move package/linux into target/linux, use wbx' new kernel code. support building images with more than one kernel, split kernel module parts off of packages that use their own kernel modules (fuse, shfs, openswan). some cleanup in the image building process in target/. image builder is disabled for now, needs some fixing.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@1085 3c298f89-4303-0410-b956-a3cf2f4a3e73

3 files changed, 0 insertions, 1296 deletions

diff --git a/openwrt/package/linux/kernel-source/drivers/pcmcia/bcm4710_generic.c b/openwrt/package/linux/kernel-source/drivers/pcmcia/bcm4710_generic.c
deleted file mode 100644
index 18eba4679..000000000
--- a/openwrt/package/linux/kernel-source/drivers/pcmcia/bcm4710_generic.c
+++ /dev/null
@@ -1,912 +0,0 @@
-/*
- *
- * bcm47xx pcmcia driver
- *
- * Copyright 2004, Broadcom Corporation
- * All Rights Reserved.
- * 
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- *
- * Based on sa1100_generic.c from www.handhelds.org,
- *	and au1000_generic.c from oss.sgi.com.
- *
- * $Id$
- */
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/config.h>
-#include <linux/delay.h>
-#include <linux/ioport.h>
-#include <linux/kernel.h>
-#include <linux/tqueue.h>
-#include <linux/timer.h>
-#include <linux/mm.h>
-#include <linux/proc_fs.h>
-#include <linux/version.h>
-#include <linux/types.h>
-#include <linux/vmalloc.h>
-
-#include <pcmcia/version.h>
-#include <pcmcia/cs_types.h>
-#include <pcmcia/cs.h>
-#include <pcmcia/ss.h>
-#include <pcmcia/bulkmem.h>
-#include <pcmcia/cistpl.h>
-#include <pcmcia/bus_ops.h>
-#include "cs_internal.h"
-
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/system.h>
-
-#include <typedefs.h>
-#include <bcm4710.h>
-#include <sbextif.h>
-
-#include "bcm4710pcmcia.h"
-
-#ifdef PCMCIA_DEBUG
-static int pc_debug = PCMCIA_DEBUG;
-#endif
-
-MODULE_DESCRIPTION("Linux PCMCIA Card Services: bcm47xx Socket Controller");
-
-/* This structure maintains housekeeping state for each socket, such
- * as the last known values of the card detect pins, or the Card Services
- * callback value associated with the socket:
- */
-static struct bcm47xx_pcmcia_socket *pcmcia_socket;
-static int socket_count;
-
-
-/* Returned by the low-level PCMCIA interface: */
-static struct pcmcia_low_level *pcmcia_low_level;
-
-/* Event poll timer structure */
-static struct timer_list poll_timer;
-
-
-/* Prototypes for routines which are used internally: */
-
-static int  bcm47xx_pcmcia_driver_init(void);
-static void bcm47xx_pcmcia_driver_shutdown(void);
-static void bcm47xx_pcmcia_task_handler(void *data);
-static void bcm47xx_pcmcia_poll_event(unsigned long data);
-static void bcm47xx_pcmcia_interrupt(int irq, void *dev, struct pt_regs *regs);
-static struct tq_struct bcm47xx_pcmcia_task;
-
-#ifdef CONFIG_PROC_FS
-static int bcm47xx_pcmcia_proc_status(char *buf, char **start, 
-		off_t pos, int count, int *eof, void *data);
-#endif
-
-
-/* Prototypes for operations which are exported to the
- * in-kernel PCMCIA core:
- */
-
-static int bcm47xx_pcmcia_init(unsigned int sock);
-static int bcm47xx_pcmcia_suspend(unsigned int sock);
-static int bcm47xx_pcmcia_register_callback(unsigned int sock, 
-		void (*handler)(void *, unsigned int), void *info);
-static int bcm47xx_pcmcia_inquire_socket(unsigned int sock, socket_cap_t *cap);
-static int bcm47xx_pcmcia_get_status(unsigned int sock, u_int *value);
-static int bcm47xx_pcmcia_get_socket(unsigned int sock, socket_state_t *state);
-static int bcm47xx_pcmcia_set_socket(unsigned int sock, socket_state_t *state);
-static int bcm47xx_pcmcia_get_io_map(unsigned int sock, struct pccard_io_map *io);
-static int bcm47xx_pcmcia_set_io_map(unsigned int sock, struct pccard_io_map *io);
-static int bcm47xx_pcmcia_get_mem_map(unsigned int sock, struct pccard_mem_map *mem);
-static int bcm47xx_pcmcia_set_mem_map(unsigned int sock, struct pccard_mem_map *mem);
-#ifdef CONFIG_PROC_FS
-static void bcm47xx_pcmcia_proc_setup(unsigned int sock, struct proc_dir_entry *base);
-#endif
-
-static struct pccard_operations bcm47xx_pcmcia_operations = {
-	bcm47xx_pcmcia_init,
-	bcm47xx_pcmcia_suspend,
-	bcm47xx_pcmcia_register_callback,
-	bcm47xx_pcmcia_inquire_socket,
-	bcm47xx_pcmcia_get_status,
-	bcm47xx_pcmcia_get_socket,
-	bcm47xx_pcmcia_set_socket,
-	bcm47xx_pcmcia_get_io_map,
-	bcm47xx_pcmcia_set_io_map,
-	bcm47xx_pcmcia_get_mem_map,
-	bcm47xx_pcmcia_set_mem_map,
-#ifdef CONFIG_PROC_FS
-	bcm47xx_pcmcia_proc_setup
-#endif
-};
-
-
-/*
- * bcm47xx_pcmcia_driver_init()
- *
- * This routine performs a basic sanity check to ensure that this
- * kernel has been built with the appropriate board-specific low-level
- * PCMCIA support, performs low-level PCMCIA initialization, registers
- * this socket driver with Card Services, and then spawns the daemon
- * thread which is the real workhorse of the socket driver.
- *
- * Please see linux/Documentation/arm/SA1100/PCMCIA for more information
- * on the low-level kernel interface.
- *
- * Returns: 0 on success, -1 on error
- */
-static int __init bcm47xx_pcmcia_driver_init(void)
-{
-	servinfo_t info;
-	struct pcmcia_init pcmcia_init;
-	struct pcmcia_state state;
-	unsigned int i;
-	unsigned long tmp;
-
-
-	printk("\nBCM47XX PCMCIA (CS release %s)\n", CS_RELEASE);
-
-	CardServices(GetCardServicesInfo, &info);
-
-	if (info.Revision != CS_RELEASE_CODE) {
-		printk(KERN_ERR "Card Services release codes do not match\n");
-		return -1;
-	}
-
-#ifdef CONFIG_BCM4710
-	pcmcia_low_level=&bcm4710_pcmcia_ops;
-#else
-#error Unsupported Broadcom BCM47XX board.
-#endif
-
-	pcmcia_init.handler=bcm47xx_pcmcia_interrupt;
-
-	if ((socket_count = pcmcia_low_level->init(&pcmcia_init)) < 0) {
-		printk(KERN_ERR "Unable to initialize PCMCIA service.\n");
-		return -EIO;
-	} else {
-		printk("\t%d PCMCIA sockets initialized.\n", socket_count);
-	}
-
-	pcmcia_socket = 
-		kmalloc(sizeof(struct bcm47xx_pcmcia_socket) * socket_count, 
-				GFP_KERNEL);
-	memset(pcmcia_socket, 0, 
-			sizeof(struct bcm47xx_pcmcia_socket) * socket_count);
-	if (!pcmcia_socket) {
-		printk(KERN_ERR "Card Services can't get memory \n");
-		return -1;
-	}
-			
-	for (i = 0; i < socket_count; i++) {
-		if (pcmcia_low_level->socket_state(i, &state) < 0) {
-			printk(KERN_ERR "Unable to get PCMCIA status\n");
-			return -EIO;
-		}
-		pcmcia_socket[i].k_state = state;
-		pcmcia_socket[i].cs_state.csc_mask = SS_DETECT;
-		
-		if (i == 0) {
-			pcmcia_socket[i].virt_io =
-				(unsigned long)ioremap_nocache(EXTIF_PCMCIA_IOBASE(BCM4710_EXTIF), 0x1000);
-			/* Substract ioport base which gets added by in/out */
-			pcmcia_socket[i].virt_io -= mips_io_port_base;
-			pcmcia_socket[i].phys_attr =
-				(unsigned long)EXTIF_PCMCIA_CFGBASE(BCM4710_EXTIF);
-			pcmcia_socket[i].phys_mem =
-				(unsigned long)EXTIF_PCMCIA_MEMBASE(BCM4710_EXTIF);
-		} else  {
-			printk(KERN_ERR "bcm4710: socket 1 not supported\n");
-			return 1;
-		}
-	}
-
-	/* Only advertise as many sockets as we can detect: */
-	if (register_ss_entry(socket_count, &bcm47xx_pcmcia_operations) < 0) {
-		printk(KERN_ERR "Unable to register socket service routine\n");
-		return -ENXIO;
-	}
-
-	/* Start the event poll timer.  
-	 * It will reschedule by itself afterwards. 
-	 */
-	bcm47xx_pcmcia_poll_event(0);
-
-	DEBUG(1, "bcm4710: initialization complete\n");
-	return 0;
-
-}
-
-module_init(bcm47xx_pcmcia_driver_init);
-
-
-/*
- * bcm47xx_pcmcia_driver_shutdown()
- *
- * Invokes the low-level kernel service to free IRQs associated with this
- * socket controller and reset GPIO edge detection.
- */
-static void __exit bcm47xx_pcmcia_driver_shutdown(void)
-{
-	int i;
-
-	del_timer_sync(&poll_timer);
-	unregister_ss_entry(&bcm47xx_pcmcia_operations);
-	pcmcia_low_level->shutdown();
-	flush_scheduled_tasks();
-	for (i = 0; i < socket_count; i++) {
-		if (pcmcia_socket[i].virt_io) 
-			iounmap((void *)pcmcia_socket[i].virt_io);
-		if (pcmcia_socket[i].phys_attr) 
-			iounmap((void *)pcmcia_socket[i].phys_attr);
-		if (pcmcia_socket[i].phys_mem) 
-			iounmap((void *)pcmcia_socket[i].phys_mem);
-	}
-	DEBUG(1, "bcm4710: shutdown complete\n");
-}
-
-module_exit(bcm47xx_pcmcia_driver_shutdown);
-
-/*
- * bcm47xx_pcmcia_init()
- * We perform all of the interesting initialization tasks in 
- * bcm47xx_pcmcia_driver_init().
- *
- * Returns: 0
- */
-static int bcm47xx_pcmcia_init(unsigned int sock)
-{
-	DEBUG(1, "%s(): initializing socket %u\n", __FUNCTION__, sock);
-
-	return 0;
-}
-
-/*
- * bcm47xx_pcmcia_suspend()
- *
- * We don't currently perform any actions on a suspend.
- *
- * Returns: 0
- */
-static int bcm47xx_pcmcia_suspend(unsigned int sock)
-{
-	DEBUG(1, "%s(): suspending socket %u\n", __FUNCTION__, sock);
-
-	return 0;
-}
-
-
-/*
- * bcm47xx_pcmcia_events()
- *
- * Helper routine to generate a Card Services event mask based on
- * state information obtained from the kernel low-level PCMCIA layer
- * in a recent (and previous) sampling. Updates `prev_state'.
- *
- * Returns: an event mask for the given socket state.
- */
-static inline unsigned 
-bcm47xx_pcmcia_events(struct pcmcia_state *state, 
-		struct pcmcia_state *prev_state, 
-		unsigned int mask, unsigned int flags)
-{
-	unsigned int events=0;
-
-	if (state->bvd1 != prev_state->bvd1) {
-
-		DEBUG(3, "%s(): card BVD1 value %u\n", __FUNCTION__, state->bvd1);
-
-		events |= mask & (flags & SS_IOCARD) ? SS_STSCHG : SS_BATDEAD;
-	}
-
-	if (state->bvd2 != prev_state->bvd2) {
-
-		DEBUG(3, "%s(): card BVD2 value %u\n", __FUNCTION__, state->bvd2);
-
-		events |= mask & (flags & SS_IOCARD) ? 0 : SS_BATWARN;
-	}
-
-	if (state->detect != prev_state->detect) {
-
-		DEBUG(3, "%s(): card detect value %u\n", __FUNCTION__, state->detect);
-
-		events |= mask & SS_DETECT;
-	}
-
-
-	if (state->ready != prev_state->ready) {
-
-		DEBUG(3, "%s(): card ready value %u\n", __FUNCTION__, state->ready);
-
-		events |= mask & ((flags & SS_IOCARD) ? 0 : SS_READY);
-	}
-
-	if (events != 0) {
-		DEBUG(2, "events: %s%s%s%s%s\n",
-		      (events & SS_DETECT) ? "DETECT " : "",
-		      (events & SS_READY) ? "READY " : "",
-		      (events & SS_BATDEAD) ? "BATDEAD " : "",
-		      (events & SS_BATWARN) ? "BATWARN " : "",
-		      (events & SS_STSCHG) ? "STSCHG " : "");
-	}
-
-	*prev_state=*state;
-	return events;
-}
-
-
-/* 
- * bcm47xx_pcmcia_task_handler()
- *
- * Processes serviceable socket events using the "eventd" thread context.
- *
- * Event processing (specifically, the invocation of the Card Services event
- * callback) occurs in this thread rather than in the actual interrupt
- * handler due to the use of scheduling operations in the PCMCIA core.
- */
-static void bcm47xx_pcmcia_task_handler(void *data) 
-{
-	struct pcmcia_state state;
-	int i, events, irq_status;
-
-	DEBUG(4, "%s(): entering PCMCIA monitoring thread\n", __FUNCTION__);
-
-	for (i = 0; i < socket_count; i++)  {
-		if ((irq_status = pcmcia_low_level->socket_state(i, &state)) < 0)
-			printk(KERN_ERR "Error in kernel low-level PCMCIA service.\n");
-
-		events = bcm47xx_pcmcia_events(&state, 
-					       &pcmcia_socket[i].k_state, 
-					       pcmcia_socket[i].cs_state.csc_mask, 
-					       pcmcia_socket[i].cs_state.flags);
-
-		if (pcmcia_socket[i].handler != NULL) {
-			pcmcia_socket[i].handler(pcmcia_socket[i].handler_info,
-						 events);
-		}
-	}
-}
-
-static struct tq_struct bcm47xx_pcmcia_task = {
-	routine: bcm47xx_pcmcia_task_handler
-};
-
-
-/*
- * bcm47xx_pcmcia_poll_event()
- *
- * Let's poll for events in addition to IRQs since IRQ only is unreliable...
- */
-static void bcm47xx_pcmcia_poll_event(unsigned long dummy)
-{
-	DEBUG(4, "%s(): polling for events\n", __FUNCTION__);
-
-	poll_timer.function = bcm47xx_pcmcia_poll_event;
-	poll_timer.expires = jiffies + BCM47XX_PCMCIA_POLL_PERIOD;
-	add_timer(&poll_timer);
-	schedule_task(&bcm47xx_pcmcia_task);
-}
-
-
-/* 
- * bcm47xx_pcmcia_interrupt()
- *
- * Service routine for socket driver interrupts (requested by the
- * low-level PCMCIA init() operation via bcm47xx_pcmcia_thread()).
- *
- * The actual interrupt-servicing work is performed by
- * bcm47xx_pcmcia_task(), largely because the Card Services event-
- * handling code performs scheduling operations which cannot be
- * executed from within an interrupt context.
- */
-static void 
-bcm47xx_pcmcia_interrupt(int irq, void *dev, struct pt_regs *regs)
-{
-	DEBUG(3, "%s(): servicing IRQ %d\n", __FUNCTION__, irq);
-	schedule_task(&bcm47xx_pcmcia_task);
-}
-
-
-/*
- * bcm47xx_pcmcia_register_callback()
- *
- * Implements the register_callback() operation for the in-kernel
- * PCMCIA service (formerly SS_RegisterCallback in Card Services). If 
- * the function pointer `handler' is not NULL, remember the callback 
- * location in the state for `sock', and increment the usage counter 
- * for the driver module. (The callback is invoked from the interrupt
- * service routine, bcm47xx_pcmcia_interrupt(), to notify Card Services
- * of interesting events.) Otherwise, clear the callback pointer in the
- * socket state and decrement the module usage count.
- *
- * Returns: 0
- */
-static int 
-bcm47xx_pcmcia_register_callback(unsigned int sock, 
-		void (*handler)(void *, unsigned int), void *info)
-{
-	if (handler == NULL) {
-		pcmcia_socket[sock].handler = NULL;
-		MOD_DEC_USE_COUNT;
-	} else {
-		MOD_INC_USE_COUNT;
-		pcmcia_socket[sock].handler = handler;
-		pcmcia_socket[sock].handler_info = info;
-	}
-	return 0;
-}
-
-
-/*
- * bcm47xx_pcmcia_inquire_socket()
- *
- * Implements the inquire_socket() operation for the in-kernel PCMCIA
- * service (formerly SS_InquireSocket in Card Services). Of note is
- * the setting of the SS_CAP_PAGE_REGS bit in the `features' field of
- * `cap' to "trick" Card Services into tolerating large "I/O memory" 
- * addresses. Also set is SS_CAP_STATIC_MAP, which disables the memory
- * resource database check. (Mapped memory is set up within the socket
- * driver itself.)
- *
- * In conjunction with the STATIC_MAP capability is a new field,
- * `io_offset', recommended by David Hinds. Rather than go through
- * the SetIOMap interface (which is not quite suited for communicating
- * window locations up from the socket driver), we just pass up
- * an offset which is applied to client-requested base I/O addresses
- * in alloc_io_space().
- *
- * Returns: 0 on success, -1 if no pin has been configured for `sock'
- */
-static int
-bcm47xx_pcmcia_inquire_socket(unsigned int sock, socket_cap_t *cap)
-{
-	struct pcmcia_irq_info irq_info;
-
-	if (sock >= socket_count) {
-		printk(KERN_ERR "bcm47xx: socket %u not configured\n", sock);
-		return -1;
-	}
-
-	/* SS_CAP_PAGE_REGS: used by setup_cis_mem() in cistpl.c to set the
-	 *   force_low argument to validate_mem() in rsrc_mgr.c -- since in
-	 *   general, the mapped * addresses of the PCMCIA memory regions
-	 *   will not be within 0xffff, setting force_low would be
-	 *   undesirable.
-	 *
-	 * SS_CAP_STATIC_MAP: don't bother with the (user-configured) memory
-	 *   resource database; we instead pass up physical address ranges
-	 *   and allow other parts of Card Services to deal with remapping.
-	 *
-	 * SS_CAP_PCCARD: we can deal with 16-bit PCMCIA & CF cards, but
-	 *   not 32-bit CardBus devices.
-	 */
-	cap->features = (SS_CAP_PAGE_REGS  | SS_CAP_STATIC_MAP | SS_CAP_PCCARD);
-
-	irq_info.sock = sock;
-	irq_info.irq = -1;
-
-	if (pcmcia_low_level->get_irq_info(&irq_info) < 0) {
-		printk(KERN_ERR "Error obtaining IRQ info socket %u\n", sock);
-		return -1;
-	}
-
-	cap->irq_mask = 0;
-	cap->map_size = PAGE_SIZE;
-	cap->pci_irq = irq_info.irq;
-	cap->io_offset = pcmcia_socket[sock].virt_io;
-
-	return 0;
-}
-
-
-/*
- * bcm47xx_pcmcia_get_status()
- *
- * Implements the get_status() operation for the in-kernel PCMCIA
- * service (formerly SS_GetStatus in Card Services). Essentially just
- * fills in bits in `status' according to internal driver state or
- * the value of the voltage detect chipselect register.
- *
- * As a debugging note, during card startup, the PCMCIA core issues
- * three set_socket() commands in a row the first with RESET deasserted,
- * the second with RESET asserted, and the last with RESET deasserted
- * again. Following the third set_socket(), a get_status() command will
- * be issued. The kernel is looking for the SS_READY flag (see
- * setup_socket(), reset_socket(), and unreset_socket() in cs.c).
- *
- * Returns: 0
- */
-static int 
-bcm47xx_pcmcia_get_status(unsigned int sock, unsigned int *status)
-{
-	struct pcmcia_state state;
-
-
-	if ((pcmcia_low_level->socket_state(sock, &state)) < 0) {
-		printk(KERN_ERR "Unable to get PCMCIA status from kernel.\n");
-		return -1;
-	}
-
-	pcmcia_socket[sock].k_state = state;
-
-	*status = state.detect ? SS_DETECT : 0;
-
-	*status |= state.ready ? SS_READY : 0;
-
-	/* The power status of individual sockets is not available
-	 * explicitly from the hardware, so we just remember the state
-	 * and regurgitate it upon request:
-	 */
-	*status |= pcmcia_socket[sock].cs_state.Vcc ? SS_POWERON : 0;
-
-	if (pcmcia_socket[sock].cs_state.flags & SS_IOCARD)
-		*status |= state.bvd1 ? SS_STSCHG : 0;
-	else {
-		if (state.bvd1 == 0)
-			*status |= SS_BATDEAD;
-		else if (state.bvd2 == 0)
-			*status |= SS_BATWARN;
-	}
-
-	*status |= state.vs_3v ? SS_3VCARD : 0;
-
-	*status |= state.vs_Xv ? SS_XVCARD : 0;
-
-	DEBUG(2, "\tstatus: %s%s%s%s%s%s%s%s\n",
-	      (*status&SS_DETECT)?"DETECT ":"",
-	      (*status&SS_READY)?"READY ":"", 
-	      (*status&SS_BATDEAD)?"BATDEAD ":"",
-	      (*status&SS_BATWARN)?"BATWARN ":"",
-	      (*status&SS_POWERON)?"POWERON ":"",
-	      (*status&SS_STSCHG)?"STSCHG ":"",
-	      (*status&SS_3VCARD)?"3VCARD ":"",
-	      (*status&SS_XVCARD)?"XVCARD ":"");
-
-	return 0;
-}
-
-
-/*
- * bcm47xx_pcmcia_get_socket()
- *
- * Implements the get_socket() operation for the in-kernel PCMCIA
- * service (formerly SS_GetSocket in Card Services). Not a very 
- * exciting routine.
- *
- * Returns: 0
- */
-static int 
-bcm47xx_pcmcia_get_socket(unsigned int sock, socket_state_t *state)
-{
-	DEBUG(2, "%s() for sock %u\n", __FUNCTION__, sock);
-
-	/* This information was given to us in an earlier call to set_socket(),
-	 * so we're just regurgitating it here:
-	 */
-	*state = pcmcia_socket[sock].cs_state;
-	return 0;
-}
-
-
-/*
- * bcm47xx_pcmcia_set_socket()
- *
- * Implements the set_socket() operation for the in-kernel PCMCIA
- * service (formerly SS_SetSocket in Card Services). We more or
- * less punt all of this work and let the kernel handle the details
- * of power configuration, reset, &c. We also record the value of
- * `state' in order to regurgitate it to the PCMCIA core later.
- *
- * Returns: 0
- */
-static int 
-bcm47xx_pcmcia_set_socket(unsigned int sock, socket_state_t *state)
-{
-	struct pcmcia_configure configure;
-
-	DEBUG(2, "\tmask:  %s%s%s%s%s%s\n\tflags: %s%s%s%s%s%s\n"
-	      "\tVcc %d  Vpp %d  irq %d\n",
-	      (state->csc_mask == 0) ? "<NONE>" : "",
-	      (state->csc_mask & SS_DETECT) ? "DETECT " : "",
-	      (state->csc_mask & SS_READY) ? "READY " : "",
-	      (state->csc_mask & SS_BATDEAD) ? "BATDEAD " : "",
-	      (state->csc_mask & SS_BATWARN) ? "BATWARN " : "",
-	      (state->csc_mask & SS_STSCHG) ? "STSCHG " : "",
-	      (state->flags == 0) ? "<NONE>" : "",
-	      (state->flags & SS_PWR_AUTO) ? "PWR_AUTO " : "",
-	      (state->flags & SS_IOCARD) ? "IOCARD " : "",
-	      (state->flags & SS_RESET) ? "RESET " : "",
-	      (state->flags & SS_SPKR_ENA) ? "SPKR_ENA " : "",
-	      (state->flags & SS_OUTPUT_ENA) ? "OUTPUT_ENA " : "",
-	      state->Vcc, state->Vpp, state->io_irq);
-
-	configure.sock = sock;
-	configure.vcc = state->Vcc;
-	configure.vpp = state->Vpp;
-	configure.output = (state->flags & SS_OUTPUT_ENA) ? 1 : 0;
-	configure.speaker = (state->flags & SS_SPKR_ENA) ? 1 : 0;
-	configure.reset = (state->flags & SS_RESET) ? 1 : 0;
-
-	if (pcmcia_low_level->configure_socket(&configure) < 0) {
-		printk(KERN_ERR "Unable to configure socket %u\n", sock);
-		return -1;
-	}
-
-	pcmcia_socket[sock].cs_state = *state;
-	return 0;
-}
-
-
-/*
- * bcm47xx_pcmcia_get_io_map()
- *
- * Implements the get_io_map() operation for the in-kernel PCMCIA
- * service (formerly SS_GetIOMap in Card Services). Just returns an
- * I/O map descriptor which was assigned earlier by a set_io_map().
- *
- * Returns: 0 on success, -1 if the map index was out of range
- */
-static int 
-bcm47xx_pcmcia_get_io_map(unsigned int sock, struct pccard_io_map *map)
-{
-	DEBUG(2, "bcm47xx_pcmcia_get_io_map: sock %d\n", sock);
-
-	if (map->map >= MAX_IO_WIN) {
-		printk(KERN_ERR "%s(): map (%d) out of range\n", 
-		       __FUNCTION__, map->map);
-		return -1;
-	}
-
-	*map = pcmcia_socket[sock].io_map[map->map];
-	return 0;
-}
-
-
-/*
- * bcm47xx_pcmcia_set_io_map()
- *
- * Implements the set_io_map() operation for the in-kernel PCMCIA
- * service (formerly SS_SetIOMap in Card Services). We configure
- * the map speed as requested, but override the address ranges
- * supplied by Card Services.
- *
- * Returns: 0 on success, -1 on error
- */
-int 
-bcm47xx_pcmcia_set_io_map(unsigned int sock, struct pccard_io_map *map)
-{
-	unsigned int speed;
-	unsigned long start;
-
-	DEBUG(2, "\tmap %u  speed %u\n\tstart 0x%08lx  stop 0x%08lx\n"
-	      "\tflags: %s%s%s%s%s%s%s%s\n",
-	      map->map, map->speed, map->start, map->stop,
-	      (map->flags == 0) ? "<NONE>" : "",
-	      (map->flags & MAP_ACTIVE) ? "ACTIVE " : "",
-	      (map->flags & MAP_16BIT) ? "16BIT " : "",
-	      (map->flags & MAP_AUTOSZ) ? "AUTOSZ " : "",
-	      (map->flags & MAP_0WS) ? "0WS " : "",
-	      (map->flags & MAP_WRPROT) ? "WRPROT " : "",
-	      (map->flags & MAP_USE_WAIT) ? "USE_WAIT " : "",
-	      (map->flags & MAP_PREFETCH) ? "PREFETCH " : "");
-
-	if (map->map >= MAX_IO_WIN) {
-		printk(KERN_ERR "%s(): map (%d) out of range\n", 
-				__FUNCTION__, map->map);
-		return -1;
-	}
-
-	if (map->flags & MAP_ACTIVE) {
-		speed = (map->speed > 0) ? map->speed : BCM47XX_PCMCIA_IO_SPEED;
-		pcmcia_socket[sock].speed_io = speed;
-	}
-
-	start = map->start;
-
-	if (map->stop == 1) {
-		map->stop = PAGE_SIZE - 1;
-	}
-
-	map->start = pcmcia_socket[sock].virt_io;
-	map->stop = map->start + (map->stop - start);
-	pcmcia_socket[sock].io_map[map->map] = *map;
-	DEBUG(2, "set_io_map %d start %x stop %x\n", 
-	      map->map, map->start, map->stop);
-	return 0;
-}
-
-
-/*
- * bcm47xx_pcmcia_get_mem_map()
- *
- * Implements the get_mem_map() operation for the in-kernel PCMCIA
- * service (formerly SS_GetMemMap in Card Services). Just returns a
- *  memory map descriptor which was assigned earlier by a
- *  set_mem_map() request.
- *
- * Returns: 0 on success, -1 if the map index was out of range
- */
-static int 
-bcm47xx_pcmcia_get_mem_map(unsigned int sock, struct pccard_mem_map *map)
-{
-	DEBUG(2, "%s() for sock %u\n", __FUNCTION__, sock);
-
-	if (map->map >= MAX_WIN) {
-		printk(KERN_ERR "%s(): map (%d) out of range\n", 
-		       __FUNCTION__, map->map);
-		return -1;
-	}
-
-	*map = pcmcia_socket[sock].mem_map[map->map];
-	return 0;
-}
-
-
-/*
- * bcm47xx_pcmcia_set_mem_map()
- *
- * Implements the set_mem_map() operation for the in-kernel PCMCIA
- * service (formerly SS_SetMemMap in Card Services). We configure
- * the map speed as requested, but override the address ranges
- * supplied by Card Services.
- *
- * Returns: 0 on success, -1 on error
- */
-static int 
-bcm47xx_pcmcia_set_mem_map(unsigned int sock, struct pccard_mem_map *map)
-{
-	unsigned int speed;
-	unsigned long start;
-	u_long flags;
-
-	if (map->map >= MAX_WIN) {
-		printk(KERN_ERR "%s(): map (%d) out of range\n", 
-		       __FUNCTION__, map->map);
-		return -1;
-	}
-
-	DEBUG(2, "\tmap %u  speed %u\n\tsys_start  %#lx\n"
-	      "\tsys_stop   %#lx\n\tcard_start %#x\n"
-	      "\tflags: %s%s%s%s%s%s%s%s\n",
-	      map->map, map->speed, map->sys_start, map->sys_stop,
-	      map->card_start, (map->flags == 0) ? "<NONE>" : "",
-	      (map->flags & MAP_ACTIVE) ? "ACTIVE " : "",
-	      (map->flags & MAP_16BIT) ? "16BIT " : "",
-	      (map->flags & MAP_AUTOSZ) ? "AUTOSZ " : "",
-	      (map->flags & MAP_0WS) ? "0WS " : "",
-	      (map->flags & MAP_WRPROT) ? "WRPROT " : "",
-	      (map->flags & MAP_ATTRIB) ? "ATTRIB " : "",
-	      (map->flags & MAP_USE_WAIT) ? "USE_WAIT " : "");
-
-	if (map->flags & MAP_ACTIVE) {
-		/* When clients issue RequestMap, the access speed is not always
-		 * properly configured:
-		 */
-		speed = (map->speed > 0) ? map->speed : BCM47XX_PCMCIA_MEM_SPEED;
-
-		/* TBD */
-		if (map->flags & MAP_ATTRIB) {
-			pcmcia_socket[sock].speed_attr = speed;
-		} else {
-			pcmcia_socket[sock].speed_mem = speed;
-		}
-	}
-
-	save_flags(flags);
-	cli();
-	start = map->sys_start;
-
-	if (map->sys_stop == 0)
-		map->sys_stop = PAGE_SIZE - 1;
-
-	if (map->flags & MAP_ATTRIB) {
-		map->sys_start = pcmcia_socket[sock].phys_attr + 
-			map->card_start;
-	} else {
-		map->sys_start = pcmcia_socket[sock].phys_mem + 
-			map->card_start;
-	}
-
-	map->sys_stop = map->sys_start + (map->sys_stop - start);
-	pcmcia_socket[sock].mem_map[map->map] = *map;
-	restore_flags(flags);
-	DEBUG(2, "set_mem_map %d start %x stop %x card_start %x\n", 
-			map->map, map->sys_start, map->sys_stop, 
-			map->card_start);
-	return 0;
-}
-
-
-#if defined(CONFIG_PROC_FS)
-
-/*
- * bcm47xx_pcmcia_proc_setup()
- *
- * Implements the proc_setup() operation for the in-kernel PCMCIA
- * service (formerly SS_ProcSetup in Card Services).
- *
- * Returns: 0 on success, -1 on error
- */
-static void 
-bcm47xx_pcmcia_proc_setup(unsigned int sock, struct proc_dir_entry *base)
-{
-	struct proc_dir_entry *entry;
-
-	if ((entry = create_proc_entry("status", 0, base)) == NULL) {
-		printk(KERN_ERR "Unable to install \"status\" procfs entry\n");
-		return;
-	}
-
-	entry->read_proc = bcm47xx_pcmcia_proc_status;
-	entry->data = (void *)sock;
-}
-
-
-/*
- * bcm47xx_pcmcia_proc_status()
- *
- * Implements the /proc/bus/pccard/??/status file.
- *
- * Returns: the number of characters added to the buffer
- */
-static int 
-bcm47xx_pcmcia_proc_status(char *buf, char **start, off_t pos, 
-			   int count, int *eof, void *data)
-{
-	char *p = buf;
-	unsigned int sock = (unsigned int)data;
-
-	p += sprintf(p, "k_flags  : %s%s%s%s%s%s%s\n", 
-		     pcmcia_socket[sock].k_state.detect ? "detect " : "",
-		     pcmcia_socket[sock].k_state.ready ? "ready " : "",
-		     pcmcia_socket[sock].k_state.bvd1 ? "bvd1 " : "",
-		     pcmcia_socket[sock].k_state.bvd2 ? "bvd2 " : "",
-		     pcmcia_socket[sock].k_state.wrprot ? "wrprot " : "",
-		     pcmcia_socket[sock].k_state.vs_3v ? "vs_3v " : "",
-		     pcmcia_socket[sock].k_state.vs_Xv ? "vs_Xv " : "");
-
-	p += sprintf(p, "status   : %s%s%s%s%s%s%s%s%s\n",
-		     pcmcia_socket[sock].k_state.detect ? "SS_DETECT " : "",
-		     pcmcia_socket[sock].k_state.ready ? "SS_READY " : "",
-		     pcmcia_socket[sock].cs_state.Vcc ? "SS_POWERON " : "",
-		     pcmcia_socket[sock].cs_state.flags & SS_IOCARD ? "SS_IOCARD " : "",
-		     (pcmcia_socket[sock].cs_state.flags & SS_IOCARD &&
-		      pcmcia_socket[sock].k_state.bvd1) ? "SS_STSCHG " : "",
-		     ((pcmcia_socket[sock].cs_state.flags & SS_IOCARD) == 0 &&
-		      (pcmcia_socket[sock].k_state.bvd1 == 0)) ? "SS_BATDEAD " : "",
-		     ((pcmcia_socket[sock].cs_state.flags & SS_IOCARD) == 0 &&
-		      (pcmcia_socket[sock].k_state.bvd2 == 0)) ? "SS_BATWARN " : "",
-		     pcmcia_socket[sock].k_state.vs_3v ? "SS_3VCARD " : "",
-		     pcmcia_socket[sock].k_state.vs_Xv ? "SS_XVCARD " : "");
-
-	p += sprintf(p, "mask     : %s%s%s%s%s\n",
-		     pcmcia_socket[sock].cs_state.csc_mask & SS_DETECT ? "SS_DETECT " : "",
-		     pcmcia_socket[sock].cs_state.csc_mask & SS_READY ? "SS_READY " : "",
-		     pcmcia_socket[sock].cs_state.csc_mask & SS_BATDEAD ? "SS_BATDEAD " : "",
-		     pcmcia_socket[sock].cs_state.csc_mask & SS_BATWARN ? "SS_BATWARN " : "",
-		     pcmcia_socket[sock].cs_state.csc_mask & SS_STSCHG ? "SS_STSCHG " : "");
-
-	p += sprintf(p, "cs_flags : %s%s%s%s%s\n",
-		     pcmcia_socket[sock].cs_state.flags & SS_PWR_AUTO ?
-			"SS_PWR_AUTO " : "",
-		     pcmcia_socket[sock].cs_state.flags & SS_IOCARD ?
-			"SS_IOCARD " : "",
-		     pcmcia_socket[sock].cs_state.flags & SS_RESET ?
-			"SS_RESET " : "",
-		     pcmcia_socket[sock].cs_state.flags & SS_SPKR_ENA ?
-			"SS_SPKR_ENA " : "",
-		     pcmcia_socket[sock].cs_state.flags & SS_OUTPUT_ENA ?
-			"SS_OUTPUT_ENA " : "");
-
-	p += sprintf(p, "Vcc      : %d\n", pcmcia_socket[sock].cs_state.Vcc);
-	p += sprintf(p, "Vpp      : %d\n", pcmcia_socket[sock].cs_state.Vpp);
-	p += sprintf(p, "irq      : %d\n", pcmcia_socket[sock].cs_state.io_irq);
-	p += sprintf(p, "I/O      : %u\n", pcmcia_socket[sock].speed_io);
-	p += sprintf(p, "attribute: %u\n", pcmcia_socket[sock].speed_attr);
-	p += sprintf(p, "common   : %u\n", pcmcia_socket[sock].speed_mem);
-	return p-buf;
-}
-
-
-#endif  /* defined(CONFIG_PROC_FS) */
diff --git a/openwrt/package/linux/kernel-source/drivers/pcmcia/bcm4710_pcmcia.c b/openwrt/package/linux/kernel-source/drivers/pcmcia/bcm4710_pcmcia.c
deleted file mode 100644
index 6e3da040c..000000000
--- a/openwrt/package/linux/kernel-source/drivers/pcmcia/bcm4710_pcmcia.c
+++ /dev/null
@@ -1,266 +0,0 @@
-/*
- * BCM4710 specific pcmcia routines.
- *
- * Copyright 2004, Broadcom Corporation
- * All Rights Reserved.
- * 
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- *
- * $Id$
- */
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/config.h>
-#include <linux/delay.h>
-#include <linux/ioport.h>
-#include <linux/kernel.h>
-#include <linux/tqueue.h>
-#include <linux/timer.h>
-#include <linux/mm.h>
-#include <linux/proc_fs.h>
-#include <linux/version.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-
-#include <pcmcia/version.h>
-#include <pcmcia/cs_types.h>
-#include <pcmcia/cs.h>
-#include <pcmcia/ss.h>
-#include <pcmcia/bulkmem.h>
-#include <pcmcia/cistpl.h>
-#include <pcmcia/bus_ops.h>
-#include "cs_internal.h"
-
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/system.h>
-
-
-#include <typedefs.h>
-#include <bcmdevs.h>
-#include <bcm4710.h>
-#include <sbconfig.h>
-#include <sbextif.h>
-
-#include "bcm4710pcmcia.h"
-
-/* Use a static var for irq dev_id */
-static int bcm47xx_pcmcia_dev_id;
-
-/* Do we think we have a card or not? */
-static int bcm47xx_pcmcia_present = 0;
-
-
-static void bcm4710_pcmcia_reset(void)
-{
-	extifregs_t *eir;
-	unsigned long s;
-	uint32 out0, out1, outen;
-
-
-	eir = (extifregs_t *) ioremap_nocache(BCM4710_REG_EXTIF, sizeof(extifregs_t));
-
-	save_and_cli(s);
-
-	/* Use gpio7 to reset the pcmcia slot */
-	outen = readl(&eir->gpio[0].outen);
-	outen |= BCM47XX_PCMCIA_RESET;
-	out0 = readl(&eir->gpio[0].out);
-	out0 &= ~(BCM47XX_PCMCIA_RESET);
-	out1 = out0 | BCM47XX_PCMCIA_RESET;
-
-	writel(out0, &eir->gpio[0].out);
-	writel(outen, &eir->gpio[0].outen);
-	mdelay(1);
-	writel(out1, &eir->gpio[0].out);
-	mdelay(1);
-	writel(out0, &eir->gpio[0].out);
-
-	restore_flags(s);
-}
-
-
-static int bcm4710_pcmcia_init(struct pcmcia_init *init)
-{
-	struct pci_dev *pdev;
-	extifregs_t *eir;
-	uint32 outen, intp, intm, tmp;
-	uint16 *attrsp;
-	int rc = 0, i;
-	extern unsigned long bcm4710_cpu_cycle;
-
-
-	if (!(pdev = pci_find_device(VENDOR_BROADCOM, SB_EXTIF, NULL))) {
-		printk(KERN_ERR "bcm4710_pcmcia: extif not found\n");
-		return -ENODEV;
-	}
-	eir = (extifregs_t *) ioremap_nocache(pci_resource_start(pdev, 0), pci_resource_len(pdev, 0));
-
-	/* Initialize the pcmcia i/f: 16bit no swap */
-	writel(CF_EM_PCMCIA | CF_DS | CF_EN, &eir->pcmcia_config);
-
-#ifdef	notYet
-
-	/* Set the timing for memory accesses */
-	tmp = (19 / bcm4710_cpu_cycle) << 24;		/* W3 = 10nS */
-	tmp = tmp | ((29 / bcm4710_cpu_cycle) << 16);	/* W2 = 20nS */
-	tmp = tmp | ((109 / bcm4710_cpu_cycle) << 8);	/* W1 = 100nS */
-	tmp = tmp | (129 / bcm4710_cpu_cycle);		/* W0 = 120nS */
-	writel(tmp, &eir->pcmcia_memwait);		/* 0x01020a0c for a 100Mhz clock */
-
-	/* Set the timing for I/O accesses */
-	tmp = (19 / bcm4710_cpu_cycle) << 24;		/* W3 = 10nS */
-	tmp = tmp | ((29 / bcm4710_cpu_cycle) << 16);	/* W2 = 20nS */
-	tmp = tmp | ((109 / bcm4710_cpu_cycle) << 8);	/* W1 = 100nS */
-	tmp = tmp | (129 / bcm4710_cpu_cycle);		/* W0 = 120nS */
-	writel(tmp, &eir->pcmcia_iowait);		/* 0x01020a0c for a 100Mhz clock */
-
-	/* Set the timing for attribute accesses */
-	tmp = (19 / bcm4710_cpu_cycle) << 24;		/* W3 = 10nS */
-	tmp = tmp | ((29 / bcm4710_cpu_cycle) << 16);	/* W2 = 20nS */
-	tmp = tmp | ((109 / bcm4710_cpu_cycle) << 8);	/* W1 = 100nS */
-	tmp = tmp | (129 / bcm4710_cpu_cycle);		/* W0 = 120nS */
-	writel(tmp, &eir->pcmcia_attrwait);		/* 0x01020a0c for a 100Mhz clock */
-
-#endif
-	/* Make sure gpio0 and gpio5 are inputs */
-	outen = readl(&eir->gpio[0].outen);
-	outen &= ~(BCM47XX_PCMCIA_WP | BCM47XX_PCMCIA_STSCHG | BCM47XX_PCMCIA_RESET);
-	writel(outen, &eir->gpio[0].outen);
-
-	/* Issue a reset to the pcmcia socket */
-	bcm4710_pcmcia_reset();
-
-#ifdef	DO_BCM47XX_PCMCIA_INTERRUPTS
-	/* Setup gpio5 to be the STSCHG interrupt */
-	intp = readl(&eir->gpiointpolarity);
-	writel(intp | BCM47XX_PCMCIA_STSCHG, &eir->gpiointpolarity);	/* Active low */
-	intm = readl(&eir->gpiointmask);
-	writel(intm | BCM47XX_PCMCIA_STSCHG, &eir->gpiointmask);	/* Enable it */
-#endif
-
-	DEBUG(2, "bcm4710_pcmcia after reset:\n");
-	DEBUG(2, "\textstatus\t= 0x%08x:\n", readl(&eir->extstatus));
-	DEBUG(2, "\tpcmcia_config\t= 0x%08x:\n", readl(&eir->pcmcia_config));
-	DEBUG(2, "\tpcmcia_memwait\t= 0x%08x:\n", readl(&eir->pcmcia_memwait));
-	DEBUG(2, "\tpcmcia_attrwait\t= 0x%08x:\n", readl(&eir->pcmcia_attrwait));
-	DEBUG(2, "\tpcmcia_iowait\t= 0x%08x:\n", readl(&eir->pcmcia_iowait));
-	DEBUG(2, "\tgpioin\t\t= 0x%08x:\n", readl(&eir->gpioin));
-	DEBUG(2, "\tgpio_outen0\t= 0x%08x:\n", readl(&eir->gpio[0].outen));
-	DEBUG(2, "\tgpio_out0\t= 0x%08x:\n", readl(&eir->gpio[0].out));
-	DEBUG(2, "\tgpiointpolarity\t= 0x%08x:\n", readl(&eir->gpiointpolarity));
-	DEBUG(2, "\tgpiointmask\t= 0x%08x:\n", readl(&eir->gpiointmask));
-
-#ifdef	DO_BCM47XX_PCMCIA_INTERRUPTS
-	/* Request pcmcia interrupt */
-	rc =  request_irq(BCM47XX_PCMCIA_IRQ, init->handler, SA_INTERRUPT,
-			  "PCMCIA Interrupt", &bcm47xx_pcmcia_dev_id);
-#endif
-
-	attrsp = (uint16 *)ioremap_nocache(EXTIF_PCMCIA_CFGBASE(BCM4710_EXTIF), 0x1000);
-	tmp = readw(&attrsp[0]);
-	DEBUG(2, "\tattr[0] = 0x%04x\n", tmp);
-	if ((tmp == 0x7fff) || (tmp == 0x7f00)) {
-		bcm47xx_pcmcia_present = 0;
-	} else {
-		bcm47xx_pcmcia_present = 1;
-	}
-
-	/* There's only one socket */
-	return 1;
-}
-
-static int bcm4710_pcmcia_shutdown(void)
-{
-	extifregs_t *eir;
-	uint32 intm;
-
-	eir = (extifregs_t *) ioremap_nocache(BCM4710_REG_EXTIF, sizeof(extifregs_t));
-
-	/* Disable the pcmcia i/f */
-	writel(0, &eir->pcmcia_config);
-
-	/* Reset gpio's */
-	intm = readl(&eir->gpiointmask);
-	writel(intm & ~BCM47XX_PCMCIA_STSCHG, &eir->gpiointmask);	/* Disable it */
-
-	free_irq(BCM47XX_PCMCIA_IRQ, &bcm47xx_pcmcia_dev_id);
-
-	return 0;
-}
-
-static int 
-bcm4710_pcmcia_socket_state(unsigned sock, struct pcmcia_state *state)
-{
-	extifregs_t *eir;
-
-	eir = (extifregs_t *) ioremap_nocache(BCM4710_REG_EXTIF, sizeof(extifregs_t));
-
-
-	if (sock != 0) {
-		printk(KERN_ERR "bcm4710 socket_state bad sock %d\n", sock);
-		return -1;
-	}
-
-	if (bcm47xx_pcmcia_present) {
-		state->detect = 1;
-		state->ready = 1;
-		state->bvd1 = 1;
-		state->bvd2 = 1;
-		state->wrprot = (readl(&eir->gpioin) & BCM47XX_PCMCIA_WP) == BCM47XX_PCMCIA_WP; 
-		state->vs_3v = 0;
-		state->vs_Xv = 0;
-	} else {
-		state->detect = 0;
-		state->ready = 0;
-	}
-
-	return 1;
-}
-
-
-static int bcm4710_pcmcia_get_irq_info(struct pcmcia_irq_info *info)
-{
-	if (info->sock >= BCM47XX_PCMCIA_MAX_SOCK) return -1;
-
-	info->irq = BCM47XX_PCMCIA_IRQ;		
-
-	return 0;
-}
-
-
-static int 
-bcm4710_pcmcia_configure_socket(const struct pcmcia_configure *configure)
-{
-	if (configure->sock >= BCM47XX_PCMCIA_MAX_SOCK) return -1;
-
-
-	DEBUG(2, "Vcc %dV Vpp %dV output %d speaker %d reset %d\n", configure->vcc,
-	      configure->vpp, configure->output, configure->speaker, configure->reset);
-
-	if ((configure->vcc != 50) || (configure->vpp != 50)) {
-		printk("%s: bad Vcc/Vpp (%d:%d)\n", __FUNCTION__, configure->vcc, 
-		       configure->vpp);
-	}
-
-	if (configure->reset) {
-		/* Issue a reset to the pcmcia socket */
-		DEBUG(1, "%s: Reseting socket\n", __FUNCTION__);
-		bcm4710_pcmcia_reset();
-	}
-
-
-	return 0;
-}
-
-struct pcmcia_low_level bcm4710_pcmcia_ops = { 
-	bcm4710_pcmcia_init,
-	bcm4710_pcmcia_shutdown,
-	bcm4710_pcmcia_socket_state,
-	bcm4710_pcmcia_get_irq_info,
-	bcm4710_pcmcia_configure_socket
-};
-
diff --git a/openwrt/package/linux/kernel-source/drivers/pcmcia/bcm4710pcmcia.h b/openwrt/package/linux/kernel-source/drivers/pcmcia/bcm4710pcmcia.h
deleted file mode 100644
index 42a7463bd..000000000
--- a/openwrt/package/linux/kernel-source/drivers/pcmcia/bcm4710pcmcia.h
+++ /dev/null
@@ -1,118 +0,0 @@
-/*
- *
- * bcm47xx pcmcia driver
- *
- * Copyright 2004, Broadcom Corporation
- * All Rights Reserved.
- * 
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- *
- * Based on sa1100.h and include/asm-arm/arch-sa1100/pcmica.h
- *	from www.handhelds.org,
- * and au1000_generic.c from oss.sgi.com.
- *
- * $Id$
- */
-
-#if !defined(_BCM4710PCMCIA_H)
-#define _BCM4710PCMCIA_H
-
-#include <pcmcia/cs_types.h>
-#include <pcmcia/ss.h>
-#include <pcmcia/bulkmem.h>
-#include <pcmcia/cistpl.h>
-#include "cs_internal.h"
-
-
-/* The 47xx can only support one socket */
-#define BCM47XX_PCMCIA_MAX_SOCK		1
-
-/* In the bcm947xx gpio's are used for some pcmcia functions */
-#define	BCM47XX_PCMCIA_WP		0x01		/* Bit 0 is WP input */
-#define	BCM47XX_PCMCIA_STSCHG		0x20		/* Bit 5 is STSCHG input/interrupt */
-#define	BCM47XX_PCMCIA_RESET		0x80		/* Bit 7 is RESET */
-
-#define	BCM47XX_PCMCIA_IRQ		2
-
-/* The socket driver actually works nicely in interrupt-driven form,
- * so the (relatively infrequent) polling is "just to be sure."
- */
-#define BCM47XX_PCMCIA_POLL_PERIOD    (2 * HZ)
-
-#define BCM47XX_PCMCIA_IO_SPEED       (255)
-#define BCM47XX_PCMCIA_MEM_SPEED      (300)
-
-
-struct pcmcia_state {
-	unsigned detect: 1,
-		ready: 1,
-		bvd1: 1,
-		bvd2: 1,
-		wrprot: 1,
-		vs_3v: 1,
-		vs_Xv: 1;
-};
-
-
-struct pcmcia_configure {
-	unsigned sock: 8,
-		vcc: 8,
-		vpp: 8,
-		output: 1,
-		speaker: 1,
-		reset: 1;
-};
-
-struct pcmcia_irq_info {
-	unsigned int sock;
-	unsigned int irq;
-};
-
-/* This structure encapsulates per-socket state which we might need to
- * use when responding to a Card Services query of some kind.
- */
-struct bcm47xx_pcmcia_socket {
-  socket_state_t        cs_state;
-  struct pcmcia_state   k_state;
-  unsigned int          irq;
-  void                  (*handler)(void *, unsigned int);
-  void                  *handler_info;
-  pccard_io_map         io_map[MAX_IO_WIN];
-  pccard_mem_map        mem_map[MAX_WIN];
-  ioaddr_t              virt_io, phys_attr, phys_mem;
-  unsigned short        speed_io, speed_attr, speed_mem;
-};
-
-struct pcmcia_init {
-	void (*handler)(int irq, void *dev, struct pt_regs *regs);
-};
-
-struct pcmcia_low_level {
-	int (*init)(struct pcmcia_init *);
-	int (*shutdown)(void);
-	int (*socket_state)(unsigned sock, struct pcmcia_state *);
-	int (*get_irq_info)(struct pcmcia_irq_info *);
-	int (*configure_socket)(const struct pcmcia_configure *);
-};
-
-extern struct pcmcia_low_level bcm47xx_pcmcia_ops;
-
-/* I/O pins replacing memory pins
- * (PCMCIA System Architecture, 2nd ed., by Don Anderson, p.75)
- *
- * These signals change meaning when going from memory-only to 
- * memory-or-I/O interface:
- */
-#define iostschg bvd1
-#define iospkr   bvd2
-
-
-/*
- * Declaration for implementation specific low_level operations.
- */
-extern struct pcmcia_low_level bcm4710_pcmcia_ops;
-
-#endif  /* !defined(_BCM4710PCMCIA_H) */