iw: update to 3.10, sync with nl80211.h changes in compat-wireless

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36569 3c298f89-4303-0410-b956-a3cf2f4a3e73

6 files changed, 72 insertions, 512 deletions

diff --git a/package/network/utils/iw/Makefile b/package/network/utils/iw/Makefile
index 91167d8b3..1ee886164 100644
--- a/package/network/utils/iw/Makefile
+++ b/package/network/utils/iw/Makefile
@@ -8,12 +8,12 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=iw
-PKG_VERSION:=3.6
+PKG_VERSION:=3.10
 PKG_RELEASE:=1
 
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.bz2
-PKG_SOURCE_URL:=http://wireless.kernel.org/download/iw/
-PKG_MD5SUM:=1c18bfbbc8773629e5e8ac733a39540c
+PKG_SOURCE_URL:=https://www.kernel.org/pub/software/network/iw
+PKG_MD5SUM:=0dc736963455937278b10fe8a2157e47
 
 PKG_MAINTAINER:=Felix Fietkau <nbd@openwrt.org>
 
diff --git a/package/network/utils/iw/patches/001-nl80211_h_sync.patch b/package/network/utils/iw/patches/001-nl80211_h_sync.patch
index fc28a652d..e20484ac2 100644
--- a/package/network/utils/iw/patches/001-nl80211_h_sync.patch
+++ b/package/network/utils/iw/patches/001-nl80211_h_sync.patch
@@ -1,416 +1,32 @@
 --- a/nl80211.h
 +++ b/nl80211.h
-@@ -118,8 +118,9 @@
-  *	to get a list of all present wiphys.
-  * @NL80211_CMD_SET_WIPHY: set wiphy parameters, needs %NL80211_ATTR_WIPHY or
-  *	%NL80211_ATTR_IFINDEX; can be used to set %NL80211_ATTR_WIPHY_NAME,
-- *	%NL80211_ATTR_WIPHY_TXQ_PARAMS, %NL80211_ATTR_WIPHY_FREQ,
-- *	%NL80211_ATTR_WIPHY_CHANNEL_TYPE, %NL80211_ATTR_WIPHY_RETRY_SHORT,
-+ *	%NL80211_ATTR_WIPHY_TXQ_PARAMS, %NL80211_ATTR_WIPHY_FREQ (and the
-+ *	attributes determining the channel width; this is used for setting
-+ *	monitor mode channel),  %NL80211_ATTR_WIPHY_RETRY_SHORT,
-  *	%NL80211_ATTR_WIPHY_RETRY_LONG, %NL80211_ATTR_WIPHY_FRAG_THRESHOLD,
-  *	and/or %NL80211_ATTR_WIPHY_RTS_THRESHOLD.
-  *	However, for setting the channel, see %NL80211_CMD_SET_CHANNEL
-@@ -171,7 +172,7 @@
-  *	%NL80211_ATTR_AKM_SUITES, %NL80211_ATTR_PRIVACY,
-  *	%NL80211_ATTR_AUTH_TYPE and %NL80211_ATTR_INACTIVITY_TIMEOUT.
-  *	The channel to use can be set on the interface or be given using the
-- *	%NL80211_ATTR_WIPHY_FREQ and %NL80211_ATTR_WIPHY_CHANNEL_TYPE attrs.
-+ *	%NL80211_ATTR_WIPHY_FREQ and the attributes determining channel width.
-  * @NL80211_CMD_NEW_BEACON: old alias for %NL80211_CMD_START_AP
-  * @NL80211_CMD_STOP_AP: Stop AP operation on the given interface
-  * @NL80211_CMD_DEL_BEACON: old alias for %NL80211_CMD_STOP_AP
-@@ -401,8 +402,7 @@
-  *	a response while being associated to an AP on another channel.
-  *	%NL80211_ATTR_IFINDEX is used to specify which interface (and thus
-  *	radio) is used. %NL80211_ATTR_WIPHY_FREQ is used to specify the
-- *	frequency for the operation and %NL80211_ATTR_WIPHY_CHANNEL_TYPE may be
-- *	optionally used to specify additional channel parameters.
-+ *	frequency for the operation.
-  *	%NL80211_ATTR_DURATION is used to specify the duration in milliseconds
-  *	to remain on the channel. This command is also used as an event to
-  *	notify when the requested duration starts (it may take a while for the
-@@ -440,12 +440,11 @@
-  *	as an event indicating reception of a frame that was not processed in
-  *	kernel code, but is for us (i.e., which may need to be processed in a
-  *	user space application). %NL80211_ATTR_FRAME is used to specify the
-- *	frame contents (including header). %NL80211_ATTR_WIPHY_FREQ (and
-- *	optionally %NL80211_ATTR_WIPHY_CHANNEL_TYPE) is used to indicate on
-- *	which channel the frame is to be transmitted or was received. If this
-- *	channel is not the current channel (remain-on-channel or the
-- *	operational channel) the device will switch to the given channel and
-- *	transmit the frame, optionally waiting for a response for the time
-+ *	frame contents (including header). %NL80211_ATTR_WIPHY_FREQ is used
-+ *	to indicate on which channel the frame is to be transmitted or was
-+ *	received. If this channel is not the current channel (remain-on-channel
-+ *	or the operational channel) the device will switch to the given channel
-+ *	and transmit the frame, optionally waiting for a response for the time
-  *	specified using %NL80211_ATTR_DURATION. When called, this operation
-  *	returns a cookie (%NL80211_ATTR_COOKIE) that will be included with the
-  *	TX status event pertaining to the TX request.
-@@ -473,8 +472,8 @@
-  *	command is used as an event to indicate the that a trigger level was
-  *	reached.
-  * @NL80211_CMD_SET_CHANNEL: Set the channel (using %NL80211_ATTR_WIPHY_FREQ
-- *	and %NL80211_ATTR_WIPHY_CHANNEL_TYPE) the given interface (identifed
-- *	by %NL80211_ATTR_IFINDEX) shall operate on.
-+ *	and the attributes determining channel width) the given interface
-+ *	(identifed by %NL80211_ATTR_IFINDEX) shall operate on.
-  *	In case multiple channels are supported by the device, the mechanism
-  *	with which it switches channels is implementation-defined.
-  *	When a monitor interface is given, it can only switch channel while
-@@ -526,6 +525,12 @@
-  *	of PMKSA caching dandidates.
-  *
-  * @NL80211_CMD_TDLS_OPER: Perform a high-level TDLS command (e.g. link setup).
-+ *	In addition, this can be used as an event to request userspace to take
-+ *	actions on TDLS links (set up a new link or tear down an existing one).
-+ *	In such events, %NL80211_ATTR_TDLS_OPERATION indicates the requested
-+ *	operation, %NL80211_ATTR_MAC contains the peer MAC address, and
-+ *	%NL80211_ATTR_REASON_CODE the reason code to be used (only with
-+ *	%NL80211_TDLS_TEARDOWN).
-  * @NL80211_CMD_TDLS_MGMT: Send a TDLS management frame.
-  *
-  * @NL80211_CMD_UNEXPECTED_FRAME: Used by an application controlling an AP
-@@ -562,8 +567,24 @@
-  *
-  * @NL80211_CMD_CH_SWITCH_NOTIFY: An AP or GO may decide to switch channels
-  *	independently of the userspace SME, send this event indicating
-- *	%NL80211_ATTR_IFINDEX is now on %NL80211_ATTR_WIPHY_FREQ with
-- *	%NL80211_ATTR_WIPHY_CHANNEL_TYPE.
-+ *	%NL80211_ATTR_IFINDEX is now on %NL80211_ATTR_WIPHY_FREQ and the
-+ *	attributes determining channel width.
-+ *
-+ * @NL80211_CMD_START_P2P_DEVICE: Start the given P2P Device, identified by
-+ *	its %NL80211_ATTR_WDEV identifier. It must have been created with
-+ *	%NL80211_CMD_NEW_INTERFACE previously. After it has been started, the
-+ *	P2P Device can be used for P2P operations, e.g. remain-on-channel and
-+ *	public action frame TX.
-+ * @NL80211_CMD_STOP_P2P_DEVICE: Stop the given P2P Device, identified by
-+ *	its %NL80211_ATTR_WDEV identifier.
-+ *
-+ * @NL80211_CMD_CONN_FAILED: connection request to an AP failed; used to
-+ *	notify userspace that AP has rejected the connection request from a
-+ *	station, due to particular reason. %NL80211_ATTR_CONN_FAILED_REASON
-+ *	is used for this.
-+ *
-+ * @NL80211_CMD_SET_MCAST_RATE: Change the rate used to send multicast frames
-+ *	for IBSS or MESH vif.
-  *
-  * @NL80211_CMD_MAX: highest used command number
-  * @__NL80211_CMD_AFTER_LAST: internal use
-@@ -708,6 +729,13 @@ enum nl80211_commands {
+@@ -1724,8 +1724,7 @@ enum nl80211_attrs {
+ 	NL80211_ATTR_MDID,
+ 	NL80211_ATTR_IE_RIC,
  
- 	NL80211_CMD_CH_SWITCH_NOTIFY,
- 
-+	NL80211_CMD_START_P2P_DEVICE,
-+	NL80211_CMD_STOP_P2P_DEVICE,
-+
-+	NL80211_CMD_CONN_FAILED,
-+
-+	NL80211_CMD_SET_MCAST_RATE,
-+
- 	/* add new commands above here */
- 
- 	/* used to define NL80211_CMD_MAX below */
-@@ -744,14 +772,26 @@ enum nl80211_commands {
-  *	/sys/class/ieee80211/<phyname>/index
-  * @NL80211_ATTR_WIPHY_NAME: wiphy name (used for renaming)
-  * @NL80211_ATTR_WIPHY_TXQ_PARAMS: a nested array of TX queue parameters
-- * @NL80211_ATTR_WIPHY_FREQ: frequency of the selected channel in MHz
-+ * @NL80211_ATTR_WIPHY_FREQ: frequency of the selected channel in MHz,
-+ *	defines the channel together with the (deprecated)
-+ *	%NL80211_ATTR_WIPHY_CHANNEL_TYPE attribute or the attributes
-+ *	%NL80211_ATTR_CHANNEL_WIDTH and if needed %NL80211_ATTR_CENTER_FREQ1
-+ *	and %NL80211_ATTR_CENTER_FREQ2
-+ * @NL80211_ATTR_CHANNEL_WIDTH: u32 attribute containing one of the values
-+ *	of &enum nl80211_chan_width, describing the channel width. See the
-+ *	documentation of the enum for more information.
-+ * @NL80211_ATTR_CENTER_FREQ1: Center frequency of the first part of the
-+ *	channel, used for anything but 20 MHz bandwidth
-+ * @NL80211_ATTR_CENTER_FREQ2: Center frequency of the second part of the
-+ *	channel, used only for 80+80 MHz bandwidth
-  * @NL80211_ATTR_WIPHY_CHANNEL_TYPE: included with NL80211_ATTR_WIPHY_FREQ
-- *	if HT20 or HT40 are allowed (i.e., 802.11n disabled if not included):
-+ *	if HT20 or HT40 are to be used (i.e., HT disabled if not included):
-  *	NL80211_CHAN_NO_HT = HT not allowed (i.e., same as not including
-  *		this attribute)
-  *	NL80211_CHAN_HT20 = HT20 only
-  *	NL80211_CHAN_HT40MINUS = secondary channel is below the primary channel
-  *	NL80211_CHAN_HT40PLUS = secondary channel is above the primary channel
-+ *	This attribute is now deprecated.
-  * @NL80211_ATTR_WIPHY_RETRY_SHORT: TX retry limit for frames whose length is
-  *	less than or equal to the RTS threshold; allowed range: 1..255;
-  *	dot11ShortRetryLimit; u8
-@@ -1251,6 +1291,25 @@ enum nl80211_commands {
-  *	was used to provide the hint. For the different types of
-  *	allowed user regulatory hints see nl80211_user_reg_hint_type.
-  *
-+ * @NL80211_ATTR_CONN_FAILED_REASON: The reason for which AP has rejected
-+ *	the connection request from a station. nl80211_connect_failed_reason
-+ *	enum has different reasons of connection failure.
-+ *
-+ * @NL80211_ATTR_SAE_DATA: SAE elements in Authentication frames. This starts
-+ *	with the Authentication transaction sequence number field.
-+ *
-+ * @NL80211_ATTR_VHT_CAPABILITY: VHT Capability information element (from
-+ *	association request when used with NL80211_CMD_NEW_STATION)
-+ *
-+ * @NL80211_ATTR_SCAN_FLAGS: scan request control flags (u32)
-+ *
-+ * @NL80211_ATTR_P2P_CTWINDOW: P2P GO Client Traffic Window (u8), used with
-+ *	the START_AP and SET_BSS commands
-+ * @NL80211_ATTR_P2P_OPPPS: P2P GO opportunistic PS (u8), used with the
-+ *	START_AP and SET_BSS commands. This can have the values 0 or 1;
-+ *	if not given in START_AP 0 is assumed, if not given in SET_BSS
-+ *	no change is made.
-+ *
-  * @NL80211_ATTR_MAX: highest attribute number currently defined
-  * @__NL80211_ATTR_AFTER_LAST: internal use
-  */
-@@ -1506,6 +1565,23 @@ enum nl80211_attrs {
- 
- 	NL80211_ATTR_USER_REG_HINT_TYPE,
- 
-+	NL80211_ATTR_CONN_FAILED_REASON,
-+
-+	NL80211_ATTR_SAE_DATA,
-+
-+	NL80211_ATTR_VHT_CAPABILITY,
-+
-+	NL80211_ATTR_SCAN_FLAGS,
-+
-+	NL80211_ATTR_CHANNEL_WIDTH,
-+	NL80211_ATTR_CENTER_FREQ1,
-+	NL80211_ATTR_CENTER_FREQ2,
-+
-+	NL80211_ATTR_P2P_CTWINDOW,
-+	NL80211_ATTR_P2P_OPPPS,
-+
+-	NL80211_ATTR_CRIT_PROT_ID,
+-	NL80211_ATTR_MAX_CRIT_PROT_DURATION,
 +	NL80211_ATTR_WIPHY_ANTENNA_GAIN,
-+
- 	/* add attributes here, update the policy in nl80211.c */
- 
- 	__NL80211_ATTR_AFTER_LAST,
-@@ -1549,6 +1625,7 @@ enum nl80211_attrs {
- #define NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY	16
- #define NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY	24
- #define NL80211_HT_CAPABILITY_LEN		26
-+#define NL80211_VHT_CAPABILITY_LEN		12
- 
- #define NL80211_MAX_NR_CIPHER_SUITES		5
- #define NL80211_MAX_NR_AKM_SUITES		2
-@@ -1575,6 +1652,10 @@ enum nl80211_attrs {
-  * @NL80211_IFTYPE_MESH_POINT: mesh point
-  * @NL80211_IFTYPE_P2P_CLIENT: P2P client
-  * @NL80211_IFTYPE_P2P_GO: P2P group owner
-+ * @NL80211_IFTYPE_P2P_DEVICE: P2P device interface type, this is not a netdev
-+ *	and therefore can't be created in the normal ways, use the
-+ *	%NL80211_CMD_START_P2P_DEVICE and %NL80211_CMD_STOP_P2P_DEVICE
-+ *	commands to create and destroy one
-  * @NL80211_IFTYPE_MAX: highest interface type number currently defined
-  * @NUM_NL80211_IFTYPES: number of defined interface types
-  *
-@@ -1593,6 +1674,7 @@ enum nl80211_iftype {
- 	NL80211_IFTYPE_MESH_POINT,
- 	NL80211_IFTYPE_P2P_CLIENT,
- 	NL80211_IFTYPE_P2P_GO,
-+	NL80211_IFTYPE_P2P_DEVICE,
  
- 	/* keep last */
- 	NUM_NL80211_IFTYPES,
-@@ -1664,10 +1746,15 @@ struct nl80211_sta_flag_update {
-  * @__NL80211_RATE_INFO_INVALID: attribute number 0 is reserved
-  * @NL80211_RATE_INFO_BITRATE: total bitrate (u16, 100kbit/s)
-  * @NL80211_RATE_INFO_MCS: mcs index for 802.11n (u8)
-- * @NL80211_RATE_INFO_40_MHZ_WIDTH: 40 Mhz dualchannel bitrate
-+ * @NL80211_RATE_INFO_40_MHZ_WIDTH: 40 MHz dualchannel bitrate
-  * @NL80211_RATE_INFO_SHORT_GI: 400ns guard interval
-  * @NL80211_RATE_INFO_BITRATE32: total bitrate (u32, 100kbit/s)
-  * @NL80211_RATE_INFO_MAX: highest rate_info number currently defined
-+ * @NL80211_RATE_INFO_VHT_MCS: MCS index for VHT (u8)
-+ * @NL80211_RATE_INFO_VHT_NSS: number of streams in VHT (u8)
-+ * @NL80211_RATE_INFO_80_MHZ_WIDTH: 80 MHz VHT rate
-+ * @NL80211_RATE_INFO_80P80_MHZ_WIDTH: 80+80 MHz VHT rate
-+ * @NL80211_RATE_INFO_160_MHZ_WIDTH: 160 MHz VHT rate
-  * @__NL80211_RATE_INFO_AFTER_LAST: internal use
-  */
- enum nl80211_rate_info {
-@@ -1677,6 +1764,11 @@ enum nl80211_rate_info {
- 	NL80211_RATE_INFO_40_MHZ_WIDTH,
- 	NL80211_RATE_INFO_SHORT_GI,
- 	NL80211_RATE_INFO_BITRATE32,
-+	NL80211_RATE_INFO_VHT_MCS,
-+	NL80211_RATE_INFO_VHT_NSS,
-+	NL80211_RATE_INFO_80_MHZ_WIDTH,
-+	NL80211_RATE_INFO_80P80_MHZ_WIDTH,
-+	NL80211_RATE_INFO_160_MHZ_WIDTH,
+ 	/* add attributes here, update the policy in nl80211.c */
  
- 	/* keep last */
- 	__NL80211_RATE_INFO_AFTER_LAST,
-@@ -1744,6 +1836,8 @@ enum nl80211_sta_bss_param {
-  * @NL80211_STA_INFO_STA_FLAGS: Contains a struct nl80211_sta_flag_update.
-  * @NL80211_STA_INFO_BEACON_LOSS: count of times beacon loss was detected (u32)
-  * @NL80211_STA_INFO_T_OFFSET: timing offset with respect to this STA (s64)
+@@ -1991,6 +1990,10 @@ enum nl80211_sta_bss_param {
+  * @NL80211_STA_INFO_PEER_PM: peer mesh STA link-specific power mode
+  * @NL80211_STA_INFO_NONPEER_PM: neighbor mesh STA power save mode towards
+  *	non-peer STA
 + * @NL80211_STA_INFO_CHAIN_SIGNAL: per-chain signal strength of last PPDU
++ *	Contains a nested array of signal strength attributes (u8, dBm)
 + * @NL80211_STA_INFO_CHAIN_SIGNAL_AVG: per-chain signal strength average
++ *	Same format as NL80211_STA_INFO_CHAIN_SIGNAL.
   * @__NL80211_STA_INFO_AFTER_LAST: internal
   * @NL80211_STA_INFO_MAX: highest possible station info attribute
   */
-@@ -1768,6 +1862,8 @@ enum nl80211_sta_info {
- 	NL80211_STA_INFO_STA_FLAGS,
- 	NL80211_STA_INFO_BEACON_LOSS,
- 	NL80211_STA_INFO_T_OFFSET,
+@@ -2020,6 +2023,8 @@ enum nl80211_sta_info {
+ 	NL80211_STA_INFO_NONPEER_PM,
+ 	NL80211_STA_INFO_RX_BYTES64,
+ 	NL80211_STA_INFO_TX_BYTES64,
 +	NL80211_STA_INFO_CHAIN_SIGNAL,
 +	NL80211_STA_INFO_CHAIN_SIGNAL_AVG,
  
  	/* keep last */
  	__NL80211_STA_INFO_AFTER_LAST,
-@@ -2385,6 +2481,15 @@ enum nl80211_ac {
- #define NL80211_TXQ_Q_BE	NL80211_AC_BE
- #define NL80211_TXQ_Q_BK	NL80211_AC_BK
- 
-+/**
-+ * enum nl80211_channel_type - channel type
-+ * @NL80211_CHAN_NO_HT: 20 MHz, non-HT channel
-+ * @NL80211_CHAN_HT20: 20 MHz HT channel
-+ * @NL80211_CHAN_HT40MINUS: HT40 channel, secondary channel
-+ *	below the control channel
-+ * @NL80211_CHAN_HT40PLUS: HT40 channel, secondary channel
-+ *	above the control channel
-+ */
- enum nl80211_channel_type {
- 	NL80211_CHAN_NO_HT,
- 	NL80211_CHAN_HT20,
-@@ -2393,6 +2498,32 @@ enum nl80211_channel_type {
- };
- 
- /**
-+ * enum nl80211_chan_width - channel width definitions
-+ *
-+ * These values are used with the %NL80211_ATTR_CHANNEL_WIDTH
-+ * attribute.
-+ *
-+ * @NL80211_CHAN_WIDTH_20_NOHT: 20 MHz, non-HT channel
-+ * @NL80211_CHAN_WIDTH_20: 20 MHz HT channel
-+ * @NL80211_CHAN_WIDTH_40: 40 MHz channel, the %NL80211_ATTR_CENTER_FREQ1
-+ *	attribute must be provided as well
-+ * @NL80211_CHAN_WIDTH_80: 80 MHz channel, the %NL80211_ATTR_CENTER_FREQ1
-+ *	attribute must be provided as well
-+ * @NL80211_CHAN_WIDTH_80P80: 80+80 MHz channel, the %NL80211_ATTR_CENTER_FREQ1
-+ *	and %NL80211_ATTR_CENTER_FREQ2 attributes must be provided as well
-+ * @NL80211_CHAN_WIDTH_160: 160 MHz channel, the %NL80211_ATTR_CENTER_FREQ1
-+ *	attribute must be provided as well
-+ */
-+enum nl80211_chan_width {
-+	NL80211_CHAN_WIDTH_20_NOHT,
-+	NL80211_CHAN_WIDTH_20,
-+	NL80211_CHAN_WIDTH_40,
-+	NL80211_CHAN_WIDTH_80,
-+	NL80211_CHAN_WIDTH_80P80,
-+	NL80211_CHAN_WIDTH_160,
-+};
-+
-+/**
-  * enum nl80211_bss - netlink attributes for a BSS
-  *
-  * @__NL80211_BSS_INVALID: invalid
-@@ -2460,6 +2591,7 @@ enum nl80211_bss_status {
-  * @NL80211_AUTHTYPE_SHARED_KEY: Shared Key authentication (WEP only)
-  * @NL80211_AUTHTYPE_FT: Fast BSS Transition (IEEE 802.11r)
-  * @NL80211_AUTHTYPE_NETWORK_EAP: Network EAP (some Cisco APs and mainly LEAP)
-+ * @NL80211_AUTHTYPE_SAE: Simultaneous authentication of equals
-  * @__NL80211_AUTHTYPE_NUM: internal
-  * @NL80211_AUTHTYPE_MAX: maximum valid auth algorithm
-  * @NL80211_AUTHTYPE_AUTOMATIC: determine automatically (if necessary by
-@@ -2471,6 +2603,7 @@ enum nl80211_auth_type {
- 	NL80211_AUTHTYPE_SHARED_KEY,
- 	NL80211_AUTHTYPE_FT,
- 	NL80211_AUTHTYPE_NETWORK_EAP,
-+	NL80211_AUTHTYPE_SAE,
- 
- 	/* keep last */
- 	__NL80211_AUTHTYPE_NUM,
-@@ -2994,12 +3127,40 @@ enum nl80211_ap_sme_features {
-  * @NL80211_FEATURE_CELL_BASE_REG_HINTS: This driver has been tested
-  *	to work properly to suppport receiving regulatory hints from
-  *	cellular base stations.
-+ * @NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL: If this is set, an active
-+ *	P2P Device (%NL80211_IFTYPE_P2P_DEVICE) requires its own channel
-+ *	in the interface combinations, even when it's only used for scan
-+ *	and remain-on-channel. This could be due to, for example, the
-+ *	remain-on-channel implementation requiring a channel context.
-+ * @NL80211_FEATURE_SAE: This driver supports simultaneous authentication of
-+ *	equals (SAE) with user space SME (NL80211_CMD_AUTHENTICATE) in station
-+ *	mode
-+ * @NL80211_FEATURE_LOW_PRIORITY_SCAN: This driver supports low priority scan
-+ * @NL80211_FEATURE_SCAN_FLUSH: Scan flush is supported
-+ * @NL80211_FEATURE_AP_SCAN: Support scanning using an AP vif
-+ * @NL80211_FEATURE_VIF_TXPOWER: The driver supports per-vif TX power setting
-+ * @NL80211_FEATURE_NEED_OBSS_SCAN: The driver expects userspace to perform
-+ *	OBSS scans and generate 20/40 BSS coex reports. This flag is used only
-+ *	for drivers implementing the CONNECT API, for AUTH/ASSOC it is implied.
-+ * @NL80211_FEATURE_P2P_GO_CTWIN: P2P GO implementation supports CT Window
-+ *	setting
-+ * @NL80211_FEATURE_P2P_GO_OPPPS: P2P GO implementation supports opportunistic
-+ *	powersave
-  */
- enum nl80211_feature_flags {
--	NL80211_FEATURE_SK_TX_STATUS	= 1 << 0,
--	NL80211_FEATURE_HT_IBSS		= 1 << 1,
--	NL80211_FEATURE_INACTIVITY_TIMER = 1 << 2,
--	NL80211_FEATURE_CELL_BASE_REG_HINTS = 1 << 3,
-+	NL80211_FEATURE_SK_TX_STATUS			= 1 << 0,
-+	NL80211_FEATURE_HT_IBSS				= 1 << 1,
-+	NL80211_FEATURE_INACTIVITY_TIMER		= 1 << 2,
-+	NL80211_FEATURE_CELL_BASE_REG_HINTS		= 1 << 3,
-+	NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL	= 1 << 4,
-+	NL80211_FEATURE_SAE				= 1 << 5,
-+	NL80211_FEATURE_LOW_PRIORITY_SCAN		= 1 << 6,
-+	NL80211_FEATURE_SCAN_FLUSH			= 1 << 7,
-+	NL80211_FEATURE_AP_SCAN				= 1 << 8,
-+	NL80211_FEATURE_VIF_TXPOWER			= 1 << 9,
-+	NL80211_FEATURE_NEED_OBSS_SCAN			= 1 << 10,
-+	NL80211_FEATURE_P2P_GO_CTWIN			= 1 << 11,
-+	NL80211_FEATURE_P2P_GO_OPPPS			= 1 << 12,
- };
- 
- /**
-@@ -3023,4 +3184,36 @@ enum nl80211_probe_resp_offload_support_
- 	NL80211_PROBE_RESP_OFFLOAD_SUPPORT_80211U =	1<<3,
- };
- 
-+/**
-+ * enum nl80211_connect_failed_reason - connection request failed reasons
-+ * @NL80211_CONN_FAIL_MAX_CLIENTS: Maximum number of clients that can be
-+ *	handled by the AP is reached.
-+ * @NL80211_CONN_FAIL_BLOCKED_CLIENT: Client's MAC is in the AP's blocklist.
-+ */
-+enum nl80211_connect_failed_reason {
-+	NL80211_CONN_FAIL_MAX_CLIENTS,
-+	NL80211_CONN_FAIL_BLOCKED_CLIENT,
-+};
-+
-+/**
-+ * enum nl80211_scan_flags -  scan request control flags
-+ *
-+ * Scan request control flags are used to control the handling
-+ * of NL80211_CMD_TRIGGER_SCAN and NL80211_CMD_START_SCHED_SCAN
-+ * requests.
-+ *
-+ * @NL80211_SCAN_FLAG_LOW_PRIORITY: scan request has low priority
-+ * @NL80211_SCAN_FLAG_FLUSH: flush cache before scanning
-+ * @NL80211_SCAN_FLAG_AP: force a scan even if the interface is configured
-+ *	as AP and the beaconing has already been configured. This attribute is
-+ *	dangerous because will destroy stations performance as a lot of frames
-+ *	will be lost while scanning off-channel, therefore it must be used only
-+ *	when really needed
-+ */
-+enum nl80211_scan_flags {
-+	NL80211_SCAN_FLAG_LOW_PRIORITY			= 1<<0,
-+	NL80211_SCAN_FLAG_FLUSH				= 1<<1,
-+	NL80211_SCAN_FLAG_AP				= 1<<2,
-+};
-+
- #endif /* __LINUX_NL80211_H */
diff --git a/package/network/utils/iw/patches/100-rx_rate.patch b/package/network/utils/iw/patches/100-rx_rate.patch
index 642b9f357..cc23e0750 100644
--- a/package/network/utils/iw/patches/100-rx_rate.patch
+++ b/package/network/utils/iw/patches/100-rx_rate.patch
@@ -1,55 +1,15 @@
 --- a/station.c
 +++ b/station.c
-@@ -29,13 +29,47 @@ enum plink_actions {
- 	PLINK_ACTION_BLOCK,
- };
+@@ -43,7 +43,7 @@ static void print_power_mode(struct nlat
+ 	}
+ }
  
-+static void print_sta_bitrate(struct nlattr *nla, const char *name)
-+{
-+	struct nlattr *rinfo[NL80211_RATE_INFO_MAX + 1];
-+
-+	static struct nla_policy rate_policy[NL80211_RATE_INFO_MAX + 1] = {
-+		[NL80211_RATE_INFO_BITRATE] = { .type = NLA_U16 },
-+		[NL80211_RATE_INFO_BITRATE32] = { .type = NLA_U32 },
-+		[NL80211_RATE_INFO_MCS] = { .type = NLA_U8 },
-+		[NL80211_RATE_INFO_40_MHZ_WIDTH] = { .type = NLA_FLAG },
-+		[NL80211_RATE_INFO_SHORT_GI] = { .type = NLA_FLAG },
-+	};
-+
-+	if (!nla)
-+		return;
-+
-+	if (nla_parse_nested(rinfo, NL80211_RATE_INFO_MAX, nla, rate_policy)) {
-+		fprintf(stderr, "failed to parse nested rate attributes!\n");
-+	} else {
-+		int rate = 0;
-+		printf("\n\t%s:\t", name);
-+		if (rinfo[NL80211_RATE_INFO_BITRATE32])
-+			rate = nla_get_u32(rinfo[NL80211_RATE_INFO_BITRATE32]);
-+		else if (rinfo[NL80211_RATE_INFO_BITRATE])
-+			rate = nla_get_u16(rinfo[NL80211_RATE_INFO_BITRATE]);
-+		if (rate > 0)
-+			printf("%d.%d MBit/s", rate / 10, rate % 10);
-+
-+		if (rinfo[NL80211_RATE_INFO_MCS])
-+			printf(" MCS %d", nla_get_u8(rinfo[NL80211_RATE_INFO_MCS]));
-+		if (rinfo[NL80211_RATE_INFO_40_MHZ_WIDTH])
-+			printf(" 40Mhz");
-+		if (rinfo[NL80211_RATE_INFO_SHORT_GI])
-+			printf(" short GI");
-+	}
-+}
- 
- static int print_sta_handler(struct nl_msg *msg, void *arg)
+-void parse_tx_bitrate(struct nlattr *bitrate_attr, char *buf, int buflen)
++void parse_bitrate(struct nlattr *bitrate_attr, char *buf, int buflen)
  {
- 	struct nlattr *tb[NL80211_ATTR_MAX + 1];
- 	struct genlmsghdr *gnlh = nlmsg_data(nlmsg_hdr(msg));
- 	struct nlattr *sinfo[NL80211_STA_INFO_MAX + 1];
--	struct nlattr *rinfo[NL80211_RATE_INFO_MAX + 1];
- 	char mac_addr[20], state_name[10], dev[20];
- 	struct nl80211_sta_flag_update *sta_flags;
- 	static struct nla_policy stats_policy[NL80211_STA_INFO_MAX + 1] = {
-@@ -47,6 +81,7 @@ static int print_sta_handler(struct nl_m
+ 	int rate = 0;
+ 	char *pos = buf;
+@@ -107,6 +107,7 @@ static int print_sta_handler(struct nl_m
  		[NL80211_STA_INFO_SIGNAL] = { .type = NLA_U8 },
  		[NL80211_STA_INFO_T_OFFSET] = { .type = NLA_U64 },
  		[NL80211_STA_INFO_TX_BITRATE] = { .type = NLA_NESTED },
@@ -57,49 +17,44 @@
  		[NL80211_STA_INFO_LLID] = { .type = NLA_U16 },
  		[NL80211_STA_INFO_PLID] = { .type = NLA_U16 },
  		[NL80211_STA_INFO_PLINK_STATE] = { .type = NLA_U8 },
-@@ -56,14 +91,6 @@ static int print_sta_handler(struct nl_m
- 			{ .minlen = sizeof(struct nl80211_sta_flag_update) },
- 	};
- 
--	static struct nla_policy rate_policy[NL80211_RATE_INFO_MAX + 1] = {
--		[NL80211_RATE_INFO_BITRATE] = { .type = NLA_U16 },
--		[NL80211_RATE_INFO_BITRATE32] = { .type = NLA_U32 },
--		[NL80211_RATE_INFO_MCS] = { .type = NLA_U8 },
--		[NL80211_RATE_INFO_40_MHZ_WIDTH] = { .type = NLA_FLAG },
--		[NL80211_RATE_INFO_SHORT_GI] = { .type = NLA_FLAG },
--	};
--
- 	nla_parse(tb, NL80211_ATTR_MAX, genlmsg_attrdata(gnlh, 0),
- 		  genlmsg_attrlen(gnlh, 0), NULL);
- 
-@@ -119,28 +146,8 @@ static int print_sta_handler(struct nl_m
- 		printf("\n\tToffset:\t%lld us",
- 			(unsigned long long)nla_get_u64(sinfo[NL80211_STA_INFO_T_OFFSET]));
+@@ -177,10 +178,17 @@ static int print_sta_handler(struct nl_m
+ 	if (sinfo[NL80211_STA_INFO_TX_BITRATE]) {
+ 		char buf[100];
  
--	if (sinfo[NL80211_STA_INFO_TX_BITRATE]) {
--		if (nla_parse_nested(rinfo, NL80211_RATE_INFO_MAX,
--				     sinfo[NL80211_STA_INFO_TX_BITRATE], rate_policy)) {
--			fprintf(stderr, "failed to parse nested rate attributes!\n");
--		} else {
--			int rate = 0;
--			printf("\n\ttx bitrate:\t");
--			if (rinfo[NL80211_RATE_INFO_BITRATE32])
--				rate = nla_get_u32(rinfo[NL80211_RATE_INFO_BITRATE32]);
--			else if (rinfo[NL80211_RATE_INFO_BITRATE])
--				rate = nla_get_u16(rinfo[NL80211_RATE_INFO_BITRATE]);
--			if (rate > 0)
--				printf("%d.%d MBit/s", rate / 10, rate % 10);
--
--			if (rinfo[NL80211_RATE_INFO_MCS])
--				printf(" MCS %d", nla_get_u8(rinfo[NL80211_RATE_INFO_MCS]));
--			if (rinfo[NL80211_RATE_INFO_40_MHZ_WIDTH])
--				printf(" 40Mhz");
--			if (rinfo[NL80211_RATE_INFO_SHORT_GI])
--				printf(" short GI");
--		}
--	}
-+	print_sta_bitrate(sinfo[NL80211_STA_INFO_TX_BITRATE], "tx bitrate");
-+	print_sta_bitrate(sinfo[NL80211_STA_INFO_RX_BITRATE], "rx bitrate");
+-		parse_tx_bitrate(sinfo[NL80211_STA_INFO_TX_BITRATE], buf, sizeof(buf));
++		parse_bitrate(sinfo[NL80211_STA_INFO_TX_BITRATE], buf, sizeof(buf));
+ 		printf("\n\ttx bitrate:\t%s", buf);
+ 	}
  
++	if (sinfo[NL80211_STA_INFO_RX_BITRATE]) {
++		char buf[100];
++
++		parse_bitrate(sinfo[NL80211_STA_INFO_RX_BITRATE], buf, sizeof(buf));
++		printf("\n\trx bitrate:\t%s", buf);
++	}
++
  	if (sinfo[NL80211_STA_INFO_LLID])
  		printf("\n\tmesh llid:\t%d",
+ 			nla_get_u16(sinfo[NL80211_STA_INFO_LLID]));
+--- a/iw.h
++++ b/iw.h
+@@ -170,7 +170,7 @@ enum print_ie_type {
+ void print_ies(unsigned char *ie, int ielen, bool unknown,
+ 	       enum print_ie_type ptype);
+ 
+-void parse_tx_bitrate(struct nlattr *bitrate_attr, char *buf, int buflen);
++void parse_bitrate(struct nlattr *bitrate_attr, char *buf, int buflen);
+ 
+ DECLARE_SECTION(set);
+ DECLARE_SECTION(get);
+--- a/link.c
++++ b/link.c
+@@ -165,7 +165,7 @@ static int print_link_sta(struct nl_msg 
+ 	if (sinfo[NL80211_STA_INFO_TX_BITRATE]) {
+ 		char buf[100];
+ 
+-		parse_tx_bitrate(sinfo[NL80211_STA_INFO_TX_BITRATE], buf, sizeof(buf));
++		parse_bitrate(sinfo[NL80211_STA_INFO_TX_BITRATE], buf, sizeof(buf));
+ 		printf("\ttx bitrate: %s\n", buf);
+ 	}
+ 
diff --git a/package/network/utils/iw/patches/110-per_chain_signal_strength.patch b/package/network/utils/iw/patches/110-per_chain_signal_strength.patch
index 813a7d916..e519a86c6 100644
--- a/package/network/utils/iw/patches/110-per_chain_signal_strength.patch
+++ b/package/network/utils/iw/patches/110-per_chain_signal_strength.patch
@@ -1,7 +1,7 @@
 --- a/station.c
 +++ b/station.c
-@@ -65,6 +65,33 @@ static void print_sta_bitrate(struct nla
- 	}
+@@ -91,6 +91,33 @@ void parse_bitrate(struct nlattr *bitrat
+ 				" VHT-NSS %d", nla_get_u8(rinfo[NL80211_RATE_INFO_VHT_NSS]));
  }
  
 +static char *get_chain_signal(struct nlattr *attr_list)
@@ -34,10 +34,10 @@
  static int print_sta_handler(struct nl_msg *msg, void *arg)
  {
  	struct nlattr *tb[NL80211_ATTR_MAX + 1];
-@@ -89,7 +116,10 @@ static int print_sta_handler(struct nl_m
- 		[NL80211_STA_INFO_TX_FAILED] = { .type = NLA_U32 },
- 		[NL80211_STA_INFO_STA_FLAGS] =
- 			{ .minlen = sizeof(struct nl80211_sta_flag_update) },
+@@ -118,7 +145,10 @@ static int print_sta_handler(struct nl_m
+ 		[NL80211_STA_INFO_LOCAL_PM] = { .type = NLA_U32},
+ 		[NL80211_STA_INFO_PEER_PM] = { .type = NLA_U32},
+ 		[NL80211_STA_INFO_NONPEER_PM] = { .type = NLA_U32},
 +		[NL80211_STA_INFO_CHAIN_SIGNAL] = { .type = NLA_NESTED },
 +		[NL80211_STA_INFO_CHAIN_SIGNAL_AVG] = { .type = NLA_NESTED },
  	};
@@ -45,7 +45,7 @@
  
  	nla_parse(tb, NL80211_ATTR_MAX, genlmsg_attrdata(gnlh, 0),
  		  genlmsg_attrlen(gnlh, 0), NULL);
-@@ -136,12 +166,19 @@ static int print_sta_handler(struct nl_m
+@@ -165,12 +195,19 @@ static int print_sta_handler(struct nl_m
  	if (sinfo[NL80211_STA_INFO_TX_FAILED])
  		printf("\n\ttx failed:\t%u",
  			nla_get_u32(sinfo[NL80211_STA_INFO_TX_FAILED]));
diff --git a/package/network/utils/iw/patches/130-antenna_gain.patch b/package/network/utils/iw/patches/120-antenna_gain.patch
index f3ca691e5..36043611d 100644
--- a/package/network/utils/iw/patches/130-antenna_gain.patch
+++ b/package/network/utils/iw/patches/120-antenna_gain.patch
@@ -1,6 +1,6 @@
 --- a/phy.c
 +++ b/phy.c
-@@ -359,3 +359,31 @@ COMMAND(set, antenna, "<bitmap> | all | 
+@@ -421,3 +421,31 @@ COMMAND(set, antenna, "<bitmap> | all | 
  	NL80211_CMD_SET_WIPHY, 0, CIB_PHY, handle_antenna,
  	"Set a bitmap of allowed antennas to use for TX and RX.\n"
  	"The driver may reject antenna configurations it cannot support.");
diff --git a/package/network/utils/iw/patches/120-tdls_peer_indentation.patch b/package/network/utils/iw/patches/120-tdls_peer_indentation.patch
deleted file mode 100644
index 68368734e..000000000
--- a/package/network/utils/iw/patches/120-tdls_peer_indentation.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/station.c
-+++ b/station.c
-@@ -267,7 +267,7 @@ static int print_sta_handler(struct nl_m
- 		}
- 
- 		if (sta_flags->mask & BIT(NL80211_STA_FLAG_TDLS_PEER)) {
--			printf("\n\tTDLS peer:\t\t");
-+			printf("\n\tTDLS peer:\t");
- 			if (sta_flags->set & BIT(NL80211_STA_FLAG_TDLS_PEER))
- 				printf("yes");
- 			else