move a few packages to system/utils

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35375 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 0 insertions, 98 deletions

diff --git a/package/nvram/files/nvram.init b/package/nvram/files/nvram.init
deleted file mode 100755
index 467ab2819..000000000
--- a/package/nvram/files/nvram.init
+++ /dev/null
@@ -1,98 +0,0 @@
-#!/bin/sh /etc/rc.common
-# NVRAM setup
-#
-# This file handles the NVRAM quirks of various hardware.
-
-START=02
-alias debug=${DEBUG:-:}
-
-nvram_default() {
-	[ -z "$(nvram get $1)" ] && nvram set "$1=$2"
-}
-
-nvram_set() { # for the linksys fixup part
-	[ "$(nvram get "$1")" = "$2" -a "$2" != "" ] || {
-		COMMIT=1
-		/usr/sbin/nvram set "$1=$2"
-	}
-}
-
-fixup_linksys() {
-	# work around braindead CFE defaults in linksys routers
-	boardtype=$(nvram get boardtype)
-	boardnum=$(nvram get boardnum)
-	boardflags=$(($(nvram get boardflags)))
-	adm_switch="$(( ($boardflags & 0x80) >> 7 ))"
-
-	[ -n "$(nvram get vxkilled)" ] && boardtype=0 # don't mess with the ram settings on the hacked cfe
-	case "$(( $boardtype ))" in
-		"1800") #0x708
-			if [ "$adm_switch" = 0 ]; then
-				nvram_set sdram_init "$(printf 0x%04x $(( $(/usr/sbin/nvram get sdram_init) | 0x0100 )))"
-				[ "$COMMIT" = 1 ] && {
-					nvram_set clkfreq 216
-					nvram_set sdram_ncdl 0x0
-					nvram_set pa0itssit 62
-					nvram_set pa0b0 0x15eb
-					nvram_set pa0b1 0xfa82
-					nvram_set pa0b2 0xfe66
-					nvram_set pa0maxpwr 0x4e
-				}
-			fi
-		;;
-		"1127") #0x467
-			nvram_set sdram_init "$(printf 0x%04x $(( $(/usr/sbin/nvram get sdram_init) | 0x0100 )))"
-			[ "$COMMIT" = 1 ] && {
-				nvram_set sdram_ncdl 0x0
-				nvram_set pa0itssit 62
-				nvram_set pa0b0 0x168b
-				nvram_set pa0b1 0xfabf
-				nvram_set pa0b2 0xfeaf
-				nvram_set pa0maxpwr 0x4e
-			}
-		;;
-		"1071") #0x042f
-			# do sanity check first! max 0x0011 = 128mb
-			SDRAM_INIT=$(printf %d $(/usr/sbin/nvram get sdram_init))
-			[ "$SDRAM_INIT" -lt "9" -o "$SDRAM_INIT" -gt "17" ] && {
-				# set this to default: 0x09 only if value is invaild like 16MB on Asus WL-500GP
-				echo "sdram_init is invaild: $(printf 0x%04x $SDRAM_INIT), force to default!"
-				nvram_set sdram_init 0x0009
-			}
-			# on WRT54G3GV2 set flag, so checksum errors of firmware image 2 don't stop the boot process
-			noset_try_flag=$(nvram get noset_try_flag)
-			[ "$noset_try_flag" = 0 ] && {
-				echo "setting noset_try_flag to 1."
-				nvram_set noset_try_flag 1
-			}
-			[ "$COMMIT" = 1 ] && {
-				nvram_set sdram_ncdl 0x0
-			}
-	esac
-}
-
-start() {
-	# Don't do any fixups on the WGT634U
-	[ "$(cat /proc/diag/model)" = "Netgear WGT634U" ] && return
-
-	fixup_linksys
-
-	# OFDM Power Offset is set incorrectly on many boards.
-	# Setting it to 0 will increase the tx power to normal levels.
-	nvram_set opo 0x0
-
-	[ "$(nvram get il0macaddr)" = "00:90:4c:5f:00:2a" ] && {
-		# if default wifi mac, set two higher than the lan mac
-		nvram set il0macaddr=$(nvram get et0macaddr|
-		awk '{OFS=FS=":";for(x=7,y=2;--x;){$x=sprintf("%02x",(y+="0x"$x)%256);y/=256}print}')
-	}
-
-	[ "$(nvram get et0macaddr)" = "00:90:4c:c0:00:08" ] && {
-		# OvisLink WL-1600GL mac workaround
-		nvram set et0macaddr=$(hexdump -n 6 -s 130976 -e '5/1 "%02x:" "%02x" ' /dev/mtd/0)
-		nvram set il0macaddr=$(nvram get et0macaddr|
-		awk '{OFS=FS=":";for(x=7,y=2;--x;){$x=sprintf("%02x",(y+="0x"$x)%256);y/=256}print}')
-	}
-
-	[ "$COMMIT" = "1" ] && nvram commit
-}