Delete old brcm63xx files

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13210 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 0 insertions, 334 deletions

diff --git a/target/linux/brcm63xx/files/include/asm-mips/mach-bcm963xx/6338_map_part.h b/target/linux/brcm63xx/files/include/asm-mips/mach-bcm963xx/6338_map_part.h
deleted file mode 100644
index 70bf80734..000000000
--- a/target/linux/brcm63xx/files/include/asm-mips/mach-bcm963xx/6338_map_part.h
+++ /dev/null
@@ -1,334 +0,0 @@
-/*
-<:copyright-gpl 
- Copyright 2004 Broadcom Corp. All Rights Reserved. 
- 
- This program is free software; you can distribute it and/or modify it 
- under the terms of the GNU General Public License (Version 2) as 
- published by the Free Software Foundation. 
- 
- This program is distributed in the hope it will be useful, but WITHOUT 
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 
- FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License 
- for more details. 
- 
- You should have received a copy of the GNU General Public License along 
- with this program; if not, write to the Free Software Foundation, Inc., 
- 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. 
-:>
-*/
-
-#ifndef __BCM6338_MAP_H
-#define __BCM6338_MAP_H
-
-#include "bcmtypes.h"
-
-#define PERF_BASE           0xfffe0000
-#define TIMR_BASE           0xfffe0200 
-#define UART_BASE           0xfffe0300
-#define GPIO_BASE           0xfffe0400
-#define SPI_BASE            0xfffe0c00
-
-typedef struct PerfControl {
-  uint32        RevID;
-  uint16        testControl;
-  uint16        blkEnables;
-#define EMAC_CLK_EN     0x0010
-#define USBS_CLK_EN     0x0010
-#define SAR_CLK_EN      0x0020
-
-#define SPI_CLK_EN      0x0200
-
-  uint32        pll_control;
-#define SOFT_RESET 0x00000001
-
-  uint32        IrqMask;
-  uint32        IrqStatus;
-
-  uint32        ExtIrqCfg;
-#define EI_SENSE_SHFT   0
-#define EI_STATUS_SHFT  5
-#define EI_CLEAR_SHFT   10
-#define EI_MASK_SHFT    15
-#define EI_INSENS_SHFT  20
-#define EI_LEVEL_SHFT   25
-
-  uint32        unused[4];      /* (18) */
-  uint32        BlockSoftReset; /* (28) */
-#define BSR_SPI             0x00000001
-#define BSR_EMAC            0x00000004
-#define BSR_USBH            0x00000008
-#define BSR_USBS            0x00000010
-#define BSR_ADSL            0x00000020
-#define BSR_DMAMEM          0x00000040
-#define BSR_SAR             0x00000080
-#define BSR_ACLC            0x00000100
-#define BSR_ADSL_MIPS_PLL   0x00000400
-#define BSR_ALL_BLOCKS      \
-    (BSR_SPI | BSR_EMAC | BSR_USBH | BSR_USBS | BSR_ADSL | BSR_DMAMEM | \
-     BSR_SAR | BSR_ACLC | BSR_ADSL_MIPS_PLL) 
-} PerfControl;
-
-#define PERF ((volatile PerfControl * const) PERF_BASE)
-
-
-typedef struct Timer {
-  uint16        unused0;
-  byte          TimerMask;
-#define TIMER0EN        0x01
-#define TIMER1EN        0x02
-#define TIMER2EN        0x04
-  byte          TimerInts;
-#define TIMER0          0x01
-#define TIMER1          0x02
-#define TIMER2          0x04
-#define WATCHDOG        0x08
-  uint32        TimerCtl0;
-  uint32        TimerCtl1;
-  uint32        TimerCtl2;
-#define TIMERENABLE     0x80000000
-#define RSTCNTCLR       0x40000000      
-  uint32        TimerCnt0;
-  uint32        TimerCnt1;
-  uint32        TimerCnt2;
-  uint32        WatchDogDefCount;
-
-  /* Write 0xff00 0x00ff to Start timer
-   * Write 0xee00 0x00ee to Stop and re-load default count
-   * Read from this register returns current watch dog count
-   */
-  uint32        WatchDogCtl;
-
-  /* Number of 40-MHz ticks for WD Reset pulse to last */
-  uint32        WDResetCount;
-} Timer;
-
-#define TIMER ((volatile Timer * const) TIMR_BASE)
-typedef struct UartChannel {
-  byte          unused0;
-  byte          control;
-#define BRGEN           0x80    /* Control register bit defs */
-#define TXEN            0x40
-#define RXEN            0x20
-#define LOOPBK          0x10
-#define TXPARITYEN      0x08
-#define TXPARITYEVEN    0x04
-#define RXPARITYEN      0x02
-#define RXPARITYEVEN    0x01
-
-  byte          config;
-#define XMITBREAK       0x40
-#define BITS5SYM        0x00
-#define BITS6SYM        0x10
-#define BITS7SYM        0x20
-#define BITS8SYM        0x30
-#define ONESTOP         0x07
-#define TWOSTOP         0x0f
-  /* 4-LSBS represent STOP bits/char
-   * in 1/8 bit-time intervals.  Zero
-   * represents 1/8 stop bit interval.
-   * Fifteen represents 2 stop bits.
-   */
-  byte          fifoctl;
-#define RSTTXFIFOS      0x80
-#define RSTRXFIFOS      0x40
-  /* 5-bit TimeoutCnt is in low bits of this register.
-   *  This count represents the number of characters 
-   *  idle times before setting receive Irq when below threshold
-   */
-  uint32        baudword;
-  /* When divide SysClk/2/(1+baudword) we should get 32*bit-rate
-   */
-
-  byte          txf_levl;       /* Read-only fifo depth */
-  byte          rxf_levl;       /* Read-only fifo depth */
-  byte          fifocfg;        /* Upper 4-bits are TxThresh, Lower are
-                                 *      RxThreshold.  Irq can be asserted
-                                 *      when rx fifo> thresh, txfifo<thresh
-                                 */
-  byte          prog_out;       /* Set value of DTR (Bit0), RTS (Bit1)
-                                 *  if these bits are also enabled to GPIO_o
-                                 */
-#define	DTREN	0x01
-#define	RTSEN	0x02
-
-  byte          unused1;
-  byte          DeltaIPEdgeNoSense;     /* Low 4-bits, set corr bit to 1 to 
-                                         * detect irq on rising AND falling 
-                                         * edges for corresponding GPIO_i
-                                         * if enabled (edge insensitive)
-                                         */
-  byte          DeltaIPConfig_Mask;     /* Upper 4 bits: 1 for posedge sense
-                                         *      0 for negedge sense if
-                                         *      not configured for edge
-                                         *      insensitive (see above)
-                                         * Lower 4 bits: Mask to enable change
-                                         *  detection IRQ for corresponding
-                                         *  GPIO_i
-                                         */
-  byte          DeltaIP_SyncIP;         /* Upper 4 bits show which bits
-                                         *  have changed (may set IRQ).
-                                         *  read automatically clears bit
-                                         * Lower 4 bits are actual status
-                                         */
-
-  uint16        intMask;				/* Same Bit defs for Mask and status */
-  uint16        intStatus;
-#define DELTAIP         0x0001
-#define TXUNDERR        0x0002
-#define TXOVFERR        0x0004
-#define TXFIFOTHOLD     0x0008
-#define TXREADLATCH     0x0010
-#define TXFIFOEMT       0x0020
-#define RXUNDERR        0x0040
-#define RXOVFERR        0x0080
-#define RXTIMEOUT       0x0100
-#define RXFIFOFULL      0x0200
-#define RXFIFOTHOLD     0x0400
-#define RXFIFONE        0x0800
-#define RXFRAMERR       0x1000
-#define RXPARERR        0x2000
-#define RXBRK           0x4000
-
-  uint16        unused2;
-  uint16        Data;                   /* Write to TX, Read from RX */
-                                        /* bits 11:8 are BRK,PAR,FRM errors */
-
-  uint32		unused3;
-  uint32		unused4;
-} Uart;
-
-#define UART ((volatile Uart * const) UART_BASE)
-
-typedef struct GpioControl {
-  uint32        unused0;
-  uint32        GPIODir;      /* bits 7:0 */
-  uint32        unused1;
-  uint32        GPIOio;       /* bits 7:0 */
-  uint32        LEDCtrl;
-#define         LED3_STROBE             0x08000000
-#define         LED2_STROBE             0x04000000
-#define         LED1_STROBE             0x02000000
-#define         LED0_STROBE             0x01000000
-#define         LED_TEST                0x00010000
-#define         LED3_DISABLE_LINK_ACT   0x00008000
-#define         LED2_DISABLE_LINK_ACT   0x00004000
-#define         LED1_DISABLE_LINK_ACT   0x00002000
-#define         LED0_DISABLE_LINK_ACT   0x00001000
-#define         LED_INTERVAL_SET_MASK   0x00000f00
-#define         LED_INTERVAL_SET_320MS  0x00000500
-#define         LED_INTERVAL_SET_160MS  0x00000400
-#define         LED_INTERVAL_SET_80MS   0x00000300
-#define         LED_INTERVAL_SET_40MS   0x00000200
-#define         LED_INTERVAL_SET_20MS   0x00000100
-#define         LED3_ON                 0x00000080
-#define         LED2_ON                 0x00000040
-#define         LED1_ON                 0x00000020
-#define         LED0_ON                 0x00000010
-#define         LED3_ENABLE             0x00000008
-#define         LED2_ENABLE             0x00000004
-#define         LED1_ENABLE             0x00000002
-#define         LED0_ENABLE             0x00000001
-  uint32        SpiSlaveCfg;
-#define         SPI_SLAVE_RESET         0x00010000
-#define         SPI_RESTRICT            0x00000400
-#define         SPI_DELAY_DISABLE       0x00000200
-#define         SPI_PROBE_MUX_SEL_MASK  0x000001e0
-#define         SPI_SER_ADDR_CFG_MASK   0x0000000c
-#define         SPI_MODE                0x00000001
-  uint32        vRegConfig;
-} GpioControl;
-
-#define GPIO ((volatile GpioControl * const) GPIO_BASE)
-
-/* Number to mask conversion macro used for GPIODir and GPIOio */
-#define GPIO_NUM_MAX_BITS_MASK          0x0f
-#define GPIO_NUM_TO_MASK(X)             (1 << ((X) & GPIO_NUM_MAX_BITS_MASK))
-
-/*
-** Spi Controller
-*/
-
-typedef struct SpiControl {
-  uint16        spiCmd;                 /* (0x0): SPI command */
-#define SPI_CMD_START_IMMEDIATE         3
-
-#define SPI_CMD_COMMAND_SHIFT           0
-#define SPI_CMD_DEVICE_ID_SHIFT         4
-#define SPI_CMD_PREPEND_BYTE_CNT_SHIFT  8
-
-  byte          spiIntStatus;           /* (0x2): SPI interrupt status */
-  byte          spiMaskIntStatus;       /* (0x3): SPI masked interrupt status */
-
-  byte          spiIntMask;             /* (0x4): SPI interrupt mask */
-#define SPI_INTR_CMD_DONE               0x01
-#define SPI_INTR_CLEAR_ALL              0x1f
-
-  byte          spiStatus;              /* (0x5): SPI status */
-
-  byte          spiClkCfg;              /* (0x6): SPI clock configuration */
-
-  byte          spiFillByte;            /* (0x7): SPI fill byte */
-
-  byte          unused0; 
-  byte          spiMsgTail;             /* (0x9): msgtail */
-  byte          unused1; 
-  byte          spiRxTail;              /* (0xB): rxtail */
-
-  uint32        unused2[13];            /* (0x0c - 0x3c) reserved */
-
-  byte          spiMsgCtl;              /* (0x40) control byte */
-#define HALF_DUPLEX_W                   1
-#define HALF_DUPLEX_R                   2
-#define SPI_MSG_TYPE_SHIFT              6
-#define SPI_BYTE_CNT_SHIFT              0
-  byte          spiMsgData[63];         /* (0x41 - 0x7f) msg data */
-  byte          spiRxDataFifo[64];      /* (0x80 - 0xbf) rx data */
-  byte          unused3[64];            /* (0xc0 - 0xff) reserved */
-} SpiControl;
-
-#define SPI ((volatile SpiControl * const) SPI_BASE)
-
-/*
-** External Bus Interface
-*/
-typedef struct EbiChipSelect {
-  uint32        base;                   /* base address in upper 24 bits */
-#define EBI_SIZE_8K         0
-#define EBI_SIZE_16K        1
-#define EBI_SIZE_32K        2
-#define EBI_SIZE_64K        3
-#define EBI_SIZE_128K       4
-#define EBI_SIZE_256K       5
-#define EBI_SIZE_512K       6
-#define EBI_SIZE_1M         7
-#define EBI_SIZE_2M         8
-#define EBI_SIZE_4M         9
-#define EBI_SIZE_8M         10
-#define EBI_SIZE_16M        11
-#define EBI_SIZE_32M        12
-#define EBI_SIZE_64M        13
-#define EBI_SIZE_128M       14
-#define EBI_SIZE_256M       15
-  uint32        config;
-#define EBI_ENABLE          0x00000001      /* .. enable this range */
-#define EBI_WAIT_STATES     0x0000000e      /* .. mask for wait states */
-#define EBI_WTST_SHIFT      1               /* .. for shifting wait states */
-#define EBI_WORD_WIDE       0x00000010      /* .. 16-bit peripheral, else 8 */
-#define EBI_WREN            0x00000020      /* enable posted writes */
-#define EBI_POLARITY        0x00000040      /* .. set to invert something, 
-                                        **    don't know what yet */
-#define EBI_TS_TA_MODE      0x00000080      /* .. use TS/TA mode */
-#define EBI_TS_SEL          0x00000100      /* .. drive tsize, not bs_b */
-#define EBI_FIFO            0x00000200      /* .. use fifo */
-#define EBI_RE              0x00000400      /* .. Reverse Endian */
-} EbiChipSelect;
-
-typedef struct MpiRegisters {
-  EbiChipSelect cs[1];                  /* size chip select configuration */
-} MpiRegisters;
-
-#define MPI ((volatile MpiRegisters * const) MPI_BASE)
-
-
-#endif
-