removed the old directories, too.. cleanup is ready, yay

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@2130 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 0 insertions, 241 deletions

diff --git a/obsolete-buildroot/make/openwrt.mk b/obsolete-buildroot/make/openwrt.mk
deleted file mode 100644
index 6b77c2c56..000000000
--- a/obsolete-buildroot/make/openwrt.mk
+++ /dev/null
@@ -1,241 +0,0 @@
-# Makefile for to build the base openwrt
-#
-# Copyright (C) 2004 Manuel Novoa III <mjn3@uclibc.org>
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-#
-######################################################################
-#
-# WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! WARNING!
-#
-# Currently the dependencies are not all handled.  But that's true of
-# our buildroot in general, since it wasn't really set up for end users.
-
-OPENWRT_TARGETS:= $(STAGING_DIR)/bin/sstrip gcc3_3 openwrt-linux openwrt-kmodules.tar.bz2 \
-	openwrt-shared openwrt-mtd openwrt-nvram openwrt-wlconf \
-	bridge dnsmasq1 iptables wtools busybox \
-	openwrt-rootprep
-
-.PHONY: $(OPENWRT_TARGETS) openwrt-code.bin
-
-openwrt-base: $(OPENWRT_TARGETS)
-
-######################################################################
-
-WRT54G_SOURCE=wrt54gs.2.07.1.tgz
-WRT54G_SITE=http://www.linksys.com/support/opensourcecode/wrt54gs/2.07.1
-WRT54G_DIR=$(BUILD_DIR)/WRT54GS
-
-LINUX_DIR=$(WRT54G_DIR)/release/src/linux/linux
-LINUX_FORMAT=zImage
-LINUX_BINLOC=arch/mips/brcm-boards/bcm947xx/compressed/vmlinuz
-
-TARGET_MODULES_DIR:=$(TARGET_DIR)/lib/modules/2.4.20
-
-$(LINUX_DIR)/.unpacked: $(WRT54G_DIR)/.prepared
-	-(cd $(BUILD_DIR); ln -sf $(LINUX_DIR) linux)
-	touch $(LINUX_DIR)/.unpacked
-
-$(LINUX_DIR)/.patched: $(WRT54G_DIR)/.prepared
-	$(SOURCE_DIR)/patch-kernel.sh $(LINUX_DIR) $(SOURCE_DIR)/openwrt/kernel/patches
-	# use replacement diag module code
-	cp -f $(SOURCE_DIR)/openwrt/kernel/diag.c $(LINUX_DIR)/drivers/net/diag/diag_led.c
-	cp -f $(SOURCE_DIR)/openwrt/kernel/linux.config $(LINUX_DIR)/.config
-	-(cd $(BUILD_DIR); ln -sf $(LINUX_DIR) linux)
-	-(cd $(LINUX_DIR)/arch/mips/brcm-boards/bcm947xx/; \
-	rm -rf compressed; \
-	tar jxvf $(SOURCE_DIR)/openwrt/kernel/compressed-20040531.tar.bz2; \
-	)
-	touch $(LINUX_DIR)/.patched
-
-$(LINUX_DIR)/.configured: $(LINUX_DIR)/.nf-patched $(LINUX_DIR)/.patched $(LINUX_DIR)/.bbc-patched
-	$(SED) "s,^CROSS_COMPILE.*,CROSS_COMPILE=$(KERNEL_CROSS),g;" $(LINUX_DIR)/Makefile
-	$(SED) "s,^CROSS_COMPILE.*,CROSS_COMPILE=$(KERNEL_CROSS),g;" $(LINUX_DIR)/arch/mips/Makefile
-	$(SED) "s,\-mcpu=,\-mtune=,g;" $(LINUX_DIR)/arch/mips/Makefile
-	make -C $(LINUX_DIR) oldconfig include/linux/version.h
-	touch $(LINUX_DIR)/.configured
-
-$(LINUX_DIR)/.depend_done:  $(LINUX_DIR)/.configured $(GCC_BUILD_DIR2)/.installed
-	$(MAKE) -C $(LINUX_DIR) dep
-	touch $(LINUX_DIR)/.depend_done
-
-$(LINUX_DIR)/$(LINUX_BINLOC): $(LINUX_DIR)/.depend_done
-	$(MAKE) -C $(LINUX_DIR) $(LINUX_FORMAT)
-
-openwrt-kmodules.tar.bz2: $(LINUX_DIR)/$(LINUX_BINLOC)
-	$(MAKE) -C $(LINUX_DIR) modules
-	$(MAKE) -C $(LINUX_DIR) DEPMOD=true \
-		INSTALL_MOD_PATH=$(LINUX_DIR)/modules modules_install
-	tar -C $(LINUX_DIR)/modules/lib -cjf openwrt-kmodules.tar.bz2 modules
-
-openwrt-linux: $(LINUX_DIR)/$(LINUX_BINLOC)
-
-$(DL_DIR)/$(WRT54G_SOURCE):
-	$(WGET) -P $(DL_DIR) $(WRT54G_SITE)/$(WRT54G_SOURCE)
-
-$(WRT54G_DIR)/.source: $(DL_DIR)/$(WRT54G_SOURCE)
-	zcat $(DL_DIR)/$(WRT54G_SOURCE) | tar -C $(BUILD_DIR) -xvf - WRT54GS/README.TXT WRT54GS/release
-	touch $(WRT54G_DIR)/.source
-
-$(WRT54G_DIR)/.prepared: $(WRT54G_DIR)/.source
-	$(SOURCE_DIR)/patch-kernel.sh $(WRT54G_DIR) $(SOURCE_DIR)/openwrt/patches
-	touch $(WRT54G_DIR)/.prepared
-
-######################################################################
-
-OPENWRT_ROOT_SKEL:=root.tar.gz
-OPENWRT_SITE=http://openwrt.ksilebo.net/cgi-bin/viewcvs.cgi/root
-
-$(DL_DIR)/$(OPENWRT_ROOT_SKEL):
-	$(WGET) -P $(DL_DIR) $(OPENWRT_SITE)/$(OPENWRT_ROOT_SKEL)
-
-######################################################################
-
-OPENWRT_SRCBASE:=$(WRT54G_DIR)/release/src
-OPENWRT_SHARED_BUILD_DIR:=$(OPENWRT_SRCBASE)/router/shared
-OPENWRT_SHARED_TARGET_BINARY:=usr/lib/libshared.so
-
-$(TARGET_DIR)/$(OPENWRT_SHARED_TARGET_BINARY): $(WRT54G_DIR)/.source
-	$(MAKE) -C $(OPENWRT_SHARED_BUILD_DIR) -f Makefile-openwrt \
-		SRCBASE=$(OPENWRT_SRCBASE) INSTALLDIR=$(TARGET_DIR) \
-		CC=$(TARGET_CC) LD=$(TARGET_CROSS)ld STRIP="$(STRIP)" \
-		CFLAGS="$(TARGET_CFLAGS) -I. -I$(OPENWRT_SRCBASE)/include -Wall -I$(OPENWRT_SRCBASE)/" \
-		install
-
-openwrt-shared: $(TARGET_DIR)/$(OPENWRT_SHARED_TARGET_BINARY)
-
-openwrt-shared-clean:
-	-$(MAKE) -C $(OPENWRT_SHARED_BUILD_DIR) clean
-
-######################################################################
-
-OPENWRT_NVRAM_BUILD_DIR:=$(OPENWRT_SRCBASE)/router/nvram
-OPENWRT_NVRAM_TARGET_BINARY:=usr/sbin/nvram
-
-$(TARGET_DIR)/$(OPENWRT_NVRAM_TARGET_BINARY): $(WRT54G_DIR)/.source
-	$(MAKE) -C $(OPENWRT_NVRAM_BUILD_DIR) \
-		SRCBASE=$(OPENWRT_SRCBASE) INSTALLDIR=$(TARGET_DIR) \
-		CC=$(TARGET_CC) LD=$(TARGET_CROSS)ld STRIP="$(STRIP)" \
-		CFLAGS="$(TARGET_CFLAGS) -I. -I$(OPENWRT_SRCBASE)/include -Wall -DOPENWRT_NVRAM" \
-		install
-
-
-openwrt-nvram: $(TARGET_DIR)/$(OPENWRT_NVRAM_TARGET_BINARY)
-
-openwrt-nvram-clean:
-	-$(MAKE) -C $(OPENWRT_NVRAM_BUILD_DIR) clean
-
-######################################################################
-
-OPENWRT_MTD_BUILD_DIR:=$(OPENWRT_SRCBASE)/router/rc
-OPENWRT_MTD_TARGET_BINARY:=sbin/mtd
-
-$(TARGET_DIR)/$(OPENWRT_MTD_TARGET_BINARY): $(WRT54G_DIR)/.source $(TARGET_DIR)/$(OPENWRT_NVRAM_TARGET_BINARY) # need libnvram
-	$(MAKE) -C $(OPENWRT_MTD_BUILD_DIR) -f Makefile-openwrt \
-		TOP=$(OPENWRT_SRCBASE)/router \
-		SRCBASE=$(OPENWRT_SRCBASE) INSTALLDIR=$(TARGET_DIR) \
-		CC=$(TARGET_CC) LD=$(TARGET_CROSS)ld STRIP="$(STRIP)" \
-		CFLAGS="$(TARGET_CFLAGS) -I. -I$(OPENWRT_SRCBASE)/router/shared -I$(OPENWRT_SRCBASE)/include -Wall -I$(OPENWRT_SRCBASE)/" \
-		install
-
-openwrt-mtd: $(TARGET_DIR)/$(OPENWRT_MTD_TARGET_BINARY)
-
-openwrt-mtd-clean:
-	-$(MAKE) -C $(OPENWRT_MTD_BUILD_DIR) clean
-
-######################################################################
-
-OPENWRT_WLCONF_BUILD_DIR:=$(OPENWRT_SRCBASE)/router/wlconf
-OPENWRT_WLCONF_TARGET_BINARY:=usr/sbin/wlconf
-
-$(TARGET_DIR)/$(OPENWRT_WLCONF_TARGET_BINARY): $(WRT54G_DIR)/.source
-	$(MAKE) -C $(OPENWRT_WLCONF_BUILD_DIR) \
-		TOP=$(OPENWRT_SRCBASE)/router \
-		SRCBASE=$(OPENWRT_SRCBASE) INSTALLDIR=$(TARGET_DIR) \
-		CC=$(TARGET_CC) LD=$(TARGET_CROSS)ld STRIP="$(STRIP)" \
-		CFLAGS="$(TARGET_CFLAGS) -I. -I$(OPENWRT_SRCBASE)/router/shared -I$(OPENWRT_SRCBASE)/include -Wall" \
-		install
-
-
-openwrt-wlconf: $(TARGET_DIR)/$(OPENWRT_WLCONF_TARGET_BINARY)
-
-openwrt-wlconf-clean:
-	-$(MAKE) -C $(OPENWRT_WLCONF_BUILD_DIR) clean
-
-######################################################################
-
-openwrt-rootprep:
-	# tmp
-	mkdir -p $(TARGET_DIR)/tmp
-	chmod a+rwxt $(TARGET_DIR)/tmp
-	ln -sf /tmp $(TARGET_DIR)/var
-	rm -f $(TARGET_DIR)/usr/tmp
-	ln -sf ../tmp $(TARGET_DIR)/usr/tmp
-	# dev
-	mkdir -p $(TARGET_DIR)/dev
-	# etc
-	mkdir -p $(TARGET_DIR)/etc
-	ln -sf /tmp/resolv.conf $(TARGET_DIR)/etc/resolv.conf
-	# miscellaneous
-	mkdir -p $(TARGET_DIR)/mnt
-	mkdir -p $(TARGET_DIR)/proc
-	mkdir -p $(TARGET_DIR)/jffs
-	mkdir -p $(TARGET_DIR)/rom
-	# modules
-	mkdir -p $(TARGET_MODULES_DIR)
-	cp $(LINUX_DIR)/drivers/net/wl/wl.o $(TARGET_MODULES_DIR)
-	#cp $(LINUX_DIR)/drivers/net/et.4702/et.4702.o $(TARGET_MODULES_DIR)
-	cp $(LINUX_DIR)/drivers/net/et/et.o $(TARGET_MODULES_DIR)
-	cp $(LINUX_DIR)/drivers/net/diag/diag.o $(TARGET_MODULES_DIR)
-
-######################################################################
-
-openwrt-prune: openwrt-base
-	# remove unneeded uClibc libs
-	rm -rf $(TARGET_DIR)/lib/libthread_db*
-	rm -rf $(TARGET_DIR)/lib/libpthread*
-	# remove unneeded uClibc utils
-	rm -f $(TARGET_DIR)/sbin/ldconfig
-	rm -f $(TARGET_DIR)/usr/bin/ldd
-	# remove other unneeded files
-	rm -f $(TARGET_DIR)/usr/sbin/iptables-save
-	rm -f $(TARGET_DIR)/usr/sbin/iptables-restore
-	rm -f $(TARGET_DIR)/usr/sbin/ip6tables
-	rm -f $(TARGET_DIR)/usr/lib/iptables/libip6*
-	-@find $(TARGET_DIR) -type f -perm +111 | xargs $(STAGING_DIR)/bin/sstrip 2>/dev/null || true;
-
-######################################################################
-
-$(STAGING_DIR)/bin/sstrip:
-	$(CC) -o $(STAGING_DIR)/bin/sstrip $(SOURCE_DIR)/openwrt/tools/sstrip.c
-
-wrt-tools:
-	$(CC) -o $(WRT54G_DIR)/release/tools/trx $(SOURCE_DIR)/openwrt/tools/trx.c
-	$(CC) -o $(WRT54G_DIR)/release/tools/addpattern $(SOURCE_DIR)/openwrt/tools/addpattern.c
-
-openwrt-linux.trx:  openwrt-prune squashfsroot wrt-tools
-	$(WRT54G_DIR)/release/tools/trx -o openwrt-linux.trx \
-		$(LINUX_DIR)/$(LINUX_BINLOC) $(IMAGE)
-
-openwrt-gs-code.bin: openwrt-linux.trx
-	$(WRT54G_DIR)/release/tools/addpattern -i openwrt-linux.trx \
-		-o openwrt-gs-code.bin -g
-
-openwrt-g-code.bin: openwrt-gs-code.bin
-	sed -e "1s,^W54S,W54G," < openwrt-gs-code.bin > openwrt-g-code.bin
-
-openwrt-code.bin: openwrt-gs-code.bin openwrt-g-code.bin
-
-######################################################################