[lantiq] bump kernel to 3.2.12

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31060 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 0 insertions, 253 deletions

diff --git a/target/linux/lantiq/patches/0016-MIPS-lantiq-adds-xway-nand-driver.patch b/target/linux/lantiq/patches/0016-MIPS-lantiq-adds-xway-nand-driver.patch
deleted file mode 100644
index b7ad78905..000000000
--- a/target/linux/lantiq/patches/0016-MIPS-lantiq-adds-xway-nand-driver.patch
+++ /dev/null
@@ -1,253 +0,0 @@
-From e2d5b4ba92289cb0fcc9db741d159ef5eb852d9f Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sat, 27 Aug 2011 20:08:14 +0200
-Subject: [PATCH 16/24] MIPS: lantiq: adds xway nand driver
-
-This patch adds a nand driver for XWAY SoCs. The patch makes use of the
-plat_nand driver. As with the EBU NOR driver merged in 3.0, we have the
-endianess swap problem on read. To workaround this problem we make the
-read_byte() callback available via the plat_nand driver causing the nand
-layer to do byte reads.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
-
-TODO : memory ranges
-       cs lines
-       plat dev
-       ebu2 and not ebu1 ?
----
- .../mips/include/asm/mach-lantiq/xway/lantiq_soc.h |    2 +
- arch/mips/lantiq/xway/Makefile                     |    2 +-
- arch/mips/lantiq/xway/nand.c                       |  185 ++++++++++++++++++++
- drivers/mtd/nand/plat_nand.c                       |    1 +
- include/linux/mtd/nand.h                           |    1 +
- 5 files changed, 190 insertions(+), 1 deletions(-)
- create mode 100644 arch/mips/lantiq/xway/nand.c
-
---- a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
-+++ b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
-@@ -138,6 +138,8 @@
- /* register access macros for EBU and CGU */
- #define ltq_ebu_w32(x, y)	ltq_w32((x), ltq_ebu_membase + (y))
- #define ltq_ebu_r32(x)		ltq_r32(ltq_ebu_membase + (x))
-+#define ltq_ebu_w32_mask(x, y, z) \
-+	ltq_w32_mask(x, y, ltq_ebu_membase + (z))
- #define ltq_cgu_w32(x, y)	ltq_w32((x), ltq_cgu_membase + (y))
- #define ltq_cgu_r32(x)		ltq_r32(ltq_cgu_membase + (x))
- 
---- a/arch/mips/lantiq/xway/Makefile
-+++ b/arch/mips/lantiq/xway/Makefile
-@@ -1,4 +1,4 @@
--obj-y := sysctrl.o reset.o gpio.o gpio_stp.o gpio_ebu.o devices.o dma.o
-+obj-y := sysctrl.o reset.o gpio.o gpio_stp.o gpio_ebu.o devices.o dma.o nand.o
- 
- obj-$(CONFIG_SOC_XWAY) += clk-xway.o prom-xway.o
- obj-$(CONFIG_SOC_AMAZON_SE) += clk-ase.o prom-ase.o
---- /dev/null
-+++ b/arch/mips/lantiq/xway/nand.c
-@@ -0,0 +1,185 @@
-+/*
-+ *  This program is free software; you can redistribute it and/or modify it
-+ *  under the terms of the GNU General Public License version 2 as published
-+ *  by the Free Software Foundation.
-+ *
-+ *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
-+ */
-+
-+#include <linux/mtd/physmap.h>
-+#include <linux/mtd/nand.h>
-+#include <linux/platform_device.h>
-+
-+#include <lantiq_soc.h>
-+#include <lantiq_irq.h>
-+#include <lantiq_platform.h>
-+
-+#include "devices.h"
-+
-+/* nand registers */
-+#define LTQ_EBU_NAND_WAIT       0xB4
-+#define LTQ_EBU_NAND_ECC0       0xB8
-+#define LTQ_EBU_NAND_ECC_AC     0xBC
-+#define LTQ_EBU_NAND_CON        0xB0
-+#define LTQ_EBU_ADDSEL1         0x24
-+
-+/* gpio definitions */
-+#define PIN_ALE    13
-+#define PIN_CLE    24
-+#define PIN_CS1    23
-+#define PIN_RDY    48  /* NFLASH_READY */
-+#define PIN_RD     49  /* NFLASH_READ_N */
-+
-+#define NAND_CMD_ALE            (1 << 2)
-+#define NAND_CMD_CLE            (1 << 3)
-+#define NAND_CMD_CS             (1 << 4)
-+#define NAND_WRITE_CMD_RESET    0xff
-+#define NAND_WRITE_CMD          (NAND_CMD_CS | NAND_CMD_CLE)
-+#define NAND_WRITE_ADDR         (NAND_CMD_CS | NAND_CMD_ALE)
-+#define NAND_WRITE_DATA         (NAND_CMD_CS)
-+#define NAND_READ_DATA          (NAND_CMD_CS)
-+#define NAND_WAIT_WR_C          (1 << 3)
-+#define NAND_WAIT_RD            (0x1)
-+
-+#define ADDSEL1_MASK(x)         (x << 4)
-+#define ADDSEL1_REGEN           1
-+#define BUSCON1_SETUP           (1 << 22)
-+#define BUSCON1_BCGEN_RES       (0x3 << 12)
-+#define BUSCON1_WAITWRC2        (2 << 8)
-+#define BUSCON1_WAITRDC2        (2 << 6)
-+#define BUSCON1_HOLDC1          (1 << 4)
-+#define BUSCON1_RECOVC1         (1 << 2)
-+#define BUSCON1_CMULT4          1
-+#define NAND_CON_NANDM          1
-+#define NAND_CON_CSMUX          (1 << 1)
-+#define NAND_CON_CS_P           (1 << 4)
-+#define NAND_CON_SE_P           (1 << 5)
-+#define NAND_CON_WP_P           (1 << 6)
-+#define NAND_CON_PRE_P          (1 << 7)
-+#define NAND_CON_IN_CS0         0
-+#define NAND_CON_OUT_CS0        0
-+#define NAND_CON_IN_CS1         (1 << 8)
-+#define NAND_CON_OUT_CS1        (1 << 10)
-+#define NAND_CON_CE             (1 << 20)
-+
-+#define NAND_BASE_ADDRESS       (KSEG1 | 0x14000000)
-+
-+static const char *part_probes[] = { "cmdlinepart", NULL };
-+
-+static void
-+xway_select_chip(struct mtd_info *mtd, int chip)
-+{
-+	switch (chip) {
-+	case -1:
-+		ltq_ebu_w32_mask(NAND_CON_CE, 0, LTQ_EBU_NAND_CON);
-+		ltq_ebu_w32_mask(NAND_CON_NANDM, 0, LTQ_EBU_NAND_CON);
-+		break;
-+	case 0:
-+		ltq_ebu_w32_mask(0, NAND_CON_NANDM, LTQ_EBU_NAND_CON);
-+		ltq_ebu_w32_mask(0, NAND_CON_CE, LTQ_EBU_NAND_CON);
-+		/* reset the nand chip */
-+		while((ltq_ebu_r32(LTQ_EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0);
-+		ltq_w32(NAND_WRITE_CMD_RESET, ((u32*)(NAND_BASE_ADDRESS | NAND_WRITE_CMD)));
-+		break;
-+	default:
-+		BUG();
-+	}
-+}
-+
-+static void
-+xway_cmd_ctrl(struct mtd_info *mtd, int data, unsigned int ctrl)
-+{
-+	struct nand_chip *this = mtd->priv;
-+
-+	if (ctrl & NAND_CTRL_CHANGE) {
-+		if(ctrl & NAND_CLE)
-+			this->IO_ADDR_W = (void __iomem *)(NAND_BASE_ADDRESS | NAND_WRITE_CMD);
-+		else if(ctrl & NAND_ALE)
-+			this->IO_ADDR_W = (void __iomem *)(NAND_BASE_ADDRESS | NAND_WRITE_ADDR);
-+	}
-+
-+	if(data != NAND_CMD_NONE) {
-+		*(volatile u8*)((u32)this->IO_ADDR_W) = data;
-+		while((ltq_ebu_r32(LTQ_EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0);
-+	}
-+}
-+
-+static int
-+xway_dev_ready(struct mtd_info *mtd)
-+{
-+	return ltq_ebu_r32(LTQ_EBU_NAND_WAIT) & NAND_WAIT_RD;
-+}
-+
-+void
-+nand_write(unsigned int addr, unsigned int val)
-+{
-+	ltq_w32(val, ((u32*)(NAND_BASE_ADDRESS | addr)));
-+	while((ltq_ebu_r32(LTQ_EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0);
-+}
-+
-+unsigned char
-+ltq_nand_read_byte(struct mtd_info *mtd)
-+{
-+	return ltq_r8((void __iomem *)(NAND_BASE_ADDRESS | (NAND_READ_DATA)));
-+}
-+
-+int xway_nand_probe(struct platform_device *pdev)
-+{
-+//	ltq_gpio_request(PIN_CS1, 1, 0, 1, "NAND_CS1");
-+	ltq_gpio_request(PIN_CLE, 1, 0, 1, "NAND_CLE");
-+	ltq_gpio_request(PIN_ALE, 1, 0, 1, "NAND_ALE");
-+	if (ltq_is_ar9() || ltq_is_vr9()) {
-+		ltq_gpio_request(PIN_RDY, 1, 0, 0, "NAND_BSY");
-+		ltq_gpio_request(PIN_RD, 1, 0, 1, "NAND_RD");
-+	}
-+
-+	ltq_ebu_w32((NAND_BASE_ADDRESS & 0x1fffff00)
-+		| ADDSEL1_MASK(3) | ADDSEL1_REGEN, LTQ_EBU_ADDSEL1);
-+
-+	ltq_ebu_w32(BUSCON1_SETUP | BUSCON1_BCGEN_RES | BUSCON1_WAITWRC2
-+		| BUSCON1_WAITRDC2 | BUSCON1_HOLDC1 | BUSCON1_RECOVC1
-+		| BUSCON1_CMULT4, LTQ_EBU_BUSCON1);
-+
-+	ltq_ebu_w32(NAND_CON_NANDM | NAND_CON_CSMUX | NAND_CON_CS_P
-+		| NAND_CON_SE_P | NAND_CON_WP_P | NAND_CON_PRE_P
-+		| NAND_CON_IN_CS0 | NAND_CON_OUT_CS0, LTQ_EBU_NAND_CON);
-+
-+	ltq_w32(NAND_WRITE_CMD_RESET, ((u32*)(NAND_BASE_ADDRESS | NAND_WRITE_CMD)));
-+	while((ltq_ebu_r32(LTQ_EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0);
-+
-+	return 0;
-+}
-+
-+static struct platform_nand_data falcon_flash_nand_data = {
-+	.chip = {
-+		.nr_chips		= 1,
-+		.chip_delay		= 30,
-+		.part_probe_types	= part_probes,
-+	},
-+	.ctrl = {
-+		.probe		= xway_nand_probe,
-+		.cmd_ctrl	= xway_cmd_ctrl,
-+		.dev_ready	= xway_dev_ready,
-+		.select_chip	= xway_select_chip,
-+		.read_byte = ltq_nand_read_byte,
-+	}
-+};
-+
-+static struct resource ltq_nand_res =
-+	MEM_RES("nand", 0x14000000, 0x3ffffff);
-+
-+static struct platform_device ltq_flash_nand = {
-+	.name		= "gen_nand",
-+	.id		= -1,
-+	.num_resources	= 1,
-+	.resource	= &ltq_nand_res,
-+	.dev		= {
-+		.platform_data = &falcon_flash_nand_data,
-+	},
-+};
-+
-+void __init
-+xway_register_nand(void)
-+{
-+	platform_device_register(&ltq_flash_nand);
-+}
---- a/drivers/mtd/nand/plat_nand.c
-+++ b/drivers/mtd/nand/plat_nand.c
-@@ -77,6 +77,7 @@ static int __devinit plat_nand_probe(str
- 	data->chip.select_chip = pdata->ctrl.select_chip;
- 	data->chip.write_buf = pdata->ctrl.write_buf;
- 	data->chip.read_buf = pdata->ctrl.read_buf;
-+	data->chip.read_byte = pdata->ctrl.read_byte;
- 	data->chip.chip_delay = pdata->chip.chip_delay;
- 	data->chip.options |= pdata->chip.options;
- 
---- a/include/linux/mtd/nand.h
-+++ b/include/linux/mtd/nand.h
-@@ -657,6 +657,7 @@ struct platform_nand_ctrl {
- 	void (*cmd_ctrl)(struct mtd_info *mtd, int dat, unsigned int ctrl);
- 	void (*write_buf)(struct mtd_info *mtd, const uint8_t *buf, int len);
- 	void (*read_buf)(struct mtd_info *mtd, uint8_t *buf, int len);
-+	unsigned char (*read_byte)(struct mtd_info *mtd);
- 	void *priv;
- };
-