strip the kernel version suffix from target directories, except for brcm-2.4 (the -2.4 will be included in the board name here). CONFIG_LINUX_<ver>_<board> becomes CONFIG_TARGET_<board>, same for profiles.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8653 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 685 insertions, 0 deletions

diff --git a/target/linux/amazon/files/drivers/serial/amazon_asc.c b/target/linux/amazon/files/drivers/serial/amazon_asc.c
new file mode 100644
index 000000000..7c17cb0f4
--- /dev/null
+++ b/target/linux/amazon/files/drivers/serial/amazon_asc.c
@@ -0,0 +1,685 @@
+/*
+ *  Driver for AMAZONASC serial ports
+ *
+ *  Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
+ *  Based on drivers/serial/serial_s3c2400.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ * Copyright (C) 2004 Infineon IFAP DC COM CPE
+ * Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org>
+ * Copyright (C) 2007 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/major.h>
+#include <linux/string.h>
+#include <linux/fcntl.h>
+#include <linux/ptrace.h>
+#include <linux/ioport.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/circ_buf.h>
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+#include <linux/console.h>
+#include <linux/sysrq.h>
+#include <linux/irq.h>
+
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/uaccess.h>
+#include <asm/bitops.h>
+#include <asm/amazon/amazon.h>
+#include <asm/amazon/irq.h>
+#include <asm/amazon/serial.h>
+
+#define PORT_AMAZONASC  111
+
+#include <linux/serial_core.h>
+
+#define UART_NR		1
+
+#define UART_DUMMY_UER_RX 1
+
+#define SERIAL_AMAZONASC_MAJOR	TTY_MAJOR
+#define CALLOUT_AMAZONASC_MAJOR	TTYAUX_MAJOR
+#define SERIAL_AMAZONASC_MINOR	64
+#define SERIAL_AMAZONASC_NR	UART_NR
+
+static void amazonasc_tx_chars(struct uart_port *port);
+extern void prom_printf(const char * fmt, ...);
+static struct uart_port amazonasc_ports[UART_NR];
+static struct uart_driver amazonasc_reg;
+static unsigned int uartclk = 0;
+extern unsigned int amazon_get_fpi_hz(void);
+
+static void amazonasc_stop_tx(struct uart_port *port)
+{
+	/* fifo underrun shuts up after firing once */
+	return;
+}
+
+static void amazonasc_start_tx(struct uart_port *port)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	amazonasc_tx_chars(port);
+	local_irq_restore(flags);
+
+	return;
+}
+
+static void amazonasc_stop_rx(struct uart_port *port)
+{
+	/* clear the RX enable bit */
+	amazon_writel(ASCWHBCON_CLRREN, AMAZON_ASC_WHBCON);
+}
+
+static void amazonasc_enable_ms(struct uart_port *port)
+{
+	/* no modem signals */
+	return;
+}
+
+static void
+amazonasc_rx_chars(struct uart_port *port)
+{
+	struct tty_struct *tty = port->info->tty;
+	unsigned int ch = 0, rsr = 0, fifocnt;
+
+	fifocnt = amazon_readl(AMAZON_ASC_FSTAT) & ASCFSTAT_RXFFLMASK;
+	while (fifocnt--)
+	{
+		u8 flag = TTY_NORMAL;
+		ch = amazon_readl(AMAZON_ASC_RBUF);
+		rsr = (amazon_readl(AMAZON_ASC_CON) & ASCCON_ANY) | UART_DUMMY_UER_RX;
+		tty_flip_buffer_push(tty);
+		port->icount.rx++;
+
+		/*
+		 * Note that the error handling code is
+		 * out of the main execution path
+		 */
+		if (rsr & ASCCON_ANY) {
+			if (rsr & ASCCON_PE) {
+				port->icount.parity++;
+				amazon_writel_masked(AMAZON_ASC_WHBCON, ASCWHBCON_CLRPE, ASCWHBCON_CLRPE);
+			} else if (rsr & ASCCON_FE) {
+				port->icount.frame++;
+				amazon_writel_masked(AMAZON_ASC_WHBCON, ASCWHBCON_CLRFE, ASCWHBCON_CLRFE);
+			}
+			if (rsr & ASCCON_OE) {
+				port->icount.overrun++;
+				amazon_writel_masked(AMAZON_ASC_WHBCON, ASCWHBCON_CLROE, ASCWHBCON_CLROE);
+			}
+
+			rsr &= port->read_status_mask;
+
+			if (rsr & ASCCON_PE)
+				flag = TTY_PARITY;
+			else if (rsr & ASCCON_FE)
+				flag = TTY_FRAME;
+		}
+
+		if ((rsr & port->ignore_status_mask) == 0)
+			tty_insert_flip_char(tty, ch, flag);
+
+		if (rsr & ASCCON_OE)
+			/*
+			 * Overrun is special, since it's reported
+			 * immediately, and doesn't affect the current
+			 * character
+			 */
+			tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+	}
+	if (ch != 0)
+		tty_flip_buffer_push(tty);
+
+	return;
+}
+
+
+static void amazonasc_tx_chars(struct uart_port *port)
+{
+	struct circ_buf *xmit = &port->info->xmit;
+
+	if (uart_tx_stopped(port)) {
+		amazonasc_stop_tx(port);
+		return;
+	}
+	
+	while (((amazon_readl(AMAZON_ASC_FSTAT) & ASCFSTAT_TXFFLMASK)
+			>> ASCFSTAT_TXFFLOFF) != AMAZONASC_TXFIFO_FULL)
+	{
+		if (port->x_char) {
+			amazon_writel(port->x_char, AMAZON_ASC_TBUF);
+			port->icount.tx++;
+			port->x_char = 0;
+			continue;
+		}
+
+		if (uart_circ_empty(xmit))
+			break;
+
+		amazon_writel(xmit->buf[xmit->tail], AMAZON_ASC_TBUF);
+		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+		port->icount.tx++;
+	}
+
+	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+		uart_write_wakeup(port);
+}
+
+static irqreturn_t amazonasc_tx_int(int irq, void *port)
+{
+	amazon_writel(ASC_IRNCR_TIR, AMAZON_ASC_IRNCR1);
+	amazonasc_start_tx(port);
+
+	/* clear any pending interrupts */
+	amazon_writel_masked(AMAZON_ASC_WHBCON, 
+			(ASCWHBCON_CLRPE | ASCWHBCON_CLRFE | ASCWHBCON_CLROE), 
+			(ASCWHBCON_CLRPE | ASCWHBCON_CLRFE | ASCWHBCON_CLROE));
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t amazonasc_er_int(int irq, void *port)
+{
+	/* clear any pending interrupts */
+	amazon_writel_masked(AMAZON_ASC_WHBCON, 
+			(ASCWHBCON_CLRPE | ASCWHBCON_CLRFE | ASCWHBCON_CLROE), 
+			(ASCWHBCON_CLRPE | ASCWHBCON_CLRFE | ASCWHBCON_CLROE));
+	
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t amazonasc_rx_int(int irq, void *port)
+{
+	amazon_writel(ASC_IRNCR_RIR, AMAZON_ASC_IRNCR1);
+	amazonasc_rx_chars((struct uart_port *) port);
+	return IRQ_HANDLED;
+}
+
+static u_int amazonasc_tx_empty(struct uart_port *port)
+{
+	int status;
+
+	/*
+	 * FSTAT tells exactly how many bytes are in the FIFO.
+	 * The question is whether we really need to wait for all
+	 * 16 bytes to be transmitted before reporting that the
+	 * transmitter is empty.
+	 */
+	status = amazon_readl(AMAZON_ASC_FSTAT) & ASCFSTAT_TXFFLMASK;
+	return status ? 0 : TIOCSER_TEMT;
+}
+
+static u_int amazonasc_get_mctrl(struct uart_port *port)
+{
+	/* no modem control signals - the readme says to pretend all are set */
+	return TIOCM_CTS|TIOCM_CAR|TIOCM_DSR;
+}
+
+static void amazonasc_set_mctrl(struct uart_port *port, u_int mctrl)
+{
+	/* no modem control - just return */
+	return;
+}
+
+static void amazonasc_break_ctl(struct uart_port *port, int break_state)
+{
+	/* no way to send a break */
+	return;
+}
+
+static int amazonasc_startup(struct uart_port *port)
+{
+	unsigned int con = 0;
+	unsigned long flags;
+	int retval;
+
+	/* this assumes: CON.BRS = CON.FDE = 0 */
+	if (uartclk == 0)
+		uartclk = amazon_get_fpi_hz();
+
+	amazonasc_ports[0].uartclk = uartclk;
+
+	local_irq_save(flags);
+
+	/* this setup was probably already done in u-boot */
+	/* ASC and GPIO Port 1 bits 3 and 4 share the same pins
+	 * P1.3 (RX) in, Alternate 10
+	 * P1.4 (TX) in, Alternate 10
+	 */
+	 amazon_writel_masked(AMAZON_GPIO_P1_DIR, 0x18, 0x10); 	//P1.4 output, P1.3 input
+	 amazon_writel_masked(AMAZON_GPIO_P1_ALTSEL0, 0x18, 0x18); 		//ALTSETL0 11
+	 amazon_writel_masked(AMAZON_GPIO_P1_ALTSEL1, 0x18, 0);	 	//ALTSETL1 00
+	 amazon_writel_masked(AMAZON_GPIO_P1_OD, 0x18, 0x10);
+	
+	/* set up the CLC */
+	amazon_writel_masked(AMAZON_ASC_CLC, AMAZON_ASC_CLC_DISS, 0);
+	amazon_writel_masked(AMAZON_ASC_CLC, ASCCLC_RMCMASK, 1 << ASCCLC_RMCOFFSET);
+	
+	/* asynchronous mode */
+	con = ASCCON_M_8ASYNC | ASCCON_FEN | ASCCON_OEN | ASCCON_PEN;
+	
+	/* choose the line - there's only one */
+	amazon_writel(0, AMAZON_ASC_PISEL);
+	amazon_writel(((AMAZONASC_TXFIFO_FL << ASCTXFCON_TXFITLOFF) & ASCTXFCON_TXFITLMASK) | ASCTXFCON_TXFEN | ASCTXFCON_TXFFLU, 
+		AMAZON_ASC_TXFCON);
+	amazon_writel(((AMAZONASC_RXFIFO_FL << ASCRXFCON_RXFITLOFF) & ASCRXFCON_RXFITLMASK) | ASCRXFCON_RXFEN | ASCRXFCON_RXFFLU, 
+		AMAZON_ASC_RXFCON);
+	wmb();
+	
+	amazon_writel_masked(AMAZON_ASC_CON, con, con);
+
+	retval = request_irq(AMAZONASC_RIR, amazonasc_rx_int, 0, "asc_rx", port);
+	if (retval){
+		printk("failed to request amazonasc_rx_int\n");
+		return retval;
+	}
+	retval = request_irq(AMAZONASC_TIR, amazonasc_tx_int, 0, "asc_tx", port);
+	if (retval){
+		printk("failed to request amazonasc_tx_int\n");
+		goto err1;
+	}
+
+	retval = request_irq(AMAZONASC_EIR, amazonasc_er_int, 0, "asc_er", port);
+	if (retval){
+		printk("failed to request amazonasc_er_int\n");
+		goto err2;
+	}
+	
+	local_irq_restore(flags);
+	return 0;
+
+err2:
+	free_irq(AMAZONASC_TIR, port);
+	
+err1:
+	free_irq(AMAZONASC_RIR, port);
+	local_irq_restore(flags);
+	return retval;
+}
+
+static void amazonasc_shutdown(struct uart_port *port)
+{
+	free_irq(AMAZONASC_RIR, port);
+	free_irq(AMAZONASC_TIR, port);
+	free_irq(AMAZONASC_EIR, port);
+	/*
+	 * disable the baudrate generator to disable the ASC
+	 */
+	amazon_writel(0, AMAZON_ASC_CON);
+
+	/* flush and then disable the fifos */
+	amazon_writel_masked(AMAZON_ASC_RXFCON, ASCRXFCON_RXFFLU, ASCRXFCON_RXFFLU);
+	amazon_writel_masked(AMAZON_ASC_RXFCON, ASCRXFCON_RXFEN, 0);
+	amazon_writel_masked(AMAZON_ASC_TXFCON, ASCTXFCON_TXFFLU, ASCTXFCON_TXFFLU);
+	amazon_writel_masked(AMAZON_ASC_TXFCON, ASCTXFCON_TXFEN, 0);
+}
+
+static void amazonasc_set_termios(struct uart_port *port, struct ktermios *new, struct ktermios *old)
+{
+	unsigned int cflag;
+	unsigned int iflag;
+	unsigned int baud, quot;
+	unsigned int con = 0;
+	unsigned long flags;
+
+	cflag = new->c_cflag;
+	iflag = new->c_iflag;
+
+	/* byte size and parity */
+	switch (cflag & CSIZE) {
+	/* 7 bits are always with parity */
+	case CS7: con = ASCCON_M_7ASYNCPAR; break;
+	/* the ASC only suports 7 and 8 bits */
+	case CS5:
+	case CS6:
+	default:
+		if (cflag & PARENB)
+			con = ASCCON_M_8ASYNCPAR;
+		else
+			con = ASCCON_M_8ASYNC;
+		break;
+	}
+	if (cflag & CSTOPB)
+		con |= ASCCON_STP;
+	if (cflag & PARENB) {
+		if (!(cflag & PARODD))
+			con &= ~ASCCON_ODD;
+		else
+			con |= ASCCON_ODD;
+	}
+
+	port->read_status_mask = ASCCON_OE;
+	if (iflag & INPCK)
+		port->read_status_mask |= ASCCON_FE | ASCCON_PE;
+	
+	port->ignore_status_mask = 0;
+	if (iflag & IGNPAR)
+		port->ignore_status_mask |= ASCCON_FE | ASCCON_PE;
+	
+	if (iflag & IGNBRK) {
+		/*
+		 * If we're ignoring parity and break indicators,
+		 * ignore overruns too (for real raw support).
+		 */
+		if (iflag & IGNPAR)
+			port->ignore_status_mask |= ASCCON_OE;
+	}
+
+	/*
+	 * Ignore all characters if CREAD is not set.
+	 */
+	if ((cflag & CREAD) == 0)
+		port->ignore_status_mask |= UART_DUMMY_UER_RX;
+
+	/* set error signals  - framing, parity  and overrun */
+	con |= ASCCON_FEN;
+	con |= ASCCON_OEN;
+	con |= ASCCON_PEN;
+	/* enable the receiver */
+	con |= ASCCON_REN;
+
+	/* block the IRQs */
+	local_irq_save(flags);
+
+	/* set up CON */
+	amazon_writel(con, AMAZON_ASC_CON);
+
+	/* Set baud rate - take a divider of 2 into account */
+    baud = uart_get_baud_rate(port, new, old, 0, port->uartclk/16);
+	quot = uart_get_divisor(port, baud);
+	quot = quot/2 - 1;
+
+	/* the next 3 probably already happened when we set CON above */
+	/* disable the baudrate generator */
+	amazon_writel_masked(AMAZON_ASC_CON, ASCCON_R, 0);
+	/* make sure the fractional divider is off */
+	amazon_writel_masked(AMAZON_ASC_CON, ASCCON_FDE, 0);
+	/* set up to use divisor of 2 */
+	amazon_writel_masked(AMAZON_ASC_CON, ASCCON_BRS, 0);
+	/* now we can write the new baudrate into the register */
+	amazon_writel(quot, AMAZON_ASC_BTR);
+	/* turn the baudrate generator back on */
+	amazon_writel_masked(AMAZON_ASC_CON, ASCCON_R, ASCCON_R);
+
+	local_irq_restore(flags);
+}
+
+static const char *amazonasc_type(struct uart_port *port)
+{
+	return port->type == PORT_AMAZONASC ? "AMAZONASC" : NULL;
+}
+
+/*
+ * Release the memory region(s) being used by 'port'
+ */
+static void amazonasc_release_port(struct uart_port *port)
+{
+	return;
+}
+
+/*
+ * Request the memory region(s) being used by 'port'
+ */
+static int amazonasc_request_port(struct uart_port *port)
+{
+	return 0;
+}
+
+/*
+ * Configure/autoconfigure the port.
+ */
+static void amazonasc_config_port(struct uart_port *port, int flags)
+{
+	if (flags & UART_CONFIG_TYPE) {
+		port->type = PORT_AMAZONASC;
+		amazonasc_request_port(port);
+	}
+}
+
+/*
+ * verify the new serial_struct (for TIOCSSERIAL).
+ */
+static int amazonasc_verify_port(struct uart_port *port, struct serial_struct *ser)
+{
+	int ret = 0;
+	if (ser->type != PORT_UNKNOWN && ser->type != PORT_AMAZONASC)
+		ret = -EINVAL;
+	if (ser->irq < 0 || ser->irq >= NR_IRQS)
+		ret = -EINVAL;
+	if (ser->baud_base < 9600)
+		ret = -EINVAL;
+	return ret;
+}
+
+static struct uart_ops amazonasc_pops = {
+	.tx_empty =		amazonasc_tx_empty,
+	.set_mctrl =	amazonasc_set_mctrl,
+	.get_mctrl =	amazonasc_get_mctrl,
+	.stop_tx =		amazonasc_stop_tx,
+	.start_tx =		amazonasc_start_tx,
+	.stop_rx =		amazonasc_stop_rx,
+	.enable_ms =	amazonasc_enable_ms,
+	.break_ctl =	amazonasc_break_ctl,
+	.startup =		amazonasc_startup,
+	.shutdown =		amazonasc_shutdown,
+	.set_termios =	amazonasc_set_termios,
+	.type =			amazonasc_type,
+	.release_port =	amazonasc_release_port,
+	.request_port =	amazonasc_request_port,
+	.config_port =	amazonasc_config_port,
+	.verify_port =	amazonasc_verify_port,
+};
+
+static struct uart_port amazonasc_ports[UART_NR] = {
+	{
+		membase:	(void *)AMAZON_ASC,
+		mapbase:	AMAZON_ASC,
+		iotype:		SERIAL_IO_MEM,
+		irq:		AMAZONASC_RIR, /* RIR */
+		uartclk:	0, /* filled in dynamically */
+		fifosize:	16,
+		unused:		{ AMAZONASC_TIR, AMAZONASC_EIR}, /* xmit/error/xmit-buffer-empty IRQ */
+		type:		PORT_AMAZONASC,
+		ops:		&amazonasc_pops,
+		flags:		ASYNC_BOOT_AUTOCONF,
+	},
+};
+
+static void amazonasc_console_write(struct console *co, const char *s, u_int count)
+{
+	int i, fifocnt;
+	unsigned long flags;
+	local_irq_save(flags);
+	for (i = 0; i < count;)
+	{
+		/* wait until the FIFO is not full */
+		do
+		{
+			fifocnt = (amazon_readl(AMAZON_ASC_FSTAT) & ASCFSTAT_TXFFLMASK)
+					>> ASCFSTAT_TXFFLOFF;
+		} while (fifocnt == AMAZONASC_TXFIFO_FULL);
+		if (s[i] == '\0')
+		{
+			break;
+		}
+		if (s[i] == '\n')
+		{
+			amazon_writel('\r', AMAZON_ASC_TBUF);
+			do
+			{
+				fifocnt = (amazon_readl(AMAZON_ASC_FSTAT) &
+				ASCFSTAT_TXFFLMASK) >> ASCFSTAT_TXFFLOFF;
+			} while (fifocnt == AMAZONASC_TXFIFO_FULL);
+		}
+		amazon_writel(s[i], AMAZON_ASC_TBUF);
+		i++;
+	} 
+
+	local_irq_restore(flags);
+}
+
+static void __init
+amazonasc_console_get_options(struct uart_port *port, int *baud, int *parity, int *bits)
+{
+	u_int lcr_h;
+
+	lcr_h = amazon_readl(AMAZON_ASC_CON);
+	/* do this only if the ASC is turned on */
+	if (lcr_h & ASCCON_R) {
+		u_int quot, div, fdiv, frac;
+
+		*parity = 'n';
+		if ((lcr_h & ASCCON_MODEMASK) == ASCCON_M_7ASYNCPAR ||
+		            (lcr_h & ASCCON_MODEMASK) == ASCCON_M_8ASYNCPAR) {
+			if (lcr_h & ASCCON_ODD)
+				*parity = 'o';
+			else
+				*parity = 'e';
+		}
+
+		if ((lcr_h & ASCCON_MODEMASK) == ASCCON_M_7ASYNCPAR)
+			*bits = 7;
+		else
+			*bits = 8;
+
+		quot = amazon_readl(AMAZON_ASC_BTR) + 1;
+		
+		/* this gets hairy if the fractional divider is used */
+		if (lcr_h & ASCCON_FDE)
+		{
+			div = 1;
+			fdiv = amazon_readl(AMAZON_ASC_FDV);
+			if (fdiv == 0)
+				fdiv = 512;
+			frac = 512;
+		}
+		else
+		{
+			div = lcr_h & ASCCON_BRS ? 3 : 2;
+			fdiv = frac = 1;
+		}
+		/*
+		 * This doesn't work exactly because we use integer
+		 * math to calculate baud which results in rounding
+		 * errors when we try to go from quot -> baud !!
+		 * Try to make this work for both the fractional divider
+		 * and the simple divider. Also try to avoid rounding
+		 * errors using integer math.
+		 */
+		
+		*baud = frac * (port->uartclk / (div * 512 * 16 * quot));
+		if (*baud > 1100 && *baud < 2400)
+			*baud = 1200;
+		if (*baud > 2300 && *baud < 4800)
+			*baud = 2400;
+		if (*baud > 4700 && *baud < 9600)
+			*baud = 4800;
+		if (*baud > 9500 && *baud < 19200)
+			*baud = 9600;
+		if (*baud > 19000 && *baud < 38400)
+			*baud = 19200;
+		if (*baud > 38400 && *baud < 57600)
+			*baud = 38400;
+		if (*baud > 57600 && *baud < 115200)
+			*baud = 57600;
+		if (*baud > 115200 && *baud < 230400)
+			*baud = 115200;
+	}
+}
+
+static int __init amazonasc_console_setup(struct console *co, char *options)
+{
+	struct uart_port *port;
+	int baud = 115200;
+	int bits = 8;
+	int parity = 'n';
+	int flow = 'n';
+
+	/* this assumes: CON.BRS = CON.FDE = 0 */
+	if (uartclk == 0)
+		uartclk = amazon_get_fpi_hz();
+	co->index = 0;	
+	port = &amazonasc_ports[0];
+	amazonasc_ports[0].uartclk = uartclk;
+	amazonasc_ports[0].type = PORT_AMAZONASC;
+
+	if (options){
+		uart_parse_options(options, &baud, &parity, &bits, &flow);
+	}
+
+	return uart_set_options(port, co, baud, parity, bits, flow);
+}
+
+static struct uart_driver amazonasc_reg;
+static struct console amazonasc_console = {
+	name:		"ttyS",
+	write:		amazonasc_console_write,
+	device:		uart_console_device,
+	setup:		amazonasc_console_setup,
+	flags:		CON_PRINTBUFFER,
+	index:		-1,
+	data:		&amazonasc_reg,
+};
+
+static int __init amazonasc_console_init(void)
+{
+	register_console(&amazonasc_console);
+	return 0;
+}
+console_initcall(amazonasc_console_init);
+
+static struct uart_driver amazonasc_reg = {
+	.owner =			THIS_MODULE,
+	.driver_name = 		"serial",
+	.dev_name =			"ttyS",
+	.major =			TTY_MAJOR,
+	.minor =			64,
+	.nr =				UART_NR,
+	.cons =				&amazonasc_console,
+};
+
+static int __init amazonasc_init(void)
+{
+	unsigned char res;
+	uart_register_driver(&amazonasc_reg);
+	res = uart_add_one_port(&amazonasc_reg, &amazonasc_ports[0]);
+	return res;
+}
+
+static void __exit amazonasc_exit(void)
+{
+	uart_unregister_driver(&amazonasc_reg);
+}
+
+module_init(amazonasc_init);
+module_exit(amazonasc_exit);
+
+MODULE_AUTHOR("Gary Jennejohn, Felix Fietkau, John Crispin");
+MODULE_DESCRIPTION("MIPS AMAZONASC serial port driver");
+MODULE_LICENSE("GPL");