since the generic 2.6.24 support is gone, remove it for rb532 as well

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15444 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 0 insertions, 338 deletions

diff --git a/target/linux/rb532/files-2.6.24/arch/mips/rb500/devices.c b/target/linux/rb532/files-2.6.24/arch/mips/rb500/devices.c
deleted file mode 100644
index 6372737de..000000000
--- a/target/linux/rb532/files-2.6.24/arch/mips/rb500/devices.c
+++ /dev/null
@@ -1,338 +0,0 @@
-/*
- *  RouterBoard 500 Platform devices
- *
- *  Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
- *  Copyright (C) 2007 Florian Fainelli <florian@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- *  GNU General Public License for more details.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/ctype.h>
-#include <linux/string.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-
-#include <asm/bootinfo.h>
-
-#include <asm/rc32434/rc32434.h>
-#include <asm/rc32434/dma.h>
-#include <asm/rc32434/dma_v.h>
-#include <asm/rc32434/eth.h>
-#include <asm/rc32434/rb.h>
-
-#define ETH0_DMA_RX_IRQ   	GROUP1_IRQ_BASE + 0
-#define ETH0_DMA_TX_IRQ   	GROUP1_IRQ_BASE + 1
-#define ETH0_RX_OVR_IRQ   	GROUP3_IRQ_BASE + 9
-#define ETH0_TX_UND_IRQ   	GROUP3_IRQ_BASE + 10
-
-#define ETH0_RX_DMA_ADDR  (DMA0_PhysicalAddress + 0*DMA_CHAN_OFFSET)
-#define ETH0_TX_DMA_ADDR  (DMA0_PhysicalAddress + 1*DMA_CHAN_OFFSET)
-
-/* NAND definitions */
-#define MEM32(x) *((volatile unsigned *) (x))
-
-#define GPIO_RDY (1 << 0x08)
-#define GPIO_WPX (1 << 0x09)
-#define GPIO_ALE (1 << 0x0a)
-#define GPIO_CLE (1 << 0x0b)
-
-extern char* board_type;
-
-static struct resource korina_dev0_res[] = {
-	{
-		.name = "korina_regs",
-		.start = ETH0_PhysicalAddress,
-		.end = ETH0_PhysicalAddress + sizeof(ETH_t),
-		.flags = IORESOURCE_MEM,
-	 }, {
-		.name = "korina_rx",
-		.start = ETH0_DMA_RX_IRQ,
-		.end = ETH0_DMA_RX_IRQ,
-		.flags = IORESOURCE_IRQ
-	}, {
-		.name = "korina_tx",
-		.start = ETH0_DMA_TX_IRQ,
-		.end = ETH0_DMA_TX_IRQ,
-		.flags = IORESOURCE_IRQ
-	}, {
-		.name = "korina_ovr",
-		.start = ETH0_RX_OVR_IRQ,
-		.end = ETH0_RX_OVR_IRQ,
-		.flags = IORESOURCE_IRQ
-	}, {
-		.name = "korina_und",
-		.start = ETH0_TX_UND_IRQ,
-		.end = ETH0_TX_UND_IRQ,
-		.flags = IORESOURCE_IRQ
-	}, {
-		.name = "korina_dma_rx",
-		.start = ETH0_RX_DMA_ADDR,
-		.end = ETH0_RX_DMA_ADDR + DMA_CHAN_OFFSET - 1,
-		.flags = IORESOURCE_MEM,
-	 }, {
-		.name = "korina_dma_tx",
-		.start = ETH0_TX_DMA_ADDR,
-		.end = ETH0_TX_DMA_ADDR + DMA_CHAN_OFFSET - 1,
-		.flags = IORESOURCE_MEM,
-	 }
-};
-
-static struct korina_device korina_dev0_data = {
-	.name = "korina0",
-	.mac = {0xde, 0xca, 0xff, 0xc0, 0xff, 0xee}
-};
-
-static struct platform_device korina_dev0 = {
-	.id = 0,
-	.name = "korina",
-	.dev.platform_data = &korina_dev0_data,
-	.resource = korina_dev0_res,
-	.num_resources = ARRAY_SIZE(korina_dev0_res),
-};
-
-#define CF_GPIO_NUM 13
-
-static struct resource cf_slot0_res[] = {
-	{
-		.name = "cf_membase",
-		.flags = IORESOURCE_MEM
-	}, {
-		.name = "cf_irq",
-		.start = (8 + 4 * 32 + CF_GPIO_NUM),	/* 149 */
-		.end = (8 + 4 * 32 + CF_GPIO_NUM),
-		.flags = IORESOURCE_IRQ
-	}
-};
-
-static struct cf_device cf_slot0_data = {
-	.gpio_pin = 13
-};
-
-static struct platform_device cf_slot0 = {
-	.id = 0,
-	.name = "rb500-cf",
-	.dev.platform_data = &cf_slot0_data,
-	.resource = cf_slot0_res,
-	.num_resources = ARRAY_SIZE(cf_slot0_res),
-};
-
-/* Resources and device for NAND.  There is no data needed and no irqs, so just define the memory used. */
-
-/*
- * We need to use the OLD Yaffs-1 OOB layout, otherwise the RB bootloader
- * will not be able to find the kernel that we load.  So set the oobinfo
- * when creating the partitions
- */
-static struct nand_ecclayout rb500_nand_ecclayout = {
-	.eccbytes	= 6,
-	.eccpos		= { 8, 9, 10, 13, 14, 15 },
-	.oobavail	= 9,
-	.oobfree	= { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } }
-};
-
-int rb500_dev_ready(struct mtd_info *mtd)
-{
-        return MEM32(IDT434_REG_BASE + GPIOD) & GPIO_RDY;
-}
-
-void rb500_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
-{
-        struct nand_chip *chip = mtd->priv;
-        unsigned char orbits, nandbits;
-
-        if (ctrl & NAND_CTRL_CHANGE) {
-
-                orbits = (ctrl & NAND_CLE) << 1;
-                orbits |= (ctrl & NAND_ALE) >> 1;
-
-                nandbits = (~ctrl & NAND_CLE) << 1;
-                nandbits |= (~ctrl & NAND_ALE) >> 1;
-
-                changeLatchU5(orbits, nandbits);
-        }
-        if (cmd != NAND_CMD_NONE)
-                writeb(cmd, chip->IO_ADDR_W);
-}
-
-static struct resource nand_slot0_res[] = {
-	[0] = {
-		.name = "nand_membase",
-		.flags = IORESOURCE_MEM
-	}
-};
-
-struct platform_nand_data rb500_nand_data = {
-	.ctrl.dev_ready = rb500_dev_ready,
-	.ctrl.cmd_ctrl	= rb500_cmd_ctrl,
-};
-
-static struct platform_device nand_slot0 = {
-	.name = "gen_nand",
-	.id = -1,
-	.resource = nand_slot0_res,
-	.num_resources = ARRAY_SIZE(nand_slot0_res),
-	.dev.platform_data = &rb500_nand_data,
-};
-
-static struct mtd_partition rb500_partition_info[] = {
-	{
-		.name = "Routerboard NAND boot",
-		.offset = 0,
-		.size = 4 * 1024 * 1024,
-	}, {
-		.name = "rootfs",
-		.offset = MTDPART_OFS_NXTBLK,
-		.size = MTDPART_SIZ_FULL,
-	}
-};
-
-static struct platform_device rb500_led = {
-	.name = "rb500-led",
-	.id = 0,
-};
-
-static struct gpio_keys_button rb500_gpio_btn[] = {
-	{
-		.gpio = 1,
-		.code = BTN_0,
-		.desc = "S1",
-		.active_low = 1,
-	}
-};
-
-static struct gpio_keys_platform_data rb500_gpio_btn_data = {
-	.buttons = rb500_gpio_btn,
-	.nbuttons = ARRAY_SIZE(rb500_gpio_btn),
-};
-
-static struct platform_device rb500_button = {
-	.name 	= "gpio-keys",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &rb500_gpio_btn_data,
-	}
-};
-
-static struct platform_device *rb500_devs[] = {
-	&korina_dev0,
-	&nand_slot0,
-	&cf_slot0,
-	&rb500_led,
-	&rb500_button
-};
-
-static void __init parse_mac_addr(char *macstr)
-{
-	int i, j;
-	unsigned char result, value;
-
-	for (i = 0; i < 6; i++) {
-		result = 0;
-
-		if (i != 5 && *(macstr + 2) != ':')
-			return;
-
-		for (j = 0; j < 2; j++) {
-			if (isxdigit(*macstr)
-			    && (value =
-				isdigit(*macstr) ? *macstr -
-				'0' : toupper(*macstr) - 'A' + 10) < 16) {
-				result = result * 16 + value;
-				macstr++;
-			} else
-				return;
-		}
-
-		macstr++;
-		korina_dev0_data.mac[i] = result;
-	}
-}
-
-
-/* DEVICE CONTROLLER 1 */
-#define CFG_DC_DEV1 (void*)0xb8010010
-#define CFG_DC_DEV2 (void*)0xb8010020
-#define CFG_DC_DEVBASE    0x0
-#define CFG_DC_DEVMASK    0x4
-#define CFG_DC_DEVC       0x8
-#define CFG_DC_DEVTC      0xC
-
-/* NAND definitions */
-#define NAND_CHIP_DELAY	25
-
-static int rb500_nand_fixup(struct mtd_info *mtd)
-{
-	struct nand_chip *chip = mtd->priv;
-
-	if (mtd->writesize == 512)
-		chip->ecc.layout = &rb500_nand_ecclayout;
-
-	return 0;
-}
-
-static void __init rb500_nand_setup(void)
-{
-	switch (mips_machtype) {
-	case MACH_MIKROTIK_RB532A:
-		changeLatchU5(LO_FOFF | LO_CEX, LO_ULED | LO_ALE | LO_CLE | LO_WPX);
-		break;
-	default:
-		changeLatchU5(LO_WPX | LO_FOFF | LO_CEX, LO_ULED | LO_ALE | LO_CLE);
-		break;
-	}
-
-	/* Setup NAND specific settings */
-	rb500_nand_data.chip.nr_chips = 1;
-	rb500_nand_data.chip.nr_partitions = ARRAY_SIZE(rb500_partition_info);
-	rb500_nand_data.chip.partitions = rb500_partition_info;
-	rb500_nand_data.chip.chip_delay = NAND_CHIP_DELAY;
-	rb500_nand_data.chip.options = NAND_NO_AUTOINCR;
-
-	rb500_nand_data.chip.chip_fixup = &rb500_nand_fixup;
-}
-
-
-static int __init plat_setup_devices(void)
-{
-	/* Look for the CF card reader */
-	if (!readl(CFG_DC_DEV1 + CFG_DC_DEVMASK))
-		rb500_devs[1] = NULL;
-	else {
-		cf_slot0_res[0].start =
-		    readl(CFG_DC_DEV1 + CFG_DC_DEVBASE);
-		cf_slot0_res[0].end = cf_slot0_res[0].start + 0x1000;
-	}
-
-	/* Read the NAND resources from the device controller */
-	nand_slot0_res[0].start = readl(CFG_DC_DEV2 + CFG_DC_DEVBASE);
-	nand_slot0_res[0].end = nand_slot0_res[0].start + 0x1000;
-
-	/* Initialise the NAND device */
-	rb500_nand_setup();
-
-	return platform_add_devices(rb500_devs, ARRAY_SIZE(rb500_devs));
-}
-
-static int __init setup_kmac(char *s)
-{
-	printk("korina mac = %s\n", s);
-	parse_mac_addr(s);
-	return 0;
-}
-
-__setup("kmac=", setup_kmac);
-
-arch_initcall(plat_setup_devices);