[adm5120] preliminary support for 2.6.28 (based on the patches by Alexandros C. Couloumbis)

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14189 3c298f89-4303-0410-b956-a3cf2f4a3e73

6 files changed, 443 insertions, 0 deletions

diff --git a/target/linux/adm5120/files-2.6.28/arch/mips/include/asm/mach-adm5120/prom/admboot.h b/target/linux/adm5120/files-2.6.28/arch/mips/include/asm/mach-adm5120/prom/admboot.h
new file mode 100644
index 000000000..fa42bf714
--- /dev/null
+++ b/target/linux/adm5120/files-2.6.28/arch/mips/include/asm/mach-adm5120/prom/admboot.h
@@ -0,0 +1,17 @@
+/*
+ *  ADMBoot specific definitions
+ *
+ *  Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ */
+
+#ifndef _ADMBOOT_H
+#define _ADMBOOT_H
+
+extern int admboot_get_mac_base(u32 offset, u32 len, u8 *mac) __init;
+
+#endif /* _ADMBOOT_H */
diff --git a/target/linux/adm5120/files-2.6.28/arch/mips/include/asm/mach-adm5120/prom/cfe.h b/target/linux/adm5120/files-2.6.28/arch/mips/include/asm/mach-adm5120/prom/cfe.h
new file mode 100644
index 000000000..0cb3eee70
--- /dev/null
+++ b/target/linux/adm5120/files-2.6.28/arch/mips/include/asm/mach-adm5120/prom/cfe.h
@@ -0,0 +1,18 @@
+/*
+ *  Broadcom's CFE definitions
+ *
+ *  Copyright (C) 2006-2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ */
+
+#ifndef _PROM_CFE_H_
+#define _PROM_CFE_H_
+
+extern int cfe_present(void) __init;
+extern char *cfe_getenv(char *);
+
+#endif /*_PROM_CFE_H_*/
diff --git a/target/linux/adm5120/files-2.6.28/arch/mips/include/asm/mach-adm5120/prom/generic.h b/target/linux/adm5120/files-2.6.28/arch/mips/include/asm/mach-adm5120/prom/generic.h
new file mode 100644
index 000000000..778df2467
--- /dev/null
+++ b/target/linux/adm5120/files-2.6.28/arch/mips/include/asm/mach-adm5120/prom/generic.h
@@ -0,0 +1,18 @@
+/*
+ *  Generic prom definitions
+ *
+ *  Copyright (C) 2006-2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ */
+
+#ifndef _PROM_GENERIC_H_
+#define _PROM_GENERIC_H_
+
+extern int generic_prom_present(void) __init;
+extern char *generic_prom_getenv(char *);
+
+#endif /*_PROM_GENERIC_H_*/
diff --git a/target/linux/adm5120/files-2.6.28/arch/mips/include/asm/mach-adm5120/prom/myloader.h b/target/linux/adm5120/files-2.6.28/arch/mips/include/asm/mach-adm5120/prom/myloader.h
new file mode 100644
index 000000000..ea8db81ed
--- /dev/null
+++ b/target/linux/adm5120/files-2.6.28/arch/mips/include/asm/mach-adm5120/prom/myloader.h
@@ -0,0 +1,179 @@
+/*
+ *  Compex's MyLoader specific definitions
+ *
+ *  Copyright (C) 2006-2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ */
+
+#ifndef _MYLOADER_H_
+#define _MYLOADER_H_
+
+/*
+ * Firmware file format:
+ *
+ *	<header>
+ *	[<block descriptor 0>]
+ *	...
+ *	[<block descriptor n>]
+ *	<null block descriptor>
+ *	[<block data 0>]
+ *	...
+ *	[<block data n>]
+ *
+ *
+ */
+
+/* Myloader specific magic numbers */
+#define MYLO_MAGIC_FIRMWARE	0x4C594D00
+#define MYLO_MAGIC_20021103	0x20021103
+#define MYLO_MAGIC_20021107	0x20021107
+
+#define MYLO_MAGIC_SYS_PARAMS	MYLO_MAGIC_20021107
+#define MYLO_MAGIC_PARTITIONS	MYLO_MAGIC_20021103
+#define MYLO_MAGIC_BOARD_PARAMS	MYLO_MAGIC_20021103
+
+/*
+ * Addresses of the data structures provided by MyLoader
+ */
+#define MYLO_MIPS_SYS_PARAMS	0x80000800	/* System Parameters */
+#define MYLO_MIPS_BOARD_PARAMS	0x80000A00	/* Board Parameters */
+#define MYLO_MIPS_PARTITIONS	0x80000C00	/* Partition Table */
+#define MYLO_MIPS_BOOT_PARAMS	0x80000E00	/* Boot Parameters */
+
+/* Vendor ID's (seems to be same as the PCI vendor ID's) */
+#define VENID_COMPEX		0x11F6
+
+/* Devices based on the ADM5120 */
+#define DEVID_COMPEX_NP27G	0x0078
+#define DEVID_COMPEX_NP28G	0x044C
+#define DEVID_COMPEX_NP28GHS	0x044E
+#define DEVID_COMPEX_WP54Gv1C	0x0514
+#define DEVID_COMPEX_WP54G	0x0515
+#define DEVID_COMPEX_WP54AG	0x0546
+#define DEVID_COMPEX_WPP54AG	0x0550
+#define DEVID_COMPEX_WPP54G	0x0555
+
+/* Devices based on the IXP422 */
+#define DEVID_COMPEX_WP18	0x047E
+#define DEVID_COMPEX_NP18A	0x0489
+
+/* Other devices */
+#define DEVID_COMPEX_NP26G8M	0x03E8
+#define DEVID_COMPEX_NP26G16M	0x03E9
+
+struct mylo_fw_header {
+	uint32_t	magic;	/* must be MYLO_MAGIC_FIRMWARE */
+	uint32_t	crc;	/* CRC of the whole firmware */
+	uint32_t	res0;	/* unknown/unused */
+	uint32_t	res1;	/* unknown/unused */
+	uint16_t	vid;	/* vendor ID */
+	uint16_t	did;	/* device ID */
+	uint16_t	svid;	/* sub vendor ID */
+	uint16_t	sdid;	/* sub device ID */
+	uint32_t	rev;	/* device revision */
+	uint32_t	fwhi;	/* FIXME: firmware version high? */
+	uint32_t	fwlo;	/* FIXME: firmware version low? */
+	uint32_t	flags;	/* firmware flags */
+};
+
+#define FW_FLAG_BOARD_PARAMS_WP	0x01 /* board parameters are write protected */
+#define FW_FLAG_BOOT_SECTOR_WE	0x02 /* enable of write boot sectors (below 64K) */
+
+struct mylo_fw_blockdesc {
+	uint32_t	type;	/* block type */
+	uint32_t	addr;	/* relative address to flash start */
+	uint32_t	dlen;	/* size of block data in bytes */
+	uint32_t	blen;	/* total size of block in bytes */
+};
+
+#define FW_DESC_TYPE_UNUSED	0
+#define FW_DESC_TYPE_USED	1
+
+struct mylo_partition {
+	uint16_t	flags;	/* partition flags */
+	uint16_t	type;	/* type of the partition */
+	uint32_t	addr;	/* relative address of the partition from the
+				   flash start */
+	uint32_t	size;	/* size of the partition in bytes */
+	uint32_t	param;	/* if this is the active partition, the
+				   MyLoader load code to this address */
+};
+
+#define PARTITION_FLAG_ACTIVE	0x8000 /* this is the active partition,
+					* MyLoader loads firmware from here */
+#define PARTITION_FLAG_ISRAM	0x2000 /* FIXME: this is a RAM partition? */
+#define PARTIIION_FLAG_RAMLOAD	0x1000 /* FIXME: load this partition into the RAM? */
+#define PARTITION_FLAG_PRELOAD	0x0800 /* the partition data preloaded to RAM
+					* before decompression */
+#define PARTITION_FLAG_HAVEHDR  0x0002 /* the partition data have a header */
+
+#define PARTITION_TYPE_FREE	0
+#define PARTITION_TYPE_USED	1
+
+#define MYLO_MAX_PARTITIONS	8	/* maximum number of partitions in the
+					   partition table */
+
+struct mylo_partition_table {
+	uint32_t	magic;	/* must be MYLO_MAGIC_PARTITIONS */
+	uint32_t	res0;	/* unknown/unused */
+	uint32_t	res1;	/* unknown/unused */
+	uint32_t 	res2;	/* unknown/unused */
+	struct mylo_partition partitions[MYLO_MAX_PARTITIONS];
+};
+
+struct mylo_partition_header {
+	uint32_t	len;	/* length of the partition data */
+	uint32_t	crc;	/* CRC value of the partition data */
+};
+
+struct mylo_system_params {
+	uint32_t	magic;	/* must be MYLO_MAGIC_SYS_PARAMS */
+	uint32_t	res0;
+	uint32_t	res1;
+	uint32_t	mylo_ver;
+	uint16_t	vid;	/* Vendor ID */
+	uint16_t	did;	/* Device ID */
+	uint16_t	svid;	/* Sub Vendor ID */
+	uint16_t	sdid;	/* Sub Device ID */
+	uint32_t	rev;	/* device revision */
+	uint32_t	fwhi;
+	uint32_t	fwlo;
+	uint32_t	tftp_addr;
+	uint32_t	prog_start;
+	uint32_t	flash_size;	/* Size of boot FLASH in bytes */
+	uint32_t	dram_size;	/* Size of onboard RAM in bytes */
+};
+
+
+struct mylo_eth_addr {
+	uint8_t	mac[6];
+	uint8_t	csum[2];
+};
+
+#define MYLO_ETHADDR_COUNT	8	/* maximum number of ethernet address
+					   in the board parameters */
+
+struct mylo_board_params {
+	uint32_t	magic;	/* must be MYLO_MAGIC_BOARD_PARAMS */
+	uint32_t	res0;
+	uint32_t	res1;
+	uint32_t	res2;
+	struct mylo_eth_addr addr[MYLO_ETHADDR_COUNT];
+};
+
+struct myloader_info {
+	u32	vid;
+	u32	did;
+	u32	svid;
+	u32	sdid;
+	uint8_t macs[MYLO_ETHADDR_COUNT][6];
+};
+
+extern struct myloader_info myloader_info;
+extern int myloader_present(void) __init;
+
+#endif /* _MYLOADER_H_*/
diff --git a/target/linux/adm5120/files-2.6.28/arch/mips/include/asm/mach-adm5120/prom/routerboot.h b/target/linux/adm5120/files-2.6.28/arch/mips/include/asm/mach-adm5120/prom/routerboot.h
new file mode 100644
index 000000000..d5ad513d5
--- /dev/null
+++ b/target/linux/adm5120/files-2.6.28/arch/mips/include/asm/mach-adm5120/prom/routerboot.h
@@ -0,0 +1,125 @@
+/*
+ *  Mikrotik's RouterBOOT definitions
+ *
+ *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ */
+
+#ifndef _ROUTERBOOT_H
+#define _ROUTERBOOT_H
+
+#define RB_MAC_SIZE		6
+
+struct rb_bios_settings {
+	u32	hs_offs; /* hard settings offset */
+	u32	hs_size; /* hard settings size */
+	u32	fw_offs; /* firmware offset */
+	u32	ss_offs; /* soft settings offset */
+	u32	ss_size; /* soft settings size */
+};
+
+struct rb_hard_settings {
+	char	*name;		/* board name */
+	char	*bios_ver;	/* BIOS version */
+	u32	mem_size;	/* memory size in bytes */
+	u32	mac_count;	/* number of mac addresses */
+	u8	*mac_base;	/* mac address base */
+};
+
+/*
+ * Magic numbers
+ */
+#define RB_MAGIC_HARD	0x64726148 /* "Hard" */
+#define RB_MAGIC_SOFT	0x74666F53 /* "Soft" */
+#define RB_MAGIC_DAWN	0x6E776144 /* "Dawn" */
+
+#define RB_ID_TERMINATOR	0
+
+/*
+ * ID values for Hardware settings
+ */
+#define RB_ID_HARD_01		1
+#define RB_ID_HARD_02		2
+#define RB_ID_FLASH_INFO	3
+#define RB_ID_MAC_ADDRESS_PACK	4
+#define RB_ID_BOARD_NAME	5
+#define RB_ID_BIOS_VERSION	6
+#define RB_ID_HARD_07		7
+#define RB_ID_SDRAM_TIMINGS	8
+#define RB_ID_DEVICE_TIMINGS	9
+#define RB_ID_SOFTWARE_ID	10
+#define RB_ID_SERIAL_NUMBER	11
+#define RB_ID_HARD_12		12
+#define RB_ID_MEMORY_SIZE	13
+#define RB_ID_MAC_ADDRESS_COUNT	14
+
+/*
+ * ID values for Software settings
+ */
+#define RB_ID_UART_SPEED	1
+#define RB_ID_BOOT_DELAY	2
+#define RB_ID_BOOT_DEVICE	3
+#define RB_ID_BOOT_KEY		4
+#define RB_ID_CPU_MODE		5
+#define RB_ID_FW_VERSION	6
+#define RB_ID_SOFT_07		7
+#define RB_ID_SOFT_08		8
+#define RB_ID_BOOT_PROTOCOL	9
+#define RB_ID_SOFT_10		10
+#define RB_ID_SOFT_11		11
+
+/*
+ * UART_SPEED values
+ */
+#define RB_UART_SPEED_115200	0
+#define RB_UART_SPEED_57600	1
+#define RB_UART_SPEED_38400	2
+#define RB_UART_SPEED_19200	3
+#define RB_UART_SPEED_9600	4
+#define RB_UART_SPEED_4800	5
+#define RB_UART_SPEED_2400	6
+#define RB_UART_SPEED_1200	7
+
+/*
+ * BOOT_DELAY values
+ */
+#define RB_BOOT_DELAY_0SEC	0
+#define RB_BOOT_DELAY_1SEC	1
+#define RB_BOOT_DELAY_2SEC	2
+
+/*
+ * BOOT_DEVICE values
+ */
+#define RB_BOOT_DEVICE_ETHER	0
+#define RB_BOOT_DEVICE_NANDETH	1
+#define RB_BOOT_DEVICE_ETHONCE	2
+#define RB_BOOT_DEVICE_NANDONLY	3
+
+/*
+ * BOOT_KEY values
+ */
+#define RB_BOOT_KEY_ANY		0
+#define RB_BOOT_KEY_DEL		1
+
+/*
+ * CPU_MODE values
+ */
+#define RB_CPU_MODE_POWERSAVE	0
+#define RB_CPU_MODE_REGULAR	1
+
+/*
+ * BOOT_PROTOCOL values
+ */
+#define RB_BOOT_PROTOCOL_BOOTP	0
+#define RB_BOOT_PROTOCOL_DHCP	1
+
+extern int routerboot_present(void) __init;
+extern char *routerboot_get_boardname(void);
+
+extern struct rb_hard_settings rb_hs;
+
+#endif /* _ROUTERBOOT_H */
diff --git a/target/linux/adm5120/files-2.6.28/arch/mips/include/asm/mach-adm5120/prom/zynos.h b/target/linux/adm5120/files-2.6.28/arch/mips/include/asm/mach-adm5120/prom/zynos.h
new file mode 100644
index 000000000..d1e3e5b94
--- /dev/null
+++ b/target/linux/adm5120/files-2.6.28/arch/mips/include/asm/mach-adm5120/prom/zynos.h
@@ -0,0 +1,86 @@
+/*
+ *  ZyNOS (ZyXEL's Networking OS) definitions
+ *
+ *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ */
+
+#ifndef _ZYNOS_H
+#define _ZYNOS_H
+
+#define ZYNOS_NAME_LEN		32
+#define ZYNOS_FEAT_BYTES	22
+#define ZYNOS_MAC_LEN		6
+
+struct zynos_board_info {
+	unsigned char	vendor[ZYNOS_NAME_LEN];
+	unsigned char	product[ZYNOS_NAME_LEN];
+	u32		bootext_addr;
+	u32		res0;
+	u16		board_id;
+	u8		res1[6];
+	u8		feat_other[ZYNOS_FEAT_BYTES];
+	u8		feat_main;
+	u8		res2;
+	u8		mac[ZYNOS_MAC_LEN];
+	u8		country;
+	u8		dbgflag;
+} __attribute__ ((packed));
+
+/*
+ * Vendor IDs
+ */
+#define ZYNOS_VENDOR_ID_ZYXEL	0
+#define ZYNOS_VENDOR_ID_NETGEAR	1
+#define ZYNOS_VENDOR_ID_DLINK	2
+#define ZYNOS_VENDOR_ID_OTHER	3
+#define ZYNOS_VENDOR_ID_LUCENT	4
+
+/*
+ * Vendor names
+ */
+#define ZYNOS_VENDOR_DLINK	"D-Link"
+#define ZYNOS_VENDOR_LUCENT	"LUCENT"
+#define ZYNOS_VENDOR_NETGEAR	"NetGear"
+#define ZYNOS_VENDOR_ZYXEL	"ZyXEL"
+
+/*
+ * Board IDs (big-endian)
+ */
+#define ZYNOS_BOARD_ES2108	0x00F2	/* Ethernet Switch 2108 */
+#define ZYNOS_BOARD_ES2108F	0x01AF	/* Ethernet Switch 2108-F */
+#define ZYNOS_BOARD_ES2108G	0x00F3	/* Ethernet Switch 2108-G */
+#define ZYNOS_BOARD_ES2108LC	0x00FC	/* Ethernet Switch 2108-LC */
+#define ZYNOS_BOARD_ES2108PWR	0x00F4	/* Ethernet Switch 2108PWR */
+#define ZYNOS_BOARD_HS100	0x9FF1	/* HomeSafe 100/100W */
+#define ZYNOS_BOARD_P334	0x9FF5	/* Prestige 334 */
+#define ZYNOS_BOARD_P334U	0x9FDD	/* Prestige 334U */
+#define ZYNOS_BOARD_P334W	0x9FF3	/* Prestige 334W */
+#define ZYNOS_BOARD_P334WH	0x00E0	/* Prestige 334WH */
+#define ZYNOS_BOARD_P334WHD	0x00E1	/* Prestige 334WHD */
+#define ZYNOS_BOARD_P334WT	0x9FEF	/* Prestige 334WT */
+#define ZYNOS_BOARD_P334WT_ALT	0x9F02	/* Prestige 334WT alternative*/
+#define ZYNOS_BOARD_P335	0x9FED	/* Prestige 335/335WT */
+#define ZYNOS_BOARD_P335PLUS	0x0025	/* Prestige 335Plus */
+#define ZYNOS_BOARD_P335U	0x9FDC	/* Prestige 335U */
+
+/*
+ * Some magic numbers (big-endian)
+ */
+#define ZYNOS_MAGIC_DBGAREA1	0x48646267	/* "Hdbg" */
+#define ZYNOS_MAGIC_DBGAREA2	0x61726561	/* "area" */
+
+struct bootbase_info {
+	u16		vendor_id;
+	u16		board_id;
+	u8		mac[6];
+};
+
+extern struct bootbase_info bootbase_info;
+extern int bootbase_present(void) __init;
+
+#endif /* _ZYNOS_H */