add all source code from linksys/broadcom which is free, to cvs for better maintainence inside

openwrt. this gives us the ability to better support different hardware models, without changing
any external tar-balls. only et.o and wl.o is missing and is fetched from my webserver.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@379 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 2164 insertions, 0 deletions

diff --git a/openwrt/package/linux/kernel-source/drivers/net/hnd/sbutils.c b/openwrt/package/linux/kernel-source/drivers/net/hnd/sbutils.c
new file mode 100644
index 000000000..50ec33986
--- /dev/null
+++ b/openwrt/package/linux/kernel-source/drivers/net/hnd/sbutils.c
@@ -0,0 +1,2164 @@
+/*
+ * Misc utility routines for accessing chip-specific features
+ * of the SiliconBackplane-based Broadcom chips.
+ *
+ * Copyright 2004, Broadcom Corporation
+ * All Rights Reserved.
+ * 
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ * $Id$
+ */
+
+#include <typedefs.h>
+#include <osl.h>
+#include <bcmutils.h>
+#include <bcmdevs.h>
+#include <sbconfig.h>
+#include <sbchipc.h>
+#include <sbpci.h>
+#include <pcicfg.h>
+#include <sbpcmcia.h>
+#include <sbextif.h>
+#include <sbutils.h>
+#include <bcmsrom.h>
+
+/* debug/trace */
+#define	SB_ERROR(args)
+
+typedef uint32 (*sb_intrsoff_t)(void *intr_arg);
+typedef void (*sb_intrsrestore_t)(void *intr_arg, uint32 arg);
+typedef bool (*sb_intrsenabled_t)(void *intr_arg);
+
+/* misc sb info needed by some of the routines */
+typedef struct sb_info {
+	uint	chip;			/* chip number */
+	uint	chiprev;		/* chip revision */
+	uint	chippkg;		/* chip package option */
+	uint	boardtype;		/* board type */
+	uint	boardvendor;		/* board vendor id */
+	uint	bus;			/* what bus type we are going through */
+
+	void	*osh;			/* osl os handle */
+	void	*sdh;			/* bcmsdh handle */
+
+	void	*curmap;		/* current regs va */
+	void	*regs[SB_MAXCORES];	/* other regs va */
+
+	uint	curidx;			/* current core index */
+	uint	dev_coreid;		/* the core provides driver functions */
+	uint	pciidx;			/* pci core index */
+	uint	pcirev;			/* pci core rev */
+
+	uint	pcmciaidx;		/* pcmcia core index */
+	uint	pcmciarev;		/* pcmcia core rev */
+	bool	memseg;			/* flag to toggle MEM_SEG register */
+
+	uint	ccrev;			/* chipc core rev */
+
+	uint	gpioidx;		/* gpio control core index */
+	uint	gpioid;			/* gpio control coretype */
+
+	uint	numcores;		/* # discovered cores */
+	uint	coreid[SB_MAXCORES];	/* id of each core */
+
+	void	*intr_arg;		/* interrupt callback function arg */
+	sb_intrsoff_t		intrsoff_fn;		/* function turns chip interrupts off */
+	sb_intrsrestore_t	intrsrestore_fn;	/* function restore chip interrupts */
+	sb_intrsenabled_t	intrsenabled_fn;	/* function to check if chip interrupts are enabled */
+} sb_info_t;
+
+/* local prototypes */
+static void* sb_doattach(sb_info_t *si, uint devid, void *osh, void *regs, uint bustype, void *sdh, char **vars, int *varsz);
+static void sb_scan(sb_info_t *si);
+static uint sb_corereg(void *sbh, uint coreidx, uint regoff, uint mask, uint val);
+static uint _sb_coreidx(void *sbh);
+static uint sb_findcoreidx(void *sbh, uint coreid, uint coreunit);
+static uint sb_pcidev2chip(uint pcidev);
+static uint sb_chip2numcores(uint chip);
+
+#define	SB_INFO(sbh)	(sb_info_t*)sbh
+#define	SET_SBREG(sbh, r, mask, val)	W_SBREG((sbh), (r), ((R_SBREG((sbh), (r)) & ~(mask)) | (val)))
+#define	GOODCOREADDR(x)	(((x) >= SB_ENUM_BASE) && ((x) <= SB_ENUM_LIM) && ISALIGNED((x), SB_CORE_SIZE))
+#define	GOODREGS(regs)	(regs && ISALIGNED(regs, SB_CORE_SIZE))
+#define	REGS2SB(va)	(sbconfig_t*) ((uint)(va) + SBCONFIGOFF)
+#define	GOODIDX(idx)	(((uint)idx) < SB_MAXCORES)
+#define	BADIDX		(SB_MAXCORES+1)
+
+#define	R_SBREG(sbh, sbr)	sb_read_sbreg((sbh), (sbr))
+#define	W_SBREG(sbh, sbr, v)	sb_write_sbreg((sbh), (sbr), (v))
+#define	AND_SBREG(sbh, sbr, v)	W_SBREG((sbh), (sbr), (R_SBREG((sbh), (sbr)) & (v)))
+#define	OR_SBREG(sbh, sbr, v)	W_SBREG((sbh), (sbr), (R_SBREG((sbh), (sbr)) | (v)))
+
+/*
+ * Macros to disable/restore function core(D11, ENET, ILINE20, etc) interrupts before/
+ * after core switching to avoid invalid register accesss inside ISR.
+ */
+#define INTR_OFF(si, intr_val) \
+	if ((si)->intrsoff_fn && (si)->coreid[(si)->curidx] == (si)->dev_coreid) {	\
+		intr_val = (*(si)->intrsoff_fn)((si)->intr_arg); }
+#define INTR_RESTORE(si, intr_val) \
+	if ((si)->intrsrestore_fn && (si)->coreid[(si)->curidx] == (si)->dev_coreid) {	\
+		(*(si)->intrsrestore_fn)((si)->intr_arg, intr_val); }
+
+/* power control defines */
+#define	LPOMINFREQ	25000			/* low power oscillator min */
+#define	LPOMAXFREQ	43000			/* low power oscillator max */
+#define	XTALMINFREQ	19800000		/* 20mhz - 1% */
+#define	XTALMAXFREQ	20200000		/* 20mhz + 1% */
+#define	PCIMINFREQ	25000000		/* 25mhz */
+#define	PCIMAXFREQ	34000000		/* 33mhz + fudge */
+#define SCC_DEF_DIV	0			/* default slow clock divider */
+
+#define XTAL_ON_DELAY		1000	/* Xtal power on delay in us */
+
+#define SCC_LOW2FAST_LIMIT	5000	/* turn on fast clock time, in unit of ms */
+
+
+static uint32
+sb_read_sbreg(void *sbh, volatile uint32 *sbr)
+{
+	sb_info_t *si;
+	uint8 tmp;
+	uint32 val, intr_val = 0;
+
+	si = SB_INFO(sbh);
+
+	/*
+	 * compact flash only has 11 bits address, while we needs 12 bits address.
+	 * MEM_SEG will be OR'd with other 11 bits address in hardware,
+	 * so we program MEM_SEG with 12th bit when necessary(access sb regsiters).
+	 * For normal PCMCIA bus(CFTable_regwinsz > 2k), do nothing special
+	 */
+	if(si->memseg) {
+		INTR_OFF(si, intr_val);
+		tmp = 1;
+		OSL_PCMCIA_WRITE_ATTR(si->osh, MEM_SEG, &tmp, 1);
+		(uint32)sbr &= ~(1 << 11);	/* mask out bit 11*/
+	}
+
+	val = R_REG(sbr);
+
+	if(si->memseg) {
+		tmp = 0;
+		OSL_PCMCIA_WRITE_ATTR(si->osh, MEM_SEG, &tmp, 1);
+		INTR_RESTORE(si, intr_val);
+	}
+
+	return (val);
+}
+
+static void
+sb_write_sbreg(void *sbh, volatile uint32 *sbr, uint32 v)
+{
+	sb_info_t *si;
+	uint8 tmp;
+	volatile uint32 dummy;
+	uint32 intr_val = 0;
+
+	si = SB_INFO(sbh);
+
+	/*
+	 * compact flash only has 11 bits address, while we needs 12 bits address.
+	 * MEM_SEG will be OR'd with other 11 bits address in hardware,
+	 * so we program MEM_SEG with 12th bit when necessary(access sb regsiters).
+	 * For normal PCMCIA bus(CFTable_regwinsz > 2k), do nothing special
+	 */
+	if(si->memseg) {
+		INTR_OFF(si, intr_val);
+		tmp = 1;
+		OSL_PCMCIA_WRITE_ATTR(si->osh, MEM_SEG, &tmp, 1);
+		(uint32)sbr &= ~(1 << 11);	/* mask out bit 11 */
+	}
+
+	if (si->bus == PCMCIA_BUS) {
+#ifdef IL_BIGENDIAN
+		dummy = R_REG(sbr);
+		W_REG((volatile uint16 *)((uint32)sbr + 2), (uint16)((v >> 16) & 0xffff));
+		dummy = R_REG(sbr);
+		W_REG((volatile uint16 *)sbr, (uint16)(v & 0xffff));
+#else
+		dummy = R_REG(sbr);
+		W_REG((volatile uint16 *)sbr, (uint16)(v & 0xffff));
+		dummy = R_REG(sbr);
+		W_REG((volatile uint16 *)((uint32)sbr + 2), (uint16)((v >> 16) & 0xffff));
+#endif
+	} else
+		W_REG(sbr, v);
+
+	if(si->memseg) {
+		tmp = 0;
+		OSL_PCMCIA_WRITE_ATTR(si->osh, MEM_SEG, &tmp, 1);
+		INTR_RESTORE(si, intr_val);
+	}
+}
+
+/*
+ * Allocate a sb handle.
+ * devid - pci device id (used to determine chip#)
+ * osh - opaque OS handle
+ * regs - virtual address of initial core registers
+ * bustype - pci/pcmcia/sb/sdio/etc
+ * vars - pointer to a pointer area for "environment" variables
+ * varsz - pointer to int to return the size of the vars
+ */
+void*
+sb_attach(uint devid, void *osh, void *regs, uint bustype, void *sdh, char **vars, int *varsz)
+{
+	sb_info_t *si;
+
+	/* alloc sb_info_t */
+	if ((si = MALLOC(sizeof (sb_info_t))) == NULL) {
+		SB_ERROR(("sb_attach: malloc failed!\n"));
+		return (NULL);
+	}
+
+	return (sb_doattach(si, devid, osh, regs, bustype, sdh, vars, varsz));
+}
+
+/* global kernel resource */
+static sb_info_t ksi;
+
+/* generic kernel variant of sb_attach() */
+void*
+sb_kattach()
+{
+	uint32 *regs;
+	char *unused;
+	int varsz;
+
+	if (ksi.curmap == NULL) {
+		uint32 cid;
+
+		regs = (uint32 *)REG_MAP(SB_ENUM_BASE, SB_CORE_SIZE);
+		cid = R_REG((uint32 *)regs);
+		if (((cid & CID_ID_MASK) == 0x4712) &&
+		    ((cid & CID_REV_MASK) <= 0x00020000)) {
+			uint32 *scc, val;
+
+			scc = (uint32 *)((uint32)regs + OFFSETOF(chipcregs_t, slow_clk_ctl));
+			val = R_REG(scc);
+			SB_ERROR(("    initial scc = 0x%x\n", val));
+			val |= SCC_SS_XTAL;
+			W_REG(scc, val);
+		}
+
+		sb_doattach(&ksi, BCM4710_DEVICE_ID, NULL, (void*)regs,
+			SB_BUS, NULL, &unused, &varsz);
+	}
+
+	return &ksi;
+}
+
+static void*
+sb_doattach(sb_info_t *si, uint devid, void *osh, void *regs, uint bustype, void *sdh, char **vars, int *varsz)
+{
+	uint origidx;
+	chipcregs_t *cc;
+	uint32 w;
+
+	ASSERT(GOODREGS(regs));
+
+	bzero((uchar*)si, sizeof (sb_info_t));
+
+	si->pciidx = si->gpioidx = BADIDX;
+
+	si->osh = osh;
+	si->curmap = regs;
+	si->sdh = sdh;
+
+	/* check to see if we are a sb core mimic'ing a pci core */
+	if (bustype == PCI_BUS) {
+		if (OSL_PCI_READ_CONFIG(osh, PCI_SPROM_CONTROL, sizeof (uint32)) == 0xffffffff)
+			bustype = SB_BUS;
+		else
+			bustype = PCI_BUS;
+	}
+
+	si->bus = bustype;
+
+	if (si->bus == PCMCIA_BUS)
+		/* need to set memseg flag for CF card first before any sb registers access, 
+		 * such as the access inside sb_scan.  the card type is detected and memseg
+		 * flag is reassigned later after srom_var_init.  there should be no effect
+		 * for PCMCIA cards even though the memseg flag is set
+		 */
+		si->memseg = TRUE;
+
+	/* kludge to enable the clock on the 4306 which lacks a slowclock */
+	if (si->bus == PCI_BUS)
+		sb_pwrctl_xtal((void*)si, XTAL|PLL, ON);
+
+	/* initialize current core index value */
+	si->curidx = _sb_coreidx((void*)si);
+	if (si->curidx == BADIDX)
+		goto bad;
+
+	/* keep and reuse the initial register mapping */
+	origidx = si->curidx;
+	if (si->bus == SB_BUS)
+		si->regs[origidx] = regs;
+
+	/* is core-0 a chipcommon core? */
+	si->numcores = 1;
+	cc = (chipcregs_t*) sb_setcoreidx((void*)si, 0);
+	if (sb_coreid((void*)si) != SB_CC)
+		cc = NULL;
+
+	/* determine chip id and rev */
+	if (cc) {
+		/* chip common core found! */
+		si->chip = R_REG(&cc->chipid) & CID_ID_MASK;
+		si->chiprev = (R_REG(&cc->chipid) & CID_REV_MASK) >> CID_REV_SHIFT;
+		si->chippkg = (R_REG(&cc->chipid) & CID_PKG_MASK) >> CID_PKG_SHIFT;
+	} else {
+		/* The only pcmcia chip without a chipcommon core is a 4301 */
+		if (si->bus == PCMCIA_BUS)
+			devid = BCM4301_DEVICE_ID;
+
+		/* no chip common core -- must convert device id to chip id */
+		if ((si->chip = sb_pcidev2chip(devid)) == 0) {
+			SB_ERROR(("sb_attach: unrecognized device id 0x%04x\n", devid));
+			goto bad;
+		}
+	}
+
+	/* get chipcommon rev */
+	si->ccrev = cc? sb_corerev((void*)si) : 0;
+
+	/* determine numcores */
+	if ((si->ccrev == 4) || (si->ccrev >= 6))
+		si->numcores = (R_REG(&cc->chipid) & CID_CC_MASK) >> CID_CC_SHIFT;
+	else
+		si->numcores = sb_chip2numcores(si->chip);
+
+	/* return to original core */
+	sb_setcoreidx((void*)si, origidx);
+
+	/* sanity checks */
+	ASSERT(si->chip);
+
+	/* scan for cores */
+	sb_scan(si);
+
+	/* initialize the vars after sb_scan so that the core rev. information
+	 * collected by sb_scan is available for the srom_var_init.
+	 */
+	if (srom_var_init(si, si->bus, si->curmap, osh, vars, varsz)) {
+		SB_ERROR(("sb_attach: srom_var_init failed\n"));
+		goto bad;
+	}
+	
+	if (cc == NULL) {
+		/*
+		 * The chip revision number is hardwired into all
+		 * of the pci function config rev fields and is
+		 * independent from the individual core revision numbers.
+		 * For example, the "A0" silicon of each chip is chip rev 0.
+		 * For PCMCIA we get it from the CIS instead.
+		 */
+		if (si->bus == PCMCIA_BUS) {
+			ASSERT(vars);
+			si->chiprev = getintvar(*vars, "chiprev");
+		} else if (si->bus == PCI_BUS) {
+			w = OSL_PCI_READ_CONFIG(osh, PCI_CFG_REV, sizeof (uint32));
+			si->chiprev = w & 0xff;
+		} else
+			si->chiprev = 0;
+	}
+
+	if (si->bus == PCMCIA_BUS) {
+		w = getintvar(*vars, "regwindowsz");
+		si->memseg = (w <= CFTABLE_REGWIN_2K) ? TRUE : FALSE;
+	}
+
+	/* pci core is required */
+	if (!GOODIDX(si->pciidx)) {
+		SB_ERROR(("sb_attach: pci core not found\n"));
+		goto bad;
+	}
+
+	/* gpio control core is required */
+	if (!GOODIDX(si->gpioidx)) {
+		SB_ERROR(("sb_attach: gpio control core not found\n"));
+		goto bad;
+	}
+
+	/* get boardtype and boardrev */
+	switch (si->bus) {
+	case PCI_BUS:
+		/* do a pci config read to get subsystem id and subvendor id */
+		w = OSL_PCI_READ_CONFIG(osh, PCI_CFG_SVID, sizeof (uint32));
+		si->boardvendor = w & 0xffff;
+		si->boardtype = (w >> 16) & 0xffff;
+		break;
+
+	case PCMCIA_BUS:
+	case SDIO_BUS:
+		si->boardvendor = getintvar(*vars, "manfid");
+		si->boardtype = getintvar(*vars, "prodid");
+		break;
+
+	case SB_BUS:
+		si->boardvendor = VENDOR_BROADCOM;
+		si->boardtype = 0xffff;
+		break;
+	}
+
+	if (si->boardtype == 0) {
+		SB_ERROR(("sb_attach: unknown board type\n"));
+		ASSERT(si->boardtype);
+	}
+
+	/* clear any previous epidiag-induced target abort */
+	sb_taclear((void*)si);
+
+	return ((void*)si);
+
+bad:
+	MFREE(si, sizeof (sb_info_t));
+	return (NULL);
+}
+
+uint
+sb_coreid(void *sbh)
+{
+	sb_info_t *si;
+	sbconfig_t *sb;
+
+	si = SB_INFO(sbh);
+	sb = REGS2SB(si->curmap);
+
+	return ((R_SBREG(sbh, &(sb)->sbidhigh) & SBIDH_CC_MASK) >> SBIDH_CC_SHIFT);
+}
+
+uint
+sb_coreidx(void *sbh)
+{
+	sb_info_t *si;
+
+	si = SB_INFO(sbh);
+	return (si->curidx);
+}
+
+/* return current index of core */
+static uint
+_sb_coreidx(void *sbh)
+{
+	sb_info_t *si;
+	sbconfig_t *sb;
+	uint32 sbaddr = 0;
+
+	si = SB_INFO(sbh);
+	ASSERT(si);
+
+	switch (si->bus) {
+	case SB_BUS:
+		sb = REGS2SB(si->curmap);
+		sbaddr = sb_base(R_SBREG(sbh, &sb->sbadmatch0));
+		break;
+
+	case PCI_BUS:
+		sbaddr = OSL_PCI_READ_CONFIG(si->osh, PCI_BAR0_WIN, sizeof (uint32));
+		break;
+
+	case PCMCIA_BUS: {
+		uint8 tmp;
+
+		OSL_PCMCIA_READ_ATTR(si->osh, PCMCIA_ADDR0, &tmp, 1);
+		sbaddr  = (uint)tmp << 12;
+		OSL_PCMCIA_READ_ATTR(si->osh, PCMCIA_ADDR1, &tmp, 1);
+		sbaddr |= (uint)tmp << 16;
+		OSL_PCMCIA_READ_ATTR(si->osh, PCMCIA_ADDR2, &tmp, 1);
+		sbaddr |= (uint)tmp << 24;
+		break;
+	}
+	default:
+		ASSERT(0);
+	}
+
+	if (!GOODCOREADDR(sbaddr))
+		return BADIDX;
+
+	return ((sbaddr - SB_ENUM_BASE) / SB_CORE_SIZE);
+}
+
+uint
+sb_corevendor(void *sbh)
+{
+	sb_info_t *si;
+	sbconfig_t *sb;
+
+	si = SB_INFO(sbh);
+	sb = REGS2SB(si->curmap);
+
+	return ((R_SBREG(sbh, &(sb)->sbidhigh) & SBIDH_VC_MASK) >> SBIDH_VC_SHIFT);
+}
+
+uint
+sb_corerev(void *sbh)
+{
+	sb_info_t *si;
+	sbconfig_t *sb;
+
+	si = SB_INFO(sbh);
+	sb = REGS2SB(si->curmap);
+
+	return (R_SBREG(sbh, &(sb)->sbidhigh) & SBIDH_RC_MASK);
+}
+
+#define	SBTML_ALLOW	(SBTML_PE | SBTML_FGC | SBTML_FL_MASK)
+
+/* set/clear sbtmstatelow core-specific flags */
+uint32
+sb_coreflags(void *sbh, uint32 mask, uint32 val)
+{
+	sb_info_t *si;
+	sbconfig_t *sb;
+	uint32 w;
+
+	si = SB_INFO(sbh);
+	sb = REGS2SB(si->curmap);
+
+	ASSERT((val & ~mask) == 0);
+	ASSERT((mask & ~SBTML_ALLOW) == 0);
+
+	/* mask and set */
+	if (mask || val) {
+		w = (R_SBREG(sbh, &sb->sbtmstatelow) & ~mask) | val;
+		W_SBREG(sbh, &sb->sbtmstatelow, w);
+	}
+
+	/* return the new value */
+	return (R_SBREG(sbh, &sb->sbtmstatelow) & SBTML_ALLOW);
+}
+
+/* set/clear sbtmstatehigh core-specific flags */
+uint32
+sb_coreflagshi(void *sbh, uint32 mask, uint32 val)
+{
+	sb_info_t *si;
+	sbconfig_t *sb;
+	uint32 w;
+
+	si = SB_INFO(sbh);
+	sb = REGS2SB(si->curmap);
+
+	ASSERT((val & ~mask) == 0);
+	ASSERT((mask & ~SBTMH_FL_MASK) == 0);
+
+	/* mask and set */
+	if (mask || val) {
+		w = (R_SBREG(sbh, &sb->sbtmstatehigh) & ~mask) | val;
+		W_SBREG(sbh, &sb->sbtmstatehigh, w);
+	}
+
+	/* return the new value */
+	return (R_SBREG(sbh, &sb->sbtmstatehigh) & SBTMH_FL_MASK);
+}
+
+bool
+sb_iscoreup(void *sbh)
+{
+	sb_info_t *si;
+	sbconfig_t *sb;
+
+	si = SB_INFO(sbh);
+	sb = REGS2SB(si->curmap);
+
+	return ((R_SBREG(sbh, &(sb)->sbtmstatelow) & (SBTML_RESET | SBTML_REJ | SBTML_CLK)) == SBTML_CLK);
+}
+
+/*
+ * Switch to 'coreidx', issue a single arbitrary 32bit register mask&set operation,
+ * switch back to the original core, and return the new value.
+ */
+static uint
+sb_corereg(void *sbh, uint coreidx, uint regoff, uint mask, uint val)
+{
+	sb_info_t *si;
+	uint origidx;
+	uint32 *r;
+	uint w;
+	uint intr_val = 0;
+
+	ASSERT(GOODIDX(coreidx));
+	ASSERT(regoff < SB_CORE_SIZE);
+	ASSERT((val & ~mask) == 0);
+
+	si = SB_INFO(sbh);
+
+	INTR_OFF(si, intr_val);
+
+	/* save current core index */
+	origidx = sb_coreidx(sbh);
+
+	/* switch core */
+	r = (uint32*) ((uint) sb_setcoreidx(sbh, coreidx) + regoff);
+
+	/* mask and set */
+	if (mask || val) {
+		if (regoff >= SBCONFIGOFF) {
+			w = (R_SBREG(sbh, r) & ~mask) | val;
+			W_SBREG(sbh, r, w);
+		} else {
+			w = (R_REG(r) & ~mask) | val;
+			W_REG(r, w);
+		}
+	}
+
+	/* readback */
+	if (regoff >= SBCONFIGOFF)
+		w = R_SBREG(sbh, r);
+	else
+		w = R_REG(r);
+
+	/* restore core index */
+	if (origidx != coreidx)
+		sb_setcoreidx(sbh, origidx);
+
+	INTR_RESTORE(si, intr_val);
+	return (w);
+}
+
+/* scan the sb enumerated space to identify all cores */
+static void
+sb_scan(sb_info_t *si)
+{
+	void *sbh;
+	uint origidx;
+	uint i;
+
+	sbh = (void*) si;
+
+	/* numcores should already be set */
+	ASSERT((si->numcores > 0) && (si->numcores <= SB_MAXCORES));
+
+	/* save current core index */
+	origidx = sb_coreidx(sbh);
+
+	si->pciidx = si->gpioidx = BADIDX;
+
+	for (i = 0; i < si->numcores; i++) {
+		sb_setcoreidx(sbh, i);
+		si->coreid[i] = sb_coreid(sbh);
+
+		if (si->coreid[i] == SB_PCI) {
+			si->pciidx = i;
+			si->pcirev = sb_corerev(sbh);
+
+		} else if (si->coreid[i] == SB_PCMCIA) {
+			si->pcmciaidx = i;
+			si->pcmciarev = sb_corerev(sbh);
+		}
+	}
+
+	/*
+	 * Find the gpio "controlling core" type and index.
+	 * Precedence:
+	 * - if there's a chip common core - use that
+	 * - else if there's a pci core (rev >= 2) - use that
+	 * - else there had better be an extif core (4710 only)
+	 */
+	if (GOODIDX(sb_findcoreidx(sbh, SB_CC, 0))) {
+		si->gpioidx = sb_findcoreidx(sbh, SB_CC, 0);
+		si->gpioid = SB_CC;
+	} else if (GOODIDX(si->pciidx) && (si->pcirev >= 2)) {
+		si->gpioidx = si->pciidx;
+		si->gpioid = SB_PCI;
+	} else if (sb_findcoreidx(sbh, SB_EXTIF, 0)) {
+		si->gpioidx = sb_findcoreidx(sbh, SB_EXTIF, 0);
+		si->gpioid = SB_EXTIF;
+	}
+
+	/* return to original core index */
+	sb_setcoreidx(sbh, origidx);
+}
+
+/* may be called with core in reset */
+void
+sb_detach(void *sbh)
+{
+	sb_info_t *si;
+	uint idx;
+
+	si = SB_INFO(sbh);
+
+	if (si == NULL)
+		return;
+
+	if (si->bus == SB_BUS)
+		for (idx = 0; idx < SB_MAXCORES; idx++)
+			if (si->regs[idx]) {
+				REG_UNMAP(si->regs[idx]);
+				si->regs[idx] = NULL;
+			}
+
+	MFREE(si, sizeof (sb_info_t));
+}
+
+/* use pci dev id to determine chip id for chips not having a chipcommon core */
+static uint
+sb_pcidev2chip(uint pcidev)
+{
+	if ((pcidev >= BCM4710_DEVICE_ID) && (pcidev <= BCM47XX_USB_ID))
+		return (BCM4710_DEVICE_ID);
+	if ((pcidev >= BCM4610_DEVICE_ID) && (pcidev <= BCM4610_USB_ID))
+		return (BCM4610_DEVICE_ID);
+	if ((pcidev >= BCM4402_DEVICE_ID) && (pcidev <= BCM4402_V90_ID))
+		return (BCM4402_DEVICE_ID);
+	if ((pcidev >= BCM4307_V90_ID) && (pcidev <= BCM4307_D11B_ID))
+		return (BCM4307_DEVICE_ID);
+	if (pcidev == BCM4301_DEVICE_ID)
+		return (BCM4301_DEVICE_ID);
+
+	return (0);
+}
+
+/* convert chip number to number of i/o cores */
+static uint
+sb_chip2numcores(uint chip)
+{
+	if (chip == 0x4710)
+		return (9);
+	if (chip == 0x4610)
+		return (9);
+	if (chip == 0x4402)
+		return (3);
+	if ((chip == 0x4307) || (chip == 0x4301))
+		return (5);
+	if (chip == 0x4310)
+		return (8);
+	if (chip == 0x4306)	/* < 4306c0 */
+		return (6);
+	if (chip == 0x4704)
+		return (9);
+	if (chip == 0x5365)
+		return (7);
+
+	SB_ERROR(("sb_chip2numcores: unsupported chip 0x%x\n", chip));
+	ASSERT(0);
+	return (1);
+}
+
+/* return index of coreid or BADIDX if not found */
+static uint
+sb_findcoreidx(void *sbh, uint coreid, uint coreunit)
+{
+	sb_info_t *si;
+	uint found;
+	uint i;
+
+	si = SB_INFO(sbh);
+	found = 0;
+
+	for (i = 0; i < si->numcores; i++)
+		if (si->coreid[i] == coreid) {
+			if (found == coreunit)
+				return (i);
+			found++;
+		}
+
+	return (BADIDX);
+}
+
+/* 
+ * this function changes logical "focus" to the indiciated core, 
+ * must be called with interrupt off.
+ * Moreover, callers should keep interrupts off during switching out of and back to d11 core
+ */
+void*
+sb_setcoreidx(void *sbh, uint coreidx)
+{
+	sb_info_t *si;
+	uint32 sbaddr;
+	uint8 tmp;
+
+	si = SB_INFO(sbh);
+
+	if (coreidx >= si->numcores)
+		return (NULL);
+	
+	/*
+	 * If the user has provided an interrupt mask enabled function,
+	 * then assert interrupts are disabled before switching the core.
+	 */
+	ASSERT((si->intrsenabled_fn == NULL) || !(*(si)->intrsenabled_fn)((si)->intr_arg));
+
+	sbaddr = SB_ENUM_BASE + (coreidx * SB_CORE_SIZE);
+
+	switch (si->bus) {
+	case SB_BUS:
+		/* map new one */
+		if (!si->regs[coreidx]) {
+			si->regs[coreidx] = (void*)REG_MAP(sbaddr, SB_CORE_SIZE);
+			ASSERT(GOODREGS(si->regs[coreidx]));
+		}
+		si->curmap = si->regs[coreidx];
+		break;
+
+	case PCI_BUS:
+		/* point bar0 window */
+		OSL_PCI_WRITE_CONFIG(si->osh, PCI_BAR0_WIN, 4, sbaddr);
+		break;
+
+	case PCMCIA_BUS:
+		tmp = (sbaddr >> 12) & 0x0f;
+		OSL_PCMCIA_WRITE_ATTR(si->osh, PCMCIA_ADDR0, &tmp, 1);
+		tmp = (sbaddr >> 16) & 0xff;
+		OSL_PCMCIA_WRITE_ATTR(si->osh, PCMCIA_ADDR1, &tmp, 1);
+		tmp = (sbaddr >> 24) & 0xff;
+		OSL_PCMCIA_WRITE_ATTR(si->osh, PCMCIA_ADDR2, &tmp, 1);
+		break;
+	}
+
+	si->curidx = coreidx;
+
+	return (si->curmap);
+}
+
+/* 
+ * this function changes logical "focus" to the indiciated core, 
+ * must be called with interrupt off.
+ * Moreover, callers should keep interrupts off during switching out of and back to d11 core
+ */
+void*
+sb_setcore(void *sbh, uint coreid, uint coreunit)
+{
+	sb_info_t *si;
+	uint idx;
+
+	si = SB_INFO(sbh);
+
+	idx = sb_findcoreidx(sbh, coreid, coreunit);
+	if (!GOODIDX(idx))
+		return (NULL);
+
+	return (sb_setcoreidx(sbh, idx));
+}
+
+/* return chip number */
+uint
+sb_chip(void *sbh)
+{
+	sb_info_t *si;
+
+	si = SB_INFO(sbh);
+	return (si->chip);
+}
+
+/* return chip revision number */
+uint
+sb_chiprev(void *sbh)
+{
+	sb_info_t *si;
+
+	si = SB_INFO(sbh);
+	return (si->chiprev);
+}
+
+/* return chip common revision number */
+uint
+sb_chipcrev(void *sbh)
+{
+	sb_info_t *si;
+
+	si = SB_INFO(sbh);
+	return (si->ccrev);
+}
+
+/* return chip package option */
+uint
+sb_chippkg(void *sbh)
+{
+	sb_info_t *si;
+
+	si = SB_INFO(sbh);
+	return (si->chippkg);
+}
+
+/* return PCI core rev. */
+uint
+sb_pcirev(void *sbh)
+{
+	sb_info_t *si;
+
+	si = SB_INFO(sbh);
+	return (si->pcirev);
+}
+
+/* return PCMCIA core rev. */
+uint
+sb_pcmciarev(void *sbh)
+{
+	sb_info_t *si;
+
+	si = SB_INFO(sbh);
+	return (si->pcmciarev);
+}
+
+/* return board vendor id */
+uint
+sb_boardvendor(void *sbh)
+{
+	sb_info_t *si;
+
+	si = SB_INFO(sbh);
+	return (si->boardvendor);
+}
+
+/* return boardtype */
+uint
+sb_boardtype(void *sbh)
+{
+	sb_info_t *si;
+	char *var;
+
+	si = SB_INFO(sbh);
+
+	if (si->bus == SB_BUS && si->boardtype == 0xffff) {
+		/* boardtype format is a hex string */
+		si->boardtype = getintvar(NULL, "boardtype");
+
+		/* backward compatibility for older boardtype string format */
+		if ((si->boardtype == 0) && (var = getvar(NULL, "boardtype"))) {
+			if (!strcmp(var, "bcm94710dev"))
+				si->boardtype = BCM94710D_BOARD;
+			else if (!strcmp(var, "bcm94710ap"))
+				si->boardtype = BCM94710AP_BOARD;
+			else if (!strcmp(var, "bcm94310u"))
+				si->boardtype = BCM94310U_BOARD;
+			else if (!strcmp(var, "bu4711"))
+				si->boardtype = BU4711_BOARD;
+			else if (!strcmp(var, "bu4710"))
+				si->boardtype = BU4710_BOARD;
+			else if (!strcmp(var, "bcm94702mn"))
+				si->boardtype = BCM94702MN_BOARD;
+			else if (!strcmp(var, "bcm94710r1"))
+				si->boardtype = BCM94710R1_BOARD;
+			else if (!strcmp(var, "bcm94710r4"))
+				si->boardtype = BCM94710R4_BOARD;
+			else if (!strcmp(var, "bcm94702cpci"))
+				si->boardtype = BCM94702CPCI_BOARD;
+			else if (!strcmp(var, "bcm95380_rr"))
+				si->boardtype = BCM95380RR_BOARD;
+		}
+	}
+
+	return (si->boardtype);
+}
+
+/* return board bus style */
+uint
+sb_boardstyle(void *sbh)
+{
+	sb_info_t *si;
+	uint16 w;
+
+	si = SB_INFO(sbh);
+
+	if (si->bus == PCMCIA_BUS)
+		return (BOARDSTYLE_PCMCIA);
+
+	if (si->bus == SB_BUS)
+		return (BOARDSTYLE_SOC);
+
+	/* bus is PCI */
+
+	if (OSL_PCI_READ_CONFIG(si->osh, PCI_CFG_CIS, sizeof (uint32)) != 0)
+		return (BOARDSTYLE_CARDBUS);
+
+	if ((srom_read(si->bus, si->curmap, si->osh, (SPROM_SIZE - 1) * 2, 2, &w) == 0) &&
+		(w == 0x0313))
+		return (BOARDSTYLE_CARDBUS);
+
+	return (BOARDSTYLE_PCI);
+}
+
+/* return boolean if sbh device is in pci hostmode or client mode */
+uint
+sb_bus(void *sbh)
+{
+	sb_info_t *si;
+
+	si = SB_INFO(sbh);
+	return (si->bus);
+}
+
+/* return list of found cores */
+uint
+sb_corelist(void *sbh, uint coreid[])
+{
+	sb_info_t *si;
+
+	si = SB_INFO(sbh);
+
+	bcopy((uchar*)si->coreid, (uchar*)coreid, (si->numcores * sizeof (uint)));
+	return (si->numcores);
+}
+
+/* return current register mapping */
+void *
+sb_coreregs(void *sbh)
+{
+	sb_info_t *si;
+
+	si = SB_INFO(sbh);
+	ASSERT(GOODREGS(si->curmap));
+
+	return (si->curmap);
+}
+
+/* traverse all cores to find and clear source of serror */
+static void
+sb_serr_clear(void *sbh)
+{
+	sb_info_t *si;
+	sbconfig_t *sb;
+	uint origidx;
+	uint i, intr_val = 0;
+	void * corereg = NULL;
+
+	si = SB_INFO(sbh);
+
+	INTR_OFF(si, intr_val);
+	origidx = sb_coreidx(sbh);
+
+	for (i = 0; i < si->numcores; i++) {
+		corereg = sb_setcoreidx(sbh, i);
+		if (NULL != corereg) {
+			sb = REGS2SB(corereg);
+			if ((si->chip == BCM4317_DEVICE_ID) && (si->chiprev == 0)) {
+				W_SBREG(sbh, &sb->sbtmstatehigh, 0);
+			} else {
+				if ((R_SBREG(sbh, &sb->sbtmstatehigh)) & SBTMH_SERR) {
+					AND_SBREG(sbh, &sb->sbtmstatehigh, ~SBTMH_SERR);
+					SB_ERROR(("sb_serr_clear: SError at core 0x%x\n", sb_coreid(sbh)));
+				}
+			}
+		}
+	}
+
+	sb_setcoreidx(sbh, origidx);
+	INTR_RESTORE(si, intr_val);
+}
+
+/* check if any inband, outband or timeout errors has happened and clear them */
+/* !! must be called with chip clk on */
+bool
+sb_taclear(void *sbh)
+{
+	sb_info_t *si;
+	sbconfig_t *sb;
+	uint origidx;
+	uint intr_val = 0;
+	bool rc = FALSE;
+	uint32 inband = 0, serror = 0, timeout = 0;
+	void *corereg = NULL;
+	volatile uint32 imstate, tmstate;
+
+	si = SB_INFO(sbh);	
+
+	if (si->bus == PCI_BUS) {
+		volatile uint32 stcmd;
+
+		/* inband error is Target abort for PCI */
+		stcmd = OSL_PCI_READ_CONFIG(si->osh, PCI_CFG_CMD, sizeof(uint32));
+		inband = stcmd & PCI_CFG_CMD_STAT_TA;
+		if (inband)
+			OSL_PCI_WRITE_CONFIG(si->osh, PCI_CFG_CMD, sizeof(uint32), stcmd);
+
+		/* serror */
+		stcmd = OSL_PCI_READ_CONFIG(si->osh, PCI_INT_STATUS, sizeof(uint32));
+		serror = stcmd & PCI_SBIM_STATUS_SERR;
+		if (serror) {
+			sb_serr_clear(sbh);
+			OSL_PCI_WRITE_CONFIG(si->osh, PCI_INT_STATUS, sizeof(uint32), stcmd);
+		}
+
+		/* timeout */
+		imstate = sb_corereg(sbh, si->pciidx, SBCONFIGOFF + OFFSETOF(sbconfig_t, sbimstate), 0, 0);
+		if ((imstate != 0xffffffff) && (imstate & (SBIM_IBE | SBIM_TO))) {
+			sb_corereg(sbh, si->pciidx, SBCONFIGOFF + OFFSETOF(sbconfig_t, sbimstate), ~0, 
+				   (imstate & ~(SBIM_IBE | SBIM_TO)));
+			/* inband = imstate & SBIM_IBE; same as TA above */
+			timeout = imstate & SBIM_TO;
+		}
+
+	} else if (si->bus == PCMCIA_BUS) {
+
+		INTR_OFF(si, intr_val);
+		origidx = sb_coreidx(sbh);
+
+		corereg = sb_setcore(sbh, SB_PCMCIA, 0);
+		if (NULL != corereg) {
+			sb = REGS2SB(corereg);
+
+			imstate = R_SBREG(sbh, &sb->sbimstate);
+			/* handle surprise removal */
+			if ((imstate != 0xffffffff) && (imstate & (SBIM_IBE | SBIM_TO))) {
+				AND_SBREG(sbh, &sb->sbimstate, ~(SBIM_IBE | SBIM_TO));
+				inband = imstate & SBIM_IBE;
+				timeout = imstate & SBIM_TO;
+			}
+			tmstate = R_SBREG(sbh, &sb->sbtmstatehigh);
+			if ((tmstate != 0xffffffff) && (tmstate & SBTMH_INT_STATUS)) {
+				if (!inband) {
+					serror = 1;
+					sb_serr_clear(sbh);
+				}
+				OR_SBREG(sbh, &sb->sbtmstatelow, SBTML_INT_ACK);
+				AND_SBREG(sbh, &sb->sbtmstatelow, ~SBTML_INT_ACK);
+			}
+		}
+		sb_setcoreidx(sbh, origidx);
+		INTR_RESTORE(si, intr_val);
+
+	} else if (si->bus == SDIO_BUS) {
+
+		INTR_OFF(si, intr_val);
+		origidx = sb_coreidx(sbh);
+
+		corereg = sb_setcore(sbh, SB_PCMCIA, 0);
+		if (NULL != corereg) {
+			sb = REGS2SB(corereg);
+
+			imstate = R_SBREG(sbh, &sb->sbimstate);
+			if ((imstate != 0xffffffff) && (imstate & (SBIM_IBE | SBIM_TO))) {
+				AND_SBREG(sbh, &sb->sbimstate, ~(SBIM_IBE | SBIM_TO));
+				/* inband = imstate & SBIM_IBE; cmd error */
+				timeout = imstate & SBIM_TO;
+			}
+			tmstate = R_SBREG(sbh, &sb->sbtmstatehigh);
+			if ((tmstate != 0xffffffff) && (tmstate & SBTMH_INT_STATUS)) {
+				sb_serr_clear(sbh);
+				serror = 1;
+				OR_SBREG(sbh, &sb->sbtmstatelow, SBTML_INT_ACK);
+				AND_SBREG(sbh, &sb->sbtmstatelow, ~SBTML_INT_ACK);
+			}
+		}
+
+		sb_setcoreidx(sbh, origidx);
+		INTR_RESTORE(si, intr_val);
+	}
+	
+	if ((inband | timeout | serror) != 0) {
+		rc = TRUE;
+		SB_ERROR(("sb_taclear: inband 0x%x, serror 0x%x, timeout 0x%x!\n", inband, serror, timeout));
+	}
+
+	return (rc);
+}
+
+/* do buffered registers update */
+void
+sb_commit(void *sbh)
+{
+	sb_info_t *si;
+	sbpciregs_t *pciregs;
+	uint origidx;
+	uint intr_val = 0;
+
+	si = SB_INFO(sbh);
+
+	origidx = si->curidx;
+	ASSERT(GOODIDX(origidx));
+
+	INTR_OFF(si, intr_val);
+	/* switch over to pci core */
+	pciregs = (sbpciregs_t*) sb_setcore(sbh, SB_PCI, 0);
+
+	/* do the buffer registers update */
+	W_REG(&pciregs->bcastaddr, SB_COMMIT);
+	W_REG(&pciregs->bcastdata, 0x0);
+
+	/* restore core index */
+	sb_setcoreidx(sbh, origidx);
+	INTR_RESTORE(si, intr_val);
+}
+
+/* reset and re-enable a core */
+void
+sb_core_reset(void *sbh, uint32 bits)
+{
+	sb_info_t *si;
+	sbconfig_t *sb;
+	volatile uint32 dummy;
+
+	si = SB_INFO(sbh);
+	ASSERT(GOODREGS(si->curmap));
+	sb = REGS2SB(si->curmap);
+
+	/*
+	 * Must do the disable sequence first to work for arbitrary current core state.
+	 */
+	sb_core_disable(sbh, bits);
+
+	/*
+	 * Now do the initialization sequence.
+	 */
+
+	/* set reset while enabling the clock and forcing them on throughout the core */
+	W_SBREG(sbh, &sb->sbtmstatelow, (SBTML_FGC | SBTML_CLK | SBTML_RESET | bits));
+	dummy = R_SBREG(sbh, &sb->sbtmstatelow);
+
+	if (sb_coreid(sbh) == SB_ILINE100) {
+		bcm_mdelay(50);
+	} else {
+		OSL_DELAY(1);
+	}
+
+	if (R_SBREG(sbh, &sb->sbtmstatehigh) & SBTMH_SERR) {
+		W_SBREG(sbh, &sb->sbtmstatehigh, 0);
+	}
+	if ((dummy = R_SBREG(sbh, &sb->sbimstate)) & (SBIM_IBE | SBIM_TO)) {
+		AND_SBREG(sbh, &sb->sbimstate, ~(SBIM_IBE | SBIM_TO));
+	}
+
+	/* clear reset and allow it to propagate throughout the core */
+	W_SBREG(sbh, &sb->sbtmstatelow, (SBTML_FGC | SBTML_CLK | bits));
+	dummy = R_SBREG(sbh, &sb->sbtmstatelow);
+	OSL_DELAY(1);
+
+	/* leave clock enabled */
+	W_SBREG(sbh, &sb->sbtmstatelow, (SBTML_CLK | bits));
+	dummy = R_SBREG(sbh, &sb->sbtmstatelow);
+	OSL_DELAY(1);
+}
+
+void
+sb_core_tofixup(void *sbh)
+{
+	sb_info_t *si;
+	sbconfig_t *sb;
+
+	si = SB_INFO(sbh);
+
+	if (si->pcirev >= 5)
+		return;
+
+	ASSERT(GOODREGS(si->curmap));
+	sb = REGS2SB(si->curmap);
+
+	if (si->bus == SB_BUS) {
+		SET_SBREG(sbh, &sb->sbimconfiglow,
+			  SBIMCL_RTO_MASK | SBIMCL_STO_MASK,
+			  (0x5 << SBIMCL_RTO_SHIFT) | 0x3);
+	} else {
+		if (sb_coreid(sbh) == SB_PCI) {
+			SET_SBREG(sbh, &sb->sbimconfiglow,
+				  SBIMCL_RTO_MASK | SBIMCL_STO_MASK,
+				  (0x3 << SBIMCL_RTO_SHIFT) | 0x2);
+		} else {
+			SET_SBREG(sbh, &sb->sbimconfiglow, (SBIMCL_RTO_MASK | SBIMCL_STO_MASK), 0);
+		}
+	}
+
+	sb_commit(sbh);
+}
+
+void
+sb_core_disable(void *sbh, uint32 bits)
+{
+	sb_info_t *si;
+	volatile uint32 dummy;
+	sbconfig_t *sb;
+
+	si = SB_INFO(sbh);
+
+	ASSERT(GOODREGS(si->curmap));
+	sb = REGS2SB(si->curmap);
+
+	/* must return if core is already in reset */
+	if (R_SBREG(sbh, &sb->sbtmstatelow) & SBTML_RESET)
+		return;
+
+	/* put into reset and return if clocks are not enabled */
+	if ((R_SBREG(sbh, &sb->sbtmstatelow) & SBTML_CLK) == 0)
+		goto disable;
+
+	/* set the reject bit */
+	W_SBREG(sbh, &sb->sbtmstatelow, (SBTML_CLK | SBTML_REJ));
+
+	/* spin until reject is set */
+	while ((R_SBREG(sbh, &sb->sbtmstatelow) & SBTML_REJ) == 0)
+		OSL_DELAY(1);
+
+	/* spin until sbtmstatehigh.busy is clear */
+	while (R_SBREG(sbh, &sb->sbtmstatehigh) & SBTMH_BUSY)
+		OSL_DELAY(1);
+
+	/* set reset and reject while enabling the clocks */
+	W_SBREG(sbh, &sb->sbtmstatelow, (bits | SBTML_FGC | SBTML_CLK | SBTML_REJ | SBTML_RESET));
+	dummy = R_SBREG(sbh, &sb->sbtmstatelow);
+	OSL_DELAY(10);
+
+ disable:
+	/* leave reset and reject asserted */
+	W_SBREG(sbh, &sb->sbtmstatelow, (bits | SBTML_REJ | SBTML_RESET));
+	OSL_DELAY(1);
+}
+
+void
+sb_watchdog(void *sbh, uint ticks)
+{
+	sb_info_t *si = SB_INFO(sbh);
+
+	/* instant NMI */
+	switch (si->gpioid) {
+	case SB_CC:
+		sb_corereg(sbh, si->gpioidx, OFFSETOF(chipcregs_t, watchdog), ~0, ticks);
+		break;
+	case SB_EXTIF:
+		sb_corereg(sbh, si->gpioidx, OFFSETOF(extifregs_t, watchdog), ~0, ticks);
+		break;
+	}
+}
+
+/* initialize the pcmcia core */
+void
+sb_pcmcia_init(void *sbh)
+{
+	sb_info_t *si;
+	uint8 cor;
+
+	si = SB_INFO(sbh);
+
+	/* enable d11 mac interrupts */
+	if (si->chip == BCM4301_DEVICE_ID) {
+		/* Have to use FCR2 in 4301 */
+		OSL_PCMCIA_READ_ATTR(si->osh, PCMCIA_FCR2 + PCMCIA_COR, &cor, 1);
+		cor |= COR_IRQEN | COR_FUNEN;
+		OSL_PCMCIA_WRITE_ATTR(si->osh, PCMCIA_FCR2 + PCMCIA_COR, &cor, 1);
+	} else {
+		OSL_PCMCIA_READ_ATTR(si->osh, PCMCIA_FCR0 + PCMCIA_COR, &cor, 1);
+		cor |= COR_IRQEN | COR_FUNEN;
+		OSL_PCMCIA_WRITE_ATTR(si->osh, PCMCIA_FCR0 + PCMCIA_COR, &cor, 1);
+	}
+
+}
+
+
+/*
+ * Configure the pci core for pci client (NIC) action
+ * and get appropriate dma offset value.
+ * coremask is the bitvec of cores by index to be enabled.
+ */
+void
+sb_pci_setup(void *sbh, uint32 *dmaoffset, uint coremask)
+{
+	sb_info_t *si;
+	sbconfig_t *sb;
+	sbpciregs_t *pciregs;
+	uint32 sbflag;
+	uint32 w;
+	uint idx;
+
+	si = SB_INFO(sbh);
+
+	if (dmaoffset)
+		*dmaoffset = 0;
+
+	/* if not pci bus, we're done */
+	if (si->bus != PCI_BUS)
+		return;
+
+	ASSERT(si->pciidx);
+
+	/* get current core index */
+	idx = si->curidx;
+
+	/* we interrupt on this backplane flag number */
+	ASSERT(GOODREGS(si->curmap));
+	sb = REGS2SB(si->curmap);
+	sbflag = R_SBREG(sbh, &sb->sbtpsflag) & SBTPS_NUM0_MASK;
+
+	/* switch over to pci core */
+	pciregs = (sbpciregs_t*) sb_setcoreidx(sbh, si->pciidx);
+	sb = REGS2SB(pciregs);
+
+	/*
+	 * Enable sb->pci interrupts.  Assume
+	 * PCI rev 2.3 support was added in pci core rev 6 and things changed..
+	 */
+	if (si->pcirev < 6) {
+		/* set sbintvec bit for our flag number */
+		OR_SBREG(sbh, &sb->sbintvec, (1 << sbflag));
+	} else {
+		/* pci config write to set this core bit in PCIIntMask */
+		w = OSL_PCI_READ_CONFIG(si->osh, PCI_INT_MASK, sizeof(uint32));
+		w |= (coremask << PCI_SBIM_SHIFT);
+		OSL_PCI_WRITE_CONFIG(si->osh, PCI_INT_MASK, sizeof(uint32), w);
+	}
+
+	/* enable prefetch and bursts for sonics-to-pci translation 2 */
+	OR_REG(&pciregs->sbtopci2, (SBTOPCI_PREF|SBTOPCI_BURST));
+
+	if (si->pcirev < 5) {
+		SET_SBREG(sbh, &sb->sbimconfiglow, SBIMCL_RTO_MASK | SBIMCL_STO_MASK,
+			(0x3 << SBIMCL_RTO_SHIFT) | 0x2);
+		sb_commit(sbh);
+	}
+
+	/* switch back to previous core */
+	sb_setcoreidx(sbh, idx);
+
+	/* use large sb pci dma window */
+	if (dmaoffset)
+		*dmaoffset = SB_PCI_DMA;
+}
+
+uint32
+sb_base(uint32 admatch)
+{
+	uint32 base;
+	uint type;
+
+	type = admatch & SBAM_TYPE_MASK;
+	ASSERT(type < 3);
+
+	base = 0;
+
+	if (type == 0) {
+		base = admatch & SBAM_BASE0_MASK;
+	} else if (type == 1) {
+		ASSERT(!(admatch & SBAM_ADNEG));	/* neg not supported */
+		base = admatch & SBAM_BASE1_MASK;
+	} else if (type == 2) {
+		ASSERT(!(admatch & SBAM_ADNEG));	/* neg not supported */
+		base = admatch & SBAM_BASE2_MASK;
+	}
+
+	return (base);
+}
+
+uint32
+sb_size(uint32 admatch)
+{
+	uint32 size;
+	uint type;
+
+	type = admatch & SBAM_TYPE_MASK;
+	ASSERT(type < 3);
+
+	size = 0;
+
+	if (type == 0) {
+		size = 1 << (((admatch & SBAM_ADINT0_MASK) >> SBAM_ADINT0_SHIFT) + 1);
+	} else if (type == 1) {
+		ASSERT(!(admatch & SBAM_ADNEG));	/* neg not supported */
+		size = 1 << (((admatch & SBAM_ADINT1_MASK) >> SBAM_ADINT1_SHIFT) + 1);
+	} else if (type == 2) {
+		ASSERT(!(admatch & SBAM_ADNEG));	/* neg not supported */
+		size = 1 << (((admatch & SBAM_ADINT2_MASK) >> SBAM_ADINT2_SHIFT) + 1);
+	}
+
+	return (size);
+}
+
+/* return the core-type instantiation # of the current core */
+uint
+sb_coreunit(void *sbh)
+{
+	sb_info_t *si;
+	uint idx;
+	uint coreid;
+	uint coreunit;
+	uint i;
+
+	si = SB_INFO(sbh);
+	coreunit = 0;
+
+	idx = si->curidx;
+
+	ASSERT(GOODREGS(si->curmap));
+	coreid = sb_coreid(sbh);
+
+	/* count the cores of our type */
+	for (i = 0; i < idx; i++)
+		if (si->coreid[i] == coreid)
+			coreunit++;
+
+	return (coreunit);
+}
+
+static INLINE uint32
+factor6(uint32 x)
+{
+	switch (x) {
+	case CC_F6_2:	return 2;
+	case CC_F6_3:	return 3;
+	case CC_F6_4:	return 4;
+	case CC_F6_5:	return 5;
+	case CC_F6_6:	return 6;
+	case CC_F6_7:	return 7;
+	default:	return 0;
+	}
+}
+
+/* calculate the speed the SB would run at given a set of clockcontrol values */
+uint32
+sb_clock_rate(uint32 pll_type, uint32 n, uint32 m)
+{
+	uint32 n1, n2, clock, m1, m2, m3, mc;
+
+	n1 = n & CN_N1_MASK;
+	n2 = (n & CN_N2_MASK) >> CN_N2_SHIFT;
+
+	if ((pll_type == PLL_TYPE1) || (pll_type == PLL_TYPE4)) {
+		n1 = factor6(n1);
+		n2 += CC_F5_BIAS;
+	} else if (pll_type == PLL_TYPE2) {
+		n1 += CC_T2_BIAS;
+		n2 += CC_T2_BIAS;
+		ASSERT((n1 >= 2) && (n1 <= 7));
+		ASSERT((n2 >= 5) && (n2 <= 23));
+	} else if (pll_type == PLL_TYPE3) {
+		return (100000000);
+	} else
+		ASSERT((pll_type >= PLL_TYPE1) && (pll_type <= PLL_TYPE4));
+
+	clock = CC_CLOCK_BASE * n1 * n2;
+
+	if (clock == 0)
+		return 0;
+
+	m1 = m & CC_M1_MASK;
+	m2 = (m & CC_M2_MASK) >> CC_M2_SHIFT;
+	m3 = (m & CC_M3_MASK) >> CC_M3_SHIFT;
+	mc = (m & CC_MC_MASK) >> CC_MC_SHIFT;
+
+	if ((pll_type == PLL_TYPE1) || (pll_type == PLL_TYPE4)) {
+		m1 = factor6(m1);
+		if (pll_type == PLL_TYPE1)
+			m2 += CC_F5_BIAS;
+		else
+			m2 = factor6(m2);
+		m3 = factor6(m3);
+
+		switch (mc) {
+		case CC_MC_BYPASS:	return (clock);
+		case CC_MC_M1:		return (clock / m1);
+		case CC_MC_M1M2:	return (clock / (m1 * m2));
+		case CC_MC_M1M2M3:	return (clock / (m1 * m2 * m3));
+		case CC_MC_M1M3:	return (clock / (m1 * m3));
+		default:		return (0);
+		}
+	} else {
+		ASSERT(pll_type == PLL_TYPE2);
+
+		m1 += CC_T2_BIAS;
+		m2 += CC_T2M2_BIAS;
+		m3 += CC_T2_BIAS;
+		ASSERT((m1 >= 2) && (m1 <= 7));
+		ASSERT((m2 >= 3) && (m2 <= 10));
+		ASSERT((m3 >= 2) && (m3 <= 7));
+
+		if ((mc & CC_T2MC_M1BYP) == 0)
+			clock /= m1;
+		if ((mc & CC_T2MC_M2BYP) == 0)
+			clock /= m2;
+		if ((mc & CC_T2MC_M3BYP) == 0)
+			clock /= m3;
+
+		return(clock);
+	}
+}
+
+/* returns the current speed the SB is running at */
+uint32
+sb_clock(void *sbh)
+{
+	sb_info_t *si;
+	extifregs_t *eir;
+	chipcregs_t *cc;
+	uint32 n, m;
+	uint idx;
+	uint32 pll_type, rate;
+	uint intr_val = 0;
+
+	si = SB_INFO(sbh);
+	idx = si->curidx;
+	pll_type = PLL_TYPE1;
+
+	INTR_OFF(si, intr_val);
+
+	/* switch to extif or chipc core */
+	if ((eir = (extifregs_t *) sb_setcore(sbh, SB_EXTIF, 0))) {
+		n = R_REG(&eir->clockcontrol_n);
+		m = R_REG(&eir->clockcontrol_sb);
+	} else if ((cc = (chipcregs_t *) sb_setcore(sbh, SB_CC, 0))) {
+		pll_type = R_REG(&cc->capabilities) & CAP_PLL_MASK;
+		n = R_REG(&cc->clockcontrol_n);
+		m = R_REG(&cc->clockcontrol_sb);
+	} else {
+		INTR_RESTORE(si, intr_val);
+		return 0;
+	}
+
+	/* calculate rate */
+	rate = sb_clock_rate(pll_type, n, m);
+
+	/* switch back to previous core */
+	sb_setcoreidx(sbh, idx);
+
+	INTR_RESTORE(si, intr_val);
+
+	return rate;
+}
+
+/* change logical "focus" to the gpio core for optimized access */
+void*
+sb_gpiosetcore(void *sbh)
+{
+	sb_info_t *si;
+
+	si = SB_INFO(sbh);
+
+	return (sb_setcoreidx(sbh, si->gpioidx));
+}
+
+/* mask&set gpiocontrol bits */
+uint32
+sb_gpiocontrol(void *sbh, uint32 mask, uint32 val)
+{
+	sb_info_t *si;
+	uint regoff;
+
+	si = SB_INFO(sbh);
+	regoff = 0;
+
+	switch (si->gpioid) {
+	case SB_CC:
+		regoff = OFFSETOF(chipcregs_t, gpiocontrol);
+		break;
+
+	case SB_PCI:
+		regoff = OFFSETOF(sbpciregs_t, gpiocontrol);
+		break;
+
+	case SB_EXTIF:
+		return (0);
+	}
+
+	return (sb_corereg(sbh, si->gpioidx, regoff, mask, val));
+}
+
+/* mask&set gpio output enable bits */
+uint32
+sb_gpioouten(void *sbh, uint32 mask, uint32 val)
+{
+	sb_info_t *si;
+	uint regoff;
+
+	si = SB_INFO(sbh);
+	regoff = 0;
+
+	switch (si->gpioid) {
+	case SB_CC:
+		regoff = OFFSETOF(chipcregs_t, gpioouten);
+		break;
+
+	case SB_PCI:
+		regoff = OFFSETOF(sbpciregs_t, gpioouten);
+		break;
+
+	case SB_EXTIF:
+		regoff = OFFSETOF(extifregs_t, gpio[0].outen);
+		break;
+	}
+
+	return (sb_corereg(sbh, si->gpioidx, regoff, mask, val));
+}
+
+/* mask&set gpio output bits */
+uint32
+sb_gpioout(void *sbh, uint32 mask, uint32 val)
+{
+	sb_info_t *si;
+	uint regoff;
+
+	si = SB_INFO(sbh);
+	regoff = 0;
+
+	switch (si->gpioid) {
+	case SB_CC:
+		regoff = OFFSETOF(chipcregs_t, gpioout);
+		break;
+
+	case SB_PCI:
+		regoff = OFFSETOF(sbpciregs_t, gpioout);
+		break;
+
+	case SB_EXTIF:
+		regoff = OFFSETOF(extifregs_t, gpio[0].out);
+		break;
+	}
+
+	return (sb_corereg(sbh, si->gpioidx, regoff, mask, val));
+}
+
+/* return the current gpioin register value */
+uint32
+sb_gpioin(void *sbh)
+{
+	sb_info_t *si;
+	uint regoff;
+
+	si = SB_INFO(sbh);
+	regoff = 0;
+
+	switch (si->gpioid) {
+	case SB_CC:
+		regoff = OFFSETOF(chipcregs_t, gpioin);
+		break;
+
+	case SB_PCI:
+		regoff = OFFSETOF(sbpciregs_t, gpioin);
+		break;
+
+	case SB_EXTIF:
+		regoff = OFFSETOF(extifregs_t, gpioin);
+		break;
+	}
+
+	return (sb_corereg(sbh, si->gpioidx, regoff, 0, 0));
+}
+
+/* mask&set gpio interrupt polarity bits */
+uint32
+sb_gpiointpolarity(void *sbh, uint32 mask, uint32 val)
+{
+	sb_info_t *si;
+	uint regoff;
+
+	si = SB_INFO(sbh);
+	regoff = 0;
+
+	switch (si->gpioid) {
+	case SB_CC:
+		regoff = OFFSETOF(chipcregs_t, gpiointpolarity);
+		break;
+
+	case SB_PCI:
+		/* pci gpio implementation does not support interrupt polarity */
+		ASSERT(0);
+		break;
+
+	case SB_EXTIF:
+		regoff = OFFSETOF(extifregs_t, gpiointpolarity);
+		break;
+	}
+
+	return (sb_corereg(sbh, si->gpioidx, regoff, mask, val));
+}
+
+/* mask&set gpio interrupt mask bits */
+uint32
+sb_gpiointmask(void *sbh, uint32 mask, uint32 val)
+{
+	sb_info_t *si;
+	uint regoff;
+
+	si = SB_INFO(sbh);
+	regoff = 0;
+
+	switch (si->gpioid) {
+	case SB_CC:
+		regoff = OFFSETOF(chipcregs_t, gpiointmask);
+		break;
+
+	case SB_PCI:
+		/* pci gpio implementation does not support interrupt mask */
+		ASSERT(0);
+		break;
+
+	case SB_EXTIF:
+		regoff = OFFSETOF(extifregs_t, gpiointmask);
+		break;
+	}
+
+	return (sb_corereg(sbh, si->gpioidx, regoff, mask, val));
+}
+
+
+/*
+ * Return the slow clock source.
+ * Three sources of SLOW CLOCK: LPO, Xtal, PCI
+ */
+static uint
+sb_slowclk_src(void *sbh)
+{
+	sb_info_t *si;
+	chipcregs_t *cc;
+	uint32 v;
+
+	si = SB_INFO(sbh);
+
+	ASSERT(sb_coreid(sbh) == SB_CC);
+
+	if (si->ccrev < 6) {
+		switch (si->bus) {
+			case PCMCIA_BUS: return (SCC_SS_XTAL);
+			case PCI_BUS:
+				v = OSL_PCI_READ_CONFIG(si->osh, PCI_GPIO_OUT, sizeof (uint32));
+				if (v & PCI_CFG_GPIO_SCS)
+					return (SCC_SS_PCI);
+				else
+					return (SCC_SS_XTAL);
+			default: return (SCC_SS_XTAL);
+		}
+	} else if (si->ccrev < 10) {
+		cc = (chipcregs_t*) sb_setcoreidx(sbh, si->curidx);
+		v = R_REG(&cc->slow_clk_ctl) & SCC_SS_MASK;
+		return (v);
+	} else {
+		return (SCC_SS_XTAL);
+	}
+}
+
+/*
+ * Return the slowclock min or max frequency.
+ * Three sources of SLOW CLOCK:
+ *	1. On Chip LPO		-	32khz or 160khz
+ *	2. On Chip Xtal OSC	-	20mhz/4*(divider+1)
+ *	3. External PCI clock	-	66mhz/4*(divider+1)
+ */
+static uint
+sb_slowclk_freq(void *sbh, bool max)
+{
+	sb_info_t *si;
+	chipcregs_t *cc;
+	uint32 slowclk;
+	uint div;
+
+	si = SB_INFO(sbh);
+
+	ASSERT(sb_coreid(sbh) == SB_CC);
+
+	cc = (chipcregs_t*) sb_setcoreidx(sbh, si->curidx);
+
+	/* shouldn't be here unless we've established the chip has dynamic power control */
+	ASSERT(R_REG(&cc->capabilities) & CAP_PWR_CTL);
+
+	slowclk = sb_slowclk_src(sbh);
+	if (si->ccrev < 6) {
+		if (slowclk == SCC_SS_PCI)
+			return (max? (PCIMAXFREQ/64) : (PCIMINFREQ/64));
+		else
+			return (max? (XTALMAXFREQ/32) : (XTALMINFREQ/32));
+	} else if (si->ccrev < 10) {
+		div = 4 * (((R_REG(&cc->slow_clk_ctl) & SCC_CD_MASK) >> SCC_CD_SHF) + 1);
+		if (slowclk == SCC_SS_LPO)
+			return (max? LPOMAXFREQ : LPOMINFREQ);
+		else if (slowclk == SCC_SS_XTAL)
+			return (max? (XTALMAXFREQ/div) : (XTALMINFREQ/div));
+		else if (slowclk == SCC_SS_PCI)
+			return (max? (PCIMAXFREQ/div) : (PCIMINFREQ/div));
+		else
+			ASSERT(0);
+	} else {
+		/* Chipc rev 10 is InstaClock */
+		div = R_REG(&cc->system_clk_ctl) >> SYCC_CD_SHF;
+		div = 4 * (div + 1);
+		return (max ? XTALMAXFREQ : (XTALMINFREQ/div));
+	}
+	return (0);
+}
+
+static void
+sb_pwrctl_setdelay(void *sbh, void *chipcregs)
+{
+	chipcregs_t * cc;
+	uint slowmaxfreq, pll_delay, slowclk;
+	uint pll_on_delay, fref_sel_delay;
+
+	pll_delay = PLL_DELAY;
+
+	/* If the slow clock is not sourced by the xtal then add the xtal_on_delay
+	 * since the xtal will also be powered down by dynamic power control logic.
+	 */
+	slowclk = sb_slowclk_src(sbh);
+	if (slowclk != SCC_SS_XTAL)
+		pll_delay += XTAL_ON_DELAY;
+
+	slowmaxfreq = sb_slowclk_freq(sbh, TRUE);
+
+	pll_on_delay = ((slowmaxfreq * pll_delay) + 999999) / 1000000;
+	fref_sel_delay = ((slowmaxfreq * FREF_DELAY) + 999999) / 1000000;
+
+	cc = (chipcregs_t *)chipcregs;
+	W_REG(&cc->pll_on_delay, pll_on_delay);
+	W_REG(&cc->fref_sel_delay, fref_sel_delay);
+}
+
+/* set or get slow clock divider */
+int
+sb_pwrctl_slowclk(void *sbh, bool set, uint *div)
+{
+	sb_info_t *si;
+	uint origidx;
+	chipcregs_t *cc;
+	uint intr_val = 0;
+	uint err = 0;
+	
+	si = SB_INFO(sbh);
+
+	/* chipcommon cores prior to rev6 don't support slowclkcontrol */
+	if (si->ccrev < 6)
+		return 1;
+
+	/* chipcommon cores rev10 are a whole new ball game */
+	if (si->ccrev >= 10)
+		return 1;
+
+	if (set && ((*div % 4) || (*div < 4)))
+		return 2;
+	
+	INTR_OFF(si, intr_val);
+	origidx = si->curidx;
+	cc = (chipcregs_t*) sb_setcore(sbh, SB_CC, 0);
+	ASSERT(cc != NULL);
+	
+	if (!(R_REG(&cc->capabilities) & CAP_PWR_CTL)) {
+		err = 3;
+		goto done;
+	}
+
+	if (set) {
+		SET_REG(&cc->slow_clk_ctl, SCC_CD_MASK, ((*div / 4 - 1) << SCC_CD_SHF));
+		sb_pwrctl_setdelay(sbh, (void *)cc);
+	} else
+		*div = 4 * (((R_REG(&cc->slow_clk_ctl) & SCC_CD_MASK) >> SCC_CD_SHF) + 1);
+
+done:
+	sb_setcoreidx(sbh, origidx);
+	INTR_RESTORE(si, intr_val);
+	return err;
+}
+
+/* initialize power control delay registers */
+void
+sb_pwrctl_init(void *sbh)
+{
+	sb_info_t *si;
+	uint origidx;
+	chipcregs_t *cc;
+
+	si = SB_INFO(sbh);
+
+	if (si->bus == SB_BUS)
+		return;
+
+	origidx = si->curidx;
+
+	if ((cc = (chipcregs_t*) sb_setcore(sbh, SB_CC, 0)) == NULL)
+		return;
+
+	if (!(R_REG(&cc->capabilities) & CAP_PWR_CTL))
+		goto done;
+
+	/* 4317pc does not work with SlowClock less than 5Mhz */
+	if (si->bus == PCMCIA_BUS) {
+		if ((si->ccrev >= 6) && (si->ccrev < 10))
+			SET_REG(&cc->slow_clk_ctl, SCC_CD_MASK, (SCC_DEF_DIV << SCC_CD_SHF));
+	}
+	
+	sb_pwrctl_setdelay(sbh, (void *)cc);
+
+done:
+	sb_setcoreidx(sbh, origidx);
+}
+
+/* return the value suitable for writing to the dot11 core FAST_PWRUP_DELAY register */
+uint16
+sb_pwrctl_fast_pwrup_delay(void *sbh)
+{
+	sb_info_t *si;
+	uint origidx;
+	chipcregs_t *cc;
+	uint slowminfreq;
+	uint16 fpdelay;
+	uint intr_val = 0;
+
+	si = SB_INFO(sbh);
+	fpdelay = 0;
+	origidx = si->curidx;
+
+	if (si->bus == SB_BUS)
+		goto done;
+
+	INTR_OFF(si, intr_val);
+
+	if ((cc = (chipcregs_t*) sb_setcore(sbh, SB_CC, 0)) == NULL)
+		goto done;
+
+	if (!(R_REG(&cc->capabilities) & CAP_PWR_CTL))
+		goto done;
+
+	slowminfreq = sb_slowclk_freq(sbh, FALSE);
+	fpdelay = (((R_REG(&cc->pll_on_delay) + 2) * 1000000) + (slowminfreq - 1)) / slowminfreq;
+
+done:
+	sb_setcoreidx(sbh, origidx);
+	INTR_RESTORE(si, intr_val);
+	return (fpdelay);
+}
+
+/* turn primary xtal and/or pll off/on */
+int
+sb_pwrctl_xtal(void *sbh, uint what, bool on)
+{
+	sb_info_t *si;
+	uint32 in, out, outen;
+
+	si = SB_INFO(sbh);
+
+	switch (si->bus) {
+
+
+		case PCMCIA_BUS:
+			return (0);
+
+
+		case PCI_BUS:
+
+			in = OSL_PCI_READ_CONFIG(si->osh, PCI_GPIO_IN, sizeof (uint32));
+			out = OSL_PCI_READ_CONFIG(si->osh, PCI_GPIO_OUT, sizeof (uint32));
+			outen = OSL_PCI_READ_CONFIG(si->osh, PCI_GPIO_OUTEN, sizeof (uint32));
+
+			/*
+			 * We can't actually read the state of the PLLPD so we infer it
+			 * by the value of XTAL_PU which *is* readable via gpioin.
+			 */
+			if (on && (in & PCI_CFG_GPIO_XTAL))
+				return (0);
+
+			if (what & XTAL)
+				outen |= PCI_CFG_GPIO_XTAL;
+			if (what & PLL)
+				outen |= PCI_CFG_GPIO_PLL;
+
+			if (on) {
+				/* turn primary xtal on */
+				if (what & XTAL) {
+					out |= PCI_CFG_GPIO_XTAL;
+					if (what & PLL)
+						out |= PCI_CFG_GPIO_PLL;
+					OSL_PCI_WRITE_CONFIG(si->osh, PCI_GPIO_OUT, sizeof (uint32), out);
+					OSL_PCI_WRITE_CONFIG(si->osh, PCI_GPIO_OUTEN, sizeof (uint32), outen);
+					OSL_DELAY(XTAL_ON_DELAY);
+				}
+
+				/* turn pll on */
+				if (what & PLL) {
+					out &= ~PCI_CFG_GPIO_PLL;
+					OSL_PCI_WRITE_CONFIG(si->osh, PCI_GPIO_OUT, sizeof (uint32), out);
+					OSL_DELAY(2000);
+				}
+			} else {
+				if (what & XTAL)
+					out &= ~PCI_CFG_GPIO_XTAL;
+				if (what & PLL)
+					out |= PCI_CFG_GPIO_PLL;
+				OSL_PCI_WRITE_CONFIG(si->osh, PCI_GPIO_OUT, sizeof (uint32), out);
+				OSL_PCI_WRITE_CONFIG(si->osh, PCI_GPIO_OUTEN, sizeof (uint32), outen);
+			}
+
+		default:
+			return (-1);
+	}
+
+	return (0);
+}
+
+/* set dynamic power control mode (forceslow, forcefast, dynamic) */
+/*   returns true if ignore pll off is set and false if it is not */
+bool
+sb_pwrctl_clk(void *sbh, uint mode)
+{
+	sb_info_t *si;
+	uint origidx;
+	chipcregs_t *cc;
+	uint32 scc;
+	bool forcefastclk=FALSE;
+	uint intr_val = 0;
+
+	si = SB_INFO(sbh);
+
+	/* chipcommon cores prior to rev6 don't support slowclkcontrol */
+	if (si->ccrev < 6)
+		return (FALSE);
+
+	/* chipcommon cores rev10 are a whole new ball game */
+	if (si->ccrev >= 10)
+		return (FALSE);
+
+	INTR_OFF(si, intr_val);
+
+	origidx = si->curidx;
+
+	cc = (chipcregs_t*) sb_setcore(sbh, SB_CC, 0);
+	ASSERT(cc != NULL);
+
+	if (!(R_REG(&cc->capabilities) & CAP_PWR_CTL))
+		goto done;
+
+	switch (mode) {
+	case CLK_FAST:	/* force fast (pll) clock */
+		/* don't forget to force xtal back on before we clear SCC_DYN_XTAL.. */
+		sb_pwrctl_xtal(sbh, XTAL, ON);
+
+		SET_REG(&cc->slow_clk_ctl, (SCC_XC | SCC_FS | SCC_IP), SCC_IP);
+		break;
+
+	case CLK_SLOW:	/* force slow clock */
+		if ((si->bus == SDIO_BUS) || (si->bus == PCMCIA_BUS))
+			return (-1);
+
+		if (si->ccrev >= 6)
+			OR_REG(&cc->slow_clk_ctl, SCC_FS);
+		break;
+
+	case CLK_DYNAMIC:	/* enable dynamic power control */
+		scc = R_REG(&cc->slow_clk_ctl);
+		scc &= ~(SCC_FS | SCC_IP | SCC_XC);
+		if ((scc & SCC_SS_MASK) != SCC_SS_XTAL)
+			scc |= SCC_XC;
+		W_REG(&cc->slow_clk_ctl, scc);
+
+		/* for dynamic control, we have to release our xtal_pu "force on" */
+		if (scc & SCC_XC)
+			sb_pwrctl_xtal(sbh, XTAL, OFF);
+		break;
+	}
+
+	/* Is the h/w forcing the use of the fast clk */
+	forcefastclk = (bool)((R_REG(&cc->slow_clk_ctl) & SCC_IP) == SCC_IP);
+
+done:
+	sb_setcoreidx(sbh, origidx);
+	INTR_RESTORE(si, intr_val);
+	return (forcefastclk);
+}
+
+/* register driver interrupt disabling and restoring callback functions */
+void
+sb_register_intr_callback(void *sbh, void *intrsoff_fn, void *intrsrestore_fn, void *intrsenabled_fn, void *intr_arg)
+{
+	sb_info_t *si;
+
+	si = SB_INFO(sbh);
+	si->intr_arg = intr_arg;
+	si->intrsoff_fn = (sb_intrsoff_t)intrsoff_fn;
+	si->intrsrestore_fn = (sb_intrsrestore_t)intrsrestore_fn;
+	si->intrsenabled_fn = (sb_intrsenabled_t)intrsenabled_fn;
+	/* save current core id.  when this function called, the current core
+	 * must be the core which provides driver functions(il, et, wl, etc.)
+	 */
+	si->dev_coreid = si->coreid[si->curidx];
+}
+
+