ramips: remove 2.6.36 stuff

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26329 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 0 insertions, 82 deletions

diff --git a/target/linux/ramips/patches-2.6.36/101-rt288x_serial_driver_hack.patch b/target/linux/ramips/patches-2.6.36/101-rt288x_serial_driver_hack.patch
deleted file mode 100644
index 5dade065d..000000000
--- a/target/linux/ramips/patches-2.6.36/101-rt288x_serial_driver_hack.patch
+++ /dev/null
@@ -1,82 +0,0 @@
---- a/drivers/serial/8250.c
-+++ b/drivers/serial/8250.c
-@@ -309,9 +309,9 @@ static const struct serial8250_config ua
- 	},
- };
- 
--#if defined(CONFIG_MIPS_ALCHEMY)
-+#if defined(CONFIG_MIPS_ALCHEMY) || defined (CONFIG_SERIAL_8250_RT288X)
- 
--/* Au1x00 UART hardware has a weird register layout */
-+/* Au1x00 and RT288x UART hardware has a weird register layout */
- static const u8 au_io_in_map[] = {
- 	[UART_RX]  = 0,
- 	[UART_IER] = 2,
-@@ -575,8 +575,8 @@ static inline void _serial_dl_write(stru
- 	serial_outp(up, UART_DLM, value >> 8 & 0xff);
- }
- 
--#if defined(CONFIG_MIPS_ALCHEMY)
--/* Au1x00 haven't got a standard divisor latch */
-+#if defined(CONFIG_MIPS_ALCHEMY) || defined (CONFIG_SERIAL_8250_RT288X)
-+/* Au1x00 and RT288x haven't got a standard divisor latch */
- static int serial_dl_read(struct uart_8250_port *up)
- {
- 	if (up->port.iotype == UPIO_AU)
-@@ -783,22 +783,19 @@ static int size_fifo(struct uart_8250_po
-  */
- static unsigned int autoconfig_read_divisor_id(struct uart_8250_port *p)
- {
--	unsigned char old_dll, old_dlm, old_lcr;
-+	unsigned char old_lcr;
-+	unsigned int old_dl;
- 	unsigned int id;
- 
- 	old_lcr = serial_inp(p, UART_LCR);
- 	serial_outp(p, UART_LCR, UART_LCR_DLAB);
- 
--	old_dll = serial_inp(p, UART_DLL);
--	old_dlm = serial_inp(p, UART_DLM);
-+	old_dl = serial_dl_read(p);
- 
--	serial_outp(p, UART_DLL, 0);
--	serial_outp(p, UART_DLM, 0);
-+	serial_dl_write(p, 0);
-+	id = serial_dl_read(p);
- 
--	id = serial_inp(p, UART_DLL) | serial_inp(p, UART_DLM) << 8;
--
--	serial_outp(p, UART_DLL, old_dll);
--	serial_outp(p, UART_DLM, old_dlm);
-+	serial_dl_write(p, old_dl);
- 	serial_outp(p, UART_LCR, old_lcr);
- 
- 	return id;
---- a/drivers/serial/Kconfig
-+++ b/drivers/serial/Kconfig
-@@ -258,6 +258,14 @@ config SERIAL_8250_ACORN
- 	  system, say Y to this option.  The driver can handle 1, 2, or 3 port
- 	  cards.  If unsure, say N.
- 
-+config SERIAL_8250_RT288X
-+	bool "Ralink RT288x/RT305x serial port support"
-+	depends on SERIAL_8250 != n && (SOC_RT288X || SOC_RT305X)
-+	help
-+	  If you have a Ralink RT288x/RT305x SoC based board and want to use the
-+	  serial port, say Y to this option. The driver can handle up to 2 serial
-+	  ports. If unsure, say N.
-+
- config SERIAL_8250_RM9K
- 	bool "Support for MIPS RM9xxx integrated serial port"
- 	depends on SERIAL_8250 != n && SERIAL_RM9000
---- a/include/linux/serial_core.h
-+++ b/include/linux/serial_core.h
-@@ -302,7 +302,7 @@ struct uart_port {
- #define UPIO_HUB6		(1)
- #define UPIO_MEM		(2)
- #define UPIO_MEM32		(3)
--#define UPIO_AU			(4)			/* Au1x00 type IO */
-+#define UPIO_AU			(4)			/* Au1x00 and RT288x type IO */
- #define UPIO_TSI		(5)			/* Tsi108/109 type IO */
- #define UPIO_DWAPB		(6)			/* DesignWare APB UART */
- #define UPIO_RM9000		(7)			/* RM9000 type IO */