update brcm-2.4 to 2.4.35.4, integrate new broadcom system code, update broadcom-wl to a contributed version (v4.150.10.5) - no bcm57xx support yet, will follow shortly

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10137 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 0 insertions, 433 deletions

diff --git a/target/linux/brcm-2.4/files/arch/mips/bcm947xx/include/bcmutils.h b/target/linux/brcm-2.4/files/arch/mips/bcm947xx/include/bcmutils.h
deleted file mode 100644
index b200f6236..000000000
--- a/target/linux/brcm-2.4/files/arch/mips/bcm947xx/include/bcmutils.h
+++ /dev/null
@@ -1,433 +0,0 @@
-/*
- * Misc useful os-independent macros and functions.
- *
- * Copyright 2006, Broadcom Corporation
- * All Rights Reserved.
- * 
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- * $Id: bcmutils.h,v 1.1.1.16 2006/04/08 06:13:39 honor Exp $
- */
-
-#ifndef	_bcmutils_h_
-#define	_bcmutils_h_
-
-/* ** driver-only section ** */
-#ifdef BCMDRIVER
-
-#define _BCM_U	0x01	/* upper */
-#define _BCM_L	0x02	/* lower */
-#define _BCM_D	0x04	/* digit */
-#define _BCM_C	0x08	/* cntrl */
-#define _BCM_P	0x10	/* punct */
-#define _BCM_S	0x20	/* white space (space/lf/tab) */
-#define _BCM_X	0x40	/* hex digit */
-#define _BCM_SP	0x80	/* hard space (0x20) */
-
-#define GPIO_PIN_NOTDEFINED 	0x20	/* Pin not defined */
-
-extern unsigned char bcm_ctype[];
-#define bcm_ismask(x) (bcm_ctype[(int)(unsigned char)(x)])
-
-#define bcm_isalnum(c)	((bcm_ismask(c)&(_BCM_U|_BCM_L|_BCM_D)) != 0)
-#define bcm_isalpha(c)	((bcm_ismask(c)&(_BCM_U|_BCM_L)) != 0)
-#define bcm_iscntrl(c)	((bcm_ismask(c)&(_BCM_C)) != 0)
-#define bcm_isdigit(c)	((bcm_ismask(c)&(_BCM_D)) != 0)
-#define bcm_isgraph(c)	((bcm_ismask(c)&(_BCM_P|_BCM_U|_BCM_L|_BCM_D)) != 0)
-#define bcm_islower(c)	((bcm_ismask(c)&(_BCM_L)) != 0)
-#define bcm_isprint(c)	((bcm_ismask(c)&(_BCM_P|_BCM_U|_BCM_L|_BCM_D|_BCM_SP)) != 0)
-#define bcm_ispunct(c)	((bcm_ismask(c)&(_BCM_P)) != 0)
-#define bcm_isspace(c)	((bcm_ismask(c)&(_BCM_S)) != 0)
-#define bcm_isupper(c)	((bcm_ismask(c)&(_BCM_U)) != 0)
-#define bcm_isxdigit(c)	((bcm_ismask(c)&(_BCM_D|_BCM_X)) != 0)
-
-/*
- * Spin at most 'us' microseconds while 'exp' is true.
- * Caller should explicitly test 'exp' when this completes
- * and take appropriate error action if 'exp' is still true.
- */
-#define SPINWAIT(exp, us) { \
-	uint countdown = (us) + 9; \
-	while ((exp) && (countdown >= 10)) {\
-		OSL_DELAY(10); \
-		countdown -= 10; \
-	} \
-}
-
-struct  ether_addr {
-	uint8 octet[6];
-} __attribute__((packed));
-
-/* string */
-extern uchar bcm_toupper(uchar c);
-extern ulong bcm_strtoul(char *cp, char **endp, uint base);
-extern char *bcmstrstr(char *haystack, char *needle);
-extern char *bcmstrcat(char *dest, const char *src);
-extern ulong wchar2ascii(char *abuf, ushort *wbuf, ushort wbuflen, ulong abuflen);
-/* ethernet address */
-extern char *bcm_ether_ntoa(struct ether_addr *ea, char *buf);
-/* variable access */
-extern char *getvar(char *vars, char *name);
-extern int getintvar(char *vars, char *name);
-extern uint getgpiopin(char *vars, char *pin_name, uint def_pin);
-#ifdef BCMPERFSTATS
-extern void bcm_perf_enable(void);
-extern void bcmstats(char *fmt);
-extern void bcmlog(char *fmt, uint a1, uint a2);
-extern void bcmdumplog(char *buf, int size);
-extern int bcmdumplogent(char *buf, uint idx);
-#else
-#define bcm_perf_enable()
-#define bcmstats(fmt)
-#define	bcmlog(fmt, a1, a2)
-#define	bcmdumplog(buf, size)	*buf = '\0'
-#define	bcmdumplogent(buf, idx)	-1
-#endif /* BCMPERFSTATS */
-extern char *bcm_nvram_vars(uint *length);
-extern int bcm_nvram_cache(void *sbh);
-
-/* Support for sharing code across in-driver iovar implementations.
- * The intent is that a driver use this structure to map iovar names
- * to its (private) iovar identifiers, and the lookup function to
- * find the entry.  Macros are provided to map ids and get/set actions
- * into a single number space for a switch statement.
- */
-
-/* iovar structure */
-typedef struct bcm_iovar {
-	const char *name;	/* name for lookup and display */
-	uint16 varid;		/* id for switch */
-	uint16 flags;		/* driver-specific flag bits */
-	uint16 type;		/* base type of argument */
-	uint16 minlen;		/* min length for buffer vars */
-} bcm_iovar_t;
-
-/* varid definitions are per-driver, may use these get/set bits */
-
-/* IOVar action bits for id mapping */
-#define IOV_GET 0 /* Get an iovar */
-#define IOV_SET 1 /* Set an iovar */
-
-/* Varid to actionid mapping */
-#define IOV_GVAL(id)		((id)*2)
-#define IOV_SVAL(id)		(((id)*2)+IOV_SET)
-#define IOV_ISSET(actionid)	((actionid & IOV_SET) == IOV_SET)
-
-/* flags are per-driver based on driver attributes */
-
-/* Base type definitions */
-#define IOVT_VOID	0	/* no value (implictly set only) */
-#define IOVT_BOOL	1	/* any value ok (zero/nonzero) */
-#define IOVT_INT8	2	/* integer values are range-checked */
-#define IOVT_UINT8	3	/* unsigned int 8 bits */
-#define IOVT_INT16	4	/* int 16 bits */
-#define IOVT_UINT16	5	/* unsigned int 16 bits */
-#define IOVT_INT32	6	/* int 32 bits */
-#define IOVT_UINT32	7	/* unsigned int 32 bits */
-#define IOVT_BUFFER	8	/* buffer is size-checked as per minlen */
-
-extern const bcm_iovar_t *bcm_iovar_lookup(const bcm_iovar_t *table, const char *name);
-extern int bcm_iovar_lencheck(const bcm_iovar_t *table, void *arg, int len, bool set);
-
-#endif	/* #ifdef BCMDRIVER */
-
-/* ** driver/apps-shared section ** */
-
-#define BCME_STRLEN 		64	/* Max string length for BCM errors */
-#define VALID_BCMERROR(e)  ((e <= 0) && (e >= BCME_LAST))
-
-
-/*
- * error codes could be added but the defined ones shouldn't be changed/deleted
- * these error codes are exposed to the user code
- * when ever a new error code is added to this list
- * please update errorstring table with the related error string and
- * update osl files with os specific errorcode map
-*/
-
-#define BCME_OK				0	/* Success */
-#define BCME_ERROR			-1	/* Error generic */
-#define BCME_BADARG			-2	/* Bad Argument */
-#define BCME_BADOPTION			-3	/* Bad option */
-#define BCME_NOTUP			-4	/* Not up */
-#define BCME_NOTDOWN			-5	/* Not down */
-#define BCME_NOTAP			-6	/* Not AP */
-#define BCME_NOTSTA			-7	/* Not STA  */
-#define BCME_BADKEYIDX			-8	/* BAD Key Index */
-#define BCME_RADIOOFF 			-9	/* Radio Off */
-#define BCME_NOTBANDLOCKED		-10	/* Not  band locked */
-#define BCME_NOCLK			-11	/* No Clock */
-#define BCME_BADRATESET			-12	/* BAD Rate valueset */
-#define BCME_BADBAND			-13	/* BAD Band */
-#define BCME_BUFTOOSHORT		-14	/* Buffer too short */
-#define BCME_BUFTOOLONG			-15	/* Buffer too long */
-#define BCME_BUSY			-16	/* Busy */
-#define BCME_NOTASSOCIATED		-17	/* Not Associated */
-#define BCME_BADSSIDLEN			-18	/* Bad SSID len */
-#define BCME_OUTOFRANGECHAN		-19	/* Out of Range Channel */
-#define BCME_BADCHAN			-20	/* Bad Channel */
-#define BCME_BADADDR			-21	/* Bad Address */
-#define BCME_NORESOURCE			-22	/* Not Enough Resources */
-#define BCME_UNSUPPORTED		-23	/* Unsupported */
-#define BCME_BADLEN			-24	/* Bad length */
-#define BCME_NOTREADY			-25	/* Not Ready */
-#define BCME_EPERM			-26	/* Not Permitted */
-#define BCME_NOMEM			-27	/* No Memory */
-#define BCME_ASSOCIATED			-28	/* Associated */
-#define BCME_RANGE			-29	/* Not In Range */
-#define BCME_NOTFOUND			-30	/* Not Found */
-#define BCME_WME_NOT_ENABLED		-31	/* WME Not Enabled */
-#define BCME_TSPEC_NOTFOUND		-32	/* TSPEC Not Found */
-#define BCME_ACM_NOTSUPPORTED		-33	/* ACM Not Supported */
-#define BCME_NOT_WME_ASSOCIATION	-34	/* Not WME Association */
-#define BCME_SDIO_ERROR			-35	/* SDIO Bus Error */
-#define BCME_DONGLE_DOWN		-36	/* Dongle Not Accessible */
-#define BCME_LAST			BCME_DONGLE_DOWN
-
-/* These are collection of BCME Error strings */
-#define BCMERRSTRINGTABLE {		\
-	"OK",				\
-	"Undefined error",		\
-	"Bad Argument",			\
-	"Bad Option",			\
-	"Not up",			\
-	"Not down",			\
-	"Not AP",			\
-	"Not STA",			\
-	"Bad Key Index",		\
-	"Radio Off",			\
-	"Not band locked",		\
-	"No clock",			\
-	"Bad Rate valueset",		\
-	"Bad Band",			\
-	"Buffer too short",		\
-	"Buffer too long",		\
-	"Busy",				\
-	"Not Associated",		\
-	"Bad SSID len",			\
-	"Out of Range Channel",		\
-	"Bad Channel",			\
-	"Bad Address",			\
-	"Not Enough Resources",		\
-	"Unsupported",			\
-	"Bad length",			\
-	"Not Ready",			\
-	"Not Permitted",		\
-	"No Memory",			\
-	"Associated",			\
-	"Not In Range",			\
-	"Not Found",			\
-	"WME Not Enabled",		\
-	"TSPEC Not Found",		\
-	"ACM Not Supported",		\
-	"Not WME Association",		\
-	"SDIO Bus Error",		\
-	"Dongle Not Accessible"		\
-}
-
-#ifndef ABS
-#define	ABS(a)			(((a) < 0)?-(a):(a))
-#endif /* ABS */
-
-#ifndef MIN
-#define	MIN(a, b)		(((a) < (b))?(a):(b))
-#endif /* MIN */
-
-#ifndef MAX
-#define	MAX(a, b)		(((a) > (b))?(a):(b))
-#endif /* MAX */
-
-#define CEIL(x, y)		(((x) + ((y)-1)) / (y))
-#define	ROUNDUP(x, y)		((((x)+((y)-1))/(y))*(y))
-#define	ISALIGNED(a, x)		(((a) & ((x)-1)) == 0)
-#define	ISPOWEROF2(x)		((((x)-1)&(x)) == 0)
-#define VALID_MASK(mask)	!((mask) & ((mask) + 1))
-#define	OFFSETOF(type, member)	((uint)(uintptr)&((type *)0)->member)
-#define ARRAYSIZE(a)		(sizeof(a)/sizeof(a[0]))
-
-/* bit map related macros */
-#ifndef setbit
-#ifndef NBBY		    /* the BSD family defines NBBY */
-#define	NBBY	8	/* 8 bits per byte */
-#endif /* #ifndef NBBY */
-#define	setbit(a, i)	(((uint8 *)a)[(i)/NBBY] |= 1<<((i)%NBBY))
-#define	clrbit(a, i)	(((uint8 *)a)[(i)/NBBY] &= ~(1<<((i)%NBBY)))
-#define	isset(a, i)	(((uint8 *)a)[(i)/NBBY] & (1<<((i)%NBBY)))
-#define	isclr(a, i)	((((uint8 *)a)[(i)/NBBY] & (1<<((i)%NBBY))) == 0)
-#endif /* setbit */
-
-#define	NBITS(type)	(sizeof(type) * 8)
-#define NBITVAL(nbits)	(1 << (nbits))
-#define MAXBITVAL(nbits)	((1 << (nbits)) - 1)
-#define	NBITMASK(nbits)	MAXBITVAL(nbits)
-#define MAXNBVAL(nbyte)	MAXBITVAL((nbyte) * 8)
-
-/* basic mux operation - can be optimized on several architectures */
-#define MUX(pred, true, false) ((pred) ? (true) : (false))
-
-/* modulo inc/dec - assumes x E [0, bound - 1] */
-#define MODDEC(x, bound) MUX((x) == 0, (bound) - 1, (x) - 1)
-#define MODINC(x, bound) MUX((x) == (bound) - 1, 0, (x) + 1)
-
-/* modulo inc/dec, bound = 2^k */
-#define MODDEC_POW2(x, bound) (((x) - 1) & ((bound) - 1))
-#define MODINC_POW2(x, bound) (((x) + 1) & ((bound) - 1))
-
-/* modulo add/sub - assumes x, y E [0, bound - 1] */
-#define MODADD(x, y, bound) \
-    MUX((x) + (y) >= (bound), (x) + (y) - (bound), (x) + (y))
-#define MODSUB(x, y, bound) \
-    MUX(((int)(x)) - ((int)(y)) < 0, (x) - (y) + (bound), (x) - (y))
-
-/* module add/sub, bound = 2^k */
-#define MODADD_POW2(x, y, bound) (((x) + (y)) & ((bound) - 1))
-#define MODSUB_POW2(x, y, bound) (((x) - (y)) & ((bound) - 1))
-
-/* crc defines */
-#define CRC8_INIT_VALUE  0xff		/* Initial CRC8 checksum value */
-#define CRC8_GOOD_VALUE  0x9f		/* Good final CRC8 checksum value */
-#define CRC16_INIT_VALUE 0xffff		/* Initial CRC16 checksum value */
-#define CRC16_GOOD_VALUE 0xf0b8		/* Good final CRC16 checksum value */
-#define CRC32_INIT_VALUE 0xffffffff	/* Initial CRC32 checksum value */
-#define CRC32_GOOD_VALUE 0xdebb20e3	/* Good final CRC32 checksum value */
-
-/* bcm_format_flags() bit description structure */
-typedef struct bcm_bit_desc {
-	uint32	bit;
-	char*	name;
-} bcm_bit_desc_t;
-
-/* tag_ID/length/value_buffer tuple */
-typedef struct bcm_tlv {
-	uint8	id;
-	uint8	len;
-	uint8	data[1];
-} bcm_tlv_t;
-
-/* Check that bcm_tlv_t fits into the given buflen */
-#define bcm_valid_tlv(elt, buflen) ((buflen) >= 2 && (int)(buflen) >= (int)(2 + (elt)->len))
-
-/* buffer length for ethernet address from bcm_ether_ntoa() */
-#define ETHER_ADDR_STR_LEN	18	/* 18-bytes of Ethernet address buffer length */
-
-/* unaligned load and store macros */
-#ifdef IL_BIGENDIAN
-static INLINE uint32
-load32_ua(uint8 *a)
-{
-	return ((a[0] << 24) | (a[1] << 16) | (a[2] << 8) | a[3]);
-}
-
-static INLINE void
-store32_ua(uint8 *a, uint32 v)
-{
-	a[0] = (v >> 24) & 0xff;
-	a[1] = (v >> 16) & 0xff;
-	a[2] = (v >> 8) & 0xff;
-	a[3] = v & 0xff;
-}
-
-static INLINE uint16
-load16_ua(uint8 *a)
-{
-	return ((a[0] << 8) | a[1]);
-}
-
-static INLINE void
-store16_ua(uint8 *a, uint16 v)
-{
-	a[0] = (v >> 8) & 0xff;
-	a[1] = v & 0xff;
-}
-
-#else
-
-static INLINE uint32
-load32_ua(uint8 *a)
-{
-	return ((a[3] << 24) | (a[2] << 16) | (a[1] << 8) | a[0]);
-}
-
-static INLINE void
-store32_ua(uint8 *a, uint32 v)
-{
-	a[3] = (v >> 24) & 0xff;
-	a[2] = (v >> 16) & 0xff;
-	a[1] = (v >> 8) & 0xff;
-	a[0] = v & 0xff;
-}
-
-static INLINE uint16
-load16_ua(uint8 *a)
-{
-	return ((a[1] << 8) | a[0]);
-}
-
-static INLINE void
-store16_ua(uint8 *a, uint16 v)
-{
-	a[1] = (v >> 8) & 0xff;
-	a[0] = v & 0xff;
-}
-
-#endif /* IL_BIGENDIAN */
-
-/* externs */
-/* crc */
-extern uint8 hndcrc8(uint8 *p, uint nbytes, uint8 crc);
-extern uint16 hndcrc16(uint8 *p, uint nbytes, uint16 crc);
-extern uint32 hndcrc32(uint8 *p, uint nbytes, uint32 crc);
-/* format/print */
-extern void printfbig(char *buf);
-
-/* IE parsing */
-extern bcm_tlv_t *bcm_next_tlv(bcm_tlv_t *elt, int *buflen);
-extern bcm_tlv_t *bcm_parse_tlvs(void *buf, int buflen, uint key);
-extern bcm_tlv_t *bcm_parse_ordered_tlvs(void *buf, int buflen, uint key);
-
-/* bcmerror */
-extern const char *bcmerrorstr(int bcmerror);
-
-/* multi-bool data type: set of bools, mbool is true if any is set */
-typedef uint32 mbool;
-#define mboolset(mb, bit)		(mb |= bit)		/* set one bool */
-#define mboolclr(mb, bit)		(mb &= ~bit)		/* clear one bool */
-#define mboolisset(mb, bit)		((mb & bit) != 0)	/* TRUE if one bool is set */
-#define	mboolmaskset(mb, mask, val)	((mb) = (((mb) & ~(mask)) | (val)))
-
-/* power conversion */
-extern uint16 bcm_qdbm_to_mw(uint8 qdbm);
-extern uint8 bcm_mw_to_qdbm(uint16 mw);
-
-/* generic datastruct to help dump routines */
-struct fielddesc {
-	char 	*nameandfmt;
-	uint32 	offset;
-	uint32 	len;
-};
-
-/* Buffer structure for collecting string-formatted data 
-* using bcm_bprintf() API.
-* Use bcm_binit() to initialize before use
-*/
-struct bcmstrbuf
-{
-	char *buf;	/* pointer to current position in origbuf */
-	uint size;	/* current (residual) size in bytes */
-	char *origbuf;	/* unmodified pointer to orignal buffer */
-	uint origsize;	/* unmodified orignal buffer size in bytes */
-};
-
-extern void bcm_binit(struct bcmstrbuf *b, char *buf, uint size);
-extern int bcm_bprintf(struct bcmstrbuf *b, const char *fmt, ...);
-
-typedef  uint32 (*readreg_rtn)(void *arg0, void *arg1, uint32 offset);
-extern uint bcmdumpfields(readreg_rtn func_ptr, void *arg0, void *arg1, struct fielddesc *str,
-                          char *buf, uint32 bufsize);
-
-extern uint bcm_mkiovar(char *name, char *data, uint datalen, char *buf, uint len);
-extern uint bcm_bitcount(uint8 *bitmap, uint bytelength);
-
-#endif	/* _bcmutils_h_ */