move wlcompat to the broadcom-wl package

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9528 3c298f89-4303-0410-b956-a3cf2f4a3e73

10 files changed, 3904 insertions, 0 deletions

diff --git a/package/broadcom-wl/src/include/bcmdefs.h b/package/broadcom-wl/src/include/bcmdefs.h
new file mode 100644
index 000000000..8b5abe5d2
--- /dev/null
+++ b/package/broadcom-wl/src/include/bcmdefs.h
@@ -0,0 +1,106 @@
+/*
+ * Misc system wide definitions
+ *
+ * Copyright 2006, Broadcom Corporation
+ * All Rights Reserved.
+ * 
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ * $Id: bcmdefs.h,v 1.1.1.3 2006/04/08 06:13:39 honor Exp $
+ */
+
+#ifndef	_bcmdefs_h_
+#define	_bcmdefs_h_
+
+/*
+ * One doesn't need to include this file explicitly, gets included automatically if
+ * typedefs.h is included.
+ */
+
+/* Reclaiming text and data :
+ * The following macros specify special linker sections that can be reclaimed
+ * after a system is considered 'up'.
+ */
+#if defined(__GNUC__) && defined(BCMRECLAIM)
+extern bool	bcmreclaimed;
+#define BCMINITDATA(_data)	__attribute__ ((__section__ (".dataini." #_data))) _data
+#define BCMINITFN(_fn)		__attribute__ ((__section__ (".textini." #_fn))) _fn
+#else /* #if defined(__GNUC__) && defined(BCMRECLAIM) */
+#define BCMINITDATA(_data)	_data
+#define BCMINITFN(_fn)		_fn
+#define bcmreclaimed		0
+#endif /* #if defined(__GNUC__) && defined(BCMRECLAIM) */
+
+/* Reclaim uninit functions if BCMNODOWN is defined		*/
+/* and if they are not already removed by -gc-sections	*/
+#ifdef BCMNODOWN
+#define BCMUNINITFN(_fn)		BCMINITFN(_fn)
+#else
+#define BCMUNINITFN(_fn)		_fn
+#endif
+
+#ifdef BCMRECLAIM
+#define CONST
+#else
+#define CONST	const
+#endif /* BCMRECLAIM */
+
+/* Compatibility with old-style BCMRECLAIM */
+#define BCMINIT(_id)		_id
+
+
+/* Put some library data/code into ROM to reduce RAM requirements */
+#if defined(__GNUC__) && defined(BCMROMOFFLOAD)
+#define BCMROMDATA(_data)	__attribute__ ((__section__ (".datarom." #_data))) _data
+#define BCMROMFN(_fn)		__attribute__ ((__section__ (".textrom." #_fn))) _fn
+#else
+#define BCMROMDATA(_data)	_data
+#define BCMROMFN(_fn)		_fn
+#endif
+
+/* Bus types */
+#define	SB_BUS			0	/* Silicon Backplane */
+#define	PCI_BUS			1	/* PCI target */
+#define	PCMCIA_BUS		2	/* PCMCIA target */
+#define SDIO_BUS		3	/* SDIO target */
+#define JTAG_BUS		4	/* JTAG */
+#define NO_BUS			0xFF	/* Bus that does not support R/W REG */
+
+/* Allows optimization for single-bus support */
+#ifdef BCMBUSTYPE
+#define BUSTYPE(bus) (BCMBUSTYPE)
+#else
+#define BUSTYPE(bus) (bus)
+#endif
+
+/* Defines for DMA Address Width - Shared between OSL and HNDDMA */
+#define DMADDR_MASK_32 0x0		/* Address mask for 32-bits */
+#define DMADDR_MASK_30 0xc0000000	/* Address mask for 30-bits */
+#define DMADDR_MASK_0  0xffffffff	/* Address mask for 0-bits (hi-part) */
+
+#define	DMADDRWIDTH_30  30 /* 30-bit addressing capability */
+#define	DMADDRWIDTH_32  32 /* 32-bit addressing capability */
+#define	DMADDRWIDTH_63  63 /* 64-bit addressing capability */
+#define	DMADDRWIDTH_64  64 /* 64-bit addressing capability */
+
+/* packet headroom necessary to accomodate the largest header in the system, (i.e TXOFF).
+ * By doing, we avoid the need  to allocate an extra buffer for the header when bridging to WL.
+ * There is a compile time check in wlc.c which ensure that this value is at least as big
+ * as TXOFF. This value is used in dma_rxfill (hnddma.c).
+ */
+#define BCMEXTRAHDROOM 160
+
+/* Headroom required for dongle-to-host communication.  Packets allocated
+ * locally in the dongle (e.g. for CDC ioctls or RNDIS messages) should
+ * leave this much room in front for low-level message headers which may
+ * be needed to get across the dongle bus to the host.  (These messages
+ * don't go over the network, so room for the full WL header above would
+ * be a waste.)
+ */
+#define BCMDONGLEHDRSZ 8
+
+
+
+#endif /* _bcmdefs_h_ */
diff --git a/package/broadcom-wl/src/include/bcmutils.h b/package/broadcom-wl/src/include/bcmutils.h
new file mode 100644
index 000000000..b6e7b0542
--- /dev/null
+++ b/package/broadcom-wl/src/include/bcmutils.h
@@ -0,0 +1,258 @@
+/*
+ * Misc useful os-independent macros and functions.
+ *
+ * Copyright 2006, Broadcom Corporation
+ * All Rights Reserved.
+ * 
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ * $Id: bcmutils.h,v 1.1.1.16 2006/04/08 06:13:39 honor Exp $
+ */
+
+#ifndef	_bcmutils_h_
+#define	_bcmutils_h_
+
+/* ** driver/apps-shared section ** */
+
+#define BCME_STRLEN 		64	/* Max string length for BCM errors */
+#define VALID_BCMERROR(e)  ((e <= 0) && (e >= BCME_LAST))
+
+
+/*
+ * error codes could be added but the defined ones shouldn't be changed/deleted
+ * these error codes are exposed to the user code
+ * when ever a new error code is added to this list
+ * please update errorstring table with the related error string and
+ * update osl files with os specific errorcode map
+*/
+
+#define BCME_OK				0	/* Success */
+#define BCME_ERROR			-1	/* Error generic */
+#define BCME_BADARG			-2	/* Bad Argument */
+#define BCME_BADOPTION			-3	/* Bad option */
+#define BCME_NOTUP			-4	/* Not up */
+#define BCME_NOTDOWN			-5	/* Not down */
+#define BCME_NOTAP			-6	/* Not AP */
+#define BCME_NOTSTA			-7	/* Not STA  */
+#define BCME_BADKEYIDX			-8	/* BAD Key Index */
+#define BCME_RADIOOFF 			-9	/* Radio Off */
+#define BCME_NOTBANDLOCKED		-10	/* Not  band locked */
+#define BCME_NOCLK			-11	/* No Clock */
+#define BCME_BADRATESET			-12	/* BAD Rate valueset */
+#define BCME_BADBAND			-13	/* BAD Band */
+#define BCME_BUFTOOSHORT		-14	/* Buffer too short */
+#define BCME_BUFTOOLONG			-15	/* Buffer too long */
+#define BCME_BUSY			-16	/* Busy */
+#define BCME_NOTASSOCIATED		-17	/* Not Associated */
+#define BCME_BADSSIDLEN			-18	/* Bad SSID len */
+#define BCME_OUTOFRANGECHAN		-19	/* Out of Range Channel */
+#define BCME_BADCHAN			-20	/* Bad Channel */
+#define BCME_BADADDR			-21	/* Bad Address */
+#define BCME_NORESOURCE			-22	/* Not Enough Resources */
+#define BCME_UNSUPPORTED		-23	/* Unsupported */
+#define BCME_BADLEN			-24	/* Bad length */
+#define BCME_NOTREADY			-25	/* Not Ready */
+#define BCME_EPERM			-26	/* Not Permitted */
+#define BCME_NOMEM			-27	/* No Memory */
+#define BCME_ASSOCIATED			-28	/* Associated */
+#define BCME_RANGE			-29	/* Not In Range */
+#define BCME_NOTFOUND			-30	/* Not Found */
+#define BCME_WME_NOT_ENABLED		-31	/* WME Not Enabled */
+#define BCME_TSPEC_NOTFOUND		-32	/* TSPEC Not Found */
+#define BCME_ACM_NOTSUPPORTED		-33	/* ACM Not Supported */
+#define BCME_NOT_WME_ASSOCIATION	-34	/* Not WME Association */
+#define BCME_SDIO_ERROR			-35	/* SDIO Bus Error */
+#define BCME_DONGLE_DOWN		-36	/* Dongle Not Accessible */
+#define BCME_LAST			BCME_DONGLE_DOWN
+
+/* These are collection of BCME Error strings */
+#define BCMERRSTRINGTABLE {		\
+	"OK",				\
+	"Undefined error",		\
+	"Bad Argument",			\
+	"Bad Option",			\
+	"Not up",			\
+	"Not down",			\
+	"Not AP",			\
+	"Not STA",			\
+	"Bad Key Index",		\
+	"Radio Off",			\
+	"Not band locked",		\
+	"No clock",			\
+	"Bad Rate valueset",		\
+	"Bad Band",			\
+	"Buffer too short",		\
+	"Buffer too long",		\
+	"Busy",				\
+	"Not Associated",		\
+	"Bad SSID len",			\
+	"Out of Range Channel",		\
+	"Bad Channel",			\
+	"Bad Address",			\
+	"Not Enough Resources",		\
+	"Unsupported",			\
+	"Bad length",			\
+	"Not Ready",			\
+	"Not Permitted",		\
+	"No Memory",			\
+	"Associated",			\
+	"Not In Range",			\
+	"Not Found",			\
+	"WME Not Enabled",		\
+	"TSPEC Not Found",		\
+	"ACM Not Supported",		\
+	"Not WME Association",		\
+	"SDIO Bus Error",		\
+	"Dongle Not Accessible"		\
+}
+
+#ifndef ABS
+#define	ABS(a)			(((a) < 0)?-(a):(a))
+#endif /* ABS */
+
+#ifndef MIN
+#define	MIN(a, b)		(((a) < (b))?(a):(b))
+#endif /* MIN */
+
+#ifndef MAX
+#define	MAX(a, b)		(((a) > (b))?(a):(b))
+#endif /* MAX */
+
+#define CEIL(x, y)		(((x) + ((y)-1)) / (y))
+#define	ROUNDUP(x, y)		((((x)+((y)-1))/(y))*(y))
+#define	ISALIGNED(a, x)		(((a) & ((x)-1)) == 0)
+#define	ISPOWEROF2(x)		((((x)-1)&(x)) == 0)
+#define VALID_MASK(mask)	!((mask) & ((mask) + 1))
+#define	OFFSETOF(type, member)	((uint)(uintptr)&((type *)0)->member)
+#define ARRAYSIZE(a)		(sizeof(a)/sizeof(a[0]))
+
+/* bit map related macros */
+#ifndef setbit
+#ifndef NBBY		    /* the BSD family defines NBBY */
+#define	NBBY	8	/* 8 bits per byte */
+#endif /* #ifndef NBBY */
+#define	setbit(a, i)	(((uint8 *)a)[(i)/NBBY] |= 1<<((i)%NBBY))
+#define	clrbit(a, i)	(((uint8 *)a)[(i)/NBBY] &= ~(1<<((i)%NBBY)))
+#define	isset(a, i)	(((uint8 *)a)[(i)/NBBY] & (1<<((i)%NBBY)))
+#define	isclr(a, i)	((((uint8 *)a)[(i)/NBBY] & (1<<((i)%NBBY))) == 0)
+#endif /* setbit */
+
+#define	NBITS(type)	(sizeof(type) * 8)
+#define NBITVAL(nbits)	(1 << (nbits))
+#define MAXBITVAL(nbits)	((1 << (nbits)) - 1)
+#define	NBITMASK(nbits)	MAXBITVAL(nbits)
+#define MAXNBVAL(nbyte)	MAXBITVAL((nbyte) * 8)
+
+/* basic mux operation - can be optimized on several architectures */
+#define MUX(pred, true, false) ((pred) ? (true) : (false))
+
+/* modulo inc/dec - assumes x E [0, bound - 1] */
+#define MODDEC(x, bound) MUX((x) == 0, (bound) - 1, (x) - 1)
+#define MODINC(x, bound) MUX((x) == (bound) - 1, 0, (x) + 1)
+
+/* modulo inc/dec, bound = 2^k */
+#define MODDEC_POW2(x, bound) (((x) - 1) & ((bound) - 1))
+#define MODINC_POW2(x, bound) (((x) + 1) & ((bound) - 1))
+
+/* modulo add/sub - assumes x, y E [0, bound - 1] */
+#define MODADD(x, y, bound) \
+    MUX((x) + (y) >= (bound), (x) + (y) - (bound), (x) + (y))
+#define MODSUB(x, y, bound) \
+    MUX(((int)(x)) - ((int)(y)) < 0, (x) - (y) + (bound), (x) - (y))
+
+/* module add/sub, bound = 2^k */
+#define MODADD_POW2(x, y, bound) (((x) + (y)) & ((bound) - 1))
+#define MODSUB_POW2(x, y, bound) (((x) - (y)) & ((bound) - 1))
+
+/* crc defines */
+#define CRC8_INIT_VALUE  0xff		/* Initial CRC8 checksum value */
+#define CRC8_GOOD_VALUE  0x9f		/* Good final CRC8 checksum value */
+#define CRC16_INIT_VALUE 0xffff		/* Initial CRC16 checksum value */
+#define CRC16_GOOD_VALUE 0xf0b8		/* Good final CRC16 checksum value */
+#define CRC32_INIT_VALUE 0xffffffff	/* Initial CRC32 checksum value */
+#define CRC32_GOOD_VALUE 0xdebb20e3	/* Good final CRC32 checksum value */
+
+/* bcm_format_flags() bit description structure */
+typedef struct bcm_bit_desc {
+	uint32	bit;
+	char*	name;
+} bcm_bit_desc_t;
+
+/* tag_ID/length/value_buffer tuple */
+typedef struct bcm_tlv {
+	uint8	id;
+	uint8	len;
+	uint8	data[1];
+} bcm_tlv_t;
+
+/* Check that bcm_tlv_t fits into the given buflen */
+#define bcm_valid_tlv(elt, buflen) ((buflen) >= 2 && (int)(buflen) >= (int)(2 + (elt)->len))
+
+/* buffer length for ethernet address from bcm_ether_ntoa() */
+#define ETHER_ADDR_STR_LEN	18	/* 18-bytes of Ethernet address buffer length */
+
+/* unaligned load and store macros */
+#ifdef IL_BIGENDIAN
+static INLINE uint32
+load32_ua(uint8 *a)
+{
+	return ((a[0] << 24) | (a[1] << 16) | (a[2] << 8) | a[3]);
+}
+
+static INLINE void
+store32_ua(uint8 *a, uint32 v)
+{
+	a[0] = (v >> 24) & 0xff;
+	a[1] = (v >> 16) & 0xff;
+	a[2] = (v >> 8) & 0xff;
+	a[3] = v & 0xff;
+}
+
+static INLINE uint16
+load16_ua(uint8 *a)
+{
+	return ((a[0] << 8) | a[1]);
+}
+
+static INLINE void
+store16_ua(uint8 *a, uint16 v)
+{
+	a[0] = (v >> 8) & 0xff;
+	a[1] = v & 0xff;
+}
+
+#else
+
+static INLINE uint32
+load32_ua(uint8 *a)
+{
+	return ((a[3] << 24) | (a[2] << 16) | (a[1] << 8) | a[0]);
+}
+
+static INLINE void
+store32_ua(uint8 *a, uint32 v)
+{
+	a[3] = (v >> 24) & 0xff;
+	a[2] = (v >> 16) & 0xff;
+	a[1] = (v >> 8) & 0xff;
+	a[0] = v & 0xff;
+}
+
+static INLINE uint16
+load16_ua(uint8 *a)
+{
+	return ((a[1] << 8) | a[0]);
+}
+
+static INLINE void
+store16_ua(uint8 *a, uint16 v)
+{
+	a[1] = (v >> 8) & 0xff;
+	a[0] = v & 0xff;
+}
+
+#endif /* IL_BIGENDIAN */
+
+#endif	/* _bcmutils_h_ */
diff --git a/package/broadcom-wl/src/include/proto/802.11.h b/package/broadcom-wl/src/include/proto/802.11.h
new file mode 100644
index 000000000..2b1c4ee11
--- /dev/null
+++ b/package/broadcom-wl/src/include/proto/802.11.h
@@ -0,0 +1,1258 @@
+/*
+ * Copyright 2006, Broadcom Corporation
+ * All Rights Reserved.
+ * 
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ *
+ * Fundamental types and constants relating to 802.11
+ *
+ * $Id: 802.11.h,v 1.1.1.17 2006/04/15 01:29:08 michael Exp $
+ */
+
+#ifndef _802_11_H_
+#define _802_11_H_
+
+#ifndef _TYPEDEFS_H_
+#include <typedefs.h>
+#endif
+
+#ifndef _NET_ETHERNET_H_
+#include <proto/ethernet.h>
+#endif
+
+#include <proto/wpa.h>
+
+/* enable structure packing */
+#if defined(__GNUC__)
+#define	PACKED	__attribute__((packed))
+#else
+#pragma pack(1)
+#define	PACKED
+#endif
+
+#define DOT11_TU_TO_US			1024	/* 802.11 Time Unit is 1024 microseconds */
+
+/* Generic 802.11 frame constants */
+#define DOT11_A3_HDR_LEN		24	/* d11 header length with A3 */
+#define DOT11_A4_HDR_LEN		30	/* d11 header length with A4 */
+#define DOT11_MAC_HDR_LEN		DOT11_A3_HDR_LEN	/* MAC header length */
+#define DOT11_FCS_LEN			4	/* d11 FCS length */
+#define DOT11_ICV_LEN			4	/* d11 ICV length */
+#define DOT11_ICV_AES_LEN		8	/* d11 ICV/AES length */
+#define DOT11_QOS_LEN			2	/* d11 QoS length */
+#define DOT11_HTC_LEN			4	/* d11 HT Control field length */
+
+#define DOT11_KEY_INDEX_SHIFT		6	/* d11 key index shift */
+#define DOT11_IV_LEN			4	/* d11 IV length */
+#define DOT11_IV_TKIP_LEN		8	/* d11 IV TKIP length */
+#define DOT11_IV_AES_OCB_LEN		4	/* d11 IV/AES/OCB length */
+#define DOT11_IV_AES_CCM_LEN		8	/* d11 IV/AES/CCM length */
+#define DOT11_IV_MAX_LEN		8	/* maximum iv len for any encryption */
+
+/* Includes MIC */
+#define DOT11_MAX_MPDU_BODY_LEN		2304	/* max MPDU body length */
+/* A4 header + QoS + CCMP + PDU + ICV + FCS = 2352 */
+#define DOT11_MAX_MPDU_LEN		(DOT11_A4_HDR_LEN + \
+					 DOT11_QOS_LEN + \
+					 DOT11_IV_AES_CCM_LEN + \
+					 DOT11_MAX_MPDU_BODY_LEN + \
+					 DOT11_ICV_LEN + \
+					 DOT11_FCS_LEN)	/* d11 max MPDU length */
+
+#define DOT11_MAX_SSID_LEN		32	/* d11 max ssid length */
+
+/* dot11RTSThreshold */
+#define DOT11_DEFAULT_RTS_LEN		2347	/* d11 default RTS length */
+#define DOT11_MAX_RTS_LEN		2347	/* d11 max RTS length */
+
+/* dot11FragmentationThreshold */
+#define DOT11_MIN_FRAG_LEN		256	/* d11 min fragmentation length */
+#define DOT11_MAX_FRAG_LEN		2346	/* Max frag is also limited by aMPDUMaxLength
+						* of the attached PHY
+						*/
+#define DOT11_DEFAULT_FRAG_LEN		2346	/* d11 default fragmentation length */
+
+/* dot11BeaconPeriod */
+#define DOT11_MIN_BEACON_PERIOD		1	/* d11 min beacon period */
+#define DOT11_MAX_BEACON_PERIOD		0xFFFF	/* d11 max beacon period */
+
+/* dot11DTIMPeriod */
+#define DOT11_MIN_DTIM_PERIOD		1	/* d11 min DTIM period */
+#define DOT11_MAX_DTIM_PERIOD		0xFF	/* d11 max DTIM period */
+
+/* 802.2 LLC/SNAP header used by 802.11 per 802.1H */
+#define DOT11_LLC_SNAP_HDR_LEN		8	/* d11 LLC/SNAP header length */
+#define DOT11_OUI_LEN			3	/* d11 OUI length */
+struct dot11_llc_snap_header {
+	uint8	dsap;				/* always 0xAA */
+	uint8	ssap;				/* always 0xAA */
+	uint8	ctl;				/* always 0x03 */
+	uint8	oui[DOT11_OUI_LEN];		/* RFC1042: 0x00 0x00 0x00
+						 * Bridge-Tunnel: 0x00 0x00 0xF8
+						 */
+	uint16	type;				/* ethertype */
+} PACKED;
+
+/* RFC1042 header used by 802.11 per 802.1H */
+#define RFC1042_HDR_LEN	(ETHER_HDR_LEN + DOT11_LLC_SNAP_HDR_LEN)	/* RCF1042 header length */
+
+/* Generic 802.11 MAC header */
+/*
+ * N.B.: This struct reflects the full 4 address 802.11 MAC header.
+ *		 The fields are defined such that the shorter 1, 2, and 3
+ *		 address headers just use the first k fields.
+ */
+struct dot11_header {
+	uint16			fc;		/* frame control */
+	uint16			durid;		/* duration/ID */
+	struct ether_addr	a1;		/* address 1 */
+	struct ether_addr	a2;		/* address 2 */
+	struct ether_addr	a3;		/* address 3 */
+	uint16			seq;		/* sequence control */
+	struct ether_addr	a4;		/* address 4 */
+} PACKED;
+
+/* Control frames */
+
+struct dot11_rts_frame {
+	uint16			fc;		/* frame control */
+	uint16			durid;		/* duration/ID */
+	struct ether_addr	ra;		/* receiver address */
+	struct ether_addr	ta;		/* transmitter address */
+} PACKED;
+#define	DOT11_RTS_LEN		16		/* d11 RTS frame length */
+
+struct dot11_cts_frame {
+	uint16			fc;		/* frame control */
+	uint16			durid;		/* duration/ID */
+	struct ether_addr	ra;		/* receiver address */
+} PACKED;
+#define	DOT11_CTS_LEN		10		/* d11 CTS frame length */
+
+struct dot11_ack_frame {
+	uint16			fc;		/* frame control */
+	uint16			durid;		/* duration/ID */
+	struct ether_addr	ra;		/* receiver address */
+} PACKED;
+#define	DOT11_ACK_LEN		10		/* d11 ACK frame length */
+
+struct dot11_ps_poll_frame {
+	uint16			fc;		/* frame control */
+	uint16			durid;		/* AID */
+	struct ether_addr	bssid;		/* receiver address, STA in AP */
+	struct ether_addr	ta;		/* transmitter address */
+} PACKED;
+#define	DOT11_PS_POLL_LEN	16		/* d11 PS poll frame length */
+
+struct dot11_cf_end_frame {
+	uint16			fc;		/* frame control */
+	uint16			durid;		/* duration/ID */
+	struct ether_addr	ra;		/* receiver address */
+	struct ether_addr	bssid;		/* transmitter address, STA in AP */
+} PACKED;
+#define	DOT11_CS_END_LEN	16		/* d11 CF-END frame length */
+
+/* BA/BAR Control parameters */
+#define DOT11_BA_CTL_POLICY_NORMAL	0x0000	/* normal ack */
+#define DOT11_BA_CTL_POLICY_NOACK	0x0001	/* no ack */
+#define DOT11_BA_CTL_POLICY_MASK	0x0001	/* ack policy mask */
+
+#define DOT11_BA_CTL_MTID		0x0002	/* multi tid BA */
+#define DOT11_BA_CTL_COMPRESSED		0x0004	/* compressed bitmap */
+
+#define DOT11_BA_CTL_NUMMSDU_MASK	0x0FC0	/* num msdu in bitmap mask */
+#define DOT11_BA_CTL_NUMMSDU_SHIFT	6	/* num msdu in bitmap shift */
+
+#define DOT11_BA_CTL_TID_MASK		0xF000	/* tid mask */
+#define DOT11_BA_CTL_TID_SHIFT		12	/* tid shift */
+
+struct dot11_ba_req_frame {
+	uint16			fc;		/* frame control */
+	uint16			durid;		/* duration/ID */
+	struct ether_addr	ra;		/* receiver address */
+	struct ether_addr	ta;		/* transmitter address */
+	uint16			bar_control;	/* BAR Control */
+	uint16			seqnum;		/* Starting Sequence control */
+} PACKED;
+#define DOT11_BA_REQ_LEN	20		/* BAR frame length */
+
+#define DOT11_BA_BITMAP_LEN	128		/* bitmap length */
+#define DOT11_BA_CMP_BITMAP_LEN	8		/* compressed bitmap length */
+struct dot11_ba_frame {
+	uint16			fc;		/* frame control */
+	uint16			durid;		/* duration/ID */
+	struct ether_addr	ra;		/* receiver address */
+	struct ether_addr	ta;		/* transmitter address */
+	uint16			ba_control;	/* BA Control */
+	uint16			seqnum;		/* Starting Sequence control */
+	uint8			bitmap[DOT11_BA_BITMAP_LEN];	/* Block Ack Bitmap */
+} PACKED;
+#define DOT11_BA_LEN		20		/* BA frame length (without bitmap) */
+
+/* Management frame header */
+struct dot11_management_header {
+	uint16			fc;		/* frame control */
+	uint16			durid;		/* duration/ID */
+	struct ether_addr	da;		/* receiver address */
+	struct ether_addr	sa;		/* transmitter address */
+	struct ether_addr	bssid;		/* BSS ID */
+	uint16			seq;		/* sequence control */
+} PACKED;
+#define	DOT11_MGMT_HDR_LEN	24		/* d11 management header length */
+
+/* Management frame payloads */
+
+struct dot11_bcn_prb {
+	uint32			timestamp[2];
+	uint16			beacon_interval;
+	uint16			capability;
+} PACKED;
+#define	DOT11_BCN_PRB_LEN	12		/* d11 beacon probe frame length */
+
+struct dot11_auth {
+	uint16			alg;		/* algorithm */
+	uint16			seq;		/* sequence control */
+	uint16			status;		/* status code */
+} PACKED;
+#define DOT11_AUTH_FIXED_LEN	6		/* length of auth frame without challenge info
+						 * elt
+						 */
+
+struct dot11_assoc_req {
+	uint16			capability;	/* capability information */
+	uint16			listen;		/* listen interval */
+} PACKED;
+#define DOT11_ASSOC_REQ_FIXED_LEN	4	/* length of assoc frame without info elts */
+
+struct dot11_reassoc_req {
+	uint16			capability;	/* capability information */
+	uint16			listen;		/* listen interval */
+	struct ether_addr	ap;		/* Current AP address */
+} PACKED;
+#define DOT11_REASSOC_REQ_FIXED_LEN	10	/* length of assoc frame without info elts */
+
+struct dot11_assoc_resp {
+	uint16			capability;	/* capability information */
+	uint16			status;		/* status code */
+	uint16			aid;		/* association ID */
+} PACKED;
+
+struct dot11_action_measure {
+	uint8	category;
+	uint8	action;
+	uint8	token;
+	uint8	data[1];
+} PACKED;
+#define DOT11_ACTION_MEASURE_LEN	3	/* d11 action measurement header length */
+
+struct dot11_action_switch_channel {
+	uint8	category;
+	uint8	action;
+	uint8	data[5]; /* for switch IE */
+} PACKED;
+
+struct dot11_action_ht_ch_width {
+	uint8	category;
+	uint8	action;
+	uint8	ch_width;
+} PACKED;
+
+struct dot11_action_ht_mimops {
+	uint8	category;
+	uint8	action;
+	uint8	enable;
+	uint8	psmode;
+} PACKED;
+
+/* ************* 802.11h related definitions. ************* */
+typedef struct {
+	uint8 id;
+	uint8 len;
+	uint8 power;
+} dot11_power_cnst_t;
+
+typedef struct {
+	uint8 min;
+	uint8 max;
+} dot11_power_cap_t;
+
+typedef struct {
+	uint8 id;
+	uint8 len;
+	uint8 tx_pwr;
+	uint8 margin;
+} dot11_tpc_rep_t;
+#define DOT11_MNG_IE_TPC_REPORT_LEN	2 	/* length of IE data, not including 2 byte header */
+
+typedef struct {
+	uint8 id;
+	uint8 len;
+	uint8 first_channel;
+	uint8 num_channels;
+} dot11_supp_channels_t;
+
+/* channel switch announcement (CSA) mode type - 802.11h-2003 $7.3.2.20 */
+#define DOT11_CSA_MODE_ADVISORY		0	/* no DOT11_CSA_MODE_NO_TX restriction imposed */
+#define DOT11_CSA_MODE_NO_TX		1	/* no transmission upon receiving CSA frame. */
+
+/* CSA IE data structure */
+struct dot11_channel_switch {
+	uint8 id;
+	uint8 len;
+	uint8 mode;
+	uint8 channel;
+	uint8 count;
+}  PACKED;
+typedef struct dot11_channel_switch dot11_channel_switch_t;
+
+#define DOT11_SWITCH_IE_LEN	3	/* length of IE data, not including 2 byte header */
+
+/* 802.11h Measurement Request/Report IEs */
+/* Measurement Type field */
+#define DOT11_MEASURE_TYPE_BASIC 	0	/* d11 measurement basic type */
+#define DOT11_MEASURE_TYPE_CCA 		1	/* d11 measurement CCA type */
+#define DOT11_MEASURE_TYPE_RPI		2	/* d11 measurement PRI type */
+
+/* Measurement Mode field */
+
+/* Measurement Request Modes */
+#define DOT11_MEASURE_MODE_ENABLE 	(1<<1)	/* d11 measurement enable */
+#define DOT11_MEASURE_MODE_REQUEST	(1<<2)	/* d11 measurement request */
+#define DOT11_MEASURE_MODE_REPORT 	(1<<3)	/* d11 measurement report */
+/* Measurement Report Modes */
+#define DOT11_MEASURE_MODE_LATE 	(1<<0)	/* d11 measurement late */
+#define DOT11_MEASURE_MODE_INCAPABLE	(1<<1)	/* d11 measurement incapable */
+#define DOT11_MEASURE_MODE_REFUSED	(1<<2)	/* d11 measurement refuse */
+/* Basic Measurement Map bits */
+#define DOT11_MEASURE_BASIC_MAP_BSS	((uint8)(1<<0))	/* d11 measurement basic map BSS */
+#define DOT11_MEASURE_BASIC_MAP_OFDM	((uint8)(1<<1))	/* d11 measurement map OFDM */
+#define DOT11_MEASURE_BASIC_MAP_UKNOWN	((uint8)(1<<2))	/* d11 measurement map unknown */
+#define DOT11_MEASURE_BASIC_MAP_RADAR	((uint8)(1<<3))	/* d11 measurement map radar */
+#define DOT11_MEASURE_BASIC_MAP_UNMEAS	((uint8)(1<<4))	/* d11 measurement map unmeasuremnt */
+
+typedef struct {
+	uint8 id;
+	uint8 len;
+	uint8 token;
+	uint8 mode;
+	uint8 type;
+	uint8 channel;
+	uint8 start_time[8];
+	uint16 duration;
+} dot11_meas_req_t;
+#define DOT11_MNG_IE_MREQ_LEN 14	/* d11 measurement request IE length */
+/* length of Measure Request IE data not including variable len */
+#define DOT11_MNG_IE_MREQ_FIXED_LEN 3	/* d11 measurement request IE fixed length */
+
+struct dot11_meas_rep {
+	uint8 id;
+	uint8 len;
+	uint8 token;
+	uint8 mode;
+	uint8 type;
+	union
+	{
+		struct {
+			uint8 channel;
+			uint8 start_time[8];
+			uint16 duration;
+			uint8 map;
+		} PACKED basic;
+		uint8 data[1];
+	} PACKED rep;
+} PACKED;
+typedef struct dot11_meas_rep dot11_meas_rep_t;
+
+/* length of Measure Report IE data not including variable len */
+#define DOT11_MNG_IE_MREP_FIXED_LEN	3	/* d11 measurement response IE fixed length */
+
+struct dot11_meas_rep_basic {
+	uint8 channel;
+	uint8 start_time[8];
+	uint16 duration;
+	uint8 map;
+} PACKED;
+typedef struct dot11_meas_rep_basic dot11_meas_rep_basic_t;
+#define DOT11_MEASURE_BASIC_REP_LEN	12	/* d11 measurement basic report length */
+
+struct dot11_quiet {
+	uint8 id;
+	uint8 len;
+	uint8 count;	/* TBTTs until beacon interval in quiet starts */
+	uint8 period;	/* Beacon intervals between periodic quiet periods ? */
+	uint16 duration;	/* Length of quiet period, in TU's */
+	uint16 offset;	/* TU's offset from TBTT in Count field */
+} PACKED;
+typedef struct dot11_quiet dot11_quiet_t;
+
+typedef struct {
+	uint8 channel;
+	uint8 map;
+} chan_map_tuple_t;
+
+typedef struct {
+	uint8 id;
+	uint8 len;
+	uint8 eaddr[ETHER_ADDR_LEN];
+	uint8 interval;
+	chan_map_tuple_t map[1];
+} dot11_ibss_dfs_t;
+
+/* WME Elements */
+#define WME_OUI			"\x00\x50\xf2"	/* WME OUI */
+#define WME_VER			1	/* WME version */
+#define WME_TYPE		2	/* WME type */
+#define WME_SUBTYPE_IE		0	/* Information Element */
+#define WME_SUBTYPE_PARAM_IE	1	/* Parameter Element */
+#define WME_SUBTYPE_TSPEC	2	/* Traffic Specification */
+
+/* WME Access Category Indices (ACIs) */
+#define AC_BE			0	/* Best Effort */
+#define AC_BK			1	/* Background */
+#define AC_VI			2	/* Video */
+#define AC_VO			3	/* Voice */
+#define AC_COUNT		4	/* number of ACs */
+
+typedef uint8 ac_bitmap_t;	/* AC bitmap of (1 << AC_xx) */
+
+#define AC_BITMAP_NONE		0x0	/* No ACs */
+#define AC_BITMAP_ALL		0xf	/* All ACs */
+#define AC_BITMAP_TST(ab, ac)	(((ab) & (1 << (ac))) != 0)
+
+/* WME Information Element (IE) */
+struct wme_ie {
+	uint8 oui[3];
+	uint8 type;
+	uint8 subtype;
+	uint8 version;
+	uint8 qosinfo;
+} PACKED;
+typedef struct wme_ie wme_ie_t;
+#define WME_IE_LEN 7	/* WME IE length */
+
+struct edcf_acparam {
+	uint8	ACI;
+	uint8	ECW;
+	uint16  TXOP;		/* stored in network order (ls octet first) */
+} PACKED;
+typedef struct edcf_acparam edcf_acparam_t;
+
+/* WME Parameter Element (PE) */
+struct wme_param_ie {
+	uint8 oui[3];
+	uint8 type;
+	uint8 subtype;
+	uint8 version;
+	uint8 qosinfo;
+	uint8 rsvd;
+	edcf_acparam_t acparam[AC_COUNT];
+} PACKED;
+typedef struct wme_param_ie wme_param_ie_t;
+#define WME_PARAM_IE_LEN            24          /* WME Parameter IE length */
+
+/* QoS Info field for IE as sent from AP */
+#define WME_QI_AP_APSD_MASK         0x80        /* U-APSD Supported mask */
+#define WME_QI_AP_APSD_SHIFT        7           /* U-APSD Supported shift */
+#define WME_QI_AP_COUNT_MASK        0x0f        /* Parameter set count mask */
+#define WME_QI_AP_COUNT_SHIFT       0           /* Parameter set count shift */
+
+/* QoS Info field for IE as sent from STA */
+#define WME_QI_STA_MAXSPLEN_MASK    0x60        /* Max Service Period Length mask */
+#define WME_QI_STA_MAXSPLEN_SHIFT   5           /* Max Service Period Length shift */
+#define WME_QI_STA_APSD_ALL_MASK    0xf         /* APSD all AC bits mask */
+#define WME_QI_STA_APSD_ALL_SHIFT   0           /* APSD all AC bits shift */
+#define WME_QI_STA_APSD_BE_MASK     0x8         /* APSD AC_BE mask */
+#define WME_QI_STA_APSD_BE_SHIFT    3           /* APSD AC_BE shift */
+#define WME_QI_STA_APSD_BK_MASK     0x4         /* APSD AC_BK mask */
+#define WME_QI_STA_APSD_BK_SHIFT    2           /* APSD AC_BK shift */
+#define WME_QI_STA_APSD_VI_MASK     0x2         /* APSD AC_VI mask */
+#define WME_QI_STA_APSD_VI_SHIFT    1           /* APSD AC_VI shift */
+#define WME_QI_STA_APSD_VO_MASK     0x1         /* APSD AC_VO mask */
+#define WME_QI_STA_APSD_VO_SHIFT    0           /* APSD AC_VO shift */
+
+/* ACI */
+#define EDCF_AIFSN_MIN               1           /* AIFSN minimum value */
+#define EDCF_AIFSN_MAX               15          /* AIFSN maximum value */
+#define EDCF_AIFSN_MASK              0x0f        /* AIFSN mask */
+#define EDCF_ACM_MASK                0x10        /* ACM mask */
+#define EDCF_ACI_MASK                0x60        /* ACI mask */
+#define EDCF_ACI_SHIFT               5           /* ACI shift */
+
+/* ECW */
+#define EDCF_ECW_MIN                 0           /* cwmin/cwmax exponent minimum value */
+#define EDCF_ECW_MAX                 15          /* cwmin/cwmax exponent maximum value */
+#define EDCF_ECW2CW(exp)             ((1 << (exp)) - 1)
+#define EDCF_ECWMIN_MASK             0x0f        /* cwmin exponent form mask */
+#define EDCF_ECWMAX_MASK             0xf0        /* cwmax exponent form mask */
+#define EDCF_ECWMAX_SHIFT            4           /* cwmax exponent form shift */
+
+/* TXOP */
+#define EDCF_TXOP_MIN                0           /* TXOP minimum value */
+#define EDCF_TXOP_MAX                65535       /* TXOP maximum value */
+#define EDCF_TXOP2USEC(txop)         ((txop) << 5)
+
+/* Default EDCF parameters that AP advertises for STA to use; WMM draft Table 12 */
+#define EDCF_AC_BE_ACI_STA           0x03	/* STA ACI value for best effort AC */
+#define EDCF_AC_BE_ECW_STA           0xA4	/* STA ECW value for best effort AC */
+#define EDCF_AC_BE_TXOP_STA          0x0000	/* STA TXOP value for best effort AC */
+#define EDCF_AC_BK_ACI_STA           0x27	/* STA ACI value for background AC */
+#define EDCF_AC_BK_ECW_STA           0xA4	/* STA ECW value for background AC */
+#define EDCF_AC_BK_TXOP_STA          0x0000	/* STA TXOP value for background AC */
+#define EDCF_AC_VI_ACI_STA           0x42	/* STA ACI value for video AC */
+#define EDCF_AC_VI_ECW_STA           0x43	/* STA ECW value for video AC */
+#define EDCF_AC_VI_TXOP_STA          0x005e	/* STA TXOP value for video AC */
+#define EDCF_AC_VO_ACI_STA           0x62	/* STA ACI value for audio AC */
+#define EDCF_AC_VO_ECW_STA           0x32	/* STA ECW value for audio AC */
+#define EDCF_AC_VO_TXOP_STA          0x002f	/* STA TXOP value for audio AC */
+
+/* Default EDCF parameters that AP uses; WMM draft Table 14 */
+#define EDCF_AC_BE_ACI_AP            0x03	/* AP ACI value for best effort AC */
+#define EDCF_AC_BE_ECW_AP            0x64	/* AP ECW value for best effort AC */
+#define EDCF_AC_BE_TXOP_AP           0x0000	/* AP TXOP value for best effort AC */
+#define EDCF_AC_BK_ACI_AP            0x27	/* AP ACI value for background AC */
+#define EDCF_AC_BK_ECW_AP            0xA4	/* AP ECW value for background AC */
+#define EDCF_AC_BK_TXOP_AP           0x0000	/* AP TXOP value for background AC */
+#define EDCF_AC_VI_ACI_AP            0x41	/* AP ACI value for video AC */
+#define EDCF_AC_VI_ECW_AP            0x43	/* AP ECW value for video AC */
+#define EDCF_AC_VI_TXOP_AP           0x005e	/* AP TXOP value for video AC */
+#define EDCF_AC_VO_ACI_AP            0x61	/* AP ACI value for audio AC */
+#define EDCF_AC_VO_ECW_AP            0x32	/* AP ECW value for audio AC */
+#define EDCF_AC_VO_TXOP_AP           0x002f	/* AP TXOP value for audio AC */
+
+struct dot11_qbss_load_ie {
+	uint8 id; 			/* 11, DOT11_MNG_QBSS_LOAD_ID */
+	uint8 length;
+	uint16 station_count; 		/* total number of STAs associated */
+	uint8 channel_utilization;	/* % of time, normalized to 255, QAP sensed medium busy */
+	uint16 aac; 			/* available admission capacity */
+} PACKED;
+typedef struct dot11_qbss_load_ie dot11_qbss_load_ie_t;
+
+/* nom_msdu_size */
+#define FIXED_MSDU_SIZE 0x8000		/* MSDU size is fixed */
+#define MSDU_SIZE_MASK	0x7fff		/* (Nominal or fixed) MSDU size */
+
+/* surplus_bandwidth */
+/* Represented as 3 bits of integer, binary point, 13 bits fraction */
+#define	INTEGER_SHIFT	13	/* integer shift */
+#define FRACTION_MASK	0x1FFF	/* fraction mask */
+
+/* Management Notification Frame */
+struct dot11_management_notification {
+	uint8 category;			/* DOT11_ACTION_NOTIFICATION */
+	uint8 action;
+	uint8 token;
+	uint8 status;
+	uint8 data[1];			/* Elements */
+} PACKED;
+#define DOT11_MGMT_NOTIFICATION_LEN 4	/* Fixed length */
+
+/* WME Action Codes */
+#define WME_ADDTS_REQUEST	0	/* WME ADDTS request */
+#define WME_ADDTS_RESPONSE	1	/* WME ADDTS response */
+#define WME_DELTS_REQUEST	2	/* WME DELTS request */
+
+/* WME Setup Response Status Codes */
+#define WME_ADMISSION_ACCEPTED	0	/* WME admission accepted */
+#define WME_INVALID_PARAMETERS	1	/* WME invalide parameters */
+#define WME_ADMISSION_REFUSED	3	/* WME admission refused */
+
+/* Macro to take a pointer to a beacon or probe response
+ * header and return the char* pointer to the SSID info element
+ */
+#define BCN_PRB_SSID(hdr) ((char*)(hdr) + DOT11_MGMT_HDR_LEN + DOT11_BCN_PRB_LEN)
+
+/* Authentication frame payload constants */
+#define DOT11_OPEN_SYSTEM	0	/* d11 open authentication */
+#define DOT11_SHARED_KEY	1	/* d11 shared authentication */
+#define DOT11_CHALLENGE_LEN	128	/* d11 chanllenge text length */
+
+/* Frame control macros */
+#define FC_PVER_MASK		0x3	/* PVER mask */
+#define FC_PVER_SHIFT		0	/* PVER shift */
+#define FC_TYPE_MASK		0xC	/* type mask */
+#define FC_TYPE_SHIFT		2	/* type shift */
+#define FC_SUBTYPE_MASK		0xF0	/* subtype mask */
+#define FC_SUBTYPE_SHIFT	4	/* subtype shift */
+#define FC_TODS			0x100	/* to DS */
+#define FC_TODS_SHIFT		8	/* to DS shift */
+#define FC_FROMDS		0x200	/* from DS */
+#define FC_FROMDS_SHIFT		9	/* from DS shift */
+#define FC_MOREFRAG		0x400	/* more frag. */
+#define FC_MOREFRAG_SHIFT	10	/* more frag. shift */
+#define FC_RETRY		0x800	/* retry */
+#define FC_RETRY_SHIFT		11	/* retry shift */
+#define FC_PM			0x1000	/* PM */
+#define FC_PM_SHIFT		12	/* PM shift */
+#define FC_MOREDATA		0x2000	/* more data */
+#define FC_MOREDATA_SHIFT	13	/* more data shift */
+#define FC_WEP			0x4000	/* WEP */
+#define FC_WEP_SHIFT		14	/* WEP shift */
+#define FC_ORDER		0x8000	/* order */
+#define FC_ORDER_SHIFT		15	/* order shift */
+
+/* sequence control macros */
+#define SEQNUM_SHIFT		4	/* seq. number shift */
+#define SEQNUM_MAX		0x1000	/* max seqnum + 1 */
+#define FRAGNUM_MASK		0xF	/* frag. number mask */
+
+/* Frame Control type/subtype defs */
+
+/* FC Types */
+#define FC_TYPE_MNG		0	/* management type */
+#define FC_TYPE_CTL		1	/* control type */
+#define FC_TYPE_DATA		2	/* data type */
+
+/* Management Subtypes */
+#define FC_SUBTYPE_ASSOC_REQ		0	/* assoc. request */
+#define FC_SUBTYPE_ASSOC_RESP		1	/* assoc. response */
+#define FC_SUBTYPE_REASSOC_REQ		2	/* reassoc. request */
+#define FC_SUBTYPE_REASSOC_RESP		3	/* reassoc. response */
+#define FC_SUBTYPE_PROBE_REQ		4	/* probe request */
+#define FC_SUBTYPE_PROBE_RESP		5	/* probe response */
+#define FC_SUBTYPE_BEACON		8	/* beacon */
+#define FC_SUBTYPE_ATIM			9	/* ATIM */
+#define FC_SUBTYPE_DISASSOC		10	/* disassoc. */
+#define FC_SUBTYPE_AUTH			11	/* authentication */
+#define FC_SUBTYPE_DEAUTH		12	/* de-authentication */
+#define FC_SUBTYPE_ACTION		13	/* action */
+
+/* Control Subtypes */
+#define FC_SUBTYPE_BLOCKACK_REQ		8	/* Block Ack Req */
+#define FC_SUBTYPE_BLOCKACK		9	/* Block Ack */
+#define FC_SUBTYPE_PS_POLL		10	/* PS poll */
+#define FC_SUBTYPE_RTS			11	/* RTS */
+#define FC_SUBTYPE_CTS			12	/* CTS */
+#define FC_SUBTYPE_ACK			13	/* ACK */
+#define FC_SUBTYPE_CF_END		14	/* CF-END */
+#define FC_SUBTYPE_CF_END_ACK		15	/* CF-END ACK */
+
+/* Data Subtypes */
+#define FC_SUBTYPE_DATA			0	/* Data */
+#define FC_SUBTYPE_DATA_CF_ACK		1	/* Data + CF-ACK */
+#define FC_SUBTYPE_DATA_CF_POLL		2	/* Data + CF-Poll */
+#define FC_SUBTYPE_DATA_CF_ACK_POLL	3	/* Data + CF-Ack + CF-Poll */
+#define FC_SUBTYPE_NULL			4	/* Null */
+#define FC_SUBTYPE_CF_ACK		5	/* CF-Ack */
+#define FC_SUBTYPE_CF_POLL		6	/* CF-Poll */
+#define FC_SUBTYPE_CF_ACK_POLL		7	/* CF-Ack + CF-Poll */
+#define FC_SUBTYPE_QOS_DATA		8	/* QoS Data */
+#define FC_SUBTYPE_QOS_DATA_CF_ACK	9	/* QoS Data + CF-Ack */
+#define FC_SUBTYPE_QOS_DATA_CF_POLL	10	/* QoS Data + CF-Poll */
+#define FC_SUBTYPE_QOS_DATA_CF_ACK_POLL	11	/* QoS Data + CF-Ack + CF-Poll */
+#define FC_SUBTYPE_QOS_NULL		12	/* QoS Null */
+#define FC_SUBTYPE_QOS_CF_POLL		14	/* QoS CF-Poll */
+#define FC_SUBTYPE_QOS_CF_ACK_POLL	15	/* QoS CF-Ack + CF-Poll */
+
+/* Data Subtype Groups */
+#define FC_SUBTYPE_ANY_QOS(s)		(((s) & 8) != 0)
+#define FC_SUBTYPE_ANY_NULL(s)		(((s) & 4) != 0)
+#define FC_SUBTYPE_ANY_CF_POLL(s)	(((s) & 2) != 0)
+#define FC_SUBTYPE_ANY_CF_ACK(s)	(((s) & 1) != 0)
+
+/* Type/Subtype Combos */
+#define FC_KIND_MASK		(FC_TYPE_MASK | FC_SUBTYPE_MASK)	/* FC kind mask */
+
+#define FC_KIND(t, s)	(((t) << FC_TYPE_SHIFT) | ((s) << FC_SUBTYPE_SHIFT))	/* FC kind */
+
+#define FC_SUBTYPE(fc)	(((fc) & FC_SUBTYPE_MASK) >> FC_SUBTYPE_SHIFT)	/* Subtype from FC */
+#define FC_TYPE(fc)	(((fc) & FC_TYPE_MASK) >> FC_TYPE_SHIFT)	/* Type from FC */
+
+#define FC_ASSOC_REQ	FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_ASSOC_REQ)	/* assoc. request */
+#define FC_ASSOC_RESP	FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_ASSOC_RESP)	/* assoc. response */
+#define FC_REASSOC_REQ	FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_REASSOC_REQ)	/* reassoc. request */
+#define FC_REASSOC_RESP	FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_REASSOC_RESP)	/* reassoc. response */
+#define FC_PROBE_REQ	FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_PROBE_REQ)	/* probe request */
+#define FC_PROBE_RESP	FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_PROBE_RESP)	/* probe response */
+#define FC_BEACON	FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_BEACON)		/* beacon */
+#define FC_DISASSOC	FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_DISASSOC)	/* disassoc */
+#define FC_AUTH		FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_AUTH)		/* authentication */
+#define FC_DEAUTH	FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_DEAUTH)		/* deauthentication */
+#define FC_ACTION	FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_ACTION)		/* action */
+
+#define FC_BLOCKACK_REQ	FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_BLOCKACK_REQ)	/* Block Ack Req */
+#define FC_BLOCKACK	FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_BLOCKACK)	/* Block Ack */
+#define FC_PS_POLL	FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_PS_POLL)	/* PS poll */
+#define FC_RTS		FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_RTS)		/* RTS */
+#define FC_CTS		FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_CTS)		/* CTS */
+#define FC_ACK		FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_ACK)		/* ACK */
+#define FC_CF_END	FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_CF_END)		/* CF-END */
+#define FC_CF_END_ACK	FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_CF_END_ACK)	/* CF-END ACK */
+
+#define FC_DATA		FC_KIND(FC_TYPE_DATA, FC_SUBTYPE_DATA)		/* data */
+#define FC_NULL_DATA	FC_KIND(FC_TYPE_DATA, FC_SUBTYPE_NULL)		/* null data */
+#define FC_DATA_CF_ACK	FC_KIND(FC_TYPE_DATA, FC_SUBTYPE_DATA_CF_ACK)	/* data CF ACK */
+#define FC_QOS_DATA	FC_KIND(FC_TYPE_DATA, FC_SUBTYPE_QOS_DATA)	/* QoS data */
+#define FC_QOS_NULL	FC_KIND(FC_TYPE_DATA, FC_SUBTYPE_QOS_NULL)	/* QoS null */
+
+/* QoS Control Field */
+
+/* 802.1D Priority */
+#define QOS_PRIO_SHIFT		0	/* QoS priority shift */
+#define QOS_PRIO_MASK		0x0007	/* QoS priority mask */
+#define QOS_PRIO(qos)		(((qos) & QOS_PRIO_MASK) >> QOS_PRIO_SHIFT)	/* QoS priority */
+
+/* Traffic Identifier */
+#define QOS_TID_SHIFT		0	/* QoS TID shift */
+#define QOS_TID_MASK		0x000f	/* QoS TID mask */
+#define QOS_TID(qos)		(((qos) & QOS_TID_MASK) >> QOS_TID_SHIFT)	/* QoS TID */
+
+/* End of Service Period (U-APSD) */
+#define QOS_EOSP_SHIFT		4	/* QoS End of Service Period shift */
+#define QOS_EOSP_MASK		0x0010	/* QoS End of Service Period mask */
+#define QOS_EOSP(qos)		(((qos) & QOS_EOSP_MASK) >> QOS_EOSP_SHIFT)	/* Qos EOSP */
+
+/* Ack Policy */
+#define QOS_ACK_NORMAL_ACK	0	/* Normal Ack */
+#define QOS_ACK_NO_ACK		1	/* No Ack (eg mcast) */
+#define QOS_ACK_NO_EXP_ACK	2	/* No Explicit Ack */
+#define QOS_ACK_BLOCK_ACK	3	/* Block Ack */
+#define QOS_ACK_SHIFT		5	/* QoS ACK shift */
+#define QOS_ACK_MASK		0x0060	/* QoS ACK mask */
+#define QOS_ACK(qos)		(((qos) & QOS_ACK_MASK) >> QOS_ACK_SHIFT)	/* QoS ACK */
+
+/* A-MSDU flag */
+#define QOS_AMSDU_SHIFT		7	/* AMSDU shift */
+#define QOS_AMSDU_MASK		0x0080	/* AMSDU mask */
+
+/* Management Frames */
+
+/* Management Frame Constants */
+
+/* Fixed fields */
+#define DOT11_MNG_AUTH_ALGO_LEN		2	/* d11 management auth. algo. length */
+#define DOT11_MNG_AUTH_SEQ_LEN		2	/* d11 management auth. seq. length */
+#define DOT11_MNG_BEACON_INT_LEN	2	/* d11 management beacon interval length */
+#define DOT11_MNG_CAP_LEN		2	/* d11 management cap. length */
+#define DOT11_MNG_AP_ADDR_LEN		6	/* d11 management AP address length */
+#define DOT11_MNG_LISTEN_INT_LEN	2	/* d11 management listen interval length */
+#define DOT11_MNG_REASON_LEN		2	/* d11 management reason length */
+#define DOT11_MNG_AID_LEN		2	/* d11 management AID length */
+#define DOT11_MNG_STATUS_LEN		2	/* d11 management status length */
+#define DOT11_MNG_TIMESTAMP_LEN		8	/* d11 management timestamp length */
+
+/* DUR/ID field in assoc resp is 0xc000 | AID */
+#define DOT11_AID_MASK			0x3fff	/* d11 AID mask */
+
+/* Reason Codes */
+#define DOT11_RC_RESERVED			0	/* d11 RC reserved */
+#define DOT11_RC_UNSPECIFIED			1	/* Unspecified reason */
+#define DOT11_RC_AUTH_INVAL			2	/* Previous authentication no longer
+							 * valid
+							 */
+#define DOT11_RC_DEAUTH_LEAVING			3	/* Deauthenticated because sending station
+							 * is leaving (or has left) IBSS or ESS
+							 */
+#define DOT11_RC_INACTIVITY			4	/* Disassociated due to inactivity */
+#define DOT11_RC_BUSY				5	/* Disassociated because AP is unable
+							 * to handle all currently associated
+							 * stations
+							 */
+#define DOT11_RC_INVAL_CLASS_2			6	/* Class 2 frame received from
+							 * nonauthenticated station
+							 */
+#define DOT11_RC_INVAL_CLASS_3			7	/* Class 3 frame received from
+							 *  nonassociated station
+							 */
+#define DOT11_RC_DISASSOC_LEAVING		8	/* Disassociated because sending station is
+							 * leaving (or has left) BSS
+							 */
+#define DOT11_RC_NOT_AUTH			9	/* Station requesting (re)association is
+							 * not authenticated with responding
+							 * station
+							 */
+#define DOT11_RC_MAX				23	/* Reason codes > 23 are reserved */
+
+/* Status Codes */
+#define DOT11_STATUS_SUCCESS			0	/* Successful */
+#define DOT11_STATUS_FAILURE			1	/* Unspecified failure */
+#define DOT11_STATUS_CAP_MISMATCH		10	/* Cannot support all requested
+							 * capabilities in the Capability
+							 * Information field
+							 */
+#define DOT11_STATUS_REASSOC_FAIL		11	/* Reassociation denied due to inability
+							 * to confirm that association exists
+							 */
+#define DOT11_STATUS_ASSOC_FAIL			12	/* Association denied due to reason
+							 * outside the scope of this standard
+							 */
+#define DOT11_STATUS_AUTH_MISMATCH		13	/* Responding station does not support
+							 * the specified authentication
+							 * algorithm
+							 */
+#define DOT11_STATUS_AUTH_SEQ			14	/* Received an Authentication frame
+							 * with authentication transaction
+							 * sequence number out of expected
+							 * sequence
+							 */
+#define DOT11_STATUS_AUTH_CHALLENGE_FAIL	15	/* Authentication rejected because of
+							 * challenge failure
+							 */
+#define DOT11_STATUS_AUTH_TIMEOUT		16	/* Authentication rejected due to timeout
+							 * waiting for next frame in sequence
+							 */
+#define DOT11_STATUS_ASSOC_BUSY_FAIL		17	/* Association denied because AP is
+							 * unable to handle additional
+							 * associated stations
+							 */
+#define DOT11_STATUS_ASSOC_RATE_MISMATCH	18	/* Association denied due to requesting
+							 * station not supporting all of the
+							 * data rates in the BSSBasicRateSet
+							 * parameter
+							 */
+#define DOT11_STATUS_ASSOC_SHORT_REQUIRED	19	/* Association denied due to requesting
+							 * station not supporting the Short
+							 * Preamble option
+							 */
+#define DOT11_STATUS_ASSOC_PBCC_REQUIRED	20	/* Association denied due to requesting
+							 * station not supporting the PBCC
+							 * Modulation option
+							 */
+#define DOT11_STATUS_ASSOC_AGILITY_REQUIRED	21	/* Association denied due to requesting
+							 * station not supporting the Channel
+							 * Agility option
+							 */
+#define DOT11_STATUS_ASSOC_SPECTRUM_REQUIRED	22	/* Association denied because Spectrum
+							 * Management capability is required.
+							 */
+#define DOT11_STATUS_ASSOC_BAD_POWER_CAP	23	/* Association denied because the info
+							 * in the Power Cap element is
+							 * unacceptable.
+							 */
+#define DOT11_STATUS_ASSOC_BAD_SUP_CHANNELS	24	/* Association denied because the info
+							 * in the Supported Channel element is
+							 * unacceptable
+							 */
+#define DOT11_STATUS_ASSOC_SHORTSLOT_REQUIRED	25	/* Association denied due to requesting
+							 * station not supporting the Short Slot
+							 * Time option
+							 */
+#define DOT11_STATUS_ASSOC_ERPBCC_REQUIRED	26	/* Association denied due to requesting
+							 * station not supporting the ER-PBCC
+							 * Modulation option
+							 */
+#define DOT11_STATUS_ASSOC_DSSOFDM_REQUIRED	27	/* Association denied due to requesting
+							 * station not supporting the DSS-OFDM
+							 * option
+							 */
+
+/* Info Elts, length of INFORMATION portion of Info Elts */
+#define DOT11_MNG_DS_PARAM_LEN			1	/* d11 management DS parameter length */
+#define DOT11_MNG_IBSS_PARAM_LEN		2	/* d11 management IBSS parameter length */
+
+/* TIM Info element has 3 bytes fixed info in INFORMATION field,
+ * followed by 1 to 251 bytes of Partial Virtual Bitmap
+ */
+#define DOT11_MNG_TIM_FIXED_LEN			3	/* d11 management TIM fixed length */
+#define DOT11_MNG_TIM_DTIM_COUNT		0	/* d11 management DTIM count */
+#define DOT11_MNG_TIM_DTIM_PERIOD		1	/* d11 management DTIM period */
+#define DOT11_MNG_TIM_BITMAP_CTL		2	/* d11 management TIM BITMAP control  */
+#define DOT11_MNG_TIM_PVB			3	/* d11 management TIM PVB */
+
+/* TLV defines */
+#define TLV_TAG_OFF		0	/* tag offset */
+#define TLV_LEN_OFF		1	/* length offset */
+#define TLV_HDR_LEN		2	/* header length */
+#define TLV_BODY_OFF		2	/* body offset */
+
+/* Management Frame Information Element IDs */
+#define DOT11_MNG_SSID_ID			0	/* d11 management SSID id */
+#define DOT11_MNG_RATES_ID			1	/* d11 management rates id */
+#define DOT11_MNG_FH_PARMS_ID			2	/* d11 management FH parameter id */
+#define DOT11_MNG_DS_PARMS_ID			3	/* d11 management DS parameter id */
+#define DOT11_MNG_CF_PARMS_ID			4	/* d11 management CF parameter id */
+#define DOT11_MNG_TIM_ID			5	/* d11 management TIM id */
+#define DOT11_MNG_IBSS_PARMS_ID			6	/* d11 management IBSS parameter id */
+#define DOT11_MNG_COUNTRY_ID			7	/* d11 management country id */
+#define DOT11_MNG_HOPPING_PARMS_ID		8	/* d11 management hopping parameter id */
+#define DOT11_MNG_HOPPING_TABLE_ID		9	/* d11 management hopping table id */
+#define DOT11_MNG_REQUEST_ID			10	/* d11 management request id */
+#define DOT11_MNG_QBSS_LOAD_ID 			11	/* d11 management QBSS Load id */
+#define DOT11_MNG_CHALLENGE_ID			16	/* d11 management chanllenge id */
+#define DOT11_MNG_PWR_CONSTRAINT_ID		32    /* 11H PowerConstraint	*/
+#define DOT11_MNG_PWR_CAP_ID			33    /* 11H PowerCapability	*/
+#define DOT11_MNG_TPC_REQUEST_ID 		34    /* 11H TPC Request	*/
+#define DOT11_MNG_TPC_REPORT_ID			35    /* 11H TPC Report		*/
+#define DOT11_MNG_SUPP_CHANNELS_ID		36    /* 11H Supported Channels	*/
+#define DOT11_MNG_CHANNEL_SWITCH_ID		37    /* 11H ChannelSwitch Announcement */
+#define DOT11_MNG_MEASURE_REQUEST_ID		38    /* 11H MeasurementRequest	*/
+#define DOT11_MNG_MEASURE_REPORT_ID		39    /* 11H MeasurementReport	*/
+#define DOT11_MNG_QUIET_ID			40    /* 11H Quiet		*/
+#define DOT11_MNG_IBSS_DFS_ID			41    /* 11H IBSS_DFS 		*/
+#define DOT11_MNG_ERP_ID			42	/* d11 management ERP id */
+#define DOT11_MNG_TS_DELAY_ID			43	/* d11 management TS Delay id */
+#define DOT11_MNG_NONERP_ID			47	/* d11 management NON-ERP id */
+#define DOT11_MNG_RSN_ID			48	/* d11 management RSN id */
+#define DOT11_MNG_EXT_RATES_ID			50	/* d11 management ext. rates id */
+#define DOT11_MNG_WPA_ID			221	/* d11 management WPA id */
+#define DOT11_MNG_PROPR_ID			221	/* d11 management proprietary id */
+
+/* Rate element Basic flag and rate mask */
+#define DOT11_RATE_BASIC			0x80	/* flag for a Basic Rate */
+#define DOT11_RATE_MASK				0x7F	/* mask for numeric part of rate */
+
+/* ERP info element bit values */
+#define DOT11_MNG_ERP_LEN			1	/* ERP is currently 1 byte long */
+#define DOT11_MNG_NONERP_PRESENT		0x01	/* NonERP (802.11b) STAs are present
+							 *in the BSS
+							 */
+#define DOT11_MNG_USE_PROTECTION		0x02	/* Use protection mechanisms for
+							 *ERP-OFDM frames
+							 */
+#define DOT11_MNG_BARKER_PREAMBLE		0x04	/* Short Preambles: 0 == allowed,
+							 * 1 == not allowed
+							 */
+/* TS Delay element offset & size */
+#define DOT11_MGN_TS_DELAY_LEN		4	/* length of TS DELAY IE */
+#define TS_DELAY_FIELD_SIZE			4	/* TS DELAY field size */
+
+/* Capability Information Field */
+#define DOT11_CAP_ESS				0x0001	/* d11 cap. ESS */
+#define DOT11_CAP_IBSS				0x0002	/* d11 cap. IBSS */
+#define DOT11_CAP_POLLABLE			0x0004	/* d11 cap. pollable */
+#define DOT11_CAP_POLL_RQ			0x0008	/* d11 cap. poll request */
+#define DOT11_CAP_PRIVACY			0x0010	/* d11 cap. privacy */
+#define DOT11_CAP_SHORT				0x0020	/* d11 cap. short */
+#define DOT11_CAP_PBCC				0x0040	/* d11 cap. PBCC */
+#define DOT11_CAP_AGILITY			0x0080	/* d11 cap. agility */
+#define DOT11_CAP_SPECTRUM			0x0100	/* d11 cap. spectrum */
+#define DOT11_CAP_SHORTSLOT			0x0400	/* d11 cap. shortslot */
+#define DOT11_CAP_CCK_OFDM			0x2000	/* d11 cap. CCK/OFDM */
+
+/* Action Frame Constants */
+#define DOT11_ACTION_CAT_ERR_MASK	0x80	/* d11 action category error mask */
+#define DOT11_ACTION_CAT_MASK		0x7F	/* d11 action category mask */
+#define DOT11_ACTION_CAT_SPECT_MNG	0x00	/* d11 action category spectrum management */
+#define DOT11_ACTION_CAT_BLOCKACK	0x03	/* d11 action category block ack */
+#define DOT11_ACTION_NOTIFICATION	0x11	/* 17 */
+
+#define DOT11_ACTION_ID_M_REQ		0	/* d11 action measurement request */
+#define DOT11_ACTION_ID_M_REP		1	/* d11 action measurement response */
+#define DOT11_ACTION_ID_TPC_REQ		2	/* d11 action TPC request */
+#define DOT11_ACTION_ID_TPC_REP		3	/* d11 action TPC response */
+#define DOT11_ACTION_ID_CHANNEL_SWITCH	4		/* d11 action channel switch */
+
+/* HT (EWC) action ids */
+#define DOT11_ACTION_ID_HT_CH_WIDTH	0	/* mimo ps action frame id */
+#define DOT11_ACTION_ID_HT_MIMO_PS	1	/* mimo ps action frame id */
+
+/* Block Ack action types */
+#define DOT11_BA_ACTION_ADDBA_REQ	0	/* ADDBA Req action frame type */
+#define DOT11_BA_ACTION_ADDBA_RESP	1	/* ADDBA Resp action frame type */
+#define DOT11_BA_ACTION_DELBA		2	/* DELBA action frame type */
+
+/* ADDBA action parameters */
+#define DOT11_ADDBA_PARAM_POLICY_MASK	0x0002	/* policy mask(ack vs delayed) */
+#define DOT11_ADDBA_PARAM_POLICY_SHIFT	1	/* policy shift */
+#define DOT11_ADDBA_PARAM_TID_MASK	0x003c	/* tid mask */
+#define DOT11_ADDBA_PARAM_TID_SHIFT	2	/* tid shift */
+#define DOT11_ADDBA_PARAM_BSIZE_MASK	0xffc0	/* buffer size mask */
+#define DOT11_ADDBA_PARAM_BSIZE_SHIFT	6	/* buffer size shift */
+
+#define DOT11_ADDBA_POLICY_DELAYED	0	/* delayed BA policy */
+#define DOT11_ADDBA_POLICY_IMMEDIATE	1	/* immediate BA policy */
+
+struct dot11_addba_req {
+	uint8 category;				/* category of action frame (3) */
+	uint8 action;				/* action: addba req */
+	uint8 token;				/* identifier */
+	uint16 addba_param_set;			/* parameter set */
+	uint16 timeout;				/* timeout in seconds */
+	uint16 start_seqnum;			/* starting sequence number */
+}PACKED;
+typedef struct dot11_addba_req dot11_addba_req_t;
+#define DOT11_ADDBA_REQ_LEN		9	/* length of addba req frame */
+
+struct dot11_addba_resp {
+	uint8 category;				/* category of action frame (3) */
+	uint8 action;				/* action: addba resp */
+	uint8 token;				/* identifier */
+	uint16 status;				/* status of add request */
+	uint16 addba_param_set;			/* negotiated parameter set */
+	uint16 timeout;				/* negotiated timeout in seconds */
+}PACKED;
+typedef struct dot11_addba_resp dot11_addba_resp_t;
+#define DOT11_ADDBA_RESP_LEN		9	/* length of addba resp frame */
+
+/* DELBA action parameters */
+#define DOT11_DELBA_PARAM_INIT_MASK	0x0800	/* initiator mask */
+#define DOT11_DELBA_PARAM_INIT_SHIFT	11	/* initiator shift */
+#define DOT11_DELBA_PARAM_TID_MASK	0xf000	/* tid mask */
+#define DOT11_DELBA_PARAM_TID_SHIFT	12	/* tid shift */
+
+struct dot11_delba {
+	uint8 category;				/* category of action frame (3) */
+	uint8 action;				/* action: addba req */
+	uint16 delba_param_set;			/* paarmeter set */
+	uint16 reason;				/* reason for dellba */
+}PACKED;
+typedef struct dot11_delba dot11_delba_t;
+#define DOT11_DELBA_LEN			6	/* length of delba frame */
+
+/* MLME Enumerations */
+#define DOT11_BSSTYPE_INFRASTRUCTURE		0	/* d11 infrastructure */
+#define DOT11_BSSTYPE_INDEPENDENT		1	/* d11 independent */
+#define DOT11_BSSTYPE_ANY			2	/* d11 any BSS type */
+#define DOT11_SCANTYPE_ACTIVE			0	/* d11 scan active */
+#define DOT11_SCANTYPE_PASSIVE			1	/* d11 scan passive */
+
+/* 802.11 BRCM "Compromise" Pre N constants */
+#define PREN_PREAMBLE		24	/* green field preamble time */
+#define PREN_MM_EXT		16	/* extra mixed mode preamble time */
+#define PREN_PREAMBLE_EXT	4	/* extra preamble (multiply by unique_streams-1) */
+
+/* 802.11 A PHY constants */
+#define APHY_SLOT_TIME		9	/* APHY slot time */
+#define APHY_SIFS_TIME		16	/* APHY SIFS time */
+#define APHY_DIFS_TIME		(APHY_SIFS_TIME + (2 * APHY_SLOT_TIME))	/* APHY DIFS time */
+#define APHY_PREAMBLE_TIME	16	/* APHY preamble time */
+#define APHY_SIGNAL_TIME	4	/* APHY signal time */
+#define APHY_SYMBOL_TIME	4	/* APHY symbol time */
+#define APHY_SERVICE_NBITS	16	/* APHY service nbits */
+#define APHY_TAIL_NBITS		6	/* APHY tail nbits */
+#define	APHY_CWMIN		15	/* APHY cwmin */
+
+/* 802.11 B PHY constants */
+#define BPHY_SLOT_TIME		20	/* BPHY slot time */
+#define BPHY_SIFS_TIME		10	/* BPHY SIFS time */
+#define BPHY_DIFS_TIME		50	/* BPHY DIFS time */
+#define BPHY_PLCP_TIME		192	/* BPHY PLCP time */
+#define BPHY_PLCP_SHORT_TIME	96	/* BPHY PLCP short time */
+#define	BPHY_CWMIN		31	/* BPHY cwmin */
+
+/* 802.11 G constants */
+#define DOT11_OFDM_SIGNAL_EXTENSION	6	/* d11 OFDM signal extension */
+
+#define PHY_CWMAX		1023	/* PHY cwmax */
+
+#define	DOT11_MAXNUMFRAGS	16	/* max # fragments per MSDU */
+
+/* dot11Counters Table - 802.11 spec., Annex D */
+typedef struct d11cnt {
+	uint32		txfrag;		/* dot11TransmittedFragmentCount */
+	uint32		txmulti;	/* dot11MulticastTransmittedFrameCount */
+	uint32		txfail;		/* dot11FailedCount */
+	uint32		txretry;	/* dot11RetryCount */
+	uint32		txretrie;	/* dot11MultipleRetryCount */
+	uint32		rxdup;		/* dot11FrameduplicateCount */
+	uint32		txrts;		/* dot11RTSSuccessCount */
+	uint32		txnocts;	/* dot11RTSFailureCount */
+	uint32		txnoack;	/* dot11ACKFailureCount */
+	uint32		rxfrag;		/* dot11ReceivedFragmentCount */
+	uint32		rxmulti;	/* dot11MulticastReceivedFrameCount */
+	uint32		rxcrc;		/* dot11FCSErrorCount */
+	uint32		txfrmsnt;	/* dot11TransmittedFrameCount */
+	uint32		rxundec;	/* dot11WEPUndecryptableCount */
+} d11cnt_t;
+
+/* BRCM OUI */
+#define BRCM_OUI		"\x00\x10\x18"	/* Broadcom OUI */
+
+/* OUI for BRCM proprietary IE */
+#define BRCM_PROP_OUI		"\x00\x90\x4C"	/* Broadcom proprietary OUI */
+
+/* BRCM info element */
+struct brcm_ie {
+	uint8	id;		/* IE ID, 221, DOT11_MNG_PROPR_ID */
+	uint8	len;		/* IE length */
+	uint8	oui[3];		/* Proprietary OUI, BRCM_OUI */
+	uint8	ver;		/* type/ver of this IE */
+	uint8	assoc;		/* # of assoc STAs */
+	uint8	flags;		/* misc flags */
+	uint8	flags1;		/* misc flags */
+	uint16	amsdu_mtu_pref;	/* preferred A-MSDU MTU */
+} PACKED;
+typedef	struct brcm_ie brcm_ie_t;
+#define BRCM_IE_LEN		11	/* BRCM IE length */
+#define BRCM_IE_VER		2	/* BRCM IE version */
+#define BRCM_IE_LEGACY_AES_VER	1	/* BRCM IE legacy AES version */
+
+/* brcm_ie flags */
+#define	BRF_ABCAP		0x1	/* afterburner capable */
+#define	BRF_ABRQRD		0x2	/* afterburner requested */
+#define	BRF_LZWDS		0x4	/* lazy wds enabled */
+#define	BRF_BLOCKACK		0x8	/* BlockACK capable */
+#define BRF_ABCOUNTER_MASK	0xf0	/* afterburner wds "state" counter */
+#define BRF_ABCOUNTER_SHIFT	4	/* offset of afterburner wds "state" counter */
+
+/* brcm_ie flags1 */
+#define	BRF1_AMSDU		0x1	/* A-MSDU capable */
+
+#define AB_WDS_TIMEOUT_MAX	15	/* afterburner wds Max count indicating not
+					 * locally capable
+					 */
+#define AB_WDS_TIMEOUT_MIN	1	/* afterburner wds, use zero count as indicating
+					 * "downrev"
+					 */
+
+/* EWC definitions */
+#define MCSSET_LEN	16	/* 16-bits per 8-bit set to give 128-bits bitmap of MCS Index */
+
+struct ewc_cap {
+	uint16	cap;
+	uint8	params;
+	uint8	supp_mcs[MCSSET_LEN];
+	uint16	ext_htcap;
+	uint32	txbf_cap;
+	uint8	as_cap;
+} PACKED;
+typedef struct ewc_cap ewc_cap_t;
+
+/* CAP IE: EWC 1.0 spec. simply stole a 802.11 IE, we use our prop. IE until this is resolved */
+/* the capability IE is primarily used to convey this nodes abilities */
+struct ewc_cap_ie {
+	uint8	id;		/* IE ID, 221, DOT11_MNG_PROPR_ID */
+	uint8	len;		/* IE length */
+	uint8	oui[3];		/* Proprietary OUI, BRCM_PROP_OUI */
+	uint8	type;           /* type inidicates what follows */
+	ewc_cap_t cap;
+} PACKED;
+typedef struct ewc_cap_ie ewc_cap_ie_t;
+
+#define EWC_CAP_IE_LEN	(26+4)	
+#define EWC_CAP_IE_TYPE	51      
+
+#define EWC_CAP_ADC_CODING	0x0001	/* Advance coding support */
+#define EWC_CAP_40MHZ		0x0002  /* FALSE:20Mhz, TRUE: 20 and 40MHZ supported */
+#define EWC_CAP_MIMO_PS_MASK	0x000C  /* Mimo PS mask */
+#define EWC_CAP_MIMO_PS_SHIFT	0x0002	/* Mimo PS shift */
+#define EWC_CAP_MIMO_PS_OFF	0x0003	/* Mimo PS, no restriction */
+#define EWC_CAP_MIMO_PS_RTS	0x0001	/* Mimo PS, send RTS/CTS around MIMO frames */
+#define EWC_CAP_MIMO_PS_ON	0x0000	/* Mimo PS, MIMO disallowed */
+#define EWC_CAP_GF		0x0010	/* Greenfield preamble support */
+#define EWC_CAP_SHORT_GI_20	0x0020	/* 20MHZ short guard interval support */
+#define EWC_CAP_SHORT_GI_40	0x0040	/* 40Mhz short guard interval support */
+#define EWC_CAP_TX_STBC		0x0080	/* Tx STBC support */
+#define EWC_CAP_RX_STBC_MASK	0x0300	/* Rx STBC mask */
+#define EWC_CAP_RX_STBC_SHIFT	8	/* Rx STBC shift */
+#define EWC_CAP_DELAYED_BA	0x0400	/* delayed BA support */
+#define EWC_CAP_MAX_AMSDU	0x0800	/* Max AMSDU size in bytes , 0=3839, 1=7935 */
+#define EWC_CAP_DSSS_CCK	0x1000	/* DSSS/CCK supported by the BSS */
+#define EWC_CAP_PSMP		0x2000	/* Power Save Multi Poll support */
+#define EWC_CAP_STBC_CTL	0x4000	/* STBC control frame support */
+#define EWC_CAP_LSIG_TXOP	0x8000	/* L-SIG TXOP protection support */
+
+#define EWC_MAX_AMSDU		7935	/* max amsdu size (bytes) per the EWC spec */
+#define EWC_MIN_AMSDU		3835	/* min amsdu size (bytes) per the EWC spec */
+
+#define EWC_PARAMS_RX_FACTOR_MASK	0x03	/* ampdu rcv factor mask */
+#define EWC_PARAMS_DENSITY_MASK		0x1C	/* ampdu density mask */
+#define EWC_PARAMS_DENSITY_SHIFT	2	/* ampdu density shift */
+
+/* EWC/AMPDU specific define */
+#define AMPDU_MAX_MPDU_DENSITY	7	/* max mpdu density; in 1/8 usec units */
+#define AMPDU_MAX_RX_FACTOR	3	/* max rcv ampdu len (64kb) */
+#define AMPDU_RX_FACTOR_BASE	8*1024	/* ampdu factor base for rx len */
+#define AMPDU_DELIMITER_LEN	4	/* length of ampdu delimiter */
+
+struct ewc_add {
+	uint8	ctl_ch;			/* control channel number */
+	uint8	byte1;			/* ext ch,rec. ch. width, RIFS support */
+	uint16	opmode;			/* operation mode */
+	uint16	misc_bits;		/* misc bits */
+	uint8	basic_mcs[MCSSET_LEN];  /* required MCS set */
+} PACKED;
+typedef struct ewc_add ewc_add_t;
+
+/* ADD IE: EWC 1.0 spec. simply stole a 802.11 IE, we use our prop. IE until this is resolved */
+/* the additional IE is primarily used to convey the current BSS configuration */
+struct ewc_add_ie {
+	uint8	id;		/* IE ID, 221, DOT11_MNG_PROPR_ID */
+	uint8	len;		/* IE length */
+	uint8	oui[3];		/* Proprietary OUI, BRCM_PROP_OUI */
+	uint8	type;		/* indicates what follows */
+	ewc_add_t add;
+} PACKED;
+typedef struct ewc_add_ie ewc_add_ie_t;
+
+#define EWC_ADD_IE_LEN	(22+4)	
+#define EWC_ADD_IE_TYPE	52	
+
+/* byte1 defn's */
+#define EWC_EXT_CH_MASK		0x03	/* extension channel mask */
+#define EWC_EXT_CH_UPPER	0x01	/* ext. ch. on upper sb */
+#define EWC_EXT_CH_LOWER	0x03	/* ext. ch. on lower sb */
+#define EWC_EXT_CH_NONE		0x00	/* extension channel mask */
+#define EWC_BW_ANY		0x04	/* set, STA can use 20 or 40MHz */
+#define EWC_RIFS_PERMITTED     	0x08	/* RIFS allowed */
+
+/* opmode defn's */
+#define EWC_OPMODE_MASK		0x0003	/* protection mode mask */
+#define EWC_OPMODE_PURE		0x0000	/* protection mode PURE */
+#define EWC_OPMODE_HT20IN40	0x0002	/* protection mode 20MHz HT in 40MHz BSS */
+#define EWC_OPMODE_MIXED	0x0003	/* protection mode Mixed Mode */
+#define EWC_NONGF_PRESENT	0x0004	/* protection mode non-GF */
+
+/* misc_bites defn's */
+#define EWC_BASIC_STBC_MCS	0x007f	/* basic STBC MCS */
+#define EWC_DUAL_STBC_PROT	0x0080	/* Dual STBC Protection */
+#define EWC_SECOND_BCN		0x0100	/* Secondary beacon support */
+#define EWC_LSIG_TXOP		0x0200	/* L-SIG TXOP Protection full support */
+#define EWC_PCO_ACTIVE		0x0400	/* PCO active */
+#define EWC_PCO_PHASE		0x0800	/* PCO phase */
+
+/* Macros for opmode */
+#define EWC_MIXEDMODE_PRESENT(add) ((ltoh16_ua(&add.opmode) & EWC_OPMODE_MASK) \
+				   == EWC_OPMODE_MIXED)	/* mixed mode present */
+#define EWC_HT20_PRESENT(add)	((ltoh16_ua(&add.opmode) & EWC_OPMODE_MASK) \
+				== EWC_OPMODE_HT20IN40)	/* 20MHz HT present */
+#define EWC_USE_PROTECTION(add) (EWC_HT20_PRESENT((add)) || \
+				EWC_MIXEDMODE_PRESENT((add)))	/* use protection */
+
+/* Vendor IE structure */
+struct vndr_ie {
+	uchar id;
+	uchar len;
+	uchar oui [3];
+	uchar data [1]; 	/* Variable size data */
+}PACKED;
+typedef struct vndr_ie vndr_ie_t;
+
+#define VNDR_IE_HDR_LEN		2	/* id + len field */
+#define VNDR_IE_MIN_LEN		3	/* size of the oui field */
+#define VNDR_IE_MAX_LEN		256	/* verdor IE max length */
+
+/* WPA definitions */
+#define WPA_VERSION		1	/* WPA version */
+#define WPA_OUI			"\x00\x50\xF2"	/* WPA OUI */
+
+#define WPA2_VERSION		1	/* WPA2 version */
+#define WPA2_VERSION_LEN	2	/* WAP2 version length */
+#define WPA2_OUI		"\x00\x0F\xAC"	/* WPA2 OUI */
+
+#define WPA_OUI_LEN	3	/* WPA OUI length */
+
+/* RSN authenticated key managment suite */
+#define RSN_AKM_NONE		0	/* None (IBSS) */
+#define RSN_AKM_UNSPECIFIED	1	/* Over 802.1x */
+#define RSN_AKM_PSK		2	/* Pre-shared Key */
+
+/* Key related defines */
+#define DOT11_MAX_DEFAULT_KEYS	4	/* number of default keys */
+#define DOT11_MAX_KEY_SIZE	32	/* max size of any key */
+#define DOT11_MAX_IV_SIZE	16	/* max size of any IV */
+#define DOT11_EXT_IV_FLAG	(1<<5)	/* flag to indicate IV is > 4 bytes */
+
+#define WEP1_KEY_SIZE		5	/* max size of any WEP key */
+#define WEP1_KEY_HEX_SIZE	10	/* size of WEP key in hex. */
+#define WEP128_KEY_SIZE		13	/* max size of any WEP key */
+#define WEP128_KEY_HEX_SIZE	26	/* size of WEP key in hex. */
+#define TKIP_MIC_SIZE		8	/* size of TKIP MIC */
+#define TKIP_EOM_SIZE		7	/* max size of TKIP EOM */
+#define TKIP_EOM_FLAG		0x5a	/* TKIP EOM flag byte */
+#define TKIP_KEY_SIZE		32	/* size of any TKIP key */
+#define TKIP_MIC_AUTH_TX	16	/* offset to Authenticator MIC TX key */
+#define TKIP_MIC_AUTH_RX	24	/* offset to Authenticator MIC RX key */
+#define TKIP_MIC_SUP_RX		TKIP_MIC_AUTH_TX	/* offset to Supplicant MIC RX key */
+#define TKIP_MIC_SUP_TX		TKIP_MIC_AUTH_RX	/* offset to Supplicant MIC TX key */
+#define AES_KEY_SIZE		16	/* size of AES key */
+
+#undef PACKED
+#if !defined(__GNUC__)
+#pragma pack()
+#endif
+
+#endif /* _802_11_H_ */
diff --git a/package/broadcom-wl/src/include/proto/bcmeth.h b/package/broadcom-wl/src/include/proto/bcmeth.h
new file mode 100644
index 000000000..7b3295389
--- /dev/null
+++ b/package/broadcom-wl/src/include/proto/bcmeth.h
@@ -0,0 +1,101 @@
+/*
+ * Broadcom Ethernettype  protocol definitions
+ *
+ * Copyright 2006, Broadcom Corporation
+ * All Rights Reserved.
+ * 
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ *
+ * $Id: bcmeth.h,v 1.1.1.4 2006/02/27 03:43:16 honor Exp $
+ */
+
+/*
+ * Broadcom Ethernet protocol defines
+ */
+
+#ifndef _BCMETH_H_
+#define _BCMETH_H_
+
+/* enable structure packing */
+#if defined(__GNUC__)
+#define	PACKED	__attribute__((packed))
+#else
+#pragma pack(1)
+#define	PACKED
+#endif
+
+/* ETHER_TYPE_BRCM is defined in ethernet.h */
+
+/*
+ * Following the 2byte BRCM ether_type is a 16bit BRCM subtype field
+ * in one of two formats: (only subtypes 32768-65535 are in use now)
+ *
+ * subtypes 0-32767:
+ *     8 bit subtype (0-127)
+ *     8 bit length in bytes (0-255)
+ *
+ * subtypes 32768-65535:
+ *     16 bit big-endian subtype
+ *     16 bit big-endian length in bytes (0-65535)
+ *
+ * length is the number of additional bytes beyond the 4 or 6 byte header
+ *
+ * Reserved values:
+ * 0 reserved
+ * 5-15 reserved for iLine protocol assignments
+ * 17-126 reserved, assignable
+ * 127 reserved
+ * 32768 reserved
+ * 32769-65534 reserved, assignable
+ * 65535 reserved
+ */
+
+/* 
+ * While adding the subtypes and their specific processing code make sure
+ * bcmeth_bcm_hdr_t is the first data structure in the user specific data structure definition
+ */
+
+#define	BCMILCP_SUBTYPE_RATE		1
+#define	BCMILCP_SUBTYPE_LINK		2
+#define	BCMILCP_SUBTYPE_CSA		3
+#define	BCMILCP_SUBTYPE_LARQ		4
+#define BCMILCP_SUBTYPE_VENDOR		5
+#define	BCMILCP_SUBTYPE_FLH		17
+
+#define BCMILCP_SUBTYPE_VENDOR_LONG	32769
+#define BCMILCP_SUBTYPE_CERT		32770
+#define BCMILCP_SUBTYPE_SES		32771
+
+
+#define BCMILCP_BCM_SUBTYPE_RESERVED	0
+#define BCMILCP_BCM_SUBTYPE_EVENT		1
+#define BCMILCP_BCM_SUBTYPE_SES			2
+/*
+ * The EAPOL type is not used anymore. Instead EAPOL messages are now embedded
+ * within BCMILCP_BCM_SUBTYPE_EVENT type messages
+ */
+/* #define BCMILCP_BCM_SUBTYPE_EAPOL		3 */
+
+#define BCMILCP_BCM_SUBTYPEHDR_MINLENGTH	8
+#define BCMILCP_BCM_SUBTYPEHDR_VERSION		0
+
+/* These fields are stored in network order */
+typedef  struct bcmeth_hdr
+{
+	uint16	subtype;	/* Vendor specific..32769 */
+	uint16	length;
+	uint8	version;	/* Version is 0 */
+	uint8	oui[3];		/* Broadcom OUI */
+	/* user specific Data */
+	uint16	usr_subtype;
+} PACKED bcmeth_hdr_t;
+
+#undef PACKED
+#if !defined(__GNUC__)
+#pragma pack()
+#endif
+
+#endif	/*  _BCMETH_H_ */
diff --git a/package/broadcom-wl/src/include/proto/bcmevent.h b/package/broadcom-wl/src/include/proto/bcmevent.h
new file mode 100644
index 000000000..d922a5d21
--- /dev/null
+++ b/package/broadcom-wl/src/include/proto/bcmevent.h
@@ -0,0 +1,152 @@
+/*
+ * Broadcom Event  protocol definitions
+ *
+ * Copyright 2006, Broadcom Corporation
+ * All Rights Reserved.
+ * 
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ *
+ *
+ * Dependencies: proto/bcmeth.h
+ *
+ * $Id: bcmevent.h,v 1.1.1.3 2006/02/27 03:43:16 honor Exp $
+ *
+ */
+
+/*
+ * Broadcom Ethernet Events protocol defines
+ *
+ */
+
+#ifndef _BCMEVENT_H_
+#define _BCMEVENT_H_
+
+/* enable structure packing */
+#if defined(__GNUC__)
+#define	PACKED	__attribute__((packed))
+#else
+#pragma pack(1)
+#define	PACKED
+#endif /* defined(__GNUC__) */
+
+#define BCM_EVENT_MSG_VERSION		1	/* wl_event_msg_t struct version */
+#define BCM_MSG_IFNAME_MAX		16	/* max length of interface name */
+
+/* flags */
+#define WLC_EVENT_MSG_LINK		0x01	/* link is up */
+#define WLC_EVENT_MSG_FLUSHTXQ		0x02	/* flush tx queue on MIC error */
+#define WLC_EVENT_MSG_GROUP		0x04	/* group MIC error */
+
+/* theses fields are stored in network order */
+typedef struct
+{
+	uint16	version;
+	uint16	flags;			/* see flags below */
+	uint32	event_type;		/* Message (see below) */
+	uint32	status;			/* Status code (see below) */
+	uint32	reason;			/* Reason code (if applicable) */
+	uint32	auth_type;		/* WLC_E_AUTH */
+	uint32	datalen;		/* data buf */
+	struct ether_addr	addr;	/* Station address (if applicable) */
+	char	ifname[BCM_MSG_IFNAME_MAX]; /* name of the packet incoming interface */
+} PACKED wl_event_msg_t;
+
+/* used by driver msgs */
+typedef struct bcm_event {
+	struct ether_header eth;
+	bcmeth_hdr_t		bcm_hdr;
+	wl_event_msg_t		event;
+	/* data portion follows */
+} PACKED bcm_event_t;
+
+#define BCM_MSG_LEN	(sizeof(bcm_event_t) - sizeof(bcmeth_hdr_t) - sizeof(struct ether_header))
+
+/* Event messages */
+#define WLC_E_SET_SSID		0	/* indicates status of set SSID */
+#define WLC_E_JOIN		1	/* differentiates join IBSS from found (WLC_E_START) IBSS */
+#define WLC_E_START		2	/* STA founded an IBSS or AP started a BSS */
+#define WLC_E_AUTH		3	/* 802.11 AUTH request */
+#define WLC_E_AUTH_IND		4	/* 802.11 AUTH indication */
+#define WLC_E_DEAUTH		5	/* 802.11 DEAUTH request */
+#define WLC_E_DEAUTH_IND	6	/* 802.11 DEAUTH indication */
+#define WLC_E_ASSOC		7	/* 802.11 ASSOC request */
+#define WLC_E_ASSOC_IND		8	/* 802.11 ASSOC indication */
+#define WLC_E_REASSOC		9	/* 802.11 REASSOC request */
+#define WLC_E_REASSOC_IND	10	/* 802.11 REASSOC indication */
+#define WLC_E_DISASSOC		11	/* 802.11 DISASSOC request */
+#define WLC_E_DISASSOC_IND	12	/* 802.11 DISASSOC indication */
+#define WLC_E_QUIET_START	13	/* 802.11h Quiet period started */
+#define WLC_E_QUIET_END		14	/* 802.11h Quiet period ended */
+#define WLC_E_BEACON_RX		15	/* BEACONS received/lost indication */
+#define WLC_E_LINK		16	/* generic link indication */
+#define WLC_E_MIC_ERROR		17	/* TKIP MIC error occurred */
+#define WLC_E_NDIS_LINK		18	/* NDIS style link indication */
+#define WLC_E_ROAM		19	/* roam attempt occurred: indicate status & reason */
+#define WLC_E_TXFAIL		20	/* change in dot11FailedCount (txfail) */
+#define WLC_E_PMKID_CACHE	21	/* WPA2 pmkid cache indication */
+#define WLC_E_RETROGRADE_TSF	22	/* current AP's TSF value went backward */
+#define WLC_E_PRUNE		23	/* AP was pruned from join list for reason */
+#define WLC_E_AUTOAUTH		24	/* report AutoAuth table entry match for join attempt */
+#define WLC_E_EAPOL_MSG		25	/* Event encapsulating an EAPOL message */
+#define WLC_E_SCAN_COMPLETE	26	/* Scan results are ready or scan was aborted */
+#define WLC_E_ADDTS_IND		27	/* indicate to host addts fail/success */
+#define WLC_E_DELTS_IND		28	/* indicate to host delts fail/success */
+#define WLC_E_BCNSENT_IND	29	/* indicate to host of beacon transmit */
+#define WLC_E_BCNRX_MSG		30	/* Send the received beacon up to the host */
+#define WLC_E_LAST		31	/* highest val + 1 for range checking */
+
+/* Event status codes */
+#define WLC_E_STATUS_SUCCESS		0	/* operation was successful */
+#define WLC_E_STATUS_FAIL		1	/* operation failed */
+#define WLC_E_STATUS_TIMEOUT		2	/* operation timed out */
+#define WLC_E_STATUS_NO_NETWORKS	3	/* failed due to no matching network found */
+#define WLC_E_STATUS_ABORT		4	/* operation was aborted */
+#define WLC_E_STATUS_NO_ACK		5	/* protocol failure: packet not ack'd */
+#define WLC_E_STATUS_UNSOLICITED	6	/* AUTH or ASSOC packet was unsolicited */
+#define WLC_E_STATUS_ATTEMPT		7	/* attempt to assoc to an auto auth configuration */
+
+/* roam reason codes */
+#define WLC_E_REASON_INITIAL_ASSOC	0	/* initial assoc */
+#define WLC_E_REASON_LOW_RSSI		1	/* roamed due to low RSSI */
+#define WLC_E_REASON_DEAUTH		2	/* roamed due to DEAUTH indication */
+#define WLC_E_REASON_DISASSOC		3	/* roamed due to DISASSOC indication */
+#define WLC_E_REASON_BCNS_LOST		4	/* roamed due to lost beacons */
+#define WLC_E_REASON_FAST_ROAM_FAILED	5	/* roamed due to fast roam failure */
+#define WLC_E_REASON_DIRECTED_ROAM	6	/* roamed due to request by AP */
+#define WLC_E_REASON_TSPEC_REJECTED	7	/* roamed due to TSPEC rejection */
+#define WLC_E_REASON_BETTER_AP		8	/* roamed due to finding better AP */
+
+/* prune reason codes */
+#define WLC_E_PRUNE_ENCR_MISMATCH	1	/* ecryption mismatch */
+#define WLC_E_PRUNE_BCAST_BSSID		2	/* AP uses a broadcast BSSID */
+#define WLC_E_PRUNE_MAC_DENY		3	/* STA's MAC addr is in AP's MAC deny list */
+#define WLC_E_PRUNE_MAC_NA		4	/* STA's MAC addr is not in AP's MAC allow list */
+#define WLC_E_PRUNE_REG_PASSV		5	/* AP not allowed due to regulatory restriction */
+#define WLC_E_PRUNE_SPCT_MGMT		6	/* AP does not support STA locale spectrum mgmt */
+#define WLC_E_PRUNE_RADAR		7	/* AP is on a radar channel of STA locale */
+#define WLC_E_RSN_MISMATCH		8	/* STA does not support AP's RSN */
+#define WLC_E_PRUNE_NO_COMMON_RATES	9	/* No rates in common with AP */
+#define WLC_E_PRUNE_BASIC_RATES		10	/* STA does not support all basic rates of BSS */
+#define WLC_E_PRUNE_CCXFAST_PREVAP	11	/* CCX FAST ROAM: prune previous AP */
+#define WLC_E_PRUNE_CIPHER_NA		12	/* BSS's cipher not supported */
+#define WLC_E_PRUNE_KNOWN_STA		13	/* AP is already known to us as a STA */
+#define WLC_E_PRUNE_CCXFAST_DROAM	14	/* CCX FAST ROAM: prune unqulified AP */
+#define WLC_E_PRUNE_WDS_PEER		15	/* AP is already known to us as a WDS peer */
+#define WLC_E_PRUNE_QBSS_LOAD		16	/* QBSS LOAD - AAC is too low */
+#define WLC_E_PRUNE_HOME_AP		17	/* prune home AP */
+
+/* WLC_SET_CALLBACK data type */
+typedef struct wlc_event_cb {
+	void (*fn)(void *, bcm_event_t *);	/* Callback function */
+	void *context;				/* Passed to callback function */
+} wlc_event_cb_t;
+
+#undef PACKED
+#if !defined(__GNUC__)
+#pragma pack()
+#endif /* PACKED */
+
+#endif /* _BCMEVENT_H_ */
diff --git a/package/broadcom-wl/src/include/proto/ethernet.h b/package/broadcom-wl/src/include/proto/ethernet.h
new file mode 100644
index 000000000..ced65b696
--- /dev/null
+++ b/package/broadcom-wl/src/include/proto/ethernet.h
@@ -0,0 +1,165 @@
+/*
+ * From FreeBSD 2.2.7: Fundamental constants relating to ethernet.
+ *
+ * Copyright 2006, Broadcom Corporation
+ * All Rights Reserved.
+ * 
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ *
+ * $Id: ethernet.h,v 1.1.1.14 2006/02/27 03:43:16 honor Exp $
+ */
+
+#ifndef __NET_ETHERNET_H
+#define __NET_ETHERNET_H
+
+#ifndef _TYPEDEFS_H_
+#include "typedefs.h"
+#endif
+
+/* enable structure packing */
+#if defined(__GNUC__)
+#define	PACKED	__attribute__((packed))
+#else
+#pragma pack(1)
+#define	PACKED
+#endif
+
+/*
+ * The number of bytes in an ethernet (MAC) address.
+ */
+#define	ETHER_ADDR_LEN		6
+
+/*
+ * The number of bytes in the type field.
+ */
+#define	ETHER_TYPE_LEN		2
+
+/*
+ * The number of bytes in the trailing CRC field.
+ */
+#define	ETHER_CRC_LEN		4
+
+/*
+ * The length of the combined header.
+ */
+#define	ETHER_HDR_LEN		(ETHER_ADDR_LEN*2+ETHER_TYPE_LEN)
+
+/*
+ * The minimum packet length.
+ */
+#define	ETHER_MIN_LEN		64
+
+/*
+ * The minimum packet user data length.
+ */
+#define	ETHER_MIN_DATA		46
+
+/*
+ * The maximum packet length.
+ */
+#define	ETHER_MAX_LEN		1518
+
+/*
+ * The maximum packet user data length.
+ */
+#define	ETHER_MAX_DATA		1500
+
+/* ether types */
+#define	ETHER_TYPE_IP		0x0800		/* IP */
+#define ETHER_TYPE_ARP		0x0806		/* ARP */
+#define ETHER_TYPE_8021Q	0x8100		/* 802.1Q */
+#define	ETHER_TYPE_BRCM		0x886c		/* Broadcom Corp. */
+#define	ETHER_TYPE_802_1X	0x888e		/* 802.1x */
+#ifdef BCMWPA2
+#define	ETHER_TYPE_802_1X_PREAUTH 0x88c7	/* 802.1x preauthentication */
+#endif
+
+/* Broadcom subtype follows ethertype;  First 2 bytes are reserved; Next 2 are subtype; */
+#define	ETHER_BRCM_SUBTYPE_LEN	4		/* Broadcom 4 byte subtype */
+#define	ETHER_BRCM_CRAM		0x1		/* Broadcom subtype cram protocol */
+
+/* ether header */
+#define ETHER_DEST_OFFSET	0		/* dest address offset */
+#define ETHER_SRC_OFFSET	6		/* src address offset */
+#define ETHER_TYPE_OFFSET	12		/* ether type offset */
+
+/*
+ * A macro to validate a length with
+ */
+#define	ETHER_IS_VALID_LEN(foo)	\
+	((foo) >= ETHER_MIN_LEN && (foo) <= ETHER_MAX_LEN)
+
+
+#ifndef __INCif_etherh     /* Quick and ugly hack for VxWorks */
+/*
+ * Structure of a 10Mb/s Ethernet header.
+ */
+struct	ether_header {
+	uint8	ether_dhost[ETHER_ADDR_LEN];
+	uint8	ether_shost[ETHER_ADDR_LEN];
+	uint16	ether_type;
+} PACKED;
+
+/*
+ * Structure of a 48-bit Ethernet address.
+ */
+struct	ether_addr {
+	uint8 octet[ETHER_ADDR_LEN];
+} PACKED;
+#endif	/* !__INCif_etherh Quick and ugly hack for VxWorks */
+
+/*
+ * Takes a pointer, sets locally admininistered
+ * address bit in the 48-bit Ethernet address.
+ */
+#define ETHER_SET_LOCALADDR(ea)	(((uint8 *)(ea))[0] = (((uint8 *)(ea))[0] | 2))
+
+/*
+ * Takes a pointer, returns true if a 48-bit multicast address
+ * (including broadcast, since it is all ones)
+ */
+#define ETHER_ISMULTI(ea) (((uint8 *)(ea))[0] & 1)
+
+
+/* compare two ethernet addresses - assumes the pointers can be referenced as shorts */
+#define	ether_cmp(a, b)	(!(((short*)a)[0] == ((short*)b)[0]) | \
+			 !(((short*)a)[1] == ((short*)b)[1]) | \
+			 !(((short*)a)[2] == ((short*)b)[2]))
+
+/* copy an ethernet address - assumes the pointers can be referenced as shorts */
+#define	ether_copy(s, d) { \
+		((short*)d)[0] = ((short*)s)[0]; \
+		((short*)d)[1] = ((short*)s)[1]; \
+		((short*)d)[2] = ((short*)s)[2]; }
+
+/*
+ * Takes a pointer, returns true if a 48-bit broadcast (all ones)
+ */
+#define ETHER_ISBCAST(ea) ((((uint8 *)(ea))[0] &		\
+			    ((uint8 *)(ea))[1] &		\
+			    ((uint8 *)(ea))[2] &		\
+			    ((uint8 *)(ea))[3] &		\
+			    ((uint8 *)(ea))[4] &		\
+			    ((uint8 *)(ea))[5]) == 0xff)
+
+static const struct ether_addr ether_bcast = {{255, 255, 255, 255, 255, 255}};
+
+/*
+ * Takes a pointer, returns true if a 48-bit null address (all zeros)
+ */
+#define ETHER_ISNULLADDR(ea) ((((uint8 *)(ea))[0] |		\
+			    ((uint8 *)(ea))[1] |		\
+			    ((uint8 *)(ea))[2] |		\
+			    ((uint8 *)(ea))[3] |		\
+			    ((uint8 *)(ea))[4] |		\
+			    ((uint8 *)(ea))[5]) == 0)
+
+#undef PACKED
+#if !defined(__GNUC__)
+#pragma pack()
+#endif
+
+#endif /* __NET_ETHERNET_H */
diff --git a/package/broadcom-wl/src/include/proto/wpa.h b/package/broadcom-wl/src/include/proto/wpa.h
new file mode 100644
index 000000000..dd35dbef0
--- /dev/null
+++ b/package/broadcom-wl/src/include/proto/wpa.h
@@ -0,0 +1,148 @@
+/*
+ * Fundamental types and constants relating to WPA
+ *
+ * Copyright 2006, Broadcom Corporation
+ * All Rights Reserved.
+ * 
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ *
+ * $Id: wpa.h,v 1.1.1.4 2006/02/27 03:43:16 honor Exp $
+ */
+
+#ifndef _proto_wpa_h_
+#define _proto_wpa_h_
+
+#include <typedefs.h>
+#include <proto/ethernet.h>
+
+/* enable structure packing */
+#if defined(__GNUC__)
+#define	PACKED	__attribute__((packed))
+#else
+#pragma pack(1)
+#define	PACKED
+#endif
+
+/* Reason Codes */
+
+/* 10 and 11 are from TGh. */
+#define DOT11_RC_BAD_PC			10	/* Unacceptable power capability element */
+#define DOT11_RC_BAD_CHANNELS		11	/* Unacceptable supported channels element */
+/* 12 is unused */
+/* 13 through 23 taken from P802.11i/D3.0, November 2002 */
+#define DOT11_RC_INVALID_WPA_IE		13	/* Invalid info. element */
+#define DOT11_RC_MIC_FAILURE		14	/* Michael failure */
+#define DOT11_RC_4WH_TIMEOUT		15	/* 4-way handshake timeout */
+#define DOT11_RC_GTK_UPDATE_TIMEOUT	16	/* Group key update timeout */
+#define DOT11_RC_WPA_IE_MISMATCH	17	/* WPA IE in 4-way handshake differs from
+						 * (re-)assoc. request/probe response
+						 */
+#define DOT11_RC_INVALID_MC_CIPHER	18	/* Invalid multicast cipher */
+#define DOT11_RC_INVALID_UC_CIPHER	19	/* Invalid unicast cipher */
+#define DOT11_RC_INVALID_AKMP		20	/* Invalid authenticated key management protocol */
+#define DOT11_RC_BAD_WPA_VERSION	21	/* Unsupported WPA version */
+#define DOT11_RC_INVALID_WPA_CAP	22	/* Invalid WPA IE capabilities */
+#define DOT11_RC_8021X_AUTH_FAIL	23	/* 802.1X authentication failure */
+
+#define WPA2_PMKID_LEN	16
+
+/* WPA IE fixed portion */
+typedef struct
+{
+	uint8 tag;	/* TAG */
+	uint8 length;	/* TAG length */
+	uint8 oui[3];	/* IE OUI */
+	uint8 oui_type;	/* OUI type */
+	struct {
+		uint8 low;
+		uint8 high;
+	} PACKED version;	/* IE version */
+} PACKED wpa_ie_fixed_t;
+#define WPA_IE_OUITYPE_LEN	4
+#define WPA_IE_FIXED_LEN	8
+#define WPA_IE_TAG_FIXED_LEN	6
+
+#ifdef BCMWPA2
+typedef struct {
+	uint8 tag;	/* TAG */
+	uint8 length;	/* TAG length */
+	struct {
+		uint8 low;
+		uint8 high;
+	} PACKED version;	/* IE version */
+} PACKED wpa_rsn_ie_fixed_t;
+#define WPA_RSN_IE_FIXED_LEN	4
+#define WPA_RSN_IE_TAG_FIXED_LEN	2
+typedef uint8 wpa_pmkid_t[WPA2_PMKID_LEN];
+#endif
+
+/* WPA suite/multicast suite */
+typedef struct
+{
+	uint8 oui[3];
+	uint8 type;
+} PACKED wpa_suite_t, wpa_suite_mcast_t;
+#define WPA_SUITE_LEN	4
+
+/* WPA unicast suite list/key management suite list */
+typedef struct
+{
+	struct {
+		uint8 low;
+		uint8 high;
+	} PACKED count;
+	wpa_suite_t list[1];
+} PACKED wpa_suite_ucast_t, wpa_suite_auth_key_mgmt_t;
+#define WPA_IE_SUITE_COUNT_LEN	2
+#ifdef BCMWPA2
+typedef struct
+{
+	struct {
+		uint8 low;
+		uint8 high;
+	} PACKED count;
+	wpa_pmkid_t list[1];
+} PACKED wpa_pmkid_list_t;
+#endif
+
+/* WPA cipher suites */
+#define WPA_CIPHER_NONE		0	/* None */
+#define WPA_CIPHER_WEP_40	1	/* WEP (40-bit) */
+#define WPA_CIPHER_TKIP		2	/* TKIP: default for WPA */
+#define WPA_CIPHER_AES_OCB	3	/* AES (OCB) */
+#define WPA_CIPHER_AES_CCM	4	/* AES (CCM) */
+#define WPA_CIPHER_WEP_104	5	/* WEP (104-bit) */
+
+#define IS_WPA_CIPHER(cipher)	((cipher) == WPA_CIPHER_NONE || \
+				 (cipher) == WPA_CIPHER_WEP_40 || \
+				 (cipher) == WPA_CIPHER_WEP_104 || \
+				 (cipher) == WPA_CIPHER_TKIP || \
+				 (cipher) == WPA_CIPHER_AES_OCB || \
+				 (cipher) == WPA_CIPHER_AES_CCM)
+
+/* WPA TKIP countermeasures parameters */
+#define WPA_TKIP_CM_DETECT	60	/* multiple MIC failure window (seconds) */
+#define WPA_TKIP_CM_BLOCK	60	/* countermeasures active window (seconds) */
+
+/* WPA capabilities defined in 802.11i */
+#define WPA_CAP_4_REPLAY_CNTRS		2
+#define WPA_CAP_16_REPLAY_CNTRS		3
+#define WPA_CAP_REPLAY_CNTR_SHIFT	2
+#define WPA_CAP_REPLAY_CNTR_MASK	0x000c
+
+/* WPA Specific defines */
+#define WPA_CAP_LEN	2	/* Length of RSN capabilities in RSN IE (2 octets) */
+
+#ifdef BCMWPA2
+#define	WPA_CAP_WPA2_PREAUTH		1
+#endif /* BCMWPA2 */
+
+#undef PACKED
+#if !defined(__GNUC__)
+#pragma pack()
+#endif
+
+#endif /* _proto_wpa_h_ */
diff --git a/package/broadcom-wl/src/include/typedefs.h b/package/broadcom-wl/src/include/typedefs.h
new file mode 100644
index 000000000..6c498bbcb
--- /dev/null
+++ b/package/broadcom-wl/src/include/typedefs.h
@@ -0,0 +1,230 @@
+/*
+ * Copyright 2006, Broadcom Corporation
+ * All Rights Reserved.
+ * 
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ * $Id: typedefs.h,v 1.1.1.12 2006/04/08 06:13:40 honor Exp $
+ */
+
+#ifndef _TYPEDEFS_H_
+#define _TYPEDEFS_H_
+
+/*
+ * Inferred Typedefs
+ *
+ */
+
+/* Infer the compile environment based on preprocessor symbols and pramas.
+ * Override type definitions as needed, and include configuration dependent
+ * header files to define types.
+ */
+
+#ifdef __cplusplus
+
+#define TYPEDEF_BOOL
+#ifndef FALSE
+#define FALSE	false
+#endif
+#ifndef TRUE
+#define TRUE	true
+#endif
+
+#endif	/* __cplusplus */
+
+#if defined(_NEED_SIZE_T_)
+typedef long unsigned int size_t;
+#endif
+
+#define TYPEDEF_UINT
+#define TYPEDEF_USHORT
+#define TYPEDEF_ULONG
+
+
+/* Do not support the (u)int64 types with strict ansi for GNU C */
+#if defined(__GNUC__) && defined(__STRICT_ANSI__)
+#define TYPEDEF_INT64
+#define TYPEDEF_UINT64
+#endif
+
+/* pick up ushort & uint from standard types.h */
+#if defined(linux) && defined(__KERNEL__)
+#include <linux/types.h>	/* sys/types.h and linux/types.h are oil and water */
+#else
+#include <sys/types.h>
+#endif
+
+/* use the default typedefs in the next section of this file */
+#define USE_TYPEDEF_DEFAULTS
+
+/*
+ * Default Typedefs
+ *
+ */
+
+#ifdef USE_TYPEDEF_DEFAULTS
+#undef USE_TYPEDEF_DEFAULTS
+
+#ifndef TYPEDEF_BOOL
+typedef	/* @abstract@ */ unsigned char	bool;
+#endif
+
+/* define uchar, ushort, uint, ulong */
+
+#ifndef TYPEDEF_UCHAR
+typedef unsigned char	uchar;
+#endif
+
+#ifndef TYPEDEF_USHORT
+typedef unsigned short	ushort;
+#endif
+
+#ifndef TYPEDEF_UINT
+typedef unsigned int	uint;
+#endif
+
+#ifndef TYPEDEF_ULONG
+typedef unsigned long	ulong;
+#endif
+
+/* define [u]int8/16/32/64, uintptr */
+
+#ifndef TYPEDEF_UINT8
+typedef unsigned char	uint8;
+#endif
+
+#ifndef TYPEDEF_UINT16
+typedef unsigned short	uint16;
+#endif
+
+#ifndef TYPEDEF_UINT32
+typedef unsigned int	uint32;
+#endif
+
+#ifndef TYPEDEF_UINT64
+typedef unsigned long long uint64;
+#endif
+
+#ifndef TYPEDEF_UINTPTR
+typedef unsigned int	uintptr;
+#endif
+
+#ifndef TYPEDEF_INT8
+typedef signed char	int8;
+#endif
+
+#ifndef TYPEDEF_INT16
+typedef signed short	int16;
+#endif
+
+#ifndef TYPEDEF_INT32
+typedef signed int	int32;
+#endif
+
+#ifndef TYPEDEF_INT64
+typedef signed long long int64;
+#endif
+
+/* define float32/64, float_t */
+
+#ifndef TYPEDEF_FLOAT32
+typedef float		float32;
+#endif
+
+#ifndef TYPEDEF_FLOAT64
+typedef double		float64;
+#endif
+
+/*
+ * abstracted floating point type allows for compile time selection of
+ * single or double precision arithmetic.  Compiling with -DFLOAT32
+ * selects single precision; the default is double precision.
+ */
+
+#ifndef TYPEDEF_FLOAT_T
+
+#if defined(FLOAT32)
+typedef float32 float_t;
+#else /* default to double precision floating point */
+typedef float64 float_t;
+#endif
+
+#endif /* TYPEDEF_FLOAT_T */
+
+/* define macro values */
+
+#ifndef FALSE
+#define FALSE	0
+#endif
+
+#ifndef TRUE
+#define TRUE	1  /* TRUE */
+#endif
+
+#ifndef NULL
+#define	NULL	0
+#endif
+
+#ifndef OFF
+#define	OFF	0
+#endif
+
+#ifndef ON
+#define	ON	1  /* ON = 1 */
+#endif
+
+#define	AUTO	(-1) /* Auto = -1 */
+
+/* define PTRSZ, INLINE */
+
+#ifndef PTRSZ
+#define	PTRSZ	sizeof(char*)
+#endif
+
+#ifndef INLINE
+
+#ifdef _MSC_VER
+
+#define INLINE __inline
+
+#elif __GNUC__
+
+#define INLINE __inline__
+
+#else
+
+#define INLINE
+
+#endif /* _MSC_VER */
+
+#endif /* INLINE */
+
+#undef TYPEDEF_BOOL
+#undef TYPEDEF_UCHAR
+#undef TYPEDEF_USHORT
+#undef TYPEDEF_UINT
+#undef TYPEDEF_ULONG
+#undef TYPEDEF_UINT8
+#undef TYPEDEF_UINT16
+#undef TYPEDEF_UINT32
+#undef TYPEDEF_UINT64
+#undef TYPEDEF_UINTPTR
+#undef TYPEDEF_INT8
+#undef TYPEDEF_INT16
+#undef TYPEDEF_INT32
+#undef TYPEDEF_INT64
+#undef TYPEDEF_FLOAT32
+#undef TYPEDEF_FLOAT64
+#undef TYPEDEF_FLOAT_T
+
+#endif /* USE_TYPEDEF_DEFAULTS */
+
+/* 
+ * Including the bcmdefs.h here, to make sure everyone including typedefs.h 
+ * gets this automatically 
+*/
+#include <bcmdefs.h>
+
+#endif /* _TYPEDEFS_H_ */
diff --git a/package/broadcom-wl/src/include/wlioctl.h b/package/broadcom-wl/src/include/wlioctl.h
new file mode 100644
index 000000000..0558415d3
--- /dev/null
+++ b/package/broadcom-wl/src/include/wlioctl.h
@@ -0,0 +1,1384 @@
+/*
+ * Custom OID/ioctl definitions for
+ * Broadcom 802.11abg Networking Device Driver
+ *
+ * Definitions subject to change without notice.
+ *
+ * Copyright 2006, Broadcom Corporation
+ * All Rights Reserved.
+ * 
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ *
+ * $Id: wlioctl.h,v 1.1.1.22 2006/04/15 01:29:08 michael Exp $
+ */
+
+#ifndef _wlioctl_h_
+#define	_wlioctl_h_
+
+#include <typedefs.h>
+#include <proto/ethernet.h>
+#include <proto/bcmeth.h>
+#include <proto/bcmevent.h>
+#include <proto/802.11.h>
+
+#ifdef __NetBSD__
+/* NetBSD 2.0 does not have SIOCDEVPRIVATE. This is NetBSD 2.0 specific */
+#define SIOCDEVPRIVATE	_IOWR('i', 139, struct ifreq)
+#endif
+
+/* require default structure packing */
+#if !defined(__GNUC__)
+#pragma pack(push, 8)
+#endif
+
+/* A chanspec holds the channel number, band, bandwidth and control sideband */
+typedef uint16 chanspec_t;
+#define WL_CHANSPEC_CHAN_MASK		0x00ff
+
+#define WL_CHANSPEC_CTL_SB_MASK		0x0300
+#define WL_CHANSPEC_CTL_SB_SHIFT	     8
+#define WL_CHANSPEC_CTL_SB_LOWER	0x0100
+#define WL_CHANSPEC_CTL_SB_UPPER	0x0200
+#define WL_CHANSPEC_CTL_SB_NONE		0x0300
+
+#define WL_CHANSPEC_BW_MASK		0x0C00
+#define WL_CHANSPEC_BW_SHIFT		    10
+#define WL_CHANSPEC_BW_10		0x0400
+#define WL_CHANSPEC_BW_20		0x0800
+#define WL_CHANSPEC_BW_40		0x0C00
+
+#define WL_CHANSPEC_BAND_MASK		0xf000
+#define WL_CHANSPEC_BAND_SHIFT		12
+#define WL_CHANSPEC_BAND_5G		0x1000
+#define WL_CHANSPEC_BAND_2G		0x2000
+#define INVCHANSPEC	255
+
+/* Legacy structure to help keep backward compatible wl tool and tray app */
+
+#define	LEGACY_WL_BSS_INFO_VERSION	107	/* older version of wl_bss_info struct */
+
+typedef struct wl_bss_info_107 {
+	uint32		version;		/* version field */
+	uint32		length;			/* byte length of data in this record,
+						 * starting at version and including IEs
+						 */
+	struct ether_addr BSSID;
+	uint16		beacon_period;		/* units are Kusec */
+	uint16		capability;		/* Capability information */
+	uint8		SSID_len;
+	uint8		SSID[32];
+	struct {
+		uint	count;			/* # rates in this set */
+		uint8	rates[16];		/* rates in 500kbps units w/hi bit set if basic */
+	} rateset;				/* supported rates */
+	uint8		channel;		/* Channel no. */
+	uint16		atim_window;		/* units are Kusec */
+	uint8		dtim_period;		/* DTIM period */
+	int16		RSSI;			/* receive signal strength (in dBm) */
+	int8		phy_noise;		/* noise (in dBm) */
+	uint32		ie_length;		/* byte length of Information Elements */
+	/* variable length Information Elements */
+} wl_bss_info_107_t;
+
+/*
+ * Per-bss information structure.
+ */
+
+#define	WL_BSS_INFO_VERSION	108		/* current version of wl_bss_info struct */
+
+/* BSS info structure
+ * Applications MUST CHECK ie_offset field and length field to access IEs and
+ * next bss_info structure in a vector (in wl_scan_results_t)
+ */
+typedef struct wl_bss_info {
+	uint32		version;		/* version field */
+	uint32		length;			/* byte length of data in this record,
+						 * starting at version and including IEs
+						 */
+	struct ether_addr BSSID;
+	uint16		beacon_period;		/* units are Kusec */
+	uint16		capability;		/* Capability information */
+	uint8		SSID_len;
+	uint8		SSID[32];
+	struct {
+		uint	count;			/* # rates in this set */
+		uint8	rates[16];		/* rates in 500kbps units w/hi bit set if basic */
+	} rateset;				/* supported rates */
+	chanspec_t	chanspec;		/* chanspec for bss */
+	uint16		atim_window;		/* units are Kusec */
+	uint8		dtim_period;		/* DTIM period */
+	int16		RSSI;			/* receive signal strength (in dBm) */
+	int8		phy_noise;		/* noise (in dBm) */
+
+	bool		n_cap;			/* BSS is 802.11N Capable */
+	uint32		nbss_cap;		/* 802.11N BSS Capabilities (based on EWC_CAP_*) */
+	uint8		ctl_ch;			/* 802.11N BSS control channel number */
+	uint32		reserved[2];		/* Reserved for expansion of BSS properties */
+	uint8		basic_mcs[MCSSET_LEN];	/* 802.11N BSS required MCS set */
+
+	uint16		ie_offset;		/* offset at which IEs start, from beginning */
+	uint32		ie_length;		/* byte length of Information Elements */
+	/* Add new fields here */
+	/* variable length Information Elements */
+} wl_bss_info_t;
+
+typedef struct wlc_ssid {
+	uint32		SSID_len;
+	uchar		SSID[32];
+} wlc_ssid_t;
+
+typedef struct wl_scan_params {
+	wlc_ssid_t ssid;		/* default: {0, ""} */
+	struct ether_addr bssid;	/* default: bcast */
+	int8 bss_type;			/* default: any,
+					 * DOT11_BSSTYPE_ANY/INFRASTRUCTURE/INDEPENDENT
+					 */
+	int8 scan_type;			/* -1 use default, DOT11_SCANTYPE_ACTIVE/PASSIVE */
+	int32 nprobes;			/* -1 use default, number of probes per channel */
+	int32 active_time;		/* -1 use default, dwell time per channel for
+					 * active scanning
+					 */
+	int32 passive_time;		/* -1 use default, dwell time per channel
+					 * for passive scanning
+					 */
+	int32 home_time;		/* -1 use default, dwell time for the home channel
+					 * between channel scans
+					 */
+	int32 channel_num;		/* 0 use default (all available channels), count of
+					 * channels in channel_list
+					 */
+	uint16 channel_list[1];		/* list of chanspecs */
+} wl_scan_params_t;
+/* size of wl_scan_params not including variable length array */
+#define WL_SCAN_PARAMS_FIXED_SIZE 64
+
+typedef struct wl_scan_results {
+	uint32 buflen;
+	uint32 version;
+	uint32 count;
+	wl_bss_info_t bss_info[1];
+} wl_scan_results_t;
+/* size of wl_scan_results not including variable length array */
+#define WL_SCAN_RESULTS_FIXED_SIZE 12
+
+
+#define WL_NUMRATES		255	/* max # of rates in a rateset */
+typedef struct wl_rateset {
+	uint32	count;			/* # rates in this set */
+	uint8	rates[WL_NUMRATES];	/* rates in 500kbps units w/hi bit set if basic */
+} wl_rateset_t;
+
+/* uint32 list */
+typedef struct wl_uint32_list {
+	/* in - # of elements, out - # of entries */
+	uint32 count;
+	/* variable length uint32 list */
+	uint32 element[1];
+} wl_uint32_list_t;
+
+#define WLC_CNTRY_BUF_SZ	4		/* Country string is 3 bytes + NULL */
+
+/* defines used by the nrate iovar */
+#define NRATE_MCS_INUSE	0x00000080	/* MSC in use,indicates b0-6 holds an mcs */
+#define NRATE_RATE_MASK 0x0000007f	/* rate/mcs value */
+#define NRATE_STF_MASK	0x0000ff00	/* stf mode mask: siso, cdd, stbc, sdm */
+#define NRATE_STF_SHIFT	8		/* stf mode shift */
+
+#define ANTENNA_NUM_1	1		/* total number of antennas to be used */
+#define ANTENNA_NUM_2	2
+#define ANTENNA_NUM_3	3
+#define ANTENNA_NUM_4	4
+
+typedef struct wl_channels_in_country {
+	uint32 buflen;
+	uint32 band;
+	char country_abbrev[WLC_CNTRY_BUF_SZ];
+	uint32 count;
+	uint32 channel[1];
+} wl_channels_in_country_t;
+
+typedef struct wl_country_list {
+	uint32 buflen;
+	uint32 band_set;
+	uint32 band;
+	uint32 count;
+	char country_abbrev[1];
+} wl_country_list_t;
+
+#define WL_RM_TYPE_BASIC	1
+#define WL_RM_TYPE_CCA		2
+#define WL_RM_TYPE_RPI		3
+
+#define WL_RM_FLAG_PARALLEL	(1<<0)
+
+#define WL_RM_FLAG_LATE		(1<<1)
+#define WL_RM_FLAG_INCAPABLE	(1<<2)
+#define WL_RM_FLAG_REFUSED	(1<<3)
+
+typedef struct wl_rm_req_elt {
+	int8	type;
+	int8	flags;
+	chanspec_t	chanspec;
+	uint32	token;		/* token for this measurement */
+	uint32	tsf_h;		/* TSF high 32-bits of Measurement start time */
+	uint32	tsf_l;		/* TSF low 32-bits */
+	uint32	dur;		/* TUs */
+} wl_rm_req_elt_t;
+
+typedef struct wl_rm_req {
+	uint32	token;		/* overall measurement set token */
+	uint32	count;		/* number of measurement requests */
+	wl_rm_req_elt_t	req[1];	/* variable length block of requests */
+} wl_rm_req_t;
+#define WL_RM_REQ_FIXED_LEN	8
+
+typedef struct wl_rm_rep_elt {
+	int8	type;
+	int8	flags;
+	chanspec_t	chanspec;
+	uint32	token;		/* token for this measurement */
+	uint32	tsf_h;		/* TSF high 32-bits of Measurement start time */
+	uint32	tsf_l;		/* TSF low 32-bits */
+	uint32	dur;		/* TUs */
+	uint32	len;		/* byte length of data block */
+	uint8	data[1];	/* variable length data block */
+} wl_rm_rep_elt_t;
+#define WL_RM_REP_ELT_FIXED_LEN	24	/* length excluding data block */
+
+#define WL_RPI_REP_BIN_NUM 8
+typedef struct wl_rm_rpi_rep {
+	uint8	rpi[WL_RPI_REP_BIN_NUM];
+	int8	rpi_max[WL_RPI_REP_BIN_NUM];
+} wl_rm_rpi_rep_t;
+
+typedef struct wl_rm_rep {
+	uint32	token;		/* overall measurement set token */
+	uint32	len;		/* length of measurement report block */
+	wl_rm_rep_elt_t	rep[1];	/* variable length block of reports */
+} wl_rm_rep_t;
+#define WL_RM_REP_FIXED_LEN	8
+
+
+#if defined(BCMSUP_PSK)
+typedef enum sup_auth_status {
+	WLC_SUP_DISCONNECTED = 0,
+	WLC_SUP_CONNECTING,
+	WLC_SUP_IDREQUIRED,
+	WLC_SUP_AUTHENTICATING,
+	WLC_SUP_AUTHENTICATED,
+	WLC_SUP_KEYXCHANGE,
+	WLC_SUP_KEYED,
+	WLC_SUP_TIMEOUT
+} sup_auth_status_t;
+#endif	/* BCMCCX | BCMSUP_PSK */
+
+/* Enumerate crypto algorithms */
+#define	CRYPTO_ALGO_OFF			0
+#define	CRYPTO_ALGO_WEP1		1
+#define	CRYPTO_ALGO_TKIP		2
+#define	CRYPTO_ALGO_WEP128		3
+#define CRYPTO_ALGO_AES_CCM		4
+#define CRYPTO_ALGO_AES_OCB_MSDU	5
+#define CRYPTO_ALGO_AES_OCB_MPDU	6
+#define CRYPTO_ALGO_NALG		7
+
+#define WSEC_GEN_MIC_ERROR	0x0001
+#define WSEC_GEN_REPLAY		0x0002
+
+#define WL_SOFT_KEY	(1 << 0)	/* Indicates this key is using soft encrypt */
+#define WL_PRIMARY_KEY	(1 << 1)	/* Indicates this key is the primary (ie tx) key */
+#define WL_KF_RES_4	(1 << 4)	/* Reserved for backward compat */
+#define WL_KF_RES_5	(1 << 5)	/* Reserved for backward compat */
+
+typedef struct wl_wsec_key {
+	uint32		index;		/* key index */
+	uint32		len;		/* key length */
+	uint8		data[DOT11_MAX_KEY_SIZE];	/* key data */
+	uint32		pad_1[18];
+	uint32		algo;		/* CRYPTO_ALGO_AES_CCM, CRYPTO_ALGO_WEP128, etc */
+	uint32		flags;		/* misc flags */
+	uint32		pad_2[2];
+	int		pad_3;
+	int		iv_initialized;	/* has IV been initialized already? */
+	int		pad_4;
+	/* Rx IV */
+	struct {
+		uint32	hi;		/* upper 32 bits of IV */
+		uint16	lo;		/* lower 16 bits of IV */
+	} rxiv;
+	uint32		pad_5[2];
+	struct ether_addr ea;		/* per station */
+} wl_wsec_key_t;
+
+#define WSEC_MIN_PSK_LEN	8
+#define WSEC_MAX_PSK_LEN	64
+
+/* Flag for key material needing passhash'ing */
+#define WSEC_PASSPHRASE		(1<<0)
+
+/* receptacle for WLC_SET_WSEC_PMK parameter */
+typedef struct {
+	ushort	key_len;		/* octets in key material */
+	ushort	flags;			/* key handling qualification */
+	uint8	key[WSEC_MAX_PSK_LEN];	/* PMK material */
+} wsec_pmk_t;
+
+/* wireless security bitvec */
+#define WEP_ENABLED		0x0001
+#define TKIP_ENABLED		0x0002
+#define AES_ENABLED		0x0004
+#define WSEC_SWFLAG		0x0008
+#define SES_OW_ENABLED		0x0040	/* to go into transition mode without setting wep */
+#define FIPS_ENABLED	0x0080
+
+/* WPA authentication mode bitvec */
+#define WPA_AUTH_DISABLED	0x0000	/* Legacy (i.e., non-WPA) */
+#define WPA_AUTH_NONE		0x0001	/* none (IBSS) */
+#define WPA_AUTH_UNSPECIFIED	0x0002	/* over 802.1x */
+#define WPA_AUTH_PSK		0x0004	/* Pre-shared key */
+/* #define WPA_AUTH_8021X 0x0020 */	/* 802.1x, reserved */
+#ifdef BCMWPA2
+#define WPA2_AUTH_UNSPECIFIED	0x0040	/* over 802.1x */
+#define WPA2_AUTH_PSK		0x0080	/* Pre-shared key */
+#endif	/* BCMWPA2 */
+
+#ifdef BCMWPA2
+/* pmkid */
+#define	MAXPMKID		16	
+
+typedef struct _pmkid
+{
+	struct ether_addr	BSSID;
+	uint8			PMKID[WPA2_PMKID_LEN];
+} pmkid_t;
+
+typedef struct _pmkid_list
+{
+	uint32	npmkid;
+	pmkid_t	pmkid[1];
+} pmkid_list_t;
+
+typedef struct _pmkid_cand {
+	struct ether_addr	BSSID;
+	uint8			preauth;
+} pmkid_cand_t;
+
+typedef struct _pmkid_cand_list {
+	uint32	npmkid_cand;
+	pmkid_cand_t	pmkid_cand[1];
+} pmkid_cand_list_t;
+#endif	/* BCMWPA2 */
+
+typedef struct wl_led_info {
+	uint32		index;		/* led index */
+	uint32		behavior;
+	bool		activehi;
+} wl_led_info_t;
+
+typedef struct wlc_assoc_info {
+	uint32		req_len;
+	uint32		resp_len;
+	uint32		flags;
+	struct dot11_assoc_req req;
+	struct ether_addr reassoc_bssid; /* used in reassoc's */
+	struct dot11_assoc_resp resp;
+} wl_assoc_info_t;
+/* flags */
+#define WLC_ASSOC_REQ_IS_REASSOC 0x01 /* assoc req was actually a reassoc */
+/* srom read/write struct passed through ioctl */
+typedef struct {
+	uint	byteoff;		/* byte offset */
+	uint	nbytes;		/* number of bytes */
+	uint16 buf[1];
+} srom_rw_t;
+
+/* R_REG and W_REG struct passed through ioctl */
+typedef struct {
+	uint32	byteoff;	/* byte offset of the field in d11regs_t */
+	uint32	val;		/* read/write value of the field */
+	uint32	size;		/* sizeof the field */
+	uint	band;		/* band (optional) */
+} rw_reg_t;
+
+/* Structure used by GET/SET_ATTEN ioctls - it controls power in b/g-band */
+/* PCL - Power Control Loop */
+/* current gain setting is replaced by user input */
+#define WL_ATTEN_APP_INPUT_PCL_OFF	0	/* turn off PCL, apply supplied input */
+#define WL_ATTEN_PCL_ON			1	/* turn on PCL */
+/* current gain setting is maintained */
+#define WL_ATTEN_PCL_OFF		2	/* turn off PCL. */
+typedef struct {
+	uint16	auto_ctrl;	/* WL_ATTEN_XX */
+	uint16	bb;		/* Baseband attenuation */
+	uint16	radio;		/* Radio attenuation */
+	uint16	txctl1;		/* Radio TX_CTL1 value */
+} atten_t;
+
+/* defines used by poweridx iovar - it controls power in a-band */
+/* current gain setting is maintained */
+#define WL_PWRIDX_PCL_OFF	-2	/* turn off PCL.  */
+#define WL_PWRIDX_PCL_ON	-1	/* turn on PCL */
+#define WL_PWRIDX_LOWER_LIMIT	-2	/* lower limit */
+#define WL_PWRIDX_UPPER_LIMIT	63	/* upper limit */
+/* value >= 0 causes
+ *	- input to be set to that value
+ *	- PCL to be off
+ */
+
+/* Used to get specific STA parameters */
+typedef struct {
+	uint32	val;
+	struct ether_addr ea;
+} scb_val_t;
+
+
+/* Event data type */
+typedef struct wlc_event {
+	wl_event_msg_t event;		/* encapsulated event */
+	struct ether_addr *addr;	/* used to keep a trace of the potential present of
+					 * an address in wlc_event_msg_t
+					 */
+	void *data;			/* used to hang additional data on an event */
+	struct wlc_event *next;		/* enables ordered list of pending events */
+} wlc_event_t;
+
+#define BCM_MAC_STATUS_INDICATION	(0x40010200L)
+
+/* Please update the following when modifying this structure:
+ *    StaInfo Twiki page flags section - description of the sta_info_t struct
+ *    src/wl/exe/wlu.c - print of sta_info_t
+ * Pay attention to version if structure changes.
+ */
+typedef struct {
+	uint16			ver;		/* version of this struct */
+	uint16			len;		/* length in bytes of this structure */
+	uint16			cap;		/* sta's advertised capabilities */
+	uint32			flags;		/* flags defined below */
+	uint32			idle;		/* time since data pkt rx'd from sta */
+	struct ether_addr	ea;		/* Station address */
+	wl_rateset_t		rateset;	/* rateset in use */
+	uint32			in;		/* seconds elapsed since associated */
+	uint32			listen_interval_inms; /* Min Listen interval in ms for this STA */
+} sta_info_t;
+
+#define WL_STA_VER		2
+
+/* Flags for sta_info_t indicating properties of STA */
+#define WL_STA_BRCM		0x1		/* Running a Broadcom driver */
+#define WL_STA_WME		0x2		/* WMM association */
+#define WL_STA_ABCAP		0x4		/* Afterburner-capable */
+#define WL_STA_AUTHE		0x8		/* Authenticated */
+#define WL_STA_ASSOC		0x10		/* Associated */
+#define WL_STA_AUTHO		0x20		/* Authorized */
+#define WL_STA_WDS		0x40		/* Wireless Distribution System */
+#define WL_STA_WDS_LINKUP	0x80		/* WDS traffic/probes flowing properly */
+#define WL_STA_PS		0x100		/* STA is in power save mode from AP's viewpoint */
+#define WL_STA_APSD_BE		0x200		/* APSD delv/trigger for AC_BE is default enabled */
+#define WL_STA_APSD_BK		0x400		/* APSD delv/trigger for AC_BK is default enabled */
+#define WL_STA_APSD_VI		0x800		/* APSD delv/trigger for AC_VI is default enabled */
+#define WL_STA_APSD_VO		0x1000		/* APSD delv/trigger for AC_VO is default enabled */
+#define WL_STA_N_CAP		0x2000		/* STA 802.11n capable */
+
+#define WL_WDS_LINKUP		WL_STA_WDS_LINKUP	/* deprecated */
+
+/*
+ * Country locale determines which channels are available to us.
+ */
+typedef enum _wlc_locale {
+	WLC_WW = 0,	/* Worldwide */
+	WLC_THA,	/* Thailand */
+	WLC_ISR,	/* Israel */
+	WLC_JDN,	/* Jordan */
+	WLC_PRC,	/* China */
+	WLC_JPN,	/* Japan */
+	WLC_FCC,	/* USA */
+	WLC_EUR,	/* Europe */
+	WLC_USL,	/* US Low Band only */
+	WLC_JPH,	/* Japan High Band only */
+	WLC_ALL,	/* All the channels in this band */
+	WLC_11D,	/* Represents locale received by 11d beacons */
+	WLC_LAST_LOCALE,
+	WLC_UNDEFINED_LOCALE = 0xf
+} wlc_locale_t;
+
+/* channel encoding */
+typedef struct channel_info {
+	int hw_channel;
+	int target_channel;
+	int scan_channel;
+} channel_info_t;
+
+/* For ioctls that take a list of MAC addresses */
+struct maclist {
+	uint count;			/* number of MAC addresses */
+	struct ether_addr ea[1];	/* variable length array of MAC addresses */
+};
+
+/* get pkt count struct passed through ioctl */
+typedef struct get_pktcnt {
+	uint rx_good_pkt;
+	uint rx_bad_pkt;
+	uint tx_good_pkt;
+	uint tx_bad_pkt;
+} get_pktcnt_t;
+
+/* Linux network driver ioctl encoding */
+typedef struct wl_ioctl {
+	uint cmd;	/* common ioctl definition */
+	void *buf;	/* pointer to user buffer */
+	uint len;	/* length of user buffer */
+	bool set;	/* get or set request (optional) */
+	uint used;	/* bytes read or written (optional) */
+	uint needed;	/* bytes needed (optional) */
+} wl_ioctl_t;
+
+/*
+ * Structure for passing hardware and software
+ * revision info up from the driver.
+ */
+typedef struct wlc_rev_info {
+	uint		vendorid;	/* PCI vendor id */
+	uint		deviceid;	/* device id of chip */
+	uint		radiorev;	/* radio revision */
+	uint		chiprev;	/* chip revision */
+	uint		corerev;	/* core revision */
+	uint		boardid;	/* board identifier (usu. PCI sub-device id) */
+	uint		boardvendor;	/* board vendor (usu. PCI sub-vendor id) */
+	uint		boardrev;	/* board revision */
+	uint		driverrev;	/* driver version */
+	uint		ucoderev;	/* microcode version */
+	uint		bus;		/* bus type */
+	uint		chipnum;	/* chip number */
+} wlc_rev_info_t;
+
+#define WL_BRAND_MAX 10
+typedef struct wl_instance_info {
+	uint instance;
+	char brand[WL_BRAND_MAX];
+} wl_instance_info_t;
+
+/* check this magic number */
+#define WLC_IOCTL_MAGIC		0x14e46c77
+
+/* bump this number if you change the ioctl interface */
+#define WLC_IOCTL_VERSION	1
+
+#define	WLC_IOCTL_MAXLEN	8192		/* max length ioctl buffer required */
+#define	WLC_IOCTL_SMLEN		256		/* "small" length ioctl buffer required */
+
+/* common ioctl definitions */
+#define WLC_GET_MAGIC				0
+#define WLC_GET_VERSION				1
+#define WLC_UP					2
+#define WLC_DOWN				3
+#define WLC_DUMP				6
+#define WLC_GET_MSGLEVEL			7
+#define WLC_SET_MSGLEVEL			8
+#define WLC_GET_PROMISC				9
+#define WLC_SET_PROMISC				10
+#define WLC_GET_RATE				12
+/* #define WLC_SET_RATE				13 */ /* no longer supported */
+#define WLC_GET_INSTANCE			14
+/* #define WLC_GET_FRAG				15 */ /* no longer supported */
+/* #define WLC_SET_FRAG				16 */ /* no longer supported */
+/* #define WLC_GET_RTS				17 */ /* no longer supported */
+/* #define WLC_SET_RTS				18 */ /* no longer supported */
+#define WLC_GET_INFRA				19
+#define WLC_SET_INFRA				20
+#define WLC_GET_AUTH				21
+#define WLC_SET_AUTH				22
+#define WLC_GET_BSSID				23
+#define WLC_SET_BSSID				24
+#define WLC_GET_SSID				25
+#define WLC_SET_SSID				26
+#define WLC_RESTART				27
+#define WLC_GET_CHANNEL				29
+#define WLC_SET_CHANNEL				30
+#define WLC_GET_SRL				31
+#define WLC_SET_SRL				32
+#define WLC_GET_LRL				33
+#define WLC_SET_LRL				34
+#define WLC_GET_PLCPHDR				35
+#define WLC_SET_PLCPHDR				36
+#define WLC_GET_RADIO				37
+#define WLC_SET_RADIO				38
+#define WLC_GET_PHYTYPE				39
+/* #define WLC_GET_WEP				42 */ /* no longer supported */
+/* #define WLC_SET_WEP				43 */ /* no longer supported */
+#define WLC_GET_KEY				44
+#define WLC_SET_KEY				45
+#define WLC_GET_REGULATORY			46
+#define WLC_SET_REGULATORY			47
+#define WLC_GET_PASSIVE 			48
+#define WLC_SET_PASSIVE 			49
+#define WLC_SCAN				50
+#define WLC_SCAN_RESULTS			51
+#define WLC_DISASSOC				52
+#define WLC_REASSOC				53
+#define WLC_GET_ROAM_TRIGGER			54
+#define WLC_SET_ROAM_TRIGGER			55
+#define WLC_GET_TXANT				61
+#define WLC_SET_TXANT				62
+#define WLC_GET_ANTDIV				63
+#define WLC_SET_ANTDIV				64
+/* #define WLC_GET_TXPWR			65 */ /* no longer supported */
+/* #define WLC_SET_TXPWR			66 */ /* no longer supported */
+#define WLC_GET_CLOSED				67
+#define WLC_SET_CLOSED				68
+#define WLC_GET_MACLIST				69
+#define WLC_SET_MACLIST				70
+#define WLC_GET_RATESET				71
+#define WLC_SET_RATESET				72
+#define WLC_GET_LOCALE				73
+#define WLC_LONGTRAIN				74
+#define WLC_GET_BCNPRD				75
+#define WLC_SET_BCNPRD				76
+#define WLC_GET_DTIMPRD				77
+#define WLC_SET_DTIMPRD				78
+#define WLC_GET_SROM				79
+#define WLC_SET_SROM				80
+#define WLC_GET_WEP_RESTRICT			81
+#define WLC_SET_WEP_RESTRICT			82
+#define WLC_GET_COUNTRY				83
+#define WLC_SET_COUNTRY				84
+#define WLC_GET_PM				85
+#define WLC_SET_PM				86
+#define WLC_GET_WAKE				87
+#define WLC_SET_WAKE				88
+#define WLC_GET_D11CNTS				89
+#define WLC_GET_FORCELINK			90	/* ndis only */
+#define WLC_SET_FORCELINK			91	/* ndis only */
+#define WLC_FREQ_ACCURACY			92
+#define WLC_CARRIER_SUPPRESS			93
+#define WLC_GET_PHYREG				94
+#define WLC_SET_PHYREG				95
+#define WLC_GET_RADIOREG			96
+#define WLC_SET_RADIOREG			97
+#define WLC_GET_REVINFO				98
+#define WLC_GET_UCANTDIV			99
+#define WLC_SET_UCANTDIV			100
+#define WLC_R_REG				101
+#define WLC_W_REG				102
+#define WLC_DIAG_LOOPBACK			103
+#define WLC_RESET_D11CNTS			104
+#define WLC_GET_MACMODE				105
+#define WLC_SET_MACMODE				106
+#define WLC_GET_MONITOR				107
+#define WLC_SET_MONITOR				108
+#define WLC_GET_GMODE				109
+#define WLC_SET_GMODE				110
+#define WLC_GET_LEGACY_ERP			111
+#define WLC_SET_LEGACY_ERP			112
+#define WLC_GET_RX_ANT				113
+#define WLC_GET_CURR_RATESET			114	/* current rateset */
+#define WLC_GET_SCANSUPPRESS			115
+#define WLC_SET_SCANSUPPRESS			116
+#define WLC_GET_AP				117
+#define WLC_SET_AP				118
+#define WLC_GET_EAP_RESTRICT			119
+#define WLC_SET_EAP_RESTRICT			120
+#define WLC_SCB_AUTHORIZE			121
+#define WLC_SCB_DEAUTHORIZE			122
+#define WLC_GET_WDSLIST				123
+#define WLC_SET_WDSLIST				124
+#define WLC_GET_ATIM				125
+#define WLC_SET_ATIM				126
+#define WLC_GET_RSSI				127
+#define WLC_GET_PHYANTDIV			128
+#define WLC_SET_PHYANTDIV			129
+#define WLC_AP_RX_ONLY				130
+#define WLC_GET_TX_PATH_PWR			131
+#define WLC_SET_TX_PATH_PWR			132
+#define WLC_GET_WSEC				133
+#define WLC_SET_WSEC				134
+#define WLC_GET_PHY_NOISE			135
+#define WLC_GET_BSS_INFO			136
+#define WLC_GET_PKTCNTS				137
+#define WLC_GET_LAZYWDS				138
+#define WLC_SET_LAZYWDS				139
+#define WLC_GET_BANDLIST			140
+#define WLC_GET_BAND				141
+#define WLC_SET_BAND				142
+#define WLC_SCB_DEAUTHENTICATE			143
+#define WLC_GET_SHORTSLOT			144
+#define WLC_GET_SHORTSLOT_OVERRIDE		145
+#define WLC_SET_SHORTSLOT_OVERRIDE		146
+#define WLC_GET_SHORTSLOT_RESTRICT		147
+#define WLC_SET_SHORTSLOT_RESTRICT		148
+#define WLC_GET_GMODE_PROTECTION		149
+#define WLC_GET_GMODE_PROTECTION_OVERRIDE	150
+#define WLC_SET_GMODE_PROTECTION_OVERRIDE	151
+#define WLC_UPGRADE				152
+/* #define WLC_GET_MRATE			153 */ /* no longer supported */
+/* #define WLC_SET_MRATE			154 */ /* no longer supported */
+#define WLC_GET_ASSOCLIST			159
+#define WLC_GET_CLK				160
+#define WLC_SET_CLK				161
+#define WLC_GET_UP				162
+#define WLC_OUT					163
+#define WLC_GET_WPA_AUTH			164
+#define WLC_SET_WPA_AUTH			165
+#define WLC_GET_PROTECTION_CONTROL		178
+#define WLC_SET_PROTECTION_CONTROL		179
+#define WLC_GET_PHYLIST				180
+#define WLC_GET_KEY_SEQ				183
+/* #define WLC_GET_GMODE_PROTECTION_CTS		198 */ /* no longer supported */
+/* #define WLC_SET_GMODE_PROTECTION_CTS		199 */ /* no longer supported */
+#define WLC_GET_PIOMODE				203
+#define WLC_SET_PIOMODE				204
+#define WLC_SET_LED				209
+#define WLC_GET_LED				210
+#define WLC_GET_CHANNEL_SEL			215
+#define WLC_START_CHANNEL_SEL			216
+#define WLC_GET_VALID_CHANNELS			217
+#define WLC_GET_FAKEFRAG			218
+#define WLC_SET_FAKEFRAG			219
+#define WLC_GET_WET				230
+#define WLC_SET_WET				231
+#define WLC_GET_KEY_PRIMARY			235
+#define WLC_SET_KEY_PRIMARY			236
+#define WLC_GET_RADAR				242
+#define WLC_SET_RADAR				243
+#define WLC_SET_SPECT_MANAGMENT			244
+#define WLC_GET_SPECT_MANAGMENT			245
+#define WLC_WDS_GET_REMOTE_HWADDR		246	/* handled in wl_linux.c/wl_vx.c */
+#define WLC_SET_CS_SCAN_TIMER			248
+#define WLC_GET_CS_SCAN_TIMER			249
+#define WLC_SEND_PWR_CONSTRAINT			254
+#define WLC_CURRENT_PWR				256
+#define WLC_GET_CHANNELS_IN_COUNTRY		260
+#define WLC_GET_COUNTRY_LIST			261
+#define WLC_GET_VAR				262	/* get value of named variable */
+#define WLC_SET_VAR				263	/* set named variable to value */
+#define WLC_NVRAM_GET				264	/* deprecated */
+#define WLC_NVRAM_SET				265
+#define WLC_SET_WSEC_PMK			268
+#define WLC_GET_AUTH_MODE			269
+#define WLC_SET_AUTH_MODE			270
+#define WLC_NDCONFIG_ITEM			273	/* currently handled in wl_oid.c */
+#define WLC_NVOTPW				274
+#define WLC_OTPW				275
+#define WLC_SET_LOCALE				278
+#define WLC_LAST				279	/* do not change - use get_var/set_var */
+
+/*
+ * Minor kludge alert:
+ * Duplicate a few definitions that irelay requires from epiioctl.h here
+ * so caller doesn't have to include this file and epiioctl.h .
+ * If this grows any more, it would be time to move these irelay-specific
+ * definitions out of the epiioctl.h and into a separate driver common file.
+ */
+#ifndef EPICTRL_COOKIE
+#define EPICTRL_COOKIE		0xABADCEDE
+#endif
+
+/* vx wlc ioctl's offset */
+#define CMN_IOCTL_OFF 0x180
+
+/*
+ * custom OID support
+ *
+ * 0xFF - implementation specific OID
+ * 0xE4 - first byte of Broadcom PCI vendor ID
+ * 0x14 - second byte of Broadcom PCI vendor ID
+ * 0xXX - the custom OID number
+ */
+
+/* begin 0x1f values beyond the start of the ET driver range. */
+#define WL_OID_BASE		0xFFE41420
+
+/* NDIS overrides */
+#define OID_WL_GETINSTANCE	(WL_OID_BASE + WLC_GET_INSTANCE)
+#define OID_WL_NDCONFIG_ITEM (WL_OID_BASE + WLC_NDCONFIG_ITEM)
+
+#define WL_DECRYPT_STATUS_SUCCESS	1
+#define WL_DECRYPT_STATUS_FAILURE	2
+#define WL_DECRYPT_STATUS_UNKNOWN	3
+
+/* allows user-mode app to poll the status of USB image upgrade */
+#define WLC_UPGRADE_SUCCESS			0
+#define WLC_UPGRADE_PENDING			1
+
+#ifdef CONFIG_USBRNDIS_RETAIL
+/* struct passed in for WLC_NDCONFIG_ITEM */
+typedef struct {
+	char *name;
+	void *param;
+} ndconfig_item_t;
+#endif
+
+/* Bit masks for radio disabled status - returned by WL_GET_RADIO */
+#define WL_RADIO_SW_DISABLE		(1<<0)
+#define WL_RADIO_HW_DISABLE		(1<<1)
+#define WL_RADIO_MPC_DISABLE		(1<<2)
+#define WL_RADIO_COUNTRY_DISABLE	(1<<3)	/* some countries don't support any channel */
+
+/* Override bit for WLC_SET_TXPWR.  if set, ignore other level limits */
+#define WL_TXPWR_OVERRIDE	(1<<31)
+
+/* "diag" iovar argument and error code */
+#define WL_DIAG_INTERRUPT			1	/* d11 loopback interrupt test */
+#define WL_DIAG_MEMORY				3	/* d11 memory test */
+#define WL_DIAG_LED				4	/* LED test */
+#define WL_DIAG_REG				5	/* d11/phy register test */
+#define WL_DIAG_SROM				6	/* srom read/crc test */
+#define WL_DIAG_DMA				7	/* DMA test */
+
+#define WL_DIAGERR_SUCCESS			0
+#define WL_DIAGERR_FAIL_TO_RUN			1	/* unable to run requested diag */
+#define WL_DIAGERR_NOT_SUPPORTED		2	/* diag requested is not supported */
+#define WL_DIAGERR_INTERRUPT_FAIL		3	/* loopback interrupt test failed */
+#define WL_DIAGERR_LOOPBACK_FAIL		4	/* loopback data test failed */
+#define WL_DIAGERR_SROM_FAIL			5	/* srom read failed */
+#define WL_DIAGERR_SROM_BADCRC			6	/* srom crc failed */
+#define WL_DIAGERR_REG_FAIL			7	/* d11/phy register test failed */
+#define WL_DIAGERR_MEMORY_FAIL			8	/* d11 memory test failed */
+#define WL_DIAGERR_NOMEM			9	/* diag test failed due to no memory */
+#define WL_DIAGERR_DMA_FAIL			10	/* DMA test failed */
+
+/* band types */
+#define	WLC_BAND_AUTO		0	/* auto-select */
+#define	WLC_BAND_5G		1	/* 5 Ghz */
+#define	WLC_BAND_2G		2	/* 2.4 Ghz */
+#define	WLC_BAND_ALL		3	/* all bands */
+
+/* phy types (returned by WLC_GET_PHYTPE) */
+#define	WLC_PHY_TYPE_A		0
+#define	WLC_PHY_TYPE_B		1
+#define	WLC_PHY_TYPE_G		2
+#define	WLC_PHY_TYPE_N		4
+#define	WLC_PHY_TYPE_NULL	0xf
+
+/* MAC list modes */
+#define WLC_MACMODE_DISABLED	0	/* MAC list disabled */
+#define WLC_MACMODE_DENY	1	/* Deny specified (i.e. allow unspecified) */
+#define WLC_MACMODE_ALLOW	2	/* Allow specified (i.e. deny unspecified) */
+
+/*
+ *
+ */
+#define GMODE_LEGACY_B		0
+#define GMODE_AUTO		1
+#define GMODE_ONLY		2
+#define GMODE_B_DEFERRED	3
+#define GMODE_PERFORMANCE	4
+#define GMODE_LRS		5
+#define GMODE_MAX		6
+
+/* values for PLCPHdr_override */
+#define WLC_PLCP_AUTO	-1
+#define WLC_PLCP_SHORT	0
+#define WLC_PLCP_LONG	1
+
+/* values for g_protection_override and n_protection_override */
+#define WLC_PROTECTION_AUTO		-1
+#define WLC_PROTECTION_OFF		0
+#define WLC_PROTECTION_ON		1
+
+/* values for g_protection_control and n_protection_control */
+#define WLC_PROTECTION_CTL_OFF		0
+#define WLC_PROTECTION_CTL_LOCAL	1
+#define WLC_PROTECTION_CTL_OVERLAP	2
+
+/* deprecated const names for g_protection_override */
+#define WLC_G_PROTECTION_AUTO		WLC_PROTECTION_AUTO
+#define WLC_G_PROTECTION_OFF		WLC_PROTECTION_OFF
+#define WLC_G_PROTECTION_ON		WLC_PROTECTION_ON
+
+/* deprecated const names for g_protection_control */
+#define WLC_G_PROTECTION_CTL_OFF	WLC_PROTECTION_CTL_OFF
+#define WLC_G_PROTECTION_CTL_LOCAL	WLC_PROTECTION_CTL_LOCAL
+#define WLC_G_PROTECTION_CTL_OVERLAP	WLC_PROTECTION_CTL_OVERLAP
+
+/* deprecated const names for get/set g_protection_control */
+#define WLC_GET_GMODE_PROTECTION_CONTROL	WLC_GET_PROTECTION_CONTROL
+#define WLC_SET_GMODE_PROTECTION_CONTROL	WLC_SET_PROTECTION_CONTROL
+
+/* values for n_protection */
+#define WLC_N_PROTECTION_OFF		0
+#define WLC_N_PROTECTION_MIXEDMODE	1
+#define WLC_N_PROTECTION_CTS		2
+
+/* values for n_preamble_type */
+#define WLC_N_PREAMBLE_MIXEDMODE	0
+#define WLC_N_PREAMBLE_GF		1
+
+/* Values for PM */
+#define PM_OFF	0
+#define PM_MAX	1
+#define PM_FAST 2
+
+
+
+typedef struct {
+	int npulses; 	/* required number of pulses at n * t_int */
+	int ncontig; 	/* required number of pulses at t_int */
+	int min_pw; 	/* minimum pulse width (20 MHz clocks) */
+	int max_pw; 	/* maximum pulse width (20 MHz clocks) */
+	uint16 thresh0;	/* Radar detection, thresh 0 */
+	uint16 thresh1;	/* Radar detection, thresh 1 */
+	int npulses_lp;  /* Radar detection, minimum long pulses */
+	int min_pw_lp; /* Minimum pulsewidth for long pulses */
+	int max_pw_lp; /* Maximum pulsewidth for long pulses */
+	int min_fm_lp; /* Minimum fm for long pulses */
+	int max_deltat_lp;  /* Maximum deltat for long pulses */
+	int min_deltat; /* Minimum spacing between pulses */
+} wl_radar_args_t;
+
+/* radar iovar SET defines */
+#define WL_RADAR_DETECTOR_OFF		0	/* radar detector off */
+#define WL_RADAR_DETECTOR_ON		1	/* radar detector on */
+#define WL_RADAR_SIMULATED		2	/* force radar detector to declare
+						 * detection once
+						 */
+
+/* dfs_status iovar-related defines */
+
+/* cac - channel availability check,
+ * ism - in-service monitoring
+ * csa - channel switching announcement
+ */
+
+/* cac state values */
+#define WL_DFS_CACSTATE_IDLE		0	/* state for operating in non-radar channel */
+#define	WL_DFS_CACSTATE_PREISM_CAC	1	/* CAC in progress */
+#define WL_DFS_CACSTATE_ISM		2	/* ISM in progress */
+#define WL_DFS_CACSTATE_CSA		3	/* csa */
+#define WL_DFS_CACSTATE_POSTISM_CAC	4	/* ISM CAC */
+#define WL_DFS_CACSTATE_PREISM_OOC	5	/* PREISM OOC */
+#define WL_DFS_CACSTATE_POSTISM_OOC	6	/* POSTISM OOC */
+#define WL_DFS_CACSTATES		7	/* this many states exist */
+
+/* data structure used in 'dfs_status' wl interface, which is used to query dfs status */
+typedef struct {
+	uint state;		/* noted by WL_DFS_CACSTATE_XX. */
+	uint duration;		/* time spent in ms in state. */
+	/* as dfs enters ISM state, it removes the operational channel from quiet channel
+	 * list and notes the channel in channel_cleared. set to 0 if no channel is cleared
+	 */
+	chanspec_t chanspec_cleared;
+	/* chanspec cleared used to be a uint, add another to uint16 to maintain size */
+	uint16 pad;
+} wl_dfs_status_t;
+
+#define NUM_PWRCTRL_RATES 12
+
+typedef struct tx_inst_power {
+} tx_inst_power_t;
+
+
+/* regulatory enforcement levels */
+#define SPECT_MNGMT_OFF			0		/* both 11h and 11d disabled */
+#define SPECT_MNGMT_LOOSE_11H		1		/* allow non-11h APs in scan lists */
+#define SPECT_MNGMT_STRICT_11H		2		/* prune out non-11h APs from scan list */
+#define SPECT_MNGMT_STRICT_11D		3		/* switch to 802.11D mode */
+/* SPECT_MNGMT_LOOSE_11H_D - same as SPECT_MNGMT_LOOSE with the exception that Country IE
+ * adoption is done irregardless of capability-spectrum_management
+ */
+#define SPECT_MNGMT_LOOSE_11H_D		4		/* operation defined above */
+
+#define WL_CHAN_VALID_HW	(1 << 0)	/* valid with current HW */
+#define WL_CHAN_VALID_SW	(1 << 1)	/* valid with current country setting */
+#define WL_CHAN_BAND_5G		(1 << 2)	/* 5GHz-band channel */
+#define WL_CHAN_RADAR		(1 << 3)	/* radar sensitive  channel */
+#define WL_CHAN_INACTIVE	(1 << 4)	/* temporarily inactive due to radar */
+#define WL_CHAN_PASSIVE		(1 << 5)	/* channel is in passive mode */
+#define WL_CHAN_RESTRICTED	(1 << 6)	/* restricted use channel */
+
+/* BTC mode used by "btc_mode" iovar */
+#define	WL_BTC_DISABLE		0	/* disable BT coexistance */
+#define WL_BTC_ENABLE		1	/* enable BT coexistance */
+#define WL_BTC_PREMPT		2	/* enable BT coexistance and BT pre-emption */
+
+#define WL_MPC_VAL		0x00400000
+#define WL_APSTA_VAL		0x00800000
+#define WL_DFS_VAL		0x01000000
+#define WL_BA_VAL		0x02000000
+#define WL_NITRO_VAL		0x04000000
+#define WL_CAC_VAL		0x08000000
+#define WL_AMSDU_VAL		0x10000000
+#define WL_AMPDU_VAL		0x20000000
+
+/* max # of leds supported by GPIO (gpio pin# == led index#) */
+#define	WL_LED_NUMGPIO		16	/* gpio 0-15 */
+
+/* led per-pin behaviors */
+#define	WL_LED_OFF		0		/* always off */
+#define	WL_LED_ON		1		/* always on */
+#define	WL_LED_ACTIVITY		2		/* activity */
+#define	WL_LED_RADIO		3		/* radio enabled */
+#define	WL_LED_ARADIO		4		/* 5  Ghz radio enabled */
+#define	WL_LED_BRADIO		5		/* 2.4Ghz radio enabled */
+#define	WL_LED_BGMODE		6		/* on if gmode, off if bmode */
+#define	WL_LED_WI1		7		
+#define	WL_LED_WI2		8		
+#define	WL_LED_WI3		9		
+#define	WL_LED_ASSOC		10		/* associated state indicator */
+#define	WL_LED_INACTIVE		11		/* null behavior (clears default behavior) */
+#define	WL_LED_NUMBEHAVIOR	12
+
+/* led behavior numeric value format */
+#define	WL_LED_BEH_MASK		0x7f		/* behavior mask */
+#define	WL_LED_AL_MASK		0x80		/* activelow (polarity) bit */
+
+/* max # of channels returnd by the get valid channels iovar */
+#define WL_NUMCHANSPECS		100
+
+/* WDS link local endpoint WPA role */
+#define WL_WDS_WPA_ROLE_AUTH	0	/* authenticator */
+#define WL_WDS_WPA_ROLE_SUP	1	/* supplicant */
+#define WL_WDS_WPA_ROLE_AUTO	255	/* auto, based on mac addr value */
+
+/* number of bytes needed to define a 128-bit mask for MAC event reporting */
+#define WL_EVENTING_MASK_LEN	16
+
+/* Structures and constants used for "vndr_ie" IOVar interface */
+#define VNDR_IE_CMD_LEN		4	/* length of the set command string:
+					 * "add", "del" (+ NULL)
+					 */
+
+/* 802.11 Mgmt Packet flags */
+#define VNDR_IE_BEACON_FLAG	0x1
+#define VNDR_IE_PRBRSP_FLAG	0x2
+#define VNDR_IE_ASSOCRSP_FLAG	0x4
+#define VNDR_IE_AUTHRSP_FLAG	0x8
+
+#define VNDR_IE_INFO_HDR_LEN	(sizeof(uint32))
+
+typedef struct {
+	uint32 pktflag;			/* bitmask indicating which packet(s) contain this IE */
+	vndr_ie_t vndr_ie_data;		/* vendor IE data */
+} vndr_ie_info_t;
+
+typedef struct {
+	int iecount;			/* number of entries in the vndr_ie_list[] array */
+	vndr_ie_info_t vndr_ie_list[1];	/* variable size list of vndr_ie_info_t structs */
+} vndr_ie_buf_t;
+
+typedef struct {
+	char cmd[VNDR_IE_CMD_LEN];	/* vndr_ie IOVar set command : "add", "del" + NULL */
+	vndr_ie_buf_t vndr_ie_buffer;	/* buffer containing Vendor IE list information */
+} vndr_ie_setbuf_t;
+
+/* join target preference types */
+#define WL_JOIN_PREF_RSSI	1	/* by RSSI, mandatory */
+#define WL_JOIN_PREF_WPA	2	/* by akm and ciphers, optional, RSN and WPA as values */
+#define WL_JOIN_PREF_BAND	3	/* by 802.11 band, optional, WLC_BAND_XXXX as values */
+
+/* band preference */
+#define WLJP_BAND_ASSOC_PREF	255	/* use assoc preference settings */
+					/* others use WLC_BAND_XXXX as values */
+
+/* any multicast cipher suite */
+#define WL_WPA_ACP_MCS_ANY	"\x00\x00\x00\x00"
+
+struct tsinfo_arg {
+	uint8 octets[3];
+};
+
+#if !defined(__GNUC__)
+#pragma pack(pop)
+#endif
+
+#define	NFIFO			6	/* # tx/rx fifopairs */
+
+#define	WL_CNT_T_VERSION	1	/* current version of wl_cnt_t struct */
+
+typedef struct {
+	uint16	version;	/* see definition of WL_CNT_T_VERSION */
+	uint16	length;		/* length of entire structure */
+
+	/* transmit stat counters */
+	uint32	txframe;	/* tx data frames */
+	uint32	txbyte;		/* tx data bytes */
+	uint32	txretrans;	/* tx mac retransmits */
+	uint32	txerror;	/* tx data errors (derived: sum of others) */
+	uint32	txctl;		/* tx management frames */
+	uint32	txprshort;	/* tx short preamble frames */
+	uint32	txserr;		/* tx status errors */
+	uint32	txnobuf;	/* tx out of buffers errors */
+	uint32	txnoassoc;	/* tx discard because we're not associated */
+	uint32	txrunt;		/* tx runt frames */
+	uint32	txchit;		/* tx header cache hit (fastpath) */
+	uint32	txcmiss;	/* tx header cache miss (slowpath) */
+
+	/* transmit chip error counters */
+	uint32	txuflo;		/* tx fifo underflows */
+	uint32	txphyerr;	/* tx phy errors (indicated in tx status) */
+	uint32	txphycrs;	
+
+	/* receive stat counters */
+	uint32	rxframe;	/* rx data frames */
+	uint32	rxbyte;		/* rx data bytes */
+	uint32	rxerror;	/* rx data errors (derived: sum of others) */
+	uint32	rxctl;		/* rx management frames */
+	uint32	rxnobuf;	/* rx out of buffers errors */
+	uint32	rxnondata;	/* rx non data frames in the data channel errors */
+	uint32	rxbadds;	/* rx bad DS errors */
+	uint32	rxbadcm;	/* rx bad control or management frames */
+	uint32	rxfragerr;	/* rx fragmentation errors */
+	uint32	rxrunt;		/* rx runt frames */
+	uint32	rxgiant;	/* rx giant frames */
+	uint32	rxnoscb;	/* rx no scb error */
+	uint32	rxbadproto;	/* rx invalid frames */
+	uint32	rxbadsrcmac;	/* rx frames with Invalid Src Mac */
+	uint32	rxbadda;	/* rx frames tossed for invalid da */
+	uint32	rxfilter;	/* rx frames filtered out */
+
+	/* receive chip error counters */
+	uint32	rxoflo;		/* rx fifo overflow errors */
+	uint32	rxuflo[NFIFO];	/* rx dma descriptor underflow errors */
+
+	uint32	d11cnt_txrts_off;	/* d11cnt txrts value when reset d11cnt */
+	uint32	d11cnt_rxcrc_off;	/* d11cnt rxcrc value when reset d11cnt */
+	uint32	d11cnt_txnocts_off;	/* d11cnt txnocts value when reset d11cnt */
+
+	/* misc counters */
+	uint32	dmade;		/* tx/rx dma descriptor errors */
+	uint32	dmada;		/* tx/rx dma data errors */
+	uint32	dmape;		/* tx/rx dma descriptor protocol errors */
+	uint32	reset;		/* reset count */
+	uint32	tbtt;		/* cnts the TBTT int's */
+	uint32	txdmawar;	
+	uint32	pkt_callback_reg_fail;	/* callbacks register failure */
+
+	/* MAC counters: 32-bit version of d11.h's macstat_t */
+	uint32	txallfrm;	/* total number of frames sent, incl. Data, ACK, RTS, CTS,
+				 * Control Management (includes retransmissions)
+				 */
+	uint32	txrtsfrm;	/* number of RTS sent out by the MAC */
+	uint32	txctsfrm;	/* number of CTS sent out by the MAC */
+	uint32	txackfrm;	/* number of ACK frames sent out */
+	uint32	txdnlfrm;	/* Not used */
+	uint32	txbcnfrm;	/* beacons transmitted */
+	uint32	txfunfl[8];	/* per-fifo tx underflows */
+	uint32	txtplunfl;	/* Template underflows (mac was too slow to transmit ACK/CTS
+				 * or BCN)
+				 */
+	uint32	txphyerror;	/* Transmit phy error, type of error is reported in tx-status for
+				 * driver enqueued frames
+				 */
+	uint32	rxfrmtoolong;	/* Received frame longer than legal limit (2346 bytes) */
+	uint32	rxfrmtooshrt;	/* Received frame did not contain enough bytes for its frame type */
+	uint32	rxinvmachdr;	/* Either the protocol version != 0 or frame type not
+				 * data/control/management
+				 */
+	uint32	rxbadfcs;	/* number of frames for which the CRC check failed in the MAC */
+	uint32	rxbadplcp;	/* parity check of the PLCP header failed */
+	uint32	rxcrsglitch;	/* PHY was able to correlate the preamble but not the header */
+	uint32	rxstrt;		/* Number of received frames with a good PLCP
+				 * (i.e. passing parity check)
+				 */
+	uint32	rxdfrmucastmbss; /* Number of received DATA frames with good FCS and matching RA */
+	uint32	rxmfrmucastmbss; /* number of received mgmt frames with good FCS and matching RA */
+	uint32	rxcfrmucast;	/* number of received CNTRL frames with good FCS and matching RA */
+	uint32	rxrtsucast;	/* number of unicast RTS addressed to the MAC (good FCS) */
+	uint32	rxctsucast;	/* number of unicast CTS addressed to the MAC (good FCS) */
+	uint32	rxackucast;	/* number of ucast ACKS received (good FCS) */
+	uint32	rxdfrmocast;	/* number of received DATA frames (good FCS and not matching RA) */
+	uint32	rxmfrmocast;	/* number of received MGMT frames (good FCS and not matching RA) */
+	uint32	rxcfrmocast;	/* number of received CNTRL frame (good FCS and not matching RA) */
+	uint32	rxrtsocast;	/* number of received RTS not addressed to the MAC */
+	uint32	rxctsocast;	/* number of received CTS not addressed to the MAC */
+	uint32	rxdfrmmcast;	/* number of RX Data multicast frames received by the MAC */
+	uint32	rxmfrmmcast;	/* number of RX Management multicast frames received by the MAC */
+	uint32	rxcfrmmcast;	/* number of RX Control multicast frames received by the MAC
+				 * (unlikely to see these)
+				 */
+	uint32	rxbeaconmbss;	/* beacons received from member of BSS */
+	uint32	rxdfrmucastobss; /* number of unicast frames addressed to the MAC from
+				  * other BSS (WDS FRAME)
+				  */
+	uint32	rxbeaconobss;	/* beacons received from other BSS */
+	uint32	rxrsptmout;	/* Number of response timeouts for transmitted frames
+				 * expecting a response
+				 */
+	uint32	bcntxcancl;	/* transmit beacons canceled due to receipt of beacon (IBSS) */
+	uint32	rxf0ovfl;	/* Number of receive fifo 0 overflows */
+	uint32	rxf1ovfl;	/* Number of receive fifo 1 overflows (obsolete) */
+	uint32	rxf2ovfl;	/* Number of receive fifo 2 overflows (obsolete) */
+	uint32	txsfovfl;	/* Number of transmit status fifo overflows (obsolete) */
+	uint32	pmqovfl;	/* Number of PMQ overflows */
+	uint32	rxcgprqfrm;	/* Number of received Probe requests that made it into
+				 * the PRQ fifo
+				 */
+	uint32	rxcgprsqovfl;	/* Rx Probe Request Que overflow in the AP */
+	uint32	txcgprsfail;	/* Tx Probe Response Fail. AP sent probe response but did
+				 * not get ACK
+				 */
+	uint32	txcgprssuc;	/* Tx Probe Response Success (ACK was received) */
+	uint32	prs_timeout;	/* Number of probe requests that were dropped from the PRQ
+				 * fifo because a probe response could not be sent out within
+				 * the time limit defined in M_PRS_MAXTIME
+				 */
+	uint32	rxnack;		/* Number of NACKS received (Afterburner) */
+	uint32	frmscons;	/* Number of frames completed without transmission because of an
+				 * Afterburner re-queue
+				 */
+	uint32	txnack;		/* Number of NACKs transmitted (Afterburner) */
+	uint32	txglitch_nack;	/* obsolete */
+	uint32	txburst;	/* obsolete */
+
+	/* 802.11 MIB counters, pp. 614 of 802.11 reaff doc. */
+	uint32	txfrag;		/* dot11TransmittedFragmentCount */
+	uint32	txmulti;	/* dot11MulticastTransmittedFrameCount */
+	uint32	txfail;		/* dot11FailedCount */
+	uint32	txretry;	/* dot11RetryCount */
+	uint32	txretrie;	/* dot11MultipleRetryCount */
+	uint32	rxdup;		/* dot11FrameduplicateCount */
+	uint32	txrts;		/* dot11RTSSuccessCount */
+	uint32	txnocts;	/* dot11RTSFailureCount */
+	uint32	txnoack;	/* dot11ACKFailureCount */
+	uint32	rxfrag;		/* dot11ReceivedFragmentCount */
+	uint32	rxmulti;	/* dot11MulticastReceivedFrameCount */
+	uint32	rxcrc;		/* dot11FCSErrorCount */
+	uint32	txfrmsnt;	/* dot11TransmittedFrameCount (bogus MIB?) */
+	uint32	rxundec;	/* dot11WEPUndecryptableCount */
+
+	/* WPA2 counters (see rxundec for DecryptFailureCount) */
+	uint32	tkipmicfaill;	/* TKIPLocalMICFailures */
+	uint32	tkipcntrmsr;	/* TKIPCounterMeasuresInvoked */
+	uint32	tkipreplay;	/* TKIPReplays */
+	uint32	ccmpfmterr;	/* CCMPFormatErrors */
+	uint32	ccmpreplay;	/* CCMPReplays */
+	uint32	ccmpundec;	/* CCMPDecryptErrors */
+	uint32	fourwayfail;	/* FourWayHandshakeFailures */
+	uint32	wepundec;	/* dot11WEPUndecryptableCount */
+	uint32	wepicverr;	/* dot11WEPICVErrorCount */
+	uint32	decsuccess;	/* DecryptSuccessCount */
+	uint32	tkipicverr;	/* TKIPICVErrorCount */
+	uint32	wepexcluded;	/* dot11WEPExcludedCount */
+
+	uint32	txchanrej;	/* Tx frames suppressed due to channel rejection */
+	uint32	psmwds;		/* Count PSM watchdogs */
+	uint32	phywatchdog;	/* Count Phy lockups */
+} wl_cnt_t;
+
+#define WL_WME_CNT_VERSION	1	/* current version of wl_wme_cnt_t */
+
+typedef struct {
+	uint32 packets;
+	uint32 bytes;
+} wl_traffic_stats_t;
+
+typedef struct {
+	uint16	version;	/* see definition of WL_CNT_T_VERSION */
+	uint16	length;		/* length of entire structure */
+
+	wl_traffic_stats_t tx[AC_COUNT];	/* Packets transmitted */
+	wl_traffic_stats_t tx_failed[AC_COUNT];	/* Packets dropped or failed to transmit */
+	wl_traffic_stats_t rx[AC_COUNT];	/* Packets received */
+	wl_traffic_stats_t rx_failed[AC_COUNT];	/* Packets failed to receive */
+
+	wl_traffic_stats_t forward[AC_COUNT];	/* Packets forwarded by AP */
+
+	wl_traffic_stats_t tx_expired[AC_COUNT];	/* packets dropped due to lifetime expiry */
+
+} wl_wme_cnt_t;
+
+#ifdef WLBA
+
+#define	WLC_BA_CNT_VERSION	1	/* current version of wlc_ba_cnt_t */
+
+/* block ack related stats */
+typedef struct wlc_ba_cnt {
+	uint16	version;	/* WLC_BA_CNT_VERSION */
+	uint16	length;		/* length of entire structure */
+
+	/* transmit stat counters */
+	uint32 txpdu;		/* pdus sent */
+	uint32 txsdu;		/* sdus sent */
+	uint32 txfc;		/* tx side flow controlled packets */
+	uint32 txfci;		/* tx side flow control initiated */
+	uint32 txretrans;	/* retransmitted pdus */
+	uint32 txbatimer;	/* ba resend due to timer */
+	uint32 txdrop;		/* dropped packets */
+	uint32 txaddbareq;	/* addba req sent */
+	uint32 txaddbaresp;	/* addba resp sent */
+	uint32 txdelba;		/* delba sent */
+	uint32 txba;		/* ba sent */
+	uint32 txbar;		/* bar sent */
+	uint32 txpad[4];	/* future */
+
+	/* receive side counters */
+	uint32 rxpdu;		/* pdus recd */
+	uint32 rxqed;		/* pdus buffered before sending up */
+	uint32 rxdup;		/* duplicate pdus */
+	uint32 rxnobuf;		/* pdus discarded due to no buf */
+	uint32 rxaddbareq;	/* addba req recd */
+	uint32 rxaddbaresp;	/* addba resp recd */
+	uint32 rxdelba;		/* delba recd */
+	uint32 rxba;		/* ba recd */
+	uint32 rxbar;		/* bar recd */
+	uint32 rxinvba;		/* invalid ba recd */
+	uint32 rxbaholes;	/* ba recd with holes */
+	uint32 rxunexp;		/* unexpected packets */
+	uint32 rxpad[4];	/* future */
+} wlc_ba_cnt_t;
+#endif /* WLBA */
+
+/* structure for per-tid ampdu control */
+struct ampdu_tid_control {
+	uint8 tid;			/* tid */
+	uint8 enable;			/* enable/disable */
+};
+
+/* structure for addts arguments */
+/* For ioctls that take a list of TSPEC */
+struct tslist {
+	int count;			/* number of tspecs */
+	struct tsinfo_arg tsinfo[1];	/* variable length array of tsinfo */
+};
+
+/* structure for addts/delts arguments */
+typedef struct tspec_arg {
+	uint16 version;			/* see definition of TSPEC_ARG_VERSION */
+	uint16 length;			/* length of entire structure */
+	uint flag;			/* bit field */
+	/* TSPEC Arguments */
+	struct tsinfo_arg tsinfo;	/* TS Info bit field */
+	uint16 nom_msdu_size;		/* (Nominal or fixed) MSDU Size (bytes) */
+	uint16 max_msdu_size;		/* Maximum MSDU Size (bytes) */
+	uint min_srv_interval;		/* Minimum Service Interval (us) */
+	uint max_srv_interval;		/* Maximum Service Interval (us) */
+	uint inactivity_interval;	/* Inactivity Interval (us) */
+	uint suspension_interval;	/* Suspension Interval (us) */
+	uint srv_start_time;		/* Service Start Time (us) */
+	uint min_data_rate;		/* Minimum Data Rate (bps) */
+	uint mean_data_rate;		/* Mean Data Rate (bps) */
+	uint peak_data_rate;		/* Peak Data Rate (bps) */
+	uint max_burst_size;		/* Maximum Burst Size (bytes) */
+	uint delay_bound;		/* Delay Bound (us) */
+	uint min_phy_rate;		/* Minimum PHY Rate (bps) */
+	uint16 surplus_bw;		/* Surplus Bandwidth Allowance Factor */
+	uint16 medium_time;		/* Medium Time (32 us/s periods) */
+} tspec_arg_t;
+
+/* current version of wl_tspec_arg_t struct */
+#define	TSPEC_ARG_VERSION	1	/* current version of wl_tspec_arg_t struct */
+#define TSPEC_ARG_LENGTH	55	/* argment length from tsinfo to medium_time */
+
+/* define for flag */
+#define TSPEC_PENDING		0	/* TSPEC pending */
+#define TSPEC_ACCEPTED		1	/* TSPEC accepted */
+#define TSPEC_REJECTED		2	/* TSPEC rejected */
+#define TSPEC_UNKNOWN		3	/* TSPEC unknown */
+#define TSPEC_STATUS_MASK	7	/* TSPEC status mask */
+
+
+/* Software feature flag defines used by wlfeatureflag */
+#define WL_SWFL_ABBFL		0x0001 /* Allow Afterburner on systems w/o hardware BFL */
+#define WL_SWFL_ABENCORE	0x0002 /* Allow AB on non-4318E chips */
+
+#define WL_LIFETIME_MAX 0xFFFF /* Max value in ms */
+
+/* Packet lifetime configuration per ac */
+typedef struct wl_lifetime {
+	uint32 ac;	        /* access class */
+	uint32 lifetime;    /* Packet lifetime value in ms */
+} wl_lifetime_t;
+
+#endif /* _wlioctl_h_ */
diff --git a/package/broadcom-wl/src/include/wlutils.h b/package/broadcom-wl/src/include/wlutils.h
new file mode 100644
index 000000000..a5aa1fd66
--- /dev/null
+++ b/package/broadcom-wl/src/include/wlutils.h
@@ -0,0 +1,102 @@
+/*
+ * Broadcom wireless network adapter utility functions
+ *
+ * Copyright 2006, Broadcom Corporation
+ * All Rights Reserved.
+ * 
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ *
+ * $Id: wlutils.h,v 1.1.1.12 2006/02/27 03:43:20 honor Exp $
+ */
+
+#ifndef _wlutils_h_
+#define _wlutils_h_
+
+#include <typedefs.h>
+#include <wlioctl.h>
+
+/*
+ * Pass a wlioctl request to the specified interface.
+ * @param	name	interface name
+ * @param	cmd	WLC_GET_MAGIC <= cmd < WLC_LAST
+ * @param	buf	buffer for passing in and/or receiving data
+ * @param	len	length of buf
+ * @return	>= 0 if successful or < 0 otherwise
+ */
+extern int wl_ioctl(char *name, int cmd, void *buf, int len);
+
+/*
+ * Probe the specified interface.
+ * @param	name	interface name
+ * @return	>= 0 if a Broadcom wireless device or < 0 otherwise
+ */
+extern int wl_probe(char *name);
+
+extern int wl_iovar_set(char *ifname, char *iovar, void *param, int paramlen);
+extern int wl_iovar_get(char *ifname, char *iovar, void *bufptr, int buflen);
+/*
+ * Set/Get named variable.
+ * @param	ifname		interface name
+ * @param	iovar		variable name
+ * @param	param		input param value/buffer
+ * @param	paramlen	input param value/buffer length
+ * @param	bufptr		io buffer
+ * @param	buflen		io buffer length
+ * @param	val		val or val pointer for int routines
+ * @return	success == 0, failure != 0
+ */
+/*
+ * set named driver variable to int value
+ * calling example: wl_iovar_setint(ifname, "arate", rate)
+*/
+static inline int
+wl_iovar_setint(char *ifname, char *iovar, int val)
+{
+	return wl_iovar_set(ifname, iovar, &val, sizeof(val));
+}
+
+/*
+ * get named driver variable to int value and return error indication
+ * calling example: wl_iovar_getint(ifname, "arate", &rate)
+ */
+static inline int
+wl_iovar_getint(char *ifname, char *iovar, int *val)
+{
+	return wl_iovar_get(ifname, iovar, val, sizeof(int));
+}
+
+/*
+ * Set/Get named variable indexed by BSS Configuration
+ * @param	ifname		interface name
+ * @param	iovar		variable name
+ * @param	bssidx		bsscfg index
+ * @param	param		input param value/buffer
+ * @param	paramlen	input param value/buffer length
+ * @param	bufptr		io buffer
+ * @param	buflen		io buffer length
+ * @param	val		val or val pointer for int routines
+ * @return	success == 0, failure != 0
+ */
+extern int wl_bssiovar_get(char *ifname, char *iovar, int bssidx, void *outbuf, int len);
+extern int wl_bssiovar_set(char *ifname, char *iovar, int bssidx, void *param, int paramlen);
+/*
+ * set named & bss indexed driver variable to int value
+ */
+static inline int
+wl_bssiovar_setint(char *ifname, char *iovar, int bssidx, int val)
+{
+	return wl_bssiovar_set(ifname, iovar, bssidx, &val, sizeof(int));
+}
+
+static inline int
+wl_bssiovar_getint(char *ifname, char *iovar, int bssidx, int *val)
+{
+	return wl_bssiovar_get(ifname, iovar, bssidx, val, sizeof(int));
+}
+
+extern int wl_bssiovar_setint(char *ifname, char *iovar, int bssidx, int val);
+
+#endif /* _wlutils_h_ */