removed the old directories, too.. cleanup is ready, yay

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@2130 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 0 insertions, 187 deletions

diff --git a/obsolete-buildroot/sources/boa.conf b/obsolete-buildroot/sources/boa.conf
deleted file mode 100644
index 91653e550..000000000
--- a/obsolete-buildroot/sources/boa.conf
+++ /dev/null
@@ -1,187 +0,0 @@
-# Boa v0.94 configuration file
-# File format has not changed from 0.93
-# File format has changed little from 0.92
-# version changes are noted in the comments
-#
-# The Boa configuration file is parsed with a lex/yacc or flex/bison
-# generated parser.  If it reports an error, the line number will be
-# provided; it should be easy to spot.  The syntax of each of these
-# rules is very simple, and they can occur in any order.  Where possible
-# these directives mimic those of NCSA httpd 1.3; I saw no reason to 
-# introduce gratuitous differences.
-
-# $Id$
-
-# The "ServerRoot" is not in this configuration file.  It can be compiled
-# into the server (see defines.h) or specified on the command line with
-# the -c option, for example:
-#
-# boa -c /usr/local/boa
-
-
-# Port: The port Boa runs on.  The default port for http servers is 80.
-# If it is less than 1024, the server must be started as root.
-
-Port 80
-
-# Listen: the Internet address to bind(2) to.  If you leave it out,
-# it takes the behavior before 0.93.17.2, which is to bind to all
-# addresses (INADDR_ANY).  You only get one "Listen" directive,
-# if you want service on multiple IP addresses, you have three choices:
-#    1. Run boa without a "Listen" directive
-#       a. All addresses are treated the same; makes sense if the addresses
-#          are localhost, ppp, and eth0.
-#       b. Use the VirtualHost directive below to point requests to different
-#          files.  Should be good for a very large number of addresses (web
-#          hosting clients).
-#    2. Run one copy of boa per IP address, each has its own configuration
-#       with a "Listen" directive.  No big deal up to a few tens of addresses.
-#       Nice separation between clients.
-# The name you provide gets run through inet_aton(3), so you have to use dotted
-# quad notation.  This configuration is too important to trust some DNS.
-
-#Listen 192.68.0.5
-
-#  User: The name or UID the server should run as.
-# Group: The group name or GID the server should run as.
-
-User nobody
-Group nobody
-
-# ServerAdmin: The email address where server problems should be sent.
-# Note: this is not currently used, except as an environment variable
-# for CGIs.
-
-#ServerAdmin root@localhost
-
-# ErrorLog: The location of the error log file. If this does not start
-# with /, it is considered relative to the server root.
-# Set to /dev/null if you don't want errors logged.
-# If unset, defaults to /dev/stderr
-
-ErrorLog /var/log/boa/error_log
-# Please NOTE: Sending the logs to a pipe ('|'), as shown below,
-#  is somewhat experimental and might fail under heavy load.
-# "Usual libc implementations of printf will stall the whole
-#  process if the receiving end of a pipe stops reading."
-#ErrorLog "|/usr/sbin/cronolog --symlink=/var/log/boa/error_log /var/log/boa/error-%Y%m%d.log"
-
-# AccessLog: The location of the access log file. If this does not
-# start with /, it is considered relative to the server root.
-# Comment out or set to /dev/null (less effective) to disable 
-# Access logging.
-
-AccessLog /var/log/boa/access_log
-# Please NOTE: Sending the logs to a pipe ('|'), as shown below,
-#  is somewhat experimental and might fail under heavy load.
-# "Usual libc implementations of printf will stall the whole
-#  process if the receiving end of a pipe stops reading."
-#AccessLog  "|/usr/sbin/cronolog --symlink=/var/log/boa/access_log /var/log/boa/access-%Y%m%d.log"
-
-# UseLocaltime: Logical switch.  Uncomment to use localtime 
-# instead of UTC time
-#UseLocaltime
-
-# VerboseCGILogs: this is just a logical switch.
-#  It simply notes the start and stop times of cgis in the error log
-# Comment out to disable.
-
-#VerboseCGILogs
-
-# ServerName: the name of this server that should be sent back to 
-# clients if different than that returned by gethostname + gethostbyname 
-
-#ServerName www.your.org.here
-
-# VirtualHost: a logical switch.
-# Comment out to disable.
-# Given DocumentRoot /var/www, requests on interface 'A' or IP 'IP-A'
-# become /var/www/IP-A.
-# Example: http://localhost/ becomes /var/www/127.0.0.1
-#
-# Not used until version 0.93.17.2.  This "feature" also breaks commonlog
-# output rules, it prepends the interface number to each access_log line.
-# You are expected to fix that problem with a postprocessing script.
-
-#VirtualHost 
-
-# DocumentRoot: The root directory of the HTML documents.
-# Comment out to disable server non user files.
-
-DocumentRoot /var/www
-
-# UserDir: The name of the directory which is appended onto a user's home
-# directory if a ~user request is recieved.
-
-UserDir public_html
-
-# DirectoryIndex: Name of the file to use as a pre-written HTML
-# directory index.  Please MAKE AND USE THESE FILES.  On the
-# fly creation of directory indexes can be _slow_.
-# Comment out to always use DirectoryMaker
-
-DirectoryIndex index.html
-
-# DirectoryMaker: Name of program used to create a directory listing.
-# Comment out to disable directory listings.  If both this and
-# DirectoryIndex are commented out, accessing a directory will give
-# an error (though accessing files in the directory are still ok).
-
-DirectoryMaker /usr/lib/boa/boa_indexer
-
-# DirectoryCache: If DirectoryIndex doesn't exist, and DirectoryMaker
-# has been commented out, the the on-the-fly indexing of Boa can be used
-# to generate indexes of directories. Be warned that the output is 
-# extremely minimal and can cause delays when slow disks are used.
-# Note: The DirectoryCache must be writable by the same user/group that 
-# Boa runs as.
-
-# DirectoryCache /var/spool/boa/dircache
-
-# KeepAliveMax: Number of KeepAlive requests to allow per connection
-# Comment out, or set to 0 to disable keepalive processing
-
-KeepAliveMax 1000
-
-# KeepAliveTimeout: seconds to wait before keepalive connection times out
-
-KeepAliveTimeout 10
-
-# MimeTypes: This is the file that is used to generate mime type pairs
-# and Content-Type fields for boa.
-# Set to /dev/null if you do not want to load a mime types file.
-# Do *not* comment out (better use AddType!)
-
-MimeTypes /etc/mime.types
-
-# DefaultType: MIME type used if the file extension is unknown, or there
-# is no file extension.
-
-DefaultType text/plain
-
-# AddType: adds types without editing mime.types
-# Example: AddType type extension [extension ...]
-
-# Uncomment the next line if you want .cgi files to execute from anywhere
-#AddType application/x-httpd-cgi cgi
-
-# Redirect, Alias, and ScriptAlias all have the same semantics -- they
-# match the beginning of a request and take appropriate action.  Use
-# Redirect for other servers, Alias for the same server, and ScriptAlias
-# to enable directories for script execution.
-
-# Redirect allows you to tell clients about documents which used to exist in
-# your server's namespace, but do not anymore. This allows you to tell the
-# clients where to look for the relocated document.
-# Example: Redirect /bar http://elsewhere/feh/bar
-
-# Aliases: Aliases one path to another.
-# Example: Alias /path1/bar /path2/foo
-
-# Alias /doc /usr/doc
-
-# ScriptAlias: Maps a virtual path to a directory for serving scripts
-# Example: ScriptAlias /htbin/ /www/htbin/
-
-ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/
-