[brcm63xx] drop support for 2.6.30 kernel

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20438 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 0 insertions, 124 deletions

diff --git a/target/linux/brcm63xx/files-2.6.30/arch/mips/bcm63xx/setup.c b/target/linux/brcm63xx/files-2.6.30/arch/mips/bcm63xx/setup.c
deleted file mode 100644
index 6d1ce6442..000000000
--- a/target/linux/brcm63xx/files-2.6.30/arch/mips/bcm63xx/setup.c
+++ /dev/null
@@ -1,124 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/bootmem.h>
-#include <linux/ioport.h>
-#include <linux/pm.h>
-#include <asm/bootinfo.h>
-#include <asm/time.h>
-#include <asm/reboot.h>
-#include <asm/cacheflush.h>
-#include <bcm63xx_board.h>
-#include <bcm63xx_cpu.h>
-#include <bcm63xx_regs.h>
-#include <bcm63xx_io.h>
-
-void bcm63xx_machine_halt(void)
-{
-	printk(KERN_INFO "System halted\n");
-	while (1);
-}
-
-static void bcm6348_a1_reboot(void)
-{
-	u32 reg;
-
-	/* soft reset all blocks */
-	printk(KERN_INFO "soft-reseting all blocks ...\n");
-	reg = bcm_perf_readl(PERF_SOFTRESET_REG);
-	reg &= ~SOFTRESET_6348_ALL;
-	bcm_perf_writel(reg, PERF_SOFTRESET_REG);
-	mdelay(10);
-
-	reg = bcm_perf_readl(PERF_SOFTRESET_REG);
-	reg |= SOFTRESET_6348_ALL;
-	bcm_perf_writel(reg, PERF_SOFTRESET_REG);
-	mdelay(10);
-
-	/* Jump to the power on address. */
-	printk(KERN_INFO "jumping to reset vector.\n");
-	/* set high vectors (base at 0xbfc00000 */
-	set_c0_status(ST0_BEV | ST0_ERL);
-	/* run uncached in kseg0 */
-	change_c0_config(CONF_CM_CMASK, CONF_CM_UNCACHED);
-	__flush_cache_all();
-	/* remove all wired TLB entries */
-	write_c0_wired(0);
-	__asm__ __volatile__(
-		"jr\t%0"
-		:
-		: "r" (0xbfc00000));
-	while (1);
-}
-
-void bcm63xx_machine_reboot(void)
-{
-	u32 reg;
-
-	/* mask and clear all external irq */
-	reg = bcm_perf_readl(PERF_EXTIRQ_CFG_REG);
-	reg &= ~EXTIRQ_CFG_MASK_ALL;
-	reg |= EXTIRQ_CFG_CLEAR_ALL;
-	bcm_perf_writel(reg, PERF_EXTIRQ_CFG_REG);
-
-	if (BCMCPU_IS_6348() && (bcm63xx_get_cpu_rev() == 0xa1))
-		bcm6348_a1_reboot();
-
-	printk(KERN_INFO "triggering watchdog soft-reset...\n");
-	reg = bcm_perf_readl(PERF_SYS_PLL_CTL_REG);
-	reg |= SYS_PLL_SOFT_RESET;
-	bcm_perf_writel(reg, PERF_SYS_PLL_CTL_REG);
-	while (1);
-}
-
-static void __bcm63xx_machine_reboot(char *p)
-{
-	bcm63xx_machine_reboot();
-}
-
-/*
- * return system type in /proc/cpuinfo
- */
-const char *get_system_type(void)
-{
-	static char buf[128];
-	snprintf(buf, sizeof (buf), "bcm63xx/%s (0x%04x/0x%04X)",
-		 board_get_name(),
-		 bcm63xx_get_cpu_id(), bcm63xx_get_cpu_rev());
-	return buf;
-}
-
-void __init plat_time_init(void)
-{
-	mips_hpt_frequency = bcm63xx_get_cpu_freq() / 2;
-}
-
-void __init plat_mem_setup(void)
-{
-	add_memory_region(0, bcm63xx_get_memory_size(), BOOT_MEM_RAM);
-
-	_machine_halt = bcm63xx_machine_halt;
-	_machine_restart = __bcm63xx_machine_reboot;
-	pm_power_off = bcm63xx_machine_halt;
-
-	set_io_port_base(0);
-	ioport_resource.start = 0;
-	ioport_resource.end = ~0;
-
-	board_setup();
-}
-
-int __init bcm63xx_register_devices(void)
-{
-	return board_register_devices();
-}
-
-arch_initcall(bcm63xx_register_devices);