[brcm63xx] move files to files-2.6.30, to ease newer kernel integration

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19471 3c298f89-4303-0410-b956-a3cf2f4a3e73

4 files changed, 1247 insertions, 0 deletions

diff --git a/target/linux/brcm63xx/files-2.6.30/arch/mips/bcm63xx/boards/Kconfig b/target/linux/brcm63xx/files-2.6.30/arch/mips/bcm63xx/boards/Kconfig
new file mode 100644
index 000000000..970615e67
--- /dev/null
+++ b/target/linux/brcm63xx/files-2.6.30/arch/mips/bcm63xx/boards/Kconfig
@@ -0,0 +1,15 @@
+choice
+	prompt "Board support"
+	depends on BCM63XX
+	default BOARD_BCM963XX
+
+config BOARD_BCM963XX
+       bool "Generic Broadcom 963xx boards"
+       help
+
+config BOARD_LIVEBOX
+	bool "Inventel Livebox(es) boards"
+	help
+	  Boards using RedBoot.
+
+endchoice
diff --git a/target/linux/brcm63xx/files-2.6.30/arch/mips/bcm63xx/boards/Makefile b/target/linux/brcm63xx/files-2.6.30/arch/mips/bcm63xx/boards/Makefile
new file mode 100644
index 000000000..098137b59
--- /dev/null
+++ b/target/linux/brcm63xx/files-2.6.30/arch/mips/bcm63xx/boards/Makefile
@@ -0,0 +1,2 @@
+obj-$(CONFIG_BOARD_BCM963XX)		+= board_bcm963xx.o
+obj-$(CONFIG_BOARD_LIVEBOX)		+= board_livebox.o
diff --git a/target/linux/brcm63xx/files-2.6.30/arch/mips/bcm63xx/boards/board_bcm963xx.c b/target/linux/brcm63xx/files-2.6.30/arch/mips/bcm63xx/boards/board_bcm963xx.c
new file mode 100644
index 000000000..97374f897
--- /dev/null
+++ b/target/linux/brcm63xx/files-2.6.30/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -0,0 +1,1003 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
+ * Copyright (C) 2009 Florian Fainelli <florian@openwrt.org>
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/ssb/ssb.h>
+#include <linux/gpio_buttons.h>
+#include <asm/addrspace.h>
+#include <bcm63xx_board.h>
+#include <bcm63xx_cpu.h>
+#include <bcm63xx_regs.h>
+#include <bcm63xx_io.h>
+#include <bcm63xx_board.h>
+#include <bcm63xx_dev_pci.h>
+#include <bcm63xx_dev_uart.h>
+#include <bcm63xx_dev_wdt.h>
+#include <bcm63xx_dev_enet.h>
+#include <bcm63xx_dev_dsp.h>
+#include <bcm63xx_dev_pcmcia.h>
+#include <bcm63xx_dev_usb_ohci.h>
+#include <bcm63xx_dev_usb_ehci.h>
+#include <bcm63xx_dev_usb_udc.h>
+#include <bcm63xx_dev_spi.h>
+#include <board_bcm963xx.h>
+#include <linux/input.h>
+
+#define PFX	"board_bcm963xx: "
+
+static struct bcm963xx_nvram nvram;
+static unsigned int mac_addr_used = 0;
+static struct board_info board;
+
+/*
+ * known 6338 boards
+ */
+
+#ifdef CONFIG_BCM63XX_CPU_6338
+static struct board_info __initdata board_96338gw = {
+	.name				= "96338GW",
+	.expected_cpu_id		= 0x6338,
+	
+	.has_enet0			= 1,
+	.enet0 = {
+		.force_speed_100	= 1,
+		.force_duplex_full	= 1,
+	},
+
+	.has_ohci0			= 1,
+
+	.leds = {
+		{
+			.name		= "adsl",
+			.gpio		= 3,
+			.active_low	= 1,
+		},
+		{
+			.name		= "ses",
+			.gpio		= 5,
+			.active_low	= 1,
+		},
+		{
+			.name		= "ppp-fail",
+			.gpio		= 4,
+			.active_low	= 1,
+		},
+		{
+			.name		= "power",
+			.gpio		= 0,
+			.active_low	= 1,
+			.default_trigger = "default-on",
+		},
+		{
+			.name		= "stop",
+			.gpio		= 1,
+			.active_low	= 1,
+		}
+	},
+};
+
+static struct board_info __initdata board_96338w = {
+	.name				= "96338W",
+	.expected_cpu_id		= 0x6338,
+	
+	.has_enet0			= 1,
+	.enet0 = {
+		.force_speed_100	= 1,
+		.force_duplex_full	= 1,
+	},
+
+	.leds = {
+		{
+			.name		= "adsl",
+			.gpio		= 3,
+			.active_low	= 1,
+		},
+		{
+			.name		= "ses",
+			.gpio		= 5,
+			.active_low	= 1,
+		},
+		{
+			.name		= "ppp-fail",
+			.gpio		= 4,
+			.active_low	= 1,
+		},
+		{
+			.name		= "power",
+			.gpio		= 0,
+			.active_low	= 1,
+			.default_trigger = "default-on",
+		},
+		{
+			.name		= "stop",
+			.gpio		= 1,
+			.active_low	= 1,
+		},
+	},
+};
+#endif
+
+/*
+ * known 6345 boards
+ */
+#ifdef CONFIG_BCM63XX_CPU_6345
+static struct board_info __initdata board_96345gw2 = {
+	.name				= "96345GW2",
+	.expected_cpu_id		= 0x6345,
+};
+#endif
+
+/*
+ * known 6348 boards
+ */
+#ifdef CONFIG_BCM63XX_CPU_6348
+static struct board_info __initdata board_96348r = {
+	.name				= "96348R",
+	.expected_cpu_id		= 0x6348,
+
+	.has_enet0			= 1,
+	.has_pci			= 1,
+
+	.enet0 = {
+		.has_phy		= 1,
+		.use_internal_phy	= 1,
+	},
+
+	.leds = {
+		{
+			.name		= "adsl-fail",
+			.gpio		= 2,
+			.active_low	= 1,
+		},
+		{
+			.name		= "ppp",
+			.gpio		= 3,
+			.active_low	= 1,
+		},
+		{
+			.name		= "ppp-fail",
+			.gpio		= 4,
+			.active_low	= 1,
+		},
+		{
+			.name		= "power",
+			.gpio		= 0,
+			.active_low	= 1,
+			.default_trigger = "default-on",
+			
+		},
+		{
+			.name		= "stop",
+			.gpio		= 1,
+			.active_low	= 1,
+		},
+	},
+};
+
+static struct board_info __initdata board_96348gw_10 = { 
+	.name				= "96348GW-10",
+	.expected_cpu_id		= 0x6348,
+	
+	.has_enet0			= 1,
+	.has_enet1			= 1,
+	.has_pci			= 1, 
+	
+	.enet0 = {
+		.has_phy		= 1,
+		.use_internal_phy	= 1,
+	},
+	.enet1 = {
+		.force_speed_100	= 1,
+		.force_duplex_full	= 1,
+	},
+	
+	.has_ohci0			= 1,
+	.has_pccard			= 1,
+	.has_ehci0			= 1,
+
+	.has_dsp			= 1,
+	.dsp = {
+		.gpio_rst		= 6,
+		.gpio_int		= 34,
+		.cs			= 2,
+		.ext_irq		= 2,
+	},
+	
+	.leds = {
+		{
+			.name		= "adsl-fail",
+			.gpio		= 2,
+			.active_low	= 1,
+		},
+		{
+			.name		= "ppp",
+			.gpio		= 3,
+			.active_low	= 1,
+		},
+		{
+			.name		= "ppp-fail",
+			.gpio		= 4,
+			.active_low	= 1,
+		},
+		{
+			.name		= "power",
+			.gpio		= 0,
+			.active_low	= 1,
+			.default_trigger = "default-on",
+		},
+		{
+			.name		= "stop",
+			.gpio		= 1,
+			.active_low	= 1,
+		},
+	},
+}; 
+
+static struct board_info __initdata board_96348gw_11 = {
+	.name				= "96348GW-11",
+	.expected_cpu_id		= 0x6348,
+
+	.has_enet0			= 1,
+	.has_enet1			= 1,
+	.has_pci			= 1,
+
+	.enet0 = {
+		.has_phy		= 1,
+		.use_internal_phy	= 1,
+	},
+
+	.enet1 = {
+		.force_speed_100	= 1,
+		.force_duplex_full	= 1,
+	},
+
+
+	.has_ohci0 = 1,
+	.has_pccard = 1,
+	.has_ehci0 = 1,
+	
+	.leds = {
+		{
+			.name		= "adsl-fail",
+			.gpio		= 2,
+			.active_low	= 1,
+		},
+		{
+			.name		= "ppp",
+			.gpio		= 3,
+			.active_low	= 1,
+		},
+		{
+			.name		= "ppp-fail",
+			.gpio		= 4,
+			.active_low	= 1,
+		},
+		{
+			.name		= "power",
+			.gpio		= 0,
+			.active_low	= 1,
+			.default_trigger = "default-on",
+		},
+		{
+			.name		= "stop",
+			.gpio		= 1,
+			.active_low	= 1,
+		},
+	},
+	.reset_buttons = {
+		{
+			.desc		= "reset",
+			.gpio		= 32,
+			.active_low	= 1,
+			.type	        = EV_KEY,
+			.code           = BTN_0,
+			.threshold      = 3,
+		},
+	},
+};
+
+static struct board_info __initdata board_96348gw = {
+	.name				= "96348GW",
+	.expected_cpu_id		= 0x6348,
+
+	.has_enet0			= 1,
+	.has_enet1			= 1,
+	.has_pci			= 1,
+
+	.enet0 = {
+		.has_phy		= 1,
+		.use_internal_phy	= 1,
+	},
+	.enet1 = {
+		.force_speed_100	= 1,
+		.force_duplex_full	= 1,
+	},
+
+	.has_ohci0			= 1,
+	.has_dsp			= 1,
+	
+	.dsp = {
+		.gpio_rst		= 6,
+		.gpio_int		= 34,
+		.ext_irq		= 2,
+		.cs			= 2,
+	},
+	
+	.leds = {
+		{
+			.name		= "adsl-fail",
+			.gpio		= 2,
+			.active_low	= 1,
+		},
+		{
+			.name		= "power",
+			.gpio		= 0,
+			.active_low	= 1,
+			.default_trigger = "default-on",
+		},
+		{
+			.name		= "stop",
+			.gpio		= 1,
+			.active_low	= 1,
+		},
+		{
+			.name		= "line1",
+			.gpio		= 4,
+			.active_low	= 1,
+		},
+		{
+			.name		= "line2",
+			.gpio		= 5,
+			.active_low	= 1,
+		},
+		{	.name		= "line3",
+			.gpio		= 6,
+			.active_low	= 1,
+		},
+		{
+			.name		= "tel",
+			.gpio		= 7,
+			.active_low	= 1,
+		},
+		{
+			.name		= "eth",
+			.gpio		= 35,
+			.active_low	= 1,
+		},
+	},
+	.reset_buttons = {
+		{
+			.desc		= "reset",
+			.gpio		= 36,
+			.active_low	= 1,
+			.type	        = EV_KEY,
+			.code           = BTN_0,
+			.threshold      = 3,
+		},
+	},	
+};
+
+static struct board_info __initdata board_FAST2404 = {
+        .name                           = "F@ST2404",
+        .expected_cpu_id                = 0x6348,
+
+        .has_enet0                      = 1,
+        .has_enet1                      = 1,
+        .has_pci                        = 1,
+
+        .enet0 = {
+                .has_phy                = 1,
+                .use_internal_phy       = 1,
+        },
+
+        .enet1 = {
+                .force_speed_100        = 1,
+                .force_duplex_full      = 1,
+        },
+
+
+        .has_ohci0 = 1,
+        .has_pccard = 1,
+        .has_ehci0 = 1,
+};
+
+static struct board_info __initdata board_DV201AMR = {
+	.name				= "DV201AMR",
+	.expected_cpu_id		= 0x6348,
+
+	.has_pci			= 1,
+	.has_ohci0			= 1,
+	.has_udc0			= 1,
+
+	.has_enet0			= 1,
+	.has_enet1			= 1,
+	.enet0 = {
+		.has_phy		= 1,
+		.use_internal_phy	= 1,
+	},
+	.enet1 = {
+		.force_speed_100	= 1,
+		.force_duplex_full	= 1,
+	},
+};
+
+static struct board_info __initdata board_96348gw_a = {
+	.name				= "96348GW-A",
+	.expected_cpu_id		= 0x6348,
+
+	.has_enet0			= 1,
+	.has_enet1			= 1,
+	.has_pci			= 1,
+
+	.enet0 = {
+		.has_phy		= 1,
+		.use_internal_phy	= 1,
+	},
+	.enet1 = {
+		.force_speed_100	= 1,
+		.force_duplex_full	= 1,
+	},
+
+	.has_ohci0 = 1,
+};
+
+static struct board_info __initdata board_rta1025w_16 = {
+	.name				= "RTA1025W_16",
+	.expected_cpu_id		= 0x6348,
+	
+	.has_enet0			= 1,
+	.has_enet1			= 1,
+	.has_pci			= 1,
+
+	.enet0 = {
+		.has_phy		= 1,
+		.use_internal_phy	= 1,
+	},
+	.enet1 = {
+		.force_speed_100	= 1,
+		.force_duplex_full	= 1,
+	},
+};
+#endif
+
+/*
+ * known 6358 boards
+ */
+#ifdef CONFIG_BCM63XX_CPU_6358
+static struct board_info __initdata board_96358vw = {
+	.name				= "96358VW",
+	.expected_cpu_id		= 0x6358,
+
+	.has_enet0			= 1,
+	.has_enet1			= 1,
+	.has_pci			= 1,
+
+	.enet0 = {
+		.has_phy		= 1,
+		.use_internal_phy	= 1,
+	},
+
+	.enet1 = {
+		.force_speed_100	= 1,
+		.force_duplex_full	= 1,
+	},
+
+
+	.has_ohci0 = 1,
+	.has_pccard = 1,
+	.has_ehci0 = 1,
+	
+	.leds = {
+		{
+			.name		= "adsl-fail",
+			.gpio		= 15,
+			.active_low	= 1,
+		},
+		{
+			.name		= "ppp",
+			.gpio		= 22,
+			.active_low	= 1,
+		},
+		{
+			.name		= "ppp-fail",
+			.gpio		= 23,
+			.active_low	= 1,
+		},
+		{
+			.name		= "power",
+			.gpio		= 4,
+			.default_trigger = "default-on",
+		},
+		{
+			.name		= "stop",
+			.gpio		= 5,
+		},
+	},
+};
+
+static struct board_info __initdata board_96358vw2 = {
+	.name				= "96358VW2",
+	.expected_cpu_id		= 0x6358,
+
+	.has_enet0			= 1,
+	.has_enet1			= 1,
+	.has_pci			= 1,
+
+	.enet0 = {
+		.has_phy		= 1,
+		.use_internal_phy	= 1,
+	},
+
+	.enet1 = {
+		.force_speed_100	= 1,
+		.force_duplex_full	= 1,
+	},
+
+
+	.has_ohci0 = 1,
+	.has_pccard = 1,
+	.has_ehci0 = 1,
+
+	.leds = {
+		{
+			.name		= "adsl",
+			.gpio		= 22,
+			.active_low	= 1,
+		},
+		{
+			.name		= "ppp-fail",
+			.gpio		= 23,
+		},
+		{
+			.name		= "power",
+			.gpio		= 5,
+			.active_low	= 1,
+			.default_trigger = "default-on",
+		},
+		{
+			.name		= "stop",
+			.gpio		= 4,
+			.active_low	= 1,
+		},
+	},
+};
+
+static struct board_info __initdata board_AGPFS0 = {
+	.name                           = "AGPF-S0",
+	.expected_cpu_id                = 0x6358,
+
+	.has_enet0                      = 1,
+	.has_enet1                      = 1,
+	.has_pci                        = 1,
+
+	.enet0 = {
+		.has_phy                = 1,
+		.use_internal_phy       = 1,
+	},
+
+	.enet1 = {
+		.force_speed_100        = 1,
+		.force_duplex_full      = 1,
+	},
+
+	.has_ohci0 = 1,
+	.has_ehci0 = 1,
+
+	.leds = {
+		/*Each led on alice gate is bi-color so final char */
+		/* is r for red and g for green leds */
+		{
+			.name		= "pwrr",
+			.gpio		= 5,
+			.active_low	= 1,
+		},
+		{
+			.name		= "pwrg",
+			.gpio		= 4,
+			.active_low	= 1,
+			.default_trigger = "default-on",
+		},
+		{
+			.name		= "wifir",
+			.gpio		= 23,
+			.active_low	= 1,
+		},
+		{
+			.name		= "wifig",
+			.gpio		= 22,
+			.active_low	= 1,
+		},
+		{
+			.name		= "usr1r",
+			.gpio		= 27,
+			.active_low	= 1,
+		},
+		{
+			.name		= "usr1g",
+			.gpio		= 26,
+			.active_low	= 1,
+		},
+		{
+			.name		= "usr2r",
+			.gpio		= 30,
+			.active_low	= 1,
+		},
+		{
+			.name		= "usr2g",
+			.gpio		= 29,
+			.active_low	= 1,
+		},
+	},
+
+	.reset_buttons = {
+		{
+			.desc		= "sw2",
+			.gpio		= 37,
+			.active_low	= 1,
+			.type	        = EV_KEY,
+			.code           = BTN_0,
+			.threshold      = 3,
+		},
+	},
+	/* sw1 is connected to gpio34*/
+};
+
+static struct board_info __initdata board_DWVS0 = {
+	.name                           = "DWV-S0",
+	.expected_cpu_id                = 0x6358,
+
+	.has_enet0                      = 1,
+	.has_enet1                      = 1,
+	.has_pci                        = 1,
+
+	.enet0 = {
+		.has_phy                = 1,
+		.use_internal_phy       = 1,
+	},
+
+	.enet1 = {
+		.force_speed_100        = 1,
+		.force_duplex_full      = 1,
+	},
+
+	.has_ohci0 = 1,
+};
+#endif
+
+/*
+ * all boards
+ */
+static const struct board_info __initdata *bcm963xx_boards[] = {
+#ifdef CONFIG_BCM63XX_CPU_6338
+	&board_96338gw,
+	&board_96338w,
+#endif
+#ifdef CONFIG_BCM63XX_CPU_6345
+	&board_96345gw2,
+#endif
+#ifdef CONFIG_BCM63XX_CPU_6348
+	&board_96348r,
+	&board_96348gw,
+	&board_96348gw_10,
+	&board_96348gw_11,
+	&board_FAST2404,
+	&board_DV201AMR,
+	&board_96348gw_a,
+	&board_rta1025w_16,
+#endif
+
+#ifdef CONFIG_BCM63XX_CPU_6358
+	&board_96358vw,
+	&board_96358vw2,
+	&board_AGPFS0,
+	&board_DWVS0,
+#endif
+};
+
+/*
+ * early init callback, read nvram data from flash and checksum it
+ */
+void __init board_prom_init(void)
+{
+	unsigned int check_len, i;
+	u8 *boot_addr, *cfe, *p;
+	char cfe_version[32];
+	u32 val;
+
+	/* read base address of boot chip select (0) 
+	 * 6345 does not have MPI but boots from standard
+	 * MIPS Flash address */
+	if (BCMCPU_IS_6345())
+		val = 0x1fc00000;
+	else {
+		val = bcm_mpi_readl(MPI_CSBASE_REG(0));
+		val &= MPI_CSBASE_BASE_MASK;
+	}
+	boot_addr = (u8 *)KSEG1ADDR(val);
+
+	/* dump cfe version */
+	cfe = boot_addr + BCM963XX_CFE_VERSION_OFFSET;
+	if (!memcmp(cfe, "cfe-v", 5))
+		snprintf(cfe_version, sizeof(cfe_version), "%u.%u.%u-%u.%u",
+			 cfe[5], cfe[6], cfe[7], cfe[8], cfe[9]);
+	else
+		strcpy(cfe_version, "unknown");
+	printk(KERN_INFO PFX "CFE version: %s\n", cfe_version);
+
+	/* extract nvram data */
+	memcpy(&nvram, boot_addr + BCM963XX_NVRAM_OFFSET, sizeof(nvram));
+
+	/* check checksum before using data */
+	if (nvram.version <= 4)
+		check_len = offsetof(struct bcm963xx_nvram, checksum_old);
+	else
+		check_len = sizeof(nvram);
+	val = 0;
+	p = (u8 *)&nvram;
+	while (check_len--)
+		val += *p;
+	if (val) {
+		printk(KERN_ERR PFX "invalid nvram checksum\n");
+		return;
+	}
+
+	/* find board by name */
+	for (i = 0; i < ARRAY_SIZE(bcm963xx_boards); i++) {
+		if (strncmp(nvram.name, bcm963xx_boards[i]->name,
+			    sizeof(nvram.name)))
+			continue;
+		/* copy, board desc array is marked initdata */
+		memcpy(&board, bcm963xx_boards[i], sizeof(board));
+		break;
+	}
+
+	/* bail out if board is not found, will complain later */
+	if (!board.name[0]) {
+		char name[17];
+		memcpy(name, nvram.name, 16);
+		name[16] = 0;
+		printk(KERN_ERR PFX "unknown bcm963xx board: %s\n",
+		       name);
+		return;
+	}
+
+	/* setup pin multiplexing depending on board enabled device,
+	 * this has to be done this early since PCI init is done
+	 * inside arch_initcall */
+	val = 0;
+#ifdef CONFIG_PCI
+	if (board.has_pci) {
+		bcm63xx_pci_enabled = 1;
+		if (BCMCPU_IS_6348())
+			val |= GPIO_MODE_6348_G2_PCI;
+	}
+#endif
+	if (board.has_pccard) {
+		if (BCMCPU_IS_6348())
+			val |= GPIO_MODE_6348_G1_MII_PCCARD;
+	}
+
+	if (board.has_enet0 && !board.enet0.use_internal_phy) {
+		if (BCMCPU_IS_6348())
+			val |= GPIO_MODE_6348_G3_EXT_MII |
+				GPIO_MODE_6348_G0_EXT_MII;
+	}
+
+	if (board.has_enet1 && !board.enet1.use_internal_phy) {
+		if (BCMCPU_IS_6348())
+			val |= GPIO_MODE_6348_G3_EXT_MII |
+				GPIO_MODE_6348_G0_EXT_MII;
+	}
+
+	bcm_gpio_writel(val, GPIO_MODE_REG);
+}
+
+/*
+ * second stage init callback, good time to panic if we couldn't
+ * identify on which board we're running since early printk is working
+ */
+void __init board_setup(void)
+{
+	if (!board.name[0])
+		panic("unable to detect bcm963xx board");
+	printk(KERN_INFO PFX "board name: %s\n", board.name);
+
+	/* make sure we're running on expected cpu */
+	if (bcm63xx_get_cpu_id() != board.expected_cpu_id)
+		panic("unexpected CPU for bcm963xx board");
+}
+
+/*
+ * return board name for /proc/cpuinfo
+ */
+const char *board_get_name(void)
+{
+	return board.name;
+}
+
+/*
+ * register & return a new board mac address
+ */
+static int board_get_mac_address(u8 *mac)
+{
+	u8 *p;
+	int count;
+
+	if (mac_addr_used >= nvram.mac_addr_count) {
+		printk(KERN_ERR PFX "not enough mac address\n");
+		return -ENODEV;
+	}
+
+	memcpy(mac, nvram.mac_addr_base, ETH_ALEN);
+	p = mac + ETH_ALEN - 1;
+	count = mac_addr_used;
+
+	while (count--) {
+		do {
+			(*p)++;
+			if (*p != 0)
+				break;
+			p--;
+		} while (p != mac);
+	}
+
+	if (p == mac) {
+		printk(KERN_ERR PFX "unable to fetch mac address\n");
+		return -ENODEV;
+	}
+
+	mac_addr_used++;
+	return 0;
+}
+
+static struct resource mtd_resources[] = {
+	{
+		.start		= 0,	/* filled at runtime */
+		.end		= 0,	/* filled at runtime */
+		.flags		= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device mtd_dev = {
+	.name			= "bcm963xx-flash",
+	.resource		= mtd_resources,
+	.num_resources		= ARRAY_SIZE(mtd_resources),
+};
+
+/*
+ * Register a sane SPROMv2 to make the on-board
+ * bcm4318 WLAN work
+ */
+static struct ssb_sprom bcm63xx_sprom = {
+	.revision		= 0x02,
+	.board_rev		= 0x17,
+	.country_code		= 0x0,
+	.ant_available_bg 	= 0x3,
+	.pa0b0			= 0x15ae,
+	.pa0b1			= 0xfa85,
+	.pa0b2			= 0xfe8d,
+	.pa1b0			= 0xffff,
+	.pa1b1			= 0xffff,
+	.pa1b2			= 0xffff,
+	.gpio0			= 0xff,
+	.gpio1			= 0xff,
+	.gpio2			= 0xff,
+	.gpio3			= 0xff,
+	.maxpwr_bg		= 0x004c,
+	.itssi_bg		= 0x00,
+	.boardflags_lo		= 0x2848,
+	.boardflags_hi		= 0x0000,
+};
+
+static struct resource gpiodev_resource = {
+	.start			= 0xFFFFFFFF,
+};
+
+static struct gpio_led_platform_data bcm63xx_led_data;
+
+static struct platform_device bcm63xx_gpio_leds = {
+	.name			= "leds-gpio",
+	.id			= 0,
+	.dev.platform_data	= &bcm63xx_led_data,
+};
+
+static struct gpio_buttons_platform_data bcm63xx_gpio_buttons_data = {
+	.poll_interval  = 20,
+};
+
+static struct platform_device bcm63xx_gpio_buttons_device = {
+        .name           = "gpio-buttons",
+        .id             = 0,
+        .dev.platform_data = &bcm63xx_gpio_buttons_data,
+};
+
+
+/*
+ * third stage init callback, register all board devices.
+ */
+int __init board_register_devices(void)
+{
+	u32 val;
+
+	bcm63xx_uart_register();
+	bcm63xx_wdt_register();
+
+	if (!BCMCPU_IS_6345())
+		bcm63xx_spi_register();
+
+	if (board.has_pccard)
+		bcm63xx_pcmcia_register();
+
+	if (board.has_enet0 &&
+	    !board_get_mac_address(board.enet0.mac_addr))
+		bcm63xx_enet_register(0, &board.enet0);
+
+	if (board.has_enet1 &&
+	    !board_get_mac_address(board.enet1.mac_addr))
+		bcm63xx_enet_register(1, &board.enet1);
+
+	if (board.has_ohci0)
+		bcm63xx_ohci_register();
+
+	if (board.has_ehci0)
+		bcm63xx_ehci_register();
+
+	if (board.has_udc0)
+		bcm63xx_udc_register();
+
+	if (board.has_dsp)
+		bcm63xx_dsp_register(&board.dsp);
+	
+	/* Generate MAC address for WLAN and
+	 * register our SPROM */
+#ifdef CONFIG_PCI
+	if (!board_get_mac_address(bcm63xx_sprom.il0mac)) {
+		memcpy(bcm63xx_sprom.et0mac, bcm63xx_sprom.il0mac, ETH_ALEN);
+		memcpy(bcm63xx_sprom.et1mac, bcm63xx_sprom.il0mac, ETH_ALEN);
+		if (ssb_arch_set_fallback_sprom(&bcm63xx_sprom) < 0)
+			printk(KERN_ERR "failed to register fallback SPROM\n");
+	}
+#endif
+
+	/* read base address of boot chip select (0) */
+	if (BCMCPU_IS_6345())
+		val = 0x1fc00000;
+	else {
+		val = bcm_mpi_readl(MPI_CSBASE_REG(0));
+		val &= MPI_CSBASE_BASE_MASK;
+	}
+	mtd_resources[0].start = val;
+	mtd_resources[0].end = 0x1FFFFFFF;
+
+	platform_device_register(&mtd_dev);
+
+	/* Register GPIODEV */
+	platform_device_register_simple("GPIODEV", 0, &gpiodev_resource, 1);
+
+	bcm63xx_led_data.num_leds = ARRAY_SIZE(board.leds);
+	bcm63xx_led_data.leds = board.leds;
+
+	platform_device_register(&bcm63xx_gpio_leds);
+
+	if (board.reset_buttons) {
+		bcm63xx_gpio_buttons_data.nbuttons = ARRAY_SIZE(board.reset_buttons);
+		bcm63xx_gpio_buttons_data.buttons = board.reset_buttons;
+
+		platform_device_register(&bcm63xx_gpio_buttons_device);
+	}
+
+	return 0;
+}
+
diff --git a/target/linux/brcm63xx/files-2.6.30/arch/mips/bcm63xx/boards/board_livebox.c b/target/linux/brcm63xx/files-2.6.30/arch/mips/bcm63xx/boards/board_livebox.c
new file mode 100644
index 000000000..06ca83b59
--- /dev/null
+++ b/target/linux/brcm63xx/files-2.6.30/arch/mips/bcm63xx/boards/board_livebox.c
@@ -0,0 +1,227 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2008 Florian Fainelli <florian@openwrt.org>
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <asm/addrspace.h>
+#include <bcm63xx_board.h>
+#include <bcm63xx_cpu.h>
+#include <bcm63xx_regs.h>
+#include <bcm63xx_io.h>
+#include <bcm63xx_board.h>
+#include <bcm63xx_dev_pci.h>
+#include <bcm63xx_dev_uart.h>
+#include <bcm63xx_dev_wdt.h>
+#include <bcm63xx_dev_enet.h>
+#include <bcm63xx_dev_pcmcia.h>
+#include <bcm63xx_dev_usb_ohci.h>
+#include <bcm63xx_dev_usb_ehci.h>
+#include <board_bcm963xx.h>
+
+#define PFX	"board_livebox: "
+
+static unsigned int mac_addr_used = 0;
+static struct board_info board;
+
+/*
+ * known 6348 boards
+ */
+#ifdef CONFIG_BCM63XX_CPU_6348
+static struct board_info __initdata board_livebox = {
+	.name				= "Livebox",
+	.expected_cpu_id		= 0x6348,
+
+	.has_enet0			= 1,
+	.has_enet1			= 1,
+	.has_pci			= 1,
+
+	.enet0 = {
+		.has_phy		= 1,
+		.use_internal_phy	= 1,
+	},
+
+	.enet1 = {
+		.force_speed_100	= 1,
+		.force_duplex_full	= 1,
+	},
+
+	.has_ohci0			= 1,
+	.has_pccard			= 1,
+	.has_ehci0			= 1,
+};
+#endif
+
+/*
+ * all boards
+ */
+static const struct board_info __initdata *bcm963xx_boards[] = {
+#ifdef CONFIG_BCM63XX_CPU_6348
+	&board_livebox
+#endif
+};
+
+/*
+ * early init callback
+ */
+void __init board_prom_init(void)
+{
+	u32 val;
+
+	/* read base address of boot chip select (0) */
+	val = bcm_mpi_readl(MPI_CSBASE_REG(0));
+	val &= MPI_CSBASE_BASE_MASK;
+
+	/* assume board is a Livebox */
+	memcpy(&board, bcm963xx_boards[0], sizeof(board));
+
+	/* setup pin multiplexing depending on board enabled device,
+	 * this has to be done this early since PCI init is done
+	 * inside arch_initcall */
+	val = 0;
+
+	if (board.has_pci) {
+		bcm63xx_pci_enabled = 1;
+		if (BCMCPU_IS_6348())
+			val |= GPIO_MODE_6348_G2_PCI;
+	}
+
+	if (board.has_pccard) {
+		if (BCMCPU_IS_6348())
+			val |= GPIO_MODE_6348_G1_MII_PCCARD;
+	}
+
+	if (board.has_enet0 && !board.enet0.use_internal_phy) {
+		if (BCMCPU_IS_6348())
+			val |= GPIO_MODE_6348_G3_EXT_MII |
+				GPIO_MODE_6348_G0_EXT_MII;
+	}
+
+	if (board.has_enet1 && !board.enet1.use_internal_phy) {
+		if (BCMCPU_IS_6348())
+			val |= GPIO_MODE_6348_G3_EXT_MII |
+				GPIO_MODE_6348_G0_EXT_MII;
+	}
+
+	bcm_gpio_writel(val, GPIO_MODE_REG);
+}
+
+/*
+ * second stage init callback, good time to panic if we couldn't
+ * identify on which board we're running since early printk is working
+ */
+void __init board_setup(void)
+{
+	if (!board.name[0])
+		panic("unable to detect bcm963xx board");
+	printk(KERN_INFO PFX "board name: %s\n", board.name);
+
+	/* make sure we're running on expected cpu */
+	if (bcm63xx_get_cpu_id() != board.expected_cpu_id)
+		panic("unexpected CPU for bcm963xx board");
+}
+
+/*
+ * return board name for /proc/cpuinfo
+ */
+const char *board_get_name(void)
+{
+	return board.name;
+}
+
+/*
+ * register & return a new board mac address
+ */
+
+static int board_get_mac_address(u8 *mac)
+{
+	u8 default_mac[ETH_ALEN] = {0x00, 0x07, 0x3A, 0x00, 0x00, 0x00};
+	u8 *p;
+	int count;
+
+	memcpy(mac, default_mac, ETH_ALEN);
+
+	p = mac + ETH_ALEN - 1;
+	count = mac_addr_used;
+
+	while (count--) {
+		do {
+			(*p)++;
+			if (*p != 0)
+				break;
+			p--;
+		} while (p != mac);
+	}
+
+	if (p == mac) {
+		printk(KERN_ERR PFX "unable to fetch mac address\n");
+		return -ENODEV;
+	}
+        mac_addr_used++;
+
+	return 0;
+}
+
+static struct resource mtd_resources[] = {
+	{
+		.start          = 0,    /* filled at runtime */
+		.end            = 0,    /* filled at runtime */
+		.flags          = IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device mtd_dev = {
+	.name                   = "bcm963xx-flash",
+	.resource               = mtd_resources,
+	.num_resources          = ARRAY_SIZE(mtd_resources),
+};
+
+
+/*
+ * third stage init callback, register all board devices.
+ */
+int __init board_register_devices(void)
+{
+	u32 val;
+
+	bcm63xx_uart_register();
+	bcm63xx_wdt_register();
+
+	if (board.has_pccard)
+		bcm63xx_pcmcia_register();
+
+	if (board.has_enet0 &&
+	    !board_get_mac_address(board.enet0.mac_addr))
+		bcm63xx_enet_register(0, &board.enet0);
+
+	if (board.has_enet1 &&
+	    !board_get_mac_address(board.enet1.mac_addr))
+		bcm63xx_enet_register(1, &board.enet1);
+
+	if (board.has_ohci0)
+		bcm63xx_ohci_register();
+
+	if (board.has_ehci0)
+		bcm63xx_ehci_register();
+
+
+	/* read base address of boot chip select (0) */
+	val = bcm_mpi_readl(MPI_CSBASE_REG(0));
+	val &= MPI_CSBASE_BASE_MASK;
+	mtd_resources[0].start = val;
+	mtd_resources[0].end = 0x1FFFFFFF;
+	
+	platform_device_register(&mtd_dev);
+
+	return 0;
+}
+