move more extra packages from ./trunk to ./packages

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@12359 3c298f89-4303-0410-b956-a3cf2f4a3e73

17 files changed, 0 insertions, 1494 deletions

diff --git a/package/strongswan/Makefile b/package/strongswan/Makefile
deleted file mode 100644
index 65a77bef5..000000000
--- a/package/strongswan/Makefile
+++ /dev/null
@@ -1,98 +0,0 @@
-# 
-# Copyright (C) 2006 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-# $Id$
-
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/kernel.mk
-
-PKG_NAME:=strongswan
-PKG_VERSION:=2.8.2
-PKG_RELEASE:=2
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.bz2
-PKG_SOURCE_URL:=http://download.strongswan.org/
-PKG_MD5SUM:=57427f5b48123851a73b10d78dd4f8d6
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/strongswan/Default
-  TITLE:=strongSwan
-  DEPENDS:=@LINUX_2_4
-  URL:=http://www.strongswan.org/
-endef
-
-define Package/strongswan/Default/description
- strongSwan is an IPsec implementation for Linux.
-endef
-
-define Package/strongswan
-$(call Package/strongswan/Default)
-  SECTION:=net
-  CATEGORY:=Network
-  DEPENDS:=+kmod-strongswan +libgmp @LINUX_2_4
-  TITLE+= (daemon)
-endef
-
-define Package/strongswan/description
-$(call Package/strongswan/Default/description)
- This package contains the strongSwan user-land daemon.
-endef
-
-define KernelPackage/strongswan
-$(call Package/strongswan/Default)
-  SUBMENU:=Network Support
-  TITLE+= (kernel module)
-  DEPENDS:=@LINUX_2_4
-  FILES:=$(PKG_BUILD_DIR)/linux/net/ipsec/ipsec.$(LINUX_KMOD_SUFFIX)
-  AUTOLOAD:=$(call AutoLoad,50,ipsec)
-endef
-
-define KernelPackage/strongswan/description
-$(call Package/strongswan/Default/description)
- This package contains the strongSwan kernel module.
-endef
-
-PKG_MAKE_OPTS:= \
-		LINUX_RELEASE="$(LINUX_RELEASE)" \
-		KERNELSRC="$(LINUX_DIR)" \
-		ARCH="$(LINUX_KARCH)" \
-		CROSS_COMPILE="$(TARGET_CROSS)" \
-		USERCOMPILE="$(TARGET_CFLAGS) -I./linux/include $(TARGET_CPPFLAGS) $(TARGET_LDFLAGS)" \
-		IPSECDIR="/usr/lib/ipsec" \
-		INC_USRLOCAL="/usr" \
-
-define Build/Compile
-	$(MAKE) -C $(PKG_BUILD_DIR) \
-		$(TARGET_CONFIGURE_OPTS) \
-		$(PKG_MAKE_OPTS) \
-		LDFLAGS="$(TARGET_LDFLAGS)" \
-		DESTDIR="$(PKG_INSTALL_DIR)" \
-		programs module install
-endef
-
-define Package/strongswan/install
-	$(CP) $(PKG_INSTALL_DIR)/* $(1)
-	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_DIR) $(1)/etc/config
-	$(INSTALL_DIR) $(1)/etc/cron.tick
-	$(INSTALL_DIR) $(1)/etc/hotplug.d/iface
-	$(INSTALL_DIR) $(1)/etc/hotplug.d/button
-	$(INSTALL_BIN) ./files/ipsec.init   $(1)/etc/init.d/ipsec
-	$(INSTALL_BIN) ./files/ipsec.cron   $(1)/etc/cron.tick/ipsec-wakeup
-	$(INSTALL_BIN) ./files/ipsec.iface  $(1)/etc/hotplug.d/iface/65-ipsec
-	$(INSTALL_BIN) ./files/ipsec.button $(1)/etc/hotplug.d/button/65-ipsec
-	$(INSTALL_DATA) ./files/ipsec.config $(1)/etc/config/ipsec
-	$(INSTALL_DATA) ./files/ipsec.conf $(1)/etc/ipsec.conf
-	rm -rf $(1)/usr/share
-	rm -rf $(1)/usr/man
-	rm -rf $(1)/var
-	rm -rf $(1)/etc/rc.d
-	find $(1) -name \*.old | xargs rm -rf
-endef
-
-$(eval $(call BuildPackage,strongswan))
-$(eval $(call KernelPackage,strongswan))
diff --git a/package/strongswan/files/ipsec.button b/package/strongswan/files/ipsec.button
deleted file mode 100644
index 9bd902356..000000000
--- a/package/strongswan/files/ipsec.button
+++ /dev/null
@@ -1,34 +0,0 @@
-#!/bin/sh
-
-# snarf the code that loads the config values
-# since we also load the functions, might as well save the shell calls
-. /etc/init.d/ipsec
-
-[ -n "$IPSEC_RESET_BUTTON" -a "$BUTTON" = "$IPSEC_RESET_BUTTON" ] || exit
-
-if [ ! -e /var/run/pluto.pid ] ; then
-
-	[ "$ACTION" = "pressed" ] && start
-	
-else
-
-	if   [ "$ACTION" = "pressed"  ] ; then
-	
-		stop 
-		
-	elif [ "$ACTION" = "released" ] ; then
-
-		while [ -e /var/run/pluto.pid ] ; do
-			sleep 1
-		done
-
-		while ps auxww | grep ipsec | grep -v grep ; do
-			sleep 1
-		done
-
-		start
-		
-	fi
-	
-fi
-
diff --git a/package/strongswan/files/ipsec.conf b/package/strongswan/files/ipsec.conf
deleted file mode 100644
index 8f5900883..000000000
--- a/package/strongswan/files/ipsec.conf
+++ /dev/null
@@ -1,34 +0,0 @@
-
-version 2.0
-
-config setup
-        interfaces=%defaultroute
-        nat_traversal=yes		# required on both ends
-        uniqueids=yes			# makes sense on client, not server
-        hidetos=no
-
-conn %default
-        authby=rsasig
-        keyingtries=3
-        keyexchange=ike
-        left=%defaultroute
-        leftrsasigkey=%cert
-        rightrsasigkey=%cert
-        dpdtimeout=30			# keepalive must arrive within
-        dpddelay=5			# secs before keepalives start
-        compress=no			# breaks double nat installations
-        pfs=yes
-
-conn sample
-        leftca=%same
-        leftcert=my.certificate.crt
-        leftsourceip=192.168.10.1
-        leftsubnet=192.168.10.0/24
-        right=my.vpn.concentrator.net.
-        rightca=%same
-        rightid="C=??, ST=??, O=??, OU=??, CN=my.vpn.concentrator.net, E=root@concentrator.net"
-        rightsourceip=192.168.11.1
-        rightsubnet=192.168.11.0/24
-        dpdaction=hold
-        auto=start
-
diff --git a/package/strongswan/files/ipsec.config b/package/strongswan/files/ipsec.config
deleted file mode 100644
index b4865e40b..000000000
--- a/package/strongswan/files/ipsec.config
+++ /dev/null
@@ -1,21 +0,0 @@
-
-# Configure button/light behavior here.
-config device
-	option reset_button	ses
-	option status_start	ses_orange
-	option status_valid	ses_white
-
-# iptables setup for traffic to/from this host
-config filter
-	option rule_in		input_rule
-	option dest_in		ACCEPT
-	option rule_out		output_rule
-	option dest_out		ACCEPT
-
-# iptables setup for traffic to/from another host
-config forward
-	option rule_in		forwarding_rule
-	option dest_in		forwarding_vpn_in
-	option rule_out		forwarding_rule
-	option dest_out		forwarding_vpn_out
-
diff --git a/package/strongswan/files/ipsec.cron b/package/strongswan/files/ipsec.cron
deleted file mode 100644
index d8c7dccfa..000000000
--- a/package/strongswan/files/ipsec.cron
+++ /dev/null
@@ -1,2 +0,0 @@
-#!/bin/sh
-/usr/sbin/ipsec wakeup
diff --git a/package/strongswan/files/ipsec.iface b/package/strongswan/files/ipsec.iface
deleted file mode 100644
index 0716bf79b..000000000
--- a/package/strongswan/files/ipsec.iface
+++ /dev/null
@@ -1,8 +0,0 @@
-NAME=ipsec
-CTLFILE="/var/run/pluto.ctl"
-
-[ "$ACTION" = "ifup" -a "$INTERFACE" = "wan" ] || exit
-
-[ -e "$CTLFILE" ] || exit
-
-/etc/init.d/ipsec update
diff --git a/package/strongswan/files/ipsec.init b/package/strongswan/files/ipsec.init
deleted file mode 100644
index 4e8b8a216..000000000
--- a/package/strongswan/files/ipsec.init
+++ /dev/null
@@ -1,101 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=65
-
-config_cb() {
-	local cfg="$CONFIG_SECTION"
-	local cfgt
-	config_get cfgt "$cfg" TYPE
-
-	case "$cfgt" in
-		device)
-			config_get IPSEC_RESET_BUTTON		$cfg reset_button
-			config_get IPSEC_STATUS_LED_START	$cfg status_start
-			config_get IPSEC_STATUS_LED_VALID	$cfg status_valid
-			;;
-		filter)
-			config_get IPSEC_UPDOWN_RULE_IN		$cfg rule_in
-			config_get IPSEC_UPDOWN_DEST_IN		$cfg dest_in
-			config_get IPSEC_UPDOWN_RULE_OUT	$cfg rule_out
-			config_get IPSEC_UPDOWN_DEST_OUT	$cfg dest_out
-			;;
-		forward)
-			config_get IPSEC_UPDOWN_FWD_RULE_IN	$cfg rule_in
-			config_get IPSEC_UPDOWN_FWD_DEST_IN	$cfg dest_in
-			config_get IPSEC_UPDOWN_FWD_RULE_OUT	$cfg rule_out
-			config_get IPSEC_UPDOWN_FWD_DEST_OUT	$cfg dest_out
-			;;
-		*)
-			;;
-	esac
-}
-
-config_load ipsec
-
-export IPSEC_RESET_BUTTON
-export IPSEC_STATUS_LED_START
-export IPSEC_STATUS_LED_VALID
-
-export IPSEC_UPDOWN_RULE_IN
-export IPSEC_UPDOWN_DEST_IN
-export IPSEC_UPDOWN_RULE_OUT
-export IPSEC_UPDOWN_DEST_OUT
-
-export IPSEC_UPDOWN_FWD_RULE_IN
-export IPSEC_UPDOWN_FWD_DEST_IN
-export IPSEC_UPDOWN_FWD_RULE_OUT
-export IPSEC_UPDOWN_FWD_DEST_OUT
-
-
-start() {
-
-	[ -f /etc/ipsec.conf      ] || exit
-	[ -e /var/run/starter.pid ] && exit
-
-	/usr/sbin/ipsec _showstatus start
-	
-	# stuff the dnsmasq cache in case dns is on our own subnet
-	for peer in `grep left= /etc/ipsec.conf | \
-				cut -f 1 -d% | cut -f 2 -d=` ; do
-		ping -c 1 $peer > /dev/null 2>&1
-	done
-	
-	/usr/sbin/ipsec start || exit
-	
-	# work around broken routing behavior:
-	# a route to the local wan segment will appear
-	# the need was removed in the patched _updown script
-
-	while ! route -n | grep -q ipsec ; do sleep 1 ; done
-
-	defint=`route -n | awk '/^0.0.0.0/{print $8}'`
-	defnet=`route -n | grep $defint | awk  '!/^0.0.0.0/{print $1}'`
-	dnmask=`route -n | grep $defint | awk  '!/^0.0.0.0/{print $3}'`
-	tundev=`route -n | grep $defnet | awk '/ipsec/{print $8}'`
-	
-	route del -net $defnet netmask $dnmask dev $tundev
-}
-
-
-stop() {
-
-	/usr/sbin/ipsec stop 2> /dev/null
-
-	# wait until the shutdown actually happens
-	while [ -e /var/run/starter.pid ] ; do
-		if [ -d /proc/`cat /var/run/starter.pid` ] ; then
-			sleep 1
-		else
-			rm /var/run/starter.pid
-		fi
-	done
-
-	# kill any lingering processes
-	while ps auxww | grep -q ipsec | grep -v init.d; do
-		kill `ps auxww | grep -v init.d | awk '/\/ipsec\//{print $1}'` 2> /dev/null
-		sleep 1
-	done
-
- 	ipsec _showstatus stop
-}
-
diff --git a/package/strongswan/patches/100-ar-fixes.patch b/package/strongswan/patches/100-ar-fixes.patch
deleted file mode 100644
index 2e9d7800e..000000000
--- a/package/strongswan/patches/100-ar-fixes.patch
+++ /dev/null
@@ -1,81 +0,0 @@
-Index: strongswan-2.8.2/lib/libcrypto/libaes/Makefile
-===================================================================
---- strongswan-2.8.2.orig/lib/libcrypto/libaes/Makefile	2007-06-04 13:23:04.777007680 +0200
-+++ strongswan-2.8.2/lib/libcrypto/libaes/Makefile	2007-06-04 13:23:04.873992936 +0200
-@@ -25,10 +25,8 @@
- 
- $(BLIB): $(LIBOBJ)
- 	/bin/rm -f $(BLIB)
--	ar cr $(BLIB) $(LIBOBJ)
--	-if test -s /bin/ranlib; then /bin/ranlib $(BLIB); \
--	else if test -s /usr/bin/ranlib; then /usr/bin/ranlib $(BLIB); \
--	else exit 0; fi; fi
-+	$(AR) cr $(BLIB) $(LIBOBJ)
-+	$(RANLIB) $(BLIB)
- 
- testx: test_main_mac.o $(BLIB)
- 	$(CC) -o $@ $^ 
-Index: strongswan-2.8.2/lib/libcrypto/libblowfish/Makefile
-===================================================================
---- strongswan-2.8.2.orig/lib/libcrypto/libblowfish/Makefile	2007-06-04 13:23:04.783006768 +0200
-+++ strongswan-2.8.2/lib/libcrypto/libblowfish/Makefile	2007-06-04 13:23:04.873992936 +0200
-@@ -58,7 +58,7 @@
- lib:	$(LIB)
- 
- $(LIB):	$(LIBOBJ)
--	$(AR) $(LIB) $(LIBOBJ)
-+	$(AR) -r $(LIB) $(LIBOBJ)
- 	$(RANLIB) $(LIB)
- 
- # elf
-Index: strongswan-2.8.2/lib/libcrypto/libserpent/Makefile
-===================================================================
---- strongswan-2.8.2.orig/lib/libcrypto/libserpent/Makefile	2007-06-04 13:23:04.790005704 +0200
-+++ strongswan-2.8.2/lib/libcrypto/libserpent/Makefile	2007-06-04 13:23:04.873992936 +0200
-@@ -8,10 +8,8 @@
- 
- $(BLIB): $(LIBOBJ)
- 	/bin/rm -f $(BLIB)
--	ar cr $(BLIB) $(LIBOBJ)
--	-if test -s /bin/ranlib; then /bin/ranlib $(BLIB); \
--	else if test -s /usr/bin/ranlib; then /usr/bin/ranlib $(BLIB); \
--	else exit 0; fi; fi
-+	$(AR) cr $(BLIB) $(LIBOBJ)
-+	$(RANLIB) $(BLIB)
- 
- test: test_main.o $(BLIB)
- 	$(CC) -o $@ $^ 
-Index: strongswan-2.8.2/lib/libcrypto/libsha2/Makefile
-===================================================================
---- strongswan-2.8.2.orig/lib/libcrypto/libsha2/Makefile	2007-06-04 13:23:04.796004792 +0200
-+++ strongswan-2.8.2/lib/libcrypto/libsha2/Makefile	2007-06-04 13:23:04.874992784 +0200
-@@ -9,10 +9,8 @@
- 
- $(BLIB): $(LIBOBJ)
- 	/bin/rm -f $(BLIB)
--	ar cr $(BLIB) $(LIBOBJ)
--	-if test -s /bin/ranlib; then /bin/ranlib $(BLIB); \
--	else if test -s /usr/bin/ranlib; then /usr/bin/ranlib $(BLIB); \
--	else exit 0; fi; fi
-+	$(AR) cr $(BLIB) $(LIBOBJ)
-+	$(RANLIB) $(BLIB)
- 
- test: test_main.o $(BLIB)
- 	$(CC) -o $@ $^ 
-Index: strongswan-2.8.2/lib/libcrypto/libtwofish/Makefile
-===================================================================
---- strongswan-2.8.2.orig/lib/libcrypto/libtwofish/Makefile	2007-06-04 13:23:04.804003576 +0200
-+++ strongswan-2.8.2/lib/libcrypto/libtwofish/Makefile	2007-06-04 13:23:04.874992784 +0200
-@@ -9,10 +9,8 @@
- 
- $(BLIB): $(LIBOBJ)
- 	/bin/rm -f $(BLIB)
--	ar cr $(BLIB) $(LIBOBJ)
--	-if test -s /bin/ranlib; then /bin/ranlib $(BLIB); \
--	else if test -s /usr/bin/ranlib; then /usr/bin/ranlib $(BLIB); \
--	else exit 0; fi; fi
-+	$(AR) cr $(BLIB) $(LIBOBJ)
-+	$(RANLIB) $(BLIB)
- 
- test: test_main.o $(BLIB)
- 	$(CC) -o $@ $^ 
diff --git a/package/strongswan/patches/110-make-ipsec.patch b/package/strongswan/patches/110-make-ipsec.patch
deleted file mode 100644
index 0d2a4e6fb..000000000
--- a/package/strongswan/patches/110-make-ipsec.patch
+++ /dev/null
@@ -1,11 +0,0 @@
-Index: strongswan-2.8.2/programs/ipsec/Makefile
-===================================================================
---- strongswan-2.8.2.orig/programs/ipsec/Makefile	2007-06-04 13:23:04.756010872 +0200
-+++ strongswan-2.8.2/programs/ipsec/Makefile	2007-06-04 13:23:05.227939128 +0200
-@@ -24,5 +24,5 @@
- include ../Makefile.program
- 
- install:: ipsec
--	@$(INSTALL) $(INSTBINFLAGS) ipsec $(RCDIR)/ipsec
-+	@$(INSTALL) $(INSTBINFLAGS) -D ipsec $(RCDIR)/ipsec
- 
diff --git a/package/strongswan/patches/120-make-pluto.patch b/package/strongswan/patches/120-make-pluto.patch
deleted file mode 100644
index e0dd813bb..000000000
--- a/package/strongswan/patches/120-make-pluto.patch
+++ /dev/null
@@ -1,13 +0,0 @@
-Index: strongswan-2.8.2/programs/pluto/alg/Makefile
-===================================================================
---- strongswan-2.8.2.orig/programs/pluto/alg/Makefile	2007-06-04 13:23:04.734014216 +0200
-+++ strongswan-2.8.2/programs/pluto/alg/Makefile	2007-06-04 13:23:05.416910400 +0200
-@@ -20,7 +20,7 @@
- include Config.ike_alg
- 
- LIBCRYPTO:=../../../lib/libcrypto
--ALLFLAGS=$(CPPFLAGS) $(CFLAGS) -I .. -I-  -I ../../../linux/include -I $(LIBCRYPTO)
-+ALLFLAGS=$(CPPFLAGS) $(CFLAGS) -I .. -I-  -I ../../../linux/include -I $(LIBCRYPTO) $(USERCOMPILE)
- LIBALG := libalg.o
- 
- all : $(LIBALG)
diff --git a/package/strongswan/patches/130-make-starter.patch b/package/strongswan/patches/130-make-starter.patch
deleted file mode 100644
index 93888ab6b..000000000
--- a/package/strongswan/patches/130-make-starter.patch
+++ /dev/null
@@ -1,21 +0,0 @@
-Index: strongswan-2.8.2/programs/starter/Makefile
-===================================================================
---- strongswan-2.8.2.orig/programs/starter/Makefile	2007-06-04 13:23:04.711017712 +0200
-+++ strongswan-2.8.2/programs/starter/Makefile	2007-06-04 13:23:06.227787128 +0200
-@@ -16,7 +16,6 @@
- FREESWANSRCDIR?=$(shell cd ../..; pwd)
- include ${FREESWANSRCDIR}/Makefile.inc
- 
--LD=$(CC)
- RM=rm
- LEX=flex
- BISON=bison
-@@ -59,7 +58,7 @@
- all:	starter
- 
- starter:	$(OBJS) $(FREESWANLIB)
--		$(LD) $(LDFLAGS) -o starter $(OBJS) $(LIBS)
-+		$(CC) $(LDFLAGS) -o starter $(OBJS) $(LIBS)
- 
- lex.yy.c:	parser.tab.c parser.l parser.y parser.h
- 		$(LEX) parser.l
diff --git a/package/strongswan/patches/200-wakeup-showstatus.patch b/package/strongswan/patches/200-wakeup-showstatus.patch
deleted file mode 100644
index 731f83c2e..000000000
--- a/package/strongswan/patches/200-wakeup-showstatus.patch
+++ /dev/null
@@ -1,234 +0,0 @@
-Index: strongswan-2.8.2/programs/Makefile
-===================================================================
---- strongswan-2.8.2.orig/programs/Makefile	2007-06-04 13:23:04.661025312 +0200
-+++ strongswan-2.8.2/programs/Makefile	2007-06-04 13:23:06.414758704 +0200
-@@ -22,7 +22,7 @@
- SUBDIRS+=_realsetup _secretcensor _startklips _updown _updown_espmark
- SUBDIRS+=auto barf ipsec look manual ranbits secrets starter
- SUBDIRS+=rsasigkey send-pr setup showdefaults showhostkey calcgoo mailkey
--SUBDIRS+=ikeping examples openac scepclient
-+SUBDIRS+=ikeping examples openac scepclient _showstatus wakeup
- 
- ifeq ($(USE_LWRES),true)
- SUBDIRS+=lwdnsq
-Index: strongswan-2.8.2/programs/_showstatus/Makefile
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ strongswan-2.8.2/programs/_showstatus/Makefile	2007-06-04 13:23:06.414758704 +0200
-@@ -0,0 +1,22 @@
-+# Makefile for miscelaneous programs
-+# Copyright (C) 2002  Michael Richardson	<mcr@freeswan.org>
-+# 
-+# This program is free software; you can redistribute it and/or modify it
-+# under the terms of the GNU General Public License as published by the
-+# Free Software Foundation; either version 2 of the License, or (at your
-+# option) any later version.  See <http://www.fsf.org/copyleft/gpl.txt>.
-+# 
-+# This program is distributed in the hope that it will be useful, but
-+# WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
-+# or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
-+# for more details.
-+#
-+# RCSID $Id: Makefile,v 1.3 2006/04/17 06:48:49 as Exp $
-+
-+FREESWANSRCDIR=../..
-+include ${FREESWANSRCDIR}/Makefile.inc
-+
-+PROGRAM=_showstatus
-+PROGRAMDIR=${LIBDIR}
-+
-+include ../Makefile.program
-Index: strongswan-2.8.2/programs/_showstatus/_showstatus.8
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ strongswan-2.8.2/programs/_showstatus/_showstatus.8	2007-06-04 13:23:06.414758704 +0200
-@@ -0,0 +1,23 @@
-+.TH _showstatus 8 "03 Feb 2007"
-+.\"
-+.\" RCSID $Id: _showstatus.8
-+.\"
-+.SH NAME
-+ipsec _showstatus \- give state feedback via led or other method
-+.SH SYNOPSIS
-+.I _showstatus
-+is invoked by _updown to trigger led's, or other distribution
-+or platform specific behavior. Presently, the SES button is
-+supported as a status light on OpenWRT platforms. The button
-+is configurable by environment variable:
-+-B IPSEC_STATUS_LED_START
-+defaults to ses_orange, and
-+-B IPSEC_STATUS_LED_VALID
-+defaults to ses_white.
-+.SH "SEE ALSO"
-+ipsec(8), ipsec_updown(8).
-+.SH HISTORY
-+Man page written for the Linux strongSwan project <http://www.strongswan.org/>
-+by Kevin Cody Jr. Original manpage for _updown by Michael Richardson.
-+Original program written by Henry Spencer. Extended for the Linux strongSwan
-+project <http://www.strongswan.org/> by Andreas Steffen.
-Index: strongswan-2.8.2/programs/_showstatus/_showstatus.in
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ strongswan-2.8.2/programs/_showstatus/_showstatus.in	2007-06-04 13:23:06.414758704 +0200
-@@ -0,0 +1,70 @@
-+#! /bin/sh
-+#
-+# Copyright (C) 2007 Kevin Cody Jr. <kcody@vegaresearch.com>
-+# 
-+# This program is free software; you can redistribute it and/or modify it
-+# under the terms of the GNU General Public License as published by the
-+# Free Software Foundation; either version 2 of the License, or (at your
-+# option) any later version.  See <http://www.fsf.org/copyleft/gpl.txt>.
-+# 
-+# This program is distributed in the hope that it will be useful, but
-+# WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
-+# or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
-+# for more details.
-+#
-+# RCSID $Id: _showstatus.in
-+
-+
-+LED_START=$IPSEC_STATUS_LED_START
-+LED_VALID=$IPSEC_STATUS_LED_VALID
-+
-+[ -z "$LED_START" ] && LED_START="ses_orange"
-+[ -z "$LED_VALID" ] && LED_VALID="ses_white"
-+
-+
-+setled() {
-+	led=$1
-+	st=$2
-+
-+	[ -n "$led" -a -n "$st" ] || return
-+	
-+	if [ -w "/proc/diag/led/$led" ] ; then
-+		echo "$st" > "/proc/diag/led/$led"
-+	fi
-+
-+	# integrate other led control methods here
-+
-+}
-+
-+
-+case "$1" in
-+	'start')
-+		[ -n "$LED_VALID" ] && setled "$LED_START" 1
-+		[ -z "$LED_VALID" ] && setled "$LED_START" f
-+		setled "$LED_VALID" 0
-+		;;
-+	'stop')
-+		setled "$LED_START" 0
-+		setled "$LED_VALID" 0
-+		;;
-+	'valid')
-+		setled "$LED_VALID" 1
-+		;;
-+	'invalid')
-+		setled "$LED_VALID" 0
-+		;;
-+	'up')
-+		[ -n "$LED_VALID" ] && setled "$LED_START" 0
-+		[ -z "$LED_VALID" ] && setled "$LED_START" 1
-+		setled "$LED_VALID" 1
-+		;;
-+	'down')
-+		[ -n "$LED_VALID" ] && setled "$LED_START" 1
-+		[ -z "$LED_VALID" ] && setled "$LED_START" f
-+		setled "$LED_VALID" f
-+		;;
-+	*)
-+		echo "$0: unknown status $status" >&2
-+		;;
-+esac
-+
-Index: strongswan-2.8.2/programs/wakeup/Makefile
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ strongswan-2.8.2/programs/wakeup/Makefile	2007-06-04 13:23:06.415758552 +0200
-@@ -0,0 +1,22 @@
-+# Makefile for miscelaneous programs
-+# Copyright (C) 2002  Michael Richardson	<mcr@freeswan.org>
-+# 
-+# This program is free software; you can redistribute it and/or modify it
-+# under the terms of the GNU General Public License as published by the
-+# Free Software Foundation; either version 2 of the License, or (at your
-+# option) any later version.  See <http://www.fsf.org/copyleft/gpl.txt>.
-+# 
-+# This program is distributed in the hope that it will be useful, but
-+# WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
-+# or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
-+# for more details.
-+#
-+# RCSID $Id: Makefile,v 1.3 2006/04/17 06:48:49 as Exp $
-+
-+FREESWANSRCDIR=../..
-+include ${FREESWANSRCDIR}/Makefile.inc
-+
-+PROGRAM=wakeup
-+PROGRAMDIR=${LIBDIR}
-+
-+include ../Makefile.program
-Index: strongswan-2.8.2/programs/wakeup/wakeup.8
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ strongswan-2.8.2/programs/wakeup/wakeup.8	2007-06-04 13:23:06.415758552 +0200
-@@ -0,0 +1,16 @@
-+.TH wakeup 8 "03 Feb 2007"
-+.\"
-+.\" RCSID $Id: wakeup.8
-+.\"
-+.SH NAME
-+ipsec wakeup \- stalled and down connection detection
-+.SH SYNOPSIS
-+.I wakeup
-+is invoked by cron and checks ipsec status, whacking as necessary.
-+.SH "SEE ALSO"
-+ipsec(8), ipsec_whack(8).
-+.SH HISTORY
-+Man page written for the Linux strongSwan project <http://www.strongswan.org/>
-+by Kevin Cody Jr. Original manpage for _updown by Michael Richardson.
-+Original program written by Henry Spencer. Extended for the Linux strongSwan
-+project <http://www.strongswan.org/> by Andreas Steffen.
-Index: strongswan-2.8.2/programs/wakeup/wakeup.in
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ strongswan-2.8.2/programs/wakeup/wakeup.in	2007-06-04 13:23:06.415758552 +0200
-@@ -0,0 +1,38 @@
-+#! /bin/sh
-+# wakeup script
-+#
-+# Copyright (C) 2007 Kevin Cody Jr. <kcody@vegaresearch.com>
-+# 
-+# This program is free software; you can redistribute it and/or modify it
-+# under the terms of the GNU General Public License as published by the
-+# Free Software Foundation; either version 2 of the License, or (at your
-+# option) any later version.  See <http://www.fsf.org/copyleft/gpl.txt>.
-+# 
-+# This program is distributed in the hope that it will be useful, but
-+# WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
-+# or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
-+# for more details.
-+#
-+
-+# only applicable when ipsec is running
-+[ -e /var/run/pluto.pid ] || exit
-+
-+# loop through any erouted tunnels in the HOLD state
-+for f in  `ipsec status | awk '/erouted HOLD/{ print $2 }' | cut -f1 -d\: | cut -f2 -d\"` ; do
-+
-+        # only whack if no pending events at all exists
-+        ipsec status | grep STATE | grep -q $f ||
-+                ipsec whack --name $f --initiate --asynchronous
-+
-+done
-+
-+# loop through any tunnels that don't quite exist
-+for f in `ipsec status | awk '/prospective erouted/{ print $2 }' | cut -f1 -d: | grep -v \# | cut -f2 -d\"` ; do
-+
-+        ipsec status | grep STATE_QUICK | grep -q $f || {
-+                ipsec status | grep STATE_MAIN | grep -q $f && ipsec down $f
-+                ipsec up $f
-+        }
-+
-+done
-+
diff --git a/package/strongswan/patches/210-updown.patch b/package/strongswan/patches/210-updown.patch
deleted file mode 100644
index d54662531..000000000
--- a/package/strongswan/patches/210-updown.patch
+++ /dev/null
@@ -1,662 +0,0 @@
-Index: strongswan-2.8.2/programs/_updown/_updown.8
-===================================================================
---- strongswan-2.8.2.orig/programs/_updown/_updown.8	2007-06-04 13:23:04.632029720 +0200
-+++ strongswan-2.8.2/programs/_updown/_updown.8	2007-06-04 13:23:06.656721920 +0200
-@@ -8,8 +8,23 @@
- .I _updown
- is invoked by pluto when it has brought up a new connection. This script
- is used to insert the appropriate routing entries for IPsec operation.
--It can also be used to insert and delete dynamic iptables firewall rules.
--The interface to the script is documented in the pluto man page.
-+It also inserts and deletes dynamic iptables firewall rules. IMPORTANT!
-+By default, it will ACCEPT as appropriate on the INPUT, OUTPUT, FORWARD
-+tables. Most distributions will want to change that to provide more
-+flexibility in their firewall configuration.
-+The script looks for the environment variables
-+.B IPSEC_UPDOWN_RULE_IN
-+for the iptables table it should insert into,
-+.B IPSEC_UPDOWN_DEST_IN
-+for where the rule should -j jump to,
-+.B IPSEC_UPDOWN_RULE_OUT
-+.B IPSEC_UPDOWN_DEST_OUT
-+for the same on outgoing packets, and
-+.B IPSEC_UPDOWN_FWD_RULE_IN
-+.B IPSEC_UPDOWN_FWD_DEST_IN
-+.B IPSEC_UPDOWN_FWD_RULE_OUT
-+.B IPSEC_UPDOWN_FWD_DEST_OUT
-+respectively for packets being forwarded to/from the local networks.
- .SH "SEE ALSO"
- ipsec(8), ipsec_pluto(8).
- .SH HISTORY
-Index: strongswan-2.8.2/programs/_updown/_updown.in
-===================================================================
---- strongswan-2.8.2.orig/programs/_updown/_updown.in	2007-06-04 13:23:04.642028200 +0200
-+++ strongswan-2.8.2/programs/_updown/_updown.in	2007-06-04 13:23:06.657721768 +0200
-@@ -5,6 +5,7 @@
- # Copyright (C) 2003-2004 Tuomo Soini
- # Copyright (C) 2002-2004 Michael Richardson
- # Copyright (C) 2005-2006 Andreas Steffen <andreas.steffen@strongswan.org>
-+# Copyright (C) 2007 Kevin Cody Jr <kcody@vegaresearch.com>
- # 
- # This program is free software; you can redistribute it and/or modify it
- # under the terms of the GNU General Public License as published by the
-@@ -118,20 +119,61 @@
- #              restricted on the peer side.
- #
- 
--# uncomment to log VPN connections
--VPN_LOGGING=1
--#
-+# set to /bin/true to silence log messages
-+LOGGER=logger
-+
- # tag put in front of each log entry:
- TAG=vpn
--#
-+
- # syslog facility and priority used:
--FAC_PRIO=local0.notice
--#
--# to create a special vpn logging file, put the following line into
--# the syslog configuration file /etc/syslog.conf:
--#
--# local0.notice                   -/var/log/vpn
--#
-+FAC_PRIO=authpriv.info
-+
-+
-+# in the presence of KLIPS and ipsecN interfaces do not use IPSEC_POLICY 
-+if [ `echo "$PLUTO_INTERFACE" | grep "ipsec"` ] ; then
-+	IPSEC_POLICY_IN=""
-+	IPSEC_POLICY_OUT=""
-+else
-+	IPSEC_POLICY="-m policy --pol ipsec --proto esp --reqid $PLUTO_REQID"
-+	IPSEC_POLICY_IN="$IPSEC_POLICY --dir in"
-+	IPSEC_POLICY_OUT="$IPSEC_POLICY --dir out"
-+fi
-+
-+# are there port numbers?
-+if [ "$PLUTO_MY_PORT" != 0 ] ; then
-+	S_MY_PORT="--sport $PLUTO_MY_PORT"
-+	D_MY_PORT="--dport $PLUTO_MY_PORT"
-+fi
-+
-+if [ "$PLUTO_PEER_PORT" != 0 ] ; then
-+	S_PEER_PORT="--sport $PLUTO_PEER_PORT"
-+	D_PEER_PORT="--dport $PLUTO_PEER_PORT"
-+fi
-+
-+# import firewall behavior
-+IPT_RULE_IN=$IPSEC_UPDOWN_RULE_IN
-+IPT_DEST_IN=$IPSEC_UPDOWN_DEST_IN
-+IPT_RULE_OUT=$IPSEC_UPDOWN_RULE_OUT
-+IPT_DEST_OUT=$IPSEC_UPDOWN_DEST_OUT
-+
-+# import forwarding behavior
-+FWD_RULE_IN=$IPSEC_UPDOWN_FWD_RULE_IN
-+FWD_DEST_IN=$IPSEC_UPDOWN_FWD_DEST_IN
-+FWD_RULE_OUT=$IPSEC_UPDOWN_FWD_RULE_OUT
-+FWD_DEST_OUT=$IPSEC_UPDOWN_FWD_DEST_OUT
-+
-+# default firewall behavior
-+[ -z "$IPT_RULE_IN"  ] && IPT_RULE_IN=INPUT
-+[ -z "$IPT_DEST_IN"  ] && IPT_DEST_IN=ACCEPT
-+[ -z "$IPT_RULE_OUT" ] && IPT_RULE_OUT=OUTPUT
-+[ -z "$IPT_DEST_OUT" ] && IPT_DEST_OUT=ACCEPT
-+
-+# default forwarding behavior
-+[ -z "$FWD_RULE_IN"  ] && FWD_RULE_IN=FORWARD
-+[ -z "$FWD_DEST_IN"  ] && FWD_DEST_IN=ACCEPT
-+[ -z "$FWD_RULE_OUT" ] && FWD_RULE_OUT=FORWARD
-+[ -z "$FWD_DEST_OUT" ] && FWD_DEST_OUT=ACCEPT
-+
- 
- # check interface version
- case "$PLUTO_VERSION" in
-@@ -150,8 +192,6 @@
- case "$1:$*" in
- ':')			# no parameters
- 	;;
--iptables:iptables)	# due to (left/right)firewall; for default script only
--	;;
- custom:*)		# custom parameters (see above CAUTION comment)
- 	;;
- *)	echo "$0: unknown parameters \`$*'" >&2
-@@ -159,345 +199,307 @@
- 	;;
- esac
- 
-+
- # utility functions for route manipulation
- # Meddling with this stuff should not be necessary and requires great care.
-+
- uproute() {
- 	doroute add
- 	ip route flush cache
- }
-+
- downroute() {
- 	doroute delete
- 	ip route flush cache
- }
- 
-+upfirewall() {
-+	in_rule=$1
-+	in_dest=$2
-+	out_rule=$3
-+	out_dest=$4
-+
-+	[ -n "$in_rule" -a -n "$in_dest" ] &&		\
-+	iptables -I $in_rule 1				\
-+		-i $PLUTO_INTERFACE			\
-+		-p $PLUTO_MY_PROTOCOL			\
-+		-s $PLUTO_PEER_CLIENT	$S_PEER_PORT	\
-+		-d $PLUTO_MY_CLIENT	$D_MY_PORT	\
-+		$IPSEC_POLICY_IN			\
-+		-j $in_dest
-+
-+	[ -n "$out_rule" -a -n "$out_dest" ] &&		\
-+	iptables -I $out_rule 1				\
-+		-o $PLUTO_INTERFACE			\
-+		-p $PLUTO_PEER_PROTOCOL			\
-+		-s $PLUTO_MY_CLIENT	$S_MY_PORT	\
-+		-d $PLUTO_PEER_CLIENT	$D_PEER_PORT	\
-+		$IPSEC_POLICY_OUT			\
-+		-j $out_dest
-+
-+}
-+
-+downfirewall() {
-+	in_rule=$1
-+	in_dest=$2
-+	out_rule=$3
-+	out_dest=$4
-+
-+	[ -n "$in_rule" -a -n "$in_dest" ] &&		\
-+	iptables -D $in_rule				\
-+		-i $PLUTO_INTERFACE			\
-+		-p $PLUTO_MY_PROTOCOL			\
-+		-s $PLUTO_PEER_CLIENT	$S_PEER_PORT	\
-+		-d $PLUTO_MY_CLIENT	$D_MY_PORT	\
-+		$IPSEC_POLICY_IN			\
-+		-j $in_dest
-+
-+	[ -n "$out_rule" -a -n "$out_dest" ] &&		\
-+	iptables -D $out_rule				\
-+		-o $PLUTO_INTERFACE			\
-+		-p $PLUTO_PEER_PROTOCOL			\
-+		-s $PLUTO_MY_CLIENT	$S_MY_PORT	\
-+		-d $PLUTO_PEER_CLIENT	$D_PEER_PORT	\
-+		$IPSEC_POLICY_OUT			\
-+		-j $out_dest
-+
-+}
-+
- addsource() {
- 	st=0
--	if ! ip -o route get ${PLUTO_MY_SOURCEIP%/*} | grep -q ^local
--	then
-+
-+	if ! ip -o route get ${PLUTO_MY_SOURCEIP%/*} | grep -q ^local ; then
-+
- 	    it="ip addr add ${PLUTO_MY_SOURCEIP%/*}/32 dev $PLUTO_INTERFACE"
- 	    oops="`eval $it 2>&1`"
- 	    st=$?
--	    if test " $oops" = " " -a " $st" != " 0"
--	    then
-+
-+	    if [ " $oops"  = " " -a " $st" != " 0" ] ; then
- 		oops="silent error, exit status $st"
- 	    fi
--	    if test " $oops" != " " -o " $st" != " 0"
--	    then
-+
-+	    if [ " $oops" != " " -o " $st" != " 0" ] ; then
- 		echo "$0: addsource \`$it' failed ($oops)" >&2
- 	    fi
- 	fi
-+
- 	return $st
- }
- 
- doroute() {
- 	st=0
- 	parms="$PLUTO_PEER_CLIENT"
-+	parms2="dev $PLUTO_INTERFACE"
- 
--	parms2=
--	if [ -n "$PLUTO_NEXT_HOP" ]
--	then
--	   parms2="via $PLUTO_NEXT_HOP"
--	fi
--	parms2="$parms2 dev $PLUTO_INTERFACE"
--
--	if [ -z "$PLUTO_MY_SOURCEIP" ]
--	then
--	    if [ -f /etc/sysconfig/defaultsource ]
--	    then
--		. /etc/sysconfig/defaultsource
--	    fi
-+	if [ -z "$PLUTO_MY_SOURCEIP" ] ; then
- 
--	    if [ -f /etc/conf.d/defaultsource ]
--	    then
--		. /etc/conf.d/defaultsource
--	    fi
-+		[ -f /etc/sysconfig/defaultsource ] && \
-+			. /etc/sysconfig/defaultsource
-+
-+		[ -f /etc/conf.d/defaultsource ] && \
-+			. /etc/conf.d/defaultsource
-+
-+	    	[ -n "$DEFAULTSOURCE" ]	&& \
-+			PLUTO_MY_SOURCEIP=$DEFAULTSOURCE
- 
--	    if [ -n "$DEFAULTSOURCE" ]
--	    then
--		PLUTO_MY_SOURCEIP=$DEFAULTSOURCE
--	    fi
-         fi
- 
- 	parms3=
--	if test "$1" = "add" -a -n "$PLUTO_MY_SOURCEIP"
--	then
-+	if [ "$1" = "add" -a -n "$PLUTO_MY_SOURCEIP" ] ; then
- 	    addsource
- 	    parms3="$parms3 src ${PLUTO_MY_SOURCEIP%/*}"
- 	fi
- 
--	case "$PLUTO_PEER_CLIENT_NET/$PLUTO_PEER_CLIENT_MASK" in
--	"0.0.0.0/0.0.0.0")
-+	if [ "$PLUTO_PEER_CLIENT_NET/$PLUTO_PEER_CLIENT_MASK" = \
-+						"0.0.0.0/0.0.0.0" ] ; then
- 		# opportunistic encryption work around
- 		# need to provide route that eclipses default, without 
- 		# replacing it.
--		it="ip route $1 0.0.0.0/1 $parms2 $parms3 &&
--			ip route $1 128.0.0.0/1 $parms2 $parms3"
--		;;
--	*)	it="ip route $1 $parms $parms2 $parms3"
--		;;
--	esac
-+		it="ip route $1   0.0.0.0/1 $parms2 $parms3 &&
-+		    ip route $1 128.0.0.0/1 $parms2 $parms3"
-+	else
-+		it="ip route $1 $parms $parms2 $parms3"
-+	fi
-+
- 	oops="`eval $it 2>&1`"
- 	st=$?
--	if test " $oops" = " " -a " $st" != " 0"
--	then
--	    oops="silent error, exit status $st"
--	fi
--	if test " $oops" != " " -o " $st" != " 0"
--	then
--	    echo "$0: doroute \`$it' failed ($oops)" >&2
-+
-+	if [ " $oops" = " " -a " $st" != " 0" ] ; then
-+		oops="silent error, exit status $st"
- 	fi
-+
-+	if [ " $oops" != " " -o " $st" != " 0" ] ; then
-+		echo "$0: doroute \`$it' failed ($oops)" >&2
-+	fi
-+
- 	return $st
- }
-- 
--# in the presence of KLIPS and ipsecN interfaces do not use IPSEC_POLICY 
--if [ `echo "$PLUTO_INTERFACE" | grep "ipsec"` ]
--then
--	IPSEC_POLICY_IN=""
--	IPSEC_POLICY_OUT=""
--else
--	IPSEC_POLICY="-m policy --pol ipsec --proto esp --reqid $PLUTO_REQID"
--	IPSEC_POLICY_IN="$IPSEC_POLICY --dir in"
--	IPSEC_POLICY_OUT="$IPSEC_POLICY --dir out"
--fi
- 
--# are there port numbers?
--if [ "$PLUTO_MY_PORT" != 0 ]
--then
--	S_MY_PORT="--sport $PLUTO_MY_PORT"
--	D_MY_PORT="--dport $PLUTO_MY_PORT"
--fi
--if [ "$PLUTO_PEER_PORT" != 0 ]
--then
--	S_PEER_PORT="--sport $PLUTO_PEER_PORT"
--	D_PEER_PORT="--dport $PLUTO_PEER_PORT"
--fi
-+dologentry() {
-+	action=$1
-+
-+	if [ "$PLUTO_PEER_CLIENT" == "$PLUTO_PEER/32" ] ; then
-+		rem="$PLUTO_PEER"
-+	else
-+		rem="$PLUTO_PEER_CLIENT == $PLUTO_PEER"
-+	fi
-+
-+	if [ "$PLUTO_MY_CLIENT" == "$PLUTO_ME/32" ] ; then
-+		loc="$PLUTO_ME"
-+	else
-+		loc="$PLUTO_ME == $PLUTO_MY_CLIENT"
-+	fi
-+
-+	$LOGGER -t $TAG -p $FAC_PRIO "$action $rem -- $loc ($PLUTO_PEER_ID)"
-+}
-+
- 
- # the big choice
-+
- case "$PLUTO_VERB:$1" in
- prepare-host:*|prepare-client:*)
- 	# delete possibly-existing route (preliminary to adding a route)
--	case "$PLUTO_PEER_CLIENT_NET/$PLUTO_PEER_CLIENT_MASK" in
--	"0.0.0.0/0.0.0.0")
--		# need to provide route that eclipses default, without 
-+
-+	if [ "$PLUTO_PEER_CLIENT_NET/$PLUTO_PEER_CLIENT_MASK" = \
-+						"0.0.0.0/0.0.0.0" ] ; then
-+		# need to remove the route that eclipses default, without 
- 		# replacing it.
--		parms1="0.0.0.0/1"
--		parms2="128.0.0.0/1"
--		it="ip route delete $parms1 2>&1 ; ip route delete $parms2 2>&1"
--		oops="`ip route delete $parms1 2>&1 ; ip route delete $parms2 2>&1`"
--		;;
--	*)
--		parms="$PLUTO_PEER_CLIENT"
--		it="ip route delete $parms 2>&1"
--		oops="`ip route delete $parms 2>&1`"
--		;;
--	esac
--	status="$?"
--	if test " $oops" = " " -a " $status" != " 0"
--	then
--		oops="silent error, exit status $status"
-+		it="( ip route delete   0.0.0.0/1 ;
-+		      ip route delete 128.0.0.0/1 )"
-+	else
-+		it="ip route delete $PLUTO_PEER_CLIENT"
-+	fi
-+
-+	oops="`$it 2>&1`"
-+	st="$?"
-+
-+	if [ " $oops" = " " -a " $st" != " 0" ] ; then
-+		oops="silent error, exit status $st"
- 	fi
-+
- 	case "$oops" in
- 	*'RTNETLINK answers: No such process'*)	
- 		# This is what route (currently -- not documented!) gives
- 		# for "could not find such a route".
- 		oops=
--		status=0
-+		st=0
- 		;;
- 	esac
--	if test " $oops" != " " -o " $status" != " 0"
--	then
-+
-+	if [ " $oops" != " " -o " $st" != " 0" ] ; then
- 		echo "$0: \`$it' failed ($oops)" >&2
- 	fi
--	exit $status
-+
-+	exit $st
-+
- 	;;
- route-host:*|route-client:*)
- 	# connection to me or my client subnet being routed
-+
-+	ipsec _showstatus valid
- 	uproute
-+
- 	;;
- unroute-host:*|unroute-client:*)
- 	# connection to me or my client subnet being unrouted
-+
-+	ipsec _showstatus invalid
- 	downroute
-+
- 	;;
--up-host:)
-+up-host:*)
- 	# connection to me coming up
--	# If you are doing a custom version, firewall commands go here.
-+
-+	ipsec _showstatus up
-+	upfirewall $IPT_RULE_IN $IPT_DEST_IN $IPT_RULE_OUT $OUT_DEST_OUT
-+	dologentry "VPN-UP"
-+
- 	;;
--down-host:)
-+down-host:*)
- 	# connection to me going down
--	# If you are doing a custom version, firewall commands go here.
--	;;
--up-client:)
--	# connection to my client subnet coming up
--	# If you are doing a custom version, firewall commands go here.
--	;;
--down-client:)
--	# connection to my client subnet going down
--	# If you are doing a custom version, firewall commands go here.
-+
-+	ipsec _showstatus down
-+	downfirewall $IPT_RULE_IN $IPT_DEST_IN $IPT_RULE_OUT $OUT_DEST_OUT
-+	dologentry "VPN-DN"
-+
- 	;;
--up-host:iptables)
--	# connection to me, with (left/right)firewall=yes, coming up
--	# This is used only by the default updown script, not by your custom
--	# ones, so do not mess with it; see CAUTION comment up at top.
--	iptables -I INPUT 1 -i $PLUTO_INTERFACE -p $PLUTO_MY_PROTOCOL \
--	    -s $PLUTO_PEER_CLIENT_NET/$PLUTO_PEER_CLIENT_MASK $S_PEER_PORT \
--	    -d $PLUTO_ME $D_MY_PORT $IPSEC_POLICY_IN -j ACCEPT
--	iptables -I OUTPUT 1 -o $PLUTO_INTERFACE -p $PLUTO_PEER_PROTOCOL \
--	    -s $PLUTO_ME $S_MY_PORT $IPSEC_POLICY_OUT \
--	    -d $PLUTO_PEER_CLIENT_NET/$PLUTO_PEER_CLIENT_MASK $D_PEER_PORT -j ACCEPT
--	#
--	# log IPsec host connection setup
--	if [ $VPN_LOGGING ]
--	then
--	  if [ "$PLUTO_PEER_CLIENT" == "$PLUTO_PEER/32" ]
--	  then
--	    logger -t $TAG -p $FAC_PRIO \
--	      "+ `echo -e $PLUTO_PEER_ID` $PLUTO_PEER -- $PLUTO_ME"
--	  else
--	    logger -t $TAG -p $FAC_PRIO \
--	      "+ `echo -e $PLUTO_PEER_ID` $PLUTO_PEER_CLIENT == $PLUTO_PEER -- $PLUTO_ME"
--	  fi
--	fi	
--	;;
--down-host:iptables)
--	# connection to me, with (left/right)firewall=yes, going down
--	# This is used only by the default updown script, not by your custom
--	# ones, so do not mess with it; see CAUTION comment up at top.
--	iptables -D INPUT -i $PLUTO_INTERFACE -p $PLUTO_MY_PROTOCOL \
--	    -s $PLUTO_PEER_CLIENT_NET/$PLUTO_PEER_CLIENT_MASK $S_PEER_PORT \
--	    -d $PLUTO_ME $D_MY_PORT $IPSEC_POLICY_IN -j ACCEPT
--	iptables -D OUTPUT -o $PLUTO_INTERFACE -p $PLUTO_PEER_PROTOCOL \
--	    -s $PLUTO_ME $S_MY_PORT $IPSEC_POLICY_OUT \
--	    -d $PLUTO_PEER_CLIENT_NET/$PLUTO_PEER_CLIENT_MASK $D_PEER_PORT -j ACCEPT
--	#
--	# log IPsec host connection teardown
--	if [ $VPN_LOGGING ]
--	then
--	  if [ "$PLUTO_PEER_CLIENT" == "$PLUTO_PEER/32" ]
--	  then
--	    logger -t $TAG -p $FAC_PRIO -- \
--	      "- `echo -e $PLUTO_PEER_ID` $PLUTO_PEER -- $PLUTO_ME"
--	  else
--	    logger -t $TAG -p $FAC_PRIO -- \
--	    "- `echo -e $PLUTO_PEER_ID` $PLUTO_PEER_CLIENT == $PLUTO_PEER -- $PLUTO_ME"
--	  fi
--	fi
--	;;
--up-client:iptables)
--	# connection to client subnet, with (left/right)firewall=yes, coming up
--	# This is used only by the default updown script, not by your custom
--	# ones, so do not mess with it; see CAUTION comment up at top.
--	if [ "$PLUTO_PEER_CLIENT" != "$PLUTO_MY_SOURCEIP/32" ]
--	then
--	  iptables -I FORWARD 1 -o $PLUTO_INTERFACE -p $PLUTO_PEER_PROTOCOL \
--	      -s $PLUTO_MY_CLIENT_NET/$PLUTO_MY_CLIENT_MASK $S_MY_PORT \
--	      -d $PLUTO_PEER_CLIENT_NET/$PLUTO_PEER_CLIENT_MASK $D_PEER_PORT \
--	         $IPSEC_POLICY_OUT -j ACCEPT
--	  iptables -I FORWARD 1 -i $PLUTO_INTERFACE -p $PLUTO_MY_PROTOCOL \
--	      -s $PLUTO_PEER_CLIENT_NET/$PLUTO_PEER_CLIENT_MASK $S_PEER_PORT \
--	      -d $PLUTO_MY_CLIENT_NET/$PLUTO_MY_CLIENT_MASK $D_MY_PORT \
--	         $IPSEC_POLICY_IN -j ACCEPT
-+up-client:*)
-+	# connection to client subnet coming up
-+
-+	ipsec _showstatus up
-+
-+	if [ "$PLUTO_MY_CLIENT" != "$PLUTO_ME/32" -a \
-+	     "$PLUTO_MY_CLIENT" != "$PLUTO_MY_SOURCEIP/32" ] ; then
-+		upfirewall $FWD_RULE_IN $FWD_DEST_IN $FWD_RULE_OUT $FWD_DEST_OUT
- 	fi
--	#
-+
- 	# a virtual IP requires an INPUT and OUTPUT rule on the host
- 	# or sometimes host access via the internal IP is needed
--	if [ -n "$PLUTO_MY_SOURCEIP" -o -n "$PLUTO_HOST_ACCESS" ]
--	then
--	  iptables -I INPUT 1 -i $PLUTO_INTERFACE -p $PLUTO_MY_PROTOCOL \
--	      -s $PLUTO_PEER_CLIENT_NET/$PLUTO_PEER_CLIENT_MASK $S_PEER_PORT \
--	      -d $PLUTO_MY_CLIENT_NET/$PLUTO_MY_CLIENT_MASK $D_MY_PORT \
--	         $IPSEC_POLICY_IN -j ACCEPT
--	  iptables -I OUTPUT 1 -o $PLUTO_INTERFACE -p $PLUTO_PEER_PROTOCOL \
--	      -s $PLUTO_MY_CLIENT_NET/$PLUTO_MY_CLIENT_MASK $S_MY_PORT \
--	      -d $PLUTO_PEER_CLIENT_NET/$PLUTO_PEER_CLIENT_MASK $D_PEER_PORT \
--	         $IPSEC_POLICY_OUT -j ACCEPT
--	fi
--	#
--	# log IPsec client connection setup
--	if [ $VPN_LOGGING ]
--	then
--	  if [ "$PLUTO_PEER_CLIENT" == "$PLUTO_PEER/32" ]
--	  then
--	    logger -t $TAG -p $FAC_PRIO \
--	      "+ `echo -e $PLUTO_PEER_ID` $PLUTO_PEER -- $PLUTO_ME == $PLUTO_MY_CLIENT"
--	  else
--	    logger -t $TAG -p $FAC_PRIO \
--	      "+ `echo -e $PLUTO_PEER_ID` $PLUTO_PEER_CLIENT == $PLUTO_PEER -- $PLUTO_ME == $PLUTO_MY_CLIENT"
--	  fi
--	fi
--	;;
--down-client:iptables)
--	# connection to client subnet, with (left/right)firewall=yes, going down
--	# This is used only by the default updown script, not by your custom
--	# ones, so do not mess with it; see CAUTION comment up at top.
--	if [ "$PLUTO_PEER_CLIENT" != "$PLUTO_MY_SOURCEIP/32" ]
--	then
--	  iptables -D FORWARD -o $PLUTO_INTERFACE -p $PLUTO_PEER_PROTOCOL \
--	      -s $PLUTO_MY_CLIENT_NET/$PLUTO_MY_CLIENT_MASK $S_MY_PORT \
--	      -d $PLUTO_PEER_CLIENT_NET/$PLUTO_PEER_CLIENT_MASK $D_PEER_PORT \
--	         $IPSEC_POLICY_OUT -j ACCEPT
--	  iptables -D FORWARD -i $PLUTO_INTERFACE -p $PLUTO_MY_PROTOCOL \
--	      -s $PLUTO_PEER_CLIENT_NET/$PLUTO_PEER_CLIENT_MASK $S_PEER_PORT \
--	      -d $PLUTO_MY_CLIENT_NET/$PLUTO_MY_CLIENT_MASK $D_MY_PORT \
--	         $IPSEC_POLICY_IN -j ACCEPT
-+	if [ -n "$PLUTO_MY_SOURCEIP" -o -n "$PLUTO_HOST_ACCESS" ] ; then
-+		upfirewall $IPT_RULE_IN $IPT_DEST_IN $IPT_RULE_OUT $OUT_DEST_OUT
-+	fi
-+
-+	dologentry "VPN-UP"
-+
-+	;;
-+down-client:*)
-+	# connection to client subnet going down
-+
-+	ipsec _showstatus down
-+
-+	if [ "$PLUTO_MY_CLIENT" != "$PLUTO_ME/32" -a \
-+	     "$PLUTO_MY_CLIENT" != "$PLUTO_MY_SOURCEIP/32" ] ; then
-+		downfirewall $FWD_RULE_IN $FWD_DEST_IN $FWD_RULE_OUT $FWD_DEST_OUT
- 	fi
--	#
-+
- 	# a virtual IP requires an INPUT and OUTPUT rule on the host
- 	# or sometimes host access via the internal IP is needed
--	if [ -n "$PLUTO_MY_SOURCEIP" -o -n "$PLUTO_HOST_ACCESS" ]
--	then
--	  iptables -D INPUT -i $PLUTO_INTERFACE -p $PLUTO_MY_PROTOCOL \
--	      -s $PLUTO_PEER_CLIENT_NET/$PLUTO_PEER_CLIENT_MASK $S_PEER_PORT \
--	      -d $PLUTO_MY_CLIENT_NET/$PLUTO_MY_CLIENT_MASK $D_MY_PORT \
--	         $IPSEC_POLICY_IN -j ACCEPT
--	  iptables -D OUTPUT -o $PLUTO_INTERFACE -p $PLUTO_PEER_PROTOCOL \
--	      -s $PLUTO_MY_CLIENT_NET/$PLUTO_MY_CLIENT_MASK $S_MY_PORT \
--	      -d $PLUTO_PEER_CLIENT_NET/$PLUTO_PEER_CLIENT_MASK $D_PEER_PORT \
--	         $IPSEC_POLICY_OUT -j ACCEPT
--	fi
--	#
--	# log IPsec client connection teardown
--	if [ $VPN_LOGGING ]
--	then
--	  if [ "$PLUTO_PEER_CLIENT" == "$PLUTO_PEER/32" ]
--	  then
--	    logger -t $TAG -p $FAC_PRIO -- \
--	      "- `echo -e $PLUTO_PEER_ID` $PLUTO_PEER -- $PLUTO_ME == $PLUTO_MY_CLIENT"
--	  else
--	    logger -t $TAG -p $FAC_PRIO -- \
--	      "- `echo -e $PLUTO_PEER_ID` $PLUTO_PEER_CLIENT == $PLUTO_PEER -- $PLUTO_ME == $PLUTO_MY_CLIENT"
--	  fi
-+	if [ -n "$PLUTO_MY_SOURCEIP" -o -n "$PLUTO_HOST_ACCESS" ] ; then
-+		downfirewall $IPT_RULE_IN $IPT_DEST_IN $IPT_RULE_OUT $OUT_DEST_OUT
- 	fi
-+
-+	dologentry "VPN-DN"
-+
- 	;;
--#
--# IPv6
--#
- prepare-host-v6:*|prepare-client-v6:*)
-+
- 	;;
- route-host-v6:*|route-client-v6:*)
- 	# connection to me or my client subnet being routed
-+
- 	#uproute_v6
-+
- 	;;
- unroute-host-v6:*|unroute-client-v6:*)
- 	# connection to me or my client subnet being unrouted
-+
- 	#downroute_v6
-+
- 	;;
- up-host-v6:*)
- 	# connection to me coming up
- 	# If you are doing a custom version, firewall commands go here.
-+
- 	;;
- down-host-v6:*)
- 	# connection to me going down
- 	# If you are doing a custom version, firewall commands go here.
-+
- 	;;
- up-client-v6:)
- 	# connection to my client subnet coming up
- 	# If you are doing a custom version, firewall commands go here.
-+
- 	;;
- down-client-v6:)
- 	# connection to my client subnet going down
- 	# If you are doing a custom version, firewall commands go here.
-+
- 	;;
--*)	echo "$0: unknown verb \`$PLUTO_VERB' or parameter \`$1'" >&2
-+*)
-+	echo "$0: unknown verb \`$PLUTO_VERB' or parameter \`$1'" >&2
- 	exit 1
-+
- 	;;
- esac
-+
diff --git a/package/strongswan/patches/300-openwrt.patch b/package/strongswan/patches/300-openwrt.patch
deleted file mode 100644
index e249a8d61..000000000
--- a/package/strongswan/patches/300-openwrt.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-Index: strongswan-2.8.2/Makefile.inc
-===================================================================
---- strongswan-2.8.2.orig/Makefile.inc	2007-06-04 13:23:04.604033976 +0200
-+++ strongswan-2.8.2/Makefile.inc	2007-06-04 13:23:06.855691672 +0200
-@@ -123,7 +123,7 @@
- # With a non-null DESTDIR, INC_RCDEFAULT will be used unless one of the
- # INC_RCDIRS directories has been pre-created under DESTDIR.
- INC_RCDIRS=/etc/rc.d/init.d /etc/rc.d /etc/init.d /sbin/init.d
--INC_RCDEFAULT=/etc/rc.d/init.d
-+INC_RCDEFAULT=/etc/init.d
- 
- # RCDIR is where boot/shutdown scripts go; FINALRCDIR is where they think
- # will finally be (so utils/Makefile can create a symlink in BINDIR to the
-Index: strongswan-2.8.2/programs/showhostkey/showhostkey.in
-===================================================================
---- strongswan-2.8.2.orig/programs/showhostkey/showhostkey.in	2007-06-04 13:23:04.612032760 +0200
-+++ strongswan-2.8.2/programs/showhostkey/showhostkey.in	2007-06-04 13:23:06.855691672 +0200
-@@ -62,7 +62,7 @@
- 	exit 1
- fi
- 
--host="`hostname --fqdn`"
-+host="`cat /proc/sys/kernel/hostname`"
- 
- awk '	BEGIN {
- 		inkey = 0
diff --git a/package/strongswan/patches/310-make-ipsec-alg.patch b/package/strongswan/patches/310-make-ipsec-alg.patch
deleted file mode 100644
index d5fad3d3e..000000000
--- a/package/strongswan/patches/310-make-ipsec-alg.patch
+++ /dev/null
@@ -1,19 +0,0 @@
-Index: strongswan-2.8.2/linux/net/ipsec/alg/Makefile.alg_cryptoapi
-===================================================================
---- strongswan-2.8.2.orig/linux/net/ipsec/alg/Makefile.alg_cryptoapi	2007-06-04 13:23:04.583037168 +0200
-+++ strongswan-2.8.2/linux/net/ipsec/alg/Makefile.alg_cryptoapi	2007-06-04 13:23:07.053661576 +0200
-@@ -1,10 +1,10 @@
- MOD_CRYPTOAPI := ipsec_cryptoapi.o
- 
- ifneq ($(wildcard $(TOPDIR)/include/linux/crypto.h),)
--ALG_MODULES += $(MOD_CRYPTOAPI)
--obj-$(CONFIG_IPSEC_ALG_CRYPTOAPI) += $(MOD_CRYPTOAPI)
--static_init-func-$(CONFIG_IPSEC_ALG_CRYPTOAPI)+= ipsec_cryptoapi_init
--alg_obj-$(CONFIG_IPSEC_ALG_CRYPTOAPI) += ipsec_alg_cryptoapi.o
-+#ALG_MODULES += $(MOD_CRYPTOAPI)
-+#obj-$(CONFIG_IPSEC_ALG_CRYPTOAPI) += $(MOD_CRYPTOAPI)
-+#static_init-func-$(CONFIG_IPSEC_ALG_CRYPTOAPI)+= ipsec_cryptoapi_init
-+#alg_obj-$(CONFIG_IPSEC_ALG_CRYPTOAPI) += ipsec_alg_cryptoapi.o
- else
- $(warning "Linux CryptoAPI (2.4.22+ or 2.6.x) not found, not building ipsec_cryptoapi.o")
- endif
diff --git a/package/strongswan/patches/320-no-modprobe.patch b/package/strongswan/patches/320-no-modprobe.patch
deleted file mode 100644
index d8c3648ba..000000000
--- a/package/strongswan/patches/320-no-modprobe.patch
+++ /dev/null
@@ -1,108 +0,0 @@
-Index: strongswan-2.8.2/programs/starter/klips.c
-===================================================================
---- strongswan-2.8.2.orig/programs/starter/klips.c	2007-06-04 13:23:04.544043096 +0200
-+++ strongswan-2.8.2/programs/starter/klips.c	2007-06-04 13:23:07.238633456 +0200
-@@ -44,7 +44,7 @@
- 	    unsetenv("MODPATH");
- 	    unsetenv("MODULECONF");
- 	    system("depmod -a >/dev/null 2>&1");
--	    system("modprobe -qv ipsec");
-+	    system("insmod -qv ipsec");
- 	}
- 	if (stat(PROC_IPSECVERSION, &stb) == 0)
- 	{
-@@ -62,11 +62,11 @@
-     /* make sure that all available crypto algorithms are loaded */
-     if (stat(PROC_MODULES, &stb) == 0)
-     {
--	system("modprobe -qv ipsec_aes");
--	system("modprobe -qv ipsec_serpent");
--	system("modprobe -qv ipsec_twofish");
--	system("modprobe -qv ipsec_blowfish");
--	system("modprobe -qv ipsec_sha2");
-+	system("insmod -qv ipsec_aes");
-+	system("insmod -qv ipsec_serpent");
-+	system("insmod -qv ipsec_twofish");
-+	system("insmod -qv ipsec_blowfish");
-+	system("insmod -qv ipsec_sha2");
-     }
- 
-     starter_klips_clear();
-Index: strongswan-2.8.2/programs/starter/netkey.c
-===================================================================
---- strongswan-2.8.2.orig/programs/starter/netkey.c	2007-06-04 13:23:04.551042032 +0200
-+++ strongswan-2.8.2/programs/starter/netkey.c	2007-06-04 13:23:07.238633456 +0200
-@@ -36,7 +36,7 @@
- 	/* af_key module makes the netkey proc interface visible */
- 	if (stat(PROC_MODULES, &stb) == 0)
- 	{
--	    system("modprobe -qv af_key");
-+	    system("insmod -qv af_key");
- 	}
- 
- 	/* now test again */
-@@ -52,11 +52,11 @@
-     /* make sure that all required IPsec modules are loaded */
-     if (stat(PROC_MODULES, &stb) == 0)
-     {
--	system("modprobe -qv ah4");
--	system("modprobe -qv esp4");
--	system("modprobe -qv ipcomp");
--	system("modprobe -qv xfrm4_tunnel");
--	system("modprobe -qv xfrm_user");
-+	system("insmod -qv ah4");
-+	system("insmod -qv esp4");
-+	system("insmod -qv ipcomp");
-+	system("insmod -qv xfrm4_tunnel");
-+	system("insmod -qv xfrm_user");
-     }
- 
-     DBG(DBG_CONTROL,
-Index: strongswan-2.8.2/programs/_startklips/_startklips.in
-===================================================================
---- strongswan-2.8.2.orig/programs/_startklips/_startklips.in	2007-06-04 13:23:04.560040664 +0200
-+++ strongswan-2.8.2/programs/_startklips/_startklips.in	2007-06-04 13:23:07.238633456 +0200
-@@ -249,7 +249,7 @@
- 
- if test ! -f $ipsecversion && test ! -f $netkey
- then
--	modprobe -v af_key
-+	insmod -v af_key
- fi
- 
- if test -f $netkey
-@@ -257,11 +257,11 @@
- 	klips=false
- 	if test -f $modules
- 	then
--		modprobe -qv ah4
--		modprobe -qv esp4
--		modprobe -qv ipcomp
--		modprobe -qv xfrm4_tunnel
--		modprobe -qv xfrm_user
-+		insmod -qv ah4
-+		insmod -qv esp4
-+		insmod -qv ipcomp
-+		insmod -qv xfrm4_tunnel
-+		insmod -qv xfrm_user
- 	fi
- fi
- 
-@@ -272,7 +272,7 @@
-                 setmodule
-                 unset MODPATH MODULECONF        # no user overrides!
-                 depmod -a >/dev/null 2>&1
--                modprobe -v ipsec
-+                insmod -v ipsec
-         fi
-         if test ! -f $ipsecversion
-         then
-@@ -288,7 +288,7 @@
- 	do
- 		if test -f $moduleinstplace/alg/ipsec_$alg.o
- 		then
--			modprobe ipsec_$alg
-+			insmod ipsec_$alg
- 		fi
- 	done
- fi
diff --git a/package/strongswan/patches/350-make-programs.patch b/package/strongswan/patches/350-make-programs.patch
deleted file mode 100644
index aba957754..000000000
--- a/package/strongswan/patches/350-make-programs.patch
+++ /dev/null
@@ -1,21 +0,0 @@
-Index: strongswan-2.8.2/programs/Makefile
-===================================================================
---- strongswan-2.8.2.orig/programs/Makefile	2007-06-04 13:23:06.414758704 +0200
-+++ strongswan-2.8.2/programs/Makefile	2007-06-04 13:23:07.444602144 +0200
-@@ -17,12 +17,10 @@
- FREESWANSRCDIR=..
- include ${FREESWANSRCDIR}/Makefile.inc
- 
--SUBDIRS=spi eroute spigrp tncfg klipsdebug pf_key proc pluto 
--SUBDIRS+=_confread _copyright _include _keycensor _plutoload _plutorun
--SUBDIRS+=_realsetup _secretcensor _startklips _updown _updown_espmark
--SUBDIRS+=auto barf ipsec look manual ranbits secrets starter
--SUBDIRS+=rsasigkey send-pr setup showdefaults showhostkey calcgoo mailkey
--SUBDIRS+=ikeping examples openac scepclient _showstatus wakeup
-+SUBDIRS=_copyright _updown _showstatus wakeup examples
-+SUBDIRS+=barf calcgoo eroute ikeping klipsdebug look mailkey manual
-+SUBDIRS+=openac pf_key pluto proc ranbits rsasigkey scepclient secrets
-+SUBDIRS+=showdefaults showhostkey spi spigrp starter tncfg ipsec
- 
- ifeq ($(USE_LWRES),true)
- SUBDIRS+=lwdnsq