_pci1_mem_resource = {
+ .name = "RTL8196B PCI1 MEM",
+ .flags = IORESOURCE_MEM,
+ .start = PADDR(BSP_PCIE1_D_MEM),
+ .end = PADDR(BSP_PCIE1_D_MEM + 0xFFFFFF)
+};
+
+
+#if defined(CONFIG_RTL_8196C)
+static struct resource rtl8196b_pci0_io_resource = resource rtl8196c_pci0_io_resource;
+static struct resource rtl8196b_pci0_mem_resource = resource rtl8196c_pci0_mem_resource;
+#elif defined(CONFIG_RTL_819XD)
+static struct resource rtl8196b_pci0_io_resource = resource rtl8196d_pci0_io_resource;
+static struct resource rtl8196b_pci0_mem_resource = resource rtl8196d_pci0_mem_resource;
+#endif
+
+//HOST PCIE
+#define PCIE0_RC_EXT_BASE (0xb8b01000)
+#define PCIE1_RC_EXT_BASE (0xb8b21000)
+
+//RC Extended register
+#define PCIE0_MDIO (PCIE0_RC_EXT_BASE+0x00)
+#define PCIE1_MDIO (PCIE1_RC_EXT_BASE+0x00)
+
+//MDIO
+#define PCIE_MDIO_DATA_OFFSET (16)
+#define PCIE_MDIO_DATA_MASK (0xffff <<PCIE_MDIO_DATA_OFFSET)
+#define PCIE_MDIO_REG_OFFSET (8)
+#define PCIE_MDIO_RDWR_OFFSET (0)
+
+int at2_mode=0;
+
+//------------------------------------------------------------------------
+unsigned int HostPCIe_SetPhyMdioRead(unsigned int portnum, unsigned int regaddr)
+{
+ unsigned int mdioaddr=PCIE0_MDIO;
+/*
+ if(portnum==0) mdioaddr=PCIE0_MDIO;
+ else if(portnum==1) mdioaddr=PCIE1_MDIO;
+ else return 0;
+*/
+ REG32(mdioaddr)= ((regaddr&0x1f)<<PCIE_MDIO_REG_OFFSET) | (0<<PCIE_MDIO_RDWR_OFFSET);
+ //delay
+ volatile int i;
+ for(i=0;i<5555;i++) ;
+
+ int val;
+ val=REG32(mdioaddr)& (0xffff <<PCIE_MDIO_DATA_OFFSET) ;
+ return ((val>>PCIE_MDIO_DATA_OFFSET)&0xffff);
+
+}
+
+
+void HostPCIe_SetPhyMdioWrite(unsigned int portnum, unsigned int regaddr, unsigned short val)
+{
+ unsigned int mdioaddr;
+
+ if(portnum==0) mdioaddr=PCIE0_MDIO;
+ else if(portnum==1) mdioaddr=PCIE1_MDIO;
+ else return 0;
+
+ REG32(mdioaddr)= ( (regaddr&0x1f)<<PCIE_MDIO_REG_OFFSET) | ((val&0xffff)<<PCIE_MDIO_DATA_OFFSET) | (1<<PCIE_MDIO_RDWR_OFFSET) ;
+ //delay
+ volatile int i;
+ for(i=0;i<5555;i++) ;
+}
+
+//----------------------------------------------------------------------------
+
+void PCIE_MDIO_Reset(unsigned int portnum)
+{
+ #define SYS_PCIE_PHY0 (0xb8000000 +0x50)
+ #define SYS_PCIE_PHY1 (0xb8000000 +0x54)
+ unsigned int sys_pcie_phy;
+
+ if (portnum==0)
+ sys_pcie_phy=SYS_PCIE_PHY0;
+ else if (portnum==1)
+ sys_pcie_phy=SYS_PCIE_PHY1;
+ else
+ return;
+
+ // 3.MDIO Reset
+ REG32(sys_pcie_phy) = (1<<3) |(0<<1) | (0<<0); //mdio reset=0,
+ REG32(sys_pcie_phy) = (1<<3) |(0<<1) | (1<<0); //mdio reset=1,
+ REG32(sys_pcie_phy) = (1<<3) |(1<<1) | (1<<0); //bit1 load_done=1
+}
+//------------------------------------------------------------------------
+void PCIE_PHY_Reset(unsigned int portnum)
+{
+ #define PCIE_PHY0 0xb8b01008
+ #define PCIE_PHY1 0xb8b21008
+ unsigned int pcie_phy;
+
+ if(portnum==0) pcie_phy=PCIE_PHY0;
+ else if(portnum==1) pcie_phy=PCIE_PHY1;
+ else return;
+
+ //4. PCIE PHY Reset
+ REG32(pcie_phy) = 0x01; //bit7:PHY reset=0 bit0: Enable LTSSM=1
+ REG32(pcie_phy) = 0x81; //bit7: PHY reset=1 bit0: Enable LTSSM=1
+
+}
+//------------------------------------------------------------------------
+int PCIE_Check_Link(unsigned int portnum)
+{
+ unsigned int dbgaddr;
+ unsigned int cfgaddr;
+
+ if(portnum==0) dbgaddr=0xb8b00728;
+ else if(portnum==1) dbgaddr=0xb8b20728;
+ else return;
+
+ //wait for LinkUP
+#ifdef CONFIG_RTK_VOIP
+ // accelerate when no pcie card
+ int i=3;
+#else
+ int i=20;
+#endif
+ while(--i)
+ {
+ if( (REG32(dbgaddr)&0x1f)==0x11)
+ break;
+ mdelay(300);
+
+ }
+ if(i==0)
+ {
+ printk("i=%x Cannot LinkUP \n",i);
+ return 0;
+ }
+ else
+ {
+ printk("\nLink-UP OK\n");
+ if(portnum==0)
+ cfgaddr=0xb8b10000;
+ else if(portnum==1)
+ cfgaddr=0xb8b30000;
+
+
+ REG32(cfgaddr+0x04)=0x00100007;
+
+ printk("Find Port=%x Device:Vender ID=%x\n", portnum, REG32(cfgaddr) );
+ REG32(cfgaddr);
+ mdelay(1);
+
+ #if defined(CONFIG_RTL_819XD)
+ if (portnum == 0)
+ REG32(BSP_GIMR) |= BSP_PCIE_IE;
+ else
+ REG32(BSP_GIMR) |= BSP_PCIE2_IE;
+ #endif
+ }
+ return 1;
+}
+//------------------------------------------------------------------------
+/*
+void PCIE_Device_PERST(void)
+{
+ REG32(CLK_MANAGE) &= ~(1<<12); //perst=0 off.
+ mdelay(500); //PCIE standadrd: poweron: 100us, after poweron: 100ms
+ mdelay(500);
+ REG32(CLK_MANAGE) |= (1<<12); //PERST=1
+ mdelay(500);
+}
+*/
+
+static void PCIE_Device_PERST(int portnum)
+{
+ #define CLK_MANAGE 0xb8000010
+ #define GPIO_BASE 0xB8003500
+ #define PEFGHCNR_REG (0x01C + GPIO_BASE) /* Port EFGH control */
+ #define PEFGHPTYPE_REG (0x020 + GPIO_BASE) /* Port EFGH type */
+ #define PEFGHDIR_REG (0x024 + GPIO_BASE) /* Port EFGH direction */
+ #define PEFGHDAT_REG (0x028 + GPIO_BASE) /* Port EFGH data */
+ if (portnum==0)
+ {
+ REG32(CLK_MANAGE) &= ~(1<<26); //perst=0 off.
+ mdelay(500); //PCIE standadrd: poweron: 100us, after poweron: 100ms
+ mdelay(500);
+ REG32(CLK_MANAGE) |= (1<<26); //PERST=1
+ }
+ else if (portnum==1)
+ {
+ /* PCIE Device Reset
+ * The pcei1 slot reset register depends on the hw
+ */
+#if 1//defined(CONFIG_RTL_DUAL_PCIESLOT_BIWLAN) || (RTL_USED_PCIE_SLOT==1) || defined(CONFIG_RTL_DUAL_PCIESLOT_BIWLAN_D)
+ REG32(PEFGHDAT_REG) &= ~(0x1000); //perst=0 off.
+ mdelay(300); //PCIE standadrd: poweron: 100us, after poweron: 100ms
+ mdelay(300);
+ REG32(PEFGHDAT_REG) |= (0x1000); //PERST=1
+#elif defined(CONFIG_RTL_92D_SUPPORT)
+ REG32(CLK_MANAGE) &= ~(1<<26); //perst=0 off.
+ mdelay(500); //PCIE standadrd: poweron: 100us, after poweron: 100ms
+ mdelay(500);
+ REG32(CLK_MANAGE) |= (1<<26); //PERST=1
+#endif
+ }
+ else
+ return;
+}
+
+//------------------------------------------------------------------------
+
+int OnlyOneReset()
+{
+
+ int result=0;
+ int portnum=0;
+ printk("PCIE RESET Only Once\n");
+
+
+ #define CLK_MANAGE 0xb8000010
+#ifdef CONFIG_RTL_819XD
+ REG32(CLK_MANAGE)|= (1<<12)|(1<<13)|(1<<19)|(1<<20)|(1<<18)|(1<<16);
+#endif
+ REG32(CLK_MANAGE) &= (~(1<<14)); //disable active_pcie0
+ REG32(CLK_MANAGE) |= (1<<14); //enable active_pcie0
+
+ #define PAD_CONTROL 0xb8000048
+ REG32(PAD_CONTROL)|=(1<<27); //switch to rc
+ REG32(CLK_MANAGE) &= (~(1<<16)); //disable active_pcie1
+ REG32(CLK_MANAGE) |= (1<<16); //enable active_pcie1
+
+ //PERST=1
+ //REG32(CLK_MANAGE) |= (1<<26);
+ //PCIE_Device_PERST(0);
+
+
+
+ for(portnum=0; portnum<2; portnum++)
+ PCIE_MDIO_Reset(portnum);
+ mdelay(500);
+
+ for(portnum=0; portnum<2; portnum++)
+ {
+ #if 1//def RTL8198_FORMALCHIP_A
+ HostPCIe_SetPhyMdioWrite(portnum, 0, 0xD087); //bokai tell, and fix
+
+ HostPCIe_SetPhyMdioWrite(portnum, 1, 0x0003);
+ HostPCIe_SetPhyMdioWrite(portnum, 2, 0x4d18);
+ #ifdef CONFIG_PHY_EAT_40MHZ
+ HostPCIe_SetPhyMdioWrite(portnum, 5, 0x0BCB); //40M
+ #endif
+
+ #ifdef CONFIG_PHY_EAT_40MHZ
+ HostPCIe_SetPhyMdioWrite(portnum, 6, 0xF148); //40M
+ #else
+ HostPCIe_SetPhyMdioWrite(portnum, 6, 0xf848); //25M
+ #endif
+
+ HostPCIe_SetPhyMdioWrite(portnum, 7, 0x31ff);
+
+ #ifdef CONFIG_RTL_819XD
+ HostPCIe_SetPhyMdioWrite(portnum, 8, 0x18d6); //peisi tune
+ #else
+ HostPCIe_SetPhyMdioWrite(portnum, 8, 0x18d7); //peisi tune
+ #endif
+ HostPCIe_SetPhyMdioWrite(portnum, 0x09, 0x539c);
+ HostPCIe_SetPhyMdioWrite(portnum, 0x0a, 0x20eb);
+ HostPCIe_SetPhyMdioWrite(portnum, 0x0d, 0x1766);
+ //HostPCIe_SetPhyMdioWrite(portnum, 0x0d, 0x1464); //wei add
+
+ HostPCIe_SetPhyMdioWrite(portnum, 0x0b, 0x0511); //for sloving low performance
+
+
+ HostPCIe_SetPhyMdioWrite(portnum, 0xf, 0x0a00);
+ HostPCIe_SetPhyMdioWrite(portnum, 0x19, 0xFCE0);
+
+ HostPCIe_SetPhyMdioWrite(portnum, 0x1a, 0x7e40); //formal chip, reg 0x1a.4=0
+ HostPCIe_SetPhyMdioWrite(portnum, 0x1b, 0xFC01); //formal chip reg 0x1b.0=1
+
+ HostPCIe_SetPhyMdioWrite(portnum, 0x1e, 0xC280);
+
+ #endif
+ }
+
+ PCIE_Device_PERST(0);
+ mdelay(500);
+ for(portnum=0; portnum<2; portnum++)
+ PCIE_PHY_Reset(portnum);
+
+ mdelay(500);
+ mdelay(500);
+ mdelay(500);
+
+
+ for(portnum=0; portnum<2; portnum++)
+ { result=PCIE_Check_Link(portnum);
+ if(result!=1)
+ continue;
+
+
+ #if 1 //wei add patch
+
+ //add compatible, slove sata pcie card.
+ if(portnum==0) REG32(0xb8b0100c)=(1<<3); //set target Device Num=1;
+ if(portnum==1) REG32(0xb8b2100c)=(2<<3); //set target Device Num=1;
+
+ unsigned int rc_cfg, cfgaddr;
+ unsigned int iomapaddr;
+ unsigned int memmapaddr;
+
+#define PCIE0_RC_CFG_BASE (0xb8b00000)
+#define PCIE0_RC_EXT_BASE (PCIE0_RC_CFG_BASE + 0x1000)
+#define PCIE0_EP_CFG_BASE (0xb8b10000)
+
+#define PCIE1_RC_CFG_BASE (0xb8b20000)
+#define PCIE1_RC_EXT_BASE (PCIE1_RC_CFG_BASE + 0x1000)
+#define PCIE1_EP_CFG_BASE (0xb8b30000)
+
+
+#define PCIE0_MAP_IO_BASE (0xb8c00000)
+#define PCIE0_MAP_MEM_BASE (0xb9000000)
+
+#define PCIE1_MAP_IO_BASE (0xb8e00000)
+#define PCIE1_MAP_MEM_BASE (0xba000000)
+
+#define MAX_READ_REQSIZE_128B 0x00
+#define MAX_READ_REQSIZE_256B 0x10
+#define MAX_READ_REQSIZE_512B 0x20
+#define MAX_READ_REQSIZE_1KB 0x30
+#define MAX_READ_REQSIZE_2KB 0x40
+#define MAX_READ_REQSIZE_4KB 0x50
+
+#define MAX_PAYLOAD_SIZE_128B 0x00
+#define MAX_PAYLOAD_SIZE_256B 0x20
+#define MAX_PAYLOAD_SIZE_512B 0x40
+#define MAX_PAYLOAD_SIZE_1KB 0x60
+#define MAX_PAYLOAD_SIZE_2KB 0x80
+#define MAX_PAYLOAD_SIZE_4KB 0xA0
+
+ if(portnum==0)
+ { rc_cfg=PCIE0_RC_CFG_BASE;
+ cfgaddr=PCIE0_EP_CFG_BASE;
+ iomapaddr=PCIE0_MAP_IO_BASE;
+ memmapaddr=PCIE0_MAP_MEM_BASE;
+ }
+ else if(portnum==1)
+ { rc_cfg=PCIE1_RC_CFG_BASE;
+ cfgaddr=PCIE1_EP_CFG_BASE;
+ iomapaddr=PCIE1_MAP_IO_BASE;
+ memmapaddr=PCIE1_MAP_MEM_BASE;
+ }
+ //STATUS
+ //bit 4: capabilties List
+
+ //CMD
+ //bit 2: Enable Bys master,
+ //bit 1: enable memmap,
+ //bit 0: enable iomap
+ REG32(rc_cfg + 0x04)= 0x00100007;
+
+ //Device Control Register
+ //bit [7-5] payload size
+ REG32(rc_cfg + 0x78)= (REG32(rc_cfg + 0x78 ) & (~0xE0)) | MAX_PAYLOAD_SIZE_128B; // Set MAX_PAYLOAD_SIZE to 128B,default
+ REG32(cfgaddr + 0x04)= 0x00100007; //0x00180007
+
+ //bit 0: 0:memory, 1 io indicate
+ //REG32(cfgaddr + 0x10)= (iomapaddr | 0x00000001) & 0x1FFFFFFF; // Set BAR0
+
+ //bit 3: prefetch
+ //bit [2:1] 00:32bit, 01:reserved, 10:64bit 11:reserved
+ //REG32(cfgaddr + 0x18)= (memmapaddr | 0x00000004) & 0x1FFFFFFF; // Set BAR1
+
+ //offset 0x78 [7:5]
+ REG32(cfgaddr + 0x78) = (REG32(cfgaddr + 0x78) & (~0xE0)) | (MAX_PAYLOAD_SIZE_128B); // Set MAX_PAYLOAD_SIZE to 128B
+
+ //offset 0x79: [6:4]
+ REG32(cfgaddr + 0x78) = (REG32(cfgaddr + 0x78) & (~0x7000)) | (MAX_READ_REQSIZE_256B<<8); // Set MAX_REQ_SIZE to 256B,default
+
+ //io and mem limit, setting to no litmit
+ REG32(rc_cfg+ 0x1c) = (2<<4) | (0<<12); // [7:4]=base [15:12]=limit
+ REG32(rc_cfg+ 0x20) = (2<<4) | (0<<20); // [15:4]=base [31:20]=limit
+ REG32(rc_cfg+ 0x24) = (2<<4) | (0<<20); // [15:4]=base [31:20]=limit
+#endif
+ }
+
+ return 1;
+
+}
+
+//----------------------------------------------------------------------
+//======================================================================
+//please rewrite me/ here is a lot of ...
+#if defined(CONFIG_RTL_8196C)
+int PCIE_reset_procedure(int portnum, int Use_External_PCIE_CLK, int mdio_reset)
+{
+ #define CLK_MANAGE 0xb8000010
+ int result;
+
+ REG32(CLK_MANAGE) |= (1<<11); //enable active_pcie0
+
+ mdelay(10);
+ REG32(0xb8b0100c)=(1<<3); //set target Device Num=1;
+ mdelay(10);
+
+ if (mdio_reset) {
+ printk("Do MDIO_RESET\n");
+ // 3.MDIO Reset
+ PCIE_MDIO_Reset(portnum);
+ mdelay(10);
+ }
+ //4. PCIE PHY Reset
+ PCIE_PHY_Reset(portnum);
+ mdelay(10);
+ mdelay(10);
+
+ //----------------------------------------
+ if (mdio_reset) {
+ HostPCIe_SetPhyMdioWrite(portnum, 0, 0xD087); //bokai tell, and fix
+
+ HostPCIe_SetPhyMdioWrite(portnum, 1, 0x0003);
+ HostPCIe_SetPhyMdioWrite(portnum, 2, 0x4d18);
+#ifdef CONFIG_PHY_EAT_40MHZ
+#ifdef CONFIG_HIGH_POWER_EXT_PA
+ HostPCIe_SetPhyMdioWrite(portnum, 5, 0x0BF3); //40M
+#else
+ HostPCIe_SetPhyMdioWrite(portnum, 5, 0x0BCB); //40M
+#endif
+#endif
+
+#ifdef CONFIG_PHY_EAT_40MHZ
+ HostPCIe_SetPhyMdioWrite(portnum, 6, 0xF148); //40M
+#else
+ HostPCIe_SetPhyMdioWrite(portnum, 6, 0xf848); //25M
+#endif
+
+ HostPCIe_SetPhyMdioWrite(portnum, 7, 0x31ff);
+ HostPCIe_SetPhyMdioWrite(portnum, 8, 0x18d7); //peisi tune
+
+#if 0 //old,
+ HostPCIe_SetPhyMdioWrite(portnum, 9, 0x531c);
+ HostPCIe_SetPhyMdioWrite(portnum, 0xd, 0x1766); //peisi tune
+#else //saving more power, 8196c pe-si tune
+ HostPCIe_SetPhyMdioWrite(portnum, 0x09, 0x539c);
+ HostPCIe_SetPhyMdioWrite(portnum, 0x0a, 0x20eb);
+ HostPCIe_SetPhyMdioWrite(portnum, 0x0d, 0x1764);
+#endif
+ HostPCIe_SetPhyMdioWrite(portnum, 0x0b, 0x0511); //for sloving low performance
+
+ HostPCIe_SetPhyMdioWrite(portnum, 0xf, 0x0a00);
+ HostPCIe_SetPhyMdioWrite(portnum, 0x19, 0xFCE0);
+
+ HostPCIe_SetPhyMdioWrite(portnum, 0x1e, 0xC280);
+ }
+
+ //---------------------------------------
+ PCIE_Device_PERST();
+
+ PCIE_PHY_Reset(portnum);
+ mdelay(500);
+ REG32(0xb8b00000 + 0x04)= 0x00100007;
+ REG8(0xb8b00000 + 0x78)=((REG8(0xb8b00000 + 0x78) & (~0xE0)) | MAX_PAYLOAD_SIZE_128B);
+ mdelay(500);
+ result=PCIE_Check_Link(portnum);
+ return result;
+}
+#elif defined(CONFIG_RTL_819XD)
+int PCIE_reset_procedure(int portnum, int Use_External_PCIE_CLK, int mdio_reset)
+{
+ // dprintf("port=%x, mdio_rst=%x \n", portnum, mdio_reset);
+ int result=0;
+
+ //first, Turn On PCIE IP
+ #define CLK_MANAGE 0xb8000010
+ if(portnum==0) REG32(CLK_MANAGE) |= (1<<14); //enable active_pcie0
+ else if(portnum==1) REG32(CLK_MANAGE) |= (1<<16); //enable active_pcie1
+ else return result;
+ if (portnum==0)
+ {
+ REG32(CLK_MANAGE) |= (1<<26); //PERST=1
+ }
+ else if (portnum==1)
+ {
+ REG32(0xb8000040)|=0x300;
+ REG32(PEFGHCNR_REG) &= ~(0x1000); /*port F bit 4 */
+ REG32(PEFGHDIR_REG) |= (0x1000); /*port F bit 4 */
+ REG32(PEFGHDAT_REG) |= (0x1000); //PERST=1
+ }
+#ifdef CONFIG_RTL_819XD
+ REG32(CLK_MANAGE) |= (1<<12)| (1<<13)|(1<<18);
+#endif
+ mdelay(500);
+ #ifdef CONFIG_RTL8198_REVISION_B
+ if(portnum==1)
+ {
+ #define PAD_CONTROL 0xb8000048
+ REG32(PAD_CONTROL)|=(1<<27);
+ }
+ #endif
+
+
+ if(mdio_reset)
+ {
+ if(at2_mode==0) //no auto test, show message
+ printk("Do MDIO_RESET\n");
+ mdelay(1);
+ // 3.MDIO Reset
+ PCIE_MDIO_Reset(portnum);
+ }
+/*
+ PCIE_PHY_Reset(portnum);
+ */
+ mdelay(500);
+ mdelay(500);
+
+ //----------------------------------------
+ if(mdio_reset)
+ {
+ //fix 8198 test chip pcie tx problem.
+#if defined(CONFIG_RTL8198_REVISION_B) || defined(CONFIG_RTL_819XD)
+ if ((REG32(BSP_REVR) >= BSP_RTL8198_REVISION_B) || ((REG32(BSP_REVR)&0xfffff000) == BSP_RTL8197D))
+ {
+ #if 1//def RTL8198_FORMALCHIP_A
+ HostPCIe_SetPhyMdioWrite(portnum, 0, 0xD087); //bokai tell, and fix
+
+ HostPCIe_SetPhyMdioWrite(portnum, 1, 0x0003);
+ HostPCIe_SetPhyMdioWrite(portnum, 2, 0x4d18);
+ #ifdef CONFIG_PHY_EAT_40MHZ
+ HostPCIe_SetPhyMdioWrite(portnum, 5, 0x0BCB); //40M
+ #endif
+
+ #ifdef CONFIG_PHY_EAT_40MHZ
+ HostPCIe_SetPhyMdioWrite(portnum, 6, 0xF148); //40M
+ #else
+ HostPCIe_SetPhyMdioWrite(portnum, 6, 0xf848); //25M
+ #endif
+
+ HostPCIe_SetPhyMdioWrite(portnum, 7, 0x31ff);
+ HostPCIe_SetPhyMdioWrite(portnum, 8, 0x18d5); //peisi tune
+
+ #if 0 //old,
+ HostPCIe_SetPhyMdioWrite(portnum, 9, 0x531c);
+ HostPCIe_SetPhyMdioWrite(portnum, 0xd, 0x1766); //peisi tune
+ #else //saving more power, 8196c pe-si tune
+ HostPCIe_SetPhyMdioWrite(portnum, 0x09, 0x539c);
+ HostPCIe_SetPhyMdioWrite(portnum, 0x0a, 0x20eb);
+ HostPCIe_SetPhyMdioWrite(portnum, 0x0d, 0x1766);
+ #endif
+#ifdef CONFIG_RTL_819XD
+ HostPCIe_SetPhyMdioWrite(portnum, 0x0b, 0x0711); //for sloving low performance
+#else
+ HostPCIe_SetPhyMdioWrite(portnum, 0x0b, 0x0511); //for sloving low performance
+#endif
+
+ HostPCIe_SetPhyMdioWrite(portnum, 0xf, 0x0a00);
+ HostPCIe_SetPhyMdioWrite(portnum, 0x19, 0xFCE0);
+
+ HostPCIe_SetPhyMdioWrite(portnum, 0x1a, 0x7e4f); //formal chip, reg 0x1a.4=0
+ HostPCIe_SetPhyMdioWrite(portnum, 0x1b, 0xFC01); //formal chip reg 0x1b.0=1
+
+ HostPCIe_SetPhyMdioWrite(portnum, 0x1e, 0xC280);
+
+ #endif
+
+ }
+ else
+#endif
+ {
+//#define PHY_USE_TEST_CHIP 1 // 1: test chip, 0: fib chip
+//#define PHY_EAT_40MHZ 0 // 0: 25MHz, 1: 40MHz
+
+ //HostPCIe_SetPhyMdioWrite(portnum, 0, 0xD187);//ori
+ HostPCIe_SetPhyMdioWrite(portnum, 0, 0xD087);
+
+ HostPCIe_SetPhyMdioWrite(portnum, 1, 0x0003);
+ //HostPCIe_SetPhyMdioWrite(portnum, 2, 0x4d18);
+ HostPCIe_SetPhyMdioWrite(portnum, 6, 0xf448); //new
+ HostPCIe_SetPhyMdioWrite(portnum, 6, 0x408); //avoid noise infuse //15-12=0, 7-5=0, 0448
+
+ HostPCIe_SetPhyMdioWrite(portnum, 7, 0x31ff);
+ HostPCIe_SetPhyMdioWrite(portnum, 8, 0x18d5); //new
+ HostPCIe_SetPhyMdioWrite(portnum, 9, 0x531c);
+
+ //HostPCIe_SetPhyMdioWrite(portnum, 0xa, 0x00C9);
+ //HostPCIe_SetPhyMdioWrite(portnum, 0xb, 0xe511);
+ //HostPCIe_SetPhyMdioWrite(portnum, 0xc, 0x0820);
+ HostPCIe_SetPhyMdioWrite(portnum, 0xd, 0x1766);
+ HostPCIe_SetPhyMdioWrite(portnum, 0xf, 0x0010);//ori
+ // HostPCIe_SetPhyMdioWrite(portnum, 0xf, 0x0a00);
+
+ HostPCIe_SetPhyMdioWrite(portnum, 0x19, 0xFCE0);
+ HostPCIe_SetPhyMdioWrite(portnum, 0x1e, 0xC280);
+
+
+
+#if 0 //saving more power
+ HostPCIe_SetPhyMdioWrite(0xa, 0xeb);
+ HostPCIe_SetPhyMdioWrite(0x9, 0x538c);
+
+// HostPCIe_SetPhyMdioWrite(0xc, 0xC828); //original
+// HostPCIe_SetPhyMdioWrite(0x0, 0x502F); //fix
+
+ HostPCIe_SetPhyMdioWrite(0xc, 0x8828); //new
+ HostPCIe_SetPhyMdioWrite(0x0, 0x502F); //fix
+#endif
+ }
+ }
+
+ //---------------------------------------
+ PCIE_Device_PERST(portnum);
+
+ PCIE_PHY_Reset(portnum);
+ mdelay(500);
+ mdelay(500);
+ result=PCIE_Check_Link(portnum);
+ #if 0
+ if(portnum==0)
+ {
+ if(result)
+ {
+ WRITE_MEM32(BSP_PCIE0_H_PWRCR, READ_MEM32(BSP_PCIE0_H_PWRCR) & 0xFFFFFF7F);
+ mdelay(100);
+ WRITE_MEM32(BSP_PCIE0_H_PWRCR, READ_MEM32(BSP_PCIE0_H_PWRCR) | 0x00000080);
+ }
+ }
+ else
+ {
+ #ifdef PIN_208
+ if(result)
+ {
+ WRITE_MEM32(BSP_PCIE1_H_PWRCR, READ_MEM32(BSP_PCIE1_H_PWRCR) & 0xFFFFFF7F);
+ mdelay(100);
+ WRITE_MEM32(BSP_PCIE1_H_PWRCR, READ_MEM32(BSP_PCIE1_H_PWRCR) | 0x00000080);
+ }
+ #endif
+ }
+ #endif
+ return result;
+#endif
+
+//========================================================================================
+
+static int rtl8196b_pci_reset(void)
+{
+ /* If PCI needs to be reset, put code here.
+ * Note:
+ * Software may need to do hot reset for a period of time, say ~100us.
+ * Here we put 2ms.
+ */
+#if 1
+//Modified for PCIE PHY parameter due to RD center suggestion by Jason 12252009
+WRITE_MEM32(0xb8000044, 0x9);//Enable PCIE PLL
+mdelay(10);
+//WRITE_MEM32(0xb8000010, 0x00FFFFD6);//Active LX & PCIE Clock in 8196B system register
+WRITE_MEM32(0xb8000010, READ_MEM32(0xb8000010)|(1<<8)|(1<<9)|(1<<10));
+#ifdef PIN_208
+WRITE_MEM32(0xb8000010, READ_MEM32(0xb8000010)|(1<<12));
+#endif
+mdelay(10);
+WRITE_MEM32(0xb800003C, 0x1);//PORT0 PCIE PHY MDIO Reset
+mdelay(10);
+WRITE_MEM32(0xb800003C, 0x3);//PORT0 PCIE PHY MDIO Reset
+mdelay(10);
+#ifdef PIN_208
+WRITE_MEM32(0xb8000040, 0x1);//PORT1 PCIE PHY MDIO Reset
+mdelay(10);
+WRITE_MEM32(0xb8000040, 0x3);//PORT1 PCIE PHY MDIO Reset
+mdelay(10);
+#endif
+WRITE_MEM32(0xb8b01008, 0x1);// PCIE PHY Reset Close:Port 0
+mdelay(10);
+WRITE_MEM32(0xb8b01008, 0x81);// PCIE PHY Reset On:Port 0
+mdelay(10);
+#ifdef PIN_208
+WRITE_MEM32(0xb8b21008, 0x1);// PCIE PHY Reset Close:Port 1
+mdelay(10);
+WRITE_MEM32(0xb8b21008, 0x81);// PCIE PHY Reset On:Port 1
+mdelay(10);
+#endif
+#ifdef OUT_CYSTALL
+WRITE_MEM32(0xb8b01000, 0xcc011901);// PCIE PHY Reset On:Port 0
+mdelay(10);
+#ifdef PIN_208
+WRITE_MEM32(0xb8b21000, 0xcc011901);// PCIE PHY Reset On:Port 1
+mdelay(10);
+#endif
+#endif
+//WRITE_MEM32(0xb8000010, 0x01FFFFD6);// PCIE PHY Reset On:Port 1
+WRITE_MEM32(0xb8000010, READ_MEM32(0xb8000010)|(1<<24));
+mdelay(10);
+#endif
+ WRITE_MEM32(BSP_PCIE0_H_PWRCR, READ_MEM32(BSP_PCIE0_H_PWRCR) & 0xFFFFFF7F);
+#ifdef PIN_208
+ WRITE_MEM32(BSP_PCIE1_H_PWRCR, READ_MEM32(BSP_PCIE1_H_PWRCR) & 0xFFFFFF7F);
+#endif
+ mdelay(100);
+ WRITE_MEM32(BSP_PCIE0_H_PWRCR, READ_MEM32(BSP_PCIE0_H_PWRCR) | 0x00000080);
+#ifdef PIN_208
+ WRITE_MEM32(BSP_PCIE1_H_PWRCR, READ_MEM32(BSP_PCIE1_H_PWRCR) | 0x00000080);
+#endif
+ return 0;
+}
+
+//========================================================================================
+
+static int rtl8196b_pcibios_config_access(unsigned char access_type,
+ unsigned int addr, unsigned int *data)
+{
+ /* Do 8bit/16bit/32bit access */
+ if (access_type & PCI_ACCESS_WRITE)
+ {
+ if (access_type & PCI_8BIT_ACCESS)
+ WRITE_MEM8(addr, *data);
+ else if (access_type & PCI_16BIT_ACCESS)
+ WRITE_MEM16(addr, *data);
+ else
+ WRITE_MEM32(addr, *data);
+ }
+ else if (access_type & PCI_ACCESS_READ)
+ {
+ if (access_type & PCI_8BIT_ACCESS)
+ {
+ #ifdef CONFIG_RTL8198_REVISION_B
+ unsigned int data_temp=0; int swap[4]={0,8,16,24}; int diff = addr&0x3;
+ data_temp=READ_MEM32(addr);
+ *data=(unsigned int)(( data_temp>>swap[diff])&0xff);
+ #else
+ *data = READ_MEM8(addr);
+ #endif
+ }
+ else if (access_type & PCI_16BIT_ACCESS)
+ {
+ #ifdef CONFIG_RTL8198_REVISION_B
+ unsigned int data_temp=0; int swap[4]={0,8,16,24}; int diff = addr&0x3;
+ data_temp=READ_MEM32(addr);
+ *data=(unsigned int)(( data_temp>>swap[diff])&0xffff);
+ #else
+ *data = READ_MEM16(addr);
+ #endif
+ }
+ else
+ *data = READ_MEM32(addr);
+ }
+
+ /* If need to check for PCIE access timeout, put code here */
+ /* ... */
+
+ return 0;
+}
+
+
+//========================================================================================
+/*
+ * RTL8196b supports config word read access for 8/16/32 bit
+ *
+ * FIXME: currently only utilize 32bit access
+ */
+static int rtl8196b_pcibios0_read(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, unsigned int *val)
+{
+ unsigned int data = 0;
+ unsigned int addr = 0;
+
+ if (pci0_bus_number == 0xff)
+ pci0_bus_number = bus->number;
+ #if DEBUG_PRINTK
+ //printk("File: %s, Function: %s, Line: %d\n", __FILE__, __FUNCTION__, __LINE__);
+ //printk("Bus: %d, Slot: %d, Func: %d, Where: %d, Size: %d\n", bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn), where, size);
+ #endif
+
+ if (bus->number == pci0_bus_number)
+ {
+ /* PCIE host controller */
+ if (PCI_SLOT(devfn) == 0)
+ {
+ addr = BSP_PCIE0_H_CFG + where;
+
+ if (rtl8196b_pcibios_config_access(PCI_ACCESS_READ | PCI_32BIT_ACCESS, addr & ~(0x3), &data))
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ if (size == 1)
+ *val = (data >> ((where & 3) << 3)) & 0xff;
+ else if (size == 2)
+ *val = (data >> ((where & 3) << 3)) & 0xffff;
+ else
+ *val = data;
+ }
+ else
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ }
+ else if (bus->number == (pci0_bus_number + 1))
+ {
+ /* PCIE devices directly connected */
+ if (PCI_SLOT(devfn) == 0)
+ {
+ addr = BSP_PCIE0_D_CFG0 + (PCI_FUNC(devfn) << 12) + where;
+
+ if (rtl8196b_pcibios_config_access(PCI_ACCESS_READ | size, addr, val))
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ }
+ else
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ }
+ else
+ {
+ /* Devices connected through bridge */
+ if (PCI_SLOT(devfn) < MAX_NUM_DEV)
+ {
+ WRITE_MEM32(BSP_PCIE0_H_IPCFG, ((bus->number) << 8) | (PCI_SLOT(devfn) << 3) | PCI_FUNC(devfn));
+ addr = BSP_PCIE0_D_CFG1 + where;
+
+ if (rtl8196b_pcibios_config_access(PCI_ACCESS_READ | size, addr, val))
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ }
+ else
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ }
+#if defined(CONFIG_RTL_819XD)
+ REG32(0xb8000014)=0x800200;
+#endif
+ #if DEBUG_PRINTK
+ //printk("File: %s, Function: %s, Line: %d\n", __FILE__, __FUNCTION__, __LINE__);
+ //printk("Read Value: 0x%08X\n", *val);
+ #endif
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+//========================================================================================
+static int rtl8196b_pcibios0_write(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, unsigned int val)
+{
+ unsigned int data = 0;
+ unsigned int addr = 0;
+
+ static int pci0_bus_number = 0xff;
+ if (pci0_bus_number == 0xff)
+ pci0_bus_number = bus->number;
+
+ #if DEBUG_PRINTK
+ //printk("File: %s, Function: %s, Line: %d\n", __FILE__, __FUNCTION__, __LINE__);
+ //printk("Bus: %d, Slot: %d, Func: %d, Where: %d, Size: %d\n", bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn), where, size);
+ #endif
+
+ if (bus->number == pci0_bus_number)
+ {
+ /* PCIE host controller */
+ if (PCI_SLOT(devfn) == 0)
+ {
+ addr = BSP_PCIE0_H_CFG + where;
+
+ if (rtl8196b_pcibios_config_access(PCI_ACCESS_READ | PCI_32BIT_ACCESS, addr & ~(0x3), &data))
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ if (size == 1)
+ data = (data & ~(0xff << ((where & 3) << 3))) | (val << ((where & 3) << 3));
+ else if (size == 2)
+ data = (data & ~(0xffff << ((where & 3) << 3))) | (val << ((where & 3) << 3));
+ else
+ data = val;
+
+ if (rtl8196b_pcibios_config_access(PCI_ACCESS_WRITE | PCI_32BIT_ACCESS, addr & ~(0x3), &data))
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ }
+ else
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ }
+ else if (bus->number == (pci0_bus_number + 1))
+ {
+ /* PCIE devices directly connected */
+ if (PCI_SLOT(devfn) == 0)
+ {
+ addr = BSP_PCIE0_D_CFG0 + (PCI_FUNC(devfn) << 12) + where;
+
+ if (rtl8196b_pcibios_config_access(PCI_ACCESS_WRITE | size, addr, &val))
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ }
+ else
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ }
+ else
+ {
+ /* Devices connected through bridge */
+ if (PCI_SLOT(devfn) < MAX_NUM_DEV)
+ {
+ WRITE_MEM32(BSP_PCIE0_H_IPCFG, ((bus->number) << 8) | (PCI_SLOT(devfn) << 3) | PCI_FUNC(devfn));
+ addr = BSP_PCIE0_D_CFG1 + where;
+
+ if (rtl8196b_pcibios_config_access(PCI_ACCESS_WRITE | size, addr, &val))
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ }
+ else
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ }
+
+ return PCIBIOS_SUCCESSFUL;
+}
+//========================================================================================
+
+/*
+ * RTL8196b supports config word read access for 8/16/32 bit
+ *
+ * FIXME: currently only utilize 32bit access
+ */
+#ifdef PIN_208
+static int rtl8196b_pcibios1_read(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, unsigned int *val)
+{
+ unsigned int data = 0;
+ unsigned int addr = 0;
+
+ if (pci1_bus_number == 0xff)
+ pci1_bus_number = bus->number;
+
+ #if DEBUG_PRINTK
+ printk("File: %s, Function: %s, Line: %d\n", __FILE__, __FUNCTION__, __LINE__);
+ printk("Bus: %d, Slot: %d, Func: %d, Where: %d, Size: %d\n", bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn), where, size);
+ #endif
+
+ if (bus->number == pci1_bus_number)
+ {
+ /* PCIE host controller */
+ if (PCI_SLOT(devfn) == 0)
+ {
+ addr = BSP_PCIE1_H_CFG + where;
+
+ if (rtl8196b_pcibios_config_access(PCI_ACCESS_READ | PCI_32BIT_ACCESS, addr & ~(0x3), &data))
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ if (size == 1)
+ *val = (data >> ((where & 3) << 3)) & 0xff;
+ else if (size == 2)
+ *val = (data >> ((where & 3) << 3)) & 0xffff;
+ else
+ *val = data;
+ }
+ else
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ }
+ else if (bus->number == (pci1_bus_number + 1))
+ {
+ /* PCIE devices directly connected */
+ if (PCI_SLOT(devfn) == 0)
+ {
+ addr = BSP_PCIE1_D_CFG0 + (PCI_FUNC(devfn) << 12) + where;
+
+ if (rtl8196b_pcibios_config_access(PCI_ACCESS_READ | size, addr, val))
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ }
+ else
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ }
+ else
+ {
+ /* Devices connected through bridge */
+ if (PCI_SLOT(devfn) < MAX_NUM_DEV)
+ {
+ WRITE_MEM32(BSP_PCIE1_H_IPCFG, ((bus->number) << 8) | (PCI_SLOT(devfn) << 3) | PCI_FUNC(devfn));
+ addr = BSP_PCIE1_D_CFG1 + where;
+
+ if (rtl8196b_pcibios_config_access(PCI_ACCESS_READ | size, addr, val))
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ }
+ else
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ }
+
+ #if DEBUG_PRINTK
+ printk("0xb8000014:%x\n",REG32(0xb8000014));
+ //printk("File: %s, Function: %s, Line: %d\n", __FILE__, __FUNCTION__, __LINE__);
+ //printk("Read Value: 0x%08X\n", *val);
+ #endif
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+//========================================================================================
+static int rtl8196b_pcibios1_write(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, unsigned int val)
+{
+ unsigned int data = 0;
+ unsigned int addr = 0;
+
+ static int pci1_bus_number = 0xff;
+
+ if (pci1_bus_number == 0xff)
+ pci1_bus_number = bus->number;
+
+ #if DEBUG_PRINTK
+ printk("0xb8000014:%x\n",REG32(0xb8000014));
+ //printk("File: %s, Function: %s, Line: %d\n", __FILE__, __FUNCTION__, __LINE__);
+ //printk("Bus: %d, Slot: %d, Func: %d, Where: %d, Size: %d\n", bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn), where, size);
+ #endif
+
+
+ if (bus->number == pci1_bus_number)
+ {
+ /* PCIE host controller */
+ if (PCI_SLOT(devfn) == 0)
+ {
+ addr = BSP_PCIE1_H_CFG + where;
+
+ if (rtl8196b_pcibios_config_access(PCI_ACCESS_READ | PCI_32BIT_ACCESS, addr & ~(0x3), &data))
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ if (size == 1)
+ data = (data & ~(0xff << ((where & 3) << 3))) | (val << ((where & 3) << 3));
+ else if (size == 2)
+ data = (data & ~(0xffff << ((where & 3) << 3))) | (val << ((where & 3) << 3));
+ else
+ data = val;
+
+ if (rtl8196b_pcibios_config_access(PCI_ACCESS_WRITE | PCI_32BIT_ACCESS, addr & ~(0x3), &data))
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ }
+ else
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ }
+ else if (bus->number == (pci1_bus_number + 1))
+ {
+ /* PCIE devices directly connected */
+ if (PCI_SLOT(devfn) == 0)
+ {
+ addr = BSP_PCIE1_D_CFG0 + (PCI_FUNC(devfn) << 12) + where;
+
+ if (rtl8196b_pcibios_config_access(PCI_ACCESS_WRITE | size, addr, &val))
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ }
+ else
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ }
+ else
+ {
+ /* Devices connected through bridge */
+ if (PCI_SLOT(devfn) < MAX_NUM_DEV)
+ {
+ WRITE_MEM32(BSP_PCIE1_H_IPCFG, ((bus->number) << 8) | (PCI_SLOT(devfn) << 3) | PCI_FUNC(devfn));
+ addr = BSP_PCIE1_D_CFG1 + where;
+
+ if (rtl8196b_pcibios_config_access(PCI_ACCESS_WRITE | size, addr, &val))
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ }
+ else
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ }
+
+ return PCIBIOS_SUCCESSFUL;
+}
+#endif
+//========================================================================================
+struct pci_ops rtl8196b_pci0_ops = {
+ .read = rtl8196b_pcibios0_read,
+ .write = rtl8196b_pcibios0_write
+};
+
+#ifdef PIN_208
+struct pci_ops rtl8196b_pci1_ops = {
+ .read = rtl8196b_pcibios1_read,
+ .write = rtl8196b_pcibios1_write
+};
+#endif
+
+static struct pci_controller rtl8196b_pci0_controller = {
+ .pci_ops = &rtl8196b_pci0_ops,
+ .mem_resource = &rtl8196b_pci0_mem_resource,
+ .io_resource = &rtl8196b_pci0_io_resource,
+};
+
+#ifdef PIN_208
+static struct pci_controller rtl8196b_pci1_controller = {
+ .pci_ops = &rtl8196b_pci1_ops,
+ .mem_resource = &rtl8196b_pci1_mem_resource,
+ .io_resource = &rtl8196b_pci1_io_resource,
+};
+#endif
+
+//========================================================================================
+int pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+ #if DEBUG_PRINTK
+ printk("File: %s, Function: %s, Line: %d\n", __FILE__, __FUNCTION__, __LINE__);
+ printk("**Slot: %d\n", slot);
+ printk("**Pin: %d\n", pin);
+ printk("**Dev->BUS->Number: %d\n", dev->bus->number);
+ #endif
+
+#if defined(CONFIG_RTL_819XD)
+ if (dev->bus->number < pci1_bus_number)
+ return BSP_PCIE_IRQ;
+ else
+ return BSP_PCIE2_IRQ;
+#else
+ return BSP_PCIE_IRQ;
+#endif
+}
+//========================================================================================
+/* Do platform specific device initialization at pci_enable_device() time */
+int pcibios_plat_dev_init(struct pci_dev *dev)
+{
+ #if DEBUG_PRINTK
+ printk("File: %s, Function: %s, Line: %d\n", __FILE__, __FUNCTION__, __LINE__);
+ #endif
+
+ return 0;
+}
+
+static __init int bsp_pcie_init(void)
+{
+
+ int Use_External_PCIE_CLK=0;
+ int result=0,result1=0;
+
+ printk("<<<<<Register 1st PCI Controller>>>>>\n");
+ mdelay(1);
+
+ //sry i need more time to figure out all how that stuff should coorectly work
+ #if defined(CONFIG_RTL_8196C)
+ result=PCIE_reset_procedure(0, 0, 1);
+ if (result)
+ register_pci_controller(&rtl8196b_pci0_controller);
+ else
+ REG32(CLK_MANAGE) &= (~(1<<11)); //disable active_pcie0
+ #elif defined(CONFIG_RTL_819XD)
+ #ifndef CONFIG_RTL_DUAL_PCIESLOT_BIWLAN_D
+ #ifndef PIN_208
+ result=PCIE_reset_procedure(0, Use_External_PCIE_CLK, 1);
+ #else
+ result=PCIE_reset_procedure(0, Use_External_PCIE_CLK, 1);
+ mdelay(1);
+ result1=PCIE_reset_procedure(1, Use_External_PCIE_CLK, 1);
+ #endif
+ #else //wei add
+ OnlyOneReset();
+
+ result=PCIE_Check_Link(0);
+ result1=PCIE_Check_Link(1);
+
+ #endif
+
+ #if DEBUG_PRINTK
+ printk("<<<<<Register 1st PCI Controller>>>>>\n");
+ #ifdef PIN_208
+ printk("<<<<<Register 2nd PCI Controller>>>>>\n");
+ #endif
+ #endif
+ mdelay(1);
+ #ifndef CONFIG_RTL_DUAL_PCIESLOT_BIWLAN_D
+ if(result)
+ register_pci_controller(&rtl8196b_pci0_controller);
+ else
+ {
+ REG32(CLK_MANAGE) &= (~(1<<14)); //disable active_pcie0
+ }
+ #ifdef PIN_208
+ if(result1)
+ register_pci_controller(&rtl8196b_pci1_controller);
+ else
+ {
+ REG32(CLK_MANAGE) &= (~(1<<16)); //disable active_pcie1
+ }
+ #endif
+ #else
+
+ if(result1)
+ register_pci_controller(&rtl8196b_pci1_controller);
+ else
+ { REG32(CLK_MANAGE) &= (~(1<<16)); //disable active_pcie1
+ }
+
+
+ if(result)
+ register_pci_controller(&rtl8196b_pci0_controller);
+ else
+ { REG32(CLK_MANAGE) &= (~(1<<14)); //disable active_pcie0
+ }
+
+
+ #endif
+ #endif
+
+ return 0
+}
+
+arch_initcall(bsp_pcie_init);
diff --git a/target/linux/realtek/files/arch/rlx/bsp/prom.c b/target/linux/realtek/files/arch/rlx/bsp/prom.c
new file mode 100644
index 000000000..1580cc1fe
--- /dev/null
+++ b/target/linux/realtek/files/arch/rlx/bsp/prom.c
@@ -0,0 +1,184 @@
+/*
+ * Copyright (C) 2006, Realtek Semiconductor Corp.
+ * Copyright (C) 2013, Artur Artamonov (artur@advem.lv)
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <asm/bootinfo.h>
+#include <asm/addrspace.h>
+#include <asm/page.h>
+#include <asm/cpu.h>
+
+#include <asm/rlxbsp.h>
+
+#include "bspchip.h"
+#include "bspcpu.h"
+#include "rlxhack.h"
+
+extern char arcs_cmdline[];
+
+#ifdef CONFIG_EARLY_PRINTK
+static int promcons_output __initdata = 0;
+
+void unregister_prom_console(void)
+{
+ if (promcons_output) {
+ promcons_output = 0;
+ }
+}
+
+void disable_early_printk(void)
+ __attribute__ ((alias("unregister_prom_console")));
+#endif
+
+
+const char *get_system_type(void)
+{
+#if defined(CONFIG_RTL_8196C)
+ return "RTL8196C";
+#elif defined(CONFIG_RTL_819XD)
+ return "RTL819xD";
+#endif
+}
+
+/* Do basic initialization */
+void __init bsp_init(void)
+{
+ u_long mem_size;
+
+ /*user CMLLINE created by menuconfig*/
+ /*
+ arcs_cmdline[0] = '\0';
+ strcpy(arcs_cmdline, "console=ttyS0,38400");
+ */
+
+#if defined(CONFIG_RTL_819X)
+ #ifdef cpu_mem_size
+ mem_size = cpu_mem_size;
+ #elif defined(RTL_8198_NFBI_BOARD)
+ mem_size = ((7 << 20)-16); //reserve 16 byte for firmware header;
+ #endif
+ /*now: alway believe DRAM configuration register*/
+ {
+ unsigned int DCRvalue = 0;
+ unsigned int bus_width = 0, chip_sel = 0, row_cnt = 0, col_cnt = 0,bank_cnt = 0;
+
+ DCRvalue = ( (*(volatile unsigned int *)BSP_MC_MTCR0));
+
+ /*bit 19,0:2 bank; 1: 4 bank*/
+ switch(DCRvalue & 0x080000)
+ {
+ case 0x0:
+ bank_cnt = 2;
+ break;
+ case 0x080000:
+ bank_cnt = 4;
+ break;
+ default:
+ bank_cnt = 0;
+ break;
+ }
+
+ /*bit 22~24: colomn count*/
+ switch(DCRvalue & 0x01C00000)
+ {
+ case 0x00000000:
+ col_cnt = 256;
+ break;
+ case 0x00400000:
+ col_cnt = 512;
+ break;
+ case 0x00800000:
+ col_cnt = 1024;
+ break;
+ case 0x00C00000:
+ col_cnt = 2048;
+ break;
+ case 0x01000000:
+ col_cnt = 4096;
+ break;
+ default:
+ printk("unknow colomn count(0x%x)\n",DCRvalue & 0x01C00000);
+ break;
+ }
+
+ /*bit 25~26: row count*/
+ switch(DCRvalue & 0x06000000)
+ {
+ case 0x00000000:
+ row_cnt = 2048;
+ break;
+ case 0x02000000:
+ row_cnt = 4096;
+ break;
+ case 0x04000000:
+ row_cnt = 8192;
+ break;
+ case 0x06000000:
+ row_cnt = 16384;
+ break;
+ default:
+ printk("unknow row count(0x%x)\n",DCRvalue & 0x06000000);
+ break;
+ }
+
+ /*bit 27: chip select*/
+ switch(DCRvalue & 0x08000000)
+ {
+ case 0x0:
+ chip_sel = 1;
+ break;
+ case 0x08000000:
+ chip_sel = 2;
+ break;
+ default:
+ printk("unknow chip select(0x%x)\n",DCRvalue & 0x08000000);
+ break;
+ }
+
+ /*bit 28~29: bus width*/
+ switch(DCRvalue & 0x30000000)
+ {
+ case 0x0:
+ bus_width = 8;
+ break;
+ case 0x10000000:
+ bus_width = 16;
+ break;
+ case 0x20000000:
+ bus_width = 32;
+ break;
+ default:
+ printk("bus width is reseved!\n");
+ break;
+ }
+
+ /*total size(Byte)*/
+ if((REG32(0xb800100C)&0x40000000) == 0x40000000)
+ {
+ mem_size = (row_cnt * col_cnt *bank_cnt) * (bus_width >> 3) * chip_sel*2;
+ }
+ else
+ {
+ mem_size = (row_cnt * col_cnt *bank_cnt) * (bus_width >> 3) * chip_sel;
+ }
+ }
+#else
+ mem_size = cpu_mem_size;
+#endif
+ add_memory_region(0, mem_size, BOOT_MEM_RAM);
+}
+
+void __init bsp_free_prom_memory(void)
+{
+ return;
+}
diff --git a/target/linux/realtek/files/arch/rlx/bsp/rlxhack.h b/target/linux/realtek/files/arch/rlx/bsp/rlxhack.h
new file mode 100644
index 000000000..5d7d87433
--- /dev/null
+++ b/target/linux/realtek/files/arch/rlx/bsp/rlxhack.h
@@ -0,0 +1,21 @@
+#ifndef __RLXHACK_H
+#define __RLXHACK_H
+
+/*
+ * Register access macro
+ */
+
+#define REG32(reg) (*(volatile unsigned int *)((unsigned int)reg))
+#define REG16(reg) (*(volatile unsigned short *)((unsigned int)reg))
+#define REG08(reg) (*(volatile unsigned char *)((unsigned int)reg))
+#define REG8(reg) (*(volatile unsigned char *)((unsigned int)reg))
+
+#define WRITE_MEM32(addr, val) (*(volatile unsigned int *) (addr)) = (val)
+#define READ_MEM32(addr) (*(volatile unsigned int *) (addr))
+#define WRITE_MEM16(addr, val) (*(volatile unsigned short *) (addr)) = (val)
+#define READ_MEM16(addr) (*(volatile unsigned short *) (addr))
+#define WRITE_MEM8(addr, val) (*(volatile unsigned char *) (addr)) = (val)
+#define READ_MEM8(addr) (*(volatile unsigned char *) (addr))
+
+
+#endif
diff --git a/target/linux/realtek/files/arch/rlx/bsp/serial.c b/target/linux/realtek/files/arch/rlx/bsp/serial.c
new file mode 100644
index 000000000..f4e1ef19d
--- /dev/null
+++ b/target/linux/realtek/files/arch/rlx/bsp/serial.c
@@ -0,0 +1,94 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * Copyright (C) 2006, Realtek Semiconductor Corp.
+ * Copyright (C) 2013, Artur Artamonov <artur@advem.lv>
+ */
+
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+#include <linux/serial_8250.h>
+#include <linux/string.h>
+
+#include <asm/serial.h>
+
+#include "bspchip.h"
+
+void __init bsp_serial_init(void)
+{
+#ifdef CONFIG_SERIAL_SC16IS7X0
+ extern void __init sc16is7x0_get_port( struct uart_port *port );
+#endif
+#if defined( CONFIG_SERIAL_SC16IS7X0 ) || defined( CONFIG_SERIAL_RTL8198_UART1 )
+ unsigned int line = 0;
+#else
+ const unsigned int line = 0;
+#endif
+ struct uart_port s;
+
+ /* clear memory */
+ memset(&s, 0, sizeof(s));
+
+ /*
+ * UART0
+ */
+ s.line = line;
+ s.type = PORT_16550A;
+ s.irq = BSP_UART0_IRQ;
+ s.iotype = UPIO_MEM;
+ s.regshift = 2;
+#if 1
+ s.uartclk = BSP_SYS_CLK_RATE;
+ s.fifosize = 16;
+ //s.flags = UPF_SKIP_TEST | UPF_LOW_LATENCY;
+ s.flags = UPF_SKIP_TEST;
+ s.mapbase = BSP_UART0_MAP_BASE;
+ //s.membase = ioremap_nocache(s.mapbase, BSP_UART0_MAPSIZE);
+ s.membase = ioremap_nocache(s.mapbase, 0x20);
+#else
+ s.uartclk = BSP_SYS_CLK_RATE - BSP_BAUDRATE * 24; //???
+ s.fifosize = 1; //???
+ s.flags = UPF_SKIP_TEST | UPF_LOW_LATENCY | UPF_SPD_CUST;
+ s.membase = (unsigned char *)BSP_UART0_BASE;
+ s.custom_divisor = BSP_SYS_CLK_RATE / (BSP_BAUDRATE * 16) - 1;
+#endif
+
+ if (early_serial_setup(&s) != 0)
+ {
+ #if defined(CONFIG_RTL_8196C)
+ panic("RTL8196C: bsp_serial_init failed!");
+ #elif defined(CONFIG_RTL_819XD)
+ panic("RTL8196D: bsp_serial_init failed!");
+ #endif
+ }
+#ifdef CONFIG_SERIAL_RTL8198_UART1
+ // UART1
+ #define UART_BASE 0xB8000100 //0xb8002100 uart 1
+ REG32(0xb8000040) = (REG32(0xb8000040) & ~(0x3<<3)) | (0x01<<3); //pin mux to UART1
+ REG32(0xb8002110) |= (1<<29); //enable flow control
+ s.line = ++ line;
+ s.irq = BSP_UART1_IRQ;
+ s.mapbase = BSP_UART1_MAP_BASE;
+ s.membase = ioremap_nocache(s.mapbase, 0x20);
+
+ if (early_serial_setup(&s) != 0) {
+ panic("RTL819xD: bsp_serial_init UART1 failed!");
+ }
+#endif
+
+#ifdef CONFIG_SERIAL_SC16IS7X0
+ sc16is7x0_get_port( &s );
+ s.line = ++ line;
+
+ if (early_serial_setup(&s) != 0) {
+ panic("RTL819xD: bsp_serial_init i2c uart failed!");
+ }
+#endif
+}
diff --git a/target/linux/realtek/files/arch/rlx/bsp/setup.c b/target/linux/realtek/files/arch/rlx/bsp/setup.c
new file mode 100644
index 000000000..94032c9ba
--- /dev/null
+++ b/target/linux/realtek/files/arch/rlx/bsp/setup.c
@@ -0,0 +1,193 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * Copyright (C) 2006, Realtek Semiconductor Corp.
+ * Copyright (C) 2013, Artur Artamonov (artur@advem.lv)
+ */
+
+#include <linux/console.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/netdevice.h>
+#include <linux/rtnetlink.h>
+
+#include <asm/addrspace.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+
+#include <asm/bootinfo.h>
+#include <asm/time.h>
+#include <asm/reboot.h>
+#include <asm/rlxbsp.h>
+
+#include <asm/rtl865x/rtl865xc_asicregs.h>
+
+#include "bspchip.h"
+
+extern int bsp_swcore_init(unsigned int version);
+
+static void prom_putchar(char c)
+{
+#define UART0_BASE 0xB8002000
+#define UART0_THR (UART0_BASE + 0x000)
+#define UART0_FCR (UART0_BASE + 0x008)
+#define UART0_LSR (UART0_BASE + 0x014)
+#define TXRST 0x04
+#define CHAR_TRIGGER_14 0xC0
+#define LSR_THRE 0x20
+#define TxCHAR_AVAIL 0x00
+#define TxCHAR_EMPTY 0x20
+unsigned int busy_cnt = 0;
+
+ do
+ {
+ /* Prevent Hanging */
+ if (busy_cnt++ >= 30000)
+ {
+ /* Reset Tx FIFO */
+ REG8(UART0_FCR) = TXRST | CHAR_TRIGGER_14;
+ return;
+ }
+ } while ((REG8(UART0_LSR) & LSR_THRE) == TxCHAR_AVAIL);
+
+ /* Send Character */
+ REG8(UART0_THR) = c;
+}
+
+static void early_console_write(const char *s, unsigned n)
+{
+ while (n-- && *s) {
+ if (*s == '\n')
+ prom_putchar('\r');
+ prom_putchar(*s);
+ s++;
+ }
+}
+
+
+static void shutdown_netdev(void)
+{
+ struct net_device *dev;
+
+ printk("Shutdown network interface\n");
+ read_lock(&dev_base_lock);
+
+ for_each_netdev(&init_net, dev)
+ {
+ if(dev->flags &IFF_UP)
+ {
+ printk("%s:===>\n",dev->name);
+ rtnl_lock();
+#if defined(CONFIG_COMPAT_NET_DEV_OPS)
+ if(dev->stop)
+ dev->stop(dev);
+#else
+ if ((dev->netdev_ops)&&(dev->netdev_ops->ndo_stop))
+ dev->netdev_ops->ndo_stop(dev);
+#endif
+ rtnl_unlock();
+ }
+ }
+#if defined(CONFIG_RTL8192CD) || defined(CONFIG_RTL8192E)
+ {
+ extern void force_stop_wlan_hw(void);
+ force_stop_wlan_hw();
+ }
+#endif
+ read_unlock(&dev_base_lock);
+}
+
+static void bsp_machine_restart(char *command)
+{
+ static void (*back_to_prom)(void) = (void (*)(void)) 0xbfc00000;
+
+ REG32(GIMR)=0;
+
+ local_irq_disable();
+#ifdef CONFIG_NET
+ shutdown_netdev();
+#endif
+ REG32(BSP_WDTCNR) = 0; //enable watch dog
+ while (1) ;
+ /* Reboot */
+ back_to_prom();
+}
+
+static void bsp_machine_halt(void)
+{
+ while(1);
+}
+
+static void bsp_machine_power_off(void)
+{
+ while(1);
+}
+
+/*
+ * callback function
+ */
+extern void _imem_dmem_init(void);
+void __init bsp_setup(void)
+{
+ int ret= -1;
+ unsigned int version = 0;
+ #if defined(CONFIG_RTL_819XD)
+ if((REG32(0xb8000000)&0xf)<3)
+ {
+ REG32(0xb8000088)= (REG32(0xb8000088) & ( ~(3<<5)&~(0xF<<0)));
+ //printk("0xb8000088=%x\n",REG32(0xb8000088));
+ REG32(0xb8000088) =(REG32(0xb8000088)|(1<<4));
+ //printk("0xb8000088=%x\n",REG32(0xb8000088));
+ REG32(0xb8000088) = REG32(0xb8000088) & (~(3<<7));
+ //printk("0xb8000088=%x\n",REG32(0xb8000088));
+ }
+ #endif
+
+ /* define io/mem region */
+ ioport_resource.start = 0x18000000;
+ ioport_resource.end = 0x1fffffff;
+
+ iomem_resource.start = 0x18000000;
+ iomem_resource.end = 0x1fffffff;
+
+ /* set reset vectors */
+ _machine_restart = bsp_machine_restart;
+ _machine_halt = bsp_machine_halt;
+ pm_power_off = bsp_machine_power_off;
+
+#if defined(CONFIG_RTL_819XD)
+ #if defined(CONFIG_RTL_DUAL_PCIESLOT_BIWLAN_D)
+ {
+ unsigned int tmp=0,tmp1=0,tmp2=0;
+ tmp1=REG32(0xb8001004);
+ if((REG32(0xb8001000)&0x80000000)==0x80000000)
+ {
+ //REG32(0xb8001008)=0x6d13a4c0;
+ REG32(0xb8001004)=tmp1;
+ }
+ }
+ #endif
+#endif
+
+ #if defined(CONFIG_RTL_8196C)
+ version = 15;
+ #elif defined(CONFIG_RTL_819XD)
+ version = 8;
+ #endif
+ /* initialize uart */
+ bsp_serial_init();
+ _imem_dmem_init();
+
+ /* initialize switch core */
+#if defined(CONFIG_RTL_819X)
+ ret = bsp_swcore_init(version);
+ if(ret != 0)
+ {
+ bsp_machine_halt();
+ }
+#endif
+}
diff --git a/target/linux/realtek/files/arch/rlx/bsp/timer.c b/target/linux/realtek/files/arch/rlx/bsp/timer.c
new file mode 100644
index 000000000..137e73557
--- /dev/null
+++ b/target/linux/realtek/files/arch/rlx/bsp/timer.c
@@ -0,0 +1,146 @@
+/*
+ * linux/arch/rlx/rlxocp/time.c
+ *
+ * Copyright (C) 1999 Harald Koerfgen
+ * Copyright (C) 2000 Pavel Machek (pavel@suse.cz)
+ * Copyright (C) 2001 Steven J. Hill (sjhill@realitydiluted.com)
+ * Copyright (C) 2006 Realtek Semiconductor Corp.
+ * Copyright (C) 2013 Artur Artamonov (artur@advem.lv)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Time handling functinos for Philips Nino.
+ */
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+#include <linux/timex.h>
+#include <linux/delay.h>
+
+#include <asm/time.h>
+#include <asm/rlxbsp.h>
+
+#include "bspchip.h"
+#include "rlxhack.h"
+
+#ifdef CONFIG_RTL_TIMER_ADJUSTMENT
+#include <net/rtl/rtl_types.h>
+#include <rtl865xc_asicregs.h>
+
+void rtl865x_setupTimer1(void)
+{
+ WRITE_MEM32( BSP_TCCNR, READ_MEM32(BSP_TCCNR) & ~BSP_TC1EN );/* Disable timer1 */
+ #ifdef CONFIG_RTL8196C_REVISION_B
+ WRITE_MEM32( BSP_TC1DATA, 0xfffffff0);
+ #else
+ WRITE_MEM32( BSP_TC1DATA, 0xffffff00);
+ #endif
+ WRITE_MEM32( BSP_TCCNR, ( READ_MEM32(BSP_TCCNR) | BSP_TC1EN ) | BSP_TC1MODE_TIMER );/* Enable timer1 - timer mode */
+ WRITE_MEM32( BSP_TCIR, READ_MEM32(BSP_TCIR) & ~BSP_TC1IE ); /* Disable timer1 interrupt */
+}
+#endif
+
+void inline bsp_timer_ack(void)
+{
+ REG32(BSP_TCIR) |= BSP_TC0IP;
+}
+
+void __init bsp_timer_init(void)
+{
+ unsigned int sys_clock_rate;
+
+ sys_clock_rate = BSP_SYS_CLK_RATE;
+
+ /* Clear Timer IP status */
+ if (REG32(BSP_TCIR) & BSP_TC0IP)
+ REG32(BSP_TCIR) |= BSP_TC0IP;
+
+ /* disable timer */
+ REG32(BSP_TCCNR) = 0; /* disable timer before setting CDBR */
+
+ /* initialize timer registers */
+#if defined(CONFIG_RTL_8196C)
+ REG32(BSP_CDBR)=(BSP_DIVISOR*8) << BSP_DIVF_OFFSET;
+ #ifdef CONFIG_RTL8196C_REVISION_B
+ if (REG32(BSP_REVR) == RTL8196C_REVISION_B)
+ REG32(BSP_TC0DATA) = (((sys_clock_rate/(BSP_DIVISOR*8))/HZ)) << 4;
+ else
+ #endif
+ REG32(BSP_TC0DATA) = (((sys_clock_rate/(BSP_DIVISOR*8))/HZ)) << BSP_TCD_OFFSET;
+
+//when will add one more platform change to more generic code
+#elif defined(CONFIG_RTL_819XD)
+ REG32(BSP_CDBR)=(BSP_DIVISOR) << BSP_DIVF_OFFSET;
+ #if defined(CONFIG_RTL8198_REVISION_B) || defined(CONFIG_RTL_819XD)
+ if ((REG32(BSP_REVR) >= BSP_RTL8198_REVISION_B) || ((REG32(BSP_REVR) & 0xFFFFF000) == BSP_RTL8197D))
+ REG32(BSP_TC0DATA) = (((sys_clock_rate/BSP_DIVISOR)/HZ)) << 4;
+ else
+ #endif
+ REG32(BSP_TC0DATA) = (((sys_clock_rate/BSP_DIVISOR)/HZ)) << BSP_TCD_OFFSET;
+ #if defined(CONFIG_RTL_WTDOG)
+ #ifdef CONFIG_RTK_VOIP
+ {
+ extern void bsp_enable_watchdog( void );
+ bsp_enable_watchdog();
+ }
+ #else
+ REG32(BSP_WDTCNR) = 0x00600000;
+ #endif
+ #endif
+#endif
+
+
+ // extend timer base to 4 times
+ //REG32(BSP_CDBR)=(BSP_DIVISOR*4) << BSP_DIVF_OFFSET;
+ //REG32(BSP_TC0DATA) = (((sys_clock_rate/(BSP_DIVISOR*4))/HZ)) << BSP_TCD_OFFSET;
+#if defined(CONFIG_RTL_WTDOG)
+ REG32(BSP_WDTCNR) = 0x00600000;
+#endif
+
+ /* hook up timer interrupt handler */
+ rlx_clockevent_init(BSP_TC0_IRQ);
+
+ /* enable timer */
+ REG32(BSP_TCCNR) = BSP_TC0EN | BSP_TC0MODE_TIMER;
+ REG32(BSP_TCIR) = BSP_TC0IE;
+#ifdef CONFIG_RTL_TIMER_ADJUSTMENT
+ rtl865x_setupTimer1();
+#endif
+
+}
+
+#ifdef CONFIG_RTK_VOIP
+void timer1_enable(void)
+{
+ printk( "timer1_enable not implement!!\n" );
+}
+
+void timer1_disable(void)
+{
+ printk( "timer1_disable not implement!!\n" );
+}
+
+#ifdef CONFIG_RTL_WTDOG
+int bBspWatchdog = 0;
+
+void bsp_enable_watchdog( void )
+{
+ bBspWatchdog = 1;
+ *(volatile unsigned long *)(0xb800311C)=0x00600000;
+}
+
+void bsp_disable_watchdog( void )
+{
+ *(volatile unsigned long *)(0xb800311C)=0xA5600000;
+ bBspWatchdog = 0;
+}
+#endif // CONFIG_RTL_WTDOG
+
+#endif // CONFIG_RTK_VOIP
diff --git a/target/linux/realtek/files/arch/rlx/bsp/vmlinux.lds.S b/target/linux/realtek/files/arch/rlx/bsp/vmlinux.lds.S
new file mode 100644
index 000000000..80048359f
--- /dev/null
+++ b/target/linux/realtek/files/arch/rlx/bsp/vmlinux.lds.S
@@ -0,0 +1,296 @@
+#include <asm/asm-offsets.h>
+#include <asm-generic/vmlinux.lds.h>
+
+#undef mips
+#define mips mips
+OUTPUT_ARCH(mips)
+ENTRY(kernel_entry)
+PHDRS {
+ text PT_LOAD FLAGS(7); /* RWX */
+ note PT_NOTE FLAGS(4); /* R__ */
+}
+jiffies = JIFFIES;
+
+SECTIONS
+{
+ . = LOADADDR;
+ /* read-only */
+ _text = .; /* Text and read-only data */
+ .text : {
+ TEXT_TEXT
+ SCHED_TEXT
+ LOCK_TEXT
+ KPROBES_TEXT
+ *(.text.*)
+ *(.fixup)
+ *(.gnu.warning)
+/*#ifdef CONFIG_RTL8192SE*/
+#if 1
+ /* start of wlan f/w definition */
+ __fw_start = . ;
+ *(.rtl8192sfw.bin)
+ __fw_end = . ;
+
+ __AGC_TAB_start = . ;
+ *(.AGC_TAB.txt)
+ __AGC_TAB_end = . ;
+
+ __phy_reg_start = . ;
+ *(.phy_reg.txt)
+ __phy_reg_end = . ;
+
+ __phy_reg_MP_start = . ;
+ *(.phy_reg_MP.txt)
+ __phy_reg_MP_end = . ;
+
+ __MACPHY_REG_start = . ;
+ *(.MACPHY_REG.txt)
+ __MACPHY_REG_end = . ;
+
+ __radio_a_start = . ;
+ *(.radio_a.txt)
+ __radio_a_end = . ;
+
+ __radio_b_start = . ;
+ *(.radio_b.txt)
+ __radio_b_end = . ;
+
+ __PHY_REG_PG_start = .;
+ *(.PHY_REG_PG.txt)
+ __PHY_REG_PG_end = .;
+
+ __PHY_to1T2R_start = .;
+ *(.PHY_to1T2R.txt)
+ __PHY_to1T2R_end = .;
+
+ __PHY_to1T2R_b_start = .;
+ *(.PHY_to1T2R_b.txt)
+ __PHY_to1T2R_b_end = .;
+
+ __PHY_to1T1R_start = .;
+ *(.PHY_to1T1R.txt)
+ __PHY_to1T1R_end = .;
+
+ __PHY_to1T1R_b_start = .;
+ *(.PHY_to1T1R_b.txt)
+ __PHY_to1T1R_b_end = .;
+
+ __radio_a_hp_start = . ;
+ *(.radio_a_hp.txt)
+ __radio_a_hp_end = . ;
+
+ /* end of wlan f/w definition */
+#endif
+
+ } :text = 0
+ _etext = .; /* End of text section */
+
+ /* Exception table */
+ . = ALIGN(16);
+ __ex_table : {
+ __start___ex_table = .;
+ *(__ex_table)
+ __stop___ex_table = .;
+ }
+
+ /* Exception table for data bus errors */
+ __dbe_table : {
+ __start___dbe_table = .;
+ *(__dbe_table)
+ __stop___dbe_table = .;
+ }
+
+ . = ALIGN(16384);
+ __iram = . ;
+ .iram :
+ {
+ *(.iram-gen) /* general usage (essential) */
+ *(.iram-fwd) /* general packet forwarding used */
+ *(.iram-rtkwlan) /* realtek wlan driver */
+ *(.iram-l2-fwd) /* L2 packet forwarding */
+ *(.iram-l34-fwd) /* L34 packet forwarding */
+ *(.iram-tx) /* protocol stack TX */
+ *(.iram-extdev) /* ROMEDRV extension device fwd */
+ *(.iram-crypto) /* authetication / crypto-engine */
+ *(.iram-voip) /* voip */
+ *(.iram) /* other usage */
+ *(.iram.1)
+ }
+
+ . = ALIGN(8192);
+ __dram = . ;
+ __dram_start = . ;
+ .dram :
+ {
+ *(.dram-wapi) /*wapi encryption/decryption used*/
+ *(.dram-gen) /* general usage (essential) */
+ *(.dram-fwd) /* general packet forwarding used */
+ *(.dram-l2-fwd) /* L2 packet forwarding */
+ *(.dram-l34-fwd) /* L34 packet forwarding */
+ *(.dram-extdev) /* ROMEDRV extension device fwd */
+ *(.dram-rtkwlan) /* realtek wlan driver */
+ *(.dram-crypto) /* authetication / crypto-engine */
+ *(.dram-voip) /* voip */
+ *(.dram-tx) /* protocol stack TX */
+ *(.dram) /* other usage */
+ *(.dram.1)
+ }
+ . = ALIGN(8192);
+ __dram_end = . ;
+
+ NOTES :text :note
+ .dummy : { *(.dummy) } :text
+
+ RODATA
+
+ /* writeable */
+ .data : { /* Data */
+ . = . + DATAOFFSET; /* for CONFIG_MAPPED_KERNEL */
+ /*
+ * This ALIGN is needed as a workaround for a bug a
+ * gcc bug upto 4.1 which limits the maximum alignment
+ * to at most 32kB and results in the following
+ * warning:
+ *
+ * CC arch/mips/kernel/init_task.o
+ * arch/mips/kernel/init_task.c:30: warning: alignment
+ * of ‘init_thread_union�is greater than maximum
+ * object file alignment. Using 32768
+ */
+ . = ALIGN(_PAGE_SIZE);
+ *(.data.init_task)
+
+ DATA_DATA
+ CONSTRUCTORS
+ }
+ _gp = . + 0x8000;
+ .lit8 : {
+ *(.lit8)
+ }
+ .lit4 : {
+ *(.lit4)
+ }
+ /* We want the small data sections together, so single-instruction offsets
+ can access them all, and initialized data all before uninitialized, so
+ we can shorten the on-disk segment size. */
+ .sdata : {
+ *(.sdata)
+ }
+
+ . = ALIGN(_PAGE_SIZE);
+ .data_nosave : {
+ __nosave_begin = .;
+ *(.data.nosave)
+ }
+ . = ALIGN(_PAGE_SIZE);
+ __nosave_end = .;
+
+ . = ALIGN(1 << 5);
+ .data.cacheline_aligned : {
+ *(.data.cacheline_aligned)
+ }
+ _edata = .; /* End of data section */
+
+ /* will be freed after init */
+ . = ALIGN(_PAGE_SIZE); /* Init code and data */
+ __init_begin = .;
+ .init.text : {
+ _sinittext = .;
+ INIT_TEXT
+ _einittext = .;
+ }
+ .init.data : {
+ INIT_DATA
+ }
+ . = ALIGN(16);
+ .init.setup : {
+ __setup_start = .;
+ *(.init.setup)
+ __setup_end = .;
+ }
+
+ .initcall.init : {
+ __initcall_start = .;
+ INITCALLS
+ __initcall_end = .;
+ }
+
+ .con_initcall.init : {
+ __con_initcall_start = .;
+ *(.con_initcall.init)
+ __con_initcall_end = .;
+ }
+ SECURITY_INIT
+
+ /* .exit.text is discarded at runtime, not link time, to deal with
+ * references from .rodata
+ */
+ .exit.text : {
+ EXIT_TEXT
+ }
+ .exit.data : {
+ EXIT_DATA
+ }
+#if defined(CONFIG_BLK_DEV_INITRD)
+ . = ALIGN(_PAGE_SIZE);
+ .init.ramfs : {
+ __initramfs_start = .;
+ *(.init.ramfs)
+ __initramfs_end = .;
+ }
+#endif
+ PERCPU(_PAGE_SIZE)
+ . = ALIGN(_PAGE_SIZE);
+ __init_end = .;
+ /* freed after init ends here */
+
+ __bss_start = .; /* BSS */
+ .sbss : {
+ *(.sbss)
+ *(.scommon)
+ }
+ .bss : {
+ *(.bss)
+ *(COMMON)
+ }
+ __bss_stop = .;
+
+ _end = . ;
+
+ /* Sections to be discarded */
+ /DISCARD/ : {
+ *(.exitcall.exit)
+
+ /* ABI crap starts here */
+ *(.MIPS.options)
+ *(.options)
+ *(.pdr)
+ *(.reginfo)
+ }
+
+ /* These mark the ABI of the kernel for debuggers. */
+ .mdebug.abi32 : {
+ KEEP(*(.mdebug.abi32))
+ }
+ .mdebug.abi64 : {
+ KEEP(*(.mdebug.abi64))
+ }
+
+ /* This is the MIPS specific mdebug section. */
+ .mdebug : {
+ *(.mdebug)
+ }
+
+ STABS_DEBUG
+ DWARF_DEBUG
+
+ /* These must appear regardless of . */
+ .gptab.sdata : {
+ *(.gptab.data)
+ *(.gptab.sdata)
+ }
+ .gptab.sbss : {
+ *(.gptab.bss)
+ *(.gptab.sbss)
+ }
+}
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-11 12:39:29 +0000