diff options
author | blogic <blogic@3c298f89-4303-0410-b956-a3cf2f4a3e73> | 2011-07-06 10:36:47 +0000 |
---|---|---|
committer | blogic <blogic@3c298f89-4303-0410-b956-a3cf2f4a3e73> | 2011-07-06 10:36:47 +0000 |
commit | dd809af4b35e1625fdc9ee060eec2f2a44358602 (patch) | |
tree | ebfcac5cf5a455e50e7a1d09615122aeefb68035 /package/uboot-lantiq/files/board | |
parent | f03072225ee57c5159d24edcac5b6f1c3b976167 (diff) |
add support for gigaset SX76X to uboot-lantiq
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27488 3c298f89-4303-0410-b956-a3cf2f4a3e73
Diffstat (limited to 'package/uboot-lantiq/files/board')
-rw-r--r-- | package/uboot-lantiq/files/board/infineon/easy50712/danube.c | 51 |
1 files changed, 47 insertions, 4 deletions
diff --git a/package/uboot-lantiq/files/board/infineon/easy50712/danube.c b/package/uboot-lantiq/files/board/infineon/easy50712/danube.c index 0b33a3ad4..51b7577ed 100644 --- a/package/uboot-lantiq/files/board/infineon/easy50712/danube.c +++ b/package/uboot-lantiq/files/board/infineon/easy50712/danube.c @@ -180,6 +180,7 @@ int checkboard (void) switch (part_num) { case 0x129: + case 0x12B: case 0x12D: puts("Danube/Twinpass/Vinax-VE "); break; @@ -233,6 +234,19 @@ static int external_switch_init(void) unsigned short chipid0=0xdead, chipid1=0xbeef; static char * const name = "lq_cpe_eth"; +#ifdef CONFIG_SWITCH_PORT0 + *DANUBE_GPIO_P0_ALTSEL0 &= ~(1<<CONFIG_SWITCH_PIN); + *DANUBE_GPIO_P0_ALTSEL1 &= ~(1<<CONFIG_SWITCH_PIN); + *DANUBE_GPIO_P0_OD |= (1<<CONFIG_SWITCH_PIN); + *DANUBE_GPIO_P0_DIR |= (1<<CONFIG_SWITCH_PIN); + *DANUBE_GPIO_P0_OUT |= (1<<CONFIG_SWITCH_PIN); +#elif defined(CONFIG_SWITCH_PORT1) + *DANUBE_GPIO_P1_ALTSEL0 &= ~(1<<CONFIG_SWITCH_PIN); + *DANUBE_GPIO_P1_ALTSEL1 &= ~(1<<CONFIG_SWITCH_PIN); + *DANUBE_GPIO_P1_OD |= (1<<CONFIG_SWITCH_PIN); + *DANUBE_GPIO_P1_DIR |= (1<<CONFIG_SWITCH_PIN); + *DANUBE_GPIO_P1_OUT |= (1<<CONFIG_SWITCH_PIN); +#endif #ifdef CLK_OUT2_25MHZ *DANUBE_GPIO_P0_DIR=0x0000ae78; *DANUBE_GPIO_P0_ALTSEL0=0x00008078; @@ -245,12 +259,12 @@ static int external_switch_init(void) /* earlier no valid response is available, at least on Twinpass & Tantos @ 111MHz, M4530 platform */ udelay(100000); - debug("\nsearching for Samurai switch ... "); + printf("\nsearching for Samurai switch ... "); if ( (miiphy_read(name, PHYADDR(SAMURAI_ID_REG0), &chipid0)==0) && (miiphy_read(name, PHYADDR(SAMURAI_ID_REG1), &chipid1)==0) ) { if (((chipid0 & 0xFFF0) == ID_SAMURAI_0) && ((chipid1 & 0x000F) == ID_SAMURAI_1)) { - debug("found"); + printf("found"); /* enable "Crossover Auto Detect" + defaults */ /* P0 */ @@ -274,10 +288,11 @@ static int external_switch_init(void) } } - debug("\nsearching for TANTOS switch ... "); + printf("%04X %04x\n", chipid0, chipid1); + printf("\nsearching for TANTOS switch ... "); if (miiphy_read(name, PHYADDR(0x101), &chipid0) == 0) { if (chipid0 == ID_TANTOS) { - debug("found"); + printf("found"); /* P5 Basic Control: Force Link Up */ miiphy_write(name, PHYADDR(0xA1), 0x0004); @@ -315,8 +330,36 @@ static int external_switch_init(void) } #endif /* CONFIG_EXTRA_SWITCH */ +int board_gpio_init(void) +{ +#ifdef CONFIG_BUTTON_PORT0 + *DANUBE_GPIO_P0_ALTSEL0 &= ~(1<<CONFIG_BUTTON_PIN); + *DANUBE_GPIO_P0_ALTSEL1 &= ~(1<<CONFIG_BUTTON_PIN); + *DANUBE_GPIO_P0_DIR &= ~(1<<CONFIG_BUTTON_PIN); + if(!!(*DANUBE_GPIO_P0_IN & (1<<CONFIG_BUTTON_PIN)) == CONFIG_BUTTON_LEVEL) + { + printf("button is pressed\n"); + setenv("bootdelay", "0"); + setenv("bootcmd", "httpd"); + } +#elif defined(CONFIG_BUTTON_PORT1) + *DANUBE_GPIO_P1_ALTSEL0 &= ~(1<<CONFIG_BUTTON_PIN); + *DANUBE_GPIO_P1_ALTSEL1 &= ~(1<<CONFIG_BUTTON_PIN); + *DANUBE_GPIO_P1_DIR &= ~(1<<CONFIG_BUTTON_PIN); + if(!!(*DANUBE_GPIO_P1_IN & (1<<CONFIG_BUTTON_PIN)) == CONFIG_BUTTON_LEVEL) + { + printf("button is pressed\n"); + setenv("bootdelay", "0"); + setenv("bootcmd", "httpd"); + } +#endif +} + int board_eth_init(bd_t *bis) { + + board_gpio_init(); + #if defined(CONFIG_IFX_ETOP) *DANUBE_PMU_PWDCR &= 0xFFFFEFDF; |