Disable drivers that we do not package within the mac80211 package (everything except rt2x00)

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10775 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 142 insertions, 0 deletions

diff --git a/package/mac80211/patches/001-disable_drivers.patch b/package/mac80211/patches/001-disable_drivers.patch
new file mode 100644
index 000000000..53bc0a964
--- /dev/null
+++ b/package/mac80211/patches/001-disable_drivers.patch
@@ -0,0 +1,142 @@
+diff -urN compat-wireless-2008-04-07/config.mk compat-wireless-2008-04-07.new/config.mk
+--- compat-wireless-2008-04-07/config.mk	2008-03-14 16:22:22.000000000 +0100
++++ compat-wireless-2008-04-07.new/config.mk	2008-04-09 21:17:03.000000000 +0200
+@@ -28,66 +28,6 @@
+ # PCI Drivers
+ ifneq ($(CONFIG_PCI),)
+ 
+-CONFIG_ATH5K=m
+-CONFIG_ATH5K_DEBUG=n
+-CONFIG_IWLCORE=m
+-CONFIG_IWL3945=m
+-CONFIG_IWL4965=m
+-CONFIG_IWL4965_HT=y
+-CONFIG_B43=m
+-# B43 uses PCMCIA only for Compact Flash. The Cardbus cards uses PCI
+-# Example, bcm4318:
+-# http://www.multicap.biz/wireless-lan/indoor-wlan-hardware/sdc-cf10g-80211g-compact-flash-module
+-CONFIG_B43_PCMCIA=y
+-CONFIG_B43_DMA=y
+-CONFIG_B43_PIO=y
+-CONFIG_B43_DMA_AND_PIO_MODE=y
+-CONFIG_B43_PCI_AUTOSELECT=y
+-CONFIG_B43_PCICORE_AUTOSELECT=y
+-#CONFIG_B43_RFKILL=n
+-CONFIG_B43_LEDS=y
+-# CONFIG_B43_DEBUG is not set
+-
+-CONFIG_B43LEGACY=m
+-CONFIG_B43LEGACY_PCI_AUTOSELECT=y
+-CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
+-CONFIG_B43LEGACY_DMA=y
+-CONFIG_B43LEGACY_PIO=y
+-CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
+-
+-# The Intel ipws
+-CONFIG_IPW2100=m
+-CONFIG_IPW2100_MONITOR=y
+-CONFIG_IPW2200=m
+-CONFIG_IPW2200_MONITOR=y
+-CONFIG_IPW2200_RADIOTAP=y
+-CONFIG_IPW2200_PROMISCUOUS=y
+-# The above enables use a second interface prefixed 'rtap'.
+-#           Example usage:
+-#
+-# % modprobe ipw2200 rtap_iface=1
+-# % ifconfig rtap0 up
+-# % tethereal -i rtap0
+-#
+-# If you do not specify 'rtap_iface=1' as a module parameter then
+-# the rtap interface will not be created and you will need to turn
+-# it on via sysfs:
+-#
+-# % echo 1 > /sys/bus/pci/drivers/ipw2200/*/rtap_iface
+-CONFIG_IPW2200_QOS=y
+-
+-NEED_IEEE80211=y
+-
+-CONFIG_P54_PCI=m
+-
+-CONFIG_SSB_PCIHOST_POSSIBLE=y
+-CONFIG_SSB_PCIHOST=y
+-CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
+-CONFIG_SSB_DRIVER_PCICORE=y
+-
+-CONFIG_RTL8180=m
+-CONFIG_ADM8211=m
+-
+ CONFIG_RT2X00_LIB_PCI=m
+ CONFIG_RT2400PCI=m
+ CONFIG_RT2500PCI=m
+@@ -109,31 +49,6 @@
+ 
+ # USB Drivers
+ ifneq ($(CONFIG_USB),)
+-CONFIG_ZD1211RW=m
+-
+-# support for USB Wireless devices using Atmel at76c503,
+-# at76c505 or at76c505a chips.
+-CONFIG_USB_ATMEL=m
+-
+-# Stuff here things which depend on kernel versions for USB
+-ifeq ($(shell test -e $(KLIB_BUILD)/Makefile && echo yes),yes)
+-ifeq ($(shell test $(shell sed 's/^SUBLEVEL = //;t;d' < $(KLIB_BUILD)/Makefile) -gt 21 && echo yes),yes)
+-
+-# Sorry, rndis_wlan uses cancel_work_sync which is new and can't be done in compat...
+-
+-# Wireless RNDIS USB support (RTL8185 802.11g) A-Link WL54PC
+-# All of these devices are based on Broadcom 4320 chip which
+-# is only wireless RNDIS chip known to date.
+-# Note: this depends on CONFIG_USB_NET_RNDIS_HOST and CONFIG_USB_NET_CDCETHER
+-# it also requires a new RNDIS_HOST module which we add
+-CONFIG_USB_NET_RNDIS_HOST=m
+-CONFIG_USB_NET_RNDIS_WLAN=m
+-
+-endif
+-endif
+-
+-CONFIG_P54_USB=m
+-CONFIG_RTL8187=m
+ 
+ # RT2500USB does not require firmware
+ CONFIG_RT2500USB=m
+@@ -159,39 +74,6 @@
+ CONFIG_RT2X00_LIB_FIRMWARE=y
+ endif
+ 
+-# p54
+-CONFIG_P54_COMMON=m
+-
+-# Sonics Silicon Backplane
+-CONFIG_SSB_POSSIBLE=y
+-CONFIG_SSB=m
+-CONFIG_SSB_SPROM=y
+-
+-ifneq ($(CONFIG_PCMCIA),)
+-CONFIG_SSB_PCMCIAHOST=y
+-endif
+-
+-# These two are for mips
+-CONFIG_SSB_DRIVER_MIPS=n
+-CONFIG_SSB_PCICORE_HOSTMODE=n
+-# CONFIG_SSB_DEBUG is not set
+-# CONFIG_SSB_DRIVER_EXTIF=y
+-
+-ifneq ($(CONFIG_USB),)
+-CONFIG_LIBERTAS_USB=m
+-NEED_LIBERTAS=y
+-endif
+-ifneq ($(CONFIG_PCMCIA),)
+-CONFIG_LIBERTAS_CS=m
+-NEED_LIBERTAS=y
+-endif
+-ifeq ($(NEED_LIBERTAS),y)
+-CONFIG_LIBERTAS=m
+-# Libertas uses the old stack but not fully, it will soon 
+-# be cleaned.
+-NEED_IEEE80211=y
+-endif
+-
+ ifeq ($(NEED_IEEE80211),y)
+ # Old ieee80211 "stack"
+ # Note: old softmac is scheduled for removal so we