allow building of kernel-specific stuff in package/ instead of target/linux/package/ and merge target/linux/package/base-files into package/base-files

git-svn-id: svn://svn.openwrt.org/openwrt/branches/buildroot-ng/openwrt@3855 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 0 insertions, 108 deletions

diff --git a/target/linux/package/base-files/files/brcm-2.4/etc/init.d/S05netconfig b/target/linux/package/base-files/files/brcm-2.4/etc/init.d/S05netconfig
deleted file mode 100755
index 6a626f54a..000000000
--- a/target/linux/package/base-files/files/brcm-2.4/etc/init.d/S05netconfig
+++ /dev/null
@@ -1,108 +0,0 @@
-#!/bin/sh
-[ -e /etc/config/network ] && exit 0
-
-mkdir -p /etc/config
-
-(
-	if grep 'mtd0: 00060000' /proc/mtd 2>&- >&-; then
-		# WGT634u
-		echo boardtype=wgt634u
-	else
-		strings /dev/mtdblock/3
-	fi
-) | awk '
-function p(name) {
-	if (c[name] != "") print name "=\"" c[name] "\""
-}
-
-BEGIN {
-	FS="="
-	c["lan_ifname"]="br0"
-	c["lan_ifnames"]="vlan0 eth1"
-	c["wan_proto"]="none"
-	c["wan_ifname"]="vlan1"
-	c["vlan0ports"]="1 2 3 4 5*"
-	c["vlan1ports"]="0 5"
-}
-
-($1 == "boardnum") || ($1 == "boardtype") || ($1 == "boardflags") {
-	nvram[$1] = $2
-}
-
-END {
-	# v1 hardware
-	if (nvram["boardtype"] == "bcm94710dev") {
-		# Linksys WRT54G v1.x
-		if (nvram["boardnum"] == "42") {
-			c["vlan0ports"]=""
-			c["vlan1ports"]=""
-			c["lan_ifnames"]="vlan2 eth2"
-		}
-
-		# Asus WL-500g
-		if (nvram["boardnum"] == "asusX") {
-			c["lan_ifnames"]="eth0 eth1 eth2" # FIXME
-			# wan_ifname=eth1
-		}
-	}
-	if (nvram["boardtype"] == "wgt634u") {
-		c["vlan0ports"] = "0 1 2 3 5*"
-		c["vlan1ports"] = "4 5"
-		c["lan_ifnames"] = "vlan0 ath0"
-	}
-	if ((nvram["boardtype"] == "0x0467") || (nvram["boardtype"] == "0x042f")) {
-		c["vlan0ports"] = "0 1 2 3 5*"
-		c["vlan1ports"] = "4 5"
-	}
-
-	# WAP54G
-	if ((nvram["boardnum"] == "2") || \
-		(nvram["boardnum"] == "1024")) {
-		c["lan_ifnames"]="eth0 eth1"
-		c["wan_ifname"]=""
-	}
-
-	print "#### VLAN configuration "
-	print "vlan0hwname=et0"
-	print "vlan1hwname=et0"
-	p("vlan0ports")
-	p("vlan1ports")
-	print ""
-	print ""
-	
-	print "#### LAN configuration"
-	print "lan_proto=\"static\""
-	p("lan_ifname")
-	p("lan_ifnames")
-	print "lan_ipaddr=\"192.168.1.1\""
-	print "lan_netmask=\"255.255.255.0\""
-	print "# lan_dns=\"192.168.1.1\""
-	print "# lan_gateway=\"192.168.1.1\""
-
-	print ""
-	print ""
-
-	print "#### WAN configuration"
-	print "# wan_proto: WAN protocol, available protocols:"
-	print "#   none: disable"
-	print "#   dhcp: DHCP"
-	print "#   static: Static IP"
-	print "#   pppoe: PPP over Ethernet"
-	print "#   pptp: Point-to-Point tunneling Protocol"
-	print "#     for pppoe and pptp you need to use wan_ifname=\"ppp0\""
-	print ""
-	print "wan_proto=dhcp"
-	p("wan_ifname")
-	print "wan_device=\"" c["wan_ifname"] "\""
-	print "# wan_ipaddr=\"192.168.0.2\""
-	print "# wan_netmask=\"255.255.255.0\""
-	print "# wan_gateway=\"192.168.0.1\""
-	print "# wan_dns=\"192.168.0.1\""
-	print ""
-	print "## PPP over Ethernet and PPTP"
-	print "# wan_ifname=\"ppp0\""
-	print "# ppp_username=\"my_username\""
-	print "# ppp_passwd=\"my_password\""
-	print "# pptp_server_ip=\"192.168.0.1\""
-}
-' > /etc/config/network