upgrade to new version of br2684ctl

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@7011 3c298f89-4303-0410-b956-a3cf2f4a3e73

6 files changed, 164 insertions, 1160 deletions

diff --git a/package/linux-atm/Makefile b/package/linux-atm/Makefile
index 3fe9dd0c9..4edd36271 100644
--- a/package/linux-atm/Makefile
+++ b/package/linux-atm/Makefile
@@ -31,16 +31,6 @@ define Package/linux-atm
 	This package contains a library for accessing the Linux ATM subsystem.
 endef
 
-define Package/br2684ctl
-  $(call Package/linux-atm/Default)
-  SECTION:=net
-  CATEGORY:=Network
-  DEPENDS:=+linux-atm
-  TITLE:=RFC2684 bridging utility
-  DESCRIPTION:=\
-	This package contains an ATM RFC2684 bridging utility.
-endef
-
 define Build/Configure
 	$(call Build/Configure/Default)
 	# prevent autoheader invocation
@@ -74,15 +64,7 @@ define Package/linux-atm/install
 	cp -f $(PKG_INSTALL_DIR)/usr/lib/libatm.so.1 $(1)/usr/lib
 endef
 
-define Package/br2684ctl/install
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(CP) $(PKG_INSTALL_DIR)/usr/sbin/br2684ctl $(1)/usr/sbin/
-	$(INSTALL_DIR) $(1)/etc/hotplug.d/net
-	$(INSTALL_DATA) ./files/br2684.hotplug $(1)/etc/hotplug.d/net/30-br2684
-endef
-
 $(eval $(call BuildPackage,linux-atm))
-$(eval $(call BuildPackage,br2684ctl))
 
 $(eval $(call RequireCommand,automake, \
 	$(PKG_NAME) requires automake. \
diff --git a/package/linux-atm/files/br2684.hotplug b/package/linux-atm/files/br2684.hotplug
deleted file mode 100644
index 242e7e515..000000000
--- a/package/linux-atm/files/br2684.hotplug
+++ /dev/null
@@ -1,19 +0,0 @@
-[ "${INTERFACE%%[0-9]*}" = "atm" ] && {
-	case "$ACTION" in
-		register)
-			[ "$pppoe_atm" = 1 ] && {
-				case "$atm_encaps" in
-					0|vc) ENCAPS=0 ;;
-					1|llc) ENCAPS=1 ;;
-					*) ENCAPS=0 ;;
-				esac
-				insmod br2684 2>&- >&-
-				br2684ctl -c0 -e${ENCAPS} -a${atm_vpi:-8}.${atm_vci:-35} &
-			}
-		;;
-		unregister)
-			killall br2684ctl 2>&- >&-
-			rmmod br2684
-		;;
-	esac
-}
diff --git a/package/linux-atm/patches/000-debian_16.patch b/package/linux-atm/patches/000-debian_16.patch
index 41dc437ca..da82cc832 100644
--- a/package/linux-atm/patches/000-debian_16.patch
+++ b/package/linux-atm/patches/000-debian_16.patch
@@ -29654,517 +29654,6 @@
  	@for file in $(DISTFILES); do \
  	  d=$(srcdir); \
  	  if test -d $$d/$$file; then \
---- linux-atm-2.4.1.orig/src/br2684/Makefile.am
-+++ linux-atm-2.4.1/src/br2684/Makefile.am
-@@ -0,0 +1,10 @@
-+sbin_PROGRAMS = br2684ctl
-+
-+LDADD = $(top_builddir)/src/lib/libatm.la
-+
-+br2684ctl_SOURCES = br2684ctl.c
-+
-+man_MANS = br2684ctl.8
-+
-+EXTRA_DIST = $(man_MANS) USAGE.br2684
-+
---- linux-atm-2.4.1.orig/src/br2684/Makefile.in
-+++ linux-atm-2.4.1/src/br2684/Makefile.in
-@@ -0,0 +1,418 @@
-+# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am
-+
-+# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
-+# This Makefile.in is free software; the Free Software Foundation
-+# gives unlimited permission to copy and/or distribute it,
-+# with or without modifications, as long as this notice is preserved.
-+
-+# This program is distributed in the hope that it will be useful,
-+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-+# PARTICULAR PURPOSE.
-+
-+
-+SHELL = @SHELL@
-+
-+srcdir = @srcdir@
-+top_srcdir = @top_srcdir@
-+VPATH = @srcdir@
-+prefix = @prefix@
-+exec_prefix = @exec_prefix@
-+
-+bindir = @bindir@
-+sbindir = @sbindir@
-+libexecdir = @libexecdir@
-+datadir = @datadir@
-+sysconfdir = @sysconfdir@
-+sharedstatedir = @sharedstatedir@
-+localstatedir = @localstatedir@
-+libdir = @libdir@
-+infodir = @infodir@
-+mandir = @mandir@
-+includedir = @includedir@
-+oldincludedir = /usr/include
-+
-+DESTDIR =
-+
-+pkgdatadir = $(datadir)/@PACKAGE@
-+pkglibdir = $(libdir)/@PACKAGE@
-+pkgincludedir = $(includedir)/@PACKAGE@
-+
-+top_builddir = ../..
-+
-+ACLOCAL = @ACLOCAL@
-+AUTOCONF = @AUTOCONF@
-+AUTOMAKE = @AUTOMAKE@
-+AUTOHEADER = @AUTOHEADER@
-+
-+INSTALL = @INSTALL@
-+INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-+INSTALL_DATA = @INSTALL_DATA@
-+INSTALL_SCRIPT = @INSTALL_SCRIPT@
-+transform = @program_transform_name@
-+
-+NORMAL_INSTALL = :
-+PRE_INSTALL = :
-+POST_INSTALL = :
-+NORMAL_UNINSTALL = :
-+PRE_UNINSTALL = :
-+POST_UNINSTALL = :
-+host_alias = @host_alias@
-+host_triplet = @host@
-+AR = @AR@
-+AS = @AS@
-+CC = /usr/src/openwrt/staging_dir_mipsel/bin/mipsel-linux-gcc
-+CXX = @CXX@
-+CXXCPP = @CXXCPP@
-+DLLTOOL = @DLLTOOL@
-+ECHO = @ECHO@
-+EGREP = @EGREP@
-+EXEEXT = @EXEEXT@
-+F77 = @F77@
-+GCJ = @GCJ@
-+GCJFLAGS = @GCJFLAGS@
-+HAVE_LIB = @HAVE_LIB@
-+LEX = @LEX@
-+LIB = @LIB@
-+LIBTOOL = @LIBTOOL@
-+LIBTOOL_DEPS = @LIBTOOL_DEPS@
-+LIBVER_AGE = @LIBVER_AGE@
-+LIBVER_CURRENT = @LIBVER_CURRENT@
-+LIBVER_REVISION = @LIBVER_REVISION@
-+LN_S = @LN_S@
-+LTLIB = @LTLIB@
-+MAKEINFO = @MAKEINFO@
-+OBJDUMP = @OBJDUMP@
-+OBJEXT = @OBJEXT@
-+PACKAGE = @PACKAGE@
-+PERL = @PERL@
-+RANLIB = @RANLIB@
-+RC = @RC@
-+STRIP = @STRIP@
-+VERSION = @VERSION@
-+YACC = @YACC@
-+
-+sbin_PROGRAMS = br2684ctl
-+
-+LDADD = $(top_builddir)/src/lib/libatm.la
-+
-+br2684ctl_SOURCES = br2684ctl.c
-+
-+man_MANS = br2684ctl.8
-+
-+EXTRA_DIST = $(man_MANS) USAGE.br2684
-+mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
-+CONFIG_HEADER = ../../config.h
-+CONFIG_CLEAN_FILES = 
-+sbin_PROGRAMS =  br2684ctl$(EXEEXT)
-+PROGRAMS =  $(sbin_PROGRAMS)
-+
-+
-+DEFS = @DEFS@ -I. -I$(srcdir) -I../..
-+CPPFLAGS = @CPPFLAGS@
-+LDFLAGS = @LDFLAGS@
-+LIBS = @LIBS@
-+br2684ctl_OBJECTS =  br2684ctl.$(OBJEXT)
-+br2684ctl_LDADD = $(LDADD)
-+br2684ctl_DEPENDENCIES =  $(top_builddir)/src/lib/libatm.la
-+br2684ctl_LDFLAGS = 
-+CFLAGS = @CFLAGS@
-+COMPILE = $(TARGET_CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-+LTCOMPILE = $(LIBTOOL) --mode=compile $(TARGET_CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-+CCLD = $(TARGET_CC)
-+LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
-+man8dir = $(mandir)/man8
-+MANS = $(man_MANS)
-+
-+NROFF = nroff
-+DIST_COMMON =  Makefile.am Makefile.in
-+
-+
-+DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-+
-+TAR = tar
-+GZIP_ENV = --best
-+DEP_FILES =  .deps/br2684ctl.P
-+SOURCES = $(br2684ctl_SOURCES)
-+OBJECTS = $(br2684ctl_OBJECTS)
-+
-+all: all-redirect
-+.SUFFIXES:
-+.SUFFIXES: .S .c .lo .o .obj .s
-+$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) 
-+	cd $(top_srcdir) && $(AUTOMAKE) --gnu src/br2684/Makefile
-+
-+Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status $(BUILT_SOURCES)
-+	cd $(top_builddir) \
-+	  && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
-+
-+
-+mostlyclean-sbinPROGRAMS:
-+
-+clean-sbinPROGRAMS:
-+	-test -z "$(sbin_PROGRAMS)" || rm -f $(sbin_PROGRAMS)
-+
-+distclean-sbinPROGRAMS:
-+
-+maintainer-clean-sbinPROGRAMS:
-+
-+install-sbinPROGRAMS: $(sbin_PROGRAMS)
-+	@$(NORMAL_INSTALL)
-+	$(mkinstalldirs) $(DESTDIR)$(sbindir)
-+	@list='$(sbin_PROGRAMS)'; for p in $$list; do \
-+	  if test -f $$p; then \
-+	    echo " $(LIBTOOL)  --mode=install $(INSTALL_PROGRAM) $$p $(DESTDIR)$(sbindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`"; \
-+	    $(LIBTOOL)  --mode=install $(INSTALL_PROGRAM) $$p $(DESTDIR)$(sbindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \
-+	  else :; fi; \
-+	done
-+
-+uninstall-sbinPROGRAMS:
-+	@$(NORMAL_UNINSTALL)
-+	list='$(sbin_PROGRAMS)'; for p in $$list; do \
-+	  rm -f $(DESTDIR)$(sbindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \
-+	done
-+
-+# FIXME: We should only use cygpath when building on Windows,
-+# and only if it is available.
-+.c.obj:
-+	$(COMPILE) -c `cygpath -w $<`
-+
-+.s.o:
-+	$(COMPILE) -c $<
-+
-+.S.o:
-+	$(COMPILE) -c $<
-+
-+mostlyclean-compile:
-+	-rm -f *.o core *.core
-+	-rm -f *.$(OBJEXT)
-+
-+clean-compile:
-+
-+distclean-compile:
-+	-rm -f *.tab.c
-+
-+maintainer-clean-compile:
-+
-+.s.lo:
-+	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-+
-+.S.lo:
-+	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-+
-+mostlyclean-libtool:
-+	-rm -f *.lo
-+
-+clean-libtool:
-+	-rm -rf .libs _libs
-+
-+distclean-libtool:
-+
-+maintainer-clean-libtool:
-+
-+br2684ctl$(EXEEXT): $(br2684ctl_OBJECTS) $(br2684ctl_DEPENDENCIES)
-+	@rm -f br2684ctl$(EXEEXT)
-+	$(LINK) $(br2684ctl_LDFLAGS) $(br2684ctl_OBJECTS) $(br2684ctl_LDADD) $(LIBS)
-+
-+install-man8:
-+	$(mkinstalldirs) $(DESTDIR)$(man8dir)
-+	@list='$(man8_MANS)'; \
-+	l2='$(man_MANS)'; for i in $$l2; do \
-+	  case "$$i" in \
-+	    *.8*) list="$$list $$i" ;; \
-+	  esac; \
-+	done; \
-+	for i in $$list; do \
-+	  if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \
-+	  else file=$$i; fi; \
-+	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
-+	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
-+	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
-+	  echo " $(INSTALL_DATA) $$file $(DESTDIR)$(man8dir)/$$inst"; \
-+	  $(INSTALL_DATA) $$file $(DESTDIR)$(man8dir)/$$inst; \
-+	done
-+
-+uninstall-man8:
-+	@list='$(man8_MANS)'; \
-+	l2='$(man_MANS)'; for i in $$l2; do \
-+	  case "$$i" in \
-+	    *.8*) list="$$list $$i" ;; \
-+	  esac; \
-+	done; \
-+	for i in $$list; do \
-+	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
-+	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
-+	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
-+	  echo " rm -f $(DESTDIR)$(man8dir)/$$inst"; \
-+	  rm -f $(DESTDIR)$(man8dir)/$$inst; \
-+	done
-+install-man: $(MANS)
-+	@$(NORMAL_INSTALL)
-+	$(MAKE) $(AM_MAKEFLAGS) install-man8
-+uninstall-man:
-+	@$(NORMAL_UNINSTALL)
-+	$(MAKE) $(AM_MAKEFLAGS) uninstall-man8
-+
-+tags: TAGS
-+
-+ID: $(HEADERS) $(SOURCES) $(LISP)
-+	list='$(SOURCES) $(HEADERS)'; \
-+	unique=`for i in $$list; do echo $$i; done | \
-+	  awk '    { files[$$0] = 1; } \
-+	       END { for (i in files) print i; }'`; \
-+	here=`pwd` && cd $(srcdir) \
-+	  && mkid -f$$here/ID $$unique $(LISP)
-+
-+TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
-+	tags=; \
-+	here=`pwd`; \
-+	list='$(SOURCES) $(HEADERS)'; \
-+	unique=`for i in $$list; do echo $$i; done | \
-+	  awk '    { files[$$0] = 1; } \
-+	       END { for (i in files) print i; }'`; \
-+	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-+	  || (cd $(srcdir) && etags -o $$here/TAGS $(ETAGS_ARGS) $$tags  $$unique $(LISP))
-+
-+mostlyclean-tags:
-+
-+clean-tags:
-+
-+distclean-tags:
-+	-rm -f TAGS ID
-+
-+maintainer-clean-tags:
-+
-+distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
-+
-+subdir = src/br2684
-+
-+distdir: $(DISTFILES)
-+	here=`cd $(top_builddir) && pwd`; \
-+	top_distdir=`cd $(top_distdir) && pwd`; \
-+	distdir=`cd $(distdir) && pwd`; \
-+	cd $(top_srcdir) \
-+	  && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu src/br2684/Makefile
-+	@for file in $(DISTFILES); do \
-+	  d=$(srcdir); \
-+	  if test -d $$d/$$file; then \
-+	    cp -pr $$d/$$file $(distdir)/$$file; \
-+	  else \
-+	    test -f $(distdir)/$$file \
-+	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-+	    || cp -p $$d/$$file $(distdir)/$$file || :; \
-+	  fi; \
-+	done
-+
-+DEPS_MAGIC := $(shell mkdir .deps > /dev/null 2>&1 || :)
-+
-+-include $(DEP_FILES)
-+
-+mostlyclean-depend:
-+
-+clean-depend:
-+
-+distclean-depend:
-+	-rm -rf .deps
-+
-+maintainer-clean-depend:
-+
-+%.o: %.c
-+	@echo '$(COMPILE) -c $<'; \
-+	$(COMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
-+	@-cp .deps/$(*F).pp .deps/$(*F).P; \
-+	tr ' ' '\012' < .deps/$(*F).pp \
-+	  | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
-+	    >> .deps/$(*F).P; \
-+	rm .deps/$(*F).pp
-+
-+%.lo: %.c
-+	@echo '$(LTCOMPILE) -c $<'; \
-+	$(LTCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
-+	@-sed -e 's/^\([^:]*\)\.o[ 	]*:/\1.lo \1.o :/' \
-+	  < .deps/$(*F).pp > .deps/$(*F).P; \
-+	tr ' ' '\012' < .deps/$(*F).pp \
-+	  | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
-+	    >> .deps/$(*F).P; \
-+	rm -f .deps/$(*F).pp
-+info-am:
-+info: info-am
-+dvi-am:
-+dvi: dvi-am
-+check-am: all-am
-+check: check-am
-+installcheck-am:
-+installcheck: installcheck-am
-+install-exec-am: install-sbinPROGRAMS
-+install-exec: install-exec-am
-+
-+install-data-am: install-man
-+install-data: install-data-am
-+
-+install-am: all-am
-+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-+install: install-am
-+uninstall-am: uninstall-sbinPROGRAMS uninstall-man
-+uninstall: uninstall-am
-+all-am: Makefile $(PROGRAMS) $(MANS)
-+all-redirect: all-am
-+install-strip:
-+	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-+installdirs:
-+	$(mkinstalldirs)  $(DESTDIR)$(sbindir) $(DESTDIR)$(mandir)/man8
-+
-+
-+mostlyclean-generic:
-+
-+clean-generic:
-+
-+distclean-generic:
-+	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-+	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
-+
-+maintainer-clean-generic:
-+mostlyclean-am:  mostlyclean-sbinPROGRAMS mostlyclean-compile \
-+		mostlyclean-libtool mostlyclean-tags mostlyclean-depend \
-+		mostlyclean-generic
-+
-+mostlyclean: mostlyclean-am
-+
-+clean-am:  clean-sbinPROGRAMS clean-compile clean-libtool clean-tags \
-+		clean-depend clean-generic mostlyclean-am
-+
-+clean: clean-am
-+
-+distclean-am:  distclean-sbinPROGRAMS distclean-compile \
-+		distclean-libtool distclean-tags distclean-depend \
-+		distclean-generic clean-am
-+	-rm -f libtool
-+
-+distclean: distclean-am
-+
-+maintainer-clean-am:  maintainer-clean-sbinPROGRAMS \
-+		maintainer-clean-compile maintainer-clean-libtool \
-+		maintainer-clean-tags maintainer-clean-depend \
-+		maintainer-clean-generic distclean-am
-+	@echo "This command is intended for maintainers to use;"
-+	@echo "it deletes files that may require special tools to rebuild."
-+
-+maintainer-clean: maintainer-clean-am
-+
-+.PHONY: mostlyclean-sbinPROGRAMS distclean-sbinPROGRAMS \
-+clean-sbinPROGRAMS maintainer-clean-sbinPROGRAMS uninstall-sbinPROGRAMS \
-+install-sbinPROGRAMS mostlyclean-compile distclean-compile \
-+clean-compile maintainer-clean-compile mostlyclean-libtool \
-+distclean-libtool clean-libtool maintainer-clean-libtool install-man8 \
-+uninstall-man8 install-man uninstall-man tags mostlyclean-tags \
-+distclean-tags clean-tags maintainer-clean-tags distdir \
-+mostlyclean-depend distclean-depend clean-depend \
-+maintainer-clean-depend info-am info dvi-am dvi check check-am \
-+installcheck-am installcheck install-exec-am install-exec \
-+install-data-am install-data install-am install uninstall-am uninstall \
-+all-redirect all-am all installdirs mostlyclean-generic \
-+distclean-generic clean-generic maintainer-clean-generic clean \
-+mostlyclean distclean maintainer-clean
-+
-+
-+# Tell versions [3.59,3.63) of GNU make to not export all variables.
-+# Otherwise a system limit (for SysV at least) may be exceeded.
-+.NOEXPORT:
---- linux-atm-2.4.1.orig/src/br2684/br2684ctl.8
-+++ linux-atm-2.4.1/src/br2684/br2684ctl.8
-@@ -0,0 +1,74 @@
-+.\"
-+.TH br2684ctl 1 "7 Jul 2003"
-+.SH NAME
-+br2684ctl \- RFC1483/2684 Bridge Daemon
-+.SH SYNOPSIS
-+.B br2684ctl
-+[
-+.BI \-b
-+] [[
-+.BI \-c\  n
-+] [
-+.BI \-e\  0|1
-+] [
-+.BI \-s\  sndbuf
-+] [
-+.BI \-a\  [itf].vpi.vci
-+]] ...
-+.SH PARAMETERS
-+.TP 15
-+.BI \-a\  [itf].vpi.vci
-+ATM PVC number, VPI and VCI.  (Required)
-+.BI \-b
-+Puts the process in the background.
-+.TP 15
-+.BI \-c\  n
-+br2684 interface number such as 0, 1, ... (Required)
-+.TP 15
-+.BI \-e\  0|1
-+Encapsulation method:  0=LLC, 1=VC mux (the default is 0 or LLC)
-+.TP 15
-+.TP 15
-+.BI \-s\  sndbuf
-+Send buffer size. Default is 8192.
-+.SH DESCRIPTION
-+br2684ctl handles RFC1483/2684 bridged PDUs.
-+This is most often used in ADSL scenarios where
-+.I usually
-+the subscribers'
-+ethernet traffic is encapsulated in ATM AAL5 (by bridging ADSL modems)
-+according to RFC2684. 
-+The subscriber-side ADSL modem can be external with an ethernet connector 
-+or an internal ADSL card in a PC.
-+RFC1483 has been obsoleted by RFC2684.
-+
-+For example it is possible to set up your Linux box to handle several
-+ATM PVC's with bridged-1483 (sometimes referred as SNAP) encapsulation.
-+The Linux network stack might provide DHCP, IP masquerading, IP firewall services or
-+bridge the Ethernet frames just like it had several ethernet interfaces.
-+In fact it can have several (logical) ethernet interfaces, where
-+ATM is just used as a carrier.
-+.SH USAGE
-+br2684ctl creates a new network interface named nas[n]
-+which is bound to an specific ATM PVC. It requires two mandatory
-+arguments:  -c, the interface number, and -a, the ATM PVC. It should be
-+noted that the order of the command arguments matter; -c should be
-+followed by -a. You can create as many interfaces as necessary
-+in one go, just make a long command line ;) 
-+
-+For example, following command will create a nas0 interface which uses
-+the ATM PVC with VPI=0 and VCI=401. You need to configure the PVC connection
-+0.401 on the ATM switch manually.
-+
-+% br2684ctl -c 0 -a 0.401
-+
-+The command will only create a new interface nas0.
-+Next step is to assign an IP address and netmask to
-+the interface nas0 using the ifconfig command. Using ifconfig, you can
-+also assign a Ethernet MAC address to the interface nas0, if necessary.
-+
-+% ifconfig nas0 192.168.2.1 netmask 255.255.255.0
-+.SH NOTES
-+This man page is based on a tutorial by by Joonbum Byun <jbyun@megaxess.com>
-+.SH SEE ALSO
-+.BR qos (7)
 --- linux-atm-2.4.1.orig/doc/Makefile.in
 +++ linux-atm-2.4.1/doc/Makefile.in
 @@ -1,4 +1,4 @@
@@ -30808,88 +30297,6 @@
 ++#endif /* __KERNEL__ */
 ++
 ++#endif
---- linux-atm-2.4.1.orig/debian/README.br2684
-+++ linux-atm-2.4.1/debian/README.br2684
-@@ -0,0 +1,79 @@
-+README.br2684
-+~~~~~~~~~~~~~
-+
-+The linux-atm CVS includes a program called br2684 which can be used
-+to configure br2684 ATM bridging. On request (#216663), the Debian
-+maintainer included br2684 in the source package.
-+
-+This was done in a way that separates the - unreleased CVS snapshot -
-+br2684 program into its own binary package so avoid shipping
-+released and unreleased software in the same binary package.
-+
-+The modified source package (2.4.1-10) was rejected by Debian
-+ftpmaster because he found the package too small to warrant its own
-+.deb.
-+
-+Hence, atm-tools-br2684 is not built any more.
-+
-+You can, however, build your own atm-tools-br2684 package from the
-+official Debian source package by following this "script".
-+
-+(0)
-+Install all build dependencies plus autoconf, libtool, automake. If
-+#219936 is still unfixed, copy /usr/bin/autoreconf to a local
-+directory and apply the following patch after changing "+@@" to "@@"
-+in the first line (this was inserted to be able to feed this readme to
-+patch to apply the patch given in (1).
-+
-+--- /usr/bin/autoreconf
-++++ autoreconf
-++@@ -183,7 +183,7 @@
-+     {
-+       $autoconf   .= ' --force';
-+       $autoheader .= ' --force';
-+-      $automake   .= ' --force-missing';
-++      $automake   .= '';
-+       $autopoint  .= ' --force';
-+       $libtoolize .= ' --force';
-+     }
-+
-+(1) Apply the following patch
-+--- configure.in.orig
-++++ configure.in
-+@@ -152,6 +152,7 @@
-+ 		m4/Makefile \
-+ 		src/Makefile \
-+ 		src/include/Makefile \
-++		src/br2684/Makefile \
-+ 		src/lib/Makefile \
-+ 		src/test/Makefile \
-+ 		src/debug/Makefile \
-+--- debian/rules.orig
-++++ debian/rules
-+@@ -11,7 +11,7 @@
-+ export PACKAGE=linux-atm
-+ 
-+ buildindeppackages=atm-dev
-+-buildarchpackages=atm-tools libatm1 libatm1-dev
-++buildarchpackages=atm-tools atm-tools-br2684 libatm1 libatm1-dev
-+ 
-+ # generate -ppackage1 -ppackage2 ... commandline for debhelper
-+ dhbuildarchpackages=$(addprefix -p,$(buildarchpackages))
-+--- src/Makefile.am.orig
-++++ src/Makefile.am
-+@@ -1,3 +1,3 @@
-+ SUBDIRS = include lib test debug qgen saal sigd maint arpd ilmid man led lane \
-+-		mpoad switch config extra
-++		mpoad switch config extra br2684
-+ 
-+
-+(2)
-+Invoke autoreconf -f -i
-+
-+(3)
-+create your own changelog entry and your own local version number
-+
-+(4)
-+Build the package as usual
-+
-+Marc Haber, 2003-11-05
 --- linux-atm-2.4.1.orig/debian/control
 +++ linux-atm-2.4.1/debian/control
 @@ -0,0 +1,57 @@
@@ -30950,11 +30357,6 @@
 + Transfer Mode) related programs.
 + .
 + Homepage: http://linux-atm.sourceforge.net/
---- linux-atm-2.4.1.orig/debian/atm-tools-br2684.dirs
-+++ linux-atm-2.4.1/debian/atm-tools-br2684.dirs
-@@ -0,0 +1,2 @@
-+usr/sbin
-+usr/share/man/man8
 --- linux-atm-2.4.1.orig/debian/rules
 +++ linux-atm-2.4.1/debian/rules
 @@ -0,0 +1,136 @@
diff --git a/package/linux-atm/patches/100-br2684.patch b/package/linux-atm/patches/100-br2684.patch
deleted file mode 100644
index dfb1de020..000000000
--- a/package/linux-atm/patches/100-br2684.patch
+++ /dev/null
@@ -1,488 +0,0 @@
-diff -ruN linux-atm-2.4.1/configure.in linux-atm-2.4.1.new/configure.in
---- linux-atm-2.4.1/configure.in	2003-04-25 04:17:05.000000000 +0200
-+++ linux-atm-2.4.1.new/configure.in	2005-07-27 15:45:49.532396543 +0200
-@@ -153,26 +153,6 @@
- 		src/Makefile \
- 		src/include/Makefile \
- 		src/lib/Makefile \
--		src/test/Makefile \
--		src/debug/Makefile \
--		src/qgen/Makefile \
--		src/saal/Makefile \
--		src/sigd/Makefile \
--		src/maint/Makefile \
--		src/arpd/Makefile \
--		src/ilmid/Makefile \
--		src/ilmid/asn1/Makefile \
--		src/man/Makefile \
--		src/led/Makefile \
--		src/lane/Makefile \
--		src/mpoad/Makefile \
--		src/switch/Makefile \
--		src/switch/debug/Makefile \
--		src/switch/tcp/Makefile \
--		src/config/Makefile \
--		src/config/init-redhat/Makefile \
--		src/extra/Makefile \
--		src/extra/linux-atm.spec \
--		src/extra/ANS/Makefile
-+		src/br2684/Makefile \
- 		)
- 
-diff -ruN linux-atm-2.4.1/src/br2684/Makefile linux-atm-2.4.1.new/src/br2684/Makefile
---- linux-atm-2.4.1/src/br2684/Makefile	1970-01-01 02:00:00.000000000 +0200
-+++ linux-atm-2.4.1.new/src/br2684/Makefile	2002-07-15 23:44:25.000000000 +0200
-@@ -0,0 +1,13 @@
-+PREFIX=${TI_FILESYSTEM}
-+
-+all: br2684ctl
-+
-+br2684ctl: br2684ctl.c
-+	gcc -latm -o br2684ctl br2684ctl.c 
-+	strip br2684ctl
-+
-+install: br2684ctl
-+	cp br2684ctl $(PREFIX)/usr/sbin/
-+
-+clean:
-+	rm -rf br2684ctl *.o
-diff -ruN linux-atm-2.4.1/src/Makefile.am linux-atm-2.4.1.new/src/Makefile.am
---- linux-atm-2.4.1/src/Makefile.am	2001-10-03 23:14:53.000000000 +0200
-+++ linux-atm-2.4.1.new/src/Makefile.am	2005-07-27 15:33:52.389309711 +0200
-@@ -1,3 +1,2 @@
--SUBDIRS = include lib test debug qgen saal sigd maint arpd ilmid man led lane \
--		mpoad switch config extra
-+SUBDIRS = include lib br2684
- 
-
-diff -Nur linux-atm-2.4.1.orig/src/include/linux/atmbr2684.h linux-atm-2.4.1/src/include/linux/atmbr2684.h
---- linux-atm-2.4.1.orig/src/include/linux/atmbr2684.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-atm-2.4.1/src/include/linux/atmbr2684.h	2005-11-13 00:06:42.000000000 +0100
-@@ -0,0 +1,117 @@
-+#ifndef _LINUX_ATMBR2684_H
-+#define _LINUX_ATMBR2684_H
-+
-+#include <linux/atm.h>
-+#include <linux/if.h>		/* For IFNAMSIZ */
-+#include <linux/if_ether.h>	/* ETH_P_* */
-+
-+/*
-+ * Type of media we're bridging (ethernet, token ring, etc)  Currently only
-+ * ethernet is supported
-+ */
-+#define BR2684_MEDIA_ETHERNET	(0)	/* 802.3 */
-+#define BR2684_MEDIA_802_4	(1)	/* 802.4 */
-+#define BR2684_MEDIA_TR		(2)	/* 802.5 - token ring */
-+#define BR2684_MEDIA_FDDI	(3)
-+#define BR2684_MEDIA_802_6	(4)	/* 802.6 */
-+
-+/*
-+ * Is there FCS inbound on this VC?  This currently isn't supported.
-+ */
-+#define BR2684_FCSIN_NO		(0)
-+#define BR2684_FCSIN_IGNORE	(1)
-+#define BR2684_FCSIN_VERIFY	(2)
-+
-+/*
-+ * Is there FCS outbound on this VC?  This currently isn't supported.
-+ */
-+#define BR2684_FCSOUT_NO	(0)
-+#define BR2684_FCSOUT_SENDZERO	(1)
-+#define BR2684_FCSOUT_GENERATE	(2)
-+
-+/*
-+ * Does this VC include LLC encapsulation?
-+ */
-+#define BR2684_ENCAPS_VC	(0)	/* VC-mux */
-+#define BR2684_ENCAPS_LLC	(1)
-+#define BR2684_ENCAPS_AUTODETECT (2)	/* Unsuported */
-+
-+/*
-+ * Is this VC bridged or routed?
-+ */
-+
-+#define	BR2684_PAYLOAD_ROUTED	(0)
-+#define	BR2684_PAYLOAD_BRIDGED	(1)
-+
-+
-+/*
-+ * This is for the ATM_NEWBACKENDIF call - these are like socket families:
-+ * the first element of the structure is the backend number and the rest
-+ * is per-backend specific
-+ */
-+struct atm_newif_br2684 {
-+	atm_backend_t backend_num;	/* ATM_BACKEND_BR2684 */
-+	int media;		/* BR2684_MEDIA_* */
-+	char ifname[IFNAMSIZ];
-+	int mtu;
-+	int payload;		/* bridged or routed */
-+};
-+
-+/*
-+ * This structure is used to specify a br2684 interface - either by a
-+ * positive integer (returned by ATM_NEWBACKENDIF) or the interfaces name
-+ */
-+#define BR2684_FIND_BYNOTHING	(0)
-+#define BR2684_FIND_BYNUM	(1)
-+#define BR2684_FIND_BYIFNAME	(2)
-+struct br2684_if_spec {
-+	int method;		/* BR2684_FIND_* */
-+	union {
-+		char ifname[IFNAMSIZ];
-+		int devnum;
-+	} spec;
-+};
-+
-+/*
-+ * This is for the ATM_SETBACKEND call - these are like socket families:
-+ * the first element of the structure is the backend number and the rest
-+ * is per-backend specific
-+ */
-+struct atm_backend_br2684 {
-+	atm_backend_t backend_num;	/* ATM_BACKEND_BR2684 */
-+	struct br2684_if_spec ifspec;
-+	int fcs_in;		/* BR2684_FCSIN_* */
-+	int fcs_out;		/* BR2684_FCSOUT_* */
-+	int fcs_auto;		/* 1: fcs_{in,out} disabled if no FCS rx'ed */
-+	int encaps;		/* BR2684_ENCAPS_* */
-+	int payload;		/* BR2684_PAYLOAD_* */
-+	int has_vpiid;		/* 1: use vpn_id - Unsupported */
-+	__u8 vpn_id[7];
-+	int send_padding;	/* unsupported */
-+	int min_size;		/* we will pad smaller packets than this */
-+};
-+
-+/*
-+ * The BR2684_SETFILT ioctl is an experimental mechanism for folks
-+ * terminating a large number of IP-only vcc's.  When netfilter allows
-+ * efficient per-if in/out filters, this support will be removed
-+ */
-+struct br2684_filter {
-+	__u32 prefix;		/* network byte order */
-+	__u32 netmask;		/* 0 = disable filter */
-+};
-+
-+struct br2684_filter_set {
-+	struct br2684_if_spec ifspec;
-+	struct br2684_filter filter;
-+};
-+
-+enum br2684_payload {
-+	p_routed = BR2684_PAYLOAD_ROUTED,
-+	p_bridged = BR2684_PAYLOAD_BRIDGED,
-+};
-+
-+#define BR2684_SETFILT	_IOW( 'a', ATMIOC_BACKEND + 0, \
-+				struct br2684_filter_set)
-+
-+#endif				/* _LINUX_ATMBR2684_H */
---- linux-atm-2.4.1/src/br2684/br2684ctl.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-atm-2.4.1.new/src/br2684/br2684ctl.c	2006-02-07 14:19:42.000000000 +0100
-@@ -0,0 +1,307 @@
-+#include <stdio.h>
-+#include <stdlib.h>
-+#include <unistd.h>
-+#include <errno.h>
-+#include <sys/ioctl.h>
-+#include <string.h>
-+#include <syslog.h>
-+#include <atm.h>
-+#include <linux/atmdev.h>
-+#include <linux/atmbr2684.h>
-+
-+/* Written by Marcell GAL <cell@sch.bme.hu> to make use of the */
-+/* ioctls defined in the br2684... kernel patch */
-+/* Compile with cc -o br2684ctl br2684ctl.c -latm */
-+
-+/*
-+  Modified feb 2001 by Stephen Aaskov (saa@lasat.com)
-+  - Added daemonization code
-+  - Added syslog
-+  
-+  TODO: Delete interfaces after exit?
-+*/
-+
-+
-+#define LOG_NAME "RFC1483/2684 bridge"
-+#define LOG_OPTION     LOG_PERROR
-+#define LOG_FACILITY   LOG_LOCAL0
-+
-+
-+int lastsock, lastitf;
-+
-+void fatal(char *str, int i)
-+{
-+	syslog(LOG_ERR, "Fatal: %s", str);
-+	exit(-2);
-+};
-+
-+
-+void exitFunc(void)
-+{
-+	syslog(LOG_PID, "Daemon terminated\n");
-+}
-+
-+
-+int create_pidfile(char *nstr)
-+{
-+	FILE *pidfile = NULL;
-+	char name[20];
-+	int num;
-+
-+	if (nstr == NULL)
-+		return -1;
-+	num = atoi(nstr);
-+	if (num < 0)
-+		return -1;
-+
-+	snprintf(name, 20, "/var/run/nas%d.pid", num);
-+	pidfile = fopen(name, "w");
-+	if (pidfile == NULL)
-+		return -1;
-+	fprintf(pidfile, "%d", getpid());
-+	fclose(pidfile);
-+
-+	return 0;
-+}
-+
-+int create_br(char *nstr, int payload)
-+{
-+	int num, err;
-+
-+	if (lastsock < 0) {
-+		lastsock = socket(PF_ATMPVC, SOCK_DGRAM, ATM_AAL5);
-+	}
-+	if (lastsock < 0) {
-+		syslog(LOG_ERR, "socket creation failed: %s",
-+		       strerror(errno));
-+	} else {
-+		/* create the device with ioctl: */
-+		num = atoi(nstr);
-+		if (num >= 0 && num < 1234567890) {
-+			struct atm_newif_br2684 ni;
-+			ni.backend_num = ATM_BACKEND_BR2684;
-+			ni.media = BR2684_MEDIA_ETHERNET;
-+			ni.mtu = 1500;
-+			ni.payload = payload;	/* bridged or routed */
-+			sprintf(ni.ifname, "nas%d", num);
-+			err = ioctl(lastsock, ATM_NEWBACKENDIF, &ni);
-+
-+			if (err == 0)
-+				syslog(LOG_INFO,
-+				       "Interface \"%s\" (mtu=%d, payload=%s) created sucessfully\n",
-+				       ni.ifname, ni.mtu,ni.payload ? "bridged" : "routed");
-+			else
-+				syslog(LOG_INFO,
-+				       "Interface \"%s\" could not be created, reason: %s\n",
-+				       ni.ifname, strerror(errno));
-+			lastitf = num;	/* even if we didn't create, because existed, assign_vcc wil want to know it! */
-+		} else {
-+			syslog(LOG_ERR, "err: strange interface number %d",
-+			       num);
-+		}
-+	}
-+	return 0;
-+}
-+
-+
-+int assign_vcc(char *astr, int encap, int payload, int bufsize)
-+{
-+	int err, errno;
-+	struct atm_qos qos;
-+	struct sockaddr_atmpvc addr;
-+	int fd;
-+	struct atm_backend_br2684 be;
-+
-+	memset(&addr, 0, sizeof(addr));
-+	err =
-+	    text2atm(astr, (struct sockaddr *) (&addr), sizeof(addr),
-+		     T2A_PVC);
-+	if (err != 0)
-+		syslog(LOG_ERR,
-+		       "Could not parse ATM parameters (error=%d)\n", err);
-+
-+#if 0
-+	addr.sap_family = AF_ATMPVC;
-+	addr.sap_addr.itf = itf;
-+	addr.sap_addr.vpi = 0;
-+	addr.sap_addr.vci = vci;
-+#endif
-+	syslog(LOG_INFO,
-+	       "Communicating over ATM %d.%d.%d, encapsulation: %s\n",
-+	       addr.sap_addr.itf, addr.sap_addr.vpi, addr.sap_addr.vci,
-+	       encap ? "VC mux" : "LLC");
-+
-+	if ((fd = socket(PF_ATMPVC, SOCK_DGRAM, ATM_AAL5)) < 0)
-+		syslog(LOG_ERR, "failed to create socket %d, reason: %s",
-+		       errno, strerror(errno));
-+
-+
-+	memset(&qos, 0, sizeof(qos));
-+	qos.aal = ATM_AAL5;
-+	qos.txtp.traffic_class = ATM_UBR;
-+	qos.txtp.max_sdu = 1524;
-+	qos.txtp.pcr = ATM_MAX_PCR;
-+	qos.rxtp = qos.txtp;
-+
-+	if ((err =
-+	     setsockopt(fd, SOL_SOCKET, SO_SNDBUF, &bufsize,
-+			sizeof(bufsize))))
-+		syslog(LOG_ERR, "setsockopt SO_SNDBUF: (%d) %s\n", err,
-+		       strerror(err));
-+
-+	if (setsockopt(fd, SOL_ATM, SO_ATMQOS, &qos, sizeof(qos)) < 0)
-+		syslog(LOG_ERR, "setsockopt SO_ATMQOS %d", errno);
-+
-+	err =
-+	    connect(fd, (struct sockaddr *) &addr,
-+		    sizeof(struct sockaddr_atmpvc));
-+
-+	if (err < 0)
-+		fatal("failed to connect on socket", err);
-+
-+	/* attach the vcc to device: */
-+
-+	be.backend_num = ATM_BACKEND_BR2684;
-+	be.ifspec.method = BR2684_FIND_BYIFNAME;
-+	sprintf(be.ifspec.spec.ifname, "nas%d", lastitf);
-+	be.fcs_in = BR2684_FCSIN_NO;
-+	be.fcs_out = BR2684_FCSOUT_NO;
-+	be.fcs_auto = 0;
-+	be.encaps = encap ? BR2684_ENCAPS_VC : BR2684_ENCAPS_LLC;
-+	be.payload = payload;
-+	be.has_vpiid = 0;
-+	be.send_padding = 0;
-+	be.min_size = 0;
-+	err = ioctl(fd, ATM_SETBACKEND, &be);
-+	if (err == 0)
-+		syslog(LOG_INFO, "Interface configured");
-+	else {
-+		syslog(LOG_ERR, "Could not configure interface:%s",
-+		       strerror(errno));
-+		exit(2);
-+	}
-+	return fd;
-+}
-+
-+
-+
-+void usage(char *s)
-+{
-+	printf("usage: %s [-b] [[-c number] [-e 0|1] [-p 0|1] [-s num] [-a [itf.]vpi.vci]*]*\n"
-+			" -b               = run in background (daemonize)\n"
-+			" -c <num>         = use interface nas<num>\n"
-+			" -e 0|1           = encapsulation (0=LLC, 1=VC Mux)\n"
-+			" -p 0|1           = payload type (0=routed,1=bridged)\n"
-+			" -s <num>         = set sndbuf (send buffer) size (default 8192)\n"
-+			" -a [itf.]vpi.vci = ATM interface no, VPI, VCI\n",
-+	     s);
-+	exit(1);
-+}
-+
-+
-+
-+int main(int argc, char **argv)
-+{
-+	int c, background = 0, encap = 0, sndbuf = 8192, payload = 1;
-+	char *itfnum = NULL;
-+
-+	lastsock = -1;
-+	lastitf = 0;
-+
-+	openlog(LOG_NAME, LOG_OPTION, LOG_FACILITY);
-+	if (argc > 1)
-+		while ((c = getopt(argc, argv, "a:bc:e:s:p:t:?h")) != EOF)
-+			switch (c) {
-+			case 'a':
-+				assign_vcc(optarg, encap, payload, sndbuf);
-+				break;
-+			case 'b':
-+				background = 1;
-+				break;
-+			case 'c':
-+				create_br(optarg, payload);
-+				itfnum = strdup(optarg);
-+				break;
-+			case 'e':
-+				encap = (atoi(optarg));
-+				if (encap < 0) {
-+					syslog(LOG_ERR,
-+					       "invalid encapsulation: %s:\n",
-+					       optarg);
-+					encap = 0;
-+				}
-+				break;
-+			case 's':
-+				sndbuf = (atoi(optarg));
-+				if (sndbuf < 0) {
-+					syslog(LOG_ERR,
-+					       "Invalid sndbuf: %s, using size of 8192 instead\n",
-+					       optarg);
-+					sndbuf = 8192;
-+				}
-+				break;
-+			case 'p':	/* payload type: routed (0) or bridged (1) */
-+				payload = atoi(optarg);
-+				break;
-+			case '?':
-+			case 'h':
-+			default:
-+				usage(argv[0]);
-+	} else
-+		usage(argv[0]);
-+
-+	if (argc != optind)
-+		usage(argv[0]);
-+
-+	if (lastsock >= 0)
-+		close(lastsock);
-+
-+	if (background) {
-+		pid_t pid;
-+
-+		pid = fork();
-+		if (pid < 0) {
-+			fprintf(stderr, "Error detaching\n");
-+			exit(2);
-+		} else if (pid)
-+			exit(0);	// This is the parent
-+
-+		// Become a process group and session group leader
-+		if (setsid() < 0) {
-+			fprintf(stderr, "Could not set process group\n");
-+			exit(2);
-+		}
-+		// Fork again to let process group leader exit
-+		pid = fork();
-+		if (pid < 0) {
-+			fprintf(stderr,
-+				"Error detaching during second fork\n");
-+			exit(2);
-+		} else if (pid)
-+			exit(0);	// This is the parent
-+
-+		// Now we're ready for buisness
-+		chdir("/");	// Don't keep directories in use
-+		close(0);
-+		close(1);
-+		close(2);	// Close stdin, -out and -error
-+		/*
-+		   Note that this implementation does not keep an open 
-+		   stdout/err.
-+		   If we need them they can be opened now
-+		 */
-+
-+	}
-+
-+	if (itfnum != NULL) {
-+		create_pidfile(itfnum);
-+		free(itfnum);
-+	}
-+
-+	syslog(LOG_INFO, "RFC 1483/2684 bridge daemon started\n");
-+	atexit(exitFunc);
-+
-+	while (1)
-+		sleep(30);	/* to keep the sockets... */
-+	return 0;
-+}
diff --git a/package/linux-atm/patches/100-subdirs.patch b/package/linux-atm/patches/100-subdirs.patch
new file mode 100644
index 000000000..073f68bd3
--- /dev/null
+++ b/package/linux-atm/patches/100-subdirs.patch
@@ -0,0 +1,161 @@
+diff -ruN linux-atm-2.4.1/configure.in linux-atm-2.4.1.new/configure.in
+--- linux-atm-2.4.1/configure.in	2003-04-25 04:17:05.000000000 +0200
++++ linux-atm-2.4.1.new/configure.in	2005-07-27 15:45:49.532396543 +0200
+@@ -153,26 +153,5 @@
+ 		src/Makefile \
+ 		src/include/Makefile \
+ 		src/lib/Makefile \
+-		src/test/Makefile \
+-		src/debug/Makefile \
+-		src/qgen/Makefile \
+-		src/saal/Makefile \
+-		src/sigd/Makefile \
+-		src/maint/Makefile \
+-		src/arpd/Makefile \
+-		src/ilmid/Makefile \
+-		src/ilmid/asn1/Makefile \
+-		src/man/Makefile \
+-		src/led/Makefile \
+-		src/lane/Makefile \
+-		src/mpoad/Makefile \
+-		src/switch/Makefile \
+-		src/switch/debug/Makefile \
+-		src/switch/tcp/Makefile \
+-		src/config/Makefile \
+-		src/config/init-redhat/Makefile \
+-		src/extra/Makefile \
+-		src/extra/linux-atm.spec \
+-		src/extra/ANS/Makefile
+ 		)
+ 
+diff -ruN linux-atm-2.4.1/src/Makefile.am linux-atm-2.4.1.new/src/Makefile.am
+--- linux-atm-2.4.1/src/Makefile.am	2001-10-03 23:14:53.000000000 +0200
++++ linux-atm-2.4.1.new/src/Makefile.am	2005-07-27 15:33:52.389309711 +0200
+@@ -1,3 +1,2 @@
+-SUBDIRS = include lib test debug qgen saal sigd maint arpd ilmid man led lane \
+-		mpoad switch config extra
++SUBDIRS = include lib
+ 
+
+diff -Nur linux-atm-2.4.1.orig/src/include/linux/atmbr2684.h linux-atm-2.4.1/src/include/linux/atmbr2684.h
+--- linux-atm-2.4.1.orig/src/include/linux/atmbr2684.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-atm-2.4.1/src/include/linux/atmbr2684.h	2005-11-13 00:06:42.000000000 +0100
+@@ -0,0 +1,117 @@
++#ifndef _LINUX_ATMBR2684_H
++#define _LINUX_ATMBR2684_H
++
++#include <linux/atm.h>
++#include <linux/if.h>		/* For IFNAMSIZ */
++#include <linux/if_ether.h>	/* ETH_P_* */
++
++/*
++ * Type of media we're bridging (ethernet, token ring, etc)  Currently only
++ * ethernet is supported
++ */
++#define BR2684_MEDIA_ETHERNET	(0)	/* 802.3 */
++#define BR2684_MEDIA_802_4	(1)	/* 802.4 */
++#define BR2684_MEDIA_TR		(2)	/* 802.5 - token ring */
++#define BR2684_MEDIA_FDDI	(3)
++#define BR2684_MEDIA_802_6	(4)	/* 802.6 */
++
++/*
++ * Is there FCS inbound on this VC?  This currently isn't supported.
++ */
++#define BR2684_FCSIN_NO		(0)
++#define BR2684_FCSIN_IGNORE	(1)
++#define BR2684_FCSIN_VERIFY	(2)
++
++/*
++ * Is there FCS outbound on this VC?  This currently isn't supported.
++ */
++#define BR2684_FCSOUT_NO	(0)
++#define BR2684_FCSOUT_SENDZERO	(1)
++#define BR2684_FCSOUT_GENERATE	(2)
++
++/*
++ * Does this VC include LLC encapsulation?
++ */
++#define BR2684_ENCAPS_VC	(0)	/* VC-mux */
++#define BR2684_ENCAPS_LLC	(1)
++#define BR2684_ENCAPS_AUTODETECT (2)	/* Unsuported */
++
++/*
++ * Is this VC bridged or routed?
++ */
++
++#define	BR2684_PAYLOAD_ROUTED	(0)
++#define	BR2684_PAYLOAD_BRIDGED	(1)
++
++
++/*
++ * This is for the ATM_NEWBACKENDIF call - these are like socket families:
++ * the first element of the structure is the backend number and the rest
++ * is per-backend specific
++ */
++struct atm_newif_br2684 {
++	atm_backend_t backend_num;	/* ATM_BACKEND_BR2684 */
++	int media;		/* BR2684_MEDIA_* */
++	char ifname[IFNAMSIZ];
++	int mtu;
++	int payload;		/* bridged or routed */
++};
++
++/*
++ * This structure is used to specify a br2684 interface - either by a
++ * positive integer (returned by ATM_NEWBACKENDIF) or the interfaces name
++ */
++#define BR2684_FIND_BYNOTHING	(0)
++#define BR2684_FIND_BYNUM	(1)
++#define BR2684_FIND_BYIFNAME	(2)
++struct br2684_if_spec {
++	int method;		/* BR2684_FIND_* */
++	union {
++		char ifname[IFNAMSIZ];
++		int devnum;
++	} spec;
++};
++
++/*
++ * This is for the ATM_SETBACKEND call - these are like socket families:
++ * the first element of the structure is the backend number and the rest
++ * is per-backend specific
++ */
++struct atm_backend_br2684 {
++	atm_backend_t backend_num;	/* ATM_BACKEND_BR2684 */
++	struct br2684_if_spec ifspec;
++	int fcs_in;		/* BR2684_FCSIN_* */
++	int fcs_out;		/* BR2684_FCSOUT_* */
++	int fcs_auto;		/* 1: fcs_{in,out} disabled if no FCS rx'ed */
++	int encaps;		/* BR2684_ENCAPS_* */
++	int payload;		/* BR2684_PAYLOAD_* */
++	int has_vpiid;		/* 1: use vpn_id - Unsupported */
++	__u8 vpn_id[7];
++	int send_padding;	/* unsupported */
++	int min_size;		/* we will pad smaller packets than this */
++};
++
++/*
++ * The BR2684_SETFILT ioctl is an experimental mechanism for folks
++ * terminating a large number of IP-only vcc's.  When netfilter allows
++ * efficient per-if in/out filters, this support will be removed
++ */
++struct br2684_filter {
++	__u32 prefix;		/* network byte order */
++	__u32 netmask;		/* 0 = disable filter */
++};
++
++struct br2684_filter_set {
++	struct br2684_if_spec ifspec;
++	struct br2684_filter filter;
++};
++
++enum br2684_payload {
++	p_routed = BR2684_PAYLOAD_ROUTED,
++	p_bridged = BR2684_PAYLOAD_BRIDGED,
++};
++
++#define BR2684_SETFILT	_IOW( 'a', ATMIOC_BACKEND + 0, \
++				struct br2684_filter_set)
++
++#endif				/* _LINUX_ATMBR2684_H */
+
diff --git a/package/linux-atm/patches/300-no_autotools.patch b/package/linux-atm/patches/300-no_autotools.patch
index 73427296c..1b9be11ec 100644
--- a/package/linux-atm/patches/300-no_autotools.patch
+++ b/package/linux-atm/patches/300-no_autotools.patch
@@ -11160,7 +11160,7 @@ diff -urN linux-atm.old/configure linux-atm.dev/configure
  
  
 -                                                                                                                                                                                                                                                                              ac_config_files="$ac_config_files Makefile doc/Makefile m4/Makefile src/Makefile src/include/Makefile src/lib/Makefile src/test/Makefile src/debug/Makefile src/qgen/Makefile src/saal/Makefile src/sigd/Makefile src/maint/Makefile src/arpd/Makefile src/ilmid/Makefile src/ilmid/asn1/Makefile src/man/Makefile src/led/Makefile src/lane/Makefile src/mpoad/Makefile src/switch/Makefile src/switch/debug/Makefile src/switch/tcp/Makefile src/config/Makefile src/config/init-redhat/Makefile src/extra/Makefile src/extra/linux-atm.spec src/extra/ANS/Makefile"
-+                                                                      ac_config_files="$ac_config_files Makefile doc/Makefile m4/Makefile src/Makefile src/include/Makefile src/lib/Makefile src/br2684/Makefile"
++                                                                      ac_config_files="$ac_config_files Makefile doc/Makefile m4/Makefile src/Makefile src/include/Makefile src/lib/Makefile"
  cat >confcache <<\_ACEOF
  # This file is a shell script that caches the results of configure
  # tests run on this system so they can be shared between configure
@@ -11283,7 +11283,7 @@ diff -urN linux-atm.old/configure linux-atm.dev/configure
  This config.status script is free software; the Free Software Foundation
  gives unlimited permission to copy, distribute and modify it."
  srcdir=$srcdir
-@@ -9080,27 +9367,7 @@
+@@ -9080,27 +9367,6 @@
    "src/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/Makefile" ;;
    "src/include/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/include/Makefile" ;;
    "src/lib/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/lib/Makefile" ;;
@@ -11308,7 +11308,6 @@ diff -urN linux-atm.old/configure linux-atm.dev/configure
 -  "src/extra/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/extra/Makefile" ;;
 -  "src/extra/linux-atm.spec" ) CONFIG_FILES="$CONFIG_FILES src/extra/linux-atm.spec" ;;
 -  "src/extra/ANS/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/extra/ANS/Makefile" ;;
-+  "src/br2684/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/br2684/Makefile" ;;
    "default-1" ) CONFIG_COMMANDS="$CONFIG_COMMANDS default-1" ;;
    "config.h" ) CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;;
    *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
@@ -11855,39 +11854,6 @@ diff -urN linux-atm.old/Makefile.in linux-atm.dev/Makefile.in
  STRIP = @STRIP@
  VERSION = @VERSION@
  YACC = @YACC@
-diff -urN linux-atm.old/src/br2684/Makefile.in linux-atm.dev/src/br2684/Makefile.in
---- linux-atm.old/src/br2684/Makefile.in	2005-08-23 01:12:10.884781000 +0200
-+++ linux-atm.dev/src/br2684/Makefile.in	2005-08-23 01:12:46.632347232 +0200
-@@ -57,11 +57,15 @@
- NORMAL_UNINSTALL = :
- PRE_UNINSTALL = :
- POST_UNINSTALL = :
-+build_alias = @build_alias@
-+build_triplet = @build@
- host_alias = @host_alias@
- host_triplet = @host@
-+target_alias = @target_alias@
-+target_triplet = @target@
- AR = @AR@
- AS = @AS@
--CC = /usr/src/openwrt/staging_dir_mipsel/bin/mipsel-linux-gcc
-+CC = @CC@
- CXX = @CXX@
- CXXCPP = @CXXCPP@
- DLLTOOL = @DLLTOOL@
-@@ -117,9 +121,9 @@
- br2684ctl_DEPENDENCIES =  $(top_builddir)/src/lib/libatm.la
- br2684ctl_LDFLAGS = 
- CFLAGS = @CFLAGS@
--COMPILE = $(TARGET_CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
--LTCOMPILE = $(LIBTOOL) --mode=compile $(TARGET_CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
--CCLD = $(TARGET_CC)
-+COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-+LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-+CCLD = $(CC)
- LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
- man8dir = $(mandir)/man8
- MANS = $(man_MANS)
 diff -urN linux-atm.old/src/include/Makefile.in linux-atm.dev/src/include/Makefile.in
 --- linux-atm.old/src/include/Makefile.in	2005-08-23 01:12:10.851786000 +0200
 +++ linux-atm.dev/src/include/Makefile.in	2005-08-23 01:12:46.585354376 +0200
@@ -12008,7 +11974,7 @@ diff -urN linux-atm.old/src/Makefile.in linux-atm.dev/src/Makefile.in
  
 -SUBDIRS = include lib 
 -
-+SUBDIRS = include lib br2684
++SUBDIRS = include lib
  mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
  CONFIG_HEADER = ../config.h
  CONFIG_CLEAN_FILES =