move package/linux into target/linux, use wbx' new kernel code. support building images with more than one kernel, split kernel module parts off of packages that use their own kernel modules (fuse, shfs, openswan). some cleanup in the image building process in target/. image builder is disabled for now, needs some fixing.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@1085 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 0 insertions, 120 deletions

diff --git a/openwrt/package/linux/kernel-source/arch/mips/brcm-boards/generic/gdb_hook.c b/openwrt/package/linux/kernel-source/arch/mips/brcm-boards/generic/gdb_hook.c
deleted file mode 100644
index 1345289bb..000000000
--- a/openwrt/package/linux/kernel-source/arch/mips/brcm-boards/generic/gdb_hook.c
+++ /dev/null
@@ -1,120 +0,0 @@
-/*
- * Copyright 2004, Broadcom Corporation      
- * All Rights Reserved.      
- *       
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY      
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM      
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS      
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.      
- *
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved.
- *
- * ########################################################################
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * ########################################################################
- *
- * This is the interface to the remote debugger stub.
- *
- */
-
-#include <linux/serialP.h>
-#include <linux/serial_reg.h>
-
-#include <asm/serial.h>
-#include <asm/io.h>
-
-static struct async_struct kdb_port_info = {0};
-
-static __inline__ unsigned int serial_in(struct async_struct *info, int offset)
-{
-	return readb((unsigned long) info->iomem_base +
-		     (offset<<info->iomem_reg_shift));
-}
-
-static __inline__ void serial_out(struct async_struct *info, int offset,
-				  int value)
-{
-	writeb(value, (unsigned long) info->iomem_base +
-	       (offset<<info->iomem_reg_shift));
-}
-
-void rs_kgdb_hook(struct serial_state *ser) {
-	int t;
-
-	kdb_port_info.state = ser;
-	kdb_port_info.magic = SERIAL_MAGIC;
-	kdb_port_info.port = ser->port;
-	kdb_port_info.flags = ser->flags;
-	kdb_port_info.iomem_base = ser->iomem_base;
-	kdb_port_info.iomem_reg_shift = ser->iomem_reg_shift;
-	kdb_port_info.MCR = UART_MCR_DTR | UART_MCR_RTS;
-
-	/*
-	 * Clear all interrupts
-	 */
-	serial_in(&kdb_port_info, UART_LSR);
-	serial_in(&kdb_port_info, UART_RX);
-	serial_in(&kdb_port_info, UART_IIR);
-	serial_in(&kdb_port_info, UART_MSR);
-
-	/*
-	 * Now, initialize the UART 
-	 */
-	serial_out(&kdb_port_info, UART_LCR, UART_LCR_WLEN8);	/* reset DLAB */
-	serial_out(&kdb_port_info, UART_MCR, kdb_port_info.MCR);
-	
-	/*
-	 * and set the speed of the serial port
-	 * (currently hardwired to 115200 8N1
-	 */
-
-	/* baud rate is fixed to 115200 (is this sufficient?)*/
-	t = kdb_port_info.state->baud_base / 115200;	
-	/* set DLAB */
-	serial_out(&kdb_port_info, UART_LCR, UART_LCR_WLEN8 | UART_LCR_DLAB);
-	serial_out(&kdb_port_info, UART_DLL, t & 0xff);/* LS of divisor */
-	serial_out(&kdb_port_info, UART_DLM, t >> 8);  /* MS of divisor */
-	/* reset DLAB */
-	serial_out(&kdb_port_info, UART_LCR, UART_LCR_WLEN8);
-}
-
-int putDebugChar(char c)
-{
-
-	if (!kdb_port_info.state) { 	/* need to init device first */
-		return 0;
-	}
-
-	while ((serial_in(&kdb_port_info, UART_LSR) & UART_LSR_THRE) == 0)
-		;
-
-	serial_out(&kdb_port_info, UART_TX, c);
-
-	return 1;
-}
-
-char getDebugChar(void) 
-{
-	if (!kdb_port_info.state) { 	/* need to init device first */
-		return 0;
-	}
-
-	while (!(serial_in(&kdb_port_info, UART_LSR) & 1))
-		;
-
-	return(serial_in(&kdb_port_info, UART_RX));
-}