diff options
author | Roman Yeryomin <roman@advem.lv> | 2013-08-21 14:46:32 +0300 |
---|---|---|
committer | Roman Yeryomin <roman@advem.lv> | 2013-08-21 14:46:32 +0300 |
commit | 6e8428d78c98c653f625aa0839437359306f99db (patch) | |
tree | 70c9b5bedc15ff93f4effaf8ce44fc4a130feaa9 /target/linux/realtek/base-files | |
parent | dee99ab0143122146ab7713cfe171790bc796dd3 (diff) |
Use newest realtek rtl8192cd driver from backfire alpha2 release.
Signed-off-by: Roman Yeryomin <roman@advem.lv>
Diffstat (limited to 'target/linux/realtek/base-files')
-rwxr-xr-x | target/linux/realtek/base-files/lib/wifi/realtek.sh | 325 |
1 files changed, 0 insertions, 325 deletions
diff --git a/target/linux/realtek/base-files/lib/wifi/realtek.sh b/target/linux/realtek/base-files/lib/wifi/realtek.sh deleted file mode 100755 index 27ba1f1e2..000000000 --- a/target/linux/realtek/base-files/lib/wifi/realtek.sh +++ /dev/null @@ -1,325 +0,0 @@ -#!/bin/sh -append DRIVERS "realtek" - -find_realtek_phy() { - local device="$1" - - local macaddr="$(config_get "$device" macaddr | tr 'A-Z' 'a-z')" - config_get phy "$device" phy - [ -z "$phy" -a -n "$macaddr" ] && { - cd /sys/class/net - for phy in $(ls -d wlan[0-9] 2>&-); do - [ "$macaddr" = "$(cat /sys/class/net/${phy}/address)" ] || continue - config_set "$device" phy "$phy" - break - done - config_get phy "$device" phy - } - [ -n "$phy" -a -d "/sys/class/net/$phy" ] || { - echo "phy for wifi device $1 not found" - return 1 - } - [ -z "$macaddr" ] && { - config_set "$device" macaddr "$(cat /sys/class/net/${phy}/address)" - } - return 0 -} - -scan_realtek() { - local device="$1" - local mainvif - local wds - - [ ${device%[0-9]} = "wlan" ] && config_set "$device" phy "$device" || find_realtek_phy "$device" || { - config_unset "$device" vifs - return 0 - } - config_get phy "$device" phy - - config_get vifs "$device" vifs - local _c=0 - for vif in $vifs; do - config_get_bool disabled "$vif" disabled 0 - [ $disabled = 0 ] || continue - - config_get mode "$vif" mode - case "$mode" in - adhoc|sta|ap|monitor) - # Only one vif is allowed on AP, station, Ad-hoc or monitor mode - [ -z "$mainvif" ] && { - mainvif="$vif" - config_set "$vif" ifname "$phy" - } - ;; - wds) - config_get ssid "$vif" ssid - [ -z "$ssid" ] && continue - config_set "$vif" ifname "${phy}wds${_c}" - _c=$(($_c + 1)) - addr="$ssid" - ${addr:+append wds "$vif"} - ;; - *) echo "$device($vif): Invalid mode, ignored."; continue;; - esac - done - config_set "$device" vifs "${mainvif:+$mainvif }${wds:+$wds}" -} - -disable_realtek() ( - local device="$1" - - find_realtek_phy "$device" || return 0 - config_get phy "$device" phy - - echo disable_realtek phy=$phy device=$device - - #doesn't work? - set_wifi_down "$device" - - include /lib/network -# while read line < //${phy}/wds; do -# set $line -# [ -f "/var/run/wifi-${1}.pid" ] && -# kill "$(cat "/var/run/wifi-${1}.pid")" -# ifconfig "$1" down -# unbridge "$1" -# iwpriv "$phy" wds_del "$2" -# done - - echo unbridge "$phy" - unbridge "$phy" - ifconfig "$phy" down - - return 0 -) - -enable_realtek() { - local device="$1" - - find_realtek_phy "$device" || return 0 - config_get phy "$device" phy - - config_get channel "$device" channel - [ -n "$channel" ] && iwconfig "$phy" channel "$channel" >/dev/null 2>/dev/null - - - config_get vifs "$device" vifs - local first=1 - echo device=$device vifs=$vifs - for vif in $vifs; do - config_get ifname "$vif" ifname - config_get ssid "$vif" ssid - config_get mode "$vif" mode - - echo vif=$vif ifname=$ifname - - [ "$mode" = "wds" ] || iwconfig "$phy" essid ${ssid:+-- }"${ssid:-any}" - - case "$mode" in - sta) - iwconfig "$phy" mode managed - config_get addr "$device" bssid - [ -z "$addr" ] || { - iwconfig "$phy" ap "$addr" - } - ;; - ap) iwconfig "$phy" mode master;; - wds) iwpriv "$phy" wds_add "$ssid";; - adhoc) iwconfig "$phy" mode ad-hoc;; - *) iwconfig "$phy" mode "$mode";; - esac - - [ "$first" = 1 ] && { - config_get rate "$vif" rate - [ -n "$rate" ] && iwconfig "$phy" rate "${rate%%.*}" - - config_get_bool hidden "$vif" hidden 0 - iwpriv "$phy" set_mib hiddenAP="$hidden" - - config_get frag "$vif" frag - [ -n "$frag" ] && iwconfig "$phy" frag "${frag%%.*}" - - config_get rts "$vif" rts - [ -n "$rts" ] && iwconfig "$phy" rts "${rts%%.*}" - - config_get maclist "$vif" maclist - [ -n "$maclist" ] && { - # flush MAC list - iwpriv "$phy" maccmd 3 - for mac in $maclist; do - iwpriv "$phy" addmac "$mac" - done - } - config_get macpolicy "$vif" macpolicy - case "$macpolicy" in - allow) - iwpriv "$phy" maccmd 2 - ;; - deny) - iwpriv "$phy" maccmd 1 - ;; - *) - # default deny policy if mac list exists - [ -n "$maclist" ] && iwpriv "$phy" maccmd 1 - ;; - esac - # kick all stations if we have policy explicitly set - [ -n "$macpolicy" ] && iwpriv "$phy" maccmd 4 - } - - config_get enc "$vif" encryption - case "$enc" in - WEP|wep) - for idx in 1 2 3 4; do - config_get key "$vif" "key${idx}" - iwconfig "$ifname" enc "[$idx]" "${key:-off}" - done - config_get key "$vif" key - key="${key:-1}" - case "$key" in - [1234]) iwconfig "$ifname" enc "[$key]";; - *) iwconfig "$ifname" enc "$key";; - esac - ;; - psk*|wpa*) - start_hostapd=1 - config_get key "$vif" key - ;; - esac - - local net_cfg bridge - net_cfg="$(find_net_config "$vif")" - echo net_cfg=$net_cfg > /dev/ttyS0 - # dirty workaround for wlan0 not appearing when router is started - bridge="br-lan" - - # set mac address from /etc/config/wireless - local macaddr - config_get macaddr "$device" macaddr - [ -z "$macaddr" ] || ifconfig "$device" hw ether "$macaddr" - - # set led to link/tx/rx (data,management) mode - # have to be here because router will lock in wlan0 will be up durig this - iwpriv "$ifname" set_mib led_type=11 - - sleep 4 - brctl show > /dev/ttyS0 - [ -z "$net_cfg" ] || { - #bridge="$(bridge_interface "$net_cfg")" - echo vif=$vif bridge=$bridge > /dev/ttyS0 - echo tree config_set "$vif" bridge "$bridge" > /dev/ttyS0 - config_set "$vif" bridge "$bridge" - echo house start_net "$ifname" "$net_cfg" > /dev/ttyS0 - - set | grep CONFIG_ > /dev/ttyS0 - start_net "$ifname" "$net_cfg" - } - sleep 1 - brctl show > /dev/ttyS0 - - # start hostapd anyway for now, it's much more stable than native ap mode - start_hostapd=1 - - [ -n "$start_hostapd" ] || { - local htmode - config_get htmode "$device" htmode - case "$htmode" in - *HT40-*) - iwpriv "$ifname" set_mib use40M=1 - iwpriv "$ifname" set_mib shortGI40M=1 - iwpriv "$ifname" set_mib 2ndchoffset=1 - ;; - *HT40+*) - iwpriv "$ifname" set_mib use40M=1 - iwpriv "$ifname" set_mib shortGI40M=1 - iwpriv "$ifname" set_mib 2ndchoffset=2 - ;; - esac - - # for 40MHz only mode - #TODO: enable after realtek merge with hostapd? - #iwpriw "$ifname" set_mib coexist=0 - - # enable Space-Time Block Coding for better throughput - #iwpriv "$ifname" set_mib stbc=1 - - #sleep 1 - ifconfig "$ifname" up - } - - #doesn't work? - set_wifi_up "$vif" "$ifname" - - case "$mode" in - ap) - if [ -n "$start_hostapd" ] && eval "type hostapd_setup_vif" 2>/dev/null >/dev/null; then - hostapd_setup_vif "$vif" realtek || { - echo "enable_realtek($device): Failed to set up hostapd for interface $ifname" >&2 - # make sure this wifi interface won't accidentally stay open without encryption - ifconfig "$ifname" down - continue - } - fi - ;; - wds|sta) - if eval "type wpa_supplicant_setup_vif" 2>/dev/null >/dev/null; then - wpa_supplicant_setup_vif "$vif" realtek || { - echo "enable_realtek($device): Failed to set up wpa_supplicant for interface $ifname" >&2 - ifconfig "$ifname" down - continue - } - fi - ;; - esac - first=0 - done - -} - -check_realtek_device() { - [ ${1%[0-9]} = "wlan" ] && config_set "$1" phy "$1" - config_get phy "$1" phy - [ -z "$phy" ] && { - find_realtek_phy "$1" >/dev/null || return 0 - config_get phy "$1" phy - } - [ "$phy" = "$dev" ] && found=1 -} - -detect_realtek() { - devidx=0 - config_load wireless - while :; do - config_get type "wlan$devidx" type - [ -n "$type" ] || break - devidx=$(($devidx + 1)) - done - cd /sys/class/net/ - [ -d wlan[0-9] ] || return - for dev in $(ls -d wlan[0-9] 2>&-); do - found=0 - config_foreach check_realtek_device wifi-device - [ "$found" -gt 0 ] && continue - cat <<EOF -config wifi-device wlan$devidx - option type realtek - option channel 11 - option macaddr $(cat /sys/class/net/${dev}/address) - #TODO: enable after realtek merge with hostapd - #option hwmode 11ng - option htmode HT40- - - # UNCOMMENT THIS LINE TO DISABLE WIFI: - # option disabled 1 - -config wifi-iface - option device wlan$devidx - option network lan - option mode ap - option ssid OpenWrt - option encryption none - -EOF - devidx=$(($devidx + 1)) - done -} |