Major cleanup :

- no more Broadcom kerSys* code
- working runtime boot loader detection
- updated flash map driver


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@6896 3c298f89-4303-0410-b956-a3cf2f4a3e73

46 files changed, 2854 insertions, 4979 deletions

diff --git a/target/linux/brcm63xx-2.6/config/default b/target/linux/brcm63xx-2.6/config/default
index 1d80fda4b..491d4e057 100644
--- a/target/linux/brcm63xx-2.6/config/default
+++ b/target/linux/brcm63xx-2.6/config/default
@@ -1,41 +1,12 @@
 CONFIG_32BIT=y
 # CONFIG_64BIT is not set
 # CONFIG_64BIT_PHYS_ADDR is not set
+# CONFIG_8139TOO is not set
 CONFIG_AUDIT=y
 CONFIG_AUDIT_GENERIC=y
+# CONFIG_B44 is not set
 CONFIG_BASE_SMALL=0
-# CONFIG_BCM96338 is not set
-# CONFIG_BCM96345 is not set
-CONFIG_BCM96348=y
 CONFIG_BCM963XX=y
-# CONFIG_BCM_ADSL is not set
-CONFIG_BCM_ADSL_IMPL=1
-# CONFIG_BCM_ATMAPI is not set
-CONFIG_BCM_ATMAPI_IMPL=1
-# CONFIG_BCM_ATMTEST is not set
-CONFIG_BCM_ATMTEST_IMPL=1
-CONFIG_BCM_BLAA_IMPL=1
-# CONFIG_BCM_BOARD is not set
-CONFIG_BCM_BOARD_IMPL=1
-# CONFIG_BCM_ENDPOINT is not set
-CONFIG_BCM_ENDPOINT_IMPL=1
-# CONFIG_BCM_ENET is not set
-CONFIG_BCM_ENET_IMPL=1
-# CONFIG_BCM_HPNA is not set
-CONFIG_BCM_HPNA_IMPL=0
-CONFIG_BCM_PCI=y
-CONFIG_BCM_PROCFS=y
-CONFIG_BCM_PROCFS_IMPL=1
-# CONFIG_BCM_SECURITY is not set
-CONFIG_BCM_SECURITY_IMPL=1
-CONFIG_BCM_SERIAL=y
-CONFIG_BCM_SERIAL_IMPL=1
-# CONFIG_BCM_USB is not set
-CONFIG_BCM_USB_IMPL=1
-# CONFIG_BCM_VDSL is not set
-CONFIG_BCM_VDSL_IMPL=1
-# CONFIG_BCM_WLAN is not set
-CONFIG_BCM_WLAN_IMPL=1
 CONFIG_BINFMT_MISC=m
 # CONFIG_BLK_DEV_INITRD is not set
 CONFIG_BLK_DEV_IO_TRACE=y
@@ -43,9 +14,7 @@ CONFIG_BLK_DEV_IO_TRACE=y
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BSD_DISKLABEL is not set
 CONFIG_BSD_PROCESS_ACCT_V3=y
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIBPA10X is not set
+CONFIG_CFE=y
 CONFIG_CICADA_PHY=m
 # CONFIG_CIFS is not set
 # CONFIG_CLS_U32_MARK is not set
@@ -140,6 +109,7 @@ CONFIG_EQUALIZER=m
 CONFIG_FIRMWARE_EDID=y
 # CONFIG_FIXED_PHY is not set
 CONFIG_FORCED_INLINING=y
+CONFIG_FS_POSIX_ACL=y
 CONFIG_FW_LOADER=m
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_GEN_RTC is not set
@@ -181,8 +151,6 @@ CONFIG_IOSCHED_CFQ=y
 CONFIG_IPV6_PRIVACY=y
 CONFIG_IPV6_ROUTE_INFO=y
 CONFIG_IPV6_TUNNEL=m
-CONFIG_IPW2100_DEBUG=y
-CONFIG_IPW2200_DEBUG=y
 # CONFIG_IP_DCCP_DEBUG is not set
 CONFIG_IP_MROUTE=y
 # CONFIG_IP_NF_ARPTABLES is not set
@@ -215,6 +183,7 @@ CONFIG_KEYBOARD_ATKBD=m
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KGDB is not set
 CONFIG_KMOD=y
+# CONFIG_LAN_SAA9730 is not set
 CONFIG_LBD=y
 # CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
 # CONFIG_LLC2 is not set
@@ -273,20 +242,20 @@ CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_BE_BYTE_SWAP=y
 # CONFIG_MTD_CFI_GEOMETRY is not set
 CONFIG_MTD_CFI_I1=y
 CONFIG_MTD_CFI_I2=y
 # CONFIG_MTD_CFI_I4 is not set
 # CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_INTELEXT=y
 # CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_STAA is not set
+# CONFIG_MTD_CFI_NOSWAP is not set
+CONFIG_MTD_CFI_STAA=y
 CONFIG_MTD_CFI_UTIL=y
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_COMPLEX_MAPPINGS=y
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_CONCAT=y
 # CONFIG_MTD_CSTM_MIPS_IXX is not set
 CONFIG_MTD_DEBUG=y
@@ -303,12 +272,10 @@ CONFIG_MTD_MAP_BANK_WIDTH_2=y
 CONFIG_MTD_MAP_BANK_WIDTH_4=y
 # CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
 # CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_NAND is not set
-CONFIG_MTD_OBSOLETE_CHIPS=y
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
 # CONFIG_MTD_ONENAND is not set
 # CONFIG_MTD_OTP is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_PCI is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_PHYSMAP is not set
 # CONFIG_MTD_PLATRAM is not set
@@ -319,8 +286,9 @@ CONFIG_MTD_REDBOOT_PARTS=y
 CONFIG_MTD_REDBOOT_PARTS_READONLY=y
 CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
 # CONFIG_MTD_ROM is not set
-# CONFIG_MTD_SHARP is not set
 # CONFIG_MTD_SLRAM is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
 CONFIG_NETFILTER_NETLINK=m
 CONFIG_NETFILTER_NETLINK_LOG=m
 CONFIG_NETFILTER_NETLINK_QUEUE=m
@@ -330,7 +298,6 @@ CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
 # CONFIG_NET_ACT_IPT is not set
 CONFIG_NET_ACT_SIMP=m
 CONFIG_NET_KEY=y
-# CONFIG_NET_PCI is not set
 CONFIG_NET_SCH_CLK_GETTIMEOFDAY=y
 # CONFIG_NET_SCH_CLK_JIFFIES is not set
 # CONFIG_NET_VENDOR_3COM is not set
@@ -342,7 +309,7 @@ CONFIG_NLS_ASCII=m
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_64KB is not set
 # CONFIG_PAGE_SIZE_8KB is not set
-CONFIG_PCI_DEBUG=y
+# CONFIG_PCI_DEBUG is not set
 CONFIG_PHYLIB=m
 # CONFIG_PMC_YOSEMITE is not set
 # CONFIG_PNX8550_JBS is not set
@@ -415,68 +382,11 @@ CONFIG_TIPC=m
 # CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_TRAD_SIGNALS=y
 # CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_DEVICEFS is not set
-CONFIG_USB_EHCI_HCD=m
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-CONFIG_USB_EHCI_SPLIT_ISO=y
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_USB_KAWETH is not set
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=m
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_AIRPRIME is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
-# CONFIG_USB_SERIAL_CP2101 is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
-# CONFIG_USB_SERIAL_FUNSOFT is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-# CONFIG_USB_SERIAL_GENERIC is not set
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-# CONFIG_USB_SERIAL_MCT_U232 is not set
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-# CONFIG_USB_SERIAL_OPTION is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-# CONFIG_USB_SERIAL_TI is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_EHCI_HCD is not set
 # CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_USB_USBNET_MII is not set
+# CONFIG_VIA_RHINE is not set
 CONFIG_VLAN_8021Q=m
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_WAN_ROUTER=m
 # CONFIG_WATCHDOG is not set
 # CONFIG_XFS_FS is not set
-CONFIG_YENTA_ENE_TUNE=y
-CONFIG_YENTA_O2=y
-CONFIG_YENTA_RICOH=y
-CONFIG_YENTA_TI=y
-CONFIG_YENTA_TOSHIBA=y
diff --git a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/Kconfig b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/Kconfig
deleted file mode 100644
index 1418f4873..000000000
--- a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/Kconfig
+++ /dev/null
@@ -1,138 +0,0 @@
-# Kernel and Driver configuration for Broadcom Commengine ADSL board
-choice
-	prompt "Broadcom Commengine ADSL board"
-	depends on BCM963XX
-	default BCM96348
-	help
-	  Select different Broadcom ADSL board
-
-config BCM96338
-	bool "96338 ADSL board"
-	select DMA_NONCOHERENT
-	select HW_HAS_PCI
-
-config BCM96345
-	bool "96345 ADSL board"
-	select DMA_NONCOHERENT
-	select HW_HAS_PCI
-
-config BCM96348
-	bool "96348 ADSL board"
-	select DMA_NONCOHERENT
-	select HW_HAS_PCI
-
-endchoice
-
-config BCM_BOARD
-	bool "Support for Broadcom Board"
-	depends on BCM96338 || BCM96345 || BCM96348
-
-config BCM_SERIAL
-	bool "Support for Serial Port"
-	depends on BCM96338 || BCM96345 || BCM96348
-
-config BCM_ENET
-	tristate "Support for Ethernet"
-	depends on BCM96338 || BCM96345 || BCM96348
-
-config BCM_USB
-	tristate "Support for USB"
-	depends on BCM96338 || BCM96345 || BCM96348
-
-config BCM_WLAN
-	tristate "Support for Wireless"
-	depends on BCM96338 || BCM96345 || BCM96348
-
-config BCM_PCI
-	bool "Support for PCI"
-	depends on BCM96338 || BCM96345 || BCM96348
-	select PCI
-
-config BCM_ATMAPI
-	tristate "Support for ATM"
-	depends on BCM96338 || BCM96345 || BCM96348
-
-config BCM_ATMTEST
-	tristate "Support for ATM Diagnostic"
-	depends on BCM96338 || BCM96345 || BCM96348
-
-config BCM_ADSL
-	tristate "Support for ADSL"
-	depends on BCM96338 || BCM96345 || BCM96348
-
-config BCM_ENDPOINT
-	tristate "Support for VOICE"
-	depends on BCM96338 || BCM96345 || BCM96348
-
-config BCM_PROCFS
-	tristate "Support for PROCFS"
-	depends on BCM96338 || BCM96345 || BCM96348
-
-config BCM_VDSL
-	tristate "Support for VDSL"
-	depends on BCM96338 || BCM96345 || BCM96348
-
-config BCM_SECURITY
-	tristate "Support for SECURITY"
-	depends on BCM96338 || BCM96345 || BCM96348
-
-config BCM_HPNA
-	tristate "Support for HPNA"
-	depends on BCM96338 || BCM96345 || BCM96348
-
-config BCM_BOARD_IMPL
-	int "Implementation index for ADSL Board"
-	depends on BCM96338 || BCM96345 || BCM96348
-
-config BCM_SERIAL_IMPL
-	int "Implementation index for Serial"
-	depends on BCM96338 || BCM96345 || BCM96348
-
-config BCM_ENET_IMPL
-	int "Implementation index for Ethernet"
-	depends on BCM96338 || BCM96345 || BCM96348
-
-config BCM_USB_IMPL
-	int "Implementation index for USB"
-	depends on BCM96338 || BCM96345 || BCM96348
-
-config BCM_WLAN_IMPL
-	int "Implementation index for WIRELESS"
-	depends on BCM96338 || BCM96345 || BCM96348
-
-config BCM_ATMAPI_IMPL
-	int "Implementation index for ATM"
-	depends on BCM96338 || BCM96345 || BCM96348
-
-config BCM_ATMTEST_IMPL
-	int "Implementation index for ATM Diagnostic"
-	depends on BCM96338 || BCM96345 || BCM96348
-
-config BCM_BLAA_IMPL
-	int "Implementation index for BLAA"
-	depends on BCM96338 || BCM96345 || BCM96348
-
-config BCM_ADSL_IMPL
-	int "Implementation index for ADSL"
-	depends on BCM96338 || BCM96345 || BCM96348
-
-config BCM_ENDPOINT_IMPL
-	int "Implementation index for VOICE"
-	depends on BCM96338 || BCM96345 || BCM96348
-
-config BCM_PROCFS_IMPL
-	int "Implementation index for PROCFS"
-	depends on BCM96338 || BCM96345 || BCM96348
-
-config BCM_VDSL_IMPL
-	int "Implementation index for VDSL"
-	depends on BCM96338 || BCM96345 || BCM96348
-
-config BCM_SECURITY_IMPL
-	int "Implementation index for SECURITY"
-	depends on BCM96338 || BCM96345 || BCM96348
-
-config BCM_HPNA_IMPL
-	int "Implementation index for HPNA"
-	depends on BCM96338 || BCM96345 || BCM96348
-
diff --git a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/Makefile b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/Makefile
index cf524fa64..aa3654ae5 100644
--- a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/Makefile
+++ b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/Makefile
@@ -1,23 +1,9 @@
 #
-# Makefile for generic Broadcom MIPS boards
+# Makefile for the Broadcom BCM963xx SoC specific parts of the kernel
 #
 # Copyright (C) 2004 Broadcom Corporation
 #
-obj-y           := irq.o prom.o setup.o time.o ser_init.o bcm63xx_led.o  board.o  boardparms.o int-handler.o
+obj-y           := irq.o prom.o setup.o time.o ser_init.o int-handler.o info.o
 
 SRCBASE         := $(TOPDIR)
 EXTRA_CFLAGS    += -I$(SRCBASE)/include
-#EXTRA_CFLAGS    += -I$(INC_ADSLDRV_PATH) -DDBG
-EXTRA_CFLAGS    += -I$(INC_ADSLDRV_PATH) 
-
-
-ifeq "$(ADSL)" "ANNEX_B"
-EXTRA_CFLAGS += -DADSL_ANNEXB
-endif
-ifeq "$(ADSL)" "SADSL"
-EXTRA_CFLAGS += -DADSL_SADSL
-endif
-ifeq "$(ADSL)" "ANNEX_C"
-EXTRA_CFLAGS += -DADSL_ANNEXC
-endif
-
diff --git a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/bcm63xx_led.c b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/bcm63xx_led.c
deleted file mode 100644
index 8de0f91db..000000000
--- a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/bcm63xx_led.c
+++ /dev/null
@@ -1,582 +0,0 @@
-/*
-<:copyright-gpl 
- Copyright 2002 Broadcom Corp. All Rights Reserved. 
- 
- This program is free software; you can distribute it and/or modify it 
- under the terms of the GNU General Public License (Version 2) as 
- published by the Free Software Foundation. 
- 
- This program is distributed in the hope it will be useful, but WITHOUT 
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 
- FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License 
- for more details. 
- 
- You should have received a copy of the GNU General Public License along 
- with this program; if not, write to the Free Software Foundation, Inc., 
- 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. 
-:>
-*/
-/***************************************************************************
- * File Name  : bcm63xx_led.c
- *
- * Description: 
- *
- *    This file contains bcm963xx board led control API functions. 
- *
- *    To use it, do the following
- *
- *    1). define in the board.c the following led mappping (this is for 6345GW board):
- *        const LED_MAP_PAIR cLedMapping45GW[] =
- *        {   // led name     Initial state       physical pin (ledMask)
- *            {kLedUsb,       kLedStateOff,       GPIO_LED_PIN_7}, 
- *            {kLedAdsl,      kLedStateOff,       GPIO_LED_PIN_8},
- *            {kLedPPP,       kLedStateOff,       GPIO_LED_PIN_9},    // PPP and WanData share PIN_9
- *            {kLedWanData,   kLedStateOff,       GPIO_LED_PIN_9},
- *            {kLedWireless,  kLedStateOff,       GPIO_LED_PIN_10},
- *            {kLedEnd,       kLedStateOff,       0              } // NOTE: kLedEnd has to be at the end.
- *
- *    2). };To initialize led API and initial state of the leds, call the following function with the mapping 
- *        pointer from the above struct
- *
- *        boardLedInit((PLED_MAP_PAIR) &cLedMapping45R);
- *
- *    3). Sample call for kernel mode:
- *
- *        kerSysLedCtrl(kLedAdsl, kLedStateBlinkOnce);        // kLedxxx defines in board.h
- *
- *    4). Sample call for user mode
- *
- *        sysLedCtrl(kLedAdsl, kLedStateBlinkOnce);           // kLedxxx defines in board_api.h
- *
- *
- * Created on :  10/28/2002  seanl
- *
- ***************************************************************************/
-
-/* Includes. */
-#include <linux/init.h>
-#include <linux/fs.h>
-#include <linux/capability.h>
-#include <linux/slab.h>
-#include <linux/errno.h>
-#include <linux/module.h>
-#include <linux/netdevice.h>
-#include <asm/uaccess.h>
-
-#include <bcm_map_part.h>
-#include <board.h>
-
-#define k100ms              (HZ / 10)     // ~100 ms
-#define kFastBlinkCount     0             // ~100ms
-#define kSlowBlinkCount     5             // ~600ms
-
-#define MAX_VIRT_LEDS       12
-
-// uncomment // for debug led
-//#define DEBUG_LED
-
-// global variables:
-struct timer_list gLedTimer;
-int gTimerOn = FALSE;
-int gLedCount = 0;
-
-typedef struct ledinfo
-{
-    unsigned short ledMask;         // mask for led: ie. giop 10 = 0x0400
-    unsigned short ledActiveLow;    // GPIO bit reset to turn on LED
-    unsigned short ledMaskFail;     // mask for led: ie. giop 10 = 0x0400
-    unsigned short ledActiveLowFail;// GPIO bit reset to turn on LED
-    BOARD_LED_STATE ledState;       // current led state
-    BOARD_LED_STATE savedLedState;  // used in blink once for restore to the orignal ledState
-    int blinkCountDown;             // if == 0, do blink (toggle).  Is assgined value and dec by 1 at each timer.
-} LED_INFO, *PLED_INFO;
-
-static PLED_INFO gLed = NULL;
-static PLED_INFO gpVirtLeds[MAX_VIRT_LEDS];
-static HANDLE_LED_FUNC gLedHwFunc[MAX_VIRT_LEDS];
-static HANDLE_LED_FUNC gLedHwFailFunc[MAX_VIRT_LEDS];
-
-#if 0 /* BROKEN */
-#if defined(CONFIG_BCM96348) || defined(CONFIG_BCM96338)
-static int gLedOffInBridgeMode = 1;
-#elif defined(CONFIG_BCM96345)
-static int gLedOffInBridgeMode = 0;
-#endif
-#endif
-
-void ledTimerExpire(void);
-int initLedInfo( PLED_MAP_PAIR pCurMap, PLED_INFO pCurLed );
-
-//**************************************************************************************
-// LED operations
-//**************************************************************************************
-
-// turn led on and set the ledState
-void ledOn(PLED_INFO pLed)
-{
-    if( pLed->ledMask )
-    {
-        GPIO->GPIODir |= pLed->ledMask;         // turn on the direction bit in case was turned off by some one
-        if( pLed->ledActiveLow )
-            GPIO->GPIOio  &= ~pLed->ledMask;    // turn on the led
-        else
-            GPIO->GPIOio  |= pLed->ledMask;     // turn on the led
-        pLed->ledState = pLed->savedLedState = kLedStateOn;
-    }
-}
-
-
-// turn led off and set the ledState
-void ledOff(PLED_INFO pLed)
-{
-    if( pLed->ledMask )
-    {
-        GPIO->GPIODir |= pLed->ledMask;         // turn on the direction bit in case was turned off by some one
-        if( pLed->ledActiveLow )
-            GPIO->GPIOio  |= pLed->ledMask;     // turn off the led
-        else
-            GPIO->GPIOio  &= ~pLed->ledMask;    // turn off the led
-        pLed->ledState = pLed->savedLedState = kLedStateOff;
-    }
-}
-
-// turn led on and set the ledState
-void ledOnFail(PLED_INFO pLed)
-{
-    if( pLed->ledMaskFail )
-    {
-        GPIO->GPIODir |= pLed->ledMaskFail;     // turn on the direction bit in case was turned off by some one
-        if( pLed->ledActiveLowFail )
-            GPIO->GPIOio  &= ~pLed->ledMaskFail;// turn on the led
-        else
-            GPIO->GPIOio  |= pLed->ledMaskFail; // turn on the led
-        pLed->ledState = pLed->savedLedState = kLedStateFail;
-    }
-}
-
-
-// turn led off and set the ledState
-void ledOffFail(PLED_INFO pLed)
-{
-    if( pLed->ledMaskFail )
-    {
-        GPIO->GPIODir |= pLed->ledMaskFail;     // turn on the direction bit in case was turned off by some one
-        if( pLed->ledActiveLowFail )
-            GPIO->GPIOio  |= pLed->ledMaskFail; // turn off the led
-        else
-            GPIO->GPIOio  &= ~pLed->ledMaskFail;// turn off the led
-        pLed->ledState = pLed->savedLedState = kLedStateOff;
-    }
-}
-
-
-// toggle the led and return the current ledState
-BOARD_LED_STATE ledToggle(PLED_INFO pLed)
-{
-    GPIO->GPIODir |= pLed->ledMask;         // turn on the direction bit in case was turned off by some one
-    if (GPIO->GPIOio & pLed->ledMask)
-    {
-        GPIO->GPIOio &= ~(pLed->ledMask);
-        return( (pLed->ledActiveLow) ? kLedStateOn : kLedStateOff );
-    }
-    else
-    {
-        GPIO->GPIOio |= pLed->ledMask;
-        return( (pLed->ledActiveLow) ? kLedStateOff : kLedStateOn );
-    }
-}   
-
-
-// led timer.  Will return if timer is already on
-void ledTimerStart(void)
-{
-    if (gTimerOn)
-        return;
-
-#if defined(DEBUG_LED)
-    printk("led: add_timer\n");
-#endif
-
-    init_timer(&gLedTimer);
-    gLedTimer.function = (void*)ledTimerExpire;
-    gLedTimer.expires = jiffies + k100ms;        // timer expires in ~100ms
-    add_timer (&gLedTimer);
-    gTimerOn = TRUE;
-} 
-
-
-// led timer expire kicks in about ~100ms and perform the led operation according to the ledState and
-// restart the timer according to ledState
-void ledTimerExpire(void)
-{
-    int i;
-    PLED_INFO pCurLed;
-
-    gTimerOn = FALSE;
-
-    for (i = 0, pCurLed = gLed; i < gLedCount; i++, pCurLed++)
-    {
-#if defined(DEBUG_LED)
-        printk("led[%d]: Mask=0x%04x, State = %d, blcd=%d\n", i, pCurLed->ledMask, pCurLed->ledState, pCurLed->blinkCountDown);
-#endif
-        switch (pCurLed->ledState)
-        {
-            case kLedStateOn:
-            case kLedStateOff:
-            case kLedStateFail:
-                pCurLed->blinkCountDown = 0;            // reset the blink count down
-                break;
-
-            case kLedStateBlinkOnce:
-                ledToggle(pCurLed);
-                pCurLed->blinkCountDown = 0;                      // reset to 0
-                pCurLed->ledState = pCurLed->savedLedState;
-                if (pCurLed->ledState == kLedStateSlowBlinkContinues || 
-                    pCurLed->ledState == kLedStateFastBlinkContinues)
-                    ledTimerStart();                  // start timer if in blinkContinues stats
-                break;
-
-            case kLedStateSlowBlinkContinues:
-                if (pCurLed->blinkCountDown-- == 0)
-                {
-                    pCurLed->blinkCountDown = kSlowBlinkCount;
-                    ledToggle(pCurLed);
-                }
-                ledTimerStart();
-                break;
-
-            case kLedStateFastBlinkContinues:
-                if (pCurLed->blinkCountDown-- == 0)
-                {
-                    pCurLed->blinkCountDown = kFastBlinkCount;
-                    ledToggle(pCurLed);
-                }
-                ledTimerStart();
-                break;
-
-            default:
-                printk("Invalid state = %d\n", pCurLed->ledState);
-        }
-    }
-}
-
-// initialize the gLedCount and allocate and fill gLed struct
-void __init boardLedInit(PLED_MAP_PAIR cLedMapping)
-{
-    PLED_MAP_PAIR p1, p2;
-    PLED_INFO pCurLed;
-    int needTimer = FALSE;
-    int alreadyUsed = 0;
-
-#if defined(CONFIG_BCM96348) || defined(CONFIG_BCM96338)
-    /* Set blink rate for BCM6348/BCM6338 hardware LEDs. */
-    GPIO->LEDCtrl &= ~LED_INTERVAL_SET_MASK;
-    GPIO->LEDCtrl |= LED_INTERVAL_SET_80MS;
-#endif
-
-    memset( gpVirtLeds, 0x00, sizeof(gpVirtLeds) );
-    memset( gLedHwFunc, 0x00, sizeof(gLedHwFunc) );
-    memset( gLedHwFailFunc, 0x00, sizeof(gLedHwFailFunc) );
-
-    gLedCount = 0;
-
-    // Check for multiple LED names and multiple LED GPIO pins that share the
-    // same physical board LED.
-    for( p1 = cLedMapping; p1->ledName != kLedEnd; p1++ )
-    {
-        alreadyUsed = 0;
-        for( p2 = cLedMapping; p2 != p1; p2++ )
-        {
-            if( (p1->ledMask && p1->ledMask == p2->ledMask) ||
-                (p1->ledMaskFail && p1->ledMaskFail == p2->ledMaskFail) )
-            {
-                alreadyUsed = 1;
-                break;
-            }
-        }
-
-        if( alreadyUsed == 0  )
-            gLedCount++;
-    }
-
-    gLed = (PLED_INFO) kmalloc((gLedCount * sizeof(LED_INFO)), GFP_KERNEL);
-    if( gLed == NULL )
-    {
-        printk( "LED memory allocation error.\n" );
-        return;
-    }
-
-    memset( gLed, 0x00, gLedCount * sizeof(LED_INFO) );
-
-    // initial the gLed with unique ledMask and initial state. If more than 1 ledNames share the physical led 
-    // (ledMask) the first defined led's ledInitState will be used.
-    pCurLed = gLed;
-    for( p1 = cLedMapping; p1->ledName != kLedEnd; p1++ )
-    {
-        if( (int) p1->ledName > MAX_VIRT_LEDS )
-            continue;
-
-        alreadyUsed = 0;
-        for( p2 = cLedMapping; p2 != p1; p2++ )
-        {
-            if( (p1->ledMask && p1->ledMask == p2->ledMask) ||
-                (p1->ledMaskFail && p1->ledMaskFail == p2->ledMaskFail) )
-            {
-                alreadyUsed = 1;
-                break;
-            }
-        }
-
-        if( alreadyUsed == 0 )
-        {
-            // Initialize the board LED for the first time.
-            needTimer = initLedInfo( p1, pCurLed );
-            gpVirtLeds[(int) p1->ledName] = pCurLed;
-            pCurLed++;
-        }
-        else
-        {
-            PLED_INFO pLed;
-            for( pLed = gLed; pLed != pCurLed; pLed++ )
-            {
-                // Find the LED_INFO structure that has already been initialized.
-                if((pLed->ledMask && pLed->ledMask == p1->ledMask) ||
-                   (pLed->ledMaskFail && pLed->ledMaskFail==p1->ledMaskFail))
-                {
-                    // The board LED has already been initialized but possibly
-                    // not completely initialized.
-                    if( p1->ledMask )
-                    {
-                        pLed->ledMask = p1->ledMask;
-                        pLed->ledActiveLow = p1->ledActiveLow;
-                    }
-                    if( p1->ledMaskFail )
-                    {
-                        pLed->ledMaskFail = p1->ledMaskFail;
-                        pLed->ledActiveLowFail = p1->ledActiveLowFail;
-                    }
-                    gpVirtLeds[(int) p1->ledName] = pLed;
-                    break;
-                }
-            }
-        }
-    }
-
-    if (needTimer)
-        ledTimerStart();
-
-#if defined(DEBUG_LED)
-    int i;
-    for (i=0; i < gLedCount; i++)
-        printk("initLed: led[%d]: mask=0x%04x, state=%d\n", i,(gLed+i)->ledMask, (gLed+i)->ledState);
-#endif
-
-}
-
-// Initialize a structure that contains information about a physical board LED
-// control.  The board LED may contain more than one GPIO pin to control a
-// normal condition (green) or a failure condition (red).
-int initLedInfo( PLED_MAP_PAIR pCurMap, PLED_INFO pCurLed )
-{
-    int needTimer = FALSE;
-    pCurLed->ledState = pCurLed->savedLedState = pCurMap->ledInitState;
-    pCurLed->ledMask = pCurMap->ledMask;
-    pCurLed->ledActiveLow = pCurMap->ledActiveLow;
-    pCurLed->ledMaskFail = pCurMap->ledMaskFail;
-    pCurLed->ledActiveLowFail = pCurMap->ledActiveLowFail;
-
-    switch (pCurLed->ledState)
-    {
-        case kLedStateOn:
-            pCurLed->blinkCountDown = 0;            // reset the blink count down
-            ledOn(pCurLed);
-            break;
-        case kLedStateOff:
-            pCurLed->blinkCountDown = 0;            // reset the blink count down
-            ledOff(pCurLed);
-            break;
-        case kLedStateFail:
-            pCurLed->blinkCountDown = 0;            // reset the blink count down
-            ledOnFail(pCurLed);
-            break;
-        case kLedStateBlinkOnce:
-            pCurLed->blinkCountDown = 1;
-            needTimer = TRUE;
-            break;
-        case kLedStateSlowBlinkContinues:
-            pCurLed->blinkCountDown = kSlowBlinkCount;
-            needTimer = TRUE;
-            break;
-        case kLedStateFastBlinkContinues:
-            pCurLed->blinkCountDown = kFastBlinkCount;
-            needTimer = TRUE;
-            break;
-        default:
-            printk("Invalid state = %d\n", pCurLed->ledState);
-    }
-
-    return( needTimer );
-}
-
-#if 0 /* BROKEN */
-// Determines if there is at least one interface in bridge mode.  Bridge mode
-// is determined by the cfm convention of naming bridge interfaces nas17
-// through nas24.
-static int isBridgedProtocol(void)
-{
-    extern int dev_get(const char *name);
-    const int firstBridgeId = 17;
-    const int lastBridgeId = 24;
-    int i;
-    int ret = FALSE;
-    char name[16];
-
-    for( i = firstBridgeId; i <= lastBridgeId; i++ )
-    {
-        sprintf( name, "nas%d", i );
-
-        if( dev_get(name) )
-        {
-            ret = TRUE;
-            break;
-        }
-    }
-
-    return(ret);
-}
-#endif
-
-// led ctrl.  Maps the ledName to the corresponding ledInfoPtr and perform the led operation
-void boardLedCtrl(BOARD_LED_NAME ledName, BOARD_LED_STATE ledState)
-{
-    PLED_INFO ledInfoPtr;
-
-    // do the mapping from virtual to physical led
-    if( (int) ledName < MAX_VIRT_LEDS )
-        ledInfoPtr = gpVirtLeds[(int) ledName];
-    else
-        ledInfoPtr = NULL;
-
-    if (ledInfoPtr == NULL)
-        return;
-
-    if( ledState != kLedStateFail && gLedHwFunc[(int) ledName] )
-    {
-        (*gLedHwFunc[(int) ledName]) (ledName, ledState);
-        ledOffFail(ledInfoPtr);
-        return;
-    }
-    else
-        if( ledState == kLedStateFail && gLedHwFailFunc[(int) ledName] )
-        {
-            (*gLedHwFailFunc[(int) ledName]) (ledName, ledState);
-            ledOff(ledInfoPtr);
-            return;
-        }
-
-#if 0 /* BROKEN */
-    // Do not blink the WAN Data LED if at least one interface is in bridge mode.
-    if(gLedOffInBridgeMode == 1 && (ledName == kLedWanData || ledName == kLedPPP))
-    {
-        static int BridgedProtocol = -1;
-
-        if( BridgedProtocol == -1 )
-            BridgedProtocol = isBridgedProtocol();
-
-        if( BridgedProtocol == TRUE )
-            return;
-    }
-#endif
-
-    // If the state is kLedStateFail and there is not a failure LED defined
-    // in the board parameters, change the state to kLedStateFastBlinkContinues.
-    if( ledState == kLedStateFail && ledInfoPtr->ledMaskFail == 0 )
-        ledState = kLedStateFastBlinkContinues;
-
-    switch (ledState)
-    {
-        case kLedStateOn:
-            // First, turn off the complimentary (failure) LED GPIO.
-            if( ledInfoPtr->ledMaskFail )
-                ledOffFail(ledInfoPtr);
-            else
-                if( gLedHwFailFunc[(int) ledName] )
-                    (*gLedHwFailFunc[(int) ledName]) (ledName, kLedStateOff);
-
-            // Next, turn on the specified LED GPIO.
-            ledOn(ledInfoPtr);
-            break;
-
-        case kLedStateOff: 
-            // First, turn off the complimentary (failure) LED GPIO.
-            if( ledInfoPtr->ledMaskFail )
-                ledOffFail(ledInfoPtr);
-            else
-                if( gLedHwFailFunc[(int) ledName] )
-                    (*gLedHwFailFunc[(int) ledName]) (ledName, kLedStateOff);
-
-            // Next, turn off the specified LED GPIO.
-            ledOff(ledInfoPtr);
-            break;
-
-        case kLedStateFail:
-            // First, turn off the complimentary (normal) LED GPIO.
-            if( ledInfoPtr->ledMask )
-                ledOff(ledInfoPtr);
-            else
-                if( gLedHwFunc[(int) ledName] )
-                    (*gLedHwFunc[(int) ledName]) (ledName, kLedStateOff);
-
-            // Next, turn on (red) the specified LED GPIO.
-            ledOnFail(ledInfoPtr);
-            break;
-
-        case kLedStateBlinkOnce:
-            // skip blinkOnce if it is already in Slow/Fast blink continues state
-            if (ledInfoPtr->savedLedState == kLedStateSlowBlinkContinues ||
-                ledInfoPtr->savedLedState == kLedStateFastBlinkContinues)
-                ;
-            else
-            {
-                if (ledInfoPtr->blinkCountDown == 0)  // skip the call if it is 1
-                {
-                    ledToggle(ledInfoPtr);
-                    ledInfoPtr->blinkCountDown = 1;  // it will be reset to 0 when timer expires
-                    ledInfoPtr->ledState = kLedStateBlinkOnce;
-                    ledTimerStart();
-                }
-            }
-            break;
-
-        case kLedStateSlowBlinkContinues:
-            ledInfoPtr->blinkCountDown = kSlowBlinkCount;
-            ledInfoPtr->ledState = kLedStateSlowBlinkContinues;
-            ledInfoPtr->savedLedState = kLedStateSlowBlinkContinues;
-            ledTimerStart();
-            break;
-
-        case kLedStateFastBlinkContinues:
-            ledInfoPtr->blinkCountDown = kFastBlinkCount;
-            ledInfoPtr->ledState = kLedStateFastBlinkContinues;
-            ledInfoPtr->savedLedState = kLedStateFastBlinkContinues;
-            ledTimerStart();
-            break;
-
-        default:
-            printk("Invalid led state\n");
-    }
-}
-
-// This function is called for an LED that is controlled by hardware.
-void kerSysLedRegisterHwHandler( BOARD_LED_NAME ledName,
-    HANDLE_LED_FUNC ledHwFunc, int ledFailType )
-{
-    if( (int) ledName < MAX_VIRT_LEDS )
-    {
-        if( ledFailType == 1 )
-            gLedHwFailFunc[(int) ledName] = ledHwFunc;
-        else
-            gLedHwFunc[(int) ledName] = ledHwFunc;
-    }
-}
-
diff --git a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/board.c b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/board.c
deleted file mode 100644
index e54b96050..000000000
--- a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/board.c
+++ /dev/null
@@ -1,559 +0,0 @@
-/*
-<:copyright-gpl 
- Copyright 2002 Broadcom Corp. All Rights Reserved. 
- 
- This program is free software; you can distribute it and/or modify it 
- under the terms of the GNU General Public License (Version 2) as 
- published by the Free Software Foundation. 
- 
- This program is distributed in the hope it will be useful, but WITHOUT 
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 
- FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License 
- for more details. 
- 
- You should have received a copy of the GNU General Public License along 
- with this program; if not, write to the Free Software Foundation, Inc., 
- 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. 
-:>
-*/
-
-/* Includes. */
-#include <linux/version.h>
-#include <linux/init.h>
-#include <linux/fs.h>
-#include <linux/interrupt.h>
-#include <linux/capability.h>
-#include <linux/slab.h>
-#include <linux/errno.h>
-#include <linux/module.h>
-#include <linux/pagemap.h>
-#include <asm/uaccess.h>
-#include <linux/wait.h>
-#include <linux/poll.h>
-#include <linux/sched.h>
-#include <linux/list.h>
-#include <linux/if.h>
-#include <linux/spinlock.h>
-
-#include <bcm_map_part.h>
-#include <board.h>
-#include <bcmTag.h>
-#include "boardparms.h"
-#include "bcm_intr.h"
-#include "board.h"
-#include "bcm_map_part.h"
-
-static DEFINE_SPINLOCK(board_lock);
-
-/* Typedefs. */
-#if defined (NON_CONSECUTIVE_MAC)
-// used to be the last octet. Now changed to the first 5 bits of the the forth octet
-// to reduced the duplicated MAC addresses.
-#define CHANGED_OCTET   3
-#define SHIFT_BITS      3
-#else
-#define CHANGED_OCTET   1
-#define SHIFT_BITS      0
-#endif
-
-typedef struct
-{
-    unsigned long ulId;
-    char chInUse;
-    char chReserved[3];
-} MAC_ADDR_INFO, *PMAC_ADDR_INFO;
-
-typedef struct
-{
-    unsigned long ulSdramSize;
-    unsigned long ulPsiSize;
-    unsigned long ulNumMacAddrs;
-    unsigned long ucaBaseMacAddr[NVRAM_MAC_ADDRESS_LEN];
-    MAC_ADDR_INFO MacAddrs[1];
-} NVRAM_INFO, *PNVRAM_INFO;
-
-typedef struct
-{
-    unsigned long eventmask;    
-} BOARD_IOC, *PBOARD_IOC;
-
-
-/*Dyinggasp callback*/
-typedef void (*cb_dgasp_t)(void *arg);
-typedef struct _CB_DGASP__LIST
-{
-    struct list_head list;
-    char name[IFNAMSIZ];
-    cb_dgasp_t cb_dgasp_fn;
-    void *context;
-}CB_DGASP_LIST , *PCB_DGASP_LIST;
-
-
-static LED_MAP_PAIR LedMapping[] =
-{   // led name     Initial state       physical pin (ledMask)
-    {kLedEnd,       kLedStateOff,       0, 0, 0, 0},
-    {kLedEnd,       kLedStateOff,       0, 0, 0, 0},
-    {kLedEnd,       kLedStateOff,       0, 0, 0, 0},
-    {kLedEnd,       kLedStateOff,       0, 0, 0, 0},
-    {kLedEnd,       kLedStateOff,       0, 0, 0, 0},
-    {kLedEnd,       kLedStateOff,       0, 0, 0, 0}, 
-    {kLedEnd,       kLedStateOff,       0, 0, 0, 0}, 
-    {kLedEnd,       kLedStateOff,       0, 0, 0, 0},     
-    {kLedEnd,       kLedStateOff,       0, 0, 0, 0} // NOTE: kLedEnd has to be at the end.
-};
-
-/* Externs. */
-extern struct file fastcall *fget_light(unsigned int fd, int *fput_needed);
-extern unsigned int nr_free_pages (void);
-extern const char *get_system_type(void);
-extern void kerSysFlashInit(void);
-extern unsigned long get_nvram_start_addr(void);
-extern unsigned long get_scratch_pad_start_addr(void);
-extern unsigned long getMemorySize(void);
-extern void __init boardLedInit(PLED_MAP_PAIR);
-extern void boardLedCtrl(BOARD_LED_NAME, BOARD_LED_STATE);
-extern void kerSysLedRegisterHandler( BOARD_LED_NAME ledName,
-    HANDLE_LED_FUNC ledHwFunc, int ledFailType );
-
-/* Prototypes. */
-void __init InitNvramInfo( void );
-
-/* DyingGasp function prototype */
-static void __init kerSysDyingGaspMapIntr(void);
-static irqreturn_t kerSysDyingGaspIsr(int irq, void * dev_id);
-static void __init kerSysInitDyingGaspHandler( void );
-static void __exit kerSysDeinitDyingGaspHandler( void );
-/* -DyingGasp function prototype - */
-
-static PNVRAM_INFO g_pNvramInfo = NULL;
-static int g_ledInitialized = 0;
-static CB_DGASP_LIST *g_cb_dgasp_list_head = NULL;
-
-static int g_wakeup_monitor = 0;
-static struct file *g_monitor_file = NULL;
-static struct task_struct *g_monitor_task = NULL;
-static unsigned int (*g_orig_fop_poll)
-    (struct file *, struct poll_table_struct *) = NULL;
-
-void kerSysMipsSoftReset(void)
-{
-    if (PERF->RevID == 0x634800A1) {
-        typedef void (*FNPTR) (void);
-        FNPTR bootaddr = (FNPTR) FLASH_BASE;
-        int i;
-
-        /* Disable interrupts. */
-        //cli();
-	spin_lock_irq(&board_lock);
-	
-        /* Reset all blocks. */
-        PERF->BlockSoftReset &= ~BSR_ALL_BLOCKS;
-        for( i = 0; i < 1000000; i++ )
-            ;
-        PERF->BlockSoftReset |= BSR_ALL_BLOCKS;
-        /* Jump to the power on address. */
-        (*bootaddr) ();
-    }
-    else
-        PERF->pll_control |= SOFT_RESET;    // soft reset mips
-}
-
-
-int kerSysGetMacAddress( unsigned char *pucaMacAddr, unsigned long ulId )
-{
-    int nRet = 0;
-    PMAC_ADDR_INFO pMai = NULL;
-    PMAC_ADDR_INFO pMaiFreeNoId = NULL;
-    PMAC_ADDR_INFO pMaiFreeId = NULL;
-    unsigned long i = 0, ulIdxNoId = 0, ulIdxId = 0, shiftedIdx = 0;
-
-    /* CMO -- Fix le problème avec les adresses mac que l'on n'arrive pas
-     *  * à relire plusieurs fois */
-    /* inv_xde */
-#if 0
-    if (boot_loader_type == BOOT_CFE)
-      memcpy( pucaMacAddr, g_pNvramInfo->ucaBaseMacAddr,
-              NVRAM_MAC_ADDRESS_LEN );
-    else {
-#endif
-      pucaMacAddr[0] = 0x00;
-      pucaMacAddr[1] = 0x07;
-      pucaMacAddr[2] = 0x3A;
-      pucaMacAddr[3] = 0xFF;
-      pucaMacAddr[4] = 0xFF;
-      pucaMacAddr[5] = 0xFF;
-#if 0
-    }
-#endif
-
-    return nRet;
-} /* kerSysGetMacAddr */
-
-int kerSysReleaseMacAddress( unsigned char *pucaMacAddr )
-{
-    int nRet = -EINVAL;
-    unsigned long ulIdx = 0;
-    int idx = (pucaMacAddr[NVRAM_MAC_ADDRESS_LEN - CHANGED_OCTET] -
-        g_pNvramInfo->ucaBaseMacAddr[NVRAM_MAC_ADDRESS_LEN - CHANGED_OCTET]);
-
-    // if overflow 255 (negitive), add 256 to have the correct index
-    if (idx < 0)
-        idx += 256;
-    ulIdx = (unsigned long) (idx >> SHIFT_BITS);
-
-    if( ulIdx < g_pNvramInfo->ulNumMacAddrs )
-    {
-        PMAC_ADDR_INFO pMai = &g_pNvramInfo->MacAddrs[ulIdx];
-        if( pMai->chInUse == 1 )
-        {
-            pMai->chInUse = 0;
-            nRet = 0;
-        }
-    }
-
-    return( nRet );
-} /* kerSysReleaseMacAddr */
-
-int kerSysGetSdramSize( void )
-{
-  if (boot_loader_type == BOOT_CFE) {
-    return( (int) g_pNvramInfo->ulSdramSize );
-  }
-  else {
-    printk("kerSysGetSdramSize : 0x%08X\n", (int)getMemorySize() + 0x00040000);
-    return((int)getMemorySize() + 0x00040000);
-  }
-} /* kerSysGetSdramSize */
-
-
-void kerSysLedCtrl(BOARD_LED_NAME ledName, BOARD_LED_STATE ledState)
-{
-    if (g_ledInitialized)
-      boardLedCtrl(ledName, ledState);
-}
-
-unsigned int kerSysMonitorPollHook( struct file *f, struct poll_table_struct *t)
-{
-    int mask = (*g_orig_fop_poll) (f, t);
-
-    if( g_wakeup_monitor == 1 && g_monitor_file == f )
-    {
-        /* If g_wakeup_monitor is non-0, the user mode application needs to
-         * return from a blocking select function.  Return POLLPRI which will
-         * cause the select to return with the exception descriptor set.
-         */
-        mask |= POLLPRI;
-        g_wakeup_monitor = 0;
-    }
-
-    return( mask );
-}
-
-/* Put the user mode application that monitors link state on a run queue. */
-void kerSysWakeupMonitorTask( void )
-{
-    g_wakeup_monitor = 1;
-    if( g_monitor_task )
-        wake_up_process( g_monitor_task );
-}
-
-//<<JUNHON, 2004/09/15, get reset button status , tim hou , 05/04/12
-int kerSysGetResetHold(void)
-{
-	unsigned short gpio;
-
-	if( BpGetPressAndHoldResetGpio( &gpio ) == BP_SUCCESS )
-	{
-    unsigned long gpio_mask = GPIO_NUM_TO_MASK(gpio);
-    volatile unsigned long *gpio_reg = &GPIO->GPIOio;
-
-    if( (gpio & ~BP_ACTIVE_MASK) >= 32 )
-    {
-        gpio_mask = GPIO_NUM_TO_MASK_HIGH(gpio);
-        gpio_reg = &GPIO->GPIOio_high;
-    }
-	//printk("gpio=%04x,gpio_mask=%04x,gpio_reg=%04x\n",gpio,gpio_mask,*gpio_reg);
-	if(*gpio_reg & gpio_mask)  //press down
-		return RESET_BUTTON_UP;
-	}
-	return RESET_BUTTON_PRESSDOWN;
-}
-//<<JUNHON, 2004/09/15
-
-/***************************************************************************
- * Dying gasp ISR and functions.
- ***************************************************************************/
-#define KERSYS_DBG	printk
-
-#if defined(CONFIG_BCM96345)
-#define	CYCLE_PER_US	70
-#elif defined(CONFIG_BCM96348) || defined(CONFIG_BCM96338)
-/* The BCM6348 cycles per microsecond is really variable since the BCM6348
- * MIPS speed can vary depending on the PLL settings.  However, an appoximate
- * value of 120 will still work OK for the test being done.
- */
-#define	CYCLE_PER_US	120
-#endif
-#define	DG_GLITCH_TO	(100*CYCLE_PER_US)
- 
-static void __init kerSysDyingGaspMapIntr()
-{
-    unsigned long ulIntr;
-    	
-#if defined(CONFIG_BCM96348) || defined(_BCM96348_) || defined(CONFIG_BCM96338) || defined(_BCM96338_)
-    if( BpGetAdslDyingGaspExtIntr( &ulIntr ) == BP_SUCCESS ) {
-		BcmHalMapInterrupt((FN_HANDLER)kerSysDyingGaspIsr, 0, INTERRUPT_ID_DG);
-		BcmHalInterruptEnable( INTERRUPT_ID_DG );
-    }
-#elif defined(CONFIG_BCM96345) || defined(_BCM96345_)
-    if( BpGetAdslDyingGaspExtIntr( &ulIntr ) == BP_SUCCESS ) {
-        ulIntr += INTERRUPT_ID_EXTERNAL_0;
-        BcmHalMapInterrupt((FN_HANDLER)kerSysDyingGaspIsr, 0, ulIntr);
-        BcmHalInterruptEnable( ulIntr );
-    }
-#endif
-
-} 
-
-void kerSysSetWdTimer(ulong timeUs)
-{
-	TIMER->WatchDogDefCount = timeUs * (FPERIPH/1000000);
-	TIMER->WatchDogCtl = 0xFF00;
-	TIMER->WatchDogCtl = 0x00FF;
-}
-
-ulong kerSysGetCycleCount(void)
-{
-    ulong cnt; 
-#ifdef _WIN32_WCE
-    cnt = 0;
-#else
-    __asm volatile("mfc0 %0, $9":"=d"(cnt));
-#endif
-    return(cnt); 
-}
-
-static Bool kerSysDyingGaspCheckPowerLoss(void)
-{
-    ulong clk0;
-    ulong ulIntr;
-
-    ulIntr = 0;
-    clk0 = kerSysGetCycleCount();
-
-    UART->Data = 'D';
-    UART->Data = '%';
-    UART->Data = 'G';
-
-#if defined(CONFIG_BCM96345)
-    BpGetAdslDyingGaspExtIntr( &ulIntr );
-
-    do {
-        ulong clk1;
-        
-        clk1 = kerSysGetCycleCount();		/* time cleared */
-	/* wait a little to get new reading */
-        while ((kerSysGetCycleCount()-clk1) < CYCLE_PER_US*2)
-            ;
-    } while ((0 == (PERF->ExtIrqCfg & (1 << (ulIntr + EI_STATUS_SHFT)))) && ((kerSysGetCycleCount() - clk0) < DG_GLITCH_TO));
-
-    if (PERF->ExtIrqCfg & (1 << (ulIntr + EI_STATUS_SHFT))) {	/* power glitch */
-        BcmHalInterruptEnable( ulIntr + INTERRUPT_ID_EXTERNAL_0);
-        KERSYS_DBG(" - Power glitch detected. Duration: %ld us\n", (kerSysGetCycleCount() - clk0)/CYCLE_PER_US);
-        return 0;
-    }
-#elif (defined(CONFIG_BCM96348) || defined(CONFIG_BCM96338)) && !defined(VXWORKS)
-    do {
-        ulong clk1;
-        
-        clk1 = kerSysGetCycleCount();		/* time cleared */
-	/* wait a little to get new reading */
-        while ((kerSysGetCycleCount()-clk1) < CYCLE_PER_US*2)
-            ;
-     } while ((PERF->IrqStatus & (1 << (INTERRUPT_ID_DG - INTERNAL_ISR_TABLE_OFFSET))) && ((kerSysGetCycleCount() - clk0) < DG_GLITCH_TO));
-
-    if (!(PERF->IrqStatus & (1 << (INTERRUPT_ID_DG - INTERNAL_ISR_TABLE_OFFSET)))) {
-        BcmHalInterruptEnable( INTERRUPT_ID_DG );
-        KERSYS_DBG(" - Power glitch detected. Duration: %ld us\n", (kerSysGetCycleCount() - clk0)/CYCLE_PER_US);
-        return 0;
-    }
-#endif
-    return 1;
-}
-
-static void kerSysDyingGaspShutdown( void )
-{
-    kerSysSetWdTimer(1000000);
-#if defined(CONFIG_BCM96345)
-    PERF->blkEnables &= ~(EMAC_CLK_EN | USB_CLK_EN | CPU_CLK_EN);
-#elif defined(CONFIG_BCM96348)
-    PERF->blkEnables &= ~(EMAC_CLK_EN | USBS_CLK_EN | USBH_CLK_EN | SAR_CLK_EN);
-#endif
-}
-
-#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0))
-static irqreturn_t kerSysDyingGaspIsr(int irq, void * dev_id)
-#else
-static unsigned int kerSysDyingGaspIsr(void)
-#endif
-{	
-    struct list_head *pos;
-    CB_DGASP_LIST *tmp, *dsl = NULL;	
-
-    if (kerSysDyingGaspCheckPowerLoss()) {        
-
-        /* first to turn off everything other than dsl */        
-        list_for_each(pos, &g_cb_dgasp_list_head->list) {    	
-            tmp = list_entry(pos, CB_DGASP_LIST, list);
-    	    if(strncmp(tmp->name, "dsl", 3)) {
-    	        (tmp->cb_dgasp_fn)(tmp->context); 
-    	    }else {
-    		dsl = tmp;    		    	
-    	    }       
-        }  
-        
-        /* now send dgasp */
-        if(dsl)
-            (dsl->cb_dgasp_fn)(dsl->context); 
-
-        /* reset and shutdown system */
-        kerSysDyingGaspShutdown();
-    }
-#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0))
-return( IRQ_HANDLED );
-#else
-    return( 1 );
-#endif
-}
-
-static void __init kerSysInitDyingGaspHandler( void )
-{
-    CB_DGASP_LIST *new_node;
-
-    if( g_cb_dgasp_list_head != NULL) {
-        printk("Error: kerSysInitDyingGaspHandler: list head is not null\n");
-        return;	
-    }
-    new_node= (CB_DGASP_LIST *)kmalloc(sizeof(CB_DGASP_LIST), GFP_KERNEL);
-    memset(new_node, 0x00, sizeof(CB_DGASP_LIST));
-    INIT_LIST_HEAD(&new_node->list);    
-    g_cb_dgasp_list_head = new_node; 
-		
-} /* kerSysInitDyingGaspHandler */
-
-static void __exit kerSysDeinitDyingGaspHandler( void )
-{
-    struct list_head *pos;
-    CB_DGASP_LIST *tmp; 
-     	
-    if(g_cb_dgasp_list_head == NULL)
-        return;
-        
-    list_for_each(pos, &g_cb_dgasp_list_head->list) {    	
-    	tmp = list_entry(pos, CB_DGASP_LIST, list);
-        list_del(pos);
-	kfree(tmp);
-    }       
-
-    kfree(g_cb_dgasp_list_head);	
-    g_cb_dgasp_list_head = NULL;
-    
-} /* kerSysDeinitDyingGaspHandler */
-
-void kerSysRegisterDyingGaspHandler(char *devname, void *cbfn, void *context)
-{
-    CB_DGASP_LIST *new_node;
-
-    if( g_cb_dgasp_list_head == NULL) {
-        printk("Error: kerSysRegisterDyingGaspHandler: list head is null\n");	
-        return;    
-    }
-    
-    if( devname == NULL || cbfn == NULL ) {
-        printk("Error: kerSysRegisterDyingGaspHandler: register info not enough (%s,%x,%x)\n", devname, (unsigned int)cbfn, (unsigned int)context);	    	
-        return;
-    }
-       
-    new_node= (CB_DGASP_LIST *)kmalloc(sizeof(CB_DGASP_LIST), GFP_KERNEL);
-    memset(new_node, 0x00, sizeof(CB_DGASP_LIST));    
-    INIT_LIST_HEAD(&new_node->list);
-    strncpy(new_node->name, devname, IFNAMSIZ);
-    new_node->cb_dgasp_fn = (cb_dgasp_t)cbfn;
-    new_node->context = context;
-    list_add(&new_node->list, &g_cb_dgasp_list_head->list);
-    
-    printk("dgasp: kerSysRegisterDyingGaspHandler: %s registered \n", devname);
-        	
-} /* kerSysRegisterDyingGaspHandler */
-
-void kerSysDeregisterDyingGaspHandler(char *devname)
-{
-    struct list_head *pos;
-    CB_DGASP_LIST *tmp;    
-    
-    if(g_cb_dgasp_list_head == NULL) {
-        printk("Error: kerSysDeregisterDyingGaspHandler: list head is null\n");
-        return;	
-    }
-
-    if(devname == NULL) {
-        printk("Error: kerSysDeregisterDyingGaspHandler: devname is null\n");
-        return;	
-    }
-    
-    printk("kerSysDeregisterDyingGaspHandler: %s is deregistering\n", devname);
-
-    list_for_each(pos, &g_cb_dgasp_list_head->list) {    	
-    	tmp = list_entry(pos, CB_DGASP_LIST, list);
-    	if(!strcmp(tmp->name, devname)) {
-            list_del(pos);
-	    kfree(tmp);
-	    printk("kerSysDeregisterDyingGaspHandler: %s is deregistered\n", devname);
-	    return;
-	}
-    }	
-    printk("kerSysDeregisterDyingGaspHandler: %s not (de)registered\n", devname);
-	
-} /* kerSysDeregisterDyingGaspHandler */
-
-//EXPORT_SYMBOL(kerSysNvRamGet);
-EXPORT_SYMBOL(kerSysGetMacAddress);
-EXPORT_SYMBOL(kerSysReleaseMacAddress);
-EXPORT_SYMBOL(kerSysGetSdramSize);
-EXPORT_SYMBOL(kerSysLedCtrl);
-EXPORT_SYMBOL(kerSysGetResetHold);
-EXPORT_SYMBOL(kerSysLedRegisterHwHandler);
-EXPORT_SYMBOL(BpGetBoardIds);
-EXPORT_SYMBOL(BpGetSdramSize);
-EXPORT_SYMBOL(BpGetPsiSize);
-EXPORT_SYMBOL(BpGetEthernetMacInfo);
-EXPORT_SYMBOL(BpGetRj11InnerOuterPairGpios);
-EXPORT_SYMBOL(BpGetPressAndHoldResetGpio);
-EXPORT_SYMBOL(BpGetVoipResetGpio);
-EXPORT_SYMBOL(BpGetVoipIntrGpio);
-EXPORT_SYMBOL(BpGetPcmciaResetGpio);
-EXPORT_SYMBOL(BpGetRtsCtsUartGpios);
-EXPORT_SYMBOL(BpGetAdslLedGpio);
-EXPORT_SYMBOL(BpGetAdslFailLedGpio);
-EXPORT_SYMBOL(BpGetWirelessLedGpio);
-EXPORT_SYMBOL(BpGetUsbLedGpio);
-EXPORT_SYMBOL(BpGetHpnaLedGpio);
-EXPORT_SYMBOL(BpGetWanDataLedGpio);
-EXPORT_SYMBOL(BpGetPppLedGpio);
-EXPORT_SYMBOL(BpGetPppFailLedGpio);
-EXPORT_SYMBOL(BpGetVoipLedGpio);
-EXPORT_SYMBOL(BpGetWirelessExtIntr);
-EXPORT_SYMBOL(BpGetAdslDyingGaspExtIntr);
-EXPORT_SYMBOL(BpGetVoipExtIntr);
-EXPORT_SYMBOL(BpGetHpnaExtIntr);
-EXPORT_SYMBOL(BpGetHpnaChipSelect);
-EXPORT_SYMBOL(BpGetVoipChipSelect);
-EXPORT_SYMBOL(BpGetWirelessSesBtnGpio);
-EXPORT_SYMBOL(BpGetWirelessSesExtIntr);
-EXPORT_SYMBOL(BpGetWirelessSesLedGpio);
-EXPORT_SYMBOL(kerSysRegisterDyingGaspHandler);
-EXPORT_SYMBOL(kerSysDeregisterDyingGaspHandler);
-EXPORT_SYMBOL(kerSysGetCycleCount);
-EXPORT_SYMBOL(kerSysSetWdTimer);
-EXPORT_SYMBOL(kerSysWakeupMonitorTask);
-
diff --git a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/boardparms.c b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/boardparms.c
deleted file mode 100644
index 1143ded74..000000000
--- a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/boardparms.c
+++ /dev/null
@@ -1,2391 +0,0 @@
-/*
-<:copyright-gpl 
-
- Copyright 2003 Broadcom Corp. All Rights Reserved. 
- 
- This program is free software; you can distribute it and/or modify it 
- under the terms of the GNU General Public License (Version 2) as 
- published by the Free Software Foundation. 
- 
- This program is distributed in the hope it will be useful, but WITHOUT 
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 
- FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License 
- for more details. 
- 
- You should have received a copy of the GNU General Public License along 
- with this program; if not, write to the Free Software Foundation, Inc., 
- 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. 
-
-:>
-*/
-/**************************************************************************
- * File Name  : boardparms.c
- *
- * Description: This file contains the implementation for the BCM63xx board
- *              parameter access functions.
- * 
- * Updates    : 07/14/2003  Created.
- ***************************************************************************/
-
-/* Includes. */
-#include "boardparms.h"
-
-/* Defines. */
-
-/* Default psi size in K bytes */
-#define BP_PSI_DEFAULT_SIZE                     24   
-
-/* Typedefs */
-typedef struct boardparameters
-{
-    char szBoardId[BP_BOARD_ID_LEN];        /* board id string */
-    ETHERNET_MAC_INFO EnetMacInfos[BP_MAX_ENET_MACS];
-    VOIP_DSP_INFO VoIPDspInfo[BP_MAX_VOIP_DSP];
-    unsigned short usSdramSize;             /* SDRAM size and type */
-    unsigned short usPsiSize;               /* persistent storage in K bytes */
-    unsigned short usGpioRj11InnerPair;     /* GPIO pin or not defined */
-    unsigned short usGpioRj11OuterPair;     /* GPIO pin or not defined */
-    unsigned short usGpioPressAndHoldReset; /* GPIO pin or not defined */
-    unsigned short usGpioPcmciaReset;       /* GPIO pin or not defined */
-    unsigned short usGpioUartRts;           /* GPIO pin or not defined */
-    unsigned short usGpioUartCts;           /* GPIO pin or not defined */
-    unsigned short usGpioLedAdsl;           /* GPIO pin or not defined */
-    unsigned short usGpioLedAdslFail;       /* GPIO pin or not defined */
-    unsigned short usGpioLedWireless;       /* GPIO pin or not defined */
-    unsigned short usGpioLedUsb;            /* GPIO pin or not defined */
-    unsigned short usGpioLedHpna;           /* GPIO pin or not defined */
-    unsigned short usGpioLedWanData;        /* GPIO pin or not defined */
-    unsigned short usGpioLedPpp;            /* GPIO pin or not defined */
-    unsigned short usGpioLedPppFail;        /* GPIO pin or not defined */
-    unsigned short usGpioLedBlPowerOn;      /* GPIO pin or not defined */
-    unsigned short usGpioLedBlAlarm;        /* GPIO pin or not defined */
-    unsigned short usGpioLedBlResetCfg;     /* GPIO pin or not defined */
-    unsigned short usGpioLedBlStop;         /* GPIO pin or not defined */
-    unsigned short usExtIntrWireless;       /* ext intr or not defined */
-    unsigned short usExtIntrAdslDyingGasp;  /* ext intr or not defined */
-    unsigned short usExtIntrHpna;           /* ext intr or not defined */
-    unsigned short usCsHpna;                /* chip select not defined */
-    unsigned short usAntInUseWireless;	    /* antenna in use or not defined */
-    unsigned short usGpioSesBtnWireless;    /* GPIO pin or not defined */
-    unsigned short usExtIntrSesBtnWireless; /* ext intr or not defined */        
-    unsigned short usGpioLedSesWireless;    /* GPIO pin or not defined */        
-} BOARD_PARAMETERS, *PBOARD_PARAMETERS;
-
-/* Variables */
-#if defined(_BCM96338_) || defined(CONFIG_BCM96338)
-static BOARD_PARAMETERS g_bcm96338sv =
-{
-    "96338SV",                               /* szBoardId */
-    {{BP_ENET_INTERNAL_PHY,                 /* ucPhyType */
-      0x01,                                 /* ucPhyAddress */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiSck */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiSs */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiMosi */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiMiso */
-      BP_NOT_DEFINED,                       /* usGpioPhyReset */
-      0x01,                                 /* numSwitchPorts */
-      BP_ENET_CONFIG_MDIO,                  /* usConfigType */
-      BP_NOT_DEFINED},                      /* usReverseMii */
-     {BP_ENET_NO_PHY}},                     /* ucPhyType */
-    {{BP_VOIP_NO_DSP},                      /* ucDspType */
-     {BP_VOIP_NO_DSP}},                     /* ucDspType */
-    BP_MEMORY_16MB_1_CHIP,                  /* usSdramSize */
-    BP_PSI_DEFAULT_SIZE,                    /* usPsiSize */
-    BP_NOT_DEFINED,                         /* usGpioRj11InnerPair */
-    BP_NOT_DEFINED,                         /* usGpioRj11OuterPair */
-    BP_NOT_DEFINED,                         /* usGpioPressAndHoldReset */
-    BP_NOT_DEFINED,                         /* usGpioPcmciaReset */
-    BP_NOT_DEFINED,                         /* usGpioUartRts */
-    BP_NOT_DEFINED,                         /* usGpioUartCts */
-    BP_NOT_DEFINED,                         /* usGpioLedAdsl */
-    BP_NOT_DEFINED,                         /* usGpioLedAdslFail */
-    BP_NOT_DEFINED,                         /* usGpioLedWireless */
-    BP_NOT_DEFINED,                         /* usGpioLedUsb */
-    BP_NOT_DEFINED,                         /* usGpioLedHpna */
-    BP_NOT_DEFINED,                         /* usGpioLedWanData */
-    BP_NOT_DEFINED,                         /* usGpioLedPpp */
-    BP_NOT_DEFINED,                         /* usGpioLedPppFail */
-    BP_NOT_DEFINED,                         /* usGpioLedBlPowerOn */
-    BP_NOT_DEFINED,                         /* usGpioLedBlAlarm */
-    BP_NOT_DEFINED,                         /* usGpioLedBlResetCfg */
-    BP_NOT_DEFINED,                         /* usGpioLedBlStop */
-    BP_NOT_DEFINED,                         /* usExtIntrWireless */
-    BP_HW_DEFINED,                          /* usExtIntrAdslDyingGasp */
-    BP_NOT_DEFINED,                         /* usExtIntrHpna */
-    BP_NOT_DEFINED,                         /* usCsHpna */
-    BP_NOT_DEFINED,                         /* usAntInUseWireless */
-    BP_NOT_DEFINED,                         /* usGpioSesBtnWireless */
-    BP_NOT_DEFINED,                         /* usExtIntrSesBtnWireless */
-    BP_NOT_DEFINED                          /* usGpioLedSesWireless */     
-};
-static BOARD_PARAMETERS g_bcm96338l2m8m =
-{
-    "96338L-2M-8M",                         /* szBoardId */
-    {{BP_ENET_INTERNAL_PHY,                 /* ucPhyType */
-      0x01,                                 /* ucPhyAddress */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiSck */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiSs */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiMosi */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiMiso */
-      BP_NOT_DEFINED,                       /* usGpioPhyReset */
-      0x01,                                 /* numSwitchPorts */
-      BP_ENET_CONFIG_MDIO,                  /* usConfigType */
-      BP_NOT_DEFINED},                      /* usReverseMii */
-     {BP_ENET_NO_PHY}},                     /* ucPhyType */
-    {{BP_VOIP_NO_DSP},                      /* ucDspType */
-     {BP_VOIP_NO_DSP}},                     /* ucDspType */
-    BP_MEMORY_8MB_1_CHIP,                   /* usSdramSize */
-    BP_PSI_DEFAULT_SIZE,                    /* usPsiSize */
-    BP_NOT_DEFINED,                         /* usGpioRj11InnerPair */
-    BP_NOT_DEFINED,                         /* usGpioRj11OuterPair */
-    BP_NOT_DEFINED,                         /* usGpioPressAndHoldReset */
-    BP_NOT_DEFINED,                         /* usGpioPcmciaReset */
-    BP_NOT_DEFINED,                         /* usGpioUartRts */
-    BP_NOT_DEFINED,                         /* usGpioUartCts */
-    BP_NOT_DEFINED,                         /* usGpioLedAdsl */
-    BP_GPIO_2_AL,                           /* usGpioLedAdslFail */
-    BP_NOT_DEFINED,                         /* usGpioLedWireless */
-    BP_NOT_DEFINED,                         /* usGpioLedUsb */
-    BP_NOT_DEFINED,                         /* usGpioLedHpna */
-    BP_GPIO_3_AL,                           /* usGpioLedWanData */
-    BP_GPIO_3_AL,                           /* usGpioLedPpp */
-    BP_GPIO_4_AL,                           /* usGpioLedPppFail */
-    BP_GPIO_0_AL,                           /* usGpioLedBlPowerOn */
-    BP_NOT_DEFINED,                         /* usGpioLedBlAlarm */
-    BP_GPIO_3_AL,                           /* usGpioLedBlResetCfg */
-    BP_GPIO_1_AL,                           /* usGpioLedBlStop */
-    BP_NOT_DEFINED,                         /* usExtIntrWireless */
-    BP_HW_DEFINED,                          /* usExtIntrAdslDyingGasp */
-    BP_NOT_DEFINED,                         /* usExtIntrHpna */
-    BP_NOT_DEFINED,                         /* usCsHpna */
-    BP_NOT_DEFINED,                         /* usAntInUseWireless */
-    BP_NOT_DEFINED,                         /* usGpioSesBtnWireless */    
-    BP_NOT_DEFINED,                         /* usExtIntrSesBtnWireless */
-    BP_NOT_DEFINED                          /* usGpioLedSesWireless */         
-};
-static PBOARD_PARAMETERS g_BoardParms[] =
-    {&g_bcm96338sv, &g_bcm96338l2m8m, 0};
-#endif
-
-#if defined(_BCM96345_) || defined(CONFIG_BCM96345)
-static BOARD_PARAMETERS g_bcm96345r =
-{
-    "96345R",                               /* szBoardId */
-    {{BP_ENET_INTERNAL_PHY,                 /* ucPhyType */
-      0x01,                                 /* ucPhyAddress */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiSck */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiSs */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiMosi */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiMiso */
-      BP_NOT_DEFINED,                       /* usGpioPhyReset */
-      0x01,                                 /* numSwitchPorts */
-      BP_ENET_CONFIG_MDIO,                  /* usConfigType */
-      BP_NOT_DEFINED},                      /* usReverseMii */
-     {BP_ENET_NO_PHY}},                     /* ucPhyType */
-    {{BP_VOIP_NO_DSP},                      /* ucDspType */
-     {BP_VOIP_NO_DSP}},                     /* ucDspType */
-    BP_MEMORY_8MB_1_CHIP,                   /* usSdramSize */
-    BP_PSI_DEFAULT_SIZE,                    /* usPsiSize */
-    BP_GPIO_11_AH,                          /* usGpioRj11InnerPair */
-    BP_GPIO_12_AH,                          /* usGpioRj11OuterPair */
-    BP_GPIO_13_AH,                          /* usGpioPressAndHoldReset */
-    BP_NOT_DEFINED,                         /* usGpioPcmciaReset */
-    BP_NOT_DEFINED,                         /* usGpioUartRts */
-    BP_NOT_DEFINED,                         /* usGpioUartCts */
-    BP_GPIO_8_AH,                           /* usGpioLedAdsl */
-    BP_NOT_DEFINED,                         /* usGpioLedAdslFail */
-    BP_NOT_DEFINED,                         /* usGpioLedWireless */
-    BP_NOT_DEFINED,                         /* usGpioLedUsb */
-    BP_NOT_DEFINED,                         /* usGpioLedHpna */
-    BP_GPIO_8_AH,                           /* usGpioLedWanData */
-    BP_GPIO_9_AH,                           /* usGpioLedPpp */
-    BP_NOT_DEFINED,                         /* usGpioLedPppFail */
-    BP_NOT_DEFINED,                         /* usGpioLedBlPowerOn */
-    BP_GPIO_10_AH,                          /* usGpioLedBlAlarm */
-    BP_GPIO_9_AH,                           /* usGpioLedBlResetCfg */
-    BP_GPIO_8_AH,                           /* usGpioLedBlStop */
-    BP_NOT_DEFINED,                         /* usExtIntrWireless */
-    BP_EXT_INTR_0,                          /* usExtIntrAdslDyingGasp */
-    BP_NOT_DEFINED,                         /* usExtIntrHpna */
-    BP_NOT_DEFINED,                         /* usCsHpna */
-    BP_NOT_DEFINED,                         /* usAntInUseWireless */
-    BP_NOT_DEFINED,                         /* usGpioSesBtnWireless */
-    BP_NOT_DEFINED,                         /* usExtIntrSesBtnWireless */
-    BP_NOT_DEFINED                          /* usGpioLedSesWireless */
-};
-
-static BOARD_PARAMETERS g_bcm96345gw2 =
-{
-    /* A hardware jumper determines whether GPIO 13 is used for Press and Hold
-     * Reset or RTS.
-     */
-    "96345GW2",                             /* szBoardId */
-    {{BP_ENET_EXTERNAL_SWITCH,              /* ucPhyType */
-      0x00,                                 /* ucPhyAddress */
-      BP_GPIO_0_AH,                         /* usGpioPhySpiSck */
-      BP_GPIO_4_AH,                         /* usGpioPhySpiSs */
-      BP_GPIO_12_AH,                        /* usGpioPhySpiMosi */
-      BP_GPIO_11_AH,                        /* usGpioPhySpiMiso */
-      BP_NOT_DEFINED,                       /* usGpioPhyReset */
-      0x04,                                 /* numSwitchPorts */
-      BP_ENET_CONFIG_GPIO,                  /* usConfigType */
-      BP_ENET_REVERSE_MII},                 /* usReverseMii */
-     {BP_ENET_NO_PHY}},                     /* ucPhyType */
-    {{BP_VOIP_DSP,                          /* ucDspType */
-      0x00,                                 /* ucDspAddress */
-      BP_EXT_INTR_1,                        /* usExtIntrVoip */
-      BP_GPIO_6_AH,                         /* usGpioVoipReset */
-      BP_GPIO_15_AH,                        /* usGpioVoipIntr */
-      BP_NOT_DEFINED,                       /* usGpioLedVoip */
-      BP_CS_2},                             /* usCsVoip */
-     {BP_VOIP_NO_DSP}},                     /* ucDspType */
-    BP_MEMORY_16MB_1_CHIP,                  /* usSdramSize */
-    BP_PSI_DEFAULT_SIZE,                    /* usPsiSize */
-    BP_NOT_DEFINED,                         /* usGpioRj11InnerPair */
-    BP_NOT_DEFINED,                         /* usGpioRj11OuterPair */
-    BP_GPIO_13_AH,                          /* usGpioPressAndHoldReset */
-    BP_GPIO_2_AH,                           /* usGpioPcmciaReset */
-    BP_GPIO_13_AH,                          /* usGpioUartRts */
-    BP_GPIO_9_AH,                           /* usGpioUartCts */
-    BP_GPIO_8_AH,                           /* usGpioLedAdsl */
-    BP_NOT_DEFINED,                         /* usGpioLedAdslFail */
-    BP_NOT_DEFINED,                         /* usGpioLedWireless */
-    BP_GPIO_7_AH,                           /* usGpioLedUsb */
-    BP_NOT_DEFINED,                         /* usGpioLedHpna */
-    BP_GPIO_8_AH,                           /* usGpioLedWanData */
-    BP_NOT_DEFINED,                         /* usGpioLedPpp */
-    BP_NOT_DEFINED,                         /* usGpioLedPppFail */
-    BP_NOT_DEFINED,                         /* usGpioLedBlPowerOn */
-    BP_GPIO_10_AH,                          /* usGpioLedBlAlarm */
-    BP_GPIO_7_AH,                           /* usGpioLedBlResetCfg */
-    BP_GPIO_8_AH,                           /* usGpioLedBlStop */
-    BP_EXT_INTR_2,                          /* usExtIntrWireless */
-    BP_EXT_INTR_0,                          /* usExtIntrAdslDyingGasp */
-    BP_NOT_DEFINED,                         /* usExtIntrHpna */
-    BP_NOT_DEFINED,                         /* usCsHpna */
-    BP_WLAN_ANT_MAIN,                       /* usAntInUseWireless */
-    BP_NOT_DEFINED,                         /* usGpioSesBtnWireless */
-    BP_NOT_DEFINED,                         /* usExtIntrSesBtnWireless */
-    BP_NOT_DEFINED                          /* usGpioLedSesWireless */    
-};
-
-static BOARD_PARAMETERS g_bcm96345gw =
-{
-    "96345GW",                              /* szBoardId */
-    {{BP_ENET_EXTERNAL_SWITCH,              /* ucPhyType */
-      0x00,                                 /* ucPhyAddress */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiSck */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiSs */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiMosi */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiMiso */
-      BP_NOT_DEFINED,                       /* usGpioPhyReset */
-      0x04,                                 /* numSwitchPorts */
-      BP_ENET_CONFIG_MDIO,                  /* usConfigType */
-      BP_ENET_NO_REVERSE_MII},              /* usReverseMii */
-     {BP_ENET_NO_PHY}},                     /* ucPhyType */
-    {{BP_VOIP_DSP,                          /* ucDspType */
-      0x00,                                 /* ucDspAddress */
-      BP_EXT_INTR_1,                        /* usExtIntrVoip */
-      BP_GPIO_6_AH,                         /* usGpioVoipReset */
-      BP_GPIO_15_AH,                        /* usGpioVoipIntr */
-      BP_NOT_DEFINED,                       /* usGpioLedVoip */
-      BP_CS_2},                             /* usCsVoip */
-     {BP_VOIP_NO_DSP}},                     /* ucDspType */
-    BP_MEMORY_16MB_1_CHIP,                  /* usSdramSize */
-    BP_PSI_DEFAULT_SIZE,                    /* usPsiSize */
-    BP_GPIO_11_AH,                          /* usGpioRj11InnerPair */
-    BP_GPIO_1_AH,                           /* usGpioRj11OuterPair */
-    BP_GPIO_13_AH,                          /* usGpioPressAndHoldReset */
-    BP_GPIO_2_AH,                           /* usGpioPcmciaReset */
-    BP_NOT_DEFINED,                         /* usGpioUartRts */
-    BP_NOT_DEFINED,                         /* usGpioUartCts */
-    BP_GPIO_8_AH,                           /* usGpioLedAdsl */
-    BP_NOT_DEFINED,                         /* usGpioLedAdslFail */
-    BP_GPIO_10_AH,                          /* usGpioLedWireless */
-    BP_GPIO_7_AH,                           /* usGpioLedUsb */
-    BP_NOT_DEFINED,                         /* usGpioLedHpna */
-    BP_GPIO_8_AH,                           /* usGpioLedWanData */
-    BP_NOT_DEFINED,                         /* usGpioLedPpp */
-    BP_NOT_DEFINED,                         /* usGpioLedPppFail */
-    BP_NOT_DEFINED,                         /* usGpioLedBlPowerOn */
-    BP_GPIO_9_AH,                           /* usGpioLedBlAlarm */
-    BP_GPIO_10_AH,                          /* usGpioLedBlResetCfg */
-    BP_GPIO_8_AH,                           /* usGpioLedBlStop */
-    BP_EXT_INTR_2,                          /* usExtIntrWireless */
-    BP_EXT_INTR_0,                          /* usExtIntrAdslDyingGasp */
-    BP_EXT_INTR_3,                          /* usExtIntrHpna */
-    BP_CS_1,                                /* usCsHpna */
-    BP_WLAN_ANT_MAIN,                       /* usAntInUseWireless */
-    BP_NOT_DEFINED,                         /* usGpioSesBtnWireless */
-    BP_NOT_DEFINED,                         /* usExtIntrSesBtnWireless */
-    BP_NOT_DEFINED                          /* usGpioLedSesWireless */
-};
-
-static BOARD_PARAMETERS g_bcm96335r =
-{
-    "96335R",                               /* szBoardId */
-    {{BP_ENET_INTERNAL_PHY,                 /* ucPhyType */
-      0x01,                                 /* ucPhyAddress */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiSck */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiSs */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiMosi */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiMiso */
-      BP_NOT_DEFINED,                       /* usGpioPhyReset */
-      0x01,                                 /* numSwitchPorts */
-      BP_ENET_CONFIG_MDIO,                  /* usConfigType */
-      BP_NOT_DEFINED},                      /* usReverseMii */
-     {BP_ENET_NO_PHY}},                     /* ucPhyType */
-    {{BP_VOIP_NO_DSP},                      /* ucDspType */
-     {BP_VOIP_NO_DSP}},                     /* ucDspType */
-    BP_MEMORY_8MB_1_CHIP,                   /* usSdramSize */
-    BP_PSI_DEFAULT_SIZE,                    /* usPsiSize */
-    BP_NOT_DEFINED,                         /* usGpioRj11InnerPair */
-    BP_NOT_DEFINED,                         /* usGpioRj11OuterPair */
-    BP_GPIO_14_AH,                          /* usGpioPressAndHoldReset */
-    BP_NOT_DEFINED,                         /* usGpioPcmciaReset */
-    BP_NOT_DEFINED,                         /* usGpioUartRts */
-    BP_NOT_DEFINED,                         /* usGpioUartCts */
-    BP_GPIO_9_AH,                           /* usGpioLedAdsl */
-    BP_NOT_DEFINED,                         /* usGpioLedAdslFail */
-    BP_NOT_DEFINED,                         /* usGpioLedWireless */
-    BP_NOT_DEFINED,                         /* usGpioLedUsb */
-    BP_NOT_DEFINED,                         /* usGpioLedHpna */
-    BP_GPIO_9_AH,                           /* usGpioLedWanData */
-    BP_GPIO_8_AH,                           /* usGpioLedPpp */
-    BP_NOT_DEFINED,                         /* usGpioLedPppFail */
-    BP_NOT_DEFINED,                         /* usGpioLedBlPowerOn */
-    BP_GPIO_10_AH,                          /* usGpioLedBlAlarm */
-    BP_GPIO_8_AH,                           /* usGpioLedBlResetCfg */
-    BP_GPIO_9_AH,                           /* usGpioLedBlStop */
-    BP_NOT_DEFINED,                         /* usExtIntrWireless */
-    BP_NOT_DEFINED,                         /* usExtIntrAdslDyingGasp */
-    BP_NOT_DEFINED,                         /* usExtIntrHpna */
-    BP_NOT_DEFINED,                         /* usCsHpna */
-    BP_NOT_DEFINED,                         /* usAntInUseWireless */
-    BP_NOT_DEFINED,                         /* usGpioSesBtnWireless */
-    BP_NOT_DEFINED,                         /* usExtIntrSesBtnWireless */
-    BP_NOT_DEFINED                          /* usGpioLedSesWireless */
-};
-
-static BOARD_PARAMETERS g_bcm96345r0 =
-{
-    "96345R0",                              /* szBoardId */
-    {{BP_ENET_INTERNAL_PHY,                 /* ucPhyType */
-      0x01,                                 /* ucPhyAddress */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiSck */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiSs */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiMosi */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiMiso */
-      BP_NOT_DEFINED,                       /* usGpioPhyReset */
-      0x01,                                 /* numSwitchPorts */
-      BP_ENET_CONFIG_MDIO,                  /* usConfigType */
-      BP_NOT_DEFINED},                      /* usReverseMii */
-     {BP_ENET_NO_PHY}},                     /* ucPhyType */
-    {{BP_VOIP_NO_DSP},                      /* ucDspType */
-     {BP_VOIP_NO_DSP}},                     /* ucDspType */
-    BP_MEMORY_8MB_1_CHIP,                   /* usSdramSize */
-    BP_PSI_DEFAULT_SIZE,                    /* usPsiSize */
-    BP_NOT_DEFINED,                         /* usGpioRj11InnerPair */
-    BP_NOT_DEFINED,                         /* usGpioRj11OuterPair */
-    BP_NOT_DEFINED,                         /* usGpioPressAndHoldReset */
-    BP_NOT_DEFINED,                         /* usGpioPcmciaReset */
-    BP_NOT_DEFINED,                         /* usGpioUartRts */
-    BP_NOT_DEFINED,                         /* usGpioUartCts */
-    BP_GPIO_8_AH,                           /* usGpioLedAdsl */
-    BP_NOT_DEFINED,                         /* usGpioLedAdslFail */
-    BP_NOT_DEFINED,                         /* usGpioLedWireless */
-    BP_NOT_DEFINED,                         /* usGpioLedUsb */
-    BP_NOT_DEFINED,                         /* usGpioLedHpna */
-    BP_GPIO_9_AH,                           /* usGpioLedWanData */
-    BP_GPIO_9_AH,                           /* usGpioLedPpp */
-    BP_NOT_DEFINED,                         /* usGpioLedPppFail */
-    BP_NOT_DEFINED,                         /* usGpioLedBlPowerOn */
-    BP_GPIO_9_AH,                           /* usGpioLedBlAlarm */
-    BP_GPIO_8_AH,                           /* usGpioLedBlResetCfg */
-    BP_GPIO_8_AH,                           /* usGpioLedBlStop */
-    BP_NOT_DEFINED,                         /* usExtIntrWireless */
-    BP_NOT_DEFINED,                         /* usExtIntrAdslDyingGasp */
-    BP_NOT_DEFINED,                         /* usExtIntrHpna */
-    BP_NOT_DEFINED,                         /* usCsHpna */
-    BP_NOT_DEFINED,                         /* usAntInUseWireless */
-    BP_NOT_DEFINED,                         /* usGpioSesBtnWireless */     
-    BP_NOT_DEFINED,                         /* usExtIntrSesBtnWireless */
-    BP_NOT_DEFINED                          /* usGpioLedSesWireless */    
-};
-
-static BOARD_PARAMETERS g_bcm96345rs =
-{
-    "96345RS",                              /* szBoardId */
-    {{BP_ENET_EXTERNAL_SWITCH,              /* ucPhyType */
-      0x00,                                 /* ucPhyAddress */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiSck */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiSs */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiMosi */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiMiso */
-      BP_NOT_DEFINED,                       /* usGpioPhyReset */
-      0x01,                                 /* numSwitchPorts */
-      BP_ENET_CONFIG_MDIO,                  /* usConfigType */
-      BP_ENET_NO_REVERSE_MII},              /* usReverseMii */
-     {BP_ENET_NO_PHY}},                     /* ucPhyType */
-    {{BP_VOIP_NO_DSP},                      /* ucDspType */
-     {BP_VOIP_NO_DSP}},                     /* ucDspType */
-    BP_MEMORY_8MB_1_CHIP,                   /* usSdramSize */
-    BP_PSI_DEFAULT_SIZE,                    /* usPsiSize */
-    BP_GPIO_11_AH,                          /* usGpioRj11InnerPair */
-    BP_GPIO_12_AH,                          /* usGpioRj11OuterPair */
-    BP_GPIO_13_AH,                          /* usGpioPressAndHoldReset */
-    BP_NOT_DEFINED,                         /* usGpioPcmciaReset */
-    BP_NOT_DEFINED,                         /* usGpioUartRts */
-    BP_NOT_DEFINED,                         /* usGpioUartCts */
-    BP_GPIO_8_AH,                           /* usGpioLedAdsl */
-    BP_NOT_DEFINED,                         /* usGpioLedAdslFail */
-    BP_NOT_DEFINED,                         /* usGpioLedWireless */
-    BP_NOT_DEFINED,                         /* usGpioLedUsb */
-    BP_NOT_DEFINED,                         /* usGpioLedHpna */
-    BP_GPIO_8_AH,                           /* usGpioLedWanData */
-    BP_GPIO_9_AH,                           /* usGpioLedPpp */
-    BP_NOT_DEFINED,                         /* usGpioLedPppFail */
-    BP_NOT_DEFINED,                         /* usGpioLedBlPowerOn */
-    BP_GPIO_10_AH,                          /* usGpioLedBlAlarm */
-    BP_GPIO_9_AH,                           /* usGpioLedBlResetCfg */
-    BP_GPIO_8_AH,                           /* usGpioLedBlStop */
-    BP_NOT_DEFINED,                         /* usExtIntrWireless */
-    BP_EXT_INTR_0,                          /* usExtIntrAdslDyingGasp */
-    BP_NOT_DEFINED,                         /* usExtIntrHpna */
-    BP_NOT_DEFINED,                         /* usCsHpna */
-    BP_NOT_DEFINED,                         /* usAntInUseWireless */
-    BP_NOT_DEFINED,                         /* usGpioSesBtnWireless */
-    BP_NOT_DEFINED,                         /* usExtIntrSesBtnWireless */
-    BP_NOT_DEFINED                          /* usGpioLedSesWireless */
-};
-
-static PBOARD_PARAMETERS g_BoardParms[] =
-    {&g_bcm96345r, &g_bcm96345gw2, &g_bcm96345gw, &g_bcm96335r, &g_bcm96345r0,
-     &g_bcm96345rs, 0};
-#endif
-
-#if defined(_BCM96348_) || defined(CONFIG_BCM96348)
-
-static BOARD_PARAMETERS g_bcm96348r =
-{
-    "96348R",                               /* szBoardId */
-    {{BP_ENET_INTERNAL_PHY,                 /* ucPhyType */
-      0x01,                                 /* ucPhyAddress */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiSck */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiSs */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiMosi */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiMiso */
-      BP_NOT_DEFINED,                       /* usGpioPhyReset */
-      0x01,                                 /* numSwitchPorts */
-      BP_ENET_CONFIG_MDIO,                  /* usConfigType */
-      BP_NOT_DEFINED},                      /* usReverseMii */
-     {BP_ENET_NO_PHY}},                     /* ucPhyType */
-    {{BP_VOIP_NO_DSP},                      /* ucDspType */
-     {BP_VOIP_NO_DSP}},                     /* ucDspType */
-    BP_MEMORY_8MB_1_CHIP,                   /* usSdramSize */
-    BP_PSI_DEFAULT_SIZE,                    /* usPsiSize */
-    BP_NOT_DEFINED,                         /* usGpioRj11InnerPair */
-    BP_NOT_DEFINED,                         /* usGpioRj11OuterPair */
-    BP_GPIO_7_AH,                           /* usGpioPressAndHoldReset */
-    BP_NOT_DEFINED,                         /* usGpioPcmciaReset */
-    BP_NOT_DEFINED,                         /* usGpioUartRts */
-    BP_NOT_DEFINED,                         /* usGpioUartCts */
-    BP_NOT_DEFINED,                         /* usGpioLedAdsl */
-    BP_GPIO_2_AL,                           /* usGpioLedAdslFail */
-    BP_NOT_DEFINED,                         /* usGpioLedWireless */
-    BP_NOT_DEFINED,                         /* usGpioLedUsb */
-    BP_NOT_DEFINED,                         /* usGpioLedHpna */
-    BP_GPIO_3_AL,                           /* usGpioLedWanData */
-    BP_GPIO_3_AL,                           /* usGpioLedPpp */
-    BP_GPIO_4_AL,                           /* usGpioLedPppFail */
-    BP_GPIO_0_AL,                           /* usGpioLedBlPowerOn */
-    BP_NOT_DEFINED,                         /* usGpioLedBlAlarm */
-    BP_GPIO_3_AL,                           /* usGpioLedBlResetCfg */
-    BP_GPIO_1_AL,                           /* usGpioLedBlStop */
-    BP_NOT_DEFINED,                         /* usExtIntrWireless */
-    BP_HW_DEFINED,                          /* usExtIntrAdslDyingGasp */
-    BP_NOT_DEFINED,                         /* usExtIntrHpna */
-    BP_NOT_DEFINED,                         /* usCsHpna */
-    BP_NOT_DEFINED,                         /* usAntInUseWireless */
-    BP_NOT_DEFINED,                         /* usGpioSesBtnWireless */
-    BP_NOT_DEFINED,                         /* usExtIntrSesBtnWireless */
-    BP_NOT_DEFINED                          /* usGpioLedSesWireless */    
-};
-
-static BOARD_PARAMETERS g_bcm96348lv =
-{
-    "96348LV",                               /* szBoardId */
-    {{BP_ENET_INTERNAL_PHY,                 /* ucPhyType */
-      0x01,                                 /* ucPhyAddress */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiSck */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiSs */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiMosi */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiMiso */
-      BP_NOT_DEFINED,                       /* usGpioPhyReset */
-      0x01,                                 /* numSwitchPorts */
-      BP_ENET_CONFIG_MDIO,                  /* usConfigType */
-      BP_NOT_DEFINED},                      /* usReverseMii */
-     {BP_ENET_EXTERNAL_PHY,                 /* ucPhyType */
-      0x02,                                 /* ucPhyAddress */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiSck */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiSs */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiMosi */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiMiso */
-      BP_GPIO_5_AL,                         /* usGpioPhyReset */
-      0x01,                                 /* numSwitchPorts */
-      BP_ENET_CONFIG_MDIO,                  /* usConfigType */
-      BP_NOT_DEFINED}},                     /* usReverseMii */
-    {{BP_VOIP_NO_DSP},                      /* ucDspType */
-     {BP_VOIP_NO_DSP}},                     /* ucDspType */
-    BP_MEMORY_16MB_2_CHIP,                  /* usSdramSize */
-    BP_PSI_DEFAULT_SIZE,                    /* usPsiSize */
-    BP_NOT_DEFINED,                         /* usGpioRj11InnerPair */
-    BP_NOT_DEFINED,                         /* usGpioRj11OuterPair */
-    BP_GPIO_7_AH,                           /* usGpioPressAndHoldReset */
-    BP_NOT_DEFINED,                         /* usGpioPcmciaReset */
-    BP_NOT_DEFINED,                         /* usGpioUartRts */
-    BP_NOT_DEFINED,                         /* usGpioUartCts */
-    BP_NOT_DEFINED,                         /* usGpioLedAdsl */
-    BP_GPIO_2_AL,                           /* usGpioLedAdslFail */
-    BP_NOT_DEFINED,                         /* usGpioLedWireless */
-    BP_NOT_DEFINED,                         /* usGpioLedUsb */
-    BP_NOT_DEFINED,                         /* usGpioLedHpna */
-    BP_GPIO_3_AL,                           /* usGpioLedWanData */
-    BP_GPIO_3_AL,                           /* usGpioLedPpp */
-    BP_GPIO_4_AL,                           /* usGpioLedPppFail */
-    BP_GPIO_0_AL,                           /* usGpioLedBlPowerOn */
-    BP_NOT_DEFINED,                         /* usGpioLedBlAlarm */
-    BP_GPIO_3_AL,                           /* usGpioLedBlResetCfg */
-    BP_GPIO_1_AL,                           /* usGpioLedBlStop */
-    BP_NOT_DEFINED,                         /* usExtIntrWireless */
-    BP_NOT_DEFINED,                         /* usExtIntrAdslDyingGasp */
-    BP_NOT_DEFINED,                         /* usExtIntrHpna */
-    BP_NOT_DEFINED,                         /* usCsHpna */
-    BP_NOT_DEFINED,                         /* usAntInUseWireless */
-    BP_NOT_DEFINED,                         /* usGpioSesBtnWireless */
-    BP_NOT_DEFINED,                         /* usExtIntrSesBtnWireless */
-    BP_NOT_DEFINED                          /* usGpioLedSesWireless */
-};
-
-static BOARD_PARAMETERS g_bcm96348gw =
-{
-    "96348GW",                              /* szBoardId */
-    {{BP_ENET_INTERNAL_PHY,                 /* ucPhyType */
-      0x01,                                 /* ucPhyAddress */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiSck */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiSs */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiMosi */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiMiso */
-      BP_NOT_DEFINED,                       /* usGpioPhyReset */
-      0x01,                                 /* numSwitchPorts */
-      BP_ENET_CONFIG_MDIO,                  /* usConfigType */
-      BP_NOT_DEFINED},                      /* usReverseMii */
-     {BP_ENET_EXTERNAL_SWITCH,              /* ucPhyType */
-      0x00,                                 /* ucPhyAddress */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiSck */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiSs */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiMosi */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiMiso */
-      BP_NOT_DEFINED,                       /* usGpioPhyReset */
-      0x03,                                 /* numSwitchPorts */
-      BP_ENET_CONFIG_SPI_SSB_0,             /* usConfigType */
-      BP_ENET_REVERSE_MII}},                /* usReverseMii */
-    {{BP_VOIP_DSP,                          /* ucDspType */
-      0x00,                                 /* ucDspAddress */
-      BP_EXT_INTR_2,                        /* usExtIntrVoip */
-      BP_GPIO_6_AH,                         /* usGpioVoipReset */
-      BP_GPIO_34_AH,                        /* usGpioVoipIntr */
-      BP_NOT_DEFINED,                       /* usGpioLedVoip */
-      BP_CS_2},                             /* usCsVoip */
-     {BP_VOIP_NO_DSP}},                     /* ucDspType */
-    BP_MEMORY_16MB_2_CHIP,                  /* usSdramSize */
-    BP_PSI_DEFAULT_SIZE,                    /* usPsiSize */
-    BP_NOT_DEFINED,                         /* usGpioRj11InnerPair */
-    BP_NOT_DEFINED,                         /* usGpioRj11OuterPair */
-    BP_GPIO_33_AL,                          /* usGpioPressAndHoldReset */
-    BP_NOT_DEFINED,                         /* usGpioPcmciaReset */
-    BP_NOT_DEFINED,                         /* usGpioUartRts */
-    BP_NOT_DEFINED,                         /* usGpioUartCts */
-    BP_NOT_DEFINED,                         /* usGpioLedAdsl */
-    BP_GPIO_2_AL,                           /* usGpioLedAdslFail */
-    BP_NOT_DEFINED,                         /* usGpioLedWireless */
-    BP_NOT_DEFINED,                         /* usGpioLedUsb */
-    BP_NOT_DEFINED,                         /* usGpioLedHpna */
-    BP_GPIO_3_AL,                           /* usGpioLedWanData */
-    BP_GPIO_3_AL,                           /* usGpioLedPpp */
-    BP_GPIO_4_AL,                           /* usGpioLedPppFail */
-    BP_GPIO_0_AL,                           /* usGpioLedBlPowerOn */
-    BP_NOT_DEFINED,                         /* usGpioLedBlAlarm */
-    BP_GPIO_3_AL,                           /* usGpioLedBlResetCfg */
-    BP_GPIO_1_AL,                           /* usGpioLedBlStop */
-    BP_NOT_DEFINED,                         /* usExtIntrWireless */
-    BP_HW_DEFINED,                          /* usExtIntrAdslDyingGasp */
-    BP_NOT_DEFINED,                         /* usExtIntrHpna */
-    BP_NOT_DEFINED,                         /* usCsHpna */
-    BP_WLAN_ANT_MAIN,                       /* usAntInUseWireless */
-    BP_NOT_DEFINED, /* BP_GPIO_35_AH, */    /* usGpioSesBtnWireless */
-    BP_NOT_DEFINED, /* BP_EXT_INTR_3, */    /* usExtIntrSesBtnWireless */
-    BP_NOT_DEFINED  /* BP_GPIO_0_AL   */    /* usGpioLedSesWireless */
-};
-
-
-static BOARD_PARAMETERS g_bcm96348gw_10 =
-{
-    "96348GW-10",                           /* szBoardId */
-    {{BP_ENET_INTERNAL_PHY,                 /* ucPhyType */
-      0x01,                                 /* ucPhyAddress */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiSck */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiSs */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiMosi */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiMiso */
-      BP_NOT_DEFINED,                       /* usGpioPhyReset */
-      0x01,                                 /* numSwitchPorts */
-      BP_ENET_CONFIG_MDIO,                  /* usConfigType */
-      BP_NOT_DEFINED},                      /* usReverseMii */
-     {BP_ENET_EXTERNAL_SWITCH,              /* ucPhyType */
-      0x00,                                 /* ucPhyAddress */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiSck */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiSs */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiMosi */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiMiso */
-      BP_NOT_DEFINED,                       /* usGpioPhyReset */
-      0x03,                                 /* numSwitchPorts */
-      BP_ENET_CONFIG_SPI_SSB_1,             /* usConfigType */
-      BP_ENET_REVERSE_MII}},                /* usReverseMii */
-    {{BP_VOIP_DSP,                          /* ucDspType */
-      0x00,                                 /* ucDspAddress */
-      BP_EXT_INTR_2,                        /* usExtIntrVoip */
-      BP_GPIO_6_AH,                         /* usGpioVoipReset */
-      BP_GPIO_34_AH,                        /* usGpioVoipIntr */
-      BP_NOT_DEFINED,                       /* usGpioLedVoip */
-      BP_CS_2},                             /* usCsVoip */
-     {BP_VOIP_NO_DSP}},                     /* ucDspType */
-    BP_MEMORY_16MB_2_CHIP,                  /* usSdramSize */
-    BP_PSI_DEFAULT_SIZE,                    /* usPsiSize */
-    BP_NOT_DEFINED,                         /* usGpioRj11InnerPair */
-    BP_NOT_DEFINED,                         /* usGpioRj11OuterPair */
-    BP_GPIO_33_AL,                          /* usGpioPressAndHoldReset */
-    BP_NOT_DEFINED,                         /* usGpioPcmciaReset */
-    BP_NOT_DEFINED,                         /* usGpioUartRts */
-    BP_NOT_DEFINED,                         /* usGpioUartCts */
-    BP_NOT_DEFINED,                         /* usGpioLedAdsl */
-    BP_GPIO_2_AL,                           /* usGpioLedAdslFail */
-    BP_NOT_DEFINED,                         /* usGpioLedWireless */
-    BP_NOT_DEFINED,                         /* usGpioLedUsb */
-    BP_NOT_DEFINED,                         /* usGpioLedHpna */
-    BP_GPIO_3_AL,                           /* usGpioLedWanData */
-    BP_GPIO_3_AL,                           /* usGpioLedPpp */
-    BP_GPIO_4_AL,                           /* usGpioLedPppFail */
-    BP_GPIO_0_AL,                           /* usGpioLedBlPowerOn */
-    BP_NOT_DEFINED,                         /* usGpioLedBlAlarm */
-    BP_GPIO_3_AL,                           /* usGpioLedBlResetCfg */
-    BP_GPIO_1_AL,                           /* usGpioLedBlStop */
-    BP_NOT_DEFINED,                         /* usExtIntrWireless */
-    BP_HW_DEFINED,                          /* usExtIntrAdslDyingGasp */
-    BP_NOT_DEFINED,                         /* usExtIntrHpna */
-    BP_NOT_DEFINED,                         /* usCsHpna */
-    BP_WLAN_ANT_MAIN,                       /* usAntInUseWireless */
-    BP_NOT_DEFINED,                         /* usGpioSesBtnWireless */
-    BP_NOT_DEFINED,                         /* usExtIntrSesBtnWireless */
-    BP_NOT_DEFINED                          /* usGpioLedSesWireless */
-};
-
-static BOARD_PARAMETERS g_bcm96348gw_11 =
-{
-    "96348GW-11",                           /* szBoardId */
-    {{BP_ENET_NO_PHY},                      /* ucPhyType */
-     {BP_ENET_EXTERNAL_SWITCH,              /* ucPhyType */
-      0x00,                                 /* ucPhyAddress */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiSck */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiSs */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiMosi */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiMiso */
-      BP_NOT_DEFINED,                       /* usGpioPhyReset */
-      0x04,                                 /* numSwitchPorts */
-      BP_ENET_CONFIG_SPI_SSB_1,             /* usConfigType */
-      BP_ENET_REVERSE_MII}},                /* usReverseMii */
-    {{BP_VOIP_NO_DSP},                      /* ucDspType */
-     {BP_VOIP_NO_DSP}},                     /* ucDspType */
-    BP_MEMORY_16MB_2_CHIP,                  /* usSdramSize */
-    BP_PSI_DEFAULT_SIZE,                    /* usPsiSize */
-    BP_NOT_DEFINED,                         /* usGpioRj11InnerPair */
-    BP_NOT_DEFINED,                         /* usGpioRj11OuterPair */
-    BP_GPIO_33_AL,                          /* usGpioPressAndHoldReset */
-    BP_NOT_DEFINED,                         /* usGpioPcmciaReset */
-    BP_NOT_DEFINED,                         /* usGpioUartRts */
-    BP_NOT_DEFINED,                         /* usGpioUartCts */
-    BP_NOT_DEFINED,                         /* usGpioLedAdsl */
-    BP_GPIO_2_AL,                           /* usGpioLedAdslFail */
-    BP_NOT_DEFINED,                         /* usGpioLedWireless */
-    BP_NOT_DEFINED,                         /* usGpioLedUsb */
-    BP_NOT_DEFINED,                         /* usGpioLedHpna */
-    BP_GPIO_3_AL,                           /* usGpioLedWanData */
-    BP_GPIO_3_AL,                           /* usGpioLedPpp */
-    BP_GPIO_4_AL,                           /* usGpioLedPppFail */
-    BP_GPIO_0_AL,                           /* usGpioLedBlPowerOn */
-    BP_NOT_DEFINED,                         /* usGpioLedBlAlarm */
-    BP_GPIO_3_AL,                           /* usGpioLedBlResetCfg */
-    BP_GPIO_1_AL,                           /* usGpioLedBlStop */
-    BP_NOT_DEFINED,                         /* usExtIntrWireless */
-    BP_HW_DEFINED,                          /* usExtIntrAdslDyingGasp */
-    BP_NOT_DEFINED,                         /* usExtIntrHpna */
-    BP_NOT_DEFINED,                         /* usCsHpna */
-    BP_NOT_DEFINED,                         /* usAntInUseWireless */
-    BP_NOT_DEFINED,                         /* usGpioSesBtnWireless */
-    BP_NOT_DEFINED,                         /* usExtIntrSesBtnWireless */
-    BP_NOT_DEFINED                          /* usGpioLedSesWireless */    
-};
-
-static BOARD_PARAMETERS g_bcm96348sv =
-{
-    "96348SV",                              /* szBoardId */
-    {{BP_ENET_INTERNAL_PHY,                 /* ucPhyType */
-      0x01,                                 /* ucPhyAddress */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiSck */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiSs */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiMosi */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiMiso */
-      BP_NOT_DEFINED,                       /* usGpioPhyReset */
-      0x01,                                 /* numSwitchPorts */
-      BP_ENET_CONFIG_MDIO,                  /* usConfigType */
-      BP_NOT_DEFINED},                      /* usReverseMii */
-     {BP_ENET_EXTERNAL_PHY,                 /* ucPhyType */
-      0x1f,                                 /* ucPhyAddress */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiSck */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiSs */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiMosi */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiMiso */
-      BP_NOT_DEFINED,                       /* usGpioPhyReset */
-      0x01,                                 /* numSwitchPorts */
-      BP_ENET_CONFIG_MDIO,                  /* usConfigType */
-      BP_NOT_DEFINED}},                     /* usReverseMii */
-    {{BP_VOIP_NO_DSP},                      /* ucDspType */
-     {BP_VOIP_NO_DSP}},                     /* ucDspType */
-    BP_MEMORY_32MB_2_CHIP,                  /* usSdramSize */
-    BP_PSI_DEFAULT_SIZE,                    /* usPsiSize */
-    BP_NOT_DEFINED,                         /* usGpioRj11InnerPair */
-    BP_NOT_DEFINED,                         /* usGpioRj11OuterPair */
-    BP_NOT_DEFINED,                         /* usGpioPressAndHoldReset */
-    BP_NOT_DEFINED,                         /* usGpioPcmciaReset */
-    BP_NOT_DEFINED,                         /* usGpioUartRts */
-    BP_NOT_DEFINED,                         /* usGpioUartCts */
-    BP_NOT_DEFINED,                         /* usGpioLedAdsl */
-    BP_NOT_DEFINED,                         /* usGpioLedAdslFail */
-    BP_NOT_DEFINED,                         /* usGpioLedWireless */
-    BP_NOT_DEFINED,                         /* usGpioLedUsb */
-    BP_NOT_DEFINED,                         /* usGpioLedHpna */
-    BP_NOT_DEFINED,                         /* usGpioLedWanData */
-    BP_NOT_DEFINED,                         /* usGpioLedPpp */
-    BP_NOT_DEFINED,                         /* usGpioLedPppFail */
-    BP_NOT_DEFINED,                         /* usGpioLedBlPowerOn */
-    BP_NOT_DEFINED,                         /* usGpioLedBlAlarm */
-    BP_NOT_DEFINED,                         /* usGpioLedBlResetCfg */
-    BP_NOT_DEFINED,                         /* usGpioLedBlStop */
-    BP_NOT_DEFINED,                         /* usExtIntrWireless */
-    BP_HW_DEFINED,                          /* usExtIntrAdslDyingGasp */
-    BP_NOT_DEFINED,                         /* usExtIntrHpna */
-    BP_NOT_DEFINED,                         /* usCsHpna */
-    BP_NOT_DEFINED,                         /* usAntInUseWireless */
-    BP_NOT_DEFINED,                         /* usGpioSesBtnWireless */
-    BP_NOT_DEFINED,                         /* usExtIntrSesBtnWireless */
-    BP_NOT_DEFINED                          /* usGpioLedSesWireless */
-};
-
-
-static BOARD_PARAMETERS g_bcm96348gw_dualDsp =
-{
-    "96348GW-DualDSP",                      /* szBoardId */
-    {{BP_ENET_INTERNAL_PHY,                 /* ucPhyType */
-      0x01,                                 /* ucPhyAddress */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiSck */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiSs */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiMosi */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiMiso */
-      BP_NOT_DEFINED,                       /* usGpioPhyReset */
-      0x01,                                 /* numSwitchPorts */
-      BP_ENET_CONFIG_MDIO,                  /* usConfigType */
-      BP_NOT_DEFINED},                      /* usReverseMii */
-     {BP_ENET_EXTERNAL_SWITCH,              /* ucPhyType */
-      0x00,                                 /* ucPhyAddress */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiSck */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiSs */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiMosi */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiMiso */
-      BP_NOT_DEFINED,                       /* usGpioPhyReset */
-      0x03,                                 /* numSwitchPorts */
-      BP_ENET_CONFIG_SPI_SSB_1,             /* usConfigType */
-      BP_ENET_REVERSE_MII}},                /* usReverseMii */
-    {{BP_VOIP_DSP,                          /* ucDspType */
-      0x00,                                 /* ucDspAddress */
-      BP_EXT_INTR_2,                        /* usExtIntrVoip */
-      BP_UNEQUIPPED,                        /* usGpioVoipReset */
-      BP_GPIO_34_AH,                        /* usGpioVoipIntr */
-      BP_NOT_DEFINED,                       /* usGpioLedVoip */
-      BP_CS_2},                             /* usCsVoip */
-     {BP_VOIP_DSP,                          /* ucDspType */
-      0x01,                                 /* ucDspAddress */
-      BP_EXT_INTR_3,                        /* usExtIntrVoip */
-      BP_UNEQUIPPED ,                       /* usGpioVoipReset */
-      BP_GPIO_35_AH,                        /* usGpioVoipIntr */
-      BP_NOT_DEFINED,                       /* usGpioLedVoip */
-      BP_CS_3}},                            /* usCsVoip */
-    BP_MEMORY_16MB_2_CHIP,                  /* usSdramSize */
-    BP_PSI_DEFAULT_SIZE,                    /* usPsiSize */
-    BP_NOT_DEFINED,                         /* usGpioRj11InnerPair */
-    BP_NOT_DEFINED,                         /* usGpioRj11OuterPair */
-    BP_GPIO_33_AL,                          /* usGpioPressAndHoldReset */
-    BP_NOT_DEFINED,                         /* usGpioPcmciaReset */
-    BP_NOT_DEFINED,                         /* usGpioUartRts */
-    BP_NOT_DEFINED,                         /* usGpioUartCts */
-    BP_NOT_DEFINED,                         /* usGpioLedAdsl */
-    BP_GPIO_2_AL,                           /* usGpioLedAdslFail */
-    BP_NOT_DEFINED,                         /* usGpioLedWireless */
-    BP_NOT_DEFINED,                         /* usGpioLedUsb */
-    BP_NOT_DEFINED,                         /* usGpioLedHpna */
-    BP_GPIO_3_AL,                           /* usGpioLedWanData */
-    BP_GPIO_3_AL,                           /* usGpioLedPpp */
-    BP_GPIO_4_AL,                           /* usGpioLedPppFail */
-    BP_GPIO_0_AL,                           /* usGpioLedBlPowerOn */
-    BP_NOT_DEFINED,                         /* usGpioLedBlAlarm */
-    BP_GPIO_3_AL,                           /* usGpioLedBlResetCfg */
-    BP_GPIO_1_AL,                           /* usGpioLedBlStop */
-    BP_NOT_DEFINED,                         /* usExtIntrWireless */
-    BP_HW_DEFINED,                          /* usExtIntrAdslDyingGasp */
-    BP_NOT_DEFINED,                         /* usExtIntrHpna */
-    BP_NOT_DEFINED,                         /* usCsHpna */
-    BP_WLAN_ANT_MAIN,                       /* usAntInUseWireless */
-    BP_NOT_DEFINED,                         /* usGpioSesBtnWireless */
-    BP_NOT_DEFINED,                         /* usExtIntrSesBtnWireless */
-    BP_NOT_DEFINED                          /* usGpioLedSesWireless */
-};
-
-
-static BOARD_PARAMETERS g_bcmCustom_01 =
-{
-     "BCMCUST_01",                          /* szBoardId */
-    {{BP_ENET_INTERNAL_PHY,                 /* ucPhyType */
-      0x01,                                 /* ucPhyAddress */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiSck */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiSs */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiMosi */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiMiso */
-      BP_NOT_DEFINED,                       /* usGpioPhyReset */
-      0x01,                                 /* numSwitchPorts */
-      BP_ENET_CONFIG_MDIO,                  /* usConfigType */
-      BP_NOT_DEFINED},                      /* usReverseMii */
-     {BP_ENET_NO_PHY,                       /* ucPhyType */
-      0x00,                                 /* ucPhyAddress */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiSck */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiSs */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiMosi */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiMiso */
-      BP_NOT_DEFINED,                       /* usGpioPhyReset */
-      0x01,                                 /* numSwitchPorts */
-      BP_ENET_CONFIG_SPI_SSB_1,             /* usConfigType */
-      BP_ENET_REVERSE_MII}},                /* usReverseMii */
-    {{BP_VOIP_DSP,                          /* ucDspType */
-      0x00,                                 /* ucDspAddress */
-      BP_EXT_INTR_2,                        /* usExtIntrVoip */
-      BP_GPIO_36_AH,                        /* usGpioVoipReset */
-      BP_GPIO_34_AL,                        /* usGpioVoipIntr */
-      BP_NOT_DEFINED,                       /* usGpioLedVoip */
-      BP_CS_2},                             /* usCsVoip */
-     {BP_VOIP_NO_DSP}},                     /* ucDspType */
-    BP_MEMORY_16MB_2_CHIP,                  /* usSdramSize */
-    BP_PSI_DEFAULT_SIZE,                    /* usPsiSize */
-    BP_NOT_DEFINED,                         /* usGpioRj11InnerPair */
-    BP_NOT_DEFINED,                         /* usGpioRj11OuterPair */
-    BP_GPIO_33_AL,                          /* usGpioPressAndHoldReset */
-    BP_NOT_DEFINED,                         /* usGpioPcmciaReset */
-    BP_NOT_DEFINED,                         /* usGpioUartRts */
-    BP_NOT_DEFINED,                         /* usGpioUartCts */
-    BP_NOT_DEFINED,                         /* usGpioLedAdsl */
-    BP_GPIO_2_AL,                           /* usGpioLedAdslFail */
-    BP_NOT_DEFINED,                         /* usGpioLedWireless */
-    BP_NOT_DEFINED,                         /* usGpioLedUsb */
-    BP_NOT_DEFINED,                         /* usGpioLedHpna */
-    BP_GPIO_3_AL,                           /* usGpioLedWanData */
-    BP_GPIO_3_AL,                           /* usGpioLedPpp */
-    BP_GPIO_4_AL,                           /* usGpioLedPppFail */
-    BP_GPIO_0_AL,                           /* usGpioLedBlPowerOn */
-    BP_NOT_DEFINED,                         /* usGpioLedBlAlarm */
-    BP_GPIO_3_AL,                           /* usGpioLedBlResetCfg */
-    BP_GPIO_1_AL,                           /* usGpioLedBlStop */
-    BP_NOT_DEFINED,                         /* usExtIntrWireless */
-    BP_NOT_DEFINED,                         /* usExtIntrAdslDyingGasp */
-    BP_NOT_DEFINED,                         /* usExtIntrHpna */
-    BP_NOT_DEFINED,                         /* usCsHpna */
-    BP_NOT_DEFINED,                         /* usAntInUseWireless */
-    BP_NOT_DEFINED,                         /* usGpioSesBtnWireless */
-    BP_NOT_DEFINED,                         /* usExtIntrSesBtnWireless */
-    BP_NOT_DEFINED                          /* usGpioLedSesWireless */
-};
-
-static PBOARD_PARAMETERS g_BoardParms[] =
-    {&g_bcm96348r, &g_bcm96348lv, &g_bcm96348gw, &g_bcm96348gw_10,
-     &g_bcm96348gw_11, &g_bcm96348sv, &g_bcm96348gw_dualDsp,
-     &g_bcmCustom_01, 0};
-#endif
-
-static PBOARD_PARAMETERS g_pCurrentBp = 0;
-
-/**************************************************************************
- * Name       : bpstrcmp
- *
- * Description: String compare for this file so it does not depend on an OS.
- *              (Linux kernel and CFE share this source file.)
- *
- * Parameters : [IN] dest - destination string
- *              [IN] src - source string
- *
- * Returns    : -1 - dest < src, 1 - dest > src, 0 dest == src
- ***************************************************************************/
-static int bpstrcmp(const char *dest,const char *src);
-static int bpstrcmp(const char *dest,const char *src)
-{
-    while (*src && *dest)
-    {
-        if (*dest < *src) return -1;
-        if (*dest > *src) return 1;
-        dest++;
-        src++;
-    }
-
-    if (*dest && !*src) return 1;
-    if (!*dest && *src) return -1;
-    return 0;
-} /* bpstrcmp */
-
-/**************************************************************************
- * Name       : BpGetVoipDspConfig
- *
- * Description: Gets the DSP configuration from the board parameter
- *              structure for a given DSP index.
- *
- * Parameters : [IN] dspNum - DSP index (number)
- *
- * Returns    : Pointer to DSP configuration block if found/valid, NULL
- *              otherwise.
- ***************************************************************************/
-VOIP_DSP_INFO *BpGetVoipDspConfig( unsigned char dspNum );
-VOIP_DSP_INFO *BpGetVoipDspConfig( unsigned char dspNum )
-{
-    VOIP_DSP_INFO *pDspConfig = 0;
-    int i;
-
-    if( g_pCurrentBp )
-    {
-        for( i = 0 ; i < BP_MAX_VOIP_DSP ; i++ )
-        {
-            if( g_pCurrentBp->VoIPDspInfo[i].ucDspType != BP_VOIP_NO_DSP &&
-                g_pCurrentBp->VoIPDspInfo[i].ucDspAddress == dspNum )
-            {
-                pDspConfig = &g_pCurrentBp->VoIPDspInfo[i];
-                break;
-            }
-        }
-    }
-
-    return pDspConfig;
-}
-
-
-/**************************************************************************
- * Name       : BpSetBoardId
- *
- * Description: This function find the BOARD_PARAMETERS structure for the
- *              specified board id string and assigns it to a global, static
- *              variable.
- *
- * Parameters : [IN] pszBoardId - Board id string that is saved into NVRAM.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_FOUND - Error, board id input string does not
- *                  have a board parameters configuration record.
- ***************************************************************************/
-int BpSetBoardId( char *pszBoardId )
-{
-    int nRet = BP_BOARD_ID_NOT_FOUND;
-    PBOARD_PARAMETERS *ppBp;
-
-    for( ppBp = g_BoardParms; *ppBp; ppBp++ )
-    {
-        if( !bpstrcmp((*ppBp)->szBoardId, pszBoardId) )
-        {
-            g_pCurrentBp = *ppBp;
-            nRet = BP_SUCCESS;
-            break;
-        }
-    }
-
-    return( nRet );
-} /* BpSetBoardId */
-
-/**************************************************************************
- * Name       : BpGetBoardIds
- *
- * Description: This function returns all of the supported board id strings.
- *
- * Parameters : [OUT] pszBoardIds - Address of a buffer that the board id
- *                  strings are returned in.  Each id starts at BP_BOARD_ID_LEN
- *                  boundary.
- *              [IN] nBoardIdsSize - Number of BP_BOARD_ID_LEN elements that
- *                  were allocated in pszBoardIds.
- *
- * Returns    : Number of board id strings returned.
- ***************************************************************************/
-int BpGetBoardIds( char *pszBoardIds, int nBoardIdsSize )
-{
-    PBOARD_PARAMETERS *ppBp;
-    int i;
-    char *src;
-    char *dest;
-
-    for( i = 0, ppBp = g_BoardParms; *ppBp && nBoardIdsSize;
-        i++, ppBp++, nBoardIdsSize--, pszBoardIds += BP_BOARD_ID_LEN )
-    {
-        dest = pszBoardIds;
-        src = (*ppBp)->szBoardId;
-        while( *src )
-            *dest++ = *src++;
-        *dest = '\0';
-    }
-
-    return( i );
-} /* BpGetBoardIds */
-
-/**************************************************************************
- * Name       : BpGetEthernetMacInfo
- *
- * Description: This function returns all of the supported board id strings.
- *
- * Parameters : [OUT] pEnetInfos - Address of an array of ETHERNET_MAC_INFO
- *                  buffers.
- *              [IN] nNumEnetInfos - Number of ETHERNET_MAC_INFO elements that
- *                  are pointed to by pEnetInfos.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- ***************************************************************************/
-int BpGetEthernetMacInfo( PETHERNET_MAC_INFO pEnetInfos, int nNumEnetInfos )
-{
-    int i, nRet;
-
-    if( g_pCurrentBp )
-    {
-        for( i = 0; i < nNumEnetInfos; i++, pEnetInfos++ )
-        {
-            if( i < BP_MAX_ENET_MACS )
-            {
-                unsigned char *src = (unsigned char *)
-                    &g_pCurrentBp->EnetMacInfos[i];
-                unsigned char *dest = (unsigned char *) pEnetInfos;
-                int len = sizeof(ETHERNET_MAC_INFO);
-                while( len-- )
-                    *dest++ = *src++;
-            }
-            else
-                pEnetInfos->ucPhyType = BP_ENET_NO_PHY;
-        }
-
-        nRet = BP_SUCCESS;
-    }
-    else
-    {
-        for( i = 0; i < nNumEnetInfos; i++, pEnetInfos++ )
-            pEnetInfos->ucPhyType = BP_ENET_NO_PHY;
-
-        nRet = BP_BOARD_ID_NOT_SET;
-    }
-
-    return( nRet );
-} /* BpGetEthernetMacInfo */
-
-/**************************************************************************
- * Name       : BpGetSdramSize
- *
- * Description: This function returns a constant that describees the board's
- *              SDRAM type and size.
- *
- * Parameters : [OUT] pulSdramSize - Address of short word that the SDRAM size
- *                  is returned in.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- ***************************************************************************/
-int BpGetSdramSize( unsigned long *pulSdramSize )
-{
-    int nRet;
-
-    if( g_pCurrentBp )
-    {
-        *pulSdramSize = g_pCurrentBp->usSdramSize;
-        nRet = BP_SUCCESS;
-    }
-    else
-    {
-        *pulSdramSize = BP_NOT_DEFINED;
-        nRet = BP_BOARD_ID_NOT_SET;
-    }
-
-    return( nRet );
-} /* BpGetSdramSize */
-
-/**************************************************************************
- * Name       : BpGetPsiSize
- *
- * Description: This function returns the persistent storage size in K bytes.
- *
- * Parameters : [OUT] pulPsiSize - Address of short word that the persistent
- *                  storage size is returned in.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- ***************************************************************************/
-int BpGetPsiSize( unsigned long *pulPsiSize )
-{
-    int nRet;
-
-    if( g_pCurrentBp )
-    {
-        *pulPsiSize = g_pCurrentBp->usPsiSize;
-        nRet = BP_SUCCESS;
-    }
-    else
-    {
-        *pulPsiSize = BP_NOT_DEFINED;
-        nRet = BP_BOARD_ID_NOT_SET;
-    }
-
-    return( nRet );
-} /* BpGetPsiSize */
-
-/**************************************************************************
- * Name       : BpGetRj11InnerOuterPairGpios
- *
- * Description: This function returns the GPIO pin assignments for changing
- *              between the RJ11 inner pair and RJ11 outer pair.
- *
- * Parameters : [OUT] pusInner - Address of short word that the RJ11 inner pair
- *                  GPIO pin is returned in.
- *              [OUT] pusOuter - Address of short word that the RJ11 outer pair
- *                  GPIO pin is returned in.
- *
- * Returns    : BP_SUCCESS - Success, values are returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetRj11InnerOuterPairGpios( unsigned short *pusInner,
-    unsigned short *pusOuter )
-{
-    int nRet;
-
-    if( g_pCurrentBp )
-    {
-        *pusInner = g_pCurrentBp->usGpioRj11InnerPair;
-        *pusOuter = g_pCurrentBp->usGpioRj11OuterPair;
-
-        if( g_pCurrentBp->usGpioRj11InnerPair != BP_NOT_DEFINED &&
-            g_pCurrentBp->usGpioRj11OuterPair != BP_NOT_DEFINED )
-        {
-            nRet = BP_SUCCESS;
-        }
-        else
-        {
-            nRet = BP_VALUE_NOT_DEFINED;
-        }
-    }
-    else
-    {
-        *pusInner = *pusOuter = BP_NOT_DEFINED;
-        nRet = BP_BOARD_ID_NOT_SET;
-    }
-
-    return( nRet );
-} /* BpGetRj11InnerOuterPairGpios */
-
-/**************************************************************************
- * Name       : BpGetPressAndHoldResetGpio
- *
- * Description: This function returns the GPIO pin assignment for the press
- *              and hold reset button.
- *
- * Parameters : [OUT] pusValue - Address of short word that the press and hold
- *                  reset button GPIO pin is returned in.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetPressAndHoldResetGpio( unsigned short *pusValue )
-{
-    int nRet;
-
-    if( g_pCurrentBp )
-    {
-        *pusValue = g_pCurrentBp->usGpioPressAndHoldReset;
-
-        if( g_pCurrentBp->usGpioPressAndHoldReset != BP_NOT_DEFINED )
-        {
-            nRet = BP_SUCCESS;
-        }
-        else
-        {
-            nRet = BP_VALUE_NOT_DEFINED;
-        }
-    }
-    else
-    {
-        *pusValue = BP_NOT_DEFINED;
-        nRet = BP_BOARD_ID_NOT_SET;
-    }
-
-    return( nRet );
-} /* BpGetPressAndHoldResetGpio */
-
-/**************************************************************************
- * Name       : BpGetVoipResetGpio
- *
- * Description: This function returns the GPIO pin assignment for the VOIP
- *              Reset operation.
- *
- * Parameters : [OUT] pusValue - Address of short word that the VOIP reset
- *                  GPIO pin is returned in.
- *              [IN] dspNum - Address of the DSP to query.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetVoipResetGpio( unsigned char dspNum, unsigned short *pusValue )
-{
-    int nRet;
-
-    if( g_pCurrentBp )
-    {
-        VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( dspNum );
-
-        if( pDspInfo )
-        {
-           *pusValue = pDspInfo->usGpioVoipReset;
-
-           if( *pusValue != BP_NOT_DEFINED ||
-               *pusValue == BP_UNEQUIPPED )
-           {
-              nRet = BP_SUCCESS;
-           }
-           else
-           {
-              nRet = BP_VALUE_NOT_DEFINED;
-           }
-        }
-        else
-        {
-           *pusValue = BP_NOT_DEFINED;
-           nRet = BP_BOARD_ID_NOT_FOUND;
-        }
-    }
-    else
-    {
-        *pusValue = BP_NOT_DEFINED;
-        nRet = BP_BOARD_ID_NOT_SET;
-    }
-
-    return( nRet );
-} /* BpGetVoipResetGpio */
-
-/**************************************************************************
- * Name       : BpGetVoipIntrGpio
- *
- * Description: This function returns the GPIO pin assignment for VoIP interrupt.
- *
- * Parameters : [OUT] pusValue - Address of short word that the VOIP interrupt
- *                  GPIO pin is returned in.
- *              [IN] dspNum - Address of the DSP to query.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetVoipIntrGpio( unsigned char dspNum, unsigned short *pusValue )
-{
-    int nRet;
-
-    if( g_pCurrentBp )
-    {
-        VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( dspNum );
-
-        if( pDspInfo )
-        {
-           *pusValue = pDspInfo->usGpioVoipIntr;
-
-           if( *pusValue != BP_NOT_DEFINED )
-           {
-              nRet = BP_SUCCESS;
-           }
-           else
-           {
-              nRet = BP_VALUE_NOT_DEFINED;
-           }
-        }
-        else
-        {
-           *pusValue = BP_NOT_DEFINED;
-           nRet = BP_BOARD_ID_NOT_FOUND;
-        }
-    }
-    else
-    {
-        *pusValue = BP_NOT_DEFINED;
-        nRet = BP_BOARD_ID_NOT_SET;
-    }
-
-    return( nRet );
-} /* BpGetVoipIntrGpio */
-
-/**************************************************************************
- * Name       : BpGetPcmciaResetGpio
- *
- * Description: This function returns the GPIO pin assignment for the PCMCIA
- *              Reset operation.
- *
- * Parameters : [OUT] pusValue - Address of short word that the PCMCIA reset
- *                  GPIO pin is returned in.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetPcmciaResetGpio( unsigned short *pusValue )
-{
-    int nRet;
-
-    if( g_pCurrentBp )
-    {
-        *pusValue = g_pCurrentBp->usGpioPcmciaReset;
-
-        if( g_pCurrentBp->usGpioPcmciaReset != BP_NOT_DEFINED )
-        {
-            nRet = BP_SUCCESS;
-        }
-        else
-        {
-            nRet = BP_VALUE_NOT_DEFINED;
-        }
-    }
-    else
-    {
-        *pusValue = BP_NOT_DEFINED;
-        nRet = BP_BOARD_ID_NOT_SET;
-    }
-
-    return( nRet );
-} /* BpGetPcmciaResetGpio */
-
-/**************************************************************************
- * Name       : BpGetUartRtsCtsGpios
- *
- * Description: This function returns the GPIO pin assignments for RTS and CTS
- *              UART signals.
- *
- * Parameters : [OUT] pusRts - Address of short word that the UART RTS GPIO
- *                  pin is returned in.
- *              [OUT] pusCts - Address of short word that the UART CTS GPIO
- *                  pin is returned in.
- *
- * Returns    : BP_SUCCESS - Success, values are returned.
- *              BP_BOARD_ID_NOT_SET - Error, board id input string does not
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetRtsCtsUartGpios( unsigned short *pusRts, unsigned short *pusCts )
-{
-    int nRet;
-
-    if( g_pCurrentBp )
-    {
-        *pusRts = g_pCurrentBp->usGpioUartRts;
-        *pusCts = g_pCurrentBp->usGpioUartCts;
-
-        if( g_pCurrentBp->usGpioUartRts != BP_NOT_DEFINED &&
-            g_pCurrentBp->usGpioUartCts != BP_NOT_DEFINED )
-        {
-            nRet = BP_SUCCESS;
-        }
-        else
-        {
-            nRet = BP_VALUE_NOT_DEFINED;
-        }
-    }
-    else
-    {
-        *pusRts = *pusCts = BP_NOT_DEFINED;
-        nRet = BP_BOARD_ID_NOT_SET;
-    }
-
-    return( nRet );
-} /* BpGetUartRtsCtsGpios */
-
-/**************************************************************************
- * Name       : BpGetAdslLedGpio
- *
- * Description: This function returns the GPIO pin assignment for the ADSL
- *              LED.
- *
- * Parameters : [OUT] pusValue - Address of short word that the ADSL LED
- *                  GPIO pin is returned in.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetAdslLedGpio( unsigned short *pusValue )
-{
-    int nRet;
-
-    if( g_pCurrentBp )
-    {
-        *pusValue = g_pCurrentBp->usGpioLedAdsl;
-
-        if( g_pCurrentBp->usGpioLedAdsl != BP_NOT_DEFINED )
-        {
-            nRet = BP_SUCCESS;
-        }
-        else
-        {
-            nRet = BP_VALUE_NOT_DEFINED;
-        }
-    }
-    else
-    {
-        *pusValue = BP_NOT_DEFINED;
-        nRet = BP_BOARD_ID_NOT_SET;
-    }
-
-    return( nRet );
-} /* BpGetAdslLedGpio */
-
-/**************************************************************************
- * Name       : BpGetAdslFailLedGpio
- *
- * Description: This function returns the GPIO pin assignment for the ADSL
- *              LED that is used when there is a DSL connection failure.
- *
- * Parameters : [OUT] pusValue - Address of short word that the ADSL LED
- *                  GPIO pin is returned in.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetAdslFailLedGpio( unsigned short *pusValue )
-{
-    int nRet;
-
-    if( g_pCurrentBp )
-    {
-        *pusValue = g_pCurrentBp->usGpioLedAdslFail;
-
-        if( g_pCurrentBp->usGpioLedAdslFail != BP_NOT_DEFINED )
-        {
-            nRet = BP_SUCCESS;
-        }
-        else
-        {
-            nRet = BP_VALUE_NOT_DEFINED;
-        }
-    }
-    else
-    {
-        *pusValue = BP_NOT_DEFINED;
-        nRet = BP_BOARD_ID_NOT_SET;
-    }
-
-    return( nRet );
-} /* BpGetAdslFailLedGpio */
-
-/**************************************************************************
- * Name       : BpGetWirelessLedGpio
- *
- * Description: This function returns the GPIO pin assignment for the Wireless
- *              LED.
- *
- * Parameters : [OUT] pusValue - Address of short word that the Wireless LED
- *                  GPIO pin is returned in.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetWirelessLedGpio( unsigned short *pusValue )
-{
-    int nRet;
-
-    if( g_pCurrentBp )
-    {
-        *pusValue = g_pCurrentBp->usGpioLedWireless;
-
-        if( g_pCurrentBp->usGpioLedWireless != BP_NOT_DEFINED )
-        {
-            nRet = BP_SUCCESS;
-        }
-        else
-        {
-            nRet = BP_VALUE_NOT_DEFINED;
-        }
-    }
-    else
-    {
-        *pusValue = BP_NOT_DEFINED;
-        nRet = BP_BOARD_ID_NOT_SET;
-    }
-
-    return( nRet );
-} /* BpGetWirelessLedGpio */
-
-/**************************************************************************
- * Name       : BpGetWirelessAntInUse
- *
- * Description: This function returns the antennas in use for wireless
- *
- * Parameters : [OUT] pusValue - Address of short word that the Wireless Antenna
- *                  is in use.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetWirelessAntInUse( unsigned short *pusValue )
-{
-    int nRet;
-
-    if( g_pCurrentBp )
-    {
-        *pusValue = g_pCurrentBp->usAntInUseWireless;
-
-        if( g_pCurrentBp->usAntInUseWireless != BP_NOT_DEFINED )
-        {
-            nRet = BP_SUCCESS;
-        }
-        else
-        {
-            nRet = BP_VALUE_NOT_DEFINED;
-        }
-    }
-    else
-    {
-        *pusValue = BP_NOT_DEFINED;
-        nRet = BP_BOARD_ID_NOT_SET;
-    }
-
-    return( nRet );	
-} /* BpGetWirelessAntInUse */
-
-/**************************************************************************
- * Name       : BpGetWirelessSesBtnGpio
- *
- * Description: This function returns the GPIO pin assignment for the Wireless
- *              Ses Button.
- *
- * Parameters : [OUT] pusValue - Address of short word that the Wireless LED
- *                  GPIO pin is returned in.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetWirelessSesBtnGpio( unsigned short *pusValue )
-{
-    int nRet;
-
-    if( g_pCurrentBp )
-    {
-        *pusValue = g_pCurrentBp->usGpioSesBtnWireless;
-
-        if( g_pCurrentBp->usGpioSesBtnWireless != BP_NOT_DEFINED )
-        {
-            nRet = BP_SUCCESS;
-        }
-        else
-        {
-            nRet = BP_VALUE_NOT_DEFINED;
-        }
-    }
-    else
-    {
-        *pusValue = BP_NOT_DEFINED;
-        nRet = BP_BOARD_ID_NOT_SET;
-    }
-
-    return( nRet );	
-} /* BpGetWirelessSesBtnGpio */
-
-/**************************************************************************
- * Name       : BpGetWirelessSesExtIntr
- *
- * Description: This function returns the external interrupt number for the 
- *              Wireless Ses Button.
- *
- * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses
- *                  external interrup is returned in.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetWirelessSesExtIntr( unsigned short *pusValue )
-{
-    int nRet;
-
-    if( g_pCurrentBp )
-    {
-        *pusValue = g_pCurrentBp->usExtIntrSesBtnWireless;
-
-        if( g_pCurrentBp->usExtIntrSesBtnWireless != BP_NOT_DEFINED )
-        {
-            nRet = BP_SUCCESS;
-        }
-        else
-        {
-            nRet = BP_VALUE_NOT_DEFINED;
-        }
-    }
-    else
-    {
-        *pusValue = BP_NOT_DEFINED;
-        nRet = BP_BOARD_ID_NOT_SET;
-    }
-
-    return( nRet );	
-		
-} /* BpGetWirelessSesExtIntr */
-
-/**************************************************************************
- * Name       : BpGetWirelessSesLedGpio
- *
- * Description: This function returns the GPIO pin assignment for the Wireless
- *              Ses Led.
- *
- * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses
- *                  Led GPIO pin is returned in.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetWirelessSesLedGpio( unsigned short *pusValue )
-{
-    int nRet;
-
-    if( g_pCurrentBp )
-    {
-        *pusValue = g_pCurrentBp->usGpioLedSesWireless;
-
-        if( g_pCurrentBp->usGpioLedSesWireless != BP_NOT_DEFINED )
-        {
-            nRet = BP_SUCCESS;
-        }
-        else
-        {
-            nRet = BP_VALUE_NOT_DEFINED;
-        }
-    }
-    else
-    {
-        *pusValue = BP_NOT_DEFINED;
-        nRet = BP_BOARD_ID_NOT_SET;
-    }
-
-    return( nRet );
-	
-} /* BpGetWirelessSesLedGpio */
-
-/**************************************************************************
- * Name       : BpGetUsbLedGpio
- *
- * Description: This function returns the GPIO pin assignment for the USB
- *              LED.
- *
- * Parameters : [OUT] pusValue - Address of short word that the USB LED
- *                  GPIO pin is returned in.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetUsbLedGpio( unsigned short *pusValue )
-{
-    int nRet;
-
-    if( g_pCurrentBp )
-    {
-        *pusValue = g_pCurrentBp->usGpioLedUsb;
-
-        if( g_pCurrentBp->usGpioLedUsb != BP_NOT_DEFINED )
-        {
-            nRet = BP_SUCCESS;
-        }
-        else
-        {
-            nRet = BP_VALUE_NOT_DEFINED;
-        }
-    }
-    else
-    {
-        *pusValue = BP_NOT_DEFINED;
-        nRet = BP_BOARD_ID_NOT_SET;
-    }
-
-    return( nRet );
-} /* BpGetUsbLedGpio */
-
-/**************************************************************************
- * Name       : BpGetHpnaLedGpio
- *
- * Description: This function returns the GPIO pin assignment for the HPNA
- *              LED.
- *
- * Parameters : [OUT] pusValue - Address of short word that the HPNA LED
- *                  GPIO pin is returned in.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetHpnaLedGpio( unsigned short *pusValue )
-{
-    int nRet;
-
-    if( g_pCurrentBp )
-    {
-        *pusValue = g_pCurrentBp->usGpioLedHpna;
-
-        if( g_pCurrentBp->usGpioLedHpna != BP_NOT_DEFINED )
-        {
-            nRet = BP_SUCCESS;
-        }
-        else
-        {
-            nRet = BP_VALUE_NOT_DEFINED;
-        }
-    }
-    else
-    {
-        *pusValue = BP_NOT_DEFINED;
-        nRet = BP_BOARD_ID_NOT_SET;
-    }
-
-    return( nRet );
-} /* BpGetHpnaLedGpio */
-
-/**************************************************************************
- * Name       : BpGetWanDataLedGpio
- *
- * Description: This function returns the GPIO pin assignment for the WAN Data
- *              LED.
- *
- * Parameters : [OUT] pusValue - Address of short word that the WAN Data LED
- *                  GPIO pin is returned in.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetWanDataLedGpio( unsigned short *pusValue )
-{
-    int nRet;
-
-    if( g_pCurrentBp )
-    {
-        *pusValue = g_pCurrentBp->usGpioLedWanData;
-
-        if( g_pCurrentBp->usGpioLedWanData != BP_NOT_DEFINED )
-        {
-            nRet = BP_SUCCESS;
-        }
-        else
-        {
-            nRet = BP_VALUE_NOT_DEFINED;
-        }
-    }
-    else
-    {
-        *pusValue = BP_NOT_DEFINED;
-        nRet = BP_BOARD_ID_NOT_SET;
-    }
-
-    return( nRet );
-} /* BpGetWanDataLedGpio */
-
-/**************************************************************************
- * Name       : BpGetPppLedGpio
- *
- * Description: This function returns the GPIO pin assignment for the PPP
- *              LED.
- *
- * Parameters : [OUT] pusValue - Address of short word that the PPP LED
- *                  GPIO pin is returned in.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetPppLedGpio( unsigned short *pusValue )
-{
-    int nRet;
-
-    if( g_pCurrentBp )
-    {
-        *pusValue = g_pCurrentBp->usGpioLedPpp;
-
-        if( g_pCurrentBp->usGpioLedPpp != BP_NOT_DEFINED )
-        {
-            nRet = BP_SUCCESS;
-        }
-        else
-        {
-            nRet = BP_VALUE_NOT_DEFINED;
-        }
-    }
-    else
-    {
-        *pusValue = BP_NOT_DEFINED;
-        nRet = BP_BOARD_ID_NOT_SET;
-    }
-
-    return( nRet );
-} /* BpGetPppLedGpio */
-
-/**************************************************************************
- * Name       : BpGetPppFailLedGpio
- *
- * Description: This function returns the GPIO pin assignment for the PPP
- *              LED that is used when there is a PPP connection failure.
- *
- * Parameters : [OUT] pusValue - Address of short word that the PPP LED
- *                  GPIO pin is returned in.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetPppFailLedGpio( unsigned short *pusValue )
-{
-    int nRet;
-
-    if( g_pCurrentBp )
-    {
-        *pusValue = g_pCurrentBp->usGpioLedPppFail;
-
-        if( g_pCurrentBp->usGpioLedPppFail != BP_NOT_DEFINED )
-        {
-            nRet = BP_SUCCESS;
-        }
-        else
-        {
-            nRet = BP_VALUE_NOT_DEFINED;
-        }
-    }
-    else
-    {
-        *pusValue = BP_NOT_DEFINED;
-        nRet = BP_BOARD_ID_NOT_SET;
-    }
-
-    return( nRet );
-} /* BpGetPppFailLedGpio */
-
-/**************************************************************************
- * Name       : BpGetBootloaderPowerOnLedGpio
- *
- * Description: This function returns the GPIO pin assignment for the power
- *              on LED that is set by the bootloader.
- *
- * Parameters : [OUT] pusValue - Address of short word that the alarm LED
- *                  GPIO pin is returned in.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetBootloaderPowerOnLedGpio( unsigned short *pusValue )
-{
-    int nRet;
-
-    if( g_pCurrentBp )
-    {
-        *pusValue = g_pCurrentBp->usGpioLedBlPowerOn;
-
-        if( g_pCurrentBp->usGpioLedBlPowerOn != BP_NOT_DEFINED )
-        {
-            nRet = BP_SUCCESS;
-        }
-        else
-        {
-            nRet = BP_VALUE_NOT_DEFINED;
-        }
-    }
-    else
-    {
-        *pusValue = BP_NOT_DEFINED;
-        nRet = BP_BOARD_ID_NOT_SET;
-    }
-
-    return( nRet );
-} /* BpGetBootloaderPowerOn */
-
-/**************************************************************************
- * Name       : BpGetBootloaderAlarmLedGpio
- *
- * Description: This function returns the GPIO pin assignment for the alarm
- *              LED that is set by the bootloader.
- *
- * Parameters : [OUT] pusValue - Address of short word that the alarm LED
- *                  GPIO pin is returned in.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetBootloaderAlarmLedGpio( unsigned short *pusValue )
-{
-    int nRet;
-
-    if( g_pCurrentBp )
-    {
-        *pusValue = g_pCurrentBp->usGpioLedBlAlarm;
-
-        if( g_pCurrentBp->usGpioLedBlAlarm != BP_NOT_DEFINED )
-        {
-            nRet = BP_SUCCESS;
-        }
-        else
-        {
-            nRet = BP_VALUE_NOT_DEFINED;
-        }
-    }
-    else
-    {
-        *pusValue = BP_NOT_DEFINED;
-        nRet = BP_BOARD_ID_NOT_SET;
-    }
-
-    return( nRet );
-} /* BpGetBootloaderAlarmLedGpio */
-
-/**************************************************************************
- * Name       : BpGetBootloaderResetCfgLedGpio
- *
- * Description: This function returns the GPIO pin assignment for the reset
- *              configuration LED that is set by the bootloader.
- *
- * Parameters : [OUT] pusValue - Address of short word that the reset
- *                  configuration LED GPIO pin is returned in.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetBootloaderResetCfgLedGpio( unsigned short *pusValue )
-{
-    int nRet;
-
-    if( g_pCurrentBp )
-    {
-        *pusValue = g_pCurrentBp->usGpioLedBlResetCfg;
-
-        if( g_pCurrentBp->usGpioLedBlResetCfg != BP_NOT_DEFINED )
-        {
-            nRet = BP_SUCCESS;
-        }
-        else
-        {
-            nRet = BP_VALUE_NOT_DEFINED;
-        }
-    }
-    else
-    {
-        *pusValue = BP_NOT_DEFINED;
-        nRet = BP_BOARD_ID_NOT_SET;
-    }
-
-    return( nRet );
-} /* BpGetBootloaderResetCfgLedGpio */
-
-/**************************************************************************
- * Name       : BpGetBootloaderStopLedGpio
- *
- * Description: This function returns the GPIO pin assignment for the break
- *              into bootloader LED that is set by the bootloader.
- *
- * Parameters : [OUT] pusValue - Address of short word that the break into
- *                  bootloader LED GPIO pin is returned in.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetBootloaderStopLedGpio( unsigned short *pusValue )
-{
-    int nRet;
-
-    if( g_pCurrentBp )
-    {
-        *pusValue = g_pCurrentBp->usGpioLedBlStop;
-
-        if( g_pCurrentBp->usGpioLedBlStop != BP_NOT_DEFINED )
-        {
-            nRet = BP_SUCCESS;
-        }
-        else
-        {
-            nRet = BP_VALUE_NOT_DEFINED;
-        }
-    }
-    else
-    {
-        *pusValue = BP_NOT_DEFINED;
-        nRet = BP_BOARD_ID_NOT_SET;
-    }
-
-    return( nRet );
-} /* BpGetBootloaderStopLedGpio */
-
-/**************************************************************************
- * Name       : BpGetVoipLedGpio
- *
- * Description: This function returns the GPIO pin assignment for the VOIP
- *              LED.
- *
- * Parameters : [OUT] pusValue - Address of short word that the VOIP LED
- *                  GPIO pin is returned in.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- *
- * Note       : The VoIP structure would allow for having one LED per DSP
- *              however, the board initialization function assumes only one
- *              LED per functionality (ie one LED for VoIP).  Therefore in
- *              order to keep this tidy and simple we do not make usage of the
- *              one-LED-per-DSP function.  Instead, we assume that the LED for
- *              VoIP is unique and associated with DSP 0 (always present on
- *              any VoIP platform).  If changing this to a LED-per-DSP function
- *              then one need to update the board initialization driver in
- *              bcmdrivers\opensource\char\board\bcm963xx\impl1
- ***************************************************************************/
-int BpGetVoipLedGpio( unsigned short *pusValue )
-{
-    int nRet;
-
-    if( g_pCurrentBp )
-    {
-        VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( 0 );
-
-        if( pDspInfo )
-        {
-           *pusValue = pDspInfo->usGpioLedVoip;
-
-           if( *pusValue != BP_NOT_DEFINED )
-           {
-              nRet = BP_SUCCESS;
-           }
-           else
-           {
-              nRet = BP_VALUE_NOT_DEFINED;
-           }
-        }
-        else
-        {
-           *pusValue = BP_NOT_DEFINED;
-           nRet = BP_BOARD_ID_NOT_FOUND;
-        }
-    }
-    else
-    {
-        *pusValue = BP_NOT_DEFINED;
-        nRet = BP_BOARD_ID_NOT_SET;
-    }
-
-    return( nRet );
-} /* BpGetVoipLedGpio */
-
-/**************************************************************************
- * Name       : BpGetWirelessExtIntr
- *
- * Description: This function returns the Wireless external interrupt number.
- *
- * Parameters : [OUT] pulValue - Address of short word that the wireless
- *                  external interrupt number is returned in.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetWirelessExtIntr( unsigned long *pulValue )
-{
-    int nRet;
-
-    if( g_pCurrentBp )
-    {
-        *pulValue = g_pCurrentBp->usExtIntrWireless;
-
-        if( g_pCurrentBp->usExtIntrWireless != BP_NOT_DEFINED )
-        {
-            nRet = BP_SUCCESS;
-        }
-        else
-        {
-            nRet = BP_VALUE_NOT_DEFINED;
-        }
-    }
-    else
-    {
-        *pulValue = BP_NOT_DEFINED;
-        nRet = BP_BOARD_ID_NOT_SET;
-    }
-
-    return( nRet );
-} /* BpGetWirelessExtIntr */
-
-/**************************************************************************
- * Name       : BpGetAdslDyingGaspExtIntr
- *
- * Description: This function returns the ADSL Dying Gasp external interrupt
- *              number.
- *
- * Parameters : [OUT] pulValue - Address of short word that the ADSL Dying Gasp
- *                  external interrupt number is returned in.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetAdslDyingGaspExtIntr( unsigned long *pulValue )
-{
-    int nRet;
-
-    if( g_pCurrentBp )
-    {
-        *pulValue = g_pCurrentBp->usExtIntrAdslDyingGasp;
-
-        if( g_pCurrentBp->usExtIntrAdslDyingGasp != BP_NOT_DEFINED )
-        {
-            nRet = BP_SUCCESS;
-        }
-        else
-        {
-            nRet = BP_VALUE_NOT_DEFINED;
-        }
-    }
-    else
-    {
-        *pulValue = BP_NOT_DEFINED;
-        nRet = BP_BOARD_ID_NOT_SET;
-    }
-
-    return( nRet );
-} /* BpGetAdslDyingGaspExtIntr */
-
-/**************************************************************************
- * Name       : BpGetVoipExtIntr
- *
- * Description: This function returns the VOIP external interrupt number.
- *
- * Parameters : [OUT] pulValue - Address of short word that the VOIP
- *                  external interrupt number is returned in.
- *              [IN] dspNum - Address of the DSP to query.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetVoipExtIntr( unsigned char dspNum, unsigned long *pulValue )
-{
-    int nRet;
-
-    if( g_pCurrentBp )
-    {
-        VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( dspNum );
-
-        if( pDspInfo )
-        {
-           *pulValue = pDspInfo->usExtIntrVoip;
-
-           if( *pulValue != BP_NOT_DEFINED )
-           {
-              nRet = BP_SUCCESS;
-           }
-           else
-           {
-              nRet = BP_VALUE_NOT_DEFINED;
-           }
-        }
-        else
-        {
-           *pulValue = BP_NOT_DEFINED;
-           nRet = BP_BOARD_ID_NOT_FOUND;
-        }
-    }
-    else
-    {
-        *pulValue = BP_NOT_DEFINED;
-        nRet = BP_BOARD_ID_NOT_SET;
-    }
-
-    return( nRet );
-} /* BpGetVoipExtIntr */
-
-/**************************************************************************
- * Name       : BpGetHpnaExtIntr
- *
- * Description: This function returns the HPNA external interrupt number.
- *
- * Parameters : [OUT] pulValue - Address of short word that the HPNA
- *                  external interrupt number is returned in.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetHpnaExtIntr( unsigned long *pulValue )
-{
-    int nRet;
-
-    if( g_pCurrentBp )
-    {
-        *pulValue = g_pCurrentBp->usExtIntrHpna;
-
-        if( g_pCurrentBp->usExtIntrHpna != BP_NOT_DEFINED )
-        {
-            nRet = BP_SUCCESS;
-        }
-        else
-        {
-            nRet = BP_VALUE_NOT_DEFINED;
-        }
-    }
-    else
-    {
-        *pulValue = BP_NOT_DEFINED;
-        nRet = BP_BOARD_ID_NOT_SET;
-    }
-
-    return( nRet );
-} /* BpGetHpnaExtIntr */
-
-/**************************************************************************
- * Name       : BpGetHpnaChipSelect
- *
- * Description: This function returns the HPNA chip select number.
- *
- * Parameters : [OUT] pulValue - Address of short word that the HPNA
- *                  chip select number is returned in.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetHpnaChipSelect( unsigned long *pulValue )
-{
-    int nRet;
-
-    if( g_pCurrentBp )
-    {
-        *pulValue = g_pCurrentBp->usCsHpna;
-
-        if( g_pCurrentBp->usCsHpna != BP_NOT_DEFINED )
-        {
-            nRet = BP_SUCCESS;
-        }
-        else
-        {
-            nRet = BP_VALUE_NOT_DEFINED;
-        }
-    }
-    else
-    {
-        *pulValue = BP_NOT_DEFINED;
-        nRet = BP_BOARD_ID_NOT_SET;
-    }
-
-    return( nRet );
-} /* BpGetHpnaChipSelect */
-
-/**************************************************************************
- * Name       : BpGetVoipChipSelect
- *
- * Description: This function returns the VOIP chip select number.
- *
- * Parameters : [OUT] pulValue - Address of short word that the VOIP
- *                  chip select number is returned in.
- *              [IN] dspNum - Address of the DSP to query.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetVoipChipSelect( unsigned char dspNum, unsigned long *pulValue )
-{
-    int nRet;
-
-    if( g_pCurrentBp )
-    {
-        VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( dspNum );
-
-        if( pDspInfo )
-        {
-           *pulValue = pDspInfo->usCsVoip;
-
-           if( *pulValue != BP_NOT_DEFINED )
-           {
-              nRet = BP_SUCCESS;
-           }
-           else
-           {
-              nRet = BP_VALUE_NOT_DEFINED;
-           }
-        }
-        else
-        {
-           *pulValue = BP_NOT_DEFINED;
-           nRet = BP_BOARD_ID_NOT_FOUND;
-        }
-    }
-    else
-    {
-        *pulValue = BP_NOT_DEFINED;
-        nRet = BP_BOARD_ID_NOT_SET;
-    }
-
-    return( nRet );
-} /* BpGetVoipChipSelect */
-
diff --git a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/boardparms.h b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/boardparms.h
deleted file mode 100644
index 08ba24cca..000000000
--- a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/boardparms.h
+++ /dev/null
@@ -1,758 +0,0 @@
-/*
-<:copyright-gpl 
-
- Copyright 2003 Broadcom Corp. All Rights Reserved. 
- 
- This program is free software; you can distribute it and/or modify it 
- under the terms of the GNU General Public License (Version 2) as 
- published by the Free Software Foundation. 
- 
- This program is distributed in the hope it will be useful, but WITHOUT 
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 
- FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License 
- for more details. 
- 
- You should have received a copy of the GNU General Public License along 
- with this program; if not, write to the Free Software Foundation, Inc., 
- 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. 
-
-:>
-*/
-/**************************************************************************
- * File Name  : boardparms.h
- *
- * Description: This file contains definitions and function prototypes for
- *              the BCM63xx board parameter access functions.
- * 
- * Updates    : 07/14/2003  Created.
- ***************************************************************************/
-
-#if !defined(_BOARDPARMS_H)
-#define _BOARDPARMS_H
-
-/* Return codes. */
-#define BP_SUCCESS                              0
-#define BP_BOARD_ID_NOT_FOUND                   1
-#define BP_VALUE_NOT_DEFINED                    2
-#define BP_BOARD_ID_NOT_SET                     3
-
-/* Values for BpGetSdramSize. */
-#define BP_MEMORY_8MB_1_CHIP                    0
-#define BP_MEMORY_16MB_1_CHIP                   1
-#define BP_MEMORY_32MB_1_CHIP                   2
-#define BP_MEMORY_64MB_2_CHIP                   3
-#define BP_MEMORY_32MB_2_CHIP                   4
-#define BP_MEMORY_16MB_2_CHIP                   5
-
-/* Values for EthernetMacInfo PhyType. */
-#define BP_ENET_NO_PHY                          0
-#define BP_ENET_INTERNAL_PHY                    1
-#define BP_ENET_EXTERNAL_PHY                    2
-#define BP_ENET_EXTERNAL_SWITCH                 3
-
-/* Values for EthernetMacInfo Configuration type. */
-#define BP_ENET_CONFIG_MDIO                     0       /* Internal PHY, External PHY, Switch+(no GPIO, no SPI, no MDIO Pseudo phy */
-#define BP_ENET_CONFIG_GPIO                     1       /* Bcm96345GW board + Bcm5325M/E */
-#define BP_ENET_CONFIG_MDIO_PSEUDO_PHY          2       /* Bcm96348GW board + Bcm5325E */
-#define BP_ENET_CONFIG_SPI_SSB_0                3       /* Bcm96348GW board + Bcm5325M/E */
-#define BP_ENET_CONFIG_SPI_SSB_1                4       /* Bcm96348GW board + Bcm5325M/E */
-#define BP_ENET_CONFIG_SPI_SSB_2                5       /* Bcm96348GW board + Bcm5325M/E */
-#define BP_ENET_CONFIG_SPI_SSB_3                6       /* Bcm96348GW board + Bcm5325M/E */
-
-/* Values for EthernetMacInfo Reverse MII. */
-#define BP_ENET_NO_REVERSE_MII                  0
-#define BP_ENET_REVERSE_MII                     1
-
-/* Values for VoIPDSPInfo DSPType. */
-#define BP_VOIP_NO_DSP                          0
-#define BP_VOIP_DSP                             1
-
-
-/* Values for GPIO pin assignments (AH = Active High, AL = Active Low). */
-#define BP_ACTIVE_MASK                          0x8000
-#define BP_ACTIVE_HIGH                          0x0000
-#define BP_ACTIVE_LOW                           0x8000
-#define BP_GPIO_0_AH                            (0  | BP_ACTIVE_HIGH)
-#define BP_GPIO_0_AL                            (0  | BP_ACTIVE_LOW)
-#define BP_GPIO_1_AH                            (1  | BP_ACTIVE_HIGH)
-#define BP_GPIO_1_AL                            (1  | BP_ACTIVE_LOW)
-#define BP_GPIO_2_AH                            (2  | BP_ACTIVE_HIGH)
-#define BP_GPIO_2_AL                            (2  | BP_ACTIVE_LOW)
-#define BP_GPIO_3_AH                            (3  | BP_ACTIVE_HIGH)
-#define BP_GPIO_3_AL                            (3  | BP_ACTIVE_LOW)
-#define BP_GPIO_4_AH                            (4  | BP_ACTIVE_HIGH)
-#define BP_GPIO_4_AL                            (4  | BP_ACTIVE_LOW)
-#define BP_GPIO_5_AH                            (5  | BP_ACTIVE_HIGH)
-#define BP_GPIO_5_AL                            (5  | BP_ACTIVE_LOW)
-#define BP_GPIO_6_AH                            (6  | BP_ACTIVE_HIGH)
-#define BP_GPIO_6_AL                            (6  | BP_ACTIVE_LOW)
-#define BP_GPIO_7_AH                            (7  | BP_ACTIVE_HIGH)
-#define BP_GPIO_7_AL                            (7  | BP_ACTIVE_LOW)
-#define BP_GPIO_8_AH                            (8  | BP_ACTIVE_HIGH)
-#define BP_GPIO_8_AL                            (8  | BP_ACTIVE_LOW)
-#define BP_GPIO_9_AH                            (9  | BP_ACTIVE_HIGH)
-#define BP_GPIO_9_AL                            (9  | BP_ACTIVE_LOW)
-#define BP_GPIO_10_AH                           (10 | BP_ACTIVE_HIGH)
-#define BP_GPIO_10_AL                           (10 | BP_ACTIVE_LOW)
-#define BP_GPIO_11_AH                           (11 | BP_ACTIVE_HIGH)
-#define BP_GPIO_11_AL                           (11 | BP_ACTIVE_LOW)
-#define BP_GPIO_12_AH                           (12 | BP_ACTIVE_HIGH)
-#define BP_GPIO_12_AL                           (12 | BP_ACTIVE_LOW)
-#define BP_GPIO_13_AH                           (13 | BP_ACTIVE_HIGH)
-#define BP_GPIO_13_AL                           (13 | BP_ACTIVE_LOW)
-#define BP_GPIO_14_AH                           (14 | BP_ACTIVE_HIGH)
-#define BP_GPIO_14_AL                           (14 | BP_ACTIVE_LOW)
-#define BP_GPIO_15_AH                           (15 | BP_ACTIVE_HIGH)
-#define BP_GPIO_15_AL                           (15 | BP_ACTIVE_LOW)
-#define BP_GPIO_16_AH                           (16 | BP_ACTIVE_HIGH)
-#define BP_GPIO_16_AL                           (16 | BP_ACTIVE_LOW)
-#define BP_GPIO_17_AH                           (17 | BP_ACTIVE_HIGH)
-#define BP_GPIO_17_AL                           (17 | BP_ACTIVE_LOW)
-#define BP_GPIO_18_AH                           (18 | BP_ACTIVE_HIGH)
-#define BP_GPIO_18_AL                           (18 | BP_ACTIVE_LOW)
-#define BP_GPIO_19_AH                           (19 | BP_ACTIVE_HIGH)
-#define BP_GPIO_19_AL                           (19 | BP_ACTIVE_LOW)
-#define BP_GPIO_20_AH                           (20 | BP_ACTIVE_HIGH)
-#define BP_GPIO_20_AL                           (20 | BP_ACTIVE_LOW)
-#define BP_GPIO_21_AH                           (21 | BP_ACTIVE_HIGH)
-#define BP_GPIO_21_AL                           (21 | BP_ACTIVE_LOW)
-#define BP_GPIO_22_AH                           (22 | BP_ACTIVE_HIGH)
-#define BP_GPIO_22_AL                           (22 | BP_ACTIVE_LOW)
-#define BP_GPIO_23_AH                           (23 | BP_ACTIVE_HIGH)
-#define BP_GPIO_23_AL                           (23 | BP_ACTIVE_LOW)
-#define BP_GPIO_24_AH                           (24 | BP_ACTIVE_HIGH)
-#define BP_GPIO_24_AL                           (24 | BP_ACTIVE_LOW)
-#define BP_GPIO_25_AH                           (25 | BP_ACTIVE_HIGH)
-#define BP_GPIO_25_AL                           (25 | BP_ACTIVE_LOW)
-#define BP_GPIO_26_AH                           (26 | BP_ACTIVE_HIGH)
-#define BP_GPIO_26_AL                           (26 | BP_ACTIVE_LOW)
-#define BP_GPIO_27_AH                           (27 | BP_ACTIVE_HIGH)
-#define BP_GPIO_27_AL                           (27 | BP_ACTIVE_LOW)
-#define BP_GPIO_28_AH                           (28 | BP_ACTIVE_HIGH)
-#define BP_GPIO_28_AL                           (28 | BP_ACTIVE_LOW)
-#define BP_GPIO_29_AH                           (29 | BP_ACTIVE_HIGH)
-#define BP_GPIO_29_AL                           (29 | BP_ACTIVE_LOW)
-#define BP_GPIO_30_AH                           (30 | BP_ACTIVE_HIGH)
-#define BP_GPIO_30_AL                           (30 | BP_ACTIVE_LOW)
-#define BP_GPIO_31_AH                           (31 | BP_ACTIVE_HIGH)
-#define BP_GPIO_31_AL                           (31 | BP_ACTIVE_LOW)
-#define BP_GPIO_32_AH                           (32 | BP_ACTIVE_HIGH)
-#define BP_GPIO_32_AL                           (32 | BP_ACTIVE_LOW)
-#define BP_GPIO_33_AH                           (33 | BP_ACTIVE_HIGH)
-#define BP_GPIO_33_AL                           (33 | BP_ACTIVE_LOW)
-#define BP_GPIO_34_AH                           (34 | BP_ACTIVE_HIGH)
-#define BP_GPIO_34_AL                           (34 | BP_ACTIVE_LOW)
-#define BP_GPIO_35_AH                           (35 | BP_ACTIVE_HIGH)
-#define BP_GPIO_35_AL                           (35 | BP_ACTIVE_LOW)
-#define BP_GPIO_36_AH                           (36 | BP_ACTIVE_HIGH)
-#define BP_GPIO_36_AL                           (36 | BP_ACTIVE_LOW)
-
-/* Values for external interrupt assignments. */
-#define BP_EXT_INTR_0                           0
-#define BP_EXT_INTR_1                           1
-#define BP_EXT_INTR_2                           2
-#define BP_EXT_INTR_3                           3
-
-/* Values for chip select assignments. */
-#define BP_CS_0                                 0
-#define BP_CS_1                                 1
-#define BP_CS_2                                 2
-#define BP_CS_3                                 3
-
-/* Value for GPIO and external interrupt fields that are not used. */
-#define BP_NOT_DEFINED                          0xffff
-#define BP_HW_DEFINED                           0xfff0
-#define BP_UNEQUIPPED                           0xfff1
-
-/* Maximum size of the board id string. */
-#define BP_BOARD_ID_LEN                         16
-
-/* Maximum number of Ethernet MACs. */
-#define BP_MAX_ENET_MACS                        2
-
-/* Maximum number of VoIP DSPs. */
-#define BP_MAX_VOIP_DSP                         2
-
-/* Wireless Antenna Settings. */
-#define BP_WLAN_ANT_MAIN                        0
-#define BP_WLAN_ANT_AUX                         1
-#define BP_WLAN_ANT_BOTH                        3
-
-#if !defined(__ASSEMBLER__)
-
-/* Information about an Ethernet MAC.  If ucPhyType is BP_ENET_NO_PHY,
- * then the other fields are not valid.
- */
-typedef struct EthernetMacInfo
-{
-    unsigned char ucPhyType;                    /* BP_ENET_xxx             */
-    unsigned char ucPhyAddress;                 /* 0 to 31                 */
-    unsigned short usGpioPhySpiSck;             /* GPIO pin or not defined */
-    unsigned short usGpioPhySpiSs;              /* GPIO pin or not defined */
-    unsigned short usGpioPhySpiMosi;            /* GPIO pin or not defined */
-    unsigned short usGpioPhySpiMiso;            /* GPIO pin or not defined */
-    unsigned short usGpioPhyReset;              /* GPIO pin or not defined (96348LV) */
-    unsigned short numSwitchPorts;              /* Number of PHY ports */
-    unsigned short usConfigType;                /* Configuration type */
-    unsigned short usReverseMii;                /* Reverse MII */
-} ETHERNET_MAC_INFO, *PETHERNET_MAC_INFO;
-
-
-/* Information about VoIP DSPs.  If ucDspType is BP_VOIP_NO_DSP,
- * then the other fields are not valid.
- */
-typedef struct VoIPDspInfo
-{
-    unsigned char  ucDspType;
-    unsigned char  ucDspAddress;
-    unsigned short usExtIntrVoip;
-    unsigned short usGpioVoipReset;
-    unsigned short usGpioVoipIntr;
-    unsigned short usGpioLedVoip;
-    unsigned short usCsVoip;
-
-} VOIP_DSP_INFO;
-
-
-/**************************************************************************
- * Name       : BpSetBoardId
- *
- * Description: This function find the BOARD_PARAMETERS structure for the
- *              specified board id string and assigns it to a global, static
- *              variable.
- *
- * Parameters : [IN] pszBoardId - Board id string that is saved into NVRAM.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_FOUND - Error, board id input string does not
- *                  have a board parameters configuration record.
- ***************************************************************************/
-int BpSetBoardId( char *pszBoardId );
-
-/**************************************************************************
- * Name       : BpGetBoardIds
- *
- * Description: This function returns all of the supported board id strings.
- *
- * Parameters : [OUT] pszBoardIds - Address of a buffer that the board id
- *                  strings are returned in.  Each id starts at BP_BOARD_ID_LEN
- *                  boundary.
- *              [IN] nBoardIdsSize - Number of BP_BOARD_ID_LEN elements that
- *                  were allocated in pszBoardIds.
- *
- * Returns    : Number of board id strings returned.
- ***************************************************************************/
-int BpGetBoardIds( char *pszBoardIds, int nBoardIdsSize );
-
-/**************************************************************************
- * Name       : BpGetEthernetMacInfo
- *
- * Description: This function returns all of the supported board id strings.
- *
- * Parameters : [OUT] pEnetInfos - Address of an array of ETHERNET_MAC_INFO
- *                  buffers.
- *              [IN] nNumEnetInfos - Number of ETHERNET_MAC_INFO elements that
- *                  are pointed to by pEnetInfos.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- ***************************************************************************/
-int BpGetEthernetMacInfo( PETHERNET_MAC_INFO pEnetInfos, int nNumEnetInfos );
-
-/**************************************************************************
- * Name       : BpGetSdramSize
- *
- * Description: This function returns a constant that describees the board's
- *              SDRAM type and size.
- *
- * Parameters : [OUT] pulSdramSize - Address of short word that the SDRAM size
- *                  is returned in.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- ***************************************************************************/
-int BpGetSdramSize( unsigned long *pulSdramSize );
-
-/**************************************************************************
- * Name       : BpGetPsiSize
- *
- * Description: This function returns the persistent storage size in K bytes.
- *
- * Parameters : [OUT] pulPsiSize - Address of short word that the persistent
- *                  storage size is returned in.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- ***************************************************************************/
-int BpGetPsiSize( unsigned long *pulPsiSize );
-
-/**************************************************************************
- * Name       : BpGetRj11InnerOuterPairGpios
- *
- * Description: This function returns the GPIO pin assignments for changing
- *              between the RJ11 inner pair and RJ11 outer pair.
- *
- * Parameters : [OUT] pusInner - Address of short word that the RJ11 inner pair
- *                  GPIO pin is returned in.
- *              [OUT] pusOuter - Address of short word that the RJ11 outer pair
- *                  GPIO pin is returned in.
- *
- * Returns    : BP_SUCCESS - Success, values are returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetRj11InnerOuterPairGpios( unsigned short *pusInner,
-    unsigned short *pusOuter );
-
-/**************************************************************************
- * Name       : BpGetPressAndHoldResetGpio
- *
- * Description: This function returns the GPIO pin assignment for the press
- *              and hold reset button.
- *
- * Parameters : [OUT] pusValue - Address of short word that the press and hold
- *                  reset button GPIO pin is returned in.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetPressAndHoldResetGpio( unsigned short *pusValue );
-
-/**************************************************************************
- * Name       : BpGetVoipResetGpio
- *
- * Description: This function returns the GPIO pin assignment for the VOIP
- *              Reset operation.
- *
- * Parameters : [OUT] pusValue - Address of short word that the VOIP reset
- *                  GPIO pin is returned in.
- *              [IN] dspNum - Address of the DSP to query.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetVoipResetGpio( unsigned char dspNum, unsigned short *pusValue );
-
-/**************************************************************************
- * Name       : BpGetVoipIntrGpio
- *
- * Description: This function returns the GPIO pin assignment for VoIP interrupt.
- *
- * Parameters : [OUT] pusValue - Address of short word that the VOIP interrupt
- *                  GPIO pin is returned in.
- *              [IN] dspNum - Address of the DSP to query.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetVoipIntrGpio( unsigned char dspNum, unsigned short *pusValue );
-
-/**************************************************************************
- * Name       : BpGetPcmciaResetGpio
- *
- * Description: This function returns the GPIO pin assignment for the PCMCIA
- *              Reset operation.
- *
- * Parameters : [OUT] pusValue - Address of short word that the PCMCIA reset
- *                  GPIO pin is returned in.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetPcmciaResetGpio( unsigned short *pusValue );
-
-/**************************************************************************
- * Name       : BpGetUartRtsCtsGpios
- *
- * Description: This function returns the GPIO pin assignments for RTS and CTS
- *              UART signals.
- *
- * Parameters : [OUT] pusRts - Address of short word that the UART RTS GPIO
- *                  pin is returned in.
- *              [OUT] pusCts - Address of short word that the UART CTS GPIO
- *                  pin is returned in.
- *
- * Returns    : BP_SUCCESS - Success, values are returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetRtsCtsUartGpios( unsigned short *pusRts, unsigned short *pusCts );
-
-/**************************************************************************
- * Name       : BpGetAdslLedGpio
- *
- * Description: This function returns the GPIO pin assignment for the ADSL
- *              LED.
- *
- * Parameters : [OUT] pusValue - Address of short word that the ADSL LED
- *                  GPIO pin is returned in.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetAdslLedGpio( unsigned short *pusValue );
-
-/**************************************************************************
- * Name       : BpGetAdslFailLedGpio
- *
- * Description: This function returns the GPIO pin assignment for the ADSL
- *              LED that is used when there is a DSL connection failure.
- *
- * Parameters : [OUT] pusValue - Address of short word that the ADSL LED
- *                  GPIO pin is returned in.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetAdslFailLedGpio( unsigned short *pusValue );
-
-/**************************************************************************
- * Name       : BpGetWirelessLedGpio
- *
- * Description: This function returns the GPIO pin assignment for the Wireless
- *              LED.
- *
- * Parameters : [OUT] pusValue - Address of short word that the Wireless LED
- *                  GPIO pin is returned in.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetWirelessLedGpio( unsigned short *pusValue );
-
-/**************************************************************************
- * Name       : BpGetWirelessAntInUse
- *
- * Description: This function returns the antennas in use for wireless
- *
- * Parameters : [OUT] pusValue - Address of short word that the Wireless Antenna
- *                  is in use.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetWirelessAntInUse( unsigned short *pusValue );
-
-/**************************************************************************
- * Name       : BpGetWirelessSesBtnGpio
- *
- * Description: This function returns the GPIO pin assignment for the Wireless
- *              Ses Button.
- *
- * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses
- *                  Button GPIO pin is returned in.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetWirelessSesBtnGpio( unsigned short *pusValue );
-
-/**************************************************************************
- * Name       : BpGetWirelessSesExtIntr
- *
- * Description: This function returns the external interrupt number for the 
- *              Wireless Ses Button.
- *
- * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses
- *                  external interrup is returned in.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetWirelessSesExtIntr( unsigned short *pusValue );
-
-/**************************************************************************
- * Name       : BpGetWirelessSesLedGpio
- *
- * Description: This function returns the GPIO pin assignment for the Wireless
- *              Ses Led.
- *
- * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses
- *                  Led GPIO pin is returned in.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetWirelessSesLedGpio( unsigned short *pusValue );
-
-/**************************************************************************
- * Name       : BpGetUsbLedGpio
- *
- * Description: This function returns the GPIO pin assignment for the USB
- *              LED.
- *
- * Parameters : [OUT] pusValue - Address of short word that the USB LED
- *                  GPIO pin is returned in.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetUsbLedGpio( unsigned short *pusValue );
-
-/**************************************************************************
- * Name       : BpGetHpnaLedGpio
- *
- * Description: This function returns the GPIO pin assignment for the HPNA
- *              LED.
- *
- * Parameters : [OUT] pusValue - Address of short word that the HPNA LED
- *                  GPIO pin is returned in.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetHpnaLedGpio( unsigned short *pusValue );
-
-/**************************************************************************
- * Name       : BpGetWanDataLedGpio
- *
- * Description: This function returns the GPIO pin assignment for the WAN Data
- *              LED.
- *
- * Parameters : [OUT] pusValue - Address of short word that the WAN Data LED
- *                  GPIO pin is returned in.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetWanDataLedGpio( unsigned short *pusValue );
-
-/**************************************************************************
- * Name       : BpGetPppLedGpio
- *
- * Description: This function returns the GPIO pin assignment for the PPP
- *              LED.
- *
- * Parameters : [OUT] pusValue - Address of short word that the PPP LED
- *                  GPIO pin is returned in.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetPppLedGpio( unsigned short *pusValue );
-
-/**************************************************************************
- * Name       : BpGetPppFailLedGpio
- *
- * Description: This function returns the GPIO pin assignment for the PPP
- *              LED that is used when there is a PPP connection failure.
- *
- * Parameters : [OUT] pusValue - Address of short word that the PPP LED
- *                  GPIO pin is returned in.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetPppFailLedGpio( unsigned short *pusValue );
-
-/**************************************************************************
- * Name       : BpGetVoipLedGpio
- *
- * Description: This function returns the GPIO pin assignment for the VOIP
- *              LED.
- *
- * Parameters : [OUT] pusValue - Address of short word that the VOIP LED
- *                  GPIO pin is returned in.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetVoipLedGpio( unsigned short *pusValue );
-
-/**************************************************************************
- * Name       : BpGetBootloaderPowerOnLedGpio
- *
- * Description: This function returns the GPIO pin assignment for the power
- *              on LED that is set by the bootloader.
- *
- * Parameters : [OUT] pusValue - Address of short word that the alarm LED
- *                  GPIO pin is returned in.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetBootloaderPowerOnLedGpio( unsigned short *pusValue );
-
-/**************************************************************************
- * Name       : BpGetBootloaderAlarmLedGpio
- *
- * Description: This function returns the GPIO pin assignment for the alarm
- *              LED that is set by the bootloader.
- *
- * Parameters : [OUT] pusValue - Address of short word that the alarm LED
- *                  GPIO pin is returned in.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetBootloaderAlarmLedGpio( unsigned short *pusValue );
-
-/**************************************************************************
- * Name       : BpGetBootloaderResetCfgLedGpio
- *
- * Description: This function returns the GPIO pin assignment for the reset
- *              configuration LED that is set by the bootloader.
- *
- * Parameters : [OUT] pusValue - Address of short word that the reset
- *                  configuration LED GPIO pin is returned in.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetBootloaderResetCfgLedGpio( unsigned short *pusValue );
-
-/**************************************************************************
- * Name       : BpGetBootloaderStopLedGpio
- *
- * Description: This function returns the GPIO pin assignment for the break
- *              into bootloader LED that is set by the bootloader.
- *
- * Parameters : [OUT] pusValue - Address of short word that the break into
- *                  bootloader LED GPIO pin is returned in.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetBootloaderStopLedGpio( unsigned short *pusValue );
-
-/**************************************************************************
- * Name       : BpGetWirelessExtIntr
- *
- * Description: This function returns the Wireless external interrupt number.
- *
- * Parameters : [OUT] pulValue - Address of short word that the wireless
- *                  external interrupt number is returned in.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetWirelessExtIntr( unsigned long *pulValue );
-
-/**************************************************************************
- * Name       : BpGetAdslDyingGaspExtIntr
- *
- * Description: This function returns the ADSL Dying Gasp external interrupt
- *              number.
- *
- * Parameters : [OUT] pulValue - Address of short word that the ADSL Dying Gasp
- *                  external interrupt number is returned in.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetAdslDyingGaspExtIntr( unsigned long *pulValue );
-
-/**************************************************************************
- * Name       : BpGetVoipExtIntr
- *
- * Description: This function returns the VOIP external interrupt number.
- *
- * Parameters : [OUT] pulValue - Address of short word that the VOIP
- *                  external interrupt number is returned in.
- *              [IN] dspNum - Address of the DSP to query.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetVoipExtIntr( unsigned char dspNum, unsigned long *pulValue );
-
-/**************************************************************************
- * Name       : BpGetHpnaExtIntr
- *
- * Description: This function returns the HPNA external interrupt number.
- *
- * Parameters : [OUT] pulValue - Address of short word that the HPNA
- *                  external interrupt number is returned in.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetHpnaExtIntr( unsigned long *pulValue );
-
-/**************************************************************************
- * Name       : BpGetHpnaChipSelect
- *
- * Description: This function returns the HPNA chip select number.
- *
- * Parameters : [OUT] pulValue - Address of short word that the HPNA
- *                  chip select number is returned in.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetHpnaChipSelect( unsigned long *pulValue );
-
-/**************************************************************************
- * Name       : BpGetVoipChipSelect
- *
- * Description: This function returns the VOIP chip select number.
- *
- * Parameters : [OUT] pulValue - Address of short word that the VOIP
- *                  chip select number is returned in.
- *              [IN] dspNum - Address of the DSP to query.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetVoipChipSelect( unsigned char dspNum, unsigned long *pulValue );
-
-#endif /* __ASSEMBLER__ */
-
-#endif /* _BOARDPARMS_H */
-
diff --git a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/info.c b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/info.c
new file mode 100644
index 000000000..d492aa3cd
--- /dev/null
+++ b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/info.c
@@ -0,0 +1,86 @@
+/*
+ * $Id$
+ *
+ * Copyright (C) 2007 OpenWrt.org
+ * Copyright (C) 2007 Gabor Juhos <juhosg@freemail.hu>
+ * Copyright (C) 2007 Florian Fainelli <florian@openwrt.org>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/types.h>
+#include <linux/autoconf.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+
+#include <asm/bootinfo.h>
+#include <asm/addrspace.h>
+#include <asm/string.h>
+#include <asm/mach-bcm963xx/bootloaders.h>
+
+static char *boot_loader_names[BOOT_LOADER_LAST+1] = {
+        [BOOT_LOADER_UNKNOWN]   = "Unknown",
+        [BOOT_LOADER_CFE]       = "CFE",
+        [BOOT_LOADER_REDBOOT]	= "RedBoot"
+};
+
+/* boot loaders specific definitions */
+#define CFE_EPTSEAL	0x43464531 /* CFE1 is the magic number to recognize CFE from other bootloaders */
+
+int boot_loader_type;
+/*
+ * Boot loader detection routines
+ */
+static int __init detect_cfe(void)
+{
+	/*
+	 * This method only works, when we are booted directly from the CFE.
+	 */
+	uint32_t cfe_handle = (uint32_t) fw_arg0;
+	uint32_t cfe_a1_val = (uint32_t) fw_arg1;
+	uint32_t cfe_entry = (uint32_t) fw_arg2;
+	uint32_t cfe_seal = (uint32_t) fw_arg3;
+
+	/* Check for CFE by finding the CFE magic number */
+	if (cfe_seal != CFE_EPTSEAL)
+		/* We are not booted from CFE */
+		return 0;
+
+	/* cfe_a1_val must be 0, because only one CPU present in the ADM5120 SoC */
+	if (cfe_a1_val != 0)
+		return 0;
+
+	/* The cfe_handle, and the cfe_entry must be kernel mode addresses */
+	if ((cfe_handle < KSEG0) || (cfe_entry < KSEG0))
+		return 0;
+
+	return 1;
+}
+
+static int __init detect_redboot(void)
+{
+	/* On Inventel Livebox, the boot loader is passed as a command line argument, check for it */
+	if (!strncmp(arcs_cmdline, "boot_loader=RedBoot", 19))
+		return 1;
+	return 0;
+}
+
+void __init detect_bootloader(void)
+{
+	if (detect_cfe()) {
+		boot_loader_type = BOOT_LOADER_CFE;
+		printk("Boot loader is : %s\n", boot_loader_names[boot_loader_type]);
+	}
+
+	if (detect_redboot()) {
+		boot_loader_type = BOOT_LOADER_REDBOOT;
+	}
+	else
+		boot_loader_type = BOOT_LOADER_UNKNOWN;
+}
+
+EXPORT_SYMBOL(boot_loader_type);
diff --git a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/irq.c b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/irq.c
index 7ee752684..a606838f3 100644
--- a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/irq.c
+++ b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/irq.c
@@ -35,6 +35,8 @@
 #include <asm/mipsregs.h>
 #include <asm/addrspace.h>
 #include <asm/signal.h>
+#include <6348_map_part.h>
+#include <6348_intr.h>
 #include <bcm_map_part.h>
 #include <bcm_intr.h>
 
diff --git a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/prom.c b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/prom.c
index 44a542d2f..af278a263 100644
--- a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/prom.c
+++ b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/prom.c
@@ -25,119 +25,49 @@
 #include <linux/sched.h>
 #include <linux/bootmem.h>
 #include <linux/blkdev.h>
+
 #include <asm/addrspace.h>
 #include <asm/bootinfo.h>
 #include <asm/cpu.h>
 #include <asm/time.h>
+#include <asm/mach-bcm963xx/bootloaders.h>
+#include <asm/mach-bcm963xx/6348_map_part.h>
 
-#include <bcm_map_part.h>
-#include <board.h>
-#include "boardparms.h"
-#include "softdsl/AdslCoreDefs.h"
-
-
-//char arcs_cmdline[CL_SIZE] __initdata = {0};
-/* inv_xde */
-int boot_loader_type;
-int prom_argc;
-char **prom_argv, **prom_envp;
+#include "../cfe/cfe_private.h"
 
-extern int  do_syslog(int, char *, int);
+extern void __init detect_bootloader(void); 
 extern void serial_init(void);
-extern void __init InitNvramInfo( void );
-extern void kerSysFlashInit( void );
-extern unsigned long get_nvram_start_addr(void);
-void __init create_root_nfs_cmdline( char *cmdline );
+extern int boot_loader_type;
 
 #define MACH_BCM                    MACH_BCM96348
 
 const char *get_system_type(void)
 {
-    /*PNVRAM_DATA pNvramData = (PNVRAM_DATA) get_nvram_start_addr();
-
-    return( pNvramData->szBoardId );*/
-    return "brcm63xx";
-}
-
-unsigned long getMemorySize(void)
-{
-    unsigned long ulSdramType = BOARD_SDRAM_TYPE;
-
-    unsigned long ulSdramSize;
-
-    switch( ulSdramType )
-    {
-    case BP_MEMORY_16MB_1_CHIP:
-    case BP_MEMORY_16MB_2_CHIP:
-        ulSdramSize = 16 * 1024 * 1024;
-        break;
-    case BP_MEMORY_32MB_1_CHIP:
-    case BP_MEMORY_32MB_2_CHIP:
-        ulSdramSize = 32 * 1024 * 1024;
-        break;
-    case BP_MEMORY_64MB_2_CHIP:
-        ulSdramSize = 64 * 1024 * 1024;
-        break;
-    default:
-        ulSdramSize = 8 * 1024 * 1024;
-        break;
-    }
-    if (boot_loader_type == BOOT_CFE)
-      return ulSdramSize;
-    else
-      // assume that there is one contiguous memory map
-      return boot_mem_map.map[0].size;
+	return "Broadcom BCM963xx";
 }
 
-/* --------------------------------------------------------------------------
-    Name: prom_init
- -------------------------------------------------------------------------- */
 void __init prom_init(void)
 {
-    extern ulong r4k_interval;
+    	serial_init();
 
-    serial_init();
+    	printk( "%s prom init\n", get_system_type() );
 
-    prom_argc = fw_arg0;
-    prom_argv = (char **) fw_arg1;
-    prom_envp = (char **) fw_arg2;
+    	PERF->IrqMask = 0;
 
-    if ((prom_argv > 0x80000000) && (prom_argv < 0x82000000)) {
-      strncpy(arcs_cmdline, prom_argv[1], CL_SIZE);
-    }
+	detect_bootloader();
 
-    if (strncmp(arcs_cmdline, "boot_loader=RedBoot", 19) != 0) {
-      boot_loader_type =  BOOT_CFE;
-    }
-    else {
-      boot_loader_type = BOOT_REDBOOT;
-    }
-
-    do_syslog(8, NULL, 8);
-
-    printk( "%s prom init\n", get_system_type() );
-
-    PERF->IrqMask = 0;
-
-    arcs_cmdline[0] = '\0';
-
-       if (boot_loader_type == BOOT_CFE)
-      add_memory_region(0, (getMemorySize() - ADSL_SDRAM_IMAGE_SIZE), BOOT_MEM_RAM);
-    else
-       add_memory_region(0, (0x01000000 - ADSL_SDRAM_IMAGE_SIZE), BOOT_MEM_RAM);
-
-    mips_machgroup = MACH_GROUP_BRCM;
-    mips_machtype = MACH_BCM;
-
-       BpSetBoardId("96348GW-10");
+	if (boot_loader_type == BOOT_LOADER_CFE) {
+		cfe_setup(fw_arg0, fw_arg1, fw_arg2, fw_arg3);
+		add_memory_region(0, (boot_mem_map.map[0].size - ADSL_SDRAM_IMAGE_SIZE), BOOT_MEM_RAM);
+	}
+	else
+		add_memory_region(0, (0x01000000 - ADSL_SDRAM_IMAGE_SIZE), BOOT_MEM_RAM);
+	
+	mips_machgroup = MACH_GROUP_BRCM;
+	mips_machtype = MACH_BCM;
 }
 
-/* --------------------------------------------------------------------------
-    Name: prom_free_prom_memory
-Abstract:
- -------------------------------------------------------------------------- */
 void __init prom_free_prom_memory(void)
 {
-
+	/* We do not have any memory to free */
 }
-
diff --git a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/ser_init.c b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/ser_init.c
index bd53abb5f..bb745aec6 100644
--- a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/ser_init.c
+++ b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/ser_init.c
@@ -37,6 +37,7 @@
 #include <asm/mc146818rtc.h> 
 
 #include <bcm_map_part.h>
+#include <6348_map_part.h>
 #include <board.h>
 
 #define  SER63XX_DEFAULT_BAUD      115200
@@ -54,7 +55,7 @@
 -------------------------------------------------------------------------- */
 void __init serial_init(void)
 {
-    UINT32 tmpVal = SER63XX_DEFAULT_BAUD;
+    u32 tmpVal = SER63XX_DEFAULT_BAUD;
     ULONG clockFreqHz;    
 
 #if defined(CONFIG_BCM96345)
diff --git a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/setup.c b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/setup.c
index 4a4fdadba..bc28b549e 100644
--- a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/setup.c
+++ b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/setup.c
@@ -32,6 +32,7 @@
 #include <linux/slab.h>
 #include <linux/module.h>
 #include <linux/pm.h>
+#include <linux/bootmem.h>
 
 #include <asm/addrspace.h>
 #include <asm/bcache.h>
@@ -39,9 +40,12 @@
 #include <asm/time.h>
 #include <asm/reboot.h>
 #include <asm/gdb-stub.h>
+#include <asm/bootinfo.h>
+#include <asm/cpu.h>
+#include <asm/mach-bcm963xx/bootloaders.h>
 
 extern void brcm_time_init(void);
-extern unsigned long getMemorySize(void);
+extern int boot_loader_type;
 
 #if defined(CONFIG_BCM96348) && defined(CONFIG_PCI)
 #include <linux/pci.h>
@@ -58,15 +62,15 @@ static volatile MpiRegisters * mpi = (MpiRegisters *)(MPI_BASE);
  */
 static void brcm_machine_restart(char *command)
 {
-    const unsigned long ulSoftReset = 0x00000001;
-    unsigned long *pulPllCtrl = (unsigned long *) 0xfffe0008;
-    *pulPllCtrl |= ulSoftReset;
+	const unsigned long ulSoftReset = 0x00000001;
+	unsigned long *pulPllCtrl = (unsigned long *) 0xfffe0008;
+	*pulPllCtrl |= ulSoftReset;
 }
 
 static void brcm_machine_halt(void)
 {
-    printk("System halted\n");
-    while (1);
+	printk("System halted\n");
+	while (1);
 }
 
 #if defined(CONFIG_BCM96348) && defined(CONFIG_PCI)
@@ -372,20 +376,23 @@ static int mpi_DetectPcCard(void)
 
 static int mpi_init(void)
 {
-    unsigned long data;
-    unsigned int chipid;
-    unsigned int chiprev;
-    unsigned int sdramsize;
-
-    chipid  = (PERF->RevID & 0xFFFF0000) >> 16;
-    chiprev = (PERF->RevID & 0xFF);
-    sdramsize = getMemorySize();
-    /*
-     * Init the pci interface 
-     */
-    data = GPIO->GPIOMode; // GPIO mode register
-    data |= GROUP2_PCI | GROUP1_MII_PCCARD; // PCI internal arbiter + Cardbus
-    GPIO->GPIOMode = data; // PCI internal arbiter
+	unsigned long data;
+    	unsigned int chipid, chiprev, sdramsize;
+
+	printk("Broadcom BCM963xx MPI\n");
+    	chipid  = (PERF->RevID & 0xFFFF0000) >> 16;
+    	chiprev = (PERF->RevID & 0xFF);
+
+	if (boot_loader_type == BOOT_LOADER_CFE)
+    		sdramsize = boot_mem_map.map[0].size;
+	else
+		sdramsize = 0x01000000; 
+    	/*
+     	 * Init the pci interface 
+     	 */
+    	data = GPIO->GPIOMode; // GPIO mode register
+    	data |= GROUP2_PCI | GROUP1_MII_PCCARD; // PCI internal arbiter + Cardbus
+    	GPIO->GPIOMode = data; // PCI internal arbiter
 
     /*
      * In the BCM6348 CardBus support is defaulted to Slot 0
@@ -456,68 +463,16 @@ static int mpi_init(void)
 }
 #endif
 
-static int __init brcm63xx_setup(void)
+void __init plat_mem_setup(void)
 {
-    extern int panic_timeout;
-
-    _machine_restart = brcm_machine_restart;
-    _machine_halt = brcm_machine_halt;
-    pm_power_off = brcm_machine_halt;
+	_machine_restart = brcm_machine_restart;
+	_machine_halt = brcm_machine_halt;
+	pm_power_off = brcm_machine_halt;
 
-    board_time_init = brcm_time_init;
-
-    panic_timeout = 5;
+	board_time_init = brcm_time_init;
 
 #if defined(CONFIG_BCM96348) && defined(CONFIG_PCI)
-    /* mpi initialization */
-    mpi_init();
+    	/* mpi initialization */
+    	mpi_init();
 #endif
-    return 0;
-}
-
-void __init plat_mem_setup(void)
-{
-    brcm63xx_setup();
-}
-
-/***************************************************************************
- * C++ New and delete operator functions
- ***************************************************************************/
-
-/* void *operator new(unsigned int sz) */
-void *_Znwj(unsigned int sz)
-{
-    return( kmalloc(sz, GFP_KERNEL) );
 }
-
-/* void *operator new[](unsigned int sz)*/
-void *_Znaj(unsigned int sz)
-{
-    return( kmalloc(sz, GFP_KERNEL) );
-}
-
-/* placement new operator */
-/* void *operator new (unsigned int size, void *ptr) */
-void *ZnwjPv(unsigned int size, void *ptr)
-{
-    return ptr;
-}
-
-/* void operator delete(void *m) */
-void _ZdlPv(void *m)
-{
-    kfree(m);
-}
-
-/* void operator delete[](void *m) */
-void _ZdaPv(void *m)
-{
-    kfree(m);
-}
-
-EXPORT_SYMBOL(_Znwj);
-EXPORT_SYMBOL(_Znaj);
-EXPORT_SYMBOL(ZnwjPv);
-EXPORT_SYMBOL(_ZdlPv);
-EXPORT_SYMBOL(_ZdaPv);
-
diff --git a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/softdsl/AdslCoreDefs.h b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/softdsl/AdslCoreDefs.h
deleted file mode 100644
index b05d98ed9..000000000
--- a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/softdsl/AdslCoreDefs.h
+++ /dev/null
@@ -1,2 +0,0 @@
-#define ADSL_SDRAM_IMAGE_SIZE (384*1024)
-
diff --git a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/time.c b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/time.c
index b615c2842..8b82ada37 100644
--- a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/time.c
+++ b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/time.c
@@ -35,6 +35,8 @@
 #include <asm/div64.h>
 #include <asm/time.h>
 
+#include <6348_map_part.h>
+#include <6348_intr.h>
 #include <bcm_map_part.h>
 #include <bcm_intr.h>
 
@@ -54,7 +56,7 @@ static unsigned long r4k_cur;		/* What counter should be at next timer irq */
 
 static inline unsigned long __init calculateCpuSpeed(void)
 {
-    UINT32 pllStrap = PERF->PllStrap;
+    u32 pllStrap = PERF->PllStrap;
     int n1 = (pllStrap & PLL_N1_MASK) >> PLL_N1_SHFT;
     int n2 = (pllStrap & PLL_N2_MASK) >> PLL_N2_SHFT;
     int m1cpu = (pllStrap & PLL_M1_CPU_MASK) >> PLL_M1_CPU_SHFT;
diff --git a/target/linux/brcm63xx-2.6/files/arch/mips/cfe/Makefile b/target/linux/brcm63xx-2.6/files/arch/mips/cfe/Makefile
new file mode 100644
index 000000000..d9f046adf
--- /dev/null
+++ b/target/linux/brcm63xx-2.6/files/arch/mips/cfe/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the Broadcom Common Firmware Environment support
+#
+
+obj-y += cfe.o
diff --git a/target/linux/brcm63xx-2.6/files/arch/mips/cfe/cfe.c b/target/linux/brcm63xx-2.6/files/arch/mips/cfe/cfe.c
new file mode 100644
index 000000000..6d16111e1
--- /dev/null
+++ b/target/linux/brcm63xx-2.6/files/arch/mips/cfe/cfe.c
@@ -0,0 +1,533 @@
+/*
+ * Broadcom Common Firmware Environment (CFE) support
+ *
+ * Copyright 2000, 2001, 2002
+ * Broadcom Corporation. All rights reserved.
+ *
+ * Copyright (C) 2006 Michael Buesch
+ *
+ * Original Authors:  Mitch Lichtenberg, Chris Demetriou
+ *
+ * This software is furnished under license and may be used and copied only
+ * in accordance with the following terms and conditions.  Subject to these
+ * conditions, you may download, copy, install, use, modify and distribute
+ * modified or unmodified copies of this software in source and/or binary
+ * form. No title or ownership is transferred hereby.
+ *
+ * 1) Any source code used, modified or distributed must reproduce and
+ *    retain this copyright notice and list of conditions as they appear in
+ *    the source file.
+ *
+ * 2) No right is granted to use any trade name, trademark, or logo of
+ *    Broadcom Corporation.  The "Broadcom Corporation" name may not be
+ *    used to endorse or promote products derived from this software
+ *    without the prior written permission of Broadcom Corporation.
+ *
+ * 3) THIS SOFTWARE IS PROVIDED "AS-IS" AND ANY EXPRESS OR IMPLIED
+ *    WARRANTIES, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF
+ *    MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR
+ *    NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM BE LIABLE
+ *    FOR ANY DAMAGES WHATSOEVER, AND IN PARTICULAR, BROADCOM SHALL NOT BE
+ *    LIABLE FOR DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ *    CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ *    SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ *    BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ *    WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ *    OR OTHERWISE), EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/init.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/spinlock.h>
+#include <asm/cfe.h>
+
+#include "cfe_private.h"
+
+
+static cfe_uint_t cfe_handle;
+static int (*cfe_trampoline)(long handle, long iocb);
+
+
+#include <linux/kernel.h>
+
+void __init cfe_setup(unsigned long fwarg0, unsigned long fwarg1,
+		      unsigned long fwarg2, unsigned long fwarg3)
+{
+	if (fwarg3 == 0x80300000) {
+		/* WRT54G workaround */
+		fwarg3 = CFE_EPTSEAL;
+		fwarg2 = 0xBFC00500;
+	}
+	if (fwarg3 != CFE_EPTSEAL) {
+		/* We are not booted from CFE */
+		return;
+	}
+	if (fwarg1 == 0) {
+		/* We are on the boot CPU */
+		cfe_handle = (cfe_uint_t)fwarg0;
+		cfe_trampoline = CFE_TO_PTR(fwarg2);
+	}
+}
+
+int cfe_vprintk(const char *fmt, va_list args)
+{
+	static char buffer[1024];
+	static DEFINE_SPINLOCK(lock);
+	static const char pfx[] = "CFE-console: ";
+	static const size_t pfx_len = sizeof(pfx) - 1;
+	unsigned long flags;
+	int len, cnt, pos;
+	int handle;
+	int res;
+
+	if (!cfe_present())
+		return -ENODEV;
+
+	spin_lock_irqsave(&lock, flags);
+	handle = cfe_getstdhandle(CFE_STDHANDLE_CONSOLE);
+	if (CFE_ISERR(handle)) {
+		len = -EIO;
+		goto out;
+	}
+	strcpy(buffer, pfx);
+	len = vscnprintf(buffer + pfx_len,
+			 sizeof(buffer) - pfx_len - 2,
+			 fmt, args);
+	len += pfx_len;
+	/* The CFE console requires CR-LF line-ends.
+	 * Add a CR, if we only terminate lines with a LF.
+	 * This does only fix CR-LF at the end of the string.
+	 * So for multiple lines, use multiple cfe_vprintk calls.
+	 */
+	if (len > 1 &&
+	    buffer[len - 1] == '\n' && buffer[len - 2] != '\r') {
+		buffer[len - 1] = '\r';
+		buffer[len] = '\n';
+		len += 1;
+	}
+	cnt = len;
+	pos = 0;
+	while (cnt > 0) {
+		res = cfe_write(handle, buffer + pos, len - pos);
+		if (CFE_ISERR(res)) {
+			len = -EIO;
+			goto out;
+		}
+		cnt -= res;
+		pos += res;
+	}
+out:
+	spin_unlock_irqrestore(&lock, flags);
+
+	return len;
+}
+
+int cfe_printk(const char *fmt, ...)
+{
+	va_list args;
+	int res;
+
+	va_start(args, fmt);
+	res = cfe_vprintk(fmt, args);
+	va_end(args);
+
+	return res;
+}
+
+static int cfe_iocb_dispatch(struct cfe_iocb *iocb)
+{
+	if (!cfe_present())
+		return CFE_ERR_UNSUPPORTED;
+	return cfe_trampoline((long)cfe_handle, (long)iocb);
+}
+
+int cfe_present(void)
+{
+	return (cfe_trampoline != NULL);
+}
+
+int cfe_close(int handle)
+{
+	struct cfe_iocb iocb;
+	int err;
+
+	memset(&iocb, 0, sizeof(iocb));
+	iocb.fcode = CFE_CMD_DEV_CLOSE;
+	iocb.handle = handle;
+
+	err = cfe_iocb_dispatch(&iocb);
+
+	return (CFE_ISERR(err)) ? err : iocb.status;
+}
+
+int cfe_cpu_start(int cpu, void (*fn)(void), long sp, long gp, long a1)
+{
+	struct cfe_iocb iocb;
+	int err;
+
+	memset(&iocb, 0, sizeof(iocb));
+	iocb.fcode = CFE_CMD_FW_CPUCTL;
+	iocb.psize = sizeof(struct cfe_iocb_cpuctl);
+	iocb.cpuctl.number = cpu;
+	iocb.cpuctl.command = CFE_CPU_CMD_START;
+	iocb.cpuctl.gp = gp;
+	iocb.cpuctl.sp = sp;
+	iocb.cpuctl.a1 = a1;
+	iocb.cpuctl.start_addr = (long)fn;
+
+	err = cfe_iocb_dispatch(&iocb);
+
+	return (CFE_ISERR(err)) ? err : iocb.status;
+}
+
+int cfe_cpu_stop(int cpu)
+{
+	struct cfe_iocb iocb;
+	int err;
+
+	memset(&iocb, 0, sizeof(iocb));
+	iocb.fcode = CFE_CMD_FW_CPUCTL;
+	iocb.psize = sizeof(struct cfe_iocb_cpuctl);
+	iocb.cpuctl.number = cpu;
+	iocb.cpuctl.command = CFE_CPU_CMD_STOP;
+
+	err = cfe_iocb_dispatch(&iocb);
+
+	return (CFE_ISERR(err)) ? err : iocb.status;
+}
+
+int cfe_enumenv(int idx, char *name, int namelen, char *val, int vallen)
+{
+	struct cfe_iocb iocb;
+	int err;
+
+	memset(&iocb, 0, sizeof(iocb));
+	iocb.fcode = CFE_CMD_ENV_ENUM;
+	iocb.psize = sizeof(struct cfe_iocb_envbuf);
+	iocb.envbuf.index = idx;
+	iocb.envbuf.name = PTR_TO_CFE(name);
+	iocb.envbuf.name_len = namelen;
+	iocb.envbuf.val = PTR_TO_CFE(val);
+	iocb.envbuf.val_len = vallen;
+
+	err = cfe_iocb_dispatch(&iocb);
+
+	return (CFE_ISERR(err)) ? err : iocb.status;
+}
+
+int cfe_enumdev(int idx, char *name, int namelen)
+{
+	struct cfe_iocb iocb;
+	int err;
+
+	memset(&iocb, 0, sizeof(iocb));
+
+	iocb.fcode = CFE_CMD_DEV_ENUM;
+	iocb.psize = sizeof(struct cfe_iocb_envbuf);
+	iocb.envbuf.index = idx;
+	iocb.envbuf.name = PTR_TO_CFE(name);
+	iocb.envbuf.name_len = namelen;
+
+	err = cfe_iocb_dispatch(&iocb);
+
+	return (CFE_ISERR(err)) ? err : iocb.status;
+}
+
+int cfe_enummem(int idx, int flags, u64 *start, u64 *length,
+		u64 *type)
+{
+	struct cfe_iocb iocb;
+	int err;
+
+	memset(&iocb, 0, sizeof(iocb));
+
+	iocb.fcode = CFE_CMD_FW_MEMENUM;
+	iocb.flags = flags;
+	iocb.psize = sizeof(struct cfe_iocb_meminfo);
+	iocb.meminfo.index = idx;
+
+	err = cfe_iocb_dispatch(&iocb);
+	if (CFE_ISERR(err))
+		return err;
+	if (!CFE_ISERR(iocb.status)) {
+		*start = iocb.meminfo.addr;
+		*length = iocb.meminfo.size;
+		*type = iocb.meminfo.type;
+	}
+
+	return iocb.status;
+}
+
+int cfe_exit(int warm, int status)
+{
+	struct cfe_iocb iocb;
+	int err;
+
+printk("CFE REBOOT\n");
+	memset(&iocb, 0, sizeof(iocb));
+	iocb.fcode = CFE_CMD_FW_RESTART;
+	if (warm)
+		iocb.flags = CFE_FLG_WARMSTART;
+	iocb.psize = sizeof(struct cfe_iocb_exitstat);
+	iocb.exitstat.status = status;
+
+printk("CALL\n");
+	err = cfe_iocb_dispatch(&iocb);
+printk("DONE\n");
+
+	return (CFE_ISERR(err)) ? err : iocb.status;
+}
+
+int cfe_flushcache(int flags)
+{
+	struct cfe_iocb iocb;
+	int err;
+
+	memset(&iocb, 0, sizeof(iocb));
+	iocb.fcode = CFE_CMD_FW_FLUSHCACHE;
+	iocb.flags = flags;
+
+	err = cfe_iocb_dispatch(&iocb);
+
+	return (CFE_ISERR(err)) ? err : iocb.status;
+}
+
+int cfe_getdevinfo(char *name)
+{
+	struct cfe_iocb iocb;
+	int err;
+
+	memset(&iocb, 0, sizeof(iocb));
+	iocb.fcode = CFE_CMD_DEV_GETINFO;
+	iocb.psize = sizeof(struct cfe_iocb_buf);
+	iocb.buffer.ptr = PTR_TO_CFE(name);
+	iocb.buffer.length = strlen(name);
+
+	err = cfe_iocb_dispatch(&iocb);
+	if (CFE_ISERR(err))
+		return err;
+	if (CFE_ISERR(iocb.status))
+		return iocb.status;
+
+	return iocb.buffer.devflags;
+}
+
+int cfe_getenv(char *name, char *dest, int destlen)
+{
+	struct cfe_iocb iocb;
+	int err;
+
+	dest[0] = '\0';
+	memset(&iocb, 0, sizeof(iocb));
+	iocb.fcode = CFE_CMD_ENV_GET;
+	iocb.psize = sizeof(struct cfe_iocb_envbuf);
+	iocb.envbuf.name = PTR_TO_CFE(name);
+	iocb.envbuf.name_len = strlen(name);
+	iocb.envbuf.val = PTR_TO_CFE(dest);
+	iocb.envbuf.val_len = destlen;
+
+	err = cfe_iocb_dispatch(&iocb);
+
+	return (CFE_ISERR(err)) ? err : iocb.status;
+}
+
+int cfe_getfwinfo(struct cfe_fwinfo *info)
+{
+	struct cfe_iocb iocb;
+	int err;
+
+	memset(&iocb, 0, sizeof(iocb));
+	iocb.fcode = CFE_CMD_FW_GETINFO;
+	iocb.psize = sizeof(struct cfe_iocb_fwinfo);
+
+	err = cfe_iocb_dispatch(&iocb);
+	if (CFE_ISERR(err))
+		return err;
+	if (CFE_ISERR(iocb.status))
+		return err;
+
+	info->version = iocb.fwinfo.version;
+	info->totalmem = iocb.fwinfo.totalmem;
+	info->flags = iocb.fwinfo.flags;
+	info->boardid = iocb.fwinfo.boardid;
+	info->bootarea_va = iocb.fwinfo.bootarea_va;
+	info->bootarea_pa = iocb.fwinfo.bootarea_pa;
+	info->bootarea_size = iocb.fwinfo.bootarea_size;
+
+	return iocb.status;
+}
+
+int cfe_getstdhandle(int handletype)
+{
+	struct cfe_iocb iocb;
+	int err;
+
+	memset(&iocb, 0, sizeof(iocb));
+	iocb.fcode = CFE_CMD_DEV_GETHANDLE;
+	iocb.flags = handletype;
+
+	err = cfe_iocb_dispatch(&iocb);
+	if (CFE_ISERR(err))
+		return err;
+	if (CFE_ISERR(iocb.status))
+		return iocb.status;
+
+	return iocb.handle;
+}
+
+int cfe_getticks(s64 *ticks)
+{
+	struct cfe_iocb iocb;
+	int err;
+
+	memset(&iocb, 0, sizeof(iocb));
+	iocb.fcode = CFE_CMD_FW_GETTIME;
+	iocb.psize = sizeof(struct cfe_iocb_time);
+
+	err = cfe_iocb_dispatch(&iocb);
+	if (CFE_ISERR(err))
+		return err;
+	if (!CFE_ISERR(iocb.status))
+		*ticks = iocb.time.ticks;
+
+	return iocb.status;
+}
+
+int cfe_inpstat(int handle)
+{
+	struct cfe_iocb iocb;
+	int err;
+
+	memset(&iocb, 0, sizeof(iocb));
+	iocb.fcode = CFE_CMD_DEV_INPSTAT;
+	iocb.handle = handle;
+	iocb.psize = sizeof(struct cfe_iocb_inpstat);
+
+	err = cfe_iocb_dispatch(&iocb);
+	if (CFE_ISERR(err))
+		return err;
+	if (CFE_ISERR(iocb.status))
+		return iocb.status;
+
+	return iocb.inpstat.status;
+}
+
+int cfe_ioctl(int handle, unsigned int ioctlnum,
+	      unsigned char *buffer, int length,
+	      int *retlen, u64 offset)
+{
+	struct cfe_iocb iocb;
+	int err;
+
+	memset(&iocb, 0, sizeof(iocb));
+	iocb.fcode = CFE_CMD_DEV_IOCTL;
+	iocb.handle = handle;
+	iocb.psize = sizeof(struct cfe_iocb_buf);
+	iocb.buffer.offset = offset;
+	iocb.buffer.ioctlcmd = ioctlnum;
+	iocb.buffer.ptr = PTR_TO_CFE(buffer);
+	iocb.buffer.length = length;
+
+	err = cfe_iocb_dispatch(&iocb);
+	if (CFE_ISERR(err))
+		return err;
+	if (CFE_ISERR(iocb.status))
+		return iocb.status;
+	if (retlen)
+		*retlen = iocb.buffer.retlen;
+
+	return iocb.status;
+}
+
+int cfe_open(char *name)
+{
+	struct cfe_iocb iocb;
+	int err;
+
+	memset(&iocb, 0, sizeof(iocb));
+	iocb.fcode = CFE_CMD_DEV_OPEN;
+	iocb.psize = sizeof(struct cfe_iocb_buf);
+	iocb.buffer.ptr = PTR_TO_CFE(name);
+	iocb.buffer.length = strlen(name);
+
+	err = cfe_iocb_dispatch(&iocb);
+	if (CFE_ISERR(err))
+		return err;
+	if (CFE_ISERR(iocb.status))
+		return iocb.status;
+
+	return iocb.handle;
+}
+
+int cfe_read(int handle, unsigned char *buffer, int length)
+{
+	return cfe_readblk(handle, 0, buffer, length);
+}
+
+int cfe_readblk(int handle, s64 offset, unsigned char *buffer, int length)
+{
+	struct cfe_iocb iocb;
+	int err;
+
+	memset(&iocb, 0, sizeof(iocb));
+	iocb.fcode = CFE_CMD_DEV_READ;
+	iocb.handle = handle;
+	iocb.psize = sizeof(struct cfe_iocb_buf);
+	iocb.buffer.offset = offset;
+	iocb.buffer.ptr = PTR_TO_CFE(buffer);
+	iocb.buffer.length = length;
+
+	err = cfe_iocb_dispatch(&iocb);
+	if (CFE_ISERR(err))
+		return err;
+	if (CFE_ISERR(iocb.status))
+		return iocb.status;
+
+	return iocb.buffer.retlen;
+}
+
+int cfe_setenv(char *name, char *val)
+{
+	struct cfe_iocb iocb;
+	int err;
+
+	memset(&iocb, 0, sizeof(iocb));
+	iocb.fcode = CFE_CMD_ENV_SET;
+	iocb.psize = sizeof(struct cfe_iocb_envbuf);
+	iocb.envbuf.name = PTR_TO_CFE(name);
+	iocb.envbuf.name_len = strlen(name);
+	iocb.envbuf.val = PTR_TO_CFE(val);
+	iocb.envbuf.val_len = strlen(val);
+
+	err = cfe_iocb_dispatch(&iocb);
+
+	return (CFE_ISERR(err)) ? err : iocb.status;
+}
+
+int cfe_write(int handle, unsigned char *buffer, int length)
+{
+	return cfe_writeblk(handle, 0, buffer, length);
+}
+
+int cfe_writeblk(int handle, s64 offset, unsigned char *buffer, int length)
+{
+	struct cfe_iocb iocb;
+	int err;
+
+	memset(&iocb, 0, sizeof(iocb));
+	iocb.fcode = CFE_CMD_DEV_WRITE;
+	iocb.handle = handle;
+	iocb.psize = sizeof(struct cfe_iocb_buf);
+	iocb.buffer.offset = offset;
+	iocb.buffer.ptr = PTR_TO_CFE(buffer);
+	iocb.buffer.length = length;
+
+	err = cfe_iocb_dispatch(&iocb);
+	if (CFE_ISERR(err))
+		return err;
+	if (CFE_ISERR(iocb.status))
+		return iocb.status;
+
+	return iocb.buffer.retlen;
+}
diff --git a/target/linux/brcm63xx-2.6/files/arch/mips/cfe/cfe_private.h b/target/linux/brcm63xx-2.6/files/arch/mips/cfe/cfe_private.h
new file mode 100644
index 000000000..0a604d3bb
--- /dev/null
+++ b/target/linux/brcm63xx-2.6/files/arch/mips/cfe/cfe_private.h
@@ -0,0 +1,176 @@
+/*
+ * Broadcom Common Firmware Environment (CFE) support
+ *
+ * Copyright 2000, 2001, 2002
+ * Broadcom Corporation. All rights reserved.
+ *
+ * Copyright (C) 2006 Michael Buesch
+ *
+ * Original Authors:  Mitch Lichtenberg, Chris Demetriou
+ *
+ * This software is furnished under license and may be used and copied only
+ * in accordance with the following terms and conditions.  Subject to these
+ * conditions, you may download, copy, install, use, modify and distribute
+ * modified or unmodified copies of this software in source and/or binary
+ * form. No title or ownership is transferred hereby.
+ *
+ * 1) Any source code used, modified or distributed must reproduce and
+ *    retain this copyright notice and list of conditions as they appear in
+ *    the source file.
+ *
+ * 2) No right is granted to use any trade name, trademark, or logo of
+ *    Broadcom Corporation.  The "Broadcom Corporation" name may not be
+ *    used to endorse or promote products derived from this software
+ *    without the prior written permission of Broadcom Corporation.
+ *
+ * 3) THIS SOFTWARE IS PROVIDED "AS-IS" AND ANY EXPRESS OR IMPLIED
+ *    WARRANTIES, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF
+ *    MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR
+ *    NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM BE LIABLE
+ *    FOR ANY DAMAGES WHATSOEVER, AND IN PARTICULAR, BROADCOM SHALL NOT BE
+ *    LIABLE FOR DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ *    CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ *    SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ *    BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ *    WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ *    OR OTHERWISE), EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef LINUX_CFE_PRIVATE_H_
+#define LINUX_CFE_PRIVATE_H_
+
+#ifndef __ASSEMBLY__
+
+/* Seal indicating CFE's presence, passed to the kernel. */
+#define CFE_EPTSEAL		0x43464531
+
+#define CFE_CMD_FW_GETINFO	0
+#define CFE_CMD_FW_RESTART	1
+#define CFE_CMD_FW_BOOT		2
+#define CFE_CMD_FW_CPUCTL	3
+#define CFE_CMD_FW_GETTIME      4
+#define CFE_CMD_FW_MEMENUM	5
+#define CFE_CMD_FW_FLUSHCACHE	6
+
+#define CFE_CMD_DEV_GETHANDLE	9
+#define CFE_CMD_DEV_ENUM	10
+#define CFE_CMD_DEV_OPEN	11
+#define CFE_CMD_DEV_INPSTAT	12
+#define CFE_CMD_DEV_READ	13
+#define CFE_CMD_DEV_WRITE	14
+#define CFE_CMD_DEV_IOCTL	15
+#define CFE_CMD_DEV_CLOSE	16
+#define CFE_CMD_DEV_GETINFO	17
+
+#define CFE_CMD_ENV_ENUM	20
+#define CFE_CMD_ENV_GET		22
+#define CFE_CMD_ENV_SET		23
+#define CFE_CMD_ENV_DEL		24
+
+#define CFE_CMD_MAX		32
+
+#define CFE_CMD_VENDOR_USE	0x8000	/* codes above this are for customer use */
+
+typedef u64 cfe_uint_t;
+typedef s64 cfe_int_t;
+typedef s64 cfe_ptr_t;
+
+/* Cast a pointer from native to CFE-API pointer and back */
+#define CFE_TO_PTR(p)		((void *)(unsigned long)(p))
+#define PTR_TO_CFE(p)		((cfe_ptr_t)(unsigned long)(p))
+
+struct cfe_iocb_buf {
+	cfe_uint_t	offset;		/* offset on device (bytes) */
+	cfe_ptr_t	ptr;		/* pointer to a buffer */
+	cfe_uint_t	length;		/* length of this buffer */
+	cfe_uint_t	retlen;		/* returned length (for read ops) */
+	union {
+		cfe_uint_t	ioctlcmd;	/* IOCTL command (used only for IOCTLs) */
+		cfe_uint_t	devflags;	/* Returned device info flags */
+	};
+};
+
+struct cfe_iocb_inpstat {
+	cfe_uint_t	status;		/* 1 means input available */
+};
+
+struct cfe_iocb_envbuf {
+	cfe_int_t	index;		/* 0-based enumeration index */
+	cfe_ptr_t	name;		/* name string buffer */
+	cfe_int_t	name_len;	/* size of name buffer */
+	cfe_ptr_t	val;		/* value string buffer */
+	cfe_int_t	val_len;	/* size of value string buffer */
+};
+
+struct cfe_iocb_cpuctl {
+	cfe_uint_t	number;		/* cpu number to control */
+	cfe_uint_t	command;	/* command to issue to CPU */
+	cfe_uint_t	start_addr;	/* CPU start address */
+	cfe_uint_t	gp;		/* starting GP value */
+	cfe_uint_t	sp;		/* starting SP value */
+	cfe_uint_t	a1;		/* starting A1 value */
+};
+
+struct cfe_iocb_time {
+	cfe_int_t	ticks;		/* current time in ticks */
+};
+
+struct cfe_iocb_exitstat {
+	cfe_int_t	status;
+};
+
+struct cfe_iocb_meminfo {
+	cfe_int_t	index;		/* 0-based enumeration index */
+	cfe_int_t	type;		/* type of memory block */
+	cfe_uint_t	addr;		/* physical start address */
+	cfe_uint_t	size;		/* block size */
+};
+
+struct cfe_iocb_fwinfo {
+	cfe_int_t	version;	/* major, minor, eco version */
+	cfe_int_t	totalmem;	/* total installed mem */
+	cfe_int_t	flags;		/* various flags */
+	cfe_int_t	boardid;	/* board ID */
+	cfe_int_t	bootarea_va;	/* VA of boot area */
+	cfe_int_t	bootarea_pa;	/* PA of boot area */
+	cfe_int_t	bootarea_size;	/* size of boot area */
+	cfe_int_t	reserved1;
+	cfe_int_t	reserved2;
+	cfe_int_t	reserved3;
+};
+
+/* CFE I/O Control Block */
+struct cfe_iocb {
+	cfe_uint_t	fcode;		/* IOCB function code */
+	cfe_int_t	status;		/* return status */
+	cfe_int_t	handle;		/* file/device handle */
+	cfe_uint_t	flags;		/* flags for this IOCB */
+	cfe_uint_t	psize;		/* size of parameter list */
+	union {
+		struct cfe_iocb_buf		buffer;		/* buffer parameters */
+		struct cfe_iocb_inpstat		inpstat;	/* input status parameters */
+		struct cfe_iocb_envbuf		envbuf;		/* environment function parameters */
+		struct cfe_iocb_cpuctl		cpuctl;		/* CPU control parameters */
+		struct cfe_iocb_time		time;		/* timer parameters */
+		struct cfe_iocb_meminfo		meminfo;	/* memory arena info parameters */
+		struct cfe_iocb_fwinfo		fwinfo;		/* firmware information */
+		struct cfe_iocb_exitstat	exitstat;	/* Exit Status */
+	};
+};
+
+
+#include <linux/init.h>
+
+void __init cfe_setup(unsigned long fwarg0, unsigned long fwarg1,
+		      unsigned long fwarg2, unsigned long fwarg3);
+
+#else /* __ASSEMBLY__ */
+
+	.macro	cfe_early_init
+#ifdef CONFIG_CFE
+		jal	cfe_setup
+#endif
+	.endm
+
+#endif /* __ASSEMBLY__ */
+#endif /* LINUX_CFE_PRIVATE_H_ */
diff --git a/target/linux/brcm63xx-2.6/files/arch/mips/pci/fixup-bcm96348.c b/target/linux/brcm63xx-2.6/files/arch/mips/pci/fixup-bcm96348.c
index b5a8e1587..ae71ebc73 100644
--- a/target/linux/brcm63xx-2.6/files/arch/mips/pci/fixup-bcm96348.c
+++ b/target/linux/brcm63xx-2.6/files/arch/mips/pci/fixup-bcm96348.c
@@ -23,6 +23,8 @@
 #include <bcmpci.h>
 #include <bcm_intr.h>
 #include <bcm_map_part.h>
+#include <6348_intr.h>
+#include <6348_map_part.h>
 
 static volatile MpiRegisters * mpi = (MpiRegisters *)(MPI_BASE);
 
diff --git a/target/linux/brcm63xx-2.6/files/arch/mips/pci/ops-bcm96348.c b/target/linux/brcm63xx-2.6/files/arch/mips/pci/ops-bcm96348.c
index b051c5608..ee1647121 100644
--- a/target/linux/brcm63xx-2.6/files/arch/mips/pci/ops-bcm96348.c
+++ b/target/linux/brcm63xx-2.6/files/arch/mips/pci/ops-bcm96348.c
@@ -24,6 +24,8 @@
 
 #include <bcm_intr.h>
 #include <bcm_map_part.h>
+#include <6348_intr.h>
+#include <6348_map_part.h>
 #include <bcmpci.h>
 
 #include <linux/delay.h>
diff --git a/target/linux/brcm63xx-2.6/files/drivers/mtd/maps/bcm963xx-flash.c b/target/linux/brcm63xx-2.6/files/drivers/mtd/maps/bcm963xx-flash.c
index c4c4526b4..c7013cc97 100644
--- a/target/linux/brcm63xx-2.6/files/drivers/mtd/maps/bcm963xx-flash.c
+++ b/target/linux/brcm63xx-2.6/files/drivers/mtd/maps/bcm963xx-flash.c
@@ -1,277 +1,474 @@
 /*
- * $Id$
- * Copyright (C) 2006  Florian Fainelli <florian@openwrt.org>
- * 			Mike Albon <malbon@openwrt.org>
- * Copyright (C) $Date$  $Author$
+ *  Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
+ *  Copyright (C) 2005 Waldemar Brodkorb <wbx@openwrt.org>
+ *  Copyright (C) 2004 Florian Schirmer (jolt@tuxbox.org)
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ *  original functions for finding root filesystem from Mike Baker 
  *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
  *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-/* This is the BCM963xx flash map driver, in its actual state it only supports BCM96348 devices
- * this driver is able to manage both bootloader we found on these boards : CFE and RedBoot
- *
- * RedBoot :
- *  - this bootloader allows us to parse partitions and therefore deduce the MTD partition table
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  *
- * CFE :
- *   - CFE partitionning can be detected as for BCM947xx devices 
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ * 
+ *  Copyright 2001-2003, Broadcom Corporation
+ *  All Rights Reserved.
+ * 
+ *  THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ *  KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ *  SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ *  FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
  *
+ *  Flash mapping for BCM963XX boards
  */
 
-#include <asm/io.h>
 #include <linux/init.h>
+#include <linux/module.h>
+#include <linux/types.h>
 #include <linux/kernel.h>
-#include <linux/mtd/map.h>
+#include <linux/wait.h>
 #include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#ifdef CONFIG_MTD_PARTITIONS
 #include <linux/mtd/partitions.h>
-#include <linux/vmalloc.h>
-#include <board.h>
+#endif
+#include <linux/squashfs_fs.h>
+#include <linux/jffs2.h>
+#include <linux/crc32.h>
+#include <asm/io.h>
 
-#define WINDOW_ADDR 0x1FC00000         /* Real address of the flash */
-#define WINDOW_SIZE 0x400000           /* Size of flash */
-#define BUSWIDTH 2                     /* Buswidth */
-#define EXTENDED_SIZE 0xBFC00000       /* Extended flash address */
-#define IMAGE_LEN 10                   /* Length of Length Field */
-#define ADDRESS_LEN 12                 /* Length of Address field */
-#define ROUNDUP(x, y) ((((x)+((y)-1))/(y))*(y))
+#include <asm/mach-bcm963xx/bootloaders.h>
 
-extern int boot_loader_type;           /* For RedBoot / CFE detection */
+extern int boot_loader_type;
 extern int parse_redboot_partitions(struct mtd_info *master, struct mtd_partition **pparts, unsigned long fis_origin);
 static struct mtd_partition *parsed_parts;
 
-static void __exit bcm963xx_mtd_cleanup(void);
 
-static struct mtd_info *bcm963xx_mtd_info;
+#define TRX_MAGIC	0x30524448	/* "HDR0" */
+#define TRX_VERSION	1
+#define TRX_MAX_LEN	0x3A0000
+#define TRX_NO_HEADER	1		/* Do not write TRX header */	
+#define TRX_GZ_FILES	0x2     /* Contains up to TRX_MAX_OFFSET individual gzip files */
+#define TRX_MAX_OFFSET	3
 
-static struct map_info bcm963xx_map = {
-       .name = "bcm963xx",
-       .size = WINDOW_SIZE,
-       .bankwidth = BUSWIDTH,
-       .phys = WINDOW_ADDR,
+struct trx_header {
+	u32 magic;		/* "HDR0" */
+	u32 len;		/* Length of file including header */
+	u32 crc32;		/* 32-bit CRC from flag_version to end of file */
+	u32 flag_version;	/* 0:15 flags, 16:31 version */
+	u32 offsets[TRX_MAX_OFFSET];	/* Offsets of partitions from start of header */
 };
 
+#define ROUNDUP(x, y) ((((x)+((y)-1))/(y))*(y))
+#define NVRAM_SPACE 0x8000
+#define WINDOW_ADDR 0x1FC00000
+#define WINDOW_SIZE 0x400000
+#define BUSWIDTH 2
 
-int parse_cfe_partitions( struct mtd_info *master, struct mtd_partition **pparts)
-{
-       int nrparts = 2, curpart = 0; // CFE and NVRAM always present.
-       struct bcm963xx_cfe_map {
-       unsigned char tagVersion[4];                            // Version of the image tag
-       unsigned char sig_1[20];                                // Company Line 1
-       unsigned char sig_2[14];                                // Company Line 2
-       unsigned char chipid[6];                                        // Chip this image is for
-       unsigned char boardid[16];                              // Board name
-       unsigned char bigEndian[2];                             // Map endianness -- 1 BE 0 LE
-       unsigned char totalLength[IMAGE_LEN];           //Total length of image
-       unsigned char cfeAddress[ADDRESS_LEN];  // Address in memory of CFE
-       unsigned char cfeLength[IMAGE_LEN];             // Size of CFE
-       unsigned char rootAddress[ADDRESS_LEN];         // Address in memory of rootfs
-       unsigned char rootLength[IMAGE_LEN];            // Size of rootfs
-       unsigned char kernelAddress[ADDRESS_LEN];       // Address in memory of kernel
-       unsigned char kernelLength[IMAGE_LEN];  // Size of kernel
-       unsigned char dualImage[2];                             // Unused at present
-       unsigned char inactiveFlag[2];                  // Unused at present
-       unsigned char reserved1[74];                            // Reserved area not in use
-       unsigned char imageCRC[4];                              // CRC32 of images
-       unsigned char reserved2[16];                            // Unused at present
-       unsigned char headerCRC[4];                             // CRC32 of header excluding tagVersion
-       unsigned char reserved3[16];                            // Unused at present
-       } *buf;
-       struct mtd_partition *parts;
-       int ret;
-       size_t retlen;
-       unsigned int rootfsaddr, kerneladdr, spareaddr;
-       unsigned int rootfslen, kernellen, sparelen, totallen;
-       int namelen = 0;
-       int i;
-       // Allocate memory for buffer
-       buf = vmalloc(sizeof(struct bcm963xx_cfe_map));
-
-       if (!buf)
-               return -ENOMEM;
-
-       // Get the tag
-       ret = master->read(master,master->erasesize,sizeof(struct bcm963xx_cfe_map), &retlen, (void *)buf);
-       if (retlen != sizeof(struct bcm963xx_cfe_map)){
-               vfree(buf);
-               return -EIO;
-       };
-       printk("bcm963xx: CFE boot tag found with version %s and board type %s.\n",buf->tagVersion,buf->boardid);
-       // Get the values and calculate
-       sscanf(buf->rootAddress,"%u", &rootfsaddr);
-       rootfsaddr = rootfsaddr - EXTENDED_SIZE;
-       sscanf(buf->rootLength, "%u", &rootfslen);
-       sscanf(buf->kernelAddress, "%u", &kerneladdr);
-       kerneladdr = kerneladdr - EXTENDED_SIZE;
-       sscanf(buf->kernelLength, "%u", &kernellen);
-       sscanf(buf->totalLength, "%u", &totallen);
-       spareaddr = ROUNDUP(totallen,master->erasesize) + master->erasesize;
-       sparelen = master->size - spareaddr - master->erasesize;
-       // Determine number of partitions
-       namelen = 8;
-       if (rootfslen > 0){
-               nrparts++;
-               namelen =+ 6;
-       };
-       if (kernellen > 0){
-               nrparts++;
-               namelen =+ 6;
-       };
-       if (sparelen > 0){
-               nrparts++;
-               namelen =+ 6;
-       };
-       // Ask kernel for more memory.
-       parts = kmalloc(sizeof(*parts)*nrparts+10*nrparts, GFP_KERNEL);
-       if (!parts){
-               vfree(buf);
-               return -ENOMEM;
-       };
-       memset(parts,0,sizeof(*parts)*nrparts+10*nrparts);
-       // Start building partition list
-       parts[curpart].name = "CFE";
-       parts[curpart].offset = 0;
-       parts[curpart].size = master->erasesize;
-       curpart++;
-       if (kernellen > 0){
-               parts[curpart].name = "Kernel";
-               parts[curpart].offset = kerneladdr;
-               parts[curpart].size = kernellen;
-               curpart++;
-       };
-       if (rootfslen > 0){
-               parts[curpart].name = "Rootfs";
-               parts[curpart].offset = rootfsaddr;
-               parts[curpart].size = rootfslen;
-               curpart++;
-       };
-       if (sparelen > 0){
-               parts[curpart].name = "OpenWrt";
-               parts[curpart].offset = spareaddr;
-               parts[curpart].size = sparelen;
-               curpart++;
-       };
-       parts[curpart].name = "NVRAM";
-       parts[curpart].offset = master->size - master->erasesize;
-       parts[curpart].size = master->erasesize;
-       for (i = 0; i < nrparts; i++) {
-          printk("bcm963xx: Partition %d is %s offset %x and length %x\n", i, parts[i].name, parts[i].offset, parts[i].size);
-       }
-       *pparts = parts;
-       vfree(buf);
-       return nrparts;
+#define EXTENDED_SIZE 0xBFC00000       /* Extended flash address */
+
+static struct mtd_info *bcm963xx_mtd;
+
+static struct map_info bcm963xx_map = {
+	.name 		= "Physically mapped flash",
+	.size	 	= WINDOW_SIZE,
+	.bankwidth 	= BUSWIDTH,
+	.phys		= WINDOW_ADDR,
 };
 
+#ifdef CONFIG_MTD_PARTITIONS
+
 static struct mtd_partition bcm963xx_parts[] = {
-        { name: "bootloader",  size: 0,        offset: 0,      mask_flags: MTD_WRITEABLE },
-        { name: "rootfs",              size: 0,        offset: 0},
-        { name: "jffs2",        size: 5 * 0x10000,      offset: 57*0x10000}
+	{ name: "cfe",	offset: 0, size: 0, mask_flags: MTD_WRITEABLE, },
+	{ name: "linux", offset: 0, size: 0, },
+	{ name: "rootfs", offset: 0, size: 0, },
+	{ name: "nvram", offset: 0, size: 0, },
+	{ name: "OpenWrt", offset: 0, size: 0, },
+	{ name: NULL, },
 };
 
-static int bcm963xx_parts_size = sizeof(bcm963xx_parts) / sizeof(bcm963xx_parts[0]);
+static int __init
+find_cfe_size(struct mtd_info *mtd, size_t size)
+{
+	struct trx_header *trx;
+	unsigned char buf[512];
+	int off;
+	size_t len;
+	int blocksize;
+
+	trx = (struct trx_header *) buf;
+
+	blocksize = mtd->erasesize;
+	if (blocksize < 0x10000)
+		blocksize = 0x10000;
 
-static int bcm963xx_detect_cfe(struct mtd_info *master)
+	for (off = (128*1024); off < size; off += blocksize) {
+		memset(buf, 0xe5, sizeof(buf));
+
+		/*
+		 * Read into buffer 
+		 */
+		if (mtd->read(mtd, off, sizeof(buf), &len, buf) ||
+		    len != sizeof(buf))
+			continue;
+
+		/* found a TRX header */
+		if (le32_to_cpu(trx->magic) == TRX_MAGIC) {
+			goto found;
+		}
+	}
+
+	printk(KERN_NOTICE
+	       "%s: Couldn't find bootloader size\n",
+	       mtd->name);
+	return -1;
+
+ found:
+	printk(KERN_NOTICE "bootloader size: %d\n", off);
+	return off;
+
+}
+
+/*
+ * Copied from mtdblock.c
+ *
+ * Cache stuff...
+ * 
+ * Since typical flash erasable sectors are much larger than what Linux's
+ * buffer cache can handle, we must implement read-modify-write on flash
+ * sectors for each block write requests.  To avoid over-erasing flash sectors
+ * and to speed things up, we locally cache a whole flash sector while it is
+ * being written to until a different sector is required.
+ */
+
+static void erase_callback(struct erase_info *done)
 {
-       int idoffset = 0x4e0;
-       static char idstring[8] = "CFE1CFE1";
-       char buf[8];
-       int ret;
-       size_t retlen;
-
-       ret = master->read(master, idoffset, 8, &retlen, (void *)buf);
-       printk("bcm963xx: Read Signature value of %s\n", buf);
-       return strcmp(idstring,buf);
+	wait_queue_head_t *wait_q = (wait_queue_head_t *)done->priv;
+	wake_up(wait_q);
 }
 
-static int __init bcm963xx_mtd_init(void)
+static int erase_write (struct mtd_info *mtd, unsigned long pos, 
+			int len, const char *buf)
 {
-       printk("bcm963xx: 0x%08x at 0x%08x\n", WINDOW_SIZE, WINDOW_ADDR);
-       bcm963xx_map.virt = ioremap(WINDOW_ADDR, WINDOW_SIZE);
-
-       if (!bcm963xx_map.virt) {
-               printk("bcm963xx: Failed to ioremap\n");
-               return -EIO;
-       }
-
-       simple_map_init(&bcm963xx_map);
-
-       bcm963xx_mtd_info = do_map_probe("cfi_probe", &bcm963xx_map);
-
-       if (bcm963xx_mtd_info) {
-               bcm963xx_mtd_info->owner = THIS_MODULE;
-
-               //if (boot_loader_type == BOOT_CFE)
-               if (bcm963xx_detect_cfe(bcm963xx_mtd_info) == 0)
-               {
-                       int parsed_nr_parts = 0;
-                       char * part_type;
-                       printk("bcm963xx: CFE bootloader detected\n");
-                       //add_mtd_device(bcm963xx_mtd_info);
-                       //add_mtd_partitions(bcm963xx_mtd_info, bcm963xx_parts, bcm963xx_parts_size);
-                       if (parsed_nr_parts == 0) {
-                               int ret = parse_cfe_partitions(bcm963xx_mtd_info, &parsed_parts);
-                               if (ret > 0) {
-                                       part_type = "CFE";
-                                       parsed_nr_parts = ret;
-                               }
-                       }
-                       add_mtd_partitions(bcm963xx_mtd_info, parsed_parts, parsed_nr_parts);
-                       return 0;
-               }
-               else
-               {
-                       int parsed_nr_parts = 0;
-                       char * part_type;
-
-                       if (bcm963xx_mtd_info->size > 0x00400000) {
-                               printk("Support for extended flash memory size : 0x%08X ; ONLY 64MBIT SUPPORT\n", bcm963xx_mtd_info->size);
-                               bcm963xx_map.virt = (unsigned long)(EXTENDED_SIZE);
-                       }
+	struct erase_info erase;
+	DECLARE_WAITQUEUE(wait, current);
+	wait_queue_head_t wait_q;
+	size_t retlen;
+	int ret;
+
+	/*
+	 * First, let's erase the flash block.
+	 */
+
+	init_waitqueue_head(&wait_q);
+	erase.mtd = mtd;
+	erase.callback = erase_callback;
+	erase.addr = pos;
+	erase.len = len;
+	erase.priv = (u_long)&wait_q;
+
+	set_current_state(TASK_INTERRUPTIBLE);
+	add_wait_queue(&wait_q, &wait);
+
+	ret = mtd->erase(mtd, &erase);
+	if (ret) {
+		set_current_state(TASK_RUNNING);
+		remove_wait_queue(&wait_q, &wait);
+		printk (KERN_WARNING "erase of region [0x%lx, 0x%x] "
+				     "on \"%s\" failed\n",
+			pos, len, mtd->name);
+		return ret;
+	}
+
+	schedule();  /* Wait for erase to finish. */
+	remove_wait_queue(&wait_q, &wait);
+
+	/*
+	 * Next, writhe data to flash.
+	 */
+
+	ret = mtd->write (mtd, pos, len, &retlen, buf);
+	if (ret)
+		return ret;
+	if (retlen != len)
+		return -EIO;
+	return 0;
+}
+
+
+
+
+static int __init
+find_root(struct mtd_info *mtd, size_t size, struct mtd_partition *part)
+{
+	struct trx_header trx, *trx2;
+	unsigned char buf[512], *block;
+	int off, blocksize;
+	u32 i, crc = ~0;
+	size_t len;
+	struct squashfs_super_block *sb = (struct squashfs_super_block *) buf;
+
+	blocksize = mtd->erasesize;
+	if (blocksize < 0x10000)
+		blocksize = 0x10000;
+
+	for (off = (128*1024); off < size; off += blocksize) {
+		memset(&trx, 0xe5, sizeof(trx));
+
+		/*
+		 * Read into buffer 
+		 */
+		if (mtd->read(mtd, off, sizeof(trx), &len, (char *) &trx) ||
+		    len != sizeof(trx))
+			continue;
+
+		/* found a TRX header */
+		if (le32_to_cpu(trx.magic) == TRX_MAGIC) {
+			part->offset = le32_to_cpu(trx.offsets[2]) ? : 
+				le32_to_cpu(trx.offsets[1]);
+			part->size = le32_to_cpu(trx.len); 
+
+			part->size -= part->offset;
+			part->offset += off;
+
+			goto found;
+		}
+	}
+
+	printk(KERN_NOTICE
+	       "%s: Couldn't find root filesystem\n",
+	       mtd->name);
+	return -1;
+
+ found:
+	if (part->size == 0)
+		return 0;
+	
+	if (mtd->read(mtd, part->offset, sizeof(buf), &len, buf) || len != sizeof(buf))
+		return 0;
+
+	if (*((__u32 *) buf) == SQUASHFS_MAGIC) {
+		printk(KERN_INFO "%s: Filesystem type: squashfs, size=0x%x\n", mtd->name, (u32) sb->bytes_used);
+
+		/* Update the squashfs partition size based on the superblock info */
+		part->size = sb->bytes_used;
+		len = part->offset + part->size;
+		len +=  (mtd->erasesize - 1);
+		len &= ~(mtd->erasesize - 1);
+		part->size = len - part->offset;
+	} else if (*((__u16 *) buf) == JFFS2_MAGIC_BITMASK) {
+		printk(KERN_INFO "%s: Filesystem type: jffs2\n", mtd->name);
+
+		/* Move the squashfs outside of the trx */
+		part->size = 0;
+	} else {
+		printk(KERN_INFO "%s: Filesystem type: unknown\n", mtd->name);
+		return 0;
+	}
+
+	if (trx.len != part->offset + part->size - off) {
+		/* Update the trx offsets and length */
+		trx.len = part->offset + part->size - off;
+	
+		/* Update the trx crc32 */
+		for (i = (u32) &(((struct trx_header *)NULL)->flag_version); i <= trx.len; i += sizeof(buf)) {
+			if (mtd->read(mtd, off + i, sizeof(buf), &len, buf) || len != sizeof(buf))
+				return 0;
+			crc = crc32_le(crc, buf, min(sizeof(buf), trx.len - i));
+		}
+		trx.crc32 = crc;
+
+		/* read first eraseblock from the trx */
+		block = kmalloc(mtd->erasesize, GFP_KERNEL);
+		trx2 = (struct trx_header *) block;
+		if (mtd->read(mtd, off, mtd->erasesize, &len, block) || len != mtd->erasesize) {
+			printk("Error accessing the first trx eraseblock\n");
+			return 0;
+		}
+		
+		printk("Updating TRX offsets and length:\n");
+		printk("old trx = [0x%08x, 0x%08x, 0x%08x], len=0x%08x crc32=0x%08x\n", trx2->offsets[0], trx2->offsets[1], trx2->offsets[2], trx2->len, trx2->crc32);
+		printk("new trx = [0x%08x, 0x%08x, 0x%08x], len=0x%08x crc32=0x%08x\n",   trx.offsets[0],   trx.offsets[1],   trx.offsets[2],   trx.len, trx.crc32);
+
+		/* Write updated trx header to the flash */
+		memcpy(block, &trx, sizeof(trx));
+		if (mtd->unlock)
+			mtd->unlock(mtd, off, mtd->erasesize);
+		erase_write(mtd, off, mtd->erasesize, block);
+		if (mtd->sync)
+			mtd->sync(mtd);
+		kfree(block);
+		printk("Done\n");
+	}
+	
+	return part->size;
+}
+
+struct mtd_partition * __init
+init_mtd_partitions(struct mtd_info *mtd, size_t size)
+{
+	int cfe_size;
+
+	if ((cfe_size = find_cfe_size(mtd,size)) < 0)
+		return NULL;
+
+	/* boot loader */
+	bcm963xx_parts[0].offset = 0;
+	bcm963xx_parts[0].size   = cfe_size;
+
+	/* nvram */
+	if (cfe_size != 384 * 1024) {
+		bcm963xx_parts[3].offset = size - ROUNDUP(NVRAM_SPACE, mtd->erasesize);
+		bcm963xx_parts[3].size   = ROUNDUP(NVRAM_SPACE, mtd->erasesize);
+	} else {
+		/* nvram (old 128kb config partition on netgear wgt634u) */
+		bcm963xx_parts[3].offset = bcm963xx_parts[0].size;
+		bcm963xx_parts[3].size   = ROUNDUP(NVRAM_SPACE, mtd->erasesize);
+	}
+
+	/* linux (kernel and rootfs) */
+	if (cfe_size != 384 * 1024) {
+		bcm963xx_parts[1].offset = bcm963xx_parts[0].size;
+		bcm963xx_parts[1].size   = bcm963xx_parts[3].offset - 
+			bcm963xx_parts[1].offset;
+	} else {
+		/* do not count the elf loader, which is on one block */
+		bcm963xx_parts[1].offset = bcm963xx_parts[0].size + 
+			bcm963xx_parts[3].size + mtd->erasesize;
+		bcm963xx_parts[1].size   = size - 
+			bcm963xx_parts[0].size - 
+			(2*bcm963xx_parts[3].size) - 
+			mtd->erasesize;
+	}
+
+	/* find and size rootfs */
+	if (find_root(mtd,size,&bcm963xx_parts[2])==0) {
+		/* entirely jffs2 */
+		bcm963xx_parts[4].name = NULL;
+		bcm963xx_parts[2].size = size - bcm963xx_parts[2].offset - 
+				bcm963xx_parts[3].size;
+	} else {
+		/* legacy setup */
+		/* calculate leftover flash, and assign it to the jffs2 partition */
+		if (cfe_size != 384 * 1024) {
+			bcm963xx_parts[4].offset = bcm963xx_parts[2].offset + 
+				bcm963xx_parts[2].size;
+			if ((bcm963xx_parts[4].offset % mtd->erasesize) > 0) {
+				bcm963xx_parts[4].offset += mtd->erasesize - 
+					(bcm963xx_parts[4].offset % mtd->erasesize);
+			}
+			bcm963xx_parts[4].size = bcm963xx_parts[3].offset - 
+				bcm963xx_parts[4].offset;
+		} else {
+			bcm963xx_parts[4].offset = bcm963xx_parts[2].offset + 
+				bcm963xx_parts[2].size;
+			if ((bcm963xx_parts[4].offset % mtd->erasesize) > 0) {
+				bcm963xx_parts[4].offset += mtd->erasesize - 
+					(bcm963xx_parts[4].offset % mtd->erasesize);
+			}
+			bcm963xx_parts[4].size = size - bcm963xx_parts[3].size - 
+				bcm963xx_parts[4].offset;
+		}
+	}
+
+	return bcm963xx_parts;
+}
+#endif
+
+int __init init_bcm963xx_map(void)
+{
+	size_t size;
+	int ret = 0;
+#ifdef CONFIG_MTD_PARTITIONS
+	struct mtd_partition *parts;
+	int i;
+#endif
+
+	printk("BCM963xx flash init: 0x%08x 0x%08x\n", WINDOW_ADDR, WINDOW_SIZE);
+	bcm963xx_map.virt = ioremap_nocache(WINDOW_ADDR, WINDOW_SIZE);
+
+	if (!bcm963xx_map.virt) {
+		printk("Failed to ioremap\n");
+		return -EIO;
+	}
+	simple_map_init(&bcm963xx_map);
+	
+	if (!(bcm963xx_mtd = do_map_probe("cfi_probe", &bcm963xx_map))) {
+		printk("Failed to do_map_probe\n");
+		iounmap((void *)bcm963xx_map.virt);
+		return -ENXIO;
+	}
+
+	bcm963xx_mtd->owner = THIS_MODULE;
+
+	size = bcm963xx_mtd->size;
+
+	printk(KERN_NOTICE "Flash device: 0x%x at 0x%x\n", size, WINDOW_ADDR);
+
+#ifdef CONFIG_MTD_PARTITIONS
+	if (boot_loader_type == BOOT_LOADER_CFE) {
+		parts = init_mtd_partitions(bcm963xx_mtd, size);
+		for (i = 0; parts[i].name; i++);
+			ret = add_mtd_partitions(bcm963xx_mtd, parts, i);
+		if (ret) {
+			printk(KERN_ERR "Flash: add_mtd_partitions failed\n");
+			goto fail;
+		}
+	}
+	else {
+		int parsed_nr_parts = 0;
+		char * part_type;
+
+		if (bcm963xx_mtd->size > 0x00400000) {
+			printk("Support for extended flash memory size : 0x%08X ; ONLY 64MBIT SUPPORT\n", bcm963xx_mtd->size);
+			bcm963xx_map.virt = (unsigned long)EXTENDED_SIZE;
+		}
 
 #ifdef CONFIG_MTD_REDBOOT_PARTS
-                       if (parsed_nr_parts == 0) {
-                               int ret = parse_redboot_partitions(bcm963xx_mtd_info, &parsed_parts, 0);
-                               if (ret > 0) {
-                                       part_type = "RedBoot";
-                                       parsed_nr_parts = ret;
-                               }
-                       }
+		if (parsed_nr_parts == 0) {
+			int ret = parse_redboot_partitions(bcm963xx_mtd, &parsed_parts, 0);
+			if (ret > 0) {
+				part_type = "RedBoot";
+				parsed_nr_parts = ret;
+			}
+		}
+#endif
+		add_mtd_partitions(bcm963xx_mtd, parsed_parts, parsed_nr_parts);	
 #endif
-                       add_mtd_partitions(bcm963xx_mtd_info, parsed_parts, parsed_nr_parts);
+	}
+	return 0;
 
-                       return 0;
-               }
-       }
-       iounmap(bcm963xx_map.virt);
-       return -ENXIO;
+ fail:
+	if (bcm963xx_mtd)
+		map_destroy(bcm963xx_mtd);
+	if (bcm963xx_map.virt)
+		iounmap((void *)bcm963xx_map.virt);
+	bcm963xx_map.virt = 0;
+	return ret;
 }
 
-static void __exit bcm963xx_mtd_cleanup(void)
+void __exit cleanup_bcm963xx_map(void)
 {
-       if (bcm963xx_mtd_info) {
-               del_mtd_partitions(bcm963xx_mtd_info);
-               map_destroy(bcm963xx_mtd_info);
-       }
-
-       if (bcm963xx_map.virt) {
-               iounmap(bcm963xx_map.virt);
-               bcm963xx_map.virt = 0;
-       }
+#ifdef CONFIG_MTD_PARTITIONS
+	del_mtd_partitions(bcm963xx_mtd);
+#endif
+	map_destroy(bcm963xx_mtd);
+	iounmap((void *)bcm963xx_map.virt);
 }
 
-module_init(bcm963xx_mtd_init);
-module_exit(bcm963xx_mtd_cleanup);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Florian Fainelli <florian@openwrt.org> Mike Albon <malbon@openwrt.org>");
+module_init(init_bcm963xx_map);
+module_exit(cleanup_bcm963xx_map);
diff --git a/target/linux/brcm63xx-2.6/files/drivers/serial/bcm63xx_cons.c b/target/linux/brcm63xx-2.6/files/drivers/serial/bcm63xx_cons.c
index 282e7d61a..f024f23c6 100644
--- a/target/linux/brcm63xx-2.6/files/drivers/serial/bcm63xx_cons.c
+++ b/target/linux/brcm63xx-2.6/files/drivers/serial/bcm63xx_cons.c
@@ -44,6 +44,8 @@
 #include <board.h>
 #include <bcm_map_part.h>
 #include <bcm_intr.h>
+#include <6348_map_part.h>
+#include <6348_intr.h>
 
 static DEFINE_SPINLOCK(bcm963xx_serial_lock);
 
diff --git a/target/linux/brcm63xx-2.6/files/include/asm-mips/cfe.h b/target/linux/brcm63xx-2.6/files/include/asm-mips/cfe.h
new file mode 100644
index 000000000..47c3f5613
--- /dev/null
+++ b/target/linux/brcm63xx-2.6/files/include/asm-mips/cfe.h
@@ -0,0 +1,189 @@
+/*
+ * Broadcom Common Firmware Environment (CFE) support
+ *
+ * Copyright 2000, 2001, 2002
+ * Broadcom Corporation. All rights reserved.
+ *
+ * Copyright (C) 2006 Michael Buesch
+ *
+ * Original Authors:  Mitch Lichtenberg, Chris Demetriou
+ *
+ * This software is furnished under license and may be used and copied only
+ * in accordance with the following terms and conditions.  Subject to these
+ * conditions, you may download, copy, install, use, modify and distribute
+ * modified or unmodified copies of this software in source and/or binary
+ * form. No title or ownership is transferred hereby.
+ *
+ * 1) Any source code used, modified or distributed must reproduce and
+ *    retain this copyright notice and list of conditions as they appear in
+ *    the source file.
+ *
+ * 2) No right is granted to use any trade name, trademark, or logo of
+ *    Broadcom Corporation.  The "Broadcom Corporation" name may not be
+ *    used to endorse or promote products derived from this software
+ *    without the prior written permission of Broadcom Corporation.
+ *
+ * 3) THIS SOFTWARE IS PROVIDED "AS-IS" AND ANY EXPRESS OR IMPLIED
+ *    WARRANTIES, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF
+ *    MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR
+ *    NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM BE LIABLE
+ *    FOR ANY DAMAGES WHATSOEVER, AND IN PARTICULAR, BROADCOM SHALL NOT BE
+ *    LIABLE FOR DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ *    CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ *    SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ *    BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ *    WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ *    OR OTHERWISE), EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef LINUX_CFE_API_H_
+#define LINUX_CFE_API_H_
+
+#include <linux/types.h>
+
+
+#define CFE_MI_RESERVED		0		/* memory is reserved, do not use */
+#define CFE_MI_AVAILABLE	1		/* memory is available */
+
+#define CFE_FLG_WARMSTART	0x00000001
+#define CFE_FLG_FULL_ARENA	0x00000001
+#define CFE_FLG_ENV_PERMANENT	0x00000001
+
+#define CFE_CPU_CMD_START	1
+#define CFE_CPU_CMD_STOP	0
+
+#define CFE_STDHANDLE_CONSOLE	0
+
+#define CFE_DEV_NETWORK 	1
+#define CFE_DEV_DISK		2
+#define CFE_DEV_FLASH		3
+#define CFE_DEV_SERIAL		4
+#define CFE_DEV_CPU		5
+#define CFE_DEV_NVRAM		6
+#define CFE_DEV_CLOCK           7
+#define CFE_DEV_OTHER		8
+#define CFE_DEV_MASK		0x0F
+
+#define CFE_CACHE_FLUSH_D	1
+#define CFE_CACHE_INVAL_I	2
+#define CFE_CACHE_INVAL_D	4
+#define CFE_CACHE_INVAL_L2	8
+
+#define CFE_FWI_64BIT		0x00000001
+#define CFE_FWI_32BIT		0x00000002
+#define CFE_FWI_RELOC		0x00000004
+#define CFE_FWI_UNCACHED	0x00000008
+#define CFE_FWI_MULTICPU	0x00000010
+#define CFE_FWI_FUNCSIM		0x00000020
+#define CFE_FWI_RTLSIM		0x00000040
+
+struct cfe_fwinfo {
+	s64 version;		/* major, minor, eco version */
+	s64 totalmem;		/* total installed mem */
+	s64 flags;		/* various flags */
+	s64 boardid;		/* board ID */
+	s64 bootarea_va;	/* VA of boot area */
+	s64 bootarea_pa;	/* PA of boot area */
+	s64 bootarea_size;	/* size of boot area */
+};
+
+
+/* The public CFE API */
+
+int cfe_present(void);	/* Check if we booted from CFE. Returns bool */
+
+int cfe_getticks(s64 *ticks);
+int cfe_close(int handle);
+int cfe_cpu_start(int cpu, void (*fn)(void), long sp, long gp, long a1);
+int cfe_cpu_stop(int cpu);
+int cfe_enumenv(int idx, char *name, int namelen, char *val, int vallen);
+int cfe_enumdev(int idx, char *name, int namelen);
+int cfe_enummem(int idx, int flags, u64 *start, u64 *length,
+		u64 *type);
+int cfe_exit(int warm, int status);
+int cfe_flushcache(int flags);
+int cfe_getdevinfo(char *name);
+int cfe_getenv(char *name, char *dest, int destlen);
+int cfe_getfwinfo(struct cfe_fwinfo *info);
+int cfe_getstdhandle(int handletype);
+int cfe_inpstat(int handle);
+int cfe_ioctl(int handle, unsigned int ioctlnum, unsigned char *buffer,
+	      int length, int *retlen, u64 offset);
+int cfe_open(char *name);
+int cfe_read(int handle, unsigned char *buffer, int length);
+int cfe_readblk(int handle, s64 offset, unsigned char *buffer, int length);
+int cfe_setenv(char *name, char *val);
+int cfe_write(int handle, unsigned char *buffer, int length);
+int cfe_writeblk(int handle, s64 offset, unsigned char *buffer,
+		 int length);
+
+
+/* High level API */
+
+/* Print some information to CFE's console (most likely serial line) */
+int cfe_printk(const char *fmt, ...) __attribute__((format(printf, 1, 2)));
+int cfe_vprintk(const char *fmt, va_list args);
+
+
+
+/* Error codes returned by the low API functions */
+
+#define CFE_ISERR(errcode)	(errcode < 0)
+
+#define CFE_OK			 0
+#define CFE_ERR                 -1	/* generic error */
+#define CFE_ERR_INV_COMMAND	-2
+#define CFE_ERR_EOF		-3
+#define CFE_ERR_IOERR		-4
+#define CFE_ERR_NOMEM		-5
+#define CFE_ERR_DEVNOTFOUND	-6
+#define CFE_ERR_DEVOPEN		-7
+#define CFE_ERR_INV_PARAM	-8
+#define CFE_ERR_ENVNOTFOUND	-9
+#define CFE_ERR_ENVREADONLY	-10
+
+#define CFE_ERR_NOTELF		-11
+#define CFE_ERR_NOT32BIT 	-12
+#define CFE_ERR_WRONGENDIAN 	-13
+#define CFE_ERR_BADELFVERS 	-14
+#define CFE_ERR_NOTMIPS 	-15
+#define CFE_ERR_BADELFFMT 	-16
+#define CFE_ERR_BADADDR 	-17
+
+#define CFE_ERR_FILENOTFOUND	-18
+#define CFE_ERR_UNSUPPORTED	-19
+
+#define CFE_ERR_HOSTUNKNOWN	-20
+
+#define CFE_ERR_TIMEOUT		-21
+
+#define CFE_ERR_PROTOCOLERR	-22
+
+#define CFE_ERR_NETDOWN		-23
+#define CFE_ERR_NONAMESERVER	-24
+
+#define CFE_ERR_NOHANDLES	-25
+#define CFE_ERR_ALREADYBOUND	-26
+
+#define CFE_ERR_CANNOTSET	-27
+#define CFE_ERR_NOMORE		-28
+#define CFE_ERR_BADFILESYS	-29
+#define CFE_ERR_FSNOTAVAIL	-30
+
+#define CFE_ERR_INVBOOTBLOCK	-31
+#define CFE_ERR_WRONGDEVTYPE	-32
+#define CFE_ERR_BBCHECKSUM	-33
+#define CFE_ERR_BOOTPROGCHKSUM	-34
+
+#define CFE_ERR_LDRNOTAVAIL	-35
+
+#define CFE_ERR_NOTREADY	-36
+
+#define CFE_ERR_GETMEM          -37
+#define CFE_ERR_SETMEM          -38
+
+#define CFE_ERR_NOTCONN		-39
+#define CFE_ERR_ADDRINUSE	-40
+
+
+#endif /* LINUX_CFE_API_H_ */
diff --git a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/6338_intr.h b/target/linux/brcm63xx-2.6/files/include/asm-mips/mach-bcm963xx/6338_intr.h
index 3a6e00a2a..3a6e00a2a 100644
--- a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/6338_intr.h
+++ b/target/linux/brcm63xx-2.6/files/include/asm-mips/mach-bcm963xx/6338_intr.h
diff --git a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/6338_map_part.h b/target/linux/brcm63xx-2.6/files/include/asm-mips/mach-bcm963xx/6338_map_part.h
index 70bf80734..70bf80734 100644
--- a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/6338_map_part.h
+++ b/target/linux/brcm63xx-2.6/files/include/asm-mips/mach-bcm963xx/6338_map_part.h
diff --git a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/6345_intr.h b/target/linux/brcm63xx-2.6/files/include/asm-mips/mach-bcm963xx/6345_intr.h
index fb77cbcbe..fb77cbcbe 100644
--- a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/6345_intr.h
+++ b/target/linux/brcm63xx-2.6/files/include/asm-mips/mach-bcm963xx/6345_intr.h
diff --git a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/6345_map_part.h b/target/linux/brcm63xx-2.6/files/include/asm-mips/mach-bcm963xx/6345_map_part.h
index 78e59a439..78e59a439 100644
--- a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/6345_map_part.h
+++ b/target/linux/brcm63xx-2.6/files/include/asm-mips/mach-bcm963xx/6345_map_part.h
diff --git a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/6348_intr.h b/target/linux/brcm63xx-2.6/files/include/asm-mips/mach-bcm963xx/6348_intr.h
index da3ee9fc3..da3ee9fc3 100644
--- a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/6348_intr.h
+++ b/target/linux/brcm63xx-2.6/files/include/asm-mips/mach-bcm963xx/6348_intr.h
diff --git a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/6348_map_part.h b/target/linux/brcm63xx-2.6/files/include/asm-mips/mach-bcm963xx/6348_map_part.h
index 199ef9e15..199ef9e15 100644
--- a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/6348_map_part.h
+++ b/target/linux/brcm63xx-2.6/files/include/asm-mips/mach-bcm963xx/6348_map_part.h
diff --git a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/bcmTag.h b/target/linux/brcm63xx-2.6/files/include/asm-mips/mach-bcm963xx/bcmTag.h
index e902e96aa..e902e96aa 100644
--- a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/bcmTag.h
+++ b/target/linux/brcm63xx-2.6/files/include/asm-mips/mach-bcm963xx/bcmTag.h
diff --git a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/bcm_intr.h b/target/linux/brcm63xx-2.6/files/include/asm-mips/mach-bcm963xx/bcm_intr.h
index 8c56840f4..8c56840f4 100644
--- a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/bcm_intr.h
+++ b/target/linux/brcm63xx-2.6/files/include/asm-mips/mach-bcm963xx/bcm_intr.h
diff --git a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/bcm_map_part.h b/target/linux/brcm63xx-2.6/files/include/asm-mips/mach-bcm963xx/bcm_map_part.h
index ccfe965dc..ccfe965dc 100644
--- a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/bcm_map_part.h
+++ b/target/linux/brcm63xx-2.6/files/include/asm-mips/mach-bcm963xx/bcm_map_part.h
diff --git a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/bcmpci.h b/target/linux/brcm63xx-2.6/files/include/asm-mips/mach-bcm963xx/bcmpci.h
index cecbd995a..cecbd995a 100644
--- a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/bcmpci.h
+++ b/target/linux/brcm63xx-2.6/files/include/asm-mips/mach-bcm963xx/bcmpci.h
diff --git a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/bcmtypes.h b/target/linux/brcm63xx-2.6/files/include/asm-mips/mach-bcm963xx/bcmtypes.h
index 43aebc9c0..43aebc9c0 100644
--- a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/bcmtypes.h
+++ b/target/linux/brcm63xx-2.6/files/include/asm-mips/mach-bcm963xx/bcmtypes.h
diff --git a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/board.h b/target/linux/brcm63xx-2.6/files/include/asm-mips/mach-bcm963xx/board.h
index e674cb10d..e674cb10d 100644
--- a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/board.h
+++ b/target/linux/brcm63xx-2.6/files/include/asm-mips/mach-bcm963xx/board.h
diff --git a/target/linux/brcm63xx-2.6/files/include/asm-mips/mach-bcm963xx/bootloaders.h b/target/linux/brcm63xx-2.6/files/include/asm-mips/mach-bcm963xx/bootloaders.h
new file mode 100644
index 000000000..84eeafe85
--- /dev/null
+++ b/target/linux/brcm63xx-2.6/files/include/asm-mips/mach-bcm963xx/bootloaders.h
@@ -0,0 +1,6 @@
+#define ADSL_SDRAM_IMAGE_SIZE (384*1024)
+
+#define BOOT_LOADER_UNKNOWN 0
+#define BOOT_LOADER_CFE 1
+#define BOOT_LOADER_REDBOOT 2
+#define BOOT_LOADER_LAST 2
diff --git a/target/linux/brcm63xx-2.6/image/Makefile b/target/linux/brcm63xx-2.6/image/Makefile
index 51c658a09..d930af850 100644
--- a/target/linux/brcm63xx-2.6/image/Makefile
+++ b/target/linux/brcm63xx-2.6/image/Makefile
@@ -17,17 +17,32 @@ LOADER_MAKEOPTS= \
 		KERNEL_ENTRY=$(KERNEL_ENTRY) \
 		RAMSIZE=$(RAMSIZE)
 
+define trxalign/jffs2-128k
+-a 0x20000
+endef
+define trxalign/jffs2-64k
+-a 0x10000
+endef
+define trxalign/squashfs
+-a 1024
+endef
+
 define Build/Clean
-	$(MAKE) -C $(GENERIC_PLATFORM_DIR)/image/lzma-loader $(LOADER_MAKEOPTS) clean
+	$(MAKE) -C lzma-loader clean
 endef
 
 define Image/Prepare
 	cat $(KDIR)/vmlinux | $(STAGING_DIR)/bin/lzma e -si -so -eos -lc1 -lp2 -pb2 > $(KDIR)/vmlinux.lzma
-	$(MAKE) -C $(GENERIC_PLATFORM_DIR)/image/lzma-loader $(LOADER_MAKEOPTS) clean compile
+	rm -f $(KDIR)/loader.gz
+	$(MAKE) -C lzma-loader \
+		BUILD_DIR="$(KDIR)" \
+		TARGET="$(KDIR)" \
+		clean install
+	echo -ne "\\x00" >> $(KDIR)/loader.gz
 endef
 
 define Image/Build
-	cp $(KDIR)/vmlinux $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1).img
+	$(STAGING_DIR)/bin/trx -o $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1).trx -f $(KDIR)/loader.gz -f $(KDIR)/vmlinux.lzma $(call trxalign/$(1)) -f $(KDIR)/root.$(1)
 endef
 
 $(eval $(call BuildImage))
diff --git a/target/linux/brcm63xx-2.6/image/lzma-loader/Makefile b/target/linux/brcm63xx-2.6/image/lzma-loader/Makefile
new file mode 100644
index 000000000..b56cbaab0
--- /dev/null
+++ b/target/linux/brcm63xx-2.6/image/lzma-loader/Makefile
@@ -0,0 +1,34 @@
+# 
+# Copyright (C) 2006 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+# $Id$
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME := lzma-loader
+PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)
+
+$(PKG_BUILD_DIR)/.prepared:
+	mkdir $(PKG_BUILD_DIR)
+	$(CP) ./src/* $(PKG_BUILD_DIR)/
+	touch $@
+
+$(PKG_BUILD_DIR)/loader.gz: $(PKG_BUILD_DIR)/.prepared
+	$(MAKE) -C $(PKG_BUILD_DIR) CC="$(TARGET_CC)" \
+		LD="$(TARGET_CROSS)ld" CROSS_COMPILE="$(TARGET_CROSS)"
+
+download: 
+prepare: $(PKG_BUILD_DIR)/.prepared
+compile: $(PKG_BUILD_DIR)/loader.gz
+install:
+
+ifneq ($(TARGET),)
+install: compile
+	$(CP) $(PKG_BUILD_DIR)/loader.gz $(PKG_BUILD_DIR)/loader.elf $(TARGET)/
+endif
+
+clean:
+	rm -rf $(PKG_BUILD_DIR)
diff --git a/target/linux/brcm63xx-2.6/image/lzma-loader/src/LzmaDecode.c b/target/linux/brcm63xx-2.6/image/lzma-loader/src/LzmaDecode.c
new file mode 100644
index 000000000..951700bdd
--- /dev/null
+++ b/target/linux/brcm63xx-2.6/image/lzma-loader/src/LzmaDecode.c
@@ -0,0 +1,663 @@
+/*
+  LzmaDecode.c
+  LZMA Decoder
+  
+  LZMA SDK 4.05 Copyright (c) 1999-2004 Igor Pavlov (2004-08-25)
+  http://www.7-zip.org/
+
+  LZMA SDK is licensed under two licenses:
+  1) GNU Lesser General Public License (GNU LGPL)
+  2) Common Public License (CPL)
+  It means that you can select one of these two licenses and 
+  follow rules of that license.
+
+  SPECIAL EXCEPTION:
+  Igor Pavlov, as the author of this code, expressly permits you to 
+  statically or dynamically link your code (or bind by name) to the 
+  interfaces of this file without subjecting your linked code to the 
+  terms of the CPL or GNU LGPL. Any modifications or additions 
+  to this file, however, are subject to the LGPL or CPL terms.
+*/
+
+#include "LzmaDecode.h"
+
+#ifndef Byte
+#define Byte unsigned char
+#endif
+
+#define kNumTopBits 24
+#define kTopValue ((UInt32)1 << kNumTopBits)
+
+#define kNumBitModelTotalBits 11
+#define kBitModelTotal (1 << kNumBitModelTotalBits)
+#define kNumMoveBits 5
+
+typedef struct _CRangeDecoder
+{
+  Byte *Buffer;
+  Byte *BufferLim;
+  UInt32 Range;
+  UInt32 Code;
+  #ifdef _LZMA_IN_CB
+  ILzmaInCallback *InCallback;
+  int Result;
+  #endif
+  int ExtraBytes;
+} CRangeDecoder;
+
+Byte RangeDecoderReadByte(CRangeDecoder *rd)
+{
+  if (rd->Buffer == rd->BufferLim)
+  {
+    #ifdef _LZMA_IN_CB
+    UInt32 size;
+    rd->Result = rd->InCallback->Read(rd->InCallback, &rd->Buffer, &size);
+    rd->BufferLim = rd->Buffer + size;
+    if (size == 0)
+    #endif
+    {
+      rd->ExtraBytes = 1;
+      return 0xFF;
+    }
+  }
+  return (*rd->Buffer++);
+}
+
+/* #define ReadByte (*rd->Buffer++) */
+#define ReadByte (RangeDecoderReadByte(rd))
+
+void RangeDecoderInit(CRangeDecoder *rd,
+  #ifdef _LZMA_IN_CB
+    ILzmaInCallback *inCallback
+  #else
+    Byte *stream, UInt32 bufferSize
+  #endif
+    )
+{
+  int i;
+  #ifdef _LZMA_IN_CB
+  rd->InCallback = inCallback;
+  rd->Buffer = rd->BufferLim = 0;
+  #else
+  rd->Buffer = stream;
+  rd->BufferLim = stream + bufferSize;
+  #endif
+  rd->ExtraBytes = 0;
+  rd->Code = 0;
+  rd->Range = (0xFFFFFFFF);
+  for(i = 0; i < 5; i++)
+    rd->Code = (rd->Code << 8) | ReadByte;
+}
+
+#define RC_INIT_VAR UInt32 range = rd->Range; UInt32 code = rd->Code;        
+#define RC_FLUSH_VAR rd->Range = range; rd->Code = code;
+#define RC_NORMALIZE if (range < kTopValue) { range <<= 8; code = (code << 8) | ReadByte; }
+
+UInt32 RangeDecoderDecodeDirectBits(CRangeDecoder *rd, int numTotalBits)
+{
+  RC_INIT_VAR
+  UInt32 result = 0;
+  int i;
+  for (i = numTotalBits; i > 0; i--)
+  {
+    /* UInt32 t; */
+    range >>= 1;
+
+    result <<= 1;
+    if (code >= range)
+    {
+      code -= range;
+      result |= 1;
+    }
+    /*
+    t = (code - range) >> 31;
+    t &= 1;
+    code -= range & (t - 1);
+    result = (result + result) | (1 - t);
+    */
+    RC_NORMALIZE
+  }
+  RC_FLUSH_VAR
+  return result;
+}
+
+int RangeDecoderBitDecode(CProb *prob, CRangeDecoder *rd)
+{
+  UInt32 bound = (rd->Range >> kNumBitModelTotalBits) * *prob;
+  if (rd->Code < bound)
+  {
+    rd->Range = bound;
+    *prob += (kBitModelTotal - *prob) >> kNumMoveBits;
+    if (rd->Range < kTopValue)
+    {
+      rd->Code = (rd->Code << 8) | ReadByte;
+      rd->Range <<= 8;
+    }
+    return 0;
+  }
+  else
+  {
+    rd->Range -= bound;
+    rd->Code -= bound;
+    *prob -= (*prob) >> kNumMoveBits;
+    if (rd->Range < kTopValue)
+    {
+      rd->Code = (rd->Code << 8) | ReadByte;
+      rd->Range <<= 8;
+    }
+    return 1;
+  }
+}
+
+#define RC_GET_BIT2(prob, mi, A0, A1) \
+  UInt32 bound = (range >> kNumBitModelTotalBits) * *prob; \
+  if (code < bound) \
+    { A0; range = bound; *prob += (kBitModelTotal - *prob) >> kNumMoveBits; mi <<= 1; } \
+  else \
+    { A1; range -= bound; code -= bound; *prob -= (*prob) >> kNumMoveBits; mi = (mi + mi) + 1; } \
+  RC_NORMALIZE
+
+#define RC_GET_BIT(prob, mi) RC_GET_BIT2(prob, mi, ; , ;)               
+
+int RangeDecoderBitTreeDecode(CProb *probs, int numLevels, CRangeDecoder *rd)
+{
+  int mi = 1;
+  int i;
+  #ifdef _LZMA_LOC_OPT
+  RC_INIT_VAR
+  #endif
+  for(i = numLevels; i > 0; i--)
+  {
+    #ifdef _LZMA_LOC_OPT
+    CProb *prob = probs + mi;
+    RC_GET_BIT(prob, mi)
+    #else
+    mi = (mi + mi) + RangeDecoderBitDecode(probs + mi, rd);
+    #endif
+  }
+  #ifdef _LZMA_LOC_OPT
+  RC_FLUSH_VAR
+  #endif
+  return mi - (1 << numLevels);
+}
+
+int RangeDecoderReverseBitTreeDecode(CProb *probs, int numLevels, CRangeDecoder *rd)
+{
+  int mi = 1;
+  int i;
+  int symbol = 0;
+  #ifdef _LZMA_LOC_OPT
+  RC_INIT_VAR
+  #endif
+  for(i = 0; i < numLevels; i++)
+  {
+    #ifdef _LZMA_LOC_OPT
+    CProb *prob = probs + mi;
+    RC_GET_BIT2(prob, mi, ; , symbol |= (1 << i))
+    #else
+    int bit = RangeDecoderBitDecode(probs + mi, rd);
+    mi = mi + mi + bit;
+    symbol |= (bit << i);
+    #endif
+  }
+  #ifdef _LZMA_LOC_OPT
+  RC_FLUSH_VAR
+  #endif
+  return symbol;
+}
+
+Byte LzmaLiteralDecode(CProb *probs, CRangeDecoder *rd)
+{ 
+  int symbol = 1;
+  #ifdef _LZMA_LOC_OPT
+  RC_INIT_VAR
+  #endif
+  do
+  {
+    #ifdef _LZMA_LOC_OPT
+    CProb *prob = probs + symbol;
+    RC_GET_BIT(prob, symbol)
+    #else
+    symbol = (symbol + symbol) | RangeDecoderBitDecode(probs + symbol, rd);
+    #endif
+  }
+  while (symbol < 0x100);
+  #ifdef _LZMA_LOC_OPT
+  RC_FLUSH_VAR
+  #endif
+  return symbol;
+}
+
+Byte LzmaLiteralDecodeMatch(CProb *probs, CRangeDecoder *rd, Byte matchByte)
+{ 
+  int symbol = 1;
+  #ifdef _LZMA_LOC_OPT
+  RC_INIT_VAR
+  #endif
+  do
+  {
+    int bit;
+    int matchBit = (matchByte >> 7) & 1;
+    matchByte <<= 1;
+    #ifdef _LZMA_LOC_OPT
+    {
+      CProb *prob = probs + ((1 + matchBit) << 8) + symbol;
+      RC_GET_BIT2(prob, symbol, bit = 0, bit = 1)
+    }
+    #else
+    bit = RangeDecoderBitDecode(probs + ((1 + matchBit) << 8) + symbol, rd);
+    symbol = (symbol << 1) | bit;
+    #endif
+    if (matchBit != bit)
+    {
+      while (symbol < 0x100)
+      {
+        #ifdef _LZMA_LOC_OPT
+        CProb *prob = probs + symbol;
+        RC_GET_BIT(prob, symbol)
+        #else
+        symbol = (symbol + symbol) | RangeDecoderBitDecode(probs + symbol, rd);
+        #endif
+      }
+      break;
+    }
+  }
+  while (symbol < 0x100);
+  #ifdef _LZMA_LOC_OPT
+  RC_FLUSH_VAR
+  #endif
+  return symbol;
+}
+
+#define kNumPosBitsMax 4
+#define kNumPosStatesMax (1 << kNumPosBitsMax)
+
+#define kLenNumLowBits 3
+#define kLenNumLowSymbols (1 << kLenNumLowBits)
+#define kLenNumMidBits 3
+#define kLenNumMidSymbols (1 << kLenNumMidBits)
+#define kLenNumHighBits 8
+#define kLenNumHighSymbols (1 << kLenNumHighBits)
+
+#define LenChoice 0
+#define LenChoice2 (LenChoice + 1)
+#define LenLow (LenChoice2 + 1)
+#define LenMid (LenLow + (kNumPosStatesMax << kLenNumLowBits))
+#define LenHigh (LenMid + (kNumPosStatesMax << kLenNumMidBits))
+#define kNumLenProbs (LenHigh + kLenNumHighSymbols) 
+
+int LzmaLenDecode(CProb *p, CRangeDecoder *rd, int posState)
+{
+  if(RangeDecoderBitDecode(p + LenChoice, rd) == 0)
+    return RangeDecoderBitTreeDecode(p + LenLow +
+        (posState << kLenNumLowBits), kLenNumLowBits, rd);
+  if(RangeDecoderBitDecode(p + LenChoice2, rd) == 0)
+    return kLenNumLowSymbols + RangeDecoderBitTreeDecode(p + LenMid +
+        (posState << kLenNumMidBits), kLenNumMidBits, rd);
+  return kLenNumLowSymbols + kLenNumMidSymbols + 
+      RangeDecoderBitTreeDecode(p + LenHigh, kLenNumHighBits, rd);
+}
+
+#define kNumStates 12
+
+#define kStartPosModelIndex 4
+#define kEndPosModelIndex 14
+#define kNumFullDistances (1 << (kEndPosModelIndex >> 1))
+
+#define kNumPosSlotBits 6
+#define kNumLenToPosStates 4
+
+#define kNumAlignBits 4
+#define kAlignTableSize (1 << kNumAlignBits)
+
+#define kMatchMinLen 2
+
+#define IsMatch 0
+#define IsRep (IsMatch + (kNumStates << kNumPosBitsMax))
+#define IsRepG0 (IsRep + kNumStates)
+#define IsRepG1 (IsRepG0 + kNumStates)
+#define IsRepG2 (IsRepG1 + kNumStates)
+#define IsRep0Long (IsRepG2 + kNumStates)
+#define PosSlot (IsRep0Long + (kNumStates << kNumPosBitsMax))
+#define SpecPos (PosSlot + (kNumLenToPosStates << kNumPosSlotBits))
+#define Align (SpecPos + kNumFullDistances - kEndPosModelIndex)
+#define LenCoder (Align + kAlignTableSize)
+#define RepLenCoder (LenCoder + kNumLenProbs)
+#define Literal (RepLenCoder + kNumLenProbs)
+
+#if Literal != LZMA_BASE_SIZE
+StopCompilingDueBUG
+#endif
+
+#ifdef _LZMA_OUT_READ
+
+typedef struct _LzmaVarState
+{
+  CRangeDecoder RangeDecoder;
+  Byte *Dictionary;
+  UInt32 DictionarySize;
+  UInt32 DictionaryPos;
+  UInt32 GlobalPos;
+  UInt32 Reps[4];
+  int lc;
+  int lp;
+  int pb;
+  int State;
+  int PreviousIsMatch;
+  int RemainLen;
+} LzmaVarState;
+
+int LzmaDecoderInit(
+    unsigned char *buffer, UInt32 bufferSize,
+    int lc, int lp, int pb,
+    unsigned char *dictionary, UInt32 dictionarySize,
+    #ifdef _LZMA_IN_CB
+    ILzmaInCallback *inCallback
+    #else
+    unsigned char *inStream, UInt32 inSize
+    #endif
+    )
+{
+  LzmaVarState *vs = (LzmaVarState *)buffer;
+  CProb *p = (CProb *)(buffer + sizeof(LzmaVarState));
+  UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + lp));
+  UInt32 i;
+  if (bufferSize < numProbs * sizeof(CProb) + sizeof(LzmaVarState))
+    return LZMA_RESULT_NOT_ENOUGH_MEM;
+  vs->Dictionary = dictionary;
+  vs->DictionarySize = dictionarySize;
+  vs->DictionaryPos = 0;
+  vs->GlobalPos = 0;
+  vs->Reps[0] = vs->Reps[1] = vs->Reps[2] = vs->Reps[3] = 1;
+  vs->lc = lc;
+  vs->lp = lp;
+  vs->pb = pb;
+  vs->State = 0;
+  vs->PreviousIsMatch = 0;
+  vs->RemainLen = 0;
+  dictionary[dictionarySize - 1] = 0;
+  for (i = 0; i < numProbs; i++)
+    p[i] = kBitModelTotal >> 1; 
+  RangeDecoderInit(&vs->RangeDecoder, 
+      #ifdef _LZMA_IN_CB
+      inCallback
+      #else
+      inStream, inSize
+      #endif
+  );
+  return LZMA_RESULT_OK;
+}
+
+int LzmaDecode(unsigned char *buffer, 
+    unsigned char *outStream, UInt32 outSize,
+    UInt32 *outSizeProcessed)
+{
+  LzmaVarState *vs = (LzmaVarState *)buffer;
+  CProb *p = (CProb *)(buffer + sizeof(LzmaVarState));
+  CRangeDecoder rd = vs->RangeDecoder;
+  int state = vs->State;
+  int previousIsMatch = vs->PreviousIsMatch;
+  Byte previousByte;
+  UInt32 rep0 = vs->Reps[0], rep1 = vs->Reps[1], rep2 = vs->Reps[2], rep3 = vs->Reps[3];
+  UInt32 nowPos = 0;
+  UInt32 posStateMask = (1 << (vs->pb)) - 1;
+  UInt32 literalPosMask = (1 << (vs->lp)) - 1;
+  int lc = vs->lc;
+  int len = vs->RemainLen;
+  UInt32 globalPos = vs->GlobalPos;
+
+  Byte *dictionary = vs->Dictionary;
+  UInt32 dictionarySize = vs->DictionarySize;
+  UInt32 dictionaryPos = vs->DictionaryPos;
+
+  if (len == -1)
+  {
+    *outSizeProcessed = 0;
+    return LZMA_RESULT_OK;
+  }
+
+  while(len > 0 && nowPos < outSize)
+  {
+    UInt32 pos = dictionaryPos - rep0;
+    if (pos >= dictionarySize)
+      pos += dictionarySize;
+    outStream[nowPos++] = dictionary[dictionaryPos] = dictionary[pos];
+    if (++dictionaryPos == dictionarySize)
+      dictionaryPos = 0;
+    len--;
+  }
+  if (dictionaryPos == 0)
+    previousByte = dictionary[dictionarySize - 1];
+  else
+    previousByte = dictionary[dictionaryPos - 1];
+#else
+
+int LzmaDecode(
+    Byte *buffer, UInt32 bufferSize,
+    int lc, int lp, int pb,
+    #ifdef _LZMA_IN_CB
+    ILzmaInCallback *inCallback,
+    #else
+    unsigned char *inStream, UInt32 inSize,
+    #endif
+    unsigned char *outStream, UInt32 outSize,
+    UInt32 *outSizeProcessed)
+{
+  UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + lp));
+  CProb *p = (CProb *)buffer;
+  CRangeDecoder rd;
+  UInt32 i;
+  int state = 0;
+  int previousIsMatch = 0;
+  Byte previousByte = 0;
+  UInt32 rep0 = 1, rep1 = 1, rep2 = 1, rep3 = 1;
+  UInt32 nowPos = 0;
+  UInt32 posStateMask = (1 << pb) - 1;
+  UInt32 literalPosMask = (1 << lp) - 1;
+  int len = 0;
+  if (bufferSize < numProbs * sizeof(CProb))
+    return LZMA_RESULT_NOT_ENOUGH_MEM;
+  for (i = 0; i < numProbs; i++)
+    p[i] = kBitModelTotal >> 1; 
+  RangeDecoderInit(&rd, 
+      #ifdef _LZMA_IN_CB
+      inCallback
+      #else
+      inStream, inSize
+      #endif
+      );
+#endif
+
+  *outSizeProcessed = 0;
+  while(nowPos < outSize)
+  {
+    int posState = (int)(
+        (nowPos 
+        #ifdef _LZMA_OUT_READ
+        + globalPos
+        #endif
+        )
+        & posStateMask);
+    #ifdef _LZMA_IN_CB
+    if (rd.Result != LZMA_RESULT_OK)
+      return rd.Result;
+    #endif
+    if (rd.ExtraBytes != 0)
+      return LZMA_RESULT_DATA_ERROR;
+    if (RangeDecoderBitDecode(p + IsMatch + (state << kNumPosBitsMax) + posState, &rd) == 0)
+    {
+      CProb *probs = p + Literal + (LZMA_LIT_SIZE * 
+        (((
+        (nowPos 
+        #ifdef _LZMA_OUT_READ
+        + globalPos
+        #endif
+        )
+        & literalPosMask) << lc) + (previousByte >> (8 - lc))));
+
+      if (state < 4) state = 0;
+      else if (state < 10) state -= 3;
+      else state -= 6;
+      if (previousIsMatch)
+      {
+        Byte matchByte;
+        #ifdef _LZMA_OUT_READ
+        UInt32 pos = dictionaryPos - rep0;
+        if (pos >= dictionarySize)
+          pos += dictionarySize;
+        matchByte = dictionary[pos];
+        #else
+        matchByte = outStream[nowPos - rep0];
+        #endif
+        previousByte = LzmaLiteralDecodeMatch(probs, &rd, matchByte);
+        previousIsMatch = 0;
+      }
+      else
+        previousByte = LzmaLiteralDecode(probs, &rd);
+      outStream[nowPos++] = previousByte;
+      #ifdef _LZMA_OUT_READ
+      dictionary[dictionaryPos] = previousByte;
+      if (++dictionaryPos == dictionarySize)
+        dictionaryPos = 0;
+      #endif
+    }
+    else             
+    {
+      previousIsMatch = 1;
+      if (RangeDecoderBitDecode(p + IsRep + state, &rd) == 1)
+      {
+        if (RangeDecoderBitDecode(p + IsRepG0 + state, &rd) == 0)
+        {
+          if (RangeDecoderBitDecode(p + IsRep0Long + (state << kNumPosBitsMax) + posState, &rd) == 0)
+          {
+            #ifdef _LZMA_OUT_READ
+            UInt32 pos;
+            #endif
+            if (
+               (nowPos 
+                #ifdef _LZMA_OUT_READ
+                + globalPos
+                #endif
+               )
+               == 0)
+              return LZMA_RESULT_DATA_ERROR;
+            state = state < 7 ? 9 : 11;
+            #ifdef _LZMA_OUT_READ
+            pos = dictionaryPos - rep0;
+            if (pos >= dictionarySize)
+              pos += dictionarySize;
+            previousByte = dictionary[pos];
+            dictionary[dictionaryPos] = previousByte;
+            if (++dictionaryPos == dictionarySize)
+              dictionaryPos = 0;
+            #else
+            previousByte = outStream[nowPos - rep0];
+            #endif
+            outStream[nowPos++] = previousByte;
+            continue;
+          }
+        }
+        else
+        {
+          UInt32 distance;
+          if(RangeDecoderBitDecode(p + IsRepG1 + state, &rd) == 0)
+            distance = rep1;
+          else 
+          {
+            if(RangeDecoderBitDecode(p + IsRepG2 + state, &rd) == 0)
+              distance = rep2;
+            else
+            {
+              distance = rep3;
+              rep3 = rep2;
+            }
+            rep2 = rep1;
+          }
+          rep1 = rep0;
+          rep0 = distance;
+        }
+        len = LzmaLenDecode(p + RepLenCoder, &rd, posState);
+        state = state < 7 ? 8 : 11;
+      }
+      else
+      {
+        int posSlot;
+        rep3 = rep2;
+        rep2 = rep1;
+        rep1 = rep0;
+        state = state < 7 ? 7 : 10;
+        len = LzmaLenDecode(p + LenCoder, &rd, posState);
+        posSlot = RangeDecoderBitTreeDecode(p + PosSlot +
+            ((len < kNumLenToPosStates ? len : kNumLenToPosStates - 1) << 
+            kNumPosSlotBits), kNumPosSlotBits, &rd);
+        if (posSlot >= kStartPosModelIndex)
+        {
+          int numDirectBits = ((posSlot >> 1) - 1);
+          rep0 = ((2 | ((UInt32)posSlot & 1)) << numDirectBits);
+          if (posSlot < kEndPosModelIndex)
+          {
+            rep0 += RangeDecoderReverseBitTreeDecode(
+                p + SpecPos + rep0 - posSlot - 1, numDirectBits, &rd);
+          }
+          else
+          {
+            rep0 += RangeDecoderDecodeDirectBits(&rd, 
+                numDirectBits - kNumAlignBits) << kNumAlignBits;
+            rep0 += RangeDecoderReverseBitTreeDecode(p + Align, kNumAlignBits, &rd);
+          }
+        }
+        else
+          rep0 = posSlot;
+        rep0++;
+      }
+      if (rep0 == (UInt32)(0))
+      {
+        /* it's for stream version */
+        len = -1;
+        break;
+      }
+      if (rep0 > nowPos 
+        #ifdef _LZMA_OUT_READ
+        + globalPos
+        #endif
+        )
+      {
+        return LZMA_RESULT_DATA_ERROR;
+      }
+      len += kMatchMinLen;
+      do
+      {
+        #ifdef _LZMA_OUT_READ
+        UInt32 pos = dictionaryPos - rep0;
+        if (pos >= dictionarySize)
+          pos += dictionarySize;
+        previousByte = dictionary[pos];
+        dictionary[dictionaryPos] = previousByte;
+        if (++dictionaryPos == dictionarySize)
+          dictionaryPos = 0;
+        #else
+        previousByte = outStream[nowPos - rep0];
+        #endif
+        outStream[nowPos++] = previousByte;
+        len--;
+      }
+      while(len > 0 && nowPos < outSize);
+    }
+  }
+
+  #ifdef _LZMA_OUT_READ
+  vs->RangeDecoder = rd;
+  vs->DictionaryPos = dictionaryPos;
+  vs->GlobalPos = globalPos + nowPos;
+  vs->Reps[0] = rep0;
+  vs->Reps[1] = rep1;
+  vs->Reps[2] = rep2;
+  vs->Reps[3] = rep3;
+  vs->State = state;
+  vs->PreviousIsMatch = previousIsMatch;
+  vs->RemainLen = len;
+  #endif
+
+  *outSizeProcessed = nowPos;
+  return LZMA_RESULT_OK;
+}
diff --git a/target/linux/brcm63xx-2.6/image/lzma-loader/src/LzmaDecode.h b/target/linux/brcm63xx-2.6/image/lzma-loader/src/LzmaDecode.h
new file mode 100644
index 000000000..f58944e3c
--- /dev/null
+++ b/target/linux/brcm63xx-2.6/image/lzma-loader/src/LzmaDecode.h
@@ -0,0 +1,100 @@
+/* 
+  LzmaDecode.h
+  LZMA Decoder interface
+
+  LZMA SDK 4.05 Copyright (c) 1999-2004 Igor Pavlov (2004-08-25)
+  http://www.7-zip.org/
+
+  LZMA SDK is licensed under two licenses:
+  1) GNU Lesser General Public License (GNU LGPL)
+  2) Common Public License (CPL)
+  It means that you can select one of these two licenses and 
+  follow rules of that license.
+
+  SPECIAL EXCEPTION:
+  Igor Pavlov, as the author of this code, expressly permits you to 
+  statically or dynamically link your code (or bind by name) to the 
+  interfaces of this file without subjecting your linked code to the 
+  terms of the CPL or GNU LGPL. Any modifications or additions 
+  to this file, however, are subject to the LGPL or CPL terms.
+*/
+
+#ifndef __LZMADECODE_H
+#define __LZMADECODE_H
+
+/* #define _LZMA_IN_CB */
+/* Use callback for input data */
+
+/* #define _LZMA_OUT_READ */
+/* Use read function for output data */
+
+/* #define _LZMA_PROB32 */
+/* It can increase speed on some 32-bit CPUs, 
+   but memory usage will be doubled in that case */
+
+/* #define _LZMA_LOC_OPT */
+/* Enable local speed optimizations inside code */
+
+#ifndef UInt32
+#ifdef _LZMA_UINT32_IS_ULONG
+#define UInt32 unsigned long
+#else
+#define UInt32 unsigned int
+#endif
+#endif
+
+#ifdef _LZMA_PROB32
+#define CProb UInt32
+#else
+#define CProb unsigned short
+#endif
+
+#define LZMA_RESULT_OK 0
+#define LZMA_RESULT_DATA_ERROR 1
+#define LZMA_RESULT_NOT_ENOUGH_MEM 2
+
+#ifdef _LZMA_IN_CB
+typedef struct _ILzmaInCallback
+{
+  int (*Read)(void *object, unsigned char **buffer, UInt32 *bufferSize);
+} ILzmaInCallback;
+#endif
+
+#define LZMA_BASE_SIZE 1846
+#define LZMA_LIT_SIZE 768
+
+/* 
+bufferSize = (LZMA_BASE_SIZE + (LZMA_LIT_SIZE << (lc + lp)))* sizeof(CProb)
+bufferSize += 100 in case of _LZMA_OUT_READ
+by default CProb is unsigned short, 
+but if specify _LZMA_PROB_32, CProb will be UInt32(unsigned int)
+*/
+
+#ifdef _LZMA_OUT_READ
+int LzmaDecoderInit(
+    unsigned char *buffer, UInt32 bufferSize,
+    int lc, int lp, int pb,
+    unsigned char *dictionary, UInt32 dictionarySize,
+  #ifdef _LZMA_IN_CB
+    ILzmaInCallback *inCallback
+  #else
+    unsigned char *inStream, UInt32 inSize
+  #endif
+);
+#endif
+
+int LzmaDecode(
+    unsigned char *buffer, 
+  #ifndef _LZMA_OUT_READ
+    UInt32 bufferSize,
+    int lc, int lp, int pb,
+  #ifdef _LZMA_IN_CB
+    ILzmaInCallback *inCallback,
+  #else
+    unsigned char *inStream, UInt32 inSize,
+  #endif
+  #endif
+    unsigned char *outStream, UInt32 outSize,
+    UInt32 *outSizeProcessed);
+
+#endif
diff --git a/target/linux/brcm63xx-2.6/image/lzma-loader/src/Makefile b/target/linux/brcm63xx-2.6/image/lzma-loader/src/Makefile
new file mode 100644
index 000000000..85a864674
--- /dev/null
+++ b/target/linux/brcm63xx-2.6/image/lzma-loader/src/Makefile
@@ -0,0 +1,77 @@
+#
+# Makefile for Broadcom BCM947XX boards
+#
+# Copyright 2001-2003, Broadcom Corporation
+# All Rights Reserved.
+# 
+# THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+# KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+# SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+# FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+#
+# Copyright 2004  Manuel Novoa III <mjn3@codepoet.org>
+#   Modified to support bzip'd kernels.
+#   Of course, it would be better to integrate bunzip capability into CFE.
+#
+# Copyright 2005  Oleg I. Vdovikin <oleg@cs.msu.su>
+#   Cleaned up, modified for lzma support, removed from kernel
+#
+
+TEXT_START	:= 0x80001000
+BZ_TEXT_START	:= 0x80300000
+
+OBJCOPY		:= $(CROSS_COMPILE)objcopy -O binary -R .reginfo -R .note -R .comment -R .mdebug -S
+
+CFLAGS		= -D__KERNEL__ -Wall -Wstrict-prototypes -Wno-trigraphs -Os \
+		  -fno-strict-aliasing -fno-common -fomit-frame-pointer -G 0 -mno-abicalls -fno-pic \
+		  -ffunction-sections -pipe -mlong-calls -fno-common \
+		  -mabi=32 -march=mips32 -Wa,-32 -Wa,-march=mips32 -Wa,-mips32 -Wa,--trap
+CFLAGS		+= -DLOADADDR=$(TEXT_START) -D_LZMA_IN_CB
+
+ASFLAGS		= $(CFLAGS) -D__ASSEMBLY__ -DBZ_TEXT_START=$(BZ_TEXT_START)
+
+SEDFLAGS	:= s/BZ_TEXT_START/$(BZ_TEXT_START)/;s/TEXT_START/$(TEXT_START)/
+
+OBJECTS		:= head.o data.o
+
+all: loader.gz loader.elf
+
+# Don't build dependencies, this may die if $(CC) isn't gcc
+dep:
+
+install:
+
+loader.gz: loader
+	gzip -nc9 $< > $@
+
+loader.elf: loader.o
+	cp $< $@
+
+loader: loader.o
+	$(OBJCOPY) $< $@
+
+loader.o: loader.lds $(OBJECTS)
+	$(LD) -static --gc-sections -no-warn-mismatch -T loader.lds -o $@ $(OBJECTS)
+
+loader.lds: loader.lds.in Makefile
+	@sed "$(SEDFLAGS)" < $< > $@
+
+data.o: data.lds decompress.image
+	$(LD) -no-warn-mismatch -T data.lds -r -o $@ -b binary decompress.image -b elf32-tradlittlemips
+
+data.lds:
+	@echo "SECTIONS { .data : { code_start = .; *(.data) code_stop = .; }}" > $@
+
+decompress.image: decompress
+	$(OBJCOPY) $< $@
+
+decompress: decompress.lds decompress.o LzmaDecode.o
+	$(LD) -static --gc-sections -no-warn-mismatch -T decompress.lds -o $@ decompress.o LzmaDecode.o
+
+decompress.lds: decompress.lds.in Makefile
+	@sed "$(SEDFLAGS)" < $< > $@
+
+mrproper: clean
+
+clean:
+	rm -f loader.gz loader decompress *.lds *.o *.image
diff --git a/target/linux/brcm63xx-2.6/image/lzma-loader/src/README b/target/linux/brcm63xx-2.6/image/lzma-loader/src/README
new file mode 100644
index 000000000..16649e950
--- /dev/null
+++ b/target/linux/brcm63xx-2.6/image/lzma-loader/src/README
@@ -0,0 +1,55 @@
+/*
+ * LZMA compressed kernel decompressor for bcm947xx boards
+ *
+ * Copyright (C) 2005 by Oleg I. Vdovikin <oleg@cs.msu.su>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+The code is intended to decompress kernel, being compressed using lzma utility
+build using 7zip LZMA SDK. This utility is located in the LZMA_Alone directory
+
+decompressor code expects that your .trx file consist of three partitions: 
+
+1) decompressor itself (this is gziped code which pmon/cfe will extract and run
+on boot-up instead of real kernel)
+2) LZMA compressed kernel (both streamed and regular modes are supported now)
+3) Root filesystem
+
+Please be sure to apply the following patch for use this new trx layout (it will
+allow using both new and old trx files for root filesystem lookup code)
+
+--- linuz/arch/mips/brcm-boards/bcm947xx/setup.c        2005-01-23 19:24:27.503322896 +0300
++++ linux/arch/mips/brcm-boards/bcm947xx/setup.c        2005-01-23 19:29:05.237100944 +0300
+@@ -221,7 +221,9 @@
+                /* Try looking at TRX header for rootfs offset */
+                if (le32_to_cpu(trx->magic) == TRX_MAGIC) {
+                        bcm947xx_parts[1].offset = off;
+-                       if (le32_to_cpu(trx->offsets[1]) > off)
++                       if (le32_to_cpu(trx->offsets[2]) > off)
++                               off = le32_to_cpu(trx->offsets[2]);
++                       else if (le32_to_cpu(trx->offsets[1]) > off)
+                                off = le32_to_cpu(trx->offsets[1]);
+                        continue;
+                }
+
+
+Revision history:
+	0.02	Initial release
+	0.03	Added Mineharu Takahara <mtakahar@yahoo.com> patch to pass actual
+		output size to decoder (stream mode compressed input is not 
+		a requirement anymore)
+	0.04	Reordered functions using lds script
diff --git a/target/linux/brcm63xx-2.6/image/lzma-loader/src/decompress.c b/target/linux/brcm63xx-2.6/image/lzma-loader/src/decompress.c
new file mode 100644
index 000000000..ec510e21e
--- /dev/null
+++ b/target/linux/brcm63xx-2.6/image/lzma-loader/src/decompress.c
@@ -0,0 +1,175 @@
+/*
+ * LZMA compressed kernel decompressor for bcm947xx boards
+ *
+ * Copyright (C) 2005 by Oleg I. Vdovikin <oleg@cs.msu.su>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ *
+ * Please note, this was code based on the bunzip2 decompressor code
+ * by Manuel Novoa III  (mjn3@codepoet.org), although the only thing left
+ * is an idea and part of original vendor code
+ *
+ *
+ * 12-Mar-2005  Mineharu Takahara <mtakahar@yahoo.com>
+ *   pass actual output size to decoder (stream mode
+ *   compressed input is not a requirement anymore)
+ *
+ * 24-Apr-2005 Oleg I. Vdovikin
+ *   reordered functions using lds script, removed forward decl
+ *
+ */
+
+#include "LzmaDecode.h"
+
+#define BCM4710_FLASH		0x1fc00000	/* Flash */
+
+#define KSEG0			0x80000000
+#define KSEG1			0xa0000000
+
+#define KSEG1ADDR(a)		((((unsigned)(a)) & 0x1fffffffU) | KSEG1)
+
+#define Index_Invalidate_I	0x00
+#define Index_Writeback_Inv_D   0x01
+
+#define cache_unroll(base,op)	\
+	__asm__ __volatile__(		\
+		".set noreorder;\n"		\
+		".set mips3;\n"			\
+		"cache %1, (%0);\n"		\
+		".set mips0;\n"			\
+		".set reorder\n"		\
+		:						\
+		: "r" (base),			\
+		  "i" (op));
+
+static __inline__ void blast_icache(unsigned long size, unsigned long lsize)
+{
+	unsigned long start = KSEG0;
+	unsigned long end = (start + size);
+
+	while(start < end) {
+		cache_unroll(start,Index_Invalidate_I);
+		start += lsize;
+	}
+}
+
+static __inline__ void blast_dcache(unsigned long size, unsigned long lsize)
+{
+	unsigned long start = KSEG0;
+	unsigned long end = (start + size);
+
+	while(start < end) {
+		cache_unroll(start,Index_Writeback_Inv_D);
+		start += lsize;
+	}
+}
+
+#define TRX_MAGIC       0x30524448      /* "HDR0" */
+
+struct trx_header {
+	unsigned int magic;		/* "HDR0" */
+	unsigned int len;		/* Length of file including header */
+	unsigned int crc32;		/* 32-bit CRC from flag_version to end of file */
+	unsigned int flag_version;	/* 0:15 flags, 16:31 version */
+	unsigned int offsets[3];	/* Offsets of partitions from start of header */
+};
+
+/* beyound the image end, size not known in advance */
+extern unsigned char workspace[];
+
+unsigned int offset;
+unsigned char *data;
+
+/* flash access should be aligned, so wrapper is used */
+/* read byte from the flash, all accesses are 32-bit aligned */
+static int read_byte(void *object, unsigned char **buffer, UInt32 *bufferSize)
+{
+	static unsigned int val;
+
+	if (((unsigned int)offset % 4) == 0) {
+		val = *(unsigned int *)data;
+		data += 4;
+	}
+	
+	*bufferSize = 1;
+	*buffer = ((unsigned char *)&val) + (offset++ & 3);
+	
+	return LZMA_RESULT_OK;
+}
+
+static __inline__ unsigned char get_byte(void)
+{
+	unsigned char *buffer;
+	UInt32 fake;
+	
+	return read_byte(0, &buffer, &fake), *buffer;
+}
+
+/* should be the first function */
+void entry(unsigned long icache_size, unsigned long icache_lsize, 
+	unsigned long dcache_size, unsigned long dcache_lsize)
+{
+	unsigned int i;  /* temp value */
+	unsigned int lc; /* literal context bits */
+	unsigned int lp; /* literal pos state bits */
+	unsigned int pb; /* pos state bits */
+	unsigned int osize; /* uncompressed size */
+
+	ILzmaInCallback callback;
+	callback.Read = read_byte;
+
+	/* look for trx header, 32-bit data access */
+	for (data = ((unsigned char *) KSEG1ADDR(BCM4710_FLASH));
+		((struct trx_header *)data)->magic != TRX_MAGIC; data += 65536);
+
+	/* compressed kernel is in the partition 0 or 1 */
+	if (((struct trx_header *)data)->offsets[1] > 65536) 
+		data += ((struct trx_header *)data)->offsets[0];
+	else
+		data += ((struct trx_header *)data)->offsets[1];
+
+	offset = 0;
+
+	/* lzma args */
+	i = get_byte();
+	lc = i % 9, i = i / 9;
+	lp = i % 5, pb = i / 5;
+
+	/* skip rest of the LZMA coder property */
+	for (i = 0; i < 4; i++)
+		get_byte();
+
+	/* read the lower half of uncompressed size in the header */
+	osize = ((unsigned int)get_byte()) +
+		((unsigned int)get_byte() << 8) +
+		((unsigned int)get_byte() << 16) +
+		((unsigned int)get_byte() << 24);
+
+	/* skip rest of the header (upper half of uncompressed size) */
+	for (i = 0; i < 4; i++) 
+		get_byte();
+
+	/* decompress kernel */
+	if (LzmaDecode(workspace, ~0, lc, lp, pb, &callback,
+		(unsigned char*)LOADADDR, osize, &i) == LZMA_RESULT_OK)
+	{
+		blast_dcache(dcache_size, dcache_lsize);
+		blast_icache(icache_size, icache_lsize);
+
+		/* Jump to load address */
+		((void (*)(void)) LOADADDR)();
+	}
+}
diff --git a/target/linux/brcm63xx-2.6/image/lzma-loader/src/decompress.lds.in b/target/linux/brcm63xx-2.6/image/lzma-loader/src/decompress.lds.in
new file mode 100644
index 000000000..33f56f8a0
--- /dev/null
+++ b/target/linux/brcm63xx-2.6/image/lzma-loader/src/decompress.lds.in
@@ -0,0 +1,20 @@
+OUTPUT_ARCH(mips)
+ENTRY(entry)
+SECTIONS {
+	. = BZ_TEXT_START;
+	.text : {
+		*(.text.entry)
+		*(.text)
+		*(.rodata)
+	}
+
+	.data : {
+		*(.data)
+	}
+
+	.bss : {
+		*(.bss)
+	}
+
+	workspace = .;
+}
diff --git a/target/linux/brcm63xx-2.6/image/lzma-loader/src/head.S b/target/linux/brcm63xx-2.6/image/lzma-loader/src/head.S
new file mode 100644
index 000000000..9bfbd53d5
--- /dev/null
+++ b/target/linux/brcm63xx-2.6/image/lzma-loader/src/head.S
@@ -0,0 +1,155 @@
+/* Copyright 2005 Oleg I. Vdovikin (oleg@cs.msu.su)	*/
+/* cache manipulation adapted from Broadcom code 	*/
+/* idea taken from original bunzip2 decompressor code	*/
+/* Copyright 2004 Manuel Novoa III (mjn3@codepoet.org)	*/
+/* Licensed under the linux kernel's version of the GPL.*/
+
+#include <asm/asm.h>
+#include <asm/regdef.h>
+
+#define KSEG0		0x80000000
+
+#define C0_CONFIG	$16
+#define C0_TAGLO	$28
+#define C0_TAGHI	$29
+
+#define	CONF1_DA_SHIFT	7			/* D$ associativity */
+#define CONF1_DA_MASK	0x00000380
+#define CONF1_DA_BASE	1
+#define CONF1_DL_SHIFT	10			/* D$ line size */
+#define CONF1_DL_MASK	0x00001c00
+#define CONF1_DL_BASE	2
+#define CONF1_DS_SHIFT	13			/* D$ sets/way */
+#define CONF1_DS_MASK	0x0000e000
+#define CONF1_DS_BASE	64
+#define CONF1_IA_SHIFT	16			/* I$ associativity */
+#define CONF1_IA_MASK	0x00070000
+#define CONF1_IA_BASE	1
+#define CONF1_IL_SHIFT	19			/* I$ line size */
+#define CONF1_IL_MASK	0x00380000
+#define CONF1_IL_BASE	2
+#define CONF1_IS_SHIFT	22			/* Instruction cache sets/way */
+#define CONF1_IS_MASK	0x01c00000
+#define CONF1_IS_BASE	64
+
+#define Index_Invalidate_I	0x00
+#define Index_Writeback_Inv_D   0x01
+
+	.text
+	LEAF(startup)
+	.set noreorder
+	
+	/* Copy decompressor code to the right place */
+	li	t2, BZ_TEXT_START
+	add	a0, t2, 0
+	la      a1, code_start
+	la	a2, code_stop
+$L1:
+	lw	t0, 0(a1)
+	sw	t0, 0(a0)
+	add	a1, 4
+	add	a0, 4
+	blt	a1, a2, $L1
+	nop
+	
+	/* At this point we need to invalidate dcache and */
+	/* icache before jumping to new code */
+
+1:	/* Get cache sizes */
+	.set	mips32
+	mfc0	s0,C0_CONFIG,1
+	.set	mips0
+
+	li	s1,CONF1_DL_MASK
+	and	s1,s0
+	beq	s1,zero,nodc
+	nop
+
+	srl	s1,CONF1_DL_SHIFT
+	li	t0,CONF1_DL_BASE
+	sll	s1,t0,s1		/* s1 has D$ cache line size */
+
+	li	s2,CONF1_DA_MASK
+	and	s2,s0
+	srl	s2,CONF1_DA_SHIFT
+	addiu	s2,CONF1_DA_BASE	/* s2 now has D$ associativity */
+
+	li	t0,CONF1_DS_MASK
+	and	t0,s0
+	srl	t0,CONF1_DS_SHIFT
+	li	s3,CONF1_DS_BASE
+	sll	s3,s3,t0		/* s3 has D$ sets per way */
+
+	multu	s2,s3			/* sets/way * associativity */
+	mflo	t0			/* total cache lines */
+
+	multu	s1,t0			/* D$ linesize * lines */
+	mflo	s2			/* s2 is now D$ size in bytes */
+
+	/* Initilize the D$: */
+	mtc0	zero,C0_TAGLO
+	mtc0	zero,C0_TAGHI
+
+	li	t0,KSEG0		/* Just an address for the first $ line */
+	addu	t1,t0,s2		/*  + size of cache == end */
+
+	.set	mips3
+1:	cache	Index_Writeback_Inv_D,0(t0)
+	.set	mips0
+	bne	t0,t1,1b
+	addu	t0,s1
+	
+nodc:
+	/* Now we get to do it all again for the I$ */
+	
+	move	s3,zero			/* just in case there is no icache */
+	move	s4,zero
+
+	li	t0,CONF1_IL_MASK
+	and	t0,s0
+	beq	t0,zero,noic
+	nop
+
+	srl	t0,CONF1_IL_SHIFT
+	li	s3,CONF1_IL_BASE
+	sll	s3,t0			/* s3 has I$ cache line size */
+
+	li	t0,CONF1_IA_MASK
+	and	t0,s0
+	srl	t0,CONF1_IA_SHIFT
+	addiu	s4,t0,CONF1_IA_BASE	/* s4 now has I$ associativity */
+
+	li	t0,CONF1_IS_MASK
+	and	t0,s0
+	srl	t0,CONF1_IS_SHIFT
+	li	s5,CONF1_IS_BASE
+	sll	s5,t0			/* s5 has I$ sets per way */
+
+	multu	s4,s5			/* sets/way * associativity */
+	mflo	t0			/* s4 is now total cache lines */
+
+	multu	s3,t0			/* I$ linesize * lines */
+	mflo	s4			/* s4 is cache size in bytes */
+
+	/* Initilize the I$: */
+	mtc0	zero,C0_TAGLO
+	mtc0	zero,C0_TAGHI
+
+	li	t0,KSEG0		/* Just an address for the first $ line */
+	addu	t1,t0,s4		/*  + size of cache == end */
+
+	.set	mips3
+1:	cache	Index_Invalidate_I,0(t0)
+	.set	mips0
+	bne	t0,t1,1b
+	addu	t0,s3
+
+noic:
+	move	a0,s3			/* icache line size */
+	move	a1,s4			/* icache size */
+	move	a2,s1			/* dcache line size */
+	jal	t2
+	move	a3,s2			/* dcache size */
+	
+	.set reorder
+	END(startup)
diff --git a/target/linux/brcm63xx-2.6/image/lzma-loader/src/loader.lds.in b/target/linux/brcm63xx-2.6/image/lzma-loader/src/loader.lds.in
new file mode 100644
index 000000000..20f2ea98e
--- /dev/null
+++ b/target/linux/brcm63xx-2.6/image/lzma-loader/src/loader.lds.in
@@ -0,0 +1,17 @@
+OUTPUT_ARCH(mips)
+ENTRY(startup)
+SECTIONS {
+	. = TEXT_START;
+	.text : {
+		*(.text)
+		*(.rodata)
+	}
+
+	.data : {
+		*(.data)
+	}
+
+	.bss : {
+		*(.bss)
+	}
+}
diff --git a/target/linux/brcm63xx-2.6/patches/001-bcm963xx.patch b/target/linux/brcm63xx-2.6/patches/001-bcm963xx.patch
index 7267c942a..42fc728ab 100644
--- a/target/linux/brcm63xx-2.6/patches/001-bcm963xx.patch
+++ b/target/linux/brcm63xx-2.6/patches/001-bcm963xx.patch
@@ -1,46 +1,56 @@
 diff -urN linux-2.6.19/arch/mips/Kconfig linux-2.6.19.new/arch/mips/Kconfig
 --- linux-2.6.19/arch/mips/Kconfig	2006-11-29 22:57:37.000000000 +0100
 +++ linux-2.6.19.new/arch/mips/Kconfig	2006-12-16 18:46:31.000000000 +0100
-@@ -12,6 +12,15 @@
+@@ -4,6 +4,10 @@
+        # Horrible source of confusion.  Die, die, die ...
+        select EMBEDDED
+
++config CFE
++       bool
++       # Common Firmware Environment
++
+ mainmenu "Linux/MIPS Kernel Configuration"
+
+ menu "Machine selection"
+@@ -12,6 +12,18 @@
  	prompt "System type"
  	default SGI_IP22
  
 +config BCM963XX 
-+	bool "Support for the Broadcom boards"
++	bool "Support for Broadcom BCM963xx SoC"
 +	select SYS_SUPPORTS_32BIT_KERNEL
 +	select SYS_SUPPORTS_BIG_ENDIAN
 +	select SYS_HAS_CPU_MIPS32_R1
++	select HW_HAS_PCI
++	select DMA_NONCOHERENT
 +	select IRQ_CPU
++	select CFE
 +	help
 +	 This is a fmaily of boards based on the Broadcom MIPS32
 +
  config MIPS_MTX1
  	bool "4G Systems MTX-1 board"
  	select DMA_NONCOHERENT
-@@ -766,6 +775,7 @@
- 
- endchoice
- 
-+source "arch/mips/bcm963xx/Kconfig"
- source "arch/mips/ddb5xxx/Kconfig"
- source "arch/mips/gt64120/ev64120/Kconfig"
- source "arch/mips/jazz/Kconfig"
 diff -urN linux-2.6.19/arch/mips/Makefile linux-2.6.19.new/arch/mips/Makefile
 --- linux-2.6.19/arch/mips/Makefile	2006-12-16 17:36:29.000000000 +0100
 +++ linux-2.6.19.new/arch/mips/Makefile	2006-12-16 18:46:31.000000000 +0100
-@@ -158,6 +158,15 @@
+@@ -158,6 +158,19 @@
  #
  
  #
-+# Broadcom board
++# Broadcom BCM963xx SoC
 +#
 +core-$(CONFIG_BCM963XX)	+= arch/mips/bcm963xx/
 +cflags-$(CONFIG_BCM963XX)     	+= -Iinclude/asm-mips/mach-bcm963xx
-+cflags-$(CONFIG_BCM963XX)     	+= -Iarch/mips/bcm963xx/include
 +load-$(CONFIG_BCM963XX)	+= 0xffffffff80010000
 +
 +
 +#
++# Common Firmware Environment
++#
++core-$(CONFIG_CFE)             += arch/mips/cfe/
++
++#
  # Acer PICA 61, Mips Magnum 4000 and Olivetti M700.
  #
  core-$(CONFIG_MACH_JAZZ)	+= arch/mips/jazz/
@@ -105,7 +115,7 @@ diff -urN linux-2.6.19/arch/mips/mm/c-r4k.c linux-2.6.19.new/arch/mips/mm/c-r4k.
  
 +		if (c->cputype == CPU_BCM6338 || c->cputype == CPU_BCM6345 || c->cputype == CPU_BCM6348)
 +		{
-+			printk("brcm mips: enabling icache and dcache...\n");
++			printk("bcm963xx: enabling icache and dcache...\n");
 +			/* Enable caches */
 +			write_c0_diag(read_c0_diag() | 0xC0000000);
 +		}
@@ -133,7 +143,7 @@ diff -urN linux-2.6.19/arch/mips/pci/Makefile linux-2.6.19.new/arch/mips/pci/Mak
  obj-$(CONFIG_PCI_VR41XX)	+= ops-vr41xx.o pci-vr41xx.o
  obj-$(CONFIG_NEC_CMBVR4133)	+= fixup-vr4133.o
  obj-$(CONFIG_MARKEINS)		+= ops-emma2rh.o pci-emma2rh.o fixup-emma2rh.o
-+obj-$(CONFIG_BCM_PCI)		+= fixup-bcm96348.o pci-bcm96348.o ops-bcm96348.o
++obj-$(CONFIG_BCM963XX)		+= fixup-bcm96348.o pci-bcm96348.o ops-bcm96348.o
  
  #
  # These are still pretty much in the old state, watch, go blind.
@@ -144,7 +154,7 @@ diff -urN linux-2.6.19/drivers/serial/Makefile linux-2.6.19.new/drivers/serial/M
  obj-$(CONFIG_SERIAL_SGI_IOC3) += ioc3_serial.o
  obj-$(CONFIG_SERIAL_ATMEL) += atmel_serial.o
  obj-$(CONFIG_SERIAL_NETX) += netx-serial.o
-+obj-$(CONFIG_BCM_SERIAL) += bcm63xx_cons.o
++obj-$(CONFIG_BCM963XX) += bcm63xx_cons.o
 diff -urN linux-2.6.19/include/asm-mips/bootinfo.h linux-2.6.19.new/include/asm-mips/bootinfo.h
 --- linux-2.6.19/include/asm-mips/bootinfo.h	2006-11-29 22:57:37.000000000 +0100
 +++ linux-2.6.19.new/include/asm-mips/bootinfo.h	2006-12-16 18:46:31.000000000 +0100