diff options
author | wbx <wbx@3c298f89-4303-0410-b956-a3cf2f4a3e73> | 2005-03-16 13:50:00 +0000 |
---|---|---|
committer | wbx <wbx@3c298f89-4303-0410-b956-a3cf2f4a3e73> | 2005-03-16 13:50:00 +0000 |
commit | 2cea1e6b9aa20af4040e87e88f9d4d2017cc2233 (patch) | |
tree | 5cd5a5f93b8b203d2343d5ade6e35ebd6b99f55d /openwrt/package/linux/kernel-source/drivers/pcmcia | |
parent | cfb6561e9bd4c5db6a6323525f0b5383e0649c5f (diff) |
add all source code from linksys/broadcom which is free, to cvs for better maintainence inside
openwrt. this gives us the ability to better support different hardware models, without changing
any external tar-balls. only et.o and wl.o is missing and is fetched from my webserver.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@379 3c298f89-4303-0410-b956-a3cf2f4a3e73
Diffstat (limited to 'openwrt/package/linux/kernel-source/drivers/pcmcia')
3 files changed, 1296 insertions, 0 deletions
diff --git a/openwrt/package/linux/kernel-source/drivers/pcmcia/bcm4710_generic.c b/openwrt/package/linux/kernel-source/drivers/pcmcia/bcm4710_generic.c new file mode 100644 index 000000000..18eba4679 --- /dev/null +++ b/openwrt/package/linux/kernel-source/drivers/pcmcia/bcm4710_generic.c @@ -0,0 +1,912 @@ +/* + * + * bcm47xx pcmcia driver + * + * Copyright 2004, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * + * Based on sa1100_generic.c from www.handhelds.org, + * and au1000_generic.c from oss.sgi.com. + * + * $Id$ + */ +#include <linux/module.h> +#include <linux/init.h> +#include <linux/config.h> +#include <linux/delay.h> +#include <linux/ioport.h> +#include <linux/kernel.h> +#include <linux/tqueue.h> +#include <linux/timer.h> +#include <linux/mm.h> +#include <linux/proc_fs.h> +#include <linux/version.h> +#include <linux/types.h> +#include <linux/vmalloc.h> + +#include <pcmcia/version.h> +#include <pcmcia/cs_types.h> +#include <pcmcia/cs.h> +#include <pcmcia/ss.h> +#include <pcmcia/bulkmem.h> +#include <pcmcia/cistpl.h> +#include <pcmcia/bus_ops.h> +#include "cs_internal.h" + +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/system.h> + +#include <typedefs.h> +#include <bcm4710.h> +#include <sbextif.h> + +#include "bcm4710pcmcia.h" + +#ifdef PCMCIA_DEBUG +static int pc_debug = PCMCIA_DEBUG; +#endif + +MODULE_DESCRIPTION("Linux PCMCIA Card Services: bcm47xx Socket Controller"); + +/* This structure maintains housekeeping state for each socket, such + * as the last known values of the card detect pins, or the Card Services + * callback value associated with the socket: + */ +static struct bcm47xx_pcmcia_socket *pcmcia_socket; +static int socket_count; + + +/* Returned by the low-level PCMCIA interface: */ +static struct pcmcia_low_level *pcmcia_low_level; + +/* Event poll timer structure */ +static struct timer_list poll_timer; + + +/* Prototypes for routines which are used internally: */ + +static int bcm47xx_pcmcia_driver_init(void); +static void bcm47xx_pcmcia_driver_shutdown(void); +static void bcm47xx_pcmcia_task_handler(void *data); +static void bcm47xx_pcmcia_poll_event(unsigned long data); +static void bcm47xx_pcmcia_interrupt(int irq, void *dev, struct pt_regs *regs); +static struct tq_struct bcm47xx_pcmcia_task; + +#ifdef CONFIG_PROC_FS +static int bcm47xx_pcmcia_proc_status(char *buf, char **start, + off_t pos, int count, int *eof, void *data); +#endif + + +/* Prototypes for operations which are exported to the + * in-kernel PCMCIA core: + */ + +static int bcm47xx_pcmcia_init(unsigned int sock); +static int bcm47xx_pcmcia_suspend(unsigned int sock); +static int bcm47xx_pcmcia_register_callback(unsigned int sock, + void (*handler)(void *, unsigned int), void *info); +static int bcm47xx_pcmcia_inquire_socket(unsigned int sock, socket_cap_t *cap); +static int bcm47xx_pcmcia_get_status(unsigned int sock, u_int *value); +static int bcm47xx_pcmcia_get_socket(unsigned int sock, socket_state_t *state); +static int bcm47xx_pcmcia_set_socket(unsigned int sock, socket_state_t *state); +static int bcm47xx_pcmcia_get_io_map(unsigned int sock, struct pccard_io_map *io); +static int bcm47xx_pcmcia_set_io_map(unsigned int sock, struct pccard_io_map *io); +static int bcm47xx_pcmcia_get_mem_map(unsigned int sock, struct pccard_mem_map *mem); +static int bcm47xx_pcmcia_set_mem_map(unsigned int sock, struct pccard_mem_map *mem); +#ifdef CONFIG_PROC_FS +static void bcm47xx_pcmcia_proc_setup(unsigned int sock, struct proc_dir_entry *base); +#endif + +static struct pccard_operations bcm47xx_pcmcia_operations = { + bcm47xx_pcmcia_init, + bcm47xx_pcmcia_suspend, + bcm47xx_pcmcia_register_callback, + bcm47xx_pcmcia_inquire_socket, + bcm47xx_pcmcia_get_status, + bcm47xx_pcmcia_get_socket, + bcm47xx_pcmcia_set_socket, + bcm47xx_pcmcia_get_io_map, + bcm47xx_pcmcia_set_io_map, + bcm47xx_pcmcia_get_mem_map, + bcm47xx_pcmcia_set_mem_map, +#ifdef CONFIG_PROC_FS + bcm47xx_pcmcia_proc_setup +#endif +}; + + +/* + * bcm47xx_pcmcia_driver_init() + * + * This routine performs a basic sanity check to ensure that this + * kernel has been built with the appropriate board-specific low-level + * PCMCIA support, performs low-level PCMCIA initialization, registers + * this socket driver with Card Services, and then spawns the daemon + * thread which is the real workhorse of the socket driver. + * + * Please see linux/Documentation/arm/SA1100/PCMCIA for more information + * on the low-level kernel interface. + * + * Returns: 0 on success, -1 on error + */ +static int __init bcm47xx_pcmcia_driver_init(void) +{ + servinfo_t info; + struct pcmcia_init pcmcia_init; + struct pcmcia_state state; + unsigned int i; + unsigned long tmp; + + + printk("\nBCM47XX PCMCIA (CS release %s)\n", CS_RELEASE); + + CardServices(GetCardServicesInfo, &info); + + if (info.Revision != CS_RELEASE_CODE) { + printk(KERN_ERR "Card Services release codes do not match\n"); + return -1; + } + +#ifdef CONFIG_BCM4710 + pcmcia_low_level=&bcm4710_pcmcia_ops; +#else +#error Unsupported Broadcom BCM47XX board. +#endif + + pcmcia_init.handler=bcm47xx_pcmcia_interrupt; + + if ((socket_count = pcmcia_low_level->init(&pcmcia_init)) < 0) { + printk(KERN_ERR "Unable to initialize PCMCIA service.\n"); + return -EIO; + } else { + printk("\t%d PCMCIA sockets initialized.\n", socket_count); + } + + pcmcia_socket = + kmalloc(sizeof(struct bcm47xx_pcmcia_socket) * socket_count, + GFP_KERNEL); + memset(pcmcia_socket, 0, + sizeof(struct bcm47xx_pcmcia_socket) * socket_count); + if (!pcmcia_socket) { + printk(KERN_ERR "Card Services can't get memory \n"); + return -1; + } + + for (i = 0; i < socket_count; i++) { + if (pcmcia_low_level->socket_state(i, &state) < 0) { + printk(KERN_ERR "Unable to get PCMCIA status\n"); + return -EIO; + } + pcmcia_socket[i].k_state = state; + pcmcia_socket[i].cs_state.csc_mask = SS_DETECT; + + if (i == 0) { + pcmcia_socket[i].virt_io = + (unsigned long)ioremap_nocache(EXTIF_PCMCIA_IOBASE(BCM4710_EXTIF), 0x1000); + /* Substract ioport base which gets added by in/out */ + pcmcia_socket[i].virt_io -= mips_io_port_base; + pcmcia_socket[i].phys_attr = + (unsigned long)EXTIF_PCMCIA_CFGBASE(BCM4710_EXTIF); + pcmcia_socket[i].phys_mem = + (unsigned long)EXTIF_PCMCIA_MEMBASE(BCM4710_EXTIF); + } else { + printk(KERN_ERR "bcm4710: socket 1 not supported\n"); + return 1; + } + } + + /* Only advertise as many sockets as we can detect: */ + if (register_ss_entry(socket_count, &bcm47xx_pcmcia_operations) < 0) { + printk(KERN_ERR "Unable to register socket service routine\n"); + return -ENXIO; + } + + /* Start the event poll timer. + * It will reschedule by itself afterwards. + */ + bcm47xx_pcmcia_poll_event(0); + + DEBUG(1, "bcm4710: initialization complete\n"); + return 0; + +} + +module_init(bcm47xx_pcmcia_driver_init); + + +/* + * bcm47xx_pcmcia_driver_shutdown() + * + * Invokes the low-level kernel service to free IRQs associated with this + * socket controller and reset GPIO edge detection. + */ +static void __exit bcm47xx_pcmcia_driver_shutdown(void) +{ + int i; + + del_timer_sync(&poll_timer); + unregister_ss_entry(&bcm47xx_pcmcia_operations); + pcmcia_low_level->shutdown(); + flush_scheduled_tasks(); + for (i = 0; i < socket_count; i++) { + if (pcmcia_socket[i].virt_io) + iounmap((void *)pcmcia_socket[i].virt_io); + if (pcmcia_socket[i].phys_attr) + iounmap((void *)pcmcia_socket[i].phys_attr); + if (pcmcia_socket[i].phys_mem) + iounmap((void *)pcmcia_socket[i].phys_mem); + } + DEBUG(1, "bcm4710: shutdown complete\n"); +} + +module_exit(bcm47xx_pcmcia_driver_shutdown); + +/* + * bcm47xx_pcmcia_init() + * We perform all of the interesting initialization tasks in + * bcm47xx_pcmcia_driver_init(). + * + * Returns: 0 + */ +static int bcm47xx_pcmcia_init(unsigned int sock) +{ + DEBUG(1, "%s(): initializing socket %u\n", __FUNCTION__, sock); + + return 0; +} + +/* + * bcm47xx_pcmcia_suspend() + * + * We don't currently perform any actions on a suspend. + * + * Returns: 0 + */ +static int bcm47xx_pcmcia_suspend(unsigned int sock) +{ + DEBUG(1, "%s(): suspending socket %u\n", __FUNCTION__, sock); + + return 0; +} + + +/* + * bcm47xx_pcmcia_events() + * + * Helper routine to generate a Card Services event mask based on + * state information obtained from the kernel low-level PCMCIA layer + * in a recent (and previous) sampling. Updates `prev_state'. + * + * Returns: an event mask for the given socket state. + */ +static inline unsigned +bcm47xx_pcmcia_events(struct pcmcia_state *state, + struct pcmcia_state *prev_state, + unsigned int mask, unsigned int flags) +{ + unsigned int events=0; + + if (state->bvd1 != prev_state->bvd1) { + + DEBUG(3, "%s(): card BVD1 value %u\n", __FUNCTION__, state->bvd1); + + events |= mask & (flags & SS_IOCARD) ? SS_STSCHG : SS_BATDEAD; + } + + if (state->bvd2 != prev_state->bvd2) { + + DEBUG(3, "%s(): card BVD2 value %u\n", __FUNCTION__, state->bvd2); + + events |= mask & (flags & SS_IOCARD) ? 0 : SS_BATWARN; + } + + if (state->detect != prev_state->detect) { + + DEBUG(3, "%s(): card detect value %u\n", __FUNCTION__, state->detect); + + events |= mask & SS_DETECT; + } + + + if (state->ready != prev_state->ready) { + + DEBUG(3, "%s(): card ready value %u\n", __FUNCTION__, state->ready); + + events |= mask & ((flags & SS_IOCARD) ? 0 : SS_READY); + } + + if (events != 0) { + DEBUG(2, "events: %s%s%s%s%s\n", + (events & SS_DETECT) ? "DETECT " : "", + (events & SS_READY) ? "READY " : "", + (events & SS_BATDEAD) ? "BATDEAD " : "", + (events & SS_BATWARN) ? "BATWARN " : "", + (events & SS_STSCHG) ? "STSCHG " : ""); + } + + *prev_state=*state; + return events; +} + + +/* + * bcm47xx_pcmcia_task_handler() + * + * Processes serviceable socket events using the "eventd" thread context. + * + * Event processing (specifically, the invocation of the Card Services event + * callback) occurs in this thread rather than in the actual interrupt + * handler due to the use of scheduling operations in the PCMCIA core. + */ +static void bcm47xx_pcmcia_task_handler(void *data) +{ + struct pcmcia_state state; + int i, events, irq_status; + + DEBUG(4, "%s(): entering PCMCIA monitoring thread\n", __FUNCTION__); + + for (i = 0; i < socket_count; i++) { + if ((irq_status = pcmcia_low_level->socket_state(i, &state)) < 0) + printk(KERN_ERR "Error in kernel low-level PCMCIA service.\n"); + + events = bcm47xx_pcmcia_events(&state, + &pcmcia_socket[i].k_state, + pcmcia_socket[i].cs_state.csc_mask, + pcmcia_socket[i].cs_state.flags); + + if (pcmcia_socket[i].handler != NULL) { + pcmcia_socket[i].handler(pcmcia_socket[i].handler_info, + events); + } + } +} + +static struct tq_struct bcm47xx_pcmcia_task = { + routine: bcm47xx_pcmcia_task_handler +}; + + +/* + * bcm47xx_pcmcia_poll_event() + * + * Let's poll for events in addition to IRQs since IRQ only is unreliable... + */ +static void bcm47xx_pcmcia_poll_event(unsigned long dummy) +{ + DEBUG(4, "%s(): polling for events\n", __FUNCTION__); + + poll_timer.function = bcm47xx_pcmcia_poll_event; + poll_timer.expires = jiffies + BCM47XX_PCMCIA_POLL_PERIOD; + add_timer(&poll_timer); + schedule_task(&bcm47xx_pcmcia_task); +} + + +/* + * bcm47xx_pcmcia_interrupt() + * + * Service routine for socket driver interrupts (requested by the + * low-level PCMCIA init() operation via bcm47xx_pcmcia_thread()). + * + * The actual interrupt-servicing work is performed by + * bcm47xx_pcmcia_task(), largely because the Card Services event- + * handling code performs scheduling operations which cannot be + * executed from within an interrupt context. + */ +static void +bcm47xx_pcmcia_interrupt(int irq, void *dev, struct pt_regs *regs) +{ + DEBUG(3, "%s(): servicing IRQ %d\n", __FUNCTION__, irq); + schedule_task(&bcm47xx_pcmcia_task); +} + + +/* + * bcm47xx_pcmcia_register_callback() + * + * Implements the register_callback() operation for the in-kernel + * PCMCIA service (formerly SS_RegisterCallback in Card Services). If + * the function pointer `handler' is not NULL, remember the callback + * location in the state for `sock', and increment the usage counter + * for the driver module. (The callback is invoked from the interrupt + * service routine, bcm47xx_pcmcia_interrupt(), to notify Card Services + * of interesting events.) Otherwise, clear the callback pointer in the + * socket state and decrement the module usage count. + * + * Returns: 0 + */ +static int +bcm47xx_pcmcia_register_callback(unsigned int sock, + void (*handler)(void *, unsigned int), void *info) +{ + if (handler == NULL) { + pcmcia_socket[sock].handler = NULL; + MOD_DEC_USE_COUNT; + } else { + MOD_INC_USE_COUNT; + pcmcia_socket[sock].handler = handler; + pcmcia_socket[sock].handler_info = info; + } + return 0; +} + + +/* + * bcm47xx_pcmcia_inquire_socket() + * + * Implements the inquire_socket() operation for the in-kernel PCMCIA + * service (formerly SS_InquireSocket in Card Services). Of note is + * the setting of the SS_CAP_PAGE_REGS bit in the `features' field of + * `cap' to "trick" Card Services into tolerating large "I/O memory" + * addresses. Also set is SS_CAP_STATIC_MAP, which disables the memory + * resource database check. (Mapped memory is set up within the socket + * driver itself.) + * + * In conjunction with the STATIC_MAP capability is a new field, + * `io_offset', recommended by David Hinds. Rather than go through + * the SetIOMap interface (which is not quite suited for communicating + * window locations up from the socket driver), we just pass up + * an offset which is applied to client-requested base I/O addresses + * in alloc_io_space(). + * + * Returns: 0 on success, -1 if no pin has been configured for `sock' + */ +static int +bcm47xx_pcmcia_inquire_socket(unsigned int sock, socket_cap_t *cap) +{ + struct pcmcia_irq_info irq_info; + + if (sock >= socket_count) { + printk(KERN_ERR "bcm47xx: socket %u not configured\n", sock); + return -1; + } + + /* SS_CAP_PAGE_REGS: used by setup_cis_mem() in cistpl.c to set the + * force_low argument to validate_mem() in rsrc_mgr.c -- since in + * general, the mapped * addresses of the PCMCIA memory regions + * will not be within 0xffff, setting force_low would be + * undesirable. + * + * SS_CAP_STATIC_MAP: don't bother with the (user-configured) memory + * resource database; we instead pass up physical address ranges + * and allow other parts of Card Services to deal with remapping. + * + * SS_CAP_PCCARD: we can deal with 16-bit PCMCIA & CF cards, but + * not 32-bit CardBus devices. + */ + cap->features = (SS_CAP_PAGE_REGS | SS_CAP_STATIC_MAP | SS_CAP_PCCARD); + + irq_info.sock = sock; + irq_info.irq = -1; + + if (pcmcia_low_level->get_irq_info(&irq_info) < 0) { + printk(KERN_ERR "Error obtaining IRQ info socket %u\n", sock); + return -1; + } + + cap->irq_mask = 0; + cap->map_size = PAGE_SIZE; + cap->pci_irq = irq_info.irq; + cap->io_offset = pcmcia_socket[sock].virt_io; + + return 0; +} + + +/* + * bcm47xx_pcmcia_get_status() + * + * Implements the get_status() operation for the in-kernel PCMCIA + * service (formerly SS_GetStatus in Card Services). Essentially just + * fills in bits in `status' according to internal driver state or + * the value of the voltage detect chipselect register. + * + * As a debugging note, during card startup, the PCMCIA core issues + * three set_socket() commands in a row the first with RESET deasserted, + * the second with RESET asserted, and the last with RESET deasserted + * again. Following the third set_socket(), a get_status() command will + * be issued. The kernel is looking for the SS_READY flag (see + * setup_socket(), reset_socket(), and unreset_socket() in cs.c). + * + * Returns: 0 + */ +static int +bcm47xx_pcmcia_get_status(unsigned int sock, unsigned int *status) +{ + struct pcmcia_state state; + + + if ((pcmcia_low_level->socket_state(sock, &state)) < 0) { + printk(KERN_ERR "Unable to get PCMCIA status from kernel.\n"); + return -1; + } + + pcmcia_socket[sock].k_state = state; + + *status = state.detect ? SS_DETECT : 0; + + *status |= state.ready ? SS_READY : 0; + + /* The power status of individual sockets is not available + * explicitly from the hardware, so we just remember the state + * and regurgitate it upon request: + */ + *status |= pcmcia_socket[sock].cs_state.Vcc ? SS_POWERON : 0; + + if (pcmcia_socket[sock].cs_state.flags & SS_IOCARD) + *status |= state.bvd1 ? SS_STSCHG : 0; + else { + if (state.bvd1 == 0) + *status |= SS_BATDEAD; + else if (state.bvd2 == 0) + *status |= SS_BATWARN; + } + + *status |= state.vs_3v ? SS_3VCARD : 0; + + *status |= state.vs_Xv ? SS_XVCARD : 0; + + DEBUG(2, "\tstatus: %s%s%s%s%s%s%s%s\n", + (*status&SS_DETECT)?"DETECT ":"", + (*status&SS_READY)?"READY ":"", + (*status&SS_BATDEAD)?"BATDEAD ":"", + (*status&SS_BATWARN)?"BATWARN ":"", + (*status&SS_POWERON)?"POWERON ":"", + (*status&SS_STSCHG)?"STSCHG ":"", + (*status&SS_3VCARD)?"3VCARD ":"", + (*status&SS_XVCARD)?"XVCARD ":""); + + return 0; +} + + +/* + * bcm47xx_pcmcia_get_socket() + * + * Implements the get_socket() operation for the in-kernel PCMCIA + * service (formerly SS_GetSocket in Card Services). Not a very + * exciting routine. + * + * Returns: 0 + */ +static int +bcm47xx_pcmcia_get_socket(unsigned int sock, socket_state_t *state) +{ + DEBUG(2, "%s() for sock %u\n", __FUNCTION__, sock); + + /* This information was given to us in an earlier call to set_socket(), + * so we're just regurgitating it here: + */ + *state = pcmcia_socket[sock].cs_state; + return 0; +} + + +/* + * bcm47xx_pcmcia_set_socket() + * + * Implements the set_socket() operation for the in-kernel PCMCIA + * service (formerly SS_SetSocket in Card Services). We more or + * less punt all of this work and let the kernel handle the details + * of power configuration, reset, &c. We also record the value of + * `state' in order to regurgitate it to the PCMCIA core later. + * + * Returns: 0 + */ +static int +bcm47xx_pcmcia_set_socket(unsigned int sock, socket_state_t *state) +{ + struct pcmcia_configure configure; + + DEBUG(2, "\tmask: %s%s%s%s%s%s\n\tflags: %s%s%s%s%s%s\n" + "\tVcc %d Vpp %d irq %d\n", + (state->csc_mask == 0) ? "<NONE>" : "", + (state->csc_mask & SS_DETECT) ? "DETECT " : "", + (state->csc_mask & SS_READY) ? "READY " : "", + (state->csc_mask & SS_BATDEAD) ? "BATDEAD " : "", + (state->csc_mask & SS_BATWARN) ? "BATWARN " : "", + (state->csc_mask & SS_STSCHG) ? "STSCHG " : "", + (state->flags == 0) ? "<NONE>" : "", + (state->flags & SS_PWR_AUTO) ? "PWR_AUTO " : "", + (state->flags & SS_IOCARD) ? "IOCARD " : "", + (state->flags & SS_RESET) ? "RESET " : "", + (state->flags & SS_SPKR_ENA) ? "SPKR_ENA " : "", + (state->flags & SS_OUTPUT_ENA) ? "OUTPUT_ENA " : "", + state->Vcc, state->Vpp, state->io_irq); + + configure.sock = sock; + configure.vcc = state->Vcc; + configure.vpp = state->Vpp; + configure.output = (state->flags & SS_OUTPUT_ENA) ? 1 : 0; + configure.speaker = (state->flags & SS_SPKR_ENA) ? 1 : 0; + configure.reset = (state->flags & SS_RESET) ? 1 : 0; + + if (pcmcia_low_level->configure_socket(&configure) < 0) { + printk(KERN_ERR "Unable to configure socket %u\n", sock); + return -1; + } + + pcmcia_socket[sock].cs_state = *state; + return 0; +} + + +/* + * bcm47xx_pcmcia_get_io_map() + * + * Implements the get_io_map() operation for the in-kernel PCMCIA + * service (formerly SS_GetIOMap in Card Services). Just returns an + * I/O map descriptor which was assigned earlier by a set_io_map(). + * + * Returns: 0 on success, -1 if the map index was out of range + */ +static int +bcm47xx_pcmcia_get_io_map(unsigned int sock, struct pccard_io_map *map) +{ + DEBUG(2, "bcm47xx_pcmcia_get_io_map: sock %d\n", sock); + + if (map->map >= MAX_IO_WIN) { + printk(KERN_ERR "%s(): map (%d) out of range\n", + __FUNCTION__, map->map); + return -1; + } + + *map = pcmcia_socket[sock].io_map[map->map]; + return 0; +} + + +/* + * bcm47xx_pcmcia_set_io_map() + * + * Implements the set_io_map() operation for the in-kernel PCMCIA + * service (formerly SS_SetIOMap in Card Services). We configure + * the map speed as requested, but override the address ranges + * supplied by Card Services. + * + * Returns: 0 on success, -1 on error + */ +int +bcm47xx_pcmcia_set_io_map(unsigned int sock, struct pccard_io_map *map) +{ + unsigned int speed; + unsigned long start; + + DEBUG(2, "\tmap %u speed %u\n\tstart 0x%08lx stop 0x%08lx\n" + "\tflags: %s%s%s%s%s%s%s%s\n", + map->map, map->speed, map->start, map->stop, + (map->flags == 0) ? "<NONE>" : "", + (map->flags & MAP_ACTIVE) ? "ACTIVE " : "", + (map->flags & MAP_16BIT) ? "16BIT " : "", + (map->flags & MAP_AUTOSZ) ? "AUTOSZ " : "", + (map->flags & MAP_0WS) ? "0WS " : "", + (map->flags & MAP_WRPROT) ? "WRPROT " : "", + (map->flags & MAP_USE_WAIT) ? "USE_WAIT " : "", + (map->flags & MAP_PREFETCH) ? "PREFETCH " : ""); + + if (map->map >= MAX_IO_WIN) { + printk(KERN_ERR "%s(): map (%d) out of range\n", + __FUNCTION__, map->map); + return -1; + } + + if (map->flags & MAP_ACTIVE) { + speed = (map->speed > 0) ? map->speed : BCM47XX_PCMCIA_IO_SPEED; + pcmcia_socket[sock].speed_io = speed; + } + + start = map->start; + + if (map->stop == 1) { + map->stop = PAGE_SIZE - 1; + } + + map->start = pcmcia_socket[sock].virt_io; + map->stop = map->start + (map->stop - start); + pcmcia_socket[sock].io_map[map->map] = *map; + DEBUG(2, "set_io_map %d start %x stop %x\n", + map->map, map->start, map->stop); + return 0; +} + + +/* + * bcm47xx_pcmcia_get_mem_map() + * + * Implements the get_mem_map() operation for the in-kernel PCMCIA + * service (formerly SS_GetMemMap in Card Services). Just returns a + * memory map descriptor which was assigned earlier by a + * set_mem_map() request. + * + * Returns: 0 on success, -1 if the map index was out of range + */ +static int +bcm47xx_pcmcia_get_mem_map(unsigned int sock, struct pccard_mem_map *map) +{ + DEBUG(2, "%s() for sock %u\n", __FUNCTION__, sock); + + if (map->map >= MAX_WIN) { + printk(KERN_ERR "%s(): map (%d) out of range\n", + __FUNCTION__, map->map); + return -1; + } + + *map = pcmcia_socket[sock].mem_map[map->map]; + return 0; +} + + +/* + * bcm47xx_pcmcia_set_mem_map() + * + * Implements the set_mem_map() operation for the in-kernel PCMCIA + * service (formerly SS_SetMemMap in Card Services). We configure + * the map speed as requested, but override the address ranges + * supplied by Card Services. + * + * Returns: 0 on success, -1 on error + */ +static int +bcm47xx_pcmcia_set_mem_map(unsigned int sock, struct pccard_mem_map *map) +{ + unsigned int speed; + unsigned long start; + u_long flags; + + if (map->map >= MAX_WIN) { + printk(KERN_ERR "%s(): map (%d) out of range\n", + __FUNCTION__, map->map); + return -1; + } + + DEBUG(2, "\tmap %u speed %u\n\tsys_start %#lx\n" + "\tsys_stop %#lx\n\tcard_start %#x\n" + "\tflags: %s%s%s%s%s%s%s%s\n", + map->map, map->speed, map->sys_start, map->sys_stop, + map->card_start, (map->flags == 0) ? "<NONE>" : "", + (map->flags & MAP_ACTIVE) ? "ACTIVE " : "", + (map->flags & MAP_16BIT) ? "16BIT " : "", + (map->flags & MAP_AUTOSZ) ? "AUTOSZ " : "", + (map->flags & MAP_0WS) ? "0WS " : "", + (map->flags & MAP_WRPROT) ? "WRPROT " : "", + (map->flags & MAP_ATTRIB) ? "ATTRIB " : "", + (map->flags & MAP_USE_WAIT) ? "USE_WAIT " : ""); + + if (map->flags & MAP_ACTIVE) { + /* When clients issue RequestMap, the access speed is not always + * properly configured: + */ + speed = (map->speed > 0) ? map->speed : BCM47XX_PCMCIA_MEM_SPEED; + + /* TBD */ + if (map->flags & MAP_ATTRIB) { + pcmcia_socket[sock].speed_attr = speed; + } else { + pcmcia_socket[sock].speed_mem = speed; + } + } + + save_flags(flags); + cli(); + start = map->sys_start; + + if (map->sys_stop == 0) + map->sys_stop = PAGE_SIZE - 1; + + if (map->flags & MAP_ATTRIB) { + map->sys_start = pcmcia_socket[sock].phys_attr + + map->card_start; + } else { + map->sys_start = pcmcia_socket[sock].phys_mem + + map->card_start; + } + + map->sys_stop = map->sys_start + (map->sys_stop - start); + pcmcia_socket[sock].mem_map[map->map] = *map; + restore_flags(flags); + DEBUG(2, "set_mem_map %d start %x stop %x card_start %x\n", + map->map, map->sys_start, map->sys_stop, + map->card_start); + return 0; +} + + +#if defined(CONFIG_PROC_FS) + +/* + * bcm47xx_pcmcia_proc_setup() + * + * Implements the proc_setup() operation for the in-kernel PCMCIA + * service (formerly SS_ProcSetup in Card Services). + * + * Returns: 0 on success, -1 on error + */ +static void +bcm47xx_pcmcia_proc_setup(unsigned int sock, struct proc_dir_entry *base) +{ + struct proc_dir_entry *entry; + + if ((entry = create_proc_entry("status", 0, base)) == NULL) { + printk(KERN_ERR "Unable to install \"status\" procfs entry\n"); + return; + } + + entry->read_proc = bcm47xx_pcmcia_proc_status; + entry->data = (void *)sock; +} + + +/* + * bcm47xx_pcmcia_proc_status() + * + * Implements the /proc/bus/pccard/??/status file. + * + * Returns: the number of characters added to the buffer + */ +static int +bcm47xx_pcmcia_proc_status(char *buf, char **start, off_t pos, + int count, int *eof, void *data) +{ + char *p = buf; + unsigned int sock = (unsigned int)data; + + p += sprintf(p, "k_flags : %s%s%s%s%s%s%s\n", + pcmcia_socket[sock].k_state.detect ? "detect " : "", + pcmcia_socket[sock].k_state.ready ? "ready " : "", + pcmcia_socket[sock].k_state.bvd1 ? "bvd1 " : "", + pcmcia_socket[sock].k_state.bvd2 ? "bvd2 " : "", + pcmcia_socket[sock].k_state.wrprot ? "wrprot " : "", + pcmcia_socket[sock].k_state.vs_3v ? "vs_3v " : "", + pcmcia_socket[sock].k_state.vs_Xv ? "vs_Xv " : ""); + + p += sprintf(p, "status : %s%s%s%s%s%s%s%s%s\n", + pcmcia_socket[sock].k_state.detect ? "SS_DETECT " : "", + pcmcia_socket[sock].k_state.ready ? "SS_READY " : "", + pcmcia_socket[sock].cs_state.Vcc ? "SS_POWERON " : "", + pcmcia_socket[sock].cs_state.flags & SS_IOCARD ? "SS_IOCARD " : "", + (pcmcia_socket[sock].cs_state.flags & SS_IOCARD && + pcmcia_socket[sock].k_state.bvd1) ? "SS_STSCHG " : "", + ((pcmcia_socket[sock].cs_state.flags & SS_IOCARD) == 0 && + (pcmcia_socket[sock].k_state.bvd1 == 0)) ? "SS_BATDEAD " : "", + ((pcmcia_socket[sock].cs_state.flags & SS_IOCARD) == 0 && + (pcmcia_socket[sock].k_state.bvd2 == 0)) ? "SS_BATWARN " : "", + pcmcia_socket[sock].k_state.vs_3v ? "SS_3VCARD " : "", + pcmcia_socket[sock].k_state.vs_Xv ? "SS_XVCARD " : ""); + + p += sprintf(p, "mask : %s%s%s%s%s\n", + pcmcia_socket[sock].cs_state.csc_mask & SS_DETECT ? "SS_DETECT " : "", + pcmcia_socket[sock].cs_state.csc_mask & SS_READY ? "SS_READY " : "", + pcmcia_socket[sock].cs_state.csc_mask & SS_BATDEAD ? "SS_BATDEAD " : "", + pcmcia_socket[sock].cs_state.csc_mask & SS_BATWARN ? "SS_BATWARN " : "", + pcmcia_socket[sock].cs_state.csc_mask & SS_STSCHG ? "SS_STSCHG " : ""); + + p += sprintf(p, "cs_flags : %s%s%s%s%s\n", + pcmcia_socket[sock].cs_state.flags & SS_PWR_AUTO ? + "SS_PWR_AUTO " : "", + pcmcia_socket[sock].cs_state.flags & SS_IOCARD ? + "SS_IOCARD " : "", + pcmcia_socket[sock].cs_state.flags & SS_RESET ? + "SS_RESET " : "", + pcmcia_socket[sock].cs_state.flags & SS_SPKR_ENA ? + "SS_SPKR_ENA " : "", + pcmcia_socket[sock].cs_state.flags & SS_OUTPUT_ENA ? + "SS_OUTPUT_ENA " : ""); + + p += sprintf(p, "Vcc : %d\n", pcmcia_socket[sock].cs_state.Vcc); + p += sprintf(p, "Vpp : %d\n", pcmcia_socket[sock].cs_state.Vpp); + p += sprintf(p, "irq : %d\n", pcmcia_socket[sock].cs_state.io_irq); + p += sprintf(p, "I/O : %u\n", pcmcia_socket[sock].speed_io); + p += sprintf(p, "attribute: %u\n", pcmcia_socket[sock].speed_attr); + p += sprintf(p, "common : %u\n", pcmcia_socket[sock].speed_mem); + return p-buf; +} + + +#endif /* defined(CONFIG_PROC_FS) */ diff --git a/openwrt/package/linux/kernel-source/drivers/pcmcia/bcm4710_pcmcia.c b/openwrt/package/linux/kernel-source/drivers/pcmcia/bcm4710_pcmcia.c new file mode 100644 index 000000000..6e3da040c --- /dev/null +++ b/openwrt/package/linux/kernel-source/drivers/pcmcia/bcm4710_pcmcia.c @@ -0,0 +1,266 @@ +/* + * BCM4710 specific pcmcia routines. + * + * Copyright 2004, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * + * $Id$ + */ +#include <linux/module.h> +#include <linux/init.h> +#include <linux/config.h> +#include <linux/delay.h> +#include <linux/ioport.h> +#include <linux/kernel.h> +#include <linux/tqueue.h> +#include <linux/timer.h> +#include <linux/mm.h> +#include <linux/proc_fs.h> +#include <linux/version.h> +#include <linux/types.h> +#include <linux/pci.h> + +#include <pcmcia/version.h> +#include <pcmcia/cs_types.h> +#include <pcmcia/cs.h> +#include <pcmcia/ss.h> +#include <pcmcia/bulkmem.h> +#include <pcmcia/cistpl.h> +#include <pcmcia/bus_ops.h> +#include "cs_internal.h" + +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/system.h> + + +#include <typedefs.h> +#include <bcmdevs.h> +#include <bcm4710.h> +#include <sbconfig.h> +#include <sbextif.h> + +#include "bcm4710pcmcia.h" + +/* Use a static var for irq dev_id */ +static int bcm47xx_pcmcia_dev_id; + +/* Do we think we have a card or not? */ +static int bcm47xx_pcmcia_present = 0; + + +static void bcm4710_pcmcia_reset(void) +{ + extifregs_t *eir; + unsigned long s; + uint32 out0, out1, outen; + + + eir = (extifregs_t *) ioremap_nocache(BCM4710_REG_EXTIF, sizeof(extifregs_t)); + + save_and_cli(s); + + /* Use gpio7 to reset the pcmcia slot */ + outen = readl(&eir->gpio[0].outen); + outen |= BCM47XX_PCMCIA_RESET; + out0 = readl(&eir->gpio[0].out); + out0 &= ~(BCM47XX_PCMCIA_RESET); + out1 = out0 | BCM47XX_PCMCIA_RESET; + + writel(out0, &eir->gpio[0].out); + writel(outen, &eir->gpio[0].outen); + mdelay(1); + writel(out1, &eir->gpio[0].out); + mdelay(1); + writel(out0, &eir->gpio[0].out); + + restore_flags(s); +} + + +static int bcm4710_pcmcia_init(struct pcmcia_init *init) +{ + struct pci_dev *pdev; + extifregs_t *eir; + uint32 outen, intp, intm, tmp; + uint16 *attrsp; + int rc = 0, i; + extern unsigned long bcm4710_cpu_cycle; + + + if (!(pdev = pci_find_device(VENDOR_BROADCOM, SB_EXTIF, NULL))) { + printk(KERN_ERR "bcm4710_pcmcia: extif not found\n"); + return -ENODEV; + } + eir = (extifregs_t *) ioremap_nocache(pci_resource_start(pdev, 0), pci_resource_len(pdev, 0)); + + /* Initialize the pcmcia i/f: 16bit no swap */ + writel(CF_EM_PCMCIA | CF_DS | CF_EN, &eir->pcmcia_config); + +#ifdef notYet + + /* Set the timing for memory accesses */ + tmp = (19 / bcm4710_cpu_cycle) << 24; /* W3 = 10nS */ + tmp = tmp | ((29 / bcm4710_cpu_cycle) << 16); /* W2 = 20nS */ + tmp = tmp | ((109 / bcm4710_cpu_cycle) << 8); /* W1 = 100nS */ + tmp = tmp | (129 / bcm4710_cpu_cycle); /* W0 = 120nS */ + writel(tmp, &eir->pcmcia_memwait); /* 0x01020a0c for a 100Mhz clock */ + + /* Set the timing for I/O accesses */ + tmp = (19 / bcm4710_cpu_cycle) << 24; /* W3 = 10nS */ + tmp = tmp | ((29 / bcm4710_cpu_cycle) << 16); /* W2 = 20nS */ + tmp = tmp | ((109 / bcm4710_cpu_cycle) << 8); /* W1 = 100nS */ + tmp = tmp | (129 / bcm4710_cpu_cycle); /* W0 = 120nS */ + writel(tmp, &eir->pcmcia_iowait); /* 0x01020a0c for a 100Mhz clock */ + + /* Set the timing for attribute accesses */ + tmp = (19 / bcm4710_cpu_cycle) << 24; /* W3 = 10nS */ + tmp = tmp | ((29 / bcm4710_cpu_cycle) << 16); /* W2 = 20nS */ + tmp = tmp | ((109 / bcm4710_cpu_cycle) << 8); /* W1 = 100nS */ + tmp = tmp | (129 / bcm4710_cpu_cycle); /* W0 = 120nS */ + writel(tmp, &eir->pcmcia_attrwait); /* 0x01020a0c for a 100Mhz clock */ + +#endif + /* Make sure gpio0 and gpio5 are inputs */ + outen = readl(&eir->gpio[0].outen); + outen &= ~(BCM47XX_PCMCIA_WP | BCM47XX_PCMCIA_STSCHG | BCM47XX_PCMCIA_RESET); + writel(outen, &eir->gpio[0].outen); + + /* Issue a reset to the pcmcia socket */ + bcm4710_pcmcia_reset(); + +#ifdef DO_BCM47XX_PCMCIA_INTERRUPTS + /* Setup gpio5 to be the STSCHG interrupt */ + intp = readl(&eir->gpiointpolarity); + writel(intp | BCM47XX_PCMCIA_STSCHG, &eir->gpiointpolarity); /* Active low */ + intm = readl(&eir->gpiointmask); + writel(intm | BCM47XX_PCMCIA_STSCHG, &eir->gpiointmask); /* Enable it */ +#endif + + DEBUG(2, "bcm4710_pcmcia after reset:\n"); + DEBUG(2, "\textstatus\t= 0x%08x:\n", readl(&eir->extstatus)); + DEBUG(2, "\tpcmcia_config\t= 0x%08x:\n", readl(&eir->pcmcia_config)); + DEBUG(2, "\tpcmcia_memwait\t= 0x%08x:\n", readl(&eir->pcmcia_memwait)); + DEBUG(2, "\tpcmcia_attrwait\t= 0x%08x:\n", readl(&eir->pcmcia_attrwait)); + DEBUG(2, "\tpcmcia_iowait\t= 0x%08x:\n", readl(&eir->pcmcia_iowait)); + DEBUG(2, "\tgpioin\t\t= 0x%08x:\n", readl(&eir->gpioin)); + DEBUG(2, "\tgpio_outen0\t= 0x%08x:\n", readl(&eir->gpio[0].outen)); + DEBUG(2, "\tgpio_out0\t= 0x%08x:\n", readl(&eir->gpio[0].out)); + DEBUG(2, "\tgpiointpolarity\t= 0x%08x:\n", readl(&eir->gpiointpolarity)); + DEBUG(2, "\tgpiointmask\t= 0x%08x:\n", readl(&eir->gpiointmask)); + +#ifdef DO_BCM47XX_PCMCIA_INTERRUPTS + /* Request pcmcia interrupt */ + rc = request_irq(BCM47XX_PCMCIA_IRQ, init->handler, SA_INTERRUPT, + "PCMCIA Interrupt", &bcm47xx_pcmcia_dev_id); +#endif + + attrsp = (uint16 *)ioremap_nocache(EXTIF_PCMCIA_CFGBASE(BCM4710_EXTIF), 0x1000); + tmp = readw(&attrsp[0]); + DEBUG(2, "\tattr[0] = 0x%04x\n", tmp); + if ((tmp == 0x7fff) || (tmp == 0x7f00)) { + bcm47xx_pcmcia_present = 0; + } else { + bcm47xx_pcmcia_present = 1; + } + + /* There's only one socket */ + return 1; +} + +static int bcm4710_pcmcia_shutdown(void) +{ + extifregs_t *eir; + uint32 intm; + + eir = (extifregs_t *) ioremap_nocache(BCM4710_REG_EXTIF, sizeof(extifregs_t)); + + /* Disable the pcmcia i/f */ + writel(0, &eir->pcmcia_config); + + /* Reset gpio's */ + intm = readl(&eir->gpiointmask); + writel(intm & ~BCM47XX_PCMCIA_STSCHG, &eir->gpiointmask); /* Disable it */ + + free_irq(BCM47XX_PCMCIA_IRQ, &bcm47xx_pcmcia_dev_id); + + return 0; +} + +static int +bcm4710_pcmcia_socket_state(unsigned sock, struct pcmcia_state *state) +{ + extifregs_t *eir; + + eir = (extifregs_t *) ioremap_nocache(BCM4710_REG_EXTIF, sizeof(extifregs_t)); + + + if (sock != 0) { + printk(KERN_ERR "bcm4710 socket_state bad sock %d\n", sock); + return -1; + } + + if (bcm47xx_pcmcia_present) { + state->detect = 1; + state->ready = 1; + state->bvd1 = 1; + state->bvd2 = 1; + state->wrprot = (readl(&eir->gpioin) & BCM47XX_PCMCIA_WP) == BCM47XX_PCMCIA_WP; + state->vs_3v = 0; + state->vs_Xv = 0; + } else { + state->detect = 0; + state->ready = 0; + } + + return 1; +} + + +static int bcm4710_pcmcia_get_irq_info(struct pcmcia_irq_info *info) +{ + if (info->sock >= BCM47XX_PCMCIA_MAX_SOCK) return -1; + + info->irq = BCM47XX_PCMCIA_IRQ; + + return 0; +} + + +static int +bcm4710_pcmcia_configure_socket(const struct pcmcia_configure *configure) +{ + if (configure->sock >= BCM47XX_PCMCIA_MAX_SOCK) return -1; + + + DEBUG(2, "Vcc %dV Vpp %dV output %d speaker %d reset %d\n", configure->vcc, + configure->vpp, configure->output, configure->speaker, configure->reset); + + if ((configure->vcc != 50) || (configure->vpp != 50)) { + printk("%s: bad Vcc/Vpp (%d:%d)\n", __FUNCTION__, configure->vcc, + configure->vpp); + } + + if (configure->reset) { + /* Issue a reset to the pcmcia socket */ + DEBUG(1, "%s: Reseting socket\n", __FUNCTION__); + bcm4710_pcmcia_reset(); + } + + + return 0; +} + +struct pcmcia_low_level bcm4710_pcmcia_ops = { + bcm4710_pcmcia_init, + bcm4710_pcmcia_shutdown, + bcm4710_pcmcia_socket_state, + bcm4710_pcmcia_get_irq_info, + bcm4710_pcmcia_configure_socket +}; + diff --git a/openwrt/package/linux/kernel-source/drivers/pcmcia/bcm4710pcmcia.h b/openwrt/package/linux/kernel-source/drivers/pcmcia/bcm4710pcmcia.h new file mode 100644 index 000000000..42a7463bd --- /dev/null +++ b/openwrt/package/linux/kernel-source/drivers/pcmcia/bcm4710pcmcia.h @@ -0,0 +1,118 @@ +/* + * + * bcm47xx pcmcia driver + * + * Copyright 2004, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * + * Based on sa1100.h and include/asm-arm/arch-sa1100/pcmica.h + * from www.handhelds.org, + * and au1000_generic.c from oss.sgi.com. + * + * $Id$ + */ + +#if !defined(_BCM4710PCMCIA_H) +#define _BCM4710PCMCIA_H + +#include <pcmcia/cs_types.h> +#include <pcmcia/ss.h> +#include <pcmcia/bulkmem.h> +#include <pcmcia/cistpl.h> +#include "cs_internal.h" + + +/* The 47xx can only support one socket */ +#define BCM47XX_PCMCIA_MAX_SOCK 1 + +/* In the bcm947xx gpio's are used for some pcmcia functions */ +#define BCM47XX_PCMCIA_WP 0x01 /* Bit 0 is WP input */ +#define BCM47XX_PCMCIA_STSCHG 0x20 /* Bit 5 is STSCHG input/interrupt */ +#define BCM47XX_PCMCIA_RESET 0x80 /* Bit 7 is RESET */ + +#define BCM47XX_PCMCIA_IRQ 2 + +/* The socket driver actually works nicely in interrupt-driven form, + * so the (relatively infrequent) polling is "just to be sure." + */ +#define BCM47XX_PCMCIA_POLL_PERIOD (2 * HZ) + +#define BCM47XX_PCMCIA_IO_SPEED (255) +#define BCM47XX_PCMCIA_MEM_SPEED (300) + + +struct pcmcia_state { + unsigned detect: 1, + ready: 1, + bvd1: 1, + bvd2: 1, + wrprot: 1, + vs_3v: 1, + vs_Xv: 1; +}; + + +struct pcmcia_configure { + unsigned sock: 8, + vcc: 8, + vpp: 8, + output: 1, + speaker: 1, + reset: 1; +}; + +struct pcmcia_irq_info { + unsigned int sock; + unsigned int irq; +}; + +/* This structure encapsulates per-socket state which we might need to + * use when responding to a Card Services query of some kind. + */ +struct bcm47xx_pcmcia_socket { + socket_state_t cs_state; + struct pcmcia_state k_state; + unsigned int irq; + void (*handler)(void *, unsigned int); + void *handler_info; + pccard_io_map io_map[MAX_IO_WIN]; + pccard_mem_map mem_map[MAX_WIN]; + ioaddr_t virt_io, phys_attr, phys_mem; + unsigned short speed_io, speed_attr, speed_mem; +}; + +struct pcmcia_init { + void (*handler)(int irq, void *dev, struct pt_regs *regs); +}; + +struct pcmcia_low_level { + int (*init)(struct pcmcia_init *); + int (*shutdown)(void); + int (*socket_state)(unsigned sock, struct pcmcia_state *); + int (*get_irq_info)(struct pcmcia_irq_info *); + int (*configure_socket)(const struct pcmcia_configure *); +}; + +extern struct pcmcia_low_level bcm47xx_pcmcia_ops; + +/* I/O pins replacing memory pins + * (PCMCIA System Architecture, 2nd ed., by Don Anderson, p.75) + * + * These signals change meaning when going from memory-only to + * memory-or-I/O interface: + */ +#define iostschg bvd1 +#define iospkr bvd2 + + +/* + * Declaration for implementation specific low_level operations. + */ +extern struct pcmcia_low_level bcm4710_pcmcia_ops; + +#endif /* !defined(_BCM4710PCMCIA_H) */ |