[kernel] move lots of kernel related packages to the new system/ folder

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33830 3c298f89-4303-0410-b956-a3cf2f4a3e73

4 files changed, 0 insertions, 251 deletions

diff --git a/package/rotary-gpio-custom/Makefile b/package/rotary-gpio-custom/Makefile
deleted file mode 100644
index 315ec31f4..000000000
--- a/package/rotary-gpio-custom/Makefile
+++ /dev/null
@@ -1,53 +0,0 @@
-#
-# Copyright (C) 2008-2010 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/kernel.mk
-
-PKG_NAME:=rotary-gpio-custom
-PKG_RELEASE:=1
-
-include $(INCLUDE_DIR)/package.mk
-
-define KernelPackage/rotary-gpio-custom
-  SUBMENU:=Other modules
-  TITLE:=Custom GPIO-based rotary encoder device
-  DEPENDS:=@GPIO_SUPPORT +kmod-input-gpio-encoder
-  FILES:=$(PKG_BUILD_DIR)/rotary-gpio-custom.ko
-  KCONFIG:=
-endef
-
-define KernelPackage/rotary-gpio-custom/description
- Kernel module for register a custom rotary-gpio-encoder platform device.
-endef
-
-EXTRA_KCONFIG:= \
-	CONFIG_ROTARY_GPIO_CUSTOM=m
-
-EXTRA_CFLAGS:= \
-	$(patsubst CONFIG_%, -DCONFIG_%=1, $(patsubst %=m,%,$(filter %=m,$(EXTRA_KCONFIG)))) \
-	$(patsubst CONFIG_%, -DCONFIG_%=1, $(patsubst %=y,%,$(filter %=y,$(EXTRA_KCONFIG)))) \
-
-MAKE_OPTS:= \
-	ARCH="$(LINUX_KARCH)" \
-	CROSS_COMPILE="$(TARGET_CROSS)" \
-	SUBDIRS="$(PKG_BUILD_DIR)" \
-	EXTRA_CFLAGS="$(EXTRA_CFLAGS)" \
-	$(EXTRA_KCONFIG)
-
-define Build/Prepare
-	mkdir -p $(PKG_BUILD_DIR)
-	$(CP) ./src/* $(PKG_BUILD_DIR)/
-endef
-
-define Build/Compile
-	$(MAKE) -C "$(LINUX_DIR)" \
-		$(MAKE_OPTS) \
-		modules
-endef
-
-$(eval $(call KernelPackage,rotary-gpio-custom))
diff --git a/package/rotary-gpio-custom/src/Kconfig b/package/rotary-gpio-custom/src/Kconfig
deleted file mode 100644
index b4d55d535..000000000
--- a/package/rotary-gpio-custom/src/Kconfig
+++ /dev/null
@@ -1,9 +0,0 @@
-config ROTARY_GPIO_CUSTOM
-	tristate "Custom GPIO-based rotary driver"
-	depends on GENERIC_GPIO
-	help
-	  This is a driver to register 1 to 4 custom rotary encoder using
-	  GPIO lines.
-
-	  This support is also available as a module.  If so, the module
-	  will be called rotary-gpio-custom.
diff --git a/package/rotary-gpio-custom/src/Makefile b/package/rotary-gpio-custom/src/Makefile
deleted file mode 100644
index 133672687..000000000
--- a/package/rotary-gpio-custom/src/Makefile
+++ /dev/null
@@ -1 +0,0 @@
-obj-${CONFIG_ROTARY_GPIO_CUSTOM}	+= rotary-gpio-custom.o
diff --git a/package/rotary-gpio-custom/src/rotary-gpio-custom.c b/package/rotary-gpio-custom/src/rotary-gpio-custom.c
deleted file mode 100644
index 8cd8ef12a..000000000
--- a/package/rotary-gpio-custom/src/rotary-gpio-custom.c
+++ /dev/null
@@ -1,188 +0,0 @@
-/*
- *  Custom GPIO-based rotary driver
- *
- *  Copyright (C) 2010 Claudio Mignanti <c.mignanti@gmail.com>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- *
- *  Strongly based on Custom GPIO-based I2C driver by:
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- * ---------------------------------------------------------------------------
- *
- *  The behaviour of this driver can be altered by setting some parameters
- *  from the insmod command line.
- *
- *  The following parameters are adjustable:
- *
- *	bus0	These four arguments can be arrays of
- *	bus1	1-8 unsigned integers as follows:
- *	bus2
- *	bus3	<id>,<steps>,<axis>,<gpioa>,<gpiob>,<inverted>
- *
- *
- *  If this driver is built into the kernel, you can use the following kernel
- *  command line parameters, with the same values as the corresponding module
- *  parameters listed above:
- *
- *	rotary-gpio-custom.bus0
- *	rotary-gpio-custom.bus1
- *	rotary-gpio-custom.bus2
- *	rotary-gpio-custom.bus3
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/input.h>
-#include <linux/platform_device.h>
-#include <linux/rotary_encoder.h>
-
-#define DRV_NAME	"rotary-gpio-custom"
-#define DRV_DESC	"Custom GPIO-based rotary driver"
-#define DRV_VERSION	"0.1.0"
-
-#define PFX		DRV_NAME ": "
-
-#define BUS_PARAM_REQUIRED	5
-#define BUS_PARAM_COUNT		6
-#define BUS_COUNT_MAX		4
-
-static unsigned int bus0[BUS_PARAM_COUNT] __initdata;
-static unsigned int bus1[BUS_PARAM_COUNT] __initdata;
-static unsigned int bus2[BUS_PARAM_COUNT] __initdata;
-static unsigned int bus3[BUS_PARAM_COUNT] __initdata;
-
-static unsigned int bus_nump[BUS_COUNT_MAX] __initdata;
-
-#define BUS_PARM_DESC \
-	" config -> id,steps,axis,gpioa,gpiob[,inverted]"
-
-module_param_array(bus0, uint, &bus_nump[0], 0);
-MODULE_PARM_DESC(bus0, "bus0" BUS_PARM_DESC);
-module_param_array(bus1, uint, &bus_nump[1], 0);
-MODULE_PARM_DESC(bus1, "bus1" BUS_PARM_DESC);
-module_param_array(bus2, uint, &bus_nump[2], 0);
-MODULE_PARM_DESC(bus2, "bus2" BUS_PARM_DESC);
-module_param_array(bus3, uint, &bus_nump[3], 0);
-MODULE_PARM_DESC(bus3, "bus3" BUS_PARM_DESC);
-
-static struct platform_device *devices[BUS_COUNT_MAX];
-static unsigned int nr_devices;
-
-static void rotary_gpio_custom_cleanup(void)
-{
-	int i;
-
-	for (i = 0; i < nr_devices; i++)
-		if (devices[i])
-			platform_device_put(devices[i]);
-}
-
-static int __init rotary_gpio_custom_add_one(unsigned int id, unsigned int *params)
-{
-	struct platform_device *pdev;
-	struct rotary_encoder_platform_data pdata;
-	int err;
-
-	if (!bus_nump[id])
-		return 0;
-
-	if (bus_nump[id] < BUS_PARAM_REQUIRED) {
-		printk(KERN_ERR PFX "not enough parameters for bus%d\n", id);
-		err = -EINVAL;
-		goto err;
-	}
-
-	pdev = platform_device_alloc("rotary-gpio", params[0]);
-	if (!pdev) {
-		err = -ENOMEM;
-		goto err;
-	}
-
-	pdata.steps = params[1];
-	pdata.axis = params[2];
-	pdata.relative_axis = false;
-	pdata.rollover = false;
-	pdata.gpio_a = params[3];
-	pdata.gpio_b = params[4];
-	
-	if (params[5] == 1) {
-		pdata.inverted_a = 1;
-		pdata.inverted_b = 1;
-	} else {
-		pdata.inverted_a = 0;
-		pdata.inverted_b = 0;
-	}
-
-	err = platform_device_add_data(pdev, &pdata, sizeof(pdata));
-	if (err)
-		goto err_put;
-
-	err = platform_device_add(pdev);
-	if (err)
-		goto err_put;
-
-	devices[nr_devices++] = pdev;
-	return 0;
-
-err_put:
-	platform_device_put(pdev);
-err:
-	return err;
-}
-
-static int __init rotary_gpio_custom_probe(void)
-{
-	int err;
-
-	printk(KERN_INFO DRV_DESC " version " DRV_VERSION "\n");
-
-	err = rotary_gpio_custom_add_one(0, bus0);
-	if (err) goto err;
-
-	err = rotary_gpio_custom_add_one(1, bus1);
-	if (err) goto err;
-
-	err = rotary_gpio_custom_add_one(2, bus2);
-	if (err) goto err;
-
-	err = rotary_gpio_custom_add_one(3, bus3);
-	if (err) goto err;
-
-	if (!nr_devices) {
-		printk(KERN_ERR PFX "no bus parameter(s) specified\n");
-		err = -ENODEV;
-		goto err;
-	}
-
-	return 0;
-
-err:
-	rotary_gpio_custom_cleanup();
-	return err;
-}
-
-#ifdef MODULE
-static int __init rotary_gpio_custom_init(void)
-{
-	return rotary_gpio_custom_probe();
-}
-module_init(rotary_gpio_custom_init);
-
-static void __exit rotary_gpio_custom_exit(void)
-{
-	rotary_gpio_custom_cleanup();
-}
-module_exit(rotary_gpio_custom_exit);
-#else
-subsys_initcall(rotary_gpio_custom_probe);
-#endif /* MODULE*/
-
-MODULE_LICENSE("GPL v2");
-MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org >");
-MODULE_AUTHOR("Claudio Mignanti <c.mignanti@gmail.com>");
-MODULE_DESCRIPTION(DRV_DESC);
-MODULE_VERSION(DRV_VERSION);