From 704ec3531351d45a54ddb8a74b7d13476e54f477 Mon Sep 17 00:00:00 2001 From: nbd Date: Fri, 20 Apr 2007 15:11:18 +0000 Subject: upgrade to new version of br2684ctl git-svn-id: svn://svn.openwrt.org/openwrt/trunk@7011 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- package/linux-atm/Makefile | 18 - package/linux-atm/files/br2684.hotplug | 19 - package/linux-atm/patches/000-debian_16.patch | 598 ----------------------- package/linux-atm/patches/100-br2684.patch | 488 ------------------ package/linux-atm/patches/100-subdirs.patch | 161 ++++++ package/linux-atm/patches/300-no_autotools.patch | 40 +- 6 files changed, 164 insertions(+), 1160 deletions(-) delete mode 100644 package/linux-atm/files/br2684.hotplug delete mode 100644 package/linux-atm/patches/100-br2684.patch create mode 100644 package/linux-atm/patches/100-subdirs.patch (limited to 'package/linux-atm') diff --git a/package/linux-atm/Makefile b/package/linux-atm/Makefile index 3fe9dd0c9..4edd36271 100644 --- a/package/linux-atm/Makefile +++ b/package/linux-atm/Makefile @@ -31,16 +31,6 @@ define Package/linux-atm This package contains a library for accessing the Linux ATM subsystem. endef -define Package/br2684ctl - $(call Package/linux-atm/Default) - SECTION:=net - CATEGORY:=Network - DEPENDS:=+linux-atm - TITLE:=RFC2684 bridging utility - DESCRIPTION:=\ - This package contains an ATM RFC2684 bridging utility. -endef - define Build/Configure $(call Build/Configure/Default) # prevent autoheader invocation @@ -74,15 +64,7 @@ define Package/linux-atm/install cp -f $(PKG_INSTALL_DIR)/usr/lib/libatm.so.1 $(1)/usr/lib endef -define Package/br2684ctl/install - $(INSTALL_DIR) $(1)/usr/sbin - $(CP) $(PKG_INSTALL_DIR)/usr/sbin/br2684ctl $(1)/usr/sbin/ - $(INSTALL_DIR) $(1)/etc/hotplug.d/net - $(INSTALL_DATA) ./files/br2684.hotplug $(1)/etc/hotplug.d/net/30-br2684 -endef - $(eval $(call BuildPackage,linux-atm)) -$(eval $(call BuildPackage,br2684ctl)) $(eval $(call RequireCommand,automake, \ $(PKG_NAME) requires automake. \ diff --git a/package/linux-atm/files/br2684.hotplug b/package/linux-atm/files/br2684.hotplug deleted file mode 100644 index 242e7e515..000000000 --- a/package/linux-atm/files/br2684.hotplug +++ /dev/null @@ -1,19 +0,0 @@ -[ "${INTERFACE%%[0-9]*}" = "atm" ] && { - case "$ACTION" in - register) - [ "$pppoe_atm" = 1 ] && { - case "$atm_encaps" in - 0|vc) ENCAPS=0 ;; - 1|llc) ENCAPS=1 ;; - *) ENCAPS=0 ;; - esac - insmod br2684 2>&- >&- - br2684ctl -c0 -e${ENCAPS} -a${atm_vpi:-8}.${atm_vci:-35} & - } - ;; - unregister) - killall br2684ctl 2>&- >&- - rmmod br2684 - ;; - esac -} diff --git a/package/linux-atm/patches/000-debian_16.patch b/package/linux-atm/patches/000-debian_16.patch index 41dc437ca..da82cc832 100644 --- a/package/linux-atm/patches/000-debian_16.patch +++ b/package/linux-atm/patches/000-debian_16.patch @@ -29654,517 +29654,6 @@ @for file in $(DISTFILES); do \ d=$(srcdir); \ if test -d $$d/$$file; then \ ---- linux-atm-2.4.1.orig/src/br2684/Makefile.am -+++ linux-atm-2.4.1/src/br2684/Makefile.am -@@ -0,0 +1,10 @@ -+sbin_PROGRAMS = br2684ctl -+ -+LDADD = $(top_builddir)/src/lib/libatm.la -+ -+br2684ctl_SOURCES = br2684ctl.c -+ -+man_MANS = br2684ctl.8 -+ -+EXTRA_DIST = $(man_MANS) USAGE.br2684 -+ ---- linux-atm-2.4.1.orig/src/br2684/Makefile.in -+++ linux-atm-2.4.1/src/br2684/Makefile.in -@@ -0,0 +1,418 @@ -+# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am -+ -+# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc. -+# This Makefile.in is free software; the Free Software Foundation -+# gives unlimited permission to copy and/or distribute it, -+# with or without modifications, as long as this notice is preserved. -+ -+# This program is distributed in the hope that it will be useful, -+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -+# PARTICULAR PURPOSE. -+ -+ -+SHELL = @SHELL@ -+ -+srcdir = @srcdir@ -+top_srcdir = @top_srcdir@ -+VPATH = @srcdir@ -+prefix = @prefix@ -+exec_prefix = @exec_prefix@ -+ -+bindir = @bindir@ -+sbindir = @sbindir@ -+libexecdir = @libexecdir@ -+datadir = @datadir@ -+sysconfdir = @sysconfdir@ -+sharedstatedir = @sharedstatedir@ -+localstatedir = @localstatedir@ -+libdir = @libdir@ -+infodir = @infodir@ -+mandir = @mandir@ -+includedir = @includedir@ -+oldincludedir = /usr/include -+ -+DESTDIR = -+ -+pkgdatadir = $(datadir)/@PACKAGE@ -+pkglibdir = $(libdir)/@PACKAGE@ -+pkgincludedir = $(includedir)/@PACKAGE@ -+ -+top_builddir = ../.. -+ -+ACLOCAL = @ACLOCAL@ -+AUTOCONF = @AUTOCONF@ -+AUTOMAKE = @AUTOMAKE@ -+AUTOHEADER = @AUTOHEADER@ -+ -+INSTALL = @INSTALL@ -+INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS) -+INSTALL_DATA = @INSTALL_DATA@ -+INSTALL_SCRIPT = @INSTALL_SCRIPT@ -+transform = @program_transform_name@ -+ -+NORMAL_INSTALL = : -+PRE_INSTALL = : -+POST_INSTALL = : -+NORMAL_UNINSTALL = : -+PRE_UNINSTALL = : -+POST_UNINSTALL = : -+host_alias = @host_alias@ -+host_triplet = @host@ -+AR = @AR@ -+AS = @AS@ -+CC = /usr/src/openwrt/staging_dir_mipsel/bin/mipsel-linux-gcc -+CXX = @CXX@ -+CXXCPP = @CXXCPP@ -+DLLTOOL = @DLLTOOL@ -+ECHO = @ECHO@ -+EGREP = @EGREP@ -+EXEEXT = @EXEEXT@ -+F77 = @F77@ -+GCJ = @GCJ@ -+GCJFLAGS = @GCJFLAGS@ -+HAVE_LIB = @HAVE_LIB@ -+LEX = @LEX@ -+LIB = @LIB@ -+LIBTOOL = @LIBTOOL@ -+LIBTOOL_DEPS = @LIBTOOL_DEPS@ -+LIBVER_AGE = @LIBVER_AGE@ -+LIBVER_CURRENT = @LIBVER_CURRENT@ -+LIBVER_REVISION = @LIBVER_REVISION@ -+LN_S = @LN_S@ -+LTLIB = @LTLIB@ -+MAKEINFO = @MAKEINFO@ -+OBJDUMP = @OBJDUMP@ -+OBJEXT = @OBJEXT@ -+PACKAGE = @PACKAGE@ -+PERL = @PERL@ -+RANLIB = @RANLIB@ -+RC = @RC@ -+STRIP = @STRIP@ -+VERSION = @VERSION@ -+YACC = @YACC@ -+ -+sbin_PROGRAMS = br2684ctl -+ -+LDADD = $(top_builddir)/src/lib/libatm.la -+ -+br2684ctl_SOURCES = br2684ctl.c -+ -+man_MANS = br2684ctl.8 -+ -+EXTRA_DIST = $(man_MANS) USAGE.br2684 -+mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs -+CONFIG_HEADER = ../../config.h -+CONFIG_CLEAN_FILES = -+sbin_PROGRAMS = br2684ctl$(EXEEXT) -+PROGRAMS = $(sbin_PROGRAMS) -+ -+ -+DEFS = @DEFS@ -I. -I$(srcdir) -I../.. -+CPPFLAGS = @CPPFLAGS@ -+LDFLAGS = @LDFLAGS@ -+LIBS = @LIBS@ -+br2684ctl_OBJECTS = br2684ctl.$(OBJEXT) -+br2684ctl_LDADD = $(LDADD) -+br2684ctl_DEPENDENCIES = $(top_builddir)/src/lib/libatm.la -+br2684ctl_LDFLAGS = -+CFLAGS = @CFLAGS@ -+COMPILE = $(TARGET_CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -+LTCOMPILE = $(LIBTOOL) --mode=compile $(TARGET_CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -+CCLD = $(TARGET_CC) -+LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@ -+man8dir = $(mandir)/man8 -+MANS = $(man_MANS) -+ -+NROFF = nroff -+DIST_COMMON = Makefile.am Makefile.in -+ -+ -+DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) -+ -+TAR = tar -+GZIP_ENV = --best -+DEP_FILES = .deps/br2684ctl.P -+SOURCES = $(br2684ctl_SOURCES) -+OBJECTS = $(br2684ctl_OBJECTS) -+ -+all: all-redirect -+.SUFFIXES: -+.SUFFIXES: .S .c .lo .o .obj .s -+$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) -+ cd $(top_srcdir) && $(AUTOMAKE) --gnu src/br2684/Makefile -+ -+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES) -+ cd $(top_builddir) \ -+ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status -+ -+ -+mostlyclean-sbinPROGRAMS: -+ -+clean-sbinPROGRAMS: -+ -test -z "$(sbin_PROGRAMS)" || rm -f $(sbin_PROGRAMS) -+ -+distclean-sbinPROGRAMS: -+ -+maintainer-clean-sbinPROGRAMS: -+ -+install-sbinPROGRAMS: $(sbin_PROGRAMS) -+ @$(NORMAL_INSTALL) -+ $(mkinstalldirs) $(DESTDIR)$(sbindir) -+ @list='$(sbin_PROGRAMS)'; for p in $$list; do \ -+ if test -f $$p; then \ -+ echo " $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$p $(DESTDIR)$(sbindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`"; \ -+ $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$p $(DESTDIR)$(sbindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \ -+ else :; fi; \ -+ done -+ -+uninstall-sbinPROGRAMS: -+ @$(NORMAL_UNINSTALL) -+ list='$(sbin_PROGRAMS)'; for p in $$list; do \ -+ rm -f $(DESTDIR)$(sbindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \ -+ done -+ -+# FIXME: We should only use cygpath when building on Windows, -+# and only if it is available. -+.c.obj: -+ $(COMPILE) -c `cygpath -w $<` -+ -+.s.o: -+ $(COMPILE) -c $< -+ -+.S.o: -+ $(COMPILE) -c $< -+ -+mostlyclean-compile: -+ -rm -f *.o core *.core -+ -rm -f *.$(OBJEXT) -+ -+clean-compile: -+ -+distclean-compile: -+ -rm -f *.tab.c -+ -+maintainer-clean-compile: -+ -+.s.lo: -+ $(LIBTOOL) --mode=compile $(COMPILE) -c $< -+ -+.S.lo: -+ $(LIBTOOL) --mode=compile $(COMPILE) -c $< -+ -+mostlyclean-libtool: -+ -rm -f *.lo -+ -+clean-libtool: -+ -rm -rf .libs _libs -+ -+distclean-libtool: -+ -+maintainer-clean-libtool: -+ -+br2684ctl$(EXEEXT): $(br2684ctl_OBJECTS) $(br2684ctl_DEPENDENCIES) -+ @rm -f br2684ctl$(EXEEXT) -+ $(LINK) $(br2684ctl_LDFLAGS) $(br2684ctl_OBJECTS) $(br2684ctl_LDADD) $(LIBS) -+ -+install-man8: -+ $(mkinstalldirs) $(DESTDIR)$(man8dir) -+ @list='$(man8_MANS)'; \ -+ l2='$(man_MANS)'; for i in $$l2; do \ -+ case "$$i" in \ -+ *.8*) list="$$list $$i" ;; \ -+ esac; \ -+ done; \ -+ for i in $$list; do \ -+ if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \ -+ else file=$$i; fi; \ -+ ext=`echo $$i | sed -e 's/^.*\\.//'`; \ -+ inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ -+ inst=`echo $$inst | sed '$(transform)'`.$$ext; \ -+ echo " $(INSTALL_DATA) $$file $(DESTDIR)$(man8dir)/$$inst"; \ -+ $(INSTALL_DATA) $$file $(DESTDIR)$(man8dir)/$$inst; \ -+ done -+ -+uninstall-man8: -+ @list='$(man8_MANS)'; \ -+ l2='$(man_MANS)'; for i in $$l2; do \ -+ case "$$i" in \ -+ *.8*) list="$$list $$i" ;; \ -+ esac; \ -+ done; \ -+ for i in $$list; do \ -+ ext=`echo $$i | sed -e 's/^.*\\.//'`; \ -+ inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ -+ inst=`echo $$inst | sed '$(transform)'`.$$ext; \ -+ echo " rm -f $(DESTDIR)$(man8dir)/$$inst"; \ -+ rm -f $(DESTDIR)$(man8dir)/$$inst; \ -+ done -+install-man: $(MANS) -+ @$(NORMAL_INSTALL) -+ $(MAKE) $(AM_MAKEFLAGS) install-man8 -+uninstall-man: -+ @$(NORMAL_UNINSTALL) -+ $(MAKE) $(AM_MAKEFLAGS) uninstall-man8 -+ -+tags: TAGS -+ -+ID: $(HEADERS) $(SOURCES) $(LISP) -+ list='$(SOURCES) $(HEADERS)'; \ -+ unique=`for i in $$list; do echo $$i; done | \ -+ awk ' { files[$$0] = 1; } \ -+ END { for (i in files) print i; }'`; \ -+ here=`pwd` && cd $(srcdir) \ -+ && mkid -f$$here/ID $$unique $(LISP) -+ -+TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP) -+ tags=; \ -+ here=`pwd`; \ -+ list='$(SOURCES) $(HEADERS)'; \ -+ unique=`for i in $$list; do echo $$i; done | \ -+ awk ' { files[$$0] = 1; } \ -+ END { for (i in files) print i; }'`; \ -+ test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \ -+ || (cd $(srcdir) && etags -o $$here/TAGS $(ETAGS_ARGS) $$tags $$unique $(LISP)) -+ -+mostlyclean-tags: -+ -+clean-tags: -+ -+distclean-tags: -+ -rm -f TAGS ID -+ -+maintainer-clean-tags: -+ -+distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir) -+ -+subdir = src/br2684 -+ -+distdir: $(DISTFILES) -+ here=`cd $(top_builddir) && pwd`; \ -+ top_distdir=`cd $(top_distdir) && pwd`; \ -+ distdir=`cd $(distdir) && pwd`; \ -+ cd $(top_srcdir) \ -+ && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu src/br2684/Makefile -+ @for file in $(DISTFILES); do \ -+ d=$(srcdir); \ -+ if test -d $$d/$$file; then \ -+ cp -pr $$d/$$file $(distdir)/$$file; \ -+ else \ -+ test -f $(distdir)/$$file \ -+ || ln $$d/$$file $(distdir)/$$file 2> /dev/null \ -+ || cp -p $$d/$$file $(distdir)/$$file || :; \ -+ fi; \ -+ done -+ -+DEPS_MAGIC := $(shell mkdir .deps > /dev/null 2>&1 || :) -+ -+-include $(DEP_FILES) -+ -+mostlyclean-depend: -+ -+clean-depend: -+ -+distclean-depend: -+ -rm -rf .deps -+ -+maintainer-clean-depend: -+ -+%.o: %.c -+ @echo '$(COMPILE) -c $<'; \ -+ $(COMPILE) -Wp,-MD,.deps/$(*F).pp -c $< -+ @-cp .deps/$(*F).pp .deps/$(*F).P; \ -+ tr ' ' '\012' < .deps/$(*F).pp \ -+ | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \ -+ >> .deps/$(*F).P; \ -+ rm .deps/$(*F).pp -+ -+%.lo: %.c -+ @echo '$(LTCOMPILE) -c $<'; \ -+ $(LTCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $< -+ @-sed -e 's/^\([^:]*\)\.o[ ]*:/\1.lo \1.o :/' \ -+ < .deps/$(*F).pp > .deps/$(*F).P; \ -+ tr ' ' '\012' < .deps/$(*F).pp \ -+ | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \ -+ >> .deps/$(*F).P; \ -+ rm -f .deps/$(*F).pp -+info-am: -+info: info-am -+dvi-am: -+dvi: dvi-am -+check-am: all-am -+check: check-am -+installcheck-am: -+installcheck: installcheck-am -+install-exec-am: install-sbinPROGRAMS -+install-exec: install-exec-am -+ -+install-data-am: install-man -+install-data: install-data-am -+ -+install-am: all-am -+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am -+install: install-am -+uninstall-am: uninstall-sbinPROGRAMS uninstall-man -+uninstall: uninstall-am -+all-am: Makefile $(PROGRAMS) $(MANS) -+all-redirect: all-am -+install-strip: -+ $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install -+installdirs: -+ $(mkinstalldirs) $(DESTDIR)$(sbindir) $(DESTDIR)$(mandir)/man8 -+ -+ -+mostlyclean-generic: -+ -+clean-generic: -+ -+distclean-generic: -+ -rm -f Makefile $(CONFIG_CLEAN_FILES) -+ -rm -f config.cache config.log stamp-h stamp-h[0-9]* -+ -+maintainer-clean-generic: -+mostlyclean-am: mostlyclean-sbinPROGRAMS mostlyclean-compile \ -+ mostlyclean-libtool mostlyclean-tags mostlyclean-depend \ -+ mostlyclean-generic -+ -+mostlyclean: mostlyclean-am -+ -+clean-am: clean-sbinPROGRAMS clean-compile clean-libtool clean-tags \ -+ clean-depend clean-generic mostlyclean-am -+ -+clean: clean-am -+ -+distclean-am: distclean-sbinPROGRAMS distclean-compile \ -+ distclean-libtool distclean-tags distclean-depend \ -+ distclean-generic clean-am -+ -rm -f libtool -+ -+distclean: distclean-am -+ -+maintainer-clean-am: maintainer-clean-sbinPROGRAMS \ -+ maintainer-clean-compile maintainer-clean-libtool \ -+ maintainer-clean-tags maintainer-clean-depend \ -+ maintainer-clean-generic distclean-am -+ @echo "This command is intended for maintainers to use;" -+ @echo "it deletes files that may require special tools to rebuild." -+ -+maintainer-clean: maintainer-clean-am -+ -+.PHONY: mostlyclean-sbinPROGRAMS distclean-sbinPROGRAMS \ -+clean-sbinPROGRAMS maintainer-clean-sbinPROGRAMS uninstall-sbinPROGRAMS \ -+install-sbinPROGRAMS mostlyclean-compile distclean-compile \ -+clean-compile maintainer-clean-compile mostlyclean-libtool \ -+distclean-libtool clean-libtool maintainer-clean-libtool install-man8 \ -+uninstall-man8 install-man uninstall-man tags mostlyclean-tags \ -+distclean-tags clean-tags maintainer-clean-tags distdir \ -+mostlyclean-depend distclean-depend clean-depend \ -+maintainer-clean-depend info-am info dvi-am dvi check check-am \ -+installcheck-am installcheck install-exec-am install-exec \ -+install-data-am install-data install-am install uninstall-am uninstall \ -+all-redirect all-am all installdirs mostlyclean-generic \ -+distclean-generic clean-generic maintainer-clean-generic clean \ -+mostlyclean distclean maintainer-clean -+ -+ -+# Tell versions [3.59,3.63) of GNU make to not export all variables. -+# Otherwise a system limit (for SysV at least) may be exceeded. -+.NOEXPORT: ---- linux-atm-2.4.1.orig/src/br2684/br2684ctl.8 -+++ linux-atm-2.4.1/src/br2684/br2684ctl.8 -@@ -0,0 +1,74 @@ -+.\" -+.TH br2684ctl 1 "7 Jul 2003" -+.SH NAME -+br2684ctl \- RFC1483/2684 Bridge Daemon -+.SH SYNOPSIS -+.B br2684ctl -+[ -+.BI \-b -+] [[ -+.BI \-c\ n -+] [ -+.BI \-e\ 0|1 -+] [ -+.BI \-s\ sndbuf -+] [ -+.BI \-a\ [itf].vpi.vci -+]] ... -+.SH PARAMETERS -+.TP 15 -+.BI \-a\ [itf].vpi.vci -+ATM PVC number, VPI and VCI. (Required) -+.BI \-b -+Puts the process in the background. -+.TP 15 -+.BI \-c\ n -+br2684 interface number such as 0, 1, ... (Required) -+.TP 15 -+.BI \-e\ 0|1 -+Encapsulation method: 0=LLC, 1=VC mux (the default is 0 or LLC) -+.TP 15 -+.TP 15 -+.BI \-s\ sndbuf -+Send buffer size. Default is 8192. -+.SH DESCRIPTION -+br2684ctl handles RFC1483/2684 bridged PDUs. -+This is most often used in ADSL scenarios where -+.I usually -+the subscribers' -+ethernet traffic is encapsulated in ATM AAL5 (by bridging ADSL modems) -+according to RFC2684. -+The subscriber-side ADSL modem can be external with an ethernet connector -+or an internal ADSL card in a PC. -+RFC1483 has been obsoleted by RFC2684. -+ -+For example it is possible to set up your Linux box to handle several -+ATM PVC's with bridged-1483 (sometimes referred as SNAP) encapsulation. -+The Linux network stack might provide DHCP, IP masquerading, IP firewall services or -+bridge the Ethernet frames just like it had several ethernet interfaces. -+In fact it can have several (logical) ethernet interfaces, where -+ATM is just used as a carrier. -+.SH USAGE -+br2684ctl creates a new network interface named nas[n] -+which is bound to an specific ATM PVC. It requires two mandatory -+arguments: -c, the interface number, and -a, the ATM PVC. It should be -+noted that the order of the command arguments matter; -c should be -+followed by -a. You can create as many interfaces as necessary -+in one go, just make a long command line ;) -+ -+For example, following command will create a nas0 interface which uses -+the ATM PVC with VPI=0 and VCI=401. You need to configure the PVC connection -+0.401 on the ATM switch manually. -+ -+% br2684ctl -c 0 -a 0.401 -+ -+The command will only create a new interface nas0. -+Next step is to assign an IP address and netmask to -+the interface nas0 using the ifconfig command. Using ifconfig, you can -+also assign a Ethernet MAC address to the interface nas0, if necessary. -+ -+% ifconfig nas0 192.168.2.1 netmask 255.255.255.0 -+.SH NOTES -+This man page is based on a tutorial by by Joonbum Byun -+.SH SEE ALSO -+.BR qos (7) --- linux-atm-2.4.1.orig/doc/Makefile.in +++ linux-atm-2.4.1/doc/Makefile.in @@ -1,4 +1,4 @@ @@ -30808,88 +30297,6 @@ ++#endif /* __KERNEL__ */ ++ ++#endif ---- linux-atm-2.4.1.orig/debian/README.br2684 -+++ linux-atm-2.4.1/debian/README.br2684 -@@ -0,0 +1,79 @@ -+README.br2684 -+~~~~~~~~~~~~~ -+ -+The linux-atm CVS includes a program called br2684 which can be used -+to configure br2684 ATM bridging. On request (#216663), the Debian -+maintainer included br2684 in the source package. -+ -+This was done in a way that separates the - unreleased CVS snapshot - -+br2684 program into its own binary package so avoid shipping -+released and unreleased software in the same binary package. -+ -+The modified source package (2.4.1-10) was rejected by Debian -+ftpmaster because he found the package too small to warrant its own -+.deb. -+ -+Hence, atm-tools-br2684 is not built any more. -+ -+You can, however, build your own atm-tools-br2684 package from the -+official Debian source package by following this "script". -+ -+(0) -+Install all build dependencies plus autoconf, libtool, automake. If -+#219936 is still unfixed, copy /usr/bin/autoreconf to a local -+directory and apply the following patch after changing "+@@" to "@@" -+in the first line (this was inserted to be able to feed this readme to -+patch to apply the patch given in (1). -+ -+--- /usr/bin/autoreconf -++++ autoreconf -++@@ -183,7 +183,7 @@ -+ { -+ $autoconf .= ' --force'; -+ $autoheader .= ' --force'; -+- $automake .= ' --force-missing'; -++ $automake .= ''; -+ $autopoint .= ' --force'; -+ $libtoolize .= ' --force'; -+ } -+ -+(1) Apply the following patch -+--- configure.in.orig -++++ configure.in -+@@ -152,6 +152,7 @@ -+ m4/Makefile \ -+ src/Makefile \ -+ src/include/Makefile \ -++ src/br2684/Makefile \ -+ src/lib/Makefile \ -+ src/test/Makefile \ -+ src/debug/Makefile \ -+--- debian/rules.orig -++++ debian/rules -+@@ -11,7 +11,7 @@ -+ export PACKAGE=linux-atm -+ -+ buildindeppackages=atm-dev -+-buildarchpackages=atm-tools libatm1 libatm1-dev -++buildarchpackages=atm-tools atm-tools-br2684 libatm1 libatm1-dev -+ -+ # generate -ppackage1 -ppackage2 ... commandline for debhelper -+ dhbuildarchpackages=$(addprefix -p,$(buildarchpackages)) -+--- src/Makefile.am.orig -++++ src/Makefile.am -+@@ -1,3 +1,3 @@ -+ SUBDIRS = include lib test debug qgen saal sigd maint arpd ilmid man led lane \ -+- mpoad switch config extra -++ mpoad switch config extra br2684 -+ -+ -+(2) -+Invoke autoreconf -f -i -+ -+(3) -+create your own changelog entry and your own local version number -+ -+(4) -+Build the package as usual -+ -+Marc Haber, 2003-11-05 --- linux-atm-2.4.1.orig/debian/control +++ linux-atm-2.4.1/debian/control @@ -0,0 +1,57 @@ @@ -30950,11 +30357,6 @@ + Transfer Mode) related programs. + . + Homepage: http://linux-atm.sourceforge.net/ ---- linux-atm-2.4.1.orig/debian/atm-tools-br2684.dirs -+++ linux-atm-2.4.1/debian/atm-tools-br2684.dirs -@@ -0,0 +1,2 @@ -+usr/sbin -+usr/share/man/man8 --- linux-atm-2.4.1.orig/debian/rules +++ linux-atm-2.4.1/debian/rules @@ -0,0 +1,136 @@ diff --git a/package/linux-atm/patches/100-br2684.patch b/package/linux-atm/patches/100-br2684.patch deleted file mode 100644 index dfb1de020..000000000 --- a/package/linux-atm/patches/100-br2684.patch +++ /dev/null @@ -1,488 +0,0 @@ -diff -ruN linux-atm-2.4.1/configure.in linux-atm-2.4.1.new/configure.in ---- linux-atm-2.4.1/configure.in 2003-04-25 04:17:05.000000000 +0200 -+++ linux-atm-2.4.1.new/configure.in 2005-07-27 15:45:49.532396543 +0200 -@@ -153,26 +153,6 @@ - src/Makefile \ - src/include/Makefile \ - src/lib/Makefile \ -- src/test/Makefile \ -- src/debug/Makefile \ -- src/qgen/Makefile \ -- src/saal/Makefile \ -- src/sigd/Makefile \ -- src/maint/Makefile \ -- src/arpd/Makefile \ -- src/ilmid/Makefile \ -- src/ilmid/asn1/Makefile \ -- src/man/Makefile \ -- src/led/Makefile \ -- src/lane/Makefile \ -- src/mpoad/Makefile \ -- src/switch/Makefile \ -- src/switch/debug/Makefile \ -- src/switch/tcp/Makefile \ -- src/config/Makefile \ -- src/config/init-redhat/Makefile \ -- src/extra/Makefile \ -- src/extra/linux-atm.spec \ -- src/extra/ANS/Makefile -+ src/br2684/Makefile \ - ) - -diff -ruN linux-atm-2.4.1/src/br2684/Makefile linux-atm-2.4.1.new/src/br2684/Makefile ---- linux-atm-2.4.1/src/br2684/Makefile 1970-01-01 02:00:00.000000000 +0200 -+++ linux-atm-2.4.1.new/src/br2684/Makefile 2002-07-15 23:44:25.000000000 +0200 -@@ -0,0 +1,13 @@ -+PREFIX=${TI_FILESYSTEM} -+ -+all: br2684ctl -+ -+br2684ctl: br2684ctl.c -+ gcc -latm -o br2684ctl br2684ctl.c -+ strip br2684ctl -+ -+install: br2684ctl -+ cp br2684ctl $(PREFIX)/usr/sbin/ -+ -+clean: -+ rm -rf br2684ctl *.o -diff -ruN linux-atm-2.4.1/src/Makefile.am linux-atm-2.4.1.new/src/Makefile.am ---- linux-atm-2.4.1/src/Makefile.am 2001-10-03 23:14:53.000000000 +0200 -+++ linux-atm-2.4.1.new/src/Makefile.am 2005-07-27 15:33:52.389309711 +0200 -@@ -1,3 +1,2 @@ --SUBDIRS = include lib test debug qgen saal sigd maint arpd ilmid man led lane \ -- mpoad switch config extra -+SUBDIRS = include lib br2684 - - -diff -Nur linux-atm-2.4.1.orig/src/include/linux/atmbr2684.h linux-atm-2.4.1/src/include/linux/atmbr2684.h ---- linux-atm-2.4.1.orig/src/include/linux/atmbr2684.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-atm-2.4.1/src/include/linux/atmbr2684.h 2005-11-13 00:06:42.000000000 +0100 -@@ -0,0 +1,117 @@ -+#ifndef _LINUX_ATMBR2684_H -+#define _LINUX_ATMBR2684_H -+ -+#include -+#include /* For IFNAMSIZ */ -+#include /* ETH_P_* */ -+ -+/* -+ * Type of media we're bridging (ethernet, token ring, etc) Currently only -+ * ethernet is supported -+ */ -+#define BR2684_MEDIA_ETHERNET (0) /* 802.3 */ -+#define BR2684_MEDIA_802_4 (1) /* 802.4 */ -+#define BR2684_MEDIA_TR (2) /* 802.5 - token ring */ -+#define BR2684_MEDIA_FDDI (3) -+#define BR2684_MEDIA_802_6 (4) /* 802.6 */ -+ -+/* -+ * Is there FCS inbound on this VC? This currently isn't supported. -+ */ -+#define BR2684_FCSIN_NO (0) -+#define BR2684_FCSIN_IGNORE (1) -+#define BR2684_FCSIN_VERIFY (2) -+ -+/* -+ * Is there FCS outbound on this VC? This currently isn't supported. -+ */ -+#define BR2684_FCSOUT_NO (0) -+#define BR2684_FCSOUT_SENDZERO (1) -+#define BR2684_FCSOUT_GENERATE (2) -+ -+/* -+ * Does this VC include LLC encapsulation? -+ */ -+#define BR2684_ENCAPS_VC (0) /* VC-mux */ -+#define BR2684_ENCAPS_LLC (1) -+#define BR2684_ENCAPS_AUTODETECT (2) /* Unsuported */ -+ -+/* -+ * Is this VC bridged or routed? -+ */ -+ -+#define BR2684_PAYLOAD_ROUTED (0) -+#define BR2684_PAYLOAD_BRIDGED (1) -+ -+ -+/* -+ * This is for the ATM_NEWBACKENDIF call - these are like socket families: -+ * the first element of the structure is the backend number and the rest -+ * is per-backend specific -+ */ -+struct atm_newif_br2684 { -+ atm_backend_t backend_num; /* ATM_BACKEND_BR2684 */ -+ int media; /* BR2684_MEDIA_* */ -+ char ifname[IFNAMSIZ]; -+ int mtu; -+ int payload; /* bridged or routed */ -+}; -+ -+/* -+ * This structure is used to specify a br2684 interface - either by a -+ * positive integer (returned by ATM_NEWBACKENDIF) or the interfaces name -+ */ -+#define BR2684_FIND_BYNOTHING (0) -+#define BR2684_FIND_BYNUM (1) -+#define BR2684_FIND_BYIFNAME (2) -+struct br2684_if_spec { -+ int method; /* BR2684_FIND_* */ -+ union { -+ char ifname[IFNAMSIZ]; -+ int devnum; -+ } spec; -+}; -+ -+/* -+ * This is for the ATM_SETBACKEND call - these are like socket families: -+ * the first element of the structure is the backend number and the rest -+ * is per-backend specific -+ */ -+struct atm_backend_br2684 { -+ atm_backend_t backend_num; /* ATM_BACKEND_BR2684 */ -+ struct br2684_if_spec ifspec; -+ int fcs_in; /* BR2684_FCSIN_* */ -+ int fcs_out; /* BR2684_FCSOUT_* */ -+ int fcs_auto; /* 1: fcs_{in,out} disabled if no FCS rx'ed */ -+ int encaps; /* BR2684_ENCAPS_* */ -+ int payload; /* BR2684_PAYLOAD_* */ -+ int has_vpiid; /* 1: use vpn_id - Unsupported */ -+ __u8 vpn_id[7]; -+ int send_padding; /* unsupported */ -+ int min_size; /* we will pad smaller packets than this */ -+}; -+ -+/* -+ * The BR2684_SETFILT ioctl is an experimental mechanism for folks -+ * terminating a large number of IP-only vcc's. When netfilter allows -+ * efficient per-if in/out filters, this support will be removed -+ */ -+struct br2684_filter { -+ __u32 prefix; /* network byte order */ -+ __u32 netmask; /* 0 = disable filter */ -+}; -+ -+struct br2684_filter_set { -+ struct br2684_if_spec ifspec; -+ struct br2684_filter filter; -+}; -+ -+enum br2684_payload { -+ p_routed = BR2684_PAYLOAD_ROUTED, -+ p_bridged = BR2684_PAYLOAD_BRIDGED, -+}; -+ -+#define BR2684_SETFILT _IOW( 'a', ATMIOC_BACKEND + 0, \ -+ struct br2684_filter_set) -+ -+#endif /* _LINUX_ATMBR2684_H */ ---- linux-atm-2.4.1/src/br2684/br2684ctl.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-atm-2.4.1.new/src/br2684/br2684ctl.c 2006-02-07 14:19:42.000000000 +0100 -@@ -0,0 +1,307 @@ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+/* Written by Marcell GAL to make use of the */ -+/* ioctls defined in the br2684... kernel patch */ -+/* Compile with cc -o br2684ctl br2684ctl.c -latm */ -+ -+/* -+ Modified feb 2001 by Stephen Aaskov (saa@lasat.com) -+ - Added daemonization code -+ - Added syslog -+ -+ TODO: Delete interfaces after exit? -+*/ -+ -+ -+#define LOG_NAME "RFC1483/2684 bridge" -+#define LOG_OPTION LOG_PERROR -+#define LOG_FACILITY LOG_LOCAL0 -+ -+ -+int lastsock, lastitf; -+ -+void fatal(char *str, int i) -+{ -+ syslog(LOG_ERR, "Fatal: %s", str); -+ exit(-2); -+}; -+ -+ -+void exitFunc(void) -+{ -+ syslog(LOG_PID, "Daemon terminated\n"); -+} -+ -+ -+int create_pidfile(char *nstr) -+{ -+ FILE *pidfile = NULL; -+ char name[20]; -+ int num; -+ -+ if (nstr == NULL) -+ return -1; -+ num = atoi(nstr); -+ if (num < 0) -+ return -1; -+ -+ snprintf(name, 20, "/var/run/nas%d.pid", num); -+ pidfile = fopen(name, "w"); -+ if (pidfile == NULL) -+ return -1; -+ fprintf(pidfile, "%d", getpid()); -+ fclose(pidfile); -+ -+ return 0; -+} -+ -+int create_br(char *nstr, int payload) -+{ -+ int num, err; -+ -+ if (lastsock < 0) { -+ lastsock = socket(PF_ATMPVC, SOCK_DGRAM, ATM_AAL5); -+ } -+ if (lastsock < 0) { -+ syslog(LOG_ERR, "socket creation failed: %s", -+ strerror(errno)); -+ } else { -+ /* create the device with ioctl: */ -+ num = atoi(nstr); -+ if (num >= 0 && num < 1234567890) { -+ struct atm_newif_br2684 ni; -+ ni.backend_num = ATM_BACKEND_BR2684; -+ ni.media = BR2684_MEDIA_ETHERNET; -+ ni.mtu = 1500; -+ ni.payload = payload; /* bridged or routed */ -+ sprintf(ni.ifname, "nas%d", num); -+ err = ioctl(lastsock, ATM_NEWBACKENDIF, &ni); -+ -+ if (err == 0) -+ syslog(LOG_INFO, -+ "Interface \"%s\" (mtu=%d, payload=%s) created sucessfully\n", -+ ni.ifname, ni.mtu,ni.payload ? "bridged" : "routed"); -+ else -+ syslog(LOG_INFO, -+ "Interface \"%s\" could not be created, reason: %s\n", -+ ni.ifname, strerror(errno)); -+ lastitf = num; /* even if we didn't create, because existed, assign_vcc wil want to know it! */ -+ } else { -+ syslog(LOG_ERR, "err: strange interface number %d", -+ num); -+ } -+ } -+ return 0; -+} -+ -+ -+int assign_vcc(char *astr, int encap, int payload, int bufsize) -+{ -+ int err, errno; -+ struct atm_qos qos; -+ struct sockaddr_atmpvc addr; -+ int fd; -+ struct atm_backend_br2684 be; -+ -+ memset(&addr, 0, sizeof(addr)); -+ err = -+ text2atm(astr, (struct sockaddr *) (&addr), sizeof(addr), -+ T2A_PVC); -+ if (err != 0) -+ syslog(LOG_ERR, -+ "Could not parse ATM parameters (error=%d)\n", err); -+ -+#if 0 -+ addr.sap_family = AF_ATMPVC; -+ addr.sap_addr.itf = itf; -+ addr.sap_addr.vpi = 0; -+ addr.sap_addr.vci = vci; -+#endif -+ syslog(LOG_INFO, -+ "Communicating over ATM %d.%d.%d, encapsulation: %s\n", -+ addr.sap_addr.itf, addr.sap_addr.vpi, addr.sap_addr.vci, -+ encap ? "VC mux" : "LLC"); -+ -+ if ((fd = socket(PF_ATMPVC, SOCK_DGRAM, ATM_AAL5)) < 0) -+ syslog(LOG_ERR, "failed to create socket %d, reason: %s", -+ errno, strerror(errno)); -+ -+ -+ memset(&qos, 0, sizeof(qos)); -+ qos.aal = ATM_AAL5; -+ qos.txtp.traffic_class = ATM_UBR; -+ qos.txtp.max_sdu = 1524; -+ qos.txtp.pcr = ATM_MAX_PCR; -+ qos.rxtp = qos.txtp; -+ -+ if ((err = -+ setsockopt(fd, SOL_SOCKET, SO_SNDBUF, &bufsize, -+ sizeof(bufsize)))) -+ syslog(LOG_ERR, "setsockopt SO_SNDBUF: (%d) %s\n", err, -+ strerror(err)); -+ -+ if (setsockopt(fd, SOL_ATM, SO_ATMQOS, &qos, sizeof(qos)) < 0) -+ syslog(LOG_ERR, "setsockopt SO_ATMQOS %d", errno); -+ -+ err = -+ connect(fd, (struct sockaddr *) &addr, -+ sizeof(struct sockaddr_atmpvc)); -+ -+ if (err < 0) -+ fatal("failed to connect on socket", err); -+ -+ /* attach the vcc to device: */ -+ -+ be.backend_num = ATM_BACKEND_BR2684; -+ be.ifspec.method = BR2684_FIND_BYIFNAME; -+ sprintf(be.ifspec.spec.ifname, "nas%d", lastitf); -+ be.fcs_in = BR2684_FCSIN_NO; -+ be.fcs_out = BR2684_FCSOUT_NO; -+ be.fcs_auto = 0; -+ be.encaps = encap ? BR2684_ENCAPS_VC : BR2684_ENCAPS_LLC; -+ be.payload = payload; -+ be.has_vpiid = 0; -+ be.send_padding = 0; -+ be.min_size = 0; -+ err = ioctl(fd, ATM_SETBACKEND, &be); -+ if (err == 0) -+ syslog(LOG_INFO, "Interface configured"); -+ else { -+ syslog(LOG_ERR, "Could not configure interface:%s", -+ strerror(errno)); -+ exit(2); -+ } -+ return fd; -+} -+ -+ -+ -+void usage(char *s) -+{ -+ printf("usage: %s [-b] [[-c number] [-e 0|1] [-p 0|1] [-s num] [-a [itf.]vpi.vci]*]*\n" -+ " -b = run in background (daemonize)\n" -+ " -c = use interface nas\n" -+ " -e 0|1 = encapsulation (0=LLC, 1=VC Mux)\n" -+ " -p 0|1 = payload type (0=routed,1=bridged)\n" -+ " -s = set sndbuf (send buffer) size (default 8192)\n" -+ " -a [itf.]vpi.vci = ATM interface no, VPI, VCI\n", -+ s); -+ exit(1); -+} -+ -+ -+ -+int main(int argc, char **argv) -+{ -+ int c, background = 0, encap = 0, sndbuf = 8192, payload = 1; -+ char *itfnum = NULL; -+ -+ lastsock = -1; -+ lastitf = 0; -+ -+ openlog(LOG_NAME, LOG_OPTION, LOG_FACILITY); -+ if (argc > 1) -+ while ((c = getopt(argc, argv, "a:bc:e:s:p:t:?h")) != EOF) -+ switch (c) { -+ case 'a': -+ assign_vcc(optarg, encap, payload, sndbuf); -+ break; -+ case 'b': -+ background = 1; -+ break; -+ case 'c': -+ create_br(optarg, payload); -+ itfnum = strdup(optarg); -+ break; -+ case 'e': -+ encap = (atoi(optarg)); -+ if (encap < 0) { -+ syslog(LOG_ERR, -+ "invalid encapsulation: %s:\n", -+ optarg); -+ encap = 0; -+ } -+ break; -+ case 's': -+ sndbuf = (atoi(optarg)); -+ if (sndbuf < 0) { -+ syslog(LOG_ERR, -+ "Invalid sndbuf: %s, using size of 8192 instead\n", -+ optarg); -+ sndbuf = 8192; -+ } -+ break; -+ case 'p': /* payload type: routed (0) or bridged (1) */ -+ payload = atoi(optarg); -+ break; -+ case '?': -+ case 'h': -+ default: -+ usage(argv[0]); -+ } else -+ usage(argv[0]); -+ -+ if (argc != optind) -+ usage(argv[0]); -+ -+ if (lastsock >= 0) -+ close(lastsock); -+ -+ if (background) { -+ pid_t pid; -+ -+ pid = fork(); -+ if (pid < 0) { -+ fprintf(stderr, "Error detaching\n"); -+ exit(2); -+ } else if (pid) -+ exit(0); // This is the parent -+ -+ // Become a process group and session group leader -+ if (setsid() < 0) { -+ fprintf(stderr, "Could not set process group\n"); -+ exit(2); -+ } -+ // Fork again to let process group leader exit -+ pid = fork(); -+ if (pid < 0) { -+ fprintf(stderr, -+ "Error detaching during second fork\n"); -+ exit(2); -+ } else if (pid) -+ exit(0); // This is the parent -+ -+ // Now we're ready for buisness -+ chdir("/"); // Don't keep directories in use -+ close(0); -+ close(1); -+ close(2); // Close stdin, -out and -error -+ /* -+ Note that this implementation does not keep an open -+ stdout/err. -+ If we need them they can be opened now -+ */ -+ -+ } -+ -+ if (itfnum != NULL) { -+ create_pidfile(itfnum); -+ free(itfnum); -+ } -+ -+ syslog(LOG_INFO, "RFC 1483/2684 bridge daemon started\n"); -+ atexit(exitFunc); -+ -+ while (1) -+ sleep(30); /* to keep the sockets... */ -+ return 0; -+} diff --git a/package/linux-atm/patches/100-subdirs.patch b/package/linux-atm/patches/100-subdirs.patch new file mode 100644 index 000000000..073f68bd3 --- /dev/null +++ b/package/linux-atm/patches/100-subdirs.patch @@ -0,0 +1,161 @@ +diff -ruN linux-atm-2.4.1/configure.in linux-atm-2.4.1.new/configure.in +--- linux-atm-2.4.1/configure.in 2003-04-25 04:17:05.000000000 +0200 ++++ linux-atm-2.4.1.new/configure.in 2005-07-27 15:45:49.532396543 +0200 +@@ -153,26 +153,5 @@ + src/Makefile \ + src/include/Makefile \ + src/lib/Makefile \ +- src/test/Makefile \ +- src/debug/Makefile \ +- src/qgen/Makefile \ +- src/saal/Makefile \ +- src/sigd/Makefile \ +- src/maint/Makefile \ +- src/arpd/Makefile \ +- src/ilmid/Makefile \ +- src/ilmid/asn1/Makefile \ +- src/man/Makefile \ +- src/led/Makefile \ +- src/lane/Makefile \ +- src/mpoad/Makefile \ +- src/switch/Makefile \ +- src/switch/debug/Makefile \ +- src/switch/tcp/Makefile \ +- src/config/Makefile \ +- src/config/init-redhat/Makefile \ +- src/extra/Makefile \ +- src/extra/linux-atm.spec \ +- src/extra/ANS/Makefile + ) + +diff -ruN linux-atm-2.4.1/src/Makefile.am linux-atm-2.4.1.new/src/Makefile.am +--- linux-atm-2.4.1/src/Makefile.am 2001-10-03 23:14:53.000000000 +0200 ++++ linux-atm-2.4.1.new/src/Makefile.am 2005-07-27 15:33:52.389309711 +0200 +@@ -1,3 +1,2 @@ +-SUBDIRS = include lib test debug qgen saal sigd maint arpd ilmid man led lane \ +- mpoad switch config extra ++SUBDIRS = include lib + + +diff -Nur linux-atm-2.4.1.orig/src/include/linux/atmbr2684.h linux-atm-2.4.1/src/include/linux/atmbr2684.h +--- linux-atm-2.4.1.orig/src/include/linux/atmbr2684.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-atm-2.4.1/src/include/linux/atmbr2684.h 2005-11-13 00:06:42.000000000 +0100 +@@ -0,0 +1,117 @@ ++#ifndef _LINUX_ATMBR2684_H ++#define _LINUX_ATMBR2684_H ++ ++#include ++#include /* For IFNAMSIZ */ ++#include /* ETH_P_* */ ++ ++/* ++ * Type of media we're bridging (ethernet, token ring, etc) Currently only ++ * ethernet is supported ++ */ ++#define BR2684_MEDIA_ETHERNET (0) /* 802.3 */ ++#define BR2684_MEDIA_802_4 (1) /* 802.4 */ ++#define BR2684_MEDIA_TR (2) /* 802.5 - token ring */ ++#define BR2684_MEDIA_FDDI (3) ++#define BR2684_MEDIA_802_6 (4) /* 802.6 */ ++ ++/* ++ * Is there FCS inbound on this VC? This currently isn't supported. ++ */ ++#define BR2684_FCSIN_NO (0) ++#define BR2684_FCSIN_IGNORE (1) ++#define BR2684_FCSIN_VERIFY (2) ++ ++/* ++ * Is there FCS outbound on this VC? This currently isn't supported. ++ */ ++#define BR2684_FCSOUT_NO (0) ++#define BR2684_FCSOUT_SENDZERO (1) ++#define BR2684_FCSOUT_GENERATE (2) ++ ++/* ++ * Does this VC include LLC encapsulation? ++ */ ++#define BR2684_ENCAPS_VC (0) /* VC-mux */ ++#define BR2684_ENCAPS_LLC (1) ++#define BR2684_ENCAPS_AUTODETECT (2) /* Unsuported */ ++ ++/* ++ * Is this VC bridged or routed? ++ */ ++ ++#define BR2684_PAYLOAD_ROUTED (0) ++#define BR2684_PAYLOAD_BRIDGED (1) ++ ++ ++/* ++ * This is for the ATM_NEWBACKENDIF call - these are like socket families: ++ * the first element of the structure is the backend number and the rest ++ * is per-backend specific ++ */ ++struct atm_newif_br2684 { ++ atm_backend_t backend_num; /* ATM_BACKEND_BR2684 */ ++ int media; /* BR2684_MEDIA_* */ ++ char ifname[IFNAMSIZ]; ++ int mtu; ++ int payload; /* bridged or routed */ ++}; ++ ++/* ++ * This structure is used to specify a br2684 interface - either by a ++ * positive integer (returned by ATM_NEWBACKENDIF) or the interfaces name ++ */ ++#define BR2684_FIND_BYNOTHING (0) ++#define BR2684_FIND_BYNUM (1) ++#define BR2684_FIND_BYIFNAME (2) ++struct br2684_if_spec { ++ int method; /* BR2684_FIND_* */ ++ union { ++ char ifname[IFNAMSIZ]; ++ int devnum; ++ } spec; ++}; ++ ++/* ++ * This is for the ATM_SETBACKEND call - these are like socket families: ++ * the first element of the structure is the backend number and the rest ++ * is per-backend specific ++ */ ++struct atm_backend_br2684 { ++ atm_backend_t backend_num; /* ATM_BACKEND_BR2684 */ ++ struct br2684_if_spec ifspec; ++ int fcs_in; /* BR2684_FCSIN_* */ ++ int fcs_out; /* BR2684_FCSOUT_* */ ++ int fcs_auto; /* 1: fcs_{in,out} disabled if no FCS rx'ed */ ++ int encaps; /* BR2684_ENCAPS_* */ ++ int payload; /* BR2684_PAYLOAD_* */ ++ int has_vpiid; /* 1: use vpn_id - Unsupported */ ++ __u8 vpn_id[7]; ++ int send_padding; /* unsupported */ ++ int min_size; /* we will pad smaller packets than this */ ++}; ++ ++/* ++ * The BR2684_SETFILT ioctl is an experimental mechanism for folks ++ * terminating a large number of IP-only vcc's. When netfilter allows ++ * efficient per-if in/out filters, this support will be removed ++ */ ++struct br2684_filter { ++ __u32 prefix; /* network byte order */ ++ __u32 netmask; /* 0 = disable filter */ ++}; ++ ++struct br2684_filter_set { ++ struct br2684_if_spec ifspec; ++ struct br2684_filter filter; ++}; ++ ++enum br2684_payload { ++ p_routed = BR2684_PAYLOAD_ROUTED, ++ p_bridged = BR2684_PAYLOAD_BRIDGED, ++}; ++ ++#define BR2684_SETFILT _IOW( 'a', ATMIOC_BACKEND + 0, \ ++ struct br2684_filter_set) ++ ++#endif /* _LINUX_ATMBR2684_H */ + diff --git a/package/linux-atm/patches/300-no_autotools.patch b/package/linux-atm/patches/300-no_autotools.patch index 73427296c..1b9be11ec 100644 --- a/package/linux-atm/patches/300-no_autotools.patch +++ b/package/linux-atm/patches/300-no_autotools.patch @@ -11160,7 +11160,7 @@ diff -urN linux-atm.old/configure linux-atm.dev/configure - ac_config_files="$ac_config_files Makefile doc/Makefile m4/Makefile src/Makefile src/include/Makefile src/lib/Makefile src/test/Makefile src/debug/Makefile src/qgen/Makefile src/saal/Makefile src/sigd/Makefile src/maint/Makefile src/arpd/Makefile src/ilmid/Makefile src/ilmid/asn1/Makefile src/man/Makefile src/led/Makefile src/lane/Makefile src/mpoad/Makefile src/switch/Makefile src/switch/debug/Makefile src/switch/tcp/Makefile src/config/Makefile src/config/init-redhat/Makefile src/extra/Makefile src/extra/linux-atm.spec src/extra/ANS/Makefile" -+ ac_config_files="$ac_config_files Makefile doc/Makefile m4/Makefile src/Makefile src/include/Makefile src/lib/Makefile src/br2684/Makefile" ++ ac_config_files="$ac_config_files Makefile doc/Makefile m4/Makefile src/Makefile src/include/Makefile src/lib/Makefile" cat >confcache <<\_ACEOF # This file is a shell script that caches the results of configure # tests run on this system so they can be shared between configure @@ -11283,7 +11283,7 @@ diff -urN linux-atm.old/configure linux-atm.dev/configure This config.status script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it." srcdir=$srcdir -@@ -9080,27 +9367,7 @@ +@@ -9080,27 +9367,6 @@ "src/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/Makefile" ;; "src/include/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/include/Makefile" ;; "src/lib/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/lib/Makefile" ;; @@ -11308,7 +11308,6 @@ diff -urN linux-atm.old/configure linux-atm.dev/configure - "src/extra/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/extra/Makefile" ;; - "src/extra/linux-atm.spec" ) CONFIG_FILES="$CONFIG_FILES src/extra/linux-atm.spec" ;; - "src/extra/ANS/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/extra/ANS/Makefile" ;; -+ "src/br2684/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/br2684/Makefile" ;; "default-1" ) CONFIG_COMMANDS="$CONFIG_COMMANDS default-1" ;; "config.h" ) CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 @@ -11855,39 +11854,6 @@ diff -urN linux-atm.old/Makefile.in linux-atm.dev/Makefile.in STRIP = @STRIP@ VERSION = @VERSION@ YACC = @YACC@ -diff -urN linux-atm.old/src/br2684/Makefile.in linux-atm.dev/src/br2684/Makefile.in ---- linux-atm.old/src/br2684/Makefile.in 2005-08-23 01:12:10.884781000 +0200 -+++ linux-atm.dev/src/br2684/Makefile.in 2005-08-23 01:12:46.632347232 +0200 -@@ -57,11 +57,15 @@ - NORMAL_UNINSTALL = : - PRE_UNINSTALL = : - POST_UNINSTALL = : -+build_alias = @build_alias@ -+build_triplet = @build@ - host_alias = @host_alias@ - host_triplet = @host@ -+target_alias = @target_alias@ -+target_triplet = @target@ - AR = @AR@ - AS = @AS@ --CC = /usr/src/openwrt/staging_dir_mipsel/bin/mipsel-linux-gcc -+CC = @CC@ - CXX = @CXX@ - CXXCPP = @CXXCPP@ - DLLTOOL = @DLLTOOL@ -@@ -117,9 +121,9 @@ - br2684ctl_DEPENDENCIES = $(top_builddir)/src/lib/libatm.la - br2684ctl_LDFLAGS = - CFLAGS = @CFLAGS@ --COMPILE = $(TARGET_CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) --LTCOMPILE = $(LIBTOOL) --mode=compile $(TARGET_CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) --CCLD = $(TARGET_CC) -+COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -+LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -+CCLD = $(CC) - LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@ - man8dir = $(mandir)/man8 - MANS = $(man_MANS) diff -urN linux-atm.old/src/include/Makefile.in linux-atm.dev/src/include/Makefile.in --- linux-atm.old/src/include/Makefile.in 2005-08-23 01:12:10.851786000 +0200 +++ linux-atm.dev/src/include/Makefile.in 2005-08-23 01:12:46.585354376 +0200 @@ -12008,7 +11974,7 @@ diff -urN linux-atm.old/src/Makefile.in linux-atm.dev/src/Makefile.in -SUBDIRS = include lib - -+SUBDIRS = include lib br2684 ++SUBDIRS = include lib mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs CONFIG_HEADER = ../config.h CONFIG_CLEAN_FILES = -- cgit v1.2.3