ramips: initial support for Sitecom WL-351 v1 002

This add support for the Sitecom WL-351 v1 002.
In principle the Engenius ESR9850 should also work with this, but I
don't have the hardware to test it.

Since an external gigabit switch (RTL8366RB) is used,
I had to modify the ramips_esw driver to add a 'bypass' mode, which
just configures it to not filter the vlan tags.
Also two initialization words (FCT2 and FPA2) are set to different
values by u-boot than what the driver is using and it only seems to
work correctly when they not overridden by the driver, so I
added them to the platform specific data as reg_initval_fct2 and
reg_initval_fpa2.

With this wired lan works as expected, however I'm still having some
trouble with the wireless lan:
It only works after I rmmod & re-insmod rt2800pci and then
reconfigure it in the webinterface, but not directly after
rebooting.

The symptom of this is wpad saying:
Dec 20 15:45:09 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> IEEE 802.11: associated (aid 1)
Dec 20 15:45:09 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> WPA: pairwise key handshake completed (RSN)
Dec 20 15:45:22 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> IEEE 802.11: authenticated

But wpa_supplicant on the client saying:
Authentication with <wl351mac> timed out.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29604 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 156 insertions, 0 deletions

diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-wl351.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-wl351.c
new file mode 100644
index 000000000..3ebc7fee8
--- /dev/null
+++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-wl351.c
@@ -0,0 +1,156 @@
+/*
+ *  Sitecom WL-351 v1 002 board support
+ *
+ *  Copyright (C) 2011 Tobias Diedrich <ranma+openwrt@tdiedrich.de>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+
+#include <linux/rtl8366.h>
+
+#include <asm/mach-ralink/machine.h>
+#include <asm/mach-ralink/dev-gpio-buttons.h>
+#include <asm/mach-ralink/dev-gpio-leds.h>
+#include <asm/mach-ralink/rt305x.h>
+#include <asm/mach-ralink/rt305x_regs.h>
+
+#include "devices.h"
+
+#define WL351_GPIO_LED_POWER_AMBER		8
+#define WL351_GPIO_LED_UNPOPULATED_AMBER	12
+#define WL351_GPIO_LED_UNPOPULATED_BLUE		13
+
+#define WL351_GPIO_BUTTON_RESET	10
+#define WL351_GPIO_BUTTON_WPS	0
+
+#define WL351_BUTTONS_POLL_INTERVAL	20
+
+
+static struct gpio_led wl351_leds_gpio[] __initdata = {
+	{
+		.name		= "wl-351:amber:power",
+		.gpio		= WL351_GPIO_LED_POWER_AMBER,
+		.active_low	= 1,
+	}, {
+		.name		= "wl-351:amber:unpopulated",
+		.gpio		= WL351_GPIO_LED_UNPOPULATED_AMBER,
+		.active_low	= 1,
+	}, {
+		.name		= "wl-351:blue:unpopulated",
+		.gpio		= WL351_GPIO_LED_UNPOPULATED_BLUE,
+		.active_low	= 1,
+	}
+};
+
+
+static struct gpio_button wl351_gpio_buttons[] __initdata = {
+	{
+		.desc		= "reset",
+		.type		= EV_KEY,
+		.code		= KEY_RESTART,
+		.threshold	= 3,
+		.gpio		= WL351_GPIO_BUTTON_RESET,
+		.active_low	= 1,
+	}, {
+		.desc		= "wps",
+		.type		= EV_KEY,
+		.code		= KEY_WPS_BUTTON,
+		.threshold	= 3,
+		.gpio		= WL351_GPIO_BUTTON_WPS,
+		.active_low	= 1,
+	}
+};
+
+
+#ifdef CONFIG_MTD_PARTITIONS
+static struct mtd_partition wl351_partitions[] = {
+	{
+		.name	= "u-boot",
+		.offset	= 0,
+		.size	= 0x030000,
+		.mask_flags = MTD_WRITEABLE,
+	}, {
+		.name	= "u-boot-env",
+		.offset	= 0x030000,
+		.size	= 0x010000,
+		.mask_flags = MTD_WRITEABLE,
+	}, {
+		.name	= "factory",
+		.offset	= 0x040000,
+		.size	= 0x010000,
+		.mask_flags = MTD_WRITEABLE,
+	}, {
+		.name	= "kernel",
+		.offset	= 0x050000,
+		.size	= 0x110000,
+	}, {
+		.name	= "rootfs",
+		.offset	= 0x160000,
+		.size	= 0x230000,
+	}, {
+		.name	= "user (jffs2)",
+		.offset	= 0x3F0000,
+		.size	= 0x010000,
+	}, {
+		.name	= "firmware",
+		.offset	= 0x050000,
+		.size	= 0x3a0000,
+	}
+};
+#endif /* CONFIG_MTD_PARTITIONS */
+
+static struct physmap_flash_data wl351_flash_data = {
+#ifdef CONFIG_MTD_PARTITIONS
+	.nr_parts	= ARRAY_SIZE(wl351_partitions),
+	.parts		= wl351_partitions,
+#endif
+};
+
+
+static struct rtl8366_platform_data wl351_switch_data = {
+	.gpio_sda	= RT305X_GPIO_I2C_SD,
+	.gpio_sck	= RT305X_GPIO_I2C_SCLK,
+};
+
+static struct platform_device wl351_switch = {
+	.name		= RTL8366RB_DRIVER_NAME,
+	.id		= -1,
+	.dev		= {
+		.platform_data = &wl351_switch_data,
+	}
+};
+
+static void __init wl351_init(void)
+{
+	rt305x_gpio_init((RT305X_GPIO_MODE_GPIO <<
+				RT305X_GPIO_MODE_UART0_SHIFT) |
+				RT305X_GPIO_MODE_I2C |
+				RT305X_GPIO_MODE_SPI |
+				RT305X_GPIO_MODE_MDIO);
+	rt305x_register_flash(0, &wl351_flash_data);
+	ramips_register_gpio_leds(-1, ARRAY_SIZE(wl351_leds_gpio),
+						wl351_leds_gpio);
+	ramips_register_gpio_buttons(-1, WL351_BUTTONS_POLL_INTERVAL,
+				     ARRAY_SIZE(wl351_gpio_buttons),
+				     wl351_gpio_buttons);
+	// external rtl8366rb
+	rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_BYPASS;
+	rt305x_esw_data.reg_initval_fct2 = 0x0002500c;
+	rt305x_esw_data.reg_initval_fpa2 = 0x1f003fff;
+	rt305x_register_ethernet();
+	platform_device_register(&wl351_switch);
+	rt305x_register_wifi();
+	rt305x_register_wdt();
+	rt305x_register_usb();
+}
+
+MIPS_MACHINE(RAMIPS_MACH_WL351, "WL-351", "Sitecom WL-351 v1 002",
+	     wl351_init);