diff options
| author | florian <florian@3c298f89-4303-0410-b956-a3cf2f4a3e73> | 2011-06-19 20:14:22 +0000 |
|---|---|---|
| committer | florian <florian@3c298f89-4303-0410-b956-a3cf2f4a3e73> | 2011-06-19 20:14:22 +0000 |
| commit | ea57f00705752a4400e9e45a825a151b3a294eed (patch) | |
| tree | bb627deb03c605706db4688f0b6801fc99bf398b /target/linux/brcm63xx | |
| parent | df49c5b247620075704ccf6bbc303c598f4e869d (diff) | |
[brcm63xx] remove support for 2.6.37 and 2.6.38
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27233 3c298f89-4303-0410-b956-a3cf2f4a3e73
Diffstat (limited to 'target/linux/brcm63xx')
79 files changed, 0 insertions, 10073 deletions
diff --git a/target/linux/brcm63xx/config-2.6.37 b/target/linux/brcm63xx/config-2.6.37 deleted file mode 100644 index ab2fdb10b..000000000 --- a/target/linux/brcm63xx/config-2.6.37 +++ /dev/null @@ -1,160 +0,0 @@ -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_ARCH_HIBERNATION_POSSIBLE=y -# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set -CONFIG_ARCH_POPULATES_NODE_MAP=y -CONFIG_ARCH_REQUIRE_GPIOLIB=y -# CONFIG_ARCH_SUPPORTS_MSI is not set -CONFIG_ARCH_SUPPORTS_OPROFILE=y -CONFIG_ARCH_SUSPEND_POSSIBLE=y -CONFIG_AUDIT=y -CONFIG_AUDIT_GENERIC=y -# CONFIG_AUTO_IRQ_AFFINITY is not set -CONFIG_BCM63XX=y -CONFIG_BCM63XX_CPU_6338=y -CONFIG_BCM63XX_CPU_6345=y -CONFIG_BCM63XX_CPU_6348=y -CONFIG_BCM63XX_CPU_6358=y -CONFIG_BCM63XX_ENET=y -CONFIG_BCM63XX_PHY=y -CONFIG_BCM63XX_WDT=y -CONFIG_BKL=y -CONFIG_BOARD_BCM963XX=y -# CONFIG_BOARD_LIVEBOX is not set -CONFIG_BSD_PROCESS_ACCT_V3=y -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_CEVT_R4K=y -CONFIG_CEVT_R4K_LIB=y -CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200" -CONFIG_CMDLINE_BOOL=y -# CONFIG_CMDLINE_OVERRIDE is not set -CONFIG_CPU_BIG_ENDIAN=y -CONFIG_CPU_HAS_PREFETCH=y -CONFIG_CPU_HAS_SYNC=y -CONFIG_CPU_MIPS32=y -CONFIG_CPU_MIPS32_R1=y -CONFIG_CPU_MIPSR1=y -CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_HIGHMEM=y -CONFIG_CRAMFS=y -CONFIG_CSRC_R4K=y -CONFIG_CSRC_R4K_LIB=y -CONFIG_DECOMPRESS_LZMA=y -CONFIG_DMA_NONCOHERENT=y -CONFIG_EARLY_PRINTK=y -CONFIG_ELF_CORE=y -CONFIG_FIRMWARE_IN_KERNEL=y -CONFIG_GENERIC_ATOMIC64=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -CONFIG_GENERIC_CMOS_UPDATE=y -CONFIG_GENERIC_FIND_LAST_BIT=y -CONFIG_GENERIC_FIND_NEXT_BIT=y -CONFIG_GENERIC_GPIO=y -# CONFIG_GENERIC_HARDIRQS_NO_DEPRECATED is not set -CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y -# CONFIG_GENERIC_PENDING_IRQ is not set -CONFIG_GPIOLIB=y -CONFIG_GPIO_74X164=y -CONFIG_GPIO_DEVICE=y -CONFIG_GPIO_SYSFS=y -# CONFIG_HAMRADIO is not set -# CONFIG_HARDIRQS_SW_RESEND is not set -CONFIG_HARDWARE_WATCHPOINTS=y -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAVE_ARCH_KGDB=y -CONFIG_HAVE_C_RECORDMCOUNT=y -CONFIG_HAVE_DMA_API_DEBUG=y -CONFIG_HAVE_DMA_ATTRS=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y -CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y -CONFIG_HAVE_FUNCTION_TRACER=y -CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y -CONFIG_HAVE_GENERIC_DMA_COHERENT=y -CONFIG_HAVE_GENERIC_HARDIRQS=y -CONFIG_HAVE_IDE=y -CONFIG_HAVE_OPROFILE=y -CONFIG_HAVE_PERF_EVENTS=y -# CONFIG_HAVE_SPARSE_IRQ is not set -CONFIG_HW_HAS_PCI=y -CONFIG_HW_RANDOM=y -CONFIG_HZ=250 -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -CONFIG_IMAGE_CMDLINE_HACK=y -CONFIG_INITRAMFS_SOURCE="" -CONFIG_INOTIFY_USER=y -CONFIG_IP_PIMSM_V1=y -CONFIG_IP_PIMSM_V2=y -CONFIG_IRQ_CPU=y -# CONFIG_IRQ_PER_CPU is not set -CONFIG_KEXEC=y -CONFIG_LEDS_GPIO=y -# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set -CONFIG_LOONGSON_UART_BASE=y -CONFIG_MACH_NO_WESTBRIDGE=y -CONFIG_MIPS=y -CONFIG_MIPS_L1_CACHE_SHIFT=5 -# CONFIG_MIPS_MACHINE is not set -CONFIG_MIPS_MT_DISABLED=y -CONFIG_MODULE_FORCE_LOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_MTD_BCM963XX=y -CONFIG_MTD_CFI_ADV_OPTIONS=y -CONFIG_MTD_CFI_BE_BYTE_SWAP=y -# CONFIG_MTD_CFI_GEOMETRY is not set -# CONFIG_MTD_CFI_NOSWAP is not set -CONFIG_MTD_CFI_STAA=y -CONFIG_MTD_CMDLINE_PARTS=y -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -CONFIG_MTD_CONCAT=y -CONFIG_MTD_JEDECPROBE=y -CONFIG_MTD_REDBOOT_PARTS=y -CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y -CONFIG_NEED_DMA_MAP_STATE=y -CONFIG_NEED_PER_CPU_KM=y -CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -CONFIG_PERF_USE_VMALLOC=y -CONFIG_PHYLIB=y -CONFIG_POSIX_MQUEUE=y -CONFIG_POSIX_MQUEUE_SYSCTL=y -# CONFIG_PREEMPT_RCU is not set -# CONFIG_QUOTACTL is not set -CONFIG_RELAY=y -# CONFIG_SCSI_DMA is not set -# CONFIG_SERIAL_8250 is not set -CONFIG_SERIAL_BCM63XX=y -CONFIG_SERIAL_BCM63XX_CONSOLE=y -CONFIG_SPI=y -# CONFIG_SPI_BCM63XX is not set -CONFIG_SPI_BITBANG=y -CONFIG_SPI_GPIO=y -CONFIG_SPI_MASTER=y -CONFIG_SQUASHFS_EMBEDDED=y -CONFIG_SSB=y -CONFIG_SSB_B43_PCI_BRIDGE=y -CONFIG_SSB_BLOCKIO=y -# CONFIG_SSB_DRIVER_MIPS is not set -CONFIG_SSB_DRIVER_PCICORE=y -CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y -CONFIG_SSB_PCIHOST=y -CONFIG_SSB_PCIHOST_POSSIBLE=y -CONFIG_SSB_SPROM=y -CONFIG_SWAP_IO_SPACE=y -CONFIG_SYS_HAS_CPU_MIPS32_R1=y -CONFIG_SYS_HAS_EARLY_PRINTK=y -CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y -CONFIG_SYS_SUPPORTS_ARBIT_HZ=y -CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y -CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y -CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y -CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y -CONFIG_USB_SUPPORT=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_WATCHDOG_NOWAYOUT=y -CONFIG_ZONE_DMA_FLAG=0 diff --git a/target/linux/brcm63xx/config-2.6.38 b/target/linux/brcm63xx/config-2.6.38 deleted file mode 100644 index f2205eef5..000000000 --- a/target/linux/brcm63xx/config-2.6.38 +++ /dev/null @@ -1,165 +0,0 @@ -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_ARCH_HIBERNATION_POSSIBLE=y -# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set -CONFIG_ARCH_POPULATES_NODE_MAP=y -CONFIG_ARCH_REQUIRE_GPIOLIB=y -# CONFIG_ARCH_SUPPORTS_MSI is not set -CONFIG_ARCH_SUPPORTS_OPROFILE=y -CONFIG_ARCH_SUSPEND_POSSIBLE=y -# CONFIG_ATH79 is not set -CONFIG_AUDIT=y -CONFIG_AUDIT_GENERIC=y -# CONFIG_AUTO_IRQ_AFFINITY is not set -CONFIG_BCM63XX=y -CONFIG_BCM63XX_CPU_6338=y -CONFIG_BCM63XX_CPU_6345=y -CONFIG_BCM63XX_CPU_6348=y -CONFIG_BCM63XX_CPU_6358=y -CONFIG_BCM63XX_ENET=y -CONFIG_BCM63XX_PHY=y -CONFIG_BCM63XX_WDT=y -CONFIG_BOARD_BCM963XX=y -# CONFIG_BOARD_LIVEBOX is not set -CONFIG_BOOTPARAM_HUNG_TASK_PANIC=y -CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=1 -CONFIG_BSD_PROCESS_ACCT_V3=y -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_CEVT_R4K=y -CONFIG_CEVT_R4K_LIB=y -CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200" -CONFIG_CMDLINE_BOOL=y -# CONFIG_CMDLINE_OVERRIDE is not set -CONFIG_CPU_BIG_ENDIAN=y -CONFIG_CPU_HAS_PREFETCH=y -CONFIG_CPU_HAS_SYNC=y -CONFIG_CPU_MIPS32=y -CONFIG_CPU_MIPS32_R1=y -CONFIG_CPU_MIPSR1=y -CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_HIGHMEM=y -CONFIG_CRAMFS=y -CONFIG_CSRC_R4K=y -CONFIG_CSRC_R4K_LIB=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DECOMPRESS_LZMA=y -CONFIG_DETECT_HUNG_TASK=y -CONFIG_DMA_NONCOHERENT=y -CONFIG_EARLY_PRINTK=y -CONFIG_ELF_CORE=y -CONFIG_FIRMWARE_IN_KERNEL=y -CONFIG_GENERIC_ATOMIC64=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -CONFIG_GENERIC_CMOS_UPDATE=y -CONFIG_GENERIC_FIND_LAST_BIT=y -CONFIG_GENERIC_FIND_NEXT_BIT=y -CONFIG_GENERIC_GPIO=y -# CONFIG_GENERIC_HARDIRQS_NO_DEPRECATED is not set -# CONFIG_GENERIC_PENDING_IRQ is not set -CONFIG_GPIOLIB=y -CONFIG_GPIO_74X164=y -CONFIG_GPIO_DEVICE=y -CONFIG_GPIO_SYSFS=y -# CONFIG_HAMRADIO is not set -# CONFIG_HARDIRQS_SW_RESEND is not set -CONFIG_HARDWARE_WATCHPOINTS=y -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAVE_ARCH_JUMP_LABEL=y -CONFIG_HAVE_ARCH_KGDB=y -CONFIG_HAVE_C_RECORDMCOUNT=y -CONFIG_HAVE_DMA_API_DEBUG=y -CONFIG_HAVE_DMA_ATTRS=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y -CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y -CONFIG_HAVE_FUNCTION_TRACER=y -CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y -CONFIG_HAVE_GENERIC_DMA_COHERENT=y -CONFIG_HAVE_GENERIC_HARDIRQS=y -CONFIG_HAVE_IDE=y -CONFIG_HAVE_IRQ_WORK=y -CONFIG_HAVE_OPROFILE=y -CONFIG_HAVE_PERF_EVENTS=y -# CONFIG_HAVE_SPARSE_IRQ is not set -CONFIG_HW_HAS_PCI=y -CONFIG_HW_RANDOM=y -CONFIG_HZ=250 -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -CONFIG_IMAGE_CMDLINE_HACK=y -CONFIG_INITRAMFS_SOURCE="" -CONFIG_INOTIFY_USER=y -CONFIG_IP_PIMSM_V1=y -CONFIG_IP_PIMSM_V2=y -CONFIG_IRQ_CPU=y -# CONFIG_IRQ_PER_CPU is not set -CONFIG_KEXEC=y -CONFIG_LEDS_GPIO=y -CONFIG_MACH_NO_WESTBRIDGE=y -CONFIG_MIPS=y -CONFIG_MIPS_L1_CACHE_SHIFT=5 -# CONFIG_MIPS_MACHINE is not set -CONFIG_MIPS_MT_DISABLED=y -CONFIG_MODULE_FORCE_LOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_MTD_BCM963XX=y -CONFIG_MTD_CFI_ADV_OPTIONS=y -CONFIG_MTD_CFI_BE_BYTE_SWAP=y -# CONFIG_MTD_CFI_GEOMETRY is not set -# CONFIG_MTD_CFI_NOSWAP is not set -CONFIG_MTD_CFI_STAA=y -CONFIG_MTD_CMDLINE_PARTS=y -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -CONFIG_MTD_CONCAT=y -CONFIG_MTD_JEDECPROBE=y -CONFIG_MTD_REDBOOT_PARTS=y -CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y -CONFIG_NEED_DMA_MAP_STATE=y -CONFIG_NEED_PER_CPU_KM=y -CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -CONFIG_PERF_USE_VMALLOC=y -CONFIG_PHYLIB=y -CONFIG_POSIX_MQUEUE=y -CONFIG_POSIX_MQUEUE_SYSCTL=y -# CONFIG_PREEMPT_RCU is not set -# CONFIG_QUOTACTL is not set -CONFIG_RELAY=y -# CONFIG_SCSI_DMA is not set -# CONFIG_SERIAL_8250 is not set -CONFIG_SERIAL_BCM63XX=y -CONFIG_SERIAL_BCM63XX_CONSOLE=y -CONFIG_SPI=y -# CONFIG_SPI_BCM63XX is not set -CONFIG_SPI_BITBANG=y -CONFIG_SPI_GPIO=y -CONFIG_SPI_MASTER=y -# CONFIG_SPI_PXA2XX_PCI is not set -CONFIG_SQUASHFS_EMBEDDED=y -CONFIG_SSB=y -CONFIG_SSB_B43_PCI_BRIDGE=y -CONFIG_SSB_BLOCKIO=y -# CONFIG_SSB_DRIVER_MIPS is not set -CONFIG_SSB_DRIVER_PCICORE=y -CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y -CONFIG_SSB_PCIHOST=y -CONFIG_SSB_PCIHOST_POSSIBLE=y -CONFIG_SSB_SPROM=y -CONFIG_SWAP_IO_SPACE=y -CONFIG_SYS_HAS_CPU_MIPS32_R1=y -CONFIG_SYS_HAS_EARLY_PRINTK=y -CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y -CONFIG_SYS_SUPPORTS_ARBIT_HZ=y -CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y -CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y -CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y -CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y -CONFIG_USB_SUPPORT=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_WATCHDOG_NOWAYOUT=y -CONFIG_XZ_DEC=y -CONFIG_ZONE_DMA_FLAG=0 diff --git a/target/linux/brcm63xx/patches-2.6.37/001-6345_cpu.patch b/target/linux/brcm63xx/patches-2.6.37/001-6345_cpu.patch deleted file mode 100644 index 16751e508..000000000 --- a/target/linux/brcm63xx/patches-2.6.37/001-6345_cpu.patch +++ /dev/null @@ -1,74 +0,0 @@ ---- a/arch/mips/bcm63xx/cpu.c -+++ b/arch/mips/bcm63xx/cpu.c -@@ -260,8 +260,10 @@ static unsigned int detect_memory_size(v - unsigned int cols = 0, rows = 0, is_32bits = 0, banks = 0; - u32 val; - -- if (BCMCPU_IS_6345()) -- return (8 * 1024 * 1024); -+ if (BCMCPU_IS_6345()) { -+ val = bcm_sdram_readl(SDRAM_MBASE_REG); -+ return (val * 8 * 1024 * 1024); -+ } - - if (BCMCPU_IS_6338() || BCMCPU_IS_6348()) { - val = bcm_sdram_readl(SDRAM_CFG_REG); ---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h -+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h -@@ -735,6 +735,8 @@ - #define SDRAM_CFG_BANK_SHIFT 13 - #define SDRAM_CFG_BANK_MASK (1 << SDRAM_CFG_BANK_SHIFT) - -+#define SDRAM_MBASE_REG 0xc -+ - #define SDRAM_PRIO_REG 0x2C - #define SDRAM_PRIO_MIPS_SHIFT 29 - #define SDRAM_PRIO_MIPS_MASK (1 << SDRAM_PRIO_MIPS_SHIFT) ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -698,15 +698,9 @@ void __init board_prom_init(void) - char cfe_version[32]; - u32 val; - -- /* read base address of boot chip select (0) -- * 6345 does not have MPI but boots from standard -- * MIPS Flash address */ -- if (BCMCPU_IS_6345()) -- val = 0x1fc00000; -- else { -- val = bcm_mpi_readl(MPI_CSBASE_REG(0)); -- val &= MPI_CSBASE_BASE_MASK; -- } -+ /* read base address of boot chip select (0) */ -+ val = bcm_mpi_readl(MPI_CSBASE_REG(0)); -+ val &= MPI_CSBASE_BASE_MASK; - boot_addr = (u8 *)KSEG1ADDR(val); - - /* dump cfe version */ -@@ -881,12 +875,9 @@ int __init board_register_devices(void) - bcm63xx_dsp_register(&board.dsp); - - /* read base address of boot chip select (0) */ -- if (BCMCPU_IS_6345()) -- val = 0x1fc00000; -- else { -- val = bcm_mpi_readl(MPI_CSBASE_REG(0)); -- val &= MPI_CSBASE_BASE_MASK; -- } -+ val = bcm_mpi_readl(MPI_CSBASE_REG(0)); -+ val &= MPI_CSBASE_BASE_MASK; -+ - mtd_resources[0].start = val; - mtd_resources[0].end = 0x1FFFFFFF; - ---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h -+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h -@@ -163,7 +163,7 @@ enum bcm63xx_regs_set { - #define BCM_6345_ENET0_BASE (0xfffe1800) - #define BCM_6345_ENETDMA_BASE (0xfffe2800) - #define BCM_6345_PCMCIA_BASE (0xfffe2028) --#define BCM_6345_MPI_BASE (0xdeadbeef) -+#define BCM_6345_MPI_BASE (0xfffe2000) - #define BCM_6345_OHCI0_BASE (0xfffe2100) - #define BCM_6345_OHCI_PRIV_BASE (0xfffe2200) - #define BCM_6345_USBH_PRIV_BASE (0xdeadbeef) diff --git a/target/linux/brcm63xx/patches-2.6.37/007-usb-ohci-support.patch b/target/linux/brcm63xx/patches-2.6.37/007-usb-ohci-support.patch deleted file mode 100644 index a70b5012e..000000000 --- a/target/linux/brcm63xx/patches-2.6.37/007-usb-ohci-support.patch +++ /dev/null @@ -1,125 +0,0 @@ -The bcm63xx SOC has an integrated OHCI controller, this patch adds -platform device registration and change board code to register ohci -device when necessary. - -Signed-off-by: Maxime Bizon <mbizon@freebox.fr> ---- - arch/mips/bcm63xx/Kconfig | 6 ++ - arch/mips/bcm63xx/Makefile | 3 +- - arch/mips/bcm63xx/boards/board_bcm963xx.c | 4 ++ - arch/mips/bcm63xx/dev-usb-ohci.c | 49 ++++++++++++++++++++ - .../asm/mach-bcm63xx/bcm63xx_dev_usb_ohci.h | 6 ++ - 5 files changed, 67 insertions(+), 1 deletions(-) - create mode 100644 arch/mips/bcm63xx/dev-usb-ohci.c - create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ohci.h - ---- a/arch/mips/bcm63xx/Kconfig -+++ b/arch/mips/bcm63xx/Kconfig -@@ -16,10 +16,16 @@ config BCM63XX_CPU_6345 - config BCM63XX_CPU_6348 - bool "support 6348 CPU" - select HW_HAS_PCI -+ select USB_ARCH_HAS_OHCI -+ select USB_OHCI_BIG_ENDIAN_DESC -+ select USB_OHCI_BIG_ENDIAN_MMIO - - config BCM63XX_CPU_6358 - bool "support 6358 CPU" - select HW_HAS_PCI -+ select USB_ARCH_HAS_OHCI -+ select USB_OHCI_BIG_ENDIAN_DESC -+ select USB_OHCI_BIG_ENDIAN_MMIO - endmenu - - source "arch/mips/bcm63xx/boards/Kconfig" ---- a/arch/mips/bcm63xx/Makefile -+++ b/arch/mips/bcm63xx/Makefile -@@ -1,5 +1,6 @@ - obj-y += clk.o cpu.o cs.o gpio.o irq.o prom.o setup.o timer.o \ -- dev-dsp.o dev-enet.o dev-pcmcia.o dev-uart.o dev-wdt.o -+ dev-dsp.o dev-enet.o dev-pcmcia.o dev-uart.o dev-wdt.o \ -+ dev-usb-ohci.o - obj-$(CONFIG_EARLY_PRINTK) += early_printk.o - - obj-y += boards/ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -25,6 +25,7 @@ - #include <bcm63xx_dev_enet.h> - #include <bcm63xx_dev_dsp.h> - #include <bcm63xx_dev_pcmcia.h> -+#include <bcm63xx_dev_usb_ohci.h> - #include <board_bcm963xx.h> - - #define PFX "board_bcm963xx: " -@@ -877,6 +878,9 @@ int __init board_register_devices(void) - !board_get_mac_address(board.enet1.mac_addr)) - bcm63xx_enet_register(1, &board.enet1); - -+ if (board.has_ohci0) -+ bcm63xx_ohci_register(); -+ - if (board.has_dsp) - bcm63xx_dsp_register(&board.dsp); - ---- /dev/null -+++ b/arch/mips/bcm63xx/dev-usb-ohci.c -@@ -0,0 +1,49 @@ -+/* -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file "COPYING" in the main directory of this archive -+ * for more details. -+ * -+ * Copyright (C) 2010 Maxime Bizon <mbizon@freebox.fr> -+ */ -+ -+#include <linux/init.h> -+#include <linux/kernel.h> -+#include <linux/platform_device.h> -+#include <bcm63xx_cpu.h> -+#include <bcm63xx_dev_usb_ohci.h> -+ -+static struct resource ohci_resources[] = { -+ { -+ /* start & end filled at runtime */ -+ .flags = IORESOURCE_MEM, -+ }, -+ { -+ /* start filled at runtime */ -+ .flags = IORESOURCE_IRQ, -+ }, -+}; -+ -+static u64 ohci_dmamask = ~(u32)0; -+ -+static struct platform_device bcm63xx_ohci_device = { -+ .name = "bcm63xx_ohci", -+ .id = 0, -+ .num_resources = ARRAY_SIZE(ohci_resources), -+ .resource = ohci_resources, -+ .dev = { -+ .dma_mask = &ohci_dmamask, -+ .coherent_dma_mask = 0xffffffff, -+ }, -+}; -+ -+int __init bcm63xx_ohci_register(void) -+{ -+ if (!BCMCPU_IS_6348() && !BCMCPU_IS_6358()) -+ return 0; -+ -+ ohci_resources[0].start = bcm63xx_regset_address(RSET_OHCI0); -+ ohci_resources[0].end = ohci_resources[0].start; -+ ohci_resources[0].end += RSET_OHCI_SIZE - 1; -+ ohci_resources[1].start = bcm63xx_get_irq_number(IRQ_OHCI0); -+ return platform_device_register(&bcm63xx_ohci_device); -+} ---- /dev/null -+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ohci.h -@@ -0,0 +1,6 @@ -+#ifndef BCM63XX_DEV_USB_OHCI_H_ -+#define BCM63XX_DEV_USB_OHCI_H_ -+ -+int bcm63xx_ohci_register(void); -+ -+#endif /* BCM63XX_DEV_USB_OHCI_H_ */ diff --git a/target/linux/brcm63xx/patches-2.6.37/008-usb-ehci-support.patch b/target/linux/brcm63xx/patches-2.6.37/008-usb-ehci-support.patch deleted file mode 100644 index 0c236f0b7..000000000 --- a/target/linux/brcm63xx/patches-2.6.37/008-usb-ehci-support.patch +++ /dev/null @@ -1,117 +0,0 @@ -The bcm63xx SOC has an integrated EHCI controller, this patch adds -platform device registration and change board code to register -EHCI device when necessary. - -Signed-off-by: Maxime Bizon <mbizon@freebox.fr> ---- - arch/mips/bcm63xx/Kconfig | 2 + - arch/mips/bcm63xx/Makefile | 2 +- - arch/mips/bcm63xx/boards/board_bcm963xx.c | 4 ++ - arch/mips/bcm63xx/dev-usb-ehci.c | 49 ++++++++++++++++++++ - .../asm/mach-bcm63xx/bcm63xx_dev_usb_ehci.h | 6 ++ - 5 files changed, 62 insertions(+), 1 deletions(-) - create mode 100644 arch/mips/bcm63xx/dev-usb-ehci.c - create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ehci.h - ---- a/arch/mips/bcm63xx/Kconfig -+++ b/arch/mips/bcm63xx/Kconfig -@@ -26,6 +26,8 @@ config BCM63XX_CPU_6358 - select USB_ARCH_HAS_OHCI - select USB_OHCI_BIG_ENDIAN_DESC - select USB_OHCI_BIG_ENDIAN_MMIO -+ select USB_ARCH_HAS_EHCI -+ select USB_EHCI_BIG_ENDIAN_MMIO - endmenu - - source "arch/mips/bcm63xx/boards/Kconfig" ---- a/arch/mips/bcm63xx/Makefile -+++ b/arch/mips/bcm63xx/Makefile -@@ -1,6 +1,6 @@ - obj-y += clk.o cpu.o cs.o gpio.o irq.o prom.o setup.o timer.o \ - dev-dsp.o dev-enet.o dev-pcmcia.o dev-uart.o dev-wdt.o \ -- dev-usb-ohci.o -+ dev-usb-ohci.o dev-usb-ehci.o - obj-$(CONFIG_EARLY_PRINTK) += early_printk.o - - obj-y += boards/ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -26,6 +26,7 @@ - #include <bcm63xx_dev_dsp.h> - #include <bcm63xx_dev_pcmcia.h> - #include <bcm63xx_dev_usb_ohci.h> -+#include <bcm63xx_dev_usb_ehci.h> - #include <board_bcm963xx.h> - - #define PFX "board_bcm963xx: " -@@ -878,6 +879,9 @@ int __init board_register_devices(void) - !board_get_mac_address(board.enet1.mac_addr)) - bcm63xx_enet_register(1, &board.enet1); - -+ if (board.has_ehci0) -+ bcm63xx_ehci_register(); -+ - if (board.has_ohci0) - bcm63xx_ohci_register(); - ---- /dev/null -+++ b/arch/mips/bcm63xx/dev-usb-ehci.c -@@ -0,0 +1,49 @@ -+/* -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file "COPYING" in the main directory of this archive -+ * for more details. -+ * -+ * Copyright (C) 2010 Maxime Bizon <mbizon@freebox.fr> -+ */ -+ -+#include <linux/init.h> -+#include <linux/kernel.h> -+#include <linux/platform_device.h> -+#include <bcm63xx_cpu.h> -+#include <bcm63xx_dev_usb_ehci.h> -+ -+static struct resource ehci_resources[] = { -+ { -+ /* start & end filled at runtime */ -+ .flags = IORESOURCE_MEM, -+ }, -+ { -+ /* start filled at runtime */ -+ .flags = IORESOURCE_IRQ, -+ }, -+}; -+ -+static u64 ehci_dmamask = ~(u32)0; -+ -+static struct platform_device bcm63xx_ehci_device = { -+ .name = "bcm63xx_ehci", -+ .id = 0, -+ .num_resources = ARRAY_SIZE(ehci_resources), -+ .resource = ehci_resources, -+ .dev = { -+ .dma_mask = &ehci_dmamask, -+ .coherent_dma_mask = 0xffffffff, -+ }, -+}; -+ -+int __init bcm63xx_ehci_register(void) -+{ -+ if (!BCMCPU_IS_6358()) -+ return 0; -+ -+ ehci_resources[0].start = bcm63xx_regset_address(RSET_EHCI0); -+ ehci_resources[0].end = ehci_resources[0].start; -+ ehci_resources[0].end += RSET_EHCI_SIZE - 1; -+ ehci_resources[1].start = bcm63xx_get_irq_number(IRQ_EHCI0); -+ return platform_device_register(&bcm63xx_ehci_device); -+} ---- /dev/null -+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ehci.h -@@ -0,0 +1,6 @@ -+#ifndef BCM63XX_DEV_USB_EHCI_H_ -+#define BCM63XX_DEV_USB_EHCI_H_ -+ -+int bcm63xx_ehci_register(void); -+ -+#endif /* BCM63XX_DEV_USB_EHCI_H_ */ diff --git a/target/linux/brcm63xx/patches-2.6.37/010-add_bcm63xx_ohci_controller.patch b/target/linux/brcm63xx/patches-2.6.37/010-add_bcm63xx_ohci_controller.patch deleted file mode 100644 index a7a66ecd5..000000000 --- a/target/linux/brcm63xx/patches-2.6.37/010-add_bcm63xx_ohci_controller.patch +++ /dev/null @@ -1,202 +0,0 @@ -Signed-off-by: Maxime Bizon <mbizon@freebox.fr> ---- - drivers/usb/host/ohci-bcm63xx.c | 166 +++++++++++++++++++++++++++++++++++++++ - drivers/usb/host/ohci-hcd.c | 5 + - drivers/usb/host/ohci.h | 2 +- - 3 files changed, 172 insertions(+), 1 deletions(-) - create mode 100644 drivers/usb/host/ohci-bcm63xx.c - ---- /dev/null -+++ b/drivers/usb/host/ohci-bcm63xx.c -@@ -0,0 +1,166 @@ -+/* -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file "COPYING" in the main directory of this archive -+ * for more details. -+ * -+ * Copyright (C) 2010 Maxime Bizon <mbizon@freebox.fr> -+ */ -+ -+#include <linux/init.h> -+#include <linux/clk.h> -+#include <linux/platform_device.h> -+#include <bcm63xx_cpu.h> -+#include <bcm63xx_regs.h> -+#include <bcm63xx_io.h> -+ -+static struct clk *usb_host_clock; -+ -+static int __devinit ohci_bcm63xx_start(struct usb_hcd *hcd) -+{ -+ struct ohci_hcd *ohci = hcd_to_ohci(hcd); -+ int ret; -+ -+ /* -+ * port 2 can be shared with USB slave, but all boards seem to -+ * have only one host port populated, so we can hardcode it -+ */ -+ ohci->num_ports = 1; -+ -+ ret = ohci_init(ohci); -+ if (ret < 0) -+ return ret; -+ -+ ret = ohci_run(ohci); -+ if (ret < 0) { -+ err("can't start %s", hcd->self.bus_name); -+ ohci_stop(hcd); -+ return ret; -+ } -+ return 0; -+} -+ -+static const struct hc_driver ohci_bcm63xx_hc_driver = { -+ .description = hcd_name, -+ .product_desc = "BCM63XX integrated OHCI controller", -+ .hcd_priv_size = sizeof(struct ohci_hcd), -+ -+ .irq = ohci_irq, -+ .flags = HCD_USB11 | HCD_MEMORY, -+ .start = ohci_bcm63xx_start, -+ .stop = ohci_stop, -+ .shutdown = ohci_shutdown, -+ .urb_enqueue = ohci_urb_enqueue, -+ .urb_dequeue = ohci_urb_dequeue, -+ .endpoint_disable = ohci_endpoint_disable, -+ .get_frame_number = ohci_get_frame, -+ .hub_status_data = ohci_hub_status_data, -+ .hub_control = ohci_hub_control, -+ .start_port_reset = ohci_start_port_reset, -+}; -+ -+static int __devinit ohci_hcd_bcm63xx_drv_probe(struct platform_device *pdev) -+{ -+ struct resource *res_mem; -+ struct usb_hcd *hcd; -+ struct ohci_hcd *ohci; -+ u32 reg; -+ int ret, irq; -+ -+ res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ irq = platform_get_irq(pdev, 0); -+ if (!res_mem || irq < 0) -+ return -ENODEV; -+ -+ if (BCMCPU_IS_6348()) { -+ struct clk *clk; -+ /* enable USB host clock */ -+ clk = clk_get(&pdev->dev, "usbh"); -+ if (IS_ERR(clk)) -+ return -ENODEV; -+ -+ clk_enable(clk); -+ usb_host_clock = clk; -+ bcm_rset_writel(RSET_OHCI_PRIV, 0, OHCI_PRIV_REG); -+ -+ } else if (BCMCPU_IS_6358()) { -+ reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_REG); -+ reg &= ~USBH_PRIV_SWAP_OHCI_ENDN_MASK; -+ reg |= USBH_PRIV_SWAP_OHCI_DATA_MASK; -+ bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_REG); -+ /* -+ * The magic value comes for the original vendor BSP -+ * and is needed for USB to work. Datasheet does not -+ * help, so the magic value is used as-is. -+ */ -+ bcm_rset_writel(RSET_USBH_PRIV, 0x1c0020, USBH_PRIV_TEST_REG); -+ } else -+ return 0; -+ -+ hcd = usb_create_hcd(&ohci_bcm63xx_hc_driver, &pdev->dev, "bcm63xx"); -+ if (!hcd) -+ return -ENOMEM; -+ hcd->rsrc_start = res_mem->start; -+ hcd->rsrc_len = res_mem->end - res_mem->start + 1; -+ -+ if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { -+ pr_debug("request_mem_region failed\n"); -+ ret = -EBUSY; -+ goto out; -+ } -+ -+ hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); -+ if (!hcd->regs) { -+ pr_debug("ioremap failed\n"); -+ ret = -EIO; -+ goto out1; -+ } -+ -+ ohci = hcd_to_ohci(hcd); -+ ohci->flags |= OHCI_QUIRK_BE_MMIO | OHCI_QUIRK_BE_DESC | -+ OHCI_QUIRK_FRAME_NO; -+ ohci_hcd_init(ohci); -+ -+ ret = usb_add_hcd(hcd, irq, IRQF_DISABLED); -+ if (ret) -+ goto out2; -+ -+ platform_set_drvdata(pdev, hcd); -+ return 0; -+ -+out2: -+ iounmap(hcd->regs); -+out1: -+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len); -+out: -+ usb_put_hcd(hcd); -+ return ret; -+} -+ -+static int __devexit ohci_hcd_bcm63xx_drv_remove(struct platform_device *pdev) -+{ -+ struct usb_hcd *hcd; -+ -+ hcd = platform_get_drvdata(pdev); -+ usb_remove_hcd(hcd); -+ iounmap(hcd->regs); -+ usb_put_hcd(hcd); -+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len); -+ if (usb_host_clock) { -+ clk_disable(usb_host_clock); -+ clk_put(usb_host_clock); -+ } -+ platform_set_drvdata(pdev, NULL); -+ return 0; -+} -+ -+static struct platform_driver ohci_hcd_bcm63xx_driver = { -+ .probe = ohci_hcd_bcm63xx_drv_probe, -+ .remove = __devexit_p(ohci_hcd_bcm63xx_drv_remove), -+ .shutdown = usb_hcd_platform_shutdown, -+ .driver = { -+ .name = "bcm63xx_ohci", -+ .owner = THIS_MODULE, -+ }, -+}; -+ -+MODULE_ALIAS("platform:bcm63xx_ohci"); ---- a/drivers/usb/host/ohci-hcd.c -+++ b/drivers/usb/host/ohci-hcd.c -@@ -1067,6 +1067,11 @@ MODULE_LICENSE ("GPL"); - #define PLATFORM_DRIVER ohci_hcd_da8xx_driver - #endif - -+#ifdef CONFIG_BCM63XX -+#include "ohci-bcm63xx.c" -+#define PLATFORM_DRIVER ohci_hcd_bcm63xx_driver -+#endif -+ - #if defined(CONFIG_CPU_SUBTYPE_SH7720) || \ - defined(CONFIG_CPU_SUBTYPE_SH7721) || \ - defined(CONFIG_CPU_SUBTYPE_SH7763) || \ ---- a/drivers/usb/host/ohci.h -+++ b/drivers/usb/host/ohci.h -@@ -656,7 +656,7 @@ static inline u32 hc32_to_cpup (const st - * some big-endian SOC implementations. Same thing happens with PSW access. - */ - --#ifdef CONFIG_PPC_MPC52xx -+#if defined(CONFIG_PPC_MPC52xx) || defined(CONFIG_BCM63XX) - #define big_endian_frame_no_quirk(ohci) (ohci->flags & OHCI_QUIRK_FRAME_NO) - #else - #define big_endian_frame_no_quirk(ohci) 0 diff --git a/target/linux/brcm63xx/patches-2.6.37/011-add_bcm63xx_ehci_controller.patch b/target/linux/brcm63xx/patches-2.6.37/011-add_bcm63xx_ehci_controller.patch deleted file mode 100644 index e6e763d99..000000000 --- a/target/linux/brcm63xx/patches-2.6.37/011-add_bcm63xx_ehci_controller.patch +++ /dev/null @@ -1,178 +0,0 @@ -Signed-off-by: Maxime Bizon <mbizon@freebox.fr> ---- - drivers/usb/host/ehci-bcm63xx.c | 154 +++++++++++++++++++++++++++++++++++++++ - drivers/usb/host/ehci-hcd.c | 5 + - 2 files changed, 159 insertions(+), 0 deletions(-) - create mode 100644 drivers/usb/host/ehci-bcm63xx.c - ---- /dev/null -+++ b/drivers/usb/host/ehci-bcm63xx.c -@@ -0,0 +1,154 @@ -+/* -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file "COPYING" in the main directory of this archive -+ * for more details. -+ * -+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr> -+ */ -+ -+#include <linux/init.h> -+#include <linux/platform_device.h> -+#include <bcm63xx_cpu.h> -+#include <bcm63xx_regs.h> -+#include <bcm63xx_io.h> -+ -+static int ehci_bcm63xx_setup(struct usb_hcd *hcd) -+{ -+ struct ehci_hcd *ehci = hcd_to_ehci(hcd); -+ int retval; -+ -+ retval = ehci_halt(ehci); -+ if (retval) -+ return retval; -+ -+ retval = ehci_init(hcd); -+ if (retval) -+ return retval; -+ -+ ehci_reset(ehci); -+ ehci_port_power(ehci, 0); -+ -+ return retval; -+} -+ -+ -+static const struct hc_driver ehci_bcm63xx_hc_driver = { -+ .description = hcd_name, -+ .product_desc = "BCM63XX integrated EHCI controller", -+ .hcd_priv_size = sizeof(struct ehci_hcd), -+ -+ .irq = ehci_irq, -+ .flags = HCD_MEMORY | HCD_USB2, -+ -+ .reset = ehci_bcm63xx_setup, -+ .start = ehci_run, -+ .stop = ehci_stop, -+ .shutdown = ehci_shutdown, -+ -+ .urb_enqueue = ehci_urb_enqueue, -+ .urb_dequeue = ehci_urb_dequeue, -+ .endpoint_disable = ehci_endpoint_disable, -+ -+ .get_frame_number = ehci_get_frame, -+ -+ .hub_status_data = ehci_hub_status_data, -+ .hub_control = ehci_hub_control, -+ .bus_suspend = ehci_bus_suspend, -+ .bus_resume = ehci_bus_resume, -+ .relinquish_port = ehci_relinquish_port, -+ .port_handed_over = ehci_port_handed_over, -+}; -+ -+static int __devinit ehci_hcd_bcm63xx_drv_probe(struct platform_device *pdev) -+{ -+ struct resource *res_mem; -+ struct usb_hcd *hcd; -+ struct ehci_hcd *ehci; -+ u32 reg; -+ int ret, irq; -+ -+ res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ irq = platform_get_irq(pdev, 0);; -+ if (!res_mem || irq < 0) -+ return -ENODEV; -+ -+ reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_REG); -+ reg &= ~USBH_PRIV_SWAP_EHCI_DATA_MASK; -+ reg |= USBH_PRIV_SWAP_EHCI_ENDN_MASK; -+ bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_REG); -+ -+ /* -+ * The magic value comes for the original vendor BSP and is -+ * needed for USB to work. Datasheet does not help, so the -+ * magic value is used as-is. -+ */ -+ bcm_rset_writel(RSET_USBH_PRIV, 0x1c0020, USBH_PRIV_TEST_REG); -+ -+ hcd = usb_create_hcd(&ehci_bcm63xx_hc_driver, &pdev->dev, "bcm63xx"); -+ if (!hcd) -+ return -ENOMEM; -+ hcd->rsrc_start = res_mem->start; -+ hcd->rsrc_len = res_mem->end - res_mem->start + 1; -+ -+ if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { -+ pr_debug("request_mem_region failed\n"); -+ ret = -EBUSY; -+ goto out; -+ } -+ -+ hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); -+ if (!hcd->regs) { -+ pr_debug("ioremap failed\n"); -+ ret = -EIO; -+ goto out1; -+ } -+ -+ ehci = hcd_to_ehci(hcd); -+ ehci->big_endian_mmio = 1; -+ ehci->big_endian_desc = 0; -+ ehci->caps = hcd->regs; -+ ehci->regs = hcd->regs + -+ HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase)); -+ ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params); -+ ehci->sbrn = 0x20; -+ -+ ret = usb_add_hcd(hcd, irq, IRQF_DISABLED); -+ if (ret) -+ goto out2; -+ -+ platform_set_drvdata(pdev, hcd); -+ return 0; -+ -+out2: -+ iounmap(hcd->regs); -+out1: -+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len); -+out: -+ usb_put_hcd(hcd); -+ return ret; -+} -+ -+static int __devexit ehci_hcd_bcm63xx_drv_remove(struct platform_device *pdev) -+{ -+ struct usb_hcd *hcd; -+ -+ hcd = platform_get_drvdata(pdev); -+ usb_remove_hcd(hcd); -+ iounmap(hcd->regs); -+ usb_put_hcd(hcd); -+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len); -+ platform_set_drvdata(pdev, NULL); -+ return 0; -+} -+ -+static struct platform_driver ehci_hcd_bcm63xx_driver = { -+ .probe = ehci_hcd_bcm63xx_drv_probe, -+ .remove = __devexit_p(ehci_hcd_bcm63xx_drv_remove), -+ .shutdown = usb_hcd_platform_shutdown, -+ .driver = { -+ .name = "bcm63xx_ehci", -+ .owner = THIS_MODULE, -+ }, -+}; -+ -+MODULE_ALIAS("platform:bcm63xx_ehci"); ---- a/drivers/usb/host/ehci-hcd.c -+++ b/drivers/usb/host/ehci-hcd.c -@@ -1229,6 +1229,11 @@ MODULE_LICENSE ("GPL"); - #define PLATFORM_DRIVER ehci_octeon_driver - #endif - -+#ifdef CONFIG_BCM63XX -+#include "ehci-bcm63xx.c" -+#define PLATFORM_DRIVER ehci_hcd_bcm63xx_driver -+#endif -+ - #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \ - !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER) && \ - !defined(XILINX_OF_PLATFORM_DRIVER) diff --git a/target/linux/brcm63xx/patches-2.6.37/040-bcm963xx_flashmap.patch b/target/linux/brcm63xx/patches-2.6.37/040-bcm963xx_flashmap.patch deleted file mode 100644 index daec18162..000000000 --- a/target/linux/brcm63xx/patches-2.6.37/040-bcm963xx_flashmap.patch +++ /dev/null @@ -1,137 +0,0 @@ -From a4d005c91d403d9f3d0272db6cc46202c06ec774 Mon Sep 17 00:00:00 2001 -From: Axel Gembe <ago@bastart.eu.org> -Date: Mon, 12 May 2008 18:54:09 +0200 -Subject: [PATCH] bcm963xx: flashmap support - -Signed-off-by: Axel Gembe <ago@bastart.eu.org> ---- - arch/mips/bcm63xx/boards/board_bcm963xx.c | 19 +---------------- - drivers/mtd/maps/bcm963xx-flash.c | 32 ++++++++++++++++++++++++---- - drivers/mtd/redboot.c | 13 +++++++++-- - 3 files changed, 38 insertions(+), 26 deletions(-) - ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -816,20 +816,6 @@ void __init board_setup(void) - panic("unexpected CPU for bcm963xx board"); - } - --static struct mtd_partition mtd_partitions[] = { -- { -- .name = "cfe", -- .offset = 0x0, -- .size = 0x40000, -- } --}; -- --static struct physmap_flash_data flash_data = { -- .width = 2, -- .nr_parts = ARRAY_SIZE(mtd_partitions), -- .parts = mtd_partitions, --}; -- - static struct resource mtd_resources[] = { - { - .start = 0, /* filled at runtime */ -@@ -839,12 +825,9 @@ static struct resource mtd_resources[] = - }; - - static struct platform_device mtd_dev = { -- .name = "physmap-flash", -+ .name = "bcm963xx-flash", - .resource = mtd_resources, - .num_resources = ARRAY_SIZE(mtd_resources), -- .dev = { -- .platform_data = &flash_data, -- }, - }; - - static struct gpio_led_platform_data bcm63xx_led_data; ---- a/drivers/mtd/maps/bcm963xx-flash.c -+++ b/drivers/mtd/maps/bcm963xx-flash.c -@@ -27,6 +27,8 @@ - #include <linux/vmalloc.h> - #include <linux/platform_device.h> - #include <linux/io.h> -+#include <linux/magic.h> -+#include <linux/jffs2.h> - - #include <asm/mach-bcm63xx/bcm963xx_tag.h> - -@@ -35,6 +37,14 @@ - - #define PFX KBUILD_MODNAME ": " - -+struct squashfs_super_block { -+ __le32 s_magic; -+ __le32 pad0[9]; -+ __le64 bytes_used; -+}; -+ -+extern int parse_redboot_partitions(struct mtd_info *master, struct mtd_partition **pparts, unsigned long fis_origin); -+ - static struct mtd_partition *parsed_parts; - - static struct mtd_info *bcm963xx_mtd_info; -@@ -214,9 +224,21 @@ static int bcm963xx_probe(struct platfor - } - } - } else { -- dev_info(&pdev->dev, "unsupported bootloader\n"); -- err = -ENODEV; -- goto err_probe; -+ printk(KERN_INFO PFX "assuming RedBoot bootloader\n"); -+ if (bcm963xx_mtd_info->size > 0x00400000) { -+ printk(KERN_INFO PFX "Support for extended flash memory size : 0x%lx ; ONLY 64MBIT SUPPORT\n", bcm963xx_mtd_info->size); -+ bcm963xx_map.virt = (u32)(BCM63XX_EXTENDED_SIZE); -+ } -+ -+#ifdef CONFIG_MTD_REDBOOT_PARTS -+ if (parsed_nr_parts == 0) { -+ int ret = parse_redboot_partitions(bcm963xx_mtd_info, &parsed_parts, 0); -+ if (ret > 0) { -+ part_type = "RedBoot"; -+ parsed_nr_parts = ret; -+ } -+ } -+#endif - } - - return add_mtd_partitions(bcm963xx_mtd_info, parsed_parts, ---- a/drivers/mtd/redboot.c -+++ b/drivers/mtd/redboot.c -@@ -57,7 +57,7 @@ static inline int redboot_checksum(struc - return 1; - } - --static int parse_redboot_partitions(struct mtd_info *master, -+int parse_redboot_partitions(struct mtd_info *master, - struct mtd_partition **pparts, - unsigned long fis_origin) - { -@@ -180,6 +180,14 @@ static int parse_redboot_partitions(stru - goto out; - } - -+ if (!fis_origin) { -+ for (i = 0; i < numslots; i++) { -+ if (!strncmp(buf[i].name, "RedBoot", 8)) { -+ fis_origin = (buf[i].flash_base & (master->size << 1) - 1); -+ } -+ } -+ } -+ - for (i = 0; i < numslots; i++) { - struct fis_list *new_fl, **prev; - -@@ -202,9 +210,8 @@ static int parse_redboot_partitions(stru - new_fl->img = &buf[i]; - if (fis_origin) { - buf[i].flash_base -= fis_origin; -- } else { -- buf[i].flash_base &= master->size-1; - } -+ buf[i].flash_base &= (master->size << 1) - 1; - - /* I'm sure the JFFS2 code has done me permanent damage. - * I now think the following is _normal_ diff --git a/target/linux/brcm63xx/patches-2.6.37/041-bcm963xx_real_rootfs_length.patch b/target/linux/brcm63xx/patches-2.6.37/041-bcm963xx_real_rootfs_length.patch deleted file mode 100644 index dccd36f4a..000000000 --- a/target/linux/brcm63xx/patches-2.6.37/041-bcm963xx_real_rootfs_length.patch +++ /dev/null @@ -1,45 +0,0 @@ ---- a/arch/mips/include/asm/mach-bcm63xx/bcm963xx_tag.h -+++ b/arch/mips/include/asm/mach-bcm63xx/bcm963xx_tag.h -@@ -86,8 +86,10 @@ struct bcm_tag { - char rootfs_crc[CRC_LEN]; - /* 224-227: CRC32 of kernel partition */ - char kernel_crc[CRC_LEN]; -- /* 228-235: Unused at present */ -- char reserved1[8]; -+ /* 228-231: Image sequence number */ -+ char image_sequence[4]; -+ /* 222-235: Openwrt: real rootfs length */ -+ char real_rootfs_length[4]; - /* 236-239: CRC32 of header excluding tagVersion */ - char header_crc[CRC_LEN]; - /* 240-255: Unused at present */ ---- a/drivers/mtd/maps/bcm963xx-flash.c -+++ b/drivers/mtd/maps/bcm963xx-flash.c -@@ -64,7 +64,7 @@ static int parse_cfe_partitions(struct m - int ret; - size_t retlen; - unsigned int rootfsaddr, kerneladdr, spareaddr; -- unsigned int rootfslen, kernellen, sparelen, totallen; -+ unsigned int rootfslen, kernellen, sparelen; - int namelen = 0; - int i; - char *boardid; -@@ -85,7 +85,7 @@ static int parse_cfe_partitions(struct m - - sscanf(buf->kernel_address, "%u", &kerneladdr); - sscanf(buf->kernel_length, "%u", &kernellen); -- sscanf(buf->total_length, "%u", &totallen); -+ rootfslen = *(uint32_t *)(&(buf->real_rootfs_length)); - tagversion = &(buf->tag_version[0]); - boardid = &(buf->board_id[0]); - -@@ -94,7 +94,8 @@ static int parse_cfe_partitions(struct m - - kerneladdr = kerneladdr - BCM63XX_EXTENDED_SIZE; - rootfsaddr = kerneladdr + kernellen; -- spareaddr = roundup(totallen, master->erasesize) + master->erasesize; -+ rootfslen = roundup(rootfslen, master->erasesize); -+ spareaddr = rootfsaddr + rootfslen; - sparelen = master->size - spareaddr - master->erasesize; - rootfslen = spareaddr - rootfsaddr; - diff --git a/target/linux/brcm63xx/patches-2.6.37/070_bcm63xx_enet_vlan_incoming_fixed.patch b/target/linux/brcm63xx/patches-2.6.37/070_bcm63xx_enet_vlan_incoming_fixed.patch deleted file mode 100644 index 8211e293b..000000000 --- a/target/linux/brcm63xx/patches-2.6.37/070_bcm63xx_enet_vlan_incoming_fixed.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- a/drivers/net/bcm63xx_enet.c -+++ b/drivers/net/bcm63xx_enet.c -@@ -1515,7 +1515,7 @@ static int compute_hw_mtu(struct bcm_ene - actual_mtu = mtu; - - /* add ethernet header + vlan tag size */ -- actual_mtu += VLAN_ETH_HLEN; -+ actual_mtu += VLAN_ETH_HLEN + VLAN_HLEN; - - if (actual_mtu < 64 || actual_mtu > BCMENET_MAX_MTU) - return -EINVAL; diff --git a/target/linux/brcm63xx/patches-2.6.37/080-bcm6345_enet.patch b/target/linux/brcm63xx/patches-2.6.37/080-bcm6345_enet.patch deleted file mode 100644 index d99ac5a6a..000000000 --- a/target/linux/brcm63xx/patches-2.6.37/080-bcm6345_enet.patch +++ /dev/null @@ -1,530 +0,0 @@ ---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h -+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h -@@ -29,16 +29,15 @@ - CKCTL_6338_SAR_EN | \ - CKCTL_6338_SPI_EN) - --#define CKCTL_6345_CPU_EN (1 << 0) --#define CKCTL_6345_BUS_EN (1 << 1) --#define CKCTL_6345_EBI_EN (1 << 2) --#define CKCTL_6345_UART_EN (1 << 3) --#define CKCTL_6345_ADSLPHY_EN (1 << 4) --#define CKCTL_6345_ENET_EN (1 << 7) --#define CKCTL_6345_USBH_EN (1 << 8) -+#define CKCTL_6345_CPU_EN (1 << 16) -+#define CKCTL_6345_BUS_EN (1 << 17) -+#define CKCTL_6345_EBI_EN (1 << 18) -+#define CKCTL_6345_UART_EN (1 << 19) -+#define CKCTL_6345_ADSLPHY_EN (1 << 20) -+#define CKCTL_6345_ENET_EN (1 << 23) -+#define CKCTL_6345_USBH_EN (1 << 24) - --#define CKCTL_6345_ALL_SAFE_EN (CKCTL_6345_ENET_EN | \ -- CKCTL_6345_USBH_EN | \ -+#define CKCTL_6345_ALL_SAFE_EN (CKCTL_6345_USBH_EN | \ - CKCTL_6345_ADSLPHY_EN) - - #define CKCTL_6348_ADSLPHY_EN (1 << 0) -@@ -548,6 +547,39 @@ - #define ENETDMA_SRAM4_REG(x) (0x20c + (x) * 0x10) - - -+/* Broadcom 6345 ENET DMA definitions */ -+#define ENETDMA_6345_CHANCFG_REG(x) (0x00 + (x) * 0x40) -+#define ENETDMA_6345_CHANCFG_EN_SHIFT 0 -+#define ENETDMA_6345_CHANCFG_EN_MASK (1 << ENETDMA_6345_CHANCFG_EN_SHIFT) -+#define ENETDMA_6345_PKTHALT_SHIFT 1 -+#define ENETDMA_6345_PKTHALT_MASK (1 << ENETDMA_6345_PKTHALT_SHIFT) -+#define ENETDMA_6345_CHAINING_SHIFT 2 -+#define ENETDMA_6345_CHAINING_MASK (1 << ENETDMA_6345_CHAINING_SHIFT) -+#define ENETDMA_6345_WRAP_EN_SHIFT 3 -+#define ENETDMA_6345_WRAP_EN_MASK (1 << ENETDMA_6345_WRAP_EN_SHIFT) -+#define ENETDMA_6345_FLOWC_EN_SHIFT 4 -+#define ENETDMA_6345_FLOWC_EN_MASK (1 << ENETDMA_6345_FLOWC_EN_SHIFT) -+ -+#define ENETDMA_6345_MAXBURST_REG(x) (0x04 + (x) * 0x40) -+ -+#define ENETDMA_6345_RSTART_REG(x) (0x08 + (x) * 0x40) -+ -+#define ENETDMA_6345_LEN_REG(x) (0x0C + (x) * 0x40) -+ -+#define ENETDMA_6345_BSTAT_REG(x) (0x10 + (x) * 0x40) -+ -+#define ENETDMA_6345_IR_REG(x) (0x14 + (x) * 0x40) -+#define ENETDMA_6345_IR_BUFDONE_MASK (1 << 0) -+#define ENETDMA_6345_IR_PKTDONE_MASK (1 << 1) -+#define ENETDMA_6345_IR_NOTOWNER_MASK (1 << 2) -+ -+#define ENETDMA_6345_IRMASK_REG(x) (0x18 + (x) * 0x40) -+ -+#define ENETDMA_6345_FC_REG(x) (0x1C + (x) * 0x40) -+ -+#define ENETDMA_6345_BUFALLOC_REG(x) (0x20 + (x) * 0x40) -+ -+ - /************************************************************************* - * _REG relative to RSET_OHCI_PRIV - *************************************************************************/ ---- a/drivers/net/bcm63xx_enet.c -+++ b/drivers/net/bcm63xx_enet.c -@@ -31,6 +31,7 @@ - #include <linux/if_vlan.h> - - #include <bcm63xx_dev_enet.h> -+#include <bcm63xx_cpu.h> - #include "bcm63xx_enet.h" - - static char bcm_enet_driver_name[] = "bcm63xx_enet"; -@@ -177,6 +178,7 @@ static void bcm_enet_mdio_write_mii(stru - static int bcm_enet_refill_rx(struct net_device *dev) - { - struct bcm_enet_priv *priv; -+ unsigned int desc_shift = BCMCPU_IS_6345() ? DMADESC_6345_SHIFT : 0; - - priv = netdev_priv(dev); - -@@ -205,7 +207,7 @@ static int bcm_enet_refill_rx(struct net - len_stat = priv->rx_skb_size << DMADESC_LENGTH_SHIFT; - len_stat |= DMADESC_OWNER_MASK; - if (priv->rx_dirty_desc == priv->rx_ring_size - 1) { -- len_stat |= DMADESC_WRAP_MASK; -+ len_stat |= (DMADESC_WRAP_MASK >> desc_shift); - priv->rx_dirty_desc = 0; - } else { - priv->rx_dirty_desc++; -@@ -216,7 +218,10 @@ static int bcm_enet_refill_rx(struct net - priv->rx_desc_count++; - - /* tell dma engine we allocated one buffer */ -- enet_dma_writel(priv, 1, ENETDMA_BUFALLOC_REG(priv->rx_chan)); -+ if (!BCMCPU_IS_6345()) -+ enet_dma_writel(priv, 1, ENETDMA_BUFALLOC_REG(priv->rx_chan)); -+ else -+ enet_dma_writel(priv, 1, ENETDMA_6345_BUFALLOC_REG(priv->rx_chan)); - } - - /* If rx ring is still empty, set a timer to try allocating -@@ -254,6 +259,7 @@ static int bcm_enet_receive_queue(struct - struct bcm_enet_priv *priv; - struct device *kdev; - int processed; -+ unsigned int desc_shift = BCMCPU_IS_6345() ? DMADESC_6345_SHIFT : 0; - - priv = netdev_priv(dev); - kdev = &priv->pdev->dev; -@@ -292,7 +298,7 @@ static int bcm_enet_receive_queue(struct - - /* if the packet does not have start of packet _and_ - * end of packet flag set, then just recycle it */ -- if ((len_stat & DMADESC_ESOP_MASK) != DMADESC_ESOP_MASK) { -+ if ((len_stat & (DMADESC_ESOP_MASK >> desc_shift)) != (DMADESC_ESOP_MASK >> desc_shift)) { - dev->stats.rx_dropped++; - continue; - } -@@ -352,8 +358,15 @@ static int bcm_enet_receive_queue(struct - bcm_enet_refill_rx(dev); - - /* kick rx dma */ -- enet_dma_writel(priv, ENETDMA_CHANCFG_EN_MASK, -- ENETDMA_CHANCFG_REG(priv->rx_chan)); -+ if (!BCMCPU_IS_6345()) -+ enet_dma_writel(priv, ENETDMA_CHANCFG_EN_MASK, -+ ENETDMA_CHANCFG_REG(priv->rx_chan)); -+ else -+ enet_dma_writel(priv, ENETDMA_6345_CHANCFG_EN_MASK | -+ ENETDMA_6345_CHAINING_MASK | -+ ENETDMA_6345_WRAP_EN_MASK | -+ ENETDMA_6345_FLOWC_EN_MASK, -+ ENETDMA_6345_CHANCFG_REG(priv->rx_chan)); - } - - return processed; -@@ -428,10 +441,21 @@ static int bcm_enet_poll(struct napi_str - dev = priv->net_dev; - - /* ack interrupts */ -- enet_dma_writel(priv, ENETDMA_IR_PKTDONE_MASK, -- ENETDMA_IR_REG(priv->rx_chan)); -- enet_dma_writel(priv, ENETDMA_IR_PKTDONE_MASK, -- ENETDMA_IR_REG(priv->tx_chan)); -+ if (!BCMCPU_IS_6345()) { -+ enet_dma_writel(priv, ENETDMA_IR_PKTDONE_MASK, -+ ENETDMA_IR_REG(priv->rx_chan)); -+ enet_dma_writel(priv, ENETDMA_IR_PKTDONE_MASK, -+ ENETDMA_IR_REG(priv->tx_chan)); -+ } else { -+ enet_dma_writel(priv, ENETDMA_IR_BUFDONE_MASK | -+ ENETDMA_IR_PKTDONE_MASK | -+ ENETDMA_IR_NOTOWNER_MASK, -+ ENETDMA_6345_IR_REG(priv->rx_chan)); -+ enet_dma_writel(priv, ENETDMA_IR_BUFDONE_MASK | -+ ENETDMA_IR_PKTDONE_MASK | -+ ENETDMA_IR_NOTOWNER_MASK, -+ ENETDMA_6345_IR_REG(priv->tx_chan)); -+ } - - /* reclaim sent skb */ - tx_work_done = bcm_enet_tx_reclaim(dev, 0); -@@ -450,10 +474,21 @@ static int bcm_enet_poll(struct napi_str - napi_complete(napi); - - /* restore rx/tx interrupt */ -- enet_dma_writel(priv, ENETDMA_IR_PKTDONE_MASK, -- ENETDMA_IRMASK_REG(priv->rx_chan)); -- enet_dma_writel(priv, ENETDMA_IR_PKTDONE_MASK, -- ENETDMA_IRMASK_REG(priv->tx_chan)); -+ if (!BCMCPU_IS_6345()) { -+ enet_dma_writel(priv, ENETDMA_IR_PKTDONE_MASK, -+ ENETDMA_IRMASK_REG(priv->rx_chan)); -+ enet_dma_writel(priv, ENETDMA_IR_PKTDONE_MASK, -+ ENETDMA_IRMASK_REG(priv->tx_chan)); -+ } else { -+ enet_dma_writel(priv, ENETDMA_IR_BUFDONE_MASK | -+ ENETDMA_IR_PKTDONE_MASK | -+ ENETDMA_IR_NOTOWNER_MASK, -+ ENETDMA_6345_IRMASK_REG(priv->rx_chan)); -+ enet_dma_writel(priv, ENETDMA_IR_BUFDONE_MASK | -+ ENETDMA_IR_PKTDONE_MASK | -+ ENETDMA_IR_NOTOWNER_MASK, -+ ENETDMA_6345_IRMASK_REG(priv->tx_chan)); -+ } - - return rx_work_done; - } -@@ -496,8 +531,13 @@ static irqreturn_t bcm_enet_isr_dma(int - priv = netdev_priv(dev); - - /* mask rx/tx interrupts */ -- enet_dma_writel(priv, 0, ENETDMA_IRMASK_REG(priv->rx_chan)); -- enet_dma_writel(priv, 0, ENETDMA_IRMASK_REG(priv->tx_chan)); -+ if (!BCMCPU_IS_6345()) { -+ enet_dma_writel(priv, 0, ENETDMA_IRMASK_REG(priv->rx_chan)); -+ enet_dma_writel(priv, 0, ENETDMA_IRMASK_REG(priv->tx_chan)); -+ } else { -+ enet_dma_writel(priv, 0, ENETDMA_6345_IRMASK_REG(priv->rx_chan)); -+ enet_dma_writel(priv, 0, ENETDMA_6345_IRMASK_REG(priv->tx_chan)); -+ } - - napi_schedule(&priv->napi); - -@@ -513,6 +553,7 @@ static int bcm_enet_start_xmit(struct sk - struct bcm_enet_desc *desc; - u32 len_stat; - int ret; -+ unsigned int desc_shift = BCMCPU_IS_6345() ? DMADESC_6345_SHIFT : 0; - - priv = netdev_priv(dev); - -@@ -538,14 +579,13 @@ static int bcm_enet_start_xmit(struct sk - DMA_TO_DEVICE); - - len_stat = (skb->len << DMADESC_LENGTH_SHIFT) & DMADESC_LENGTH_MASK; -- len_stat |= DMADESC_ESOP_MASK | -- DMADESC_APPEND_CRC | -- DMADESC_OWNER_MASK; -+ len_stat |= ((DMADESC_ESOP_MASK >> desc_shift) | -+ DMADESC_APPEND_CRC | DMADESC_OWNER_MASK); - - priv->tx_curr_desc++; - if (priv->tx_curr_desc == priv->tx_ring_size) { - priv->tx_curr_desc = 0; -- len_stat |= DMADESC_WRAP_MASK; -+ len_stat |= (DMADESC_WRAP_MASK >> desc_shift); - } - priv->tx_desc_count--; - -@@ -556,8 +596,15 @@ static int bcm_enet_start_xmit(struct sk - wmb(); - - /* kick tx dma */ -- enet_dma_writel(priv, ENETDMA_CHANCFG_EN_MASK, -- ENETDMA_CHANCFG_REG(priv->tx_chan)); -+ if (!BCMCPU_IS_6345()) -+ enet_dma_writel(priv, ENETDMA_CHANCFG_EN_MASK, -+ ENETDMA_CHANCFG_REG(priv->tx_chan)); -+ else -+ enet_dma_writel(priv, ENETDMA_6345_CHANCFG_EN_MASK | -+ ENETDMA_6345_CHAINING_MASK | -+ ENETDMA_6345_WRAP_EN_MASK | -+ ENETDMA_6345_FLOWC_EN_MASK, -+ ENETDMA_6345_CHANCFG_REG(priv->tx_chan)); - - /* stop queue if no more desc available */ - if (!priv->tx_desc_count) -@@ -685,6 +732,9 @@ static void bcm_enet_set_flow(struct bcm - val &= ~ENET_RXCFG_ENFLOW_MASK; - enet_writel(priv, val, ENET_RXCFG_REG); - -+ if (BCMCPU_IS_6345()) -+ return; -+ - /* tx flow control (pause frame generation) */ - val = enet_dma_readl(priv, ENETDMA_CFG_REG); - if (tx_en) -@@ -832,8 +882,13 @@ static int bcm_enet_open(struct net_devi - - /* mask all interrupts and request them */ - enet_writel(priv, 0, ENET_IRMASK_REG); -- enet_dma_writel(priv, 0, ENETDMA_IRMASK_REG(priv->rx_chan)); -- enet_dma_writel(priv, 0, ENETDMA_IRMASK_REG(priv->tx_chan)); -+ if (!BCMCPU_IS_6345()) { -+ enet_dma_writel(priv, 0, ENETDMA_IRMASK_REG(priv->rx_chan)); -+ enet_dma_writel(priv, 0, ENETDMA_IRMASK_REG(priv->tx_chan)); -+ } else { -+ enet_dma_writel(priv, 0, ENETDMA_6345_IRMASK_REG(priv->rx_chan)); -+ enet_dma_writel(priv, 0, ENETDMA_6345_IRMASK_REG(priv->tx_chan)); -+ } - - ret = request_irq(dev->irq, bcm_enet_isr_mac, 0, dev->name, dev); - if (ret) -@@ -912,8 +967,12 @@ static int bcm_enet_open(struct net_devi - priv->rx_curr_desc = 0; - - /* initialize flow control buffer allocation */ -- enet_dma_writel(priv, ENETDMA_BUFALLOC_FORCE_MASK | 0, -- ENETDMA_BUFALLOC_REG(priv->rx_chan)); -+ if (!BCMCPU_IS_6345()) -+ enet_dma_writel(priv, ENETDMA_BUFALLOC_FORCE_MASK | 0, -+ ENETDMA_BUFALLOC_REG(priv->rx_chan)); -+ else -+ enet_dma_writel(priv, ENETDMA_BUFALLOC_FORCE_MASK | 0, -+ ENETDMA_6345_BUFALLOC_REG(priv->rx_chan)); - - if (bcm_enet_refill_rx(dev)) { - dev_err(kdev, "cannot allocate rx skb queue\n"); -@@ -922,37 +981,62 @@ static int bcm_enet_open(struct net_devi - } - - /* write rx & tx ring addresses */ -- enet_dma_writel(priv, priv->rx_desc_dma, -- ENETDMA_RSTART_REG(priv->rx_chan)); -- enet_dma_writel(priv, priv->tx_desc_dma, -- ENETDMA_RSTART_REG(priv->tx_chan)); -+ if (!BCMCPU_IS_6345()) { -+ enet_dma_writel(priv, priv->rx_desc_dma, -+ ENETDMA_RSTART_REG(priv->rx_chan)); -+ enet_dma_writel(priv, priv->tx_desc_dma, -+ ENETDMA_RSTART_REG(priv->tx_chan)); -+ } else { -+ enet_dma_writel(priv, priv->rx_desc_dma, -+ ENETDMA_6345_RSTART_REG(priv->rx_chan)); -+ enet_dma_writel(priv, priv->tx_desc_dma, -+ ENETDMA_6345_RSTART_REG(priv->tx_chan)); -+ } - - /* clear remaining state ram for rx & tx channel */ -- enet_dma_writel(priv, 0, ENETDMA_SRAM2_REG(priv->rx_chan)); -- enet_dma_writel(priv, 0, ENETDMA_SRAM2_REG(priv->tx_chan)); -- enet_dma_writel(priv, 0, ENETDMA_SRAM3_REG(priv->rx_chan)); -- enet_dma_writel(priv, 0, ENETDMA_SRAM3_REG(priv->tx_chan)); -- enet_dma_writel(priv, 0, ENETDMA_SRAM4_REG(priv->rx_chan)); -- enet_dma_writel(priv, 0, ENETDMA_SRAM4_REG(priv->tx_chan)); -+ if (!BCMCPU_IS_6345()) { -+ enet_dma_writel(priv, 0, ENETDMA_SRAM2_REG(priv->rx_chan)); -+ enet_dma_writel(priv, 0, ENETDMA_SRAM2_REG(priv->tx_chan)); -+ enet_dma_writel(priv, 0, ENETDMA_SRAM3_REG(priv->rx_chan)); -+ enet_dma_writel(priv, 0, ENETDMA_SRAM3_REG(priv->tx_chan)); -+ enet_dma_writel(priv, 0, ENETDMA_SRAM4_REG(priv->rx_chan)); -+ enet_dma_writel(priv, 0, ENETDMA_SRAM4_REG(priv->tx_chan)); -+ } else { -+ enet_dma_writel(priv, 0, ENETDMA_6345_FC_REG(priv->rx_chan)); -+ enet_dma_writel(priv, 0, ENETDMA_6345_FC_REG(priv->tx_chan)); -+ } - - /* set max rx/tx length */ - enet_writel(priv, priv->hw_mtu, ENET_RXMAXLEN_REG); - enet_writel(priv, priv->hw_mtu, ENET_TXMAXLEN_REG); - - /* set dma maximum burst len */ -- enet_dma_writel(priv, BCMENET_DMA_MAXBURST, -- ENETDMA_MAXBURST_REG(priv->rx_chan)); -- enet_dma_writel(priv, BCMENET_DMA_MAXBURST, -- ENETDMA_MAXBURST_REG(priv->tx_chan)); -+ if (!BCMCPU_IS_6345()) { -+ enet_dma_writel(priv, BCMENET_DMA_MAXBURST, -+ ENETDMA_MAXBURST_REG(priv->rx_chan)); -+ enet_dma_writel(priv, BCMENET_DMA_MAXBURST, -+ ENETDMA_MAXBURST_REG(priv->tx_chan)); -+ } else { -+ enet_dma_writel(priv, BCMENET_DMA_MAXBURST, -+ ENETDMA_6345_MAXBURST_REG(priv->rx_chan)); -+ enet_dma_writel(priv, BCMENET_DMA_MAXBURST, -+ ENETDMA_6345_MAXBURST_REG(priv->tx_chan)); -+ } - - /* set correct transmit fifo watermark */ - enet_writel(priv, BCMENET_TX_FIFO_TRESH, ENET_TXWMARK_REG); - - /* set flow control low/high threshold to 1/3 / 2/3 */ -- val = priv->rx_ring_size / 3; -- enet_dma_writel(priv, val, ENETDMA_FLOWCL_REG(priv->rx_chan)); -- val = (priv->rx_ring_size * 2) / 3; -- enet_dma_writel(priv, val, ENETDMA_FLOWCH_REG(priv->rx_chan)); -+ if (!BCMCPU_IS_6345()) { -+ val = priv->rx_ring_size / 3; -+ enet_dma_writel(priv, val, ENETDMA_FLOWCL_REG(priv->rx_chan)); -+ val = (priv->rx_ring_size * 2) / 3; -+ enet_dma_writel(priv, val, ENETDMA_FLOWCH_REG(priv->rx_chan)); -+ } else { -+ enet_dma_writel(priv, 5, ENETDMA_6345_FC_REG(priv->rx_chan)); -+ enet_dma_writel(priv, priv->rx_ring_size, ENETDMA_6345_LEN_REG(priv->rx_chan)); -+ enet_dma_writel(priv, priv->tx_ring_size, ENETDMA_6345_LEN_REG(priv->tx_chan)); -+ } - - /* all set, enable mac and interrupts, start dma engine and - * kick rx dma channel */ -@@ -960,27 +1044,58 @@ static int bcm_enet_open(struct net_devi - val = enet_readl(priv, ENET_CTL_REG); - val |= ENET_CTL_ENABLE_MASK; - enet_writel(priv, val, ENET_CTL_REG); -- enet_dma_writel(priv, ENETDMA_CFG_EN_MASK, ENETDMA_CFG_REG); -- enet_dma_writel(priv, ENETDMA_CHANCFG_EN_MASK, -- ENETDMA_CHANCFG_REG(priv->rx_chan)); -+ -+ if (!BCMCPU_IS_6345()) { -+ enet_dma_writel(priv, ENETDMA_CFG_EN_MASK, ENETDMA_CFG_REG); -+ enet_dma_writel(priv, ENETDMA_CHANCFG_EN_MASK, -+ ENETDMA_CHANCFG_REG(priv->rx_chan)); -+ } else { -+ enet_dma_writel(priv, ENETDMA_6345_CHANCFG_EN_MASK | -+ ENETDMA_6345_CHAINING_MASK | -+ ENETDMA_6345_WRAP_EN_MASK | -+ ENETDMA_6345_FLOWC_EN_MASK, -+ ENETDMA_6345_CHANCFG_REG(priv->rx_chan)); -+ } - - /* watch "mib counters about to overflow" interrupt */ - enet_writel(priv, ENET_IR_MIB, ENET_IR_REG); - enet_writel(priv, ENET_IR_MIB, ENET_IRMASK_REG); - - /* watch "packet transferred" interrupt in rx and tx */ -- enet_dma_writel(priv, ENETDMA_IR_PKTDONE_MASK, -- ENETDMA_IR_REG(priv->rx_chan)); -- enet_dma_writel(priv, ENETDMA_IR_PKTDONE_MASK, -- ENETDMA_IR_REG(priv->tx_chan)); -+ if (!BCMCPU_IS_6345()) { -+ enet_dma_writel(priv, ENETDMA_IR_PKTDONE_MASK, -+ ENETDMA_IR_REG(priv->rx_chan)); -+ enet_dma_writel(priv, ENETDMA_IR_PKTDONE_MASK, -+ ENETDMA_IR_REG(priv->tx_chan)); -+ } else { -+ enet_dma_writel(priv, ENETDMA_IR_BUFDONE_MASK | -+ ENETDMA_IR_PKTDONE_MASK | -+ ENETDMA_IR_NOTOWNER_MASK, -+ ENETDMA_6345_IR_REG(priv->rx_chan)); -+ enet_dma_writel(priv, ENETDMA_IR_BUFDONE_MASK | -+ ENETDMA_IR_PKTDONE_MASK | -+ ENETDMA_IR_NOTOWNER_MASK, -+ ENETDMA_6345_IR_REG(priv->tx_chan)); -+ } - - /* make sure we enable napi before rx interrupt */ - napi_enable(&priv->napi); - -- enet_dma_writel(priv, ENETDMA_IR_PKTDONE_MASK, -- ENETDMA_IRMASK_REG(priv->rx_chan)); -- enet_dma_writel(priv, ENETDMA_IR_PKTDONE_MASK, -- ENETDMA_IRMASK_REG(priv->tx_chan)); -+ if (!BCMCPU_IS_6345()) { -+ enet_dma_writel(priv, ENETDMA_IR_PKTDONE_MASK, -+ ENETDMA_IRMASK_REG(priv->rx_chan)); -+ enet_dma_writel(priv, ENETDMA_IR_PKTDONE_MASK, -+ ENETDMA_IRMASK_REG(priv->tx_chan)); -+ } else { -+ enet_dma_writel(priv, ENETDMA_IR_BUFDONE_MASK | -+ ENETDMA_IR_PKTDONE_MASK | -+ ENETDMA_IR_NOTOWNER_MASK, -+ ENETDMA_6345_IRMASK_REG(priv->rx_chan)); -+ enet_dma_writel(priv, ENETDMA_IR_BUFDONE_MASK | -+ ENETDMA_IR_PKTDONE_MASK | -+ ENETDMA_IR_NOTOWNER_MASK, -+ ENETDMA_6345_IRMASK_REG(priv->tx_chan)); -+ } - - if (priv->has_phy) - phy_start(priv->phydev); -@@ -1060,13 +1175,19 @@ static void bcm_enet_disable_dma(struct - { - int limit; - -- enet_dma_writel(priv, 0, ENETDMA_CHANCFG_REG(chan)); -+ if (!BCMCPU_IS_6345()) -+ enet_dma_writel(priv, 0, ENETDMA_CHANCFG_REG(chan)); -+ else -+ enet_dma_writel(priv, 0, ENETDMA_6345_CHANCFG_REG(chan)); - - limit = 1000; - do { - u32 val; - -- val = enet_dma_readl(priv, ENETDMA_CHANCFG_REG(chan)); -+ if (!BCMCPU_IS_6345()) -+ val = enet_dma_readl(priv, ENETDMA_CHANCFG_REG(chan)); -+ else -+ val = enet_dma_readl(priv, ENETDMA_6345_CHANCFG_REG(chan)); - if (!(val & ENETDMA_CHANCFG_EN_MASK)) - break; - udelay(1); -@@ -1093,8 +1214,13 @@ static int bcm_enet_stop(struct net_devi - - /* mask all interrupts */ - enet_writel(priv, 0, ENET_IRMASK_REG); -- enet_dma_writel(priv, 0, ENETDMA_IRMASK_REG(priv->rx_chan)); -- enet_dma_writel(priv, 0, ENETDMA_IRMASK_REG(priv->tx_chan)); -+ if (!BCMCPU_IS_6345()) { -+ enet_dma_writel(priv, 0, ENETDMA_IRMASK_REG(priv->rx_chan)); -+ enet_dma_writel(priv, 0, ENETDMA_IRMASK_REG(priv->tx_chan)); -+ } else { -+ enet_dma_writel(priv, 0, ENETDMA_6345_IRMASK_REG(priv->rx_chan)); -+ enet_dma_writel(priv, 0, ENETDMA_6345_IRMASK_REG(priv->tx_chan)); -+ } - - /* make sure no mib update is scheduled */ - flush_scheduled_work(); -@@ -1622,6 +1748,7 @@ static int __devinit bcm_enet_probe(stru - const char *clk_name; - unsigned int iomem_size; - int i, ret; -+ unsigned int chan_offset = 0; - - /* stop if shared driver failed, assume driver->probe will be - * called in the same order we register devices (correct ?) */ -@@ -1661,10 +1788,13 @@ static int __devinit bcm_enet_probe(stru - priv->irq_tx = res_irq_tx->start; - priv->mac_id = pdev->id; - -+ if (BCMCPU_IS_6345()) -+ chan_offset = 1; -+ - /* get rx & tx dma channel id for this mac */ - if (priv->mac_id == 0) { -- priv->rx_chan = 0; -- priv->tx_chan = 1; -+ priv->rx_chan = 0 + chan_offset; -+ priv->tx_chan = 1 + chan_offset; - clk_name = "enet0"; - } else { - priv->rx_chan = 2; ---- a/drivers/net/bcm63xx_enet.h -+++ b/drivers/net/bcm63xx_enet.h -@@ -46,6 +46,9 @@ struct bcm_enet_desc { - #define DMADESC_ESOP_MASK (DMADESC_EOP_MASK | DMADESC_SOP_MASK) - #define DMADESC_WRAP_MASK (1 << 12) - -+/* Shift down for EOP, SOP and WRAP bits */ -+#define DMADESC_6345_SHIFT (3) -+ - #define DMADESC_UNDER_MASK (1 << 9) - #define DMADESC_APPEND_CRC (1 << 8) - #define DMADESC_OVSIZE_MASK (1 << 4) ---- a/arch/mips/bcm63xx/dev-enet.c -+++ b/arch/mips/bcm63xx/dev-enet.c -@@ -104,7 +104,7 @@ int __init bcm63xx_enet_register(int uni - if (unit > 1) - return -ENODEV; - -- if (unit == 1 && BCMCPU_IS_6338()) -+ if (unit == 1 && (BCMCPU_IS_6338() || BCMCPU_IS_6345())) - return -ENODEV; - - if (!shared_device_registered) { diff --git a/target/linux/brcm63xx/patches-2.6.37/100-reset_buttons.patch b/target/linux/brcm63xx/patches-2.6.37/100-reset_buttons.patch deleted file mode 100644 index 786c18b77..000000000 --- a/target/linux/brcm63xx/patches-2.6.37/100-reset_buttons.patch +++ /dev/null @@ -1,98 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -15,6 +15,8 @@ - #include <linux/mtd/partitions.h> - #include <linux/mtd/physmap.h> - #include <linux/ssb/ssb.h> -+#include <linux/gpio_buttons.h> -+#include <linux/input.h> - #include <asm/addrspace.h> - #include <bcm63xx_board.h> - #include <bcm63xx_cpu.h> -@@ -296,6 +298,16 @@ static struct board_info __initdata boar - .active_low = 1, - }, - }, -+ .buttons = { -+ { -+ .desc = "reset", -+ .gpio = 33, -+ .active_low = 1, -+ .type = EV_KEY, -+ .code = KEY_RESTART, -+ .threshold = 3, -+ }, -+ }, - }; - - static struct board_info __initdata board_96348gw = { -@@ -354,6 +366,16 @@ static struct board_info __initdata boar - .active_low = 1, - }, - }, -+ .buttons = { -+ { -+ .desc = "reset", -+ .gpio = 36, -+ .active_low = 1, -+ .type = EV_KEY, -+ .code = KEY_RESTART, -+ .threshold = 3, -+ }, -+ }, - }; - - static struct board_info __initdata board_FAST2404 = { -@@ -838,12 +860,23 @@ static struct platform_device bcm63xx_gp - .dev.platform_data = &bcm63xx_led_data, - }; - -+static struct gpio_buttons_platform_data bcm63xx_gpio_buttons_data = { -+ .poll_interval = 20, -+}; -+ -+static struct platform_device bcm63xx_gpio_buttons_device = { -+ .name = "gpio-buttons", -+ .id = 0, -+ .dev.platform_data = &bcm63xx_gpio_buttons_data, -+}; -+ - /* - * third stage init callback, register all board devices. - */ - int __init board_register_devices(void) - { - u32 val; -+ int button_count = 0; - - if (board.has_uart0) - bcm63xx_uart_register(0); -@@ -888,5 +921,16 @@ int __init board_register_devices(void) - - platform_device_register(&bcm63xx_gpio_leds); - -+ /* count number of BUTTONs defined by this device */ -+ while (button_count < ARRAY_SIZE(board.buttons) && board.buttons[button_count].desc) -+ button_count++; -+ -+ if (button_count) { -+ bcm63xx_gpio_buttons_data.nbuttons = button_count; -+ bcm63xx_gpio_buttons_data.buttons = board.buttons; -+ -+ platform_device_register(&bcm63xx_gpio_buttons_device); -+ } -+ - return 0; - } ---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h -+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h -@@ -57,6 +57,9 @@ struct board_info { - - /* GPIO LEDs */ - struct gpio_led leds[5]; -+ -+ /* Buttons */ -+ struct gpio_button buttons[2]; - }; - - #endif /* ! BOARD_BCM963XX_H_ */ diff --git a/target/linux/brcm63xx/patches-2.6.37/110-gpiodev.patch b/target/linux/brcm63xx/patches-2.6.37/110-gpiodev.patch deleted file mode 100644 index fc99f5345..000000000 --- a/target/linux/brcm63xx/patches-2.6.37/110-gpiodev.patch +++ /dev/null @@ -1,22 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -852,6 +852,10 @@ static struct platform_device mtd_dev = - .num_resources = ARRAY_SIZE(mtd_resources), - }; - -+static struct resource gpiodev_resource = { -+ .start = 0xFFFFFFFF, -+}; -+ - static struct gpio_led_platform_data bcm63xx_led_data; - - static struct platform_device bcm63xx_gpio_leds = { -@@ -916,6 +920,8 @@ int __init board_register_devices(void) - - platform_device_register(&mtd_dev); - -+ platform_device_register_simple("GPIODEV", 0, &gpiodev_resource, 1); -+ - bcm63xx_led_data.num_leds = ARRAY_SIZE(board.leds); - bcm63xx_led_data.leds = board.leds; - diff --git a/target/linux/brcm63xx/patches-2.6.37/141-led_count.patch b/target/linux/brcm63xx/patches-2.6.37/141-led_count.patch deleted file mode 100644 index baf092053..000000000 --- a/target/linux/brcm63xx/patches-2.6.37/141-led_count.patch +++ /dev/null @@ -1,23 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -881,6 +881,7 @@ int __init board_register_devices(void) - { - u32 val; - int button_count = 0; -+ int led_count = 0; - - if (board.has_uart0) - bcm63xx_uart_register(0); -@@ -922,7 +923,11 @@ int __init board_register_devices(void) - - platform_device_register_simple("GPIODEV", 0, &gpiodev_resource, 1); - -- bcm63xx_led_data.num_leds = ARRAY_SIZE(board.leds); -+ /* count number of LEDs defined by this device */ -+ while (led_count < ARRAY_SIZE(board.leds) && board.leds[led_count].name) -+ led_count++; -+ -+ bcm63xx_led_data.num_leds = led_count; - bcm63xx_led_data.leds = board.leds; - - platform_device_register(&bcm63xx_gpio_leds); diff --git a/target/linux/brcm63xx/patches-2.6.37/180-udc_preliminary_support.patch b/target/linux/brcm63xx/patches-2.6.37/180-udc_preliminary_support.patch deleted file mode 100644 index 7b341b719..000000000 --- a/target/linux/brcm63xx/patches-2.6.37/180-udc_preliminary_support.patch +++ /dev/null @@ -1,243 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -29,6 +29,7 @@ - #include <bcm63xx_dev_pcmcia.h> - #include <bcm63xx_dev_usb_ohci.h> - #include <bcm63xx_dev_usb_ehci.h> -+#include <bcm63xx_dev_usb_udc.h> - #include <board_bcm963xx.h> - - #define PFX "board_bcm963xx: " -@@ -400,6 +401,8 @@ static struct board_info __initdata boar - .has_ohci0 = 1, - .has_pccard = 1, - .has_ehci0 = 1, -+ -+ .has_udc0 = 1, - }; - - static struct board_info __initdata board_rta1025w_16 = { -@@ -909,6 +912,9 @@ int __init board_register_devices(void) - if (board.has_dsp) - bcm63xx_dsp_register(&board.dsp); - -+ if (board.has_udc0) -+ bcm63xx_udc_register(); -+ - /* read base address of boot chip select (0) */ - if (BCMCPU_IS_6345()) - val = 0x1fc00000; ---- /dev/null -+++ b/arch/mips/bcm63xx/dev-usb-udc.c -@@ -0,0 +1,58 @@ -+/* -+ * Copyright (C) 2009 Henk Vergonet <Henk.Vergonet@gmail.com> -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. -+ */ -+#include <linux/init.h> -+#include <linux/kernel.h> -+#include <linux/platform_device.h> -+#include <bcm63xx_cpu.h> -+ -+static struct resource udc_resources[] = { -+ { -+ .start = -1, /* filled at runtime */ -+ .end = -1, /* filled at runtime */ -+ .flags = IORESOURCE_MEM, -+ }, -+ { -+ .start = -1, /* filled at runtime */ -+ .flags = IORESOURCE_IRQ, -+ }, -+}; -+ -+static u64 udc_dmamask = ~(u32)0; -+ -+static struct platform_device bcm63xx_udc_device = { -+ .name = "bcm63xx-udc", -+ .id = 0, -+ .num_resources = ARRAY_SIZE(udc_resources), -+ .resource = udc_resources, -+ .dev = { -+ .dma_mask = &udc_dmamask, -+ .coherent_dma_mask = 0xffffffff, -+ }, -+}; -+ -+int __init bcm63xx_udc_register(void) -+{ -+ if (!BCMCPU_IS_6338() && !BCMCPU_IS_6345() && !BCMCPU_IS_6348()) -+ return 0; -+ -+ udc_resources[0].start = bcm63xx_regset_address(RSET_UDC0); -+ udc_resources[0].end = udc_resources[0].start; -+ udc_resources[0].end += RSET_UDC_SIZE - 1; -+ udc_resources[1].start = bcm63xx_get_irq_number(IRQ_UDC0); -+ return platform_device_register(&bcm63xx_udc_device); -+} ---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h -+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h -@@ -127,7 +127,7 @@ enum bcm63xx_regs_set { - #define BCM_6338_UART1_BASE (0xdeadbeef) - #define BCM_6338_GPIO_BASE (0xfffe0400) - #define BCM_6338_SPI_BASE (0xfffe0c00) --#define BCM_6338_UDC0_BASE (0xdeadbeef) -+#define BCM_6338_UDC0_BASE (0xfffe3000) - #define BCM_6338_USBDMA_BASE (0xfffe2400) - #define BCM_6338_OHCI0_BASE (0xdeadbeef) - #define BCM_6338_OHCI_PRIV_BASE (0xfffe3000) -@@ -158,7 +158,7 @@ enum bcm63xx_regs_set { - #define BCM_6345_UART1_BASE (0xdeadbeef) - #define BCM_6345_GPIO_BASE (0xfffe0400) - #define BCM_6345_SPI_BASE (0xdeadbeef) --#define BCM_6345_UDC0_BASE (0xdeadbeef) -+#define BCM_6345_UDC0_BASE (0xfffe2100) - #define BCM_6345_USBDMA_BASE (0xfffe2800) - #define BCM_6345_ENET0_BASE (0xfffe1800) - #define BCM_6345_ENETDMA_BASE (0xfffe2800) -@@ -215,7 +215,7 @@ enum bcm63xx_regs_set { - #define BCM_6358_UART1_BASE (0xfffe0120) - #define BCM_6358_GPIO_BASE (0xfffe0080) - #define BCM_6358_SPI_BASE (0xdeadbeef) --#define BCM_6358_UDC0_BASE (0xfffe0800) -+#define BCM_6358_UDC0_BASE (0xfffe0400) - #define BCM_6358_OHCI0_BASE (0xfffe1400) - #define BCM_6358_OHCI_PRIV_BASE (0xdeadbeef) - #define BCM_6358_USBH_PRIV_BASE (0xfffe1500) -@@ -444,6 +444,7 @@ enum bcm63xx_irq { - IRQ_UART0, - IRQ_UART1, - IRQ_DSL, -+ IRQ_UDC0, - IRQ_ENET0, - IRQ_ENET1, - IRQ_ENET_PHY, -@@ -486,7 +487,7 @@ enum bcm63xx_irq { - #define BCM_6345_UART0_IRQ (IRQ_INTERNAL_BASE + 2) - #define BCM_6345_DSL_IRQ (IRQ_INTERNAL_BASE + 3) - #define BCM_6345_ATM_IRQ (IRQ_INTERNAL_BASE + 4) --#define BCM_6345_USB_IRQ (IRQ_INTERNAL_BASE + 5) -+#define BCM_6345_UDC0_IRQ (IRQ_INTERNAL_BASE + 5) - #define BCM_6345_ENET0_IRQ (IRQ_INTERNAL_BASE + 8) - #define BCM_6345_ENET_PHY_IRQ (IRQ_INTERNAL_BASE + 12) - #define BCM_6345_ENET0_RXDMA_IRQ (IRQ_INTERNAL_BASE + 13 + 1) -@@ -508,10 +509,17 @@ enum bcm63xx_irq { - #define BCM_6348_TIMER_IRQ (IRQ_INTERNAL_BASE + 0) - #define BCM_6348_UART0_IRQ (IRQ_INTERNAL_BASE + 2) - #define BCM_6348_DSL_IRQ (IRQ_INTERNAL_BASE + 4) -+#define BCM_6348_UDC0_IRQ (IRQ_INTERNAL_BASE + 6) - #define BCM_6348_ENET1_IRQ (IRQ_INTERNAL_BASE + 7) - #define BCM_6348_ENET0_IRQ (IRQ_INTERNAL_BASE + 8) - #define BCM_6348_ENET_PHY_IRQ (IRQ_INTERNAL_BASE + 9) - #define BCM_6348_OHCI0_IRQ (IRQ_INTERNAL_BASE + 12) -+#define BCM_6348_USB_CNTL_RX_DMA_IRQ (IRQ_INTERNAL_BASE + 14) -+#define BCM_6348_USB_CNTL_TX_DMA_IRQ (IRQ_INTERNAL_BASE + 15) -+#define BCM_6348_USB_BULK_RX_DMA_IRQ (IRQ_INTERNAL_BASE + 16) -+#define BCM_6348_USB_BULK_TX_DMA_IRQ (IRQ_INTERNAL_BASE + 17) -+#define BCM_6348_USB_ISO_RX_DMA_IRQ (IRQ_INTERNAL_BASE + 18) -+#define BCM_6348_USB_ISO_TX_DMA_IRQ (IRQ_INTERNAL_BASE + 19) - #define BCM_6348_ENET0_RXDMA_IRQ (IRQ_INTERNAL_BASE + 20) - #define BCM_6348_ENET0_TXDMA_IRQ (IRQ_INTERNAL_BASE + 21) - #define BCM_6348_ENET1_RXDMA_IRQ (IRQ_INTERNAL_BASE + 22) ---- /dev/null -+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_udc.h -@@ -0,0 +1,6 @@ -+#ifndef BCM63XX_DEV_USB_UDC_H_ -+#define BCM63XX_DEV_USB_UDC_H_ -+ -+int bcm63xx_udc_register(void); -+ -+#endif /* BCM63XX_DEV_USB_UDC_H_ */ ---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h -+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h -@@ -47,6 +47,7 @@ struct board_info { - unsigned int has_dsp:1; - unsigned int has_uart0:1; - unsigned int has_uart1:1; -+ unsigned int has_udc0:1; - - /* ethernet config */ - struct bcm63xx_enet_platform_data enet0; ---- a/arch/mips/bcm63xx/Makefile -+++ b/arch/mips/bcm63xx/Makefile -@@ -1,6 +1,6 @@ - obj-y += clk.o cpu.o cs.o gpio.o irq.o prom.o setup.o timer.o \ - dev-dsp.o dev-enet.o dev-pcmcia.o dev-uart.o dev-wdt.o \ -- dev-usb-ohci.o dev-usb-ehci.o -+ dev-usb-ohci.o dev-usb-ehci.o dev-usb-udc.o - obj-$(CONFIG_EARLY_PRINTK) += early_printk.o - - obj-y += boards/ ---- a/arch/mips/bcm63xx/clk.c -+++ b/arch/mips/bcm63xx/clk.c -@@ -141,6 +141,30 @@ static struct clk clk_usbh = { - }; - - /* -+ * USB slave clock -+ */ -+static void usbs_set(struct clk *clk, int enable) -+{ -+ u32 mask; -+ -+ switch(bcm63xx_get_cpu_id()) { -+ case BCM6338_CPU_ID: -+ mask = CKCTL_6338_USBS_EN; -+ break; -+ case BCM6348_CPU_ID: -+ mask = CKCTL_6348_USBS_EN; -+ break; -+ default: -+ return; -+ } -+ bcm_hwclock_set(mask, enable); -+} -+ -+static struct clk clk_usbs = { -+ .set = usbs_set, -+}; -+ -+/* - * SPI clock - */ - static void spi_set(struct clk *clk, int enable) -@@ -208,6 +232,8 @@ struct clk *clk_get(struct device *dev, - return &clk_ephy; - if (!strcmp(id, "usbh")) - return &clk_usbh; -+ if (!strcmp(id, "usbs")) -+ return &clk_usbs; - if (!strcmp(id, "spi")) - return &clk_spi; - if (!strcmp(id, "periph")) ---- a/arch/mips/bcm63xx/Kconfig -+++ b/arch/mips/bcm63xx/Kconfig -@@ -7,6 +7,7 @@ config BCM63XX_CPU_6338 - select USB_ARCH_HAS_OHCI - select USB_OHCI_BIG_ENDIAN_DESC - select USB_OHCI_BIG_ENDIAN_MMIO -+ select USB_ARCH_HAS_UDC - - config BCM63XX_CPU_6345 - bool "support 6345 CPU" -@@ -19,6 +20,7 @@ config BCM63XX_CPU_6348 - select USB_ARCH_HAS_OHCI - select USB_OHCI_BIG_ENDIAN_DESC - select USB_OHCI_BIG_ENDIAN_MMIO -+ select USB_ARCH_HAS_UDC - - config BCM63XX_CPU_6358 - bool "support 6358 CPU" diff --git a/target/linux/brcm63xx/patches-2.6.37/200-extended-platform-devices.patch b/target/linux/brcm63xx/patches-2.6.37/200-extended-platform-devices.patch deleted file mode 100644 index db2c22f47..000000000 --- a/target/linux/brcm63xx/patches-2.6.37/200-extended-platform-devices.patch +++ /dev/null @@ -1,25 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -915,6 +915,9 @@ int __init board_register_devices(void) - if (board.has_udc0) - bcm63xx_udc_register(); - -+ if (board.num_devs) -+ platform_add_devices(board.devs, board.num_devs); -+ - /* read base address of boot chip select (0) */ - if (BCMCPU_IS_6345()) - val = 0x1fc00000; ---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h -+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h -@@ -61,6 +61,10 @@ struct board_info { - - /* Buttons */ - struct gpio_button buttons[2]; -+ -+ /* Additional platform devices */ -+ struct platform_device **devs; -+ unsigned int num_devs; - }; - - #endif /* ! BOARD_BCM963XX_H_ */ diff --git a/target/linux/brcm63xx/patches-2.6.37/200-spi-board-info.patch b/target/linux/brcm63xx/patches-2.6.37/200-spi-board-info.patch deleted file mode 100644 index 761ac9605..000000000 --- a/target/linux/brcm63xx/patches-2.6.37/200-spi-board-info.patch +++ /dev/null @@ -1,25 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -918,6 +918,9 @@ int __init board_register_devices(void) - if (board.num_devs) - platform_add_devices(board.devs, board.num_devs); - -+ if (board.num_spis) -+ spi_register_board_info(board.spis, board.num_spis); -+ - /* read base address of boot chip select (0) */ - if (BCMCPU_IS_6345()) - val = 0x1fc00000; ---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h -+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h -@@ -65,6 +65,10 @@ struct board_info { - /* Additional platform devices */ - struct platform_device **devs; - unsigned int num_devs; -+ -+ /* Additional platform devices */ -+ struct spi_board_info *spis; -+ unsigned int num_spis; - }; - - #endif /* ! BOARD_BCM963XX_H_ */ diff --git a/target/linux/brcm63xx/patches-2.6.37/210-no_ehci_over_current_check.patch b/target/linux/brcm63xx/patches-2.6.37/210-no_ehci_over_current_check.patch deleted file mode 100644 index 513ff999a..000000000 --- a/target/linux/brcm63xx/patches-2.6.37/210-no_ehci_over_current_check.patch +++ /dev/null @@ -1,16 +0,0 @@ ---- a/drivers/usb/host/ehci-hub.c -+++ b/drivers/usb/host/ehci-hub.c -@@ -882,11 +882,13 @@ static int ehci_hub_control ( - * power switching; they're allowed to just limit the - * current. khubd will turn the power back on. - */ -+#ifndef CONFIG_BCM63XX - if (HCS_PPC (ehci->hcs_params)){ - ehci_writel(ehci, - temp & ~(PORT_RWC_BITS | PORT_POWER), - status_reg); - } -+#endif - } - - /* whoever resumes must GetPortStatus to complete it!! */ diff --git a/target/linux/brcm63xx/patches-2.6.37/220-wl_exports.patch b/target/linux/brcm63xx/patches-2.6.37/220-wl_exports.patch deleted file mode 100644 index 8cd87b8df..000000000 --- a/target/linux/brcm63xx/patches-2.6.37/220-wl_exports.patch +++ /dev/null @@ -1,34 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -39,6 +39,13 @@ static unsigned int mac_addr_used; - static struct board_info board; - - /* -+ * Required export for WL -+ */ -+#define NVRAM_SPACE 0x8000 -+char nvram_buf[NVRAM_SPACE]; -+EXPORT_SYMBOL(nvram_buf); -+ -+/* - * known 6338 boards - */ - #ifdef CONFIG_BCM63XX_CPU_6338 -@@ -747,6 +754,7 @@ void __init board_prom_init(void) - - /* extract nvram data */ - memcpy(&nvram, boot_addr + BCM963XX_NVRAM_OFFSET, sizeof(nvram)); -+ memcpy(&nvram_buf, boot_addr + BCM963XX_NVRAM_OFFSET, NVRAM_SPACE); - - /* check checksum before using data */ - if (nvram.version <= 4) ---- a/arch/mips/mm/cache.c -+++ b/arch/mips/mm/cache.c -@@ -52,6 +52,7 @@ void (*_dma_cache_wback)(unsigned long s - void (*_dma_cache_inv)(unsigned long start, unsigned long size); - - EXPORT_SYMBOL(_dma_cache_wback_inv); -+EXPORT_SYMBOL(_dma_cache_inv); - - #endif /* CONFIG_DMA_NONCOHERENT */ - diff --git a/target/linux/brcm63xx/patches-2.6.37/230-6358-enet1-external-mii-clk.patch b/target/linux/brcm63xx/patches-2.6.37/230-6358-enet1-external-mii-clk.patch deleted file mode 100644 index d859410b7..000000000 --- a/target/linux/brcm63xx/patches-2.6.37/230-6358-enet1-external-mii-clk.patch +++ /dev/null @@ -1,22 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -818,6 +818,8 @@ void __init board_prom_init(void) - if (BCMCPU_IS_6348()) - val |= GPIO_MODE_6348_G3_EXT_MII | - GPIO_MODE_6348_G0_EXT_MII; -+ else if (BCMCPU_IS_6358()) -+ val |= GPIO_MODE_6358_ENET1_MII_CLK_INV; - } - - bcm_gpio_writel(val, GPIO_MODE_REG); ---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h -+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h -@@ -402,6 +402,8 @@ - #define GPIO_MODE_6358_EXTRA_SPI_SS (1 << 7) - #define GPIO_MODE_6358_SERIAL_LED (1 << 10) - #define GPIO_MODE_6358_UTOPIA (1 << 12) -+#define GPIO_MODE_6358_ENET0_MII_CLK_INV (1 << 30) -+#define GPIO_MODE_6358_ENET1_MII_CLK_INV (1 << 31) - - - /************************************************************************* diff --git a/target/linux/brcm63xx/patches-2.6.37/240-spi.patch b/target/linux/brcm63xx/patches-2.6.37/240-spi.patch deleted file mode 100644 index 3af663e1c..000000000 --- a/target/linux/brcm63xx/patches-2.6.37/240-spi.patch +++ /dev/null @@ -1,1002 +0,0 @@ ---- a/arch/mips/bcm63xx/cpu.c -+++ b/arch/mips/bcm63xx/cpu.c -@@ -58,6 +58,7 @@ static const unsigned long bcm96338_regs - - static const int bcm96338_irqs[] = { - [IRQ_TIMER] = BCM_6338_TIMER_IRQ, -+ [IRQ_SPI] = BCM_6338_SPI_IRQ, - [IRQ_UART0] = BCM_6338_UART0_IRQ, - [IRQ_DSL] = BCM_6338_DSL_IRQ, - [IRQ_ENET0] = BCM_6338_ENET0_IRQ, -@@ -132,6 +133,7 @@ static const unsigned long bcm96348_regs - - static const int bcm96348_irqs[] = { - [IRQ_TIMER] = BCM_6348_TIMER_IRQ, -+ [IRQ_SPI] = BCM_6348_SPI_IRQ, - [IRQ_UART0] = BCM_6348_UART0_IRQ, - [IRQ_DSL] = BCM_6348_DSL_IRQ, - [IRQ_ENET0] = BCM_6348_ENET0_IRQ, -@@ -175,6 +177,7 @@ static const unsigned long bcm96358_regs - - static const int bcm96358_irqs[] = { - [IRQ_TIMER] = BCM_6358_TIMER_IRQ, -+ [IRQ_SPI] = BCM_6358_SPI_IRQ, - [IRQ_UART0] = BCM_6358_UART0_IRQ, - [IRQ_UART1] = BCM_6358_UART1_IRQ, - [IRQ_DSL] = BCM_6358_DSL_IRQ, ---- /dev/null -+++ b/arch/mips/bcm63xx/dev-spi.c -@@ -0,0 +1,128 @@ -+/* -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file "COPYING" in the main directory of this archive -+ * for more details. -+ * -+ * Copyright (C) 2009 Florian Fainelli <florian@openwrt.org> -+ * Copyright (C) 2010 Tanguy Bouzeloc <tanguy.bouzeloc@efixo.com> -+ */ -+ -+#include <linux/init.h> -+#include <linux/kernel.h> -+#include <linux/platform_device.h> -+ -+#include <bcm63xx_cpu.h> -+#include <bcm63xx_dev_spi.h> -+#include <bcm63xx_regs.h> -+ -+#ifdef BCMCPU_RUNTIME_DETECT -+/* -+ * register offsets -+ */ -+static const unsigned long bcm96338_regs_spi[] = { -+ [SPI_CMD] = SPI_BCM_6338_SPI_CMD, -+ [SPI_INT_STATUS] = SPI_BCM_6338_SPI_INT_STATUS, -+ [SPI_INT_MASK_ST] = SPI_BCM_6338_SPI_MASK_INT_ST, -+ [SPI_INT_MASK] = SPI_BCM_6338_SPI_INT_MASK, -+ [SPI_ST] = SPI_BCM_6338_SPI_ST, -+ [SPI_CLK_CFG] = SPI_BCM_6338_SPI_CLK_CFG, -+ [SPI_FILL_BYTE] = SPI_BCM_6338_SPI_FILL_BYTE, -+ [SPI_MSG_TAIL] = SPI_BCM_6338_SPI_MSG_TAIL, -+ [SPI_RX_TAIL] = SPI_BCM_6338_SPI_RX_TAIL, -+ [SPI_MSG_CTL] = SPI_BCM_6338_SPI_MSG_CTL, -+ [SPI_MSG_DATA] = SPI_BCM_6338_SPI_MSG_DATA, -+ [SPI_RX_DATA] = SPI_BCM_6338_SPI_RX_DATA, -+}; -+ -+static const unsigned long bcm96348_regs_spi[] = { -+ [SPI_CMD] = SPI_BCM_6348_SPI_CMD, -+ [SPI_INT_STATUS] = SPI_BCM_6348_SPI_INT_STATUS, -+ [SPI_INT_MASK_ST] = SPI_BCM_6348_SPI_MASK_INT_ST, -+ [SPI_INT_MASK] = SPI_BCM_6348_SPI_INT_MASK, -+ [SPI_ST] = SPI_BCM_6348_SPI_ST, -+ [SPI_CLK_CFG] = SPI_BCM_6348_SPI_CLK_CFG, -+ [SPI_FILL_BYTE] = SPI_BCM_6348_SPI_FILL_BYTE, -+ [SPI_MSG_TAIL] = SPI_BCM_6348_SPI_MSG_TAIL, -+ [SPI_RX_TAIL] = SPI_BCM_6348_SPI_RX_TAIL, -+ [SPI_MSG_CTL] = SPI_BCM_6348_SPI_MSG_CTL, -+ [SPI_MSG_DATA] = SPI_BCM_6348_SPI_MSG_DATA, -+ [SPI_RX_DATA] = SPI_BCM_6348_SPI_RX_DATA, -+}; -+ -+static const unsigned long bcm96358_regs_spi[] = { -+ [SPI_CMD] = SPI_BCM_6358_SPI_CMD, -+ [SPI_INT_STATUS] = SPI_BCM_6358_SPI_INT_STATUS, -+ [SPI_INT_MASK_ST] = SPI_BCM_6358_SPI_MASK_INT_ST, -+ [SPI_INT_MASK] = SPI_BCM_6358_SPI_INT_MASK, -+ [SPI_ST] = SPI_BCM_6358_SPI_STATUS, -+ [SPI_CLK_CFG] = SPI_BCM_6358_SPI_CLK_CFG, -+ [SPI_FILL_BYTE] = SPI_BCM_6358_SPI_FILL_BYTE, -+ [SPI_MSG_TAIL] = SPI_BCM_6358_SPI_MSG_TAIL, -+ [SPI_RX_TAIL] = SPI_BCM_6358_SPI_RX_TAIL, -+ [SPI_MSG_CTL] = SPI_BCM_6358_MSG_CTL, -+ [SPI_MSG_DATA] = SPI_BCM_6358_SPI_MSG_DATA, -+ [SPI_RX_DATA] = SPI_BCM_6358_SPI_RX_DATA, -+}; -+ -+const unsigned long *bcm63xx_regs_spi; -+EXPORT_SYMBOL(bcm63xx_regs_spi); -+ -+static __init void bcm63xx_spi_regs_init(void) -+{ -+ if (BCMCPU_IS_6338()) -+ bcm63xx_regs_spi = bcm96338_regs_spi; -+ if (BCMCPU_IS_6348()) -+ bcm63xx_regs_spi = bcm96348_regs_spi; -+ if (BCMCPU_IS_6358()) -+ bcm63xx_regs_spi = bcm96358_regs_spi; -+} -+#else -+static __init void bcm63xx_spi_regs_init(void) { } -+#endif -+ -+static struct resource spi_resources[] = { -+ { -+ .start = -1, /* filled at runtime */ -+ .end = -1, /* filled at runtime */ -+ .flags = IORESOURCE_MEM, -+ }, -+ { -+ .start = -1, /* filled at runtime */ -+ .flags = IORESOURCE_IRQ, -+ }, -+}; -+ -+static struct bcm63xx_spi_pdata spi_pdata = { -+ .bus_num = 0, -+ .num_chipselect = 8, -+ .speed_hz = 50000000, /* Fclk */ -+}; -+ -+static struct platform_device bcm63xx_spi_device = { -+ .name = "bcm63xx-spi", -+ .id = 0, -+ .num_resources = ARRAY_SIZE(spi_resources), -+ .resource = spi_resources, -+ .dev = { -+ .platform_data = &spi_pdata, -+ }, -+}; -+ -+int __init bcm63xx_spi_register(void) -+{ -+ spi_resources[0].start = bcm63xx_regset_address(RSET_SPI); -+ spi_resources[0].end = spi_resources[0].start; -+ spi_resources[0].end += RSET_SPI_SIZE - 1; -+ spi_resources[1].start = bcm63xx_get_irq_number(IRQ_SPI); -+ -+ /* Fill in platform data */ -+ if (BCMCPU_IS_6338() || BCMCPU_IS_6348()) -+ spi_pdata.fifo_size = SPI_BCM_6338_SPI_MSG_DATA_SIZE; -+ -+ if (BCMCPU_IS_6358()) -+ spi_pdata.fifo_size = SPI_BCM_6358_SPI_MSG_DATA_SIZE; -+ -+ bcm63xx_spi_regs_init(); -+ -+ return platform_device_register(&bcm63xx_spi_device); -+} ---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h -+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h -@@ -109,6 +109,7 @@ enum bcm63xx_regs_set { - #define RSET_WDT_SIZE 12 - #define RSET_ENET_SIZE 2048 - #define RSET_ENETDMA_SIZE 2048 -+#define RSET_SPI_SIZE 256 - #define RSET_UART_SIZE 24 - #define RSET_UDC_SIZE 256 - #define RSET_OHCI_SIZE 256 -@@ -214,7 +215,7 @@ enum bcm63xx_regs_set { - #define BCM_6358_UART0_BASE (0xfffe0100) - #define BCM_6358_UART1_BASE (0xfffe0120) - #define BCM_6358_GPIO_BASE (0xfffe0080) --#define BCM_6358_SPI_BASE (0xdeadbeef) -+#define BCM_6358_SPI_BASE (0xfffe0800) - #define BCM_6358_UDC0_BASE (0xfffe0400) - #define BCM_6358_OHCI0_BASE (0xfffe1400) - #define BCM_6358_OHCI_PRIV_BASE (0xdeadbeef) -@@ -441,6 +442,7 @@ static inline unsigned long bcm63xx_regs - */ - enum bcm63xx_irq { - IRQ_TIMER = 0, -+ IRQ_SPI, - IRQ_UART0, - IRQ_UART1, - IRQ_DSL, -@@ -507,6 +509,7 @@ enum bcm63xx_irq { - * 6348 irqs - */ - #define BCM_6348_TIMER_IRQ (IRQ_INTERNAL_BASE + 0) -+#define BCM_6348_SPI_IRQ (IRQ_INTERNAL_BASE + 1) - #define BCM_6348_UART0_IRQ (IRQ_INTERNAL_BASE + 2) - #define BCM_6348_DSL_IRQ (IRQ_INTERNAL_BASE + 4) - #define BCM_6348_UDC0_IRQ (IRQ_INTERNAL_BASE + 6) -@@ -531,6 +534,7 @@ enum bcm63xx_irq { - * 6358 irqs - */ - #define BCM_6358_TIMER_IRQ (IRQ_INTERNAL_BASE + 0) -+#define BCM_6358_SPI_IRQ (IRQ_INTERNAL_BASE + 1) - #define BCM_6358_UART0_IRQ (IRQ_INTERNAL_BASE + 2) - #define BCM_6358_UART1_IRQ (IRQ_INTERNAL_BASE + 3) - #define BCM_6358_OHCI0_IRQ (IRQ_INTERNAL_BASE + 5) ---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h -+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h -@@ -771,4 +771,116 @@ - #define DMIPSPLLCFG_N2_SHIFT 29 - #define DMIPSPLLCFG_N2_MASK (0x7 << DMIPSPLLCFG_N2_SHIFT) - -+/************************************************************************* -+ * _REG relative to RSET_SPI -+ *************************************************************************/ -+ -+/* BCM 6338 SPI core */ -+#define SPI_BCM_6338_SPI_CMD 0x00 /* 16-bits register */ -+#define SPI_BCM_6338_SPI_INT_STATUS 0x02 -+#define SPI_BCM_6338_SPI_MASK_INT_ST 0x03 -+#define SPI_BCM_6338_SPI_INT_MASK 0x04 -+#define SPI_BCM_6338_SPI_ST 0x05 -+#define SPI_BCM_6338_SPI_CLK_CFG 0x06 -+#define SPI_BCM_6338_SPI_FILL_BYTE 0x07 -+#define SPI_BCM_6338_SPI_MSG_TAIL 0x09 -+#define SPI_BCM_6338_SPI_RX_TAIL 0x0b -+#define SPI_BCM_6338_SPI_MSG_CTL 0x40 -+#define SPI_BCM_6338_SPI_MSG_DATA 0x41 -+#define SPI_BCM_6338_SPI_MSG_DATA_SIZE 0x3f -+#define SPI_BCM_6338_SPI_RX_DATA 0x80 -+#define SPI_BCM_6338_SPI_RX_DATA_SIZE 0x3f -+ -+/* BCM 6348 SPI core */ -+#define SPI_BCM_6348_SPI_MASK_INT_ST 0x00 -+#define SPI_BCM_6348_SPI_INT_STATUS 0x01 -+#define SPI_BCM_6348_SPI_CMD 0x02 /* 16-bits register */ -+#define SPI_BCM_6348_SPI_FILL_BYTE 0x04 -+#define SPI_BCM_6348_SPI_CLK_CFG 0x05 -+#define SPI_BCM_6348_SPI_ST 0x06 -+#define SPI_BCM_6348_SPI_INT_MASK 0x07 -+#define SPI_BCM_6348_SPI_RX_TAIL 0x08 -+#define SPI_BCM_6348_SPI_MSG_TAIL 0x10 -+#define SPI_BCM_6348_SPI_MSG_DATA 0x40 -+#define SPI_BCM_6348_SPI_MSG_CTL 0x42 -+#define SPI_BCM_6348_SPI_MSG_DATA_SIZE 0x3f -+#define SPI_BCM_6348_SPI_RX_DATA 0x80 -+#define SPI_BCM_6348_SPI_RX_DATA_SIZE 0x3f -+ -+/* BCM 6358 SPI core */ -+#define SPI_BCM_6358_MSG_CTL 0x00 /* 16-bits register */ -+ -+#define SPI_BCM_6358_SPI_MSG_DATA 0x02 -+#define SPI_BCM_6358_SPI_MSG_DATA_SIZE 0x21e -+ -+#define SPI_BCM_6358_SPI_RX_DATA 0x400 -+#define SPI_BCM_6358_SPI_RX_DATA_SIZE 0x220 -+ -+#define SPI_BCM_6358_SPI_CMD 0x700 /* 16-bits register */ -+ -+#define SPI_BCM_6358_SPI_INT_STATUS 0x702 -+#define SPI_BCM_6358_SPI_MASK_INT_ST 0x703 -+ -+#define SPI_BCM_6358_SPI_INT_MASK 0x704 -+ -+#define SPI_BCM_6358_SPI_STATUS 0x705 -+ -+#define SPI_BCM_6358_SPI_CLK_CFG 0x706 -+ -+#define SPI_BCM_6358_SPI_FILL_BYTE 0x707 -+#define SPI_BCM_6358_SPI_MSG_TAIL 0x709 -+#define SPI_BCM_6358_SPI_RX_TAIL 0x70B -+ -+/* Shared SPI definitions */ -+ -+/* Message configuration */ -+#define SPI_FD_RW 0x00 -+#define SPI_HD_W 0x01 -+#define SPI_HD_R 0x02 -+#define SPI_BYTE_CNT_SHIFT 0 -+#define SPI_MSG_TYPE_SHIFT 14 -+ -+/* Command */ -+#define SPI_CMD_NOOP 0x01 -+#define SPI_CMD_SOFT_RESET 0x02 -+#define SPI_CMD_HARD_RESET 0x04 -+#define SPI_CMD_START_IMMEDIATE 0x08 -+#define SPI_CMD_COMMAND_SHIFT 0 -+#define SPI_CMD_COMMAND_MASK 0x000f -+#define SPI_CMD_DEVICE_ID_SHIFT 4 -+#define SPI_CMD_PREPEND_BYTE_CNT_SHIFT 8 -+#define SPI_CMD_ONE_BYTE_SHIFT 11 -+#define SPI_CMD_ONE_WIRE_SHIFT 12 -+#define SPI_DEV_ID_0 0 -+#define SPI_DEV_ID_1 1 -+#define SPI_DEV_ID_2 2 -+#define SPI_DEV_ID_3 3 -+ -+/* Interrupt mask */ -+#define SPI_INTR_CMD_DONE 0x01 -+#define SPI_INTR_RX_OVERFLOW 0x02 -+#define SPI_INTR_TX_UNDERFLOW 0x04 -+#define SPI_INTR_TX_OVERFLOW 0x08 -+#define SPI_INTR_RX_UNDERFLOW 0x10 -+#define SPI_INTR_CLEAR_ALL 0x1f -+ -+/* Status */ -+#define SPI_RX_EMPTY 0x02 -+#define SPI_CMD_BUSY 0x04 -+#define SPI_SERIAL_BUSY 0x08 -+ -+/* Clock configuration */ -+#define SPI_CLK_20MHZ 0x00 -+#define SPI_CLK_0_391MHZ 0x01 -+#define SPI_CLK_0_781MHZ 0x02 /* default */ -+#define SPI_CLK_1_563MHZ 0x03 -+#define SPI_CLK_3_125MHZ 0x04 -+#define SPI_CLK_6_250MHZ 0x05 -+#define SPI_CLK_12_50MHZ 0x06 -+#define SPI_CLK_25MHZ 0x07 -+#define SPI_CLK_MASK 0x07 -+#define SPI_SSOFFTIME_MASK 0x38 -+#define SPI_SSOFFTIME_SHIFT 3 -+#define SPI_BYTE_SWAP 0x80 -+ - #endif /* BCM63XX_REGS_H_ */ ---- /dev/null -+++ b/drivers/spi/bcm63xx_spi.c -@@ -0,0 +1,496 @@ -+/* -+ * Broadcom BCM63xx SPI controller support -+ * -+ * Copyright (C) 2009 Florian Fainelli <florian@openwrt.org> -+ * Copyright (C) 2010 Tanguy Bouzeloc <tanguy.bouzeloc@efixo.com> -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * as published by the Free Software Foundation; either version 2 -+ * of the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the -+ * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, -+ */ -+ -+#include <linux/kernel.h> -+#include <linux/init.h> -+#include <linux/clk.h> -+#include <linux/module.h> -+#include <linux/platform_device.h> -+#include <linux/delay.h> -+#include <linux/interrupt.h> -+#include <linux/spi/spi.h> -+#include <linux/completion.h> -+#include <linux/err.h> -+ -+#include <bcm63xx_dev_spi.h> -+ -+#define PFX KBUILD_MODNAME -+#define DRV_VER "0.1.2" -+ -+struct bcm63xx_spi { -+ spinlock_t lock; -+ int stopping; -+ struct completion done; -+ -+ void __iomem *regs; -+ int irq; -+ -+ /* Platform data */ -+ u32 speed_hz; -+ unsigned fifo_size; -+ -+ /* Data buffers */ -+ const unsigned char *tx_ptr; -+ unsigned char *rx_ptr; -+ -+ /* data iomem */ -+ u8 __iomem *tx_io; -+ const u8 __iomem *rx_io; -+ -+ int remaining_bytes; -+ -+ struct clk *clk; -+ struct platform_device *pdev; -+}; -+ -+static inline u8 bcm_spi_readb(struct bcm63xx_spi *bs, -+ unsigned int offset) -+{ -+ return bcm_readw(bs->regs + bcm63xx_spireg(offset)); -+} -+ -+static inline u16 bcm_spi_readw(struct bcm63xx_spi *bs, -+ unsigned int offset) -+{ -+ return bcm_readw(bs->regs + bcm63xx_spireg(offset)); -+} -+ -+static inline void bcm_spi_writeb(struct bcm63xx_spi *bs, -+ u8 value, unsigned int offset) -+{ -+ bcm_writeb(value, bs->regs + bcm63xx_spireg(offset)); -+} -+ -+static inline void bcm_spi_writew(struct bcm63xx_spi *bs, -+ u16 value, unsigned int offset) -+{ -+ bcm_writew(value, bs->regs + bcm63xx_spireg(offset)); -+} -+ -+static int bcm63xx_spi_setup_transfer(struct spi_device *spi, -+ struct spi_transfer *t) -+{ -+ u8 bits_per_word; -+ u8 clk_cfg; -+ u32 hz; -+ unsigned int div; -+ -+ struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master); -+ -+ bits_per_word = (t) ? t->bits_per_word : spi->bits_per_word; -+ hz = (t) ? t->speed_hz : spi->max_speed_hz; -+ if (bits_per_word != 8) { -+ dev_err(&spi->dev, "%s, unsupported bits_per_word=%d\n", -+ __func__, bits_per_word); -+ return -EINVAL; -+ } -+ -+ if (spi->chip_select > spi->master->num_chipselect) { -+ dev_err(&spi->dev, "%s, unsupported slave %d\n", -+ __func__, spi->chip_select); -+ return -EINVAL; -+ } -+ -+ /* Check clock setting */ -+ div = (bs->speed_hz / hz); -+ switch (div) { -+ case 2: -+ clk_cfg = SPI_CLK_25MHZ; -+ break; -+ case 4: -+ clk_cfg = SPI_CLK_12_50MHZ; -+ break; -+ case 8: -+ clk_cfg = SPI_CLK_6_250MHZ; -+ break; -+ case 16: -+ clk_cfg = SPI_CLK_3_125MHZ; -+ break; -+ case 32: -+ clk_cfg = SPI_CLK_1_563MHZ; -+ break; -+ case 64: -+ clk_cfg = SPI_CLK_0_781MHZ; -+ break; -+ case 128: -+ default: -+ /* Set to slowest mode for compatibility */ -+ clk_cfg = SPI_CLK_0_391MHZ; -+ break; -+ } -+ -+ bcm_spi_writeb(bs, clk_cfg, SPI_CLK_CFG); -+ dev_dbg(&spi->dev, "Setting clock register to %d (hz %d, cmd %02x)\n", -+ div, hz, clk_cfg); -+ -+ return 0; -+} -+ -+/* the spi->mode bits understood by this driver: */ -+#define MODEBITS (SPI_CPOL | SPI_CPHA) -+ -+static int bcm63xx_spi_setup(struct spi_device *spi) -+{ -+ struct bcm63xx_spi *bs; -+ int ret; -+ -+ bs = spi_master_get_devdata(spi->master); -+ -+ if (bs->stopping) -+ return -ESHUTDOWN; -+ -+ if (!spi->bits_per_word) -+ spi->bits_per_word = 8; -+ -+ if (spi->mode & ~MODEBITS) { -+ dev_err(&spi->dev, "%s, unsupported mode bits %x\n", -+ __func__, spi->mode & ~MODEBITS); -+ return -EINVAL; -+ } -+ -+ ret = bcm63xx_spi_setup_transfer(spi, NULL); -+ if (ret < 0) { -+ dev_err(&spi->dev, "setup: unsupported mode bits %x\n", -+ spi->mode & ~MODEBITS); -+ return ret; -+ } -+ -+ dev_dbg(&spi->dev, "%s, mode %d, %u bits/w, %u nsec/bit\n", -+ __func__, spi->mode & MODEBITS, spi->bits_per_word, 0); -+ -+ return 0; -+} -+ -+/* Fill the TX FIFO with as many bytes as possible */ -+static void bcm63xx_spi_fill_tx_fifo(struct bcm63xx_spi *bs) -+{ -+ u8 size; -+ -+ /* Fill the Tx FIFO with as many bytes as possible */ -+ size = bs->remaining_bytes < bs->fifo_size ? bs->remaining_bytes : -+ bs->fifo_size; -+ memcpy_toio(bs->tx_io, bs->tx_ptr, size); -+ bs->remaining_bytes -= size; -+} -+ -+static int bcm63xx_txrx_bufs(struct spi_device *spi, struct spi_transfer *t) -+{ -+ struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master); -+ u16 msg_ctl; -+ u16 cmd; -+ -+ dev_dbg(&spi->dev, "txrx: tx %p, rx %p, len %d\n", -+ t->tx_buf, t->rx_buf, t->len); -+ -+ /* Transmitter is inhibited */ -+ bs->tx_ptr = t->tx_buf; -+ bs->rx_ptr = t->rx_buf; -+ init_completion(&bs->done); -+ -+ if (t->tx_buf) { -+ bs->remaining_bytes = t->len; -+ bcm63xx_spi_fill_tx_fifo(bs); -+ } -+ -+ /* Enable the command done interrupt which -+ * we use to determine completion of a command */ -+ bcm_spi_writeb(bs, SPI_INTR_CMD_DONE, SPI_INT_MASK); -+ -+ /* Fill in the Message control register */ -+ msg_ctl = (t->len << SPI_BYTE_CNT_SHIFT); -+ -+ if (t->rx_buf && t->tx_buf) -+ msg_ctl |= (SPI_FD_RW << SPI_MSG_TYPE_SHIFT); -+ else if (t->rx_buf) -+ msg_ctl |= (SPI_HD_R << SPI_MSG_TYPE_SHIFT); -+ else if (t->tx_buf) -+ msg_ctl |= (SPI_HD_W << SPI_MSG_TYPE_SHIFT); -+ -+ bcm_spi_writew(bs, msg_ctl, SPI_MSG_CTL); -+ -+ /* Issue the transfer */ -+ cmd = SPI_CMD_START_IMMEDIATE; -+ cmd |= (0 << SPI_CMD_PREPEND_BYTE_CNT_SHIFT); -+ cmd |= (spi->chip_select << SPI_CMD_DEVICE_ID_SHIFT); -+ bcm_spi_writew(bs, cmd, SPI_CMD); -+ wait_for_completion(&bs->done); -+ -+ /* Disable the CMD_DONE interrupt */ -+ bcm_spi_writeb(bs, 0, SPI_INT_MASK); -+ -+ return t->len - bs->remaining_bytes; -+} -+ -+static int bcm63xx_transfer(struct spi_device *spi, struct spi_message *m) -+{ -+ struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master); -+ struct spi_transfer *t; -+ int ret = 0; -+ -+ if (unlikely(list_empty(&m->transfers))) -+ return -EINVAL; -+ -+ if (bs->stopping) -+ return -ESHUTDOWN; -+ -+ list_for_each_entry(t, &m->transfers, transfer_list) { -+ ret += bcm63xx_txrx_bufs(spi, t); -+ } -+ -+ m->complete(m->context); -+ -+ return ret; -+} -+ -+/* This driver supports single master mode only. Hence -+ * CMD_DONE is the only interrupt we care about -+ */ -+static irqreturn_t bcm63xx_spi_interrupt(int irq, void *dev_id) -+{ -+ struct spi_master *master = (struct spi_master *)dev_id; -+ struct bcm63xx_spi *bs = spi_master_get_devdata(master); -+ u8 intr; -+ u16 cmd; -+ -+ /* Read interupts and clear them immediately */ -+ intr = bcm_spi_readb(bs, SPI_INT_STATUS); -+ bcm_spi_writeb(bs, SPI_INTR_CLEAR_ALL, SPI_INT_STATUS); -+ bcm_spi_writeb(bs, 0, SPI_INT_MASK); -+ -+ /* A tansfer completed */ -+ if (intr & SPI_INTR_CMD_DONE) { -+ u8 rx_tail; -+ -+ rx_tail = bcm_spi_readb(bs, SPI_RX_TAIL); -+ -+ /* Read out all the data */ -+ if (rx_tail) -+ memcpy_fromio(bs->rx_ptr, bs->rx_io, rx_tail); -+ -+ /* See if there is more data to send */ -+ if (bs->remaining_bytes > 0) { -+ bcm63xx_spi_fill_tx_fifo(bs); -+ -+ /* Start the transfer */ -+ bcm_spi_writew(bs, SPI_HD_W << SPI_MSG_TYPE_SHIFT, -+ SPI_MSG_CTL); -+ cmd = bcm_spi_readw(bs, SPI_CMD); -+ cmd |= SPI_CMD_START_IMMEDIATE; -+ cmd |= (0 << SPI_CMD_PREPEND_BYTE_CNT_SHIFT); -+ bcm_spi_writeb(bs, SPI_INTR_CMD_DONE, SPI_INT_MASK); -+ bcm_spi_writew(bs, cmd, SPI_CMD); -+ } else { -+ complete(&bs->done); -+ } -+ } -+ -+ return IRQ_HANDLED; -+} -+ -+ -+static int __init bcm63xx_spi_probe(struct platform_device *pdev) -+{ -+ struct resource *r; -+ struct device *dev = &pdev->dev; -+ struct bcm63xx_spi_pdata *pdata = pdev->dev.platform_data; -+ int irq; -+ struct spi_master *master; -+ struct clk *clk; -+ struct bcm63xx_spi *bs; -+ int ret; -+ -+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ if (!r) { -+ dev_err(dev, "no iomem\n"); -+ ret = -ENXIO; -+ goto out; -+ } -+ -+ irq = platform_get_irq(pdev, 0); -+ if (irq < 0) { -+ dev_err(dev, "no irq\n"); -+ ret = -ENXIO; -+ goto out; -+ } -+ -+ clk = clk_get(dev, "spi"); -+ if (IS_ERR(clk)) { -+ dev_err(dev, "no clock for device\n"); -+ ret = -ENODEV; -+ goto out; -+ } -+ -+ master = spi_alloc_master(dev, sizeof(*bs)); -+ if (!master) { -+ dev_err(dev, "out of memory\n"); -+ ret = -ENOMEM; -+ goto out_free; -+ } -+ -+ bs = spi_master_get_devdata(master); -+ init_completion(&bs->done); -+ -+ platform_set_drvdata(pdev, master); -+ bs->pdev = pdev; -+ -+ if (!request_mem_region(r->start, r->end - r->start, PFX)) { -+ dev_err(dev, "iomem request failed\n"); -+ ret = -ENXIO; -+ goto out_put_master; -+ } -+ -+ bs->regs = ioremap_nocache(r->start, r->end - r->start); -+ if (!bs->regs) { -+ dev_err(dev, "unable to ioremap regs\n"); -+ ret = -ENOMEM; -+ goto out_put_master; -+ } -+ bs->irq = irq; -+ bs->clk = clk; -+ bs->fifo_size = pdata->fifo_size; -+ -+ ret = request_irq(irq, bcm63xx_spi_interrupt, 0, pdev->name, master); -+ if (ret) { -+ dev_err(dev, "unable to request irq\n"); -+ goto out_unmap; -+ } -+ -+ master->bus_num = pdata->bus_num; -+ master->num_chipselect = pdata->num_chipselect; -+ master->setup = bcm63xx_spi_setup; -+ master->transfer = bcm63xx_transfer; -+ bs->speed_hz = pdata->speed_hz; -+ bs->stopping = 0; -+ bs->tx_io = (u8*)(bs->regs + bcm63xx_spireg(SPI_MSG_DATA)); -+ bs->rx_io = (const u8*)(bs->regs + bcm63xx_spireg(SPI_RX_DATA)); -+ spin_lock_init(&bs->lock); -+ -+ /* Initialize hardware */ -+ clk_enable(bs->clk); -+ bcm_spi_writeb(bs, SPI_INTR_CLEAR_ALL, SPI_INT_STATUS); -+ -+ /* register and we are done */ -+ ret = spi_register_master(master); -+ if (ret) { -+ dev_err(dev, "spi register failed\n"); -+ goto out_reset_hw; -+ } -+ -+ dev_info(dev, "at 0x%08x (irq %d, FIFOs size %d) v%s\n", -+ r->start, irq, bs->fifo_size, DRV_VER); -+ -+ return 0; -+ -+out_reset_hw: -+ clk_disable(clk); -+ free_irq(irq, master); -+out_unmap: -+ iounmap(bs->regs); -+out_put_master: -+ spi_master_put(master); -+out_free: -+ clk_put(clk); -+out: -+ return ret; -+} -+ -+static int __exit bcm63xx_spi_remove(struct platform_device *pdev) -+{ -+ struct spi_master *master = platform_get_drvdata(pdev); -+ struct bcm63xx_spi *bs = spi_master_get_devdata(master); -+ struct resource *r = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ -+ /* reset spi block */ -+ bcm_spi_writeb(bs, 0, SPI_INT_MASK); -+ spin_lock(&bs->lock); -+ bs->stopping = 1; -+ -+ /* HW shutdown */ -+ clk_disable(bs->clk); -+ clk_put(bs->clk); -+ -+ spin_unlock(&bs->lock); -+ -+ free_irq(bs->irq, master); -+ iounmap(bs->regs); -+ release_mem_region(r->start, r->end - r->start); -+ platform_set_drvdata(pdev, 0); -+ spi_unregister_master(master); -+ -+ return 0; -+} -+ -+#ifdef CONFIG_PM -+static int bcm63xx_spi_suspend(struct platform_device *pdev, pm_message_t mesg) -+{ -+ struct spi_master *master = platform_get_drvdata(pdev); -+ struct bcm63xx_spi *bs = spi_master_get_devdata(master); -+ -+ clk_disable(bs->clk); -+ -+ return 0; -+} -+ -+static int bcm63xx_spi_resume(struct platform_device *pdev) -+{ -+ struct spi_master *master = platform_get_drvdata(pdev); -+ struct bcm63xx_spi *bs = spi_master_get_devdata(master); -+ -+ clk_enable(bs->clk); -+ -+ return 0; -+} -+#else -+#define bcm63xx_spi_suspend NULL -+#define bcm63xx_spi_resume NULL -+#endif -+ -+static struct platform_driver bcm63xx_spi_driver = { -+ .driver = { -+ .name = "bcm63xx-spi", -+ .owner = THIS_MODULE, -+ }, -+ .probe = bcm63xx_spi_probe, -+ .remove = __exit_p(bcm63xx_spi_remove), -+ .suspend = bcm63xx_spi_suspend, -+ .resume = bcm63xx_spi_resume, -+}; -+ -+ -+static int __init bcm63xx_spi_init(void) -+{ -+ return platform_driver_register(&bcm63xx_spi_driver); -+} -+ -+static void __exit bcm63xx_spi_exit(void) -+{ -+ platform_driver_unregister(&bcm63xx_spi_driver); -+} -+ -+module_init(bcm63xx_spi_init); -+module_exit(bcm63xx_spi_exit); -+ -+MODULE_ALIAS("platform:bcm63xx_spi"); -+MODULE_AUTHOR("Florian Fainelli <florian@openwrt.org>"); -+MODULE_AUTHOR("Tanguy Bouzeloc <tanguy.bouzeloc@efixo.com>"); -+MODULE_DESCRIPTION("Broadcom BCM63xx SPI Controller driver"); -+MODULE_LICENSE("GPL"); -+MODULE_VERSION(DRV_VER); ---- a/drivers/spi/Kconfig -+++ b/drivers/spi/Kconfig -@@ -60,6 +60,12 @@ config SPI_ATMEL - This selects a driver for the Atmel SPI Controller, present on - many AT32 (AVR32) and AT91 (ARM) chips. - -+config SPI_BCM63XX -+ tristate "Broadcom BCM63xx SPI controller" -+ depends on BCM63XX -+ help -+ This is the SPI controller master driver for Broadcom BCM63xx SoC. -+ - config SPI_BFIN - tristate "SPI controller driver for ADI Blackfin5xx" - depends on BLACKFIN ---- a/drivers/spi/Makefile -+++ b/drivers/spi/Makefile -@@ -50,6 +50,7 @@ obj-$(CONFIG_SPI_SH_SCI) += spi_sh_sci. - obj-$(CONFIG_SPI_SH_MSIOF) += spi_sh_msiof.o - obj-$(CONFIG_SPI_STMP3XXX) += spi_stmp.o - obj-$(CONFIG_SPI_NUC900) += spi_nuc900.o -+obj-$(CONFIG_SPI_BCM63XX) += bcm63xx_spi.o - - # special build for s3c24xx spi driver with fiq support - spi_s3c24xx_hw-y := spi_s3c24xx.o ---- /dev/null -+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_spi.h -@@ -0,0 +1,126 @@ -+#ifndef BCM63XX_DEV_SPI_H -+#define BCM63XX_DEV_SPI_H -+ -+#include <linux/types.h> -+#include <bcm63xx_io.h> -+#include <bcm63xx_regs.h> -+ -+int __init bcm63xx_spi_register(void); -+ -+struct bcm63xx_spi_pdata { -+ unsigned int fifo_size; -+ int bus_num; -+ int num_chipselect; -+ u32 speed_hz; -+}; -+ -+enum bcm63xx_regs_spi { -+ SPI_CMD, -+ SPI_INT_STATUS, -+ SPI_INT_MASK_ST, -+ SPI_INT_MASK, -+ SPI_ST, -+ SPI_CLK_CFG, -+ SPI_FILL_BYTE, -+ SPI_MSG_TAIL, -+ SPI_RX_TAIL, -+ SPI_MSG_CTL, -+ SPI_MSG_DATA, -+ SPI_RX_DATA, -+}; -+ -+static inline unsigned long bcm63xx_spireg(enum bcm63xx_regs_spi reg) -+{ -+#ifdef BCMCPU_RUNTIME_DETECT -+ extern const unsigned long *bcm63xx_regs_spi; -+ return bcm63xx_regs_spi[reg]; -+#else -+#ifdef CONFIG_BCM63XX_CPU_6338 -+switch (reg) { -+ case SPI_CMD: -+ return SPI_BCM_6338_SPI_CMD; -+ case SPI_INT_STATUS: -+ return SPI_BCM_6338_SPI_INT_STATUS; -+ case SPI_INT_MASK_ST: -+ return SPI_BCM_6338_SPI_MASK_INT_ST; -+ case SPI_INT_MASK: -+ return SPI_BCM_6338_SPI_INT_MASK; -+ case SPI_ST: -+ return SPI_BCM_6338_SPI_ST; -+ case SPI_CLK_CFG: -+ return SPI_BCM_6338_SPI_CLK_CFG; -+ case SPI_FILL_BYTE: -+ return SPI_BCM_6338_SPI_FILL_BYTE; -+ case SPI_MSG_TAIL: -+ return SPI_BCM_6338_SPI_MSG_TAIL; -+ case SPI_RX_TAIL: -+ return SPI_BCM_6338_SPI_RX_TAIL; -+ case SPI_MSG_CTL: -+ return SPI_BCM_6338_SPI_MSG_CTL; -+ case SPI_MSG_DATA: -+ return SPI_BCM_6338_SPI_MSG_DATA; -+ case SPI_RX_DATA: -+ return SPI_BCM_6338_SPI_RX_DATA; -+} -+#endif -+#ifdef CONFIG_BCM63XX_CPU_6348 -+switch (reg) { -+ case SPI_CMD: -+ return SPI_BCM_6348_SPI_CMD; -+ case SPI_INT_MASK_ST: -+ return SPI_BCM_6348_SPI_MASK_INT_ST; -+ case SPI_INT_MASK: -+ return SPI_BCM_6348_SPI_INT_MASK; -+ case SPI_INT_STATUS: -+ return SPI_BCM_6348_SPI_INT_STATUS; -+ case SPI_ST: -+ return SPI_BCM_6348_SPI_ST; -+ case SPI_CLK_CFG: -+ return SPI_BCM_6348_SPI_CLK_CFG; -+ case SPI_FILL_BYTE: -+ return SPI_BCM_6348_SPI_FILL_BYTE; -+ case SPI_MSG_TAIL: -+ return SPI_BCM_6348_SPI_MSG_TAIL; -+ case SPI_RX_TAIL: -+ return SPI_BCM_6348_SPI_RX_TAIL; -+ case SPI_MSG_CTL: -+ return SPI_BCM_6348_SPI_MSG_CTL; -+ case SPI_MSG_DATA: -+ return SPI_BCM_6348_SPI_MSG_DATA; -+ case SPI_RX_DATA: -+ return SPI_BCM_6348_SPI_RX_DATA; -+} -+#endif -+#ifdef CONFIG_BCM63XX_CPU_6358 -+switch (reg) { -+ case SPI_CMD: -+ return SPI_BCM_6358_SPI_CMD; -+ case SPI_INT_STATUS: -+ return SPI_BCM_6358_SPI_INT_STATUS; -+ case SPI_INT_MASK_ST: -+ return SPI_BCM_6358_SPI_MASK_INT_ST; -+ case SPI_INT_MASK: -+ return SPI_BCM_6358_SPI_INT_MASK; -+ case SPI_ST: -+ return SPI_BCM_6358_SPI_STATUS; -+ case SPI_CLK_CFG: -+ return SPI_BCM_6358_SPI_CLK_CFG; -+ case SPI_FILL_BYTE: -+ return SPI_BCM_6358_SPI_FILL_BYTE; -+ case SPI_MSG_TAIL: -+ return SPI_BCM_6358_SPI_MSG_TAIL; -+ case SPI_RX_TAIL: -+ return SPI_BCM_6358_SPI_RX_TAIL; -+ case SPI_MSG_CTL: -+ return SPI_BCM_6358_MSG_CTL; -+ case SPI_MSG_DATA: -+ return SPI_BCM_6358_SPI_MSG_DATA; -+ case SPI_RX_DATA: -+ return SPI_BCM_6358_SPI_RX_DATA; -+} -+#endif -+#endif -+ return 0; -+} -+ -+#endif /* BCM63XX_DEV_SPI_H */ ---- a/arch/mips/bcm63xx/Makefile -+++ b/arch/mips/bcm63xx/Makefile -@@ -1,6 +1,6 @@ - obj-y += clk.o cpu.o cs.o gpio.o irq.o prom.o setup.o timer.o \ - dev-dsp.o dev-enet.o dev-pcmcia.o dev-uart.o dev-wdt.o \ -- dev-usb-ohci.o dev-usb-ehci.o dev-usb-udc.o -+ dev-usb-ohci.o dev-usb-ehci.o dev-usb-udc.o dev-spi.o - obj-$(CONFIG_EARLY_PRINTK) += early_printk.o - - obj-y += boards/ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -30,6 +30,7 @@ - #include <bcm63xx_dev_usb_ohci.h> - #include <bcm63xx_dev_usb_ehci.h> - #include <bcm63xx_dev_usb_udc.h> -+#include <bcm63xx_dev_spi.h> - #include <board_bcm963xx.h> - - #define PFX "board_bcm963xx: " -@@ -931,6 +932,9 @@ int __init board_register_devices(void) - if (board.num_spis) - spi_register_board_info(board.spis, board.num_spis); - -+ if (!BCMCPU_IS_6345()) -+ bcm63xx_spi_register(); -+ - /* read base address of boot chip select (0) */ - if (BCMCPU_IS_6345()) - val = 0x1fc00000; diff --git a/target/linux/brcm63xx/patches-2.6.37/250-boardid_fixup.patch b/target/linux/brcm63xx/patches-2.6.37/250-boardid_fixup.patch deleted file mode 100644 index 50e8016e3..000000000 --- a/target/linux/brcm63xx/patches-2.6.37/250-boardid_fixup.patch +++ /dev/null @@ -1,58 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -32,9 +32,13 @@ - #include <bcm63xx_dev_usb_udc.h> - #include <bcm63xx_dev_spi.h> - #include <board_bcm963xx.h> -+#include <bcm_tag.h> - - #define PFX "board_bcm963xx: " - -+#define CFE_OFFSET_64K 0x10000 -+#define CFE_OFFSET_128K 0x20000 -+ - static struct bcm963xx_nvram nvram; - static unsigned int mac_addr_used; - static struct board_info board; -@@ -723,6 +727,29 @@ static int board_get_mac_address(u8 *mac - return 0; - } - -+static void __init boardid_fixup(u8 *boot_addr) -+{ -+ struct bcm_tag *tag = (struct bcm_tag *)(boot_addr + CFE_OFFSET_64K); -+ -+ /* check if bcm_tag is at 64k offset */ -+ if (strncmp(nvram.name, tag->boardid, BOARDID_LEN) != 0) { -+ /* else try 128k */ -+ tag = (struct bcm_tag *)(boot_addr + CFE_OFFSET_128K); -+ if (strncmp(nvram.name, tag->boardid, BOARDID_LEN) != 0) { -+ /* No tag found */ -+ printk(KERN_DEBUG "No bcm_tag found!\n"); -+ return; -+ } -+ } -+ /* check if we should override the boardid */ -+ if (tag->information1[0] != '+') -+ return; -+ -+ strncpy(nvram.name, &tag->information1[1], BOARDID_LEN); -+ -+ printk(KERN_INFO "Overriding boardid with '%s'\n", nvram.name); -+} -+ - /* - * early init callback, read nvram data from flash and checksum it - */ -@@ -771,6 +798,11 @@ void __init board_prom_init(void) - return; - } - -+ if (strcmp(cfe_version, "unknown") != 0) { -+ /* cfe present */ -+ boardid_fixup(boot_addr); -+ } -+ - /* find board by name */ - for (i = 0; i < ARRAY_SIZE(bcm963xx_boards); i++) { - if (strncmp(nvram.name, bcm963xx_boards[i]->name, diff --git a/target/linux/brcm63xx/patches-2.6.37/300-alice_gate2_leds.patch b/target/linux/brcm63xx/patches-2.6.37/300-alice_gate2_leds.patch deleted file mode 100644 index f54fab736..000000000 --- a/target/linux/brcm63xx/patches-2.6.37/300-alice_gate2_leds.patch +++ /dev/null @@ -1,113 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -603,6 +603,99 @@ static struct board_info __initdata boar - - .has_ohci0 = 1, - .has_ehci0 = 1, -+ -+ .leds = { -+ /*Each led on alice gate is bi-color */ -+ { -+ .name = "power:red", -+ .gpio = 5, -+ .active_low = 1, -+ }, -+ { -+ .name = "power:green", -+ .gpio = 4, -+ .active_low = 1, -+ .default_trigger = "default-on", -+ }, -+ { -+ .name = "service:red", -+ .gpio = 7, -+ .active_low = 1, -+ }, -+ { -+ .name = "service:green", -+ .gpio = 6, -+ .active_low = 1, -+ }, -+ { -+ .name = "adsl:red", -+ .gpio = 9, -+ .active_low = 1, -+ }, -+ { -+ .name = "adsl:green", -+ .gpio = 10, -+ .active_low = 1, -+ }, -+ { -+ .name = "wifi:red", -+ .gpio = 23, -+ .active_low = 1, -+ }, -+ { -+ .name = "wifi:green", -+ .gpio = 22, -+ .active_low = 1, -+ }, -+ { -+ .name = "internet:red", -+ .gpio = 25, -+ .active_low = 1, -+ }, -+ { -+ .name = "internet:green", -+ .gpio = 24, -+ .active_low = 1, -+ }, -+ { -+ .name = "usr1:red", -+ .gpio = 27, -+ .active_low = 1, -+ }, -+ { -+ .name = "usr1:green", -+ .gpio = 26, -+ .active_low = 1, -+ }, -+ { -+ .name = "usr2:red", -+ .gpio = 30, -+ .active_low = 1, -+ }, -+ { -+ .name = "usr2:green", -+ .gpio = 29, -+ .active_low = 1, -+ }, -+ }, -+ -+ .buttons = { -+ { -+ .desc = "reset", -+ .gpio = 37, -+ .active_low = 1, -+ .type = EV_KEY, -+ .code = KEY_RESTART, -+ .threshold = 3, -+ }, -+ { -+ .desc = "wps", -+ .gpio = 34, -+ .type = EV_KEY, -+ .code = KEY_WPS_BUTTON, -+ .threshold = 3, -+ }, -+ }, - }; - - static struct board_info __initdata board_DWVS0 = { ---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h -+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h -@@ -57,7 +57,7 @@ struct board_info { - struct bcm63xx_dsp_platform_data dsp; - - /* GPIO LEDs */ -- struct gpio_led leds[5]; -+ struct gpio_led leds[14]; - - /* Buttons */ - struct gpio_button buttons[2]; diff --git a/target/linux/brcm63xx/patches-2.6.37/310-96348gw_a_leds.patch b/target/linux/brcm63xx/patches-2.6.37/310-96348gw_a_leds.patch deleted file mode 100644 index 7c5027f87..000000000 --- a/target/linux/brcm63xx/patches-2.6.37/310-96348gw_a_leds.patch +++ /dev/null @@ -1,22 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -475,6 +475,19 @@ static struct board_info __initdata boar - }, - - .has_ohci0 = 1, -+ -+ .leds = { -+ { -+ .name = "adsl", -+ .gpio = 3, -+ .active_low = 1, -+ }, -+ { -+ .name = "usb", -+ .gpio = 0, -+ .active_low = 1, -+ } -+ }, - }; - #endif - diff --git a/target/linux/brcm63xx/patches-2.6.37/440-board-D4PW.patch b/target/linux/brcm63xx/patches-2.6.37/440-board-D4PW.patch deleted file mode 100644 index 07f615993..000000000 --- a/target/linux/brcm63xx/patches-2.6.37/440-board-D4PW.patch +++ /dev/null @@ -1,66 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -489,6 +489,55 @@ static struct board_info __initdata boar - } - }, - }; -+ -+static struct board_info __initdata board_96348_D4PW = { -+ .name = "D-4P-W", -+ .expected_cpu_id = 0x6348, -+ -+ .has_enet1 = 1, -+ .has_pci = 1, -+ .has_uart0 = 1, -+ -+ .enet1 = { -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+ -+ .leds = { -+ { -+ .name = "power:green", -+ .gpio = 0, -+ .active_low = 1, -+ }, -+ { -+ .name = "status", -+ .gpio = 3, -+ .active_low = 1, -+ }, -+ { -+ .name = "internet:green", -+ .gpio = 4, -+ .active_low = 1, -+ }, -+ { -+ .name = "internet:red", -+ .gpio = 5, -+ .active_low = 1, -+ }, -+ }, -+ -+ .buttons = { -+ { -+ .desc = "reset", -+ .gpio = 7, -+ .active_low = 1, -+ .type = EV_KEY, -+ .code = KEY_RESTART, -+ .threshold = 3, -+ }, -+ }, -+}; -+ - #endif - - /* -@@ -753,6 +802,7 @@ static const struct board_info __initdat - &board_DV201AMR, - &board_96348gw_a, - &board_rta1025w_16, -+ &board_96348_D4PW, - #endif - - #ifdef CONFIG_BCM63XX_CPU_6358 diff --git a/target/linux/brcm63xx/patches-2.6.37/441-board-NB4.patch b/target/linux/brcm63xx/patches-2.6.37/441-board-NB4.patch deleted file mode 100644 index 2fb7ff272..000000000 --- a/target/linux/brcm63xx/patches-2.6.37/441-board-NB4.patch +++ /dev/null @@ -1,569 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -17,6 +17,9 @@ - #include <linux/ssb/ssb.h> - #include <linux/gpio_buttons.h> - #include <linux/input.h> -+#include <linux/spi/spi.h> -+#include <linux/spi/spi_gpio.h> -+#include <linux/spi/74x164.h> - #include <asm/addrspace.h> - #include <bcm63xx_board.h> - #include <bcm63xx_cpu.h> -@@ -39,6 +42,12 @@ - #define CFE_OFFSET_64K 0x10000 - #define CFE_OFFSET_128K 0x20000 - -+#define NB4_PID_OFFSET 0xff80 -+#define NB4_74X164_GPIO_BASE 64 -+#define NB4_SPI_GPIO_MOSI 7 -+#define NB4_SPI_GPIO_CLK 6 -+#define NB4_74HC64_GPIO(X) (NB4_74X164_GPIO_BASE + (X)) -+ - static struct bcm963xx_nvram nvram; - static unsigned int mac_addr_used; - static struct board_info board; -@@ -780,6 +789,502 @@ static struct board_info __initdata boar - - .has_ohci0 = 1, - }; -+ -+struct spi_gpio_platform_data nb4_spi_gpio_data = { -+ .sck = NB4_SPI_GPIO_CLK, -+ .mosi = NB4_SPI_GPIO_MOSI, -+ .miso = SPI_GPIO_NO_MISO, -+ .num_chipselect = 1, -+}; -+ -+ -+static struct platform_device nb4_spi_gpio = { -+ .name = "spi_gpio", -+ .id = 1, -+ .dev = { -+ .platform_data = &nb4_spi_gpio_data, -+ }, -+}; -+ -+static struct platform_device * __initdata nb4_devices[] = { -+ &nb4_spi_gpio, -+}; -+ -+const struct gen_74x164_chip_platform_data nb4_74x164_platform_data = { -+ .base = NB4_74X164_GPIO_BASE -+}; -+ -+static struct spi_board_info nb4_spi_devices[] = { -+ { -+ .modalias = "74x164", -+ .max_speed_hz = 781000, -+ .bus_num = 1, -+ .controller_data = (void *) SPI_GPIO_NO_CHIPSELECT, -+ .mode = SPI_MODE_0, -+ .platform_data = &nb4_74x164_platform_data -+ } -+}; -+ -+static struct board_info __initdata board_nb4_ser_r0 = { -+ .name = "NB4-SER-r0", -+ .expected_cpu_id = 0x6358, -+ -+ .has_uart0 = 1, -+ .has_enet0 = 1, -+ .has_enet1 = 1, -+ .has_pci = 1, -+ -+ .enet0 = { -+ .has_phy = 1, -+ .use_internal_phy = 1, -+ }, -+ -+ .enet1 = { -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+ -+ -+ .has_ohci0 = 1, -+ .has_pccard = 1, -+ .has_ehci0 = 1, -+ -+ .has_udc0 = 1, -+ -+ .leds = { -+ { -+ .name = "adsl", -+ .gpio = NB4_74HC64_GPIO(4), -+ .active_low = 1, -+ }, -+ { -+ .name = "traffic", -+ .gpio = 2, -+ .active_low = 1, -+ }, -+ { -+ .name = "tel", -+ .gpio = NB4_74HC64_GPIO(3), -+ .active_low = 1, -+ }, -+ { -+ .name = "tv", -+ .gpio = NB4_74HC64_GPIO(2), -+ .active_low = 1, -+ }, -+ { -+ .name = "wifi", -+ .gpio = 15, -+ .active_low = 1, -+ }, -+ { -+ .name = "alarm", -+ .gpio = NB4_74HC64_GPIO(0), -+ .active_low = 1, -+ }, -+ { -+ .name = "service:red", -+ .gpio = 29, -+ .active_low = 1, -+ }, -+ { -+ .name = "service:green", -+ .gpio = 30, -+ .active_low = 1, -+ }, -+ { -+ .name = "service:blue", -+ .gpio = 4, -+ .active_low = 1, -+ }, -+ }, -+ .buttons = { -+ { -+ .desc = "reset", -+ .gpio = 34, -+ .type = EV_KEY, -+ .code = KEY_RESTART, -+ .threshold = 3, -+ }, -+ { -+ .desc = "wps", -+ .gpio = 37, -+ .type = EV_KEY, -+ .code = KEY_WPS_BUTTON, -+ .threshold = 3, -+ }, -+ }, -+ .devs = nb4_devices, -+ .num_devs = ARRAY_SIZE(nb4_devices), -+ .spis = nb4_spi_devices, -+ .num_spis = ARRAY_SIZE(nb4_spi_devices), -+}; -+ -+static struct board_info __initdata board_nb4_ser_r1 = { -+ .name = "NB4-SER-r1", -+ .expected_cpu_id = 0x6358, -+ -+ .has_uart0 = 1, -+ .has_enet0 = 1, -+ .has_enet1 = 1, -+ .has_pci = 1, -+ -+ .enet0 = { -+ .has_phy = 1, -+ .use_internal_phy = 1, -+ }, -+ -+ .enet1 = { -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+ -+ -+ .has_ohci0 = 1, -+ .has_pccard = 1, -+ .has_ehci0 = 1, -+ -+ .has_udc0 = 1, -+ -+ .leds = { -+ { -+ .name = "adsl", -+ .gpio = NB4_74HC64_GPIO(4), -+ .active_low = 1, -+ }, -+ { -+ .name = "traffic", -+ .gpio = 2, -+ .active_low = 1, -+ }, -+ { -+ .name = "tel", -+ .gpio = NB4_74HC64_GPIO(3), -+ .active_low = 1, -+ }, -+ { -+ .name = "tv", -+ .gpio = NB4_74HC64_GPIO(2), -+ .active_low = 1, -+ }, -+ { -+ .name = "wifi", -+ .gpio = 15, -+ .active_low = 1, -+ }, -+ { -+ .name = "alarm", -+ .gpio = NB4_74HC64_GPIO(0), -+ .active_low = 1, -+ }, -+ { -+ .name = "service:red", -+ .gpio = 29, -+ .active_low = 1, -+ }, -+ { -+ .name = "service:green", -+ .gpio = 30, -+ .active_low = 1, -+ }, -+ { -+ .name = "service:blue", -+ .gpio = 4, -+ .active_low = 1, -+ }, -+ }, -+ .buttons = { -+ { -+ .desc = "reset", -+ .gpio = 34, -+ .type = EV_KEY, -+ .code = KEY_RESTART, -+ .threshold = 3, -+ }, -+ { -+ .desc = "wps", -+ .gpio = 37, -+ .type = EV_KEY, -+ .code = KEY_WPS_BUTTON, -+ .threshold = 3, -+ }, -+ }, -+ .devs = nb4_devices, -+ .num_devs = ARRAY_SIZE(nb4_devices), -+ .spis = nb4_spi_devices, -+ .num_spis = ARRAY_SIZE(nb4_spi_devices), -+}; -+ -+static struct board_info __initdata board_nb4_ser_r2 = { -+ .name = "NB4-SER-r2", -+ .expected_cpu_id = 0x6358, -+ -+ .has_uart0 = 1, -+ .has_enet0 = 1, -+ .has_enet1 = 1, -+ .has_pci = 1, -+ -+ .enet0 = { -+ .has_phy = 1, -+ .use_internal_phy = 1, -+ }, -+ -+ .enet1 = { -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+ -+ -+ .has_ohci0 = 1, -+ .has_pccard = 1, -+ .has_ehci0 = 1, -+ -+ .leds = { -+ { -+ .name = "adsl", -+ .gpio = NB4_74HC64_GPIO(4), -+ .active_low = 1, -+ }, -+ { -+ .name = "traffic", -+ .gpio = 2, -+ .active_low = 1, -+ }, -+ { -+ .name = "tel", -+ .gpio = NB4_74HC64_GPIO(3), -+ .active_low = 1, -+ }, -+ { -+ .name = "tv", -+ .gpio = NB4_74HC64_GPIO(2), -+ .active_low = 1, -+ }, -+ { -+ .name = "wifi", -+ .gpio = 15, -+ .active_low = 1, -+ }, -+ { -+ .name = "alarm", -+ .gpio = NB4_74HC64_GPIO(0), -+ .active_low = 1, -+ }, -+ { -+ .name = "service:red", -+ .gpio = 29, -+ .active_low = 1, -+ }, -+ { -+ .name = "service:green", -+ .gpio = 30, -+ .active_low = 1, -+ }, -+ { -+ .name = "service:blue", -+ .gpio = 4, -+ .active_low = 1, -+ }, -+ }, -+ .buttons = { -+ { -+ .desc = "reset", -+ .gpio = 34, -+ .type = EV_KEY, -+ .code = KEY_RESTART, -+ .threshold = 3, -+ }, -+ { -+ .desc = "wps", -+ .gpio = 37, -+ .type = EV_KEY, -+ .code = KEY_WPS_BUTTON, -+ .threshold = 3, -+ }, -+ }, -+ .devs = nb4_devices, -+ .num_devs = ARRAY_SIZE(nb4_devices), -+ .spis = nb4_spi_devices, -+ .num_spis = ARRAY_SIZE(nb4_spi_devices), -+}; -+ -+static struct board_info __initdata board_nb4_fxc_r1 = { -+ .name = "NB4-FXC-r1", -+ .expected_cpu_id = 0x6358, -+ -+ .has_uart0 = 1, -+ .has_enet0 = 1, -+ .has_enet1 = 1, -+ .has_pci = 1, -+ -+ .enet0 = { -+ .has_phy = 1, -+ .use_internal_phy = 1, -+ }, -+ -+ .enet1 = { -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+ -+ -+ .has_ohci0 = 1, -+ .has_pccard = 1, -+ .has_ehci0 = 1, -+ -+ .has_udc0 = 1, -+ -+ .leds = { -+ { -+ .name = "adsl", -+ .gpio = NB4_74HC64_GPIO(4), -+ .active_low = 1, -+ }, -+ { -+ .name = "traffic", -+ .gpio = 2, -+ }, -+ { -+ .name = "tel", -+ .gpio = NB4_74HC64_GPIO(3), -+ .active_low = 1, -+ }, -+ { -+ .name = "tv", -+ .gpio = NB4_74HC64_GPIO(2), -+ .active_low = 1, -+ }, -+ { -+ .name = "wifi", -+ .gpio = 15, -+ }, -+ { -+ .name = "alarm", -+ .gpio = NB4_74HC64_GPIO(0), -+ .active_low = 1, -+ }, -+ { -+ .name = "service:red", -+ .gpio = 29, -+ }, -+ { -+ .name = "service:green", -+ .gpio = 30, -+ }, -+ { -+ .name = "service:blue", -+ .gpio = 4, -+ }, -+ }, -+ .buttons = { -+ { -+ .desc = "reset", -+ .gpio = 34, -+ .type = EV_KEY, -+ .code = KEY_RESTART, -+ .threshold = 3, -+ }, -+ { -+ .desc = "wps", -+ .gpio = 37, -+ .type = EV_KEY, -+ .code = KEY_WPS_BUTTON, -+ .threshold = 3, -+ }, -+ }, -+ .devs = nb4_devices, -+ .num_devs = ARRAY_SIZE(nb4_devices), -+ .spis = nb4_spi_devices, -+ .num_spis = ARRAY_SIZE(nb4_spi_devices), -+}; -+ -+static struct board_info __initdata board_nb4_fxc_r2 = { -+ .name = "NB4-FXC-r2", -+ .expected_cpu_id = 0x6358, -+ -+ .has_uart0 = 1, -+ .has_enet0 = 1, -+ .has_enet1 = 1, -+ .has_pci = 1, -+ -+ .enet0 = { -+ .has_phy = 1, -+ .use_internal_phy = 1, -+ }, -+ -+ .enet1 = { -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+ -+ -+ .has_ohci0 = 1, -+ .has_pccard = 1, -+ .has_ehci0 = 1, -+ -+ .leds = { -+ { -+ .name = "adsl", -+ .gpio = NB4_74HC64_GPIO(4), -+ .active_low = 1, -+ }, -+ { -+ .name = "traffic", -+ .gpio = 2, -+ }, -+ { -+ .name = "tel", -+ .gpio = NB4_74HC64_GPIO(3), -+ .active_low = 1, -+ }, -+ { -+ .name = "tv", -+ .gpio = NB4_74HC64_GPIO(2), -+ .active_low = 1, -+ }, -+ { -+ .name = "wifi", -+ .gpio = 15, -+ }, -+ { -+ .name = "alarm", -+ .gpio = NB4_74HC64_GPIO(0), -+ .active_low = 1, -+ }, -+ { -+ .name = "service:red", -+ .gpio = 29, -+ }, -+ { -+ .name = "service:green", -+ .gpio = 30, -+ }, -+ { -+ .name = "service:blue", -+ .gpio = 4, -+ }, -+ }, -+ .buttons = { -+ { -+ .desc = "reset", -+ .gpio = 34, -+ .type = EV_KEY, -+ .code = KEY_RESTART, -+ .threshold = 3, -+ }, -+ { -+ .desc = "wps", -+ .gpio = 37, -+ .type = EV_KEY, -+ .code = KEY_WPS_BUTTON, -+ .threshold = 3, -+ }, -+ }, -+ .devs = nb4_devices, -+ .num_devs = ARRAY_SIZE(nb4_devices), -+ .spis = nb4_spi_devices, -+ .num_spis = ARRAY_SIZE(nb4_spi_devices), -+}; - #endif - - /* -@@ -810,9 +1315,30 @@ static const struct board_info __initdat - &board_96358vw2, - &board_AGPFS0, - &board_DWVS0, -+ &board_nb4_ser_r0, -+ &board_nb4_ser_r1, -+ &board_nb4_ser_r2, -+ &board_nb4_fxc_r1, -+ &board_nb4_fxc_r2, - #endif - }; - -+static void __init nb4_nvram_fixup(void) -+{ -+ u8 *boot_addr, *p; -+ u32 val; -+ -+ if (BCMCPU_IS_6358() && (!strcmp(nvram.name, "96358VW"))) { -+ val = bcm_mpi_readl(MPI_CSBASE_REG(0)); -+ val &= MPI_CSBASE_BASE_MASK; -+ boot_addr = (u8 *)KSEG1ADDR(val); -+ /* Extract nb4 PID */ -+ p = boot_addr + NB4_PID_OFFSET; -+ if (!memcmp(p, "NB4-", 4)) -+ memcpy(nvram.name, p, sizeof("NB4-XXX-rX")); -+ } -+} -+ - /* - * Register a sane SPROMv2 to make the on-board - * bcm4318 WLAN work -@@ -959,6 +1485,9 @@ void __init board_prom_init(void) - boardid_fixup(boot_addr); - } - -+ /* Fixup broken nb4 board name */ -+ nb4_nvram_fixup(); -+ - /* find board by name */ - for (i = 0; i < ARRAY_SIZE(bcm963xx_boards); i++) { - if (strncmp(nvram.name, bcm963xx_boards[i]->name, diff --git a/target/linux/brcm63xx/patches-2.6.37/442-board-96338W2_E7T.patch b/target/linux/brcm63xx/patches-2.6.37/442-board-96338W2_E7T.patch deleted file mode 100644 index 66ced55fa..000000000 --- a/target/linux/brcm63xx/patches-2.6.37/442-board-96338W2_E7T.patch +++ /dev/null @@ -1,49 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -146,6 +146,38 @@ static struct board_info __initdata boar - }, - }, - }; -+ -+static struct board_info __initdata board_96338w2_e7t = { -+ .name = "96338W2_E7T", -+ .expected_cpu_id = 0x6338, -+ -+ .has_enet0 = 1, -+ -+ .enet0 = { -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+ -+ .leds = { -+ { -+ .name = "ppp", -+ .gpio = 4, -+ .active_low = 1, -+ }, -+ { -+ .name = "ppp-fail", -+ .gpio = 5, -+ .active_low = 1, -+ }, -+ { -+ .name = "power", -+ .gpio = 0, -+ .active_low = 1, -+ .default_trigger = "default-on", -+ -+ }, -+ }, -+}; - #endif - - /* -@@ -1294,6 +1326,7 @@ static const struct board_info __initdat - #ifdef CONFIG_BCM63XX_CPU_6338 - &board_96338gw, - &board_96338w, -+ &board_96338w2_e7t, - #endif - #ifdef CONFIG_BCM63XX_CPU_6345 - &board_96345gw2, diff --git a/target/linux/brcm63xx/patches-2.6.37/443-board-CPVA642.patch b/target/linux/brcm63xx/patches-2.6.37/443-board-CPVA642.patch deleted file mode 100644 index 0ace02d7b..000000000 --- a/target/linux/brcm63xx/patches-2.6.37/443-board-CPVA642.patch +++ /dev/null @@ -1,109 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -685,6 +685,98 @@ static struct board_info __initdata boar - }, - }; - -+static struct board_info __initdata board_CPVA642 = { -+ .name = "CPVA642", -+ .expected_cpu_id = 0x6358, -+ -+ .has_uart0 = 1, -+ .has_enet1 = 1, -+ .has_pci = 1, -+ -+ .enet1 = { -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+ -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ -+ .leds = { -+ /* bi-color */ -+ { -+ .name = "power:red", -+ .gpio = 14, -+ .active_low = 1, -+ }, -+ { -+ .name = "power:green", -+ .gpio = 11, -+ .active_low = 1, -+ .default_trigger = "default-on", -+ }, -+ { -+ .name = "wifi:red", -+ .gpio = 6, -+ .active_low = 1, -+ }, -+ { -+ .name = "wifi:green", -+ .gpio = 28, -+ .active_low = 0, -+ }, -+ { -+ .name = "link:red", -+ .gpio = 9, -+ .active_low = 1, -+ }, -+ { -+ .name = "link:green", -+ .gpio = 10, -+ .active_low = 1, -+ }, -+ /* green only */ -+ { -+ .name = "ether", -+ .gpio = 1, -+ .active_low = 1, -+ }, -+ { -+ .name = "phone1", -+ .gpio = 4, -+ .active_low = 1, -+ }, -+ { -+ .name = "phone2", -+ .gpio = 2, -+ .active_low = 1, -+ }, -+ { -+ .name = "usb", -+ .gpio = 3, -+ .active_low = 1, -+ }, -+ }, -+ -+ .buttons = { -+ { -+ .desc = "reset", -+ .gpio = 36, -+ .active_low = 1, -+ .type = EV_KEY, -+ .code = KEY_RESTART, -+ .threshold = 3, -+ }, -+ { -+ .desc = "wps", -+ .gpio = 37, -+ .type = EV_KEY, -+ .code = KEY_WPS_BUTTON, -+ .threshold = 3, -+ }, -+ }, -+}; -+ -+ - static struct board_info __initdata board_AGPFS0 = { - .name = "AGPF-S0", - .expected_cpu_id = 0x6358, -@@ -1347,6 +1439,7 @@ static const struct board_info __initdat - &board_96358vw, - &board_96358vw2, - &board_AGPFS0, -+ &board_CPVA642, - &board_DWVS0, - &board_nb4_ser_r0, - &board_nb4_ser_r1, diff --git a/target/linux/brcm63xx/patches-2.6.37/444-board_dsl_274xb_rev_c.patch b/target/linux/brcm63xx/patches-2.6.37/444-board_dsl_274xb_rev_c.patch deleted file mode 100644 index 5bafc77d3..000000000 --- a/target/linux/brcm63xx/patches-2.6.37/444-board_dsl_274xb_rev_c.patch +++ /dev/null @@ -1,70 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -914,6 +914,59 @@ static struct board_info __initdata boar - .has_ohci0 = 1, - }; - -+/* D-Link DSL-274xB revison C2/C3 */ -+static struct board_info __initdata board_dsl_274xb_rev_c = { -+ .name = "AW4139", -+ .expected_cpu_id = 0x6358, -+ -+ .has_uart0 = 1, -+ .has_enet1 = 1, -+ .has_pci = 1, -+ -+ .enet1 = { -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+ -+ .leds = { -+ { -+ .name = "dsl-274xb:green:power", -+ .gpio = 5, -+ .active_low = 1, -+ .default_trigger = "default-on", -+ }, -+ { -+ .name = "dsl-274xb:red:power", -+ .gpio = 4, -+ .active_low = 1, -+ }, -+ { -+ .name = "dsl-274xb:green:adsl", -+ .gpio = 9, -+ .active_low = 1, -+ }, -+ { -+ .name = "dsl-274xb:green:internet", -+ .gpio = 2, -+ }, -+ { -+ .name = "dsl-274xb:red:internet", -+ .gpio = 10, -+ }, -+ }, -+ -+ .buttons = { -+ { -+ .desc = "reset", -+ .gpio = 34, -+ .active_low = 1, -+ .type = EV_KEY, -+ .code = KEY_RESTART, -+ .threshold = 3, -+ }, -+ }, -+}; -+ - struct spi_gpio_platform_data nb4_spi_gpio_data = { - .sck = NB4_SPI_GPIO_CLK, - .mosi = NB4_SPI_GPIO_MOSI, -@@ -1441,6 +1494,7 @@ static const struct board_info __initdat - &board_AGPFS0, - &board_CPVA642, - &board_DWVS0, -+ &board_dsl_274xb_rev_c, - &board_nb4_ser_r0, - &board_nb4_ser_r1, - &board_nb4_ser_r2, diff --git a/target/linux/brcm63xx/patches-2.6.37/445-board_spw500v.patch b/target/linux/brcm63xx/patches-2.6.37/445-board_spw500v.patch deleted file mode 100644 index e2215f2d0..000000000 --- a/target/linux/brcm63xx/patches-2.6.37/445-board_spw500v.patch +++ /dev/null @@ -1,78 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -579,6 +579,67 @@ static struct board_info __initdata boar - }, - }; - -+static struct board_info __initdata board_spw500v = { -+ .name = "SPW500V", -+ .expected_cpu_id = 0x6348, -+ -+ .has_uart0 = 1, -+ .has_enet0 = 1, -+ .has_pci = 1, -+ -+ .enet0 = { -+ .has_phy = 1, -+ .use_internal_phy = 1, -+ }, -+ -+ .has_dsp = 1, -+ .dsp = { -+ .gpio_rst = 6, -+ .gpio_int = 34, -+ .ext_irq = 2, -+ .cs = 2, -+ }, -+ -+ .leds = { -+ { -+ .name = "power:red", -+ .gpio = 1, -+ .active_low = 1, -+ }, -+ { -+ .name = "power:green", -+ .gpio = 0, -+ .active_low = 1, -+ .default_trigger = "default-on", -+ }, -+ { -+ .name = "ppp", -+ .gpio = 3, -+ .active_low = 1, -+ }, -+ { .name = "pstn", -+ .gpio = 28, -+ .active_low = 1, -+ }, -+ { -+ .name = "voip", -+ .gpio = 32, -+ .active_low = 1, -+ }, -+ }, -+ -+ .buttons = { -+ { -+ .desc = "reset", -+ .gpio = 33, -+ .active_low = 1, -+ .type = EV_KEY, -+ .code = KEY_RESTART, -+ .threshold = 3, -+ }, -+ }, -+}; -+ - #endif - - /* -@@ -1486,6 +1547,7 @@ static const struct board_info __initdat - &board_96348gw_a, - &board_rta1025w_16, - &board_96348_D4PW, -+ &board_spw500v, - #endif - - #ifdef CONFIG_BCM63XX_CPU_6358 diff --git a/target/linux/brcm63xx/patches-2.6.37/447-board_gw6200_gw6000.patch b/target/linux/brcm63xx/patches-2.6.37/447-board_gw6200_gw6000.patch deleted file mode 100644 index c06fda942..000000000 --- a/target/linux/brcm63xx/patches-2.6.37/447-board_gw6200_gw6000.patch +++ /dev/null @@ -1,129 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -432,6 +432,117 @@ static struct board_info __initdata boar - }, - }; - -+static struct board_info __initdata board_gw6200 = { -+ .name = "GW6200", -+ .expected_cpu_id = 0x6348, -+ -+ .has_uart0 = 1, -+ .has_enet0 = 1, -+ .has_enet1 = 1, -+ .has_pci = 1, -+ -+ .enet0 = { -+ .has_phy = 1, -+ .use_internal_phy = 1, -+ }, -+ .enet1 = { -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+ -+ .has_ohci0 = 1, -+ -+ .has_dsp = 1, -+ .dsp = { -+ .gpio_rst = 8, /* FIXME: What is real GPIO here? */ -+ .gpio_int = 34, -+ .ext_irq = 2, -+ .cs = 2, -+ }, -+ -+ .leds = { -+ { -+ .name = "line1", -+ .gpio = 4, -+ .active_low = 1, -+ }, -+ { -+ .name = "line2", -+ .gpio = 5, -+ .active_low = 1, -+ }, -+ { -+ .name = "line3", -+ .gpio = 6, -+ .active_low = 1, -+ }, -+ { -+ .name = "tel", -+ .gpio = 7, -+ .active_low = 1, -+ }, -+ { -+ .name = "ethernet", -+ .gpio = 35, -+ .active_low = 1, -+ }, -+ }, -+ .buttons = { -+ { -+ .desc = "reset", -+ .gpio = 36, -+ .active_low = 1, -+ .type = EV_KEY, -+ .code = KEY_RESTART, -+ .threshold = 3, -+ }, -+ }, -+}; -+ -+static struct board_info __initdata board_gw6000 = { -+ .name = "GW6000", -+ .expected_cpu_id = 0x6348, -+ -+ .has_uart0 = 1, -+ .has_enet0 = 1, -+ .has_enet1 = 1, -+ .has_pci = 1, -+ -+ .enet0 = { -+ .has_phy = 1, -+ .use_internal_phy = 1, -+ }, -+ .enet1 = { -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+ -+ .has_ohci0 = 1, -+ -+ .has_dsp = 1, -+ .dsp = { -+ .gpio_rst = 6, -+ .gpio_int = 34, -+ .ext_irq = 2, -+ .cs = 2, -+ }, -+ -+ /* GW6000 has no GPIO-controlled leds */ -+ -+ .buttons = { -+ { -+ .desc = "reset", -+ .gpio = 36, -+ .active_low = 1, -+ .type = EV_KEY, -+ .code = KEY_RESTART, -+ .threshold = 3, -+ }, -+ }, -+}; -+ -+ -+ - static struct board_info __initdata board_FAST2404 = { - .name = "F@ST2404", - .expected_cpu_id = 0x6348, -@@ -1540,6 +1651,8 @@ static const struct board_info __initdat - #ifdef CONFIG_BCM63XX_CPU_6348 - &board_96348r, - &board_96348gw, -+ &board_gw6000, -+ &board_gw6200, - &board_96348gw_10, - &board_96348gw_11, - &board_FAST2404, diff --git a/target/linux/brcm63xx/patches-2.6.37/448-board-MAGIC.patch b/target/linux/brcm63xx/patches-2.6.37/448-board-MAGIC.patch deleted file mode 100644 index 47e7db141..000000000 --- a/target/linux/brcm63xx/patches-2.6.37/448-board-MAGIC.patch +++ /dev/null @@ -1,87 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -751,6 +751,76 @@ static struct board_info __initdata boar - }, - }; - -+static struct board_info __initdata board_96348sv = { -+ .name = "MAGIC", -+ .expected_cpu_id = 0x6348, -+ -+ .has_uart0 = 1, -+ .has_enet0 = 1, -+ .has_enet1 = 1, -+ .has_pci = 1, -+ -+ .enet0 = { -+ .has_phy = 1, -+ .use_internal_phy = 1, -+ }, -+ .enet1 = { -+ /* is has BP_ENET_EXTERNAL_PHY */ -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+ -+ .has_ohci0 = 1, -+ .has_pccard = 1, -+ .has_ehci0 = 1, -+ -+ .has_dsp = 1, -+ .dsp = { -+ .gpio_rst = 25, -+ .gpio_int = 34, -+ .cs = 2, -+ .ext_irq = 2, -+ }, -+ -+ .leds = { -+ { -+ .name = "voip", -+ .gpio = 22, -+ .active_low = 1, -+ }, -+ { -+ .name = "adsl", -+ .gpio = 5, -+ .active_low = 1, -+ }, -+ { -+ .name = "wifi", -+ .gpio = 28, -+ }, -+ { -+ .name = "usb", -+ .gpio = 35, -+ .active_low = 1, -+ }, -+ { -+ .name = "hpna", -+ .gpio = 4, -+ .active_low = 1, -+ }, -+ { -+ .name = "power", -+ .gpio = 0, -+ .active_low = 1, -+ .default_trigger = "default-on", -+ }, -+ { -+ .name = "stop", -+ .gpio = 1, -+ .active_low = 1, -+ }, -+ }, -+}; -+ - #endif - - /* -@@ -1661,6 +1731,7 @@ static const struct board_info __initdat - &board_rta1025w_16, - &board_96348_D4PW, - &board_spw500v, -+ &board_96348sv, - #endif - - #ifdef CONFIG_BCM63XX_CPU_6358 diff --git a/target/linux/brcm63xx/patches-2.6.37/449-board_hw553.patch b/target/linux/brcm63xx/patches-2.6.37/449-board_hw553.patch deleted file mode 100644 index f806ad078..000000000 --- a/target/linux/brcm63xx/patches-2.6.37/449-board_hw553.patch +++ /dev/null @@ -1,90 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -1706,6 +1706,79 @@ static struct board_info __initdata boar - }; - #endif - -+static struct board_info __initdata board_HW553 = { -+ .name = "HW553", -+ .expected_cpu_id = 0x6358, -+ -+ .has_enet0 = 1, -+ .has_enet1 = 1, -+ .has_pci = 1, -+ -+ .enet0 = { -+ .has_phy = 1, -+ .use_internal_phy = 1, -+ }, -+ -+ .enet1 = { -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+ -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ -+ .leds = { -+ /*Each led on HW553 is bi-color (except wifi) */ -+ { -+ .name = "lan:red", -+ .gpio = 34, -+ .active_low = 1, -+ }, -+ { -+ .name = "lan:blue", -+ .gpio = 35, -+ .active_low = 1, -+ }, -+ { -+ .name = "adsl:red", -+ .gpio = 22, -+ .active_low = 1, -+ }, -+ { -+ .name = "adsl:blue", -+ .gpio = 23, -+ .active_low = 1, -+ }, -+ { -+ .name = "power:red", -+ .gpio = 5, -+ .active_low = 1, -+ .default_trigger = "default-on", -+ }, -+ -+ { -+ .name = "power:blue", -+ .gpio = 4, -+ .active_low = 1, -+ }, -+ { -+ .name = "wifi:red", -+ .gpio = 25, -+ .active_low = 1, -+ }, -+ { -+ .name = "internetkey:red", -+ .gpio = 12, -+ .active_low = 1, -+ }, -+ { -+ .name = "internetkey:blue", -+ .gpio = 13, -+ .active_low = 1, -+ }, -+ }, -+}; -+ - /* - * all boards - */ -@@ -1746,6 +1819,7 @@ static const struct board_info __initdat - &board_nb4_ser_r2, - &board_nb4_fxc_r1, - &board_nb4_fxc_r2, -+ &board_HW553, - #endif - }; - diff --git a/target/linux/brcm63xx/patches-2.6.37/450-board_rta1320_16m.patch b/target/linux/brcm63xx/patches-2.6.37/450-board_rta1320_16m.patch deleted file mode 100644 index 537a88bae..000000000 --- a/target/linux/brcm63xx/patches-2.6.37/450-board_rta1320_16m.patch +++ /dev/null @@ -1,54 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -178,6 +178,43 @@ static struct board_info __initdata boar - }, - }, - }; -+ -+static struct board_info __initdata board_rta1320_16m = { -+ .name = "RTA1320_16M", -+ .expected_cpu_id = 0x6338, -+ -+ .has_uart0 = 1, -+ .has_enet0 = 1, -+ -+ .enet0 = { -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+ -+ .leds = { -+ { -+ .name = "adsl", -+ .gpio = 3, -+ .active_low = 1, -+ }, -+ { -+ .name = "ppp", -+ .gpio = 4, -+ .active_low = 1, -+ }, -+ { -+ .name = "power", -+ .gpio = 0, -+ .active_low = 1, -+ .default_trigger = "default-on", -+ }, -+ { -+ .name = "stop", -+ .gpio = 1, -+ .active_low = 1, -+ }, -+ }, -+}; - #endif - - /* -@@ -1787,6 +1824,7 @@ static const struct board_info __initdat - &board_96338gw, - &board_96338w, - &board_96338w2_e7t, -+ &board_rta1320_16m, - #endif - #ifdef CONFIG_BCM63XX_CPU_6345 - &board_96345gw2, diff --git a/target/linux/brcm63xx/patches-2.6.37/451-board_spw303v.patch b/target/linux/brcm63xx/patches-2.6.37/451-board_spw303v.patch deleted file mode 100644 index 25b7140fb..000000000 --- a/target/linux/brcm63xx/patches-2.6.37/451-board_spw303v.patch +++ /dev/null @@ -1,83 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -1741,6 +1741,72 @@ static struct board_info __initdata boar - .spis = nb4_spi_devices, - .num_spis = ARRAY_SIZE(nb4_spi_devices), - }; -+ -+ /* T-Home Speedport W 303V Typ B */ -+static struct board_info __initdata board_spw303v = { -+ .name = "96358-502V", -+ .expected_cpu_id = 0x6358, -+ -+ .has_uart0 = 1, -+ .has_enet0 = 1, -+ .has_pci = 1, -+ -+ .enet0 = { -+ .has_phy = 1, -+ .use_internal_phy = 1, -+ }, -+ -+ .leds = { -+ { -+ .name = "spw303v:green:power+adsl", -+ .gpio = 22, -+ .active_low = 1, -+ }, -+ { -+ .name = "spw303v:red:power+adsl", -+ .gpio = 2, -+ .active_low = 1, -+ }, -+ { -+ .name = "spw303v:green:ppp", -+ .gpio = 5, -+ .active_low = 1, -+ }, -+ { -+ .name = "spw303v:green:ses", -+ .gpio = 0, -+ .active_low = 1, -+ }, -+ { -+ .name = "spw303v:green:voip", -+ .gpio = 27, -+ .active_low = 1, -+ }, -+ { -+ .name = "spw303v:green:pots", -+ .gpio = 31, -+ .active_low = 1, -+ }, -+ }, -+ -+ .buttons = { -+ { -+ .desc = "reset", -+ .gpio = 11, -+ .type = EV_KEY, -+ .code = KEY_RESTART, -+ .threshold = 3, -+ }, -+ { -+ .desc = "ses", -+ .gpio = 37, -+ .active_low = 1, -+ .type = EV_KEY, -+ .code = KEY_WPS_BUTTON, -+ .threshold = 3, -+ }, -+ } -+}; - #endif - - static struct board_info __initdata board_HW553 = { -@@ -1858,6 +1924,7 @@ static const struct board_info __initdat - &board_nb4_fxc_r1, - &board_nb4_fxc_r2, - &board_HW553, -+ &board_spw303v, - #endif - }; - diff --git a/target/linux/brcm63xx/patches-2.6.37/452-board_V2500V.patch b/target/linux/brcm63xx/patches-2.6.37/452-board_V2500V.patch deleted file mode 100644 index 4b483d4ec..000000000 --- a/target/linux/brcm63xx/patches-2.6.37/452-board_V2500V.patch +++ /dev/null @@ -1,112 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -858,6 +858,63 @@ static struct board_info __initdata boar - }, - }; - -+ static struct board_info __initdata board_V2500V_BB = { -+ .name = "V2500V_BB", -+ .expected_cpu_id = 0x6348, -+ -+ .has_uart0 = 1, -+ .has_enet0 = 1, -+ .has_enet1 = 1, -+ .has_pci = 1, -+ -+ .enet0 = { -+ .has_phy = 1, -+ .use_internal_phy = 1, -+ }, -+ .enet1 = { -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+ -+ .leds = { -+ { -+ .name = "power:green", -+ .gpio = 0, -+ .active_low = 1, -+ .default_trigger = "default-on", -+ }, -+ { -+ .name = "power:red", -+ .gpio = 1, -+ .active_low = 1, -+ }, -+ { -+ .name = "adsl", -+ .gpio = 2, -+ .active_low = 1, -+ }, -+ { .name = "ppp", -+ .gpio = 3, -+ .active_low = 1, -+ }, -+ { -+ .name = "wireless", -+ .gpio = 6, -+ .active_low = 1, -+ }, -+ }, -+ .buttons = { -+ { -+ .desc = "reset", -+ .gpio = 31, -+ .active_low = 1, -+ .type = EV_KEY, -+ .code = KEY_RESTART, -+ .threshold = 3, -+ }, -+ }, -+}; -+ - #endif - - /* -@@ -1909,6 +1966,7 @@ static const struct board_info __initdat - &board_96348_D4PW, - &board_spw500v, - &board_96348sv, -+ &board_V2500V_BB, - #endif - - #ifdef CONFIG_BCM63XX_CPU_6358 -@@ -2057,6 +2115,22 @@ void __init board_prom_init(void) - val &= MPI_CSBASE_BASE_MASK; - } - boot_addr = (u8 *)KSEG1ADDR(val); -+ printk(KERN_INFO PFX "Boot address 0x%08x\n",(unsigned int)boot_addr); -+ -+ /* BT Voyager 2500V (RTA1046VW PCB) has 8 Meg flash used as two */ -+ /* banks of 4 Meg. The byte at 0xBF800000 identifies the back to use.*/ -+ /* Loading firmware from the CFE Prompt always loads to Bank 0 */ -+ /* Do an early check of CFE and then select bank 0 */ -+ -+ if (boot_addr == (u8 *)0xbf800000) { -+ u8 *tmp_boot_addr; -+ tmp_boot_addr = (u8 *)0xbfc00000; // Address of Bank 0 -+ memcpy(&nvram, tmp_boot_addr + BCM963XX_NVRAM_OFFSET, sizeof(nvram)); -+ if (!strcmp(nvram.name, "V2500V_BB")) { -+ printk(KERN_INFO PFX "V2500V: nvram bank 0\n"); -+ boot_addr = (u8 *)0xbfc00000; // Bank 0 -+ } -+ } - - /* dump cfe version */ - cfe = boot_addr + BCM963XX_CFE_VERSION_OFFSET; -@@ -2264,6 +2338,14 @@ int __init board_register_devices(void) - val = bcm_mpi_readl(MPI_CSBASE_REG(0)); - val &= MPI_CSBASE_BASE_MASK; - } -+ -+ /* BT Voyager 2500V has 8 Meg flash in two 4 Meg banks */ -+ /* Loading from CFE always uses Bank 0 */ -+ if (!strcmp(board.name, "V2500V_BB")) { -+ printk(KERN_INFO PFX "V2500V: Start in Bank 0\n"); -+ val = val + 0x400000; // Select Bank 0 start address -+ } -+ - mtd_resources[0].start = val; - mtd_resources[0].end = 0x1FFFFFFF; - diff --git a/target/linux/brcm63xx/patches-2.6.37/453-board_BTV2110.patch b/target/linux/brcm63xx/patches-2.6.37/453-board_BTV2110.patch deleted file mode 100644 index 9e280b49f..000000000 --- a/target/linux/brcm63xx/patches-2.6.37/453-board_BTV2110.patch +++ /dev/null @@ -1,73 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -401,6 +401,62 @@ static struct board_info __initdata boar - }, - }; - -+ -+/* BT Voyager 2110 */ -+static struct board_info __initdata board_V2110 = { -+ .name = "V2110", -+ .expected_cpu_id = 0x6348, -+ -+ .has_uart0 = 1, -+ .has_enet1 = 1, -+ .has_pci = 1, -+ -+ .enet1 = { -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+ -+ .leds = { -+ { -+ .name = "V2110:green:power", -+ .gpio = 0, -+ .active_low = 1, -+ .default_trigger = "default-on", -+ }, -+ { -+ .name = "V2110:red:power", -+ .gpio = 1, -+ .active_low = 1, -+ }, -+ { -+ .name = "V2110:green:adsl", -+ .gpio = 2, -+ .active_low = 1, -+ }, -+ { .name = "V2110:green:ppp", -+ .gpio = 3, -+ .active_low = 1, -+ }, -+ { -+ .name = "V2110:green:wireless", -+ .gpio = 6, -+ .active_low = 1, -+ }, -+ }, -+ -+ .buttons = { -+ { -+ .desc = "reset", -+ .gpio = 33, -+ .active_low = 1, -+ .type = EV_KEY, -+ .code = KEY_RESTART, -+ .threshold = 3, -+ }, -+ }, -+}; -+ -+ - static struct board_info __initdata board_96348gw = { - .name = "96348GW", - .expected_cpu_id = 0x6348, -@@ -1967,6 +2023,7 @@ static const struct board_info __initdat - &board_spw500v, - &board_96348sv, - &board_V2500V_BB, -+ &board_V2110, - #endif - - #ifdef CONFIG_BCM63XX_CPU_6358 diff --git a/target/linux/brcm63xx/patches-2.6.37/454-board_livebox.patch b/target/linux/brcm63xx/patches-2.6.37/454-board_livebox.patch deleted file mode 100644 index 6c390456c..000000000 --- a/target/linux/brcm63xx/patches-2.6.37/454-board_livebox.patch +++ /dev/null @@ -1,251 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/Kconfig -+++ b/arch/mips/bcm63xx/boards/Kconfig -@@ -8,4 +8,10 @@ config BOARD_BCM963XX - select SSB - help - -+config BOARD_LIVEBOX -+ bool "Inventel Livebox(es) boards" -+ select SSB -+ help -+ Inventel Livebox boards using the RedBoot bootloader. -+ - endchoice ---- a/arch/mips/bcm63xx/boards/Makefile -+++ b/arch/mips/bcm63xx/boards/Makefile -@@ -1,3 +1,4 @@ - obj-$(CONFIG_BOARD_BCM963XX) += board_bcm963xx.o -+obj-$(CONFIG_BOARD_LIVEBOX) += board_livebox.o - - EXTRA_CFLAGS += -Werror ---- /dev/null -+++ b/arch/mips/bcm63xx/boards/board_livebox.c -@@ -0,0 +1,228 @@ -+/* -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file "COPYING" in the main directory of this archive -+ * for more details. -+ * -+ * Copyright (C) 2008 Florian Fainelli <florian@openwrt.org> -+ */ -+ -+#include <linux/init.h> -+#include <linux/kernel.h> -+#include <linux/string.h> -+#include <linux/platform_device.h> -+#include <linux/mtd/mtd.h> -+#include <linux/mtd/partitions.h> -+#include <linux/mtd/physmap.h> -+#include <linux/input.h> -+#include <linux/gpio_buttons.h> -+#include <asm/addrspace.h> -+#include <bcm63xx_board.h> -+#include <bcm63xx_cpu.h> -+#include <bcm63xx_regs.h> -+#include <bcm63xx_io.h> -+#include <bcm63xx_dev_uart.h> -+#include <bcm63xx_dev_pci.h> -+#include <bcm63xx_dev_enet.h> -+#include <bcm63xx_dev_pcmcia.h> -+#include <bcm63xx_dev_usb_ohci.h> -+#include <bcm63xx_dev_usb_ehci.h> -+#include <board_bcm963xx.h> -+ -+#define PFX "board_livebox: " -+ -+static unsigned int mac_addr_used = 0; -+static struct board_info board; -+ -+/* -+ * known 6348 boards -+ */ -+#ifdef CONFIG_BCM63XX_CPU_6348 -+static struct board_info __initdata board_livebox = { -+ .name = "Livebox", -+ .expected_cpu_id = 0x6348, -+ -+ .has_uart0 = 1, -+ .has_enet0 = 1, -+ .has_enet1 = 1, -+ .has_pci = 1, -+ -+ .enet0 = { -+ .has_phy = 1, -+ .use_internal_phy = 1, -+ }, -+ -+ .enet1 = { -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+ -+ .has_ohci0 = 1, -+ .has_pccard = 1, -+ .has_ehci0 = 1, -+}; -+#endif -+ -+/* -+ * all boards -+ */ -+static const struct board_info __initdata *bcm963xx_boards[] = { -+#ifdef CONFIG_BCM63XX_CPU_6348 -+ &board_livebox -+#endif -+}; -+ -+/* -+ * early init callback -+ */ -+void __init board_prom_init(void) -+{ -+ u32 val; -+ -+ /* read base address of boot chip select (0) */ -+ val = bcm_mpi_readl(MPI_CSBASE_REG(0)); -+ val &= MPI_CSBASE_BASE_MASK; -+ -+ /* assume board is a Livebox */ -+ memcpy(&board, bcm963xx_boards[0], sizeof(board)); -+ -+ /* setup pin multiplexing depending on board enabled device, -+ * this has to be done this early since PCI init is done -+ * inside arch_initcall */ -+ val = 0; -+ -+ if (board.has_pci) { -+ bcm63xx_pci_enabled = 1; -+ if (BCMCPU_IS_6348()) -+ val |= GPIO_MODE_6348_G2_PCI; -+ } -+ -+ if (board.has_pccard) { -+ if (BCMCPU_IS_6348()) -+ val |= GPIO_MODE_6348_G1_MII_PCCARD; -+ } -+ -+ if (board.has_enet0 && !board.enet0.use_internal_phy) { -+ if (BCMCPU_IS_6348()) -+ val |= GPIO_MODE_6348_G3_EXT_MII | -+ GPIO_MODE_6348_G0_EXT_MII; -+ } -+ -+ if (board.has_enet1 && !board.enet1.use_internal_phy) { -+ if (BCMCPU_IS_6348()) -+ val |= GPIO_MODE_6348_G3_EXT_MII | -+ GPIO_MODE_6348_G0_EXT_MII; -+ } -+ -+ bcm_gpio_writel(val, GPIO_MODE_REG); -+} -+ -+/* -+ * second stage init callback, good time to panic if we couldn't -+ * identify on which board we're running since early printk is working -+ */ -+void __init board_setup(void) -+{ -+ if (!board.name[0]) -+ panic("unable to detect bcm963xx board"); -+ printk(KERN_INFO PFX "board name: %s\n", board.name); -+ -+ /* make sure we're running on expected cpu */ -+ if (bcm63xx_get_cpu_id() != board.expected_cpu_id) -+ panic("unexpected CPU for bcm963xx board"); -+} -+ -+/* -+ * return board name for /proc/cpuinfo -+ */ -+const char *board_get_name(void) -+{ -+ return board.name; -+} -+ -+/* -+ * register & return a new board mac address -+ */ -+ -+static int board_get_mac_address(u8 *mac) -+{ -+ u8 default_mac[ETH_ALEN] = {0x00, 0x07, 0x3A, 0x00, 0x00, 0x00}; -+ u8 *p; -+ int count; -+ -+ memcpy(mac, default_mac, ETH_ALEN); -+ -+ p = mac + ETH_ALEN - 1; -+ count = mac_addr_used; -+ -+ while (count--) { -+ do { -+ (*p)++; -+ if (*p != 0) -+ break; -+ p--; -+ } while (p != mac); -+ } -+ -+ if (p == mac) { -+ printk(KERN_ERR PFX "unable to fetch mac address\n"); -+ return -ENODEV; -+ } -+ mac_addr_used++; -+ -+ return 0; -+} -+ -+static struct resource mtd_resources[] = { -+ { -+ .start = 0, /* filled at runtime */ -+ .end = 0, /* filled at runtime */ -+ .flags = IORESOURCE_MEM, -+ } -+}; -+ -+static struct platform_device mtd_dev = { -+ .name = "bcm963xx-flash", -+ .resource = mtd_resources, -+ .num_resources = ARRAY_SIZE(mtd_resources), -+}; -+ -+ -+/* -+ * third stage init callback, register all board devices. -+ */ -+int __init board_register_devices(void) -+{ -+ u32 val; -+ -+ if (board.has_uart0) -+ bcm63xx_uart_register(0); -+ -+ if (board.has_pccard) -+ bcm63xx_pcmcia_register(); -+ -+ if (board.has_enet0 && -+ !board_get_mac_address(board.enet0.mac_addr)) -+ bcm63xx_enet_register(0, &board.enet0); -+ -+ if (board.has_enet1 && -+ !board_get_mac_address(board.enet1.mac_addr)) -+ bcm63xx_enet_register(1, &board.enet1); -+ -+ if (board.has_ohci0) -+ bcm63xx_ohci_register(); -+ -+ if (board.has_ehci0) -+ bcm63xx_ehci_register(); -+ -+ -+ /* read base address of boot chip select (0) */ -+ val = bcm_mpi_readl(MPI_CSBASE_REG(0)); -+ val &= MPI_CSBASE_BASE_MASK; -+ mtd_resources[0].start = val; -+ mtd_resources[0].end = 0x1FFFFFFF; -+ -+ platform_device_register(&mtd_dev); -+ -+ return 0; -+} -+ diff --git a/target/linux/brcm63xx/patches-2.6.37/455-board_ct536_ct5621.patch b/target/linux/brcm63xx/patches-2.6.37/455-board_ct536_ct5621.patch deleted file mode 100644 index 1af07ae11..000000000 --- a/target/linux/brcm63xx/patches-2.6.37/455-board_ct536_ct5621.patch +++ /dev/null @@ -1,60 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -457,6 +457,49 @@ static struct board_info __initdata boar - }; - - -+static struct board_info __initdata board_ct536_ct5621 = { -+ .name = "CT536_CT5621", -+ .expected_cpu_id = 0x6348, -+ -+ .has_uart0 = 1, -+ .has_enet0 = 0, -+ .has_enet1 = 1, -+ .has_pci = 1, -+ -+ .enet1 = { -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+ -+ .has_ohci0 = 1, -+ .has_pccard = 1, -+ .has_ehci0 = 1, -+ -+ .leds = { -+ { -+ .name = "adsl-fail", -+ .gpio = 2, -+ .active_low = 1, -+ }, -+ { -+ .name = "power", -+ .gpio = 0, -+ .active_low = 1, -+ .default_trigger = "default-on", -+ }, -+ }, -+ .buttons = { -+ { -+ .desc = "reset", -+ .gpio = 33, -+ .active_low = 1, -+ .type = EV_KEY, -+ .code = KEY_RESTART, -+ .threshold = 3, -+ }, -+ }, -+}; -+ - static struct board_info __initdata board_96348gw = { - .name = "96348GW", - .expected_cpu_id = 0x6348, -@@ -2024,6 +2067,7 @@ static const struct board_info __initdat - &board_96348sv, - &board_V2500V_BB, - &board_V2110, -+ &board_ct536_ct5621, - #endif - - #ifdef CONFIG_BCM63XX_CPU_6358 diff --git a/target/linux/brcm63xx/patches-2.6.37/456-board-RTA770BW.patch b/target/linux/brcm63xx/patches-2.6.37/456-board-RTA770BW.patch deleted file mode 100644 index f1f147d6d..000000000 --- a/target/linux/brcm63xx/patches-2.6.37/456-board-RTA770BW.patch +++ /dev/null @@ -1,24 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -227,6 +227,13 @@ static struct board_info __initdata boar - - .has_uart0 = 1, - }; -+ -+static struct board_info __initdata board_ra770bw = { -+ .name = "RTA770BW", -+ .expected_cpu_id = 0x6345, -+ -+ .has_uart0 = 1, -+}; - #endif - - /* -@@ -2050,6 +2057,7 @@ static const struct board_info __initdat - #endif - #ifdef CONFIG_BCM63XX_CPU_6345 - &board_96345gw2, -+ &board_ra770bw, - #endif - #ifdef CONFIG_BCM63XX_CPU_6348 - &board_96348r, diff --git a/target/linux/brcm63xx/patches-2.6.37/500-ssb-add-callback-for-sprom.patch b/target/linux/brcm63xx/patches-2.6.37/500-ssb-add-callback-for-sprom.patch deleted file mode 100644 index 349e5f500..000000000 --- a/target/linux/brcm63xx/patches-2.6.37/500-ssb-add-callback-for-sprom.patch +++ /dev/null @@ -1,143 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -2128,6 +2128,17 @@ static struct ssb_sprom bcm63xx_sprom = - .boardflags_lo = 0x2848, - .boardflags_hi = 0x0000, - }; -+ -+int bcm63xx_get_fallback_sprom(struct ssb_bus *bus, struct ssb_sprom *out) -+{ -+ if (bus->bustype == SSB_BUSTYPE_PCI) { -+ memcpy(out, &bcm63xx_sprom, sizeof(struct ssb_sprom)); -+ return 0; -+ } else { -+ printk(KERN_ERR PFX "unable to fill SPROM for given bustype.\n"); -+ return -EINVAL; -+ } -+} - #endif - - /* -@@ -2328,8 +2339,9 @@ void __init board_prom_init(void) - if (!board_get_mac_address(bcm63xx_sprom.il0mac)) { - memcpy(bcm63xx_sprom.et0mac, bcm63xx_sprom.il0mac, ETH_ALEN); - memcpy(bcm63xx_sprom.et1mac, bcm63xx_sprom.il0mac, ETH_ALEN); -- if (ssb_arch_set_fallback_sprom(&bcm63xx_sprom) < 0) -- printk(KERN_ERR "failed to register fallback SPROM\n"); -+ if (ssb_arch_register_fallback_sprom( -+ &bcm63xx_get_fallback_sprom) < 0) -+ printk(KERN_ERR PFX "failed to register fallback SPROM\n"); - } - #endif - } ---- a/drivers/ssb/pci.c -+++ b/drivers/ssb/pci.c -@@ -662,7 +662,6 @@ static int sprom_extract(struct ssb_bus - static int ssb_pci_sprom_get(struct ssb_bus *bus, - struct ssb_sprom *sprom) - { -- const struct ssb_sprom *fallback; - int err; - u16 *buf; - -@@ -707,10 +706,14 @@ static int ssb_pci_sprom_get(struct ssb_ - if (err) { - /* All CRC attempts failed. - * Maybe there is no SPROM on the device? -- * If we have a fallback, use that. */ -- fallback = ssb_get_fallback_sprom(); -- if (fallback) { -- memcpy(sprom, fallback, sizeof(*sprom)); -+ * Now we ask the arch code if there is some sprom -+ * avaliable for this device in some other storage */ -+ err = ssb_fill_sprom_with_fallback(bus, sprom); -+ if (err) { -+ ssb_printk(KERN_WARNING PFX "WARNING: Using" -+ " fallback SPROM failed (err %d)\n", -+ err); -+ } else { - err = 0; - goto out_free; - } ---- a/drivers/ssb/sprom.c -+++ b/drivers/ssb/sprom.c -@@ -17,7 +17,7 @@ - #include <linux/slab.h> - - --static const struct ssb_sprom *fallback_sprom; -+static int(*get_fallback_sprom)(struct ssb_bus *dev, struct ssb_sprom *out); - - - static int sprom2hex(const u16 *sprom, char *buf, size_t buf_len, -@@ -145,13 +145,14 @@ out: - } - - /** -- * ssb_arch_set_fallback_sprom - Set a fallback SPROM for use if no SPROM is found. -+ * ssb_arch_register_fallback_sprom - Registers a method providing a fallback -+ * SPROM if no SPROM is found. - * -- * @sprom: The SPROM data structure to register. -+ * @sprom_callback: The callbcak function. - * -- * With this function the architecture implementation may register a fallback -- * SPROM data structure. The fallback is only used for PCI based SSB devices, -- * where no valid SPROM can be found in the shadow registers. -+ * With this function the architecture implementation may register a callback -+ * handler which wills the SPROM data structure. The fallback is only used for -+ * PCI based SSB devices, where no valid SPROM can be found in the shadow registers. - * - * This function is useful for weird architectures that have a half-assed SSB device - * hardwired to their PCI bus. -@@ -163,18 +164,21 @@ out: - * - * This function is available for architecture code, only. So it is not exported. - */ --int ssb_arch_set_fallback_sprom(const struct ssb_sprom *sprom) -+int ssb_arch_register_fallback_sprom(int (*sprom_callback)(struct ssb_bus *bus, struct ssb_sprom *out)) - { -- if (fallback_sprom) -+ if (get_fallback_sprom) - return -EEXIST; -- fallback_sprom = sprom; -+ get_fallback_sprom = sprom_callback; - - return 0; - } - --const struct ssb_sprom *ssb_get_fallback_sprom(void) -+int ssb_fill_sprom_with_fallback(struct ssb_bus *bus, struct ssb_sprom *out) - { -- return fallback_sprom; -+ if (!get_fallback_sprom) -+ return -ENOENT; -+ -+ return get_fallback_sprom(bus, out); - } - - /* http://bcm-v4.sipsolutions.net/802.11/IsSpromAvailable */ ---- a/drivers/ssb/ssb_private.h -+++ b/drivers/ssb/ssb_private.h -@@ -171,7 +171,7 @@ ssize_t ssb_attr_sprom_store(struct ssb_ - const char *buf, size_t count, - int (*sprom_check_crc)(const u16 *sprom, size_t size), - int (*sprom_write)(struct ssb_bus *bus, const u16 *sprom)); --extern const struct ssb_sprom *ssb_get_fallback_sprom(void); -+extern int ssb_fill_sprom_with_fallback(struct ssb_bus *bus, struct ssb_sprom *out); - - - /* core.c */ ---- a/include/linux/ssb/ssb.h -+++ b/include/linux/ssb/ssb.h -@@ -404,7 +404,9 @@ extern bool ssb_is_sprom_available(struc - - /* Set a fallback SPROM. - * See kdoc at the function definition for complete documentation. */ --extern int ssb_arch_set_fallback_sprom(const struct ssb_sprom *sprom); -+extern int ssb_arch_register_fallback_sprom( -+ int (*sprom_callback)(struct ssb_bus *bus, -+ struct ssb_sprom *out)); - - /* Suspend a SSB bus. - * Call this from the parent bus suspend routine. */ diff --git a/target/linux/brcm63xx/patches-2.6.37/977-ssb_export_fallback_sprom.patch b/target/linux/brcm63xx/patches-2.6.37/977-ssb_export_fallback_sprom.patch deleted file mode 100644 index 478019d99..000000000 --- a/target/linux/brcm63xx/patches-2.6.37/977-ssb_export_fallback_sprom.patch +++ /dev/null @@ -1,19 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -2108,7 +2108,7 @@ static void __init nb4_nvram_fixup(void) - * bcm4318 WLAN work - */ - #ifdef CONFIG_SSB_PCIHOST --static struct ssb_sprom bcm63xx_sprom = { -+struct ssb_sprom bcm63xx_sprom = { - .revision = 0x02, - .board_rev = 0x17, - .country_code = 0x0, -@@ -2128,6 +2128,7 @@ static struct ssb_sprom bcm63xx_sprom = - .boardflags_lo = 0x2848, - .boardflags_hi = 0x0000, - }; -+EXPORT_SYMBOL(bcm63xx_sprom); - - int bcm63xx_get_fallback_sprom(struct ssb_bus *bus, struct ssb_sprom *out) - { diff --git a/target/linux/brcm63xx/patches-2.6.38/007-usb-ohci-support.patch b/target/linux/brcm63xx/patches-2.6.38/007-usb-ohci-support.patch deleted file mode 100644 index a70b5012e..000000000 --- a/target/linux/brcm63xx/patches-2.6.38/007-usb-ohci-support.patch +++ /dev/null @@ -1,125 +0,0 @@ -The bcm63xx SOC has an integrated OHCI controller, this patch adds -platform device registration and change board code to register ohci -device when necessary. - -Signed-off-by: Maxime Bizon <mbizon@freebox.fr> ---- - arch/mips/bcm63xx/Kconfig | 6 ++ - arch/mips/bcm63xx/Makefile | 3 +- - arch/mips/bcm63xx/boards/board_bcm963xx.c | 4 ++ - arch/mips/bcm63xx/dev-usb-ohci.c | 49 ++++++++++++++++++++ - .../asm/mach-bcm63xx/bcm63xx_dev_usb_ohci.h | 6 ++ - 5 files changed, 67 insertions(+), 1 deletions(-) - create mode 100644 arch/mips/bcm63xx/dev-usb-ohci.c - create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ohci.h - ---- a/arch/mips/bcm63xx/Kconfig -+++ b/arch/mips/bcm63xx/Kconfig -@@ -16,10 +16,16 @@ config BCM63XX_CPU_6345 - config BCM63XX_CPU_6348 - bool "support 6348 CPU" - select HW_HAS_PCI -+ select USB_ARCH_HAS_OHCI -+ select USB_OHCI_BIG_ENDIAN_DESC -+ select USB_OHCI_BIG_ENDIAN_MMIO - - config BCM63XX_CPU_6358 - bool "support 6358 CPU" - select HW_HAS_PCI -+ select USB_ARCH_HAS_OHCI -+ select USB_OHCI_BIG_ENDIAN_DESC -+ select USB_OHCI_BIG_ENDIAN_MMIO - endmenu - - source "arch/mips/bcm63xx/boards/Kconfig" ---- a/arch/mips/bcm63xx/Makefile -+++ b/arch/mips/bcm63xx/Makefile -@@ -1,5 +1,6 @@ - obj-y += clk.o cpu.o cs.o gpio.o irq.o prom.o setup.o timer.o \ -- dev-dsp.o dev-enet.o dev-pcmcia.o dev-uart.o dev-wdt.o -+ dev-dsp.o dev-enet.o dev-pcmcia.o dev-uart.o dev-wdt.o \ -+ dev-usb-ohci.o - obj-$(CONFIG_EARLY_PRINTK) += early_printk.o - - obj-y += boards/ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -25,6 +25,7 @@ - #include <bcm63xx_dev_enet.h> - #include <bcm63xx_dev_dsp.h> - #include <bcm63xx_dev_pcmcia.h> -+#include <bcm63xx_dev_usb_ohci.h> - #include <board_bcm963xx.h> - - #define PFX "board_bcm963xx: " -@@ -877,6 +878,9 @@ int __init board_register_devices(void) - !board_get_mac_address(board.enet1.mac_addr)) - bcm63xx_enet_register(1, &board.enet1); - -+ if (board.has_ohci0) -+ bcm63xx_ohci_register(); -+ - if (board.has_dsp) - bcm63xx_dsp_register(&board.dsp); - ---- /dev/null -+++ b/arch/mips/bcm63xx/dev-usb-ohci.c -@@ -0,0 +1,49 @@ -+/* -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file "COPYING" in the main directory of this archive -+ * for more details. -+ * -+ * Copyright (C) 2010 Maxime Bizon <mbizon@freebox.fr> -+ */ -+ -+#include <linux/init.h> -+#include <linux/kernel.h> -+#include <linux/platform_device.h> -+#include <bcm63xx_cpu.h> -+#include <bcm63xx_dev_usb_ohci.h> -+ -+static struct resource ohci_resources[] = { -+ { -+ /* start & end filled at runtime */ -+ .flags = IORESOURCE_MEM, -+ }, -+ { -+ /* start filled at runtime */ -+ .flags = IORESOURCE_IRQ, -+ }, -+}; -+ -+static u64 ohci_dmamask = ~(u32)0; -+ -+static struct platform_device bcm63xx_ohci_device = { -+ .name = "bcm63xx_ohci", -+ .id = 0, -+ .num_resources = ARRAY_SIZE(ohci_resources), -+ .resource = ohci_resources, -+ .dev = { -+ .dma_mask = &ohci_dmamask, -+ .coherent_dma_mask = 0xffffffff, -+ }, -+}; -+ -+int __init bcm63xx_ohci_register(void) -+{ -+ if (!BCMCPU_IS_6348() && !BCMCPU_IS_6358()) -+ return 0; -+ -+ ohci_resources[0].start = bcm63xx_regset_address(RSET_OHCI0); -+ ohci_resources[0].end = ohci_resources[0].start; -+ ohci_resources[0].end += RSET_OHCI_SIZE - 1; -+ ohci_resources[1].start = bcm63xx_get_irq_number(IRQ_OHCI0); -+ return platform_device_register(&bcm63xx_ohci_device); -+} ---- /dev/null -+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ohci.h -@@ -0,0 +1,6 @@ -+#ifndef BCM63XX_DEV_USB_OHCI_H_ -+#define BCM63XX_DEV_USB_OHCI_H_ -+ -+int bcm63xx_ohci_register(void); -+ -+#endif /* BCM63XX_DEV_USB_OHCI_H_ */ diff --git a/target/linux/brcm63xx/patches-2.6.38/008-usb-ehci-support.patch b/target/linux/brcm63xx/patches-2.6.38/008-usb-ehci-support.patch deleted file mode 100644 index 0c236f0b7..000000000 --- a/target/linux/brcm63xx/patches-2.6.38/008-usb-ehci-support.patch +++ /dev/null @@ -1,117 +0,0 @@ -The bcm63xx SOC has an integrated EHCI controller, this patch adds -platform device registration and change board code to register -EHCI device when necessary. - -Signed-off-by: Maxime Bizon <mbizon@freebox.fr> ---- - arch/mips/bcm63xx/Kconfig | 2 + - arch/mips/bcm63xx/Makefile | 2 +- - arch/mips/bcm63xx/boards/board_bcm963xx.c | 4 ++ - arch/mips/bcm63xx/dev-usb-ehci.c | 49 ++++++++++++++++++++ - .../asm/mach-bcm63xx/bcm63xx_dev_usb_ehci.h | 6 ++ - 5 files changed, 62 insertions(+), 1 deletions(-) - create mode 100644 arch/mips/bcm63xx/dev-usb-ehci.c - create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ehci.h - ---- a/arch/mips/bcm63xx/Kconfig -+++ b/arch/mips/bcm63xx/Kconfig -@@ -26,6 +26,8 @@ config BCM63XX_CPU_6358 - select USB_ARCH_HAS_OHCI - select USB_OHCI_BIG_ENDIAN_DESC - select USB_OHCI_BIG_ENDIAN_MMIO -+ select USB_ARCH_HAS_EHCI -+ select USB_EHCI_BIG_ENDIAN_MMIO - endmenu - - source "arch/mips/bcm63xx/boards/Kconfig" ---- a/arch/mips/bcm63xx/Makefile -+++ b/arch/mips/bcm63xx/Makefile -@@ -1,6 +1,6 @@ - obj-y += clk.o cpu.o cs.o gpio.o irq.o prom.o setup.o timer.o \ - dev-dsp.o dev-enet.o dev-pcmcia.o dev-uart.o dev-wdt.o \ -- dev-usb-ohci.o -+ dev-usb-ohci.o dev-usb-ehci.o - obj-$(CONFIG_EARLY_PRINTK) += early_printk.o - - obj-y += boards/ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -26,6 +26,7 @@ - #include <bcm63xx_dev_dsp.h> - #include <bcm63xx_dev_pcmcia.h> - #include <bcm63xx_dev_usb_ohci.h> -+#include <bcm63xx_dev_usb_ehci.h> - #include <board_bcm963xx.h> - - #define PFX "board_bcm963xx: " -@@ -878,6 +879,9 @@ int __init board_register_devices(void) - !board_get_mac_address(board.enet1.mac_addr)) - bcm63xx_enet_register(1, &board.enet1); - -+ if (board.has_ehci0) -+ bcm63xx_ehci_register(); -+ - if (board.has_ohci0) - bcm63xx_ohci_register(); - ---- /dev/null -+++ b/arch/mips/bcm63xx/dev-usb-ehci.c -@@ -0,0 +1,49 @@ -+/* -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file "COPYING" in the main directory of this archive -+ * for more details. -+ * -+ * Copyright (C) 2010 Maxime Bizon <mbizon@freebox.fr> -+ */ -+ -+#include <linux/init.h> -+#include <linux/kernel.h> -+#include <linux/platform_device.h> -+#include <bcm63xx_cpu.h> -+#include <bcm63xx_dev_usb_ehci.h> -+ -+static struct resource ehci_resources[] = { -+ { -+ /* start & end filled at runtime */ -+ .flags = IORESOURCE_MEM, -+ }, -+ { -+ /* start filled at runtime */ -+ .flags = IORESOURCE_IRQ, -+ }, -+}; -+ -+static u64 ehci_dmamask = ~(u32)0; -+ -+static struct platform_device bcm63xx_ehci_device = { -+ .name = "bcm63xx_ehci", -+ .id = 0, -+ .num_resources = ARRAY_SIZE(ehci_resources), -+ .resource = ehci_resources, -+ .dev = { -+ .dma_mask = &ehci_dmamask, -+ .coherent_dma_mask = 0xffffffff, -+ }, -+}; -+ -+int __init bcm63xx_ehci_register(void) -+{ -+ if (!BCMCPU_IS_6358()) -+ return 0; -+ -+ ehci_resources[0].start = bcm63xx_regset_address(RSET_EHCI0); -+ ehci_resources[0].end = ehci_resources[0].start; -+ ehci_resources[0].end += RSET_EHCI_SIZE - 1; -+ ehci_resources[1].start = bcm63xx_get_irq_number(IRQ_EHCI0); -+ return platform_device_register(&bcm63xx_ehci_device); -+} ---- /dev/null -+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ehci.h -@@ -0,0 +1,6 @@ -+#ifndef BCM63XX_DEV_USB_EHCI_H_ -+#define BCM63XX_DEV_USB_EHCI_H_ -+ -+int bcm63xx_ehci_register(void); -+ -+#endif /* BCM63XX_DEV_USB_EHCI_H_ */ diff --git a/target/linux/brcm63xx/patches-2.6.38/010-add_bcm63xx_ohci_controller.patch b/target/linux/brcm63xx/patches-2.6.38/010-add_bcm63xx_ohci_controller.patch deleted file mode 100644 index 7faf7c6de..000000000 --- a/target/linux/brcm63xx/patches-2.6.38/010-add_bcm63xx_ohci_controller.patch +++ /dev/null @@ -1,202 +0,0 @@ -Signed-off-by: Maxime Bizon <mbizon@freebox.fr> ---- - drivers/usb/host/ohci-bcm63xx.c | 166 +++++++++++++++++++++++++++++++++++++++ - drivers/usb/host/ohci-hcd.c | 5 + - drivers/usb/host/ohci.h | 2 +- - 3 files changed, 172 insertions(+), 1 deletions(-) - create mode 100644 drivers/usb/host/ohci-bcm63xx.c - ---- /dev/null -+++ b/drivers/usb/host/ohci-bcm63xx.c -@@ -0,0 +1,166 @@ -+/* -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file "COPYING" in the main directory of this archive -+ * for more details. -+ * -+ * Copyright (C) 2010 Maxime Bizon <mbizon@freebox.fr> -+ */ -+ -+#include <linux/init.h> -+#include <linux/clk.h> -+#include <linux/platform_device.h> -+#include <bcm63xx_cpu.h> -+#include <bcm63xx_regs.h> -+#include <bcm63xx_io.h> -+ -+static struct clk *usb_host_clock; -+ -+static int __devinit ohci_bcm63xx_start(struct usb_hcd *hcd) -+{ -+ struct ohci_hcd *ohci = hcd_to_ohci(hcd); -+ int ret; -+ -+ /* -+ * port 2 can be shared with USB slave, but all boards seem to -+ * have only one host port populated, so we can hardcode it -+ */ -+ ohci->num_ports = 1; -+ -+ ret = ohci_init(ohci); -+ if (ret < 0) -+ return ret; -+ -+ ret = ohci_run(ohci); -+ if (ret < 0) { -+ err("can't start %s", hcd->self.bus_name); -+ ohci_stop(hcd); -+ return ret; -+ } -+ return 0; -+} -+ -+static const struct hc_driver ohci_bcm63xx_hc_driver = { -+ .description = hcd_name, -+ .product_desc = "BCM63XX integrated OHCI controller", -+ .hcd_priv_size = sizeof(struct ohci_hcd), -+ -+ .irq = ohci_irq, -+ .flags = HCD_USB11 | HCD_MEMORY, -+ .start = ohci_bcm63xx_start, -+ .stop = ohci_stop, -+ .shutdown = ohci_shutdown, -+ .urb_enqueue = ohci_urb_enqueue, -+ .urb_dequeue = ohci_urb_dequeue, -+ .endpoint_disable = ohci_endpoint_disable, -+ .get_frame_number = ohci_get_frame, -+ .hub_status_data = ohci_hub_status_data, -+ .hub_control = ohci_hub_control, -+ .start_port_reset = ohci_start_port_reset, -+}; -+ -+static int __devinit ohci_hcd_bcm63xx_drv_probe(struct platform_device *pdev) -+{ -+ struct resource *res_mem; -+ struct usb_hcd *hcd; -+ struct ohci_hcd *ohci; -+ u32 reg; -+ int ret, irq; -+ -+ res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ irq = platform_get_irq(pdev, 0); -+ if (!res_mem || irq < 0) -+ return -ENODEV; -+ -+ if (BCMCPU_IS_6348()) { -+ struct clk *clk; -+ /* enable USB host clock */ -+ clk = clk_get(&pdev->dev, "usbh"); -+ if (IS_ERR(clk)) -+ return -ENODEV; -+ -+ clk_enable(clk); -+ usb_host_clock = clk; -+ bcm_rset_writel(RSET_OHCI_PRIV, 0, OHCI_PRIV_REG); -+ -+ } else if (BCMCPU_IS_6358()) { -+ reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_REG); -+ reg &= ~USBH_PRIV_SWAP_OHCI_ENDN_MASK; -+ reg |= USBH_PRIV_SWAP_OHCI_DATA_MASK; -+ bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_REG); -+ /* -+ * The magic value comes for the original vendor BSP -+ * and is needed for USB to work. Datasheet does not -+ * help, so the magic value is used as-is. -+ */ -+ bcm_rset_writel(RSET_USBH_PRIV, 0x1c0020, USBH_PRIV_TEST_REG); -+ } else -+ return 0; -+ -+ hcd = usb_create_hcd(&ohci_bcm63xx_hc_driver, &pdev->dev, "bcm63xx"); -+ if (!hcd) -+ return -ENOMEM; -+ hcd->rsrc_start = res_mem->start; -+ hcd->rsrc_len = res_mem->end - res_mem->start + 1; -+ -+ if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { -+ pr_debug("request_mem_region failed\n"); -+ ret = -EBUSY; -+ goto out; -+ } -+ -+ hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); -+ if (!hcd->regs) { -+ pr_debug("ioremap failed\n"); -+ ret = -EIO; -+ goto out1; -+ } -+ -+ ohci = hcd_to_ohci(hcd); -+ ohci->flags |= OHCI_QUIRK_BE_MMIO | OHCI_QUIRK_BE_DESC | -+ OHCI_QUIRK_FRAME_NO; -+ ohci_hcd_init(ohci); -+ -+ ret = usb_add_hcd(hcd, irq, IRQF_DISABLED); -+ if (ret) -+ goto out2; -+ -+ platform_set_drvdata(pdev, hcd); -+ return 0; -+ -+out2: -+ iounmap(hcd->regs); -+out1: -+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len); -+out: -+ usb_put_hcd(hcd); -+ return ret; -+} -+ -+static int __devexit ohci_hcd_bcm63xx_drv_remove(struct platform_device *pdev) -+{ -+ struct usb_hcd *hcd; -+ -+ hcd = platform_get_drvdata(pdev); -+ usb_remove_hcd(hcd); -+ iounmap(hcd->regs); -+ usb_put_hcd(hcd); -+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len); -+ if (usb_host_clock) { -+ clk_disable(usb_host_clock); -+ clk_put(usb_host_clock); -+ } -+ platform_set_drvdata(pdev, NULL); -+ return 0; -+} -+ -+static struct platform_driver ohci_hcd_bcm63xx_driver = { -+ .probe = ohci_hcd_bcm63xx_drv_probe, -+ .remove = __devexit_p(ohci_hcd_bcm63xx_drv_remove), -+ .shutdown = usb_hcd_platform_shutdown, -+ .driver = { -+ .name = "bcm63xx_ohci", -+ .owner = THIS_MODULE, -+ }, -+}; -+ -+MODULE_ALIAS("platform:bcm63xx_ohci"); ---- a/drivers/usb/host/ohci-hcd.c -+++ b/drivers/usb/host/ohci-hcd.c -@@ -1068,6 +1068,11 @@ MODULE_LICENSE ("GPL"); - #define PLATFORM_DRIVER ohci_hcd_da8xx_driver - #endif - -+#ifdef CONFIG_BCM63XX -+#include "ohci-bcm63xx.c" -+#define PLATFORM_DRIVER ohci_hcd_bcm63xx_driver -+#endif -+ - #if defined(CONFIG_CPU_SUBTYPE_SH7720) || \ - defined(CONFIG_CPU_SUBTYPE_SH7721) || \ - defined(CONFIG_CPU_SUBTYPE_SH7763) || \ ---- a/drivers/usb/host/ohci.h -+++ b/drivers/usb/host/ohci.h -@@ -656,7 +656,7 @@ static inline u32 hc32_to_cpup (const st - * some big-endian SOC implementations. Same thing happens with PSW access. - */ - --#ifdef CONFIG_PPC_MPC52xx -+#if defined(CONFIG_PPC_MPC52xx) || defined(CONFIG_BCM63XX) - #define big_endian_frame_no_quirk(ohci) (ohci->flags & OHCI_QUIRK_FRAME_NO) - #else - #define big_endian_frame_no_quirk(ohci) 0 diff --git a/target/linux/brcm63xx/patches-2.6.38/011-add_bcm63xx_ehci_controller.patch b/target/linux/brcm63xx/patches-2.6.38/011-add_bcm63xx_ehci_controller.patch deleted file mode 100644 index 28a1b2b51..000000000 --- a/target/linux/brcm63xx/patches-2.6.38/011-add_bcm63xx_ehci_controller.patch +++ /dev/null @@ -1,178 +0,0 @@ -Signed-off-by: Maxime Bizon <mbizon@freebox.fr> ---- - drivers/usb/host/ehci-bcm63xx.c | 154 +++++++++++++++++++++++++++++++++++++++ - drivers/usb/host/ehci-hcd.c | 5 + - 2 files changed, 159 insertions(+), 0 deletions(-) - create mode 100644 drivers/usb/host/ehci-bcm63xx.c - ---- /dev/null -+++ b/drivers/usb/host/ehci-bcm63xx.c -@@ -0,0 +1,154 @@ -+/* -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file "COPYING" in the main directory of this archive -+ * for more details. -+ * -+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr> -+ */ -+ -+#include <linux/init.h> -+#include <linux/platform_device.h> -+#include <bcm63xx_cpu.h> -+#include <bcm63xx_regs.h> -+#include <bcm63xx_io.h> -+ -+static int ehci_bcm63xx_setup(struct usb_hcd *hcd) -+{ -+ struct ehci_hcd *ehci = hcd_to_ehci(hcd); -+ int retval; -+ -+ retval = ehci_halt(ehci); -+ if (retval) -+ return retval; -+ -+ retval = ehci_init(hcd); -+ if (retval) -+ return retval; -+ -+ ehci_reset(ehci); -+ ehci_port_power(ehci, 0); -+ -+ return retval; -+} -+ -+ -+static const struct hc_driver ehci_bcm63xx_hc_driver = { -+ .description = hcd_name, -+ .product_desc = "BCM63XX integrated EHCI controller", -+ .hcd_priv_size = sizeof(struct ehci_hcd), -+ -+ .irq = ehci_irq, -+ .flags = HCD_MEMORY | HCD_USB2, -+ -+ .reset = ehci_bcm63xx_setup, -+ .start = ehci_run, -+ .stop = ehci_stop, -+ .shutdown = ehci_shutdown, -+ -+ .urb_enqueue = ehci_urb_enqueue, -+ .urb_dequeue = ehci_urb_dequeue, -+ .endpoint_disable = ehci_endpoint_disable, -+ -+ .get_frame_number = ehci_get_frame, -+ -+ .hub_status_data = ehci_hub_status_data, -+ .hub_control = ehci_hub_control, -+ .bus_suspend = ehci_bus_suspend, -+ .bus_resume = ehci_bus_resume, -+ .relinquish_port = ehci_relinquish_port, -+ .port_handed_over = ehci_port_handed_over, -+}; -+ -+static int __devinit ehci_hcd_bcm63xx_drv_probe(struct platform_device *pdev) -+{ -+ struct resource *res_mem; -+ struct usb_hcd *hcd; -+ struct ehci_hcd *ehci; -+ u32 reg; -+ int ret, irq; -+ -+ res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ irq = platform_get_irq(pdev, 0);; -+ if (!res_mem || irq < 0) -+ return -ENODEV; -+ -+ reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_REG); -+ reg &= ~USBH_PRIV_SWAP_EHCI_DATA_MASK; -+ reg |= USBH_PRIV_SWAP_EHCI_ENDN_MASK; -+ bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_REG); -+ -+ /* -+ * The magic value comes for the original vendor BSP and is -+ * needed for USB to work. Datasheet does not help, so the -+ * magic value is used as-is. -+ */ -+ bcm_rset_writel(RSET_USBH_PRIV, 0x1c0020, USBH_PRIV_TEST_REG); -+ -+ hcd = usb_create_hcd(&ehci_bcm63xx_hc_driver, &pdev->dev, "bcm63xx"); -+ if (!hcd) -+ return -ENOMEM; -+ hcd->rsrc_start = res_mem->start; -+ hcd->rsrc_len = res_mem->end - res_mem->start + 1; -+ -+ if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { -+ pr_debug("request_mem_region failed\n"); -+ ret = -EBUSY; -+ goto out; -+ } -+ -+ hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); -+ if (!hcd->regs) { -+ pr_debug("ioremap failed\n"); -+ ret = -EIO; -+ goto out1; -+ } -+ -+ ehci = hcd_to_ehci(hcd); -+ ehci->big_endian_mmio = 1; -+ ehci->big_endian_desc = 0; -+ ehci->caps = hcd->regs; -+ ehci->regs = hcd->regs + -+ HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase)); -+ ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params); -+ ehci->sbrn = 0x20; -+ -+ ret = usb_add_hcd(hcd, irq, IRQF_DISABLED); -+ if (ret) -+ goto out2; -+ -+ platform_set_drvdata(pdev, hcd); -+ return 0; -+ -+out2: -+ iounmap(hcd->regs); -+out1: -+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len); -+out: -+ usb_put_hcd(hcd); -+ return ret; -+} -+ -+static int __devexit ehci_hcd_bcm63xx_drv_remove(struct platform_device *pdev) -+{ -+ struct usb_hcd *hcd; -+ -+ hcd = platform_get_drvdata(pdev); -+ usb_remove_hcd(hcd); -+ iounmap(hcd->regs); -+ usb_put_hcd(hcd); -+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len); -+ platform_set_drvdata(pdev, NULL); -+ return 0; -+} -+ -+static struct platform_driver ehci_hcd_bcm63xx_driver = { -+ .probe = ehci_hcd_bcm63xx_drv_probe, -+ .remove = __devexit_p(ehci_hcd_bcm63xx_drv_remove), -+ .shutdown = usb_hcd_platform_shutdown, -+ .driver = { -+ .name = "bcm63xx_ehci", -+ .owner = THIS_MODULE, -+ }, -+}; -+ -+MODULE_ALIAS("platform:bcm63xx_ehci"); ---- a/drivers/usb/host/ehci-hcd.c -+++ b/drivers/usb/host/ehci-hcd.c -@@ -1254,6 +1254,11 @@ MODULE_LICENSE ("GPL"); - #define PLATFORM_DRIVER ehci_msm_driver - #endif - -+#ifdef CONFIG_BCM63XX -+#include "ehci-bcm63xx.c" -+#define PLATFORM_DRIVER ehci_hcd_bcm63xx_driver -+#endif -+ - #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \ - !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER) && \ - !defined(XILINX_OF_PLATFORM_DRIVER) diff --git a/target/linux/brcm63xx/patches-2.6.38/040-bcm963xx_flashmap.patch b/target/linux/brcm63xx/patches-2.6.38/040-bcm963xx_flashmap.patch deleted file mode 100644 index a2162302e..000000000 --- a/target/linux/brcm63xx/patches-2.6.38/040-bcm963xx_flashmap.patch +++ /dev/null @@ -1,137 +0,0 @@ -From a4d005c91d403d9f3d0272db6cc46202c06ec774 Mon Sep 17 00:00:00 2001 -From: Axel Gembe <ago@bastart.eu.org> -Date: Mon, 12 May 2008 18:54:09 +0200 -Subject: [PATCH] bcm963xx: flashmap support - -Signed-off-by: Axel Gembe <ago@bastart.eu.org> ---- - arch/mips/bcm63xx/boards/board_bcm963xx.c | 19 +---------------- - drivers/mtd/maps/bcm963xx-flash.c | 32 ++++++++++++++++++++++++---- - drivers/mtd/redboot.c | 13 +++++++++-- - 3 files changed, 38 insertions(+), 26 deletions(-) - ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -816,20 +816,6 @@ void __init board_setup(void) - panic("unexpected CPU for bcm963xx board"); - } - --static struct mtd_partition mtd_partitions[] = { -- { -- .name = "cfe", -- .offset = 0x0, -- .size = 0x40000, -- } --}; -- --static struct physmap_flash_data flash_data = { -- .width = 2, -- .nr_parts = ARRAY_SIZE(mtd_partitions), -- .parts = mtd_partitions, --}; -- - static struct resource mtd_resources[] = { - { - .start = 0, /* filled at runtime */ -@@ -839,12 +825,9 @@ static struct resource mtd_resources[] = - }; - - static struct platform_device mtd_dev = { -- .name = "physmap-flash", -+ .name = "bcm963xx-flash", - .resource = mtd_resources, - .num_resources = ARRAY_SIZE(mtd_resources), -- .dev = { -- .platform_data = &flash_data, -- }, - }; - - static struct gpio_led_platform_data bcm63xx_led_data; ---- a/drivers/mtd/maps/bcm963xx-flash.c -+++ b/drivers/mtd/maps/bcm963xx-flash.c -@@ -27,6 +27,8 @@ - #include <linux/vmalloc.h> - #include <linux/platform_device.h> - #include <linux/io.h> -+#include <linux/magic.h> -+#include <linux/jffs2.h> - - #include <asm/mach-bcm63xx/bcm963xx_tag.h> - -@@ -35,6 +37,14 @@ - - #define PFX KBUILD_MODNAME ": " - -+struct squashfs_super_block { -+ __le32 s_magic; -+ __le32 pad0[9]; -+ __le64 bytes_used; -+}; -+ -+extern int parse_redboot_partitions(struct mtd_info *master, struct mtd_partition **pparts, unsigned long fis_origin); -+ - static struct mtd_partition *parsed_parts; - - static struct mtd_info *bcm963xx_mtd_info; -@@ -219,9 +229,21 @@ probe_ok: - } - } - } else { -- dev_info(&pdev->dev, "unsupported bootloader\n"); -- err = -ENODEV; -- goto err_probe; -+ printk(KERN_INFO PFX "assuming RedBoot bootloader\n"); -+ if (bcm963xx_mtd_info->size > 0x00400000) { -+ printk(KERN_INFO PFX "Support for extended flash memory size : 0x%lx ; ONLY 64MBIT SUPPORT\n", bcm963xx_mtd_info->size); -+ bcm963xx_map.virt = (u32)(BCM63XX_EXTENDED_SIZE); -+ } -+ -+#ifdef CONFIG_MTD_REDBOOT_PARTS -+ if (parsed_nr_parts == 0) { -+ int ret = parse_redboot_partitions(bcm963xx_mtd_info, &parsed_parts, 0); -+ if (ret > 0) { -+ part_type = "RedBoot"; -+ parsed_nr_parts = ret; -+ } -+ } -+#endif - } - - return add_mtd_partitions(bcm963xx_mtd_info, parsed_parts, ---- a/drivers/mtd/redboot.c -+++ b/drivers/mtd/redboot.c -@@ -57,7 +57,7 @@ static inline int redboot_checksum(struc - return 1; - } - --static int parse_redboot_partitions(struct mtd_info *master, -+int parse_redboot_partitions(struct mtd_info *master, - struct mtd_partition **pparts, - unsigned long fis_origin) - { -@@ -180,6 +180,14 @@ static int parse_redboot_partitions(stru - goto out; - } - -+ if (!fis_origin) { -+ for (i = 0; i < numslots; i++) { -+ if (!strncmp(buf[i].name, "RedBoot", 8)) { -+ fis_origin = (buf[i].flash_base & (master->size << 1) - 1); -+ } -+ } -+ } -+ - for (i = 0; i < numslots; i++) { - struct fis_list *new_fl, **prev; - -@@ -202,9 +210,8 @@ static int parse_redboot_partitions(stru - new_fl->img = &buf[i]; - if (fis_origin) { - buf[i].flash_base -= fis_origin; -- } else { -- buf[i].flash_base &= master->size-1; - } -+ buf[i].flash_base &= (master->size << 1) - 1; - - /* I'm sure the JFFS2 code has done me permanent damage. - * I now think the following is _normal_ diff --git a/target/linux/brcm63xx/patches-2.6.38/041-bcm963xx_real_rootfs_length.patch b/target/linux/brcm63xx/patches-2.6.38/041-bcm963xx_real_rootfs_length.patch deleted file mode 100644 index dccd36f4a..000000000 --- a/target/linux/brcm63xx/patches-2.6.38/041-bcm963xx_real_rootfs_length.patch +++ /dev/null @@ -1,45 +0,0 @@ ---- a/arch/mips/include/asm/mach-bcm63xx/bcm963xx_tag.h -+++ b/arch/mips/include/asm/mach-bcm63xx/bcm963xx_tag.h -@@ -86,8 +86,10 @@ struct bcm_tag { - char rootfs_crc[CRC_LEN]; - /* 224-227: CRC32 of kernel partition */ - char kernel_crc[CRC_LEN]; -- /* 228-235: Unused at present */ -- char reserved1[8]; -+ /* 228-231: Image sequence number */ -+ char image_sequence[4]; -+ /* 222-235: Openwrt: real rootfs length */ -+ char real_rootfs_length[4]; - /* 236-239: CRC32 of header excluding tagVersion */ - char header_crc[CRC_LEN]; - /* 240-255: Unused at present */ ---- a/drivers/mtd/maps/bcm963xx-flash.c -+++ b/drivers/mtd/maps/bcm963xx-flash.c -@@ -64,7 +64,7 @@ static int parse_cfe_partitions(struct m - int ret; - size_t retlen; - unsigned int rootfsaddr, kerneladdr, spareaddr; -- unsigned int rootfslen, kernellen, sparelen, totallen; -+ unsigned int rootfslen, kernellen, sparelen; - int namelen = 0; - int i; - char *boardid; -@@ -85,7 +85,7 @@ static int parse_cfe_partitions(struct m - - sscanf(buf->kernel_address, "%u", &kerneladdr); - sscanf(buf->kernel_length, "%u", &kernellen); -- sscanf(buf->total_length, "%u", &totallen); -+ rootfslen = *(uint32_t *)(&(buf->real_rootfs_length)); - tagversion = &(buf->tag_version[0]); - boardid = &(buf->board_id[0]); - -@@ -94,7 +94,8 @@ static int parse_cfe_partitions(struct m - - kerneladdr = kerneladdr - BCM63XX_EXTENDED_SIZE; - rootfsaddr = kerneladdr + kernellen; -- spareaddr = roundup(totallen, master->erasesize) + master->erasesize; -+ rootfslen = roundup(rootfslen, master->erasesize); -+ spareaddr = rootfsaddr + rootfslen; - sparelen = master->size - spareaddr - master->erasesize; - rootfslen = spareaddr - rootfsaddr; - diff --git a/target/linux/brcm63xx/patches-2.6.38/070_bcm63xx_enet_vlan_incoming_fixed.patch b/target/linux/brcm63xx/patches-2.6.38/070_bcm63xx_enet_vlan_incoming_fixed.patch deleted file mode 100644 index 8211e293b..000000000 --- a/target/linux/brcm63xx/patches-2.6.38/070_bcm63xx_enet_vlan_incoming_fixed.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- a/drivers/net/bcm63xx_enet.c -+++ b/drivers/net/bcm63xx_enet.c -@@ -1515,7 +1515,7 @@ static int compute_hw_mtu(struct bcm_ene - actual_mtu = mtu; - - /* add ethernet header + vlan tag size */ -- actual_mtu += VLAN_ETH_HLEN; -+ actual_mtu += VLAN_ETH_HLEN + VLAN_HLEN; - - if (actual_mtu < 64 || actual_mtu > BCMENET_MAX_MTU) - return -EINVAL; diff --git a/target/linux/brcm63xx/patches-2.6.38/100-reset_buttons.patch b/target/linux/brcm63xx/patches-2.6.38/100-reset_buttons.patch deleted file mode 100644 index 786c18b77..000000000 --- a/target/linux/brcm63xx/patches-2.6.38/100-reset_buttons.patch +++ /dev/null @@ -1,98 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -15,6 +15,8 @@ - #include <linux/mtd/partitions.h> - #include <linux/mtd/physmap.h> - #include <linux/ssb/ssb.h> -+#include <linux/gpio_buttons.h> -+#include <linux/input.h> - #include <asm/addrspace.h> - #include <bcm63xx_board.h> - #include <bcm63xx_cpu.h> -@@ -296,6 +298,16 @@ static struct board_info __initdata boar - .active_low = 1, - }, - }, -+ .buttons = { -+ { -+ .desc = "reset", -+ .gpio = 33, -+ .active_low = 1, -+ .type = EV_KEY, -+ .code = KEY_RESTART, -+ .threshold = 3, -+ }, -+ }, - }; - - static struct board_info __initdata board_96348gw = { -@@ -354,6 +366,16 @@ static struct board_info __initdata boar - .active_low = 1, - }, - }, -+ .buttons = { -+ { -+ .desc = "reset", -+ .gpio = 36, -+ .active_low = 1, -+ .type = EV_KEY, -+ .code = KEY_RESTART, -+ .threshold = 3, -+ }, -+ }, - }; - - static struct board_info __initdata board_FAST2404 = { -@@ -838,12 +860,23 @@ static struct platform_device bcm63xx_gp - .dev.platform_data = &bcm63xx_led_data, - }; - -+static struct gpio_buttons_platform_data bcm63xx_gpio_buttons_data = { -+ .poll_interval = 20, -+}; -+ -+static struct platform_device bcm63xx_gpio_buttons_device = { -+ .name = "gpio-buttons", -+ .id = 0, -+ .dev.platform_data = &bcm63xx_gpio_buttons_data, -+}; -+ - /* - * third stage init callback, register all board devices. - */ - int __init board_register_devices(void) - { - u32 val; -+ int button_count = 0; - - if (board.has_uart0) - bcm63xx_uart_register(0); -@@ -888,5 +921,16 @@ int __init board_register_devices(void) - - platform_device_register(&bcm63xx_gpio_leds); - -+ /* count number of BUTTONs defined by this device */ -+ while (button_count < ARRAY_SIZE(board.buttons) && board.buttons[button_count].desc) -+ button_count++; -+ -+ if (button_count) { -+ bcm63xx_gpio_buttons_data.nbuttons = button_count; -+ bcm63xx_gpio_buttons_data.buttons = board.buttons; -+ -+ platform_device_register(&bcm63xx_gpio_buttons_device); -+ } -+ - return 0; - } ---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h -+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h -@@ -57,6 +57,9 @@ struct board_info { - - /* GPIO LEDs */ - struct gpio_led leds[5]; -+ -+ /* Buttons */ -+ struct gpio_button buttons[2]; - }; - - #endif /* ! BOARD_BCM963XX_H_ */ diff --git a/target/linux/brcm63xx/patches-2.6.38/110-gpiodev.patch b/target/linux/brcm63xx/patches-2.6.38/110-gpiodev.patch deleted file mode 100644 index fc99f5345..000000000 --- a/target/linux/brcm63xx/patches-2.6.38/110-gpiodev.patch +++ /dev/null @@ -1,22 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -852,6 +852,10 @@ static struct platform_device mtd_dev = - .num_resources = ARRAY_SIZE(mtd_resources), - }; - -+static struct resource gpiodev_resource = { -+ .start = 0xFFFFFFFF, -+}; -+ - static struct gpio_led_platform_data bcm63xx_led_data; - - static struct platform_device bcm63xx_gpio_leds = { -@@ -916,6 +920,8 @@ int __init board_register_devices(void) - - platform_device_register(&mtd_dev); - -+ platform_device_register_simple("GPIODEV", 0, &gpiodev_resource, 1); -+ - bcm63xx_led_data.num_leds = ARRAY_SIZE(board.leds); - bcm63xx_led_data.leds = board.leds; - diff --git a/target/linux/brcm63xx/patches-2.6.38/141-led_count.patch b/target/linux/brcm63xx/patches-2.6.38/141-led_count.patch deleted file mode 100644 index baf092053..000000000 --- a/target/linux/brcm63xx/patches-2.6.38/141-led_count.patch +++ /dev/null @@ -1,23 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -881,6 +881,7 @@ int __init board_register_devices(void) - { - u32 val; - int button_count = 0; -+ int led_count = 0; - - if (board.has_uart0) - bcm63xx_uart_register(0); -@@ -922,7 +923,11 @@ int __init board_register_devices(void) - - platform_device_register_simple("GPIODEV", 0, &gpiodev_resource, 1); - -- bcm63xx_led_data.num_leds = ARRAY_SIZE(board.leds); -+ /* count number of LEDs defined by this device */ -+ while (led_count < ARRAY_SIZE(board.leds) && board.leds[led_count].name) -+ led_count++; -+ -+ bcm63xx_led_data.num_leds = led_count; - bcm63xx_led_data.leds = board.leds; - - platform_device_register(&bcm63xx_gpio_leds); diff --git a/target/linux/brcm63xx/patches-2.6.38/180-udc_preliminary_support.patch b/target/linux/brcm63xx/patches-2.6.38/180-udc_preliminary_support.patch deleted file mode 100644 index 7b341b719..000000000 --- a/target/linux/brcm63xx/patches-2.6.38/180-udc_preliminary_support.patch +++ /dev/null @@ -1,243 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -29,6 +29,7 @@ - #include <bcm63xx_dev_pcmcia.h> - #include <bcm63xx_dev_usb_ohci.h> - #include <bcm63xx_dev_usb_ehci.h> -+#include <bcm63xx_dev_usb_udc.h> - #include <board_bcm963xx.h> - - #define PFX "board_bcm963xx: " -@@ -400,6 +401,8 @@ static struct board_info __initdata boar - .has_ohci0 = 1, - .has_pccard = 1, - .has_ehci0 = 1, -+ -+ .has_udc0 = 1, - }; - - static struct board_info __initdata board_rta1025w_16 = { -@@ -909,6 +912,9 @@ int __init board_register_devices(void) - if (board.has_dsp) - bcm63xx_dsp_register(&board.dsp); - -+ if (board.has_udc0) -+ bcm63xx_udc_register(); -+ - /* read base address of boot chip select (0) */ - if (BCMCPU_IS_6345()) - val = 0x1fc00000; ---- /dev/null -+++ b/arch/mips/bcm63xx/dev-usb-udc.c -@@ -0,0 +1,58 @@ -+/* -+ * Copyright (C) 2009 Henk Vergonet <Henk.Vergonet@gmail.com> -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. -+ */ -+#include <linux/init.h> -+#include <linux/kernel.h> -+#include <linux/platform_device.h> -+#include <bcm63xx_cpu.h> -+ -+static struct resource udc_resources[] = { -+ { -+ .start = -1, /* filled at runtime */ -+ .end = -1, /* filled at runtime */ -+ .flags = IORESOURCE_MEM, -+ }, -+ { -+ .start = -1, /* filled at runtime */ -+ .flags = IORESOURCE_IRQ, -+ }, -+}; -+ -+static u64 udc_dmamask = ~(u32)0; -+ -+static struct platform_device bcm63xx_udc_device = { -+ .name = "bcm63xx-udc", -+ .id = 0, -+ .num_resources = ARRAY_SIZE(udc_resources), -+ .resource = udc_resources, -+ .dev = { -+ .dma_mask = &udc_dmamask, -+ .coherent_dma_mask = 0xffffffff, -+ }, -+}; -+ -+int __init bcm63xx_udc_register(void) -+{ -+ if (!BCMCPU_IS_6338() && !BCMCPU_IS_6345() && !BCMCPU_IS_6348()) -+ return 0; -+ -+ udc_resources[0].start = bcm63xx_regset_address(RSET_UDC0); -+ udc_resources[0].end = udc_resources[0].start; -+ udc_resources[0].end += RSET_UDC_SIZE - 1; -+ udc_resources[1].start = bcm63xx_get_irq_number(IRQ_UDC0); -+ return platform_device_register(&bcm63xx_udc_device); -+} ---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h -+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h -@@ -127,7 +127,7 @@ enum bcm63xx_regs_set { - #define BCM_6338_UART1_BASE (0xdeadbeef) - #define BCM_6338_GPIO_BASE (0xfffe0400) - #define BCM_6338_SPI_BASE (0xfffe0c00) --#define BCM_6338_UDC0_BASE (0xdeadbeef) -+#define BCM_6338_UDC0_BASE (0xfffe3000) - #define BCM_6338_USBDMA_BASE (0xfffe2400) - #define BCM_6338_OHCI0_BASE (0xdeadbeef) - #define BCM_6338_OHCI_PRIV_BASE (0xfffe3000) -@@ -158,7 +158,7 @@ enum bcm63xx_regs_set { - #define BCM_6345_UART1_BASE (0xdeadbeef) - #define BCM_6345_GPIO_BASE (0xfffe0400) - #define BCM_6345_SPI_BASE (0xdeadbeef) --#define BCM_6345_UDC0_BASE (0xdeadbeef) -+#define BCM_6345_UDC0_BASE (0xfffe2100) - #define BCM_6345_USBDMA_BASE (0xfffe2800) - #define BCM_6345_ENET0_BASE (0xfffe1800) - #define BCM_6345_ENETDMA_BASE (0xfffe2800) -@@ -215,7 +215,7 @@ enum bcm63xx_regs_set { - #define BCM_6358_UART1_BASE (0xfffe0120) - #define BCM_6358_GPIO_BASE (0xfffe0080) - #define BCM_6358_SPI_BASE (0xdeadbeef) --#define BCM_6358_UDC0_BASE (0xfffe0800) -+#define BCM_6358_UDC0_BASE (0xfffe0400) - #define BCM_6358_OHCI0_BASE (0xfffe1400) - #define BCM_6358_OHCI_PRIV_BASE (0xdeadbeef) - #define BCM_6358_USBH_PRIV_BASE (0xfffe1500) -@@ -444,6 +444,7 @@ enum bcm63xx_irq { - IRQ_UART0, - IRQ_UART1, - IRQ_DSL, -+ IRQ_UDC0, - IRQ_ENET0, - IRQ_ENET1, - IRQ_ENET_PHY, -@@ -486,7 +487,7 @@ enum bcm63xx_irq { - #define BCM_6345_UART0_IRQ (IRQ_INTERNAL_BASE + 2) - #define BCM_6345_DSL_IRQ (IRQ_INTERNAL_BASE + 3) - #define BCM_6345_ATM_IRQ (IRQ_INTERNAL_BASE + 4) --#define BCM_6345_USB_IRQ (IRQ_INTERNAL_BASE + 5) -+#define BCM_6345_UDC0_IRQ (IRQ_INTERNAL_BASE + 5) - #define BCM_6345_ENET0_IRQ (IRQ_INTERNAL_BASE + 8) - #define BCM_6345_ENET_PHY_IRQ (IRQ_INTERNAL_BASE + 12) - #define BCM_6345_ENET0_RXDMA_IRQ (IRQ_INTERNAL_BASE + 13 + 1) -@@ -508,10 +509,17 @@ enum bcm63xx_irq { - #define BCM_6348_TIMER_IRQ (IRQ_INTERNAL_BASE + 0) - #define BCM_6348_UART0_IRQ (IRQ_INTERNAL_BASE + 2) - #define BCM_6348_DSL_IRQ (IRQ_INTERNAL_BASE + 4) -+#define BCM_6348_UDC0_IRQ (IRQ_INTERNAL_BASE + 6) - #define BCM_6348_ENET1_IRQ (IRQ_INTERNAL_BASE + 7) - #define BCM_6348_ENET0_IRQ (IRQ_INTERNAL_BASE + 8) - #define BCM_6348_ENET_PHY_IRQ (IRQ_INTERNAL_BASE + 9) - #define BCM_6348_OHCI0_IRQ (IRQ_INTERNAL_BASE + 12) -+#define BCM_6348_USB_CNTL_RX_DMA_IRQ (IRQ_INTERNAL_BASE + 14) -+#define BCM_6348_USB_CNTL_TX_DMA_IRQ (IRQ_INTERNAL_BASE + 15) -+#define BCM_6348_USB_BULK_RX_DMA_IRQ (IRQ_INTERNAL_BASE + 16) -+#define BCM_6348_USB_BULK_TX_DMA_IRQ (IRQ_INTERNAL_BASE + 17) -+#define BCM_6348_USB_ISO_RX_DMA_IRQ (IRQ_INTERNAL_BASE + 18) -+#define BCM_6348_USB_ISO_TX_DMA_IRQ (IRQ_INTERNAL_BASE + 19) - #define BCM_6348_ENET0_RXDMA_IRQ (IRQ_INTERNAL_BASE + 20) - #define BCM_6348_ENET0_TXDMA_IRQ (IRQ_INTERNAL_BASE + 21) - #define BCM_6348_ENET1_RXDMA_IRQ (IRQ_INTERNAL_BASE + 22) ---- /dev/null -+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_udc.h -@@ -0,0 +1,6 @@ -+#ifndef BCM63XX_DEV_USB_UDC_H_ -+#define BCM63XX_DEV_USB_UDC_H_ -+ -+int bcm63xx_udc_register(void); -+ -+#endif /* BCM63XX_DEV_USB_UDC_H_ */ ---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h -+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h -@@ -47,6 +47,7 @@ struct board_info { - unsigned int has_dsp:1; - unsigned int has_uart0:1; - unsigned int has_uart1:1; -+ unsigned int has_udc0:1; - - /* ethernet config */ - struct bcm63xx_enet_platform_data enet0; ---- a/arch/mips/bcm63xx/Makefile -+++ b/arch/mips/bcm63xx/Makefile -@@ -1,6 +1,6 @@ - obj-y += clk.o cpu.o cs.o gpio.o irq.o prom.o setup.o timer.o \ - dev-dsp.o dev-enet.o dev-pcmcia.o dev-uart.o dev-wdt.o \ -- dev-usb-ohci.o dev-usb-ehci.o -+ dev-usb-ohci.o dev-usb-ehci.o dev-usb-udc.o - obj-$(CONFIG_EARLY_PRINTK) += early_printk.o - - obj-y += boards/ ---- a/arch/mips/bcm63xx/clk.c -+++ b/arch/mips/bcm63xx/clk.c -@@ -141,6 +141,30 @@ static struct clk clk_usbh = { - }; - - /* -+ * USB slave clock -+ */ -+static void usbs_set(struct clk *clk, int enable) -+{ -+ u32 mask; -+ -+ switch(bcm63xx_get_cpu_id()) { -+ case BCM6338_CPU_ID: -+ mask = CKCTL_6338_USBS_EN; -+ break; -+ case BCM6348_CPU_ID: -+ mask = CKCTL_6348_USBS_EN; -+ break; -+ default: -+ return; -+ } -+ bcm_hwclock_set(mask, enable); -+} -+ -+static struct clk clk_usbs = { -+ .set = usbs_set, -+}; -+ -+/* - * SPI clock - */ - static void spi_set(struct clk *clk, int enable) -@@ -208,6 +232,8 @@ struct clk *clk_get(struct device *dev, - return &clk_ephy; - if (!strcmp(id, "usbh")) - return &clk_usbh; -+ if (!strcmp(id, "usbs")) -+ return &clk_usbs; - if (!strcmp(id, "spi")) - return &clk_spi; - if (!strcmp(id, "periph")) ---- a/arch/mips/bcm63xx/Kconfig -+++ b/arch/mips/bcm63xx/Kconfig -@@ -7,6 +7,7 @@ config BCM63XX_CPU_6338 - select USB_ARCH_HAS_OHCI - select USB_OHCI_BIG_ENDIAN_DESC - select USB_OHCI_BIG_ENDIAN_MMIO -+ select USB_ARCH_HAS_UDC - - config BCM63XX_CPU_6345 - bool "support 6345 CPU" -@@ -19,6 +20,7 @@ config BCM63XX_CPU_6348 - select USB_ARCH_HAS_OHCI - select USB_OHCI_BIG_ENDIAN_DESC - select USB_OHCI_BIG_ENDIAN_MMIO -+ select USB_ARCH_HAS_UDC - - config BCM63XX_CPU_6358 - bool "support 6358 CPU" diff --git a/target/linux/brcm63xx/patches-2.6.38/200-extended-platform-devices.patch b/target/linux/brcm63xx/patches-2.6.38/200-extended-platform-devices.patch deleted file mode 100644 index db2c22f47..000000000 --- a/target/linux/brcm63xx/patches-2.6.38/200-extended-platform-devices.patch +++ /dev/null @@ -1,25 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -915,6 +915,9 @@ int __init board_register_devices(void) - if (board.has_udc0) - bcm63xx_udc_register(); - -+ if (board.num_devs) -+ platform_add_devices(board.devs, board.num_devs); -+ - /* read base address of boot chip select (0) */ - if (BCMCPU_IS_6345()) - val = 0x1fc00000; ---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h -+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h -@@ -61,6 +61,10 @@ struct board_info { - - /* Buttons */ - struct gpio_button buttons[2]; -+ -+ /* Additional platform devices */ -+ struct platform_device **devs; -+ unsigned int num_devs; - }; - - #endif /* ! BOARD_BCM963XX_H_ */ diff --git a/target/linux/brcm63xx/patches-2.6.38/200-spi-board-info.patch b/target/linux/brcm63xx/patches-2.6.38/200-spi-board-info.patch deleted file mode 100644 index 761ac9605..000000000 --- a/target/linux/brcm63xx/patches-2.6.38/200-spi-board-info.patch +++ /dev/null @@ -1,25 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -918,6 +918,9 @@ int __init board_register_devices(void) - if (board.num_devs) - platform_add_devices(board.devs, board.num_devs); - -+ if (board.num_spis) -+ spi_register_board_info(board.spis, board.num_spis); -+ - /* read base address of boot chip select (0) */ - if (BCMCPU_IS_6345()) - val = 0x1fc00000; ---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h -+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h -@@ -65,6 +65,10 @@ struct board_info { - /* Additional platform devices */ - struct platform_device **devs; - unsigned int num_devs; -+ -+ /* Additional platform devices */ -+ struct spi_board_info *spis; -+ unsigned int num_spis; - }; - - #endif /* ! BOARD_BCM963XX_H_ */ diff --git a/target/linux/brcm63xx/patches-2.6.38/210-no_ehci_over_current_check.patch b/target/linux/brcm63xx/patches-2.6.38/210-no_ehci_over_current_check.patch deleted file mode 100644 index 513ff999a..000000000 --- a/target/linux/brcm63xx/patches-2.6.38/210-no_ehci_over_current_check.patch +++ /dev/null @@ -1,16 +0,0 @@ ---- a/drivers/usb/host/ehci-hub.c -+++ b/drivers/usb/host/ehci-hub.c -@@ -882,11 +882,13 @@ static int ehci_hub_control ( - * power switching; they're allowed to just limit the - * current. khubd will turn the power back on. - */ -+#ifndef CONFIG_BCM63XX - if (HCS_PPC (ehci->hcs_params)){ - ehci_writel(ehci, - temp & ~(PORT_RWC_BITS | PORT_POWER), - status_reg); - } -+#endif - } - - /* whoever resumes must GetPortStatus to complete it!! */ diff --git a/target/linux/brcm63xx/patches-2.6.38/220-wl_exports.patch b/target/linux/brcm63xx/patches-2.6.38/220-wl_exports.patch deleted file mode 100644 index 8cd87b8df..000000000 --- a/target/linux/brcm63xx/patches-2.6.38/220-wl_exports.patch +++ /dev/null @@ -1,34 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -39,6 +39,13 @@ static unsigned int mac_addr_used; - static struct board_info board; - - /* -+ * Required export for WL -+ */ -+#define NVRAM_SPACE 0x8000 -+char nvram_buf[NVRAM_SPACE]; -+EXPORT_SYMBOL(nvram_buf); -+ -+/* - * known 6338 boards - */ - #ifdef CONFIG_BCM63XX_CPU_6338 -@@ -747,6 +754,7 @@ void __init board_prom_init(void) - - /* extract nvram data */ - memcpy(&nvram, boot_addr + BCM963XX_NVRAM_OFFSET, sizeof(nvram)); -+ memcpy(&nvram_buf, boot_addr + BCM963XX_NVRAM_OFFSET, NVRAM_SPACE); - - /* check checksum before using data */ - if (nvram.version <= 4) ---- a/arch/mips/mm/cache.c -+++ b/arch/mips/mm/cache.c -@@ -52,6 +52,7 @@ void (*_dma_cache_wback)(unsigned long s - void (*_dma_cache_inv)(unsigned long start, unsigned long size); - - EXPORT_SYMBOL(_dma_cache_wback_inv); -+EXPORT_SYMBOL(_dma_cache_inv); - - #endif /* CONFIG_DMA_NONCOHERENT */ - diff --git a/target/linux/brcm63xx/patches-2.6.38/230-6358-enet1-external-mii-clk.patch b/target/linux/brcm63xx/patches-2.6.38/230-6358-enet1-external-mii-clk.patch deleted file mode 100644 index d859410b7..000000000 --- a/target/linux/brcm63xx/patches-2.6.38/230-6358-enet1-external-mii-clk.patch +++ /dev/null @@ -1,22 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -818,6 +818,8 @@ void __init board_prom_init(void) - if (BCMCPU_IS_6348()) - val |= GPIO_MODE_6348_G3_EXT_MII | - GPIO_MODE_6348_G0_EXT_MII; -+ else if (BCMCPU_IS_6358()) -+ val |= GPIO_MODE_6358_ENET1_MII_CLK_INV; - } - - bcm_gpio_writel(val, GPIO_MODE_REG); ---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h -+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h -@@ -402,6 +402,8 @@ - #define GPIO_MODE_6358_EXTRA_SPI_SS (1 << 7) - #define GPIO_MODE_6358_SERIAL_LED (1 << 10) - #define GPIO_MODE_6358_UTOPIA (1 << 12) -+#define GPIO_MODE_6358_ENET0_MII_CLK_INV (1 << 30) -+#define GPIO_MODE_6358_ENET1_MII_CLK_INV (1 << 31) - - - /************************************************************************* diff --git a/target/linux/brcm63xx/patches-2.6.38/240-spi.patch b/target/linux/brcm63xx/patches-2.6.38/240-spi.patch deleted file mode 100644 index 829fcf020..000000000 --- a/target/linux/brcm63xx/patches-2.6.38/240-spi.patch +++ /dev/null @@ -1,1002 +0,0 @@ ---- a/arch/mips/bcm63xx/cpu.c -+++ b/arch/mips/bcm63xx/cpu.c -@@ -58,6 +58,7 @@ static const unsigned long bcm96338_regs - - static const int bcm96338_irqs[] = { - [IRQ_TIMER] = BCM_6338_TIMER_IRQ, -+ [IRQ_SPI] = BCM_6338_SPI_IRQ, - [IRQ_UART0] = BCM_6338_UART0_IRQ, - [IRQ_DSL] = BCM_6338_DSL_IRQ, - [IRQ_ENET0] = BCM_6338_ENET0_IRQ, -@@ -132,6 +133,7 @@ static const unsigned long bcm96348_regs - - static const int bcm96348_irqs[] = { - [IRQ_TIMER] = BCM_6348_TIMER_IRQ, -+ [IRQ_SPI] = BCM_6348_SPI_IRQ, - [IRQ_UART0] = BCM_6348_UART0_IRQ, - [IRQ_DSL] = BCM_6348_DSL_IRQ, - [IRQ_ENET0] = BCM_6348_ENET0_IRQ, -@@ -175,6 +177,7 @@ static const unsigned long bcm96358_regs - - static const int bcm96358_irqs[] = { - [IRQ_TIMER] = BCM_6358_TIMER_IRQ, -+ [IRQ_SPI] = BCM_6358_SPI_IRQ, - [IRQ_UART0] = BCM_6358_UART0_IRQ, - [IRQ_UART1] = BCM_6358_UART1_IRQ, - [IRQ_DSL] = BCM_6358_DSL_IRQ, ---- /dev/null -+++ b/arch/mips/bcm63xx/dev-spi.c -@@ -0,0 +1,128 @@ -+/* -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file "COPYING" in the main directory of this archive -+ * for more details. -+ * -+ * Copyright (C) 2009 Florian Fainelli <florian@openwrt.org> -+ * Copyright (C) 2010 Tanguy Bouzeloc <tanguy.bouzeloc@efixo.com> -+ */ -+ -+#include <linux/init.h> -+#include <linux/kernel.h> -+#include <linux/platform_device.h> -+ -+#include <bcm63xx_cpu.h> -+#include <bcm63xx_dev_spi.h> -+#include <bcm63xx_regs.h> -+ -+#ifdef BCMCPU_RUNTIME_DETECT -+/* -+ * register offsets -+ */ -+static const unsigned long bcm96338_regs_spi[] = { -+ [SPI_CMD] = SPI_BCM_6338_SPI_CMD, -+ [SPI_INT_STATUS] = SPI_BCM_6338_SPI_INT_STATUS, -+ [SPI_INT_MASK_ST] = SPI_BCM_6338_SPI_MASK_INT_ST, -+ [SPI_INT_MASK] = SPI_BCM_6338_SPI_INT_MASK, -+ [SPI_ST] = SPI_BCM_6338_SPI_ST, -+ [SPI_CLK_CFG] = SPI_BCM_6338_SPI_CLK_CFG, -+ [SPI_FILL_BYTE] = SPI_BCM_6338_SPI_FILL_BYTE, -+ [SPI_MSG_TAIL] = SPI_BCM_6338_SPI_MSG_TAIL, -+ [SPI_RX_TAIL] = SPI_BCM_6338_SPI_RX_TAIL, -+ [SPI_MSG_CTL] = SPI_BCM_6338_SPI_MSG_CTL, -+ [SPI_MSG_DATA] = SPI_BCM_6338_SPI_MSG_DATA, -+ [SPI_RX_DATA] = SPI_BCM_6338_SPI_RX_DATA, -+}; -+ -+static const unsigned long bcm96348_regs_spi[] = { -+ [SPI_CMD] = SPI_BCM_6348_SPI_CMD, -+ [SPI_INT_STATUS] = SPI_BCM_6348_SPI_INT_STATUS, -+ [SPI_INT_MASK_ST] = SPI_BCM_6348_SPI_MASK_INT_ST, -+ [SPI_INT_MASK] = SPI_BCM_6348_SPI_INT_MASK, -+ [SPI_ST] = SPI_BCM_6348_SPI_ST, -+ [SPI_CLK_CFG] = SPI_BCM_6348_SPI_CLK_CFG, -+ [SPI_FILL_BYTE] = SPI_BCM_6348_SPI_FILL_BYTE, -+ [SPI_MSG_TAIL] = SPI_BCM_6348_SPI_MSG_TAIL, -+ [SPI_RX_TAIL] = SPI_BCM_6348_SPI_RX_TAIL, -+ [SPI_MSG_CTL] = SPI_BCM_6348_SPI_MSG_CTL, -+ [SPI_MSG_DATA] = SPI_BCM_6348_SPI_MSG_DATA, -+ [SPI_RX_DATA] = SPI_BCM_6348_SPI_RX_DATA, -+}; -+ -+static const unsigned long bcm96358_regs_spi[] = { -+ [SPI_CMD] = SPI_BCM_6358_SPI_CMD, -+ [SPI_INT_STATUS] = SPI_BCM_6358_SPI_INT_STATUS, -+ [SPI_INT_MASK_ST] = SPI_BCM_6358_SPI_MASK_INT_ST, -+ [SPI_INT_MASK] = SPI_BCM_6358_SPI_INT_MASK, -+ [SPI_ST] = SPI_BCM_6358_SPI_STATUS, -+ [SPI_CLK_CFG] = SPI_BCM_6358_SPI_CLK_CFG, -+ [SPI_FILL_BYTE] = SPI_BCM_6358_SPI_FILL_BYTE, -+ [SPI_MSG_TAIL] = SPI_BCM_6358_SPI_MSG_TAIL, -+ [SPI_RX_TAIL] = SPI_BCM_6358_SPI_RX_TAIL, -+ [SPI_MSG_CTL] = SPI_BCM_6358_MSG_CTL, -+ [SPI_MSG_DATA] = SPI_BCM_6358_SPI_MSG_DATA, -+ [SPI_RX_DATA] = SPI_BCM_6358_SPI_RX_DATA, -+}; -+ -+const unsigned long *bcm63xx_regs_spi; -+EXPORT_SYMBOL(bcm63xx_regs_spi); -+ -+static __init void bcm63xx_spi_regs_init(void) -+{ -+ if (BCMCPU_IS_6338()) -+ bcm63xx_regs_spi = bcm96338_regs_spi; -+ if (BCMCPU_IS_6348()) -+ bcm63xx_regs_spi = bcm96348_regs_spi; -+ if (BCMCPU_IS_6358()) -+ bcm63xx_regs_spi = bcm96358_regs_spi; -+} -+#else -+static __init void bcm63xx_spi_regs_init(void) { } -+#endif -+ -+static struct resource spi_resources[] = { -+ { -+ .start = -1, /* filled at runtime */ -+ .end = -1, /* filled at runtime */ -+ .flags = IORESOURCE_MEM, -+ }, -+ { -+ .start = -1, /* filled at runtime */ -+ .flags = IORESOURCE_IRQ, -+ }, -+}; -+ -+static struct bcm63xx_spi_pdata spi_pdata = { -+ .bus_num = 0, -+ .num_chipselect = 8, -+ .speed_hz = 50000000, /* Fclk */ -+}; -+ -+static struct platform_device bcm63xx_spi_device = { -+ .name = "bcm63xx-spi", -+ .id = 0, -+ .num_resources = ARRAY_SIZE(spi_resources), -+ .resource = spi_resources, -+ .dev = { -+ .platform_data = &spi_pdata, -+ }, -+}; -+ -+int __init bcm63xx_spi_register(void) -+{ -+ spi_resources[0].start = bcm63xx_regset_address(RSET_SPI); -+ spi_resources[0].end = spi_resources[0].start; -+ spi_resources[0].end += RSET_SPI_SIZE - 1; -+ spi_resources[1].start = bcm63xx_get_irq_number(IRQ_SPI); -+ -+ /* Fill in platform data */ -+ if (BCMCPU_IS_6338() || BCMCPU_IS_6348()) -+ spi_pdata.fifo_size = SPI_BCM_6338_SPI_MSG_DATA_SIZE; -+ -+ if (BCMCPU_IS_6358()) -+ spi_pdata.fifo_size = SPI_BCM_6358_SPI_MSG_DATA_SIZE; -+ -+ bcm63xx_spi_regs_init(); -+ -+ return platform_device_register(&bcm63xx_spi_device); -+} ---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h -+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h -@@ -109,6 +109,7 @@ enum bcm63xx_regs_set { - #define RSET_WDT_SIZE 12 - #define RSET_ENET_SIZE 2048 - #define RSET_ENETDMA_SIZE 2048 -+#define RSET_SPI_SIZE 256 - #define RSET_UART_SIZE 24 - #define RSET_UDC_SIZE 256 - #define RSET_OHCI_SIZE 256 -@@ -214,7 +215,7 @@ enum bcm63xx_regs_set { - #define BCM_6358_UART0_BASE (0xfffe0100) - #define BCM_6358_UART1_BASE (0xfffe0120) - #define BCM_6358_GPIO_BASE (0xfffe0080) --#define BCM_6358_SPI_BASE (0xdeadbeef) -+#define BCM_6358_SPI_BASE (0xfffe0800) - #define BCM_6358_UDC0_BASE (0xfffe0400) - #define BCM_6358_OHCI0_BASE (0xfffe1400) - #define BCM_6358_OHCI_PRIV_BASE (0xdeadbeef) -@@ -441,6 +442,7 @@ static inline unsigned long bcm63xx_regs - */ - enum bcm63xx_irq { - IRQ_TIMER = 0, -+ IRQ_SPI, - IRQ_UART0, - IRQ_UART1, - IRQ_DSL, -@@ -507,6 +509,7 @@ enum bcm63xx_irq { - * 6348 irqs - */ - #define BCM_6348_TIMER_IRQ (IRQ_INTERNAL_BASE + 0) -+#define BCM_6348_SPI_IRQ (IRQ_INTERNAL_BASE + 1) - #define BCM_6348_UART0_IRQ (IRQ_INTERNAL_BASE + 2) - #define BCM_6348_DSL_IRQ (IRQ_INTERNAL_BASE + 4) - #define BCM_6348_UDC0_IRQ (IRQ_INTERNAL_BASE + 6) -@@ -531,6 +534,7 @@ enum bcm63xx_irq { - * 6358 irqs - */ - #define BCM_6358_TIMER_IRQ (IRQ_INTERNAL_BASE + 0) -+#define BCM_6358_SPI_IRQ (IRQ_INTERNAL_BASE + 1) - #define BCM_6358_UART0_IRQ (IRQ_INTERNAL_BASE + 2) - #define BCM_6358_UART1_IRQ (IRQ_INTERNAL_BASE + 3) - #define BCM_6358_OHCI0_IRQ (IRQ_INTERNAL_BASE + 5) ---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h -+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h -@@ -771,4 +771,116 @@ - #define DMIPSPLLCFG_N2_SHIFT 29 - #define DMIPSPLLCFG_N2_MASK (0x7 << DMIPSPLLCFG_N2_SHIFT) - -+/************************************************************************* -+ * _REG relative to RSET_SPI -+ *************************************************************************/ -+ -+/* BCM 6338 SPI core */ -+#define SPI_BCM_6338_SPI_CMD 0x00 /* 16-bits register */ -+#define SPI_BCM_6338_SPI_INT_STATUS 0x02 -+#define SPI_BCM_6338_SPI_MASK_INT_ST 0x03 -+#define SPI_BCM_6338_SPI_INT_MASK 0x04 -+#define SPI_BCM_6338_SPI_ST 0x05 -+#define SPI_BCM_6338_SPI_CLK_CFG 0x06 -+#define SPI_BCM_6338_SPI_FILL_BYTE 0x07 -+#define SPI_BCM_6338_SPI_MSG_TAIL 0x09 -+#define SPI_BCM_6338_SPI_RX_TAIL 0x0b -+#define SPI_BCM_6338_SPI_MSG_CTL 0x40 -+#define SPI_BCM_6338_SPI_MSG_DATA 0x41 -+#define SPI_BCM_6338_SPI_MSG_DATA_SIZE 0x3f -+#define SPI_BCM_6338_SPI_RX_DATA 0x80 -+#define SPI_BCM_6338_SPI_RX_DATA_SIZE 0x3f -+ -+/* BCM 6348 SPI core */ -+#define SPI_BCM_6348_SPI_MASK_INT_ST 0x00 -+#define SPI_BCM_6348_SPI_INT_STATUS 0x01 -+#define SPI_BCM_6348_SPI_CMD 0x02 /* 16-bits register */ -+#define SPI_BCM_6348_SPI_FILL_BYTE 0x04 -+#define SPI_BCM_6348_SPI_CLK_CFG 0x05 -+#define SPI_BCM_6348_SPI_ST 0x06 -+#define SPI_BCM_6348_SPI_INT_MASK 0x07 -+#define SPI_BCM_6348_SPI_RX_TAIL 0x08 -+#define SPI_BCM_6348_SPI_MSG_TAIL 0x10 -+#define SPI_BCM_6348_SPI_MSG_DATA 0x40 -+#define SPI_BCM_6348_SPI_MSG_CTL 0x42 -+#define SPI_BCM_6348_SPI_MSG_DATA_SIZE 0x3f -+#define SPI_BCM_6348_SPI_RX_DATA 0x80 -+#define SPI_BCM_6348_SPI_RX_DATA_SIZE 0x3f -+ -+/* BCM 6358 SPI core */ -+#define SPI_BCM_6358_MSG_CTL 0x00 /* 16-bits register */ -+ -+#define SPI_BCM_6358_SPI_MSG_DATA 0x02 -+#define SPI_BCM_6358_SPI_MSG_DATA_SIZE 0x21e -+ -+#define SPI_BCM_6358_SPI_RX_DATA 0x400 -+#define SPI_BCM_6358_SPI_RX_DATA_SIZE 0x220 -+ -+#define SPI_BCM_6358_SPI_CMD 0x700 /* 16-bits register */ -+ -+#define SPI_BCM_6358_SPI_INT_STATUS 0x702 -+#define SPI_BCM_6358_SPI_MASK_INT_ST 0x703 -+ -+#define SPI_BCM_6358_SPI_INT_MASK 0x704 -+ -+#define SPI_BCM_6358_SPI_STATUS 0x705 -+ -+#define SPI_BCM_6358_SPI_CLK_CFG 0x706 -+ -+#define SPI_BCM_6358_SPI_FILL_BYTE 0x707 -+#define SPI_BCM_6358_SPI_MSG_TAIL 0x709 -+#define SPI_BCM_6358_SPI_RX_TAIL 0x70B -+ -+/* Shared SPI definitions */ -+ -+/* Message configuration */ -+#define SPI_FD_RW 0x00 -+#define SPI_HD_W 0x01 -+#define SPI_HD_R 0x02 -+#define SPI_BYTE_CNT_SHIFT 0 -+#define SPI_MSG_TYPE_SHIFT 14 -+ -+/* Command */ -+#define SPI_CMD_NOOP 0x01 -+#define SPI_CMD_SOFT_RESET 0x02 -+#define SPI_CMD_HARD_RESET 0x04 -+#define SPI_CMD_START_IMMEDIATE 0x08 -+#define SPI_CMD_COMMAND_SHIFT 0 -+#define SPI_CMD_COMMAND_MASK 0x000f -+#define SPI_CMD_DEVICE_ID_SHIFT 4 -+#define SPI_CMD_PREPEND_BYTE_CNT_SHIFT 8 -+#define SPI_CMD_ONE_BYTE_SHIFT 11 -+#define SPI_CMD_ONE_WIRE_SHIFT 12 -+#define SPI_DEV_ID_0 0 -+#define SPI_DEV_ID_1 1 -+#define SPI_DEV_ID_2 2 -+#define SPI_DEV_ID_3 3 -+ -+/* Interrupt mask */ -+#define SPI_INTR_CMD_DONE 0x01 -+#define SPI_INTR_RX_OVERFLOW 0x02 -+#define SPI_INTR_TX_UNDERFLOW 0x04 -+#define SPI_INTR_TX_OVERFLOW 0x08 -+#define SPI_INTR_RX_UNDERFLOW 0x10 -+#define SPI_INTR_CLEAR_ALL 0x1f -+ -+/* Status */ -+#define SPI_RX_EMPTY 0x02 -+#define SPI_CMD_BUSY 0x04 -+#define SPI_SERIAL_BUSY 0x08 -+ -+/* Clock configuration */ -+#define SPI_CLK_20MHZ 0x00 -+#define SPI_CLK_0_391MHZ 0x01 -+#define SPI_CLK_0_781MHZ 0x02 /* default */ -+#define SPI_CLK_1_563MHZ 0x03 -+#define SPI_CLK_3_125MHZ 0x04 -+#define SPI_CLK_6_250MHZ 0x05 -+#define SPI_CLK_12_50MHZ 0x06 -+#define SPI_CLK_25MHZ 0x07 -+#define SPI_CLK_MASK 0x07 -+#define SPI_SSOFFTIME_MASK 0x38 -+#define SPI_SSOFFTIME_SHIFT 3 -+#define SPI_BYTE_SWAP 0x80 -+ - #endif /* BCM63XX_REGS_H_ */ ---- /dev/null -+++ b/drivers/spi/bcm63xx_spi.c -@@ -0,0 +1,496 @@ -+/* -+ * Broadcom BCM63xx SPI controller support -+ * -+ * Copyright (C) 2009 Florian Fainelli <florian@openwrt.org> -+ * Copyright (C) 2010 Tanguy Bouzeloc <tanguy.bouzeloc@efixo.com> -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * as published by the Free Software Foundation; either version 2 -+ * of the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the -+ * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, -+ */ -+ -+#include <linux/kernel.h> -+#include <linux/init.h> -+#include <linux/clk.h> -+#include <linux/module.h> -+#include <linux/platform_device.h> -+#include <linux/delay.h> -+#include <linux/interrupt.h> -+#include <linux/spi/spi.h> -+#include <linux/completion.h> -+#include <linux/err.h> -+ -+#include <bcm63xx_dev_spi.h> -+ -+#define PFX KBUILD_MODNAME -+#define DRV_VER "0.1.2" -+ -+struct bcm63xx_spi { -+ spinlock_t lock; -+ int stopping; -+ struct completion done; -+ -+ void __iomem *regs; -+ int irq; -+ -+ /* Platform data */ -+ u32 speed_hz; -+ unsigned fifo_size; -+ -+ /* Data buffers */ -+ const unsigned char *tx_ptr; -+ unsigned char *rx_ptr; -+ -+ /* data iomem */ -+ u8 __iomem *tx_io; -+ const u8 __iomem *rx_io; -+ -+ int remaining_bytes; -+ -+ struct clk *clk; -+ struct platform_device *pdev; -+}; -+ -+static inline u8 bcm_spi_readb(struct bcm63xx_spi *bs, -+ unsigned int offset) -+{ -+ return bcm_readw(bs->regs + bcm63xx_spireg(offset)); -+} -+ -+static inline u16 bcm_spi_readw(struct bcm63xx_spi *bs, -+ unsigned int offset) -+{ -+ return bcm_readw(bs->regs + bcm63xx_spireg(offset)); -+} -+ -+static inline void bcm_spi_writeb(struct bcm63xx_spi *bs, -+ u8 value, unsigned int offset) -+{ -+ bcm_writeb(value, bs->regs + bcm63xx_spireg(offset)); -+} -+ -+static inline void bcm_spi_writew(struct bcm63xx_spi *bs, -+ u16 value, unsigned int offset) -+{ -+ bcm_writew(value, bs->regs + bcm63xx_spireg(offset)); -+} -+ -+static int bcm63xx_spi_setup_transfer(struct spi_device *spi, -+ struct spi_transfer *t) -+{ -+ u8 bits_per_word; -+ u8 clk_cfg; -+ u32 hz; -+ unsigned int div; -+ -+ struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master); -+ -+ bits_per_word = (t) ? t->bits_per_word : spi->bits_per_word; -+ hz = (t) ? t->speed_hz : spi->max_speed_hz; -+ if (bits_per_word != 8) { -+ dev_err(&spi->dev, "%s, unsupported bits_per_word=%d\n", -+ __func__, bits_per_word); -+ return -EINVAL; -+ } -+ -+ if (spi->chip_select > spi->master->num_chipselect) { -+ dev_err(&spi->dev, "%s, unsupported slave %d\n", -+ __func__, spi->chip_select); -+ return -EINVAL; -+ } -+ -+ /* Check clock setting */ -+ div = (bs->speed_hz / hz); -+ switch (div) { -+ case 2: -+ clk_cfg = SPI_CLK_25MHZ; -+ break; -+ case 4: -+ clk_cfg = SPI_CLK_12_50MHZ; -+ break; -+ case 8: -+ clk_cfg = SPI_CLK_6_250MHZ; -+ break; -+ case 16: -+ clk_cfg = SPI_CLK_3_125MHZ; -+ break; -+ case 32: -+ clk_cfg = SPI_CLK_1_563MHZ; -+ break; -+ case 64: -+ clk_cfg = SPI_CLK_0_781MHZ; -+ break; -+ case 128: -+ default: -+ /* Set to slowest mode for compatibility */ -+ clk_cfg = SPI_CLK_0_391MHZ; -+ break; -+ } -+ -+ bcm_spi_writeb(bs, clk_cfg, SPI_CLK_CFG); -+ dev_dbg(&spi->dev, "Setting clock register to %d (hz %d, cmd %02x)\n", -+ div, hz, clk_cfg); -+ -+ return 0; -+} -+ -+/* the spi->mode bits understood by this driver: */ -+#define MODEBITS (SPI_CPOL | SPI_CPHA) -+ -+static int bcm63xx_spi_setup(struct spi_device *spi) -+{ -+ struct bcm63xx_spi *bs; -+ int ret; -+ -+ bs = spi_master_get_devdata(spi->master); -+ -+ if (bs->stopping) -+ return -ESHUTDOWN; -+ -+ if (!spi->bits_per_word) -+ spi->bits_per_word = 8; -+ -+ if (spi->mode & ~MODEBITS) { -+ dev_err(&spi->dev, "%s, unsupported mode bits %x\n", -+ __func__, spi->mode & ~MODEBITS); -+ return -EINVAL; -+ } -+ -+ ret = bcm63xx_spi_setup_transfer(spi, NULL); -+ if (ret < 0) { -+ dev_err(&spi->dev, "setup: unsupported mode bits %x\n", -+ spi->mode & ~MODEBITS); -+ return ret; -+ } -+ -+ dev_dbg(&spi->dev, "%s, mode %d, %u bits/w, %u nsec/bit\n", -+ __func__, spi->mode & MODEBITS, spi->bits_per_word, 0); -+ -+ return 0; -+} -+ -+/* Fill the TX FIFO with as many bytes as possible */ -+static void bcm63xx_spi_fill_tx_fifo(struct bcm63xx_spi *bs) -+{ -+ u8 size; -+ -+ /* Fill the Tx FIFO with as many bytes as possible */ -+ size = bs->remaining_bytes < bs->fifo_size ? bs->remaining_bytes : -+ bs->fifo_size; -+ memcpy_toio(bs->tx_io, bs->tx_ptr, size); -+ bs->remaining_bytes -= size; -+} -+ -+static int bcm63xx_txrx_bufs(struct spi_device *spi, struct spi_transfer *t) -+{ -+ struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master); -+ u16 msg_ctl; -+ u16 cmd; -+ -+ dev_dbg(&spi->dev, "txrx: tx %p, rx %p, len %d\n", -+ t->tx_buf, t->rx_buf, t->len); -+ -+ /* Transmitter is inhibited */ -+ bs->tx_ptr = t->tx_buf; -+ bs->rx_ptr = t->rx_buf; -+ init_completion(&bs->done); -+ -+ if (t->tx_buf) { -+ bs->remaining_bytes = t->len; -+ bcm63xx_spi_fill_tx_fifo(bs); -+ } -+ -+ /* Enable the command done interrupt which -+ * we use to determine completion of a command */ -+ bcm_spi_writeb(bs, SPI_INTR_CMD_DONE, SPI_INT_MASK); -+ -+ /* Fill in the Message control register */ -+ msg_ctl = (t->len << SPI_BYTE_CNT_SHIFT); -+ -+ if (t->rx_buf && t->tx_buf) -+ msg_ctl |= (SPI_FD_RW << SPI_MSG_TYPE_SHIFT); -+ else if (t->rx_buf) -+ msg_ctl |= (SPI_HD_R << SPI_MSG_TYPE_SHIFT); -+ else if (t->tx_buf) -+ msg_ctl |= (SPI_HD_W << SPI_MSG_TYPE_SHIFT); -+ -+ bcm_spi_writew(bs, msg_ctl, SPI_MSG_CTL); -+ -+ /* Issue the transfer */ -+ cmd = SPI_CMD_START_IMMEDIATE; -+ cmd |= (0 << SPI_CMD_PREPEND_BYTE_CNT_SHIFT); -+ cmd |= (spi->chip_select << SPI_CMD_DEVICE_ID_SHIFT); -+ bcm_spi_writew(bs, cmd, SPI_CMD); -+ wait_for_completion(&bs->done); -+ -+ /* Disable the CMD_DONE interrupt */ -+ bcm_spi_writeb(bs, 0, SPI_INT_MASK); -+ -+ return t->len - bs->remaining_bytes; -+} -+ -+static int bcm63xx_transfer(struct spi_device *spi, struct spi_message *m) -+{ -+ struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master); -+ struct spi_transfer *t; -+ int ret = 0; -+ -+ if (unlikely(list_empty(&m->transfers))) -+ return -EINVAL; -+ -+ if (bs->stopping) -+ return -ESHUTDOWN; -+ -+ list_for_each_entry(t, &m->transfers, transfer_list) { -+ ret += bcm63xx_txrx_bufs(spi, t); -+ } -+ -+ m->complete(m->context); -+ -+ return ret; -+} -+ -+/* This driver supports single master mode only. Hence -+ * CMD_DONE is the only interrupt we care about -+ */ -+static irqreturn_t bcm63xx_spi_interrupt(int irq, void *dev_id) -+{ -+ struct spi_master *master = (struct spi_master *)dev_id; -+ struct bcm63xx_spi *bs = spi_master_get_devdata(master); -+ u8 intr; -+ u16 cmd; -+ -+ /* Read interupts and clear them immediately */ -+ intr = bcm_spi_readb(bs, SPI_INT_STATUS); -+ bcm_spi_writeb(bs, SPI_INTR_CLEAR_ALL, SPI_INT_STATUS); -+ bcm_spi_writeb(bs, 0, SPI_INT_MASK); -+ -+ /* A tansfer completed */ -+ if (intr & SPI_INTR_CMD_DONE) { -+ u8 rx_tail; -+ -+ rx_tail = bcm_spi_readb(bs, SPI_RX_TAIL); -+ -+ /* Read out all the data */ -+ if (rx_tail) -+ memcpy_fromio(bs->rx_ptr, bs->rx_io, rx_tail); -+ -+ /* See if there is more data to send */ -+ if (bs->remaining_bytes > 0) { -+ bcm63xx_spi_fill_tx_fifo(bs); -+ -+ /* Start the transfer */ -+ bcm_spi_writew(bs, SPI_HD_W << SPI_MSG_TYPE_SHIFT, -+ SPI_MSG_CTL); -+ cmd = bcm_spi_readw(bs, SPI_CMD); -+ cmd |= SPI_CMD_START_IMMEDIATE; -+ cmd |= (0 << SPI_CMD_PREPEND_BYTE_CNT_SHIFT); -+ bcm_spi_writeb(bs, SPI_INTR_CMD_DONE, SPI_INT_MASK); -+ bcm_spi_writew(bs, cmd, SPI_CMD); -+ } else { -+ complete(&bs->done); -+ } -+ } -+ -+ return IRQ_HANDLED; -+} -+ -+ -+static int __init bcm63xx_spi_probe(struct platform_device *pdev) -+{ -+ struct resource *r; -+ struct device *dev = &pdev->dev; -+ struct bcm63xx_spi_pdata *pdata = pdev->dev.platform_data; -+ int irq; -+ struct spi_master *master; -+ struct clk *clk; -+ struct bcm63xx_spi *bs; -+ int ret; -+ -+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ if (!r) { -+ dev_err(dev, "no iomem\n"); -+ ret = -ENXIO; -+ goto out; -+ } -+ -+ irq = platform_get_irq(pdev, 0); -+ if (irq < 0) { -+ dev_err(dev, "no irq\n"); -+ ret = -ENXIO; -+ goto out; -+ } -+ -+ clk = clk_get(dev, "spi"); -+ if (IS_ERR(clk)) { -+ dev_err(dev, "no clock for device\n"); -+ ret = -ENODEV; -+ goto out; -+ } -+ -+ master = spi_alloc_master(dev, sizeof(*bs)); -+ if (!master) { -+ dev_err(dev, "out of memory\n"); -+ ret = -ENOMEM; -+ goto out_free; -+ } -+ -+ bs = spi_master_get_devdata(master); -+ init_completion(&bs->done); -+ -+ platform_set_drvdata(pdev, master); -+ bs->pdev = pdev; -+ -+ if (!request_mem_region(r->start, r->end - r->start, PFX)) { -+ dev_err(dev, "iomem request failed\n"); -+ ret = -ENXIO; -+ goto out_put_master; -+ } -+ -+ bs->regs = ioremap_nocache(r->start, r->end - r->start); -+ if (!bs->regs) { -+ dev_err(dev, "unable to ioremap regs\n"); -+ ret = -ENOMEM; -+ goto out_put_master; -+ } -+ bs->irq = irq; -+ bs->clk = clk; -+ bs->fifo_size = pdata->fifo_size; -+ -+ ret = request_irq(irq, bcm63xx_spi_interrupt, 0, pdev->name, master); -+ if (ret) { -+ dev_err(dev, "unable to request irq\n"); -+ goto out_unmap; -+ } -+ -+ master->bus_num = pdata->bus_num; -+ master->num_chipselect = pdata->num_chipselect; -+ master->setup = bcm63xx_spi_setup; -+ master->transfer = bcm63xx_transfer; -+ bs->speed_hz = pdata->speed_hz; -+ bs->stopping = 0; -+ bs->tx_io = (u8*)(bs->regs + bcm63xx_spireg(SPI_MSG_DATA)); -+ bs->rx_io = (const u8*)(bs->regs + bcm63xx_spireg(SPI_RX_DATA)); -+ spin_lock_init(&bs->lock); -+ -+ /* Initialize hardware */ -+ clk_enable(bs->clk); -+ bcm_spi_writeb(bs, SPI_INTR_CLEAR_ALL, SPI_INT_STATUS); -+ -+ /* register and we are done */ -+ ret = spi_register_master(master); -+ if (ret) { -+ dev_err(dev, "spi register failed\n"); -+ goto out_reset_hw; -+ } -+ -+ dev_info(dev, "at 0x%08x (irq %d, FIFOs size %d) v%s\n", -+ r->start, irq, bs->fifo_size, DRV_VER); -+ -+ return 0; -+ -+out_reset_hw: -+ clk_disable(clk); -+ free_irq(irq, master); -+out_unmap: -+ iounmap(bs->regs); -+out_put_master: -+ spi_master_put(master); -+out_free: -+ clk_put(clk); -+out: -+ return ret; -+} -+ -+static int __exit bcm63xx_spi_remove(struct platform_device *pdev) -+{ -+ struct spi_master *master = platform_get_drvdata(pdev); -+ struct bcm63xx_spi *bs = spi_master_get_devdata(master); -+ struct resource *r = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ -+ /* reset spi block */ -+ bcm_spi_writeb(bs, 0, SPI_INT_MASK); -+ spin_lock(&bs->lock); -+ bs->stopping = 1; -+ -+ /* HW shutdown */ -+ clk_disable(bs->clk); -+ clk_put(bs->clk); -+ -+ spin_unlock(&bs->lock); -+ -+ free_irq(bs->irq, master); -+ iounmap(bs->regs); -+ release_mem_region(r->start, r->end - r->start); -+ platform_set_drvdata(pdev, 0); -+ spi_unregister_master(master); -+ -+ return 0; -+} -+ -+#ifdef CONFIG_PM -+static int bcm63xx_spi_suspend(struct platform_device *pdev, pm_message_t mesg) -+{ -+ struct spi_master *master = platform_get_drvdata(pdev); -+ struct bcm63xx_spi *bs = spi_master_get_devdata(master); -+ -+ clk_disable(bs->clk); -+ -+ return 0; -+} -+ -+static int bcm63xx_spi_resume(struct platform_device *pdev) -+{ -+ struct spi_master *master = platform_get_drvdata(pdev); -+ struct bcm63xx_spi *bs = spi_master_get_devdata(master); -+ -+ clk_enable(bs->clk); -+ -+ return 0; -+} -+#else -+#define bcm63xx_spi_suspend NULL -+#define bcm63xx_spi_resume NULL -+#endif -+ -+static struct platform_driver bcm63xx_spi_driver = { -+ .driver = { -+ .name = "bcm63xx-spi", -+ .owner = THIS_MODULE, -+ }, -+ .probe = bcm63xx_spi_probe, -+ .remove = __exit_p(bcm63xx_spi_remove), -+ .suspend = bcm63xx_spi_suspend, -+ .resume = bcm63xx_spi_resume, -+}; -+ -+ -+static int __init bcm63xx_spi_init(void) -+{ -+ return platform_driver_register(&bcm63xx_spi_driver); -+} -+ -+static void __exit bcm63xx_spi_exit(void) -+{ -+ platform_driver_unregister(&bcm63xx_spi_driver); -+} -+ -+module_init(bcm63xx_spi_init); -+module_exit(bcm63xx_spi_exit); -+ -+MODULE_ALIAS("platform:bcm63xx_spi"); -+MODULE_AUTHOR("Florian Fainelli <florian@openwrt.org>"); -+MODULE_AUTHOR("Tanguy Bouzeloc <tanguy.bouzeloc@efixo.com>"); -+MODULE_DESCRIPTION("Broadcom BCM63xx SPI Controller driver"); -+MODULE_LICENSE("GPL"); -+MODULE_VERSION(DRV_VER); ---- a/drivers/spi/Kconfig -+++ b/drivers/spi/Kconfig -@@ -68,6 +68,12 @@ config SPI_ATMEL - This selects a driver for the Atmel SPI Controller, present on - many AT32 (AVR32) and AT91 (ARM) chips. - -+config SPI_BCM63XX -+ tristate "Broadcom BCM63xx SPI controller" -+ depends on BCM63XX -+ help -+ This is the SPI controller master driver for Broadcom BCM63xx SoC. -+ - config SPI_BFIN - tristate "SPI controller driver for ADI Blackfin5xx" - depends on BLACKFIN ---- a/drivers/spi/Makefile -+++ b/drivers/spi/Makefile -@@ -51,6 +51,7 @@ obj-$(CONFIG_SPI_SH_SCI) += spi_sh_sci. - obj-$(CONFIG_SPI_SH_MSIOF) += spi_sh_msiof.o - obj-$(CONFIG_SPI_STMP3XXX) += spi_stmp.o - obj-$(CONFIG_SPI_NUC900) += spi_nuc900.o -+obj-$(CONFIG_SPI_BCM63XX) += bcm63xx_spi.o - - # special build for s3c24xx spi driver with fiq support - spi_s3c24xx_hw-y := spi_s3c24xx.o ---- /dev/null -+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_spi.h -@@ -0,0 +1,126 @@ -+#ifndef BCM63XX_DEV_SPI_H -+#define BCM63XX_DEV_SPI_H -+ -+#include <linux/types.h> -+#include <bcm63xx_io.h> -+#include <bcm63xx_regs.h> -+ -+int __init bcm63xx_spi_register(void); -+ -+struct bcm63xx_spi_pdata { -+ unsigned int fifo_size; -+ int bus_num; -+ int num_chipselect; -+ u32 speed_hz; -+}; -+ -+enum bcm63xx_regs_spi { -+ SPI_CMD, -+ SPI_INT_STATUS, -+ SPI_INT_MASK_ST, -+ SPI_INT_MASK, -+ SPI_ST, -+ SPI_CLK_CFG, -+ SPI_FILL_BYTE, -+ SPI_MSG_TAIL, -+ SPI_RX_TAIL, -+ SPI_MSG_CTL, -+ SPI_MSG_DATA, -+ SPI_RX_DATA, -+}; -+ -+static inline unsigned long bcm63xx_spireg(enum bcm63xx_regs_spi reg) -+{ -+#ifdef BCMCPU_RUNTIME_DETECT -+ extern const unsigned long *bcm63xx_regs_spi; -+ return bcm63xx_regs_spi[reg]; -+#else -+#ifdef CONFIG_BCM63XX_CPU_6338 -+switch (reg) { -+ case SPI_CMD: -+ return SPI_BCM_6338_SPI_CMD; -+ case SPI_INT_STATUS: -+ return SPI_BCM_6338_SPI_INT_STATUS; -+ case SPI_INT_MASK_ST: -+ return SPI_BCM_6338_SPI_MASK_INT_ST; -+ case SPI_INT_MASK: -+ return SPI_BCM_6338_SPI_INT_MASK; -+ case SPI_ST: -+ return SPI_BCM_6338_SPI_ST; -+ case SPI_CLK_CFG: -+ return SPI_BCM_6338_SPI_CLK_CFG; -+ case SPI_FILL_BYTE: -+ return SPI_BCM_6338_SPI_FILL_BYTE; -+ case SPI_MSG_TAIL: -+ return SPI_BCM_6338_SPI_MSG_TAIL; -+ case SPI_RX_TAIL: -+ return SPI_BCM_6338_SPI_RX_TAIL; -+ case SPI_MSG_CTL: -+ return SPI_BCM_6338_SPI_MSG_CTL; -+ case SPI_MSG_DATA: -+ return SPI_BCM_6338_SPI_MSG_DATA; -+ case SPI_RX_DATA: -+ return SPI_BCM_6338_SPI_RX_DATA; -+} -+#endif -+#ifdef CONFIG_BCM63XX_CPU_6348 -+switch (reg) { -+ case SPI_CMD: -+ return SPI_BCM_6348_SPI_CMD; -+ case SPI_INT_MASK_ST: -+ return SPI_BCM_6348_SPI_MASK_INT_ST; -+ case SPI_INT_MASK: -+ return SPI_BCM_6348_SPI_INT_MASK; -+ case SPI_INT_STATUS: -+ return SPI_BCM_6348_SPI_INT_STATUS; -+ case SPI_ST: -+ return SPI_BCM_6348_SPI_ST; -+ case SPI_CLK_CFG: -+ return SPI_BCM_6348_SPI_CLK_CFG; -+ case SPI_FILL_BYTE: -+ return SPI_BCM_6348_SPI_FILL_BYTE; -+ case SPI_MSG_TAIL: -+ return SPI_BCM_6348_SPI_MSG_TAIL; -+ case SPI_RX_TAIL: -+ return SPI_BCM_6348_SPI_RX_TAIL; -+ case SPI_MSG_CTL: -+ return SPI_BCM_6348_SPI_MSG_CTL; -+ case SPI_MSG_DATA: -+ return SPI_BCM_6348_SPI_MSG_DATA; -+ case SPI_RX_DATA: -+ return SPI_BCM_6348_SPI_RX_DATA; -+} -+#endif -+#ifdef CONFIG_BCM63XX_CPU_6358 -+switch (reg) { -+ case SPI_CMD: -+ return SPI_BCM_6358_SPI_CMD; -+ case SPI_INT_STATUS: -+ return SPI_BCM_6358_SPI_INT_STATUS; -+ case SPI_INT_MASK_ST: -+ return SPI_BCM_6358_SPI_MASK_INT_ST; -+ case SPI_INT_MASK: -+ return SPI_BCM_6358_SPI_INT_MASK; -+ case SPI_ST: -+ return SPI_BCM_6358_SPI_STATUS; -+ case SPI_CLK_CFG: -+ return SPI_BCM_6358_SPI_CLK_CFG; -+ case SPI_FILL_BYTE: -+ return SPI_BCM_6358_SPI_FILL_BYTE; -+ case SPI_MSG_TAIL: -+ return SPI_BCM_6358_SPI_MSG_TAIL; -+ case SPI_RX_TAIL: -+ return SPI_BCM_6358_SPI_RX_TAIL; -+ case SPI_MSG_CTL: -+ return SPI_BCM_6358_MSG_CTL; -+ case SPI_MSG_DATA: -+ return SPI_BCM_6358_SPI_MSG_DATA; -+ case SPI_RX_DATA: -+ return SPI_BCM_6358_SPI_RX_DATA; -+} -+#endif -+#endif -+ return 0; -+} -+ -+#endif /* BCM63XX_DEV_SPI_H */ ---- a/arch/mips/bcm63xx/Makefile -+++ b/arch/mips/bcm63xx/Makefile -@@ -1,6 +1,6 @@ - obj-y += clk.o cpu.o cs.o gpio.o irq.o prom.o setup.o timer.o \ - dev-dsp.o dev-enet.o dev-pcmcia.o dev-uart.o dev-wdt.o \ -- dev-usb-ohci.o dev-usb-ehci.o dev-usb-udc.o -+ dev-usb-ohci.o dev-usb-ehci.o dev-usb-udc.o dev-spi.o - obj-$(CONFIG_EARLY_PRINTK) += early_printk.o - - obj-y += boards/ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -30,6 +30,7 @@ - #include <bcm63xx_dev_usb_ohci.h> - #include <bcm63xx_dev_usb_ehci.h> - #include <bcm63xx_dev_usb_udc.h> -+#include <bcm63xx_dev_spi.h> - #include <board_bcm963xx.h> - - #define PFX "board_bcm963xx: " -@@ -931,6 +932,9 @@ int __init board_register_devices(void) - if (board.num_spis) - spi_register_board_info(board.spis, board.num_spis); - -+ if (!BCMCPU_IS_6345()) -+ bcm63xx_spi_register(); -+ - /* read base address of boot chip select (0) */ - if (BCMCPU_IS_6345()) - val = 0x1fc00000; diff --git a/target/linux/brcm63xx/patches-2.6.38/250-boardid_fixup.patch b/target/linux/brcm63xx/patches-2.6.38/250-boardid_fixup.patch deleted file mode 100644 index 50e8016e3..000000000 --- a/target/linux/brcm63xx/patches-2.6.38/250-boardid_fixup.patch +++ /dev/null @@ -1,58 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -32,9 +32,13 @@ - #include <bcm63xx_dev_usb_udc.h> - #include <bcm63xx_dev_spi.h> - #include <board_bcm963xx.h> -+#include <bcm_tag.h> - - #define PFX "board_bcm963xx: " - -+#define CFE_OFFSET_64K 0x10000 -+#define CFE_OFFSET_128K 0x20000 -+ - static struct bcm963xx_nvram nvram; - static unsigned int mac_addr_used; - static struct board_info board; -@@ -723,6 +727,29 @@ static int board_get_mac_address(u8 *mac - return 0; - } - -+static void __init boardid_fixup(u8 *boot_addr) -+{ -+ struct bcm_tag *tag = (struct bcm_tag *)(boot_addr + CFE_OFFSET_64K); -+ -+ /* check if bcm_tag is at 64k offset */ -+ if (strncmp(nvram.name, tag->boardid, BOARDID_LEN) != 0) { -+ /* else try 128k */ -+ tag = (struct bcm_tag *)(boot_addr + CFE_OFFSET_128K); -+ if (strncmp(nvram.name, tag->boardid, BOARDID_LEN) != 0) { -+ /* No tag found */ -+ printk(KERN_DEBUG "No bcm_tag found!\n"); -+ return; -+ } -+ } -+ /* check if we should override the boardid */ -+ if (tag->information1[0] != '+') -+ return; -+ -+ strncpy(nvram.name, &tag->information1[1], BOARDID_LEN); -+ -+ printk(KERN_INFO "Overriding boardid with '%s'\n", nvram.name); -+} -+ - /* - * early init callback, read nvram data from flash and checksum it - */ -@@ -771,6 +798,11 @@ void __init board_prom_init(void) - return; - } - -+ if (strcmp(cfe_version, "unknown") != 0) { -+ /* cfe present */ -+ boardid_fixup(boot_addr); -+ } -+ - /* find board by name */ - for (i = 0; i < ARRAY_SIZE(bcm963xx_boards); i++) { - if (strncmp(nvram.name, bcm963xx_boards[i]->name, diff --git a/target/linux/brcm63xx/patches-2.6.38/300-alice_gate2_leds.patch b/target/linux/brcm63xx/patches-2.6.38/300-alice_gate2_leds.patch deleted file mode 100644 index f54fab736..000000000 --- a/target/linux/brcm63xx/patches-2.6.38/300-alice_gate2_leds.patch +++ /dev/null @@ -1,113 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -603,6 +603,99 @@ static struct board_info __initdata boar - - .has_ohci0 = 1, - .has_ehci0 = 1, -+ -+ .leds = { -+ /*Each led on alice gate is bi-color */ -+ { -+ .name = "power:red", -+ .gpio = 5, -+ .active_low = 1, -+ }, -+ { -+ .name = "power:green", -+ .gpio = 4, -+ .active_low = 1, -+ .default_trigger = "default-on", -+ }, -+ { -+ .name = "service:red", -+ .gpio = 7, -+ .active_low = 1, -+ }, -+ { -+ .name = "service:green", -+ .gpio = 6, -+ .active_low = 1, -+ }, -+ { -+ .name = "adsl:red", -+ .gpio = 9, -+ .active_low = 1, -+ }, -+ { -+ .name = "adsl:green", -+ .gpio = 10, -+ .active_low = 1, -+ }, -+ { -+ .name = "wifi:red", -+ .gpio = 23, -+ .active_low = 1, -+ }, -+ { -+ .name = "wifi:green", -+ .gpio = 22, -+ .active_low = 1, -+ }, -+ { -+ .name = "internet:red", -+ .gpio = 25, -+ .active_low = 1, -+ }, -+ { -+ .name = "internet:green", -+ .gpio = 24, -+ .active_low = 1, -+ }, -+ { -+ .name = "usr1:red", -+ .gpio = 27, -+ .active_low = 1, -+ }, -+ { -+ .name = "usr1:green", -+ .gpio = 26, -+ .active_low = 1, -+ }, -+ { -+ .name = "usr2:red", -+ .gpio = 30, -+ .active_low = 1, -+ }, -+ { -+ .name = "usr2:green", -+ .gpio = 29, -+ .active_low = 1, -+ }, -+ }, -+ -+ .buttons = { -+ { -+ .desc = "reset", -+ .gpio = 37, -+ .active_low = 1, -+ .type = EV_KEY, -+ .code = KEY_RESTART, -+ .threshold = 3, -+ }, -+ { -+ .desc = "wps", -+ .gpio = 34, -+ .type = EV_KEY, -+ .code = KEY_WPS_BUTTON, -+ .threshold = 3, -+ }, -+ }, - }; - - static struct board_info __initdata board_DWVS0 = { ---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h -+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h -@@ -57,7 +57,7 @@ struct board_info { - struct bcm63xx_dsp_platform_data dsp; - - /* GPIO LEDs */ -- struct gpio_led leds[5]; -+ struct gpio_led leds[14]; - - /* Buttons */ - struct gpio_button buttons[2]; diff --git a/target/linux/brcm63xx/patches-2.6.38/310-96348gw_a_leds.patch b/target/linux/brcm63xx/patches-2.6.38/310-96348gw_a_leds.patch deleted file mode 100644 index 7c5027f87..000000000 --- a/target/linux/brcm63xx/patches-2.6.38/310-96348gw_a_leds.patch +++ /dev/null @@ -1,22 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -475,6 +475,19 @@ static struct board_info __initdata boar - }, - - .has_ohci0 = 1, -+ -+ .leds = { -+ { -+ .name = "adsl", -+ .gpio = 3, -+ .active_low = 1, -+ }, -+ { -+ .name = "usb", -+ .gpio = 0, -+ .active_low = 1, -+ } -+ }, - }; - #endif - diff --git a/target/linux/brcm63xx/patches-2.6.38/440-board-D4PW.patch b/target/linux/brcm63xx/patches-2.6.38/440-board-D4PW.patch deleted file mode 100644 index 07f615993..000000000 --- a/target/linux/brcm63xx/patches-2.6.38/440-board-D4PW.patch +++ /dev/null @@ -1,66 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -489,6 +489,55 @@ static struct board_info __initdata boar - } - }, - }; -+ -+static struct board_info __initdata board_96348_D4PW = { -+ .name = "D-4P-W", -+ .expected_cpu_id = 0x6348, -+ -+ .has_enet1 = 1, -+ .has_pci = 1, -+ .has_uart0 = 1, -+ -+ .enet1 = { -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+ -+ .leds = { -+ { -+ .name = "power:green", -+ .gpio = 0, -+ .active_low = 1, -+ }, -+ { -+ .name = "status", -+ .gpio = 3, -+ .active_low = 1, -+ }, -+ { -+ .name = "internet:green", -+ .gpio = 4, -+ .active_low = 1, -+ }, -+ { -+ .name = "internet:red", -+ .gpio = 5, -+ .active_low = 1, -+ }, -+ }, -+ -+ .buttons = { -+ { -+ .desc = "reset", -+ .gpio = 7, -+ .active_low = 1, -+ .type = EV_KEY, -+ .code = KEY_RESTART, -+ .threshold = 3, -+ }, -+ }, -+}; -+ - #endif - - /* -@@ -753,6 +802,7 @@ static const struct board_info __initdat - &board_DV201AMR, - &board_96348gw_a, - &board_rta1025w_16, -+ &board_96348_D4PW, - #endif - - #ifdef CONFIG_BCM63XX_CPU_6358 diff --git a/target/linux/brcm63xx/patches-2.6.38/441-board-NB4.patch b/target/linux/brcm63xx/patches-2.6.38/441-board-NB4.patch deleted file mode 100644 index 2fb7ff272..000000000 --- a/target/linux/brcm63xx/patches-2.6.38/441-board-NB4.patch +++ /dev/null @@ -1,569 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -17,6 +17,9 @@ - #include <linux/ssb/ssb.h> - #include <linux/gpio_buttons.h> - #include <linux/input.h> -+#include <linux/spi/spi.h> -+#include <linux/spi/spi_gpio.h> -+#include <linux/spi/74x164.h> - #include <asm/addrspace.h> - #include <bcm63xx_board.h> - #include <bcm63xx_cpu.h> -@@ -39,6 +42,12 @@ - #define CFE_OFFSET_64K 0x10000 - #define CFE_OFFSET_128K 0x20000 - -+#define NB4_PID_OFFSET 0xff80 -+#define NB4_74X164_GPIO_BASE 64 -+#define NB4_SPI_GPIO_MOSI 7 -+#define NB4_SPI_GPIO_CLK 6 -+#define NB4_74HC64_GPIO(X) (NB4_74X164_GPIO_BASE + (X)) -+ - static struct bcm963xx_nvram nvram; - static unsigned int mac_addr_used; - static struct board_info board; -@@ -780,6 +789,502 @@ static struct board_info __initdata boar - - .has_ohci0 = 1, - }; -+ -+struct spi_gpio_platform_data nb4_spi_gpio_data = { -+ .sck = NB4_SPI_GPIO_CLK, -+ .mosi = NB4_SPI_GPIO_MOSI, -+ .miso = SPI_GPIO_NO_MISO, -+ .num_chipselect = 1, -+}; -+ -+ -+static struct platform_device nb4_spi_gpio = { -+ .name = "spi_gpio", -+ .id = 1, -+ .dev = { -+ .platform_data = &nb4_spi_gpio_data, -+ }, -+}; -+ -+static struct platform_device * __initdata nb4_devices[] = { -+ &nb4_spi_gpio, -+}; -+ -+const struct gen_74x164_chip_platform_data nb4_74x164_platform_data = { -+ .base = NB4_74X164_GPIO_BASE -+}; -+ -+static struct spi_board_info nb4_spi_devices[] = { -+ { -+ .modalias = "74x164", -+ .max_speed_hz = 781000, -+ .bus_num = 1, -+ .controller_data = (void *) SPI_GPIO_NO_CHIPSELECT, -+ .mode = SPI_MODE_0, -+ .platform_data = &nb4_74x164_platform_data -+ } -+}; -+ -+static struct board_info __initdata board_nb4_ser_r0 = { -+ .name = "NB4-SER-r0", -+ .expected_cpu_id = 0x6358, -+ -+ .has_uart0 = 1, -+ .has_enet0 = 1, -+ .has_enet1 = 1, -+ .has_pci = 1, -+ -+ .enet0 = { -+ .has_phy = 1, -+ .use_internal_phy = 1, -+ }, -+ -+ .enet1 = { -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+ -+ -+ .has_ohci0 = 1, -+ .has_pccard = 1, -+ .has_ehci0 = 1, -+ -+ .has_udc0 = 1, -+ -+ .leds = { -+ { -+ .name = "adsl", -+ .gpio = NB4_74HC64_GPIO(4), -+ .active_low = 1, -+ }, -+ { -+ .name = "traffic", -+ .gpio = 2, -+ .active_low = 1, -+ }, -+ { -+ .name = "tel", -+ .gpio = NB4_74HC64_GPIO(3), -+ .active_low = 1, -+ }, -+ { -+ .name = "tv", -+ .gpio = NB4_74HC64_GPIO(2), -+ .active_low = 1, -+ }, -+ { -+ .name = "wifi", -+ .gpio = 15, -+ .active_low = 1, -+ }, -+ { -+ .name = "alarm", -+ .gpio = NB4_74HC64_GPIO(0), -+ .active_low = 1, -+ }, -+ { -+ .name = "service:red", -+ .gpio = 29, -+ .active_low = 1, -+ }, -+ { -+ .name = "service:green", -+ .gpio = 30, -+ .active_low = 1, -+ }, -+ { -+ .name = "service:blue", -+ .gpio = 4, -+ .active_low = 1, -+ }, -+ }, -+ .buttons = { -+ { -+ .desc = "reset", -+ .gpio = 34, -+ .type = EV_KEY, -+ .code = KEY_RESTART, -+ .threshold = 3, -+ }, -+ { -+ .desc = "wps", -+ .gpio = 37, -+ .type = EV_KEY, -+ .code = KEY_WPS_BUTTON, -+ .threshold = 3, -+ }, -+ }, -+ .devs = nb4_devices, -+ .num_devs = ARRAY_SIZE(nb4_devices), -+ .spis = nb4_spi_devices, -+ .num_spis = ARRAY_SIZE(nb4_spi_devices), -+}; -+ -+static struct board_info __initdata board_nb4_ser_r1 = { -+ .name = "NB4-SER-r1", -+ .expected_cpu_id = 0x6358, -+ -+ .has_uart0 = 1, -+ .has_enet0 = 1, -+ .has_enet1 = 1, -+ .has_pci = 1, -+ -+ .enet0 = { -+ .has_phy = 1, -+ .use_internal_phy = 1, -+ }, -+ -+ .enet1 = { -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+ -+ -+ .has_ohci0 = 1, -+ .has_pccard = 1, -+ .has_ehci0 = 1, -+ -+ .has_udc0 = 1, -+ -+ .leds = { -+ { -+ .name = "adsl", -+ .gpio = NB4_74HC64_GPIO(4), -+ .active_low = 1, -+ }, -+ { -+ .name = "traffic", -+ .gpio = 2, -+ .active_low = 1, -+ }, -+ { -+ .name = "tel", -+ .gpio = NB4_74HC64_GPIO(3), -+ .active_low = 1, -+ }, -+ { -+ .name = "tv", -+ .gpio = NB4_74HC64_GPIO(2), -+ .active_low = 1, -+ }, -+ { -+ .name = "wifi", -+ .gpio = 15, -+ .active_low = 1, -+ }, -+ { -+ .name = "alarm", -+ .gpio = NB4_74HC64_GPIO(0), -+ .active_low = 1, -+ }, -+ { -+ .name = "service:red", -+ .gpio = 29, -+ .active_low = 1, -+ }, -+ { -+ .name = "service:green", -+ .gpio = 30, -+ .active_low = 1, -+ }, -+ { -+ .name = "service:blue", -+ .gpio = 4, -+ .active_low = 1, -+ }, -+ }, -+ .buttons = { -+ { -+ .desc = "reset", -+ .gpio = 34, -+ .type = EV_KEY, -+ .code = KEY_RESTART, -+ .threshold = 3, -+ }, -+ { -+ .desc = "wps", -+ .gpio = 37, -+ .type = EV_KEY, -+ .code = KEY_WPS_BUTTON, -+ .threshold = 3, -+ }, -+ }, -+ .devs = nb4_devices, -+ .num_devs = ARRAY_SIZE(nb4_devices), -+ .spis = nb4_spi_devices, -+ .num_spis = ARRAY_SIZE(nb4_spi_devices), -+}; -+ -+static struct board_info __initdata board_nb4_ser_r2 = { -+ .name = "NB4-SER-r2", -+ .expected_cpu_id = 0x6358, -+ -+ .has_uart0 = 1, -+ .has_enet0 = 1, -+ .has_enet1 = 1, -+ .has_pci = 1, -+ -+ .enet0 = { -+ .has_phy = 1, -+ .use_internal_phy = 1, -+ }, -+ -+ .enet1 = { -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+ -+ -+ .has_ohci0 = 1, -+ .has_pccard = 1, -+ .has_ehci0 = 1, -+ -+ .leds = { -+ { -+ .name = "adsl", -+ .gpio = NB4_74HC64_GPIO(4), -+ .active_low = 1, -+ }, -+ { -+ .name = "traffic", -+ .gpio = 2, -+ .active_low = 1, -+ }, -+ { -+ .name = "tel", -+ .gpio = NB4_74HC64_GPIO(3), -+ .active_low = 1, -+ }, -+ { -+ .name = "tv", -+ .gpio = NB4_74HC64_GPIO(2), -+ .active_low = 1, -+ }, -+ { -+ .name = "wifi", -+ .gpio = 15, -+ .active_low = 1, -+ }, -+ { -+ .name = "alarm", -+ .gpio = NB4_74HC64_GPIO(0), -+ .active_low = 1, -+ }, -+ { -+ .name = "service:red", -+ .gpio = 29, -+ .active_low = 1, -+ }, -+ { -+ .name = "service:green", -+ .gpio = 30, -+ .active_low = 1, -+ }, -+ { -+ .name = "service:blue", -+ .gpio = 4, -+ .active_low = 1, -+ }, -+ }, -+ .buttons = { -+ { -+ .desc = "reset", -+ .gpio = 34, -+ .type = EV_KEY, -+ .code = KEY_RESTART, -+ .threshold = 3, -+ }, -+ { -+ .desc = "wps", -+ .gpio = 37, -+ .type = EV_KEY, -+ .code = KEY_WPS_BUTTON, -+ .threshold = 3, -+ }, -+ }, -+ .devs = nb4_devices, -+ .num_devs = ARRAY_SIZE(nb4_devices), -+ .spis = nb4_spi_devices, -+ .num_spis = ARRAY_SIZE(nb4_spi_devices), -+}; -+ -+static struct board_info __initdata board_nb4_fxc_r1 = { -+ .name = "NB4-FXC-r1", -+ .expected_cpu_id = 0x6358, -+ -+ .has_uart0 = 1, -+ .has_enet0 = 1, -+ .has_enet1 = 1, -+ .has_pci = 1, -+ -+ .enet0 = { -+ .has_phy = 1, -+ .use_internal_phy = 1, -+ }, -+ -+ .enet1 = { -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+ -+ -+ .has_ohci0 = 1, -+ .has_pccard = 1, -+ .has_ehci0 = 1, -+ -+ .has_udc0 = 1, -+ -+ .leds = { -+ { -+ .name = "adsl", -+ .gpio = NB4_74HC64_GPIO(4), -+ .active_low = 1, -+ }, -+ { -+ .name = "traffic", -+ .gpio = 2, -+ }, -+ { -+ .name = "tel", -+ .gpio = NB4_74HC64_GPIO(3), -+ .active_low = 1, -+ }, -+ { -+ .name = "tv", -+ .gpio = NB4_74HC64_GPIO(2), -+ .active_low = 1, -+ }, -+ { -+ .name = "wifi", -+ .gpio = 15, -+ }, -+ { -+ .name = "alarm", -+ .gpio = NB4_74HC64_GPIO(0), -+ .active_low = 1, -+ }, -+ { -+ .name = "service:red", -+ .gpio = 29, -+ }, -+ { -+ .name = "service:green", -+ .gpio = 30, -+ }, -+ { -+ .name = "service:blue", -+ .gpio = 4, -+ }, -+ }, -+ .buttons = { -+ { -+ .desc = "reset", -+ .gpio = 34, -+ .type = EV_KEY, -+ .code = KEY_RESTART, -+ .threshold = 3, -+ }, -+ { -+ .desc = "wps", -+ .gpio = 37, -+ .type = EV_KEY, -+ .code = KEY_WPS_BUTTON, -+ .threshold = 3, -+ }, -+ }, -+ .devs = nb4_devices, -+ .num_devs = ARRAY_SIZE(nb4_devices), -+ .spis = nb4_spi_devices, -+ .num_spis = ARRAY_SIZE(nb4_spi_devices), -+}; -+ -+static struct board_info __initdata board_nb4_fxc_r2 = { -+ .name = "NB4-FXC-r2", -+ .expected_cpu_id = 0x6358, -+ -+ .has_uart0 = 1, -+ .has_enet0 = 1, -+ .has_enet1 = 1, -+ .has_pci = 1, -+ -+ .enet0 = { -+ .has_phy = 1, -+ .use_internal_phy = 1, -+ }, -+ -+ .enet1 = { -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+ -+ -+ .has_ohci0 = 1, -+ .has_pccard = 1, -+ .has_ehci0 = 1, -+ -+ .leds = { -+ { -+ .name = "adsl", -+ .gpio = NB4_74HC64_GPIO(4), -+ .active_low = 1, -+ }, -+ { -+ .name = "traffic", -+ .gpio = 2, -+ }, -+ { -+ .name = "tel", -+ .gpio = NB4_74HC64_GPIO(3), -+ .active_low = 1, -+ }, -+ { -+ .name = "tv", -+ .gpio = NB4_74HC64_GPIO(2), -+ .active_low = 1, -+ }, -+ { -+ .name = "wifi", -+ .gpio = 15, -+ }, -+ { -+ .name = "alarm", -+ .gpio = NB4_74HC64_GPIO(0), -+ .active_low = 1, -+ }, -+ { -+ .name = "service:red", -+ .gpio = 29, -+ }, -+ { -+ .name = "service:green", -+ .gpio = 30, -+ }, -+ { -+ .name = "service:blue", -+ .gpio = 4, -+ }, -+ }, -+ .buttons = { -+ { -+ .desc = "reset", -+ .gpio = 34, -+ .type = EV_KEY, -+ .code = KEY_RESTART, -+ .threshold = 3, -+ }, -+ { -+ .desc = "wps", -+ .gpio = 37, -+ .type = EV_KEY, -+ .code = KEY_WPS_BUTTON, -+ .threshold = 3, -+ }, -+ }, -+ .devs = nb4_devices, -+ .num_devs = ARRAY_SIZE(nb4_devices), -+ .spis = nb4_spi_devices, -+ .num_spis = ARRAY_SIZE(nb4_spi_devices), -+}; - #endif - - /* -@@ -810,9 +1315,30 @@ static const struct board_info __initdat - &board_96358vw2, - &board_AGPFS0, - &board_DWVS0, -+ &board_nb4_ser_r0, -+ &board_nb4_ser_r1, -+ &board_nb4_ser_r2, -+ &board_nb4_fxc_r1, -+ &board_nb4_fxc_r2, - #endif - }; - -+static void __init nb4_nvram_fixup(void) -+{ -+ u8 *boot_addr, *p; -+ u32 val; -+ -+ if (BCMCPU_IS_6358() && (!strcmp(nvram.name, "96358VW"))) { -+ val = bcm_mpi_readl(MPI_CSBASE_REG(0)); -+ val &= MPI_CSBASE_BASE_MASK; -+ boot_addr = (u8 *)KSEG1ADDR(val); -+ /* Extract nb4 PID */ -+ p = boot_addr + NB4_PID_OFFSET; -+ if (!memcmp(p, "NB4-", 4)) -+ memcpy(nvram.name, p, sizeof("NB4-XXX-rX")); -+ } -+} -+ - /* - * Register a sane SPROMv2 to make the on-board - * bcm4318 WLAN work -@@ -959,6 +1485,9 @@ void __init board_prom_init(void) - boardid_fixup(boot_addr); - } - -+ /* Fixup broken nb4 board name */ -+ nb4_nvram_fixup(); -+ - /* find board by name */ - for (i = 0; i < ARRAY_SIZE(bcm963xx_boards); i++) { - if (strncmp(nvram.name, bcm963xx_boards[i]->name, diff --git a/target/linux/brcm63xx/patches-2.6.38/442-board-96338W2_E7T.patch b/target/linux/brcm63xx/patches-2.6.38/442-board-96338W2_E7T.patch deleted file mode 100644 index 66ced55fa..000000000 --- a/target/linux/brcm63xx/patches-2.6.38/442-board-96338W2_E7T.patch +++ /dev/null @@ -1,49 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -146,6 +146,38 @@ static struct board_info __initdata boar - }, - }, - }; -+ -+static struct board_info __initdata board_96338w2_e7t = { -+ .name = "96338W2_E7T", -+ .expected_cpu_id = 0x6338, -+ -+ .has_enet0 = 1, -+ -+ .enet0 = { -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+ -+ .leds = { -+ { -+ .name = "ppp", -+ .gpio = 4, -+ .active_low = 1, -+ }, -+ { -+ .name = "ppp-fail", -+ .gpio = 5, -+ .active_low = 1, -+ }, -+ { -+ .name = "power", -+ .gpio = 0, -+ .active_low = 1, -+ .default_trigger = "default-on", -+ -+ }, -+ }, -+}; - #endif - - /* -@@ -1294,6 +1326,7 @@ static const struct board_info __initdat - #ifdef CONFIG_BCM63XX_CPU_6338 - &board_96338gw, - &board_96338w, -+ &board_96338w2_e7t, - #endif - #ifdef CONFIG_BCM63XX_CPU_6345 - &board_96345gw2, diff --git a/target/linux/brcm63xx/patches-2.6.38/443-board-CPVA642.patch b/target/linux/brcm63xx/patches-2.6.38/443-board-CPVA642.patch deleted file mode 100644 index 0ace02d7b..000000000 --- a/target/linux/brcm63xx/patches-2.6.38/443-board-CPVA642.patch +++ /dev/null @@ -1,109 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -685,6 +685,98 @@ static struct board_info __initdata boar - }, - }; - -+static struct board_info __initdata board_CPVA642 = { -+ .name = "CPVA642", -+ .expected_cpu_id = 0x6358, -+ -+ .has_uart0 = 1, -+ .has_enet1 = 1, -+ .has_pci = 1, -+ -+ .enet1 = { -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+ -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ -+ .leds = { -+ /* bi-color */ -+ { -+ .name = "power:red", -+ .gpio = 14, -+ .active_low = 1, -+ }, -+ { -+ .name = "power:green", -+ .gpio = 11, -+ .active_low = 1, -+ .default_trigger = "default-on", -+ }, -+ { -+ .name = "wifi:red", -+ .gpio = 6, -+ .active_low = 1, -+ }, -+ { -+ .name = "wifi:green", -+ .gpio = 28, -+ .active_low = 0, -+ }, -+ { -+ .name = "link:red", -+ .gpio = 9, -+ .active_low = 1, -+ }, -+ { -+ .name = "link:green", -+ .gpio = 10, -+ .active_low = 1, -+ }, -+ /* green only */ -+ { -+ .name = "ether", -+ .gpio = 1, -+ .active_low = 1, -+ }, -+ { -+ .name = "phone1", -+ .gpio = 4, -+ .active_low = 1, -+ }, -+ { -+ .name = "phone2", -+ .gpio = 2, -+ .active_low = 1, -+ }, -+ { -+ .name = "usb", -+ .gpio = 3, -+ .active_low = 1, -+ }, -+ }, -+ -+ .buttons = { -+ { -+ .desc = "reset", -+ .gpio = 36, -+ .active_low = 1, -+ .type = EV_KEY, -+ .code = KEY_RESTART, -+ .threshold = 3, -+ }, -+ { -+ .desc = "wps", -+ .gpio = 37, -+ .type = EV_KEY, -+ .code = KEY_WPS_BUTTON, -+ .threshold = 3, -+ }, -+ }, -+}; -+ -+ - static struct board_info __initdata board_AGPFS0 = { - .name = "AGPF-S0", - .expected_cpu_id = 0x6358, -@@ -1347,6 +1439,7 @@ static const struct board_info __initdat - &board_96358vw, - &board_96358vw2, - &board_AGPFS0, -+ &board_CPVA642, - &board_DWVS0, - &board_nb4_ser_r0, - &board_nb4_ser_r1, diff --git a/target/linux/brcm63xx/patches-2.6.38/444-board_dsl_274xb_rev_c.patch b/target/linux/brcm63xx/patches-2.6.38/444-board_dsl_274xb_rev_c.patch deleted file mode 100644 index 5bafc77d3..000000000 --- a/target/linux/brcm63xx/patches-2.6.38/444-board_dsl_274xb_rev_c.patch +++ /dev/null @@ -1,70 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -914,6 +914,59 @@ static struct board_info __initdata boar - .has_ohci0 = 1, - }; - -+/* D-Link DSL-274xB revison C2/C3 */ -+static struct board_info __initdata board_dsl_274xb_rev_c = { -+ .name = "AW4139", -+ .expected_cpu_id = 0x6358, -+ -+ .has_uart0 = 1, -+ .has_enet1 = 1, -+ .has_pci = 1, -+ -+ .enet1 = { -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+ -+ .leds = { -+ { -+ .name = "dsl-274xb:green:power", -+ .gpio = 5, -+ .active_low = 1, -+ .default_trigger = "default-on", -+ }, -+ { -+ .name = "dsl-274xb:red:power", -+ .gpio = 4, -+ .active_low = 1, -+ }, -+ { -+ .name = "dsl-274xb:green:adsl", -+ .gpio = 9, -+ .active_low = 1, -+ }, -+ { -+ .name = "dsl-274xb:green:internet", -+ .gpio = 2, -+ }, -+ { -+ .name = "dsl-274xb:red:internet", -+ .gpio = 10, -+ }, -+ }, -+ -+ .buttons = { -+ { -+ .desc = "reset", -+ .gpio = 34, -+ .active_low = 1, -+ .type = EV_KEY, -+ .code = KEY_RESTART, -+ .threshold = 3, -+ }, -+ }, -+}; -+ - struct spi_gpio_platform_data nb4_spi_gpio_data = { - .sck = NB4_SPI_GPIO_CLK, - .mosi = NB4_SPI_GPIO_MOSI, -@@ -1441,6 +1494,7 @@ static const struct board_info __initdat - &board_AGPFS0, - &board_CPVA642, - &board_DWVS0, -+ &board_dsl_274xb_rev_c, - &board_nb4_ser_r0, - &board_nb4_ser_r1, - &board_nb4_ser_r2, diff --git a/target/linux/brcm63xx/patches-2.6.38/445-board_spw500v.patch b/target/linux/brcm63xx/patches-2.6.38/445-board_spw500v.patch deleted file mode 100644 index e2215f2d0..000000000 --- a/target/linux/brcm63xx/patches-2.6.38/445-board_spw500v.patch +++ /dev/null @@ -1,78 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -579,6 +579,67 @@ static struct board_info __initdata boar - }, - }; - -+static struct board_info __initdata board_spw500v = { -+ .name = "SPW500V", -+ .expected_cpu_id = 0x6348, -+ -+ .has_uart0 = 1, -+ .has_enet0 = 1, -+ .has_pci = 1, -+ -+ .enet0 = { -+ .has_phy = 1, -+ .use_internal_phy = 1, -+ }, -+ -+ .has_dsp = 1, -+ .dsp = { -+ .gpio_rst = 6, -+ .gpio_int = 34, -+ .ext_irq = 2, -+ .cs = 2, -+ }, -+ -+ .leds = { -+ { -+ .name = "power:red", -+ .gpio = 1, -+ .active_low = 1, -+ }, -+ { -+ .name = "power:green", -+ .gpio = 0, -+ .active_low = 1, -+ .default_trigger = "default-on", -+ }, -+ { -+ .name = "ppp", -+ .gpio = 3, -+ .active_low = 1, -+ }, -+ { .name = "pstn", -+ .gpio = 28, -+ .active_low = 1, -+ }, -+ { -+ .name = "voip", -+ .gpio = 32, -+ .active_low = 1, -+ }, -+ }, -+ -+ .buttons = { -+ { -+ .desc = "reset", -+ .gpio = 33, -+ .active_low = 1, -+ .type = EV_KEY, -+ .code = KEY_RESTART, -+ .threshold = 3, -+ }, -+ }, -+}; -+ - #endif - - /* -@@ -1486,6 +1547,7 @@ static const struct board_info __initdat - &board_96348gw_a, - &board_rta1025w_16, - &board_96348_D4PW, -+ &board_spw500v, - #endif - - #ifdef CONFIG_BCM63XX_CPU_6358 diff --git a/target/linux/brcm63xx/patches-2.6.38/447-board_gw6200_gw6000.patch b/target/linux/brcm63xx/patches-2.6.38/447-board_gw6200_gw6000.patch deleted file mode 100644 index c06fda942..000000000 --- a/target/linux/brcm63xx/patches-2.6.38/447-board_gw6200_gw6000.patch +++ /dev/null @@ -1,129 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -432,6 +432,117 @@ static struct board_info __initdata boar - }, - }; - -+static struct board_info __initdata board_gw6200 = { -+ .name = "GW6200", -+ .expected_cpu_id = 0x6348, -+ -+ .has_uart0 = 1, -+ .has_enet0 = 1, -+ .has_enet1 = 1, -+ .has_pci = 1, -+ -+ .enet0 = { -+ .has_phy = 1, -+ .use_internal_phy = 1, -+ }, -+ .enet1 = { -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+ -+ .has_ohci0 = 1, -+ -+ .has_dsp = 1, -+ .dsp = { -+ .gpio_rst = 8, /* FIXME: What is real GPIO here? */ -+ .gpio_int = 34, -+ .ext_irq = 2, -+ .cs = 2, -+ }, -+ -+ .leds = { -+ { -+ .name = "line1", -+ .gpio = 4, -+ .active_low = 1, -+ }, -+ { -+ .name = "line2", -+ .gpio = 5, -+ .active_low = 1, -+ }, -+ { -+ .name = "line3", -+ .gpio = 6, -+ .active_low = 1, -+ }, -+ { -+ .name = "tel", -+ .gpio = 7, -+ .active_low = 1, -+ }, -+ { -+ .name = "ethernet", -+ .gpio = 35, -+ .active_low = 1, -+ }, -+ }, -+ .buttons = { -+ { -+ .desc = "reset", -+ .gpio = 36, -+ .active_low = 1, -+ .type = EV_KEY, -+ .code = KEY_RESTART, -+ .threshold = 3, -+ }, -+ }, -+}; -+ -+static struct board_info __initdata board_gw6000 = { -+ .name = "GW6000", -+ .expected_cpu_id = 0x6348, -+ -+ .has_uart0 = 1, -+ .has_enet0 = 1, -+ .has_enet1 = 1, -+ .has_pci = 1, -+ -+ .enet0 = { -+ .has_phy = 1, -+ .use_internal_phy = 1, -+ }, -+ .enet1 = { -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+ -+ .has_ohci0 = 1, -+ -+ .has_dsp = 1, -+ .dsp = { -+ .gpio_rst = 6, -+ .gpio_int = 34, -+ .ext_irq = 2, -+ .cs = 2, -+ }, -+ -+ /* GW6000 has no GPIO-controlled leds */ -+ -+ .buttons = { -+ { -+ .desc = "reset", -+ .gpio = 36, -+ .active_low = 1, -+ .type = EV_KEY, -+ .code = KEY_RESTART, -+ .threshold = 3, -+ }, -+ }, -+}; -+ -+ -+ - static struct board_info __initdata board_FAST2404 = { - .name = "F@ST2404", - .expected_cpu_id = 0x6348, -@@ -1540,6 +1651,8 @@ static const struct board_info __initdat - #ifdef CONFIG_BCM63XX_CPU_6348 - &board_96348r, - &board_96348gw, -+ &board_gw6000, -+ &board_gw6200, - &board_96348gw_10, - &board_96348gw_11, - &board_FAST2404, diff --git a/target/linux/brcm63xx/patches-2.6.38/448-board-MAGIC.patch b/target/linux/brcm63xx/patches-2.6.38/448-board-MAGIC.patch deleted file mode 100644 index 47e7db141..000000000 --- a/target/linux/brcm63xx/patches-2.6.38/448-board-MAGIC.patch +++ /dev/null @@ -1,87 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -751,6 +751,76 @@ static struct board_info __initdata boar - }, - }; - -+static struct board_info __initdata board_96348sv = { -+ .name = "MAGIC", -+ .expected_cpu_id = 0x6348, -+ -+ .has_uart0 = 1, -+ .has_enet0 = 1, -+ .has_enet1 = 1, -+ .has_pci = 1, -+ -+ .enet0 = { -+ .has_phy = 1, -+ .use_internal_phy = 1, -+ }, -+ .enet1 = { -+ /* is has BP_ENET_EXTERNAL_PHY */ -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+ -+ .has_ohci0 = 1, -+ .has_pccard = 1, -+ .has_ehci0 = 1, -+ -+ .has_dsp = 1, -+ .dsp = { -+ .gpio_rst = 25, -+ .gpio_int = 34, -+ .cs = 2, -+ .ext_irq = 2, -+ }, -+ -+ .leds = { -+ { -+ .name = "voip", -+ .gpio = 22, -+ .active_low = 1, -+ }, -+ { -+ .name = "adsl", -+ .gpio = 5, -+ .active_low = 1, -+ }, -+ { -+ .name = "wifi", -+ .gpio = 28, -+ }, -+ { -+ .name = "usb", -+ .gpio = 35, -+ .active_low = 1, -+ }, -+ { -+ .name = "hpna", -+ .gpio = 4, -+ .active_low = 1, -+ }, -+ { -+ .name = "power", -+ .gpio = 0, -+ .active_low = 1, -+ .default_trigger = "default-on", -+ }, -+ { -+ .name = "stop", -+ .gpio = 1, -+ .active_low = 1, -+ }, -+ }, -+}; -+ - #endif - - /* -@@ -1661,6 +1731,7 @@ static const struct board_info __initdat - &board_rta1025w_16, - &board_96348_D4PW, - &board_spw500v, -+ &board_96348sv, - #endif - - #ifdef CONFIG_BCM63XX_CPU_6358 diff --git a/target/linux/brcm63xx/patches-2.6.38/449-board_hw553.patch b/target/linux/brcm63xx/patches-2.6.38/449-board_hw553.patch deleted file mode 100644 index f806ad078..000000000 --- a/target/linux/brcm63xx/patches-2.6.38/449-board_hw553.patch +++ /dev/null @@ -1,90 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -1706,6 +1706,79 @@ static struct board_info __initdata boar - }; - #endif - -+static struct board_info __initdata board_HW553 = { -+ .name = "HW553", -+ .expected_cpu_id = 0x6358, -+ -+ .has_enet0 = 1, -+ .has_enet1 = 1, -+ .has_pci = 1, -+ -+ .enet0 = { -+ .has_phy = 1, -+ .use_internal_phy = 1, -+ }, -+ -+ .enet1 = { -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+ -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ -+ .leds = { -+ /*Each led on HW553 is bi-color (except wifi) */ -+ { -+ .name = "lan:red", -+ .gpio = 34, -+ .active_low = 1, -+ }, -+ { -+ .name = "lan:blue", -+ .gpio = 35, -+ .active_low = 1, -+ }, -+ { -+ .name = "adsl:red", -+ .gpio = 22, -+ .active_low = 1, -+ }, -+ { -+ .name = "adsl:blue", -+ .gpio = 23, -+ .active_low = 1, -+ }, -+ { -+ .name = "power:red", -+ .gpio = 5, -+ .active_low = 1, -+ .default_trigger = "default-on", -+ }, -+ -+ { -+ .name = "power:blue", -+ .gpio = 4, -+ .active_low = 1, -+ }, -+ { -+ .name = "wifi:red", -+ .gpio = 25, -+ .active_low = 1, -+ }, -+ { -+ .name = "internetkey:red", -+ .gpio = 12, -+ .active_low = 1, -+ }, -+ { -+ .name = "internetkey:blue", -+ .gpio = 13, -+ .active_low = 1, -+ }, -+ }, -+}; -+ - /* - * all boards - */ -@@ -1746,6 +1819,7 @@ static const struct board_info __initdat - &board_nb4_ser_r2, - &board_nb4_fxc_r1, - &board_nb4_fxc_r2, -+ &board_HW553, - #endif - }; - diff --git a/target/linux/brcm63xx/patches-2.6.38/450-board_rta1320_16m.patch b/target/linux/brcm63xx/patches-2.6.38/450-board_rta1320_16m.patch deleted file mode 100644 index 537a88bae..000000000 --- a/target/linux/brcm63xx/patches-2.6.38/450-board_rta1320_16m.patch +++ /dev/null @@ -1,54 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -178,6 +178,43 @@ static struct board_info __initdata boar - }, - }, - }; -+ -+static struct board_info __initdata board_rta1320_16m = { -+ .name = "RTA1320_16M", -+ .expected_cpu_id = 0x6338, -+ -+ .has_uart0 = 1, -+ .has_enet0 = 1, -+ -+ .enet0 = { -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+ -+ .leds = { -+ { -+ .name = "adsl", -+ .gpio = 3, -+ .active_low = 1, -+ }, -+ { -+ .name = "ppp", -+ .gpio = 4, -+ .active_low = 1, -+ }, -+ { -+ .name = "power", -+ .gpio = 0, -+ .active_low = 1, -+ .default_trigger = "default-on", -+ }, -+ { -+ .name = "stop", -+ .gpio = 1, -+ .active_low = 1, -+ }, -+ }, -+}; - #endif - - /* -@@ -1787,6 +1824,7 @@ static const struct board_info __initdat - &board_96338gw, - &board_96338w, - &board_96338w2_e7t, -+ &board_rta1320_16m, - #endif - #ifdef CONFIG_BCM63XX_CPU_6345 - &board_96345gw2, diff --git a/target/linux/brcm63xx/patches-2.6.38/451-board_spw303v.patch b/target/linux/brcm63xx/patches-2.6.38/451-board_spw303v.patch deleted file mode 100644 index 25b7140fb..000000000 --- a/target/linux/brcm63xx/patches-2.6.38/451-board_spw303v.patch +++ /dev/null @@ -1,83 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -1741,6 +1741,72 @@ static struct board_info __initdata boar - .spis = nb4_spi_devices, - .num_spis = ARRAY_SIZE(nb4_spi_devices), - }; -+ -+ /* T-Home Speedport W 303V Typ B */ -+static struct board_info __initdata board_spw303v = { -+ .name = "96358-502V", -+ .expected_cpu_id = 0x6358, -+ -+ .has_uart0 = 1, -+ .has_enet0 = 1, -+ .has_pci = 1, -+ -+ .enet0 = { -+ .has_phy = 1, -+ .use_internal_phy = 1, -+ }, -+ -+ .leds = { -+ { -+ .name = "spw303v:green:power+adsl", -+ .gpio = 22, -+ .active_low = 1, -+ }, -+ { -+ .name = "spw303v:red:power+adsl", -+ .gpio = 2, -+ .active_low = 1, -+ }, -+ { -+ .name = "spw303v:green:ppp", -+ .gpio = 5, -+ .active_low = 1, -+ }, -+ { -+ .name = "spw303v:green:ses", -+ .gpio = 0, -+ .active_low = 1, -+ }, -+ { -+ .name = "spw303v:green:voip", -+ .gpio = 27, -+ .active_low = 1, -+ }, -+ { -+ .name = "spw303v:green:pots", -+ .gpio = 31, -+ .active_low = 1, -+ }, -+ }, -+ -+ .buttons = { -+ { -+ .desc = "reset", -+ .gpio = 11, -+ .type = EV_KEY, -+ .code = KEY_RESTART, -+ .threshold = 3, -+ }, -+ { -+ .desc = "ses", -+ .gpio = 37, -+ .active_low = 1, -+ .type = EV_KEY, -+ .code = KEY_WPS_BUTTON, -+ .threshold = 3, -+ }, -+ } -+}; - #endif - - static struct board_info __initdata board_HW553 = { -@@ -1858,6 +1924,7 @@ static const struct board_info __initdat - &board_nb4_fxc_r1, - &board_nb4_fxc_r2, - &board_HW553, -+ &board_spw303v, - #endif - }; - diff --git a/target/linux/brcm63xx/patches-2.6.38/452-board_V2500V.patch b/target/linux/brcm63xx/patches-2.6.38/452-board_V2500V.patch deleted file mode 100644 index 4b483d4ec..000000000 --- a/target/linux/brcm63xx/patches-2.6.38/452-board_V2500V.patch +++ /dev/null @@ -1,112 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -858,6 +858,63 @@ static struct board_info __initdata boar - }, - }; - -+ static struct board_info __initdata board_V2500V_BB = { -+ .name = "V2500V_BB", -+ .expected_cpu_id = 0x6348, -+ -+ .has_uart0 = 1, -+ .has_enet0 = 1, -+ .has_enet1 = 1, -+ .has_pci = 1, -+ -+ .enet0 = { -+ .has_phy = 1, -+ .use_internal_phy = 1, -+ }, -+ .enet1 = { -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+ -+ .leds = { -+ { -+ .name = "power:green", -+ .gpio = 0, -+ .active_low = 1, -+ .default_trigger = "default-on", -+ }, -+ { -+ .name = "power:red", -+ .gpio = 1, -+ .active_low = 1, -+ }, -+ { -+ .name = "adsl", -+ .gpio = 2, -+ .active_low = 1, -+ }, -+ { .name = "ppp", -+ .gpio = 3, -+ .active_low = 1, -+ }, -+ { -+ .name = "wireless", -+ .gpio = 6, -+ .active_low = 1, -+ }, -+ }, -+ .buttons = { -+ { -+ .desc = "reset", -+ .gpio = 31, -+ .active_low = 1, -+ .type = EV_KEY, -+ .code = KEY_RESTART, -+ .threshold = 3, -+ }, -+ }, -+}; -+ - #endif - - /* -@@ -1909,6 +1966,7 @@ static const struct board_info __initdat - &board_96348_D4PW, - &board_spw500v, - &board_96348sv, -+ &board_V2500V_BB, - #endif - - #ifdef CONFIG_BCM63XX_CPU_6358 -@@ -2057,6 +2115,22 @@ void __init board_prom_init(void) - val &= MPI_CSBASE_BASE_MASK; - } - boot_addr = (u8 *)KSEG1ADDR(val); -+ printk(KERN_INFO PFX "Boot address 0x%08x\n",(unsigned int)boot_addr); -+ -+ /* BT Voyager 2500V (RTA1046VW PCB) has 8 Meg flash used as two */ -+ /* banks of 4 Meg. The byte at 0xBF800000 identifies the back to use.*/ -+ /* Loading firmware from the CFE Prompt always loads to Bank 0 */ -+ /* Do an early check of CFE and then select bank 0 */ -+ -+ if (boot_addr == (u8 *)0xbf800000) { -+ u8 *tmp_boot_addr; -+ tmp_boot_addr = (u8 *)0xbfc00000; // Address of Bank 0 -+ memcpy(&nvram, tmp_boot_addr + BCM963XX_NVRAM_OFFSET, sizeof(nvram)); -+ if (!strcmp(nvram.name, "V2500V_BB")) { -+ printk(KERN_INFO PFX "V2500V: nvram bank 0\n"); -+ boot_addr = (u8 *)0xbfc00000; // Bank 0 -+ } -+ } - - /* dump cfe version */ - cfe = boot_addr + BCM963XX_CFE_VERSION_OFFSET; -@@ -2264,6 +2338,14 @@ int __init board_register_devices(void) - val = bcm_mpi_readl(MPI_CSBASE_REG(0)); - val &= MPI_CSBASE_BASE_MASK; - } -+ -+ /* BT Voyager 2500V has 8 Meg flash in two 4 Meg banks */ -+ /* Loading from CFE always uses Bank 0 */ -+ if (!strcmp(board.name, "V2500V_BB")) { -+ printk(KERN_INFO PFX "V2500V: Start in Bank 0\n"); -+ val = val + 0x400000; // Select Bank 0 start address -+ } -+ - mtd_resources[0].start = val; - mtd_resources[0].end = 0x1FFFFFFF; - diff --git a/target/linux/brcm63xx/patches-2.6.38/453-board_BTV2110.patch b/target/linux/brcm63xx/patches-2.6.38/453-board_BTV2110.patch deleted file mode 100644 index 9e280b49f..000000000 --- a/target/linux/brcm63xx/patches-2.6.38/453-board_BTV2110.patch +++ /dev/null @@ -1,73 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -401,6 +401,62 @@ static struct board_info __initdata boar - }, - }; - -+ -+/* BT Voyager 2110 */ -+static struct board_info __initdata board_V2110 = { -+ .name = "V2110", -+ .expected_cpu_id = 0x6348, -+ -+ .has_uart0 = 1, -+ .has_enet1 = 1, -+ .has_pci = 1, -+ -+ .enet1 = { -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+ -+ .leds = { -+ { -+ .name = "V2110:green:power", -+ .gpio = 0, -+ .active_low = 1, -+ .default_trigger = "default-on", -+ }, -+ { -+ .name = "V2110:red:power", -+ .gpio = 1, -+ .active_low = 1, -+ }, -+ { -+ .name = "V2110:green:adsl", -+ .gpio = 2, -+ .active_low = 1, -+ }, -+ { .name = "V2110:green:ppp", -+ .gpio = 3, -+ .active_low = 1, -+ }, -+ { -+ .name = "V2110:green:wireless", -+ .gpio = 6, -+ .active_low = 1, -+ }, -+ }, -+ -+ .buttons = { -+ { -+ .desc = "reset", -+ .gpio = 33, -+ .active_low = 1, -+ .type = EV_KEY, -+ .code = KEY_RESTART, -+ .threshold = 3, -+ }, -+ }, -+}; -+ -+ - static struct board_info __initdata board_96348gw = { - .name = "96348GW", - .expected_cpu_id = 0x6348, -@@ -1967,6 +2023,7 @@ static const struct board_info __initdat - &board_spw500v, - &board_96348sv, - &board_V2500V_BB, -+ &board_V2110, - #endif - - #ifdef CONFIG_BCM63XX_CPU_6358 diff --git a/target/linux/brcm63xx/patches-2.6.38/454-board_livebox.patch b/target/linux/brcm63xx/patches-2.6.38/454-board_livebox.patch deleted file mode 100644 index 6c390456c..000000000 --- a/target/linux/brcm63xx/patches-2.6.38/454-board_livebox.patch +++ /dev/null @@ -1,251 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/Kconfig -+++ b/arch/mips/bcm63xx/boards/Kconfig -@@ -8,4 +8,10 @@ config BOARD_BCM963XX - select SSB - help - -+config BOARD_LIVEBOX -+ bool "Inventel Livebox(es) boards" -+ select SSB -+ help -+ Inventel Livebox boards using the RedBoot bootloader. -+ - endchoice ---- a/arch/mips/bcm63xx/boards/Makefile -+++ b/arch/mips/bcm63xx/boards/Makefile -@@ -1,3 +1,4 @@ - obj-$(CONFIG_BOARD_BCM963XX) += board_bcm963xx.o -+obj-$(CONFIG_BOARD_LIVEBOX) += board_livebox.o - - EXTRA_CFLAGS += -Werror ---- /dev/null -+++ b/arch/mips/bcm63xx/boards/board_livebox.c -@@ -0,0 +1,228 @@ -+/* -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file "COPYING" in the main directory of this archive -+ * for more details. -+ * -+ * Copyright (C) 2008 Florian Fainelli <florian@openwrt.org> -+ */ -+ -+#include <linux/init.h> -+#include <linux/kernel.h> -+#include <linux/string.h> -+#include <linux/platform_device.h> -+#include <linux/mtd/mtd.h> -+#include <linux/mtd/partitions.h> -+#include <linux/mtd/physmap.h> -+#include <linux/input.h> -+#include <linux/gpio_buttons.h> -+#include <asm/addrspace.h> -+#include <bcm63xx_board.h> -+#include <bcm63xx_cpu.h> -+#include <bcm63xx_regs.h> -+#include <bcm63xx_io.h> -+#include <bcm63xx_dev_uart.h> -+#include <bcm63xx_dev_pci.h> -+#include <bcm63xx_dev_enet.h> -+#include <bcm63xx_dev_pcmcia.h> -+#include <bcm63xx_dev_usb_ohci.h> -+#include <bcm63xx_dev_usb_ehci.h> -+#include <board_bcm963xx.h> -+ -+#define PFX "board_livebox: " -+ -+static unsigned int mac_addr_used = 0; -+static struct board_info board; -+ -+/* -+ * known 6348 boards -+ */ -+#ifdef CONFIG_BCM63XX_CPU_6348 -+static struct board_info __initdata board_livebox = { -+ .name = "Livebox", -+ .expected_cpu_id = 0x6348, -+ -+ .has_uart0 = 1, -+ .has_enet0 = 1, -+ .has_enet1 = 1, -+ .has_pci = 1, -+ -+ .enet0 = { -+ .has_phy = 1, -+ .use_internal_phy = 1, -+ }, -+ -+ .enet1 = { -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+ -+ .has_ohci0 = 1, -+ .has_pccard = 1, -+ .has_ehci0 = 1, -+}; -+#endif -+ -+/* -+ * all boards -+ */ -+static const struct board_info __initdata *bcm963xx_boards[] = { -+#ifdef CONFIG_BCM63XX_CPU_6348 -+ &board_livebox -+#endif -+}; -+ -+/* -+ * early init callback -+ */ -+void __init board_prom_init(void) -+{ -+ u32 val; -+ -+ /* read base address of boot chip select (0) */ -+ val = bcm_mpi_readl(MPI_CSBASE_REG(0)); -+ val &= MPI_CSBASE_BASE_MASK; -+ -+ /* assume board is a Livebox */ -+ memcpy(&board, bcm963xx_boards[0], sizeof(board)); -+ -+ /* setup pin multiplexing depending on board enabled device, -+ * this has to be done this early since PCI init is done -+ * inside arch_initcall */ -+ val = 0; -+ -+ if (board.has_pci) { -+ bcm63xx_pci_enabled = 1; -+ if (BCMCPU_IS_6348()) -+ val |= GPIO_MODE_6348_G2_PCI; -+ } -+ -+ if (board.has_pccard) { -+ if (BCMCPU_IS_6348()) -+ val |= GPIO_MODE_6348_G1_MII_PCCARD; -+ } -+ -+ if (board.has_enet0 && !board.enet0.use_internal_phy) { -+ if (BCMCPU_IS_6348()) -+ val |= GPIO_MODE_6348_G3_EXT_MII | -+ GPIO_MODE_6348_G0_EXT_MII; -+ } -+ -+ if (board.has_enet1 && !board.enet1.use_internal_phy) { -+ if (BCMCPU_IS_6348()) -+ val |= GPIO_MODE_6348_G3_EXT_MII | -+ GPIO_MODE_6348_G0_EXT_MII; -+ } -+ -+ bcm_gpio_writel(val, GPIO_MODE_REG); -+} -+ -+/* -+ * second stage init callback, good time to panic if we couldn't -+ * identify on which board we're running since early printk is working -+ */ -+void __init board_setup(void) -+{ -+ if (!board.name[0]) -+ panic("unable to detect bcm963xx board"); -+ printk(KERN_INFO PFX "board name: %s\n", board.name); -+ -+ /* make sure we're running on expected cpu */ -+ if (bcm63xx_get_cpu_id() != board.expected_cpu_id) -+ panic("unexpected CPU for bcm963xx board"); -+} -+ -+/* -+ * return board name for /proc/cpuinfo -+ */ -+const char *board_get_name(void) -+{ -+ return board.name; -+} -+ -+/* -+ * register & return a new board mac address -+ */ -+ -+static int board_get_mac_address(u8 *mac) -+{ -+ u8 default_mac[ETH_ALEN] = {0x00, 0x07, 0x3A, 0x00, 0x00, 0x00}; -+ u8 *p; -+ int count; -+ -+ memcpy(mac, default_mac, ETH_ALEN); -+ -+ p = mac + ETH_ALEN - 1; -+ count = mac_addr_used; -+ -+ while (count--) { -+ do { -+ (*p)++; -+ if (*p != 0) -+ break; -+ p--; -+ } while (p != mac); -+ } -+ -+ if (p == mac) { -+ printk(KERN_ERR PFX "unable to fetch mac address\n"); -+ return -ENODEV; -+ } -+ mac_addr_used++; -+ -+ return 0; -+} -+ -+static struct resource mtd_resources[] = { -+ { -+ .start = 0, /* filled at runtime */ -+ .end = 0, /* filled at runtime */ -+ .flags = IORESOURCE_MEM, -+ } -+}; -+ -+static struct platform_device mtd_dev = { -+ .name = "bcm963xx-flash", -+ .resource = mtd_resources, -+ .num_resources = ARRAY_SIZE(mtd_resources), -+}; -+ -+ -+/* -+ * third stage init callback, register all board devices. -+ */ -+int __init board_register_devices(void) -+{ -+ u32 val; -+ -+ if (board.has_uart0) -+ bcm63xx_uart_register(0); -+ -+ if (board.has_pccard) -+ bcm63xx_pcmcia_register(); -+ -+ if (board.has_enet0 && -+ !board_get_mac_address(board.enet0.mac_addr)) -+ bcm63xx_enet_register(0, &board.enet0); -+ -+ if (board.has_enet1 && -+ !board_get_mac_address(board.enet1.mac_addr)) -+ bcm63xx_enet_register(1, &board.enet1); -+ -+ if (board.has_ohci0) -+ bcm63xx_ohci_register(); -+ -+ if (board.has_ehci0) -+ bcm63xx_ehci_register(); -+ -+ -+ /* read base address of boot chip select (0) */ -+ val = bcm_mpi_readl(MPI_CSBASE_REG(0)); -+ val &= MPI_CSBASE_BASE_MASK; -+ mtd_resources[0].start = val; -+ mtd_resources[0].end = 0x1FFFFFFF; -+ -+ platform_device_register(&mtd_dev); -+ -+ return 0; -+} -+ diff --git a/target/linux/brcm63xx/patches-2.6.38/455-board_ct536_ct5621.patch b/target/linux/brcm63xx/patches-2.6.38/455-board_ct536_ct5621.patch deleted file mode 100644 index 1af07ae11..000000000 --- a/target/linux/brcm63xx/patches-2.6.38/455-board_ct536_ct5621.patch +++ /dev/null @@ -1,60 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -457,6 +457,49 @@ static struct board_info __initdata boar - }; - - -+static struct board_info __initdata board_ct536_ct5621 = { -+ .name = "CT536_CT5621", -+ .expected_cpu_id = 0x6348, -+ -+ .has_uart0 = 1, -+ .has_enet0 = 0, -+ .has_enet1 = 1, -+ .has_pci = 1, -+ -+ .enet1 = { -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+ -+ .has_ohci0 = 1, -+ .has_pccard = 1, -+ .has_ehci0 = 1, -+ -+ .leds = { -+ { -+ .name = "adsl-fail", -+ .gpio = 2, -+ .active_low = 1, -+ }, -+ { -+ .name = "power", -+ .gpio = 0, -+ .active_low = 1, -+ .default_trigger = "default-on", -+ }, -+ }, -+ .buttons = { -+ { -+ .desc = "reset", -+ .gpio = 33, -+ .active_low = 1, -+ .type = EV_KEY, -+ .code = KEY_RESTART, -+ .threshold = 3, -+ }, -+ }, -+}; -+ - static struct board_info __initdata board_96348gw = { - .name = "96348GW", - .expected_cpu_id = 0x6348, -@@ -2024,6 +2067,7 @@ static const struct board_info __initdat - &board_96348sv, - &board_V2500V_BB, - &board_V2110, -+ &board_ct536_ct5621, - #endif - - #ifdef CONFIG_BCM63XX_CPU_6358 diff --git a/target/linux/brcm63xx/patches-2.6.38/500-ssb-add-callback-for-sprom.patch b/target/linux/brcm63xx/patches-2.6.38/500-ssb-add-callback-for-sprom.patch deleted file mode 100644 index 349e5f500..000000000 --- a/target/linux/brcm63xx/patches-2.6.38/500-ssb-add-callback-for-sprom.patch +++ /dev/null @@ -1,143 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -2128,6 +2128,17 @@ static struct ssb_sprom bcm63xx_sprom = - .boardflags_lo = 0x2848, - .boardflags_hi = 0x0000, - }; -+ -+int bcm63xx_get_fallback_sprom(struct ssb_bus *bus, struct ssb_sprom *out) -+{ -+ if (bus->bustype == SSB_BUSTYPE_PCI) { -+ memcpy(out, &bcm63xx_sprom, sizeof(struct ssb_sprom)); -+ return 0; -+ } else { -+ printk(KERN_ERR PFX "unable to fill SPROM for given bustype.\n"); -+ return -EINVAL; -+ } -+} - #endif - - /* -@@ -2328,8 +2339,9 @@ void __init board_prom_init(void) - if (!board_get_mac_address(bcm63xx_sprom.il0mac)) { - memcpy(bcm63xx_sprom.et0mac, bcm63xx_sprom.il0mac, ETH_ALEN); - memcpy(bcm63xx_sprom.et1mac, bcm63xx_sprom.il0mac, ETH_ALEN); -- if (ssb_arch_set_fallback_sprom(&bcm63xx_sprom) < 0) -- printk(KERN_ERR "failed to register fallback SPROM\n"); -+ if (ssb_arch_register_fallback_sprom( -+ &bcm63xx_get_fallback_sprom) < 0) -+ printk(KERN_ERR PFX "failed to register fallback SPROM\n"); - } - #endif - } ---- a/drivers/ssb/pci.c -+++ b/drivers/ssb/pci.c -@@ -662,7 +662,6 @@ static int sprom_extract(struct ssb_bus - static int ssb_pci_sprom_get(struct ssb_bus *bus, - struct ssb_sprom *sprom) - { -- const struct ssb_sprom *fallback; - int err; - u16 *buf; - -@@ -707,10 +706,14 @@ static int ssb_pci_sprom_get(struct ssb_ - if (err) { - /* All CRC attempts failed. - * Maybe there is no SPROM on the device? -- * If we have a fallback, use that. */ -- fallback = ssb_get_fallback_sprom(); -- if (fallback) { -- memcpy(sprom, fallback, sizeof(*sprom)); -+ * Now we ask the arch code if there is some sprom -+ * avaliable for this device in some other storage */ -+ err = ssb_fill_sprom_with_fallback(bus, sprom); -+ if (err) { -+ ssb_printk(KERN_WARNING PFX "WARNING: Using" -+ " fallback SPROM failed (err %d)\n", -+ err); -+ } else { - err = 0; - goto out_free; - } ---- a/drivers/ssb/sprom.c -+++ b/drivers/ssb/sprom.c -@@ -17,7 +17,7 @@ - #include <linux/slab.h> - - --static const struct ssb_sprom *fallback_sprom; -+static int(*get_fallback_sprom)(struct ssb_bus *dev, struct ssb_sprom *out); - - - static int sprom2hex(const u16 *sprom, char *buf, size_t buf_len, -@@ -145,13 +145,14 @@ out: - } - - /** -- * ssb_arch_set_fallback_sprom - Set a fallback SPROM for use if no SPROM is found. -+ * ssb_arch_register_fallback_sprom - Registers a method providing a fallback -+ * SPROM if no SPROM is found. - * -- * @sprom: The SPROM data structure to register. -+ * @sprom_callback: The callbcak function. - * -- * With this function the architecture implementation may register a fallback -- * SPROM data structure. The fallback is only used for PCI based SSB devices, -- * where no valid SPROM can be found in the shadow registers. -+ * With this function the architecture implementation may register a callback -+ * handler which wills the SPROM data structure. The fallback is only used for -+ * PCI based SSB devices, where no valid SPROM can be found in the shadow registers. - * - * This function is useful for weird architectures that have a half-assed SSB device - * hardwired to their PCI bus. -@@ -163,18 +164,21 @@ out: - * - * This function is available for architecture code, only. So it is not exported. - */ --int ssb_arch_set_fallback_sprom(const struct ssb_sprom *sprom) -+int ssb_arch_register_fallback_sprom(int (*sprom_callback)(struct ssb_bus *bus, struct ssb_sprom *out)) - { -- if (fallback_sprom) -+ if (get_fallback_sprom) - return -EEXIST; -- fallback_sprom = sprom; -+ get_fallback_sprom = sprom_callback; - - return 0; - } - --const struct ssb_sprom *ssb_get_fallback_sprom(void) -+int ssb_fill_sprom_with_fallback(struct ssb_bus *bus, struct ssb_sprom *out) - { -- return fallback_sprom; -+ if (!get_fallback_sprom) -+ return -ENOENT; -+ -+ return get_fallback_sprom(bus, out); - } - - /* http://bcm-v4.sipsolutions.net/802.11/IsSpromAvailable */ ---- a/drivers/ssb/ssb_private.h -+++ b/drivers/ssb/ssb_private.h -@@ -171,7 +171,7 @@ ssize_t ssb_attr_sprom_store(struct ssb_ - const char *buf, size_t count, - int (*sprom_check_crc)(const u16 *sprom, size_t size), - int (*sprom_write)(struct ssb_bus *bus, const u16 *sprom)); --extern const struct ssb_sprom *ssb_get_fallback_sprom(void); -+extern int ssb_fill_sprom_with_fallback(struct ssb_bus *bus, struct ssb_sprom *out); - - - /* core.c */ ---- a/include/linux/ssb/ssb.h -+++ b/include/linux/ssb/ssb.h -@@ -404,7 +404,9 @@ extern bool ssb_is_sprom_available(struc - - /* Set a fallback SPROM. - * See kdoc at the function definition for complete documentation. */ --extern int ssb_arch_set_fallback_sprom(const struct ssb_sprom *sprom); -+extern int ssb_arch_register_fallback_sprom( -+ int (*sprom_callback)(struct ssb_bus *bus, -+ struct ssb_sprom *out)); - - /* Suspend a SSB bus. - * Call this from the parent bus suspend routine. */ diff --git a/target/linux/brcm63xx/patches-2.6.38/977-ssb_export_fallback_sprom.patch b/target/linux/brcm63xx/patches-2.6.38/977-ssb_export_fallback_sprom.patch deleted file mode 100644 index 478019d99..000000000 --- a/target/linux/brcm63xx/patches-2.6.38/977-ssb_export_fallback_sprom.patch +++ /dev/null @@ -1,19 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -2108,7 +2108,7 @@ static void __init nb4_nvram_fixup(void) - * bcm4318 WLAN work - */ - #ifdef CONFIG_SSB_PCIHOST --static struct ssb_sprom bcm63xx_sprom = { -+struct ssb_sprom bcm63xx_sprom = { - .revision = 0x02, - .board_rev = 0x17, - .country_code = 0x0, -@@ -2128,6 +2128,7 @@ static struct ssb_sprom bcm63xx_sprom = - .boardflags_lo = 0x2848, - .boardflags_hi = 0x0000, - }; -+EXPORT_SYMBOL(bcm63xx_sprom); - - int bcm63xx_get_fallback_sprom(struct ssb_bus *bus, struct ssb_sprom *out) - { |