summaryrefslogtreecommitdiffstats
path: root/target/linux/ixp4xx
diff options
context:
space:
mode:
authoracoul <acoul@3c298f89-4303-0410-b956-a3cf2f4a3e73>2010-06-24 14:25:07 +0000
committeracoul <acoul@3c298f89-4303-0410-b956-a3cf2f4a3e73>2010-06-24 14:25:07 +0000
commit103e2408d6f762ec68d2a8a6d523b47520bc0c46 (patch)
treecb7a4c8b896351c2dfd42b04ef98847d6b3d2aa5 /target/linux/ixp4xx
parentc162408f5870ffde244e76685080e8d9d22b1949 (diff)
ixp4xx: revert kernel support for 2.6.33 & 2.6.35
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21890 3c298f89-4303-0410-b956-a3cf2f4a3e73
Diffstat (limited to 'target/linux/ixp4xx')
-rw-r--r--target/linux/ixp4xx/config-2.6.33166
-rw-r--r--target/linux/ixp4xx/config-2.6.35203
-rw-r--r--target/linux/ixp4xx/patches-2.6.33/020-gateworks_i2c_pld.patch421
-rw-r--r--target/linux/ixp4xx/patches-2.6.33/050-disable_dmabounce.patch164
-rw-r--r--target/linux/ixp4xx/patches-2.6.33/090-increase_entropy_pools.patch15
-rw-r--r--target/linux/ixp4xx/patches-2.6.33/100-wg302v2_gateway7001_mac_plat_info.patch68
-rw-r--r--target/linux/ixp4xx/patches-2.6.33/105-wg302v1_support.patch257
-rw-r--r--target/linux/ixp4xx/patches-2.6.33/110-pronghorn_series_support.patch387
-rw-r--r--target/linux/ixp4xx/patches-2.6.33/111-pronghorn_swap_uarts.patch44
-rw-r--r--target/linux/ixp4xx/patches-2.6.33/115-sidewinder_support.patch282
-rw-r--r--target/linux/ixp4xx/patches-2.6.33/116-sidewinder_fis_location.patch30
-rw-r--r--target/linux/ixp4xx/patches-2.6.33/120-compex_support.patch212
-rw-r--r--target/linux/ixp4xx/patches-2.6.33/130-wrt300nv2_support.patch225
-rw-r--r--target/linux/ixp4xx/patches-2.6.33/131-wrt300nv2_mac_plat_info.patch40
-rw-r--r--target/linux/ixp4xx/patches-2.6.33/132-wrt300nv2_mac_fix.patch71
-rw-r--r--target/linux/ixp4xx/patches-2.6.33/150-lanready_ap1000_support.patch200
-rw-r--r--target/linux/ixp4xx/patches-2.6.33/151-lanready_ap1000_mac_plat_info.patch41
-rw-r--r--target/linux/ixp4xx/patches-2.6.33/162-wg302v1_mem_fixup.patch47
-rw-r--r--target/linux/ixp4xx/patches-2.6.33/170-ixdpg425_mac_plat_info.patch41
-rw-r--r--target/linux/ixp4xx/patches-2.6.33/180-tw5334_support.patch284
-rw-r--r--target/linux/ixp4xx/patches-2.6.33/185-mi424wr_support.patch465
-rw-r--r--target/linux/ixp4xx/patches-2.6.33/190-cambria_support.patch553
-rw-r--r--target/linux/ixp4xx/patches-2.6.33/191-cambria_optional_uart.patch217
-rw-r--r--target/linux/ixp4xx/patches-2.6.33/192-cambria_gpio_device.patch46
-rw-r--r--target/linux/ixp4xx/patches-2.6.33/193-cambria_pld_gpio.patch107
-rw-r--r--target/linux/ixp4xx/patches-2.6.33/201-npe_driver_print_license_location.patch11
-rw-r--r--target/linux/ixp4xx/patches-2.6.33/203-npe_driver_mask_phy_features.patch13
-rw-r--r--target/linux/ixp4xx/patches-2.6.33/205-npe_driver_separate_phy_functions.patch119
-rw-r--r--target/linux/ixp4xx/patches-2.6.33/206-npe_driver_add_update_link_function.patch98
-rw-r--r--target/linux/ixp4xx/patches-2.6.33/207-npe_driver_multiphy_support.patch155
-rw-r--r--target/linux/ixp4xx/patches-2.6.33/295-latch_led_driver.patch200
-rw-r--r--target/linux/ixp4xx/patches-2.6.33/300-avila_fetch_mac.patch244
-rw-r--r--target/linux/ixp4xx/patches-2.6.33/301-avila_led.patch161
-rw-r--r--target/linux/ixp4xx/patches-2.6.33/302-avila_gpio_device.patch16
-rw-r--r--target/linux/ixp4xx/patches-2.6.33/304-ixp4xx_eth_jumboframe.patch80
-rw-r--r--target/linux/ixp4xx/patches-2.6.33/310-gtwx5717_spi_bus.patch52
-rw-r--r--target/linux/ixp4xx/patches-2.6.33/311-gtwx5717_mac_plat_info.patch40
-rw-r--r--target/linux/ixp4xx/patches-2.6.33/312-ixp4xx_pata_optimization.patch137
-rw-r--r--target/linux/ixp4xx/patches-2.6.33/402-ixp4xx_gpiolib.patch125
-rw-r--r--target/linux/ixp4xx/patches-2.6.33/500-usr8200_support.patch342
-rw-r--r--target/linux/ixp4xx/patches-2.6.33/520-tw2662_support.patch329
-rw-r--r--target/linux/ixp4xx/patches-2.6.33/600-skb_avoid_dmabounce.patch13
-rw-r--r--target/linux/ixp4xx/patches-2.6.33/601-arm-dma_free_coherent.patch12
-rw-r--r--target/linux/ixp4xx/patches-2.6.33/603-arm-kluin-array-indexing.patch33
-rw-r--r--target/linux/ixp4xx/patches-2.6.33/604-arm-ixp4xx-sched_clock.patch20
-rw-r--r--target/linux/ixp4xx/patches-2.6.33/605-arm-rmk-cache-flush-optim.patch11
-rw-r--r--target/linux/ixp4xx/patches-2.6.35/020-gateworks_i2c_pld.patch421
-rw-r--r--target/linux/ixp4xx/patches-2.6.35/050-disable_dmabounce.patch120
-rw-r--r--target/linux/ixp4xx/patches-2.6.35/090-increase_entropy_pools.patch15
-rw-r--r--target/linux/ixp4xx/patches-2.6.35/100-wg302v2_gateway7001_mac_plat_info.patch68
-rw-r--r--target/linux/ixp4xx/patches-2.6.35/105-wg302v1_support.patch257
-rw-r--r--target/linux/ixp4xx/patches-2.6.35/110-pronghorn_series_support.patch387
-rw-r--r--target/linux/ixp4xx/patches-2.6.35/111-pronghorn_swap_uarts.patch44
-rw-r--r--target/linux/ixp4xx/patches-2.6.35/115-sidewinder_support.patch282
-rw-r--r--target/linux/ixp4xx/patches-2.6.35/116-sidewinder_fis_location.patch30
-rw-r--r--target/linux/ixp4xx/patches-2.6.35/120-compex_support.patch212
-rw-r--r--target/linux/ixp4xx/patches-2.6.35/130-wrt300nv2_support.patch225
-rw-r--r--target/linux/ixp4xx/patches-2.6.35/131-wrt300nv2_mac_plat_info.patch40
-rw-r--r--target/linux/ixp4xx/patches-2.6.35/132-wrt300nv2_mac_fix.patch71
-rw-r--r--target/linux/ixp4xx/patches-2.6.35/150-lanready_ap1000_support.patch200
-rw-r--r--target/linux/ixp4xx/patches-2.6.35/151-lanready_ap1000_mac_plat_info.patch41
-rw-r--r--target/linux/ixp4xx/patches-2.6.35/162-wg302v1_mem_fixup.patch47
-rw-r--r--target/linux/ixp4xx/patches-2.6.35/170-ixdpg425_mac_plat_info.patch41
-rw-r--r--target/linux/ixp4xx/patches-2.6.35/180-tw5334_support.patch284
-rw-r--r--target/linux/ixp4xx/patches-2.6.35/185-mi424wr_support.patch465
-rw-r--r--target/linux/ixp4xx/patches-2.6.35/190-cambria_support.patch553
-rw-r--r--target/linux/ixp4xx/patches-2.6.35/191-cambria_optional_uart.patch217
-rw-r--r--target/linux/ixp4xx/patches-2.6.35/192-cambria_gpio_device.patch46
-rw-r--r--target/linux/ixp4xx/patches-2.6.35/193-cambria_pld_gpio.patch107
-rw-r--r--target/linux/ixp4xx/patches-2.6.35/201-npe_driver_print_license_location.patch11
-rw-r--r--target/linux/ixp4xx/patches-2.6.35/203-npe_driver_mask_phy_features.patch13
-rw-r--r--target/linux/ixp4xx/patches-2.6.35/205-npe_driver_separate_phy_functions.patch119
-rw-r--r--target/linux/ixp4xx/patches-2.6.35/206-npe_driver_add_update_link_function.patch98
-rw-r--r--target/linux/ixp4xx/patches-2.6.35/207-npe_driver_multiphy_support.patch155
-rw-r--r--target/linux/ixp4xx/patches-2.6.35/295-latch_led_driver.patch201
-rw-r--r--target/linux/ixp4xx/patches-2.6.35/300-avila_fetch_mac.patch242
-rw-r--r--target/linux/ixp4xx/patches-2.6.35/301-avila_led.patch161
-rw-r--r--target/linux/ixp4xx/patches-2.6.35/302-avila_gpio_device.patch16
-rw-r--r--target/linux/ixp4xx/patches-2.6.35/304-ixp4xx_eth_jumboframe.patch80
-rw-r--r--target/linux/ixp4xx/patches-2.6.35/310-gtwx5717_spi_bus.patch52
-rw-r--r--target/linux/ixp4xx/patches-2.6.35/311-gtwx5717_mac_plat_info.patch40
-rw-r--r--target/linux/ixp4xx/patches-2.6.35/312-ixp4xx_pata_optimization.patch137
-rw-r--r--target/linux/ixp4xx/patches-2.6.35/402-ixp4xx_gpiolib.patch125
-rw-r--r--target/linux/ixp4xx/patches-2.6.35/500-usr8200_support.patch342
-rw-r--r--target/linux/ixp4xx/patches-2.6.35/520-tw2662_support.patch333
-rw-r--r--target/linux/ixp4xx/patches-2.6.35/600-skb_avoid_dmabounce.patch13
-rw-r--r--target/linux/ixp4xx/patches-2.6.35/601-arm-dma_free_coherent.patch12
-rw-r--r--target/linux/ixp4xx/patches-2.6.35/603-arm-kluin-array-indexing.patch33
88 files changed, 0 insertions, 13153 deletions
diff --git a/target/linux/ixp4xx/config-2.6.33 b/target/linux/ixp4xx/config-2.6.33
deleted file mode 100644
index 705334ed8..000000000
--- a/target/linux/ixp4xx/config-2.6.33
+++ /dev/null
@@ -1,166 +0,0 @@
-# CONFIG_AEABI is not set
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_ARCH_ADI_COYOTE is not set
-CONFIG_ARCH_IXCDP1100=y
-CONFIG_ARCH_IXDP425=y
-CONFIG_ARCH_IXDP4XX=y
-CONFIG_ARCH_IXP4XX=y
-# CONFIG_ARCH_PRPMC1100 is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARM=y
-CONFIG_ARM_L1_CACHE_SHIFT=5
-# CONFIG_ARM_THUMB is not set
-# CONFIG_ARPD is not set
-CONFIG_BITREVERSE=y
-CONFIG_BOUNCE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200"
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_CPU_ENDIAN_BE32=y
-# CONFIG_CPU_ENDIAN_BE8 is not set
-CONFIG_CPU_IXP43X=y
-CONFIG_CPU_IXP46X=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_XSCALE=y
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_USER is not set
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DEVPORT=y
-# CONFIG_DM9000 is not set
-CONFIG_DMABOUNCE=y
-CONFIG_DNOTIFY=y
-CONFIG_EEPROM_AT24=y
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_FPE_NWFPE is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_DEVICE=y
-CONFIG_GPIO_GW_I2C_PLD=y
-CONFIG_GPIO_SYSFS=y
-# CONFIG_HAMRADIO is not set
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAVE_AOUT=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_HAVE_MTD_OTP=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HWMON=y
-# CONFIG_HWMON_DEBUG_CHIP is not set
-CONFIG_HWMON_VID=y
-CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_IXP4XX=y
-CONFIG_I2C=y
-CONFIG_I2C_ALGOBIT=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_GPIO=y
-# CONFIG_I2C_IOP3XX is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-# CONFIG_ISDN_CAPI is not set
-# CONFIG_ISDN_DRV_GIGASET is not set
-# CONFIG_ISDN_I4L is not set
-# CONFIG_IWMMXT is not set
-CONFIG_IXP4XX_ETH=y
-# CONFIG_IXP4XX_INDIRECT_PCI is not set
-CONFIG_IXP4XX_LEGACY_DMABOUNCE=y
-CONFIG_IXP4XX_NPE=y
-CONFIG_IXP4XX_QMGR=y
-CONFIG_IXP4XX_WATCHDOG=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_LZMA is not set
-CONFIG_LEDS_FSG=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_LATCH=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-CONFIG_MACH_AP1000=y
-CONFIG_MACH_AVILA=y
-CONFIG_MACH_CAMBRIA=y
-CONFIG_MACH_COMPEX=y
-CONFIG_MACH_DSMG600=y
-CONFIG_MACH_FSG=y
-CONFIG_MACH_GATEWAY7001=y
-# CONFIG_MACH_GORAMO_MLR is not set
-# CONFIG_MACH_GTWX5715 is not set
-# CONFIG_MACH_IXDP465 is not set
-CONFIG_MACH_IXDPG425=y
-# CONFIG_MACH_KIXRP435 is not set
-CONFIG_MACH_LOFT=y
-CONFIG_MACH_MI424WR=y
-CONFIG_MACH_NAS100D=y
-CONFIG_MACH_NSLU2=y
-CONFIG_MACH_PRONGHORN=y
-CONFIG_MACH_PRONGHORNMETRO=y
-CONFIG_MACH_SIDEWINDER=y
-CONFIG_MACH_TW2662=y
-CONFIG_MACH_TW5334=y
-CONFIG_MACH_USR8200=y
-CONFIG_MACH_WG302V1=y
-CONFIG_MACH_WG302V2=y
-CONFIG_MACH_WRT300NV2=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-# CONFIG_MTD_CFI_GEOMETRY is not set
-CONFIG_MTD_IXP4XX=y
-CONFIG_MTD_OTP=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_NO_HZ=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PCI=y
-CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
-CONFIG_PHYLIB=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_DS1672=y
-CONFIG_RTC_DRV_ISL1208=y
-CONFIG_RTC_DRV_PCF8563=y
-CONFIG_RTC_DRV_X1205=y
-# CONFIG_SCSI_DMA is not set
-CONFIG_SENSORS_AD7418=y
-CONFIG_SENSORS_MAX6650=y
-CONFIG_SENSORS_W83781D=y
-# CONFIG_SERIAL_8250_EXTENDED is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-CONFIG_SPLIT_PTLOCK_CPUS=999999
-# CONFIG_SWAP is not set
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-CONFIG_UID16=y
-CONFIG_USB_SUPPORT=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_XSCALE_PMU=y
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_ZBOOT_ROM_TEXT=0x0
diff --git a/target/linux/ixp4xx/config-2.6.35 b/target/linux/ixp4xx/config-2.6.35
deleted file mode 100644
index c09a91693..000000000
--- a/target/linux/ixp4xx/config-2.6.35
+++ /dev/null
@@ -1,203 +0,0 @@
-# CONFIG_AEABI is not set
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_ARCH_ADI_COYOTE is not set
-# CONFIG_ARCH_CNS3XXX is not set
-CONFIG_ARCH_IXCDP1100=y
-CONFIG_ARCH_IXDP425=y
-CONFIG_ARCH_IXDP4XX=y
-CONFIG_ARCH_IXP4XX=y
-# CONFIG_ARCH_NUC93X is not set
-# CONFIG_ARCH_PRPMC1100 is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-# CONFIG_ARCH_S5P6440 is not set
-# CONFIG_ARCH_S5P6442 is not set
-# CONFIG_ARCH_S5PC100 is not set
-# CONFIG_ARCH_S5PV210 is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_ARCH_SHMOBILE is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_ARCH_USES_GETTIMEOFFSET is not set
-# CONFIG_ARCH_VEXPRESS is not set
-CONFIG_ARM=y
-CONFIG_ARM_L1_CACHE_SHIFT=5
-# CONFIG_ARM_THUMB is not set
-# CONFIG_ARPD is not set
-CONFIG_ATA=y
-CONFIG_ATA_BMDMA=y
-CONFIG_BITREVERSE=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_BOUNCE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200"
-# CONFIG_CMDLINE_FORCE is not set
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_CPU_ENDIAN_BE32=y
-# CONFIG_CPU_ENDIAN_BE8 is not set
-CONFIG_CPU_HAS_PMU=y
-CONFIG_CPU_IXP43X=y
-CONFIG_CPU_IXP46X=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_XSCALE=y
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_FS is not set
-# CONFIG_DEBUG_USER is not set
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DEVPORT=y
-# CONFIG_DM9000 is not set
-CONFIG_DMABOUNCE=y
-CONFIG_DNOTIFY=y
-CONFIG_EEPROM_AT24=y
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_FPE_NWFPE is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_GARP=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_DEVICE=y
-CONFIG_GPIO_GW_I2C_PLD=y
-CONFIG_GPIO_SYSFS=y
-# CONFIG_HAMRADIO is not set
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAVE_AOUT=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_HAVE_MTD_OTP=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_HWMON=y
-# CONFIG_HWMON_DEBUG_CHIP is not set
-CONFIG_HWMON_VID=y
-CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_IXP4XX=y
-CONFIG_I2C=y
-CONFIG_I2C_ALGOBIT=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_GPIO=y
-# CONFIG_I2C_IOP3XX is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-# CONFIG_ISDN is not set
-# CONFIG_IWMMXT is not set
-CONFIG_IXP4XX_ETH=y
-# CONFIG_IXP4XX_INDIRECT_PCI is not set
-CONFIG_IXP4XX_LEGACY_DMABOUNCE=y
-CONFIG_IXP4XX_NPE=y
-CONFIG_IXP4XX_QMGR=y
-CONFIG_IXP4XX_WATCHDOG=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_LZMA is not set
-CONFIG_LEDS_FSG=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_LATCH=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-CONFIG_MACH_AP1000=y
-CONFIG_MACH_AVILA=y
-CONFIG_MACH_CAMBRIA=y
-CONFIG_MACH_COMPEX=y
-CONFIG_MACH_DSMG600=y
-CONFIG_MACH_FSG=y
-CONFIG_MACH_GATEWAY7001=y
-# CONFIG_MACH_GORAMO_MLR is not set
-# CONFIG_MACH_GTWX5715 is not set
-# CONFIG_MACH_IXDP465 is not set
-CONFIG_MACH_IXDPG425=y
-# CONFIG_MACH_KIXRP435 is not set
-CONFIG_MACH_LOFT=y
-CONFIG_MACH_MI424WR=y
-CONFIG_MACH_NAS100D=y
-CONFIG_MACH_NSLU2=y
-CONFIG_MACH_PRONGHORN=y
-CONFIG_MACH_PRONGHORNMETRO=y
-CONFIG_MACH_SIDEWINDER=y
-CONFIG_MACH_TW2662=y
-CONFIG_MACH_TW5334=y
-CONFIG_MACH_USR8200=y
-CONFIG_MACH_WG302V1=y
-CONFIG_MACH_WG302V2=y
-CONFIG_MACH_WRT300NV2=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-# CONFIG_MTD_CFI_GEOMETRY is not set
-CONFIG_MTD_IXP4XX=y
-CONFIG_MTD_OTP=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NET_DSA=y
-CONFIG_NET_DSA_MV88E6060=y
-# CONFIG_NET_DSA_MV88E6123_61_65 is not set
-# CONFIG_NET_DSA_MV88E6131 is not set
-# CONFIG_NET_DSA_MV88E6XXX is not set
-# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set
-# CONFIG_NET_DSA_TAG_DSA is not set
-# CONFIG_NET_DSA_TAG_EDSA is not set
-CONFIG_NET_DSA_TAG_TRAILER=y
-CONFIG_NO_HZ=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PATA_IXP4XX_CF=y
-CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PHYLIB=y
-# CONFIG_PLAT_SPEAR is not set
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_DS1672=y
-CONFIG_RTC_DRV_ISL1208=y
-CONFIG_RTC_DRV_PCF8563=y
-CONFIG_RTC_DRV_X1205=y
-# CONFIG_SATA_AHCI_PLATFORM is not set
-CONFIG_SCSI=y
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_SCSI_MOD=y
-CONFIG_SENSORS_AD7418=y
-# CONFIG_SENSORS_EMC1403 is not set
-CONFIG_SENSORS_MAX6650=y
-# CONFIG_SENSORS_TMP102 is not set
-CONFIG_SENSORS_W83781D=y
-# CONFIG_SERIAL_8250_EXTENDED is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-CONFIG_SPLIT_PTLOCK_CPUS=999999
-# CONFIG_SWAP is not set
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_UID16=y
-CONFIG_USB_SUPPORT=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_VLAN_8021Q_GVRP=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_XSCALE_PMU=y
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_ZBOOT_ROM_TEXT=0x0
diff --git a/target/linux/ixp4xx/patches-2.6.33/020-gateworks_i2c_pld.patch b/target/linux/ixp4xx/patches-2.6.33/020-gateworks_i2c_pld.patch
deleted file mode 100644
index b51e26dfa..000000000
--- a/target/linux/ixp4xx/patches-2.6.33/020-gateworks_i2c_pld.patch
+++ /dev/null
@@ -1,421 +0,0 @@
---- /dev/null
-+++ b/drivers/gpio/gw_i2c_pld.c
-@@ -0,0 +1,371 @@
-+/*
-+ * Gateworks I2C PLD GPIO expander
-+ *
-+ * Copyright (C) 2009 Gateworks Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/slab.h>
-+#include <linux/hardirq.h>
-+#include <linux/i2c.h>
-+#include <linux/i2c/gw_i2c_pld.h>
-+#include <asm/gpio.h>
-+
-+static const struct i2c_device_id gw_i2c_pld_id[] = {
-+ { "gw_i2c_pld", 8 },
-+ { }
-+};
-+MODULE_DEVICE_TABLE(i2c, gw_i2c_pld_id);
-+
-+/*
-+ * The Gateworks I2C PLD chip only expose one read and one
-+ * write register. Writing a "one" bit (to match the reset state) lets
-+ * that pin be used as an input. It is an open-drain model.
-+ */
-+
-+struct gw_i2c_pld {
-+ struct gpio_chip chip;
-+ struct i2c_client *client;
-+ unsigned out; /* software latch */
-+};
-+
-+/*-------------------------------------------------------------------------*/
-+
-+/*
-+ * The Gateworks I2C PLD chip does not properly send the acknowledge bit
-+ * thus we cannot use standard i2c_smbus functions. We have recreated
-+ * our own here, but we still use the mutex_lock to lock the i2c_bus
-+ * as the device still exists on the I2C bus.
-+*/
-+
-+#define PLD_SCL_GPIO 6
-+#define PLD_SDA_GPIO 7
-+
-+#define SCL_LO() gpio_line_set(PLD_SCL_GPIO, IXP4XX_GPIO_LOW)
-+#define SCL_HI() gpio_line_set(PLD_SCL_GPIO, IXP4XX_GPIO_HIGH)
-+#define SCL_EN() gpio_line_config(PLD_SCL_GPIO, IXP4XX_GPIO_OUT)
-+#define SDA_LO() gpio_line_set(PLD_SDA_GPIO, IXP4XX_GPIO_LOW)
-+#define SDA_HI() gpio_line_set(PLD_SDA_GPIO, IXP4XX_GPIO_HIGH)
-+#define SDA_EN() gpio_line_config(PLD_SDA_GPIO, IXP4XX_GPIO_OUT)
-+#define SDA_DIS() gpio_line_config(PLD_SDA_GPIO, IXP4XX_GPIO_IN)
-+#define SDA_IN(x) gpio_line_get(PLD_SDA_GPIO, &x);
-+
-+static int i2c_pld_write_byte(int address, int byte)
-+{
-+ int i;
-+
-+ address = (address << 1) & ~0x1;
-+
-+ SDA_HI();
-+ SDA_EN();
-+ SCL_EN();
-+ SCL_HI();
-+ SDA_LO();
-+ SCL_LO();
-+
-+ for (i = 7; i >= 0; i--)
-+ {
-+ if (address & (1 << i))
-+ SDA_HI();
-+ else
-+ SDA_LO();
-+
-+ SCL_HI();
-+ SCL_LO();
-+ }
-+
-+ SDA_DIS();
-+ SCL_HI();
-+ SDA_IN(i);
-+ SCL_LO();
-+ SDA_EN();
-+
-+ for (i = 7; i >= 0; i--)
-+ {
-+ if (byte & (1 << i))
-+ SDA_HI();
-+ else
-+ SDA_LO();
-+ SCL_HI();
-+ SCL_LO();
-+ }
-+
-+ SDA_DIS();
-+ SCL_HI();
-+ SDA_IN(i);
-+ SCL_LO();
-+
-+ SDA_HI();
-+ SDA_EN();
-+
-+ SDA_LO();
-+ SCL_HI();
-+ SDA_HI();
-+ SCL_LO();
-+ SCL_HI();
-+
-+ return 0;
-+}
-+
-+static unsigned int i2c_pld_read_byte(int address)
-+{
-+ int i = 0, byte = 0;
-+ int bit;
-+
-+ address = (address << 1) | 0x1;
-+
-+ SDA_HI();
-+ SDA_EN();
-+ SCL_EN();
-+ SCL_HI();
-+ SDA_LO();
-+ SCL_LO();
-+
-+ for (i = 7; i >= 0; i--)
-+ {
-+ if (address & (1 << i))
-+ SDA_HI();
-+ else
-+ SDA_LO();
-+
-+ SCL_HI();
-+ SCL_LO();
-+ }
-+
-+ SDA_DIS();
-+ SCL_HI();
-+ SDA_IN(i);
-+ SCL_LO();
-+ SDA_EN();
-+
-+ SDA_DIS();
-+ for (i = 7; i >= 0; i--)
-+ {
-+ SCL_HI();
-+ SDA_IN(bit);
-+ byte |= bit << i;
-+ SCL_LO();
-+ }
-+
-+ SDA_LO();
-+ SCL_HI();
-+ SDA_HI();
-+ SCL_LO();
-+ SCL_HI();
-+
-+ return byte;
-+}
-+
-+
-+static int gw_i2c_pld_input8(struct gpio_chip *chip, unsigned offset)
-+{
-+ int ret;
-+ struct gw_i2c_pld *gpio = container_of(chip, struct gw_i2c_pld, chip);
-+ struct i2c_adapter *adap = gpio->client->adapter;
-+
-+ if (in_atomic() || irqs_disabled()) {
-+ ret = mutex_trylock(&adap->bus_lock);
-+ if (!ret)
-+ /* I2C activity is ongoing. */
-+ return -EAGAIN;
-+ } else {
-+ mutex_lock_nested(&adap->bus_lock, adap->level);
-+ }
-+
-+ gpio->out |= (1 << offset);
-+
-+ ret = i2c_pld_write_byte(gpio->client->addr, gpio->out);
-+
-+ mutex_unlock(&adap->bus_lock);
-+
-+ return ret;
-+}
-+
-+static int gw_i2c_pld_get8(struct gpio_chip *chip, unsigned offset)
-+{
-+ int ret;
-+ s32 value;
-+ struct gw_i2c_pld *gpio = container_of(chip, struct gw_i2c_pld, chip);
-+ struct i2c_adapter *adap = gpio->client->adapter;
-+
-+ if (in_atomic() || irqs_disabled()) {
-+ ret = mutex_trylock(&adap->bus_lock);
-+ if (!ret)
-+ /* I2C activity is ongoing. */
-+ return -EAGAIN;
-+ } else {
-+ mutex_lock_nested(&adap->bus_lock, adap->level);
-+ }
-+
-+ value = i2c_pld_read_byte(gpio->client->addr);
-+
-+ mutex_unlock(&adap->bus_lock);
-+
-+ return (value < 0) ? 0 : (value & (1 << offset));
-+}
-+
-+static int gw_i2c_pld_output8(struct gpio_chip *chip, unsigned offset, int value)
-+{
-+ int ret;
-+
-+ struct gw_i2c_pld *gpio = container_of(chip, struct gw_i2c_pld, chip);
-+ struct i2c_adapter *adap = gpio->client->adapter;
-+
-+ unsigned bit = 1 << offset;
-+
-+ if (in_atomic() || irqs_disabled()) {
-+ ret = mutex_trylock(&adap->bus_lock);
-+ if (!ret)
-+ /* I2C activity is ongoing. */
-+ return -EAGAIN;
-+ } else {
-+ mutex_lock_nested(&adap->bus_lock, adap->level);
-+ }
-+
-+
-+ if (value)
-+ gpio->out |= bit;
-+ else
-+ gpio->out &= ~bit;
-+
-+ ret = i2c_pld_write_byte(gpio->client->addr, gpio->out);
-+
-+ mutex_unlock(&adap->bus_lock);
-+
-+ return ret;
-+}
-+
-+static void gw_i2c_pld_set8(struct gpio_chip *chip, unsigned offset, int value)
-+{
-+ gw_i2c_pld_output8(chip, offset, value);
-+}
-+
-+/*-------------------------------------------------------------------------*/
-+
-+static int gw_i2c_pld_probe(struct i2c_client *client,
-+ const struct i2c_device_id *id)
-+{
-+ struct gw_i2c_pld_platform_data *pdata;
-+ struct gw_i2c_pld *gpio;
-+ int status;
-+
-+ pdata = client->dev.platform_data;
-+ if (!pdata)
-+ return -ENODEV;
-+
-+ /* Allocate, initialize, and register this gpio_chip. */
-+ gpio = kzalloc(sizeof *gpio, GFP_KERNEL);
-+ if (!gpio)
-+ return -ENOMEM;
-+
-+ gpio->chip.base = pdata->gpio_base;
-+ gpio->chip.can_sleep = 1;
-+ gpio->chip.dev = &client->dev;
-+ gpio->chip.owner = THIS_MODULE;
-+
-+ gpio->chip.ngpio = pdata->nr_gpio;
-+ gpio->chip.direction_input = gw_i2c_pld_input8;
-+ gpio->chip.get = gw_i2c_pld_get8;
-+ gpio->chip.direction_output = gw_i2c_pld_output8;
-+ gpio->chip.set = gw_i2c_pld_set8;
-+
-+ gpio->chip.label = client->name;
-+
-+ gpio->client = client;
-+ i2c_set_clientdata(client, gpio);
-+
-+ gpio->out = 0xFF;
-+
-+ status = gpiochip_add(&gpio->chip);
-+ if (status < 0)
-+ goto fail;
-+
-+ dev_info(&client->dev, "gpios %d..%d on a %s%s\n",
-+ gpio->chip.base,
-+ gpio->chip.base + gpio->chip.ngpio - 1,
-+ client->name,
-+ client->irq ? " (irq ignored)" : "");
-+
-+ /* Let platform code set up the GPIOs and their users.
-+ * Now is the first time anyone could use them.
-+ */
-+ if (pdata->setup) {
-+ status = pdata->setup(client,
-+ gpio->chip.base, gpio->chip.ngpio,
-+ pdata->context);
-+ if (status < 0)
-+ dev_warn(&client->dev, "setup --> %d\n", status);
-+ }
-+
-+ return 0;
-+
-+fail:
-+ dev_dbg(&client->dev, "probe error %d for '%s'\n",
-+ status, client->name);
-+ kfree(gpio);
-+ return status;
-+}
-+
-+static int gw_i2c_pld_remove(struct i2c_client *client)
-+{
-+ struct gw_i2c_pld_platform_data *pdata = client->dev.platform_data;
-+ struct gw_i2c_pld *gpio = i2c_get_clientdata(client);
-+ int status = 0;
-+
-+ if (pdata->teardown) {
-+ status = pdata->teardown(client,
-+ gpio->chip.base, gpio->chip.ngpio,
-+ pdata->context);
-+ if (status < 0) {
-+ dev_err(&client->dev, "%s --> %d\n",
-+ "teardown", status);
-+ return status;
-+ }
-+ }
-+
-+ status = gpiochip_remove(&gpio->chip);
-+ if (status == 0)
-+ kfree(gpio);
-+ else
-+ dev_err(&client->dev, "%s --> %d\n", "remove", status);
-+ return status;
-+}
-+
-+static struct i2c_driver gw_i2c_pld_driver = {
-+ .driver = {
-+ .name = "gw_i2c_pld",
-+ .owner = THIS_MODULE,
-+ },
-+ .probe = gw_i2c_pld_probe,
-+ .remove = gw_i2c_pld_remove,
-+ .id_table = gw_i2c_pld_id,
-+};
-+
-+static int __init gw_i2c_pld_init(void)
-+{
-+ return i2c_add_driver(&gw_i2c_pld_driver);
-+}
-+module_init(gw_i2c_pld_init);
-+
-+static void __exit gw_i2c_pld_exit(void)
-+{
-+ i2c_del_driver(&gw_i2c_pld_driver);
-+}
-+module_exit(gw_i2c_pld_exit);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Chris Lang");
---- a/drivers/gpio/Kconfig
-+++ b/drivers/gpio/Kconfig
-@@ -221,6 +221,14 @@ config GPIO_TIMBERDALE
- ---help---
- Add support for the GPIO IP in the timberdale FPGA.
-
-+config GPIO_GW_I2C_PLD
-+ tristate "Gateworks I2C PLD GPIO Expander"
-+ depends on I2C
-+ help
-+ Say yes here to provide access to the Gateworks I2C PLD GPIO
-+ Expander. This is used at least on the GW2358-4.
-+
-+
- comment "SPI GPIO expanders:"
-
- config GPIO_MAX7301
---- a/drivers/gpio/Makefile
-+++ b/drivers/gpio/Makefile
-@@ -22,3 +22,4 @@ obj-$(CONFIG_GPIO_CS5535) += cs5535-gpio
- obj-$(CONFIG_GPIO_BT8XX) += bt8xxgpio.o
- obj-$(CONFIG_GPIO_VR41XX) += vr41xx_giu.o
- obj-$(CONFIG_GPIO_WM831X) += wm831x-gpio.o
-+obj-$(CONFIG_GPIO_GW_I2C_PLD) += gw_i2c_pld.o
---- /dev/null
-+++ b/include/linux/i2c/gw_i2c_pld.h
-@@ -0,0 +1,20 @@
-+#ifndef __LINUX_GW_I2C_PLD_H
-+#define __LINUX_GW_I2C_PLD_H
-+
-+/**
-+ * The Gateworks I2C PLD Implements an additional 8 bits of GPIO through the PLD
-+ */
-+
-+struct gw_i2c_pld_platform_data {
-+ unsigned gpio_base;
-+ unsigned nr_gpio;
-+ int (*setup)(struct i2c_client *client,
-+ int gpio, unsigned ngpio,
-+ void *context);
-+ int (*teardown)(struct i2c_client *client,
-+ int gpio, unsigned ngpio,
-+ void *context);
-+ void *context;
-+};
-+
-+#endif /* __LINUX_GW_I2C_PLD_H */
diff --git a/target/linux/ixp4xx/patches-2.6.33/050-disable_dmabounce.patch b/target/linux/ixp4xx/patches-2.6.33/050-disable_dmabounce.patch
deleted file mode 100644
index 64b3da0e5..000000000
--- a/target/linux/ixp4xx/patches-2.6.33/050-disable_dmabounce.patch
+++ /dev/null
@@ -1,164 +0,0 @@
---- a/arch/arm/Kconfig
-+++ b/arch/arm/Kconfig
-@@ -417,7 +417,6 @@ config ARCH_IXP4XX
- select GENERIC_GPIO
- select GENERIC_TIME
- select GENERIC_CLOCKEVENTS
-- select DMABOUNCE if PCI
- help
- Support for Intel's IXP4XX (XScale) family of processors.
-
---- a/arch/arm/mach-ixp4xx/Kconfig
-+++ b/arch/arm/mach-ixp4xx/Kconfig
-@@ -199,6 +199,45 @@ config IXP4XX_INDIRECT_PCI
- need to use the indirect method instead. If you don't know
- what you need, leave this option unselected.
-
-+config IXP4XX_LEGACY_DMABOUNCE
-+ bool "legacy PCI DMA bounce support"
-+ depends on PCI
-+ default n
-+ select DMABOUNCE
-+ help
-+ The IXP4xx is limited to a 64MB window for PCI DMA, which
-+ requires that PCI accesses above 64MB are bounced via buffers
-+ below 64MB. Furthermore the IXP4xx has an erratum where PCI
-+ read prefetches just below the 64MB limit can trigger lockups.
-+
-+ The kernel has traditionally handled these two issue by using
-+ ARM specific DMA bounce support code for all accesses >= 64MB.
-+ That code causes problems of its own, so it is desirable to
-+ disable it. As the kernel now has a workaround for the PCI read
-+ prefetch erratum, it no longer requires the ARM bounce code.
-+
-+ Enabling this option makes IXP4xx continue to use the problematic
-+ ARM DMA bounce code. Disabling this option makes IXP4xx use the
-+ kernel's generic bounce code.
-+
-+ Say 'N'.
-+
-+config IXP4XX_ZONE_DMA
-+ bool "Support > 64MB RAM"
-+ depends on !IXP4XX_LEGACY_DMABOUNCE
-+ default y
-+ select ZONE_DMA
-+ help
-+ The IXP4xx is limited to a 64MB window for PCI DMA, which
-+ requires that PCI accesses above 64MB are bounced via buffers
-+ below 64MB.
-+
-+ Disabling this option allows you to omit the support code for
-+ DMA-able memory allocations and DMA bouncing, but the kernel
-+ will then not work properly if more than 64MB of RAM is present.
-+
-+ Say 'Y' unless your platform is limited to <= 64MB of RAM.
-+
- config IXP4XX_QMGR
- tristate "IXP4xx Queue Manager support"
- help
---- a/arch/arm/mach-ixp4xx/common-pci.c
-+++ b/arch/arm/mach-ixp4xx/common-pci.c
-@@ -321,27 +321,38 @@ static int abort_handler(unsigned long a
- */
- static int ixp4xx_pci_platform_notify(struct device *dev)
- {
-- if(dev->bus == &pci_bus_type) {
-- *dev->dma_mask = SZ_64M - 1;
-+ if (dev->bus == &pci_bus_type) {
-+ *dev->dma_mask = SZ_64M - 1;
- dev->coherent_dma_mask = SZ_64M - 1;
-+#ifdef CONFIG_DMABOUNCE
- dmabounce_register_dev(dev, 2048, 4096);
-+#endif
- }
- return 0;
- }
-
- static int ixp4xx_pci_platform_notify_remove(struct device *dev)
- {
-- if(dev->bus == &pci_bus_type) {
-+#ifdef CONFIG_DMABOUNCE
-+ if (dev->bus == &pci_bus_type)
- dmabounce_unregister_dev(dev);
-- }
-+#endif
- return 0;
- }
-
-+#ifdef CONFIG_DMABOUNCE
- int dma_needs_bounce(struct device *dev, dma_addr_t dma_addr, size_t size)
- {
-+ /* Note that this returns true for the last page below 64M due to
-+ * IXP4xx erratum 15 (SCR 1289), which states that PCI prefetches
-+ * can cross the boundary between valid memory and a reserved region
-+ * causing AHB bus errors and a lock-up.
-+ */
- return (dev->bus == &pci_bus_type ) && ((dma_addr + size) >= SZ_64M);
- }
-+#endif
-
-+#ifdef CONFIG_ZONE_DMA
- /*
- * Only first 64MB of memory can be accessed via PCI.
- * We use GFP_DMA to allocate safe buffers to do map/unmap.
-@@ -364,6 +375,7 @@ void __init ixp4xx_adjust_zones(int node
- zhole_size[1] = zhole_size[0];
- zhole_size[0] = 0;
- }
-+#endif
-
- void __init ixp4xx_pci_preinit(void)
- {
-@@ -513,19 +525,35 @@ struct pci_bus * __devinit ixp4xx_scan_b
- int
- pci_set_dma_mask(struct pci_dev *dev, u64 mask)
- {
-- if (mask >= SZ_64M - 1 )
-+#ifdef CONFIG_DMABOUNCE
-+ if (mask >= SZ_64M - 1)
- return 0;
-
- return -EIO;
-+#else
-+ /* Only honour masks < SZ_64M. Silently ignore masks >= SZ_64M
-+ as generic drivers do not know about IXP4xx PCI DMA quirks. */
-+ if (mask < SZ_64M)
-+ dev->dma_mask = mask;
-+ return 0;
-+#endif
- }
-
- int
- pci_set_consistent_dma_mask(struct pci_dev *dev, u64 mask)
- {
-- if (mask >= SZ_64M - 1 )
-+#ifdef CONFIG_DMABOUNCE
-+ if (mask >= SZ_64M - 1)
- return 0;
-
- return -EIO;
-+#else
-+ /* Only honour masks < SZ_64M. Silently ignore masks >= SZ_64M
-+ as generic drivers do not know about IXP4xx PCI DMA quirks. */
-+ if (mask < SZ_64M)
-+ dev->dev.coherent_dma_mask = mask;
-+ return 0;
-+#endif
- }
-
- EXPORT_SYMBOL(ixp4xx_pci_read);
---- a/arch/arm/mach-ixp4xx/include/mach/memory.h
-+++ b/arch/arm/mach-ixp4xx/include/mach/memory.h
-@@ -16,10 +16,12 @@
-
- #if !defined(__ASSEMBLY__) && defined(CONFIG_PCI)
-
-+#ifdef CONFIG_ZONE_DMA
- void ixp4xx_adjust_zones(int node, unsigned long *size, unsigned long *holes);
-
- #define arch_adjust_zones(node, size, holes) \
- ixp4xx_adjust_zones(node, size, holes)
-+#endif
-
- #define ISA_DMA_THRESHOLD (SZ_64M - 1)
- #define MAX_DMA_ADDRESS (PAGE_OFFSET + SZ_64M)
diff --git a/target/linux/ixp4xx/patches-2.6.33/090-increase_entropy_pools.patch b/target/linux/ixp4xx/patches-2.6.33/090-increase_entropy_pools.patch
deleted file mode 100644
index f67b9b0e7..000000000
--- a/target/linux/ixp4xx/patches-2.6.33/090-increase_entropy_pools.patch
+++ /dev/null
@@ -1,15 +0,0 @@
---- a/drivers/char/random.c
-+++ b/drivers/char/random.c
-@@ -264,9 +264,9 @@
- /*
- * Configuration information
- */
--#define INPUT_POOL_WORDS 128
--#define OUTPUT_POOL_WORDS 32
--#define SEC_XFER_SIZE 512
-+#define INPUT_POOL_WORDS 256
-+#define OUTPUT_POOL_WORDS 64
-+#define SEC_XFER_SIZE 1024
-
- /*
- * The minimum number of bits of entropy before we wake up a read on
diff --git a/target/linux/ixp4xx/patches-2.6.33/100-wg302v2_gateway7001_mac_plat_info.patch b/target/linux/ixp4xx/patches-2.6.33/100-wg302v2_gateway7001_mac_plat_info.patch
deleted file mode 100644
index a19a4085a..000000000
--- a/target/linux/ixp4xx/patches-2.6.33/100-wg302v2_gateway7001_mac_plat_info.patch
+++ /dev/null
@@ -1,68 +0,0 @@
---- a/arch/arm/mach-ixp4xx/gateway7001-setup.c
-+++ b/arch/arm/mach-ixp4xx/gateway7001-setup.c
-@@ -76,9 +76,35 @@ static struct platform_device gateway700
- .resource = &gateway7001_uart_resource,
- };
-
-+static struct eth_plat_info gateway7001_plat_eth[] = {
-+ {
-+ .phy = 1,
-+ .rxq = 3,
-+ .txreadyq = 20,
-+ }, {
-+ .phy = 2,
-+ .rxq = 4,
-+ .txreadyq = 21,
-+ }
-+};
-+
-+static struct platform_device gateway7001_eth[] = {
-+ {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEB,
-+ .dev.platform_data = gateway7001_plat_eth,
-+ }, {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEC,
-+ .dev.platform_data = gateway7001_plat_eth + 1,
-+ }
-+};
-+
- static struct platform_device *gateway7001_devices[] __initdata = {
- &gateway7001_flash,
-- &gateway7001_uart
-+ &gateway7001_uart,
-+ &gateway7001_eth[0],
-+ &gateway7001_eth[1],
- };
-
- static void __init gateway7001_init(void)
---- a/arch/arm/mach-ixp4xx/wg302v2-setup.c
-+++ b/arch/arm/mach-ixp4xx/wg302v2-setup.c
-@@ -77,9 +77,26 @@ static struct platform_device wg302v2_ua
- .resource = &wg302v2_uart_resource,
- };
-
-+static struct eth_plat_info wg302v2_plat_eth[] = {
-+ {
-+ .phy = 8,
-+ .rxq = 3,
-+ .txreadyq = 20,
-+ }
-+};
-+
-+static struct platform_device wg302v2_eth[] = {
-+ {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEB,
-+ .dev.platform_data = wg302v2_plat_eth,
-+ }
-+};
-+
- static struct platform_device *wg302v2_devices[] __initdata = {
- &wg302v2_flash,
- &wg302v2_uart,
-+ &wg302v2_eth[0],
- };
-
- static void __init wg302v2_init(void)
diff --git a/target/linux/ixp4xx/patches-2.6.33/105-wg302v1_support.patch b/target/linux/ixp4xx/patches-2.6.33/105-wg302v1_support.patch
deleted file mode 100644
index e8b4342e7..000000000
--- a/target/linux/ixp4xx/patches-2.6.33/105-wg302v1_support.patch
+++ /dev/null
@@ -1,257 +0,0 @@
---- a/arch/arm/configs/ixp4xx_defconfig
-+++ b/arch/arm/configs/ixp4xx_defconfig
-@@ -155,6 +155,7 @@ CONFIG_MACH_AVILA=y
- CONFIG_MACH_LOFT=y
- CONFIG_ARCH_ADI_COYOTE=y
- CONFIG_MACH_GATEWAY7001=y
-+CONFIG_MACH_WG302V1=y
- CONFIG_MACH_WG302V2=y
- CONFIG_ARCH_IXDP425=y
- CONFIG_MACH_IXDPG425=y
---- a/arch/arm/mach-ixp4xx/Kconfig
-+++ b/arch/arm/mach-ixp4xx/Kconfig
-@@ -49,6 +49,14 @@ config MACH_GATEWAY7001
- 7001 Access Point. For more information on this platform,
- see http://openwrt.org
-
-+config MACH_WG302V1
-+ bool "Netgear WG302 v1 / WAG302 v1"
-+ select PCI
-+ help
-+ Say 'Y' here if you want your kernel to support Netgear's
-+ WG302 v1 or WAG302 v1 Access Points. For more information
-+ on this platform, see http://openwrt.org
-+
- config MACH_WG302V2
- bool "Netgear WG302 v2 / WAG302 v2"
- select PCI
---- a/arch/arm/mach-ixp4xx/Makefile
-+++ b/arch/arm/mach-ixp4xx/Makefile
-@@ -14,6 +14,7 @@ obj-pci-$(CONFIG_MACH_NSLU2) += nslu2-p
- obj-pci-$(CONFIG_MACH_NAS100D) += nas100d-pci.o
- obj-pci-$(CONFIG_MACH_DSMG600) += dsmg600-pci.o
- obj-pci-$(CONFIG_MACH_GATEWAY7001) += gateway7001-pci.o
-+obj-pci-$(CONFIG_MACH_WG302V1) += wg302v1-pci.o
- obj-pci-$(CONFIG_MACH_WG302V2) += wg302v2-pci.o
- obj-pci-$(CONFIG_MACH_FSG) += fsg-pci.o
-
-@@ -28,6 +29,7 @@ obj-$(CONFIG_MACH_NSLU2) += nslu2-setup.
- obj-$(CONFIG_MACH_NAS100D) += nas100d-setup.o
- obj-$(CONFIG_MACH_DSMG600) += dsmg600-setup.o
- obj-$(CONFIG_MACH_GATEWAY7001) += gateway7001-setup.o
-+obj-$(CONFIG_MACH_WG302V1) += wg302v1-setup.o
- obj-$(CONFIG_MACH_WG302V2) += wg302v2-setup.o
- obj-$(CONFIG_MACH_FSG) += fsg-setup.o
- obj-$(CONFIG_MACH_GORAMO_MLR) += goramo_mlr.o
---- /dev/null
-+++ b/arch/arm/mach-ixp4xx/wg302v1-pci.c
-@@ -0,0 +1,64 @@
-+/*
-+ * arch/arch/mach-ixp4xx/wg302v1-pci.c
-+ *
-+ * PCI setup routines for the Netgear WG302 v1 and WAG302 v1
-+ *
-+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * based on coyote-pci.c:
-+ * Copyright (C) 2002 Jungo Software Technologies.
-+ * Copyright (C) 2003 MontaVista Software, Inc.
-+ *
-+ * Maintainer: Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/pci.h>
-+#include <linux/init.h>
-+#include <linux/irq.h>
-+
-+#include <asm/mach-types.h>
-+#include <mach/hardware.h>
-+
-+#include <asm/mach/pci.h>
-+
-+void __init wg302v1_pci_preinit(void)
-+{
-+ set_irq_type(IRQ_IXP4XX_GPIO8, IRQ_TYPE_LEVEL_LOW);
-+ set_irq_type(IRQ_IXP4XX_GPIO10, IRQ_TYPE_LEVEL_LOW);
-+
-+ ixp4xx_pci_preinit();
-+}
-+
-+static int __init wg302v1_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+ if (slot == 1)
-+ return IRQ_IXP4XX_GPIO8;
-+ else if (slot == 2)
-+ return IRQ_IXP4XX_GPIO10;
-+ else
-+ return -1;
-+}
-+
-+struct hw_pci wg302v1_pci __initdata = {
-+ .nr_controllers = 1,
-+ .preinit = wg302v1_pci_preinit,
-+ .swizzle = pci_std_swizzle,
-+ .setup = ixp4xx_setup,
-+ .scan = ixp4xx_scan_bus,
-+ .map_irq = wg302v1_map_irq,
-+};
-+
-+int __init wg302v1_pci_init(void)
-+{
-+ if (machine_is_wg302v1())
-+ pci_common_init(&wg302v1_pci);
-+ return 0;
-+}
-+
-+subsys_initcall(wg302v1_pci_init);
---- /dev/null
-+++ b/arch/arm/mach-ixp4xx/wg302v1-setup.c
-@@ -0,0 +1,142 @@
-+/*
-+ * arch/arm/mach-ixp4xx/wg302v1-setup.c
-+ *
-+ * Board setup for the Netgear WG302 v1 and WAG302 v1
-+ *
-+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * based on coyote-setup.c:
-+ * Copyright (C) 2003-2005 MontaVista Software, Inc.
-+ *
-+ * Author: Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/device.h>
-+#include <linux/serial.h>
-+#include <linux/tty.h>
-+#include <linux/serial_8250.h>
-+#include <linux/slab.h>
-+#include <linux/types.h>
-+#include <linux/memory.h>
-+
-+#include <asm/setup.h>
-+#include <mach/hardware.h>
-+#include <asm/irq.h>
-+#include <asm/mach-types.h>
-+#include <asm/mach/arch.h>
-+#include <asm/mach/flash.h>
-+
-+static struct flash_platform_data wg302v1_flash_data = {
-+ .map_name = "cfi_probe",
-+ .width = 2,
-+};
-+
-+static struct resource wg302v1_flash_resource = {
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct platform_device wg302v1_flash = {
-+ .name = "IXP4XX-Flash",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = &wg302v1_flash_data,
-+ },
-+ .num_resources = 1,
-+ .resource = &wg302v1_flash_resource,
-+};
-+
-+static struct resource wg302v1_uart_resources[] = {
-+ {
-+ .start = IXP4XX_UART1_BASE_PHYS,
-+ .end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ {
-+ .start = IXP4XX_UART2_BASE_PHYS,
-+ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM,
-+ }
-+};
-+
-+static struct plat_serial8250_port wg302v1_uart_data[] = {
-+ {
-+ .mapbase = IXP4XX_UART1_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART1,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ {
-+ .mapbase = IXP4XX_UART2_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART2,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ { },
-+};
-+
-+static struct platform_device wg302v1_uart = {
-+ .name = "serial8250",
-+ .id = PLAT8250_DEV_PLATFORM,
-+ .dev = {
-+ .platform_data = wg302v1_uart_data,
-+ },
-+ .num_resources = 2,
-+ .resource = wg302v1_uart_resources,
-+};
-+
-+static struct eth_plat_info wg302v1_plat_eth[] = {
-+ {
-+ .phy = 30,
-+ .rxq = 3,
-+ .txreadyq = 20,
-+ }
-+};
-+
-+static struct platform_device wg302v1_eth[] = {
-+ {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEB,
-+ .dev.platform_data = wg302v1_plat_eth,
-+ }
-+};
-+
-+static struct platform_device *wg302v1_devices[] __initdata = {
-+ &wg302v1_flash,
-+ &wg302v1_uart,
-+ &wg302v1_eth[0],
-+};
-+
-+static void __init wg302v1_init(void)
-+{
-+ ixp4xx_sys_init();
-+
-+ wg302v1_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-+ wg302v1_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
-+
-+ *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
-+ *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
-+
-+ platform_add_devices(wg302v1_devices, ARRAY_SIZE(wg302v1_devices));
-+}
-+
-+#ifdef CONFIG_MACH_WG302V1
-+MACHINE_START(WG302V1, "Netgear WG302 v1 / WAG302 v1")
-+ /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
-+ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
-+ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
-+ .map_io = ixp4xx_map_io,
-+ .init_irq = ixp4xx_init_irq,
-+ .timer = &ixp4xx_timer,
-+ .boot_params = 0x0100,
-+ .init_machine = wg302v1_init,
-+MACHINE_END
-+#endif
diff --git a/target/linux/ixp4xx/patches-2.6.33/110-pronghorn_series_support.patch b/target/linux/ixp4xx/patches-2.6.33/110-pronghorn_series_support.patch
deleted file mode 100644
index c03869226..000000000
--- a/target/linux/ixp4xx/patches-2.6.33/110-pronghorn_series_support.patch
+++ /dev/null
@@ -1,387 +0,0 @@
---- a/arch/arm/configs/ixp4xx_defconfig
-+++ b/arch/arm/configs/ixp4xx_defconfig
-@@ -157,6 +157,8 @@ CONFIG_ARCH_ADI_COYOTE=y
- CONFIG_MACH_GATEWAY7001=y
- CONFIG_MACH_WG302V1=y
- CONFIG_MACH_WG302V2=y
-+CONFIG_MACH_PRONGHORN=y
-+CONFIG_MACH_PRONGHORNMETRO=y
- CONFIG_ARCH_IXDP425=y
- CONFIG_MACH_IXDPG425=y
- CONFIG_MACH_IXDP465=y
---- a/arch/arm/mach-ixp4xx/Kconfig
-+++ b/arch/arm/mach-ixp4xx/Kconfig
-@@ -65,6 +65,22 @@ config MACH_WG302V2
- WG302 v2 or WAG302 v2 Access Points. For more information
- on this platform, see http://openwrt.org
-
-+config MACH_PRONGHORN
-+ bool "ADI Pronghorn series"
-+ select PCI
-+ help
-+ Say 'Y' here if you want your kernel to support the ADI
-+ Engineering Pronghorn series. For more
-+ information on this platform, see http://www.adiengineering.com
-+
-+#
-+# There're only minimal differences kernel-wise between the Pronghorn and
-+# Pronghorn Metro boards - they use different chip selects to drive the
-+# CF slot connected to the expansion bus, so we just enable them together.
-+#
-+config MACH_PRONGHORNMETRO
-+ def_bool MACH_PRONGHORN
-+
- config ARCH_IXDP425
- bool "IXDP425"
- help
---- a/arch/arm/mach-ixp4xx/Makefile
-+++ b/arch/arm/mach-ixp4xx/Makefile
-@@ -17,6 +17,7 @@ obj-pci-$(CONFIG_MACH_GATEWAY7001) += ga
- obj-pci-$(CONFIG_MACH_WG302V1) += wg302v1-pci.o
- obj-pci-$(CONFIG_MACH_WG302V2) += wg302v2-pci.o
- obj-pci-$(CONFIG_MACH_FSG) += fsg-pci.o
-+obj-pci-$(CONFIG_MACH_PRONGHORN) += pronghorn-pci.o
-
- obj-y += common.o
-
-@@ -33,6 +34,7 @@ obj-$(CONFIG_MACH_WG302V1) += wg302v1-se
- obj-$(CONFIG_MACH_WG302V2) += wg302v2-setup.o
- obj-$(CONFIG_MACH_FSG) += fsg-setup.o
- obj-$(CONFIG_MACH_GORAMO_MLR) += goramo_mlr.o
-+obj-$(CONFIG_MACH_PRONGHORN) += pronghorn-setup.o
-
- obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o
- obj-$(CONFIG_IXP4XX_QMGR) += ixp4xx_qmgr.o
---- /dev/null
-+++ b/arch/arm/mach-ixp4xx/pronghorn-pci.c
-@@ -0,0 +1,70 @@
-+/*
-+ * arch/arch/mach-ixp4xx/pronghorn-pci.c
-+ *
-+ * PCI setup routines for ADI Engineering Pronghorn series
-+ *
-+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * based on coyote-pci.c:
-+ * Copyright (C) 2002 Jungo Software Technologies.
-+ * Copyright (C) 2003 MontaVista Softwrae, Inc.
-+ *
-+ * Maintainer: Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/pci.h>
-+#include <linux/init.h>
-+#include <linux/irq.h>
-+
-+#include <asm/mach-types.h>
-+#include <mach/hardware.h>
-+
-+#include <asm/mach/pci.h>
-+
-+void __init pronghorn_pci_preinit(void)
-+{
-+ set_irq_type(IRQ_IXP4XX_GPIO4, IRQ_TYPE_LEVEL_LOW);
-+ set_irq_type(IRQ_IXP4XX_GPIO6, IRQ_TYPE_LEVEL_LOW);
-+ set_irq_type(IRQ_IXP4XX_GPIO11, IRQ_TYPE_LEVEL_LOW);
-+ set_irq_type(IRQ_IXP4XX_GPIO1, IRQ_TYPE_LEVEL_LOW);
-+
-+ ixp4xx_pci_preinit();
-+}
-+
-+static int __init pronghorn_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+ if (slot == 13)
-+ return IRQ_IXP4XX_GPIO4;
-+ else if (slot == 14)
-+ return IRQ_IXP4XX_GPIO6;
-+ else if (slot == 15)
-+ return IRQ_IXP4XX_GPIO11;
-+ else if (slot == 16)
-+ return IRQ_IXP4XX_GPIO1;
-+ else
-+ return -1;
-+}
-+
-+struct hw_pci pronghorn_pci __initdata = {
-+ .nr_controllers = 1,
-+ .preinit = pronghorn_pci_preinit,
-+ .swizzle = pci_std_swizzle,
-+ .setup = ixp4xx_setup,
-+ .scan = ixp4xx_scan_bus,
-+ .map_irq = pronghorn_map_irq,
-+};
-+
-+int __init pronghorn_pci_init(void)
-+{
-+ if (machine_is_pronghorn() || machine_is_pronghorn_metro())
-+ pci_common_init(&pronghorn_pci);
-+ return 0;
-+}
-+
-+subsys_initcall(pronghorn_pci_init);
---- /dev/null
-+++ b/arch/arm/mach-ixp4xx/pronghorn-setup.c
-@@ -0,0 +1,245 @@
-+/*
-+ * arch/arm/mach-ixp4xx/pronghorn-setup.c
-+ *
-+ * Board setup for the ADI Engineering Pronghorn series
-+ *
-+ * Copyright (C) 2008 Imre Kaloz <Kaloz@openwrt.org>
-+ *
-+ * based on coyote-setup.c:
-+ * Copyright (C) 2003-2005 MontaVista Software, Inc.
-+ *
-+ * Author: Imre Kaloz <Kaloz@openwrt.org>
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/device.h>
-+#include <linux/serial.h>
-+#include <linux/tty.h>
-+#include <linux/serial_8250.h>
-+#include <linux/slab.h>
-+#include <linux/types.h>
-+#include <linux/memory.h>
-+#include <linux/i2c-gpio.h>
-+#include <linux/leds.h>
-+
-+#include <asm/setup.h>
-+#include <mach/hardware.h>
-+#include <asm/irq.h>
-+#include <asm/mach-types.h>
-+#include <asm/mach/arch.h>
-+#include <asm/mach/flash.h>
-+
-+static struct flash_platform_data pronghorn_flash_data = {
-+ .map_name = "cfi_probe",
-+ .width = 2,
-+};
-+
-+static struct resource pronghorn_flash_resource = {
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct platform_device pronghorn_flash = {
-+ .name = "IXP4XX-Flash",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = &pronghorn_flash_data,
-+ },
-+ .num_resources = 1,
-+ .resource = &pronghorn_flash_resource,
-+};
-+
-+static struct resource pronghorn_uart_resources [] = {
-+ {
-+ .start = IXP4XX_UART1_BASE_PHYS,
-+ .end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM
-+ },
-+ {
-+ .start = IXP4XX_UART2_BASE_PHYS,
-+ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM
-+ }
-+};
-+
-+static struct plat_serial8250_port pronghorn_uart_data[] = {
-+ {
-+ .mapbase = IXP4XX_UART1_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART1,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ {
-+ .mapbase = IXP4XX_UART2_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART2,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ { },
-+};
-+
-+static struct platform_device pronghorn_uart = {
-+ .name = "serial8250",
-+ .id = PLAT8250_DEV_PLATFORM,
-+ .dev = {
-+ .platform_data = pronghorn_uart_data,
-+ },
-+ .num_resources = 2,
-+ .resource = pronghorn_uart_resources,
-+};
-+
-+static struct i2c_gpio_platform_data pronghorn_i2c_gpio_data = {
-+ .sda_pin = 9,
-+ .scl_pin = 10,
-+};
-+
-+static struct platform_device pronghorn_i2c_gpio = {
-+ .name = "i2c-gpio",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = &pronghorn_i2c_gpio_data,
-+ },
-+};
-+
-+static struct gpio_led pronghorn_led_pin[] = {
-+ {
-+ .name = "pronghorn:green:status",
-+ .gpio = 7,
-+ }
-+};
-+
-+static struct gpio_led_platform_data pronghorn_led_data = {
-+ .num_leds = 1,
-+ .leds = pronghorn_led_pin,
-+};
-+
-+static struct platform_device pronghorn_led = {
-+ .name = "leds-gpio",
-+ .id = -1,
-+ .dev.platform_data = &pronghorn_led_data,
-+};
-+
-+static struct resource pronghorn_pata_resources[] = {
-+ {
-+ .flags = IORESOURCE_MEM
-+ },
-+ {
-+ .flags = IORESOURCE_MEM,
-+ },
-+ {
-+ .name = "intrq",
-+ .start = IRQ_IXP4XX_GPIO0,
-+ .end = IRQ_IXP4XX_GPIO0,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct ixp4xx_pata_data pronghorn_pata_data = {
-+ .cs0_bits = 0xbfff0043,
-+ .cs1_bits = 0xbfff0043,
-+};
-+
-+static struct platform_device pronghorn_pata = {
-+ .name = "pata_ixp4xx_cf",
-+ .id = 0,
-+ .dev.platform_data = &pronghorn_pata_data,
-+ .num_resources = ARRAY_SIZE(pronghorn_pata_resources),
-+ .resource = pronghorn_pata_resources,
-+};
-+
-+static struct eth_plat_info pronghorn_plat_eth[] = {
-+ {
-+ .phy = 0,
-+ .rxq = 3,
-+ .txreadyq = 20,
-+ }, {
-+ .phy = 1,
-+ .rxq = 4,
-+ .txreadyq = 21,
-+ }
-+};
-+
-+static struct platform_device pronghorn_eth[] = {
-+ {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEB,
-+ .dev.platform_data = pronghorn_plat_eth,
-+ }, {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEC,
-+ .dev.platform_data = pronghorn_plat_eth + 1,
-+ }
-+};
-+
-+static struct platform_device *pronghorn_devices[] __initdata = {
-+ &pronghorn_flash,
-+ &pronghorn_uart,
-+ &pronghorn_led,
-+ &pronghorn_eth[0],
-+ &pronghorn_eth[1],
-+};
-+
-+static void __init pronghorn_init(void)
-+{
-+ ixp4xx_sys_init();
-+
-+ pronghorn_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-+ pronghorn_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
-+
-+ *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
-+ *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
-+
-+ platform_add_devices(pronghorn_devices, ARRAY_SIZE(pronghorn_devices));
-+
-+ if (machine_is_pronghorn()) {
-+ pronghorn_pata_resources[0].start = IXP4XX_EXP_BUS_BASE(2);
-+ pronghorn_pata_resources[0].end = IXP4XX_EXP_BUS_END(2);
-+
-+ pronghorn_pata_resources[1].start = IXP4XX_EXP_BUS_BASE(3);
-+ pronghorn_pata_resources[1].end = IXP4XX_EXP_BUS_END(3);
-+
-+ pronghorn_pata_data.cs0_cfg = IXP4XX_EXP_CS2;
-+ pronghorn_pata_data.cs1_cfg = IXP4XX_EXP_CS3;
-+ } else {
-+ pronghorn_pata_resources[0].start = IXP4XX_EXP_BUS_BASE(3);
-+ pronghorn_pata_resources[0].end = IXP4XX_EXP_BUS_END(3);
-+
-+ pronghorn_pata_resources[1].start = IXP4XX_EXP_BUS_BASE(4);
-+ pronghorn_pata_resources[1].end = IXP4XX_EXP_BUS_END(4);
-+
-+ pronghorn_pata_data.cs0_cfg = IXP4XX_EXP_CS3;
-+ pronghorn_pata_data.cs1_cfg = IXP4XX_EXP_CS4;
-+
-+ platform_device_register(&pronghorn_i2c_gpio);
-+ }
-+
-+ platform_device_register(&pronghorn_pata);
-+}
-+
-+MACHINE_START(PRONGHORN, "ADI Engineering Pronghorn")
-+ /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
-+ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
-+ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
-+ .map_io = ixp4xx_map_io,
-+ .init_irq = ixp4xx_init_irq,
-+ .timer = &ixp4xx_timer,
-+ .boot_params = 0x0100,
-+ .init_machine = pronghorn_init,
-+MACHINE_END
-+
-+MACHINE_START(PRONGHORNMETRO, "ADI Engineering Pronghorn Metro")
-+ /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
-+ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
-+ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
-+ .map_io = ixp4xx_map_io,
-+ .init_irq = ixp4xx_init_irq,
-+ .timer = &ixp4xx_timer,
-+ .boot_params = 0x0100,
-+ .init_machine = pronghorn_init,
-+MACHINE_END
---- a/arch/arm/mach-ixp4xx/include/mach/uncompress.h
-+++ b/arch/arm/mach-ixp4xx/include/mach/uncompress.h
-@@ -41,7 +41,8 @@ static __inline__ void __arch_decomp_set
- * Some boards are using UART2 as console
- */
- if (machine_is_adi_coyote() || machine_is_gtwx5715() ||
-- machine_is_gateway7001() || machine_is_wg302v2())
-+ machine_is_gateway7001() || machine_is_wg302v2() ||
-+ machine_is_pronghorn() || machine_is_pronghorn_metro())
- uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS;
- else
- uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;
diff --git a/target/linux/ixp4xx/patches-2.6.33/111-pronghorn_swap_uarts.patch b/target/linux/ixp4xx/patches-2.6.33/111-pronghorn_swap_uarts.patch
deleted file mode 100644
index b9fa50768..000000000
--- a/target/linux/ixp4xx/patches-2.6.33/111-pronghorn_swap_uarts.patch
+++ /dev/null
@@ -1,44 +0,0 @@
---- a/arch/arm/mach-ixp4xx/pronghorn-setup.c
-+++ b/arch/arm/mach-ixp4xx/pronghorn-setup.c
-@@ -51,31 +51,31 @@ static struct platform_device pronghorn_
-
- static struct resource pronghorn_uart_resources [] = {
- {
-- .start = IXP4XX_UART1_BASE_PHYS,
-- .end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
-+ .start = IXP4XX_UART2_BASE_PHYS,
-+ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
- .flags = IORESOURCE_MEM
- },
- {
-- .start = IXP4XX_UART2_BASE_PHYS,
-- .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
-+ .start = IXP4XX_UART1_BASE_PHYS,
-+ .end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
- .flags = IORESOURCE_MEM
- }
- };
-
- static struct plat_serial8250_port pronghorn_uart_data[] = {
- {
-- .mapbase = IXP4XX_UART1_BASE_PHYS,
-- .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
-- .irq = IRQ_IXP4XX_UART1,
-+ .mapbase = IXP4XX_UART2_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART2,
- .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
- .iotype = UPIO_MEM,
- .regshift = 2,
- .uartclk = IXP4XX_UART_XTAL,
- },
- {
-- .mapbase = IXP4XX_UART2_BASE_PHYS,
-- .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-- .irq = IRQ_IXP4XX_UART2,
-+ .mapbase = IXP4XX_UART1_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART1,
- .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
- .iotype = UPIO_MEM,
- .regshift = 2,
diff --git a/target/linux/ixp4xx/patches-2.6.33/115-sidewinder_support.patch b/target/linux/ixp4xx/patches-2.6.33/115-sidewinder_support.patch
deleted file mode 100644
index bad0826c8..000000000
--- a/target/linux/ixp4xx/patches-2.6.33/115-sidewinder_support.patch
+++ /dev/null
@@ -1,282 +0,0 @@
-From 60bdaaaf3446b4237566c6e04855186fc7bd766b Mon Sep 17 00:00:00 2001
-From: Imre Kaloz <kaloz@openwrt.org>
-Date: Sun, 13 Jul 2008 22:46:45 +0200
-Subject: [PATCH] Add support for the ADI Sidewinder
-
-Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
----
- arch/arm/mach-ixp4xx/Kconfig | 10 ++-
- arch/arm/mach-ixp4xx/Makefile | 2 +
- arch/arm/mach-ixp4xx/sidewinder-pci.c | 68 ++++++++++++++
- arch/arm/mach-ixp4xx/sidewinder-setup.c | 151 +++++++++++++++++++++++++++++++
- 4 files changed, 230 insertions(+), 1 deletions(-)
- create mode 100644 arch/arm/mach-ixp4xx/sidewinder-pci.c
- create mode 100644 arch/arm/mach-ixp4xx/sidewinder-setup.c
-
---- a/arch/arm/mach-ixp4xx/Kconfig
-+++ b/arch/arm/mach-ixp4xx/Kconfig
-@@ -81,6 +81,14 @@ config MACH_PRONGHORN
- config MACH_PRONGHORNMETRO
- def_bool MACH_PRONGHORN
-
-+config MACH_SIDEWINDER
-+ bool "ADI Sidewinder"
-+ select PCI
-+ help
-+ Say 'Y' here if you want your kernel to support the ADI
-+ Engineering Sidewinder board. For more information on this
-+ platform, see http://www.adiengineering.com
-+
- config ARCH_IXDP425
- bool "IXDP425"
- help
-@@ -169,7 +177,7 @@ config MACH_FSG
- #
- config CPU_IXP46X
- bool
-- depends on MACH_IXDP465
-+ depends on MACH_IXDP465 || MACH_SIDEWINDER
- default y
-
- config CPU_IXP43X
---- a/arch/arm/mach-ixp4xx/Makefile
-+++ b/arch/arm/mach-ixp4xx/Makefile
-@@ -18,6 +18,7 @@ obj-pci-$(CONFIG_MACH_WG302V1) += wg302
- obj-pci-$(CONFIG_MACH_WG302V2) += wg302v2-pci.o
- obj-pci-$(CONFIG_MACH_FSG) += fsg-pci.o
- obj-pci-$(CONFIG_MACH_PRONGHORN) += pronghorn-pci.o
-+obj-pci-$(CONFIG_MACH_SIDEWINDER) += sidewinder-pci.o
-
- obj-y += common.o
-
-@@ -35,6 +36,7 @@ obj-$(CONFIG_MACH_WG302V2) += wg302v2-se
- obj-$(CONFIG_MACH_FSG) += fsg-setup.o
- obj-$(CONFIG_MACH_GORAMO_MLR) += goramo_mlr.o
- obj-$(CONFIG_MACH_PRONGHORN) += pronghorn-setup.o
-+obj-$(CONFIG_MACH_SIDEWINDER) += sidewinder-setup.o
-
- obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o
- obj-$(CONFIG_IXP4XX_QMGR) += ixp4xx_qmgr.o
---- /dev/null
-+++ b/arch/arm/mach-ixp4xx/sidewinder-pci.c
-@@ -0,0 +1,68 @@
-+/*
-+ * arch/arch/mach-ixp4xx/pronghornmetro-pci.c
-+ *
-+ * PCI setup routines for ADI Engineering Sidewinder
-+ *
-+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * based on coyote-pci.c:
-+ * Copyright (C) 2002 Jungo Software Technologies.
-+ * Copyright (C) 2003 MontaVista Softwrae, Inc.
-+ *
-+ * Maintainer: Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/pci.h>
-+#include <linux/init.h>
-+#include <linux/irq.h>
-+
-+#include <asm/mach-types.h>
-+#include <mach/hardware.h>
-+#include <asm/irq.h>
-+
-+#include <asm/mach/pci.h>
-+
-+void __init sidewinder_pci_preinit(void)
-+{
-+ set_irq_type(IRQ_IXP4XX_GPIO11, IRQ_TYPE_LEVEL_LOW);
-+ set_irq_type(IRQ_IXP4XX_GPIO10, IRQ_TYPE_LEVEL_LOW);
-+ set_irq_type(IRQ_IXP4XX_GPIO9, IRQ_TYPE_LEVEL_LOW);
-+
-+ ixp4xx_pci_preinit();
-+}
-+
-+static int __init sidewinder_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+ if (slot == 1)
-+ return IRQ_IXP4XX_GPIO11;
-+ else if (slot == 2)
-+ return IRQ_IXP4XX_GPIO10;
-+ else if (slot == 3)
-+ return IRQ_IXP4XX_GPIO9;
-+ else
-+ return -1;
-+}
-+
-+struct hw_pci sidewinder_pci __initdata = {
-+ .nr_controllers = 1,
-+ .preinit = sidewinder_pci_preinit,
-+ .swizzle = pci_std_swizzle,
-+ .setup = ixp4xx_setup,
-+ .scan = ixp4xx_scan_bus,
-+ .map_irq = sidewinder_map_irq,
-+};
-+
-+int __init sidewinder_pci_init(void)
-+{
-+ if (machine_is_sidewinder())
-+ pci_common_init(&sidewinder_pci);
-+ return 0;
-+}
-+
-+subsys_initcall(sidewinder_pci_init);
---- /dev/null
-+++ b/arch/arm/mach-ixp4xx/sidewinder-setup.c
-@@ -0,0 +1,149 @@
-+/*
-+ * arch/arm/mach-ixp4xx/sidewinder-setup.c
-+ *
-+ * Board setup for the ADI Engineering Sidewinder
-+ *
-+ * Copyright (C) 2008 Imre Kaloz <Kaloz@openwrt.org>
-+ *
-+ * based on coyote-setup.c:
-+ * Copyright (C) 2003-2005 MontaVista Software, Inc.
-+ *
-+ * Author: Imre Kaloz <Kaloz@openwrt.org>
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/serial.h>
-+#include <linux/serial_8250.h>
-+
-+#include <asm/mach-types.h>
-+#include <asm/mach/arch.h>
-+#include <asm/mach/flash.h>
-+
-+static struct flash_platform_data sidewinder_flash_data = {
-+ .map_name = "cfi_probe",
-+ .width = 2,
-+};
-+
-+static struct resource sidewinder_flash_resource = {
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct platform_device sidewinder_flash = {
-+ .name = "IXP4XX-Flash",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = &sidewinder_flash_data,
-+ },
-+ .num_resources = 1,
-+ .resource = &sidewinder_flash_resource,
-+};
-+
-+static struct resource sidewinder_uart_resources[] = {
-+ {
-+ .start = IXP4XX_UART1_BASE_PHYS,
-+ .end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ {
-+ .start = IXP4XX_UART2_BASE_PHYS,
-+ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM,
-+ }
-+};
-+
-+static struct plat_serial8250_port sidewinder_uart_data[] = {
-+ {
-+ .mapbase = IXP4XX_UART1_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART1,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ {
-+ .mapbase = IXP4XX_UART2_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART2,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ { },
-+};
-+
-+static struct platform_device sidewinder_uart = {
-+ .name = "serial8250",
-+ .id = PLAT8250_DEV_PLATFORM,
-+ .dev = {
-+ .platform_data = sidewinder_uart_data,
-+ },
-+ .num_resources = ARRAY_SIZE(sidewinder_uart_resources),
-+ .resource = sidewinder_uart_resources,
-+};
-+
-+static struct eth_plat_info sidewinder_plat_eth[] = {
-+ {
-+ .phy = 5,
-+ .rxq = 3,
-+ .txreadyq = 20,
-+ }, {
-+ .phy = IXP4XX_ETH_PHY_MAX_ADDR,
-+ .phy_mask = 0x1e,
-+ .rxq = 4,
-+ .txreadyq = 21,
-+ }, {
-+ .phy = 31,
-+ .rxq = 2,
-+ .txreadyq = 19,
-+ }
-+};
-+
-+static struct platform_device sidewinder_eth[] = {
-+ {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEB,
-+ .dev.platform_data = sidewinder_plat_eth,
-+ }, {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEC,
-+ .dev.platform_data = sidewinder_plat_eth + 1,
-+ }, {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEA,
-+ .dev.platform_data = sidewinder_plat_eth + 2,
-+ }
-+};
-+
-+static struct platform_device *sidewinder_devices[] __initdata = {
-+ &sidewinder_flash,
-+ &sidewinder_uart,
-+ &sidewinder_eth[0],
-+ &sidewinder_eth[1],
-+ &sidewinder_eth[2],
-+};
-+
-+static void __init sidewinder_init(void)
-+{
-+ ixp4xx_sys_init();
-+
-+ sidewinder_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-+ sidewinder_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_64M - 1;
-+
-+ *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
-+ *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
-+
-+ platform_add_devices(sidewinder_devices, ARRAY_SIZE(sidewinder_devices));
-+}
-+
-+MACHINE_START(SIDEWINDER, "ADI Engineering Sidewinder")
-+ /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
-+ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
-+ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
-+ .map_io = ixp4xx_map_io,
-+ .init_irq = ixp4xx_init_irq,
-+ .timer = &ixp4xx_timer,
-+ .boot_params = 0x0100,
-+ .init_machine = sidewinder_init,
-+MACHINE_END
diff --git a/target/linux/ixp4xx/patches-2.6.33/116-sidewinder_fis_location.patch b/target/linux/ixp4xx/patches-2.6.33/116-sidewinder_fis_location.patch
deleted file mode 100644
index 1d0a98398..000000000
--- a/target/linux/ixp4xx/patches-2.6.33/116-sidewinder_fis_location.patch
+++ /dev/null
@@ -1,30 +0,0 @@
---- a/drivers/mtd/redboot.c
-+++ b/drivers/mtd/redboot.c
-@@ -13,6 +13,8 @@
-
- #define BOARD_CONFIG_PART "boardconfig"
-
-+#include <asm/mach-types.h>
-+
- struct fis_image_desc {
- unsigned char name[16]; // Null terminated name
- uint32_t flash_base; // Address within FLASH of image
-@@ -30,7 +32,8 @@ struct fis_list {
- struct fis_list *next;
- };
-
--static int directory = CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK;
-+int directory = CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK;
-+
- module_param(directory, int, 0);
-
- static inline int redboot_checksum(struct fis_image_desc *img)
-@@ -59,6 +62,8 @@ static int parse_redboot_partitions(stru
- #ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED
- static char nullstring[] = "unallocated";
- #endif
-+ if (machine_is_sidewinder())
-+ directory = -5;
-
- if ( directory < 0 ) {
- offset = master->size + directory * master->erasesize;
diff --git a/target/linux/ixp4xx/patches-2.6.33/120-compex_support.patch b/target/linux/ixp4xx/patches-2.6.33/120-compex_support.patch
deleted file mode 100644
index 3a26afec6..000000000
--- a/target/linux/ixp4xx/patches-2.6.33/120-compex_support.patch
+++ /dev/null
@@ -1,212 +0,0 @@
-From 24025a2dcf1248079dd3019fac6ed955252d277f Mon Sep 17 00:00:00 2001
-From: Imre Kaloz <kaloz@openwrt.org>
-Date: Mon, 14 Jul 2008 21:56:34 +0200
-Subject: [PATCH] Add support for the Compex WP18 / NP18A boards
-
-Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
----
- arch/arm/mach-ixp4xx/Kconfig | 8 ++
- arch/arm/mach-ixp4xx/Makefile | 2 +
- arch/arm/mach-ixp4xx/compex-setup.c | 136 +++++++++++++++++++++++++++++++++++
- arch/arm/mach-ixp4xx/ixdp425-pci.c | 3 +-
- arch/arm/tools/mach-types | 2 +-
- 5 files changed, 149 insertions(+), 2 deletions(-)
- create mode 100644 arch/arm/mach-ixp4xx/compex-setup.c
-
---- a/arch/arm/mach-ixp4xx/Kconfig
-+++ b/arch/arm/mach-ixp4xx/Kconfig
-@@ -89,6 +89,14 @@ config MACH_SIDEWINDER
- Engineering Sidewinder board. For more information on this
- platform, see http://www.adiengineering.com
-
-+config MACH_COMPEX
-+ bool "Compex WP18 / NP18A"
-+ select PCI
-+ help
-+ Say 'Y' here if you want your kernel to support Compex'
-+ WP18 or NP18A boards. For more information on this
-+ platform, see http://www.compex.com.sg/home/OEM/product_ap.htm
-+
- config ARCH_IXDP425
- bool "IXDP425"
- help
---- a/arch/arm/mach-ixp4xx/Makefile
-+++ b/arch/arm/mach-ixp4xx/Makefile
-@@ -19,6 +19,7 @@ obj-pci-$(CONFIG_MACH_WG302V2) += wg302
- obj-pci-$(CONFIG_MACH_FSG) += fsg-pci.o
- obj-pci-$(CONFIG_MACH_PRONGHORN) += pronghorn-pci.o
- obj-pci-$(CONFIG_MACH_SIDEWINDER) += sidewinder-pci.o
-+obj-pci-$(CONFIG_MACH_COMPEX) += ixdp425-pci.o
-
- obj-y += common.o
-
-@@ -37,6 +38,7 @@ obj-$(CONFIG_MACH_FSG) += fsg-setup.o
- obj-$(CONFIG_MACH_GORAMO_MLR) += goramo_mlr.o
- obj-$(CONFIG_MACH_PRONGHORN) += pronghorn-setup.o
- obj-$(CONFIG_MACH_SIDEWINDER) += sidewinder-setup.o
-+obj-$(CONFIG_MACH_COMPEX) += compex-setup.o
-
- obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o
- obj-$(CONFIG_IXP4XX_QMGR) += ixp4xx_qmgr.o
---- /dev/null
-+++ b/arch/arm/mach-ixp4xx/compex-setup.c
-@@ -0,0 +1,136 @@
-+/*
-+ * arch/arm/mach-ixp4xx/compex-setup.c
-+ *
-+ * Compex WP18 / NP18A board-setup
-+ *
-+ * Copyright (C) 2008 Imre Kaloz <Kaloz@openwrt.org>
-+ *
-+ * based on coyote-setup.c:
-+ * Copyright (C) 2003-2005 MontaVista Software, Inc.
-+ *
-+ * Author: Imre Kaloz <Kaloz@openwrt.org>
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/serial.h>
-+#include <linux/serial_8250.h>
-+
-+#include <asm/mach-types.h>
-+#include <asm/mach/arch.h>
-+#include <asm/mach/flash.h>
-+
-+static struct flash_platform_data compex_flash_data = {
-+ .map_name = "cfi_probe",
-+ .width = 2,
-+};
-+
-+static struct resource compex_flash_resource = {
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct platform_device compex_flash = {
-+ .name = "IXP4XX-Flash",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = &compex_flash_data,
-+ },
-+ .num_resources = 1,
-+ .resource = &compex_flash_resource,
-+};
-+
-+static struct resource compex_uart_resources[] = {
-+ {
-+ .start = IXP4XX_UART1_BASE_PHYS,
-+ .end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM
-+ },
-+ {
-+ .start = IXP4XX_UART2_BASE_PHYS,
-+ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM
-+ }
-+};
-+
-+static struct plat_serial8250_port compex_uart_data[] = {
-+ {
-+ .mapbase = IXP4XX_UART1_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART1,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ {
-+ .mapbase = IXP4XX_UART2_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART2,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ { },
-+};
-+
-+static struct platform_device compex_uart = {
-+ .name = "serial8250",
-+ .id = PLAT8250_DEV_PLATFORM,
-+ .dev.platform_data = compex_uart_data,
-+ .num_resources = 2,
-+ .resource = compex_uart_resources,
-+};
-+
-+static struct eth_plat_info compex_plat_eth[] = {
-+ {
-+ .phy = IXP4XX_ETH_PHY_MAX_ADDR,
-+ .phy_mask = 0xf0000,
-+ .rxq = 3,
-+ .txreadyq = 20,
-+ }, {
-+ .phy = 3,
-+ .rxq = 4,
-+ .txreadyq = 21,
-+ }
-+};
-+
-+static struct platform_device compex_eth[] = {
-+ {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEB,
-+ .dev.platform_data = compex_plat_eth,
-+ }, {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEC,
-+ .dev.platform_data = compex_plat_eth + 1,
-+ }
-+};
-+
-+static struct platform_device *compex_devices[] __initdata = {
-+ &compex_flash,
-+ &compex_uart,
-+ &compex_eth[0],
-+ &compex_eth[1],
-+};
-+
-+static void __init compex_init(void)
-+{
-+ ixp4xx_sys_init();
-+
-+ compex_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-+ compex_flash_resource.end =
-+ IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
-+
-+ platform_add_devices(compex_devices, ARRAY_SIZE(compex_devices));
-+}
-+
-+MACHINE_START(COMPEX, "Compex WP18 / NP18A")
-+ /* Maintainer: Imre Kaloz <Kaloz@openwrt.org> */
-+ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
-+ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
-+ .map_io = ixp4xx_map_io,
-+ .init_irq = ixp4xx_init_irq,
-+ .timer = &ixp4xx_timer,
-+ .boot_params = 0x0100,
-+ .init_machine = compex_init,
-+MACHINE_END
---- a/arch/arm/mach-ixp4xx/ixdp425-pci.c
-+++ b/arch/arm/mach-ixp4xx/ixdp425-pci.c
-@@ -70,7 +70,8 @@ struct hw_pci ixdp425_pci __initdata = {
- int __init ixdp425_pci_init(void)
- {
- if (machine_is_ixdp425() || machine_is_ixcdp1100() ||
-- machine_is_ixdp465() || machine_is_kixrp435())
-+ machine_is_ixdp465() || machine_is_kixrp435() ||
-+ machine_is_compex())
- pci_common_init(&ixdp425_pci);
- return 0;
- }
---- a/arch/arm/tools/mach-types
-+++ b/arch/arm/tools/mach-types
-@@ -1273,7 +1273,7 @@ oiab MACH_OIAB OIAB 1269
- smdk6400 MACH_SMDK6400 SMDK6400 1270
- nokia_n800 MACH_NOKIA_N800 NOKIA_N800 1271
- greenphone MACH_GREENPHONE GREENPHONE 1272
--compex42x MACH_COMPEXWP18 COMPEXWP18 1273
-+compex MACH_COMPEX COMPEX 1273
- xmate MACH_XMATE XMATE 1274
- energizer MACH_ENERGIZER ENERGIZER 1275
- ime1 MACH_IME1 IME1 1276
diff --git a/target/linux/ixp4xx/patches-2.6.33/130-wrt300nv2_support.patch b/target/linux/ixp4xx/patches-2.6.33/130-wrt300nv2_support.patch
deleted file mode 100644
index c184a6c6c..000000000
--- a/target/linux/ixp4xx/patches-2.6.33/130-wrt300nv2_support.patch
+++ /dev/null
@@ -1,225 +0,0 @@
---- a/arch/arm/mach-ixp4xx/Kconfig
-+++ b/arch/arm/mach-ixp4xx/Kconfig
-@@ -97,6 +97,14 @@ config MACH_COMPEX
- WP18 or NP18A boards. For more information on this
- platform, see http://www.compex.com.sg/home/OEM/product_ap.htm
-
-+config MACH_WRT300NV2
-+ bool "Linksys WRT300N v2"
-+ select PCI
-+ help
-+ Say 'Y' here if you want your kernel to support Linksys'
-+ WRT300N v2 router. For more information on this
-+ platform, see http://openwrt.org
-+
- config ARCH_IXDP425
- bool "IXDP425"
- help
---- a/arch/arm/mach-ixp4xx/Makefile
-+++ b/arch/arm/mach-ixp4xx/Makefile
-@@ -20,6 +20,7 @@ obj-pci-$(CONFIG_MACH_FSG) += fsg-pci.o
- obj-pci-$(CONFIG_MACH_PRONGHORN) += pronghorn-pci.o
- obj-pci-$(CONFIG_MACH_SIDEWINDER) += sidewinder-pci.o
- obj-pci-$(CONFIG_MACH_COMPEX) += ixdp425-pci.o
-+obj-pci-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-pci.o
-
- obj-y += common.o
-
-@@ -39,6 +40,7 @@ obj-$(CONFIG_MACH_GORAMO_MLR) += goramo_
- obj-$(CONFIG_MACH_PRONGHORN) += pronghorn-setup.o
- obj-$(CONFIG_MACH_SIDEWINDER) += sidewinder-setup.o
- obj-$(CONFIG_MACH_COMPEX) += compex-setup.o
-+obj-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-setup.o
-
- obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o
- obj-$(CONFIG_IXP4XX_QMGR) += ixp4xx_qmgr.o
---- /dev/null
-+++ b/arch/arm/mach-ixp4xx/wrt300nv2-pci.c
-@@ -0,0 +1,65 @@
-+/*
-+ * arch/arch/mach-ixp4xx/wrt300nv2-pci.c
-+ *
-+ * PCI setup routines for Linksys WRT300N v2
-+ *
-+ * Copyright (C) 2007 Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * based on coyote-pci.c:
-+ * Copyright (C) 2002 Jungo Software Technologies.
-+ * Copyright (C) 2003 MontaVista Softwrae, Inc.
-+ *
-+ * Maintainer: Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/pci.h>
-+#include <linux/init.h>
-+#include <linux/irq.h>
-+
-+#include <asm/mach-types.h>
-+#include <mach/hardware.h>
-+#include <asm/irq.h>
-+
-+#include <asm/mach/pci.h>
-+
-+extern void ixp4xx_pci_preinit(void);
-+extern int ixp4xx_setup(int nr, struct pci_sys_data *sys);
-+extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys);
-+
-+void __init wrt300nv2_pci_preinit(void)
-+{
-+ set_irq_type(IRQ_IXP4XX_GPIO8, IRQ_TYPE_LEVEL_LOW);
-+
-+ ixp4xx_pci_preinit();
-+}
-+
-+static int __init wrt300nv2_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+ if (slot == 1)
-+ return IRQ_IXP4XX_GPIO8;
-+ else return -1;
-+}
-+
-+struct hw_pci wrt300nv2_pci __initdata = {
-+ .nr_controllers = 1,
-+ .preinit = wrt300nv2_pci_preinit,
-+ .swizzle = pci_std_swizzle,
-+ .setup = ixp4xx_setup,
-+ .scan = ixp4xx_scan_bus,
-+ .map_irq = wrt300nv2_map_irq,
-+};
-+
-+int __init wrt300nv2_pci_init(void)
-+{
-+ if (machine_is_wrt300nv2())
-+ pci_common_init(&wrt300nv2_pci);
-+ return 0;
-+}
-+
-+subsys_initcall(wrt300nv2_pci_init);
---- /dev/null
-+++ b/arch/arm/mach-ixp4xx/wrt300nv2-setup.c
-@@ -0,0 +1,108 @@
-+/*
-+ * arch/arm/mach-ixp4xx/wrt300nv2-setup.c
-+ *
-+ * Board setup for the Linksys WRT300N v2
-+ *
-+ * Copyright (C) 2007 Imre Kaloz <Kaloz@openwrt.org>
-+ *
-+ * based on coyote-setup.c:
-+ * Copyright (C) 2003-2005 MontaVista Software, Inc.
-+ *
-+ * Author: Imre Kaloz <Kaloz@openwrt.org>
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/device.h>
-+#include <linux/serial.h>
-+#include <linux/tty.h>
-+#include <linux/serial_8250.h>
-+#include <linux/slab.h>
-+
-+#include <asm/types.h>
-+#include <asm/setup.h>
-+#include <asm/memory.h>
-+#include <mach/hardware.h>
-+#include <asm/irq.h>
-+#include <asm/mach-types.h>
-+#include <asm/mach/arch.h>
-+#include <asm/mach/flash.h>
-+
-+static struct flash_platform_data wrt300nv2_flash_data = {
-+ .map_name = "cfi_probe",
-+ .width = 2,
-+};
-+
-+static struct resource wrt300nv2_flash_resource = {
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct platform_device wrt300nv2_flash = {
-+ .name = "IXP4XX-Flash",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = &wrt300nv2_flash_data,
-+ },
-+ .num_resources = 1,
-+ .resource = &wrt300nv2_flash_resource,
-+};
-+
-+static struct resource wrt300nv2_uart_resource = {
-+ .start = IXP4XX_UART2_BASE_PHYS,
-+ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct plat_serial8250_port wrt300nv2_uart_data[] = {
-+ {
-+ .mapbase = IXP4XX_UART2_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART2,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ { },
-+};
-+
-+static struct platform_device wrt300nv2_uart = {
-+ .name = "serial8250",
-+ .id = PLAT8250_DEV_PLATFORM,
-+ .dev = {
-+ .platform_data = wrt300nv2_uart_data,
-+ },
-+ .num_resources = 1,
-+ .resource = &wrt300nv2_uart_resource,
-+};
-+
-+static struct platform_device *wrt300nv2_devices[] __initdata = {
-+ &wrt300nv2_flash,
-+ &wrt300nv2_uart
-+};
-+
-+static void __init wrt300nv2_init(void)
-+{
-+ ixp4xx_sys_init();
-+
-+ wrt300nv2_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-+ wrt300nv2_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
-+
-+ *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
-+ *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
-+
-+ platform_add_devices(wrt300nv2_devices, ARRAY_SIZE(wrt300nv2_devices));
-+}
-+
-+#ifdef CONFIG_MACH_WRT300NV2
-+MACHINE_START(WRT300NV2, "Linksys WRT300N v2")
-+ /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
-+ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
-+ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
-+ .map_io = ixp4xx_map_io,
-+ .init_irq = ixp4xx_init_irq,
-+ .timer = &ixp4xx_timer,
-+ .boot_params = 0x0100,
-+ .init_machine = wrt300nv2_init,
-+MACHINE_END
-+#endif
---- a/arch/arm/mach-ixp4xx/include/mach/uncompress.h
-+++ b/arch/arm/mach-ixp4xx/include/mach/uncompress.h
-@@ -42,7 +42,7 @@ static __inline__ void __arch_decomp_set
- */
- if (machine_is_adi_coyote() || machine_is_gtwx5715() ||
- machine_is_gateway7001() || machine_is_wg302v2() ||
-- machine_is_pronghorn() || machine_is_pronghorn_metro())
-+ machine_is_pronghorn() || machine_is_pronghorn_metro() || machine_is_wrt300nv2())
- uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS;
- else
- uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;
diff --git a/target/linux/ixp4xx/patches-2.6.33/131-wrt300nv2_mac_plat_info.patch b/target/linux/ixp4xx/patches-2.6.33/131-wrt300nv2_mac_plat_info.patch
deleted file mode 100644
index 3ab68c4f3..000000000
--- a/target/linux/ixp4xx/patches-2.6.33/131-wrt300nv2_mac_plat_info.patch
+++ /dev/null
@@ -1,40 +0,0 @@
---- a/arch/arm/mach-ixp4xx/wrt300nv2-setup.c
-+++ b/arch/arm/mach-ixp4xx/wrt300nv2-setup.c
-@@ -76,9 +76,36 @@ static struct platform_device wrt300nv2_
- .resource = &wrt300nv2_uart_resource,
- };
-
-+/* Built-in 10/100 Ethernet MAC interfaces */
-+static struct eth_plat_info wrt300nv2_plat_eth[] = {
-+ {
-+ .phy = -1,
-+ .rxq = 3,
-+ .txreadyq = 20,
-+ }, {
-+ .phy = 1,
-+ .rxq = 4,
-+ .txreadyq = 21,
-+ }
-+};
-+
-+static struct platform_device wrt300nv2_eth[] = {
-+ {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEB,
-+ .dev.platform_data = wrt300nv2_plat_eth,
-+ }, {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEC,
-+ .dev.platform_data = wrt300nv2_plat_eth + 1,
-+ }
-+};
-+
- static struct platform_device *wrt300nv2_devices[] __initdata = {
- &wrt300nv2_flash,
-- &wrt300nv2_uart
-+ &wrt300nv2_uart,
-+ &wrt300nv2_eth[0],
-+ &wrt300nv2_eth[1],
- };
-
- static void __init wrt300nv2_init(void)
diff --git a/target/linux/ixp4xx/patches-2.6.33/132-wrt300nv2_mac_fix.patch b/target/linux/ixp4xx/patches-2.6.33/132-wrt300nv2_mac_fix.patch
deleted file mode 100644
index cc891e248..000000000
--- a/target/linux/ixp4xx/patches-2.6.33/132-wrt300nv2_mac_fix.patch
+++ /dev/null
@@ -1,71 +0,0 @@
---- a/arch/arm/mach-ixp4xx/wrt300nv2-setup.c
-+++ b/arch/arm/mach-ixp4xx/wrt300nv2-setup.c
-@@ -3,6 +3,7 @@
- *
- * Board setup for the Linksys WRT300N v2
- *
-+ * Copyright (C) 2010 Alexandros C. Couloumbis <alex@ozo.com>
- * Copyright (C) 2007 Imre Kaloz <Kaloz@openwrt.org>
- *
- * based on coyote-setup.c:
-@@ -18,6 +19,7 @@
- #include <linux/tty.h>
- #include <linux/serial_8250.h>
- #include <linux/slab.h>
-+#include <linux/etherdevice.h>
-
- #include <asm/types.h>
- #include <asm/setup.h>
-@@ -79,7 +81,8 @@ static struct platform_device wrt300nv2_
- /* Built-in 10/100 Ethernet MAC interfaces */
- static struct eth_plat_info wrt300nv2_plat_eth[] = {
- {
-- .phy = -1,
-+ .phy = IXP4XX_ETH_PHY_MAX_ADDR,
-+ .phy_mask = 0x0F0000,
- .rxq = 3,
- .txreadyq = 20,
- }, {
-@@ -111,6 +114,9 @@ static struct platform_device *wrt300nv2
- static void __init wrt300nv2_init(void)
- {
- ixp4xx_sys_init();
-+ uint8_t __iomem *f;
-+ int offset = 0;
-+ int i;
-
- wrt300nv2_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
- wrt300nv2_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
-@@ -119,6 +125,32 @@ static void __init wrt300nv2_init(void)
- *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
-
- platform_add_devices(wrt300nv2_devices, ARRAY_SIZE(wrt300nv2_devices));
-+
-+ f = ioremap(IXP4XX_EXP_BUS_BASE(0), 0x60000);
-+
-+ if (f) {
-+ for (i = 0; i < 6; i++) {
-+#ifdef __ARMEB__
-+ wrt300nv2_plat_eth[0].hwaddr[i] = readb(f + 0x5FFA0 + i);
-+ if (i == 5)
-+ offset = 1;
-+ wrt300nv2_plat_eth[1].hwaddr[i] = (wrt300nv2_plat_eth[0].hwaddr[i] + offset);
-+#else
-+ wrt300nv2_plat_eth[0].hwaddr[i] = readb(f + 0x5FFA0 + (i^3));
-+ if (i == 5)
-+ offset = 1;
-+ wrt300nv2_plat_eth[1].hwaddr[i] = (wrt300nv2_plat_eth[0].hwaddr[i] + offset);
-+#endif
-+ }
-+ iounmap(f);
-+ }
-+
-+ if (!(is_valid_ether_addr(wrt300nv2_plat_eth[0].hwaddr)))
-+ random_ether_addr(wrt300nv2_plat_eth[0].hwaddr);
-+ if (!(is_valid_ether_addr(wrt300nv2_plat_eth[1].hwaddr))) {
-+ memcpy(wrt300nv2_plat_eth[1].hwaddr, wrt300nv2_plat_eth[0].hwaddr, ETH_ALEN);
-+ wrt300nv2_plat_eth[1].hwaddr[5] = (wrt300nv2_plat_eth[0].hwaddr[5] + 1);
-+ }
- }
-
- #ifdef CONFIG_MACH_WRT300NV2
diff --git a/target/linux/ixp4xx/patches-2.6.33/150-lanready_ap1000_support.patch b/target/linux/ixp4xx/patches-2.6.33/150-lanready_ap1000_support.patch
deleted file mode 100644
index 1dd31e70e..000000000
--- a/target/linux/ixp4xx/patches-2.6.33/150-lanready_ap1000_support.patch
+++ /dev/null
@@ -1,200 +0,0 @@
---- /dev/null
-+++ b/arch/arm/mach-ixp4xx/ap1000-setup.c
-@@ -0,0 +1,151 @@
-+/*
-+ * arch/arm/mach-ixp4xx/ap1000-setup.c
-+ *
-+ * Lanready AP-1000
-+ *
-+ * Copyright (C) 2007 Imre Kaloz <Kaloz@openwrt.org>
-+ *
-+ * based on ixdp425-setup.c:
-+ * Copyright (C) 2003-2005 MontaVista Software, Inc.
-+ *
-+ * Author: Imre Kaloz <Kaloz@openwrt.org>
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/device.h>
-+#include <linux/serial.h>
-+#include <linux/tty.h>
-+#include <linux/serial_8250.h>
-+#include <linux/slab.h>
-+
-+#include <asm/types.h>
-+#include <asm/setup.h>
-+#include <asm/memory.h>
-+#include <mach/hardware.h>
-+#include <asm/mach-types.h>
-+#include <asm/irq.h>
-+#include <asm/mach/arch.h>
-+#include <asm/mach/flash.h>
-+
-+static struct flash_platform_data ap1000_flash_data = {
-+ .map_name = "cfi_probe",
-+ .width = 2,
-+};
-+
-+static struct resource ap1000_flash_resource = {
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct platform_device ap1000_flash = {
-+ .name = "IXP4XX-Flash",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = &ap1000_flash_data,
-+ },
-+ .num_resources = 1,
-+ .resource = &ap1000_flash_resource,
-+};
-+
-+static struct resource ap1000_uart_resources[] = {
-+ {
-+ .start = IXP4XX_UART1_BASE_PHYS,
-+ .end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM
-+ },
-+ {
-+ .start = IXP4XX_UART2_BASE_PHYS,
-+ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM
-+ }
-+};
-+
-+static struct plat_serial8250_port ap1000_uart_data[] = {
-+ {
-+ .mapbase = IXP4XX_UART1_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART1,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ {
-+ .mapbase = IXP4XX_UART2_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART2,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ { },
-+};
-+
-+static struct platform_device ap1000_uart = {
-+ .name = "serial8250",
-+ .id = PLAT8250_DEV_PLATFORM,
-+ .dev.platform_data = ap1000_uart_data,
-+ .num_resources = 2,
-+ .resource = ap1000_uart_resources
-+};
-+
-+static struct platform_device *ap1000_devices[] __initdata = {
-+ &ap1000_flash,
-+ &ap1000_uart
-+};
-+
-+static char ap1000_mem_fixup[] __initdata = "mem=64M ";
-+
-+static void __init ap1000_fixup(struct machine_desc *desc,
-+ struct tag *tags, char **cmdline, struct meminfo *mi)
-+
-+{
-+ struct tag *t = tags;
-+ char *p = *cmdline;
-+
-+ /* Find the end of the tags table, taking note of any cmdline tag. */
-+ for (; t->hdr.size; t = tag_next(t)) {
-+ if (t->hdr.tag == ATAG_CMDLINE) {
-+ p = t->u.cmdline.cmdline;
-+ }
-+ }
-+
-+ /* Overwrite the end of the table with a new cmdline tag. */
-+ t->hdr.tag = ATAG_CMDLINE;
-+ t->hdr.size = (sizeof (struct tag_header) +
-+ strlen(ap1000_mem_fixup) + strlen(p) + 1 + 4) >> 2;
-+ strlcpy(t->u.cmdline.cmdline, ap1000_mem_fixup, COMMAND_LINE_SIZE);
-+ strlcpy(t->u.cmdline.cmdline + strlen(ap1000_mem_fixup), p,
-+ COMMAND_LINE_SIZE - strlen(ap1000_mem_fixup));
-+
-+ /* Terminate the table. */
-+ t = tag_next(t);
-+ t->hdr.tag = ATAG_NONE;
-+ t->hdr.size = 0;
-+}
-+
-+static void __init ap1000_init(void)
-+{
-+ ixp4xx_sys_init();
-+
-+ ap1000_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-+ ap1000_flash_resource.end =
-+ IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
-+
-+ platform_add_devices(ap1000_devices, ARRAY_SIZE(ap1000_devices));
-+}
-+
-+#ifdef CONFIG_MACH_AP1000
-+MACHINE_START(AP1000, "Lanready AP-1000")
-+ /* Maintainer: Imre Kaloz <Kaloz@openwrt.org> */
-+ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
-+ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
-+ .fixup = ap1000_fixup,
-+ .map_io = ixp4xx_map_io,
-+ .init_irq = ixp4xx_init_irq,
-+ .timer = &ixp4xx_timer,
-+ .boot_params = 0x0100,
-+ .init_machine = ap1000_init,
-+MACHINE_END
-+#endif
---- a/arch/arm/mach-ixp4xx/ixdp425-pci.c
-+++ b/arch/arm/mach-ixp4xx/ixdp425-pci.c
-@@ -71,7 +71,7 @@ int __init ixdp425_pci_init(void)
- {
- if (machine_is_ixdp425() || machine_is_ixcdp1100() ||
- machine_is_ixdp465() || machine_is_kixrp435() ||
-- machine_is_compex())
-+ machine_is_compex() || machine_is_ap1000())
- pci_common_init(&ixdp425_pci);
- return 0;
- }
---- a/arch/arm/mach-ixp4xx/Kconfig
-+++ b/arch/arm/mach-ixp4xx/Kconfig
-@@ -105,6 +105,14 @@ config MACH_WRT300NV2
- WRT300N v2 router. For more information on this
- platform, see http://openwrt.org
-
-+config MACH_AP1000
-+ bool "Lanready AP-1000"
-+ select PCI
-+ help
-+ Say 'Y' here if you want your kernel to support Lanready's
-+ AP1000 board. For more information on this
-+ platform, see http://openwrt.org
-+
- config ARCH_IXDP425
- bool "IXDP425"
- help
---- a/arch/arm/mach-ixp4xx/Makefile
-+++ b/arch/arm/mach-ixp4xx/Makefile
-@@ -21,6 +21,7 @@ obj-pci-$(CONFIG_MACH_PRONGHORN) += pron
- obj-pci-$(CONFIG_MACH_SIDEWINDER) += sidewinder-pci.o
- obj-pci-$(CONFIG_MACH_COMPEX) += ixdp425-pci.o
- obj-pci-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-pci.o
-+obj-pci-$(CONFIG_MACH_AP1000) += ixdp425-pci.o
-
- obj-y += common.o
-
-@@ -41,6 +42,7 @@ obj-$(CONFIG_MACH_PRONGHORN) += pronghor
- obj-$(CONFIG_MACH_SIDEWINDER) += sidewinder-setup.o
- obj-$(CONFIG_MACH_COMPEX) += compex-setup.o
- obj-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-setup.o
-+obj-$(CONFIG_MACH_AP1000) += ap1000-setup.o
-
- obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o
- obj-$(CONFIG_IXP4XX_QMGR) += ixp4xx_qmgr.o
diff --git a/target/linux/ixp4xx/patches-2.6.33/151-lanready_ap1000_mac_plat_info.patch b/target/linux/ixp4xx/patches-2.6.33/151-lanready_ap1000_mac_plat_info.patch
deleted file mode 100644
index a1214d567..000000000
--- a/target/linux/ixp4xx/patches-2.6.33/151-lanready_ap1000_mac_plat_info.patch
+++ /dev/null
@@ -1,41 +0,0 @@
---- a/arch/arm/mach-ixp4xx/ap1000-setup.c
-+++ b/arch/arm/mach-ixp4xx/ap1000-setup.c
-@@ -90,9 +90,37 @@ static struct platform_device ap1000_uar
- .resource = ap1000_uart_resources
- };
-
-+/* Built-in 10/100 Ethernet MAC interfaces */
-+static struct eth_plat_info ap1000_plat_eth[] = {
-+ {
-+ .phy = IXP4XX_ETH_PHY_MAX_ADDR,
-+ .phy_mask = 0x1e,
-+ .rxq = 3,
-+ .txreadyq = 20,
-+ }, {
-+ .phy = 5,
-+ .rxq = 4,
-+ .txreadyq = 21,
-+ }
-+};
-+
-+static struct platform_device ap1000_eth[] = {
-+ {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEB,
-+ .dev.platform_data = ap1000_plat_eth,
-+ }, {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEC,
-+ .dev.platform_data = ap1000_plat_eth + 1,
-+ }
-+};
-+
- static struct platform_device *ap1000_devices[] __initdata = {
- &ap1000_flash,
-- &ap1000_uart
-+ &ap1000_uart,
-+ &ap1000_eth[0],
-+ &ap1000_eth[1],
- };
-
- static char ap1000_mem_fixup[] __initdata = "mem=64M ";
diff --git a/target/linux/ixp4xx/patches-2.6.33/162-wg302v1_mem_fixup.patch b/target/linux/ixp4xx/patches-2.6.33/162-wg302v1_mem_fixup.patch
deleted file mode 100644
index 684db4475..000000000
--- a/target/linux/ixp4xx/patches-2.6.33/162-wg302v1_mem_fixup.patch
+++ /dev/null
@@ -1,47 +0,0 @@
---- a/arch/arm/mach-ixp4xx/wg302v1-setup.c
-+++ b/arch/arm/mach-ixp4xx/wg302v1-setup.c
-@@ -115,6 +115,36 @@ static struct platform_device *wg302v1_d
- &wg302v1_eth[0],
- };
-
-+static char wg302v1_mem_fixup[] __initdata = "mem=32M ";
-+
-+static void __init wg302v1_fixup(struct machine_desc *desc,
-+ struct tag *tags, char **cmdline, struct meminfo *mi)
-+
-+{
-+ struct tag *t = tags;
-+ char *p = *cmdline;
-+
-+ /* Find the end of the tags table, taking note of any cmdline tag. */
-+ for (; t->hdr.size; t = tag_next(t)) {
-+ if (t->hdr.tag == ATAG_CMDLINE) {
-+ p = t->u.cmdline.cmdline;
-+ }
-+ }
-+
-+ /* Overwrite the end of the table with a new cmdline tag. */
-+ t->hdr.tag = ATAG_CMDLINE;
-+ t->hdr.size = (sizeof (struct tag_header) +
-+ strlen(wg302v1_mem_fixup) + strlen(p) + 1 + 4) >> 2;
-+ strlcpy(t->u.cmdline.cmdline, wg302v1_mem_fixup, COMMAND_LINE_SIZE);
-+ strlcpy(t->u.cmdline.cmdline + strlen(wg302v1_mem_fixup), p,
-+ COMMAND_LINE_SIZE - strlen(wg302v1_mem_fixup));
-+
-+ /* Terminate the table. */
-+ t = tag_next(t);
-+ t->hdr.tag = ATAG_NONE;
-+ t->hdr.size = 0;
-+}
-+
- static void __init wg302v1_init(void)
- {
- ixp4xx_sys_init();
-@@ -133,6 +163,7 @@ MACHINE_START(WG302V1, "Netgear WG302 v1
- /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
- .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
- .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
-+ .fixup = wg302v1_fixup,
- .map_io = ixp4xx_map_io,
- .init_irq = ixp4xx_init_irq,
- .timer = &ixp4xx_timer,
diff --git a/target/linux/ixp4xx/patches-2.6.33/170-ixdpg425_mac_plat_info.patch b/target/linux/ixp4xx/patches-2.6.33/170-ixdpg425_mac_plat_info.patch
deleted file mode 100644
index 279f4c65f..000000000
--- a/target/linux/ixp4xx/patches-2.6.33/170-ixdpg425_mac_plat_info.patch
+++ /dev/null
@@ -1,41 +0,0 @@
---- a/arch/arm/mach-ixp4xx/coyote-setup.c
-+++ b/arch/arm/mach-ixp4xx/coyote-setup.c
-@@ -82,9 +82,37 @@ static struct platform_device coyote_uar
- .resource = &coyote_uart_resource,
- };
-
-+/* Built-in 10/100 Ethernet MAC interfaces */
-+static struct eth_plat_info ixdpg425_plat_eth[] = {
-+ {
-+ .phy = 5,
-+ .rxq = 3,
-+ .txreadyq = 20,
-+ }, {
-+ .phy = 4,
-+ .rxq = 4,
-+ .txreadyq = 21,
-+ }
-+};
-+
-+static struct platform_device ixdpg425_eth[] = {
-+ {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEB,
-+ .dev.platform_data = ixdpg425_plat_eth,
-+ }, {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEC,
-+ .dev.platform_data = ixdpg425_plat_eth + 1,
-+ }
-+};
-+
-+
- static struct platform_device *coyote_devices[] __initdata = {
- &coyote_flash,
-- &coyote_uart
-+ &coyote_uart,
-+ &ixdpg425_eth[0],
-+ &ixdpg425_eth[1],
- };
-
- static void __init coyote_init(void)
diff --git a/target/linux/ixp4xx/patches-2.6.33/180-tw5334_support.patch b/target/linux/ixp4xx/patches-2.6.33/180-tw5334_support.patch
deleted file mode 100644
index 6370c9983..000000000
--- a/target/linux/ixp4xx/patches-2.6.33/180-tw5334_support.patch
+++ /dev/null
@@ -1,284 +0,0 @@
---- a/arch/arm/mach-ixp4xx/Kconfig
-+++ b/arch/arm/mach-ixp4xx/Kconfig
-@@ -164,6 +164,14 @@ config ARCH_PRPMC1100
- PrPCM1100 Processor Mezanine Module. For more information on
- this platform, see <file:Documentation/arm/IXP4xx>.
-
-+config MACH_TW5334
-+ bool "Titan Wireless TW-533-4"
-+ select PCI
-+ help
-+ Say 'Y' here if you want your kernel to support the Titan
-+ Wireless TW533-4. For more information on this platform,
-+ see http://openwrt.org
-+
- config MACH_NAS100D
- bool
- prompt "NAS100D"
---- a/arch/arm/mach-ixp4xx/Makefile
-+++ b/arch/arm/mach-ixp4xx/Makefile
-@@ -22,6 +22,7 @@ obj-pci-$(CONFIG_MACH_SIDEWINDER) += sid
- obj-pci-$(CONFIG_MACH_COMPEX) += ixdp425-pci.o
- obj-pci-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-pci.o
- obj-pci-$(CONFIG_MACH_AP1000) += ixdp425-pci.o
-+obj-pci-$(CONFIG_MACH_TW5334) += tw5334-pci.o
-
- obj-y += common.o
-
-@@ -43,6 +44,7 @@ obj-$(CONFIG_MACH_SIDEWINDER) += sidewin
- obj-$(CONFIG_MACH_COMPEX) += compex-setup.o
- obj-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-setup.o
- obj-$(CONFIG_MACH_AP1000) += ap1000-setup.o
-+obj-$(CONFIG_MACH_TW5334) += tw5334-setup.o
-
- obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o
- obj-$(CONFIG_IXP4XX_QMGR) += ixp4xx_qmgr.o
---- /dev/null
-+++ b/arch/arm/mach-ixp4xx/tw5334-setup.c
-@@ -0,0 +1,162 @@
-+/*
-+ * arch/arm/mach-ixp4xx/tw5334-setup.c
-+ *
-+ * Board setup for the Titan Wireless TW-533-4
-+ *
-+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * based on coyote-setup.c:
-+ * Copyright (C) 2003-2005 MontaVista Software, Inc.
-+ *
-+ * Author: Imre Kaloz <Kaloz@openwrt.org>
-+ */
-+
-+#include <linux/if_ether.h>
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/device.h>
-+#include <linux/serial.h>
-+#include <linux/tty.h>
-+#include <linux/serial_8250.h>
-+#include <linux/slab.h>
-+
-+#include <asm/types.h>
-+#include <asm/setup.h>
-+#include <asm/memory.h>
-+#include <mach/hardware.h>
-+#include <asm/irq.h>
-+#include <asm/mach-types.h>
-+#include <asm/mach/arch.h>
-+#include <asm/mach/flash.h>
-+
-+static struct flash_platform_data tw5334_flash_data = {
-+ .map_name = "cfi_probe",
-+ .width = 2,
-+};
-+
-+static struct resource tw5334_flash_resource = {
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct platform_device tw5334_flash = {
-+ .name = "IXP4XX-Flash",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = &tw5334_flash_data,
-+ },
-+ .num_resources = 1,
-+ .resource = &tw5334_flash_resource,
-+};
-+
-+static struct resource tw5334_uart_resource = {
-+ .start = IXP4XX_UART2_BASE_PHYS,
-+ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct plat_serial8250_port tw5334_uart_data[] = {
-+ {
-+ .mapbase = IXP4XX_UART2_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART2,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ { },
-+};
-+
-+static struct platform_device tw5334_uart = {
-+ .name = "serial8250",
-+ .id = PLAT8250_DEV_PLATFORM,
-+ .dev = {
-+ .platform_data = tw5334_uart_data,
-+ },
-+ .num_resources = 1,
-+ .resource = &tw5334_uart_resource,
-+};
-+
-+/* Built-in 10/100 Ethernet MAC interfaces */
-+static struct eth_plat_info tw5334_plat_eth[] = {
-+ {
-+ .phy = 0,
-+ .rxq = 3,
-+ .txreadyq = 20,
-+ }, {
-+ .phy = 1,
-+ .rxq = 4,
-+ .txreadyq = 21,
-+ }
-+};
-+
-+static struct platform_device tw5334_eth[] = {
-+ {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEB,
-+ .dev.platform_data = tw5334_plat_eth,
-+ }, {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEC,
-+ .dev.platform_data = tw5334_plat_eth + 1,
-+ }
-+};
-+
-+static struct platform_device *tw5334_devices[] __initdata = {
-+ &tw5334_flash,
-+ &tw5334_uart,
-+ &tw5334_eth[0],
-+ &tw5334_eth[1],
-+};
-+
-+static void __init tw5334_init(void)
-+{
-+ uint8_t __iomem *f;
-+ int i;
-+
-+ ixp4xx_sys_init();
-+
-+ tw5334_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-+ tw5334_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
-+
-+ *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
-+ *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
-+
-+ platform_add_devices(tw5334_devices, ARRAY_SIZE(tw5334_devices));
-+
-+ /*
-+ * Map in a portion of the flash and read the MAC addresses.
-+ * Since it is stored in BE in the flash itself, we need to
-+ * byteswap it if we're in LE mode.
-+ */
-+ f = ioremap(IXP4XX_EXP_BUS_BASE(0), 0x1000000);
-+ if (f) {
-+ for (i = 0; i < 6; i++)
-+#ifdef __ARMEB__
-+ tw5334_plat_eth[0].hwaddr[i] = readb(f + 0xFC0422 + i);
-+ tw5334_plat_eth[1].hwaddr[i] = readb(f + 0xFC043B + i);
-+#else
-+ tw5334_plat_eth[0].hwaddr[i] = readb(f + 0xFC0422 + (i^3));
-+ tw5334_plat_eth[1].hwaddr[i] = readb(f + 0xFC043B + (i^3));
-+#endif
-+ iounmap(f);
-+ }
-+
-+ printk(KERN_INFO "TW-533-4: Using MAC address %pM for port 0\n",
-+ tw5334_plat_eth[0].hwaddr);
-+ printk(KERN_INFO "TW-533-4: Using MAC address %pM for port 1\n",
-+ tw5334_plat_eth[1].hwaddr);
-+}
-+
-+#ifdef CONFIG_MACH_TW5334
-+MACHINE_START(TW5334, "Titan Wireless TW-533-4")
-+ /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
-+ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
-+ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
-+ .map_io = ixp4xx_map_io,
-+ .init_irq = ixp4xx_init_irq,
-+ .timer = &ixp4xx_timer,
-+ .boot_params = 0x0100,
-+ .init_machine = tw5334_init,
-+MACHINE_END
-+#endif
---- /dev/null
-+++ b/arch/arm/mach-ixp4xx/tw5334-pci.c
-@@ -0,0 +1,69 @@
-+/*
-+ * arch/arch/mach-ixp4xx/tw5334-pci.c
-+ *
-+ * PCI setup routines for the Titan Wireless TW-533-4
-+ *
-+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * based on coyote-pci.c:
-+ * Copyright (C) 2002 Jungo Software Technologies.
-+ * Copyright (C) 2003 MontaVista Softwrae, Inc.
-+ *
-+ * Maintainer: Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/pci.h>
-+#include <linux/init.h>
-+#include <linux/irq.h>
-+
-+#include <asm/mach-types.h>
-+#include <mach/hardware.h>
-+
-+#include <asm/mach/pci.h>
-+
-+void __init tw5334_pci_preinit(void)
-+{
-+ set_irq_type(IRQ_IXP4XX_GPIO6, IRQ_TYPE_LEVEL_LOW);
-+ set_irq_type(IRQ_IXP4XX_GPIO2, IRQ_TYPE_LEVEL_LOW);
-+ set_irq_type(IRQ_IXP4XX_GPIO1, IRQ_TYPE_LEVEL_LOW);
-+ set_irq_type(IRQ_IXP4XX_GPIO0, IRQ_TYPE_LEVEL_LOW);
-+
-+ ixp4xx_pci_preinit();
-+}
-+
-+static int __init tw5334_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+ if (slot == 12)
-+ return IRQ_IXP4XX_GPIO6;
-+ else if (slot == 13)
-+ return IRQ_IXP4XX_GPIO2;
-+ else if (slot == 14)
-+ return IRQ_IXP4XX_GPIO1;
-+ else if (slot == 15)
-+ return IRQ_IXP4XX_GPIO0;
-+ else return -1;
-+}
-+
-+struct hw_pci tw5334_pci __initdata = {
-+ .nr_controllers = 1,
-+ .preinit = tw5334_pci_preinit,
-+ .swizzle = pci_std_swizzle,
-+ .setup = ixp4xx_setup,
-+ .scan = ixp4xx_scan_bus,
-+ .map_irq = tw5334_map_irq,
-+};
-+
-+int __init tw5334_pci_init(void)
-+{
-+ if (machine_is_tw5334())
-+ pci_common_init(&tw5334_pci);
-+ return 0;
-+}
-+
-+subsys_initcall(tw5334_pci_init);
---- a/arch/arm/mach-ixp4xx/include/mach/uncompress.h
-+++ b/arch/arm/mach-ixp4xx/include/mach/uncompress.h
-@@ -42,7 +42,8 @@ static __inline__ void __arch_decomp_set
- */
- if (machine_is_adi_coyote() || machine_is_gtwx5715() ||
- machine_is_gateway7001() || machine_is_wg302v2() ||
-- machine_is_pronghorn() || machine_is_pronghorn_metro() || machine_is_wrt300nv2())
-+ machine_is_pronghorn() || machine_is_pronghorn_metro() || machine_is_wrt300nv2() ||
-+ machine_is_tw5334())
- uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS;
- else
- uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;
diff --git a/target/linux/ixp4xx/patches-2.6.33/185-mi424wr_support.patch b/target/linux/ixp4xx/patches-2.6.33/185-mi424wr_support.patch
deleted file mode 100644
index 1b8ee89c9..000000000
--- a/target/linux/ixp4xx/patches-2.6.33/185-mi424wr_support.patch
+++ /dev/null
@@ -1,465 +0,0 @@
---- /dev/null
-+++ b/arch/arm/mach-ixp4xx/mi424wr-pci.c
-@@ -0,0 +1,71 @@
-+/*
-+ * arch/arm/mach-ixp4xx/mi424wr-pci.c
-+ *
-+ * Actiontec MI424WR board-level PCI initialization
-+ *
-+ * Copyright (C) 2008 Jose Vasconcellos
-+ *
-+ * Maintainer: Jose Vasconcellos <jvasco@verizon.net>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/pci.h>
-+#include <linux/init.h>
-+#include <linux/irq.h>
-+
-+#include <asm/mach-types.h>
-+#include <asm/mach/pci.h>
-+
-+/* PCI controller GPIO to IRQ pin mappings
-+ * This information was obtained from Actiontec's GPL release.
-+ *
-+ * INTA INTB
-+ * SLOT 13 8 6
-+ * SLOT 14 7 8
-+ * SLOT 15 6 7
-+ */
-+
-+void __init mi424wr_pci_preinit(void)
-+{
-+ set_irq_type(IRQ_IXP4XX_GPIO6, IRQ_TYPE_LEVEL_LOW);
-+ set_irq_type(IRQ_IXP4XX_GPIO7, IRQ_TYPE_LEVEL_LOW);
-+ set_irq_type(IRQ_IXP4XX_GPIO8, IRQ_TYPE_LEVEL_LOW);
-+
-+ ixp4xx_pci_preinit();
-+}
-+
-+static int __init mi424wr_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+ if (slot == 13)
-+ return IRQ_IXP4XX_GPIO8;
-+ if (slot == 14)
-+ return IRQ_IXP4XX_GPIO7;
-+ if (slot == 15)
-+ return IRQ_IXP4XX_GPIO6;
-+
-+ return -1;
-+}
-+
-+struct hw_pci mi424wr_pci __initdata = {
-+ .nr_controllers = 1,
-+ .preinit = mi424wr_pci_preinit,
-+ .swizzle = pci_std_swizzle,
-+ .setup = ixp4xx_setup,
-+ .scan = ixp4xx_scan_bus,
-+ .map_irq = mi424wr_map_irq,
-+};
-+
-+int __init mi424wr_pci_init(void)
-+{
-+ if (machine_is_mi424wr())
-+ pci_common_init(&mi424wr_pci);
-+ return 0;
-+}
-+
-+subsys_initcall(mi424wr_pci_init);
-+
---- /dev/null
-+++ b/arch/arm/mach-ixp4xx/mi424wr-setup.c
-@@ -0,0 +1,344 @@
-+/*
-+ * arch/arm/mach-ixp4xx/mi424wr-setup.c
-+ *
-+ * Actiontec MI424-WR board setup
-+ * Copyright (c) 2008 Jose Vasconcellos
-+ *
-+ * Based on Gemtek GTWX5715 by
-+ * Copyright (C) 2004 George T. Joseph
-+ * Derived from Coyote
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version 2
-+ * of the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-+ *
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/device.h>
-+#include <linux/serial.h>
-+#include <linux/serial_8250.h>
-+#include <linux/types.h>
-+#include <linux/memory.h>
-+#include <linux/leds.h>
-+#include <linux/spi/spi_gpio_old.h>
-+
-+#include <asm/setup.h>
-+#include <asm/irq.h>
-+#include <asm/io.h>
-+#include <asm/mach-types.h>
-+#include <asm/mach/arch.h>
-+#include <asm/mach/flash.h>
-+
-+/*
-+ * GPIO 2,3,4 and 9 are hard wired to the Micrel/Kendin KS8995M Switch
-+ * and operate as an SPI type interface. The details of the interface
-+ * are available on Kendin/Micrel's web site.
-+ */
-+
-+#define MI424WR_KSSPI_SELECT 9
-+#define MI424WR_KSSPI_TXD 4
-+#define MI424WR_KSSPI_CLOCK 2
-+#define MI424WR_KSSPI_RXD 3
-+
-+/*
-+ * The "reset" button is wired to GPIO 10.
-+ * The GPIO is brought "low" when the button is pushed.
-+ */
-+
-+#define MI424WR_BUTTON_GPIO 10
-+#define MI424WR_BUTTON_IRQ IRQ_IXP4XX_GPIO10
-+
-+#define MI424WR_MOCA_WAN_LED 11
-+
-+/* Latch on CS1 - taken from Actiontec's 2.4 source code
-+ *
-+ * default latch value
-+ * 0 - power alarm led (red) 0 (off)
-+ * 1 - power led (green) 0 (off)
-+ * 2 - wireless led (green) 1 (off)
-+ * 3 - no internet led (red) 0 (off)
-+ * 4 - internet ok led (green) 0 (off)
-+ * 5 - moca LAN 0 (off)
-+ * 6 - WAN alarm led (red) 0 (off)
-+ * 7 - PCI reset 1 (not reset)
-+ * 8 - IP phone 1 led (green) 1 (off)
-+ * 9 - IP phone 2 led (green) 1 (off)
-+ * 10 - VOIP ready led (green) 1 (off)
-+ * 11 - PSTN relay 1 control 0 (PSTN)
-+ * 12 - PSTN relay 1 control 0 (PSTN)
-+ * 13 - N/A
-+ * 14 - N/A
-+ * 15 - N/A
-+ */
-+
-+#define MI424WR_LATCH_MASK 0x04
-+#define MI424WR_LATCH_DEFAULT 0x1f86
-+
-+#define MI424WR_LATCH_ALARM_LED 0x00
-+#define MI424WR_LATCH_POWER_LED 0x01
-+#define MI424WR_LATCH_WIRELESS_LED 0x02
-+#define MI424WR_LATCH_INET_DOWN_LED 0x03
-+#define MI424WR_LATCH_INET_OK_LED 0x04
-+#define MI424WR_LATCH_MOCA_LAN_LED 0x05
-+#define MI424WR_LATCH_WAN_ALARM_LED 0x06
-+#define MI424WR_LATCH_PCI_RESET 0x07
-+#define MI424WR_LATCH_PHONE1_LED 0x08
-+#define MI424WR_LATCH_PHONE2_LED 0x09
-+#define MI424WR_LATCH_VOIP_LED 0x10
-+#define MI424WR_LATCH_PSTN_RELAY1 0x11
-+#define MI424WR_LATCH_PSTN_RELAY2 0x12
-+
-+/* initialize CS1 to default timings, Intel style, 16-bit bus */
-+#define MI424WR_CS1_CONFIG 0x80000002
-+
-+/* Define both UARTs but they are not easily accessible.
-+ */
-+
-+static struct resource mi424wr_uart_resources[] = {
-+ {
-+ .start = IXP4XX_UART1_BASE_PHYS,
-+ .end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ {
-+ .start = IXP4XX_UART2_BASE_PHYS,
-+ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM,
-+ }
-+};
-+
-+
-+static struct plat_serial8250_port mi424wr_uart_platform_data[] = {
-+ {
-+ .mapbase = IXP4XX_UART1_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART1,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ {
-+ .mapbase = IXP4XX_UART2_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART2,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ { },
-+};
-+
-+static struct platform_device mi424wr_uart_device = {
-+ .name = "serial8250",
-+ .id = PLAT8250_DEV_PLATFORM,
-+ .dev.platform_data = mi424wr_uart_platform_data,
-+ .num_resources = ARRAY_SIZE(mi424wr_uart_resources),
-+ .resource = mi424wr_uart_resources,
-+};
-+
-+static struct flash_platform_data mi424wr_flash_data = {
-+ .map_name = "cfi_probe",
-+ .width = 2,
-+};
-+
-+static struct resource mi424wr_flash_resource = {
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct platform_device mi424wr_flash = {
-+ .name = "IXP4XX-Flash",
-+ .id = 0,
-+ .dev.platform_data = &mi424wr_flash_data,
-+ .num_resources = 1,
-+ .resource = &mi424wr_flash_resource,
-+};
-+
-+static int mi424wr_spi_boardinfo_setup(struct spi_board_info *bi,
-+ struct spi_master *master, void *data)
-+{
-+
-+ strlcpy(bi->modalias, "spi-ks8995", sizeof(bi->modalias));
-+
-+ bi->max_speed_hz = 5000000 /* Hz */;
-+ bi->bus_num = master->bus_num;
-+ bi->mode = SPI_MODE_0;
-+
-+ return 0;
-+}
-+
-+static struct spi_gpio_platform_data mi424wr_spi_bus_data = {
-+ .pin_cs = MI424WR_KSSPI_SELECT,
-+ .pin_clk = MI424WR_KSSPI_CLOCK,
-+ .pin_miso = MI424WR_KSSPI_RXD,
-+ .pin_mosi = MI424WR_KSSPI_TXD,
-+ .cs_activelow = 1,
-+ .no_spi_delay = 1,
-+ .boardinfo_setup = mi424wr_spi_boardinfo_setup,
-+};
-+
-+static struct gpio_led mi424wr_gpio_led[] = {
-+ {
-+ .name = "moca-wan", /* green led */
-+ .gpio = MI424WR_MOCA_WAN_LED,
-+ .active_low = 0,
-+ }
-+};
-+
-+static struct gpio_led_platform_data mi424wr_gpio_leds_data = {
-+ .num_leds = 1,
-+ .leds = mi424wr_gpio_led,
-+};
-+
-+static struct platform_device mi424wr_gpio_leds = {
-+ .name = "leds-gpio",
-+ .id = -1,
-+ .dev.platform_data = &mi424wr_gpio_leds_data,
-+};
-+
-+static uint16_t latch_value = MI424WR_LATCH_DEFAULT;
-+static uint16_t __iomem *iobase;
-+
-+static void mi424wr_latch_set_led(u8 bit, enum led_brightness value)
-+{
-+
-+ if (((MI424WR_LATCH_MASK >> bit) & 1) ^ (value == LED_OFF))
-+ latch_value &= ~(0x1 << bit);
-+ else
-+ latch_value |= (0x1 << bit);
-+
-+ __raw_writew(latch_value, iobase);
-+
-+}
-+
-+static struct latch_led mi424wr_latch_led[] = {
-+ {
-+ .name = "power-alarm",
-+ .bit = MI424WR_LATCH_ALARM_LED,
-+ },
-+ {
-+ .name = "power-ok",
-+ .bit = MI424WR_LATCH_POWER_LED,
-+ },
-+ {
-+ .name = "wireless", /* green led */
-+ .bit = MI424WR_LATCH_WIRELESS_LED,
-+ },
-+ {
-+ .name = "inet-down", /* red led */
-+ .bit = MI424WR_LATCH_INET_DOWN_LED,
-+ },
-+ {
-+ .name = "inet-up", /* green led */
-+ .bit = MI424WR_LATCH_INET_OK_LED,
-+ },
-+ {
-+ .name = "moca-lan", /* green led */
-+ .bit = MI424WR_LATCH_MOCA_LAN_LED,
-+ },
-+ {
-+ .name = "wan-alarm", /* red led */
-+ .bit = MI424WR_LATCH_WAN_ALARM_LED,
-+ }
-+};
-+
-+static struct latch_led_platform_data mi424wr_latch_leds_data = {
-+ .num_leds = ARRAY_SIZE(mi424wr_latch_led),
-+ .mem = 0x51000000,
-+ .leds = mi424wr_latch_led,
-+ .set_led = mi424wr_latch_set_led,
-+};
-+
-+static struct platform_device mi424wr_latch_leds = {
-+ .name = "leds-latch",
-+ .id = -1,
-+ .dev.platform_data = &mi424wr_latch_leds_data,
-+};
-+
-+static struct platform_device mi424wr_spi_bus = {
-+ .name = "spi-gpio",
-+ .id = 0,
-+ .dev.platform_data = &mi424wr_spi_bus_data,
-+};
-+
-+static struct eth_plat_info mi424wr_npeb_data = {
-+ .phy = 17, /* KS8721 */
-+ .rxq = 3,
-+ .txreadyq = 20,
-+};
-+
-+static struct eth_plat_info mi424wr_npec_data = {
-+ .phy = IXP4XX_ETH_PHY_MAX_ADDR,
-+ .phy_mask = 0x1e, /* ports 1-4 of the KS8995 switch */
-+ .rxq = 4,
-+ .txreadyq = 21,
-+};
-+
-+static struct platform_device mi424wr_npe_devices[] = {
-+ {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEC,
-+ .dev.platform_data = &mi424wr_npec_data,
-+ }, {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEB,
-+ .dev.platform_data = &mi424wr_npeb_data,
-+ }
-+};
-+
-+static struct platform_device *mi424wr_devices[] __initdata = {
-+ &mi424wr_uart_device,
-+ &mi424wr_flash,
-+ &mi424wr_gpio_leds,
-+ &mi424wr_latch_leds,
-+ &mi424wr_spi_bus,
-+ &mi424wr_npe_devices[0],
-+ &mi424wr_npe_devices[1],
-+};
-+
-+static void __init mi424wr_init(void)
-+{
-+ ixp4xx_sys_init();
-+
-+ mi424wr_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-+ mi424wr_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_8M - 1;
-+
-+ *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
-+ *IXP4XX_EXP_CS1 = MI424WR_CS1_CONFIG;
-+
-+ /* configure button as input
-+ */
-+ gpio_line_config(MI424WR_BUTTON_GPIO, IXP4XX_GPIO_IN);
-+
-+ /* Initialize LEDs and enables PCI bus.
-+ */
-+ iobase = ioremap_nocache(IXP4XX_EXP_BUS_BASE(1), 0x1000);
-+ __raw_writew(latch_value, iobase);
-+
-+ platform_add_devices(mi424wr_devices, ARRAY_SIZE(mi424wr_devices));
-+}
-+
-+
-+MACHINE_START(MI424WR, "Actiontec MI424WR")
-+ /* Maintainer: Jose Vasconcellos */
-+ .phys_io = IXP4XX_UART2_BASE_PHYS,
-+ .io_pg_offst = ((IXP4XX_UART2_BASE_VIRT) >> 18) & 0xfffc,
-+ .map_io = ixp4xx_map_io,
-+ .init_irq = ixp4xx_init_irq,
-+ .timer = &ixp4xx_timer,
-+ .boot_params = 0x0100,
-+ .init_machine = mi424wr_init,
-+MACHINE_END
-+
---- a/arch/arm/mach-ixp4xx/Makefile
-+++ b/arch/arm/mach-ixp4xx/Makefile
-@@ -23,6 +23,7 @@ obj-pci-$(CONFIG_MACH_COMPEX) += ixdp42
- obj-pci-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-pci.o
- obj-pci-$(CONFIG_MACH_AP1000) += ixdp425-pci.o
- obj-pci-$(CONFIG_MACH_TW5334) += tw5334-pci.o
-+obj-pci-$(CONFIG_MACH_MI424WR) += mi424wr-pci.o
-
- obj-y += common.o
-
-@@ -45,6 +46,7 @@ obj-$(CONFIG_MACH_COMPEX) += compex-setu
- obj-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-setup.o
- obj-$(CONFIG_MACH_AP1000) += ap1000-setup.o
- obj-$(CONFIG_MACH_TW5334) += tw5334-setup.o
-+obj-$(CONFIG_MACH_MI424WR) += mi424wr-setup.o
-
- obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o
- obj-$(CONFIG_IXP4XX_QMGR) += ixp4xx_qmgr.o
---- a/arch/arm/mach-ixp4xx/Kconfig
-+++ b/arch/arm/mach-ixp4xx/Kconfig
-@@ -235,6 +235,13 @@ config MACH_GTWX5715
- "High Speed" UART is n/c (as far as I can tell)
- 20 Pin ARM/Xscale JTAG interface on J2
-
-+config MACH_MI424WR
-+ bool "Actiontec MI424WR"
-+ depends on ARCH_IXP4XX
-+ select PCI
-+ help
-+ Add support for the Actiontec MI424-WR.
-+
- comment "IXP4xx Options"
-
- config IXP4XX_INDIRECT_PCI
---- a/arch/arm/configs/ixp4xx_defconfig
-+++ b/arch/arm/configs/ixp4xx_defconfig
-@@ -172,6 +172,7 @@ CONFIG_MACH_FSG=y
- CONFIG_CPU_IXP46X=y
- CONFIG_CPU_IXP43X=y
- CONFIG_MACH_GTWX5715=y
-+CONFIG_MACH_MI424WR=y
-
- #
- # IXP4xx Options
diff --git a/target/linux/ixp4xx/patches-2.6.33/190-cambria_support.patch b/target/linux/ixp4xx/patches-2.6.33/190-cambria_support.patch
deleted file mode 100644
index 6753451be..000000000
--- a/target/linux/ixp4xx/patches-2.6.33/190-cambria_support.patch
+++ /dev/null
@@ -1,553 +0,0 @@
---- /dev/null
-+++ b/arch/arm/mach-ixp4xx/cambria-pci.c
-@@ -0,0 +1,74 @@
-+/*
-+ * arch/arch/mach-ixp4xx/cambria-pci.c
-+ *
-+ * PCI setup routines for Gateworks Cambria series
-+ *
-+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * based on coyote-pci.c:
-+ * Copyright (C) 2002 Jungo Software Technologies.
-+ * Copyright (C) 2003 MontaVista Softwrae, Inc.
-+ *
-+ * Maintainer: Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/pci.h>
-+#include <linux/init.h>
-+#include <linux/irq.h>
-+
-+#include <asm/mach-types.h>
-+#include <mach/hardware.h>
-+#include <asm/irq.h>
-+
-+#include <asm/mach/pci.h>
-+
-+extern void ixp4xx_pci_preinit(void);
-+extern int ixp4xx_setup(int nr, struct pci_sys_data *sys);
-+extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys);
-+
-+void __init cambria_pci_preinit(void)
-+{
-+ set_irq_type(IRQ_IXP4XX_GPIO11, IRQ_TYPE_LEVEL_LOW);
-+ set_irq_type(IRQ_IXP4XX_GPIO10, IRQ_TYPE_LEVEL_LOW);
-+ set_irq_type(IRQ_IXP4XX_GPIO9, IRQ_TYPE_LEVEL_LOW);
-+ set_irq_type(IRQ_IXP4XX_GPIO8, IRQ_TYPE_LEVEL_LOW);
-+
-+ ixp4xx_pci_preinit();
-+}
-+
-+static int __init cambria_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+ if (slot == 1)
-+ return IRQ_IXP4XX_GPIO11;
-+ else if (slot == 2)
-+ return IRQ_IXP4XX_GPIO10;
-+ else if (slot == 3)
-+ return IRQ_IXP4XX_GPIO9;
-+ else if (slot == 4)
-+ return IRQ_IXP4XX_GPIO8;
-+ else return -1;
-+}
-+
-+struct hw_pci cambria_pci __initdata = {
-+ .nr_controllers = 1,
-+ .preinit = cambria_pci_preinit,
-+ .swizzle = pci_std_swizzle,
-+ .setup = ixp4xx_setup,
-+ .scan = ixp4xx_scan_bus,
-+ .map_irq = cambria_map_irq,
-+};
-+
-+int __init cambria_pci_init(void)
-+{
-+ if (machine_is_cambria())
-+ pci_common_init(&cambria_pci);
-+ return 0;
-+}
-+
-+subsys_initcall(cambria_pci_init);
---- /dev/null
-+++ b/arch/arm/mach-ixp4xx/cambria-setup.c
-@@ -0,0 +1,429 @@
-+/*
-+ * arch/arm/mach-ixp4xx/cambria-setup.c
-+ *
-+ * Board setup for the Gateworks Cambria series
-+ *
-+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * based on coyote-setup.c:
-+ * Copyright (C) 2003-2005 MontaVista Software, Inc.
-+ *
-+ * Author: Imre Kaloz <kaloz@openwrt.org>
-+ */
-+
-+#include <linux/device.h>
-+#include <linux/i2c.h>
-+#include <linux/i2c-gpio.h>
-+#include <linux/i2c/at24.h>
-+#include <linux/if_ether.h>
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/leds.h>
-+#include <linux/memory.h>
-+#include <linux/netdevice.h>
-+#include <linux/serial.h>
-+#include <linux/serial_8250.h>
-+#include <linux/slab.h>
-+#include <linux/socket.h>
-+#include <linux/types.h>
-+#include <linux/tty.h>
-+
-+#include <mach/hardware.h>
-+#include <asm/irq.h>
-+#include <asm/mach-types.h>
-+#include <asm/mach/arch.h>
-+#include <asm/mach/flash.h>
-+#include <asm/setup.h>
-+
-+struct cambria_board_info {
-+ unsigned char *model;
-+ void (*setup)(void);
-+};
-+
-+static struct cambria_board_info *cambria_info __initdata;
-+
-+static struct flash_platform_data cambria_flash_data = {
-+ .map_name = "cfi_probe",
-+ .width = 2,
-+};
-+
-+static struct resource cambria_flash_resource = {
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct platform_device cambria_flash = {
-+ .name = "IXP4XX-Flash",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = &cambria_flash_data,
-+ },
-+ .num_resources = 1,
-+ .resource = &cambria_flash_resource,
-+};
-+
-+static struct i2c_gpio_platform_data cambria_i2c_gpio_data = {
-+ .sda_pin = 7,
-+ .scl_pin = 6,
-+};
-+
-+static struct platform_device cambria_i2c_gpio = {
-+ .name = "i2c-gpio",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = &cambria_i2c_gpio_data,
-+ },
-+};
-+
-+static struct eth_plat_info cambria_npec_data = {
-+ .phy = 1,
-+ .rxq = 4,
-+ .txreadyq = 21,
-+};
-+
-+static struct eth_plat_info cambria_npea_data = {
-+ .phy = 2,
-+ .rxq = 2,
-+ .txreadyq = 19,
-+};
-+
-+static struct platform_device cambria_npec_device = {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEC,
-+ .dev.platform_data = &cambria_npec_data,
-+};
-+
-+static struct platform_device cambria_npea_device = {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEA,
-+ .dev.platform_data = &cambria_npea_data,
-+};
-+
-+static struct resource cambria_uart_resource = {
-+ .start = IXP4XX_UART1_BASE_PHYS,
-+ .end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct plat_serial8250_port cambria_uart_data[] = {
-+ {
-+ .mapbase = IXP4XX_UART1_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART1,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ { },
-+};
-+
-+static struct platform_device cambria_uart = {
-+ .name = "serial8250",
-+ .id = PLAT8250_DEV_PLATFORM,
-+ .dev = {
-+ .platform_data = cambria_uart_data,
-+ },
-+ .num_resources = 1,
-+ .resource = &cambria_uart_resource,
-+};
-+
-+static struct resource cambria_pata_resources[] = {
-+ {
-+ .flags = IORESOURCE_MEM
-+ },
-+ {
-+ .flags = IORESOURCE_MEM,
-+ },
-+ {
-+ .name = "intrq",
-+ .start = IRQ_IXP4XX_GPIO12,
-+ .end = IRQ_IXP4XX_GPIO12,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct ixp4xx_pata_data cambria_pata_data = {
-+ .cs0_bits = 0xbfff3c03,
-+ .cs1_bits = 0xbfff3c03,
-+};
-+
-+static struct platform_device cambria_pata = {
-+ .name = "pata_ixp4xx_cf",
-+ .id = 0,
-+ .dev.platform_data = &cambria_pata_data,
-+ .num_resources = ARRAY_SIZE(cambria_pata_resources),
-+ .resource = cambria_pata_resources,
-+};
-+
-+static struct gpio_led cambria_gpio_leds[] = {
-+ {
-+ .name = "user", /* green led */
-+ .gpio = 5,
-+ .active_low = 1,
-+ }
-+};
-+
-+static struct gpio_led_platform_data cambria_gpio_leds_data = {
-+ .num_leds = 1,
-+ .leds = cambria_gpio_leds,
-+};
-+
-+static struct platform_device cambria_gpio_leds_device = {
-+ .name = "leds-gpio",
-+ .id = -1,
-+ .dev.platform_data = &cambria_gpio_leds_data,
-+};
-+
-+static struct latch_led cambria_latch_leds[] = {
-+ {
-+ .name = "ledA", /* green led */
-+ .bit = 0,
-+ },
-+ {
-+ .name = "ledB", /* green led */
-+ .bit = 1,
-+ },
-+ {
-+ .name = "ledC", /* green led */
-+ .bit = 2,
-+ },
-+ {
-+ .name = "ledD", /* green led */
-+ .bit = 3,
-+ },
-+ {
-+ .name = "ledE", /* green led */
-+ .bit = 4,
-+ },
-+ {
-+ .name = "ledF", /* green led */
-+ .bit = 5,
-+ },
-+ {
-+ .name = "ledG", /* green led */
-+ .bit = 6,
-+ },
-+ {
-+ .name = "ledH", /* green led */
-+ .bit = 7,
-+ }
-+};
-+
-+static struct latch_led_platform_data cambria_latch_leds_data = {
-+ .num_leds = 8,
-+ .leds = cambria_latch_leds,
-+ .mem = 0x53F40000,
-+};
-+
-+static struct platform_device cambria_latch_leds_device = {
-+ .name = "leds-latch",
-+ .id = -1,
-+ .dev.platform_data = &cambria_latch_leds_data,
-+};
-+
-+static struct resource cambria_usb0_resources[] = {
-+ {
-+ .start = 0xCD000000,
-+ .end = 0xCD000300,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ {
-+ .start = 32,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct resource cambria_usb1_resources[] = {
-+ {
-+ .start = 0xCE000000,
-+ .end = 0xCE000300,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ {
-+ .start = 33,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static u64 ehci_dma_mask = ~(u32)0;
-+
-+static struct platform_device cambria_usb0_device = {
-+ .name = "ixp4xx-ehci",
-+ .id = 0,
-+ .resource = cambria_usb0_resources,
-+ .num_resources = ARRAY_SIZE(cambria_usb0_resources),
-+ .dev = {
-+ .dma_mask = &ehci_dma_mask,
-+ .coherent_dma_mask = 0xffffffff,
-+ },
-+};
-+
-+static struct platform_device cambria_usb1_device = {
-+ .name = "ixp4xx-ehci",
-+ .id = 1,
-+ .resource = cambria_usb1_resources,
-+ .num_resources = ARRAY_SIZE(cambria_usb1_resources),
-+ .dev = {
-+ .dma_mask = &ehci_dma_mask,
-+ .coherent_dma_mask = 0xffffffff,
-+ },
-+};
-+
-+static struct platform_device *cambria_devices[] __initdata = {
-+ &cambria_i2c_gpio,
-+ &cambria_flash,
-+ &cambria_uart,
-+};
-+
-+static void __init cambria_gw23xx_setup(void)
-+{
-+ platform_device_register(&cambria_npec_device);
-+ platform_device_register(&cambria_npea_device);
-+}
-+
-+static void __init cambria_gw2350_setup(void)
-+{
-+ platform_device_register(&cambria_npec_device);
-+ platform_device_register(&cambria_npea_device);
-+
-+ platform_device_register(&cambria_usb0_device);
-+ platform_device_register(&cambria_usb1_device);
-+
-+ platform_device_register(&cambria_gpio_leds_device);
-+}
-+
-+static void __init cambria_gw2358_setup(void)
-+{
-+ platform_device_register(&cambria_npec_device);
-+ platform_device_register(&cambria_npea_device);
-+
-+ platform_device_register(&cambria_usb0_device);
-+ platform_device_register(&cambria_usb1_device);
-+
-+ platform_device_register(&cambria_pata);
-+
-+ platform_device_register(&cambria_latch_leds_device);
-+}
-+
-+static struct cambria_board_info cambria_boards[] __initdata = {
-+ {
-+ .model = "GW2350",
-+ .setup = cambria_gw2350_setup,
-+ }, {
-+ .model = "GW2358",
-+ .setup = cambria_gw2358_setup,
-+ }
-+};
-+
-+static struct cambria_board_info * __init cambria_find_board_info(char *model)
-+{
-+ int i;
-+ model[6] = '\0';
-+
-+ for (i = 0; i < ARRAY_SIZE(cambria_boards); i++) {
-+ struct cambria_board_info *info = &cambria_boards[i];
-+ if (strcmp(info->model, model) == 0)
-+ return info;
-+ }
-+
-+ return NULL;
-+}
-+
-+static struct memory_accessor *at24_mem_acc;
-+
-+static void at24_setup(struct memory_accessor *mem_acc, void *context)
-+{
-+ char mac_addr[ETH_ALEN];
-+ char model[7];
-+
-+ at24_mem_acc = mem_acc;
-+
-+ /* Read MAC addresses */
-+ if (at24_mem_acc->read(at24_mem_acc, mac_addr, 0x0, 6) == 6) {
-+ memcpy(&cambria_npec_data.hwaddr, mac_addr, ETH_ALEN);
-+ }
-+ if (at24_mem_acc->read(at24_mem_acc, mac_addr, 0x6, 6) == 6) {
-+ memcpy(&cambria_npea_data.hwaddr, mac_addr, ETH_ALEN);
-+ }
-+
-+ /* Read the first 6 bytes of the model number */
-+ if (at24_mem_acc->read(at24_mem_acc, model, 0x20, 6) == 6) {
-+ cambria_info = cambria_find_board_info(model);
-+ }
-+
-+}
-+
-+static struct at24_platform_data cambria_eeprom_info = {
-+ .byte_len = 1024,
-+ .page_size = 16,
-+ .flags = AT24_FLAG_READONLY,
-+ .setup = at24_setup,
-+};
-+
-+static struct i2c_board_info __initdata cambria_i2c_board_info[] = {
-+ {
-+ I2C_BOARD_INFO("ds1672", 0x68),
-+ },
-+ {
-+ I2C_BOARD_INFO("ad7418", 0x28),
-+ },
-+ {
-+ I2C_BOARD_INFO("24c08", 0x51),
-+ .platform_data = &cambria_eeprom_info
-+ },
-+};
-+
-+static void __init cambria_init(void)
-+{
-+ ixp4xx_sys_init();
-+
-+ cambria_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-+ cambria_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
-+
-+ *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
-+ *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
-+
-+ platform_add_devices(cambria_devices, ARRAY_SIZE(cambria_devices));
-+
-+ cambria_pata_resources[0].start = 0x53e00000;
-+ cambria_pata_resources[0].end = 0x53e3ffff;
-+
-+ cambria_pata_resources[1].start = 0x53e40000;
-+ cambria_pata_resources[1].end = 0x53e7ffff;
-+
-+ cambria_pata_data.cs0_cfg = IXP4XX_EXP_CS3;
-+ cambria_pata_data.cs1_cfg = IXP4XX_EXP_CS3;
-+
-+ i2c_register_board_info(0, cambria_i2c_board_info,
-+ ARRAY_SIZE(cambria_i2c_board_info));
-+}
-+
-+static int __init cambria_model_setup(void)
-+{
-+ if (!machine_is_cambria())
-+ return 0;
-+
-+ if (cambria_info) {
-+ printk(KERN_DEBUG "Running on Gateworks Cambria %s\n",
-+ cambria_info->model);
-+ cambria_info->setup();
-+ } else {
-+ printk(KERN_INFO "Unknown/missing Cambria model number"
-+ " -- defaults will be used\n");
-+ cambria_gw23xx_setup();
-+ }
-+
-+ return 0;
-+}
-+late_initcall(cambria_model_setup);
-+
-+MACHINE_START(CAMBRIA, "Gateworks Cambria series")
-+ /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
-+ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
-+ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
-+ .map_io = ixp4xx_map_io,
-+ .init_irq = ixp4xx_init_irq,
-+ .timer = &ixp4xx_timer,
-+ .boot_params = 0x0100,
-+ .init_machine = cambria_init,
-+MACHINE_END
---- a/arch/arm/mach-ixp4xx/Kconfig
-+++ b/arch/arm/mach-ixp4xx/Kconfig
-@@ -25,6 +25,14 @@ config MACH_AVILA
- Avila Network Platform. For more information on this platform,
- see <file:Documentation/arm/IXP4xx>.
-
-+config MACH_CAMBRIA
-+ bool "Cambria"
-+ select PCI
-+ help
-+ Say 'Y' here if you want your kernel to support the Gateworks
-+ Cambria series. For more information on this platform,
-+ see <file:Documentation/arm/IXP4xx>.
-+
- config MACH_LOFT
- bool "Loft"
- depends on MACH_AVILA
-@@ -214,7 +222,7 @@ config CPU_IXP46X
-
- config CPU_IXP43X
- bool
-- depends on MACH_KIXRP435
-+ depends on MACH_KIXRP435 || MACH_CAMBRIA
- default y
-
- config MACH_GTWX5715
---- a/arch/arm/mach-ixp4xx/Makefile
-+++ b/arch/arm/mach-ixp4xx/Makefile
-@@ -7,6 +7,7 @@ obj-pci-n :=
-
- obj-pci-$(CONFIG_ARCH_IXDP4XX) += ixdp425-pci.o
- obj-pci-$(CONFIG_MACH_AVILA) += avila-pci.o
-+obj-pci-$(CONFIG_MACH_CAMBRIA) += cambria-pci.o
- obj-pci-$(CONFIG_MACH_IXDPG425) += ixdpg425-pci.o
- obj-pci-$(CONFIG_ARCH_ADI_COYOTE) += coyote-pci.o
- obj-pci-$(CONFIG_MACH_GTWX5715) += gtwx5715-pci.o
-@@ -29,6 +30,7 @@ obj-y += common.o
-
- obj-$(CONFIG_ARCH_IXDP4XX) += ixdp425-setup.o
- obj-$(CONFIG_MACH_AVILA) += avila-setup.o
-+obj-$(CONFIG_MACH_CAMBRIA) += cambria-setup.o
- obj-$(CONFIG_MACH_IXDPG425) += coyote-setup.o
- obj-$(CONFIG_ARCH_ADI_COYOTE) += coyote-setup.o
- obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-setup.o
diff --git a/target/linux/ixp4xx/patches-2.6.33/191-cambria_optional_uart.patch b/target/linux/ixp4xx/patches-2.6.33/191-cambria_optional_uart.patch
deleted file mode 100644
index 2ebe3e4e3..000000000
--- a/target/linux/ixp4xx/patches-2.6.33/191-cambria_optional_uart.patch
+++ /dev/null
@@ -1,217 +0,0 @@
---- a/arch/arm/mach-ixp4xx/cambria-setup.c
-+++ b/arch/arm/mach-ixp4xx/cambria-setup.c
-@@ -34,6 +34,7 @@
- #include <asm/mach/arch.h>
- #include <asm/mach/flash.h>
- #include <asm/setup.h>
-+#include <linux/irq.h>
-
- struct cambria_board_info {
- unsigned char *model;
-@@ -127,6 +128,45 @@ static struct platform_device cambria_ua
- .resource = &cambria_uart_resource,
- };
-
-+static struct resource cambria_optional_uart_resources[] = {
-+ {
-+ .start = 0x52000000,
-+ .end = 0x52000fff,
-+ .flags = IORESOURCE_MEM
-+ },
-+ {
-+ .start = 0x53000000,
-+ .end = 0x53000fff,
-+ .flags = IORESOURCE_MEM
-+ }
-+};
-+
-+static struct plat_serial8250_port cambria_optional_uart_data[] = {
-+ {
-+ .flags = UPF_BOOT_AUTOCONF,
-+ .iotype = UPIO_MEM_DELAY,
-+ .regshift = 0,
-+ .uartclk = 1843200,
-+ .rw_delay = 2,
-+ },
-+ {
-+ .flags = UPF_BOOT_AUTOCONF,
-+ .iotype = UPIO_MEM_DELAY,
-+ .regshift = 0,
-+ .uartclk = 1843200,
-+ .rw_delay = 2,
-+ },
-+ { },
-+};
-+
-+static struct platform_device cambria_optional_uart = {
-+ .name = "serial8250",
-+ .id = PLAT8250_DEV_PLATFORM1,
-+ .dev.platform_data = cambria_optional_uart_data,
-+ .num_resources = 2,
-+ .resource = cambria_optional_uart_resources,
-+};
-+
- static struct resource cambria_pata_resources[] = {
- {
- .flags = IORESOURCE_MEM
-@@ -283,6 +323,19 @@ static void __init cambria_gw23xx_setup(
-
- static void __init cambria_gw2350_setup(void)
- {
-+ *IXP4XX_EXP_CS2 = 0xBFFF3C43;
-+ set_irq_type(IRQ_IXP4XX_GPIO3, IRQ_TYPE_EDGE_RISING);
-+ cambria_optional_uart_data[0].mapbase = 0x52FF0000;
-+ cambria_optional_uart_data[0].membase = (void __iomem *)ioremap(0x52FF0000, 0x0fff);
-+ cambria_optional_uart_data[0].irq = IRQ_IXP4XX_GPIO3;
-+
-+ *IXP4XX_EXP_CS3 = 0xBFFF3C43;
-+ set_irq_type(IRQ_IXP4XX_GPIO4, IRQ_TYPE_EDGE_RISING);
-+ cambria_optional_uart_data[1].mapbase = 0x53FF0000;
-+ cambria_optional_uart_data[1].membase = (void __iomem *)ioremap(0x53FF0000, 0x0fff);
-+ cambria_optional_uart_data[1].irq = IRQ_IXP4XX_GPIO4;
-+
-+ platform_device_register(&cambria_optional_uart);
- platform_device_register(&cambria_npec_device);
- platform_device_register(&cambria_npea_device);
-
-@@ -294,6 +347,19 @@ static void __init cambria_gw2350_setup(
-
- static void __init cambria_gw2358_setup(void)
- {
-+ *IXP4XX_EXP_CS3 = 0xBFFF3C43;
-+ set_irq_type(IRQ_IXP4XX_GPIO3, IRQ_TYPE_EDGE_RISING);
-+ cambria_optional_uart_data[0].mapbase = 0x53FC0000;
-+ cambria_optional_uart_data[0].membase = (void __iomem *)ioremap(0x53FC0000, 0x0fff);
-+ cambria_optional_uart_data[0].irq = IRQ_IXP4XX_GPIO3;
-+
-+ set_irq_type(IRQ_IXP4XX_GPIO4, IRQ_TYPE_EDGE_RISING);
-+ cambria_optional_uart_data[1].mapbase = 0x53F80000;
-+ cambria_optional_uart_data[1].membase = (void __iomem *)ioremap(0x53F80000, 0x0fff);
-+ cambria_optional_uart_data[1].irq = IRQ_IXP4XX_GPIO4;
-+
-+ platform_device_register(&cambria_optional_uart);
-+
- platform_device_register(&cambria_npec_device);
- platform_device_register(&cambria_npea_device);
-
---- a/include/linux/serial_8250.h
-+++ b/include/linux/serial_8250.h
-@@ -27,6 +27,7 @@ struct plat_serial8250_port {
- void *private_data;
- unsigned char regshift; /* register shift */
- unsigned char iotype; /* UPIO_* */
-+ unsigned int rw_delay; /* udelay for slower busses IXP4XX Expansion Bus */
- unsigned char hub6;
- upf_t flags; /* UPF_* flags */
- unsigned int type; /* If UPF_FIXED_TYPE */
---- a/include/linux/serial_core.h
-+++ b/include/linux/serial_core.h
-@@ -288,6 +288,7 @@ struct uart_port {
- #define UPIO_TSI (5) /* Tsi108/109 type IO */
- #define UPIO_DWAPB (6) /* DesignWare APB UART */
- #define UPIO_RM9000 (7) /* RM9000 type IO */
-+#define UPIO_MEM_DELAY (8)
-
- unsigned int read_status_mask; /* driver specific */
- unsigned int ignore_status_mask; /* driver specific */
-@@ -330,6 +331,7 @@ struct uart_port {
-
- unsigned int mctrl; /* current modem ctrl settings */
- unsigned int timeout; /* character-based timeout */
-+ unsigned int rw_delay; /* udelay for slow busses, IXP4XX Expansion Bus */
- unsigned int type; /* port type */
- const struct uart_ops *ops;
- unsigned int custom_divisor;
---- a/drivers/serial/8250.c
-+++ b/drivers/serial/8250.c
-@@ -409,6 +409,20 @@ static void mem_serial_out(struct uart_p
- writeb(value, p->membase + offset);
- }
-
-+static unsigned int memdelay_serial_in(struct uart_port *p, int offset)
-+{
-+ struct uart_8250_port *up = (struct uart_8250_port *)p;
-+ udelay(up->port.rw_delay);
-+ return mem_serial_in(p, offset);
-+}
-+
-+static void memdelay_serial_out(struct uart_port *p, int offset, int value)
-+{
-+ struct uart_8250_port *up = (struct uart_8250_port *)p;
-+ udelay(up->port.rw_delay);
-+ mem_serial_out(p, offset, value);
-+}
-+
- static void mem32_serial_out(struct uart_port *p, int offset, int value)
- {
- offset = map_8250_out_reg(p, offset) << p->regshift;
-@@ -502,6 +516,11 @@ static void set_io_from_upio(struct uart
- p->serial_out = mem32_serial_out;
- break;
-
-+ case UPIO_MEM_DELAY:
-+ p->serial_in = memdelay_serial_in;
-+ p->serial_out = memdelay_serial_out;
-+ break;
-+
- #ifdef CONFIG_SERIAL_8250_AU1X00
- case UPIO_AU:
- p->serial_in = au_serial_in;
-@@ -534,6 +553,7 @@ serial_out_sync(struct uart_8250_port *u
- switch (p->iotype) {
- case UPIO_MEM:
- case UPIO_MEM32:
-+ case UPIO_MEM_DELAY:
- #ifdef CONFIG_SERIAL_8250_AU1X00
- case UPIO_AU:
- #endif
-@@ -2450,6 +2470,7 @@ static int serial8250_request_std_resour
- case UPIO_MEM32:
- case UPIO_MEM:
- case UPIO_DWAPB:
-+ case UPIO_MEM_DELAY:
- if (!up->port.mapbase)
- break;
-
-@@ -2487,6 +2508,7 @@ static void serial8250_release_std_resou
- case UPIO_MEM32:
- case UPIO_MEM:
- case UPIO_DWAPB:
-+ case UPIO_MEM_DELAY:
- if (!up->port.mapbase)
- break;
-
-@@ -2964,6 +2986,7 @@ static int __devinit serial8250_probe(st
- port.serial_in = p->serial_in;
- port.serial_out = p->serial_out;
- port.dev = &dev->dev;
-+ port.rw_delay = p->rw_delay;
- port.irqflags |= irqflag;
- ret = serial8250_register_port(&port);
- if (ret < 0) {
-@@ -3113,6 +3136,7 @@ int serial8250_register_port(struct uart
- uart->port.iotype = port->iotype;
- uart->port.flags = port->flags | UPF_BOOT_AUTOCONF;
- uart->port.mapbase = port->mapbase;
-+ uart->port.rw_delay = port->rw_delay;
- uart->port.private_data = port->private_data;
- if (port->dev)
- uart->port.dev = port->dev;
---- a/drivers/serial/serial_core.c
-+++ b/drivers/serial/serial_core.c
-@@ -2144,6 +2144,7 @@ uart_report_port(struct uart_driver *drv
- snprintf(address, sizeof(address),
- "I/O 0x%lx offset 0x%x", port->iobase, port->hub6);
- break;
-+ case UPIO_MEM_DELAY:
- case UPIO_MEM:
- case UPIO_MEM32:
- case UPIO_AU:
-@@ -2557,6 +2558,7 @@ int uart_match_port(struct uart_port *po
- case UPIO_HUB6:
- return (port1->iobase == port2->iobase) &&
- (port1->hub6 == port2->hub6);
-+ case UPIO_MEM_DELAY:
- case UPIO_MEM:
- case UPIO_MEM32:
- case UPIO_AU:
diff --git a/target/linux/ixp4xx/patches-2.6.33/192-cambria_gpio_device.patch b/target/linux/ixp4xx/patches-2.6.33/192-cambria_gpio_device.patch
deleted file mode 100644
index d785c3a8c..000000000
--- a/target/linux/ixp4xx/patches-2.6.33/192-cambria_gpio_device.patch
+++ /dev/null
@@ -1,46 +0,0 @@
---- a/arch/arm/mach-ixp4xx/cambria-setup.c
-+++ b/arch/arm/mach-ixp4xx/cambria-setup.c
-@@ -214,6 +214,20 @@ static struct platform_device cambria_gp
- .dev.platform_data = &cambria_gpio_leds_data,
- };
-
-+static struct resource cambria_gpio_resources[] = {
-+ {
-+ .name = "gpio",
-+ .flags = 0,
-+ },
-+};
-+
-+static struct platform_device cambria_gpio = {
-+ .name = "GPIODEV",
-+ .id = -1,
-+ .num_resources = ARRAY_SIZE(cambria_gpio_resources),
-+ .resource = cambria_gpio_resources,
-+};
-+
- static struct latch_led cambria_latch_leds[] = {
- {
- .name = "ledA", /* green led */
-@@ -335,6 +349,11 @@ static void __init cambria_gw2350_setup(
- cambria_optional_uart_data[1].membase = (void __iomem *)ioremap(0x53FF0000, 0x0fff);
- cambria_optional_uart_data[1].irq = IRQ_IXP4XX_GPIO4;
-
-+ cambria_gpio_resources[0].start = (1 << 0) | (1 << 1) | (1 << 2) | (1 << 3) | (1 << 4) |\
-+ (1 << 5) | (1 << 8) | (1 << 9) | (1 << 12);
-+ cambria_gpio_resources[0].end = cambria_gpio_resources[0].start;
-+
-+ platform_device_register(&cambria_gpio);
- platform_device_register(&cambria_optional_uart);
- platform_device_register(&cambria_npec_device);
- platform_device_register(&cambria_npea_device);
-@@ -358,6 +377,10 @@ static void __init cambria_gw2358_setup(
- cambria_optional_uart_data[1].membase = (void __iomem *)ioremap(0x53F80000, 0x0fff);
- cambria_optional_uart_data[1].irq = IRQ_IXP4XX_GPIO4;
-
-+ cambria_gpio_resources[0].start = (1 << 14);
-+ cambria_gpio_resources[0].end = cambria_gpio_resources[0].start;
-+
-+ platform_device_register(&cambria_gpio);
- platform_device_register(&cambria_optional_uart);
-
- platform_device_register(&cambria_npec_device);
diff --git a/target/linux/ixp4xx/patches-2.6.33/193-cambria_pld_gpio.patch b/target/linux/ixp4xx/patches-2.6.33/193-cambria_pld_gpio.patch
deleted file mode 100644
index 299630f17..000000000
--- a/target/linux/ixp4xx/patches-2.6.33/193-cambria_pld_gpio.patch
+++ /dev/null
@@ -1,107 +0,0 @@
---- a/arch/arm/mach-ixp4xx/cambria-setup.c
-+++ b/arch/arm/mach-ixp4xx/cambria-setup.c
-@@ -12,11 +12,14 @@
- */
-
- #include <linux/device.h>
-+#include <linux/gpio_buttons.h>
- #include <linux/i2c.h>
- #include <linux/i2c-gpio.h>
- #include <linux/i2c/at24.h>
-+#include <linux/i2c/gw_i2c_pld.h>
- #include <linux/if_ether.h>
- #include <linux/init.h>
-+#include <linux/input.h>
- #include <linux/kernel.h>
- #include <linux/leds.h>
- #include <linux/memory.h>
-@@ -323,6 +326,39 @@ static struct platform_device cambria_us
- },
- };
-
-+static struct gw_i2c_pld_platform_data gw_i2c_pld_data0 = {
-+ .gpio_base = 16,
-+ .nr_gpio = 8,
-+};
-+
-+static struct gw_i2c_pld_platform_data gw_i2c_pld_data1 = {
-+ .gpio_base = 24,
-+ .nr_gpio = 2,
-+};
-+
-+
-+static struct gpio_button cambria_gpio_buttons[] = {
-+ {
-+ .desc = "user",
-+ .type = EV_KEY,
-+ .code = BTN_0,
-+ .threshold = 2,
-+ .gpio = 25,
-+ }
-+};
-+
-+static struct gpio_buttons_platform_data cambria_gpio_buttons_data = {
-+ .poll_interval = 500,
-+ .nbuttons = 1,
-+ .buttons = cambria_gpio_buttons,
-+};
-+
-+static struct platform_device cambria_gpio_buttons_device = {
-+ .name = "gpio-buttons",
-+ .id = -1,
-+ .dev.platform_data = &cambria_gpio_buttons_data,
-+};
-+
- static struct platform_device *cambria_devices[] __initdata = {
- &cambria_i2c_gpio,
- &cambria_flash,
-@@ -331,6 +367,11 @@ static struct platform_device *cambria_d
-
- static void __init cambria_gw23xx_setup(void)
- {
-+ cambria_gpio_resources[0].start = (1 << 0) | (1 << 1) | (1 << 2) | (1 << 3) | (1 << 4) |\
-+ (1 << 5) | (1 << 8) | (1 << 9) | (1 << 12);
-+ cambria_gpio_resources[0].end = cambria_gpio_resources[0].start;
-+
-+ platform_device_register(&cambria_gpio);
- platform_device_register(&cambria_npec_device);
- platform_device_register(&cambria_npea_device);
- }
-@@ -377,7 +418,8 @@ static void __init cambria_gw2358_setup(
- cambria_optional_uart_data[1].membase = (void __iomem *)ioremap(0x53F80000, 0x0fff);
- cambria_optional_uart_data[1].irq = IRQ_IXP4XX_GPIO4;
-
-- cambria_gpio_resources[0].start = (1 << 14);
-+ cambria_gpio_resources[0].start = (1 << 14) | (1 << 16) | (1 << 17) | (1 << 18) |\
-+ (1 << 19) | (1 << 20) | (1 << 24) | (1 << 25);
- cambria_gpio_resources[0].end = cambria_gpio_resources[0].start;
-
- platform_device_register(&cambria_gpio);
-@@ -391,7 +433,12 @@ static void __init cambria_gw2358_setup(
-
- platform_device_register(&cambria_pata);
-
-+ cambria_gpio_leds[0].gpio = 24;
-+ platform_device_register(&cambria_gpio_leds_device);
-+
- platform_device_register(&cambria_latch_leds_device);
-+
-+ platform_device_register(&cambria_gpio_buttons_device);
- }
-
- static struct cambria_board_info cambria_boards[] __initdata = {
-@@ -460,6 +507,14 @@ static struct i2c_board_info __initdata
- I2C_BOARD_INFO("24c08", 0x51),
- .platform_data = &cambria_eeprom_info
- },
-+ {
-+ I2C_BOARD_INFO("gw_i2c_pld", 0x56),
-+ .platform_data = &gw_i2c_pld_data0,
-+ },
-+ {
-+ I2C_BOARD_INFO("gw_i2c_pld", 0x57),
-+ .platform_data = &gw_i2c_pld_data1,
-+ },
- };
-
- static void __init cambria_init(void)
diff --git a/target/linux/ixp4xx/patches-2.6.33/201-npe_driver_print_license_location.patch b/target/linux/ixp4xx/patches-2.6.33/201-npe_driver_print_license_location.patch
deleted file mode 100644
index b97dd77dc..000000000
--- a/target/linux/ixp4xx/patches-2.6.33/201-npe_driver_print_license_location.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/arch/arm/mach-ixp4xx/ixp4xx_npe.c
-+++ b/arch/arm/mach-ixp4xx/ixp4xx_npe.c
-@@ -583,6 +583,8 @@ int npe_load_firmware(struct npe *npe, c
- npe_reset(npe);
- #endif
-
-+ print_npe(KERN_INFO, npe, "firmware's license can be found in /usr/share/doc/LICENSE.IPL\n");
-+
- print_npe(KERN_INFO, npe, "firmware functionality 0x%X, "
- "revision 0x%X:%X\n", (image->id >> 16) & 0xFF,
- (image->id >> 8) & 0xFF, image->id & 0xFF);
diff --git a/target/linux/ixp4xx/patches-2.6.33/203-npe_driver_mask_phy_features.patch b/target/linux/ixp4xx/patches-2.6.33/203-npe_driver_mask_phy_features.patch
deleted file mode 100644
index eacf35d07..000000000
--- a/target/linux/ixp4xx/patches-2.6.33/203-npe_driver_mask_phy_features.patch
+++ /dev/null
@@ -1,13 +0,0 @@
---- a/drivers/net/arm/ixp4xx_eth.c
-+++ b/drivers/net/arm/ixp4xx_eth.c
-@@ -1217,6 +1217,10 @@ static int __devinit eth_init_one(struct
- if ((err = IS_ERR(port->phydev)))
- goto err_free_mem;
-
-+ /* mask with MAC supported features */
-+ port->phydev->supported &= PHY_BASIC_FEATURES;
-+ port->phydev->advertising = port->phydev->supported;
-+
- port->phydev->irq = PHY_POLL;
-
- if ((err = register_netdev(dev)))
diff --git a/target/linux/ixp4xx/patches-2.6.33/205-npe_driver_separate_phy_functions.patch b/target/linux/ixp4xx/patches-2.6.33/205-npe_driver_separate_phy_functions.patch
deleted file mode 100644
index b9835a012..000000000
--- a/target/linux/ixp4xx/patches-2.6.33/205-npe_driver_separate_phy_functions.patch
+++ /dev/null
@@ -1,119 +0,0 @@
---- a/drivers/net/arm/ixp4xx_eth.c
-+++ b/drivers/net/arm/ixp4xx_eth.c
-@@ -396,6 +396,50 @@ static void ixp4xx_adjust_link(struct ne
- dev->name, port->speed, port->duplex ? "full" : "half");
- }
-
-+static int ixp4xx_phy_connect(struct net_device *dev)
-+{
-+ struct port *port = netdev_priv(dev);
-+ struct eth_plat_info *plat = port->plat;
-+ char phy_id[MII_BUS_ID_SIZE + 3];
-+
-+ snprintf(phy_id, MII_BUS_ID_SIZE + 3, PHY_ID_FMT, "0", plat->phy);
-+ port->phydev = phy_connect(dev, phy_id, &ixp4xx_adjust_link, 0,
-+ PHY_INTERFACE_MODE_MII);
-+ if (IS_ERR(port->phydev)) {
-+ printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name);
-+ return PTR_ERR(port->phydev);
-+ }
-+
-+ /* mask with MAC supported features */
-+ port->phydev->supported &= PHY_BASIC_FEATURES;
-+ port->phydev->advertising = port->phydev->supported;
-+
-+ port->phydev->irq = PHY_POLL;
-+
-+ return 0;
-+}
-+
-+static void ixp4xx_phy_disconnect(struct net_device *dev)
-+{
-+ struct port *port = netdev_priv(dev);
-+
-+ phy_disconnect(port->phydev);
-+}
-+
-+static void ixp4xx_phy_start(struct net_device *dev)
-+{
-+ struct port *port = netdev_priv(dev);
-+
-+ port->speed = 0; /* force "link up" message */
-+ phy_start(port->phydev);
-+}
-+
-+static void ixp4xx_phy_stop(struct net_device *dev)
-+{
-+ struct port *port = netdev_priv(dev);
-+
-+ phy_stop(port->phydev);
-+}
-
- static inline void debug_pkt(struct net_device *dev, const char *func,
- u8 *data, int len)
-@@ -1005,8 +1049,7 @@ static int eth_open(struct net_device *d
- return err;
- }
-
-- port->speed = 0; /* force "link up" message */
-- phy_start(port->phydev);
-+ ixp4xx_phy_start(dev);
-
- for (i = 0; i < ETH_ALEN; i++)
- __raw_writel(dev->dev_addr[i], &port->regs->hw_addr[i]);
-@@ -1127,7 +1170,7 @@ static int eth_close(struct net_device *
- printk(KERN_CRIT "%s: unable to disable loopback\n",
- dev->name);
-
-- phy_stop(port->phydev);
-+ ixp4xx_phy_stop(dev);
-
- if (!ports_open)
- qmgr_disable_irq(TXDONE_QUEUE);
-@@ -1153,7 +1196,6 @@ static int __devinit eth_init_one(struct
- struct net_device *dev;
- struct eth_plat_info *plat = pdev->dev.platform_data;
- u32 regs_phys;
-- char phy_id[MII_BUS_ID_SIZE + 3];
- int err;
-
- if (!(dev = alloc_etherdev(sizeof(struct port))))
-@@ -1211,18 +1253,10 @@ static int __devinit eth_init_one(struct
- __raw_writel(DEFAULT_CORE_CNTRL, &port->regs->core_control);
- udelay(50);
-
-- snprintf(phy_id, MII_BUS_ID_SIZE + 3, PHY_ID_FMT, "0", plat->phy);
-- port->phydev = phy_connect(dev, phy_id, &ixp4xx_adjust_link, 0,
-- PHY_INTERFACE_MODE_MII);
-- if ((err = IS_ERR(port->phydev)))
-+ err = ixp4xx_phy_connect(dev);
-+ if (err)
- goto err_free_mem;
-
-- /* mask with MAC supported features */
-- port->phydev->supported &= PHY_BASIC_FEATURES;
-- port->phydev->advertising = port->phydev->supported;
--
-- port->phydev->irq = PHY_POLL;
--
- if ((err = register_netdev(dev)))
- goto err_phy_dis;
-
-@@ -1232,7 +1266,7 @@ static int __devinit eth_init_one(struct
- return 0;
-
- err_phy_dis:
-- phy_disconnect(port->phydev);
-+ ixp4xx_phy_disconnect(port->phydev);
- err_free_mem:
- npe_port_tab[NPE_ID(port->id)] = NULL;
- platform_set_drvdata(pdev, NULL);
-@@ -1250,7 +1284,7 @@ static int __devexit eth_remove_one(stru
- struct port *port = netdev_priv(dev);
-
- unregister_netdev(dev);
-- phy_disconnect(port->phydev);
-+ ixp4xx_phy_disconnect(dev);
- npe_port_tab[NPE_ID(port->id)] = NULL;
- platform_set_drvdata(pdev, NULL);
- npe_release(port->npe);
diff --git a/target/linux/ixp4xx/patches-2.6.33/206-npe_driver_add_update_link_function.patch b/target/linux/ixp4xx/patches-2.6.33/206-npe_driver_add_update_link_function.patch
deleted file mode 100644
index 419ec4cdb..000000000
--- a/target/linux/ixp4xx/patches-2.6.33/206-npe_driver_add_update_link_function.patch
+++ /dev/null
@@ -1,98 +0,0 @@
---- a/drivers/net/arm/ixp4xx_eth.c
-+++ b/drivers/net/arm/ixp4xx_eth.c
-@@ -168,7 +168,7 @@ struct port {
- struct desc *desc_tab; /* coherent */
- u32 desc_tab_phys;
- int id; /* logical port ID */
-- int speed, duplex;
-+ int link, speed, duplex;
- u8 firmware[4];
- };
-
-@@ -365,37 +365,52 @@ static void ixp4xx_mdio_remove(void)
- mdiobus_free(mdio_bus);
- }
-
--
--static void ixp4xx_adjust_link(struct net_device *dev)
-+static void ixp4xx_update_link(struct net_device *dev)
- {
- struct port *port = netdev_priv(dev);
-- struct phy_device *phydev = port->phydev;
-
-- if (!phydev->link) {
-- if (port->speed) {
-- port->speed = 0;
-- printk(KERN_INFO "%s: link down\n", dev->name);
-- }
-+ if (!port->link) {
-+ netif_carrier_off(dev);
-+ printk(KERN_INFO "%s: link down\n", dev->name);
- return;
- }
-
-- if (port->speed == phydev->speed && port->duplex == phydev->duplex)
-- return;
--
-- port->speed = phydev->speed;
-- port->duplex = phydev->duplex;
--
-- if (port->duplex)
-+ if (port->duplex == DUPLEX_FULL)
- __raw_writel(DEFAULT_TX_CNTRL0 & ~TX_CNTRL0_HALFDUPLEX,
- &port->regs->tx_control[0]);
- else
- __raw_writel(DEFAULT_TX_CNTRL0 | TX_CNTRL0_HALFDUPLEX,
- &port->regs->tx_control[0]);
-
-+ netif_carrier_on(dev);
- printk(KERN_INFO "%s: link up, speed %u Mb/s, %s duplex\n",
- dev->name, port->speed, port->duplex ? "full" : "half");
- }
-
-+static void ixp4xx_adjust_link(struct net_device *dev)
-+{
-+ struct port *port = netdev_priv(dev);
-+ struct phy_device *phydev = port->phydev;
-+ int status_change = 0;
-+
-+ if (phydev->link) {
-+ if (port->duplex != phydev->duplex
-+ || port->speed != phydev->speed) {
-+ status_change = 1;
-+ }
-+ }
-+
-+ if (phydev->link != port->link)
-+ status_change = 1;
-+
-+ port->link = phydev->link;
-+ port->speed = phydev->speed;
-+ port->duplex = phydev->duplex;
-+
-+ if (status_change)
-+ ixp4xx_update_link(dev);
-+}
-+
- static int ixp4xx_phy_connect(struct net_device *dev)
- {
- struct port *port = netdev_priv(dev);
-@@ -430,7 +445,6 @@ static void ixp4xx_phy_start(struct net_
- {
- struct port *port = netdev_priv(dev);
-
-- port->speed = 0; /* force "link up" message */
- phy_start(port->phydev);
- }
-
-@@ -1260,6 +1274,10 @@ static int __devinit eth_init_one(struct
- if ((err = register_netdev(dev)))
- goto err_phy_dis;
-
-+ port->link = 0;
-+ port->speed = 0;
-+ port->duplex = -1;
-+
- printk(KERN_INFO "%s: MII PHY %i on %s\n", dev->name, plat->phy,
- npe_name(port->npe));
-
diff --git a/target/linux/ixp4xx/patches-2.6.33/207-npe_driver_multiphy_support.patch b/target/linux/ixp4xx/patches-2.6.33/207-npe_driver_multiphy_support.patch
deleted file mode 100644
index afcf7e156..000000000
--- a/target/linux/ixp4xx/patches-2.6.33/207-npe_driver_multiphy_support.patch
+++ /dev/null
@@ -1,155 +0,0 @@
-TODO: take care of additional PHYs through the PHY abstraction layer
-
---- a/arch/arm/mach-ixp4xx/include/mach/platform.h
-+++ b/arch/arm/mach-ixp4xx/include/mach/platform.h
-@@ -72,7 +72,7 @@ extern unsigned long ixp4xx_exp_bus_size
- /*
- * Clock Speed Definitions.
- */
--#define IXP4XX_PERIPHERAL_BUS_CLOCK (66) /* 66Mhzi APB BUS */
-+#define IXP4XX_PERIPHERAL_BUS_CLOCK (66) /* 66Mhzi APB BUS */
- #define IXP4XX_UART_XTAL 14745600
-
- /*
-@@ -95,12 +95,23 @@ struct sys_timer;
- #define IXP4XX_ETH_NPEB 0x10
- #define IXP4XX_ETH_NPEC 0x20
-
-+#define IXP4XX_ETH_PHY_MAX_ADDR 32
-+
- /* Information about built-in Ethernet MAC interfaces */
- struct eth_plat_info {
- u8 phy; /* MII PHY ID, 0 - 31 */
- u8 rxq; /* configurable, currently 0 - 31 only */
- u8 txreadyq;
- u8 hwaddr[6];
-+
-+ u32 phy_mask;
-+#if 0
-+ int speed;
-+ int duplex;
-+#else
-+ int speed_10;
-+ int half_duplex;
-+#endif
- };
-
- /* Information about built-in HSS (synchronous serial) interfaces */
---- a/drivers/net/arm/ixp4xx_eth.c
-+++ b/drivers/net/arm/ixp4xx_eth.c
-@@ -417,6 +417,37 @@ static int ixp4xx_phy_connect(struct net
- struct eth_plat_info *plat = port->plat;
- char phy_id[MII_BUS_ID_SIZE + 3];
-
-+ if (plat->phy == IXP4XX_ETH_PHY_MAX_ADDR) {
-+#if 0
-+ switch (plat->speed) {
-+ case SPEED_10:
-+ case SPEED_100:
-+ break;
-+ default:
-+ printk(KERN_ERR "%s: invalid speed (%d)\n",
-+ dev->name, plat->speed);
-+ return -EINVAL;
-+ }
-+
-+ switch (plat->duplex) {
-+ case DUPLEX_HALF:
-+ case DUPLEX_FULL:
-+ break;
-+ default:
-+ printk(KERN_ERR "%s: invalid duplex mode (%d)\n",
-+ dev->name, plat->duplex);
-+ return -EINVAL;
-+ }
-+ port->speed = plat->speed;
-+ port->duplex = plat->duplex;
-+#else
-+ port->speed = plat->speed_10 ? SPEED_10 : SPEED_100;
-+ port->duplex = plat->half_duplex ? DUPLEX_HALF : DUPLEX_FULL;
-+#endif
-+
-+ return 0;
-+ }
-+
- snprintf(phy_id, MII_BUS_ID_SIZE + 3, PHY_ID_FMT, "0", plat->phy);
- port->phydev = phy_connect(dev, phy_id, &ixp4xx_adjust_link, 0,
- PHY_INTERFACE_MODE_MII);
-@@ -438,21 +469,32 @@ static void ixp4xx_phy_disconnect(struct
- {
- struct port *port = netdev_priv(dev);
-
-- phy_disconnect(port->phydev);
-+ if (port->phydev)
-+ phy_disconnect(port->phydev);
- }
-
- static void ixp4xx_phy_start(struct net_device *dev)
- {
- struct port *port = netdev_priv(dev);
-
-- phy_start(port->phydev);
-+ if (port->phydev) {
-+ phy_start(port->phydev);
-+ } else {
-+ port->link = 1;
-+ ixp4xx_update_link(dev);
-+ }
- }
-
- static void ixp4xx_phy_stop(struct net_device *dev)
- {
- struct port *port = netdev_priv(dev);
-
-- phy_stop(port->phydev);
-+ if (port->phydev) {
-+ phy_stop(port->phydev);
-+ } else {
-+ port->link = 0;
-+ ixp4xx_update_link(dev);
-+ }
- }
-
- static inline void debug_pkt(struct net_device *dev, const char *func,
-@@ -826,6 +868,10 @@ static int eth_ioctl(struct net_device *
-
- if (!netif_running(dev))
- return -EINVAL;
-+
-+ if (!port->phydev)
-+ return -EOPNOTSUPP;
-+
- return phy_mii_ioctl(port->phydev, if_mii(req), cmd);
- }
-
-@@ -845,18 +891,30 @@ static void ixp4xx_get_drvinfo(struct ne
- static int ixp4xx_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
- {
- struct port *port = netdev_priv(dev);
-+
-+ if (!port->phydev)
-+ return -EOPNOTSUPP;
-+
- return phy_ethtool_gset(port->phydev, cmd);
- }
-
- static int ixp4xx_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
- {
- struct port *port = netdev_priv(dev);
-+
-+ if (!port->phydev)
-+ return -EOPNOTSUPP;
-+
- return phy_ethtool_sset(port->phydev, cmd);
- }
-
- static int ixp4xx_nway_reset(struct net_device *dev)
- {
- struct port *port = netdev_priv(dev);
-+
-+ if (!port->phydev)
-+ return -EOPNOTSUPP;
-+
- return phy_start_aneg(port->phydev);
- }
-
diff --git a/target/linux/ixp4xx/patches-2.6.33/295-latch_led_driver.patch b/target/linux/ixp4xx/patches-2.6.33/295-latch_led_driver.patch
deleted file mode 100644
index 64be0c309..000000000
--- a/target/linux/ixp4xx/patches-2.6.33/295-latch_led_driver.patch
+++ /dev/null
@@ -1,200 +0,0 @@
---- a/drivers/leds/Kconfig
-+++ b/drivers/leds/Kconfig
-@@ -157,6 +157,13 @@ config LEDS_LP3944
- To compile this driver as a module, choose M here: the
- module will be called leds-lp3944.
-
-+config LEDS_LATCH
-+ tristate "LED Support for Memory Latched LEDs"
-+ depends on LEDS_CLASS
-+ help
-+ -- To Do --
-+
-+
- config LEDS_CLEVO_MAIL
- tristate "Mail LED on Clevo notebook"
- depends on LEDS_CLASS && X86 && SERIO_I8042 && DMI
---- /dev/null
-+++ b/drivers/leds/leds-latch.c
-@@ -0,0 +1,149 @@
-+/*
-+ * LEDs driver for Memory Latched Devices
-+ *
-+ * Copyright (C) 2008 Gateworks Corp.
-+ * Chris Lang <clang@gateworks.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+#include <linux/leds.h>
-+#include <linux/workqueue.h>
-+#include <asm/io.h>
-+#include <linux/spinlock.h>
-+
-+static unsigned int mem_keep = 0xFF;
-+static spinlock_t mem_lock;
-+static unsigned char *iobase;
-+
-+struct latch_led_data {
-+ struct led_classdev cdev;
-+ struct work_struct work;
-+ u8 new_level;
-+ u8 bit;
-+ void (*set_led)(u8 bit, enum led_brightness value);
-+};
-+
-+static void latch_set_led(u8 bit, enum led_brightness value)
-+{
-+ if (value == LED_OFF)
-+ mem_keep |= (0x1 << bit);
-+ else
-+ mem_keep &= ~(0x1 << bit);
-+
-+ writeb(mem_keep, iobase);
-+}
-+
-+static void latch_led_set(struct led_classdev *led_cdev,
-+ enum led_brightness value)
-+{
-+ struct latch_led_data *led_dat =
-+ container_of(led_cdev, struct latch_led_data, cdev);
-+
-+ raw_spin_lock(mem_lock);
-+
-+ led_dat->set_led(led_dat->bit, value);
-+
-+ raw_spin_unlock(mem_lock);
-+}
-+
-+static int latch_led_probe(struct platform_device *pdev)
-+{
-+ struct latch_led_platform_data *pdata = pdev->dev.platform_data;
-+ struct latch_led *cur_led;
-+ struct latch_led_data *leds_data, *led_dat;
-+ int i, ret = 0;
-+
-+ if (!pdata)
-+ return -EBUSY;
-+
-+ leds_data = kzalloc(sizeof(struct latch_led_data) * pdata->num_leds,
-+ GFP_KERNEL);
-+ if (!leds_data)
-+ return -ENOMEM;
-+
-+ for (i = 0; i < pdata->num_leds; i++) {
-+ cur_led = &pdata->leds[i];
-+ led_dat = &leds_data[i];
-+
-+ led_dat->cdev.name = cur_led->name;
-+ led_dat->cdev.default_trigger = cur_led->default_trigger;
-+ led_dat->cdev.brightness_set = latch_led_set;
-+ led_dat->cdev.brightness = LED_OFF;
-+ led_dat->bit = cur_led->bit;
-+ led_dat->set_led = pdata->set_led ? pdata->set_led : latch_set_led;
-+
-+ ret = led_classdev_register(&pdev->dev, &led_dat->cdev);
-+ if (ret < 0) {
-+ goto err;
-+ }
-+ }
-+
-+ if (!pdata->set_led) {
-+ iobase = ioremap_nocache(pdata->mem, 0x1000);
-+ writeb(0xFF, iobase);
-+ }
-+ platform_set_drvdata(pdev, leds_data);
-+
-+ return 0;
-+
-+err:
-+ if (i > 0) {
-+ for (i = i - 1; i >= 0; i--) {
-+ led_classdev_unregister(&leds_data[i].cdev);
-+ }
-+ }
-+
-+ kfree(leds_data);
-+
-+ return ret;
-+}
-+
-+static int __devexit latch_led_remove(struct platform_device *pdev)
-+{
-+ int i;
-+ struct latch_led_platform_data *pdata = pdev->dev.platform_data;
-+ struct latch_led_data *leds_data;
-+
-+ leds_data = platform_get_drvdata(pdev);
-+
-+ for (i = 0; i < pdata->num_leds; i++) {
-+ led_classdev_unregister(&leds_data[i].cdev);
-+ cancel_work_sync(&leds_data[i].work);
-+ }
-+
-+ kfree(leds_data);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver latch_led_driver = {
-+ .probe = latch_led_probe,
-+ .remove = __devexit_p(latch_led_remove),
-+ .driver = {
-+ .name = "leds-latch",
-+ .owner = THIS_MODULE,
-+ },
-+};
-+
-+static int __init latch_led_init(void)
-+{
-+ return platform_driver_register(&latch_led_driver);
-+}
-+
-+static void __exit latch_led_exit(void)
-+{
-+ platform_driver_unregister(&latch_led_driver);
-+}
-+
-+module_init(latch_led_init);
-+module_exit(latch_led_exit);
-+
-+MODULE_AUTHOR("Chris Lang <clang@gateworks.com>");
-+MODULE_DESCRIPTION("Latch LED driver");
-+MODULE_LICENSE("GPL");
---- a/drivers/leds/Makefile
-+++ b/drivers/leds/Makefile
-@@ -20,6 +20,7 @@ obj-$(CONFIG_LEDS_COBALT_RAQ) += leds-c
- obj-$(CONFIG_LEDS_SUNFIRE) += leds-sunfire.o
- obj-$(CONFIG_LEDS_PCA9532) += leds-pca9532.o
- obj-$(CONFIG_LEDS_GPIO) += leds-gpio.o
-+obj-$(CONFIG_LEDS_LATCH) += leds-latch.o
- obj-$(CONFIG_LEDS_LP3944) += leds-lp3944.o
- obj-$(CONFIG_LEDS_CLEVO_MAIL) += leds-clevo-mail.o
- obj-$(CONFIG_LEDS_HP6XX) += leds-hp6xx.o
---- a/include/linux/leds.h
-+++ b/include/linux/leds.h
-@@ -161,5 +161,19 @@ struct gpio_led_platform_data {
- unsigned long *delay_off);
- };
-
-+/* For the leds-latch driver */
-+struct latch_led {
-+ const char *name;
-+ char *default_trigger;
-+ unsigned bit;
-+};
-+
-+struct latch_led_platform_data {
-+ int num_leds;
-+ u32 mem;
-+ struct latch_led *leds;
-+ void (*set_led)(u8 bit, enum led_brightness value);
-+};
-+
-
- #endif /* __LINUX_LEDS_H_INCLUDED */
diff --git a/target/linux/ixp4xx/patches-2.6.33/300-avila_fetch_mac.patch b/target/linux/ixp4xx/patches-2.6.33/300-avila_fetch_mac.patch
deleted file mode 100644
index 329fd9573..000000000
--- a/target/linux/ixp4xx/patches-2.6.33/300-avila_fetch_mac.patch
+++ /dev/null
@@ -1,244 +0,0 @@
---- a/arch/arm/mach-ixp4xx/avila-setup.c
-+++ b/arch/arm/mach-ixp4xx/avila-setup.c
-@@ -14,10 +14,16 @@
- #include <linux/kernel.h>
- #include <linux/init.h>
- #include <linux/device.h>
-+#include <linux/if_ether.h>
-+#include <linux/socket.h>
-+#include <linux/netdevice.h>
- #include <linux/serial.h>
- #include <linux/tty.h>
- #include <linux/serial_8250.h>
- #include <linux/slab.h>
-+#include <linux/i2c.h>
-+#include <linux/i2c/at24.h>
-+
- #include <linux/i2c-gpio.h>
- #include <asm/types.h>
- #include <asm/setup.h>
-@@ -31,6 +37,13 @@
- #define AVILA_SDA_PIN 7
- #define AVILA_SCL_PIN 6
-
-+struct avila_board_info {
-+ unsigned char *model;
-+ void (*setup)(void);
-+};
-+
-+static struct avila_board_info *avila_info __initdata;
-+
- static struct flash_platform_data avila_flash_data = {
- .map_name = "cfi_probe",
- .width = 2,
-@@ -134,16 +147,181 @@ static struct platform_device avila_pata
- .resource = avila_pata_resources,
- };
-
-+/* Built-in 10/100 Ethernet MAC interfaces */
-+static struct eth_plat_info avila_npeb_data = {
-+ .phy = 0,
-+ .rxq = 3,
-+ .txreadyq = 20,
-+};
-+
-+static struct eth_plat_info avila_npec_data = {
-+ .phy = 1,
-+ .rxq = 4,
-+ .txreadyq = 21,
-+};
-+
-+static struct platform_device avila_npeb_device = {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEB,
-+ .dev.platform_data = &avila_npeb_data,
-+};
-+
-+static struct platform_device avila_npec_device = {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEC,
-+ .dev.platform_data = &avila_npec_data,
-+};
-+
- static struct platform_device *avila_devices[] __initdata = {
- &avila_i2c_gpio,
- &avila_flash,
- &avila_uart
- };
-
-+static void __init avila_gw23xx_setup(void)
-+{
-+ platform_device_register(&avila_npeb_device);
-+ platform_device_register(&avila_npec_device);
-+}
-+
-+static void __init avila_gw2342_setup(void)
-+{
-+ platform_device_register(&avila_npeb_device);
-+ platform_device_register(&avila_npec_device);
-+}
-+
-+static void __init avila_gw2345_setup(void)
-+{
-+ avila_npeb_data.phy = IXP4XX_ETH_PHY_MAX_ADDR;
-+ avila_npeb_data.phy_mask = 0x1e; /* ports 1-4 of the KS8995 switch */
-+ platform_device_register(&avila_npeb_device);
-+
-+ avila_npec_data.phy = 5; /* port 5 of the KS8995 switch */
-+ platform_device_register(&avila_npec_device);
-+}
-+
-+static void __init avila_gw2347_setup(void)
-+{
-+ platform_device_register(&avila_npeb_device);
-+}
-+
-+static void __init avila_gw2348_setup(void)
-+{
-+ platform_device_register(&avila_npeb_device);
-+ platform_device_register(&avila_npec_device);
-+}
-+
-+static void __init avila_gw2353_setup(void)
-+{
-+ platform_device_register(&avila_npeb_device);
-+}
-+
-+static void __init avila_gw2355_setup(void)
-+{
-+ avila_npeb_data.phy = IXP4XX_ETH_PHY_MAX_ADDR;
-+ avila_npeb_data.phy_mask = 0x1e; /* ports 1-4 of the KS8995 switch */
-+ platform_device_register(&avila_npeb_device);
-+
-+ avila_npec_data.phy = 16;
-+ platform_device_register(&avila_npec_device);
-+}
-+
-+static void __init avila_gw2357_setup(void)
-+{
-+ platform_device_register(&avila_npeb_device);
-+}
-+
-+static struct avila_board_info avila_boards[] __initdata = {
-+ {
-+ .model = "GW2342",
-+ .setup = avila_gw2342_setup,
-+ }, {
-+ .model = "GW2345",
-+ .setup = avila_gw2345_setup,
-+ }, {
-+ .model = "GW2347",
-+ .setup = avila_gw2347_setup,
-+ }, {
-+ .model = "GW2348",
-+ .setup = avila_gw2348_setup,
-+ }, {
-+ .model = "GW2353",
-+ .setup = avila_gw2353_setup,
-+ }, {
-+ .model = "GW2355",
-+ .setup = avila_gw2355_setup,
-+ }, {
-+ .model = "GW2357",
-+ .setup = avila_gw2357_setup,
-+ }
-+};
-+
-+static struct avila_board_info * __init avila_find_board_info(char *model)
-+{
-+ int i;
-+ model[6] = '\0';
-+
-+ for (i = 0; i < ARRAY_SIZE(avila_boards); i++) {
-+ struct avila_board_info *info = &avila_boards[i];
-+ if (strcmp(info->model, model) == 0)
-+ return info;
-+ }
-+
-+ return NULL;
-+}
-+
-+static struct memory_accessor *at24_mem_acc;
-+
-+static void at24_setup(struct memory_accessor *mem_acc, void *context)
-+{
-+ char mac_addr[ETH_ALEN];
-+ char model[7];
-+
-+ at24_mem_acc = mem_acc;
-+
-+ /* Read MAC addresses */
-+ if (at24_mem_acc->read(at24_mem_acc, mac_addr, 0x0, 6) == 6) {
-+ memcpy(&avila_npeb_data.hwaddr, mac_addr, ETH_ALEN);
-+ }
-+ if (at24_mem_acc->read(at24_mem_acc, mac_addr, 0x6, 6) == 6) {
-+ memcpy(&avila_npec_data.hwaddr, mac_addr, ETH_ALEN);
-+ }
-+
-+ /* Read the first 6 bytes of the model number */
-+ if (at24_mem_acc->read(at24_mem_acc, model, 0x20, 6) == 6) {
-+ avila_info = avila_find_board_info(model);
-+ }
-+
-+}
-+
-+static struct at24_platform_data avila_eeprom_info = {
-+ .byte_len = 1024,
-+ .page_size = 16,
-+ .flags = AT24_FLAG_READONLY,
-+ .setup = at24_setup,
-+};
-+
-+static struct i2c_board_info __initdata avila_i2c_board_info[] = {
-+ {
-+ I2C_BOARD_INFO("ds1672", 0x68),
-+ },
-+ {
-+ I2C_BOARD_INFO("ad7418", 0x28),
-+ },
-+ {
-+ I2C_BOARD_INFO("24c08", 0x51),
-+ .platform_data = &avila_eeprom_info
-+ },
-+};
-+
- static void __init avila_init(void)
- {
- ixp4xx_sys_init();
-
-+ /*
-+ * These devices are present on all Avila models and don't need any
-+ * model specific setup.
-+ */
- avila_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
- avila_flash_resource.end =
- IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
-@@ -161,7 +339,28 @@ static void __init avila_init(void)
-
- platform_device_register(&avila_pata);
-
-+ i2c_register_board_info(0, avila_i2c_board_info,
-+ ARRAY_SIZE(avila_i2c_board_info));
-+}
-+
-+static int __init avila_model_setup(void)
-+{
-+ if (!machine_is_avila())
-+ return 0;
-+
-+ if (avila_info) {
-+ printk(KERN_DEBUG "Running on Gateworks Avila %s\n",
-+ avila_info->model);
-+ avila_info->setup();
-+ } else {
-+ printk(KERN_INFO "Unknown/missing Avila model number"
-+ " -- defaults will be used\n");
-+ avila_gw23xx_setup();
-+ }
-+
-+ return 0;
- }
-+late_initcall(avila_model_setup);
-
- MACHINE_START(AVILA, "Gateworks Avila Network Platform")
- /* Maintainer: Deepak Saxena <dsaxena@plexity.net> */
diff --git a/target/linux/ixp4xx/patches-2.6.33/301-avila_led.patch b/target/linux/ixp4xx/patches-2.6.33/301-avila_led.patch
deleted file mode 100644
index cc5fadeed..000000000
--- a/target/linux/ixp4xx/patches-2.6.33/301-avila_led.patch
+++ /dev/null
@@ -1,161 +0,0 @@
---- a/arch/arm/mach-ixp4xx/avila-setup.c
-+++ b/arch/arm/mach-ixp4xx/avila-setup.c
-@@ -24,6 +24,7 @@
- #include <linux/i2c.h>
- #include <linux/i2c/at24.h>
-
-+#include <linux/leds.h>
- #include <linux/i2c-gpio.h>
- #include <asm/types.h>
- #include <asm/setup.h>
-@@ -172,6 +173,72 @@ static struct platform_device avila_npec
- .dev.platform_data = &avila_npec_data,
- };
-
-+static struct gpio_led avila_gpio_leds[] = {
-+ {
-+ .name = "user", /* green led */
-+ .gpio = AVILA_GW23XX_LED_USER_GPIO,
-+ .active_low = 1,
-+ }
-+};
-+
-+static struct gpio_led_platform_data avila_gpio_leds_data = {
-+ .num_leds = 1,
-+ .leds = avila_gpio_leds,
-+};
-+
-+static struct platform_device avila_gpio_leds_device = {
-+ .name = "leds-gpio",
-+ .id = -1,
-+ .dev.platform_data = &avila_gpio_leds_data,
-+};
-+
-+static struct latch_led avila_latch_leds[] = {
-+ {
-+ .name = "led0", /* green led */
-+ .bit = 0,
-+ },
-+ {
-+ .name = "led1", /* green led */
-+ .bit = 1,
-+ },
-+ {
-+ .name = "led2", /* green led */
-+ .bit = 2,
-+ },
-+ {
-+ .name = "led3", /* green led */
-+ .bit = 3,
-+ },
-+ {
-+ .name = "led4", /* green led */
-+ .bit = 4,
-+ },
-+ {
-+ .name = "led5", /* green led */
-+ .bit = 5,
-+ },
-+ {
-+ .name = "led6", /* green led */
-+ .bit = 6,
-+ },
-+ {
-+ .name = "led7", /* green led */
-+ .bit = 7,
-+ }
-+};
-+
-+static struct latch_led_platform_data avila_latch_leds_data = {
-+ .num_leds = 8,
-+ .leds = avila_latch_leds,
-+ .mem = 0x51000000,
-+};
-+
-+static struct platform_device avila_latch_leds_device = {
-+ .name = "leds-latch",
-+ .id = -1,
-+ .dev.platform_data = &avila_latch_leds_data,
-+};
-+
- static struct platform_device *avila_devices[] __initdata = {
- &avila_i2c_gpio,
- &avila_flash,
-@@ -182,12 +249,16 @@ static void __init avila_gw23xx_setup(vo
- {
- platform_device_register(&avila_npeb_device);
- platform_device_register(&avila_npec_device);
-+
-+ platform_device_register(&avila_gpio_leds_device);
- }
-
- static void __init avila_gw2342_setup(void)
- {
- platform_device_register(&avila_npeb_device);
- platform_device_register(&avila_npec_device);
-+
-+ platform_device_register(&avila_gpio_leds_device);
- }
-
- static void __init avila_gw2345_setup(void)
-@@ -198,22 +269,30 @@ static void __init avila_gw2345_setup(vo
-
- avila_npec_data.phy = 5; /* port 5 of the KS8995 switch */
- platform_device_register(&avila_npec_device);
-+
-+ platform_device_register(&avila_gpio_leds_device);
- }
-
- static void __init avila_gw2347_setup(void)
- {
- platform_device_register(&avila_npeb_device);
-+
-+ avila_gpio_leds[0].gpio = AVILA_GW23X7_LED_USER_GPIO;
-+ platform_device_register(&avila_gpio_leds_device);
- }
-
- static void __init avila_gw2348_setup(void)
- {
- platform_device_register(&avila_npeb_device);
- platform_device_register(&avila_npec_device);
-+
-+ platform_device_register(&avila_gpio_leds_device);
- }
-
- static void __init avila_gw2353_setup(void)
- {
- platform_device_register(&avila_npeb_device);
-+ platform_device_register(&avila_gpio_leds_device);
- }
-
- static void __init avila_gw2355_setup(void)
-@@ -224,11 +303,29 @@ static void __init avila_gw2355_setup(vo
-
- avila_npec_data.phy = 16;
- platform_device_register(&avila_npec_device);
-+
-+ platform_device_register(&avila_gpio_leds_device);
-+
-+ *IXP4XX_EXP_CS4 |= 0xbfff3c03;
-+ avila_latch_leds[0].name = "RXD";
-+ avila_latch_leds[1].name = "TXD";
-+ avila_latch_leds[2].name = "POL";
-+ avila_latch_leds[3].name = "LNK";
-+ avila_latch_leds[4].name = "ERR";
-+ avila_latch_leds_data.num_leds = 5;
-+ avila_latch_leds_data.mem = 0x54000000;
-+ platform_device_register(&avila_latch_leds_device);
- }
-
- static void __init avila_gw2357_setup(void)
- {
- platform_device_register(&avila_npeb_device);
-+
-+ avila_gpio_leds[0].gpio = AVILA_GW23X7_LED_USER_GPIO;
-+ platform_device_register(&avila_gpio_leds_device);
-+
-+ *IXP4XX_EXP_CS1 |= 0xbfff3c03;
-+ platform_device_register(&avila_latch_leds_device);
- }
-
- static struct avila_board_info avila_boards[] __initdata = {
diff --git a/target/linux/ixp4xx/patches-2.6.33/302-avila_gpio_device.patch b/target/linux/ixp4xx/patches-2.6.33/302-avila_gpio_device.patch
deleted file mode 100644
index f941a94bc..000000000
--- a/target/linux/ixp4xx/patches-2.6.33/302-avila_gpio_device.patch
+++ /dev/null
@@ -1,16 +0,0 @@
---- a/arch/arm/mach-ixp4xx/avila-setup.c
-+++ b/arch/arm/mach-ixp4xx/avila-setup.c
-@@ -38,6 +38,13 @@
- #define AVILA_SDA_PIN 7
- #define AVILA_SCL_PIN 6
-
-+/* User LEDs */
-+#define AVILA_GW23XX_LED_USER_GPIO 3
-+#define AVILA_GW23X7_LED_USER_GPIO 4
-+
-+/* gpio mask used by platform device */
-+#define AVILA_GPIO_MASK (1 << 1) | (1 << 3) | (1 << 5) | (1 << 7) | (1 << 9)
-+
- struct avila_board_info {
- unsigned char *model;
- void (*setup)(void);
diff --git a/target/linux/ixp4xx/patches-2.6.33/304-ixp4xx_eth_jumboframe.patch b/target/linux/ixp4xx/patches-2.6.33/304-ixp4xx_eth_jumboframe.patch
deleted file mode 100644
index a9cbddcf5..000000000
--- a/target/linux/ixp4xx/patches-2.6.33/304-ixp4xx_eth_jumboframe.patch
+++ /dev/null
@@ -1,80 +0,0 @@
---- a/drivers/net/arm/ixp4xx_eth.c
-+++ b/drivers/net/arm/ixp4xx_eth.c
-@@ -52,7 +52,7 @@
-
- #define POOL_ALLOC_SIZE (sizeof(struct desc) * (RX_DESCS + TX_DESCS))
- #define REGS_SIZE 0x1000
--#define MAX_MRU 1536 /* 0x600 */
-+#define MAX_MRU (14320 - ETH_HLEN - ETH_FCS_LEN)
- #define RX_BUFF_SIZE ALIGN((NET_IP_ALIGN) + MAX_MRU, 4)
-
- #define NAPI_WEIGHT 16
-@@ -1061,6 +1061,32 @@ static void destroy_queues(struct port *
- }
- }
-
-+static int eth_do_change_mtu(struct net_device *dev, int mtu)
-+{
-+ struct port *port;
-+ struct msg msg;
-+ /* adjust for ethernet headers */
-+ int framesize = mtu + ETH_HLEN + ETH_FCS_LEN;
-+
-+ port = netdev_priv(dev);
-+
-+ memset(&msg, 0, sizeof(msg));
-+ msg.cmd = NPE_SETMAXFRAMELENGTHS;
-+ msg.eth_id = port->id;
-+
-+ /* max rx/tx 64 byte blocks */
-+ msg.byte2 = ((framesize + 63) / 64) << 8;
-+ msg.byte3 = ((framesize + 63) / 64) << 8;
-+
-+ msg.byte4 = msg.byte6 = framesize >> 8;
-+ msg.byte5 = msg.byte7 = framesize & 0xff;
-+
-+ if (npe_send_recv_message(port->npe, &msg, "ETH_SET_MAX_FRAME_LENGTH"))
-+ return -EIO;
-+
-+ return 0;
-+}
-+
- static int eth_open(struct net_device *dev)
- {
- struct port *port = netdev_priv(dev);
-@@ -1112,6 +1138,8 @@ static int eth_open(struct net_device *d
- if (npe_send_recv_message(port->npe, &msg, "ETH_SET_FIREWALL_MODE"))
- return -EIO;
-
-+ eth_do_change_mtu(dev, dev->mtu);
-+
- if ((err = request_queues(port)) != 0)
- return err;
-
-@@ -1251,7 +1279,26 @@ static int eth_close(struct net_device *
- return 0;
- }
-
-+static int ixp_eth_change_mtu(struct net_device *dev, int mtu)
-+{
-+ int ret;
-+
-+ if (mtu > MAX_MRU)
-+ return -EINVAL;
-+
-+ if (dev->flags & IFF_UP) {
-+ ret = eth_do_change_mtu(dev, mtu);
-+ if (ret < 0)
-+ return ret;
-+ }
-+
-+ dev->mtu = mtu;
-+
-+ return 0;
-+}
-+
- static const struct net_device_ops ixp4xx_netdev_ops = {
-+ .ndo_change_mtu = ixp_eth_change_mtu,
- .ndo_open = eth_open,
- .ndo_stop = eth_close,
- .ndo_start_xmit = eth_xmit,
diff --git a/target/linux/ixp4xx/patches-2.6.33/310-gtwx5717_spi_bus.patch b/target/linux/ixp4xx/patches-2.6.33/310-gtwx5717_spi_bus.patch
deleted file mode 100644
index 164e03e77..000000000
--- a/target/linux/ixp4xx/patches-2.6.33/310-gtwx5717_spi_bus.patch
+++ /dev/null
@@ -1,52 +0,0 @@
---- a/arch/arm/mach-ixp4xx/gtwx5715-setup.c
-+++ b/arch/arm/mach-ixp4xx/gtwx5715-setup.c
-@@ -28,6 +28,7 @@
- #include <linux/tty.h>
- #include <linux/serial_8250.h>
- #include <linux/slab.h>
-+#include <linux/spi/spi_gpio_old.h>
- #include <asm/types.h>
- #include <asm/setup.h>
- #include <asm/memory.h>
-@@ -147,9 +148,41 @@ static struct platform_device gtwx5715_f
- .resource = &gtwx5715_flash_resource,
- };
-
-+static int gtwx5715_spi_boardinfo_setup(struct spi_board_info *bi,
-+ struct spi_master *master, void *data)
-+{
-+
-+ strlcpy(bi->modalias, "spi-ks8995", sizeof(bi->modalias));
-+
-+ bi->max_speed_hz = 5000000 /* Hz */;
-+ bi->bus_num = master->bus_num;
-+ bi->mode = SPI_MODE_0;
-+
-+ return 0;
-+}
-+
-+static struct spi_gpio_platform_data gtwx5715_spi_bus_data = {
-+ .pin_cs = GTWX5715_KSSPI_SELECT,
-+ .pin_clk = GTWX5715_KSSPI_CLOCK,
-+ .pin_miso = GTWX5715_KSSPI_RXD,
-+ .pin_mosi = GTWX5715_KSSPI_TXD,
-+ .cs_activelow = 1,
-+ .no_spi_delay = 1,
-+ .boardinfo_setup = gtwx5715_spi_boardinfo_setup,
-+};
-+
-+static struct platform_device gtwx5715_spi_bus = {
-+ .name = "spi-gpio",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = &gtwx5715_spi_bus_data,
-+ },
-+};
-+
- static struct platform_device *gtwx5715_devices[] __initdata = {
- &gtwx5715_uart_device,
- &gtwx5715_flash,
-+ &gtwx5715_spi_bus,
- };
-
- static void __init gtwx5715_init(void)
diff --git a/target/linux/ixp4xx/patches-2.6.33/311-gtwx5717_mac_plat_info.patch b/target/linux/ixp4xx/patches-2.6.33/311-gtwx5717_mac_plat_info.patch
deleted file mode 100644
index 8ce79e4d0..000000000
--- a/target/linux/ixp4xx/patches-2.6.33/311-gtwx5717_mac_plat_info.patch
+++ /dev/null
@@ -1,40 +0,0 @@
---- a/arch/arm/mach-ixp4xx/gtwx5715-setup.c
-+++ b/arch/arm/mach-ixp4xx/gtwx5715-setup.c
-@@ -179,10 +179,37 @@ static struct platform_device gtwx5715_s
- },
- };
-
-+static struct eth_plat_info gtwx5715_npeb_data = {
-+ .phy = IXP4XX_ETH_PHY_MAX_ADDR,
-+ .phy_mask = 0x1e, /* ports 1-4 of the KS8995 switch */
-+ .rxq = 3,
-+ .txreadyq = 20,
-+};
-+
-+static struct eth_plat_info gtwx5715_npec_data = {
-+ .phy = 5, /* port 5 of the KS8995 switch */
-+ .rxq = 4,
-+ .txreadyq = 21,
-+};
-+
-+static struct platform_device gtwx5715_npeb_device = {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEB,
-+ .dev.platform_data = &gtwx5715_npeb_data,
-+};
-+
-+static struct platform_device gtwx5715_npec_device = {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEC,
-+ .dev.platform_data = &gtwx5715_npec_data,
-+};
-+
- static struct platform_device *gtwx5715_devices[] __initdata = {
- &gtwx5715_uart_device,
- &gtwx5715_flash,
- &gtwx5715_spi_bus,
-+ &gtwx5715_npeb_device,
-+ &gtwx5715_npec_device,
- };
-
- static void __init gtwx5715_init(void)
diff --git a/target/linux/ixp4xx/patches-2.6.33/312-ixp4xx_pata_optimization.patch b/target/linux/ixp4xx/patches-2.6.33/312-ixp4xx_pata_optimization.patch
deleted file mode 100644
index 3bf1b7497..000000000
--- a/target/linux/ixp4xx/patches-2.6.33/312-ixp4xx_pata_optimization.patch
+++ /dev/null
@@ -1,137 +0,0 @@
---- a/drivers/ata/pata_ixp4xx_cf.c
-+++ b/drivers/ata/pata_ixp4xx_cf.c
-@@ -24,16 +24,58 @@
- #include <scsi/scsi_host.h>
-
- #define DRV_NAME "pata_ixp4xx_cf"
--#define DRV_VERSION "0.2"
-+#define DRV_VERSION "0.3"
-
- static int ixp4xx_set_mode(struct ata_link *link, struct ata_device **error)
- {
- struct ata_device *dev;
-+ struct ixp4xx_pata_data *data = link->ap->host->dev->platform_data;
-+ unsigned int pio_mask;
-
- ata_for_each_dev(dev, link, ENABLED) {
-- ata_dev_printk(dev, KERN_INFO, "configured for PIO0\n");
-- dev->pio_mode = XFER_PIO_0;
-- dev->xfer_mode = XFER_PIO_0;
-+ if (dev->id[ATA_ID_FIELD_VALID] & (1 << 1)) {
-+ pio_mask = dev->id[ATA_ID_PIO_MODES] & 0x03;
-+ if (pio_mask & (1 << 1)) {
-+ pio_mask = 4;
-+ } else {
-+ pio_mask = 3;
-+ }
-+ } else {
-+ pio_mask = (dev->id[ATA_ID_OLD_PIO_MODES] >> 8);
-+ }
-+
-+ switch (pio_mask){
-+ case 0:
-+ ata_dev_printk(dev, KERN_INFO, "configured for PIO0\n");
-+ dev->pio_mode = XFER_PIO_0;
-+ dev->xfer_mode = XFER_PIO_0;
-+ *data->cs0_cfg = 0x8a473c03;
-+ break;
-+ case 1:
-+ ata_dev_printk(dev, KERN_INFO, "configured for PIO1\n");
-+ dev->pio_mode = XFER_PIO_1;
-+ dev->xfer_mode = XFER_PIO_1;
-+ *data->cs0_cfg = 0x86433c03;
-+ break;
-+ case 2:
-+ ata_dev_printk(dev, KERN_INFO, "configured for PIO2\n");
-+ dev->pio_mode = XFER_PIO_2;
-+ dev->xfer_mode = XFER_PIO_2;
-+ *data->cs0_cfg = 0x82413c03;
-+ break;
-+ case 3:
-+ ata_dev_printk(dev, KERN_INFO, "configured for PIO3\n");
-+ dev->pio_mode = XFER_PIO_3;
-+ dev->xfer_mode = XFER_PIO_3;
-+ *data->cs0_cfg = 0x80823c03;
-+ break;
-+ case 4:
-+ ata_dev_printk(dev, KERN_INFO, "configured for PIO4\n");
-+ dev->pio_mode = XFER_PIO_4;
-+ dev->xfer_mode = XFER_PIO_4;
-+ *data->cs0_cfg = 0x80403c03;
-+ break;
-+ }
- dev->xfer_shift = ATA_SHIFT_PIO;
- dev->flags |= ATA_DFLAG_PIO;
- }
-@@ -46,6 +88,7 @@ static unsigned int ixp4xx_mmio_data_xfe
- unsigned int i;
- unsigned int words = buflen >> 1;
- u16 *buf16 = (u16 *) buf;
-+ unsigned int pio_mask;
- struct ata_port *ap = dev->link->ap;
- void __iomem *mmio = ap->ioaddr.data_addr;
- struct ixp4xx_pata_data *data = ap->host->dev->platform_data;
-@@ -53,8 +96,34 @@ static unsigned int ixp4xx_mmio_data_xfe
- /* set the expansion bus in 16bit mode and restore
- * 8 bit mode after the transaction.
- */
-- *data->cs0_cfg &= ~(0x01);
-- udelay(100);
-+ if (dev->id[ATA_ID_FIELD_VALID] & (1 << 1)){
-+ pio_mask = dev->id[ATA_ID_PIO_MODES] & 0x03;
-+ if (pio_mask & (1 << 1)){
-+ pio_mask = 4;
-+ }else{
-+ pio_mask = 3;
-+ }
-+ }else{
-+ pio_mask = (dev->id[ATA_ID_OLD_PIO_MODES] >> 8);
-+ }
-+ switch (pio_mask){
-+ case 0:
-+ *data->cs0_cfg = 0xa9643c42;
-+ break;
-+ case 1:
-+ *data->cs0_cfg = 0x85033c42;
-+ break;
-+ case 2:
-+ *data->cs0_cfg = 0x80b23c42;
-+ break;
-+ case 3:
-+ *data->cs0_cfg = 0x80823c42;
-+ break;
-+ case 4:
-+ *data->cs0_cfg = 0x80403c42;
-+ break;
-+ }
-+ udelay(5);
-
- /* Transfer multiple of 2 bytes */
- if (rw == READ)
-@@ -79,8 +148,24 @@ static unsigned int ixp4xx_mmio_data_xfe
- words++;
- }
-
-- udelay(100);
-- *data->cs0_cfg |= 0x01;
-+ udelay(5);
-+ switch (pio_mask){
-+ case 0:
-+ *data->cs0_cfg = 0x8a473c03;
-+ break;
-+ case 1:
-+ *data->cs0_cfg = 0x86433c03;
-+ break;
-+ case 2:
-+ *data->cs0_cfg = 0x82413c03;
-+ break;
-+ case 3:
-+ *data->cs0_cfg = 0x80823c03;
-+ break;
-+ case 4:
-+ *data->cs0_cfg = 0x80403c03;
-+ break;
-+ }
-
- return words << 1;
- }
diff --git a/target/linux/ixp4xx/patches-2.6.33/402-ixp4xx_gpiolib.patch b/target/linux/ixp4xx/patches-2.6.33/402-ixp4xx_gpiolib.patch
deleted file mode 100644
index 0d5a25378..000000000
--- a/target/linux/ixp4xx/patches-2.6.33/402-ixp4xx_gpiolib.patch
+++ /dev/null
@@ -1,125 +0,0 @@
---- a/arch/arm/mach-ixp4xx/common.c
-+++ b/arch/arm/mach-ixp4xx/common.c
-@@ -36,6 +36,7 @@
- #include <asm/pgtable.h>
- #include <asm/page.h>
- #include <asm/irq.h>
-+#include <asm/gpio.h>
-
- #include <asm/mach/map.h>
- #include <asm/mach/irq.h>
-@@ -375,12 +376,39 @@ static struct platform_device *ixp46x_de
- unsigned long ixp4xx_exp_bus_size;
- EXPORT_SYMBOL(ixp4xx_exp_bus_size);
-
-+static int ixp4xx_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
-+{
-+ gpio_line_config(gpio, IXP4XX_GPIO_IN);
-+ return 0;
-+}
-+EXPORT_SYMBOL(ixp4xx_gpio_direction_input);
-+
-+static int ixp4xx_gpio_direction_output(struct gpio_chip *chip, unsigned gpio, int level)
-+{
-+ gpio_line_set(gpio, level);
-+ gpio_line_config(gpio, IXP4XX_GPIO_OUT);
-+ return 0;
-+}
-+EXPORT_SYMBOL(ixp4xx_gpio_direction_output);
-+
-+static struct gpio_chip ixp4xx_gpio_chip = {
-+ .label = "IXP4XX_GPIO_CHIP",
-+ .direction_input = ixp4xx_gpio_direction_input,
-+ .direction_output = ixp4xx_gpio_direction_output,
-+ .get = gpio_get_value,
-+ .set = gpio_set_value,
-+ .base = 0,
-+ .ngpio = 16,
-+};
-+
- void __init ixp4xx_sys_init(void)
- {
- ixp4xx_exp_bus_size = SZ_16M;
-
- platform_add_devices(ixp4xx_devices, ARRAY_SIZE(ixp4xx_devices));
-
-+ gpiochip_add(&ixp4xx_gpio_chip);
-+
- if (cpu_is_ixp46x()) {
- int region;
-
---- a/arch/arm/Kconfig
-+++ b/arch/arm/Kconfig
-@@ -417,6 +417,7 @@ config ARCH_IXP4XX
- select GENERIC_GPIO
- select GENERIC_TIME
- select GENERIC_CLOCKEVENTS
-+ select ARCH_REQUIRE_GPIOLIB
- help
- Support for Intel's IXP4XX (XScale) family of processors.
-
---- a/arch/arm/mach-ixp4xx/include/mach/gpio.h
-+++ b/arch/arm/mach-ixp4xx/include/mach/gpio.h
-@@ -27,47 +27,31 @@
-
- #include <linux/kernel.h>
- #include <mach/hardware.h>
-+#include <asm-generic/gpio.h> /* cansleep wrappers */
-
--static inline int gpio_request(unsigned gpio, const char *label)
--{
-- return 0;
--}
--
--static inline void gpio_free(unsigned gpio)
--{
-- might_sleep();
--
-- return;
--}
--
--static inline int gpio_direction_input(unsigned gpio)
--{
-- gpio_line_config(gpio, IXP4XX_GPIO_IN);
-- return 0;
--}
--
--static inline int gpio_direction_output(unsigned gpio, int level)
--{
-- gpio_line_set(gpio, level);
-- gpio_line_config(gpio, IXP4XX_GPIO_OUT);
-- return 0;
--}
-+#define NR_BUILTIN_GPIO 16
-
- static inline int gpio_get_value(unsigned gpio)
- {
-- int value;
--
-- gpio_line_get(gpio, &value);
--
-- return value;
-+ if (gpio < NR_BUILTIN_GPIO)
-+ {
-+ int value;
-+ gpio_line_get(gpio, &value);
-+ return value;
-+ }
-+ else
-+ return __gpio_get_value(gpio);
- }
-
- static inline void gpio_set_value(unsigned gpio, int value)
- {
-- gpio_line_set(gpio, value);
-+ if (gpio < NR_BUILTIN_GPIO)
-+ gpio_line_set(gpio, value);
-+ else
-+ __gpio_set_value(gpio, value);
- }
-
--#include <asm-generic/gpio.h> /* cansleep wrappers */
-+#define gpio_cansleep __gpio_cansleep
-
- extern int gpio_to_irq(int gpio);
- extern int irq_to_gpio(unsigned int irq);
diff --git a/target/linux/ixp4xx/patches-2.6.33/500-usr8200_support.patch b/target/linux/ixp4xx/patches-2.6.33/500-usr8200_support.patch
deleted file mode 100644
index 2d78425f4..000000000
--- a/target/linux/ixp4xx/patches-2.6.33/500-usr8200_support.patch
+++ /dev/null
@@ -1,342 +0,0 @@
---- a/arch/arm/mach-ixp4xx/Kconfig
-+++ b/arch/arm/mach-ixp4xx/Kconfig
-@@ -97,6 +97,14 @@ config MACH_SIDEWINDER
- Engineering Sidewinder board. For more information on this
- platform, see http://www.adiengineering.com
-
-+config MACH_USR8200
-+ bool "USRobotics USR8200"
-+ select PCI
-+ help
-+ Say 'Y' here if you want your kernel to support the USRobotics
-+ USR8200 router board. For more information on this platform, see
-+ http://openwrt.org
-+
- config MACH_COMPEX
- bool "Compex WP18 / NP18A"
- select PCI
---- a/arch/arm/mach-ixp4xx/Makefile
-+++ b/arch/arm/mach-ixp4xx/Makefile
-@@ -25,6 +25,7 @@ obj-pci-$(CONFIG_MACH_WRT300NV2) += wrt
- obj-pci-$(CONFIG_MACH_AP1000) += ixdp425-pci.o
- obj-pci-$(CONFIG_MACH_TW5334) += tw5334-pci.o
- obj-pci-$(CONFIG_MACH_MI424WR) += mi424wr-pci.o
-+obj-pci-$(CONFIG_MACH_USR8200) += usr8200-pci.o
-
- obj-y += common.o
-
-@@ -49,6 +50,7 @@ obj-$(CONFIG_MACH_WRT300NV2) += wrt300nv
- obj-$(CONFIG_MACH_AP1000) += ap1000-setup.o
- obj-$(CONFIG_MACH_TW5334) += tw5334-setup.o
- obj-$(CONFIG_MACH_MI424WR) += mi424wr-setup.o
-+obj-$(CONFIG_MACH_USR8200) += usr8200-setup.o
-
- obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o
- obj-$(CONFIG_IXP4XX_QMGR) += ixp4xx_qmgr.o
---- /dev/null
-+++ b/arch/arm/mach-ixp4xx/usr8200-pci.c
-@@ -0,0 +1,78 @@
-+/*
-+ * arch/arch/mach-ixp4xx/usr8200-pci.c
-+ *
-+ * PCI setup routines for USRobotics USR8200
-+ *
-+ * Copyright (C) 2008 Peter Denison <openwrt@marshadder.org>
-+ *
-+ * based on pronghorn-pci.c
-+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-+ * based on coyote-pci.c:
-+ * Copyright (C) 2002 Jungo Software Technologies.
-+ * Copyright (C) 2003 MontaVista Softwrae, Inc.
-+ *
-+ * Maintainer: Peter Denison <openwrt@marshadder.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/pci.h>
-+#include <linux/init.h>
-+#include <linux/irq.h>
-+
-+#include <asm/mach-types.h>
-+#include <mach/hardware.h>
-+
-+#include <asm/mach/pci.h>
-+
-+void __init usr8200_pci_preinit(void)
-+{
-+ set_irq_type(IRQ_IXP4XX_GPIO7, IRQ_TYPE_LEVEL_LOW);
-+ set_irq_type(IRQ_IXP4XX_GPIO8, IRQ_TYPE_LEVEL_LOW);
-+ set_irq_type(IRQ_IXP4XX_GPIO9, IRQ_TYPE_LEVEL_LOW);
-+ set_irq_type(IRQ_IXP4XX_GPIO10, IRQ_TYPE_LEVEL_LOW);
-+ set_irq_type(IRQ_IXP4XX_GPIO11, IRQ_TYPE_LEVEL_LOW);
-+
-+ ixp4xx_pci_preinit();
-+}
-+
-+static int __init usr8200_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+ if (slot == 14)
-+ return IRQ_IXP4XX_GPIO7;
-+ else if (slot == 15)
-+ return IRQ_IXP4XX_GPIO8;
-+ else if (slot == 16) {
-+ if (pin == 1)
-+ return IRQ_IXP4XX_GPIO11;
-+ else if (pin == 2)
-+ return IRQ_IXP4XX_GPIO10;
-+ else if (pin == 3)
-+ return IRQ_IXP4XX_GPIO9;
-+ else
-+ return -1;
-+ } else
-+ return -1;
-+}
-+
-+struct hw_pci usr8200_pci __initdata = {
-+ .nr_controllers = 1,
-+ .preinit = usr8200_pci_preinit,
-+ .swizzle = pci_std_swizzle,
-+ .setup = ixp4xx_setup,
-+ .scan = ixp4xx_scan_bus,
-+ .map_irq = usr8200_map_irq,
-+};
-+
-+int __init usr8200_pci_init(void)
-+{
-+ if (machine_is_usr8200())
-+ pci_common_init(&usr8200_pci);
-+ return 0;
-+}
-+
-+subsys_initcall(usr8200_pci_init);
---- /dev/null
-+++ b/arch/arm/mach-ixp4xx/usr8200-setup.c
-@@ -0,0 +1,212 @@
-+/*
-+ * arch/arm/mach-ixp4xx/usr8200-setup.c
-+ *
-+ * Board setup for the USRobotics USR8200
-+ *
-+ * Copyright (C) 2008 Peter Denison <openwrt@marshadder.org>
-+ *
-+ * based on pronghorn-setup.c:
-+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-+ * based on coyote-setup.c:
-+ * Copyright (C) 2003-2005 MontaVista Software, Inc.
-+ *
-+ * Author: Peter Denison <openwrt@marshadder.org>
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/device.h>
-+#include <linux/serial.h>
-+#include <linux/tty.h>
-+#include <linux/serial_8250.h>
-+#include <linux/slab.h>
-+#include <linux/types.h>
-+#include <linux/memory.h>
-+#include <linux/i2c-gpio.h>
-+#include <linux/leds.h>
-+
-+#include <asm/setup.h>
-+#include <mach/hardware.h>
-+#include <asm/irq.h>
-+#include <asm/mach-types.h>
-+#include <asm/mach/arch.h>
-+#include <asm/mach/flash.h>
-+
-+static struct flash_platform_data usr8200_flash_data = {
-+ .map_name = "cfi_probe",
-+ .width = 2,
-+};
-+
-+static struct resource usr8200_flash_resource = {
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct platform_device usr8200_flash = {
-+ .name = "IXP4XX-Flash",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = &usr8200_flash_data,
-+ },
-+ .num_resources = 1,
-+ .resource = &usr8200_flash_resource,
-+};
-+
-+static struct resource usr8200_uart_resources [] = {
-+ {
-+ .start = IXP4XX_UART2_BASE_PHYS,
-+ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM
-+ },
-+ {
-+ .start = IXP4XX_UART1_BASE_PHYS,
-+ .end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM
-+ }
-+};
-+
-+static struct plat_serial8250_port usr8200_uart_data[] = {
-+ {
-+ .mapbase = IXP4XX_UART2_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART2,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ {
-+ .mapbase = IXP4XX_UART1_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART1,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ { },
-+};
-+
-+static struct platform_device usr8200_uart = {
-+ .name = "serial8250",
-+ .id = PLAT8250_DEV_PLATFORM,
-+ .dev = {
-+ .platform_data = usr8200_uart_data,
-+ },
-+ .num_resources = 2,
-+ .resource = usr8200_uart_resources,
-+};
-+
-+static struct gpio_led usr8200_led_pin[] = {
-+ {
-+ .name = "usr8200:usb1",
-+ .gpio = 0,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "usr8200:usb2",
-+ .gpio = 1,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "usr8200:ieee1394",
-+ .gpio = 2,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "usr8200:internal",
-+ .gpio = 3,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "usr8200:power",
-+ .gpio = 14,
-+ }
-+};
-+
-+static struct gpio_led_platform_data usr8200_led_data = {
-+ .num_leds = ARRAY_SIZE(usr8200_led_pin),
-+ .leds = usr8200_led_pin,
-+};
-+
-+static struct platform_device usr8200_led = {
-+ .name = "leds-gpio",
-+ .id = -1,
-+ .dev.platform_data = &usr8200_led_data,
-+};
-+
-+static struct eth_plat_info usr8200_plat_eth[] = {
-+ { /* NPEC - LAN with Marvell 88E6060 switch */
-+ .phy = IXP4XX_ETH_PHY_MAX_ADDR,
-+ .phy_mask = 0x0F0000,
-+ .rxq = 4,
-+ .txreadyq = 21,
-+ }, { /* NPEB - WAN */
-+ .phy = 9,
-+ .rxq = 3,
-+ .txreadyq = 20,
-+ }
-+};
-+
-+static struct platform_device usr8200_eth[] = {
-+ {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEC,
-+ .dev.platform_data = usr8200_plat_eth,
-+ }, {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEB,
-+ .dev.platform_data = usr8200_plat_eth + 1,
-+ }
-+};
-+
-+static struct resource usr8200_rtc_resources = {
-+ .flags = IORESOURCE_MEM
-+};
-+
-+static struct platform_device usr8200_rtc = {
-+ .name = "rtc7301",
-+ .id = 0,
-+ .num_resources = 1,
-+ .resource = &usr8200_rtc_resources,
-+};
-+
-+static struct platform_device *usr8200_devices[] __initdata = {
-+ &usr8200_flash,
-+ &usr8200_uart,
-+ &usr8200_led,
-+ &usr8200_eth[0],
-+ &usr8200_eth[1],
-+ &usr8200_rtc,
-+};
-+
-+static void __init usr8200_init(void)
-+{
-+ ixp4xx_sys_init();
-+
-+ usr8200_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-+ usr8200_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_16M - 1;
-+
-+ usr8200_rtc_resources.start = IXP4XX_EXP_BUS_BASE(2);
-+ usr8200_rtc_resources.end = IXP4XX_EXP_BUS_BASE(2) + 0x01ff;
-+
-+ *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
-+ *IXP4XX_EXP_CS2 = 0x3fff000 | IXP4XX_EXP_BUS_SIZE(0) | IXP4XX_EXP_BUS_WR_EN |
-+ IXP4XX_EXP_BUS_CS_EN | IXP4XX_EXP_BUS_BYTE_EN;
-+ *IXP4XX_GPIO_GPCLKR = 0x01100000;
-+
-+ /* configure button as input */
-+ gpio_line_config(12, IXP4XX_GPIO_IN);
-+
-+ platform_add_devices(usr8200_devices, ARRAY_SIZE(usr8200_devices));
-+}
-+
-+MACHINE_START(USR8200, "USRobotics USR8200")
-+ /* Maintainer: Peter Denison <openwrt@marshadder.org> */
-+ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
-+ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
-+ .map_io = ixp4xx_map_io,
-+ .init_irq = ixp4xx_init_irq,
-+ .timer = &ixp4xx_timer,
-+ .boot_params = 0x0100,
-+ .init_machine = usr8200_init,
-+MACHINE_END
---- a/arch/arm/mach-ixp4xx/include/mach/uncompress.h
-+++ b/arch/arm/mach-ixp4xx/include/mach/uncompress.h
-@@ -43,7 +43,7 @@ static __inline__ void __arch_decomp_set
- if (machine_is_adi_coyote() || machine_is_gtwx5715() ||
- machine_is_gateway7001() || machine_is_wg302v2() ||
- machine_is_pronghorn() || machine_is_pronghorn_metro() || machine_is_wrt300nv2() ||
-- machine_is_tw5334())
-+ machine_is_tw5334() || machine_is_usr8200())
- uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS;
- else
- uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;
diff --git a/target/linux/ixp4xx/patches-2.6.33/520-tw2662_support.patch b/target/linux/ixp4xx/patches-2.6.33/520-tw2662_support.patch
deleted file mode 100644
index cc796c504..000000000
--- a/target/linux/ixp4xx/patches-2.6.33/520-tw2662_support.patch
+++ /dev/null
@@ -1,329 +0,0 @@
---- a/arch/arm/mach-ixp4xx/Kconfig
-+++ b/arch/arm/mach-ixp4xx/Kconfig
-@@ -180,6 +180,15 @@ config ARCH_PRPMC1100
- PrPCM1100 Processor Mezanine Module. For more information on
- this platform, see <file:Documentation/arm/IXP4xx>.
-
-+config MACH_TW2662
-+ bool "Titan Wireless TW-266-2"
-+ select PCI
-+ help
-+ Say 'Y' here if you want your kernel to support the Titan
-+ Wireless TW266-2. For more information on this platform,
-+ see http://openwrt.org
-+
-+
- config MACH_TW5334
- bool "Titan Wireless TW-533-4"
- select PCI
---- a/arch/arm/mach-ixp4xx/Makefile
-+++ b/arch/arm/mach-ixp4xx/Makefile
-@@ -23,6 +23,7 @@ obj-pci-$(CONFIG_MACH_SIDEWINDER) += sid
- obj-pci-$(CONFIG_MACH_COMPEX) += ixdp425-pci.o
- obj-pci-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-pci.o
- obj-pci-$(CONFIG_MACH_AP1000) += ixdp425-pci.o
-+obj-pci-$(CONFIG_MACH_TW2662) += tw2662-pci.o
- obj-pci-$(CONFIG_MACH_TW5334) += tw5334-pci.o
- obj-pci-$(CONFIG_MACH_MI424WR) += mi424wr-pci.o
- obj-pci-$(CONFIG_MACH_USR8200) += usr8200-pci.o
-@@ -48,6 +49,7 @@ obj-$(CONFIG_MACH_SIDEWINDER) += sidewin
- obj-$(CONFIG_MACH_COMPEX) += compex-setup.o
- obj-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-setup.o
- obj-$(CONFIG_MACH_AP1000) += ap1000-setup.o
-+obj-$(CONFIG_MACH_TW2662) += tw2662-setup.o
- obj-$(CONFIG_MACH_TW5334) += tw5334-setup.o
- obj-$(CONFIG_MACH_MI424WR) += mi424wr-setup.o
- obj-$(CONFIG_MACH_USR8200) += usr8200-setup.o
---- a/arch/arm/mach-ixp4xx/include/mach/uncompress.h
-+++ b/arch/arm/mach-ixp4xx/include/mach/uncompress.h
-@@ -43,7 +43,7 @@ static __inline__ void __arch_decomp_set
- if (machine_is_adi_coyote() || machine_is_gtwx5715() ||
- machine_is_gateway7001() || machine_is_wg302v2() ||
- machine_is_pronghorn() || machine_is_pronghorn_metro() || machine_is_wrt300nv2() ||
-- machine_is_tw5334() || machine_is_usr8200())
-+ machine_is_tw5334() || machine_is_usr8200() || machine_is_tw2662())
- uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS;
- else
- uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;
---- /dev/null
-+++ b/arch/arm/mach-ixp4xx/tw2662-pci.c
-@@ -0,0 +1,68 @@
-+/*
-+ * arch/arm/mach-ixp4xx/tw2662-pci.c
-+ *
-+ * PCI setup routines for Tiran Wireless TW-266-2 platform
-+ *
-+ * Copyright (C) 2002 Jungo Software Technologies.
-+ * Copyright (C) 2003 MontaVista Softwrae, Inc.
-+ * Copyright (C) 2010 Alexandros C. Couloumbis <alex@ozo.com>
-+ * Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org>
-+ *
-+ * Maintainer: Deepak Saxena <dsaxena@mvista.com>
-+ * Maintainer: Alexandros C. Couloumbis <alex@ozo.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/pci.h>
-+#include <linux/init.h>
-+#include <linux/irq.h>
-+#include <asm/mach-types.h>
-+#include <mach/hardware.h>
-+#include <asm/irq.h>
-+#include <asm/mach/pci.h>
-+
-+#define SLOT0_DEVID 1
-+#define SLOT1_DEVID 3
-+
-+/* PCI controller GPIO to IRQ pin mappings */
-+#define SLOT0_INTA 11
-+#define SLOT1_INTA 9
-+
-+void __init tw2662_pci_preinit(void)
-+{
-+ set_irq_type(IXP4XX_GPIO_IRQ(SLOT0_INTA), IRQ_TYPE_LEVEL_LOW);
-+ set_irq_type(IXP4XX_GPIO_IRQ(SLOT1_INTA), IRQ_TYPE_LEVEL_LOW);
-+ ixp4xx_pci_preinit();
-+}
-+
-+static int __init tw2662_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+ if (slot == SLOT0_DEVID)
-+ return IXP4XX_GPIO_IRQ(SLOT0_INTA);
-+ else if (slot == SLOT1_DEVID)
-+ return IXP4XX_GPIO_IRQ(SLOT1_INTA);
-+ else return -1;
-+}
-+
-+struct hw_pci tw2662_pci __initdata = {
-+ .nr_controllers = 1,
-+ .preinit = tw2662_pci_preinit,
-+ .swizzle = pci_std_swizzle,
-+ .setup = ixp4xx_setup,
-+ .scan = ixp4xx_scan_bus,
-+ .map_irq = tw2662_map_irq,
-+};
-+
-+int __init tw2662_pci_init(void)
-+{
-+ if (machine_is_tw2662())
-+ pci_common_init(&tw2662_pci);
-+ return 0;
-+}
-+
-+subsys_initcall(tw2662_pci_init);
---- /dev/null
-+++ b/arch/arm/mach-ixp4xx/tw2662-setup.c
-@@ -0,0 +1,208 @@
-+/*
-+ * arch/arm/mach-ixp4xx/tw2662-setup.c
-+ *
-+ * Titan Wireless TW-266-2
-+ *
-+ * Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org>
-+ * Copyright (C) 2010 Alexandros C. Couloumbis <alex@ozo.com>
-+ *
-+ * based on ap1000-setup.c:
-+ * Author: Imre Kaloz <Kaloz@openwrt.org>
-+ */
-+
-+#include <linux/if_ether.h>
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/device.h>
-+#include <linux/serial.h>
-+#include <linux/tty.h>
-+#include <linux/serial_8250.h>
-+#include <linux/slab.h>
-+#include <linux/netdevice.h>
-+#include <linux/etherdevice.h>
-+#include <linux/platform_device.h>
-+
-+#include <asm/io.h>
-+#include <asm/types.h>
-+#include <asm/setup.h>
-+#include <asm/memory.h>
-+#include <mach/hardware.h>
-+#include <asm/mach-types.h>
-+#include <asm/irq.h>
-+#include <asm/mach/arch.h>
-+#include <asm/mach/flash.h>
-+
-+/* gpio mask used by platform device */
-+#define TW2662_GPIO_MASK (1 << 1) | (1 << 3) | (1 << 5) | (1 << 7)
-+
-+static struct flash_platform_data tw2662_flash_data = {
-+ .map_name = "cfi_probe",
-+ .width = 2,
-+};
-+
-+static struct resource tw2662_flash_resource = {
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct platform_device tw2662_flash = {
-+ .name = "IXP4XX-Flash",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = &tw2662_flash_data,
-+ },
-+ .num_resources = 1,
-+ .resource = &tw2662_flash_resource,
-+};
-+
-+static struct resource tw2662_gpio_resources[] = {
-+ {
-+ .name = "gpio",
-+ /* FIXME: gpio mask should be model specific */
-+ .start = TW2662_GPIO_MASK,
-+ .end = TW2662_GPIO_MASK,
-+ .flags = 0,
-+ },
-+};
-+
-+static struct platform_device tw2662_gpio = {
-+ .name = "GPIODEV",
-+ .id = -1,
-+ .num_resources = ARRAY_SIZE(tw2662_gpio_resources),
-+ .resource = tw2662_gpio_resources,
-+};
-+
-+static struct resource tw2662_uart_resources[] = {
-+ {
-+ .start = IXP4XX_UART1_BASE_PHYS,
-+ .end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM
-+ },
-+ {
-+ .start = IXP4XX_UART2_BASE_PHYS,
-+ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM
-+ }
-+};
-+
-+static struct plat_serial8250_port tw2662_uart_data[] = {
-+ {
-+ .mapbase = IXP4XX_UART1_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART1,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ {
-+ .mapbase = IXP4XX_UART2_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART2,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ { },
-+};
-+
-+static struct platform_device tw2662_uart = {
-+ .name = "serial8250",
-+ .id = PLAT8250_DEV_PLATFORM,
-+ .dev.platform_data = tw2662_uart_data,
-+ .num_resources = 2,
-+ .resource = tw2662_uart_resources
-+};
-+
-+/* Built-in 10/100 Ethernet MAC interfaces */
-+static struct eth_plat_info tw2662_plat_eth[] = {
-+ {
-+ .phy = 3,
-+ .rxq = 3,
-+ .txreadyq = 20,
-+ }, {
-+ .phy = 1,
-+ .rxq = 4,
-+ .txreadyq = 21,
-+ }
-+};
-+
-+static struct platform_device tw2662_eth[] = {
-+ {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEB,
-+ .dev.platform_data = tw2662_plat_eth,
-+ }, {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEC,
-+ .dev.platform_data = tw2662_plat_eth + 1,
-+ }
-+};
-+
-+
-+static struct platform_device *tw2662_devices[] __initdata = {
-+ &tw2662_flash,
-+ &tw2662_uart,
-+ &tw2662_gpio,
-+ &tw2662_eth[0],
-+ &tw2662_eth[1],
-+};
-+
-+static char tw2662_mem_fixup[] __initdata = "mem=64M ";
-+
-+static void __init tw2662_fixup(struct machine_desc *desc,
-+ struct tag *tags, char **cmdline, struct meminfo *mi)
-+
-+{
-+ struct tag *t = tags;
-+ char *p = *cmdline;
-+
-+ /* Find the end of the tags table, taking note of any cmdline tag. */
-+ for (; t->hdr.size; t = tag_next(t)) {
-+ if (t->hdr.tag == ATAG_CMDLINE) {
-+ p = t->u.cmdline.cmdline;
-+ }
-+ }
-+
-+ /* Overwrite the end of the table with a new cmdline tag. */
-+ t->hdr.tag = ATAG_CMDLINE;
-+ t->hdr.size = (sizeof (struct tag_header) +
-+ strlen(tw2662_mem_fixup) + strlen(p) + 1 + 4) >> 2;
-+ strlcpy(t->u.cmdline.cmdline, tw2662_mem_fixup, COMMAND_LINE_SIZE);
-+ strlcpy(t->u.cmdline.cmdline + strlen(tw2662_mem_fixup), p,
-+ COMMAND_LINE_SIZE - strlen(tw2662_mem_fixup));
-+
-+ /* Terminate the table. */
-+ t = tag_next(t);
-+ t->hdr.tag = ATAG_NONE;
-+ t->hdr.size = 0;
-+}
-+
-+static void __init tw2662_init(void)
-+{
-+ ixp4xx_sys_init();
-+
-+ tw2662_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-+ tw2662_flash_resource.end =
-+ IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
-+
-+ platform_add_devices(tw2662_devices, ARRAY_SIZE(tw2662_devices));
-+ /* hack MACs as most of these boards have a broken eeprom */
-+ random_ether_addr(tw2662_plat_eth[0].hwaddr);
-+ random_ether_addr(tw2662_plat_eth[1].hwaddr);
-+
-+}
-+
-+#ifdef CONFIG_MACH_TW2662
-+MACHINE_START(TW2662, "Titan Wireless TW-266-2")
-+ /* Maintainer: Alexandros C. Couloumbis <alex@ozo.com> */
-+ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
-+ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
-+ .fixup = tw2662_fixup,
-+ .map_io = ixp4xx_map_io,
-+ .init_irq = ixp4xx_init_irq,
-+ .timer = &ixp4xx_timer,
-+ .boot_params = 0x0100,
-+ .init_machine = tw2662_init,
-+MACHINE_END
-+#endif
diff --git a/target/linux/ixp4xx/patches-2.6.33/600-skb_avoid_dmabounce.patch b/target/linux/ixp4xx/patches-2.6.33/600-skb_avoid_dmabounce.patch
deleted file mode 100644
index 026c717c7..000000000
--- a/target/linux/ixp4xx/patches-2.6.33/600-skb_avoid_dmabounce.patch
+++ /dev/null
@@ -1,13 +0,0 @@
---- a/net/core/skbuff.c
-+++ b/net/core/skbuff.c
-@@ -264,6 +264,10 @@ struct sk_buff *__alloc_skb(unsigned int
- if (!skb)
- goto out;
-
-+#ifdef CONFIG_ARCH_IXP4XX
-+ gfp_mask |= GFP_DMA;
-+#endif
-+
- size = SKB_DATA_ALIGN(size);
- data = kmalloc_node_track_caller(size + sizeof(struct skb_shared_info),
- gfp_mask, node);
diff --git a/target/linux/ixp4xx/patches-2.6.33/601-arm-dma_free_coherent.patch b/target/linux/ixp4xx/patches-2.6.33/601-arm-dma_free_coherent.patch
deleted file mode 100644
index b939705b5..000000000
--- a/target/linux/ixp4xx/patches-2.6.33/601-arm-dma_free_coherent.patch
+++ /dev/null
@@ -1,12 +0,0 @@
---- a/arch/arm/mm/dma-mapping.c
-+++ b/arch/arm/mm/dma-mapping.c
-@@ -384,7 +384,8 @@ EXPORT_SYMBOL(dma_mmap_writecombine);
- */
- void dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, dma_addr_t handle)
- {
-- WARN_ON(irqs_disabled());
-+ if (irqs_disabled()) /* don't want stack dumps for these! */
-+ printk("WARNING: at %s:%d %s()\n", __FILE__, __LINE__, __FUNCTION__);
-
- if (dma_release_from_coherent(dev, get_order(size), cpu_addr))
- return;
diff --git a/target/linux/ixp4xx/patches-2.6.33/603-arm-kluin-array-indexing.patch b/target/linux/ixp4xx/patches-2.6.33/603-arm-kluin-array-indexing.patch
deleted file mode 100644
index aca693a41..000000000
--- a/target/linux/ixp4xx/patches-2.6.33/603-arm-kluin-array-indexing.patch
+++ /dev/null
@@ -1,33 +0,0 @@
---- a/arch/arm/kernel/setup.c
-+++ b/arch/arm/kernel/setup.c
-@@ -322,12 +322,13 @@ static void __init setup_processor(void)
- void cpu_init(void)
- {
- unsigned int cpu = smp_processor_id();
-- struct stack *stk = &stacks[cpu];
-+ struct stack *stk;
-
- if (cpu >= NR_CPUS) {
- printk(KERN_CRIT "CPU%u: bad primary CPU number\n", cpu);
- BUG();
- }
-+ stk = &stacks[cpu];
-
- /*
- * Define the placement constraint for the inline asm directive below.
-@@ -386,13 +387,14 @@ static struct machine_desc * __init setu
-
- static int __init arm_add_memory(unsigned long start, unsigned long size)
- {
-- struct membank *bank = &meminfo.bank[meminfo.nr_banks];
-+ struct membank *bank;
-
- if (meminfo.nr_banks >= NR_BANKS) {
- printk(KERN_CRIT "NR_BANKS too low, "
- "ignoring memory at %#lx\n", start);
- return -EINVAL;
- }
-+ bank = &meminfo.bank[meminfo.nr_banks];
-
- /*
- * Ensure that start/size are aligned to a page boundary.
diff --git a/target/linux/ixp4xx/patches-2.6.33/604-arm-ixp4xx-sched_clock.patch b/target/linux/ixp4xx/patches-2.6.33/604-arm-ixp4xx-sched_clock.patch
deleted file mode 100644
index 150f852f0..000000000
--- a/target/linux/ixp4xx/patches-2.6.33/604-arm-ixp4xx-sched_clock.patch
+++ /dev/null
@@ -1,20 +0,0 @@
---- a/arch/arm/mach-ixp4xx/common.c
-+++ b/arch/arm/mach-ixp4xx/common.c
-@@ -427,6 +427,17 @@ static void __init ixp4xx_clocksource_in
- }
-
- /*
-+ * sched_clock()
-+ */
-+unsigned long long sched_clock(void)
-+{
-+ cycle_t cyc = ixp4xx_get_cycles(NULL);
-+ struct clocksource *cs = &clocksource_ixp4xx;
-+
-+ return clocksource_cyc2ns(cyc, cs->mult, cs->shift);
-+}
-+
-+/*
- * clockevents
- */
- static int ixp4xx_set_next_event(unsigned long evt,
diff --git a/target/linux/ixp4xx/patches-2.6.33/605-arm-rmk-cache-flush-optim.patch b/target/linux/ixp4xx/patches-2.6.33/605-arm-rmk-cache-flush-optim.patch
deleted file mode 100644
index 31e0fb531..000000000
--- a/target/linux/ixp4xx/patches-2.6.33/605-arm-rmk-cache-flush-optim.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/arch/arm/mm/fault-armv.c
-+++ b/arch/arm/mm/fault-armv.c
-@@ -127,8 +127,6 @@ make_coherent(struct address_space *mapp
- flush_dcache_mmap_unlock(mapping);
- if (aliases)
- adjust_pte(vma, addr);
-- else
-- flush_cache_page(vma, addr, pfn);
- }
-
- /*
diff --git a/target/linux/ixp4xx/patches-2.6.35/020-gateworks_i2c_pld.patch b/target/linux/ixp4xx/patches-2.6.35/020-gateworks_i2c_pld.patch
deleted file mode 100644
index 73f0c6cac..000000000
--- a/target/linux/ixp4xx/patches-2.6.35/020-gateworks_i2c_pld.patch
+++ /dev/null
@@ -1,421 +0,0 @@
---- /dev/null
-+++ b/drivers/gpio/gw_i2c_pld.c
-@@ -0,0 +1,371 @@
-+/*
-+ * Gateworks I2C PLD GPIO expander
-+ *
-+ * Copyright (C) 2009 Gateworks Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/slab.h>
-+#include <linux/hardirq.h>
-+#include <linux/i2c.h>
-+#include <linux/i2c/gw_i2c_pld.h>
-+#include <asm/gpio.h>
-+
-+static const struct i2c_device_id gw_i2c_pld_id[] = {
-+ { "gw_i2c_pld", 8 },
-+ { }
-+};
-+MODULE_DEVICE_TABLE(i2c, gw_i2c_pld_id);
-+
-+/*
-+ * The Gateworks I2C PLD chip only expose one read and one
-+ * write register. Writing a "one" bit (to match the reset state) lets
-+ * that pin be used as an input. It is an open-drain model.
-+ */
-+
-+struct gw_i2c_pld {
-+ struct gpio_chip chip;
-+ struct i2c_client *client;
-+ unsigned out; /* software latch */
-+};
-+
-+/*-------------------------------------------------------------------------*/
-+
-+/*
-+ * The Gateworks I2C PLD chip does not properly send the acknowledge bit
-+ * thus we cannot use standard i2c_smbus functions. We have recreated
-+ * our own here, but we still use the mutex_lock to lock the i2c_bus
-+ * as the device still exists on the I2C bus.
-+*/
-+
-+#define PLD_SCL_GPIO 6
-+#define PLD_SDA_GPIO 7
-+
-+#define SCL_LO() gpio_line_set(PLD_SCL_GPIO, IXP4XX_GPIO_LOW)
-+#define SCL_HI() gpio_line_set(PLD_SCL_GPIO, IXP4XX_GPIO_HIGH)
-+#define SCL_EN() gpio_line_config(PLD_SCL_GPIO, IXP4XX_GPIO_OUT)
-+#define SDA_LO() gpio_line_set(PLD_SDA_GPIO, IXP4XX_GPIO_LOW)
-+#define SDA_HI() gpio_line_set(PLD_SDA_GPIO, IXP4XX_GPIO_HIGH)
-+#define SDA_EN() gpio_line_config(PLD_SDA_GPIO, IXP4XX_GPIO_OUT)
-+#define SDA_DIS() gpio_line_config(PLD_SDA_GPIO, IXP4XX_GPIO_IN)
-+#define SDA_IN(x) gpio_line_get(PLD_SDA_GPIO, &x);
-+
-+static int i2c_pld_write_byte(int address, int byte)
-+{
-+ int i;
-+
-+ address = (address << 1) & ~0x1;
-+
-+ SDA_HI();
-+ SDA_EN();
-+ SCL_EN();
-+ SCL_HI();
-+ SDA_LO();
-+ SCL_LO();
-+
-+ for (i = 7; i >= 0; i--)
-+ {
-+ if (address & (1 << i))
-+ SDA_HI();
-+ else
-+ SDA_LO();
-+
-+ SCL_HI();
-+ SCL_LO();
-+ }
-+
-+ SDA_DIS();
-+ SCL_HI();
-+ SDA_IN(i);
-+ SCL_LO();
-+ SDA_EN();
-+
-+ for (i = 7; i >= 0; i--)
-+ {
-+ if (byte & (1 << i))
-+ SDA_HI();
-+ else
-+ SDA_LO();
-+ SCL_HI();
-+ SCL_LO();
-+ }
-+
-+ SDA_DIS();
-+ SCL_HI();
-+ SDA_IN(i);
-+ SCL_LO();
-+
-+ SDA_HI();
-+ SDA_EN();
-+
-+ SDA_LO();
-+ SCL_HI();
-+ SDA_HI();
-+ SCL_LO();
-+ SCL_HI();
-+
-+ return 0;
-+}
-+
-+static unsigned int i2c_pld_read_byte(int address)
-+{
-+ int i = 0, byte = 0;
-+ int bit;
-+
-+ address = (address << 1) | 0x1;
-+
-+ SDA_HI();
-+ SDA_EN();
-+ SCL_EN();
-+ SCL_HI();
-+ SDA_LO();
-+ SCL_LO();
-+
-+ for (i = 7; i >= 0; i--)
-+ {
-+ if (address & (1 << i))
-+ SDA_HI();
-+ else
-+ SDA_LO();
-+
-+ SCL_HI();
-+ SCL_LO();
-+ }
-+
-+ SDA_DIS();
-+ SCL_HI();
-+ SDA_IN(i);
-+ SCL_LO();
-+ SDA_EN();
-+
-+ SDA_DIS();
-+ for (i = 7; i >= 0; i--)
-+ {
-+ SCL_HI();
-+ SDA_IN(bit);
-+ byte |= bit << i;
-+ SCL_LO();
-+ }
-+
-+ SDA_LO();
-+ SCL_HI();
-+ SDA_HI();
-+ SCL_LO();
-+ SCL_HI();
-+
-+ return byte;
-+}
-+
-+
-+static int gw_i2c_pld_input8(struct gpio_chip *chip, unsigned offset)
-+{
-+ int ret;
-+ struct gw_i2c_pld *gpio = container_of(chip, struct gw_i2c_pld, chip);
-+ struct i2c_adapter *adap = gpio->client->adapter;
-+
-+ if (in_atomic() || irqs_disabled()) {
-+ ret = mutex_trylock(&adap->bus_lock);
-+ if (!ret)
-+ /* I2C activity is ongoing. */
-+ return -EAGAIN;
-+ } else {
-+ mutex_lock_nested(&adap->bus_lock, adap->level);
-+ }
-+
-+ gpio->out |= (1 << offset);
-+
-+ ret = i2c_pld_write_byte(gpio->client->addr, gpio->out);
-+
-+ mutex_unlock(&adap->bus_lock);
-+
-+ return ret;
-+}
-+
-+static int gw_i2c_pld_get8(struct gpio_chip *chip, unsigned offset)
-+{
-+ int ret;
-+ s32 value;
-+ struct gw_i2c_pld *gpio = container_of(chip, struct gw_i2c_pld, chip);
-+ struct i2c_adapter *adap = gpio->client->adapter;
-+
-+ if (in_atomic() || irqs_disabled()) {
-+ ret = mutex_trylock(&adap->bus_lock);
-+ if (!ret)
-+ /* I2C activity is ongoing. */
-+ return -EAGAIN;
-+ } else {
-+ mutex_lock_nested(&adap->bus_lock, adap->level);
-+ }
-+
-+ value = i2c_pld_read_byte(gpio->client->addr);
-+
-+ mutex_unlock(&adap->bus_lock);
-+
-+ return (value < 0) ? 0 : (value & (1 << offset));
-+}
-+
-+static int gw_i2c_pld_output8(struct gpio_chip *chip, unsigned offset, int value)
-+{
-+ int ret;
-+
-+ struct gw_i2c_pld *gpio = container_of(chip, struct gw_i2c_pld, chip);
-+ struct i2c_adapter *adap = gpio->client->adapter;
-+
-+ unsigned bit = 1 << offset;
-+
-+ if (in_atomic() || irqs_disabled()) {
-+ ret = mutex_trylock(&adap->bus_lock);
-+ if (!ret)
-+ /* I2C activity is ongoing. */
-+ return -EAGAIN;
-+ } else {
-+ mutex_lock_nested(&adap->bus_lock, adap->level);
-+ }
-+
-+
-+ if (value)
-+ gpio->out |= bit;
-+ else
-+ gpio->out &= ~bit;
-+
-+ ret = i2c_pld_write_byte(gpio->client->addr, gpio->out);
-+
-+ mutex_unlock(&adap->bus_lock);
-+
-+ return ret;
-+}
-+
-+static void gw_i2c_pld_set8(struct gpio_chip *chip, unsigned offset, int value)
-+{
-+ gw_i2c_pld_output8(chip, offset, value);
-+}
-+
-+/*-------------------------------------------------------------------------*/
-+
-+static int gw_i2c_pld_probe(struct i2c_client *client,
-+ const struct i2c_device_id *id)
-+{
-+ struct gw_i2c_pld_platform_data *pdata;
-+ struct gw_i2c_pld *gpio;
-+ int status;
-+
-+ pdata = client->dev.platform_data;
-+ if (!pdata)
-+ return -ENODEV;
-+
-+ /* Allocate, initialize, and register this gpio_chip. */
-+ gpio = kzalloc(sizeof *gpio, GFP_KERNEL);
-+ if (!gpio)
-+ return -ENOMEM;
-+
-+ gpio->chip.base = pdata->gpio_base;
-+ gpio->chip.can_sleep = 1;
-+ gpio->chip.dev = &client->dev;
-+ gpio->chip.owner = THIS_MODULE;
-+
-+ gpio->chip.ngpio = pdata->nr_gpio;
-+ gpio->chip.direction_input = gw_i2c_pld_input8;
-+ gpio->chip.get = gw_i2c_pld_get8;
-+ gpio->chip.direction_output = gw_i2c_pld_output8;
-+ gpio->chip.set = gw_i2c_pld_set8;
-+
-+ gpio->chip.label = client->name;
-+
-+ gpio->client = client;
-+ i2c_set_clientdata(client, gpio);
-+
-+ gpio->out = 0xFF;
-+
-+ status = gpiochip_add(&gpio->chip);
-+ if (status < 0)
-+ goto fail;
-+
-+ dev_info(&client->dev, "gpios %d..%d on a %s%s\n",
-+ gpio->chip.base,
-+ gpio->chip.base + gpio->chip.ngpio - 1,
-+ client->name,
-+ client->irq ? " (irq ignored)" : "");
-+
-+ /* Let platform code set up the GPIOs and their users.
-+ * Now is the first time anyone could use them.
-+ */
-+ if (pdata->setup) {
-+ status = pdata->setup(client,
-+ gpio->chip.base, gpio->chip.ngpio,
-+ pdata->context);
-+ if (status < 0)
-+ dev_warn(&client->dev, "setup --> %d\n", status);
-+ }
-+
-+ return 0;
-+
-+fail:
-+ dev_dbg(&client->dev, "probe error %d for '%s'\n",
-+ status, client->name);
-+ kfree(gpio);
-+ return status;
-+}
-+
-+static int gw_i2c_pld_remove(struct i2c_client *client)
-+{
-+ struct gw_i2c_pld_platform_data *pdata = client->dev.platform_data;
-+ struct gw_i2c_pld *gpio = i2c_get_clientdata(client);
-+ int status = 0;
-+
-+ if (pdata->teardown) {
-+ status = pdata->teardown(client,
-+ gpio->chip.base, gpio->chip.ngpio,
-+ pdata->context);
-+ if (status < 0) {
-+ dev_err(&client->dev, "%s --> %d\n",
-+ "teardown", status);
-+ return status;
-+ }
-+ }
-+
-+ status = gpiochip_remove(&gpio->chip);
-+ if (status == 0)
-+ kfree(gpio);
-+ else
-+ dev_err(&client->dev, "%s --> %d\n", "remove", status);
-+ return status;
-+}
-+
-+static struct i2c_driver gw_i2c_pld_driver = {
-+ .driver = {
-+ .name = "gw_i2c_pld",
-+ .owner = THIS_MODULE,
-+ },
-+ .probe = gw_i2c_pld_probe,
-+ .remove = gw_i2c_pld_remove,
-+ .id_table = gw_i2c_pld_id,
-+};
-+
-+static int __init gw_i2c_pld_init(void)
-+{
-+ return i2c_add_driver(&gw_i2c_pld_driver);
-+}
-+module_init(gw_i2c_pld_init);
-+
-+static void __exit gw_i2c_pld_exit(void)
-+{
-+ i2c_del_driver(&gw_i2c_pld_driver);
-+}
-+module_exit(gw_i2c_pld_exit);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Chris Lang");
---- a/drivers/gpio/Kconfig
-+++ b/drivers/gpio/Kconfig
-@@ -221,6 +221,14 @@ config GPIO_TIMBERDALE
- ---help---
- Add support for the GPIO IP in the timberdale FPGA.
-
-+config GPIO_GW_I2C_PLD
-+ tristate "Gateworks I2C PLD GPIO Expander"
-+ depends on I2C
-+ help
-+ Say yes here to provide access to the Gateworks I2C PLD GPIO
-+ Expander. This is used at least on the GW2358-4.
-+
-+
- comment "SPI GPIO expanders:"
-
- config GPIO_MAX7301
---- a/drivers/gpio/Makefile
-+++ b/drivers/gpio/Makefile
-@@ -31,3 +31,4 @@ obj-$(CONFIG_GPIO_WM8994) += wm8994-gpio
- obj-$(CONFIG_GPIO_SCH) += sch_gpio.o
- obj-$(CONFIG_GPIO_RDC321X) += rdc321x-gpio.o
- obj-$(CONFIG_GPIO_JANZ_TTL) += janz-ttl.o
-+obj-$(CONFIG_GPIO_GW_I2C_PLD) += gw_i2c_pld.o
---- /dev/null
-+++ b/include/linux/i2c/gw_i2c_pld.h
-@@ -0,0 +1,20 @@
-+#ifndef __LINUX_GW_I2C_PLD_H
-+#define __LINUX_GW_I2C_PLD_H
-+
-+/**
-+ * The Gateworks I2C PLD Implements an additional 8 bits of GPIO through the PLD
-+ */
-+
-+struct gw_i2c_pld_platform_data {
-+ unsigned gpio_base;
-+ unsigned nr_gpio;
-+ int (*setup)(struct i2c_client *client,
-+ int gpio, unsigned ngpio,
-+ void *context);
-+ int (*teardown)(struct i2c_client *client,
-+ int gpio, unsigned ngpio,
-+ void *context);
-+ void *context;
-+};
-+
-+#endif /* __LINUX_GW_I2C_PLD_H */
diff --git a/target/linux/ixp4xx/patches-2.6.35/050-disable_dmabounce.patch b/target/linux/ixp4xx/patches-2.6.35/050-disable_dmabounce.patch
deleted file mode 100644
index f5d0a58c6..000000000
--- a/target/linux/ixp4xx/patches-2.6.35/050-disable_dmabounce.patch
+++ /dev/null
@@ -1,120 +0,0 @@
---- a/arch/arm/Kconfig
-+++ b/arch/arm/Kconfig
-@@ -435,7 +435,6 @@ config ARCH_IXP4XX
- select CPU_XSCALE
- select GENERIC_GPIO
- select GENERIC_CLOCKEVENTS
-- select DMABOUNCE if PCI
- help
- Support for Intel's IXP4XX (XScale) family of processors.
-
---- a/arch/arm/mach-ixp4xx/Kconfig
-+++ b/arch/arm/mach-ixp4xx/Kconfig
-@@ -199,6 +199,43 @@ config IXP4XX_INDIRECT_PCI
- need to use the indirect method instead. If you don't know
- what you need, leave this option unselected.
-
-+config IXP4XX_LEGACY_DMABOUNCE
-+ bool "Legacy PCI DMA bounce support"
-+ depends on PCI
-+ default n
-+ select DMABOUNCE
-+ help
-+ The IXP4xx is limited to a 64MB window for PCI DMA, which
-+ requires that PCI accesses >= 64MB are bounced via buffers
-+ below 64MB.
-+
-+ The kernel has traditionally handled this issue by using ARM
-+ specific DMA bounce support code for all accesses >= 64MB.
-+ That code causes problems of its own, so it is desirable to
-+ disable it.
-+
-+ Enabling this option makes IXP4xx continue to use the problematic
-+ ARM DMA bounce code. Disabling this option makes IXP4xx use the
-+ kernel's generic bounce code.
-+
-+ Say 'N'.
-+
-+config IXP4XX_ZONE_DMA
-+ bool "Support > 64MB RAM"
-+ depends on !IXP4XX_LEGACY_DMABOUNCE
-+ default y
-+ select ZONE_DMA
-+ help
-+ The IXP4xx is limited to a 64MB window for PCI DMA, which
-+ requires that PCI accesses above 64MB are bounced via buffers
-+ below 64MB.
-+
-+ Disabling this option allows you to omit the support code for
-+ DMA-able memory allocations and DMA bouncing, but the kernel
-+ will then not work properly if more than 64MB of RAM is present.
-+
-+ Say 'Y' unless your platform is limited to <= 64MB of RAM.
-+
- config IXP4XX_QMGR
- tristate "IXP4xx Queue Manager support"
- help
---- a/arch/arm/mach-ixp4xx/common-pci.c
-+++ b/arch/arm/mach-ixp4xx/common-pci.c
-@@ -321,27 +321,33 @@ static int abort_handler(unsigned long a
- */
- static int ixp4xx_pci_platform_notify(struct device *dev)
- {
-- if(dev->bus == &pci_bus_type) {
-- *dev->dma_mask = SZ_64M - 1;
-+ if (dev->bus == &pci_bus_type) {
-+ *dev->dma_mask = SZ_64M - 1;
- dev->coherent_dma_mask = SZ_64M - 1;
-+#ifdef CONFIG_DMABOUNCE
- dmabounce_register_dev(dev, 2048, 4096);
-+#endif
- }
- return 0;
- }
-
- static int ixp4xx_pci_platform_notify_remove(struct device *dev)
- {
-- if(dev->bus == &pci_bus_type) {
-+#ifdef CONFIG_DMABOUNCE
-+ if (dev->bus == &pci_bus_type)
- dmabounce_unregister_dev(dev);
-- }
-+#endif
- return 0;
- }
-
-+#ifdef CONFIG_DMABOUNCE
- int dma_needs_bounce(struct device *dev, dma_addr_t dma_addr, size_t size)
- {
-- return (dev->bus == &pci_bus_type ) && ((dma_addr + size) >= SZ_64M);
-+ return (dev->bus == &pci_bus_type ) && ((dma_addr + size) > SZ_64M);
- }
-+#endif
-
-+#ifdef CONFIG_ZONE_DMA
- /*
- * Only first 64MB of memory can be accessed via PCI.
- * We use GFP_DMA to allocate safe buffers to do map/unmap.
-@@ -364,6 +370,7 @@ void __init ixp4xx_adjust_zones(int node
- zhole_size[1] = zhole_size[0];
- zhole_size[0] = 0;
- }
-+#endif
-
- void __init ixp4xx_pci_preinit(void)
- {
---- a/arch/arm/mach-ixp4xx/include/mach/memory.h
-+++ b/arch/arm/mach-ixp4xx/include/mach/memory.h
-@@ -16,10 +16,12 @@
-
- #if !defined(__ASSEMBLY__) && defined(CONFIG_PCI)
-
-+#ifdef CONFIG_ZONE_DMA
- void ixp4xx_adjust_zones(int node, unsigned long *size, unsigned long *holes);
-
- #define arch_adjust_zones(node, size, holes) \
- ixp4xx_adjust_zones(node, size, holes)
-+#endif
-
- #define ISA_DMA_THRESHOLD (SZ_64M - 1)
- #define MAX_DMA_ADDRESS (PAGE_OFFSET + SZ_64M)
diff --git a/target/linux/ixp4xx/patches-2.6.35/090-increase_entropy_pools.patch b/target/linux/ixp4xx/patches-2.6.35/090-increase_entropy_pools.patch
deleted file mode 100644
index 1a446602a..000000000
--- a/target/linux/ixp4xx/patches-2.6.35/090-increase_entropy_pools.patch
+++ /dev/null
@@ -1,15 +0,0 @@
---- a/drivers/char/random.c
-+++ b/drivers/char/random.c
-@@ -264,9 +264,9 @@
- /*
- * Configuration information
- */
--#define INPUT_POOL_WORDS 128
--#define OUTPUT_POOL_WORDS 32
--#define SEC_XFER_SIZE 512
-+#define INPUT_POOL_WORDS 256
-+#define OUTPUT_POOL_WORDS 64
-+#define SEC_XFER_SIZE 1024
- #define EXTRACT_SIZE 10
-
- /*
diff --git a/target/linux/ixp4xx/patches-2.6.35/100-wg302v2_gateway7001_mac_plat_info.patch b/target/linux/ixp4xx/patches-2.6.35/100-wg302v2_gateway7001_mac_plat_info.patch
deleted file mode 100644
index a19a4085a..000000000
--- a/target/linux/ixp4xx/patches-2.6.35/100-wg302v2_gateway7001_mac_plat_info.patch
+++ /dev/null
@@ -1,68 +0,0 @@
---- a/arch/arm/mach-ixp4xx/gateway7001-setup.c
-+++ b/arch/arm/mach-ixp4xx/gateway7001-setup.c
-@@ -76,9 +76,35 @@ static struct platform_device gateway700
- .resource = &gateway7001_uart_resource,
- };
-
-+static struct eth_plat_info gateway7001_plat_eth[] = {
-+ {
-+ .phy = 1,
-+ .rxq = 3,
-+ .txreadyq = 20,
-+ }, {
-+ .phy = 2,
-+ .rxq = 4,
-+ .txreadyq = 21,
-+ }
-+};
-+
-+static struct platform_device gateway7001_eth[] = {
-+ {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEB,
-+ .dev.platform_data = gateway7001_plat_eth,
-+ }, {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEC,
-+ .dev.platform_data = gateway7001_plat_eth + 1,
-+ }
-+};
-+
- static struct platform_device *gateway7001_devices[] __initdata = {
- &gateway7001_flash,
-- &gateway7001_uart
-+ &gateway7001_uart,
-+ &gateway7001_eth[0],
-+ &gateway7001_eth[1],
- };
-
- static void __init gateway7001_init(void)
---- a/arch/arm/mach-ixp4xx/wg302v2-setup.c
-+++ b/arch/arm/mach-ixp4xx/wg302v2-setup.c
-@@ -77,9 +77,26 @@ static struct platform_device wg302v2_ua
- .resource = &wg302v2_uart_resource,
- };
-
-+static struct eth_plat_info wg302v2_plat_eth[] = {
-+ {
-+ .phy = 8,
-+ .rxq = 3,
-+ .txreadyq = 20,
-+ }
-+};
-+
-+static struct platform_device wg302v2_eth[] = {
-+ {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEB,
-+ .dev.platform_data = wg302v2_plat_eth,
-+ }
-+};
-+
- static struct platform_device *wg302v2_devices[] __initdata = {
- &wg302v2_flash,
- &wg302v2_uart,
-+ &wg302v2_eth[0],
- };
-
- static void __init wg302v2_init(void)
diff --git a/target/linux/ixp4xx/patches-2.6.35/105-wg302v1_support.patch b/target/linux/ixp4xx/patches-2.6.35/105-wg302v1_support.patch
deleted file mode 100644
index e8b4342e7..000000000
--- a/target/linux/ixp4xx/patches-2.6.35/105-wg302v1_support.patch
+++ /dev/null
@@ -1,257 +0,0 @@
---- a/arch/arm/configs/ixp4xx_defconfig
-+++ b/arch/arm/configs/ixp4xx_defconfig
-@@ -155,6 +155,7 @@ CONFIG_MACH_AVILA=y
- CONFIG_MACH_LOFT=y
- CONFIG_ARCH_ADI_COYOTE=y
- CONFIG_MACH_GATEWAY7001=y
-+CONFIG_MACH_WG302V1=y
- CONFIG_MACH_WG302V2=y
- CONFIG_ARCH_IXDP425=y
- CONFIG_MACH_IXDPG425=y
---- a/arch/arm/mach-ixp4xx/Kconfig
-+++ b/arch/arm/mach-ixp4xx/Kconfig
-@@ -49,6 +49,14 @@ config MACH_GATEWAY7001
- 7001 Access Point. For more information on this platform,
- see http://openwrt.org
-
-+config MACH_WG302V1
-+ bool "Netgear WG302 v1 / WAG302 v1"
-+ select PCI
-+ help
-+ Say 'Y' here if you want your kernel to support Netgear's
-+ WG302 v1 or WAG302 v1 Access Points. For more information
-+ on this platform, see http://openwrt.org
-+
- config MACH_WG302V2
- bool "Netgear WG302 v2 / WAG302 v2"
- select PCI
---- a/arch/arm/mach-ixp4xx/Makefile
-+++ b/arch/arm/mach-ixp4xx/Makefile
-@@ -14,6 +14,7 @@ obj-pci-$(CONFIG_MACH_NSLU2) += nslu2-p
- obj-pci-$(CONFIG_MACH_NAS100D) += nas100d-pci.o
- obj-pci-$(CONFIG_MACH_DSMG600) += dsmg600-pci.o
- obj-pci-$(CONFIG_MACH_GATEWAY7001) += gateway7001-pci.o
-+obj-pci-$(CONFIG_MACH_WG302V1) += wg302v1-pci.o
- obj-pci-$(CONFIG_MACH_WG302V2) += wg302v2-pci.o
- obj-pci-$(CONFIG_MACH_FSG) += fsg-pci.o
-
-@@ -28,6 +29,7 @@ obj-$(CONFIG_MACH_NSLU2) += nslu2-setup.
- obj-$(CONFIG_MACH_NAS100D) += nas100d-setup.o
- obj-$(CONFIG_MACH_DSMG600) += dsmg600-setup.o
- obj-$(CONFIG_MACH_GATEWAY7001) += gateway7001-setup.o
-+obj-$(CONFIG_MACH_WG302V1) += wg302v1-setup.o
- obj-$(CONFIG_MACH_WG302V2) += wg302v2-setup.o
- obj-$(CONFIG_MACH_FSG) += fsg-setup.o
- obj-$(CONFIG_MACH_GORAMO_MLR) += goramo_mlr.o
---- /dev/null
-+++ b/arch/arm/mach-ixp4xx/wg302v1-pci.c
-@@ -0,0 +1,64 @@
-+/*
-+ * arch/arch/mach-ixp4xx/wg302v1-pci.c
-+ *
-+ * PCI setup routines for the Netgear WG302 v1 and WAG302 v1
-+ *
-+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * based on coyote-pci.c:
-+ * Copyright (C) 2002 Jungo Software Technologies.
-+ * Copyright (C) 2003 MontaVista Software, Inc.
-+ *
-+ * Maintainer: Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/pci.h>
-+#include <linux/init.h>
-+#include <linux/irq.h>
-+
-+#include <asm/mach-types.h>
-+#include <mach/hardware.h>
-+
-+#include <asm/mach/pci.h>
-+
-+void __init wg302v1_pci_preinit(void)
-+{
-+ set_irq_type(IRQ_IXP4XX_GPIO8, IRQ_TYPE_LEVEL_LOW);
-+ set_irq_type(IRQ_IXP4XX_GPIO10, IRQ_TYPE_LEVEL_LOW);
-+
-+ ixp4xx_pci_preinit();
-+}
-+
-+static int __init wg302v1_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+ if (slot == 1)
-+ return IRQ_IXP4XX_GPIO8;
-+ else if (slot == 2)
-+ return IRQ_IXP4XX_GPIO10;
-+ else
-+ return -1;
-+}
-+
-+struct hw_pci wg302v1_pci __initdata = {
-+ .nr_controllers = 1,
-+ .preinit = wg302v1_pci_preinit,
-+ .swizzle = pci_std_swizzle,
-+ .setup = ixp4xx_setup,
-+ .scan = ixp4xx_scan_bus,
-+ .map_irq = wg302v1_map_irq,
-+};
-+
-+int __init wg302v1_pci_init(void)
-+{
-+ if (machine_is_wg302v1())
-+ pci_common_init(&wg302v1_pci);
-+ return 0;
-+}
-+
-+subsys_initcall(wg302v1_pci_init);
---- /dev/null
-+++ b/arch/arm/mach-ixp4xx/wg302v1-setup.c
-@@ -0,0 +1,142 @@
-+/*
-+ * arch/arm/mach-ixp4xx/wg302v1-setup.c
-+ *
-+ * Board setup for the Netgear WG302 v1 and WAG302 v1
-+ *
-+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * based on coyote-setup.c:
-+ * Copyright (C) 2003-2005 MontaVista Software, Inc.
-+ *
-+ * Author: Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/device.h>
-+#include <linux/serial.h>
-+#include <linux/tty.h>
-+#include <linux/serial_8250.h>
-+#include <linux/slab.h>
-+#include <linux/types.h>
-+#include <linux/memory.h>
-+
-+#include <asm/setup.h>
-+#include <mach/hardware.h>
-+#include <asm/irq.h>
-+#include <asm/mach-types.h>
-+#include <asm/mach/arch.h>
-+#include <asm/mach/flash.h>
-+
-+static struct flash_platform_data wg302v1_flash_data = {
-+ .map_name = "cfi_probe",
-+ .width = 2,
-+};
-+
-+static struct resource wg302v1_flash_resource = {
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct platform_device wg302v1_flash = {
-+ .name = "IXP4XX-Flash",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = &wg302v1_flash_data,
-+ },
-+ .num_resources = 1,
-+ .resource = &wg302v1_flash_resource,
-+};
-+
-+static struct resource wg302v1_uart_resources[] = {
-+ {
-+ .start = IXP4XX_UART1_BASE_PHYS,
-+ .end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ {
-+ .start = IXP4XX_UART2_BASE_PHYS,
-+ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM,
-+ }
-+};
-+
-+static struct plat_serial8250_port wg302v1_uart_data[] = {
-+ {
-+ .mapbase = IXP4XX_UART1_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART1,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ {
-+ .mapbase = IXP4XX_UART2_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART2,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ { },
-+};
-+
-+static struct platform_device wg302v1_uart = {
-+ .name = "serial8250",
-+ .id = PLAT8250_DEV_PLATFORM,
-+ .dev = {
-+ .platform_data = wg302v1_uart_data,
-+ },
-+ .num_resources = 2,
-+ .resource = wg302v1_uart_resources,
-+};
-+
-+static struct eth_plat_info wg302v1_plat_eth[] = {
-+ {
-+ .phy = 30,
-+ .rxq = 3,
-+ .txreadyq = 20,
-+ }
-+};
-+
-+static struct platform_device wg302v1_eth[] = {
-+ {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEB,
-+ .dev.platform_data = wg302v1_plat_eth,
-+ }
-+};
-+
-+static struct platform_device *wg302v1_devices[] __initdata = {
-+ &wg302v1_flash,
-+ &wg302v1_uart,
-+ &wg302v1_eth[0],
-+};
-+
-+static void __init wg302v1_init(void)
-+{
-+ ixp4xx_sys_init();
-+
-+ wg302v1_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-+ wg302v1_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
-+
-+ *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
-+ *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
-+
-+ platform_add_devices(wg302v1_devices, ARRAY_SIZE(wg302v1_devices));
-+}
-+
-+#ifdef CONFIG_MACH_WG302V1
-+MACHINE_START(WG302V1, "Netgear WG302 v1 / WAG302 v1")
-+ /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
-+ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
-+ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
-+ .map_io = ixp4xx_map_io,
-+ .init_irq = ixp4xx_init_irq,
-+ .timer = &ixp4xx_timer,
-+ .boot_params = 0x0100,
-+ .init_machine = wg302v1_init,
-+MACHINE_END
-+#endif
diff --git a/target/linux/ixp4xx/patches-2.6.35/110-pronghorn_series_support.patch b/target/linux/ixp4xx/patches-2.6.35/110-pronghorn_series_support.patch
deleted file mode 100644
index c03869226..000000000
--- a/target/linux/ixp4xx/patches-2.6.35/110-pronghorn_series_support.patch
+++ /dev/null
@@ -1,387 +0,0 @@
---- a/arch/arm/configs/ixp4xx_defconfig
-+++ b/arch/arm/configs/ixp4xx_defconfig
-@@ -157,6 +157,8 @@ CONFIG_ARCH_ADI_COYOTE=y
- CONFIG_MACH_GATEWAY7001=y
- CONFIG_MACH_WG302V1=y
- CONFIG_MACH_WG302V2=y
-+CONFIG_MACH_PRONGHORN=y
-+CONFIG_MACH_PRONGHORNMETRO=y
- CONFIG_ARCH_IXDP425=y
- CONFIG_MACH_IXDPG425=y
- CONFIG_MACH_IXDP465=y
---- a/arch/arm/mach-ixp4xx/Kconfig
-+++ b/arch/arm/mach-ixp4xx/Kconfig
-@@ -65,6 +65,22 @@ config MACH_WG302V2
- WG302 v2 or WAG302 v2 Access Points. For more information
- on this platform, see http://openwrt.org
-
-+config MACH_PRONGHORN
-+ bool "ADI Pronghorn series"
-+ select PCI
-+ help
-+ Say 'Y' here if you want your kernel to support the ADI
-+ Engineering Pronghorn series. For more
-+ information on this platform, see http://www.adiengineering.com
-+
-+#
-+# There're only minimal differences kernel-wise between the Pronghorn and
-+# Pronghorn Metro boards - they use different chip selects to drive the
-+# CF slot connected to the expansion bus, so we just enable them together.
-+#
-+config MACH_PRONGHORNMETRO
-+ def_bool MACH_PRONGHORN
-+
- config ARCH_IXDP425
- bool "IXDP425"
- help
---- a/arch/arm/mach-ixp4xx/Makefile
-+++ b/arch/arm/mach-ixp4xx/Makefile
-@@ -17,6 +17,7 @@ obj-pci-$(CONFIG_MACH_GATEWAY7001) += ga
- obj-pci-$(CONFIG_MACH_WG302V1) += wg302v1-pci.o
- obj-pci-$(CONFIG_MACH_WG302V2) += wg302v2-pci.o
- obj-pci-$(CONFIG_MACH_FSG) += fsg-pci.o
-+obj-pci-$(CONFIG_MACH_PRONGHORN) += pronghorn-pci.o
-
- obj-y += common.o
-
-@@ -33,6 +34,7 @@ obj-$(CONFIG_MACH_WG302V1) += wg302v1-se
- obj-$(CONFIG_MACH_WG302V2) += wg302v2-setup.o
- obj-$(CONFIG_MACH_FSG) += fsg-setup.o
- obj-$(CONFIG_MACH_GORAMO_MLR) += goramo_mlr.o
-+obj-$(CONFIG_MACH_PRONGHORN) += pronghorn-setup.o
-
- obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o
- obj-$(CONFIG_IXP4XX_QMGR) += ixp4xx_qmgr.o
---- /dev/null
-+++ b/arch/arm/mach-ixp4xx/pronghorn-pci.c
-@@ -0,0 +1,70 @@
-+/*
-+ * arch/arch/mach-ixp4xx/pronghorn-pci.c
-+ *
-+ * PCI setup routines for ADI Engineering Pronghorn series
-+ *
-+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * based on coyote-pci.c:
-+ * Copyright (C) 2002 Jungo Software Technologies.
-+ * Copyright (C) 2003 MontaVista Softwrae, Inc.
-+ *
-+ * Maintainer: Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/pci.h>
-+#include <linux/init.h>
-+#include <linux/irq.h>
-+
-+#include <asm/mach-types.h>
-+#include <mach/hardware.h>
-+
-+#include <asm/mach/pci.h>
-+
-+void __init pronghorn_pci_preinit(void)
-+{
-+ set_irq_type(IRQ_IXP4XX_GPIO4, IRQ_TYPE_LEVEL_LOW);
-+ set_irq_type(IRQ_IXP4XX_GPIO6, IRQ_TYPE_LEVEL_LOW);
-+ set_irq_type(IRQ_IXP4XX_GPIO11, IRQ_TYPE_LEVEL_LOW);
-+ set_irq_type(IRQ_IXP4XX_GPIO1, IRQ_TYPE_LEVEL_LOW);
-+
-+ ixp4xx_pci_preinit();
-+}
-+
-+static int __init pronghorn_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+ if (slot == 13)
-+ return IRQ_IXP4XX_GPIO4;
-+ else if (slot == 14)
-+ return IRQ_IXP4XX_GPIO6;
-+ else if (slot == 15)
-+ return IRQ_IXP4XX_GPIO11;
-+ else if (slot == 16)
-+ return IRQ_IXP4XX_GPIO1;
-+ else
-+ return -1;
-+}
-+
-+struct hw_pci pronghorn_pci __initdata = {
-+ .nr_controllers = 1,
-+ .preinit = pronghorn_pci_preinit,
-+ .swizzle = pci_std_swizzle,
-+ .setup = ixp4xx_setup,
-+ .scan = ixp4xx_scan_bus,
-+ .map_irq = pronghorn_map_irq,
-+};
-+
-+int __init pronghorn_pci_init(void)
-+{
-+ if (machine_is_pronghorn() || machine_is_pronghorn_metro())
-+ pci_common_init(&pronghorn_pci);
-+ return 0;
-+}
-+
-+subsys_initcall(pronghorn_pci_init);
---- /dev/null
-+++ b/arch/arm/mach-ixp4xx/pronghorn-setup.c
-@@ -0,0 +1,245 @@
-+/*
-+ * arch/arm/mach-ixp4xx/pronghorn-setup.c
-+ *
-+ * Board setup for the ADI Engineering Pronghorn series
-+ *
-+ * Copyright (C) 2008 Imre Kaloz <Kaloz@openwrt.org>
-+ *
-+ * based on coyote-setup.c:
-+ * Copyright (C) 2003-2005 MontaVista Software, Inc.
-+ *
-+ * Author: Imre Kaloz <Kaloz@openwrt.org>
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/device.h>
-+#include <linux/serial.h>
-+#include <linux/tty.h>
-+#include <linux/serial_8250.h>
-+#include <linux/slab.h>
-+#include <linux/types.h>
-+#include <linux/memory.h>
-+#include <linux/i2c-gpio.h>
-+#include <linux/leds.h>
-+
-+#include <asm/setup.h>
-+#include <mach/hardware.h>
-+#include <asm/irq.h>
-+#include <asm/mach-types.h>
-+#include <asm/mach/arch.h>
-+#include <asm/mach/flash.h>
-+
-+static struct flash_platform_data pronghorn_flash_data = {
-+ .map_name = "cfi_probe",
-+ .width = 2,
-+};
-+
-+static struct resource pronghorn_flash_resource = {
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct platform_device pronghorn_flash = {
-+ .name = "IXP4XX-Flash",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = &pronghorn_flash_data,
-+ },
-+ .num_resources = 1,
-+ .resource = &pronghorn_flash_resource,
-+};
-+
-+static struct resource pronghorn_uart_resources [] = {
-+ {
-+ .start = IXP4XX_UART1_BASE_PHYS,
-+ .end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM
-+ },
-+ {
-+ .start = IXP4XX_UART2_BASE_PHYS,
-+ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM
-+ }
-+};
-+
-+static struct plat_serial8250_port pronghorn_uart_data[] = {
-+ {
-+ .mapbase = IXP4XX_UART1_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART1,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ {
-+ .mapbase = IXP4XX_UART2_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART2,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ { },
-+};
-+
-+static struct platform_device pronghorn_uart = {
-+ .name = "serial8250",
-+ .id = PLAT8250_DEV_PLATFORM,
-+ .dev = {
-+ .platform_data = pronghorn_uart_data,
-+ },
-+ .num_resources = 2,
-+ .resource = pronghorn_uart_resources,
-+};
-+
-+static struct i2c_gpio_platform_data pronghorn_i2c_gpio_data = {
-+ .sda_pin = 9,
-+ .scl_pin = 10,
-+};
-+
-+static struct platform_device pronghorn_i2c_gpio = {
-+ .name = "i2c-gpio",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = &pronghorn_i2c_gpio_data,
-+ },
-+};
-+
-+static struct gpio_led pronghorn_led_pin[] = {
-+ {
-+ .name = "pronghorn:green:status",
-+ .gpio = 7,
-+ }
-+};
-+
-+static struct gpio_led_platform_data pronghorn_led_data = {
-+ .num_leds = 1,
-+ .leds = pronghorn_led_pin,
-+};
-+
-+static struct platform_device pronghorn_led = {
-+ .name = "leds-gpio",
-+ .id = -1,
-+ .dev.platform_data = &pronghorn_led_data,
-+};
-+
-+static struct resource pronghorn_pata_resources[] = {
-+ {
-+ .flags = IORESOURCE_MEM
-+ },
-+ {
-+ .flags = IORESOURCE_MEM,
-+ },
-+ {
-+ .name = "intrq",
-+ .start = IRQ_IXP4XX_GPIO0,
-+ .end = IRQ_IXP4XX_GPIO0,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct ixp4xx_pata_data pronghorn_pata_data = {
-+ .cs0_bits = 0xbfff0043,
-+ .cs1_bits = 0xbfff0043,
-+};
-+
-+static struct platform_device pronghorn_pata = {
-+ .name = "pata_ixp4xx_cf",
-+ .id = 0,
-+ .dev.platform_data = &pronghorn_pata_data,
-+ .num_resources = ARRAY_SIZE(pronghorn_pata_resources),
-+ .resource = pronghorn_pata_resources,
-+};
-+
-+static struct eth_plat_info pronghorn_plat_eth[] = {
-+ {
-+ .phy = 0,
-+ .rxq = 3,
-+ .txreadyq = 20,
-+ }, {
-+ .phy = 1,
-+ .rxq = 4,
-+ .txreadyq = 21,
-+ }
-+};
-+
-+static struct platform_device pronghorn_eth[] = {
-+ {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEB,
-+ .dev.platform_data = pronghorn_plat_eth,
-+ }, {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEC,
-+ .dev.platform_data = pronghorn_plat_eth + 1,
-+ }
-+};
-+
-+static struct platform_device *pronghorn_devices[] __initdata = {
-+ &pronghorn_flash,
-+ &pronghorn_uart,
-+ &pronghorn_led,
-+ &pronghorn_eth[0],
-+ &pronghorn_eth[1],
-+};
-+
-+static void __init pronghorn_init(void)
-+{
-+ ixp4xx_sys_init();
-+
-+ pronghorn_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-+ pronghorn_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
-+
-+ *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
-+ *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
-+
-+ platform_add_devices(pronghorn_devices, ARRAY_SIZE(pronghorn_devices));
-+
-+ if (machine_is_pronghorn()) {
-+ pronghorn_pata_resources[0].start = IXP4XX_EXP_BUS_BASE(2);
-+ pronghorn_pata_resources[0].end = IXP4XX_EXP_BUS_END(2);
-+
-+ pronghorn_pata_resources[1].start = IXP4XX_EXP_BUS_BASE(3);
-+ pronghorn_pata_resources[1].end = IXP4XX_EXP_BUS_END(3);
-+
-+ pronghorn_pata_data.cs0_cfg = IXP4XX_EXP_CS2;
-+ pronghorn_pata_data.cs1_cfg = IXP4XX_EXP_CS3;
-+ } else {
-+ pronghorn_pata_resources[0].start = IXP4XX_EXP_BUS_BASE(3);
-+ pronghorn_pata_resources[0].end = IXP4XX_EXP_BUS_END(3);
-+
-+ pronghorn_pata_resources[1].start = IXP4XX_EXP_BUS_BASE(4);
-+ pronghorn_pata_resources[1].end = IXP4XX_EXP_BUS_END(4);
-+
-+ pronghorn_pata_data.cs0_cfg = IXP4XX_EXP_CS3;
-+ pronghorn_pata_data.cs1_cfg = IXP4XX_EXP_CS4;
-+
-+ platform_device_register(&pronghorn_i2c_gpio);
-+ }
-+
-+ platform_device_register(&pronghorn_pata);
-+}
-+
-+MACHINE_START(PRONGHORN, "ADI Engineering Pronghorn")
-+ /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
-+ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
-+ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
-+ .map_io = ixp4xx_map_io,
-+ .init_irq = ixp4xx_init_irq,
-+ .timer = &ixp4xx_timer,
-+ .boot_params = 0x0100,
-+ .init_machine = pronghorn_init,
-+MACHINE_END
-+
-+MACHINE_START(PRONGHORNMETRO, "ADI Engineering Pronghorn Metro")
-+ /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
-+ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
-+ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
-+ .map_io = ixp4xx_map_io,
-+ .init_irq = ixp4xx_init_irq,
-+ .timer = &ixp4xx_timer,
-+ .boot_params = 0x0100,
-+ .init_machine = pronghorn_init,
-+MACHINE_END
---- a/arch/arm/mach-ixp4xx/include/mach/uncompress.h
-+++ b/arch/arm/mach-ixp4xx/include/mach/uncompress.h
-@@ -41,7 +41,8 @@ static __inline__ void __arch_decomp_set
- * Some boards are using UART2 as console
- */
- if (machine_is_adi_coyote() || machine_is_gtwx5715() ||
-- machine_is_gateway7001() || machine_is_wg302v2())
-+ machine_is_gateway7001() || machine_is_wg302v2() ||
-+ machine_is_pronghorn() || machine_is_pronghorn_metro())
- uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS;
- else
- uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;
diff --git a/target/linux/ixp4xx/patches-2.6.35/111-pronghorn_swap_uarts.patch b/target/linux/ixp4xx/patches-2.6.35/111-pronghorn_swap_uarts.patch
deleted file mode 100644
index b9fa50768..000000000
--- a/target/linux/ixp4xx/patches-2.6.35/111-pronghorn_swap_uarts.patch
+++ /dev/null
@@ -1,44 +0,0 @@
---- a/arch/arm/mach-ixp4xx/pronghorn-setup.c
-+++ b/arch/arm/mach-ixp4xx/pronghorn-setup.c
-@@ -51,31 +51,31 @@ static struct platform_device pronghorn_
-
- static struct resource pronghorn_uart_resources [] = {
- {
-- .start = IXP4XX_UART1_BASE_PHYS,
-- .end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
-+ .start = IXP4XX_UART2_BASE_PHYS,
-+ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
- .flags = IORESOURCE_MEM
- },
- {
-- .start = IXP4XX_UART2_BASE_PHYS,
-- .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
-+ .start = IXP4XX_UART1_BASE_PHYS,
-+ .end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
- .flags = IORESOURCE_MEM
- }
- };
-
- static struct plat_serial8250_port pronghorn_uart_data[] = {
- {
-- .mapbase = IXP4XX_UART1_BASE_PHYS,
-- .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
-- .irq = IRQ_IXP4XX_UART1,
-+ .mapbase = IXP4XX_UART2_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART2,
- .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
- .iotype = UPIO_MEM,
- .regshift = 2,
- .uartclk = IXP4XX_UART_XTAL,
- },
- {
-- .mapbase = IXP4XX_UART2_BASE_PHYS,
-- .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-- .irq = IRQ_IXP4XX_UART2,
-+ .mapbase = IXP4XX_UART1_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART1,
- .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
- .iotype = UPIO_MEM,
- .regshift = 2,
diff --git a/target/linux/ixp4xx/patches-2.6.35/115-sidewinder_support.patch b/target/linux/ixp4xx/patches-2.6.35/115-sidewinder_support.patch
deleted file mode 100644
index bad0826c8..000000000
--- a/target/linux/ixp4xx/patches-2.6.35/115-sidewinder_support.patch
+++ /dev/null
@@ -1,282 +0,0 @@
-From 60bdaaaf3446b4237566c6e04855186fc7bd766b Mon Sep 17 00:00:00 2001
-From: Imre Kaloz <kaloz@openwrt.org>
-Date: Sun, 13 Jul 2008 22:46:45 +0200
-Subject: [PATCH] Add support for the ADI Sidewinder
-
-Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
----
- arch/arm/mach-ixp4xx/Kconfig | 10 ++-
- arch/arm/mach-ixp4xx/Makefile | 2 +
- arch/arm/mach-ixp4xx/sidewinder-pci.c | 68 ++++++++++++++
- arch/arm/mach-ixp4xx/sidewinder-setup.c | 151 +++++++++++++++++++++++++++++++
- 4 files changed, 230 insertions(+), 1 deletions(-)
- create mode 100644 arch/arm/mach-ixp4xx/sidewinder-pci.c
- create mode 100644 arch/arm/mach-ixp4xx/sidewinder-setup.c
-
---- a/arch/arm/mach-ixp4xx/Kconfig
-+++ b/arch/arm/mach-ixp4xx/Kconfig
-@@ -81,6 +81,14 @@ config MACH_PRONGHORN
- config MACH_PRONGHORNMETRO
- def_bool MACH_PRONGHORN
-
-+config MACH_SIDEWINDER
-+ bool "ADI Sidewinder"
-+ select PCI
-+ help
-+ Say 'Y' here if you want your kernel to support the ADI
-+ Engineering Sidewinder board. For more information on this
-+ platform, see http://www.adiengineering.com
-+
- config ARCH_IXDP425
- bool "IXDP425"
- help
-@@ -169,7 +177,7 @@ config MACH_FSG
- #
- config CPU_IXP46X
- bool
-- depends on MACH_IXDP465
-+ depends on MACH_IXDP465 || MACH_SIDEWINDER
- default y
-
- config CPU_IXP43X
---- a/arch/arm/mach-ixp4xx/Makefile
-+++ b/arch/arm/mach-ixp4xx/Makefile
-@@ -18,6 +18,7 @@ obj-pci-$(CONFIG_MACH_WG302V1) += wg302
- obj-pci-$(CONFIG_MACH_WG302V2) += wg302v2-pci.o
- obj-pci-$(CONFIG_MACH_FSG) += fsg-pci.o
- obj-pci-$(CONFIG_MACH_PRONGHORN) += pronghorn-pci.o
-+obj-pci-$(CONFIG_MACH_SIDEWINDER) += sidewinder-pci.o
-
- obj-y += common.o
-
-@@ -35,6 +36,7 @@ obj-$(CONFIG_MACH_WG302V2) += wg302v2-se
- obj-$(CONFIG_MACH_FSG) += fsg-setup.o
- obj-$(CONFIG_MACH_GORAMO_MLR) += goramo_mlr.o
- obj-$(CONFIG_MACH_PRONGHORN) += pronghorn-setup.o
-+obj-$(CONFIG_MACH_SIDEWINDER) += sidewinder-setup.o
-
- obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o
- obj-$(CONFIG_IXP4XX_QMGR) += ixp4xx_qmgr.o
---- /dev/null
-+++ b/arch/arm/mach-ixp4xx/sidewinder-pci.c
-@@ -0,0 +1,68 @@
-+/*
-+ * arch/arch/mach-ixp4xx/pronghornmetro-pci.c
-+ *
-+ * PCI setup routines for ADI Engineering Sidewinder
-+ *
-+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * based on coyote-pci.c:
-+ * Copyright (C) 2002 Jungo Software Technologies.
-+ * Copyright (C) 2003 MontaVista Softwrae, Inc.
-+ *
-+ * Maintainer: Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/pci.h>
-+#include <linux/init.h>
-+#include <linux/irq.h>
-+
-+#include <asm/mach-types.h>
-+#include <mach/hardware.h>
-+#include <asm/irq.h>
-+
-+#include <asm/mach/pci.h>
-+
-+void __init sidewinder_pci_preinit(void)
-+{
-+ set_irq_type(IRQ_IXP4XX_GPIO11, IRQ_TYPE_LEVEL_LOW);
-+ set_irq_type(IRQ_IXP4XX_GPIO10, IRQ_TYPE_LEVEL_LOW);
-+ set_irq_type(IRQ_IXP4XX_GPIO9, IRQ_TYPE_LEVEL_LOW);
-+
-+ ixp4xx_pci_preinit();
-+}
-+
-+static int __init sidewinder_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+ if (slot == 1)
-+ return IRQ_IXP4XX_GPIO11;
-+ else if (slot == 2)
-+ return IRQ_IXP4XX_GPIO10;
-+ else if (slot == 3)
-+ return IRQ_IXP4XX_GPIO9;
-+ else
-+ return -1;
-+}
-+
-+struct hw_pci sidewinder_pci __initdata = {
-+ .nr_controllers = 1,
-+ .preinit = sidewinder_pci_preinit,
-+ .swizzle = pci_std_swizzle,
-+ .setup = ixp4xx_setup,
-+ .scan = ixp4xx_scan_bus,
-+ .map_irq = sidewinder_map_irq,
-+};
-+
-+int __init sidewinder_pci_init(void)
-+{
-+ if (machine_is_sidewinder())
-+ pci_common_init(&sidewinder_pci);
-+ return 0;
-+}
-+
-+subsys_initcall(sidewinder_pci_init);
---- /dev/null
-+++ b/arch/arm/mach-ixp4xx/sidewinder-setup.c
-@@ -0,0 +1,149 @@
-+/*
-+ * arch/arm/mach-ixp4xx/sidewinder-setup.c
-+ *
-+ * Board setup for the ADI Engineering Sidewinder
-+ *
-+ * Copyright (C) 2008 Imre Kaloz <Kaloz@openwrt.org>
-+ *
-+ * based on coyote-setup.c:
-+ * Copyright (C) 2003-2005 MontaVista Software, Inc.
-+ *
-+ * Author: Imre Kaloz <Kaloz@openwrt.org>
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/serial.h>
-+#include <linux/serial_8250.h>
-+
-+#include <asm/mach-types.h>
-+#include <asm/mach/arch.h>
-+#include <asm/mach/flash.h>
-+
-+static struct flash_platform_data sidewinder_flash_data = {
-+ .map_name = "cfi_probe",
-+ .width = 2,
-+};
-+
-+static struct resource sidewinder_flash_resource = {
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct platform_device sidewinder_flash = {
-+ .name = "IXP4XX-Flash",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = &sidewinder_flash_data,
-+ },
-+ .num_resources = 1,
-+ .resource = &sidewinder_flash_resource,
-+};
-+
-+static struct resource sidewinder_uart_resources[] = {
-+ {
-+ .start = IXP4XX_UART1_BASE_PHYS,
-+ .end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ {
-+ .start = IXP4XX_UART2_BASE_PHYS,
-+ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM,
-+ }
-+};
-+
-+static struct plat_serial8250_port sidewinder_uart_data[] = {
-+ {
-+ .mapbase = IXP4XX_UART1_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART1,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ {
-+ .mapbase = IXP4XX_UART2_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART2,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ { },
-+};
-+
-+static struct platform_device sidewinder_uart = {
-+ .name = "serial8250",
-+ .id = PLAT8250_DEV_PLATFORM,
-+ .dev = {
-+ .platform_data = sidewinder_uart_data,
-+ },
-+ .num_resources = ARRAY_SIZE(sidewinder_uart_resources),
-+ .resource = sidewinder_uart_resources,
-+};
-+
-+static struct eth_plat_info sidewinder_plat_eth[] = {
-+ {
-+ .phy = 5,
-+ .rxq = 3,
-+ .txreadyq = 20,
-+ }, {
-+ .phy = IXP4XX_ETH_PHY_MAX_ADDR,
-+ .phy_mask = 0x1e,
-+ .rxq = 4,
-+ .txreadyq = 21,
-+ }, {
-+ .phy = 31,
-+ .rxq = 2,
-+ .txreadyq = 19,
-+ }
-+};
-+
-+static struct platform_device sidewinder_eth[] = {
-+ {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEB,
-+ .dev.platform_data = sidewinder_plat_eth,
-+ }, {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEC,
-+ .dev.platform_data = sidewinder_plat_eth + 1,
-+ }, {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEA,
-+ .dev.platform_data = sidewinder_plat_eth + 2,
-+ }
-+};
-+
-+static struct platform_device *sidewinder_devices[] __initdata = {
-+ &sidewinder_flash,
-+ &sidewinder_uart,
-+ &sidewinder_eth[0],
-+ &sidewinder_eth[1],
-+ &sidewinder_eth[2],
-+};
-+
-+static void __init sidewinder_init(void)
-+{
-+ ixp4xx_sys_init();
-+
-+ sidewinder_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-+ sidewinder_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_64M - 1;
-+
-+ *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
-+ *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
-+
-+ platform_add_devices(sidewinder_devices, ARRAY_SIZE(sidewinder_devices));
-+}
-+
-+MACHINE_START(SIDEWINDER, "ADI Engineering Sidewinder")
-+ /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
-+ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
-+ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
-+ .map_io = ixp4xx_map_io,
-+ .init_irq = ixp4xx_init_irq,
-+ .timer = &ixp4xx_timer,
-+ .boot_params = 0x0100,
-+ .init_machine = sidewinder_init,
-+MACHINE_END
diff --git a/target/linux/ixp4xx/patches-2.6.35/116-sidewinder_fis_location.patch b/target/linux/ixp4xx/patches-2.6.35/116-sidewinder_fis_location.patch
deleted file mode 100644
index 1d0a98398..000000000
--- a/target/linux/ixp4xx/patches-2.6.35/116-sidewinder_fis_location.patch
+++ /dev/null
@@ -1,30 +0,0 @@
---- a/drivers/mtd/redboot.c
-+++ b/drivers/mtd/redboot.c
-@@ -13,6 +13,8 @@
-
- #define BOARD_CONFIG_PART "boardconfig"
-
-+#include <asm/mach-types.h>
-+
- struct fis_image_desc {
- unsigned char name[16]; // Null terminated name
- uint32_t flash_base; // Address within FLASH of image
-@@ -30,7 +32,8 @@ struct fis_list {
- struct fis_list *next;
- };
-
--static int directory = CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK;
-+int directory = CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK;
-+
- module_param(directory, int, 0);
-
- static inline int redboot_checksum(struct fis_image_desc *img)
-@@ -59,6 +62,8 @@ static int parse_redboot_partitions(stru
- #ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED
- static char nullstring[] = "unallocated";
- #endif
-+ if (machine_is_sidewinder())
-+ directory = -5;
-
- if ( directory < 0 ) {
- offset = master->size + directory * master->erasesize;
diff --git a/target/linux/ixp4xx/patches-2.6.35/120-compex_support.patch b/target/linux/ixp4xx/patches-2.6.35/120-compex_support.patch
deleted file mode 100644
index 3a26afec6..000000000
--- a/target/linux/ixp4xx/patches-2.6.35/120-compex_support.patch
+++ /dev/null
@@ -1,212 +0,0 @@
-From 24025a2dcf1248079dd3019fac6ed955252d277f Mon Sep 17 00:00:00 2001
-From: Imre Kaloz <kaloz@openwrt.org>
-Date: Mon, 14 Jul 2008 21:56:34 +0200
-Subject: [PATCH] Add support for the Compex WP18 / NP18A boards
-
-Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
----
- arch/arm/mach-ixp4xx/Kconfig | 8 ++
- arch/arm/mach-ixp4xx/Makefile | 2 +
- arch/arm/mach-ixp4xx/compex-setup.c | 136 +++++++++++++++++++++++++++++++++++
- arch/arm/mach-ixp4xx/ixdp425-pci.c | 3 +-
- arch/arm/tools/mach-types | 2 +-
- 5 files changed, 149 insertions(+), 2 deletions(-)
- create mode 100644 arch/arm/mach-ixp4xx/compex-setup.c
-
---- a/arch/arm/mach-ixp4xx/Kconfig
-+++ b/arch/arm/mach-ixp4xx/Kconfig
-@@ -89,6 +89,14 @@ config MACH_SIDEWINDER
- Engineering Sidewinder board. For more information on this
- platform, see http://www.adiengineering.com
-
-+config MACH_COMPEX
-+ bool "Compex WP18 / NP18A"
-+ select PCI
-+ help
-+ Say 'Y' here if you want your kernel to support Compex'
-+ WP18 or NP18A boards. For more information on this
-+ platform, see http://www.compex.com.sg/home/OEM/product_ap.htm
-+
- config ARCH_IXDP425
- bool "IXDP425"
- help
---- a/arch/arm/mach-ixp4xx/Makefile
-+++ b/arch/arm/mach-ixp4xx/Makefile
-@@ -19,6 +19,7 @@ obj-pci-$(CONFIG_MACH_WG302V2) += wg302
- obj-pci-$(CONFIG_MACH_FSG) += fsg-pci.o
- obj-pci-$(CONFIG_MACH_PRONGHORN) += pronghorn-pci.o
- obj-pci-$(CONFIG_MACH_SIDEWINDER) += sidewinder-pci.o
-+obj-pci-$(CONFIG_MACH_COMPEX) += ixdp425-pci.o
-
- obj-y += common.o
-
-@@ -37,6 +38,7 @@ obj-$(CONFIG_MACH_FSG) += fsg-setup.o
- obj-$(CONFIG_MACH_GORAMO_MLR) += goramo_mlr.o
- obj-$(CONFIG_MACH_PRONGHORN) += pronghorn-setup.o
- obj-$(CONFIG_MACH_SIDEWINDER) += sidewinder-setup.o
-+obj-$(CONFIG_MACH_COMPEX) += compex-setup.o
-
- obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o
- obj-$(CONFIG_IXP4XX_QMGR) += ixp4xx_qmgr.o
---- /dev/null
-+++ b/arch/arm/mach-ixp4xx/compex-setup.c
-@@ -0,0 +1,136 @@
-+/*
-+ * arch/arm/mach-ixp4xx/compex-setup.c
-+ *
-+ * Compex WP18 / NP18A board-setup
-+ *
-+ * Copyright (C) 2008 Imre Kaloz <Kaloz@openwrt.org>
-+ *
-+ * based on coyote-setup.c:
-+ * Copyright (C) 2003-2005 MontaVista Software, Inc.
-+ *
-+ * Author: Imre Kaloz <Kaloz@openwrt.org>
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/serial.h>
-+#include <linux/serial_8250.h>
-+
-+#include <asm/mach-types.h>
-+#include <asm/mach/arch.h>
-+#include <asm/mach/flash.h>
-+
-+static struct flash_platform_data compex_flash_data = {
-+ .map_name = "cfi_probe",
-+ .width = 2,
-+};
-+
-+static struct resource compex_flash_resource = {
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct platform_device compex_flash = {
-+ .name = "IXP4XX-Flash",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = &compex_flash_data,
-+ },
-+ .num_resources = 1,
-+ .resource = &compex_flash_resource,
-+};
-+
-+static struct resource compex_uart_resources[] = {
-+ {
-+ .start = IXP4XX_UART1_BASE_PHYS,
-+ .end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM
-+ },
-+ {
-+ .start = IXP4XX_UART2_BASE_PHYS,
-+ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM
-+ }
-+};
-+
-+static struct plat_serial8250_port compex_uart_data[] = {
-+ {
-+ .mapbase = IXP4XX_UART1_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART1,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ {
-+ .mapbase = IXP4XX_UART2_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART2,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ { },
-+};
-+
-+static struct platform_device compex_uart = {
-+ .name = "serial8250",
-+ .id = PLAT8250_DEV_PLATFORM,
-+ .dev.platform_data = compex_uart_data,
-+ .num_resources = 2,
-+ .resource = compex_uart_resources,
-+};
-+
-+static struct eth_plat_info compex_plat_eth[] = {
-+ {
-+ .phy = IXP4XX_ETH_PHY_MAX_ADDR,
-+ .phy_mask = 0xf0000,
-+ .rxq = 3,
-+ .txreadyq = 20,
-+ }, {
-+ .phy = 3,
-+ .rxq = 4,
-+ .txreadyq = 21,
-+ }
-+};
-+
-+static struct platform_device compex_eth[] = {
-+ {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEB,
-+ .dev.platform_data = compex_plat_eth,
-+ }, {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEC,
-+ .dev.platform_data = compex_plat_eth + 1,
-+ }
-+};
-+
-+static struct platform_device *compex_devices[] __initdata = {
-+ &compex_flash,
-+ &compex_uart,
-+ &compex_eth[0],
-+ &compex_eth[1],
-+};
-+
-+static void __init compex_init(void)
-+{
-+ ixp4xx_sys_init();
-+
-+ compex_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-+ compex_flash_resource.end =
-+ IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
-+
-+ platform_add_devices(compex_devices, ARRAY_SIZE(compex_devices));
-+}
-+
-+MACHINE_START(COMPEX, "Compex WP18 / NP18A")
-+ /* Maintainer: Imre Kaloz <Kaloz@openwrt.org> */
-+ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
-+ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
-+ .map_io = ixp4xx_map_io,
-+ .init_irq = ixp4xx_init_irq,
-+ .timer = &ixp4xx_timer,
-+ .boot_params = 0x0100,
-+ .init_machine = compex_init,
-+MACHINE_END
---- a/arch/arm/mach-ixp4xx/ixdp425-pci.c
-+++ b/arch/arm/mach-ixp4xx/ixdp425-pci.c
-@@ -70,7 +70,8 @@ struct hw_pci ixdp425_pci __initdata = {
- int __init ixdp425_pci_init(void)
- {
- if (machine_is_ixdp425() || machine_is_ixcdp1100() ||
-- machine_is_ixdp465() || machine_is_kixrp435())
-+ machine_is_ixdp465() || machine_is_kixrp435() ||
-+ machine_is_compex())
- pci_common_init(&ixdp425_pci);
- return 0;
- }
---- a/arch/arm/tools/mach-types
-+++ b/arch/arm/tools/mach-types
-@@ -1273,7 +1273,7 @@ oiab MACH_OIAB OIAB 1269
- smdk6400 MACH_SMDK6400 SMDK6400 1270
- nokia_n800 MACH_NOKIA_N800 NOKIA_N800 1271
- greenphone MACH_GREENPHONE GREENPHONE 1272
--compex42x MACH_COMPEXWP18 COMPEXWP18 1273
-+compex MACH_COMPEX COMPEX 1273
- xmate MACH_XMATE XMATE 1274
- energizer MACH_ENERGIZER ENERGIZER 1275
- ime1 MACH_IME1 IME1 1276
diff --git a/target/linux/ixp4xx/patches-2.6.35/130-wrt300nv2_support.patch b/target/linux/ixp4xx/patches-2.6.35/130-wrt300nv2_support.patch
deleted file mode 100644
index c184a6c6c..000000000
--- a/target/linux/ixp4xx/patches-2.6.35/130-wrt300nv2_support.patch
+++ /dev/null
@@ -1,225 +0,0 @@
---- a/arch/arm/mach-ixp4xx/Kconfig
-+++ b/arch/arm/mach-ixp4xx/Kconfig
-@@ -97,6 +97,14 @@ config MACH_COMPEX
- WP18 or NP18A boards. For more information on this
- platform, see http://www.compex.com.sg/home/OEM/product_ap.htm
-
-+config MACH_WRT300NV2
-+ bool "Linksys WRT300N v2"
-+ select PCI
-+ help
-+ Say 'Y' here if you want your kernel to support Linksys'
-+ WRT300N v2 router. For more information on this
-+ platform, see http://openwrt.org
-+
- config ARCH_IXDP425
- bool "IXDP425"
- help
---- a/arch/arm/mach-ixp4xx/Makefile
-+++ b/arch/arm/mach-ixp4xx/Makefile
-@@ -20,6 +20,7 @@ obj-pci-$(CONFIG_MACH_FSG) += fsg-pci.o
- obj-pci-$(CONFIG_MACH_PRONGHORN) += pronghorn-pci.o
- obj-pci-$(CONFIG_MACH_SIDEWINDER) += sidewinder-pci.o
- obj-pci-$(CONFIG_MACH_COMPEX) += ixdp425-pci.o
-+obj-pci-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-pci.o
-
- obj-y += common.o
-
-@@ -39,6 +40,7 @@ obj-$(CONFIG_MACH_GORAMO_MLR) += goramo_
- obj-$(CONFIG_MACH_PRONGHORN) += pronghorn-setup.o
- obj-$(CONFIG_MACH_SIDEWINDER) += sidewinder-setup.o
- obj-$(CONFIG_MACH_COMPEX) += compex-setup.o
-+obj-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-setup.o
-
- obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o
- obj-$(CONFIG_IXP4XX_QMGR) += ixp4xx_qmgr.o
---- /dev/null
-+++ b/arch/arm/mach-ixp4xx/wrt300nv2-pci.c
-@@ -0,0 +1,65 @@
-+/*
-+ * arch/arch/mach-ixp4xx/wrt300nv2-pci.c
-+ *
-+ * PCI setup routines for Linksys WRT300N v2
-+ *
-+ * Copyright (C) 2007 Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * based on coyote-pci.c:
-+ * Copyright (C) 2002 Jungo Software Technologies.
-+ * Copyright (C) 2003 MontaVista Softwrae, Inc.
-+ *
-+ * Maintainer: Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/pci.h>
-+#include <linux/init.h>
-+#include <linux/irq.h>
-+
-+#include <asm/mach-types.h>
-+#include <mach/hardware.h>
-+#include <asm/irq.h>
-+
-+#include <asm/mach/pci.h>
-+
-+extern void ixp4xx_pci_preinit(void);
-+extern int ixp4xx_setup(int nr, struct pci_sys_data *sys);
-+extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys);
-+
-+void __init wrt300nv2_pci_preinit(void)
-+{
-+ set_irq_type(IRQ_IXP4XX_GPIO8, IRQ_TYPE_LEVEL_LOW);
-+
-+ ixp4xx_pci_preinit();
-+}
-+
-+static int __init wrt300nv2_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+ if (slot == 1)
-+ return IRQ_IXP4XX_GPIO8;
-+ else return -1;
-+}
-+
-+struct hw_pci wrt300nv2_pci __initdata = {
-+ .nr_controllers = 1,
-+ .preinit = wrt300nv2_pci_preinit,
-+ .swizzle = pci_std_swizzle,
-+ .setup = ixp4xx_setup,
-+ .scan = ixp4xx_scan_bus,
-+ .map_irq = wrt300nv2_map_irq,
-+};
-+
-+int __init wrt300nv2_pci_init(void)
-+{
-+ if (machine_is_wrt300nv2())
-+ pci_common_init(&wrt300nv2_pci);
-+ return 0;
-+}
-+
-+subsys_initcall(wrt300nv2_pci_init);
---- /dev/null
-+++ b/arch/arm/mach-ixp4xx/wrt300nv2-setup.c
-@@ -0,0 +1,108 @@
-+/*
-+ * arch/arm/mach-ixp4xx/wrt300nv2-setup.c
-+ *
-+ * Board setup for the Linksys WRT300N v2
-+ *
-+ * Copyright (C) 2007 Imre Kaloz <Kaloz@openwrt.org>
-+ *
-+ * based on coyote-setup.c:
-+ * Copyright (C) 2003-2005 MontaVista Software, Inc.
-+ *
-+ * Author: Imre Kaloz <Kaloz@openwrt.org>
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/device.h>
-+#include <linux/serial.h>
-+#include <linux/tty.h>
-+#include <linux/serial_8250.h>
-+#include <linux/slab.h>
-+
-+#include <asm/types.h>
-+#include <asm/setup.h>
-+#include <asm/memory.h>
-+#include <mach/hardware.h>
-+#include <asm/irq.h>
-+#include <asm/mach-types.h>
-+#include <asm/mach/arch.h>
-+#include <asm/mach/flash.h>
-+
-+static struct flash_platform_data wrt300nv2_flash_data = {
-+ .map_name = "cfi_probe",
-+ .width = 2,
-+};
-+
-+static struct resource wrt300nv2_flash_resource = {
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct platform_device wrt300nv2_flash = {
-+ .name = "IXP4XX-Flash",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = &wrt300nv2_flash_data,
-+ },
-+ .num_resources = 1,
-+ .resource = &wrt300nv2_flash_resource,
-+};
-+
-+static struct resource wrt300nv2_uart_resource = {
-+ .start = IXP4XX_UART2_BASE_PHYS,
-+ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct plat_serial8250_port wrt300nv2_uart_data[] = {
-+ {
-+ .mapbase = IXP4XX_UART2_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART2,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ { },
-+};
-+
-+static struct platform_device wrt300nv2_uart = {
-+ .name = "serial8250",
-+ .id = PLAT8250_DEV_PLATFORM,
-+ .dev = {
-+ .platform_data = wrt300nv2_uart_data,
-+ },
-+ .num_resources = 1,
-+ .resource = &wrt300nv2_uart_resource,
-+};
-+
-+static struct platform_device *wrt300nv2_devices[] __initdata = {
-+ &wrt300nv2_flash,
-+ &wrt300nv2_uart
-+};
-+
-+static void __init wrt300nv2_init(void)
-+{
-+ ixp4xx_sys_init();
-+
-+ wrt300nv2_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-+ wrt300nv2_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
-+
-+ *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
-+ *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
-+
-+ platform_add_devices(wrt300nv2_devices, ARRAY_SIZE(wrt300nv2_devices));
-+}
-+
-+#ifdef CONFIG_MACH_WRT300NV2
-+MACHINE_START(WRT300NV2, "Linksys WRT300N v2")
-+ /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
-+ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
-+ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
-+ .map_io = ixp4xx_map_io,
-+ .init_irq = ixp4xx_init_irq,
-+ .timer = &ixp4xx_timer,
-+ .boot_params = 0x0100,
-+ .init_machine = wrt300nv2_init,
-+MACHINE_END
-+#endif
---- a/arch/arm/mach-ixp4xx/include/mach/uncompress.h
-+++ b/arch/arm/mach-ixp4xx/include/mach/uncompress.h
-@@ -42,7 +42,7 @@ static __inline__ void __arch_decomp_set
- */
- if (machine_is_adi_coyote() || machine_is_gtwx5715() ||
- machine_is_gateway7001() || machine_is_wg302v2() ||
-- machine_is_pronghorn() || machine_is_pronghorn_metro())
-+ machine_is_pronghorn() || machine_is_pronghorn_metro() || machine_is_wrt300nv2())
- uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS;
- else
- uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;
diff --git a/target/linux/ixp4xx/patches-2.6.35/131-wrt300nv2_mac_plat_info.patch b/target/linux/ixp4xx/patches-2.6.35/131-wrt300nv2_mac_plat_info.patch
deleted file mode 100644
index 3ab68c4f3..000000000
--- a/target/linux/ixp4xx/patches-2.6.35/131-wrt300nv2_mac_plat_info.patch
+++ /dev/null
@@ -1,40 +0,0 @@
---- a/arch/arm/mach-ixp4xx/wrt300nv2-setup.c
-+++ b/arch/arm/mach-ixp4xx/wrt300nv2-setup.c
-@@ -76,9 +76,36 @@ static struct platform_device wrt300nv2_
- .resource = &wrt300nv2_uart_resource,
- };
-
-+/* Built-in 10/100 Ethernet MAC interfaces */
-+static struct eth_plat_info wrt300nv2_plat_eth[] = {
-+ {
-+ .phy = -1,
-+ .rxq = 3,
-+ .txreadyq = 20,
-+ }, {
-+ .phy = 1,
-+ .rxq = 4,
-+ .txreadyq = 21,
-+ }
-+};
-+
-+static struct platform_device wrt300nv2_eth[] = {
-+ {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEB,
-+ .dev.platform_data = wrt300nv2_plat_eth,
-+ }, {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEC,
-+ .dev.platform_data = wrt300nv2_plat_eth + 1,
-+ }
-+};
-+
- static struct platform_device *wrt300nv2_devices[] __initdata = {
- &wrt300nv2_flash,
-- &wrt300nv2_uart
-+ &wrt300nv2_uart,
-+ &wrt300nv2_eth[0],
-+ &wrt300nv2_eth[1],
- };
-
- static void __init wrt300nv2_init(void)
diff --git a/target/linux/ixp4xx/patches-2.6.35/132-wrt300nv2_mac_fix.patch b/target/linux/ixp4xx/patches-2.6.35/132-wrt300nv2_mac_fix.patch
deleted file mode 100644
index cc891e248..000000000
--- a/target/linux/ixp4xx/patches-2.6.35/132-wrt300nv2_mac_fix.patch
+++ /dev/null
@@ -1,71 +0,0 @@
---- a/arch/arm/mach-ixp4xx/wrt300nv2-setup.c
-+++ b/arch/arm/mach-ixp4xx/wrt300nv2-setup.c
-@@ -3,6 +3,7 @@
- *
- * Board setup for the Linksys WRT300N v2
- *
-+ * Copyright (C) 2010 Alexandros C. Couloumbis <alex@ozo.com>
- * Copyright (C) 2007 Imre Kaloz <Kaloz@openwrt.org>
- *
- * based on coyote-setup.c:
-@@ -18,6 +19,7 @@
- #include <linux/tty.h>
- #include <linux/serial_8250.h>
- #include <linux/slab.h>
-+#include <linux/etherdevice.h>
-
- #include <asm/types.h>
- #include <asm/setup.h>
-@@ -79,7 +81,8 @@ static struct platform_device wrt300nv2_
- /* Built-in 10/100 Ethernet MAC interfaces */
- static struct eth_plat_info wrt300nv2_plat_eth[] = {
- {
-- .phy = -1,
-+ .phy = IXP4XX_ETH_PHY_MAX_ADDR,
-+ .phy_mask = 0x0F0000,
- .rxq = 3,
- .txreadyq = 20,
- }, {
-@@ -111,6 +114,9 @@ static struct platform_device *wrt300nv2
- static void __init wrt300nv2_init(void)
- {
- ixp4xx_sys_init();
-+ uint8_t __iomem *f;
-+ int offset = 0;
-+ int i;
-
- wrt300nv2_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
- wrt300nv2_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
-@@ -119,6 +125,32 @@ static void __init wrt300nv2_init(void)
- *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
-
- platform_add_devices(wrt300nv2_devices, ARRAY_SIZE(wrt300nv2_devices));
-+
-+ f = ioremap(IXP4XX_EXP_BUS_BASE(0), 0x60000);
-+
-+ if (f) {
-+ for (i = 0; i < 6; i++) {
-+#ifdef __ARMEB__
-+ wrt300nv2_plat_eth[0].hwaddr[i] = readb(f + 0x5FFA0 + i);
-+ if (i == 5)
-+ offset = 1;
-+ wrt300nv2_plat_eth[1].hwaddr[i] = (wrt300nv2_plat_eth[0].hwaddr[i] + offset);
-+#else
-+ wrt300nv2_plat_eth[0].hwaddr[i] = readb(f + 0x5FFA0 + (i^3));
-+ if (i == 5)
-+ offset = 1;
-+ wrt300nv2_plat_eth[1].hwaddr[i] = (wrt300nv2_plat_eth[0].hwaddr[i] + offset);
-+#endif
-+ }
-+ iounmap(f);
-+ }
-+
-+ if (!(is_valid_ether_addr(wrt300nv2_plat_eth[0].hwaddr)))
-+ random_ether_addr(wrt300nv2_plat_eth[0].hwaddr);
-+ if (!(is_valid_ether_addr(wrt300nv2_plat_eth[1].hwaddr))) {
-+ memcpy(wrt300nv2_plat_eth[1].hwaddr, wrt300nv2_plat_eth[0].hwaddr, ETH_ALEN);
-+ wrt300nv2_plat_eth[1].hwaddr[5] = (wrt300nv2_plat_eth[0].hwaddr[5] + 1);
-+ }
- }
-
- #ifdef CONFIG_MACH_WRT300NV2
diff --git a/target/linux/ixp4xx/patches-2.6.35/150-lanready_ap1000_support.patch b/target/linux/ixp4xx/patches-2.6.35/150-lanready_ap1000_support.patch
deleted file mode 100644
index 1dd31e70e..000000000
--- a/target/linux/ixp4xx/patches-2.6.35/150-lanready_ap1000_support.patch
+++ /dev/null
@@ -1,200 +0,0 @@
---- /dev/null
-+++ b/arch/arm/mach-ixp4xx/ap1000-setup.c
-@@ -0,0 +1,151 @@
-+/*
-+ * arch/arm/mach-ixp4xx/ap1000-setup.c
-+ *
-+ * Lanready AP-1000
-+ *
-+ * Copyright (C) 2007 Imre Kaloz <Kaloz@openwrt.org>
-+ *
-+ * based on ixdp425-setup.c:
-+ * Copyright (C) 2003-2005 MontaVista Software, Inc.
-+ *
-+ * Author: Imre Kaloz <Kaloz@openwrt.org>
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/device.h>
-+#include <linux/serial.h>
-+#include <linux/tty.h>
-+#include <linux/serial_8250.h>
-+#include <linux/slab.h>
-+
-+#include <asm/types.h>
-+#include <asm/setup.h>
-+#include <asm/memory.h>
-+#include <mach/hardware.h>
-+#include <asm/mach-types.h>
-+#include <asm/irq.h>
-+#include <asm/mach/arch.h>
-+#include <asm/mach/flash.h>
-+
-+static struct flash_platform_data ap1000_flash_data = {
-+ .map_name = "cfi_probe",
-+ .width = 2,
-+};
-+
-+static struct resource ap1000_flash_resource = {
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct platform_device ap1000_flash = {
-+ .name = "IXP4XX-Flash",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = &ap1000_flash_data,
-+ },
-+ .num_resources = 1,
-+ .resource = &ap1000_flash_resource,
-+};
-+
-+static struct resource ap1000_uart_resources[] = {
-+ {
-+ .start = IXP4XX_UART1_BASE_PHYS,
-+ .end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM
-+ },
-+ {
-+ .start = IXP4XX_UART2_BASE_PHYS,
-+ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM
-+ }
-+};
-+
-+static struct plat_serial8250_port ap1000_uart_data[] = {
-+ {
-+ .mapbase = IXP4XX_UART1_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART1,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ {
-+ .mapbase = IXP4XX_UART2_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART2,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ { },
-+};
-+
-+static struct platform_device ap1000_uart = {
-+ .name = "serial8250",
-+ .id = PLAT8250_DEV_PLATFORM,
-+ .dev.platform_data = ap1000_uart_data,
-+ .num_resources = 2,
-+ .resource = ap1000_uart_resources
-+};
-+
-+static struct platform_device *ap1000_devices[] __initdata = {
-+ &ap1000_flash,
-+ &ap1000_uart
-+};
-+
-+static char ap1000_mem_fixup[] __initdata = "mem=64M ";
-+
-+static void __init ap1000_fixup(struct machine_desc *desc,
-+ struct tag *tags, char **cmdline, struct meminfo *mi)
-+
-+{
-+ struct tag *t = tags;
-+ char *p = *cmdline;
-+
-+ /* Find the end of the tags table, taking note of any cmdline tag. */
-+ for (; t->hdr.size; t = tag_next(t)) {
-+ if (t->hdr.tag == ATAG_CMDLINE) {
-+ p = t->u.cmdline.cmdline;
-+ }
-+ }
-+
-+ /* Overwrite the end of the table with a new cmdline tag. */
-+ t->hdr.tag = ATAG_CMDLINE;
-+ t->hdr.size = (sizeof (struct tag_header) +
-+ strlen(ap1000_mem_fixup) + strlen(p) + 1 + 4) >> 2;
-+ strlcpy(t->u.cmdline.cmdline, ap1000_mem_fixup, COMMAND_LINE_SIZE);
-+ strlcpy(t->u.cmdline.cmdline + strlen(ap1000_mem_fixup), p,
-+ COMMAND_LINE_SIZE - strlen(ap1000_mem_fixup));
-+
-+ /* Terminate the table. */
-+ t = tag_next(t);
-+ t->hdr.tag = ATAG_NONE;
-+ t->hdr.size = 0;
-+}
-+
-+static void __init ap1000_init(void)
-+{
-+ ixp4xx_sys_init();
-+
-+ ap1000_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-+ ap1000_flash_resource.end =
-+ IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
-+
-+ platform_add_devices(ap1000_devices, ARRAY_SIZE(ap1000_devices));
-+}
-+
-+#ifdef CONFIG_MACH_AP1000
-+MACHINE_START(AP1000, "Lanready AP-1000")
-+ /* Maintainer: Imre Kaloz <Kaloz@openwrt.org> */
-+ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
-+ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
-+ .fixup = ap1000_fixup,
-+ .map_io = ixp4xx_map_io,
-+ .init_irq = ixp4xx_init_irq,
-+ .timer = &ixp4xx_timer,
-+ .boot_params = 0x0100,
-+ .init_machine = ap1000_init,
-+MACHINE_END
-+#endif
---- a/arch/arm/mach-ixp4xx/ixdp425-pci.c
-+++ b/arch/arm/mach-ixp4xx/ixdp425-pci.c
-@@ -71,7 +71,7 @@ int __init ixdp425_pci_init(void)
- {
- if (machine_is_ixdp425() || machine_is_ixcdp1100() ||
- machine_is_ixdp465() || machine_is_kixrp435() ||
-- machine_is_compex())
-+ machine_is_compex() || machine_is_ap1000())
- pci_common_init(&ixdp425_pci);
- return 0;
- }
---- a/arch/arm/mach-ixp4xx/Kconfig
-+++ b/arch/arm/mach-ixp4xx/Kconfig
-@@ -105,6 +105,14 @@ config MACH_WRT300NV2
- WRT300N v2 router. For more information on this
- platform, see http://openwrt.org
-
-+config MACH_AP1000
-+ bool "Lanready AP-1000"
-+ select PCI
-+ help
-+ Say 'Y' here if you want your kernel to support Lanready's
-+ AP1000 board. For more information on this
-+ platform, see http://openwrt.org
-+
- config ARCH_IXDP425
- bool "IXDP425"
- help
---- a/arch/arm/mach-ixp4xx/Makefile
-+++ b/arch/arm/mach-ixp4xx/Makefile
-@@ -21,6 +21,7 @@ obj-pci-$(CONFIG_MACH_PRONGHORN) += pron
- obj-pci-$(CONFIG_MACH_SIDEWINDER) += sidewinder-pci.o
- obj-pci-$(CONFIG_MACH_COMPEX) += ixdp425-pci.o
- obj-pci-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-pci.o
-+obj-pci-$(CONFIG_MACH_AP1000) += ixdp425-pci.o
-
- obj-y += common.o
-
-@@ -41,6 +42,7 @@ obj-$(CONFIG_MACH_PRONGHORN) += pronghor
- obj-$(CONFIG_MACH_SIDEWINDER) += sidewinder-setup.o
- obj-$(CONFIG_MACH_COMPEX) += compex-setup.o
- obj-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-setup.o
-+obj-$(CONFIG_MACH_AP1000) += ap1000-setup.o
-
- obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o
- obj-$(CONFIG_IXP4XX_QMGR) += ixp4xx_qmgr.o
diff --git a/target/linux/ixp4xx/patches-2.6.35/151-lanready_ap1000_mac_plat_info.patch b/target/linux/ixp4xx/patches-2.6.35/151-lanready_ap1000_mac_plat_info.patch
deleted file mode 100644
index a1214d567..000000000
--- a/target/linux/ixp4xx/patches-2.6.35/151-lanready_ap1000_mac_plat_info.patch
+++ /dev/null
@@ -1,41 +0,0 @@
---- a/arch/arm/mach-ixp4xx/ap1000-setup.c
-+++ b/arch/arm/mach-ixp4xx/ap1000-setup.c
-@@ -90,9 +90,37 @@ static struct platform_device ap1000_uar
- .resource = ap1000_uart_resources
- };
-
-+/* Built-in 10/100 Ethernet MAC interfaces */
-+static struct eth_plat_info ap1000_plat_eth[] = {
-+ {
-+ .phy = IXP4XX_ETH_PHY_MAX_ADDR,
-+ .phy_mask = 0x1e,
-+ .rxq = 3,
-+ .txreadyq = 20,
-+ }, {
-+ .phy = 5,
-+ .rxq = 4,
-+ .txreadyq = 21,
-+ }
-+};
-+
-+static struct platform_device ap1000_eth[] = {
-+ {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEB,
-+ .dev.platform_data = ap1000_plat_eth,
-+ }, {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEC,
-+ .dev.platform_data = ap1000_plat_eth + 1,
-+ }
-+};
-+
- static struct platform_device *ap1000_devices[] __initdata = {
- &ap1000_flash,
-- &ap1000_uart
-+ &ap1000_uart,
-+ &ap1000_eth[0],
-+ &ap1000_eth[1],
- };
-
- static char ap1000_mem_fixup[] __initdata = "mem=64M ";
diff --git a/target/linux/ixp4xx/patches-2.6.35/162-wg302v1_mem_fixup.patch b/target/linux/ixp4xx/patches-2.6.35/162-wg302v1_mem_fixup.patch
deleted file mode 100644
index 684db4475..000000000
--- a/target/linux/ixp4xx/patches-2.6.35/162-wg302v1_mem_fixup.patch
+++ /dev/null
@@ -1,47 +0,0 @@
---- a/arch/arm/mach-ixp4xx/wg302v1-setup.c
-+++ b/arch/arm/mach-ixp4xx/wg302v1-setup.c
-@@ -115,6 +115,36 @@ static struct platform_device *wg302v1_d
- &wg302v1_eth[0],
- };
-
-+static char wg302v1_mem_fixup[] __initdata = "mem=32M ";
-+
-+static void __init wg302v1_fixup(struct machine_desc *desc,
-+ struct tag *tags, char **cmdline, struct meminfo *mi)
-+
-+{
-+ struct tag *t = tags;
-+ char *p = *cmdline;
-+
-+ /* Find the end of the tags table, taking note of any cmdline tag. */
-+ for (; t->hdr.size; t = tag_next(t)) {
-+ if (t->hdr.tag == ATAG_CMDLINE) {
-+ p = t->u.cmdline.cmdline;
-+ }
-+ }
-+
-+ /* Overwrite the end of the table with a new cmdline tag. */
-+ t->hdr.tag = ATAG_CMDLINE;
-+ t->hdr.size = (sizeof (struct tag_header) +
-+ strlen(wg302v1_mem_fixup) + strlen(p) + 1 + 4) >> 2;
-+ strlcpy(t->u.cmdline.cmdline, wg302v1_mem_fixup, COMMAND_LINE_SIZE);
-+ strlcpy(t->u.cmdline.cmdline + strlen(wg302v1_mem_fixup), p,
-+ COMMAND_LINE_SIZE - strlen(wg302v1_mem_fixup));
-+
-+ /* Terminate the table. */
-+ t = tag_next(t);
-+ t->hdr.tag = ATAG_NONE;
-+ t->hdr.size = 0;
-+}
-+
- static void __init wg302v1_init(void)
- {
- ixp4xx_sys_init();
-@@ -133,6 +163,7 @@ MACHINE_START(WG302V1, "Netgear WG302 v1
- /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
- .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
- .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
-+ .fixup = wg302v1_fixup,
- .map_io = ixp4xx_map_io,
- .init_irq = ixp4xx_init_irq,
- .timer = &ixp4xx_timer,
diff --git a/target/linux/ixp4xx/patches-2.6.35/170-ixdpg425_mac_plat_info.patch b/target/linux/ixp4xx/patches-2.6.35/170-ixdpg425_mac_plat_info.patch
deleted file mode 100644
index 279f4c65f..000000000
--- a/target/linux/ixp4xx/patches-2.6.35/170-ixdpg425_mac_plat_info.patch
+++ /dev/null
@@ -1,41 +0,0 @@
---- a/arch/arm/mach-ixp4xx/coyote-setup.c
-+++ b/arch/arm/mach-ixp4xx/coyote-setup.c
-@@ -82,9 +82,37 @@ static struct platform_device coyote_uar
- .resource = &coyote_uart_resource,
- };
-
-+/* Built-in 10/100 Ethernet MAC interfaces */
-+static struct eth_plat_info ixdpg425_plat_eth[] = {
-+ {
-+ .phy = 5,
-+ .rxq = 3,
-+ .txreadyq = 20,
-+ }, {
-+ .phy = 4,
-+ .rxq = 4,
-+ .txreadyq = 21,
-+ }
-+};
-+
-+static struct platform_device ixdpg425_eth[] = {
-+ {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEB,
-+ .dev.platform_data = ixdpg425_plat_eth,
-+ }, {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEC,
-+ .dev.platform_data = ixdpg425_plat_eth + 1,
-+ }
-+};
-+
-+
- static struct platform_device *coyote_devices[] __initdata = {
- &coyote_flash,
-- &coyote_uart
-+ &coyote_uart,
-+ &ixdpg425_eth[0],
-+ &ixdpg425_eth[1],
- };
-
- static void __init coyote_init(void)
diff --git a/target/linux/ixp4xx/patches-2.6.35/180-tw5334_support.patch b/target/linux/ixp4xx/patches-2.6.35/180-tw5334_support.patch
deleted file mode 100644
index 6370c9983..000000000
--- a/target/linux/ixp4xx/patches-2.6.35/180-tw5334_support.patch
+++ /dev/null
@@ -1,284 +0,0 @@
---- a/arch/arm/mach-ixp4xx/Kconfig
-+++ b/arch/arm/mach-ixp4xx/Kconfig
-@@ -164,6 +164,14 @@ config ARCH_PRPMC1100
- PrPCM1100 Processor Mezanine Module. For more information on
- this platform, see <file:Documentation/arm/IXP4xx>.
-
-+config MACH_TW5334
-+ bool "Titan Wireless TW-533-4"
-+ select PCI
-+ help
-+ Say 'Y' here if you want your kernel to support the Titan
-+ Wireless TW533-4. For more information on this platform,
-+ see http://openwrt.org
-+
- config MACH_NAS100D
- bool
- prompt "NAS100D"
---- a/arch/arm/mach-ixp4xx/Makefile
-+++ b/arch/arm/mach-ixp4xx/Makefile
-@@ -22,6 +22,7 @@ obj-pci-$(CONFIG_MACH_SIDEWINDER) += sid
- obj-pci-$(CONFIG_MACH_COMPEX) += ixdp425-pci.o
- obj-pci-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-pci.o
- obj-pci-$(CONFIG_MACH_AP1000) += ixdp425-pci.o
-+obj-pci-$(CONFIG_MACH_TW5334) += tw5334-pci.o
-
- obj-y += common.o
-
-@@ -43,6 +44,7 @@ obj-$(CONFIG_MACH_SIDEWINDER) += sidewin
- obj-$(CONFIG_MACH_COMPEX) += compex-setup.o
- obj-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-setup.o
- obj-$(CONFIG_MACH_AP1000) += ap1000-setup.o
-+obj-$(CONFIG_MACH_TW5334) += tw5334-setup.o
-
- obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o
- obj-$(CONFIG_IXP4XX_QMGR) += ixp4xx_qmgr.o
---- /dev/null
-+++ b/arch/arm/mach-ixp4xx/tw5334-setup.c
-@@ -0,0 +1,162 @@
-+/*
-+ * arch/arm/mach-ixp4xx/tw5334-setup.c
-+ *
-+ * Board setup for the Titan Wireless TW-533-4
-+ *
-+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * based on coyote-setup.c:
-+ * Copyright (C) 2003-2005 MontaVista Software, Inc.
-+ *
-+ * Author: Imre Kaloz <Kaloz@openwrt.org>
-+ */
-+
-+#include <linux/if_ether.h>
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/device.h>
-+#include <linux/serial.h>
-+#include <linux/tty.h>
-+#include <linux/serial_8250.h>
-+#include <linux/slab.h>
-+
-+#include <asm/types.h>
-+#include <asm/setup.h>
-+#include <asm/memory.h>
-+#include <mach/hardware.h>
-+#include <asm/irq.h>
-+#include <asm/mach-types.h>
-+#include <asm/mach/arch.h>
-+#include <asm/mach/flash.h>
-+
-+static struct flash_platform_data tw5334_flash_data = {
-+ .map_name = "cfi_probe",
-+ .width = 2,
-+};
-+
-+static struct resource tw5334_flash_resource = {
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct platform_device tw5334_flash = {
-+ .name = "IXP4XX-Flash",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = &tw5334_flash_data,
-+ },
-+ .num_resources = 1,
-+ .resource = &tw5334_flash_resource,
-+};
-+
-+static struct resource tw5334_uart_resource = {
-+ .start = IXP4XX_UART2_BASE_PHYS,
-+ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct plat_serial8250_port tw5334_uart_data[] = {
-+ {
-+ .mapbase = IXP4XX_UART2_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART2,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ { },
-+};
-+
-+static struct platform_device tw5334_uart = {
-+ .name = "serial8250",
-+ .id = PLAT8250_DEV_PLATFORM,
-+ .dev = {
-+ .platform_data = tw5334_uart_data,
-+ },
-+ .num_resources = 1,
-+ .resource = &tw5334_uart_resource,
-+};
-+
-+/* Built-in 10/100 Ethernet MAC interfaces */
-+static struct eth_plat_info tw5334_plat_eth[] = {
-+ {
-+ .phy = 0,
-+ .rxq = 3,
-+ .txreadyq = 20,
-+ }, {
-+ .phy = 1,
-+ .rxq = 4,
-+ .txreadyq = 21,
-+ }
-+};
-+
-+static struct platform_device tw5334_eth[] = {
-+ {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEB,
-+ .dev.platform_data = tw5334_plat_eth,
-+ }, {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEC,
-+ .dev.platform_data = tw5334_plat_eth + 1,
-+ }
-+};
-+
-+static struct platform_device *tw5334_devices[] __initdata = {
-+ &tw5334_flash,
-+ &tw5334_uart,
-+ &tw5334_eth[0],
-+ &tw5334_eth[1],
-+};
-+
-+static void __init tw5334_init(void)
-+{
-+ uint8_t __iomem *f;
-+ int i;
-+
-+ ixp4xx_sys_init();
-+
-+ tw5334_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-+ tw5334_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
-+
-+ *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
-+ *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
-+
-+ platform_add_devices(tw5334_devices, ARRAY_SIZE(tw5334_devices));
-+
-+ /*
-+ * Map in a portion of the flash and read the MAC addresses.
-+ * Since it is stored in BE in the flash itself, we need to
-+ * byteswap it if we're in LE mode.
-+ */
-+ f = ioremap(IXP4XX_EXP_BUS_BASE(0), 0x1000000);
-+ if (f) {
-+ for (i = 0; i < 6; i++)
-+#ifdef __ARMEB__
-+ tw5334_plat_eth[0].hwaddr[i] = readb(f + 0xFC0422 + i);
-+ tw5334_plat_eth[1].hwaddr[i] = readb(f + 0xFC043B + i);
-+#else
-+ tw5334_plat_eth[0].hwaddr[i] = readb(f + 0xFC0422 + (i^3));
-+ tw5334_plat_eth[1].hwaddr[i] = readb(f + 0xFC043B + (i^3));
-+#endif
-+ iounmap(f);
-+ }
-+
-+ printk(KERN_INFO "TW-533-4: Using MAC address %pM for port 0\n",
-+ tw5334_plat_eth[0].hwaddr);
-+ printk(KERN_INFO "TW-533-4: Using MAC address %pM for port 1\n",
-+ tw5334_plat_eth[1].hwaddr);
-+}
-+
-+#ifdef CONFIG_MACH_TW5334
-+MACHINE_START(TW5334, "Titan Wireless TW-533-4")
-+ /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
-+ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
-+ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
-+ .map_io = ixp4xx_map_io,
-+ .init_irq = ixp4xx_init_irq,
-+ .timer = &ixp4xx_timer,
-+ .boot_params = 0x0100,
-+ .init_machine = tw5334_init,
-+MACHINE_END
-+#endif
---- /dev/null
-+++ b/arch/arm/mach-ixp4xx/tw5334-pci.c
-@@ -0,0 +1,69 @@
-+/*
-+ * arch/arch/mach-ixp4xx/tw5334-pci.c
-+ *
-+ * PCI setup routines for the Titan Wireless TW-533-4
-+ *
-+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * based on coyote-pci.c:
-+ * Copyright (C) 2002 Jungo Software Technologies.
-+ * Copyright (C) 2003 MontaVista Softwrae, Inc.
-+ *
-+ * Maintainer: Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/pci.h>
-+#include <linux/init.h>
-+#include <linux/irq.h>
-+
-+#include <asm/mach-types.h>
-+#include <mach/hardware.h>
-+
-+#include <asm/mach/pci.h>
-+
-+void __init tw5334_pci_preinit(void)
-+{
-+ set_irq_type(IRQ_IXP4XX_GPIO6, IRQ_TYPE_LEVEL_LOW);
-+ set_irq_type(IRQ_IXP4XX_GPIO2, IRQ_TYPE_LEVEL_LOW);
-+ set_irq_type(IRQ_IXP4XX_GPIO1, IRQ_TYPE_LEVEL_LOW);
-+ set_irq_type(IRQ_IXP4XX_GPIO0, IRQ_TYPE_LEVEL_LOW);
-+
-+ ixp4xx_pci_preinit();
-+}
-+
-+static int __init tw5334_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+ if (slot == 12)
-+ return IRQ_IXP4XX_GPIO6;
-+ else if (slot == 13)
-+ return IRQ_IXP4XX_GPIO2;
-+ else if (slot == 14)
-+ return IRQ_IXP4XX_GPIO1;
-+ else if (slot == 15)
-+ return IRQ_IXP4XX_GPIO0;
-+ else return -1;
-+}
-+
-+struct hw_pci tw5334_pci __initdata = {
-+ .nr_controllers = 1,
-+ .preinit = tw5334_pci_preinit,
-+ .swizzle = pci_std_swizzle,
-+ .setup = ixp4xx_setup,
-+ .scan = ixp4xx_scan_bus,
-+ .map_irq = tw5334_map_irq,
-+};
-+
-+int __init tw5334_pci_init(void)
-+{
-+ if (machine_is_tw5334())
-+ pci_common_init(&tw5334_pci);
-+ return 0;
-+}
-+
-+subsys_initcall(tw5334_pci_init);
---- a/arch/arm/mach-ixp4xx/include/mach/uncompress.h
-+++ b/arch/arm/mach-ixp4xx/include/mach/uncompress.h
-@@ -42,7 +42,8 @@ static __inline__ void __arch_decomp_set
- */
- if (machine_is_adi_coyote() || machine_is_gtwx5715() ||
- machine_is_gateway7001() || machine_is_wg302v2() ||
-- machine_is_pronghorn() || machine_is_pronghorn_metro() || machine_is_wrt300nv2())
-+ machine_is_pronghorn() || machine_is_pronghorn_metro() || machine_is_wrt300nv2() ||
-+ machine_is_tw5334())
- uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS;
- else
- uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;
diff --git a/target/linux/ixp4xx/patches-2.6.35/185-mi424wr_support.patch b/target/linux/ixp4xx/patches-2.6.35/185-mi424wr_support.patch
deleted file mode 100644
index 1b8ee89c9..000000000
--- a/target/linux/ixp4xx/patches-2.6.35/185-mi424wr_support.patch
+++ /dev/null
@@ -1,465 +0,0 @@
---- /dev/null
-+++ b/arch/arm/mach-ixp4xx/mi424wr-pci.c
-@@ -0,0 +1,71 @@
-+/*
-+ * arch/arm/mach-ixp4xx/mi424wr-pci.c
-+ *
-+ * Actiontec MI424WR board-level PCI initialization
-+ *
-+ * Copyright (C) 2008 Jose Vasconcellos
-+ *
-+ * Maintainer: Jose Vasconcellos <jvasco@verizon.net>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/pci.h>
-+#include <linux/init.h>
-+#include <linux/irq.h>
-+
-+#include <asm/mach-types.h>
-+#include <asm/mach/pci.h>
-+
-+/* PCI controller GPIO to IRQ pin mappings
-+ * This information was obtained from Actiontec's GPL release.
-+ *
-+ * INTA INTB
-+ * SLOT 13 8 6
-+ * SLOT 14 7 8
-+ * SLOT 15 6 7
-+ */
-+
-+void __init mi424wr_pci_preinit(void)
-+{
-+ set_irq_type(IRQ_IXP4XX_GPIO6, IRQ_TYPE_LEVEL_LOW);
-+ set_irq_type(IRQ_IXP4XX_GPIO7, IRQ_TYPE_LEVEL_LOW);
-+ set_irq_type(IRQ_IXP4XX_GPIO8, IRQ_TYPE_LEVEL_LOW);
-+
-+ ixp4xx_pci_preinit();
-+}
-+
-+static int __init mi424wr_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+ if (slot == 13)
-+ return IRQ_IXP4XX_GPIO8;
-+ if (slot == 14)
-+ return IRQ_IXP4XX_GPIO7;
-+ if (slot == 15)
-+ return IRQ_IXP4XX_GPIO6;
-+
-+ return -1;
-+}
-+
-+struct hw_pci mi424wr_pci __initdata = {
-+ .nr_controllers = 1,
-+ .preinit = mi424wr_pci_preinit,
-+ .swizzle = pci_std_swizzle,
-+ .setup = ixp4xx_setup,
-+ .scan = ixp4xx_scan_bus,
-+ .map_irq = mi424wr_map_irq,
-+};
-+
-+int __init mi424wr_pci_init(void)
-+{
-+ if (machine_is_mi424wr())
-+ pci_common_init(&mi424wr_pci);
-+ return 0;
-+}
-+
-+subsys_initcall(mi424wr_pci_init);
-+
---- /dev/null
-+++ b/arch/arm/mach-ixp4xx/mi424wr-setup.c
-@@ -0,0 +1,344 @@
-+/*
-+ * arch/arm/mach-ixp4xx/mi424wr-setup.c
-+ *
-+ * Actiontec MI424-WR board setup
-+ * Copyright (c) 2008 Jose Vasconcellos
-+ *
-+ * Based on Gemtek GTWX5715 by
-+ * Copyright (C) 2004 George T. Joseph
-+ * Derived from Coyote
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version 2
-+ * of the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-+ *
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/device.h>
-+#include <linux/serial.h>
-+#include <linux/serial_8250.h>
-+#include <linux/types.h>
-+#include <linux/memory.h>
-+#include <linux/leds.h>
-+#include <linux/spi/spi_gpio_old.h>
-+
-+#include <asm/setup.h>
-+#include <asm/irq.h>
-+#include <asm/io.h>
-+#include <asm/mach-types.h>
-+#include <asm/mach/arch.h>
-+#include <asm/mach/flash.h>
-+
-+/*
-+ * GPIO 2,3,4 and 9 are hard wired to the Micrel/Kendin KS8995M Switch
-+ * and operate as an SPI type interface. The details of the interface
-+ * are available on Kendin/Micrel's web site.
-+ */
-+
-+#define MI424WR_KSSPI_SELECT 9
-+#define MI424WR_KSSPI_TXD 4
-+#define MI424WR_KSSPI_CLOCK 2
-+#define MI424WR_KSSPI_RXD 3
-+
-+/*
-+ * The "reset" button is wired to GPIO 10.
-+ * The GPIO is brought "low" when the button is pushed.
-+ */
-+
-+#define MI424WR_BUTTON_GPIO 10
-+#define MI424WR_BUTTON_IRQ IRQ_IXP4XX_GPIO10
-+
-+#define MI424WR_MOCA_WAN_LED 11
-+
-+/* Latch on CS1 - taken from Actiontec's 2.4 source code
-+ *
-+ * default latch value
-+ * 0 - power alarm led (red) 0 (off)
-+ * 1 - power led (green) 0 (off)
-+ * 2 - wireless led (green) 1 (off)
-+ * 3 - no internet led (red) 0 (off)
-+ * 4 - internet ok led (green) 0 (off)
-+ * 5 - moca LAN 0 (off)
-+ * 6 - WAN alarm led (red) 0 (off)
-+ * 7 - PCI reset 1 (not reset)
-+ * 8 - IP phone 1 led (green) 1 (off)
-+ * 9 - IP phone 2 led (green) 1 (off)
-+ * 10 - VOIP ready led (green) 1 (off)
-+ * 11 - PSTN relay 1 control 0 (PSTN)
-+ * 12 - PSTN relay 1 control 0 (PSTN)
-+ * 13 - N/A
-+ * 14 - N/A
-+ * 15 - N/A
-+ */
-+
-+#define MI424WR_LATCH_MASK 0x04
-+#define MI424WR_LATCH_DEFAULT 0x1f86
-+
-+#define MI424WR_LATCH_ALARM_LED 0x00
-+#define MI424WR_LATCH_POWER_LED 0x01
-+#define MI424WR_LATCH_WIRELESS_LED 0x02
-+#define MI424WR_LATCH_INET_DOWN_LED 0x03
-+#define MI424WR_LATCH_INET_OK_LED 0x04
-+#define MI424WR_LATCH_MOCA_LAN_LED 0x05
-+#define MI424WR_LATCH_WAN_ALARM_LED 0x06
-+#define MI424WR_LATCH_PCI_RESET 0x07
-+#define MI424WR_LATCH_PHONE1_LED 0x08
-+#define MI424WR_LATCH_PHONE2_LED 0x09
-+#define MI424WR_LATCH_VOIP_LED 0x10
-+#define MI424WR_LATCH_PSTN_RELAY1 0x11
-+#define MI424WR_LATCH_PSTN_RELAY2 0x12
-+
-+/* initialize CS1 to default timings, Intel style, 16-bit bus */
-+#define MI424WR_CS1_CONFIG 0x80000002
-+
-+/* Define both UARTs but they are not easily accessible.
-+ */
-+
-+static struct resource mi424wr_uart_resources[] = {
-+ {
-+ .start = IXP4XX_UART1_BASE_PHYS,
-+ .end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ {
-+ .start = IXP4XX_UART2_BASE_PHYS,
-+ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM,
-+ }
-+};
-+
-+
-+static struct plat_serial8250_port mi424wr_uart_platform_data[] = {
-+ {
-+ .mapbase = IXP4XX_UART1_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART1,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ {
-+ .mapbase = IXP4XX_UART2_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART2,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ { },
-+};
-+
-+static struct platform_device mi424wr_uart_device = {
-+ .name = "serial8250",
-+ .id = PLAT8250_DEV_PLATFORM,
-+ .dev.platform_data = mi424wr_uart_platform_data,
-+ .num_resources = ARRAY_SIZE(mi424wr_uart_resources),
-+ .resource = mi424wr_uart_resources,
-+};
-+
-+static struct flash_platform_data mi424wr_flash_data = {
-+ .map_name = "cfi_probe",
-+ .width = 2,
-+};
-+
-+static struct resource mi424wr_flash_resource = {
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct platform_device mi424wr_flash = {
-+ .name = "IXP4XX-Flash",
-+ .id = 0,
-+ .dev.platform_data = &mi424wr_flash_data,
-+ .num_resources = 1,
-+ .resource = &mi424wr_flash_resource,
-+};
-+
-+static int mi424wr_spi_boardinfo_setup(struct spi_board_info *bi,
-+ struct spi_master *master, void *data)
-+{
-+
-+ strlcpy(bi->modalias, "spi-ks8995", sizeof(bi->modalias));
-+
-+ bi->max_speed_hz = 5000000 /* Hz */;
-+ bi->bus_num = master->bus_num;
-+ bi->mode = SPI_MODE_0;
-+
-+ return 0;
-+}
-+
-+static struct spi_gpio_platform_data mi424wr_spi_bus_data = {
-+ .pin_cs = MI424WR_KSSPI_SELECT,
-+ .pin_clk = MI424WR_KSSPI_CLOCK,
-+ .pin_miso = MI424WR_KSSPI_RXD,
-+ .pin_mosi = MI424WR_KSSPI_TXD,
-+ .cs_activelow = 1,
-+ .no_spi_delay = 1,
-+ .boardinfo_setup = mi424wr_spi_boardinfo_setup,
-+};
-+
-+static struct gpio_led mi424wr_gpio_led[] = {
-+ {
-+ .name = "moca-wan", /* green led */
-+ .gpio = MI424WR_MOCA_WAN_LED,
-+ .active_low = 0,
-+ }
-+};
-+
-+static struct gpio_led_platform_data mi424wr_gpio_leds_data = {
-+ .num_leds = 1,
-+ .leds = mi424wr_gpio_led,
-+};
-+
-+static struct platform_device mi424wr_gpio_leds = {
-+ .name = "leds-gpio",
-+ .id = -1,
-+ .dev.platform_data = &mi424wr_gpio_leds_data,
-+};
-+
-+static uint16_t latch_value = MI424WR_LATCH_DEFAULT;
-+static uint16_t __iomem *iobase;
-+
-+static void mi424wr_latch_set_led(u8 bit, enum led_brightness value)
-+{
-+
-+ if (((MI424WR_LATCH_MASK >> bit) & 1) ^ (value == LED_OFF))
-+ latch_value &= ~(0x1 << bit);
-+ else
-+ latch_value |= (0x1 << bit);
-+
-+ __raw_writew(latch_value, iobase);
-+
-+}
-+
-+static struct latch_led mi424wr_latch_led[] = {
-+ {
-+ .name = "power-alarm",
-+ .bit = MI424WR_LATCH_ALARM_LED,
-+ },
-+ {
-+ .name = "power-ok",
-+ .bit = MI424WR_LATCH_POWER_LED,
-+ },
-+ {
-+ .name = "wireless", /* green led */
-+ .bit = MI424WR_LATCH_WIRELESS_LED,
-+ },
-+ {
-+ .name = "inet-down", /* red led */
-+ .bit = MI424WR_LATCH_INET_DOWN_LED,
-+ },
-+ {
-+ .name = "inet-up", /* green led */
-+ .bit = MI424WR_LATCH_INET_OK_LED,
-+ },
-+ {
-+ .name = "moca-lan", /* green led */
-+ .bit = MI424WR_LATCH_MOCA_LAN_LED,
-+ },
-+ {
-+ .name = "wan-alarm", /* red led */
-+ .bit = MI424WR_LATCH_WAN_ALARM_LED,
-+ }
-+};
-+
-+static struct latch_led_platform_data mi424wr_latch_leds_data = {
-+ .num_leds = ARRAY_SIZE(mi424wr_latch_led),
-+ .mem = 0x51000000,
-+ .leds = mi424wr_latch_led,
-+ .set_led = mi424wr_latch_set_led,
-+};
-+
-+static struct platform_device mi424wr_latch_leds = {
-+ .name = "leds-latch",
-+ .id = -1,
-+ .dev.platform_data = &mi424wr_latch_leds_data,
-+};
-+
-+static struct platform_device mi424wr_spi_bus = {
-+ .name = "spi-gpio",
-+ .id = 0,
-+ .dev.platform_data = &mi424wr_spi_bus_data,
-+};
-+
-+static struct eth_plat_info mi424wr_npeb_data = {
-+ .phy = 17, /* KS8721 */
-+ .rxq = 3,
-+ .txreadyq = 20,
-+};
-+
-+static struct eth_plat_info mi424wr_npec_data = {
-+ .phy = IXP4XX_ETH_PHY_MAX_ADDR,
-+ .phy_mask = 0x1e, /* ports 1-4 of the KS8995 switch */
-+ .rxq = 4,
-+ .txreadyq = 21,
-+};
-+
-+static struct platform_device mi424wr_npe_devices[] = {
-+ {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEC,
-+ .dev.platform_data = &mi424wr_npec_data,
-+ }, {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEB,
-+ .dev.platform_data = &mi424wr_npeb_data,
-+ }
-+};
-+
-+static struct platform_device *mi424wr_devices[] __initdata = {
-+ &mi424wr_uart_device,
-+ &mi424wr_flash,
-+ &mi424wr_gpio_leds,
-+ &mi424wr_latch_leds,
-+ &mi424wr_spi_bus,
-+ &mi424wr_npe_devices[0],
-+ &mi424wr_npe_devices[1],
-+};
-+
-+static void __init mi424wr_init(void)
-+{
-+ ixp4xx_sys_init();
-+
-+ mi424wr_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-+ mi424wr_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_8M - 1;
-+
-+ *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
-+ *IXP4XX_EXP_CS1 = MI424WR_CS1_CONFIG;
-+
-+ /* configure button as input
-+ */
-+ gpio_line_config(MI424WR_BUTTON_GPIO, IXP4XX_GPIO_IN);
-+
-+ /* Initialize LEDs and enables PCI bus.
-+ */
-+ iobase = ioremap_nocache(IXP4XX_EXP_BUS_BASE(1), 0x1000);
-+ __raw_writew(latch_value, iobase);
-+
-+ platform_add_devices(mi424wr_devices, ARRAY_SIZE(mi424wr_devices));
-+}
-+
-+
-+MACHINE_START(MI424WR, "Actiontec MI424WR")
-+ /* Maintainer: Jose Vasconcellos */
-+ .phys_io = IXP4XX_UART2_BASE_PHYS,
-+ .io_pg_offst = ((IXP4XX_UART2_BASE_VIRT) >> 18) & 0xfffc,
-+ .map_io = ixp4xx_map_io,
-+ .init_irq = ixp4xx_init_irq,
-+ .timer = &ixp4xx_timer,
-+ .boot_params = 0x0100,
-+ .init_machine = mi424wr_init,
-+MACHINE_END
-+
---- a/arch/arm/mach-ixp4xx/Makefile
-+++ b/arch/arm/mach-ixp4xx/Makefile
-@@ -23,6 +23,7 @@ obj-pci-$(CONFIG_MACH_COMPEX) += ixdp42
- obj-pci-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-pci.o
- obj-pci-$(CONFIG_MACH_AP1000) += ixdp425-pci.o
- obj-pci-$(CONFIG_MACH_TW5334) += tw5334-pci.o
-+obj-pci-$(CONFIG_MACH_MI424WR) += mi424wr-pci.o
-
- obj-y += common.o
-
-@@ -45,6 +46,7 @@ obj-$(CONFIG_MACH_COMPEX) += compex-setu
- obj-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-setup.o
- obj-$(CONFIG_MACH_AP1000) += ap1000-setup.o
- obj-$(CONFIG_MACH_TW5334) += tw5334-setup.o
-+obj-$(CONFIG_MACH_MI424WR) += mi424wr-setup.o
-
- obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o
- obj-$(CONFIG_IXP4XX_QMGR) += ixp4xx_qmgr.o
---- a/arch/arm/mach-ixp4xx/Kconfig
-+++ b/arch/arm/mach-ixp4xx/Kconfig
-@@ -235,6 +235,13 @@ config MACH_GTWX5715
- "High Speed" UART is n/c (as far as I can tell)
- 20 Pin ARM/Xscale JTAG interface on J2
-
-+config MACH_MI424WR
-+ bool "Actiontec MI424WR"
-+ depends on ARCH_IXP4XX
-+ select PCI
-+ help
-+ Add support for the Actiontec MI424-WR.
-+
- comment "IXP4xx Options"
-
- config IXP4XX_INDIRECT_PCI
---- a/arch/arm/configs/ixp4xx_defconfig
-+++ b/arch/arm/configs/ixp4xx_defconfig
-@@ -172,6 +172,7 @@ CONFIG_MACH_FSG=y
- CONFIG_CPU_IXP46X=y
- CONFIG_CPU_IXP43X=y
- CONFIG_MACH_GTWX5715=y
-+CONFIG_MACH_MI424WR=y
-
- #
- # IXP4xx Options
diff --git a/target/linux/ixp4xx/patches-2.6.35/190-cambria_support.patch b/target/linux/ixp4xx/patches-2.6.35/190-cambria_support.patch
deleted file mode 100644
index 6753451be..000000000
--- a/target/linux/ixp4xx/patches-2.6.35/190-cambria_support.patch
+++ /dev/null
@@ -1,553 +0,0 @@
---- /dev/null
-+++ b/arch/arm/mach-ixp4xx/cambria-pci.c
-@@ -0,0 +1,74 @@
-+/*
-+ * arch/arch/mach-ixp4xx/cambria-pci.c
-+ *
-+ * PCI setup routines for Gateworks Cambria series
-+ *
-+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * based on coyote-pci.c:
-+ * Copyright (C) 2002 Jungo Software Technologies.
-+ * Copyright (C) 2003 MontaVista Softwrae, Inc.
-+ *
-+ * Maintainer: Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/pci.h>
-+#include <linux/init.h>
-+#include <linux/irq.h>
-+
-+#include <asm/mach-types.h>
-+#include <mach/hardware.h>
-+#include <asm/irq.h>
-+
-+#include <asm/mach/pci.h>
-+
-+extern void ixp4xx_pci_preinit(void);
-+extern int ixp4xx_setup(int nr, struct pci_sys_data *sys);
-+extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys);
-+
-+void __init cambria_pci_preinit(void)
-+{
-+ set_irq_type(IRQ_IXP4XX_GPIO11, IRQ_TYPE_LEVEL_LOW);
-+ set_irq_type(IRQ_IXP4XX_GPIO10, IRQ_TYPE_LEVEL_LOW);
-+ set_irq_type(IRQ_IXP4XX_GPIO9, IRQ_TYPE_LEVEL_LOW);
-+ set_irq_type(IRQ_IXP4XX_GPIO8, IRQ_TYPE_LEVEL_LOW);
-+
-+ ixp4xx_pci_preinit();
-+}
-+
-+static int __init cambria_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+ if (slot == 1)
-+ return IRQ_IXP4XX_GPIO11;
-+ else if (slot == 2)
-+ return IRQ_IXP4XX_GPIO10;
-+ else if (slot == 3)
-+ return IRQ_IXP4XX_GPIO9;
-+ else if (slot == 4)
-+ return IRQ_IXP4XX_GPIO8;
-+ else return -1;
-+}
-+
-+struct hw_pci cambria_pci __initdata = {
-+ .nr_controllers = 1,
-+ .preinit = cambria_pci_preinit,
-+ .swizzle = pci_std_swizzle,
-+ .setup = ixp4xx_setup,
-+ .scan = ixp4xx_scan_bus,
-+ .map_irq = cambria_map_irq,
-+};
-+
-+int __init cambria_pci_init(void)
-+{
-+ if (machine_is_cambria())
-+ pci_common_init(&cambria_pci);
-+ return 0;
-+}
-+
-+subsys_initcall(cambria_pci_init);
---- /dev/null
-+++ b/arch/arm/mach-ixp4xx/cambria-setup.c
-@@ -0,0 +1,429 @@
-+/*
-+ * arch/arm/mach-ixp4xx/cambria-setup.c
-+ *
-+ * Board setup for the Gateworks Cambria series
-+ *
-+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * based on coyote-setup.c:
-+ * Copyright (C) 2003-2005 MontaVista Software, Inc.
-+ *
-+ * Author: Imre Kaloz <kaloz@openwrt.org>
-+ */
-+
-+#include <linux/device.h>
-+#include <linux/i2c.h>
-+#include <linux/i2c-gpio.h>
-+#include <linux/i2c/at24.h>
-+#include <linux/if_ether.h>
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/leds.h>
-+#include <linux/memory.h>
-+#include <linux/netdevice.h>
-+#include <linux/serial.h>
-+#include <linux/serial_8250.h>
-+#include <linux/slab.h>
-+#include <linux/socket.h>
-+#include <linux/types.h>
-+#include <linux/tty.h>
-+
-+#include <mach/hardware.h>
-+#include <asm/irq.h>
-+#include <asm/mach-types.h>
-+#include <asm/mach/arch.h>
-+#include <asm/mach/flash.h>
-+#include <asm/setup.h>
-+
-+struct cambria_board_info {
-+ unsigned char *model;
-+ void (*setup)(void);
-+};
-+
-+static struct cambria_board_info *cambria_info __initdata;
-+
-+static struct flash_platform_data cambria_flash_data = {
-+ .map_name = "cfi_probe",
-+ .width = 2,
-+};
-+
-+static struct resource cambria_flash_resource = {
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct platform_device cambria_flash = {
-+ .name = "IXP4XX-Flash",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = &cambria_flash_data,
-+ },
-+ .num_resources = 1,
-+ .resource = &cambria_flash_resource,
-+};
-+
-+static struct i2c_gpio_platform_data cambria_i2c_gpio_data = {
-+ .sda_pin = 7,
-+ .scl_pin = 6,
-+};
-+
-+static struct platform_device cambria_i2c_gpio = {
-+ .name = "i2c-gpio",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = &cambria_i2c_gpio_data,
-+ },
-+};
-+
-+static struct eth_plat_info cambria_npec_data = {
-+ .phy = 1,
-+ .rxq = 4,
-+ .txreadyq = 21,
-+};
-+
-+static struct eth_plat_info cambria_npea_data = {
-+ .phy = 2,
-+ .rxq = 2,
-+ .txreadyq = 19,
-+};
-+
-+static struct platform_device cambria_npec_device = {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEC,
-+ .dev.platform_data = &cambria_npec_data,
-+};
-+
-+static struct platform_device cambria_npea_device = {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEA,
-+ .dev.platform_data = &cambria_npea_data,
-+};
-+
-+static struct resource cambria_uart_resource = {
-+ .start = IXP4XX_UART1_BASE_PHYS,
-+ .end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct plat_serial8250_port cambria_uart_data[] = {
-+ {
-+ .mapbase = IXP4XX_UART1_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART1,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ { },
-+};
-+
-+static struct platform_device cambria_uart = {
-+ .name = "serial8250",
-+ .id = PLAT8250_DEV_PLATFORM,
-+ .dev = {
-+ .platform_data = cambria_uart_data,
-+ },
-+ .num_resources = 1,
-+ .resource = &cambria_uart_resource,
-+};
-+
-+static struct resource cambria_pata_resources[] = {
-+ {
-+ .flags = IORESOURCE_MEM
-+ },
-+ {
-+ .flags = IORESOURCE_MEM,
-+ },
-+ {
-+ .name = "intrq",
-+ .start = IRQ_IXP4XX_GPIO12,
-+ .end = IRQ_IXP4XX_GPIO12,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct ixp4xx_pata_data cambria_pata_data = {
-+ .cs0_bits = 0xbfff3c03,
-+ .cs1_bits = 0xbfff3c03,
-+};
-+
-+static struct platform_device cambria_pata = {
-+ .name = "pata_ixp4xx_cf",
-+ .id = 0,
-+ .dev.platform_data = &cambria_pata_data,
-+ .num_resources = ARRAY_SIZE(cambria_pata_resources),
-+ .resource = cambria_pata_resources,
-+};
-+
-+static struct gpio_led cambria_gpio_leds[] = {
-+ {
-+ .name = "user", /* green led */
-+ .gpio = 5,
-+ .active_low = 1,
-+ }
-+};
-+
-+static struct gpio_led_platform_data cambria_gpio_leds_data = {
-+ .num_leds = 1,
-+ .leds = cambria_gpio_leds,
-+};
-+
-+static struct platform_device cambria_gpio_leds_device = {
-+ .name = "leds-gpio",
-+ .id = -1,
-+ .dev.platform_data = &cambria_gpio_leds_data,
-+};
-+
-+static struct latch_led cambria_latch_leds[] = {
-+ {
-+ .name = "ledA", /* green led */
-+ .bit = 0,
-+ },
-+ {
-+ .name = "ledB", /* green led */
-+ .bit = 1,
-+ },
-+ {
-+ .name = "ledC", /* green led */
-+ .bit = 2,
-+ },
-+ {
-+ .name = "ledD", /* green led */
-+ .bit = 3,
-+ },
-+ {
-+ .name = "ledE", /* green led */
-+ .bit = 4,
-+ },
-+ {
-+ .name = "ledF", /* green led */
-+ .bit = 5,
-+ },
-+ {
-+ .name = "ledG", /* green led */
-+ .bit = 6,
-+ },
-+ {
-+ .name = "ledH", /* green led */
-+ .bit = 7,
-+ }
-+};
-+
-+static struct latch_led_platform_data cambria_latch_leds_data = {
-+ .num_leds = 8,
-+ .leds = cambria_latch_leds,
-+ .mem = 0x53F40000,
-+};
-+
-+static struct platform_device cambria_latch_leds_device = {
-+ .name = "leds-latch",
-+ .id = -1,
-+ .dev.platform_data = &cambria_latch_leds_data,
-+};
-+
-+static struct resource cambria_usb0_resources[] = {
-+ {
-+ .start = 0xCD000000,
-+ .end = 0xCD000300,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ {
-+ .start = 32,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct resource cambria_usb1_resources[] = {
-+ {
-+ .start = 0xCE000000,
-+ .end = 0xCE000300,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ {
-+ .start = 33,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static u64 ehci_dma_mask = ~(u32)0;
-+
-+static struct platform_device cambria_usb0_device = {
-+ .name = "ixp4xx-ehci",
-+ .id = 0,
-+ .resource = cambria_usb0_resources,
-+ .num_resources = ARRAY_SIZE(cambria_usb0_resources),
-+ .dev = {
-+ .dma_mask = &ehci_dma_mask,
-+ .coherent_dma_mask = 0xffffffff,
-+ },
-+};
-+
-+static struct platform_device cambria_usb1_device = {
-+ .name = "ixp4xx-ehci",
-+ .id = 1,
-+ .resource = cambria_usb1_resources,
-+ .num_resources = ARRAY_SIZE(cambria_usb1_resources),
-+ .dev = {
-+ .dma_mask = &ehci_dma_mask,
-+ .coherent_dma_mask = 0xffffffff,
-+ },
-+};
-+
-+static struct platform_device *cambria_devices[] __initdata = {
-+ &cambria_i2c_gpio,
-+ &cambria_flash,
-+ &cambria_uart,
-+};
-+
-+static void __init cambria_gw23xx_setup(void)
-+{
-+ platform_device_register(&cambria_npec_device);
-+ platform_device_register(&cambria_npea_device);
-+}
-+
-+static void __init cambria_gw2350_setup(void)
-+{
-+ platform_device_register(&cambria_npec_device);
-+ platform_device_register(&cambria_npea_device);
-+
-+ platform_device_register(&cambria_usb0_device);
-+ platform_device_register(&cambria_usb1_device);
-+
-+ platform_device_register(&cambria_gpio_leds_device);
-+}
-+
-+static void __init cambria_gw2358_setup(void)
-+{
-+ platform_device_register(&cambria_npec_device);
-+ platform_device_register(&cambria_npea_device);
-+
-+ platform_device_register(&cambria_usb0_device);
-+ platform_device_register(&cambria_usb1_device);
-+
-+ platform_device_register(&cambria_pata);
-+
-+ platform_device_register(&cambria_latch_leds_device);
-+}
-+
-+static struct cambria_board_info cambria_boards[] __initdata = {
-+ {
-+ .model = "GW2350",
-+ .setup = cambria_gw2350_setup,
-+ }, {
-+ .model = "GW2358",
-+ .setup = cambria_gw2358_setup,
-+ }
-+};
-+
-+static struct cambria_board_info * __init cambria_find_board_info(char *model)
-+{
-+ int i;
-+ model[6] = '\0';
-+
-+ for (i = 0; i < ARRAY_SIZE(cambria_boards); i++) {
-+ struct cambria_board_info *info = &cambria_boards[i];
-+ if (strcmp(info->model, model) == 0)
-+ return info;
-+ }
-+
-+ return NULL;
-+}
-+
-+static struct memory_accessor *at24_mem_acc;
-+
-+static void at24_setup(struct memory_accessor *mem_acc, void *context)
-+{
-+ char mac_addr[ETH_ALEN];
-+ char model[7];
-+
-+ at24_mem_acc = mem_acc;
-+
-+ /* Read MAC addresses */
-+ if (at24_mem_acc->read(at24_mem_acc, mac_addr, 0x0, 6) == 6) {
-+ memcpy(&cambria_npec_data.hwaddr, mac_addr, ETH_ALEN);
-+ }
-+ if (at24_mem_acc->read(at24_mem_acc, mac_addr, 0x6, 6) == 6) {
-+ memcpy(&cambria_npea_data.hwaddr, mac_addr, ETH_ALEN);
-+ }
-+
-+ /* Read the first 6 bytes of the model number */
-+ if (at24_mem_acc->read(at24_mem_acc, model, 0x20, 6) == 6) {
-+ cambria_info = cambria_find_board_info(model);
-+ }
-+
-+}
-+
-+static struct at24_platform_data cambria_eeprom_info = {
-+ .byte_len = 1024,
-+ .page_size = 16,
-+ .flags = AT24_FLAG_READONLY,
-+ .setup = at24_setup,
-+};
-+
-+static struct i2c_board_info __initdata cambria_i2c_board_info[] = {
-+ {
-+ I2C_BOARD_INFO("ds1672", 0x68),
-+ },
-+ {
-+ I2C_BOARD_INFO("ad7418", 0x28),
-+ },
-+ {
-+ I2C_BOARD_INFO("24c08", 0x51),
-+ .platform_data = &cambria_eeprom_info
-+ },
-+};
-+
-+static void __init cambria_init(void)
-+{
-+ ixp4xx_sys_init();
-+
-+ cambria_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-+ cambria_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
-+
-+ *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
-+ *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
-+
-+ platform_add_devices(cambria_devices, ARRAY_SIZE(cambria_devices));
-+
-+ cambria_pata_resources[0].start = 0x53e00000;
-+ cambria_pata_resources[0].end = 0x53e3ffff;
-+
-+ cambria_pata_resources[1].start = 0x53e40000;
-+ cambria_pata_resources[1].end = 0x53e7ffff;
-+
-+ cambria_pata_data.cs0_cfg = IXP4XX_EXP_CS3;
-+ cambria_pata_data.cs1_cfg = IXP4XX_EXP_CS3;
-+
-+ i2c_register_board_info(0, cambria_i2c_board_info,
-+ ARRAY_SIZE(cambria_i2c_board_info));
-+}
-+
-+static int __init cambria_model_setup(void)
-+{
-+ if (!machine_is_cambria())
-+ return 0;
-+
-+ if (cambria_info) {
-+ printk(KERN_DEBUG "Running on Gateworks Cambria %s\n",
-+ cambria_info->model);
-+ cambria_info->setup();
-+ } else {
-+ printk(KERN_INFO "Unknown/missing Cambria model number"
-+ " -- defaults will be used\n");
-+ cambria_gw23xx_setup();
-+ }
-+
-+ return 0;
-+}
-+late_initcall(cambria_model_setup);
-+
-+MACHINE_START(CAMBRIA, "Gateworks Cambria series")
-+ /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
-+ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
-+ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
-+ .map_io = ixp4xx_map_io,
-+ .init_irq = ixp4xx_init_irq,
-+ .timer = &ixp4xx_timer,
-+ .boot_params = 0x0100,
-+ .init_machine = cambria_init,
-+MACHINE_END
---- a/arch/arm/mach-ixp4xx/Kconfig
-+++ b/arch/arm/mach-ixp4xx/Kconfig
-@@ -25,6 +25,14 @@ config MACH_AVILA
- Avila Network Platform. For more information on this platform,
- see <file:Documentation/arm/IXP4xx>.
-
-+config MACH_CAMBRIA
-+ bool "Cambria"
-+ select PCI
-+ help
-+ Say 'Y' here if you want your kernel to support the Gateworks
-+ Cambria series. For more information on this platform,
-+ see <file:Documentation/arm/IXP4xx>.
-+
- config MACH_LOFT
- bool "Loft"
- depends on MACH_AVILA
-@@ -214,7 +222,7 @@ config CPU_IXP46X
-
- config CPU_IXP43X
- bool
-- depends on MACH_KIXRP435
-+ depends on MACH_KIXRP435 || MACH_CAMBRIA
- default y
-
- config MACH_GTWX5715
---- a/arch/arm/mach-ixp4xx/Makefile
-+++ b/arch/arm/mach-ixp4xx/Makefile
-@@ -7,6 +7,7 @@ obj-pci-n :=
-
- obj-pci-$(CONFIG_ARCH_IXDP4XX) += ixdp425-pci.o
- obj-pci-$(CONFIG_MACH_AVILA) += avila-pci.o
-+obj-pci-$(CONFIG_MACH_CAMBRIA) += cambria-pci.o
- obj-pci-$(CONFIG_MACH_IXDPG425) += ixdpg425-pci.o
- obj-pci-$(CONFIG_ARCH_ADI_COYOTE) += coyote-pci.o
- obj-pci-$(CONFIG_MACH_GTWX5715) += gtwx5715-pci.o
-@@ -29,6 +30,7 @@ obj-y += common.o
-
- obj-$(CONFIG_ARCH_IXDP4XX) += ixdp425-setup.o
- obj-$(CONFIG_MACH_AVILA) += avila-setup.o
-+obj-$(CONFIG_MACH_CAMBRIA) += cambria-setup.o
- obj-$(CONFIG_MACH_IXDPG425) += coyote-setup.o
- obj-$(CONFIG_ARCH_ADI_COYOTE) += coyote-setup.o
- obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-setup.o
diff --git a/target/linux/ixp4xx/patches-2.6.35/191-cambria_optional_uart.patch b/target/linux/ixp4xx/patches-2.6.35/191-cambria_optional_uart.patch
deleted file mode 100644
index 2ebe3e4e3..000000000
--- a/target/linux/ixp4xx/patches-2.6.35/191-cambria_optional_uart.patch
+++ /dev/null
@@ -1,217 +0,0 @@
---- a/arch/arm/mach-ixp4xx/cambria-setup.c
-+++ b/arch/arm/mach-ixp4xx/cambria-setup.c
-@@ -34,6 +34,7 @@
- #include <asm/mach/arch.h>
- #include <asm/mach/flash.h>
- #include <asm/setup.h>
-+#include <linux/irq.h>
-
- struct cambria_board_info {
- unsigned char *model;
-@@ -127,6 +128,45 @@ static struct platform_device cambria_ua
- .resource = &cambria_uart_resource,
- };
-
-+static struct resource cambria_optional_uart_resources[] = {
-+ {
-+ .start = 0x52000000,
-+ .end = 0x52000fff,
-+ .flags = IORESOURCE_MEM
-+ },
-+ {
-+ .start = 0x53000000,
-+ .end = 0x53000fff,
-+ .flags = IORESOURCE_MEM
-+ }
-+};
-+
-+static struct plat_serial8250_port cambria_optional_uart_data[] = {
-+ {
-+ .flags = UPF_BOOT_AUTOCONF,
-+ .iotype = UPIO_MEM_DELAY,
-+ .regshift = 0,
-+ .uartclk = 1843200,
-+ .rw_delay = 2,
-+ },
-+ {
-+ .flags = UPF_BOOT_AUTOCONF,
-+ .iotype = UPIO_MEM_DELAY,
-+ .regshift = 0,
-+ .uartclk = 1843200,
-+ .rw_delay = 2,
-+ },
-+ { },
-+};
-+
-+static struct platform_device cambria_optional_uart = {
-+ .name = "serial8250",
-+ .id = PLAT8250_DEV_PLATFORM1,
-+ .dev.platform_data = cambria_optional_uart_data,
-+ .num_resources = 2,
-+ .resource = cambria_optional_uart_resources,
-+};
-+
- static struct resource cambria_pata_resources[] = {
- {
- .flags = IORESOURCE_MEM
-@@ -283,6 +323,19 @@ static void __init cambria_gw23xx_setup(
-
- static void __init cambria_gw2350_setup(void)
- {
-+ *IXP4XX_EXP_CS2 = 0xBFFF3C43;
-+ set_irq_type(IRQ_IXP4XX_GPIO3, IRQ_TYPE_EDGE_RISING);
-+ cambria_optional_uart_data[0].mapbase = 0x52FF0000;
-+ cambria_optional_uart_data[0].membase = (void __iomem *)ioremap(0x52FF0000, 0x0fff);
-+ cambria_optional_uart_data[0].irq = IRQ_IXP4XX_GPIO3;
-+
-+ *IXP4XX_EXP_CS3 = 0xBFFF3C43;
-+ set_irq_type(IRQ_IXP4XX_GPIO4, IRQ_TYPE_EDGE_RISING);
-+ cambria_optional_uart_data[1].mapbase = 0x53FF0000;
-+ cambria_optional_uart_data[1].membase = (void __iomem *)ioremap(0x53FF0000, 0x0fff);
-+ cambria_optional_uart_data[1].irq = IRQ_IXP4XX_GPIO4;
-+
-+ platform_device_register(&cambria_optional_uart);
- platform_device_register(&cambria_npec_device);
- platform_device_register(&cambria_npea_device);
-
-@@ -294,6 +347,19 @@ static void __init cambria_gw2350_setup(
-
- static void __init cambria_gw2358_setup(void)
- {
-+ *IXP4XX_EXP_CS3 = 0xBFFF3C43;
-+ set_irq_type(IRQ_IXP4XX_GPIO3, IRQ_TYPE_EDGE_RISING);
-+ cambria_optional_uart_data[0].mapbase = 0x53FC0000;
-+ cambria_optional_uart_data[0].membase = (void __iomem *)ioremap(0x53FC0000, 0x0fff);
-+ cambria_optional_uart_data[0].irq = IRQ_IXP4XX_GPIO3;
-+
-+ set_irq_type(IRQ_IXP4XX_GPIO4, IRQ_TYPE_EDGE_RISING);
-+ cambria_optional_uart_data[1].mapbase = 0x53F80000;
-+ cambria_optional_uart_data[1].membase = (void __iomem *)ioremap(0x53F80000, 0x0fff);
-+ cambria_optional_uart_data[1].irq = IRQ_IXP4XX_GPIO4;
-+
-+ platform_device_register(&cambria_optional_uart);
-+
- platform_device_register(&cambria_npec_device);
- platform_device_register(&cambria_npea_device);
-
---- a/include/linux/serial_8250.h
-+++ b/include/linux/serial_8250.h
-@@ -27,6 +27,7 @@ struct plat_serial8250_port {
- void *private_data;
- unsigned char regshift; /* register shift */
- unsigned char iotype; /* UPIO_* */
-+ unsigned int rw_delay; /* udelay for slower busses IXP4XX Expansion Bus */
- unsigned char hub6;
- upf_t flags; /* UPF_* flags */
- unsigned int type; /* If UPF_FIXED_TYPE */
---- a/include/linux/serial_core.h
-+++ b/include/linux/serial_core.h
-@@ -288,6 +288,7 @@ struct uart_port {
- #define UPIO_TSI (5) /* Tsi108/109 type IO */
- #define UPIO_DWAPB (6) /* DesignWare APB UART */
- #define UPIO_RM9000 (7) /* RM9000 type IO */
-+#define UPIO_MEM_DELAY (8)
-
- unsigned int read_status_mask; /* driver specific */
- unsigned int ignore_status_mask; /* driver specific */
-@@ -330,6 +331,7 @@ struct uart_port {
-
- unsigned int mctrl; /* current modem ctrl settings */
- unsigned int timeout; /* character-based timeout */
-+ unsigned int rw_delay; /* udelay for slow busses, IXP4XX Expansion Bus */
- unsigned int type; /* port type */
- const struct uart_ops *ops;
- unsigned int custom_divisor;
---- a/drivers/serial/8250.c
-+++ b/drivers/serial/8250.c
-@@ -409,6 +409,20 @@ static void mem_serial_out(struct uart_p
- writeb(value, p->membase + offset);
- }
-
-+static unsigned int memdelay_serial_in(struct uart_port *p, int offset)
-+{
-+ struct uart_8250_port *up = (struct uart_8250_port *)p;
-+ udelay(up->port.rw_delay);
-+ return mem_serial_in(p, offset);
-+}
-+
-+static void memdelay_serial_out(struct uart_port *p, int offset, int value)
-+{
-+ struct uart_8250_port *up = (struct uart_8250_port *)p;
-+ udelay(up->port.rw_delay);
-+ mem_serial_out(p, offset, value);
-+}
-+
- static void mem32_serial_out(struct uart_port *p, int offset, int value)
- {
- offset = map_8250_out_reg(p, offset) << p->regshift;
-@@ -502,6 +516,11 @@ static void set_io_from_upio(struct uart
- p->serial_out = mem32_serial_out;
- break;
-
-+ case UPIO_MEM_DELAY:
-+ p->serial_in = memdelay_serial_in;
-+ p->serial_out = memdelay_serial_out;
-+ break;
-+
- #ifdef CONFIG_SERIAL_8250_AU1X00
- case UPIO_AU:
- p->serial_in = au_serial_in;
-@@ -534,6 +553,7 @@ serial_out_sync(struct uart_8250_port *u
- switch (p->iotype) {
- case UPIO_MEM:
- case UPIO_MEM32:
-+ case UPIO_MEM_DELAY:
- #ifdef CONFIG_SERIAL_8250_AU1X00
- case UPIO_AU:
- #endif
-@@ -2450,6 +2470,7 @@ static int serial8250_request_std_resour
- case UPIO_MEM32:
- case UPIO_MEM:
- case UPIO_DWAPB:
-+ case UPIO_MEM_DELAY:
- if (!up->port.mapbase)
- break;
-
-@@ -2487,6 +2508,7 @@ static void serial8250_release_std_resou
- case UPIO_MEM32:
- case UPIO_MEM:
- case UPIO_DWAPB:
-+ case UPIO_MEM_DELAY:
- if (!up->port.mapbase)
- break;
-
-@@ -2964,6 +2986,7 @@ static int __devinit serial8250_probe(st
- port.serial_in = p->serial_in;
- port.serial_out = p->serial_out;
- port.dev = &dev->dev;
-+ port.rw_delay = p->rw_delay;
- port.irqflags |= irqflag;
- ret = serial8250_register_port(&port);
- if (ret < 0) {
-@@ -3113,6 +3136,7 @@ int serial8250_register_port(struct uart
- uart->port.iotype = port->iotype;
- uart->port.flags = port->flags | UPF_BOOT_AUTOCONF;
- uart->port.mapbase = port->mapbase;
-+ uart->port.rw_delay = port->rw_delay;
- uart->port.private_data = port->private_data;
- if (port->dev)
- uart->port.dev = port->dev;
---- a/drivers/serial/serial_core.c
-+++ b/drivers/serial/serial_core.c
-@@ -2144,6 +2144,7 @@ uart_report_port(struct uart_driver *drv
- snprintf(address, sizeof(address),
- "I/O 0x%lx offset 0x%x", port->iobase, port->hub6);
- break;
-+ case UPIO_MEM_DELAY:
- case UPIO_MEM:
- case UPIO_MEM32:
- case UPIO_AU:
-@@ -2557,6 +2558,7 @@ int uart_match_port(struct uart_port *po
- case UPIO_HUB6:
- return (port1->iobase == port2->iobase) &&
- (port1->hub6 == port2->hub6);
-+ case UPIO_MEM_DELAY:
- case UPIO_MEM:
- case UPIO_MEM32:
- case UPIO_AU:
diff --git a/target/linux/ixp4xx/patches-2.6.35/192-cambria_gpio_device.patch b/target/linux/ixp4xx/patches-2.6.35/192-cambria_gpio_device.patch
deleted file mode 100644
index d785c3a8c..000000000
--- a/target/linux/ixp4xx/patches-2.6.35/192-cambria_gpio_device.patch
+++ /dev/null
@@ -1,46 +0,0 @@
---- a/arch/arm/mach-ixp4xx/cambria-setup.c
-+++ b/arch/arm/mach-ixp4xx/cambria-setup.c
-@@ -214,6 +214,20 @@ static struct platform_device cambria_gp
- .dev.platform_data = &cambria_gpio_leds_data,
- };
-
-+static struct resource cambria_gpio_resources[] = {
-+ {
-+ .name = "gpio",
-+ .flags = 0,
-+ },
-+};
-+
-+static struct platform_device cambria_gpio = {
-+ .name = "GPIODEV",
-+ .id = -1,
-+ .num_resources = ARRAY_SIZE(cambria_gpio_resources),
-+ .resource = cambria_gpio_resources,
-+};
-+
- static struct latch_led cambria_latch_leds[] = {
- {
- .name = "ledA", /* green led */
-@@ -335,6 +349,11 @@ static void __init cambria_gw2350_setup(
- cambria_optional_uart_data[1].membase = (void __iomem *)ioremap(0x53FF0000, 0x0fff);
- cambria_optional_uart_data[1].irq = IRQ_IXP4XX_GPIO4;
-
-+ cambria_gpio_resources[0].start = (1 << 0) | (1 << 1) | (1 << 2) | (1 << 3) | (1 << 4) |\
-+ (1 << 5) | (1 << 8) | (1 << 9) | (1 << 12);
-+ cambria_gpio_resources[0].end = cambria_gpio_resources[0].start;
-+
-+ platform_device_register(&cambria_gpio);
- platform_device_register(&cambria_optional_uart);
- platform_device_register(&cambria_npec_device);
- platform_device_register(&cambria_npea_device);
-@@ -358,6 +377,10 @@ static void __init cambria_gw2358_setup(
- cambria_optional_uart_data[1].membase = (void __iomem *)ioremap(0x53F80000, 0x0fff);
- cambria_optional_uart_data[1].irq = IRQ_IXP4XX_GPIO4;
-
-+ cambria_gpio_resources[0].start = (1 << 14);
-+ cambria_gpio_resources[0].end = cambria_gpio_resources[0].start;
-+
-+ platform_device_register(&cambria_gpio);
- platform_device_register(&cambria_optional_uart);
-
- platform_device_register(&cambria_npec_device);
diff --git a/target/linux/ixp4xx/patches-2.6.35/193-cambria_pld_gpio.patch b/target/linux/ixp4xx/patches-2.6.35/193-cambria_pld_gpio.patch
deleted file mode 100644
index 299630f17..000000000
--- a/target/linux/ixp4xx/patches-2.6.35/193-cambria_pld_gpio.patch
+++ /dev/null
@@ -1,107 +0,0 @@
---- a/arch/arm/mach-ixp4xx/cambria-setup.c
-+++ b/arch/arm/mach-ixp4xx/cambria-setup.c
-@@ -12,11 +12,14 @@
- */
-
- #include <linux/device.h>
-+#include <linux/gpio_buttons.h>
- #include <linux/i2c.h>
- #include <linux/i2c-gpio.h>
- #include <linux/i2c/at24.h>
-+#include <linux/i2c/gw_i2c_pld.h>
- #include <linux/if_ether.h>
- #include <linux/init.h>
-+#include <linux/input.h>
- #include <linux/kernel.h>
- #include <linux/leds.h>
- #include <linux/memory.h>
-@@ -323,6 +326,39 @@ static struct platform_device cambria_us
- },
- };
-
-+static struct gw_i2c_pld_platform_data gw_i2c_pld_data0 = {
-+ .gpio_base = 16,
-+ .nr_gpio = 8,
-+};
-+
-+static struct gw_i2c_pld_platform_data gw_i2c_pld_data1 = {
-+ .gpio_base = 24,
-+ .nr_gpio = 2,
-+};
-+
-+
-+static struct gpio_button cambria_gpio_buttons[] = {
-+ {
-+ .desc = "user",
-+ .type = EV_KEY,
-+ .code = BTN_0,
-+ .threshold = 2,
-+ .gpio = 25,
-+ }
-+};
-+
-+static struct gpio_buttons_platform_data cambria_gpio_buttons_data = {
-+ .poll_interval = 500,
-+ .nbuttons = 1,
-+ .buttons = cambria_gpio_buttons,
-+};
-+
-+static struct platform_device cambria_gpio_buttons_device = {
-+ .name = "gpio-buttons",
-+ .id = -1,
-+ .dev.platform_data = &cambria_gpio_buttons_data,
-+};
-+
- static struct platform_device *cambria_devices[] __initdata = {
- &cambria_i2c_gpio,
- &cambria_flash,
-@@ -331,6 +367,11 @@ static struct platform_device *cambria_d
-
- static void __init cambria_gw23xx_setup(void)
- {
-+ cambria_gpio_resources[0].start = (1 << 0) | (1 << 1) | (1 << 2) | (1 << 3) | (1 << 4) |\
-+ (1 << 5) | (1 << 8) | (1 << 9) | (1 << 12);
-+ cambria_gpio_resources[0].end = cambria_gpio_resources[0].start;
-+
-+ platform_device_register(&cambria_gpio);
- platform_device_register(&cambria_npec_device);
- platform_device_register(&cambria_npea_device);
- }
-@@ -377,7 +418,8 @@ static void __init cambria_gw2358_setup(
- cambria_optional_uart_data[1].membase = (void __iomem *)ioremap(0x53F80000, 0x0fff);
- cambria_optional_uart_data[1].irq = IRQ_IXP4XX_GPIO4;
-
-- cambria_gpio_resources[0].start = (1 << 14);
-+ cambria_gpio_resources[0].start = (1 << 14) | (1 << 16) | (1 << 17) | (1 << 18) |\
-+ (1 << 19) | (1 << 20) | (1 << 24) | (1 << 25);
- cambria_gpio_resources[0].end = cambria_gpio_resources[0].start;
-
- platform_device_register(&cambria_gpio);
-@@ -391,7 +433,12 @@ static void __init cambria_gw2358_setup(
-
- platform_device_register(&cambria_pata);
-
-+ cambria_gpio_leds[0].gpio = 24;
-+ platform_device_register(&cambria_gpio_leds_device);
-+
- platform_device_register(&cambria_latch_leds_device);
-+
-+ platform_device_register(&cambria_gpio_buttons_device);
- }
-
- static struct cambria_board_info cambria_boards[] __initdata = {
-@@ -460,6 +507,14 @@ static struct i2c_board_info __initdata
- I2C_BOARD_INFO("24c08", 0x51),
- .platform_data = &cambria_eeprom_info
- },
-+ {
-+ I2C_BOARD_INFO("gw_i2c_pld", 0x56),
-+ .platform_data = &gw_i2c_pld_data0,
-+ },
-+ {
-+ I2C_BOARD_INFO("gw_i2c_pld", 0x57),
-+ .platform_data = &gw_i2c_pld_data1,
-+ },
- };
-
- static void __init cambria_init(void)
diff --git a/target/linux/ixp4xx/patches-2.6.35/201-npe_driver_print_license_location.patch b/target/linux/ixp4xx/patches-2.6.35/201-npe_driver_print_license_location.patch
deleted file mode 100644
index b97dd77dc..000000000
--- a/target/linux/ixp4xx/patches-2.6.35/201-npe_driver_print_license_location.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/arch/arm/mach-ixp4xx/ixp4xx_npe.c
-+++ b/arch/arm/mach-ixp4xx/ixp4xx_npe.c
-@@ -583,6 +583,8 @@ int npe_load_firmware(struct npe *npe, c
- npe_reset(npe);
- #endif
-
-+ print_npe(KERN_INFO, npe, "firmware's license can be found in /usr/share/doc/LICENSE.IPL\n");
-+
- print_npe(KERN_INFO, npe, "firmware functionality 0x%X, "
- "revision 0x%X:%X\n", (image->id >> 16) & 0xFF,
- (image->id >> 8) & 0xFF, image->id & 0xFF);
diff --git a/target/linux/ixp4xx/patches-2.6.35/203-npe_driver_mask_phy_features.patch b/target/linux/ixp4xx/patches-2.6.35/203-npe_driver_mask_phy_features.patch
deleted file mode 100644
index eacf35d07..000000000
--- a/target/linux/ixp4xx/patches-2.6.35/203-npe_driver_mask_phy_features.patch
+++ /dev/null
@@ -1,13 +0,0 @@
---- a/drivers/net/arm/ixp4xx_eth.c
-+++ b/drivers/net/arm/ixp4xx_eth.c
-@@ -1217,6 +1217,10 @@ static int __devinit eth_init_one(struct
- if ((err = IS_ERR(port->phydev)))
- goto err_free_mem;
-
-+ /* mask with MAC supported features */
-+ port->phydev->supported &= PHY_BASIC_FEATURES;
-+ port->phydev->advertising = port->phydev->supported;
-+
- port->phydev->irq = PHY_POLL;
-
- if ((err = register_netdev(dev)))
diff --git a/target/linux/ixp4xx/patches-2.6.35/205-npe_driver_separate_phy_functions.patch b/target/linux/ixp4xx/patches-2.6.35/205-npe_driver_separate_phy_functions.patch
deleted file mode 100644
index b9835a012..000000000
--- a/target/linux/ixp4xx/patches-2.6.35/205-npe_driver_separate_phy_functions.patch
+++ /dev/null
@@ -1,119 +0,0 @@
---- a/drivers/net/arm/ixp4xx_eth.c
-+++ b/drivers/net/arm/ixp4xx_eth.c
-@@ -396,6 +396,50 @@ static void ixp4xx_adjust_link(struct ne
- dev->name, port->speed, port->duplex ? "full" : "half");
- }
-
-+static int ixp4xx_phy_connect(struct net_device *dev)
-+{
-+ struct port *port = netdev_priv(dev);
-+ struct eth_plat_info *plat = port->plat;
-+ char phy_id[MII_BUS_ID_SIZE + 3];
-+
-+ snprintf(phy_id, MII_BUS_ID_SIZE + 3, PHY_ID_FMT, "0", plat->phy);
-+ port->phydev = phy_connect(dev, phy_id, &ixp4xx_adjust_link, 0,
-+ PHY_INTERFACE_MODE_MII);
-+ if (IS_ERR(port->phydev)) {
-+ printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name);
-+ return PTR_ERR(port->phydev);
-+ }
-+
-+ /* mask with MAC supported features */
-+ port->phydev->supported &= PHY_BASIC_FEATURES;
-+ port->phydev->advertising = port->phydev->supported;
-+
-+ port->phydev->irq = PHY_POLL;
-+
-+ return 0;
-+}
-+
-+static void ixp4xx_phy_disconnect(struct net_device *dev)
-+{
-+ struct port *port = netdev_priv(dev);
-+
-+ phy_disconnect(port->phydev);
-+}
-+
-+static void ixp4xx_phy_start(struct net_device *dev)
-+{
-+ struct port *port = netdev_priv(dev);
-+
-+ port->speed = 0; /* force "link up" message */
-+ phy_start(port->phydev);
-+}
-+
-+static void ixp4xx_phy_stop(struct net_device *dev)
-+{
-+ struct port *port = netdev_priv(dev);
-+
-+ phy_stop(port->phydev);
-+}
-
- static inline void debug_pkt(struct net_device *dev, const char *func,
- u8 *data, int len)
-@@ -1005,8 +1049,7 @@ static int eth_open(struct net_device *d
- return err;
- }
-
-- port->speed = 0; /* force "link up" message */
-- phy_start(port->phydev);
-+ ixp4xx_phy_start(dev);
-
- for (i = 0; i < ETH_ALEN; i++)
- __raw_writel(dev->dev_addr[i], &port->regs->hw_addr[i]);
-@@ -1127,7 +1170,7 @@ static int eth_close(struct net_device *
- printk(KERN_CRIT "%s: unable to disable loopback\n",
- dev->name);
-
-- phy_stop(port->phydev);
-+ ixp4xx_phy_stop(dev);
-
- if (!ports_open)
- qmgr_disable_irq(TXDONE_QUEUE);
-@@ -1153,7 +1196,6 @@ static int __devinit eth_init_one(struct
- struct net_device *dev;
- struct eth_plat_info *plat = pdev->dev.platform_data;
- u32 regs_phys;
-- char phy_id[MII_BUS_ID_SIZE + 3];
- int err;
-
- if (!(dev = alloc_etherdev(sizeof(struct port))))
-@@ -1211,18 +1253,10 @@ static int __devinit eth_init_one(struct
- __raw_writel(DEFAULT_CORE_CNTRL, &port->regs->core_control);
- udelay(50);
-
-- snprintf(phy_id, MII_BUS_ID_SIZE + 3, PHY_ID_FMT, "0", plat->phy);
-- port->phydev = phy_connect(dev, phy_id, &ixp4xx_adjust_link, 0,
-- PHY_INTERFACE_MODE_MII);
-- if ((err = IS_ERR(port->phydev)))
-+ err = ixp4xx_phy_connect(dev);
-+ if (err)
- goto err_free_mem;
-
-- /* mask with MAC supported features */
-- port->phydev->supported &= PHY_BASIC_FEATURES;
-- port->phydev->advertising = port->phydev->supported;
--
-- port->phydev->irq = PHY_POLL;
--
- if ((err = register_netdev(dev)))
- goto err_phy_dis;
-
-@@ -1232,7 +1266,7 @@ static int __devinit eth_init_one(struct
- return 0;
-
- err_phy_dis:
-- phy_disconnect(port->phydev);
-+ ixp4xx_phy_disconnect(port->phydev);
- err_free_mem:
- npe_port_tab[NPE_ID(port->id)] = NULL;
- platform_set_drvdata(pdev, NULL);
-@@ -1250,7 +1284,7 @@ static int __devexit eth_remove_one(stru
- struct port *port = netdev_priv(dev);
-
- unregister_netdev(dev);
-- phy_disconnect(port->phydev);
-+ ixp4xx_phy_disconnect(dev);
- npe_port_tab[NPE_ID(port->id)] = NULL;
- platform_set_drvdata(pdev, NULL);
- npe_release(port->npe);
diff --git a/target/linux/ixp4xx/patches-2.6.35/206-npe_driver_add_update_link_function.patch b/target/linux/ixp4xx/patches-2.6.35/206-npe_driver_add_update_link_function.patch
deleted file mode 100644
index 419ec4cdb..000000000
--- a/target/linux/ixp4xx/patches-2.6.35/206-npe_driver_add_update_link_function.patch
+++ /dev/null
@@ -1,98 +0,0 @@
---- a/drivers/net/arm/ixp4xx_eth.c
-+++ b/drivers/net/arm/ixp4xx_eth.c
-@@ -168,7 +168,7 @@ struct port {
- struct desc *desc_tab; /* coherent */
- u32 desc_tab_phys;
- int id; /* logical port ID */
-- int speed, duplex;
-+ int link, speed, duplex;
- u8 firmware[4];
- };
-
-@@ -365,37 +365,52 @@ static void ixp4xx_mdio_remove(void)
- mdiobus_free(mdio_bus);
- }
-
--
--static void ixp4xx_adjust_link(struct net_device *dev)
-+static void ixp4xx_update_link(struct net_device *dev)
- {
- struct port *port = netdev_priv(dev);
-- struct phy_device *phydev = port->phydev;
-
-- if (!phydev->link) {
-- if (port->speed) {
-- port->speed = 0;
-- printk(KERN_INFO "%s: link down\n", dev->name);
-- }
-+ if (!port->link) {
-+ netif_carrier_off(dev);
-+ printk(KERN_INFO "%s: link down\n", dev->name);
- return;
- }
-
-- if (port->speed == phydev->speed && port->duplex == phydev->duplex)
-- return;
--
-- port->speed = phydev->speed;
-- port->duplex = phydev->duplex;
--
-- if (port->duplex)
-+ if (port->duplex == DUPLEX_FULL)
- __raw_writel(DEFAULT_TX_CNTRL0 & ~TX_CNTRL0_HALFDUPLEX,
- &port->regs->tx_control[0]);
- else
- __raw_writel(DEFAULT_TX_CNTRL0 | TX_CNTRL0_HALFDUPLEX,
- &port->regs->tx_control[0]);
-
-+ netif_carrier_on(dev);
- printk(KERN_INFO "%s: link up, speed %u Mb/s, %s duplex\n",
- dev->name, port->speed, port->duplex ? "full" : "half");
- }
-
-+static void ixp4xx_adjust_link(struct net_device *dev)
-+{
-+ struct port *port = netdev_priv(dev);
-+ struct phy_device *phydev = port->phydev;
-+ int status_change = 0;
-+
-+ if (phydev->link) {
-+ if (port->duplex != phydev->duplex
-+ || port->speed != phydev->speed) {
-+ status_change = 1;
-+ }
-+ }
-+
-+ if (phydev->link != port->link)
-+ status_change = 1;
-+
-+ port->link = phydev->link;
-+ port->speed = phydev->speed;
-+ port->duplex = phydev->duplex;
-+
-+ if (status_change)
-+ ixp4xx_update_link(dev);
-+}
-+
- static int ixp4xx_phy_connect(struct net_device *dev)
- {
- struct port *port = netdev_priv(dev);
-@@ -430,7 +445,6 @@ static void ixp4xx_phy_start(struct net_
- {
- struct port *port = netdev_priv(dev);
-
-- port->speed = 0; /* force "link up" message */
- phy_start(port->phydev);
- }
-
-@@ -1260,6 +1274,10 @@ static int __devinit eth_init_one(struct
- if ((err = register_netdev(dev)))
- goto err_phy_dis;
-
-+ port->link = 0;
-+ port->speed = 0;
-+ port->duplex = -1;
-+
- printk(KERN_INFO "%s: MII PHY %i on %s\n", dev->name, plat->phy,
- npe_name(port->npe));
-
diff --git a/target/linux/ixp4xx/patches-2.6.35/207-npe_driver_multiphy_support.patch b/target/linux/ixp4xx/patches-2.6.35/207-npe_driver_multiphy_support.patch
deleted file mode 100644
index afcf7e156..000000000
--- a/target/linux/ixp4xx/patches-2.6.35/207-npe_driver_multiphy_support.patch
+++ /dev/null
@@ -1,155 +0,0 @@
-TODO: take care of additional PHYs through the PHY abstraction layer
-
---- a/arch/arm/mach-ixp4xx/include/mach/platform.h
-+++ b/arch/arm/mach-ixp4xx/include/mach/platform.h
-@@ -72,7 +72,7 @@ extern unsigned long ixp4xx_exp_bus_size
- /*
- * Clock Speed Definitions.
- */
--#define IXP4XX_PERIPHERAL_BUS_CLOCK (66) /* 66Mhzi APB BUS */
-+#define IXP4XX_PERIPHERAL_BUS_CLOCK (66) /* 66Mhzi APB BUS */
- #define IXP4XX_UART_XTAL 14745600
-
- /*
-@@ -95,12 +95,23 @@ struct sys_timer;
- #define IXP4XX_ETH_NPEB 0x10
- #define IXP4XX_ETH_NPEC 0x20
-
-+#define IXP4XX_ETH_PHY_MAX_ADDR 32
-+
- /* Information about built-in Ethernet MAC interfaces */
- struct eth_plat_info {
- u8 phy; /* MII PHY ID, 0 - 31 */
- u8 rxq; /* configurable, currently 0 - 31 only */
- u8 txreadyq;
- u8 hwaddr[6];
-+
-+ u32 phy_mask;
-+#if 0
-+ int speed;
-+ int duplex;
-+#else
-+ int speed_10;
-+ int half_duplex;
-+#endif
- };
-
- /* Information about built-in HSS (synchronous serial) interfaces */
---- a/drivers/net/arm/ixp4xx_eth.c
-+++ b/drivers/net/arm/ixp4xx_eth.c
-@@ -417,6 +417,37 @@ static int ixp4xx_phy_connect(struct net
- struct eth_plat_info *plat = port->plat;
- char phy_id[MII_BUS_ID_SIZE + 3];
-
-+ if (plat->phy == IXP4XX_ETH_PHY_MAX_ADDR) {
-+#if 0
-+ switch (plat->speed) {
-+ case SPEED_10:
-+ case SPEED_100:
-+ break;
-+ default:
-+ printk(KERN_ERR "%s: invalid speed (%d)\n",
-+ dev->name, plat->speed);
-+ return -EINVAL;
-+ }
-+
-+ switch (plat->duplex) {
-+ case DUPLEX_HALF:
-+ case DUPLEX_FULL:
-+ break;
-+ default:
-+ printk(KERN_ERR "%s: invalid duplex mode (%d)\n",
-+ dev->name, plat->duplex);
-+ return -EINVAL;
-+ }
-+ port->speed = plat->speed;
-+ port->duplex = plat->duplex;
-+#else
-+ port->speed = plat->speed_10 ? SPEED_10 : SPEED_100;
-+ port->duplex = plat->half_duplex ? DUPLEX_HALF : DUPLEX_FULL;
-+#endif
-+
-+ return 0;
-+ }
-+
- snprintf(phy_id, MII_BUS_ID_SIZE + 3, PHY_ID_FMT, "0", plat->phy);
- port->phydev = phy_connect(dev, phy_id, &ixp4xx_adjust_link, 0,
- PHY_INTERFACE_MODE_MII);
-@@ -438,21 +469,32 @@ static void ixp4xx_phy_disconnect(struct
- {
- struct port *port = netdev_priv(dev);
-
-- phy_disconnect(port->phydev);
-+ if (port->phydev)
-+ phy_disconnect(port->phydev);
- }
-
- static void ixp4xx_phy_start(struct net_device *dev)
- {
- struct port *port = netdev_priv(dev);
-
-- phy_start(port->phydev);
-+ if (port->phydev) {
-+ phy_start(port->phydev);
-+ } else {
-+ port->link = 1;
-+ ixp4xx_update_link(dev);
-+ }
- }
-
- static void ixp4xx_phy_stop(struct net_device *dev)
- {
- struct port *port = netdev_priv(dev);
-
-- phy_stop(port->phydev);
-+ if (port->phydev) {
-+ phy_stop(port->phydev);
-+ } else {
-+ port->link = 0;
-+ ixp4xx_update_link(dev);
-+ }
- }
-
- static inline void debug_pkt(struct net_device *dev, const char *func,
-@@ -826,6 +868,10 @@ static int eth_ioctl(struct net_device *
-
- if (!netif_running(dev))
- return -EINVAL;
-+
-+ if (!port->phydev)
-+ return -EOPNOTSUPP;
-+
- return phy_mii_ioctl(port->phydev, if_mii(req), cmd);
- }
-
-@@ -845,18 +891,30 @@ static void ixp4xx_get_drvinfo(struct ne
- static int ixp4xx_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
- {
- struct port *port = netdev_priv(dev);
-+
-+ if (!port->phydev)
-+ return -EOPNOTSUPP;
-+
- return phy_ethtool_gset(port->phydev, cmd);
- }
-
- static int ixp4xx_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
- {
- struct port *port = netdev_priv(dev);
-+
-+ if (!port->phydev)
-+ return -EOPNOTSUPP;
-+
- return phy_ethtool_sset(port->phydev, cmd);
- }
-
- static int ixp4xx_nway_reset(struct net_device *dev)
- {
- struct port *port = netdev_priv(dev);
-+
-+ if (!port->phydev)
-+ return -EOPNOTSUPP;
-+
- return phy_start_aneg(port->phydev);
- }
-
diff --git a/target/linux/ixp4xx/patches-2.6.35/295-latch_led_driver.patch b/target/linux/ixp4xx/patches-2.6.35/295-latch_led_driver.patch
deleted file mode 100644
index 0468c958c..000000000
--- a/target/linux/ixp4xx/patches-2.6.35/295-latch_led_driver.patch
+++ /dev/null
@@ -1,201 +0,0 @@
---- a/drivers/leds/Kconfig
-+++ b/drivers/leds/Kconfig
-@@ -157,6 +157,13 @@ config LEDS_LP3944
- To compile this driver as a module, choose M here: the
- module will be called leds-lp3944.
-
-+config LEDS_LATCH
-+ tristate "LED Support for Memory Latched LEDs"
-+ depends on LEDS_CLASS
-+ help
-+ -- To Do --
-+
-+
- config LEDS_CLEVO_MAIL
- tristate "Mail LED on Clevo notebook"
- depends on LEDS_CLASS && X86 && SERIO_I8042 && DMI
---- /dev/null
-+++ b/drivers/leds/leds-latch.c
-@@ -0,0 +1,149 @@
-+/*
-+ * LEDs driver for Memory Latched Devices
-+ *
-+ * Copyright (C) 2008 Gateworks Corp.
-+ * Chris Lang <clang@gateworks.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+#include <linux/kernel.h>
-+#include <linux/slab.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+#include <linux/leds.h>
-+#include <linux/workqueue.h>
-+#include <asm/io.h>
-+#include <linux/spinlock.h>
-+
-+static unsigned int mem_keep = 0xFF;
-+static spinlock_t mem_lock;
-+static unsigned char *iobase;
-+
-+struct latch_led_data {
-+ struct led_classdev cdev;
-+ struct work_struct work;
-+ u8 new_level;
-+ u8 bit;
-+ void (*set_led)(u8 bit, enum led_brightness value);
-+};
-+
-+static void latch_set_led(u8 bit, enum led_brightness value)
-+{
-+ if (value == LED_OFF)
-+ mem_keep |= (0x1 << bit);
-+ else
-+ mem_keep &= ~(0x1 << bit);
-+
-+ writeb(mem_keep, iobase);
-+}
-+
-+static void latch_led_set(struct led_classdev *led_cdev,
-+ enum led_brightness value)
-+{
-+ struct latch_led_data *led_dat =
-+ container_of(led_cdev, struct latch_led_data, cdev);
-+
-+ raw_spin_lock(mem_lock);
-+
-+ led_dat->set_led(led_dat->bit, value);
-+
-+ raw_spin_unlock(mem_lock);
-+}
-+
-+static int latch_led_probe(struct platform_device *pdev)
-+{
-+ struct latch_led_platform_data *pdata = pdev->dev.platform_data;
-+ struct latch_led *cur_led;
-+ struct latch_led_data *leds_data, *led_dat;
-+ int i, ret = 0;
-+
-+ if (!pdata)
-+ return -EBUSY;
-+
-+ leds_data = kzalloc(sizeof(struct latch_led_data) * pdata->num_leds,
-+ GFP_KERNEL);
-+ if (!leds_data)
-+ return -ENOMEM;
-+
-+ for (i = 0; i < pdata->num_leds; i++) {
-+ cur_led = &pdata->leds[i];
-+ led_dat = &leds_data[i];
-+
-+ led_dat->cdev.name = cur_led->name;
-+ led_dat->cdev.default_trigger = cur_led->default_trigger;
-+ led_dat->cdev.brightness_set = latch_led_set;
-+ led_dat->cdev.brightness = LED_OFF;
-+ led_dat->bit = cur_led->bit;
-+ led_dat->set_led = pdata->set_led ? pdata->set_led : latch_set_led;
-+
-+ ret = led_classdev_register(&pdev->dev, &led_dat->cdev);
-+ if (ret < 0) {
-+ goto err;
-+ }
-+ }
-+
-+ if (!pdata->set_led) {
-+ iobase = ioremap_nocache(pdata->mem, 0x1000);
-+ writeb(0xFF, iobase);
-+ }
-+ platform_set_drvdata(pdev, leds_data);
-+
-+ return 0;
-+
-+err:
-+ if (i > 0) {
-+ for (i = i - 1; i >= 0; i--) {
-+ led_classdev_unregister(&leds_data[i].cdev);
-+ }
-+ }
-+
-+ kfree(leds_data);
-+
-+ return ret;
-+}
-+
-+static int __devexit latch_led_remove(struct platform_device *pdev)
-+{
-+ int i;
-+ struct latch_led_platform_data *pdata = pdev->dev.platform_data;
-+ struct latch_led_data *leds_data;
-+
-+ leds_data = platform_get_drvdata(pdev);
-+
-+ for (i = 0; i < pdata->num_leds; i++) {
-+ led_classdev_unregister(&leds_data[i].cdev);
-+ cancel_work_sync(&leds_data[i].work);
-+ }
-+
-+ kfree(leds_data);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver latch_led_driver = {
-+ .probe = latch_led_probe,
-+ .remove = __devexit_p(latch_led_remove),
-+ .driver = {
-+ .name = "leds-latch",
-+ .owner = THIS_MODULE,
-+ },
-+};
-+
-+static int __init latch_led_init(void)
-+{
-+ return platform_driver_register(&latch_led_driver);
-+}
-+
-+static void __exit latch_led_exit(void)
-+{
-+ platform_driver_unregister(&latch_led_driver);
-+}
-+
-+module_init(latch_led_init);
-+module_exit(latch_led_exit);
-+
-+MODULE_AUTHOR("Chris Lang <clang@gateworks.com>");
-+MODULE_DESCRIPTION("Latch LED driver");
-+MODULE_LICENSE("GPL");
---- a/drivers/leds/Makefile
-+++ b/drivers/leds/Makefile
-@@ -20,6 +20,7 @@ obj-$(CONFIG_LEDS_COBALT_RAQ) += leds-c
- obj-$(CONFIG_LEDS_SUNFIRE) += leds-sunfire.o
- obj-$(CONFIG_LEDS_PCA9532) += leds-pca9532.o
- obj-$(CONFIG_LEDS_GPIO) += leds-gpio.o
-+obj-$(CONFIG_LEDS_LATCH) += leds-latch.o
- obj-$(CONFIG_LEDS_LP3944) += leds-lp3944.o
- obj-$(CONFIG_LEDS_CLEVO_MAIL) += leds-clevo-mail.o
- obj-$(CONFIG_LEDS_HP6XX) += leds-hp6xx.o
---- a/include/linux/leds.h
-+++ b/include/linux/leds.h
-@@ -161,5 +161,19 @@ struct gpio_led_platform_data {
- unsigned long *delay_off);
- };
-
-+/* For the leds-latch driver */
-+struct latch_led {
-+ const char *name;
-+ char *default_trigger;
-+ unsigned bit;
-+};
-+
-+struct latch_led_platform_data {
-+ int num_leds;
-+ u32 mem;
-+ struct latch_led *leds;
-+ void (*set_led)(u8 bit, enum led_brightness value);
-+};
-+
-
- #endif /* __LINUX_LEDS_H_INCLUDED */
diff --git a/target/linux/ixp4xx/patches-2.6.35/300-avila_fetch_mac.patch b/target/linux/ixp4xx/patches-2.6.35/300-avila_fetch_mac.patch
deleted file mode 100644
index 8cbd38d4e..000000000
--- a/target/linux/ixp4xx/patches-2.6.35/300-avila_fetch_mac.patch
+++ /dev/null
@@ -1,242 +0,0 @@
---- a/arch/arm/mach-ixp4xx/avila-setup.c
-+++ b/arch/arm/mach-ixp4xx/avila-setup.c
-@@ -14,9 +14,14 @@
- #include <linux/kernel.h>
- #include <linux/init.h>
- #include <linux/device.h>
-+#include <linux/if_ether.h>
-+#include <linux/socket.h>
-+#include <linux/netdevice.h>
- #include <linux/serial.h>
- #include <linux/tty.h>
- #include <linux/serial_8250.h>
-+#include <linux/i2c.h>
-+#include <linux/i2c/at24.h>
- #include <linux/i2c-gpio.h>
- #include <asm/types.h>
- #include <asm/setup.h>
-@@ -30,6 +35,13 @@
- #define AVILA_SDA_PIN 7
- #define AVILA_SCL_PIN 6
-
-+struct avila_board_info {
-+ unsigned char *model;
-+ void (*setup)(void);
-+};
-+
-+static struct avila_board_info *avila_info __initdata;
-+
- static struct flash_platform_data avila_flash_data = {
- .map_name = "cfi_probe",
- .width = 2,
-@@ -133,16 +145,181 @@ static struct platform_device avila_pata
- .resource = avila_pata_resources,
- };
-
-+/* Built-in 10/100 Ethernet MAC interfaces */
-+static struct eth_plat_info avila_npeb_data = {
-+ .phy = 0,
-+ .rxq = 3,
-+ .txreadyq = 20,
-+};
-+
-+static struct eth_plat_info avila_npec_data = {
-+ .phy = 1,
-+ .rxq = 4,
-+ .txreadyq = 21,
-+};
-+
-+static struct platform_device avila_npeb_device = {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEB,
-+ .dev.platform_data = &avila_npeb_data,
-+};
-+
-+static struct platform_device avila_npec_device = {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEC,
-+ .dev.platform_data = &avila_npec_data,
-+};
-+
- static struct platform_device *avila_devices[] __initdata = {
- &avila_i2c_gpio,
- &avila_flash,
- &avila_uart
- };
-
-+static void __init avila_gw23xx_setup(void)
-+{
-+ platform_device_register(&avila_npeb_device);
-+ platform_device_register(&avila_npec_device);
-+}
-+
-+static void __init avila_gw2342_setup(void)
-+{
-+ platform_device_register(&avila_npeb_device);
-+ platform_device_register(&avila_npec_device);
-+}
-+
-+static void __init avila_gw2345_setup(void)
-+{
-+ avila_npeb_data.phy = IXP4XX_ETH_PHY_MAX_ADDR;
-+ avila_npeb_data.phy_mask = 0x1e; /* ports 1-4 of the KS8995 switch */
-+ platform_device_register(&avila_npeb_device);
-+
-+ avila_npec_data.phy = 5; /* port 5 of the KS8995 switch */
-+ platform_device_register(&avila_npec_device);
-+}
-+
-+static void __init avila_gw2347_setup(void)
-+{
-+ platform_device_register(&avila_npeb_device);
-+}
-+
-+static void __init avila_gw2348_setup(void)
-+{
-+ platform_device_register(&avila_npeb_device);
-+ platform_device_register(&avila_npec_device);
-+}
-+
-+static void __init avila_gw2353_setup(void)
-+{
-+ platform_device_register(&avila_npeb_device);
-+}
-+
-+static void __init avila_gw2355_setup(void)
-+{
-+ avila_npeb_data.phy = IXP4XX_ETH_PHY_MAX_ADDR;
-+ avila_npeb_data.phy_mask = 0x1e; /* ports 1-4 of the KS8995 switch */
-+ platform_device_register(&avila_npeb_device);
-+
-+ avila_npec_data.phy = 16;
-+ platform_device_register(&avila_npec_device);
-+}
-+
-+static void __init avila_gw2357_setup(void)
-+{
-+ platform_device_register(&avila_npeb_device);
-+}
-+
-+static struct avila_board_info avila_boards[] __initdata = {
-+ {
-+ .model = "GW2342",
-+ .setup = avila_gw2342_setup,
-+ }, {
-+ .model = "GW2345",
-+ .setup = avila_gw2345_setup,
-+ }, {
-+ .model = "GW2347",
-+ .setup = avila_gw2347_setup,
-+ }, {
-+ .model = "GW2348",
-+ .setup = avila_gw2348_setup,
-+ }, {
-+ .model = "GW2353",
-+ .setup = avila_gw2353_setup,
-+ }, {
-+ .model = "GW2355",
-+ .setup = avila_gw2355_setup,
-+ }, {
-+ .model = "GW2357",
-+ .setup = avila_gw2357_setup,
-+ }
-+};
-+
-+static struct avila_board_info * __init avila_find_board_info(char *model)
-+{
-+ int i;
-+ model[6] = '\0';
-+
-+ for (i = 0; i < ARRAY_SIZE(avila_boards); i++) {
-+ struct avila_board_info *info = &avila_boards[i];
-+ if (strcmp(info->model, model) == 0)
-+ return info;
-+ }
-+
-+ return NULL;
-+}
-+
-+static struct memory_accessor *at24_mem_acc;
-+
-+static void at24_setup(struct memory_accessor *mem_acc, void *context)
-+{
-+ char mac_addr[ETH_ALEN];
-+ char model[7];
-+
-+ at24_mem_acc = mem_acc;
-+
-+ /* Read MAC addresses */
-+ if (at24_mem_acc->read(at24_mem_acc, mac_addr, 0x0, 6) == 6) {
-+ memcpy(&avila_npeb_data.hwaddr, mac_addr, ETH_ALEN);
-+ }
-+ if (at24_mem_acc->read(at24_mem_acc, mac_addr, 0x6, 6) == 6) {
-+ memcpy(&avila_npec_data.hwaddr, mac_addr, ETH_ALEN);
-+ }
-+
-+ /* Read the first 6 bytes of the model number */
-+ if (at24_mem_acc->read(at24_mem_acc, model, 0x20, 6) == 6) {
-+ avila_info = avila_find_board_info(model);
-+ }
-+
-+}
-+
-+static struct at24_platform_data avila_eeprom_info = {
-+ .byte_len = 1024,
-+ .page_size = 16,
-+ .flags = AT24_FLAG_READONLY,
-+ .setup = at24_setup,
-+};
-+
-+static struct i2c_board_info __initdata avila_i2c_board_info[] = {
-+ {
-+ I2C_BOARD_INFO("ds1672", 0x68),
-+ },
-+ {
-+ I2C_BOARD_INFO("ad7418", 0x28),
-+ },
-+ {
-+ I2C_BOARD_INFO("24c08", 0x51),
-+ .platform_data = &avila_eeprom_info
-+ },
-+};
-+
- static void __init avila_init(void)
- {
- ixp4xx_sys_init();
-
-+ /*
-+ * These devices are present on all Avila models and don't need any
-+ * model specific setup.
-+ */
- avila_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
- avila_flash_resource.end =
- IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
-@@ -160,7 +337,28 @@ static void __init avila_init(void)
-
- platform_device_register(&avila_pata);
-
-+ i2c_register_board_info(0, avila_i2c_board_info,
-+ ARRAY_SIZE(avila_i2c_board_info));
-+}
-+
-+static int __init avila_model_setup(void)
-+{
-+ if (!machine_is_avila())
-+ return 0;
-+
-+ if (avila_info) {
-+ printk(KERN_DEBUG "Running on Gateworks Avila %s\n",
-+ avila_info->model);
-+ avila_info->setup();
-+ } else {
-+ printk(KERN_INFO "Unknown/missing Avila model number"
-+ " -- defaults will be used\n");
-+ avila_gw23xx_setup();
-+ }
-+
-+ return 0;
- }
-+late_initcall(avila_model_setup);
-
- MACHINE_START(AVILA, "Gateworks Avila Network Platform")
- /* Maintainer: Deepak Saxena <dsaxena@plexity.net> */
diff --git a/target/linux/ixp4xx/patches-2.6.35/301-avila_led.patch b/target/linux/ixp4xx/patches-2.6.35/301-avila_led.patch
deleted file mode 100644
index 9acf3fda6..000000000
--- a/target/linux/ixp4xx/patches-2.6.35/301-avila_led.patch
+++ /dev/null
@@ -1,161 +0,0 @@
---- a/arch/arm/mach-ixp4xx/avila-setup.c
-+++ b/arch/arm/mach-ixp4xx/avila-setup.c
-@@ -22,6 +22,7 @@
- #include <linux/serial_8250.h>
- #include <linux/i2c.h>
- #include <linux/i2c/at24.h>
-+#include <linux/leds.h>
- #include <linux/i2c-gpio.h>
- #include <asm/types.h>
- #include <asm/setup.h>
-@@ -170,6 +171,72 @@ static struct platform_device avila_npec
- .dev.platform_data = &avila_npec_data,
- };
-
-+static struct gpio_led avila_gpio_leds[] = {
-+ {
-+ .name = "user", /* green led */
-+ .gpio = AVILA_GW23XX_LED_USER_GPIO,
-+ .active_low = 1,
-+ }
-+};
-+
-+static struct gpio_led_platform_data avila_gpio_leds_data = {
-+ .num_leds = 1,
-+ .leds = avila_gpio_leds,
-+};
-+
-+static struct platform_device avila_gpio_leds_device = {
-+ .name = "leds-gpio",
-+ .id = -1,
-+ .dev.platform_data = &avila_gpio_leds_data,
-+};
-+
-+static struct latch_led avila_latch_leds[] = {
-+ {
-+ .name = "led0", /* green led */
-+ .bit = 0,
-+ },
-+ {
-+ .name = "led1", /* green led */
-+ .bit = 1,
-+ },
-+ {
-+ .name = "led2", /* green led */
-+ .bit = 2,
-+ },
-+ {
-+ .name = "led3", /* green led */
-+ .bit = 3,
-+ },
-+ {
-+ .name = "led4", /* green led */
-+ .bit = 4,
-+ },
-+ {
-+ .name = "led5", /* green led */
-+ .bit = 5,
-+ },
-+ {
-+ .name = "led6", /* green led */
-+ .bit = 6,
-+ },
-+ {
-+ .name = "led7", /* green led */
-+ .bit = 7,
-+ }
-+};
-+
-+static struct latch_led_platform_data avila_latch_leds_data = {
-+ .num_leds = 8,
-+ .leds = avila_latch_leds,
-+ .mem = 0x51000000,
-+};
-+
-+static struct platform_device avila_latch_leds_device = {
-+ .name = "leds-latch",
-+ .id = -1,
-+ .dev.platform_data = &avila_latch_leds_data,
-+};
-+
- static struct platform_device *avila_devices[] __initdata = {
- &avila_i2c_gpio,
- &avila_flash,
-@@ -180,12 +247,16 @@ static void __init avila_gw23xx_setup(vo
- {
- platform_device_register(&avila_npeb_device);
- platform_device_register(&avila_npec_device);
-+
-+ platform_device_register(&avila_gpio_leds_device);
- }
-
- static void __init avila_gw2342_setup(void)
- {
- platform_device_register(&avila_npeb_device);
- platform_device_register(&avila_npec_device);
-+
-+ platform_device_register(&avila_gpio_leds_device);
- }
-
- static void __init avila_gw2345_setup(void)
-@@ -196,22 +267,30 @@ static void __init avila_gw2345_setup(vo
-
- avila_npec_data.phy = 5; /* port 5 of the KS8995 switch */
- platform_device_register(&avila_npec_device);
-+
-+ platform_device_register(&avila_gpio_leds_device);
- }
-
- static void __init avila_gw2347_setup(void)
- {
- platform_device_register(&avila_npeb_device);
-+
-+ avila_gpio_leds[0].gpio = AVILA_GW23X7_LED_USER_GPIO;
-+ platform_device_register(&avila_gpio_leds_device);
- }
-
- static void __init avila_gw2348_setup(void)
- {
- platform_device_register(&avila_npeb_device);
- platform_device_register(&avila_npec_device);
-+
-+ platform_device_register(&avila_gpio_leds_device);
- }
-
- static void __init avila_gw2353_setup(void)
- {
- platform_device_register(&avila_npeb_device);
-+ platform_device_register(&avila_gpio_leds_device);
- }
-
- static void __init avila_gw2355_setup(void)
-@@ -222,11 +301,29 @@ static void __init avila_gw2355_setup(vo
-
- avila_npec_data.phy = 16;
- platform_device_register(&avila_npec_device);
-+
-+ platform_device_register(&avila_gpio_leds_device);
-+
-+ *IXP4XX_EXP_CS4 |= 0xbfff3c03;
-+ avila_latch_leds[0].name = "RXD";
-+ avila_latch_leds[1].name = "TXD";
-+ avila_latch_leds[2].name = "POL";
-+ avila_latch_leds[3].name = "LNK";
-+ avila_latch_leds[4].name = "ERR";
-+ avila_latch_leds_data.num_leds = 5;
-+ avila_latch_leds_data.mem = 0x54000000;
-+ platform_device_register(&avila_latch_leds_device);
- }
-
- static void __init avila_gw2357_setup(void)
- {
- platform_device_register(&avila_npeb_device);
-+
-+ avila_gpio_leds[0].gpio = AVILA_GW23X7_LED_USER_GPIO;
-+ platform_device_register(&avila_gpio_leds_device);
-+
-+ *IXP4XX_EXP_CS1 |= 0xbfff3c03;
-+ platform_device_register(&avila_latch_leds_device);
- }
-
- static struct avila_board_info avila_boards[] __initdata = {
diff --git a/target/linux/ixp4xx/patches-2.6.35/302-avila_gpio_device.patch b/target/linux/ixp4xx/patches-2.6.35/302-avila_gpio_device.patch
deleted file mode 100644
index f941a94bc..000000000
--- a/target/linux/ixp4xx/patches-2.6.35/302-avila_gpio_device.patch
+++ /dev/null
@@ -1,16 +0,0 @@
---- a/arch/arm/mach-ixp4xx/avila-setup.c
-+++ b/arch/arm/mach-ixp4xx/avila-setup.c
-@@ -38,6 +38,13 @@
- #define AVILA_SDA_PIN 7
- #define AVILA_SCL_PIN 6
-
-+/* User LEDs */
-+#define AVILA_GW23XX_LED_USER_GPIO 3
-+#define AVILA_GW23X7_LED_USER_GPIO 4
-+
-+/* gpio mask used by platform device */
-+#define AVILA_GPIO_MASK (1 << 1) | (1 << 3) | (1 << 5) | (1 << 7) | (1 << 9)
-+
- struct avila_board_info {
- unsigned char *model;
- void (*setup)(void);
diff --git a/target/linux/ixp4xx/patches-2.6.35/304-ixp4xx_eth_jumboframe.patch b/target/linux/ixp4xx/patches-2.6.35/304-ixp4xx_eth_jumboframe.patch
deleted file mode 100644
index a9cbddcf5..000000000
--- a/target/linux/ixp4xx/patches-2.6.35/304-ixp4xx_eth_jumboframe.patch
+++ /dev/null
@@ -1,80 +0,0 @@
---- a/drivers/net/arm/ixp4xx_eth.c
-+++ b/drivers/net/arm/ixp4xx_eth.c
-@@ -52,7 +52,7 @@
-
- #define POOL_ALLOC_SIZE (sizeof(struct desc) * (RX_DESCS + TX_DESCS))
- #define REGS_SIZE 0x1000
--#define MAX_MRU 1536 /* 0x600 */
-+#define MAX_MRU (14320 - ETH_HLEN - ETH_FCS_LEN)
- #define RX_BUFF_SIZE ALIGN((NET_IP_ALIGN) + MAX_MRU, 4)
-
- #define NAPI_WEIGHT 16
-@@ -1061,6 +1061,32 @@ static void destroy_queues(struct port *
- }
- }
-
-+static int eth_do_change_mtu(struct net_device *dev, int mtu)
-+{
-+ struct port *port;
-+ struct msg msg;
-+ /* adjust for ethernet headers */
-+ int framesize = mtu + ETH_HLEN + ETH_FCS_LEN;
-+
-+ port = netdev_priv(dev);
-+
-+ memset(&msg, 0, sizeof(msg));
-+ msg.cmd = NPE_SETMAXFRAMELENGTHS;
-+ msg.eth_id = port->id;
-+
-+ /* max rx/tx 64 byte blocks */
-+ msg.byte2 = ((framesize + 63) / 64) << 8;
-+ msg.byte3 = ((framesize + 63) / 64) << 8;
-+
-+ msg.byte4 = msg.byte6 = framesize >> 8;
-+ msg.byte5 = msg.byte7 = framesize & 0xff;
-+
-+ if (npe_send_recv_message(port->npe, &msg, "ETH_SET_MAX_FRAME_LENGTH"))
-+ return -EIO;
-+
-+ return 0;
-+}
-+
- static int eth_open(struct net_device *dev)
- {
- struct port *port = netdev_priv(dev);
-@@ -1112,6 +1138,8 @@ static int eth_open(struct net_device *d
- if (npe_send_recv_message(port->npe, &msg, "ETH_SET_FIREWALL_MODE"))
- return -EIO;
-
-+ eth_do_change_mtu(dev, dev->mtu);
-+
- if ((err = request_queues(port)) != 0)
- return err;
-
-@@ -1251,7 +1279,26 @@ static int eth_close(struct net_device *
- return 0;
- }
-
-+static int ixp_eth_change_mtu(struct net_device *dev, int mtu)
-+{
-+ int ret;
-+
-+ if (mtu > MAX_MRU)
-+ return -EINVAL;
-+
-+ if (dev->flags & IFF_UP) {
-+ ret = eth_do_change_mtu(dev, mtu);
-+ if (ret < 0)
-+ return ret;
-+ }
-+
-+ dev->mtu = mtu;
-+
-+ return 0;
-+}
-+
- static const struct net_device_ops ixp4xx_netdev_ops = {
-+ .ndo_change_mtu = ixp_eth_change_mtu,
- .ndo_open = eth_open,
- .ndo_stop = eth_close,
- .ndo_start_xmit = eth_xmit,
diff --git a/target/linux/ixp4xx/patches-2.6.35/310-gtwx5717_spi_bus.patch b/target/linux/ixp4xx/patches-2.6.35/310-gtwx5717_spi_bus.patch
deleted file mode 100644
index 080b96ac8..000000000
--- a/target/linux/ixp4xx/patches-2.6.35/310-gtwx5717_spi_bus.patch
+++ /dev/null
@@ -1,52 +0,0 @@
---- a/arch/arm/mach-ixp4xx/gtwx5715-setup.c
-+++ b/arch/arm/mach-ixp4xx/gtwx5715-setup.c
-@@ -27,6 +27,7 @@
- #include <linux/serial.h>
- #include <linux/tty.h>
- #include <linux/serial_8250.h>
-+#include <linux/spi/spi_gpio_old.h>
- #include <asm/types.h>
- #include <asm/setup.h>
- #include <asm/memory.h>
-@@ -146,9 +147,41 @@ static struct platform_device gtwx5715_f
- .resource = &gtwx5715_flash_resource,
- };
-
-+static int gtwx5715_spi_boardinfo_setup(struct spi_board_info *bi,
-+ struct spi_master *master, void *data)
-+{
-+
-+ strlcpy(bi->modalias, "spi-ks8995", sizeof(bi->modalias));
-+
-+ bi->max_speed_hz = 5000000 /* Hz */;
-+ bi->bus_num = master->bus_num;
-+ bi->mode = SPI_MODE_0;
-+
-+ return 0;
-+}
-+
-+static struct spi_gpio_platform_data gtwx5715_spi_bus_data = {
-+ .pin_cs = GTWX5715_KSSPI_SELECT,
-+ .pin_clk = GTWX5715_KSSPI_CLOCK,
-+ .pin_miso = GTWX5715_KSSPI_RXD,
-+ .pin_mosi = GTWX5715_KSSPI_TXD,
-+ .cs_activelow = 1,
-+ .no_spi_delay = 1,
-+ .boardinfo_setup = gtwx5715_spi_boardinfo_setup,
-+};
-+
-+static struct platform_device gtwx5715_spi_bus = {
-+ .name = "spi-gpio",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = &gtwx5715_spi_bus_data,
-+ },
-+};
-+
- static struct platform_device *gtwx5715_devices[] __initdata = {
- &gtwx5715_uart_device,
- &gtwx5715_flash,
-+ &gtwx5715_spi_bus,
- };
-
- static void __init gtwx5715_init(void)
diff --git a/target/linux/ixp4xx/patches-2.6.35/311-gtwx5717_mac_plat_info.patch b/target/linux/ixp4xx/patches-2.6.35/311-gtwx5717_mac_plat_info.patch
deleted file mode 100644
index 8ce79e4d0..000000000
--- a/target/linux/ixp4xx/patches-2.6.35/311-gtwx5717_mac_plat_info.patch
+++ /dev/null
@@ -1,40 +0,0 @@
---- a/arch/arm/mach-ixp4xx/gtwx5715-setup.c
-+++ b/arch/arm/mach-ixp4xx/gtwx5715-setup.c
-@@ -179,10 +179,37 @@ static struct platform_device gtwx5715_s
- },
- };
-
-+static struct eth_plat_info gtwx5715_npeb_data = {
-+ .phy = IXP4XX_ETH_PHY_MAX_ADDR,
-+ .phy_mask = 0x1e, /* ports 1-4 of the KS8995 switch */
-+ .rxq = 3,
-+ .txreadyq = 20,
-+};
-+
-+static struct eth_plat_info gtwx5715_npec_data = {
-+ .phy = 5, /* port 5 of the KS8995 switch */
-+ .rxq = 4,
-+ .txreadyq = 21,
-+};
-+
-+static struct platform_device gtwx5715_npeb_device = {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEB,
-+ .dev.platform_data = &gtwx5715_npeb_data,
-+};
-+
-+static struct platform_device gtwx5715_npec_device = {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEC,
-+ .dev.platform_data = &gtwx5715_npec_data,
-+};
-+
- static struct platform_device *gtwx5715_devices[] __initdata = {
- &gtwx5715_uart_device,
- &gtwx5715_flash,
- &gtwx5715_spi_bus,
-+ &gtwx5715_npeb_device,
-+ &gtwx5715_npec_device,
- };
-
- static void __init gtwx5715_init(void)
diff --git a/target/linux/ixp4xx/patches-2.6.35/312-ixp4xx_pata_optimization.patch b/target/linux/ixp4xx/patches-2.6.35/312-ixp4xx_pata_optimization.patch
deleted file mode 100644
index 3bf1b7497..000000000
--- a/target/linux/ixp4xx/patches-2.6.35/312-ixp4xx_pata_optimization.patch
+++ /dev/null
@@ -1,137 +0,0 @@
---- a/drivers/ata/pata_ixp4xx_cf.c
-+++ b/drivers/ata/pata_ixp4xx_cf.c
-@@ -24,16 +24,58 @@
- #include <scsi/scsi_host.h>
-
- #define DRV_NAME "pata_ixp4xx_cf"
--#define DRV_VERSION "0.2"
-+#define DRV_VERSION "0.3"
-
- static int ixp4xx_set_mode(struct ata_link *link, struct ata_device **error)
- {
- struct ata_device *dev;
-+ struct ixp4xx_pata_data *data = link->ap->host->dev->platform_data;
-+ unsigned int pio_mask;
-
- ata_for_each_dev(dev, link, ENABLED) {
-- ata_dev_printk(dev, KERN_INFO, "configured for PIO0\n");
-- dev->pio_mode = XFER_PIO_0;
-- dev->xfer_mode = XFER_PIO_0;
-+ if (dev->id[ATA_ID_FIELD_VALID] & (1 << 1)) {
-+ pio_mask = dev->id[ATA_ID_PIO_MODES] & 0x03;
-+ if (pio_mask & (1 << 1)) {
-+ pio_mask = 4;
-+ } else {
-+ pio_mask = 3;
-+ }
-+ } else {
-+ pio_mask = (dev->id[ATA_ID_OLD_PIO_MODES] >> 8);
-+ }
-+
-+ switch (pio_mask){
-+ case 0:
-+ ata_dev_printk(dev, KERN_INFO, "configured for PIO0\n");
-+ dev->pio_mode = XFER_PIO_0;
-+ dev->xfer_mode = XFER_PIO_0;
-+ *data->cs0_cfg = 0x8a473c03;
-+ break;
-+ case 1:
-+ ata_dev_printk(dev, KERN_INFO, "configured for PIO1\n");
-+ dev->pio_mode = XFER_PIO_1;
-+ dev->xfer_mode = XFER_PIO_1;
-+ *data->cs0_cfg = 0x86433c03;
-+ break;
-+ case 2:
-+ ata_dev_printk(dev, KERN_INFO, "configured for PIO2\n");
-+ dev->pio_mode = XFER_PIO_2;
-+ dev->xfer_mode = XFER_PIO_2;
-+ *data->cs0_cfg = 0x82413c03;
-+ break;
-+ case 3:
-+ ata_dev_printk(dev, KERN_INFO, "configured for PIO3\n");
-+ dev->pio_mode = XFER_PIO_3;
-+ dev->xfer_mode = XFER_PIO_3;
-+ *data->cs0_cfg = 0x80823c03;
-+ break;
-+ case 4:
-+ ata_dev_printk(dev, KERN_INFO, "configured for PIO4\n");
-+ dev->pio_mode = XFER_PIO_4;
-+ dev->xfer_mode = XFER_PIO_4;
-+ *data->cs0_cfg = 0x80403c03;
-+ break;
-+ }
- dev->xfer_shift = ATA_SHIFT_PIO;
- dev->flags |= ATA_DFLAG_PIO;
- }
-@@ -46,6 +88,7 @@ static unsigned int ixp4xx_mmio_data_xfe
- unsigned int i;
- unsigned int words = buflen >> 1;
- u16 *buf16 = (u16 *) buf;
-+ unsigned int pio_mask;
- struct ata_port *ap = dev->link->ap;
- void __iomem *mmio = ap->ioaddr.data_addr;
- struct ixp4xx_pata_data *data = ap->host->dev->platform_data;
-@@ -53,8 +96,34 @@ static unsigned int ixp4xx_mmio_data_xfe
- /* set the expansion bus in 16bit mode and restore
- * 8 bit mode after the transaction.
- */
-- *data->cs0_cfg &= ~(0x01);
-- udelay(100);
-+ if (dev->id[ATA_ID_FIELD_VALID] & (1 << 1)){
-+ pio_mask = dev->id[ATA_ID_PIO_MODES] & 0x03;
-+ if (pio_mask & (1 << 1)){
-+ pio_mask = 4;
-+ }else{
-+ pio_mask = 3;
-+ }
-+ }else{
-+ pio_mask = (dev->id[ATA_ID_OLD_PIO_MODES] >> 8);
-+ }
-+ switch (pio_mask){
-+ case 0:
-+ *data->cs0_cfg = 0xa9643c42;
-+ break;
-+ case 1:
-+ *data->cs0_cfg = 0x85033c42;
-+ break;
-+ case 2:
-+ *data->cs0_cfg = 0x80b23c42;
-+ break;
-+ case 3:
-+ *data->cs0_cfg = 0x80823c42;
-+ break;
-+ case 4:
-+ *data->cs0_cfg = 0x80403c42;
-+ break;
-+ }
-+ udelay(5);
-
- /* Transfer multiple of 2 bytes */
- if (rw == READ)
-@@ -79,8 +148,24 @@ static unsigned int ixp4xx_mmio_data_xfe
- words++;
- }
-
-- udelay(100);
-- *data->cs0_cfg |= 0x01;
-+ udelay(5);
-+ switch (pio_mask){
-+ case 0:
-+ *data->cs0_cfg = 0x8a473c03;
-+ break;
-+ case 1:
-+ *data->cs0_cfg = 0x86433c03;
-+ break;
-+ case 2:
-+ *data->cs0_cfg = 0x82413c03;
-+ break;
-+ case 3:
-+ *data->cs0_cfg = 0x80823c03;
-+ break;
-+ case 4:
-+ *data->cs0_cfg = 0x80403c03;
-+ break;
-+ }
-
- return words << 1;
- }
diff --git a/target/linux/ixp4xx/patches-2.6.35/402-ixp4xx_gpiolib.patch b/target/linux/ixp4xx/patches-2.6.35/402-ixp4xx_gpiolib.patch
deleted file mode 100644
index 0d5a25378..000000000
--- a/target/linux/ixp4xx/patches-2.6.35/402-ixp4xx_gpiolib.patch
+++ /dev/null
@@ -1,125 +0,0 @@
---- a/arch/arm/mach-ixp4xx/common.c
-+++ b/arch/arm/mach-ixp4xx/common.c
-@@ -36,6 +36,7 @@
- #include <asm/pgtable.h>
- #include <asm/page.h>
- #include <asm/irq.h>
-+#include <asm/gpio.h>
-
- #include <asm/mach/map.h>
- #include <asm/mach/irq.h>
-@@ -375,12 +376,39 @@ static struct platform_device *ixp46x_de
- unsigned long ixp4xx_exp_bus_size;
- EXPORT_SYMBOL(ixp4xx_exp_bus_size);
-
-+static int ixp4xx_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
-+{
-+ gpio_line_config(gpio, IXP4XX_GPIO_IN);
-+ return 0;
-+}
-+EXPORT_SYMBOL(ixp4xx_gpio_direction_input);
-+
-+static int ixp4xx_gpio_direction_output(struct gpio_chip *chip, unsigned gpio, int level)
-+{
-+ gpio_line_set(gpio, level);
-+ gpio_line_config(gpio, IXP4XX_GPIO_OUT);
-+ return 0;
-+}
-+EXPORT_SYMBOL(ixp4xx_gpio_direction_output);
-+
-+static struct gpio_chip ixp4xx_gpio_chip = {
-+ .label = "IXP4XX_GPIO_CHIP",
-+ .direction_input = ixp4xx_gpio_direction_input,
-+ .direction_output = ixp4xx_gpio_direction_output,
-+ .get = gpio_get_value,
-+ .set = gpio_set_value,
-+ .base = 0,
-+ .ngpio = 16,
-+};
-+
- void __init ixp4xx_sys_init(void)
- {
- ixp4xx_exp_bus_size = SZ_16M;
-
- platform_add_devices(ixp4xx_devices, ARRAY_SIZE(ixp4xx_devices));
-
-+ gpiochip_add(&ixp4xx_gpio_chip);
-+
- if (cpu_is_ixp46x()) {
- int region;
-
---- a/arch/arm/Kconfig
-+++ b/arch/arm/Kconfig
-@@ -417,6 +417,7 @@ config ARCH_IXP4XX
- select GENERIC_GPIO
- select GENERIC_TIME
- select GENERIC_CLOCKEVENTS
-+ select ARCH_REQUIRE_GPIOLIB
- help
- Support for Intel's IXP4XX (XScale) family of processors.
-
---- a/arch/arm/mach-ixp4xx/include/mach/gpio.h
-+++ b/arch/arm/mach-ixp4xx/include/mach/gpio.h
-@@ -27,47 +27,31 @@
-
- #include <linux/kernel.h>
- #include <mach/hardware.h>
-+#include <asm-generic/gpio.h> /* cansleep wrappers */
-
--static inline int gpio_request(unsigned gpio, const char *label)
--{
-- return 0;
--}
--
--static inline void gpio_free(unsigned gpio)
--{
-- might_sleep();
--
-- return;
--}
--
--static inline int gpio_direction_input(unsigned gpio)
--{
-- gpio_line_config(gpio, IXP4XX_GPIO_IN);
-- return 0;
--}
--
--static inline int gpio_direction_output(unsigned gpio, int level)
--{
-- gpio_line_set(gpio, level);
-- gpio_line_config(gpio, IXP4XX_GPIO_OUT);
-- return 0;
--}
-+#define NR_BUILTIN_GPIO 16
-
- static inline int gpio_get_value(unsigned gpio)
- {
-- int value;
--
-- gpio_line_get(gpio, &value);
--
-- return value;
-+ if (gpio < NR_BUILTIN_GPIO)
-+ {
-+ int value;
-+ gpio_line_get(gpio, &value);
-+ return value;
-+ }
-+ else
-+ return __gpio_get_value(gpio);
- }
-
- static inline void gpio_set_value(unsigned gpio, int value)
- {
-- gpio_line_set(gpio, value);
-+ if (gpio < NR_BUILTIN_GPIO)
-+ gpio_line_set(gpio, value);
-+ else
-+ __gpio_set_value(gpio, value);
- }
-
--#include <asm-generic/gpio.h> /* cansleep wrappers */
-+#define gpio_cansleep __gpio_cansleep
-
- extern int gpio_to_irq(int gpio);
- extern int irq_to_gpio(unsigned int irq);
diff --git a/target/linux/ixp4xx/patches-2.6.35/500-usr8200_support.patch b/target/linux/ixp4xx/patches-2.6.35/500-usr8200_support.patch
deleted file mode 100644
index 2d78425f4..000000000
--- a/target/linux/ixp4xx/patches-2.6.35/500-usr8200_support.patch
+++ /dev/null
@@ -1,342 +0,0 @@
---- a/arch/arm/mach-ixp4xx/Kconfig
-+++ b/arch/arm/mach-ixp4xx/Kconfig
-@@ -97,6 +97,14 @@ config MACH_SIDEWINDER
- Engineering Sidewinder board. For more information on this
- platform, see http://www.adiengineering.com
-
-+config MACH_USR8200
-+ bool "USRobotics USR8200"
-+ select PCI
-+ help
-+ Say 'Y' here if you want your kernel to support the USRobotics
-+ USR8200 router board. For more information on this platform, see
-+ http://openwrt.org
-+
- config MACH_COMPEX
- bool "Compex WP18 / NP18A"
- select PCI
---- a/arch/arm/mach-ixp4xx/Makefile
-+++ b/arch/arm/mach-ixp4xx/Makefile
-@@ -25,6 +25,7 @@ obj-pci-$(CONFIG_MACH_WRT300NV2) += wrt
- obj-pci-$(CONFIG_MACH_AP1000) += ixdp425-pci.o
- obj-pci-$(CONFIG_MACH_TW5334) += tw5334-pci.o
- obj-pci-$(CONFIG_MACH_MI424WR) += mi424wr-pci.o
-+obj-pci-$(CONFIG_MACH_USR8200) += usr8200-pci.o
-
- obj-y += common.o
-
-@@ -49,6 +50,7 @@ obj-$(CONFIG_MACH_WRT300NV2) += wrt300nv
- obj-$(CONFIG_MACH_AP1000) += ap1000-setup.o
- obj-$(CONFIG_MACH_TW5334) += tw5334-setup.o
- obj-$(CONFIG_MACH_MI424WR) += mi424wr-setup.o
-+obj-$(CONFIG_MACH_USR8200) += usr8200-setup.o
-
- obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o
- obj-$(CONFIG_IXP4XX_QMGR) += ixp4xx_qmgr.o
---- /dev/null
-+++ b/arch/arm/mach-ixp4xx/usr8200-pci.c
-@@ -0,0 +1,78 @@
-+/*
-+ * arch/arch/mach-ixp4xx/usr8200-pci.c
-+ *
-+ * PCI setup routines for USRobotics USR8200
-+ *
-+ * Copyright (C) 2008 Peter Denison <openwrt@marshadder.org>
-+ *
-+ * based on pronghorn-pci.c
-+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-+ * based on coyote-pci.c:
-+ * Copyright (C) 2002 Jungo Software Technologies.
-+ * Copyright (C) 2003 MontaVista Softwrae, Inc.
-+ *
-+ * Maintainer: Peter Denison <openwrt@marshadder.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/pci.h>
-+#include <linux/init.h>
-+#include <linux/irq.h>
-+
-+#include <asm/mach-types.h>
-+#include <mach/hardware.h>
-+
-+#include <asm/mach/pci.h>
-+
-+void __init usr8200_pci_preinit(void)
-+{
-+ set_irq_type(IRQ_IXP4XX_GPIO7, IRQ_TYPE_LEVEL_LOW);
-+ set_irq_type(IRQ_IXP4XX_GPIO8, IRQ_TYPE_LEVEL_LOW);
-+ set_irq_type(IRQ_IXP4XX_GPIO9, IRQ_TYPE_LEVEL_LOW);
-+ set_irq_type(IRQ_IXP4XX_GPIO10, IRQ_TYPE_LEVEL_LOW);
-+ set_irq_type(IRQ_IXP4XX_GPIO11, IRQ_TYPE_LEVEL_LOW);
-+
-+ ixp4xx_pci_preinit();
-+}
-+
-+static int __init usr8200_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+ if (slot == 14)
-+ return IRQ_IXP4XX_GPIO7;
-+ else if (slot == 15)
-+ return IRQ_IXP4XX_GPIO8;
-+ else if (slot == 16) {
-+ if (pin == 1)
-+ return IRQ_IXP4XX_GPIO11;
-+ else if (pin == 2)
-+ return IRQ_IXP4XX_GPIO10;
-+ else if (pin == 3)
-+ return IRQ_IXP4XX_GPIO9;
-+ else
-+ return -1;
-+ } else
-+ return -1;
-+}
-+
-+struct hw_pci usr8200_pci __initdata = {
-+ .nr_controllers = 1,
-+ .preinit = usr8200_pci_preinit,
-+ .swizzle = pci_std_swizzle,
-+ .setup = ixp4xx_setup,
-+ .scan = ixp4xx_scan_bus,
-+ .map_irq = usr8200_map_irq,
-+};
-+
-+int __init usr8200_pci_init(void)
-+{
-+ if (machine_is_usr8200())
-+ pci_common_init(&usr8200_pci);
-+ return 0;
-+}
-+
-+subsys_initcall(usr8200_pci_init);
---- /dev/null
-+++ b/arch/arm/mach-ixp4xx/usr8200-setup.c
-@@ -0,0 +1,212 @@
-+/*
-+ * arch/arm/mach-ixp4xx/usr8200-setup.c
-+ *
-+ * Board setup for the USRobotics USR8200
-+ *
-+ * Copyright (C) 2008 Peter Denison <openwrt@marshadder.org>
-+ *
-+ * based on pronghorn-setup.c:
-+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-+ * based on coyote-setup.c:
-+ * Copyright (C) 2003-2005 MontaVista Software, Inc.
-+ *
-+ * Author: Peter Denison <openwrt@marshadder.org>
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/device.h>
-+#include <linux/serial.h>
-+#include <linux/tty.h>
-+#include <linux/serial_8250.h>
-+#include <linux/slab.h>
-+#include <linux/types.h>
-+#include <linux/memory.h>
-+#include <linux/i2c-gpio.h>
-+#include <linux/leds.h>
-+
-+#include <asm/setup.h>
-+#include <mach/hardware.h>
-+#include <asm/irq.h>
-+#include <asm/mach-types.h>
-+#include <asm/mach/arch.h>
-+#include <asm/mach/flash.h>
-+
-+static struct flash_platform_data usr8200_flash_data = {
-+ .map_name = "cfi_probe",
-+ .width = 2,
-+};
-+
-+static struct resource usr8200_flash_resource = {
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct platform_device usr8200_flash = {
-+ .name = "IXP4XX-Flash",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = &usr8200_flash_data,
-+ },
-+ .num_resources = 1,
-+ .resource = &usr8200_flash_resource,
-+};
-+
-+static struct resource usr8200_uart_resources [] = {
-+ {
-+ .start = IXP4XX_UART2_BASE_PHYS,
-+ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM
-+ },
-+ {
-+ .start = IXP4XX_UART1_BASE_PHYS,
-+ .end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM
-+ }
-+};
-+
-+static struct plat_serial8250_port usr8200_uart_data[] = {
-+ {
-+ .mapbase = IXP4XX_UART2_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART2,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ {
-+ .mapbase = IXP4XX_UART1_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART1,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ { },
-+};
-+
-+static struct platform_device usr8200_uart = {
-+ .name = "serial8250",
-+ .id = PLAT8250_DEV_PLATFORM,
-+ .dev = {
-+ .platform_data = usr8200_uart_data,
-+ },
-+ .num_resources = 2,
-+ .resource = usr8200_uart_resources,
-+};
-+
-+static struct gpio_led usr8200_led_pin[] = {
-+ {
-+ .name = "usr8200:usb1",
-+ .gpio = 0,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "usr8200:usb2",
-+ .gpio = 1,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "usr8200:ieee1394",
-+ .gpio = 2,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "usr8200:internal",
-+ .gpio = 3,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "usr8200:power",
-+ .gpio = 14,
-+ }
-+};
-+
-+static struct gpio_led_platform_data usr8200_led_data = {
-+ .num_leds = ARRAY_SIZE(usr8200_led_pin),
-+ .leds = usr8200_led_pin,
-+};
-+
-+static struct platform_device usr8200_led = {
-+ .name = "leds-gpio",
-+ .id = -1,
-+ .dev.platform_data = &usr8200_led_data,
-+};
-+
-+static struct eth_plat_info usr8200_plat_eth[] = {
-+ { /* NPEC - LAN with Marvell 88E6060 switch */
-+ .phy = IXP4XX_ETH_PHY_MAX_ADDR,
-+ .phy_mask = 0x0F0000,
-+ .rxq = 4,
-+ .txreadyq = 21,
-+ }, { /* NPEB - WAN */
-+ .phy = 9,
-+ .rxq = 3,
-+ .txreadyq = 20,
-+ }
-+};
-+
-+static struct platform_device usr8200_eth[] = {
-+ {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEC,
-+ .dev.platform_data = usr8200_plat_eth,
-+ }, {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEB,
-+ .dev.platform_data = usr8200_plat_eth + 1,
-+ }
-+};
-+
-+static struct resource usr8200_rtc_resources = {
-+ .flags = IORESOURCE_MEM
-+};
-+
-+static struct platform_device usr8200_rtc = {
-+ .name = "rtc7301",
-+ .id = 0,
-+ .num_resources = 1,
-+ .resource = &usr8200_rtc_resources,
-+};
-+
-+static struct platform_device *usr8200_devices[] __initdata = {
-+ &usr8200_flash,
-+ &usr8200_uart,
-+ &usr8200_led,
-+ &usr8200_eth[0],
-+ &usr8200_eth[1],
-+ &usr8200_rtc,
-+};
-+
-+static void __init usr8200_init(void)
-+{
-+ ixp4xx_sys_init();
-+
-+ usr8200_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-+ usr8200_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_16M - 1;
-+
-+ usr8200_rtc_resources.start = IXP4XX_EXP_BUS_BASE(2);
-+ usr8200_rtc_resources.end = IXP4XX_EXP_BUS_BASE(2) + 0x01ff;
-+
-+ *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
-+ *IXP4XX_EXP_CS2 = 0x3fff000 | IXP4XX_EXP_BUS_SIZE(0) | IXP4XX_EXP_BUS_WR_EN |
-+ IXP4XX_EXP_BUS_CS_EN | IXP4XX_EXP_BUS_BYTE_EN;
-+ *IXP4XX_GPIO_GPCLKR = 0x01100000;
-+
-+ /* configure button as input */
-+ gpio_line_config(12, IXP4XX_GPIO_IN);
-+
-+ platform_add_devices(usr8200_devices, ARRAY_SIZE(usr8200_devices));
-+}
-+
-+MACHINE_START(USR8200, "USRobotics USR8200")
-+ /* Maintainer: Peter Denison <openwrt@marshadder.org> */
-+ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
-+ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
-+ .map_io = ixp4xx_map_io,
-+ .init_irq = ixp4xx_init_irq,
-+ .timer = &ixp4xx_timer,
-+ .boot_params = 0x0100,
-+ .init_machine = usr8200_init,
-+MACHINE_END
---- a/arch/arm/mach-ixp4xx/include/mach/uncompress.h
-+++ b/arch/arm/mach-ixp4xx/include/mach/uncompress.h
-@@ -43,7 +43,7 @@ static __inline__ void __arch_decomp_set
- if (machine_is_adi_coyote() || machine_is_gtwx5715() ||
- machine_is_gateway7001() || machine_is_wg302v2() ||
- machine_is_pronghorn() || machine_is_pronghorn_metro() || machine_is_wrt300nv2() ||
-- machine_is_tw5334())
-+ machine_is_tw5334() || machine_is_usr8200())
- uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS;
- else
- uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;
diff --git a/target/linux/ixp4xx/patches-2.6.35/520-tw2662_support.patch b/target/linux/ixp4xx/patches-2.6.35/520-tw2662_support.patch
deleted file mode 100644
index 7bef1d408..000000000
--- a/target/linux/ixp4xx/patches-2.6.35/520-tw2662_support.patch
+++ /dev/null
@@ -1,333 +0,0 @@
---- a/arch/arm/mach-ixp4xx/Kconfig
-+++ b/arch/arm/mach-ixp4xx/Kconfig
-@@ -180,6 +180,15 @@ config ARCH_PRPMC1100
- PrPCM1100 Processor Mezanine Module. For more information on
- this platform, see <file:Documentation/arm/IXP4xx>.
-
-+config MACH_TW2662
-+ bool "Titan Wireless TW-266-2"
-+ select PCI
-+ help
-+ Say 'Y' here if you want your kernel to support the Titan
-+ Wireless TW266-2. For more information on this platform,
-+ see http://openwrt.org
-+
-+
- config MACH_TW5334
- bool "Titan Wireless TW-533-4"
- select PCI
---- a/arch/arm/mach-ixp4xx/Makefile
-+++ b/arch/arm/mach-ixp4xx/Makefile
-@@ -23,6 +23,7 @@ obj-pci-$(CONFIG_MACH_SIDEWINDER) += sid
- obj-pci-$(CONFIG_MACH_COMPEX) += ixdp425-pci.o
- obj-pci-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-pci.o
- obj-pci-$(CONFIG_MACH_AP1000) += ixdp425-pci.o
-+obj-pci-$(CONFIG_MACH_TW2662) += tw2662-pci.o
- obj-pci-$(CONFIG_MACH_TW5334) += tw5334-pci.o
- obj-pci-$(CONFIG_MACH_MI424WR) += mi424wr-pci.o
- obj-pci-$(CONFIG_MACH_USR8200) += usr8200-pci.o
-@@ -48,6 +49,7 @@ obj-$(CONFIG_MACH_SIDEWINDER) += sidewin
- obj-$(CONFIG_MACH_COMPEX) += compex-setup.o
- obj-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-setup.o
- obj-$(CONFIG_MACH_AP1000) += ap1000-setup.o
-+obj-$(CONFIG_MACH_TW2662) += tw2662-setup.o
- obj-$(CONFIG_MACH_TW5334) += tw5334-setup.o
- obj-$(CONFIG_MACH_MI424WR) += mi424wr-setup.o
- obj-$(CONFIG_MACH_USR8200) += usr8200-setup.o
---- a/arch/arm/mach-ixp4xx/include/mach/uncompress.h
-+++ b/arch/arm/mach-ixp4xx/include/mach/uncompress.h
-@@ -43,7 +43,7 @@ static __inline__ void __arch_decomp_set
- if (machine_is_adi_coyote() || machine_is_gtwx5715() ||
- machine_is_gateway7001() || machine_is_wg302v2() ||
- machine_is_pronghorn() || machine_is_pronghorn_metro() || machine_is_wrt300nv2() ||
-- machine_is_tw5334() || machine_is_usr8200())
-+ machine_is_tw5334() || machine_is_usr8200() || machine_is_tw2662())
- uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS;
- else
- uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;
---- /dev/null
-+++ b/arch/arm/mach-ixp4xx/tw2662-pci.c
-@@ -0,0 +1,68 @@
-+/*
-+ * arch/arm/mach-ixp4xx/tw2662-pci.c
-+ *
-+ * PCI setup routines for Tiran Wireless TW-266-2 platform
-+ *
-+ * Copyright (C) 2002 Jungo Software Technologies.
-+ * Copyright (C) 2003 MontaVista Softwrae, Inc.
-+ * Copyright (C) 2010 Alexandros C. Couloumbis <alex@ozo.com>
-+ * Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org>
-+ *
-+ * Maintainer: Deepak Saxena <dsaxena@mvista.com>
-+ * Maintainer: Alexandros C. Couloumbis <alex@ozo.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/pci.h>
-+#include <linux/init.h>
-+#include <linux/irq.h>
-+#include <asm/mach-types.h>
-+#include <mach/hardware.h>
-+#include <asm/irq.h>
-+#include <asm/mach/pci.h>
-+
-+#define SLOT0_DEVID 1
-+#define SLOT1_DEVID 3
-+
-+/* PCI controller GPIO to IRQ pin mappings */
-+#define SLOT0_INTA 11
-+#define SLOT1_INTA 9
-+
-+void __init tw2662_pci_preinit(void)
-+{
-+ set_irq_type(IXP4XX_GPIO_IRQ(SLOT0_INTA), IRQ_TYPE_LEVEL_LOW);
-+ set_irq_type(IXP4XX_GPIO_IRQ(SLOT1_INTA), IRQ_TYPE_LEVEL_LOW);
-+ ixp4xx_pci_preinit();
-+}
-+
-+static int __init tw2662_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+ if (slot == SLOT0_DEVID)
-+ return IXP4XX_GPIO_IRQ(SLOT0_INTA);
-+ else if (slot == SLOT1_DEVID)
-+ return IXP4XX_GPIO_IRQ(SLOT1_INTA);
-+ else return -1;
-+}
-+
-+struct hw_pci tw2662_pci __initdata = {
-+ .nr_controllers = 1,
-+ .preinit = tw2662_pci_preinit,
-+ .swizzle = pci_std_swizzle,
-+ .setup = ixp4xx_setup,
-+ .scan = ixp4xx_scan_bus,
-+ .map_irq = tw2662_map_irq,
-+};
-+
-+int __init tw2662_pci_init(void)
-+{
-+ if (machine_is_tw2662())
-+ pci_common_init(&tw2662_pci);
-+ return 0;
-+}
-+
-+subsys_initcall(tw2662_pci_init);
---- /dev/null
-+++ b/arch/arm/mach-ixp4xx/tw2662-setup.c
-@@ -0,0 +1,212 @@
-+/*
-+ * arch/arm/mach-ixp4xx/tw2662-setup.c
-+ *
-+ * Titan Wireless TW-266-2
-+ *
-+ * Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org>
-+ * Copyright (C) 2010 Alexandros C. Couloumbis <alex@ozo.com>
-+ *
-+ * based on ap1000-setup.c:
-+ * Author: Imre Kaloz <Kaloz@openwrt.org>
-+ */
-+
-+#include <linux/if_ether.h>
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/device.h>
-+#include <linux/serial.h>
-+#include <linux/tty.h>
-+#include <linux/serial_8250.h>
-+#include <linux/slab.h>
-+#include <linux/netdevice.h>
-+#include <linux/etherdevice.h>
-+#include <linux/platform_device.h>
-+
-+#include <asm/io.h>
-+#include <asm/types.h>
-+#include <asm/setup.h>
-+#include <asm/memory.h>
-+#include <mach/hardware.h>
-+#include <asm/mach-types.h>
-+#include <asm/irq.h>
-+#include <asm/mach/arch.h>
-+#include <asm/mach/flash.h>
-+
-+/* gpio mask used by platform device */
-+#define TW2662_GPIO_MASK (1 << 1) | (1 << 3) | (1 << 5) | (1 << 7)
-+
-+static struct flash_platform_data tw2662_flash_data = {
-+ .map_name = "cfi_probe",
-+ .width = 2,
-+};
-+
-+static struct resource tw2662_flash_resource = {
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct platform_device tw2662_flash = {
-+ .name = "IXP4XX-Flash",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = &tw2662_flash_data,
-+ },
-+ .num_resources = 1,
-+ .resource = &tw2662_flash_resource,
-+};
-+
-+static struct resource tw2662_gpio_resources[] = {
-+ {
-+ .name = "gpio",
-+ /* FIXME: gpio mask should be model specific */
-+ .start = TW2662_GPIO_MASK,
-+ .end = TW2662_GPIO_MASK,
-+ .flags = 0,
-+ },
-+};
-+
-+static struct platform_device tw2662_gpio = {
-+ .name = "GPIODEV",
-+ .id = -1,
-+ .num_resources = ARRAY_SIZE(tw2662_gpio_resources),
-+ .resource = tw2662_gpio_resources,
-+};
-+
-+static struct resource tw2662_uart_resources[] = {
-+ {
-+ .start = IXP4XX_UART1_BASE_PHYS,
-+ .end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM
-+ },
-+ {
-+ .start = IXP4XX_UART2_BASE_PHYS,
-+ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM
-+ }
-+};
-+
-+static struct plat_serial8250_port tw2662_uart_data[] = {
-+ {
-+ .mapbase = IXP4XX_UART1_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART1,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ {
-+ .mapbase = IXP4XX_UART2_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART2,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ { },
-+};
-+
-+static struct platform_device tw2662_uart = {
-+ .name = "serial8250",
-+ .id = PLAT8250_DEV_PLATFORM,
-+ .dev.platform_data = tw2662_uart_data,
-+ .num_resources = 2,
-+ .resource = tw2662_uart_resources
-+};
-+
-+/* Built-in 10/100 Ethernet MAC interfaces */
-+static struct eth_plat_info tw2662_plat_eth[] = {
-+ {
-+ .phy = 3,
-+ .rxq = 3,
-+ .txreadyq = 20,
-+ }, {
-+ .phy = 1,
-+ .rxq = 4,
-+ .txreadyq = 21,
-+ }
-+};
-+
-+static struct platform_device tw2662_eth[] = {
-+ {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEB,
-+ .dev.platform_data = tw2662_plat_eth,
-+ }, {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEC,
-+ .dev.platform_data = tw2662_plat_eth + 1,
-+ }
-+};
-+
-+
-+static struct platform_device *tw2662_devices[] __initdata = {
-+ &tw2662_flash,
-+ &tw2662_uart,
-+ &tw2662_gpio,
-+ &tw2662_eth[0],
-+ &tw2662_eth[1],
-+};
-+
-+static char tw2662_mem_fixup[] __initdata = "mem=64M ";
-+
-+static void __init tw2662_fixup(struct machine_desc *desc,
-+ struct tag *tags, char **cmdline, struct meminfo *mi)
-+
-+{
-+ struct tag *t = tags;
-+ char *p = *cmdline;
-+
-+ /* Find the end of the tags table, taking note of any cmdline tag. */
-+ for (; t->hdr.size; t = tag_next(t)) {
-+ if (t->hdr.tag == ATAG_CMDLINE) {
-+ p = t->u.cmdline.cmdline;
-+ }
-+ }
-+
-+ /* Overwrite the end of the table with a new cmdline tag. */
-+ t->hdr.tag = ATAG_CMDLINE;
-+ t->hdr.size = (sizeof (struct tag_header) +
-+ strlen(tw2662_mem_fixup) + strlen(p) + 1 + 4) >> 2;
-+ strlcpy(t->u.cmdline.cmdline, tw2662_mem_fixup, COMMAND_LINE_SIZE);
-+ strlcpy(t->u.cmdline.cmdline + strlen(tw2662_mem_fixup), p,
-+ COMMAND_LINE_SIZE - strlen(tw2662_mem_fixup));
-+
-+ /* Terminate the table. */
-+ t = tag_next(t);
-+ t->hdr.tag = ATAG_NONE;
-+ t->hdr.size = 0;
-+}
-+
-+static void __init tw2662_init(void)
-+{
-+ ixp4xx_sys_init();
-+
-+ tw2662_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-+ tw2662_flash_resource.end =
-+ IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
-+
-+ platform_add_devices(tw2662_devices, ARRAY_SIZE(tw2662_devices));
-+
-+ if (!(is_valid_ether_addr(tw2662_plat_eth[0].hwaddr)))
-+ random_ether_addr(tw2662_plat_eth[0].hwaddr);
-+ if (!(is_valid_ether_addr(tw2662_plat_eth[1].hwaddr))) {
-+ memcpy(tw2662_plat_eth[1].hwaddr, tw2662_plat_eth[0].hwaddr, ETH_ALEN);
-+ tw2662_plat_eth[1].hwaddr[5] = (tw2662_plat_eth[0].hwaddr[5] + 1);
-+ }
-+
-+}
-+
-+#ifdef CONFIG_MACH_TW2662
-+MACHINE_START(TW2662, "Titan Wireless TW-266-2")
-+ /* Maintainer: Alexandros C. Couloumbis <alex@ozo.com> */
-+ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
-+ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
-+ .fixup = tw2662_fixup,
-+ .map_io = ixp4xx_map_io,
-+ .init_irq = ixp4xx_init_irq,
-+ .timer = &ixp4xx_timer,
-+ .boot_params = 0x0100,
-+ .init_machine = tw2662_init,
-+MACHINE_END
-+#endif
diff --git a/target/linux/ixp4xx/patches-2.6.35/600-skb_avoid_dmabounce.patch b/target/linux/ixp4xx/patches-2.6.35/600-skb_avoid_dmabounce.patch
deleted file mode 100644
index 5b0e3fdb8..000000000
--- a/target/linux/ixp4xx/patches-2.6.35/600-skb_avoid_dmabounce.patch
+++ /dev/null
@@ -1,13 +0,0 @@
---- a/net/core/skbuff.c
-+++ b/net/core/skbuff.c
-@@ -183,6 +183,10 @@ struct sk_buff *__alloc_skb(unsigned int
- goto out;
- prefetchw(skb);
-
-+#ifdef CONFIG_ARCH_IXP4XX
-+ gfp_mask |= GFP_DMA;
-+#endif
-+
- size = SKB_DATA_ALIGN(size);
- data = kmalloc_node_track_caller(size + sizeof(struct skb_shared_info),
- gfp_mask, node);
diff --git a/target/linux/ixp4xx/patches-2.6.35/601-arm-dma_free_coherent.patch b/target/linux/ixp4xx/patches-2.6.35/601-arm-dma_free_coherent.patch
deleted file mode 100644
index e26adbf9b..000000000
--- a/target/linux/ixp4xx/patches-2.6.35/601-arm-dma_free_coherent.patch
+++ /dev/null
@@ -1,12 +0,0 @@
---- a/arch/arm/mm/dma-mapping.c
-+++ b/arch/arm/mm/dma-mapping.c
-@@ -381,7 +381,8 @@ EXPORT_SYMBOL(dma_mmap_writecombine);
- */
- void dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, dma_addr_t handle)
- {
-- WARN_ON(irqs_disabled());
-+ if (irqs_disabled()) /* don't want stack dumps for these! */
-+ printk("WARNING: at %s:%d %s()\n", __FILE__, __LINE__, __FUNCTION__);
-
- if (dma_release_from_coherent(dev, get_order(size), cpu_addr))
- return;
diff --git a/target/linux/ixp4xx/patches-2.6.35/603-arm-kluin-array-indexing.patch b/target/linux/ixp4xx/patches-2.6.35/603-arm-kluin-array-indexing.patch
deleted file mode 100644
index 3a8c80d74..000000000
--- a/target/linux/ixp4xx/patches-2.6.35/603-arm-kluin-array-indexing.patch
+++ /dev/null
@@ -1,33 +0,0 @@
---- a/arch/arm/kernel/setup.c
-+++ b/arch/arm/kernel/setup.c
-@@ -323,12 +323,13 @@ static void __init setup_processor(void)
- void cpu_init(void)
- {
- unsigned int cpu = smp_processor_id();
-- struct stack *stk = &stacks[cpu];
-+ struct stack *stk;
-
- if (cpu >= NR_CPUS) {
- printk(KERN_CRIT "CPU%u: bad primary CPU number\n", cpu);
- BUG();
- }
-+ stk = &stacks[cpu];
-
- /*
- * Define the placement constraint for the inline asm directive below.
-@@ -387,13 +388,14 @@ static struct machine_desc * __init setu
-
- static int __init arm_add_memory(unsigned long start, unsigned long size)
- {
-- struct membank *bank = &meminfo.bank[meminfo.nr_banks];
-+ struct membank *bank;
-
- if (meminfo.nr_banks >= NR_BANKS) {
- printk(KERN_CRIT "NR_BANKS too low, "
- "ignoring memory at %#lx\n", start);
- return -EINVAL;
- }
-+ bank = &meminfo.bank[meminfo.nr_banks];
-
- /*
- * Ensure that start/size are aligned to a page boundary.