ar71xx: add 2.6.34 preliminary support (patches)

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20141 3c298f89-4303-0410-b956-a3cf2f4a3e73

32 files changed, 1136 insertions, 0 deletions

diff --git a/target/linux/ar71xx/patches-2.6.34/001-ar71xx_core.patch b/target/linux/ar71xx/patches-2.6.34/001-ar71xx_core.patch
new file mode 100644
index 000000000..5b322d68f
--- /dev/null
+++ b/target/linux/ar71xx/patches-2.6.34/001-ar71xx_core.patch
@@ -0,0 +1,50 @@
+--- a/arch/mips/Makefile
++++ b/arch/mips/Makefile
+@@ -637,6 +637,13 @@ else
+ load-$(CONFIG_CPU_CAVIUM_OCTEON) 	+= 0xffffffff81100000
+ endif
+ 
++#
++# Atheros AR71xx
++#
++core-$(CONFIG_ATHEROS_AR71XX)	+= arch/mips/ar71xx/
++cflags-$(CONFIG_ATHEROS_AR71XX)	+= -I$(srctree)/arch/mips/include/asm/mach-ar71xx
++load-$(CONFIG_ATHEROS_AR71XX)	+= 0xffffffff80060000
++
+ # temporary until string.h is fixed
+ cflags-y += -ffreestanding
+ 
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -48,6 +48,23 @@ config AR7
+ 	  Support for the Texas Instruments AR7 System-on-a-Chip
+ 	  family: TNETD7100, 7200 and 7300.
+ 
++config ATHEROS_AR71XX
++	bool "Atheros AR71xx based boards"
++	select CEVT_R4K
++	select CSRC_R4K
++	select DMA_NONCOHERENT
++	select HW_HAS_PCI
++	select IRQ_CPU
++	select ARCH_REQUIRE_GPIOLIB
++	select SYS_HAS_CPU_MIPS32_R1
++	select SYS_HAS_CPU_MIPS32_R2
++	select SYS_SUPPORTS_32BIT_KERNEL
++	select SYS_SUPPORTS_BIG_ENDIAN
++	select SYS_HAS_EARLY_PRINTK
++	select MIPS_MACHINE
++	help
++	  Support for Atheros AR71xx based boards.
++
+ config BCM47XX
+ 	bool "BCM47XX based boards"
+ 	select CEVT_R4K
+@@ -682,6 +699,7 @@ config CAVIUM_OCTEON_REFERENCE_BOARD
+ endchoice
+ 
+ source "arch/mips/alchemy/Kconfig"
++source "arch/mips/ar71xx/Kconfig"
+ source "arch/mips/bcm63xx/Kconfig"
+ source "arch/mips/jazz/Kconfig"
+ source "arch/mips/lasat/Kconfig"
diff --git a/target/linux/ar71xx/patches-2.6.34/002-ar71xx_pci.patch b/target/linux/ar71xx/patches-2.6.34/002-ar71xx_pci.patch
new file mode 100644
index 000000000..3facce9d7
--- /dev/null
+++ b/target/linux/ar71xx/patches-2.6.34/002-ar71xx_pci.patch
@@ -0,0 +1,10 @@
+--- a/arch/mips/pci/Makefile
++++ b/arch/mips/pci/Makefile
+@@ -18,6 +18,7 @@ obj-$(CONFIG_PCI_TX4927)	+= ops-tx4927.o
+ obj-$(CONFIG_BCM47XX)		+= pci-bcm47xx.o
+ obj-$(CONFIG_BCM63XX)		+= pci-bcm63xx.o fixup-bcm63xx.o \
+ 					ops-bcm63xx.o
++obj-$(CONFIG_ATHEROS_AR71XX)	+= pci-ar71xx.o pci-ar724x.o
+ 
+ #
+ # These are still pretty much in the old state, watch, go blind.
diff --git a/target/linux/ar71xx/patches-2.6.34/003-ar71xx_usb_host.patch b/target/linux/ar71xx/patches-2.6.34/003-ar71xx_usb_host.patch
new file mode 100644
index 000000000..238a79c9b
--- /dev/null
+++ b/target/linux/ar71xx/patches-2.6.34/003-ar71xx_usb_host.patch
@@ -0,0 +1,58 @@
+--- a/drivers/usb/host/Kconfig
++++ b/drivers/usb/host/Kconfig
+@@ -109,6 +109,13 @@ config XPS_USB_HCD_XILINX
+ 		support both high speed and full speed devices, or high speed
+ 		devices only.
+ 
++config USB_EHCI_AR71XX
++	bool "USB EHCI support for AR71xx"
++	depends on USB_EHCI_HCD && ATHEROS_AR71XX
++	default y
++	help
++	  Support for Atheros AR71xx built-in EHCI controller
++
+ config USB_EHCI_FSL
+ 	bool "Support for Freescale on-chip EHCI USB controller"
+ 	depends on USB_EHCI_HCD && FSL_SOC
+@@ -207,6 +214,13 @@ config USB_OHCI_HCD
+ 	  To compile this driver as a module, choose M here: the
+ 	  module will be called ohci-hcd.
+ 
++config USB_OHCI_AR71XX
++	bool "USB OHCI support for Atheros AR71xx"
++	depends on USB_OHCI_HCD && ATHEROS_AR71XX
++	default y
++	help
++	  Support for Atheros AR71xx built-in OHCI controller
++
+ config USB_OHCI_HCD_PPC_SOC
+ 	bool "OHCI support for on-chip PPC USB controller"
+ 	depends on USB_OHCI_HCD && (STB03xxx || PPC_MPC52xx)
+--- a/drivers/usb/host/ehci-hcd.c
++++ b/drivers/usb/host/ehci-hcd.c
+@@ -1158,6 +1158,11 @@ MODULE_LICENSE ("GPL");
+ #define	PLATFORM_DRIVER		ehci_atmel_driver
+ #endif
+ 
++#ifdef CONFIG_USB_EHCI_AR71XX
++#include "ehci-ar71xx.c"
++#define PLATFORM_DRIVER		ehci_ar71xx_driver
++#endif
++
+ #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \
+     !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER)
+ #error "missing bus glue for ehci-hcd"
+--- a/drivers/usb/host/ohci-hcd.c
++++ b/drivers/usb/host/ohci-hcd.c
+@@ -1085,6 +1085,11 @@ MODULE_LICENSE ("GPL");
+ #define TMIO_OHCI_DRIVER	ohci_hcd_tmio_driver
+ #endif
+ 
++#ifdef CONFIG_USB_OHCI_AR71XX
++#include "ohci-ar71xx.c"
++#define PLATFORM_DRIVER		ohci_hcd_ar71xx_driver
++#endif
++
+ #if	!defined(PCI_DRIVER) &&		\
+ 	!defined(PLATFORM_DRIVER) &&	\
+ 	!defined(OF_PLATFORM_DRIVER) &&	\
diff --git a/target/linux/ar71xx/patches-2.6.34/004-ar71xx_spi_controller.patch b/target/linux/ar71xx/patches-2.6.34/004-ar71xx_spi_controller.patch
new file mode 100644
index 000000000..9c196e077
--- /dev/null
+++ b/target/linux/ar71xx/patches-2.6.34/004-ar71xx_spi_controller.patch
@@ -0,0 +1,26 @@
+--- a/drivers/spi/Kconfig
++++ b/drivers/spi/Kconfig
+@@ -53,6 +53,13 @@ if SPI_MASTER
+ 
+ comment "SPI Master Controller Drivers"
+ 
++config SPI_AR71XX
++	tristate "Atheros AR71xx SPI Controller"
++	depends on SPI_MASTER && ATHEROS_AR71XX
++	select SPI_BITBANG
++	help
++	  This is the SPI contoller driver for Atheros AR71xx.
++
+ config SPI_ATMEL
+ 	tristate "Atmel SPI Controller"
+ 	depends on (ARCH_AT91 || AVR32)
+--- a/drivers/spi/Makefile
++++ b/drivers/spi/Makefile
+@@ -11,6 +11,7 @@ endif
+ obj-$(CONFIG_SPI_MASTER)		+= spi.o
+ 
+ # SPI master controller drivers (bus)
++obj-$(CONFIG_SPI_AR71XX)		+= ar71xx_spi.o
+ obj-$(CONFIG_SPI_ATMEL)			+= atmel_spi.o
+ obj-$(CONFIG_SPI_BFIN)			+= spi_bfin5xx.o
+ obj-$(CONFIG_SPI_BITBANG)		+= spi_bitbang.o
diff --git a/target/linux/ar71xx/patches-2.6.34/005-ar71xx_mac_driver.patch b/target/linux/ar71xx/patches-2.6.34/005-ar71xx_mac_driver.patch
new file mode 100644
index 000000000..3721a9b86
--- /dev/null
+++ b/target/linux/ar71xx/patches-2.6.34/005-ar71xx_mac_driver.patch
@@ -0,0 +1,21 @@
+--- a/drivers/net/Kconfig
++++ b/drivers/net/Kconfig
+@@ -2128,6 +2128,8 @@ config ACENIC_OMIT_TIGON_I
+ 
+ 	  The safe and default value for this is N.
+ 
++source drivers/net/ag71xx/Kconfig
++
+ config DL2K
+ 	tristate "DL2000/TC902x-based Gigabit Ethernet support"
+ 	depends on PCI
+--- a/drivers/net/Makefile
++++ b/drivers/net/Makefile
+@@ -106,6 +106,7 @@ obj-$(CONFIG_STMMAC_ETH) += stmmac/
+ # end link order section
+ #
+ 
++obj-$(CONFIG_AG71XX) += ag71xx/
+ obj-$(CONFIG_SUNDANCE) += sundance.o
+ obj-$(CONFIG_HAMACHI) += hamachi.o
+ obj-$(CONFIG_NET) += Space.o loopback.o
diff --git a/target/linux/ar71xx/patches-2.6.34/006-ar71xx_wdt_driver.patch b/target/linux/ar71xx/patches-2.6.34/006-ar71xx_wdt_driver.patch
new file mode 100644
index 000000000..d71a11b86
--- /dev/null
+++ b/target/linux/ar71xx/patches-2.6.34/006-ar71xx_wdt_driver.patch
@@ -0,0 +1,26 @@
+--- a/drivers/watchdog/Kconfig
++++ b/drivers/watchdog/Kconfig
+@@ -840,6 +840,13 @@ config TXX9_WDT
+ 	help
+ 	  Hardware driver for the built-in watchdog timer on TXx9 MIPS SoCs.
+ 
++config AR71XX_WDT
++	tristate "Atheros AR71xx Watchdog Timer"
++	depends on ATHEROS_AR71XX
++	help
++	  Hardware driver for the built-in watchdog timer on the Atheros
++	  AR71xx SoCs.
++
+ # PARISC Architecture
+ 
+ # POWERPC Architecture
+--- a/drivers/watchdog/Makefile
++++ b/drivers/watchdog/Makefile
+@@ -112,6 +112,7 @@ obj-$(CONFIG_PNX833X_WDT) += pnx833x_wdt
+ obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o
+ obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
+ obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
++obj-$(CONFIG_AR71XX_WDT) += ar71xx_wdt.o
+ 
+ # PARISC Architecture
+ 
diff --git a/target/linux/ar71xx/patches-2.6.34/007-ar91xx_flash_driver.patch b/target/linux/ar71xx/patches-2.6.34/007-ar91xx_flash_driver.patch
new file mode 100644
index 000000000..5dbdd293c
--- /dev/null
+++ b/target/linux/ar71xx/patches-2.6.34/007-ar91xx_flash_driver.patch
@@ -0,0 +1,26 @@
+--- a/drivers/mtd/maps/Kconfig
++++ b/drivers/mtd/maps/Kconfig
+@@ -257,6 +257,13 @@ config MTD_ALCHEMY
+ 	help
+ 	  Flash memory access on AMD Alchemy Pb/Db/RDK Reference Boards
+ 
++config MTD_AR91XX_FLASH
++	tristate "Atheros AR91xx parallel flash support"
++	depends on ATHEROS_AR71XX
++	select MTD_COMPLEX_MAPPINGS
++	help
++	  Parallel flash driver for the Atheros AR91xx based boards.
++
+ config MTD_DILNETPC
+ 	tristate "CFI Flash device mapped on DIL/Net PC"
+ 	depends on X86 && MTD_CONCAT && MTD_PARTITIONS && MTD_CFI_INTELEXT && BROKEN
+--- a/drivers/mtd/maps/Makefile
++++ b/drivers/mtd/maps/Makefile
+@@ -40,6 +40,7 @@
+ obj-$(CONFIG_MTD_DBOX2)		+= dbox2-flash.o
+ obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o
+ obj-$(CONFIG_MTD_PCI)		+= pci.o
++obj-$(CONFIG_MTD_AR91XX_FLASH)	+= ar91xx_flash.o
+ obj-$(CONFIG_MTD_AUTCPU12)	+= autcpu12-nvram.o
+ obj-$(CONFIG_MTD_EDB7312)	+= edb7312.o
+ obj-$(CONFIG_MTD_IMPA7)		+= impa7.o
diff --git a/target/linux/ar71xx/patches-2.6.34/101-ksz8041_phy_driver.patch b/target/linux/ar71xx/patches-2.6.34/101-ksz8041_phy_driver.patch
new file mode 100644
index 000000000..503604610
--- /dev/null
+++ b/target/linux/ar71xx/patches-2.6.34/101-ksz8041_phy_driver.patch
@@ -0,0 +1,24 @@
+--- a/drivers/net/phy/Kconfig
++++ b/drivers/net/phy/Kconfig
+@@ -114,6 +114,11 @@ config RTL8306_PHY
+ 	tristate "Driver for Realtek RTL8306S switches"
+ 	select SWCONFIG
+ 
++config MICREL_PHY
++	tristate "Drivers for Micrel/Kendin PHYs"
++	---help---
++	  Currently has a driver for the KSZ8041
++
+ config FIXED_PHY
+ 	bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
+ 	depends on PHYLIB=y
+--- a/drivers/net/phy/Makefile
++++ b/drivers/net/phy/Makefile
+@@ -24,6 +24,7 @@ obj-$(CONFIG_RTL8366_SMI)	+= rtl8366_smi
+ obj-$(CONFIG_RTL8366S_PHY)	+= rtl8366s.o
+ obj-$(CONFIG_RTL8366RB_PHY)	+= rtl8366rb.o
+ obj-$(CONFIG_LSI_ET1011C_PHY)	+= et1011c.o
++obj-$(CONFIG_MICREL)		+= micrel.o
+ obj-$(CONFIG_FIXED_PHY)		+= fixed.o
+ obj-$(CONFIG_MDIO_BITBANG)	+= mdio-bitbang.o
+ obj-$(CONFIG_MDIO_GPIO)		+= mdio-gpio.o
diff --git a/target/linux/ar71xx/patches-2.6.34/102-mtd_m25p80_add_myloader_parser.patch b/target/linux/ar71xx/patches-2.6.34/102-mtd_m25p80_add_myloader_parser.patch
new file mode 100644
index 000000000..45f743e06
--- /dev/null
+++ b/target/linux/ar71xx/patches-2.6.34/102-mtd_m25p80_add_myloader_parser.patch
@@ -0,0 +1,19 @@
+--- a/drivers/mtd/devices/m25p80.c
++++ b/drivers/mtd/devices/m25p80.c
+@@ -922,6 +922,16 @@ static int __devinit m25p_probe(struct s
+ 					part_probes, &parts, 0);
+ 		}
+ 
++#ifdef CONFIG_MTD_MYLOADER_PARTS
++		if (nr_parts <= 0) {
++			static const char *part_probes[]
++					= { "MyLoader", NULL, };
++
++			nr_parts = parse_mtd_partitions(&flash->mtd,
++					part_probes, &parts, 0);
++		}
++#endif
++
+ 		if (nr_parts <= 0 && data && data->parts) {
+ 			parts = data->parts;
+ 			nr_parts = data->nr_parts;
diff --git a/target/linux/ar71xx/patches-2.6.34/104-mtd_m25p80_add_redboot_parser.patch b/target/linux/ar71xx/patches-2.6.34/104-mtd_m25p80_add_redboot_parser.patch
new file mode 100644
index 000000000..43fe987df
--- /dev/null
+++ b/target/linux/ar71xx/patches-2.6.34/104-mtd_m25p80_add_redboot_parser.patch
@@ -0,0 +1,18 @@
+--- a/drivers/mtd/devices/m25p80.c
++++ b/drivers/mtd/devices/m25p80.c
+@@ -932,6 +932,15 @@ static int __devinit m25p_probe(struct s
+ 		}
+ #endif
+ 
++#ifdef CONFIG_MTD_REDBOOT_PARTS
++		if (nr_parts <= 0) {
++			static const char *part_probes[]
++					= { "RedBoot", NULL, };
++
++			nr_parts = parse_mtd_partitions(&flash->mtd,
++					part_probes, &parts, 0);
++		}
++#endif
+ 		if (nr_parts <= 0 && data && data->parts) {
+ 			parts = data->parts;
+ 			nr_parts = data->nr_parts;
diff --git a/target/linux/ar71xx/patches-2.6.34/107-mtd-SST39VF6401B-support.patch b/target/linux/ar71xx/patches-2.6.34/107-mtd-SST39VF6401B-support.patch
new file mode 100644
index 000000000..2fdfcb7cd
--- /dev/null
+++ b/target/linux/ar71xx/patches-2.6.34/107-mtd-SST39VF6401B-support.patch
@@ -0,0 +1,29 @@
+--- a/drivers/mtd/chips/jedec_probe.c
++++ b/drivers/mtd/chips/jedec_probe.c
+@@ -166,6 +166,7 @@
+ #define SST39LF160	0x2782
+ #define SST39VF1601	0x234b
+ #define SST39VF3201	0x235b
++#define SST39VF6401B	0x236d
+ #define SST39LF512	0x00D4
+ #define SST39LF010	0x00D5
+ #define SST39LF020	0x00D6
+@@ -1556,6 +1557,18 @@ static const struct amd_flash_info jedec
+ 			ERASEINFO(0x10000,64),
+ 		}
+ 	}, {
++		.mfr_id         = MANUFACTURER_SST,
++		.dev_id         = SST39VF6401B,
++		.name           = "SST 39VF6401B",
++		.devtypes       = CFI_DEVICETYPE_X16,
++		.uaddr          = MTD_UADDR_0xAAAA_0x5555,
++		.dev_size       = SIZE_8MiB,
++		.cmd_set        = P_ID_AMD_STD,
++		.nr_regions     = 1,
++		.regions        = {
++			ERASEINFO(0x10000,128)
++		}
++	}, {
+ 		.mfr_id		= MANUFACTURER_ST,
+ 		.dev_id		= M29F800AB,
+ 		.name		= "ST M29F800AB",
diff --git a/target/linux/ar71xx/patches-2.6.34/108-mtd_fix_cfi_cmdset_0002_status_check.patch b/target/linux/ar71xx/patches-2.6.34/108-mtd_fix_cfi_cmdset_0002_status_check.patch
new file mode 100644
index 000000000..e0676cae9
--- /dev/null
+++ b/target/linux/ar71xx/patches-2.6.34/108-mtd_fix_cfi_cmdset_0002_status_check.patch
@@ -0,0 +1,69 @@
+--- a/drivers/mtd/chips/cfi_cmdset_0002.c
++++ b/drivers/mtd/chips/cfi_cmdset_0002.c
+@@ -1130,8 +1130,8 @@ static int __xipram do_write_oneword(str
+ 			break;
+ 		}
+ 
+-		if (chip_ready(map, adr))
+-			break;
++		if (chip_good(map, adr, datum))
++			goto enable_xip;
+ 
+ 		/* Latency issues. Drop the lock, wait a while and retry */
+ 		UDELAY(map, chip, adr, 1);
+@@ -1147,6 +1147,8 @@ static int __xipram do_write_oneword(str
+ 
+ 		ret = -EIO;
+ 	}
++
++ enable_xip:
+ 	xip_enable(map, chip, adr);
+  op_done:
+ 	chip->state = FL_READY;
+@@ -1493,7 +1495,6 @@ static int cfi_amdstd_write_buffers(stru
+ 	return 0;
+ }
+ 
+-
+ /*
+  * Handle devices with one erase region, that only implement
+  * the chip erase command.
+@@ -1557,8 +1558,8 @@ static int __xipram do_erase_chip(struct
+ 			chip->erase_suspended = 0;
+ 		}
+ 
+-		if (chip_ready(map, adr))
+-			break;
++		if (chip_good(map, adr, map_word_ff(map)))
++			goto op_done;
+ 
+ 		if (time_after(jiffies, timeo)) {
+ 			printk(KERN_WARNING "MTD %s(): software timeout\n",
+@@ -1578,6 +1579,7 @@ static int __xipram do_erase_chip(struct
+ 		ret = -EIO;
+ 	}
+ 
++ op_done:
+ 	chip->state = FL_READY;
+ 	xip_enable(map, chip, adr);
+ 	put_chip(map, chip, adr);
+@@ -1645,9 +1647,9 @@ static int __xipram do_erase_oneblock(st
+ 			chip->erase_suspended = 0;
+ 		}
+ 
+-		if (chip_ready(map, adr)) {
++		if (chip_good(map, adr, map_word_ff(map))) {
+ 			xip_enable(map, chip, adr);
+-			break;
++			goto op_done;
+ 		}
+ 
+ 		if (time_after(jiffies, timeo)) {
+@@ -1669,6 +1671,7 @@ static int __xipram do_erase_oneblock(st
+ 		ret = -EIO;
+ 	}
+ 
++ op_done:
+ 	chip->state = FL_READY;
+ 	put_chip(map, chip, adr);
+ 	spin_unlock(chip->mutex);
diff --git a/target/linux/ar71xx/patches-2.6.34/109-mtd-wrt160nl-trx-parser.patch b/target/linux/ar71xx/patches-2.6.34/109-mtd-wrt160nl-trx-parser.patch
new file mode 100644
index 000000000..037795b33
--- /dev/null
+++ b/target/linux/ar71xx/patches-2.6.34/109-mtd-wrt160nl-trx-parser.patch
@@ -0,0 +1,44 @@
+--- a/drivers/mtd/devices/m25p80.c
++++ b/drivers/mtd/devices/m25p80.c
+@@ -941,6 +941,16 @@ static int __devinit m25p_probe(struct s
+ 					part_probes, &parts, 0);
+ 		}
+ #endif
++
++#ifdef CONFIG_MTD_WRT160NL_PARTS
++		if (nr_parts <= 0) {
++			static const char *part_probes[]
++					= { "wrt160nl", NULL, };
++
++			nr_parts = parse_mtd_partitions(&flash->mtd,
++					part_probes, &parts, 0);
++		}
++#endif
+ 		if (nr_parts <= 0 && data && data->parts) {
+ 			parts = data->parts;
+ 			nr_parts = data->nr_parts;
+--- a/drivers/mtd/Kconfig
++++ b/drivers/mtd/Kconfig
+@@ -181,6 +181,12 @@ config MTD_AR7_PARTS
+ 	---help---
+ 	  TI AR7 partitioning support
+ 
++config MTD_WRT160NL_PARTS
++	tristate "Linksys WRT160NL partitioning support"
++	depends on MTD_PARTITIONS && AR71XX_MACH_WRT160NL
++	---help---
++	   Linksys WRT160NL partitioning support
++
+ config MTD_MYLOADER_PARTS
+ 	tristate "MyLoader partition parsing"
+ 	depends on MTD_PARTITIONS && (ADM5120 || ATHEROS_AR231X || ATHEROS_AR71XX)
+--- a/drivers/mtd/Makefile
++++ b/drivers/mtd/Makefile
+@@ -12,6 +12,7 @@ obj-$(CONFIG_MTD_REDBOOT_PARTS) += redbo
+ obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
+ obj-$(CONFIG_MTD_AFS_PARTS)	+= afs.o
+ obj-$(CONFIG_MTD_AR7_PARTS)	+= ar7part.o
++obj-$(CONFIG_MTD_WRT160NL_PARTS) += wrt160nl_part.o
+ obj-$(CONFIG_MTD_OF_PARTS)      += ofpart.o
+ obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
+ 
diff --git a/target/linux/ar71xx/patches-2.6.34/110-usb-ehci-add-war-for-synopsys-hc-bug.patch b/target/linux/ar71xx/patches-2.6.34/110-usb-ehci-add-war-for-synopsys-hc-bug.patch
new file mode 100644
index 000000000..076c39ea2
--- /dev/null
+++ b/target/linux/ar71xx/patches-2.6.34/110-usb-ehci-add-war-for-synopsys-hc-bug.patch
@@ -0,0 +1,22 @@
+--- a/drivers/usb/host/ehci-q.c
++++ b/drivers/usb/host/ehci-q.c
+@@ -1194,6 +1194,9 @@ static void end_unlink_async (struct ehc
+ 		ehci->reclaim = NULL;
+ 		start_unlink_async (ehci, next);
+ 	}
++
++	if (ehci->has_synopsys_hc_bug)
++		writel((u32)ehci->async->qh_dma, &ehci->regs->async_next);
+ }
+ 
+ /* makes sure the async qh will become idle */
+--- a/drivers/usb/host/ehci.h
++++ b/drivers/usb/host/ehci.h
+@@ -129,6 +129,7 @@ struct ehci_hcd {			/* one per controlle
+ 	unsigned		has_amcc_usb23:1;
+ 	unsigned		need_io_watchdog:1;
+ 	unsigned		broken_periodic:1;
++	unsigned		has_synopsys_hc_bug:1; /* Synopsys HC */
+ 
+ 	/* required for usb32 quirk */
+ 	#define OHCI_CTRL_HCFS          (3 << 6)
diff --git a/target/linux/ar71xx/patches-2.6.34/111-mtd-cfi_cmdset_0002-force-word-write.patch b/target/linux/ar71xx/patches-2.6.34/111-mtd-cfi_cmdset_0002-force-word-write.patch
new file mode 100644
index 000000000..3215a7d9d
--- /dev/null
+++ b/target/linux/ar71xx/patches-2.6.34/111-mtd-cfi_cmdset_0002-force-word-write.patch
@@ -0,0 +1,61 @@
+--- a/drivers/mtd/chips/cfi_cmdset_0002.c
++++ b/drivers/mtd/chips/cfi_cmdset_0002.c
+@@ -39,7 +39,7 @@
+ #include <linux/mtd/xip.h>
+ 
+ #define AMD_BOOTLOC_BUG
+-#define FORCE_WORD_WRITE 0
++#define FORCE_WORD_WRITE 1
+ 
+ #define MAX_WORD_RETRIES 3
+ 
+@@ -55,7 +55,9 @@
+ 
+ static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
+ static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
++#if !FORCE_WORD_WRITE
+ static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
++#endif
+ static int cfi_amdstd_erase_chip(struct mtd_info *, struct erase_info *);
+ static int cfi_amdstd_erase_varsize(struct mtd_info *, struct erase_info *);
+ static void cfi_amdstd_sync (struct mtd_info *);
+@@ -190,6 +192,7 @@ static void fixup_amd_bootblock(struct m
+ }
+ #endif
+ 
++#if !FORCE_WORD_WRITE
+ static void fixup_use_write_buffers(struct mtd_info *mtd, void *param)
+ {
+ 	struct map_info *map = mtd->priv;
+@@ -199,6 +202,7 @@ static void fixup_use_write_buffers(stru
+ 		mtd->write = cfi_amdstd_write_buffers;
+ 	}
+ }
++#endif /* !FORCE_WORD_WRITE */
+ 
+ /* Atmel chips don't use the same PRI format as AMD chips */
+ static void fixup_convert_atmel_pri(struct mtd_info *mtd, void *param)
+@@ -1304,6 +1308,7 @@ static int cfi_amdstd_write_words(struct
+ /*
+  * FIXME: interleaved mode not tested, and probably not supported!
+  */
++#if !FORCE_WORD_WRITE
+ static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip,
+ 				    unsigned long adr, const u_char *buf,
+ 				    int len)
+@@ -1415,7 +1420,6 @@ static int __xipram do_write_buffer(stru
+ 	return ret;
+ }
+ 
+-
+ static int cfi_amdstd_write_buffers(struct mtd_info *mtd, loff_t to, size_t len,
+ 				    size_t *retlen, const u_char *buf)
+ {
+@@ -1494,6 +1498,7 @@ static int cfi_amdstd_write_buffers(stru
+ 
+ 	return 0;
+ }
++#endif /* !FORCE_WORD_WRITE */
+ 
+ /*
+  * Handle devices with one erase region, that only implement
diff --git a/target/linux/ar71xx/patches-2.6.34/120-dsa-trailer-tag-validation-fix.patch b/target/linux/ar71xx/patches-2.6.34/120-dsa-trailer-tag-validation-fix.patch
new file mode 100644
index 000000000..b58aeedc3
--- /dev/null
+++ b/target/linux/ar71xx/patches-2.6.34/120-dsa-trailer-tag-validation-fix.patch
@@ -0,0 +1,11 @@
+--- a/net/dsa/tag_trailer.c
++++ b/net/dsa/tag_trailer.c
+@@ -86,7 +86,7 @@ static int trailer_rcv(struct sk_buff *s
+ 
+ 	trailer = skb_tail_pointer(skb) - 4;
+ 	if (trailer[0] != 0x80 || (trailer[1] & 0xf8) != 0x00 ||
+-	    (trailer[3] & 0xef) != 0x00 || trailer[3] != 0x00)
++	    (trailer[2] & 0xef) != 0x00 || (trailer[3] & 0xfe) != 0x00)
+ 		goto out_drop;
+ 
+ 	source_port = trailer[1] & 7;
diff --git a/target/linux/ar71xx/patches-2.6.34/121-dsa-add-88e6063-driver.patch b/target/linux/ar71xx/patches-2.6.34/121-dsa-add-88e6063-driver.patch
new file mode 100644
index 000000000..1a11a69c6
--- /dev/null
+++ b/target/linux/ar71xx/patches-2.6.34/121-dsa-add-88e6063-driver.patch
@@ -0,0 +1,26 @@
+--- a/net/dsa/Kconfig
++++ b/net/dsa/Kconfig
+@@ -36,6 +36,13 @@ config NET_DSA_MV88E6060
+ 	  This enables support for the Marvell 88E6060 ethernet switch
+ 	  chip.
+ 
++config NET_DSA_MV88E6063
++	bool "Marvell 88E6063 ethernet switch chip support"
++	select NET_DSA_TAG_TRAILER
++	---help---
++	  This enables support for the Marvell 88E6063 ethernet switch
++	  chip
++
+ config NET_DSA_MV88E6XXX_NEED_PPU
+ 	bool
+ 	default n
+--- a/net/dsa/Makefile
++++ b/net/dsa/Makefile
+@@ -6,6 +6,7 @@ obj-$(CONFIG_NET_DSA_TAG_TRAILER) += tag
+ # switch drivers
+ obj-$(CONFIG_NET_DSA_MV88E6XXX) += mv88e6xxx.o
+ obj-$(CONFIG_NET_DSA_MV88E6060) += mv88e6060.o
++obj-$(CONFIG_NET_DSA_MV88E6063) += mv88e6063.o
+ obj-$(CONFIG_NET_DSA_MV88E6123_61_65) += mv88e6123_61_65.o
+ obj-$(CONFIG_NET_DSA_MV88E6131) += mv88e6131.o
+ 
diff --git a/target/linux/ar71xx/patches-2.6.34/122-dsa-add-qinq-tagging-format.patch b/target/linux/ar71xx/patches-2.6.34/122-dsa-add-qinq-tagging-format.patch
new file mode 100644
index 000000000..dc03fd6eb
--- /dev/null
+++ b/target/linux/ar71xx/patches-2.6.34/122-dsa-add-qinq-tagging-format.patch
@@ -0,0 +1,79 @@
+--- a/include/linux/if_ether.h
++++ b/include/linux/if_ether.h
+@@ -81,6 +81,7 @@
+ #define ETH_P_1588	0x88F7		/* IEEE 1588 Timesync */
+ #define ETH_P_FCOE	0x8906		/* Fibre Channel over Ethernet  */
+ #define ETH_P_FIP	0x8914		/* FCoE Initialization Protocol */
++#define ETH_P_QINQ	0x9100		/* QinQ VLAN Stacking Protocol */
+ #define ETH_P_EDSA	0xDADA		/* Ethertype DSA [ NOT AN OFFICIALLY REGISTERED ID ] */
+ 
+ /*
+--- a/net/dsa/dsa_priv.h
++++ b/net/dsa/dsa_priv.h
+@@ -174,6 +174,9 @@ netdev_tx_t dsa_xmit(struct sk_buff *skb
+ /* tag_edsa.c */
+ netdev_tx_t edsa_xmit(struct sk_buff *skb, struct net_device *dev);
+ 
++/* tag_qinq.c */
++netdev_tx_t qinq_xmit(struct sk_buff *skb, struct net_device *dev);
++
+ /* tag_trailer.c */
+ netdev_tx_t trailer_xmit(struct sk_buff *skb, struct net_device *dev);
+ 
+--- a/net/dsa/Kconfig
++++ b/net/dsa/Kconfig
+@@ -23,6 +23,10 @@ config NET_DSA_TAG_TRAILER
+ 	bool
+ 	default n
+ 
++config NET_DSA_TAG_QINQ
++	bool
++	default y
++
+ 
+ # switch drivers
+ config NET_DSA_MV88E6XXX
+--- a/net/dsa/Makefile
++++ b/net/dsa/Makefile
+@@ -1,6 +1,7 @@
+ # tagging formats
+ obj-$(CONFIG_NET_DSA_TAG_DSA) += tag_dsa.o
+ obj-$(CONFIG_NET_DSA_TAG_EDSA) += tag_edsa.o
++obj-$(CONFIG_NET_DSA_TAG_QINQ) += tag_qinq.o
+ obj-$(CONFIG_NET_DSA_TAG_TRAILER) += tag_trailer.o
+ 
+ # switch drivers
+--- a/net/dsa/slave.c
++++ b/net/dsa/slave.c
+@@ -321,6 +321,19 @@ static const struct net_device_ops edsa_
+ 	.ndo_do_ioctl		= dsa_slave_ioctl,
+ };
+ #endif
++#ifdef CONFIG_NET_DSA_TAG_QINQ
++static const struct net_device_ops qinq_netdev_ops = {
++	.ndo_init		= dsa_slave_init,
++	.ndo_open	 	= dsa_slave_open,
++	.ndo_stop		= dsa_slave_close,
++	.ndo_start_xmit		= qinq_xmit,
++	.ndo_change_rx_flags	= dsa_slave_change_rx_flags,
++	.ndo_set_rx_mode	= dsa_slave_set_rx_mode,
++	.ndo_set_multicast_list = dsa_slave_set_rx_mode,
++	.ndo_set_mac_address	= dsa_slave_set_mac_address,
++	.ndo_do_ioctl		= dsa_slave_ioctl,
++};
++#endif
+ #ifdef CONFIG_NET_DSA_TAG_TRAILER
+ static const struct net_device_ops trailer_netdev_ops = {
+ 	.ndo_init		= dsa_slave_init,
+@@ -366,6 +379,11 @@ dsa_slave_create(struct dsa_switch *ds, 
+ 		slave_dev->netdev_ops = &edsa_netdev_ops;
+ 		break;
+ #endif
++#ifdef CONFIG_NET_DSA_TAG_QINQ
++	case htons(ETH_P_QINQ):
++		slave_dev->netdev_ops = &qinq_netdev_ops;
++		break;
++#endif
+ #ifdef CONFIG_NET_DSA_TAG_TRAILER
+ 	case htons(ETH_P_TRAILER):
+ 		slave_dev->netdev_ops = &trailer_netdev_ops;
diff --git a/target/linux/ar71xx/patches-2.6.34/123-dsa-add-ar7240-built-in-switch-support.patch b/target/linux/ar71xx/patches-2.6.34/123-dsa-add-ar7240-built-in-switch-support.patch
new file mode 100644
index 000000000..50e6e5de2
--- /dev/null
+++ b/target/linux/ar71xx/patches-2.6.34/123-dsa-add-ar7240-built-in-switch-support.patch
@@ -0,0 +1,28 @@
+--- a/net/dsa/Kconfig
++++ b/net/dsa/Kconfig
+@@ -29,6 +29,15 @@ config NET_DSA_TAG_QINQ
+ 
+ 
+ # switch drivers
++config NET_DSA_AR7240
++	bool "Atheros AR7240 built-in ethernet switch support"
++	depends on ATHEROS_AR71XX
++	default n
++	select NET_DSA_TAG_QINQ
++	---help---
++	  This enables support for the built-in ethernet switch of the
++	  Atheros AR7240 SoC.
++
+ config NET_DSA_MV88E6XXX
+ 	bool
+ 	default n
+--- a/net/dsa/Makefile
++++ b/net/dsa/Makefile
+@@ -5,6 +5,7 @@ obj-$(CONFIG_NET_DSA_TAG_QINQ) += tag_qi
+ obj-$(CONFIG_NET_DSA_TAG_TRAILER) += tag_trailer.o
+ 
+ # switch drivers
++obj-$(CONFIG_NET_DSA_AR7240) += ar7240.o
+ obj-$(CONFIG_NET_DSA_MV88E6XXX) += mv88e6xxx.o
+ obj-$(CONFIG_NET_DSA_MV88E6060) += mv88e6060.o
+ obj-$(CONFIG_NET_DSA_MV88E6063) += mv88e6063.o
diff --git a/target/linux/ar71xx/patches-2.6.34/140-redboot_partition_scan.patch b/target/linux/ar71xx/patches-2.6.34/140-redboot_partition_scan.patch
new file mode 100644
index 000000000..289d4eb99
--- /dev/null
+++ b/target/linux/ar71xx/patches-2.6.34/140-redboot_partition_scan.patch
@@ -0,0 +1,54 @@
+--- a/drivers/mtd/redboot.c
++++ b/drivers/mtd/redboot.c
+@@ -60,31 +60,32 @@ static int parse_redboot_partitions(stru
+ 	static char nullstring[] = "unallocated";
+ #endif
+ 
++	buf = vmalloc(master->erasesize);
++	if (!buf)
++		return -ENOMEM;
++
++ restart:
+ 	if ( directory < 0 ) {
+ 		offset = master->size + directory * master->erasesize;
+-		while (master->block_isbad && 
++		while (master->block_isbad &&
+ 		       master->block_isbad(master, offset)) {
+ 			if (!offset) {
+ 			nogood:
+ 				printk(KERN_NOTICE "Failed to find a non-bad block to check for RedBoot partition table\n");
++				vfree(buf);
+ 				return -EIO;
+ 			}
+ 			offset -= master->erasesize;
+ 		}
+ 	} else {
+ 		offset = directory * master->erasesize;
+-		while (master->block_isbad && 
++		while (master->block_isbad &&
+ 		       master->block_isbad(master, offset)) {
+ 			offset += master->erasesize;
+ 			if (offset == master->size)
+ 				goto nogood;
+ 		}
+ 	}
+-	buf = vmalloc(master->erasesize);
+-
+-	if (!buf)
+-		return -ENOMEM;
+-
+ 	printk(KERN_NOTICE "Searching for RedBoot partition table in %s at offset 0x%lx\n",
+ 	       master->name, offset);
+ 
+@@ -156,6 +157,11 @@ static int parse_redboot_partitions(stru
+ 	}
+ 	if (i == numslots) {
+ 		/* Didn't find it */
++		if (offset + master->erasesize < master->size) {
++			/* not at the end of the flash yet, maybe next block :) */
++			directory++;
++			goto restart;
++		}
+ 		printk(KERN_NOTICE "No RedBoot partition table detected in %s\n",
+ 		       master->name);
+ 		ret = 0;
diff --git a/target/linux/ar71xx/patches-2.6.34/200-rb4xx_nand_driver.patch b/target/linux/ar71xx/patches-2.6.34/200-rb4xx_nand_driver.patch
new file mode 100644
index 000000000..1e64e0a36
--- /dev/null
+++ b/target/linux/ar71xx/patches-2.6.34/200-rb4xx_nand_driver.patch
@@ -0,0 +1,21 @@
+--- a/drivers/mtd/nand/Kconfig
++++ b/drivers/mtd/nand/Kconfig
+@@ -488,4 +488,8 @@ config MTD_NAND_W90P910
+ 	  This enables the driver for the NAND Flash on evaluation board based
+ 	  on w90p910.
+ 
++config MTD_NAND_RB4XX
++	tristate "NAND flash driver for RouterBoard 4xx series"
++	depends on MTD_NAND && AR71XX_MACH_RB4XX
++
+ endif # MTD_NAND
+--- a/drivers/mtd/nand/Makefile
++++ b/drivers/mtd/nand/Makefile
+@@ -30,6 +30,7 @@ obj-$(CONFIG_MTD_NAND_CM_X270)		+= cmx27
+ obj-$(CONFIG_MTD_NAND_PXA3xx)		+= pxa3xx_nand.o
+ obj-$(CONFIG_MTD_NAND_TMIO)		+= tmio_nand.o
+ obj-$(CONFIG_MTD_NAND_PLATFORM)		+= plat_nand.o
++obj-$(CONFIG_MTD_NAND_RB4XX)		+= rb4xx_nand.o
+ obj-$(CONFIG_MTD_ALAUDA)		+= alauda.o
+ obj-$(CONFIG_MTD_NAND_PASEMI)		+= pasemi_nand.o
+ obj-$(CONFIG_MTD_NAND_ORION)		+= orion_nand.o
diff --git a/target/linux/ar71xx/patches-2.6.34/201-ap83_spi_controller.patch b/target/linux/ar71xx/patches-2.6.34/201-ap83_spi_controller.patch
new file mode 100644
index 000000000..a8e889a7b
--- /dev/null
+++ b/target/linux/ar71xx/patches-2.6.34/201-ap83_spi_controller.patch
@@ -0,0 +1,27 @@
+--- a/drivers/spi/Makefile
++++ b/drivers/spi/Makefile
+@@ -11,6 +11,7 @@ endif
+ obj-$(CONFIG_SPI_MASTER)		+= spi.o
+ 
+ # SPI master controller drivers (bus)
++obj-$(CONFIG_SPI_AP83)			+= ap83_spi.o
+ obj-$(CONFIG_SPI_AR71XX)		+= ar71xx_spi.o
+ obj-$(CONFIG_SPI_ATMEL)			+= atmel_spi.o
+ obj-$(CONFIG_SPI_BFIN)			+= spi_bfin5xx.o
+--- a/drivers/spi/Kconfig
++++ b/drivers/spi/Kconfig
+@@ -53,6 +53,14 @@ if SPI_MASTER
+ 
+ comment "SPI Master Controller Drivers"
+ 
++config SPI_AP83
++	tristate "Atheros AP83 specific SPI Controller"
++	depends on SPI_MASTER && AR71XX_MACH_AP83
++	select SPI_BITBANG
++	help
++	  This is a specific SPI controller driver for the Atheros AP83
++	  reference board.
++
+ config SPI_AR71XX
+ 	tristate "Atheros AR71xx SPI Controller"
+ 	depends on SPI_MASTER && ATHEROS_AR71XX
diff --git a/target/linux/ar71xx/patches-2.6.34/202-spi_vsc7385_driver.patch b/target/linux/ar71xx/patches-2.6.34/202-spi_vsc7385_driver.patch
new file mode 100644
index 000000000..487785a94
--- /dev/null
+++ b/target/linux/ar71xx/patches-2.6.34/202-spi_vsc7385_driver.patch
@@ -0,0 +1,24 @@
+--- a/drivers/spi/Kconfig
++++ b/drivers/spi/Kconfig
+@@ -365,6 +365,11 @@ config SPI_TLE62X0
+ 	  sysfs interface, with each line presented as a kind of GPIO
+ 	  exposing both switch control and diagnostic feedback.
+ 
++config SPI_VSC7385
++	tristate "Vitesse VSC7385 ethernet switch driver"
++	help
++	  SPI driver for the Vitesse VSC7385 ethernet switch.
++
+ #
+ # Add new SPI protocol masters in alphabetical order above this line
+ #
+--- a/drivers/spi/Makefile
++++ b/drivers/spi/Makefile
+@@ -54,6 +54,7 @@ spi_s3c24xx_hw-$(CONFIG_SPI_S3C24XX_FIQ)
+ 
+ # SPI protocol drivers (device/link on bus)
+ obj-$(CONFIG_SPI_SPIDEV)	+= spidev.o
++obj-$(CONFIG_SPI_VSC7385)	+= spi_vsc7385.o
+ obj-$(CONFIG_SPI_TLE62X0)	+= tle62x0.o
+ # 	... add above this line ...
+ 
diff --git a/target/linux/ar71xx/patches-2.6.34/203-pb44_spi_controller.patch b/target/linux/ar71xx/patches-2.6.34/203-pb44_spi_controller.patch
new file mode 100644
index 000000000..2a6edeb18
--- /dev/null
+++ b/target/linux/ar71xx/patches-2.6.34/203-pb44_spi_controller.patch
@@ -0,0 +1,27 @@
+--- a/drivers/spi/Kconfig
++++ b/drivers/spi/Kconfig
+@@ -68,6 +68,14 @@ config SPI_AR71XX
+ 	help
+ 	  This is the SPI contoller driver for Atheros AR71xx.
+ 
++config SPI_PB44
++	tristate "Atheros PB44 board specific SPI controller"
++	depends on SPI_MASTER && AR71XX_MACH_PB44
++	select SPI_BITBANG
++	help
++	  This is a specific SPI controller driver for the Atheros PB44
++	  reference board.
++
+ config SPI_ATMEL
+ 	tristate "Atmel SPI Controller"
+ 	depends on (ARCH_AT91 || AVR32)
+--- a/drivers/spi/Makefile
++++ b/drivers/spi/Makefile
+@@ -24,6 +24,7 @@ obj-$(CONFIG_SPI_GPIO)			+= spi_gpio.o
+ obj-$(CONFIG_SPI_GPIO_OLD)		+= spi_gpio_old.o
+ obj-$(CONFIG_SPI_IMX)			+= spi_imx.o
+ obj-$(CONFIG_SPI_LM70_LLP)		+= spi_lm70llp.o
++obj-$(CONFIG_SPI_PB44)			+= pb44_spi.o
+ obj-$(CONFIG_SPI_PXA2XX)		+= pxa2xx_spi.o
+ obj-$(CONFIG_SPI_OMAP_UWIRE)		+= omap_uwire.o
+ obj-$(CONFIG_SPI_OMAP24XX)		+= omap2_mcspi.o
diff --git a/target/linux/ar71xx/patches-2.6.34/205-wndr3700-usb-led-driver.patch b/target/linux/ar71xx/patches-2.6.34/205-wndr3700-usb-led-driver.patch
new file mode 100644
index 000000000..d2fbc9c76
--- /dev/null
+++ b/target/linux/ar71xx/patches-2.6.34/205-wndr3700-usb-led-driver.patch
@@ -0,0 +1,26 @@
+--- a/drivers/leds/Kconfig
++++ b/drivers/leds/Kconfig
+@@ -269,6 +269,13 @@ config LEDS_ADP5520
+ 	  To compile this driver as a module, choose M here: the module will
+ 	  be called leds-adp5520.
+ 
++config LEDS_WNDR3700_USB
++	tristate "NETGEAR WNDR3700 USB LED driver"
++	depends on LEDS_CLASS && AR71XX_MACH_WNDR3700
++	help
++	  This option enables support for the USB LED found on the
++	  NETGEAR WNDR3700 board.
++
+ comment "LED Triggers"
+ 
+ config LEDS_TRIGGERS
+--- a/drivers/leds/Makefile
++++ b/drivers/leds/Makefile
+@@ -29,6 +29,7 @@ obj-$(CONFIG_LEDS_DA903X)		+= leds-da903
+ obj-$(CONFIG_LEDS_WM831X_STATUS)	+= leds-wm831x-status.o
+ obj-$(CONFIG_LEDS_WM8350)		+= leds-wm8350.o
+ obj-$(CONFIG_LEDS_PWM)			+= leds-pwm.o
++obj-${CONFIG_LEDS_WNDR3700_USB}		+= leds-wndr3700-usb.o
+ obj-$(CONFIG_LEDS_REGULATOR)		+= leds-regulator.o
+ obj-$(CONFIG_LEDS_INTEL_SS4200)		+= leds-ss4200.o
+ obj-$(CONFIG_LEDS_LT3593)		+= leds-lt3593.o
diff --git a/target/linux/ar71xx/patches-2.6.34/206-nxp-74hc153-gpio-chip-driver.patch b/target/linux/ar71xx/patches-2.6.34/206-nxp-74hc153-gpio-chip-driver.patch
new file mode 100644
index 000000000..575f7bbd8
--- /dev/null
+++ b/target/linux/ar71xx/patches-2.6.34/206-nxp-74hc153-gpio-chip-driver.patch
@@ -0,0 +1,25 @@
+--- a/drivers/gpio/Kconfig
++++ b/drivers/gpio/Kconfig
+@@ -255,4 +255,12 @@ config GPIO_UCB1400
+ 	  To compile this driver as a module, choose M here: the
+ 	  module will be called ucb1400_gpio.
+ 
++comment "Other GPIO expanders"
++
++config GPIO_NXP_74HC153
++	tristate "NXP 74HC153 Dual 4-input multiplexer"
++	help
++	  Platform driver for NXP 74HC153 Dual 4-input Multiplexer. This
++	  provides a GPIO interface supporting inputs.
++
+ endif
+--- a/drivers/gpio/Makefile
++++ b/drivers/gpio/Makefile
+@@ -11,6 +11,7 @@ obj-$(CONFIG_GPIO_MAX7301)	+= max7301.o
+ obj-$(CONFIG_GPIO_MAX732X)	+= max732x.o
+ obj-$(CONFIG_GPIO_MC33880)	+= mc33880.o
+ obj-$(CONFIG_GPIO_MCP23S08)	+= mcp23s08.o
++obj-$(CONFIG_GPIO_NXP_74HC153)	+= nxp_74hc153.o
+ obj-$(CONFIG_GPIO_PCA953X)	+= pca953x.o
+ obj-$(CONFIG_GPIO_PCF857X)	+= pcf857x.o
+ obj-$(CONFIG_GPIO_PL061)	+= pl061.o
diff --git a/target/linux/ar71xx/patches-2.6.34/207-rb750-led-driver.patch b/target/linux/ar71xx/patches-2.6.34/207-rb750-led-driver.patch
new file mode 100644
index 000000000..500604fe2
--- /dev/null
+++ b/target/linux/ar71xx/patches-2.6.34/207-rb750-led-driver.patch
@@ -0,0 +1,23 @@
+--- a/drivers/leds/Kconfig
++++ b/drivers/leds/Kconfig
+@@ -276,6 +276,10 @@ config LEDS_WNDR3700_USB
+ 	  This option enables support for the USB LED found on the
+ 	  NETGEAR WNDR3700 board.
+ 
++config LEDS_RB750
++	tristate "LED driver for the Mikrotik RouterBOARD 750"
++	depends on LEDS_CLASS && AR71XX_MACH_RB750
++
+ comment "LED Triggers"
+ 
+ config LEDS_TRIGGERS
+--- a/drivers/leds/Makefile
++++ b/drivers/leds/Makefile
+@@ -34,6 +34,7 @@ obj-$(CONFIG_LEDS_REGULATOR)		+= leds-re
+ obj-$(CONFIG_LEDS_INTEL_SS4200)		+= leds-ss4200.o
+ obj-$(CONFIG_LEDS_LT3593)		+= leds-lt3593.o
+ obj-$(CONFIG_LEDS_ADP5520)		+= leds-adp5520.o
++obj-$(CONFIG_LEDS_RB750)		+= leds-rb750.o
+ 
+ # LED SPI Drivers
+ obj-$(CONFIG_LEDS_DAC124S085)		+= leds-dac124s085.o
diff --git a/target/linux/ar71xx/patches-2.6.34/208-rb750-nand-driver.patch b/target/linux/ar71xx/patches-2.6.34/208-rb750-nand-driver.patch
new file mode 100644
index 000000000..3766a1cd8
--- /dev/null
+++ b/target/linux/ar71xx/patches-2.6.34/208-rb750-nand-driver.patch
@@ -0,0 +1,21 @@
+--- a/drivers/mtd/nand/Kconfig
++++ b/drivers/mtd/nand/Kconfig
+@@ -492,4 +492,8 @@ config MTD_NAND_RB4XX
+ 	tristate "NAND flash driver for RouterBoard 4xx series"
+ 	depends on MTD_NAND && AR71XX_MACH_RB4XX
+ 
++config MTD_NAND_RB750
++	tristate "NAND flash driver for the RouterBoard 750"
++	depends on MTD_NAND && AR71XX_MACH_RB750
++
+ endif # MTD_NAND
+--- a/drivers/mtd/nand/Makefile
++++ b/drivers/mtd/nand/Makefile
+@@ -31,6 +31,7 @@ obj-$(CONFIG_MTD_NAND_PXA3xx)		+= pxa3xx
+ obj-$(CONFIG_MTD_NAND_TMIO)		+= tmio_nand.o
+ obj-$(CONFIG_MTD_NAND_PLATFORM)		+= plat_nand.o
+ obj-$(CONFIG_MTD_NAND_RB4XX)		+= rb4xx_nand.o
++obj-$(CONFIG_MTD_NAND_RB750)		+= rb750_nand.o
+ obj-$(CONFIG_MTD_ALAUDA)		+= alauda.o
+ obj-$(CONFIG_MTD_NAND_PASEMI)		+= pasemi_nand.o
+ obj-$(CONFIG_MTD_NAND_ORION)		+= orion_nand.o
diff --git a/target/linux/ar71xx/patches-2.6.34/300-mips_fw_myloader.patch b/target/linux/ar71xx/patches-2.6.34/300-mips_fw_myloader.patch
new file mode 100644
index 000000000..dd4905a07
--- /dev/null
+++ b/target/linux/ar71xx/patches-2.6.34/300-mips_fw_myloader.patch
@@ -0,0 +1,22 @@
+--- a/arch/mips/Makefile
++++ b/arch/mips/Makefile
+@@ -181,6 +181,7 @@ endif
+ #
+ libs-$(CONFIG_ARC)		+= arch/mips/fw/arc/
+ libs-$(CONFIG_CFE)		+= arch/mips/fw/cfe/
++libs-$(CONFIG_MYLOADER)		+= arch/mips/fw/myloader/
+ libs-$(CONFIG_SNIPROM)		+= arch/mips/fw/sni/
+ libs-y				+= arch/mips/fw/lib/
+ 
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -877,6 +877,9 @@ config MIPS_NILE4
+ config MIPS_DISABLE_OBSOLETE_IDE
+ 	bool
+ 
++config MYLOADER
++	bool
++
+ config SYNC_R4K
+ 	bool
+ 
diff --git a/target/linux/ar71xx/patches-2.6.34/400-mips-multi-machine-update.patch b/target/linux/ar71xx/patches-2.6.34/400-mips-multi-machine-update.patch
new file mode 100644
index 000000000..d63587901
--- /dev/null
+++ b/target/linux/ar71xx/patches-2.6.34/400-mips-multi-machine-update.patch
@@ -0,0 +1,134 @@
+--- a/arch/mips/kernel/mips_machine.c
++++ b/arch/mips/kernel/mips_machine.c
+@@ -7,12 +7,13 @@
+  *
+  */
+ #include <linux/mm.h>
++#include <linux/string.h>
+ 
+ #include <asm/mips_machine.h>
+-#include <asm/bootinfo.h>
+ 
+ static struct list_head mips_machines __initdata =
+ 		LIST_HEAD_INIT(mips_machines);
++static char *mips_machid __initdata;
+ 
+ char *mips_machine_name = "Unknown";
+ 
+@@ -55,20 +56,65 @@ void __init mips_machine_set_name(char *
+ 	}
+ }
+ 
+-void __init mips_machine_setup(unsigned long machtype)
++void __init mips_machine_setup(void)
+ {
+ 	struct mips_machine *mach;
+ 
+-	mach = mips_machine_find(machtype);
++	mach = mips_machine_find(mips_machtype);
+ 	if (!mach) {
+-		printk(KERN_ALERT "MIPS: no machine registered for "
+-			"machtype %lu\n", machtype);
++		printk(KERN_WARNING "MIPS: no machine registered for "
++			"machtype %lu\n", mips_machtype);
+ 		return;
+ 	}
+ 
+ 	mips_machine_set_name(mach->mach_name);
+-	printk(KERN_INFO "MIPS: machine is %s\n", mips_machine_name);
++	printk(KERN_NOTICE "MIPS: machine is %s\n", mips_machine_name);
+ 
+ 	if (mach->mach_setup)
+ 		mach->mach_setup();
+ }
++
++int __init mips_machtype_setup(char *id)
++{
++	if (mips_machid == NULL)
++		mips_machid = id;
++
++	return 1;
++}
++
++__setup("machtype=", mips_machtype_setup);
++
++static int __init mips_machtype_init(void)
++{
++	struct list_head *this;
++	struct mips_machine *mach;
++
++	if (mips_machid == NULL)
++		return 0;
++
++	list_for_each(this, &mips_machines) {
++		mach = list_entry(this, struct mips_machine, list);
++		if (mach->mach_id == NULL)
++			continue;
++
++		if (strcmp(mach->mach_id, mips_machid) == 0) {
++			mips_machtype = mach->mach_type;
++			return 0;
++		}
++	}
++
++	printk(KERN_WARNING
++	       "MIPS: no machine found for id: '%s', registered machines:\n",
++	       mips_machid);
++	printk(KERN_WARNING "%32s %s\n", "id", "name");
++
++	list_for_each(this, &mips_machines) {
++		mach = list_entry(this, struct mips_machine, list);
++		printk(KERN_WARNING "%32s %s\n",
++		       mach->mach_id ? mach->mach_id : "", mach->mach_name);
++	}
++
++	return 0;
++}
++
++core_initcall(mips_machtype_init);
+--- a/arch/mips/include/asm/mips_machine.h
++++ b/arch/mips/include/asm/mips_machine.h
+@@ -13,25 +13,33 @@
+ #include <linux/init.h>
+ #include <linux/list.h>
+ 
++#include <asm/bootinfo.h>
++
+ struct mips_machine {
+ 	unsigned long		mach_type;
+-	void			(*mach_setup)(void);
++	char			*mach_id;
+ 	char			*mach_name;
++	void			(*mach_setup)(void);
+ 	struct list_head	list;
+ };
+ 
+ void mips_machine_register(struct mips_machine *) __init;
+-void mips_machine_setup(unsigned long machtype) __init;
++void mips_machine_setup(void) __init;
++int  mips_machtype_setup(char *id) __init;
+ void mips_machine_set_name(char *name) __init;
+ 
+ extern char *mips_machine_name;
+ 
+-#define MIPS_MACHINE(_type, _name, _setup) 			\
+-static char machine_name_##_type[] __initdata = _name;		\
++#define MIPS_MACHINE(_type, _id, _name, _setup) 		\
++static const char machine_name_##_type[] __initconst		\
++			__aligned(1) = _name;			\
++static const char machine_id_##_type[] __initconst		\
++			__aligned(1) = _id;			\
+ static struct mips_machine machine_##_type __initdata =		\
+ {								\
+ 	.mach_type	= _type,				\
+-	.mach_name	= machine_name_##_type,			\
++	.mach_id	= (char *) machine_id_##_type,		\
++	.mach_name	= (char *) machine_name_##_type,	\
+ 	.mach_setup	= _setup,				\
+ };								\
+ 								\
+@@ -44,4 +52,3 @@ static int __init register_machine_##_ty
+ pure_initcall(register_machine_##_type)
+ 
+ #endif /* __ASM_MIPS_MACHINE_H */
+-
diff --git a/target/linux/ar71xx/patches-2.6.34/901-get_c0_compare_irq_function.patch b/target/linux/ar71xx/patches-2.6.34/901-get_c0_compare_irq_function.patch
new file mode 100644
index 000000000..c10f4efb1
--- /dev/null
+++ b/target/linux/ar71xx/patches-2.6.34/901-get_c0_compare_irq_function.patch
@@ -0,0 +1,29 @@
+--- a/arch/mips/kernel/traps.c
++++ b/arch/mips/kernel/traps.c
+@@ -51,6 +51,7 @@
+ #include <asm/stacktrace.h>
+ #include <asm/irq.h>
+ #include <asm/uasm.h>
++#include <asm/time.h>
+ 
+ extern void check_wait(void);
+ extern asmlinkage void r4k_wait(void);
+@@ -1501,6 +1502,8 @@
+ 	if (cpu_has_mips_r2) {
+ 		cp0_compare_irq_shift = CAUSEB_TI - CAUSEB_IP;
+ 		cp0_compare_irq = (read_c0_intctl() >> INTCTLB_IPTI) & 7;
++		if (get_c0_compare_irq)
++			cp0_compare_irq = get_c0_compare_irq();
+ 		cp0_perfcount_irq = (read_c0_intctl() >> INTCTLB_IPPCI) & 7;
+ 		if (cp0_perfcount_irq == cp0_compare_irq)
+ 			cp0_perfcount_irq = -1;
+--- a/arch/mips/include/asm/time.h
++++ b/arch/mips/include/asm/time.h
+@@ -52,6 +52,7 @@ extern int (*perf_irq)(void);
+  */
+ #ifdef CONFIG_CEVT_R4K_LIB
+ extern unsigned int __weak get_c0_compare_int(void);
++extern unsigned int __weak get_c0_compare_irq(void);
+ extern int r4k_clockevent_init(void);
+ #endif
+ 
diff --git a/target/linux/ar71xx/patches-2.6.34/902-mips_clocksource_init_war.patch b/target/linux/ar71xx/patches-2.6.34/902-mips_clocksource_init_war.patch
new file mode 100644
index 000000000..1ce438080
--- /dev/null
+++ b/target/linux/ar71xx/patches-2.6.34/902-mips_clocksource_init_war.patch
@@ -0,0 +1,56 @@
+--- a/arch/mips/kernel/cevt-r4k.c
++++ b/arch/mips/kernel/cevt-r4k.c
+@@ -16,6 +16,22 @@
+ #include <asm/cevt-r4k.h>
+ 
+ /*
++ * Compare interrupt can be routed and latched outside the core,
++ * so a single execution hazard barrier may not be enough to give
++ * it time to clear as seen in the Cause register.  4 time the
++ * pipeline depth seems reasonably conservative, and empirically
++ * works better in configurations with high CPU/bus clock ratios.
++ */
++
++#define compare_change_hazard() \
++	do { \
++		irq_disable_hazard(); \
++		irq_disable_hazard(); \
++		irq_disable_hazard(); \
++		irq_disable_hazard(); \
++	} while (0)
++
++/*
+  * The SMTC Kernel for the 34K, 1004K, et. al. replaces several
+  * of these routines with SMTC-specific variants.
+  */
+@@ -31,6 +47,7 @@ static int mips_next_event(unsigned long
+ 	cnt = read_c0_count();
+ 	cnt += delta;
+ 	write_c0_compare(cnt);
++	compare_change_hazard();
+ 	res = ((int)(read_c0_count() - cnt) > 0) ? -ETIME : 0;
+ 	return res;
+ }
+@@ -100,22 +117,6 @@ static int c0_compare_int_pending(void)
+ 	return (read_c0_cause() >> cp0_compare_irq_shift) & (1ul << CAUSEB_IP);
+ }
+ 
+-/*
+- * Compare interrupt can be routed and latched outside the core,
+- * so a single execution hazard barrier may not be enough to give
+- * it time to clear as seen in the Cause register.  4 time the
+- * pipeline depth seems reasonably conservative, and empirically
+- * works better in configurations with high CPU/bus clock ratios.
+- */
+-
+-#define compare_change_hazard() \
+-	do { \
+-		irq_disable_hazard(); \
+-		irq_disable_hazard(); \
+-		irq_disable_hazard(); \
+-		irq_disable_hazard(); \
+-	} while (0)
+-
+ int c0_compare_int_usable(void)
+ {
+ 	unsigned int delta;