diff options
| author | juhosg <juhosg@3c298f89-4303-0410-b956-a3cf2f4a3e73> | 2012-05-02 19:17:59 +0000 |
|---|---|---|
| committer | juhosg <juhosg@3c298f89-4303-0410-b956-a3cf2f4a3e73> | 2012-05-02 19:17:59 +0000 |
| commit | 439a47e38060259a10181bfe94dab65e3f56cf6f (patch) | |
| tree | a888cb44f72cd81a5bd8e63e9045c70ce20940c4 /target/linux/ramips/files | |
| parent | 1f249922ced380169a25dba0750f31e4388cd5e3 (diff) | |
ramips: W306R V2.0 - GPIO and Network fixes
Fixed: GPIO typos and confirmed GPIO_BUTTON_RESET
Fixed: Lan & Wan reversed: swaped "eth0.2" with "eth0.1" by
removing a line(default is correct), and reversed the
Lan/wan layout LLLLW to WLLLL.
Added: image/Makefile now builds -factory.bin files. I am
unsure of the accepted way to change the makefile but
the name of the image needs to be 'linkn Kernel Image'
in order to be accepted by the OEM firmware.
Known issue: eth0 (internal switch i think has mac address:
00:11:22:33:44:55 but i think it should be same as
the lan).
Known issue: Pressing the reset button has no noticable effect,
i would expect the router to boot failsafe if being
pressed on boot, reboot if short press and reset all
to default if long press.
[juhosg: remove mtdlayout_W306R and use mtdlayout_4M instead]
Signed-off-by: David Pearce <david_18051985@hotmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31557 3c298f89-4303-0410-b956-a3cf2f4a3e73
Diffstat (limited to 'target/linux/ramips/files')
| -rw-r--r-- | target/linux/ramips/files/arch/mips/ralink/rt305x/mach-w306r-v20.c | 4 |
1 files changed, 2 insertions, 2 deletions
diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-w306r-v20.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-w306r-v20.c index 6235a7329..7c8eb867c 100644 --- a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-w306r-v20.c +++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-w306r-v20.c @@ -20,7 +20,7 @@ #include "devices.h" -#define W306R_V20_GPIO_LED_SYS 9 /* FIXME */ +#define W306R_V20_GPIO_LED_SYS 9 #define W306R_V20_GPIO_LED_WPS 13 #define W306R_V20_GPIO_BUTTON_RESET 10 @@ -57,7 +57,7 @@ static void __init w306r_v20_init(void) rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT); - rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW; + rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_WLLLL; rt305x_register_ethernet(); ramips_register_gpio_leds(-1, ARRAY_SIZE(w306r_v20_leds_gpio), w306r_v20_leds_gpio); |