move wificonf and nvram stuff back to package/, remove build_mipsel/root, run install part of package/ for every board/kernel - fixes dependency mess

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@1540 3c298f89-4303-0410-b956-a3cf2f4a3e73

11 files changed, 0 insertions, 1955 deletions

diff --git a/openwrt/target/linux/package/nvram/src/Makefile b/openwrt/target/linux/package/nvram/src/Makefile
deleted file mode 100644
index 376c2b7de..000000000
--- a/openwrt/target/linux/package/nvram/src/Makefile
+++ /dev/null
@@ -1,22 +0,0 @@
-# $Id$
-
-EXTRA_CFLAGS := -c -I. -I../include
-LIBSHARED_OBJS := shutils.o wl.o wl_linux.o defaults.o linux_timer.o
-LIBNVRAM_OBJS := nvram_linux.o nvram_convert.o
-
-all: libshared.so libnvram.so nvram
-
-%.o: %.c
-	$(CC) $(CFLAGS) $(EXTRA_CFLAGS) -o $@ $^
-
-libshared.so: $(LIBSHARED_OBJS)
-	$(CC) -shared -o $@ $^
-
-libnvram.so: $(LIBNVRAM_OBJS)
-	$(CC) -shared -o $@ $^
-
-nvram: main.o
-	$(CC) -o $@ $^ -L. -lnvram
-
-clean:
-	rm -f *.o *.so nvram
diff --git a/openwrt/target/linux/package/nvram/src/bcmtimer.h b/openwrt/target/linux/package/nvram/src/bcmtimer.h
deleted file mode 100644
index 3db9e624f..000000000
--- a/openwrt/target/linux/package/nvram/src/bcmtimer.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * Copyright 2004, Broadcom Corporation
- * All Rights Reserved.
- * 
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- *
- * Low resolution timer interface. Timer handlers may be called 
- * in a deferred manner in a different task context after the 
- * timer expires or in the task context from which the timer
- * was created, depending on the implementation.
- *
- * $Id$
- */
-#ifndef __bcmtimer_h__
-#define __bcmtimer_h__
-
-/* ANSI headers */
-#include <time.h>
-
-/* timer ID */
-typedef unsigned int bcm_timer_module_id;
-typedef unsigned int bcm_timer_id;
-
-/* timer callback */
-typedef void (*bcm_timer_cb)(bcm_timer_id id, int data);
-
-/* OS-independant interfaces, applications should call these functions only */
-int bcm_timer_module_init(int timer_entries, bcm_timer_module_id *module_id);
-int bcm_timer_module_cleanup(bcm_timer_module_id module_id);
-int bcm_timer_module_enable(bcm_timer_module_id module_id, int enable);
-int bcm_timer_create(bcm_timer_module_id module_id, bcm_timer_id *timer_id);
-int bcm_timer_delete(bcm_timer_id timer_id);
-int bcm_timer_gettime(bcm_timer_id timer_id, struct itimerspec *value);
-int bcm_timer_settime(bcm_timer_id timer_id, const struct itimerspec *value);
-int bcm_timer_connect(bcm_timer_id timer_id, bcm_timer_cb func, int data);
-int bcm_timer_cancel(bcm_timer_id timer_id);
-int bcm_timer_change_expirytime(bcm_timer_id timer_id, const struct itimerspec *timer_spec);
-
-#endif	/* #ifndef __bcmtimer_h__ */
diff --git a/openwrt/target/linux/package/nvram/src/defaults.c b/openwrt/target/linux/package/nvram/src/defaults.c
deleted file mode 100644
index 119eaac72..000000000
--- a/openwrt/target/linux/package/nvram/src/defaults.c
+++ /dev/null
@@ -1,179 +0,0 @@
-/*
- * Router default NVRAM values
- *
- * Copyright 2004, Broadcom Corporation
- * All Rights Reserved.
- * 
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- *
- * $Id$
- */
-
-#include <epivers.h>
-#include <string.h>
-#include <bcmnvram.h>
-#include <typedefs.h>
-#include <wlioctl.h>
-
-#define XSTR(s) STR(s)
-#define STR(s) #s
-
-struct nvram_tuple router_defaults[] = {
-	/* OS parameters */
-	{ "os_name", "", 0 },			/* OS name string */
-	{ "os_version", EPI_VERSION_STR, 0 },	/* OS revision */
-	{ "os_date", __DATE__, 0 },		/* OS date */
-
-	/* Miscellaneous parameters */
-	{ "timer_interval", "3600", 0 },	/* Timer interval in seconds */
-	{ "ntp_server", "192.5.41.40 192.5.41.41 133.100.9.2", 0 },		/* NTP server */
-	{ "time_zone", "PST8PDT", 0 },		/* Time zone (GNU TZ format) */
-	{ "log_level", "0", 0 },		/* Bitmask 0:off 1:denied 2:accepted */
-	{ "upnp_enable", "0", 0 },		/* Start UPnP */
-	{ "ezc_enable", "1", 0 },		/* Enable EZConfig updates */
-	{ "ezc_version", "1", 0 },		/* EZConfig version */
-	{ "is_default", "1", 0 },		/* is it default setting: 1:yes 0:no*/
-	{ "os_server", "", 0 },			/* URL for getting upgrades */
-	{ "stats_server", "", 0 },		/* URL for posting stats */
-	{ "console_loglevel", "1", 0 },		/* Kernel panics only */
-
-	/* Big switches */
-	{ "router_disable", "0", 0 },		/* lan_proto=static lan_stp=0 wan_proto=disabled */
-	{ "fw_disable", "0", 0 },		/* Disable firewall (allow new connections from the WAN) */
-
-	{ "log_ipaddr", "", 0 },		/* syslog recipient */
-	
-	/* LAN H/W parameters */
-	{ "lan_ifname", "", 0 },		/* LAN interface name */
-	{ "lan_ifnames", "", 0 },		/* Enslaved LAN interfaces */
-	{ "lan_hwnames", "", 0 },		/* LAN driver names (e.g. et0) */
-	{ "lan_hwaddr", "", 0 },		/* LAN interface MAC address */
-	
-	/* LAN TCP/IP parameters */
-	{ "lan_proto", "dhcp", 0 },		/* [static|dhcp] */
-	{ "lan_ipaddr", "192.168.1.1", 0 },	/* LAN IP address */
-	{ "lan_netmask", "255.255.255.0", 0 },	/* LAN netmask */
-	{ "lan_stp", "0", 0 },			/* LAN spanning tree protocol */
-	{ "lan_wins", "", 0 },			/* x.x.x.x x.x.x.x ... */
-	{ "lan_domain", "", 0 },		/* LAN domain name */
-	{ "lan_lease", "86400", 0 },		/* LAN lease time in seconds */
-
-	/* WAN H/W parameters */
-	{ "wan_ifname", "", 0 },		/* WAN interface name */
-	{ "wan_ifnames", "", 0 },		/* WAN interface names */
-	{ "wan_hwname", "", 0 },		/* WAN driver name (e.g. et1) */
-	{ "wan_hwaddr", "", 0 },		/* WAN interface MAC address */
-	
-	/* WAN TCP/IP parameters */
-	{ "wan_proto", "dhcp", 0 },		/* [static|dhcp|pppoe|disabled] */
-	{ "wan_ipaddr", "0.0.0.0", 0 },		/* WAN IP address */
-	{ "wan_netmask", "0.0.0.0", 0 },	/* WAN netmask */
-	{ "wan_gateway", "0.0.0.0", 0 },	/* WAN gateway */
-	{ "wan_dns", "", 0 },			/* x.x.x.x x.x.x.x ... */
-	{ "wan_wins", "", 0 },			/* x.x.x.x x.x.x.x ... */
-	{ "wan_hostname", "", 0 },		/* WAN hostname */
-	{ "wan_domain", "", 0 },		/* WAN domain name */
-	{ "wan_lease", "86400", 0 },		/* WAN lease time in seconds */
-	
-	/* PPPoE parameters */
-	{ "wan_pppoe_ifname", "", 0 },		/* PPPoE enslaved interface */
-	{ "wan_pppoe_username", "", 0 },	/* PPP username */
-	{ "wan_pppoe_passwd", "", 0 },		/* PPP password */
-	{ "wan_pppoe_idletime", "60", 0 },	/* Dial on demand max idle time (seconds) */
-	{ "wan_pppoe_keepalive", "0", 0 },	/* Restore link automatically */
-	{ "wan_pppoe_demand", "0", 0 },		/* Dial on demand */
-	{ "wan_pppoe_mru", "1492", 0 },		/* Negotiate MRU to this value */
-	{ "wan_pppoe_mtu", "1492", 0 },		/* Negotiate MTU to the smaller of this value or the peer MRU */
-	{ "wan_pppoe_service", "", 0 },		/* PPPoE service name */
-	{ "wan_pppoe_ac", "", 0 },		/* PPPoE access concentrator name */
-
-	/* Misc WAN parameters */
-	{ "wan_desc", "", 0 },			/* WAN connection description */
-	{ "wan_route", "", 0 },			/* Static routes (ipaddr:netmask:gateway:metric:ifname ...) */
-	{ "wan_primary", "0", 0 },		/* Primary wan connection */
-
-	{ "wan_unit", "0", 0 },			/* Last configured connection */
-	
-	/* Filters */
-	{ "filter_maclist", "", 0 },		/* xx:xx:xx:xx:xx:xx ... */
-	{ "filter_macmode", "deny", 0 },	/* "allow" only, "deny" only, or "disabled" (allow all) */
-	{ "filter_client0", "", 0 },		/* [lan_ipaddr0-lan_ipaddr1|*]:lan_port0-lan_port1,proto,enable,day_start-day_end,sec_start-sec_end,desc */
-
-	/* Port forwards */
-	{ "dmz_ipaddr", "", 0 },		/* x.x.x.x (equivalent to 0-60999>dmz_ipaddr:0-60999) */
-	{ "forward_port0", "", 0 },		/* wan_port0-wan_port1>lan_ipaddr:lan_port0-lan_port1[:,]proto[:,]enable[:,]desc */
-	{ "autofw_port0", "", 0 },		/* out_proto:out_port,in_proto:in_port0-in_port1>to_port0-to_port1,enable,desc */
-
-	/* DHCP server parameters */
-	{ "dhcp_start", "192.168.1.100", 0 },	/* First assignable DHCP address */
-	{ "dhcp_end", "192.168.1.150", 0 },	/* Last assignable DHCP address */
-	{ "dhcp_domain", "wan", 0 },		/* Use WAN domain name first if available (wan|lan) */
-	{ "dhcp_wins", "wan", 0 },		/* Use WAN WINS first if available (wan|lan) */
-
-	/* Web server parameters */
-	{ "http_username", "", 0 },		/* Username */
-	{ "http_passwd", "admin", 0 },		/* Password */
-	{ "http_wanport", "", 0 },		/* WAN port to listen on */
-	{ "http_lanport", "80", 0 },		/* LAN port to listen on */
-
-	/* Wireless parameters */
-	{ "wl_ifname", "", 0 },			/* Interface name */
-	{ "wl_hwaddr", "", 0 },			/* MAC address */
-	{ "wl_phytype", "g", 0 },		/* Current wireless band ("a" (5 GHz), "b" (2.4 GHz), or "g" (2.4 GHz)) */
-	{ "wl_corerev", "", 0 },		/* Current core revision */
-	{ "wl_phytypes", "", 0 },		/* List of supported wireless bands (e.g. "ga") */
-	{ "wl_radioids", "", 0 },		/* List of radio IDs */
-	{ "wl_ssid", "OpenWrt", 0 },		/* Service set ID (network name) */
-	{ "wl_country", "", 0 },		/* Country (default obtained from driver) */
-	{ "wl_radio", "1", 0 },			/* Enable (1) or disable (0) radio */
-	{ "wl_closed", "0", 0 },		/* Closed (hidden) network */
-        { "wl_ap_isolate", "0", 0 },            /* AP isolate mode */
-	{ "wl_mode", "ap", 0 },			/* AP mode (ap|sta|wds) */
-	{ "wl_lazywds", "0", 0 },		/* Enable "lazy" WDS mode (0|1) */
-	{ "wl_wds", "", 0 },			/* xx:xx:xx:xx:xx:xx ... */
-	{ "wl_wep", "disabled", 0 },		/* WEP data encryption (enabled|disabled) */
-	{ "wl_auth", "0", 0 },			/* Shared key authentication optional (0) or required (1) */
-	{ "wl_key", "1", 0 },			/* Current WEP key */
-	{ "wl_key1", "", 0 },			/* 5/13 char ASCII or 10/26 char hex */
-	{ "wl_key2", "", 0 },			/* 5/13 char ASCII or 10/26 char hex */
-	{ "wl_key3", "", 0 },			/* 5/13 char ASCII or 10/26 char hex */
-	{ "wl_key4", "", 0 },			/* 5/13 char ASCII or 10/26 char hex */
-	{ "wl_maclist", "", 0 },		/* xx:xx:xx:xx:xx:xx ... */
-	{ "wl_macmode", "disabled", 0 },	/* "allow" only, "deny" only, or "disabled" (allow all) */
-	{ "wl_channel", "11", 0 },		/* Channel number */
-	{ "wl_rate", "0", 0 },			/* Rate (bps, 0 for auto) */
-	{ "wl_rateset", "default", 0 },		/* "default" or "all" or "12" */
-	{ "wl_frag", "2346", 0 },		/* Fragmentation threshold */
-	{ "wl_rts", "2347", 0 },		/* RTS threshold */
-	{ "wl_dtim", "1", 0 },			/* DTIM period */
-	{ "wl_bcn", "100", 0 },			/* Beacon interval */
-	{ "wl_plcphdr", "long", 0 },		/* 802.11b PLCP preamble type */
-	{ "wl_net_mode", "mixed", 0 },		/* 54g mode */
-	{ "wl_gmode", "6", 0 },			/* 54g mode */
-	{ "wl_gmode_protection", "auto", 0 },	/* 802.11g RTS/CTS protection (off|auto) */
-	{ "wl_afterburner", "auto", 0 },	/* AfterBurner */
-	{ "wl_frameburst", "off", 0 },		/* BRCM Frambursting mode (off|on) */
-	{ "wl_antdiv", "-1", 0 },		/* Antenna Diversity (-1|0|1|3) */
-	{ "wl_infra", "1", 0 },			/* Network Type (BSS/IBSS) */
-
-	/* WPA parameters */
-	{ "security_mode", "open", 0 },
-	{ "wl_auth_mode", "open", 0 },		/* Network authentication mode (open|shared|radius|wpa|psk) */
-	{ "wl_wpa_psk", "", 0 },		/* WPA pre-shared key */
-	{ "wl_wpa_gtk_rekey", "3600", 0 },	/* GTK rotation interval */
-	{ "wl_radius_ipaddr", "", 0 },		/* RADIUS server IP address */
-	{ "wl_radius_key", "", 0 },		/* RADIUS shared secret */
-	{ "wl_radius_port", "1812", 0 },	/* RADIUS server UDP port */
-	{ "wl_crypto", "tkip", 0 },		/* WPA data encryption */
-
-
-	{ "wl_unit", "0", 0 },			/* Last configured interface */
-		
-	/* Restore defaults */
-	{ "restore_defaults", "0", 0 },		/* Set to 0 to not restore defaults on boot */
-
-	{ 0, 0, 0 }
-};
diff --git a/openwrt/target/linux/package/nvram/src/linux_timer.c b/openwrt/target/linux/package/nvram/src/linux_timer.c
deleted file mode 100644
index 0402e4437..000000000
--- a/openwrt/target/linux/package/nvram/src/linux_timer.c
+++ /dev/null
@@ -1,738 +0,0 @@
-/*
- * Copyright 2004, Broadcom Corporation
- * All Rights Reserved.
- * 
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- *
- * Low resolution timer interface linux specific implementation.
- *
- * $Id$
- */
-
-/*
-* debug facilities
-*/
-#define TIMER_DEBUG	0
-#if TIMER_DEBUG
-#define TIMERDBG(fmt, args...) printf("%s: " fmt "\n" , __FUNCTION__ , ## args)
-#else
-#define TIMERDBG(fmt, args...)
-#endif
-
-
-/*
- * POSIX timer support for Linux. Taken from linux_timer.c in upnp
- */
-
-#define __USE_GNU
-
-
-#include <stdlib.h>	    // for malloc, free, etc.
-#include <string.h>	    // for memset, strncasecmp, etc.
-#include <assert.h>	    // for assert, of course.
-#include <signal.h>	    // for sigemptyset, etc.
-#include <stdio.h>	    // for printf, etc.
-#include <sys/time.h>
-#include <time.h>
-
-/* define TIMER_PROFILE to enable code which guages how accurate the timer functions are.
-   For each expiring timer the code will print the expected time interval and the actual time interval.
-#define TIMER_PROFILE
-*/
-#undef TIMER_PROFILE
-
-/*
-timer_cancel( ) - cancel a timer
-timer_connect( ) - connect a user routine to the timer signal
-timer_create( ) - allocate a timer using the specified clock for a timing base (POSIX)
-timer_delete( ) - remove a previously created timer (POSIX)
-timer_gettime( ) - get the remaining time before expiration and the reload value (POSIX)
-timer_getoverrun( ) - return the timer expiration overrun (POSIX)
-timer_settime( ) - set the time until the next expiration and arm timer (POSIX)
-nanosleep( ) - suspend the current task until the time interval elapses (POSIX)
-*/
-
-#define MS_PER_SEC 1000
-#define US_PER_SEC 1000000
-#define US_PER_MS  1000
-#define UCLOCKS_PER_SEC 1000000
-
-typedef void (*event_callback_t)(timer_t, int);
-
-#ifndef TIMESPEC_TO_TIMEVAL
-# define TIMESPEC_TO_TIMEVAL(tv, ts) {                                   \
-        (tv)->tv_sec = (ts)->tv_sec;                                    \
-        (tv)->tv_usec = (ts)->tv_nsec / 1000;                           \
-}
-#endif
-
-#ifndef TIMEVAL_TO_TIMESPEC
-# define TIMEVAL_TO_TIMESPEC(tv, ts) {                                   \
-        (ts)->tv_sec = (tv)->tv_sec;                                    \
-        (ts)->tv_nsec = (tv)->tv_usec * 1000;                           \
-}
-#endif
-
-#define ROUNDUP(x,y) ((((x)+(y)-1)/(y))*(y))
-
-#define timerroundup(t,g) \
-    do { \
-	if (!timerisset(t)) (t)->tv_usec=1; \
-	if ((t)->tv_sec == 0) (t)->tv_usec=ROUNDUP((t)->tv_usec, g); \
-    } while (0)
-
-typedef long uclock_t;
-
-#define TFLAG_NONE	0
-#define TFLAG_CANCELLED	(1<<0)
-#define TFLAG_DELETED	(1<<1)
-
-struct event {
-    struct timeval it_interval;
-    struct timeval it_value;
-    event_callback_t func;
-    int arg;
-    unsigned short flags;
-    struct event *next;
-#ifdef TIMER_PROFILE
-    uint expected_ms;
-    uclock_t start;
-#endif
-};
-
-void timer_cancel(timer_t timerid);
-
-static void alarm_handler(int i);
-static void check_event_queue();
-static void print_event_queue();
-static void check_timer();
-#if THIS_FINDS_USE
-static int count_queue(struct event *);
-#endif
-static int timer_change_settime(timer_t timer_id, const struct itimerspec *timer_spec);
-void block_timer();
-void unblock_timer();
-
-static struct event *event_queue = NULL;
-static struct event *event_freelist;
-static uint g_granularity;
-static int g_maxevents = 0;
-
-uclock_t uclock()
-{
-    struct timeval tv;
-
-    gettimeofday(&tv, NULL);
-    return ((tv.tv_sec * US_PER_SEC) + tv.tv_usec);
-}
-
-
-void init_event_queue(int n)
-{
-    int i;
-    struct itimerval tv;
-    
-    g_maxevents = n;
-    event_freelist = (struct event *) malloc(n * sizeof(struct event));
-    memset(event_freelist, 0, n * sizeof(struct event));
-
-    for (i = 0; i < (n-1); i++) 
-	event_freelist[i].next = &event_freelist[i+1];
-
-    event_freelist[i].next = NULL;
-
-    tv.it_interval.tv_sec = 0;
-    tv.it_interval.tv_usec = 1;
-    tv.it_value.tv_sec = 0;
-    tv.it_value.tv_usec = 0;
-    setitimer (ITIMER_REAL, &tv, 0);
-    setitimer (ITIMER_REAL, 0, &tv);
-    g_granularity = tv.it_interval.tv_usec;
-
-    signal(SIGALRM, alarm_handler);
-}
-
-
-int clock_gettime(
-    clockid_t         clock_id, /* clock ID (always CLOCK_REALTIME) */
-    struct timespec * tp        /* where to store current time */
-)
-{
-    struct timeval tv;
-    int n;
-
-
-    n = gettimeofday(&tv, NULL);
-    TIMEVAL_TO_TIMESPEC(&tv, tp);
-    
-    return n;
-}
-
-
-int timer_create(
-    clockid_t         clock_id, /* clock ID (always CLOCK_REALTIME) */
-    struct sigevent * evp,      /* user event handler */
-    timer_t *         pTimer    /* ptr to return value */
-)
-{
-    struct event *event;
-
-    if (clock_id != CLOCK_REALTIME) {
-	TIMERDBG("timer_create can only support clock id CLOCK_REALTIME");
-	exit(1);
-    }
-
-    if (evp != NULL) {
-	if (evp->sigev_notify != SIGEV_SIGNAL || evp->sigev_signo != SIGALRM) {
-	    TIMERDBG("timer_create can only support signalled alarms using SIGALRM");
-	    exit(1);
-	}
-    }
-
-    event = event_freelist;
-    if (event == NULL) {
-	print_event_queue();
-    }
-    assert(event != NULL);
-
-    event->flags = TFLAG_NONE;
-    
-    event_freelist = event->next;
-    event->next = NULL;
-
-    check_event_queue();
-
-    *pTimer = (timer_t) event;
-
-    return 0;
-}
-
-int timer_delete(
-    timer_t timerid /* timer ID */
-)
-{
-    struct event *event = (struct event *) timerid;
-    
-    if (event->flags & TFLAG_DELETED) {
-	TIMERDBG("Cannot delete a deleted event");
-	return 1;
-    }
-
-    timer_cancel(timerid);
-    
-    event->flags |= TFLAG_DELETED;
-
-    event->next = event_freelist;
-    event_freelist = event;
-
-    return 0;
-}
-
-int timer_connect
-(
-    timer_t     timerid, /* timer ID */
-    void (*routine)(timer_t, int), /* user routine */
-    int         arg      /* user argument */
-)
-{
-    struct event *event = (struct event *) timerid;
-
-    assert(routine != NULL);
-    event->func = routine;
-    event->arg = arg;
-    
-    return 0;
-}    
-
-/* 
- * Please Call this function only from the call back functions of the alarm_handler.
- * This is just a hack 
-*/
-int timer_change_settime
-(
-    timer_t                   timerid, /* timer ID */
-    const struct itimerspec * value   /* time to be set */
-)
-{
-    struct event *event = (struct event *) timerid;
-
-    TIMESPEC_TO_TIMEVAL(&event->it_interval, &value->it_interval);
-    TIMESPEC_TO_TIMEVAL(&event->it_value, &value->it_value);
-
-    return 1; 	
-}
-
-int timer_settime
-(
-    timer_t                   timerid, /* timer ID */
-    int                       flags,   /* absolute or relative */
-    const struct itimerspec * value,   /* time to be set */
-    struct itimerspec *       ovalue   /* previous time set (NULL=no result) */
-)
-{
-    struct itimerval itimer;
-    struct event *event = (struct event *) timerid;
-    struct event **ppevent;
-
-    TIMESPEC_TO_TIMEVAL(&event->it_interval, &value->it_interval);
-    TIMESPEC_TO_TIMEVAL(&event->it_value, &value->it_value);
-
-    /* if .it_value is zero, the timer is disarmed */
-    if (!timerisset(&event->it_value)) {
-	timer_cancel(timerid);
-	return 0;
-    }
-
-    block_timer();
-
-#ifdef TIMER_PROFILE
-    event->expected_ms = (event->it_value.tv_sec * MS_PER_SEC) + (event->it_value.tv_usec / US_PER_MS);
-    event->start = uclock();
-#endif
-    if (event->next) {
-	TIMERDBG("calling timer_settime with a timer that is already on the queue.");
-    }
-
-
-    /* We always want to make sure that the event at the head of the
-       queue has a timeout greater than the itimer granularity.
-       Otherwise we end up with the situation that the time remaining
-       on an itimer is greater than the time at the head of the queue
-       in the first place. */
-    timerroundup(&event->it_value, g_granularity);
-
-    timerclear(&itimer.it_value);
-    getitimer(ITIMER_REAL, &itimer);
-    if (timerisset(&itimer.it_value)) {
-	// reset the top timer to have an interval equal to the remaining interval 
-	// when the timer was cancelled.
-	if (event_queue) {
-	    if (timercmp(&(itimer.it_value), &(event_queue->it_value), >)) {
-		// it is an error if the amount of time remaining is more than the amount of time 
-		// requested by the top event.
-		//
-		TIMERDBG("timer_settime: TIMER ERROR!");
-
-	    } else {
-		// some portion of the top event has already expired.
-		// Reset the interval of the top event to remaining
-		// time left in that interval.
-		//
-		event_queue->it_value = itimer.it_value;
-
-		// if we were the earliest timer before now, we are still the earliest timer now.
-		// we do not need to reorder the list.
-	    }
-	}
-    }
-
-    // Now, march down the list, decrementing the new timer by the
-    // current it_value of each event on the queue.
-    ppevent = &event_queue;
-    while (*ppevent) {
-	if ( timercmp(&(event->it_value), &((*ppevent)->it_value), <) ) {
-	    // if the proposed event will trigger sooner than the next event
-	    // in the queue, we will insert the new event just before the next one.
-	    //
-	    // we also need to adjust the delta value to the next event.
-	    timersub(&((*ppevent)->it_value), &(event->it_value), &((*ppevent)->it_value));
-	    break;
-	}
-	// subtract the interval of the next event from the proposed interval.
-	timersub(&(event->it_value), &((*ppevent)->it_value), &(event->it_value));
-
-	ppevent = &((*ppevent)->next);
-    }
-    
-    // we have found our proper place in the queue, 
-    // link our new event into the pending event queue.
-    event->next = *ppevent;
-    *ppevent = event;
-
-    check_event_queue();
-
-    // if our new event ended up at the front of the queue, reissue the timer.
-    if (event == event_queue) {
-	timerroundup(&event_queue->it_value, g_granularity);
-	timerclear(&itimer.it_interval);
-	itimer.it_value = event_queue->it_value;
-	
-	// we want to be sure to never turn off the timer completely, 
-	// so if the next interval is zero, set it to some small value.
-	if (!timerisset(&(itimer.it_value)))
-	    itimer.it_value = (struct timeval) { 0, 1 };
-	
-	assert(!timerisset(&itimer.it_interval));
-	assert(itimer.it_value.tv_sec > 0 || itimer.it_value.tv_usec >= g_granularity);
-	assert(event_queue->it_value.tv_sec > 0 || event_queue->it_value.tv_usec >= g_granularity);
-	setitimer(ITIMER_REAL, &itimer, NULL);
-	check_timer();
-    }
-
-    event->flags &= ~TFLAG_CANCELLED;
-    
-    unblock_timer();
-
-    return 0;
-}
-
-static void check_timer()
-{
-    struct itimerval itimer;
-    
-    getitimer(ITIMER_REAL, &itimer);
-    if (timerisset(&itimer.it_interval)) {
-	TIMERDBG("ERROR timer interval is set.");
-    }
-    if (timercmp(&(itimer.it_value), &(event_queue->it_value), >)) {
-	TIMERDBG("ERROR timer expires later than top event.");
-    }
-}
-
-
-static void check_event_queue()
-{
-    struct timeval sum;
-    struct event *event;
-    int i = 0;
-
-#ifdef notdef
-    int nfree = 0;
-    struct event *p;
-    for (p = event_freelist; p; p = p->next)
-	nfree++;
-    printf("%d free events\n", nfree);
-#endif
-    
-    timerclear(&sum);
-    for (event = event_queue; event; event = event->next) {
-	if (i > g_maxevents) {
-	    TIMERDBG("timer queue looks like it loops back on itself!");
-	    print_event_queue();
-	    exit(1);
-	}
-	i++;
-    }
-}
-
-#if THIS_FINDS_USE
-/* The original upnp version has this unused function, so I left it in
-   to maintain the resemblance. */
-static int count_queue(struct event *event_queue)
-{
-    struct event *event;
-    int i = 0;
-    for (event = event_queue; event; event = event->next) 
-	i++;
-    return i;
-}
-#endif
-
-static void print_event_queue()
-{
-    struct event *event;
-    int i = 0;
-
-    for (event = event_queue; event; event = event->next) {
-	printf("#%d (0x%x)->0x%x: \t%d sec %d usec\t%p\n", 
-	       i++, (unsigned int) event, (unsigned int) event->next, (int) event->it_value.tv_sec, (int) event->it_value.tv_usec, event->func);
-	if (i > g_maxevents) {
-	    printf("...(giving up)\n");
-	    break;
-	}
-    }
-}
-
-// The top element of the event queue must have expired.
-// Remove that element, run its function, and reset the timer.
-// if there is no interval, recycle the event structure.
-static void alarm_handler(int i)
-{
-    struct event *event, **ppevent;
-    struct itimerval itimer;
-    struct timeval small_interval = { 0, g_granularity/2 };
-#ifdef TIMER_PROFILE
-    uint junk;
-    uclock_t end;
-    uint actual;
-#endif
-
-    block_timer();
-
-    // Loop through the event queue and remove the first event plus any 
-    // subsequent events that will expire very soon thereafter (within 'small_interval'}.
-    //
-    do {
-	// remove the top event.
-	event = event_queue;
-	event_queue = event_queue->next;
-	event->next = NULL;
-
-#ifdef TIMER_PROFILE
-	end = uclock();
-	actual = ((end-event->start)/((uclock_t)UCLOCKS_PER_SEC/1000));
-	if (actual < 0)
-	    junk = end;
-	TIMERDBG("expected %d ms  actual %d ms", event->expected_ms, ((end-event->start)/((uclock_t)UCLOCKS_PER_SEC/1000)));
-#endif
-	
-	    // call the event callback function
-	    (*(event->func))((timer_t) event, (int)event->arg);
-
-	/* If the event has been cancelled, do NOT put it back on the queue. */
-	if ( !(event->flags & TFLAG_CANCELLED) ) {
-
-	    // if the event is a recurring event, reset the timer and
-	    // find its correct place in the sorted list of events.
-	    //
-	    if (timerisset(&event->it_interval)) {
-		// event is recurring...
-		//
-		event->it_value = event->it_interval;
-#ifdef TIMER_PROFILE
-		event->expected_ms = (event->it_value.tv_sec * MS_PER_SEC) + (event->it_value.tv_usec / US_PER_MS);
-		event->start = uclock();
-#endif
-		timerroundup(&event->it_value, g_granularity);
-
-		// Now, march down the list, decrementing the new timer by the
-		// current delta of each event on the queue.
-		ppevent = &event_queue;
-		while (*ppevent) {
-		    if ( timercmp(&(event->it_value), &((*ppevent)->it_value), <) ) {
-			// if the proposed event will trigger sooner than the next event
-			// in the queue, we will insert the new event just before the next one.
-			//
-			// we also need to adjust the delta value to the next event.
-			timersub(&((*ppevent)->it_value), &(event->it_value), &((*ppevent)->it_value));
-			break;
-		    }
-		    timersub(&(event->it_value), &((*ppevent)->it_value), &(event->it_value));
-		    ppevent = &((*ppevent)->next);
-		}
-
-		// we have found our proper place in the queue, 
-		// link our new event into the pending event queue.
-		event->next = *ppevent;
-		*ppevent = event;
-	    } else {
-		// there is no interval, so recycle the event structure.
-		//timer_delete((timer_t) event);
-	    }
-	}
-
-	check_event_queue();
-	
-    } while (event_queue && timercmp(&event_queue->it_value, &small_interval, <));
-    
-    // re-issue the timer...
-    if (event_queue) {
-	timerroundup(&event_queue->it_value, g_granularity);
-
-	timerclear(&itimer.it_interval);
-	itimer.it_value = event_queue->it_value;
-	// we want to be sure to never turn off the timer completely, 
-	// so if the next interval is zero, set it to some small value.
-	if (!timerisset(&(itimer.it_value)))
-	    itimer.it_value = (struct timeval) { 0, 1 };
-
-	setitimer(ITIMER_REAL, &itimer, NULL);
-	check_timer();
-    } else {
-	TIMERDBG("There are no events in the queue - timer not reset.");
-    }
-
-    unblock_timer();
-}
-
-static int block_count = 0;
-
-void block_timer()
-{
-    sigset_t set;
-
-    if (block_count++ == 0) {
-	sigemptyset(&set);
-	sigaddset(&set, SIGALRM);
-	sigprocmask(SIG_BLOCK, &set, NULL);
-    }
-}
-
-void unblock_timer()
-{
-    sigset_t set;
-
-    if (--block_count == 0) {
-	sigemptyset(&set);
-	sigaddset(&set, SIGALRM);
-	sigprocmask(SIG_UNBLOCK, &set, NULL);
-    }
-}
-
-void timer_cancel_all()
-{
-    struct itimerval timeroff = { { 0, 0 }, { 0, 0} };
-    struct event *event;
-    struct event **ppevent;
-
-    setitimer(ITIMER_REAL, &timeroff, NULL);
-
-    ppevent = &event_queue;
-    while (*ppevent) {
-	event = *ppevent;
-	*ppevent = event->next;
-	event->next = NULL;
-    }
-}
-
-
-
-void timer_cancel(timer_t timerid)
-{
-    struct itimerval itimer;
-    struct itimerval timeroff = { { 0, 0 }, { 0, 0} };
-    struct event *event = (struct event *) timerid;
-    struct event **ppevent;
-
-    if (event->flags & TFLAG_CANCELLED) {
-	TIMERDBG("Cannot cancel a cancelled event");
-    	return;
-    }
-
-    block_timer();
-    
-    ppevent = &event_queue;
-    while (*ppevent) {
-	if ( *ppevent == event ) {
-
-	    /* RACE CONDITION - if the alarm goes off while we are in
-	       this loop, and if the timer we want to cancel is the
-	       next to expire, the alarm will end up firing
-	       after this routine is complete, causing it to go off early. */
-
-	    /* If the cancelled timer is the next to expire, 
-	       we need to do something special to clean up correctly. */
-	    if (event == event_queue && event->next != NULL) {
-		timerclear(&itimer.it_value);
-		getitimer(ITIMER_REAL, &itimer);
-		
-		/* subtract the time that has already passed while waiting for this timer... */
-		timersub(&(event->it_value), &(itimer.it_value), &(event->it_value));
-
-		/* and add any remainder to the next timer in the list */
-		timeradd(&(event->next->it_value), &(event->it_value), &(event->next->it_value));
-	    }
-
-	    *ppevent = event->next;
-	    event->next = NULL;
-
-	    if (event_queue) {
-		timerroundup(&event_queue->it_value, g_granularity);
-		timerclear(&itimer.it_interval);
-		itimer.it_value = event_queue->it_value;
-		
-		/* We want to be sure to never turn off the timer
-		   completely if there are more events on the queue,
-		   so if the next interval is zero, set it to some
-		   small value.  */
-
-		if (!timerisset(&(itimer.it_value)))
-		    itimer.it_value = (struct timeval) { 0, 1 };
-		
-		assert(itimer.it_value.tv_sec > 0 || itimer.it_value.tv_usec >= g_granularity);
-		assert(event_queue->it_value.tv_sec > 0 || event_queue->it_value.tv_usec >= g_granularity);
-		setitimer(ITIMER_REAL, &itimer, NULL);
-		check_timer();
-	    } else {
-		setitimer(ITIMER_REAL, &timeroff, NULL);
-	    }
-	    break;
-	}
-	ppevent = &((*ppevent)->next);
-    }
-
-    event->flags |= TFLAG_CANCELLED;
-
-    unblock_timer();
-}
-
-/*
-* timer related headers
-*/
-#include "bcmtimer.h"
-
-/*
-* locally used global variables and constants
-*/
-
-/*
-* Initialize internal resources used in the timer module. It must be called
-* before any other timer function calls. The param 'timer_entries' is used
-* to pre-allocate fixed number of timer entries.
-*/
-int bcm_timer_module_init(int timer_entries, bcm_timer_module_id *module_id)
-{
-	init_event_queue(timer_entries);
-	*module_id = (bcm_timer_module_id)event_freelist;
-	return 0;
-}
-
-/*
-* Cleanup internal resources used by this timer module. It deletes all
-* pending timer entries from the backend timer system as well.
-*/
-int bcm_timer_module_cleanup(bcm_timer_module_id module_id)
-{
-	module_id = 0;
-	return 0;
-}
-
-/* Enable/Disable timer module */
-int bcm_timer_module_enable(bcm_timer_module_id module_id, int enable)
-{
-	if (enable)
-		unblock_timer();
-	else
-		block_timer();
-	return 0;
-}
-
-int bcm_timer_create(bcm_timer_module_id module_id, bcm_timer_id *timer_id)
-{
-	module_id = 0;
-	return timer_create(CLOCK_REALTIME, NULL, (timer_t *)timer_id);
-}
-
-int bcm_timer_delete(bcm_timer_id timer_id)
-{
-	return timer_delete((timer_t)timer_id);
-}
-
-int bcm_timer_gettime(bcm_timer_id timer_id, struct itimerspec *timer_spec)
-{
-	return -1;
-}
-
-int bcm_timer_settime(bcm_timer_id timer_id, const struct itimerspec *timer_spec)
-{
-	return timer_settime((timer_t)timer_id, 0, timer_spec, NULL);
-}
-
-int bcm_timer_connect(bcm_timer_id timer_id, bcm_timer_cb func, int data)
-{
-	return timer_connect((timer_t)timer_id, (void *)func, data);
-}
-
-int bcm_timer_cancel(bcm_timer_id timer_id)
-{
-	timer_cancel((timer_t)timer_id);
-	return 0;
-}
-int bcm_timer_change_expirytime(bcm_timer_id timer_id, const struct itimerspec *timer_spec)
-{
-	timer_change_settime((timer_t)timer_id, timer_spec);
-	return 1;
-}
diff --git a/openwrt/target/linux/package/nvram/src/main.c b/openwrt/target/linux/package/nvram/src/main.c
deleted file mode 100644
index a64430f7b..000000000
--- a/openwrt/target/linux/package/nvram/src/main.c
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * Frontend command-line utility for Linux NVRAM layer
- *
- * Copyright 2004, Broadcom Corporation
- * All Rights Reserved.
- * 
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- *
- * $Id$
- */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-
-#include <typedefs.h>
-#include <bcmnvram.h>
-
-static void
-usage(void)
-{
-	fprintf(stderr, "usage: nvram [get name] [set name=value] [unset name] [show]\n");
-	exit(0);
-}
-
-/* NVRAM utility */
-int
-main(int argc, char **argv)
-{
-	char *name, *value, buf[NVRAM_SPACE];
-	int size;
-
-	/* Skip program name */
-	--argc;
-	++argv;
-
-	if (!*argv) 
-		usage();
-
-	/* Process the remaining arguments. */
-	for (; *argv; argv++) {
-		if (!strncmp(*argv, "get", 3)) {
-			if (*++argv) {
-				if ((value = nvram_get(*argv)))
-					puts(value);
-			}
-		}
-		else if (!strncmp(*argv, "set", 3)) {
-			if (*++argv) {
-				strncpy(value = buf, *argv, sizeof(buf));
-				name = strsep(&value, "=");
-				nvram_set(name, value);
-			}
-		}
-		else if (!strncmp(*argv, "unset", 5)) {
-			if (*++argv)
-				nvram_unset(*argv);
-		}
-		else if (!strncmp(*argv, "commit", 5)) {
-			nvram_commit();
-		}
-		else if (!strncmp(*argv, "show", 4) ||
-			   !strncmp(*argv, "getall", 6)) {
-			nvram_getall(buf, sizeof(buf));
-			for (name = buf; *name; name += strlen(name) + 1)
-				puts(name);
-			size = sizeof(struct nvram_header) + (int) name - (int) buf;
-			fprintf(stderr, "size: %d bytes (%d left)\n", size, NVRAM_SPACE - size);
-		}
-		if (!*argv)
-			break;
-	}
-
-	return 0;
-}	
diff --git a/openwrt/target/linux/package/nvram/src/nvram_convert.c b/openwrt/target/linux/package/nvram/src/nvram_convert.c
deleted file mode 100644
index 485909026..000000000
--- a/openwrt/target/linux/package/nvram/src/nvram_convert.c
+++ /dev/null
@@ -1,77 +0,0 @@
-
-#define WL(a)	"wl_"a	
-#define WL0(a)	"wl0_"a	
-#define D11G(a)	"d11g_"a
-
-#define PPP(a)		"ppp_"a
-#define PPPOE(a)	"pppoe_"a
-
-struct nvram_convert {
-        char *name;		// for WEB
-	char *wl0_name;		// for driver
-        char *d11g_name;	// for old nv name
-};
-
-struct nvram_convert nvram_converts[] = {
-	// Bellow change from 3.11.48.7
-	{ WL("ssid"),	 	WL0("ssid"),	""},
-	{ WL("radio"), 		WL0("mode"),	""},
-	{ WL("mode"), 		WL0("mode"),	""},
-	{ WL("wds"), 		WL0("wds"),	""},
-	{ WL("auth"), 		WL0("auth"),	""},
-	{ WL("key"), 		WL0("key"), 	""},
-	{ WL("key1"), 		WL0("key1"), 	""},
-	{ WL("key2"), 		WL0("key2"),	""},
-	{ WL("key3"), 		WL0("key3"),	""},
-	{ WL("key4"), 		WL0("key4"),	""},
-	{ WL("maclist"), 	WL0("maclist"),	""},
-	{ WL("channel"), 	WL0("channel"), D11G("channel")},
-	{ WL("rateset"), 	WL0("rateset"), D11G("rateset")},
-	{ WL("rts"), 		WL0("rts"), 	D11G("rts")},
-	{ WL("bcn"), 		WL0("bcn"),	D11G("bcn")},
-	{ WL("gmode"), 		WL0("gmode"), 	"d11g_mode"},
-	{ WL("unit"), 		WL0("unit"), 	""},
-	{ WL("ifname"), 	WL0("ifname"),	""},
-	{ WL("phytype"), 	WL0("phytype"),	""},
-	{ WL("country"), 	WL0("country"),	""},
-	{ WL("closed"), 	WL0("closed"),	""},
-	{ WL("lazywds"), 	WL0("lazywds"),	""},
-	{ WL("wep"), 		WL0("wep"),	""},
-	{ WL("macmode"), 	WL0("macmode"),	""},
-	{ WL("rate"), 		WL0("rate"), 	D11G("rate")},
-	{ WL("frag"), 		WL0("frag"),	D11G("frag")},
-	{ WL("dtim"), 		WL0("dtim"), 	D11G("dtim")},
-	{ WL("plcphdr"), 	WL0("plcphdr"),	""},
-	{ WL("gmode_protection"), 	WL0("gmode_protection"),	""},
-	{ WL("radio"), 		WL0("radio"),	""},
-	// Bellow change from 3.21.9.0
-	{ WL("auth_mode"), 	WL0("auth_mode"),	""},
-	{ WL("radius_ipaddr"), 	WL0("radius_ipaddr"),	""},
-	{ WL("radius_port"), 	WL0("radius_port"),	""},
-	{ WL("radius_key"), 	WL0("radius_key"),	""},
-	{ WL("wpa_psk"), 	WL0("wpa_psk"),		""},
-	{ WL("wpa_gtk_rekey"), 	WL0("wpa_gtk_rekey"),	""},
-	{ WL("frameburst"), 	WL0("frameburst"),	""},
-	{ WL("crypto"), 	WL0("crypto"),		""},
-	{ WL("ap_isolate"), 	WL0("ap_isolate"),	""},
-	{ WL("afterburner"), 	WL0("afterburner"),	""},
-	// for PPPoE
-	{ PPP("username"), 	PPPOE("username"),	""},
-	{ PPP("passwd"), 	PPPOE("passwd"),	""},
-	{ PPP("idletime"), 	PPPOE("idletime"),	""},
-	{ PPP("keepalive"), 	PPPOE("keepalive"),	""},
-	{ PPP("demand"), 	PPPOE("demand"),	""},
-	{ PPP("service"), 	PPPOE("service"),	""},
-	{ PPP("ac"), 		PPPOE("ac"),		""},
-	{ PPP("static"),	PPPOE("static"),	""},
-	{ PPP("static_ip"), 	PPPOE("static_ip"),	""},
-	{ PPP("username_1"), 	PPPOE("username_1"),	""},
-	{ PPP("passwd_1"), 	PPPOE("passwd_1"),	""},
-	{ PPP("idletime_1"), 	PPPOE("idletime_1"),	""},
-	{ PPP("keepalive_1"), 	PPPOE("keepalive_1"),	""},
-	{ PPP("demand_1"), 	PPPOE("demand_1"),	""},
-	{ PPP("service_1"), 	PPPOE("service_1"),	""},
-	{ PPP("ac_1"), 		PPPOE("ac_1"),		""},
-	
-	{ 0, 0, 0},
-};
diff --git a/openwrt/target/linux/package/nvram/src/nvram_convert.h b/openwrt/target/linux/package/nvram/src/nvram_convert.h
deleted file mode 100644
index 70e12327d..000000000
--- a/openwrt/target/linux/package/nvram/src/nvram_convert.h
+++ /dev/null
@@ -1,7 +0,0 @@
-
-struct nvram_convert {
-        char *name;
-	char *wl0_name;
-        char *d11g_name;
-};
-
diff --git a/openwrt/target/linux/package/nvram/src/nvram_linux.c b/openwrt/target/linux/package/nvram/src/nvram_linux.c
deleted file mode 100644
index c41e32118..000000000
--- a/openwrt/target/linux/package/nvram/src/nvram_linux.c
+++ /dev/null
@@ -1,320 +0,0 @@
-/*
- * NVRAM variable manipulation (Linux user mode half)
- *
- * Copyright 2004, Broadcom Corporation
- * All Rights Reserved.
- * 
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- *
- * $Id$
- */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <unistd.h>
-#include <errno.h>
-#include <error.h>
-#include <string.h>
-#include <sys/ioctl.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <fcntl.h>
-#include <sys/mman.h>
-
-#include <typedefs.h>
-#include <bcmnvram.h>
-#include <nvram_convert.h>
-#include <shutils.h>
-#include <utils.h>
-
-#define PATH_DEV_NVRAM "/dev/nvram"
-
-/* Globals */
-static int nvram_fd = -1;
-static char *nvram_buf = NULL;
-int check_action(void);
-int file_to_buf(char *path, char *buf, int len);
-
-int
-nvram_init(void *unused)
-{
-	if ((nvram_fd = open(PATH_DEV_NVRAM, O_RDWR)) < 0)
-		goto err;
-
-	/* Map kernel string buffer into user space */
-	if ((nvram_buf = mmap(NULL, NVRAM_SPACE, PROT_READ, MAP_SHARED, nvram_fd, 0)) == MAP_FAILED) {
-		close(nvram_fd);
-		nvram_fd = -1;
-		goto err;
-	}
-
-	return 0;
-
- err:
-	perror(PATH_DEV_NVRAM);
-	return errno;
-}
-
-char *
-nvram_get(const char *name)
-{
-	size_t count = strlen(name) + 1;
-	char tmp[100], *value;
-	unsigned long *off = (unsigned long *) tmp;
-
-	if (nvram_fd < 0)
-		if (nvram_init(NULL))
-			return NULL;
-
-	if (count > sizeof(tmp)) {
-		if (!(off = malloc(count)))
-			return NULL;
-	}
-
-	/* Get offset into mmap() space */
-	strcpy((char *) off, name);
-
-	count = read(nvram_fd, off, count);
-
-	if (count == sizeof(unsigned long))
-		value = &nvram_buf[*off];
-	else
-		value = NULL;
-
-	if (count < 0)
-		perror(PATH_DEV_NVRAM);
-
-	if (off != (unsigned long *) tmp)
-		free(off);
-
-	return value;
-}
-
-int
-nvram_getall(char *buf, int count)
-{
-	int ret;
-
-	if (nvram_fd < 0)
-		if ((ret = nvram_init(NULL)))
-			return ret;
-
-	if (count == 0)
-		return 0;
-
-	/* Get all variables */
-	*buf = '\0';
-
-	ret = read(nvram_fd, buf, count);
-
-	if (ret < 0)
-		perror(PATH_DEV_NVRAM);
-
-	return (ret == count) ? 0 : ret;
-}
-
-static int
-_nvram_set(const char *name, const char *value)
-{
-	size_t count = strlen(name) + 1;
-	char tmp[100], *buf = tmp;
-	int ret;
-
-	if (nvram_fd < 0)
-		if ((ret = nvram_init(NULL)))
-			return ret;
-
-	/* Unset if value is NULL */
-	if (value)
-		count += strlen(value) + 1;
-
-	if (count > sizeof(tmp)) {
-		if (!(buf = malloc(count)))
-			return -ENOMEM;
-	}
-
-	if (value)
-		sprintf(buf, "%s=%s", name, value);
-	else
-		strcpy(buf, name);
-
-	ret = write(nvram_fd, buf, count);
-
-	if (ret < 0)
-		perror(PATH_DEV_NVRAM);
-
-	if (buf != tmp)
-		free(buf);
-
-	return (ret == count) ? 0 : ret;
-}
-
-int
-nvram_set(const char *name, const char *value)
-{
-	 extern struct nvram_convert nvram_converts[];
-         struct nvram_convert *v;
-         int ret;
-
-         ret = _nvram_set(name, value);
-
-         for(v = nvram_converts ; v->name ; v++) {
-                 if(!strcmp(v->name, name)){
-                         if(strcmp(v->wl0_name,""))      _nvram_set(v->wl0_name, value);
-                         if(strcmp(v->d11g_name,""))     _nvram_set(v->d11g_name, value);
-                 }
-         }
-
-         return ret;
-}
-
-int
-nvram_unset(const char *name)
-{
-	return _nvram_set(name, NULL);
-}
-
-int
-nvram_commit(void)
-{
-	int ret;
-	
-	cprintf("nvram_commit(): start\n");	
-	
-	if((check_action() == ACT_IDLE) || 
-	   (check_action() == ACT_SW_RESTORE) || 
-	   (check_action() == ACT_HW_RESTORE)){
-		if (nvram_fd < 0)
-			if ((ret = nvram_init(NULL)))
-				return ret;
-
-		ret = ioctl(nvram_fd, NVRAM_MAGIC, NULL);
-
-		if (ret < 0)
-			perror(PATH_DEV_NVRAM);
-	
-		cprintf("nvram_commit(): end\n");	
-	}
-	else
-		cprintf("nvram_commit():  nothing to do...\n");
-
-	return ret;
-}
-
-int file2nvram(char *filename, char *varname) {
-   FILE *fp;
-   int c,count;
-   int i=0,j=0;
-   char mem[10000],buf[30000];
-
-   if ( !(fp=fopen(filename,"rb") ))
-        return 0;
-
-   count=fread(mem,1,sizeof(mem),fp);
-   fclose(fp);
-   for (j=0;j<count;j++) {
-        if  (i > sizeof(buf)-3 )
-                break;
-        c=mem[j];
-        if (c >= 32 && c <= 126 && c != '\\' && c != '~')  {
-                buf[i++]=(unsigned char) c;
-        } else if (c==0) {
-		buf[i++]='~';
-        } else {
-                buf[i++]='\\';
-                sprintf(buf+i,"%02X",c);
-                i+=2;
-        }
-   }
-   if (i==0) return 0;
-   buf[i]=0;
-   //fprintf(stderr,"================ > file2nvram %s = [%s] \n",varname,buf); 
-   nvram_set(varname,buf);
-   //nvram_commit(); //Barry adds for test
-}
-
-int nvram2file(char *varname, char *filename) {
-   FILE *fp;
-   int c,tmp;
-   int i=0,j=0;
-   char *buf;
-   char mem[10000];
-   
-   if ( !(fp=fopen(filename,"wb") ))
-        return 0;
-        
-   buf=strdup(nvram_safe_get(varname));
-   //fprintf(stderr,"=================> nvram2file %s = [%s] \n",varname,buf);
-   while (  buf[i] && j < sizeof(mem)-3 ) {
-        if (buf[i] == '\\')  {
-                i++;
-                tmp=buf[i+2];
-                buf[i+2]=0;
-                sscanf(buf+i,"%02X",&c);
-                buf[i+2]=tmp;
-                i+=2;
-                mem[j]=c;j++;
-        } else if (buf[i] == '~') {
-		mem[j]=0;j++;
-		i++;
-        } else {
-                mem[j]=buf[i];j++;
-                i++;
-        }       
-   }
-   if (j<=0) return j;
-   j=fwrite(mem,1,j,fp);
-   fclose(fp);
-   free(buf);
-   return j;
-}  
-
-int
-check_action(void)
-{
-	char buf[80] = "";
-	
-	if(file_to_buf(ACTION_FILE, buf, sizeof(buf))){
-		if(!strcmp(buf, "ACT_TFTP_UPGRADE")){
-			cprintf("Upgrading from tftp now, quiet exit....\n");
-			return ACT_TFTP_UPGRADE;
-		}
-		else if(!strcmp(buf, "ACT_WEBS_UPGRADE")){
-			cprintf("Upgrading from web (https) now, quiet exit....\n");
-			return ACT_WEBS_UPGRADE;
-		}
-		else if(!strcmp(buf, "ACT_WEB_UPGRADE")){
-			cprintf("Upgrading from web (http) now, quiet exit....\n");
-			return ACT_WEB_UPGRADE;
-		}
-		else if(!strcmp(buf, "ACT_SW_RESTORE")){
-			cprintf("Receive restore command from web, quiet exit....\n");
-			return ACT_SW_RESTORE;
-		}
-		else if(!strcmp(buf, "ACT_HW_RESTORE")){
-			cprintf("Receive restore commond from resetbutton, quiet exit....\n");
-			return ACT_HW_RESTORE;
-		}
-	}
-	//fprintf(stderr, "Waiting for upgrading....\n");
-	return ACT_IDLE;
-}
-
-int
-file_to_buf(char *path, char *buf, int len)
-{
-	FILE *fp;
-
-	memset(buf, 0 , len);
-
-	if ((fp = fopen(path, "r"))) {
-		fgets(buf, len, fp);
-		fclose(fp);
-		return 1;
-	}
-
-	return 0;
-}
diff --git a/openwrt/target/linux/package/nvram/src/shutils.c b/openwrt/target/linux/package/nvram/src/shutils.c
deleted file mode 100644
index 49ad41af8..000000000
--- a/openwrt/target/linux/package/nvram/src/shutils.c
+++ /dev/null
@@ -1,329 +0,0 @@
-/*
- * Shell-like utility functions
- *
- * Copyright 2004, Broadcom Corporation
- * All Rights Reserved.
- * 
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- *
- * $Id$
- */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <stdarg.h>
-#include <errno.h>
-#include <error.h>
-#include <fcntl.h>
-#include <limits.h>
-#include <unistd.h>
-#include <signal.h>
-#include <string.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <sys/wait.h>
-#include <termios.h>
-#include <sys/ioctl.h>
-#include <sys/time.h>
-#include <net/ethernet.h>
-
-#include <shutils.h>
-
-/*
- * Reads file and returns contents
- * @param	fd	file descriptor
- * @return	contents of file or NULL if an error occurred
- */
-char *
-fd2str(int fd)
-{
-	char *buf = NULL;
-	size_t count = 0, n;
-
-	do {
-		buf = realloc(buf, count + 512);
-		n = read(fd, buf + count, 512);
-		if (n < 0) {
-			free(buf);
-			buf = NULL;
-		}
-		count += n;
-	} while (n == 512);
-
-	close(fd);
-	if (buf)
-		buf[count] = '\0';
-	return buf;
-}
-
-/*
- * Reads file and returns contents
- * @param	path	path to file
- * @return	contents of file or NULL if an error occurred
- */
-char *
-file2str(const char *path)
-{
-	int fd;
-
-	if ((fd = open(path, O_RDONLY)) == -1) {
-		perror(path);
-		return NULL;
-	}
-
-	return fd2str(fd);
-}
-
-/* 
- * Waits for a file descriptor to change status or unblocked signal
- * @param	fd	file descriptor
- * @param	timeout	seconds to wait before timing out or 0 for no timeout
- * @return	1 if descriptor changed status or 0 if timed out or -1 on error
- */
-int
-waitfor(int fd, int timeout)
-{
-	fd_set rfds;
-	struct timeval tv = { timeout, 0 };
-
-	FD_ZERO(&rfds);
-	FD_SET(fd, &rfds);
-	return select(fd + 1, &rfds, NULL, NULL, (timeout > 0) ? &tv : NULL);
-}
-
-/* 
- * Concatenates NULL-terminated list of arguments into a single
- * commmand and executes it
- * @param	argv	argument list
- * @param	path	NULL, ">output", or ">>output"
- * @param	timeout	seconds to wait before timing out or 0 for no timeout
- * @param	ppid	NULL to wait for child termination or pointer to pid
- * @return	return value of executed command or errno
- */
-int
-_eval(char *const argv[], char *path, int timeout, int *ppid)
-{
-	pid_t pid;
-	int status;
-	int fd;
-	int flags;
-	int sig;
-	char buf[254]="";
-	int i;
-
-	switch (pid = fork()) {
-	case -1:	/* error */
-		perror("fork");
-		return errno;
-	case 0:		/* child */
-		/* Reset signal handlers set for parent process */
-		for (sig = 0; sig < (_NSIG-1); sig++)
-			signal(sig, SIG_DFL);
-
-		/* Clean up */
-		ioctl(0, TIOCNOTTY, 0);
-		close(STDIN_FILENO);
-		close(STDOUT_FILENO);
-		close(STDERR_FILENO);
-		setsid();
-
-		/* We want to check the board if exist UART? , add by honor 2003-12-04 */
-		if ((fd = open("/dev/console", O_RDWR)) < 0) {
-                        (void) open("/dev/null", O_RDONLY);
-                        (void) open("/dev/null", O_WRONLY);
-                        (void) open("/dev/null", O_WRONLY);
-		}
-		else{
-			close(fd);
-                        (void) open("/dev/console", O_RDONLY);
-                        (void) open("/dev/console", O_WRONLY);
-                        (void) open("/dev/console", O_WRONLY);
-		}
-
-		/* Redirect stdout to <path> */
-		if (path) {
-			flags = O_WRONLY | O_CREAT;
-			if (!strncmp(path, ">>", 2)) {
-				/* append to <path> */
-				flags |= O_APPEND;
-				path += 2;
-			} else if (!strncmp(path, ">", 1)) {
-				/* overwrite <path> */
-				flags |= O_TRUNC;
-				path += 1;
-			}
-			if ((fd = open(path, flags, 0644)) < 0)
-				perror(path);
-			else {
-				dup2(fd, STDOUT_FILENO);
-				close(fd);
-			}
-		}
-
-		/* execute command */
-		for(i=0 ; argv[i] ; i++)
-			snprintf(buf+strlen(buf), sizeof(buf), "%s ", argv[i]);
-		dprintf("cmd=[%s]\n", buf);
-		setenv("PATH", "/sbin:/bin:/usr/sbin:/usr/bin", 1);
-		alarm(timeout);
-		execvp(argv[0], argv);
-		perror(argv[0]);
-		exit(errno);
-	default:	/* parent */
-		if (ppid) {
-			*ppid = pid;
-			return 0;
-		} else {
-			waitpid(pid, &status, 0);
-			if (WIFEXITED(status))
-				return WEXITSTATUS(status);
-			else
-				return status;
-		}
-	}
-}
-
-/* 
- * Concatenates NULL-terminated list of arguments into a single
- * commmand and executes it
- * @param	argv	argument list
- * @return	stdout of executed command or NULL if an error occurred
- */
-char *
-_backtick(char *const argv[])
-{
-	int filedes[2];
-	pid_t pid;
-	int status;
-	char *buf = NULL;
-
-	/* create pipe */
-	if (pipe(filedes) == -1) {
-		perror(argv[0]);
-		return NULL;
-	}
-
-	switch (pid = fork()) {
-	case -1:	/* error */
-		return NULL;
-	case 0:		/* child */
-		close(filedes[0]);	/* close read end of pipe */
-		dup2(filedes[1], 1);	/* redirect stdout to write end of pipe */
-		close(filedes[1]);	/* close write end of pipe */
-		execvp(argv[0], argv);
-		exit(errno);
-		break;
-	default:	/* parent */
-		close(filedes[1]);	/* close write end of pipe */
-		buf = fd2str(filedes[0]);
-		waitpid(pid, &status, 0);
-		break;
-	}
-	
-	return buf;
-}
-
-/* 
- * Kills process whose PID is stored in plaintext in pidfile
- * @param	pidfile	PID file
- * @return	0 on success and errno on failure
- */
-int
-kill_pidfile(char *pidfile)
-{
-	FILE *fp = fopen(pidfile, "r");
-	char buf[256];
-
-	if (fp && fgets(buf, sizeof(buf), fp)) {
-		pid_t pid = strtoul(buf, NULL, 0);
-		fclose(fp);
-		return kill(pid, SIGTERM);
-  	} else
-		return errno;
-}
-
-/*
- * fread() with automatic retry on syscall interrupt
- * @param	ptr	location to store to
- * @param	size	size of each element of data
- * @param	nmemb	number of elements
- * @param	stream	file stream
- * @return	number of items successfully read
- */
-int
-safe_fread(void *ptr, size_t size, size_t nmemb, FILE *stream)
-{
-	size_t ret = 0;
-
-	do {
-		clearerr(stream);
-		ret += fread((char *)ptr + (ret * size), size, nmemb - ret, stream);
-	} while (ret < nmemb && ferror(stream) && errno == EINTR);
-
-	return ret;
-}
-
-/*
- * fwrite() with automatic retry on syscall interrupt
- * @param	ptr	location to read from
- * @param	size	size of each element of data
- * @param	nmemb	number of elements
- * @param	stream	file stream
- * @return	number of items successfully written
- */
-int
-safe_fwrite(const void *ptr, size_t size, size_t nmemb, FILE *stream)
-{
-	size_t ret = 0;
-
-	do {
-		clearerr(stream);
-		ret += fwrite((char *)ptr + (ret * size), size, nmemb - ret, stream);
-	} while (ret < nmemb && ferror(stream) && errno == EINTR);
-
-	return ret;
-}
-
-/*
- * Convert Ethernet address string representation to binary data
- * @param	a	string in xx:xx:xx:xx:xx:xx notation
- * @param	e	binary data
- * @return	TRUE if conversion was successful and FALSE otherwise
- */
-int
-ether_atoe(const char *a, unsigned char *e)
-{
-	char *c = (char *) a;
-	int i = 0;
-
-	memset(e, 0, ETHER_ADDR_LEN);
-	for (;;) {
-		e[i++] = (unsigned char) strtoul(c, &c, 16);
-		if (!*c++ || i == ETHER_ADDR_LEN)
-			break;
-	}
-	return (i == ETHER_ADDR_LEN);
-}
-
-/*
- * Convert Ethernet address binary data to string representation
- * @param	e	binary data
- * @param	a	string in xx:xx:xx:xx:xx:xx notation
- * @return	a
- */
-char *
-ether_etoa(const unsigned char *e, char *a)
-{
-	char *c = a;
-	int i;
-
-	for (i = 0; i < ETHER_ADDR_LEN; i++) {
-		if (i)
-			*c++ = ':';
-		c += sprintf(c, "%02X", e[i] & 0xff);
-	}
-	return a;
-}
diff --git a/openwrt/target/linux/package/nvram/src/wl.c b/openwrt/target/linux/package/nvram/src/wl.c
deleted file mode 100644
index f09317ad0..000000000
--- a/openwrt/target/linux/package/nvram/src/wl.c
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
- * Wireless network adapter utilities
- *
- * Copyright 2004, Broadcom Corporation
- * All Rights Reserved.
- * 
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- *
- * $Id$
- */
-#include <string.h>
-
-#include <typedefs.h>
-#include <wlutils.h>
-
-int
-wl_probe(char *name)
-{
-	int ret, val;
-
-	/* Check interface */
-	if ((ret = wl_ioctl(name, WLC_GET_MAGIC, &val, sizeof(val))))
-		return ret;
-	if (val != WLC_IOCTL_MAGIC)
-		return -1;
-	if ((ret = wl_ioctl(name, WLC_GET_VERSION, &val, sizeof(val))))
-		return ret;
-	if (val > WLC_IOCTL_VERSION)
-		return -1;
-
-	return ret;
-}
-
-int
-wl_set_val(char *name, char *var, void *val, int len)
-{
-	char buf[128];
-	int buf_len;
-
-	/* check for overflow */
-	if ((buf_len = strlen(var)) + 1 + len > sizeof(buf))
-		return -1;
-	
-	strcpy(buf, var);
-	buf_len += 1;
-
-	/* append int value onto the end of the name string */
-	memcpy(&buf[buf_len], val, len);
-	buf_len += len;
-
-	return wl_ioctl(name, WLC_SET_VAR, buf, buf_len);
-}
-
-int
-wl_get_val(char *name, char *var, void *val, int len)
-{
-	char buf[128];
-	int ret;
-
-	/* check for overflow */
-	if (strlen(var) + 1 > sizeof(buf) || len > sizeof(buf))
-		return -1;
-	
-	strcpy(buf, var);
-	if ((ret = wl_ioctl(name, WLC_GET_VAR, buf, sizeof(buf))))
-		return ret;
-
-	memcpy(val, buf, len);
-	return 0;
-}
-
-int
-wl_set_int(char *name, char *var, int val)
-{
-	return wl_set_val(name, var, &val, sizeof(val));
-}
-
-int
-wl_get_int(char *name, char *var, int *val)
-{
-	return wl_get_val(name, var, val, sizeof(*val));
-}
-
diff --git a/openwrt/target/linux/package/nvram/src/wl_linux.c b/openwrt/target/linux/package/nvram/src/wl_linux.c
deleted file mode 100644
index 126a40b4b..000000000
--- a/openwrt/target/linux/package/nvram/src/wl_linux.c
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
- * Wireless network adapter utilities (linux-specific)
- *
- * Copyright 2004, Broadcom Corporation
- * All Rights Reserved.
- * 
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- *
- * $Id$
- */
-
-#include <stdio.h>
-#include <unistd.h>
-#include <string.h>
-#include <errno.h>
-#include <sys/ioctl.h>
-#include <net/if.h>
-
-#include <typedefs.h>
-#include <wlioctl.h>
-#include <wlutils.h>
-
-int
-wl_ioctl(char *name, int cmd, void *buf, int len)
-{
-	struct ifreq ifr;
-	wl_ioctl_t ioc;
-	int ret = 0;
- 	int s;
-
-	/* open socket to kernel */
-	if ((s = socket(AF_INET, SOCK_DGRAM, 0)) < 0) {
-		perror("socket");
-		return errno;
-	}
-
-	/* do it */
-	ioc.cmd = cmd;
-	ioc.buf = buf;
-	ioc.len = len;
-	strncpy(ifr.ifr_name, name, IFNAMSIZ);
-	ifr.ifr_data = (caddr_t) &ioc;
-	if ((ret = ioctl(s, SIOCDEVPRIVATE, &ifr)) < 0)
-		if (cmd != WLC_GET_MAGIC)
-			perror(ifr.ifr_name);
-
-	/* cleanup */
-	close(s);
-	return ret;
-}
-
-int
-wl_hwaddr(char *name, unsigned char *hwaddr)
-{
-	struct ifreq ifr;
-	int ret = 0;
- 	int s;
-
-	/* open socket to kernel */
-	if ((s = socket(AF_INET, SOCK_DGRAM, 0)) < 0) {
-		perror("socket");
-		return errno;
-	}
-
-	/* do it */
-	strncpy(ifr.ifr_name, name, IFNAMSIZ);
-	if ((ret = ioctl(s, SIOCGIFHWADDR, &ifr)) == 0)
-		memcpy(hwaddr, ifr.ifr_hwaddr.sa_data, ETHER_ADDR_LEN);
-
-	/* cleanup */
-	close(s);
-	return ret;
-}	
-