summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorwbx <wbx@3c298f89-4303-0410-b956-a3cf2f4a3e73>2005-12-25 20:04:16 +0000
committerwbx <wbx@3c298f89-4303-0410-b956-a3cf2f4a3e73>2005-12-25 20:04:16 +0000
commitb6ef8792f8af466fb45ca63e6fbf96855ac558c6 (patch)
treee8f4a1d1f44b6f894d71da773fd2ae8515acab0e
parent91d42f6ac22bca42fb81846e82d6c4a66957809d (diff)
first ar531x support for 2.4, thx Mile Albon, some addons from me for mips big endian toolchain
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@2781 3c298f89-4303-0410-b956-a3cf2f4a3e73
Diffstat
-rw-r--r--openwrt/Config.in11
-rw-r--r--openwrt/Config.in.devel6
-rw-r--r--openwrt/target/linux/Config.in8
-rw-r--r--openwrt/target/linux/Makefile1
-rw-r--r--openwrt/target/linux/linux-2.4/config/ar531x1098
-rw-r--r--openwrt/target/linux/linux-2.4/patches/ar531x/000-atheros-support.patch2642
-rw-r--r--openwrt/target/linux/linux-2.4/patches/ar531x/001-ar531x-ethernet.patch4890
-rw-r--r--openwrt/target/linux/package/diag/Config.in4
-rw-r--r--openwrt/target/linux/package/madwifi/Config.in1
-rw-r--r--openwrt/target/linux/package/switch/Config.in1
-rw-r--r--openwrt/target/linux/rules.mk1
-rw-r--r--openwrt/toolchain/kernel-headers/Makefile1
-rw-r--r--openwrt/toolchain/uClibc/files/config.mipseb163
13 files changed, 8817 insertions, 10 deletions
diff --git a/openwrt/Config.in b/openwrt/Config.in
index 3f5cb29c5..c93b1f17c 100644
--- a/openwrt/Config.in
+++ b/openwrt/Config.in
@@ -11,12 +11,11 @@ config BR2_HAVE_DOT_CONFIG
default y
config BR2_mipsel
+ bool
default y
choice
- default BR2_mipsel
- help
- Stuff
+ prompt "Target Architecture" if CONFIG_DEVEL
config BR2_arm
bool "arm"
@@ -33,8 +32,8 @@ config BR2_i386
config BR2_m68k
bool "m68k"
-config BR2_mips
- bool "mips"
+config BR2_mipseb
+ bool "mipseb"
config BR2_mipsel
bool "mipsel"
@@ -66,7 +65,7 @@ config BR2_ARCH
default "cris" if BR2_cris
default "i386" if BR2_i386
default "m68k" if BR2_m68k
- default "mips" if BR2_mips
+ default "mipseb" if BR2_mipseb
default "mipsel" if BR2_mipsel || !CONFIG_DEVEL
default "powerpc" if BR2_powerpc
default "sh3" if BR2_sh3
diff --git a/openwrt/Config.in.devel b/openwrt/Config.in.devel
index 38e79b9e6..ad423162b 100644
--- a/openwrt/Config.in.devel
+++ b/openwrt/Config.in.devel
@@ -35,8 +35,8 @@ config BR2_i386
config BR2_m68k
bool "m68k"
-config BR2_mips
- bool "mips"
+config BR2_mipseb
+ bool "mipseb"
config BR2_mipsel
bool "mipsel"
@@ -68,7 +68,7 @@ config BR2_ARCH
default "cris" if BR2_cris
default "i386" if BR2_i386
default "m68k" if BR2_m68k
- default "mips" if BR2_mips
+ default "mipseb" if BR2_mipseb
default "mipsel" if BR2_mipsel
default "powerpc" if BR2_powerpc
default "sh3" if BR2_sh3
diff --git a/openwrt/target/linux/Config.in b/openwrt/target/linux/Config.in
index 9442c9fc9..9f3b52594 100644
--- a/openwrt/target/linux/Config.in
+++ b/openwrt/target/linux/Config.in
@@ -48,6 +48,14 @@ config BR2_LINUX_2_6_X86
Build firmware images for x86 based boards
(e.g. Soekris net4521 and net4801, PC Engines WRAP...)
+config BR2_LINUX_2_4_AR531X
+ bool "Support for Atheros ar531x based APs"
+ default n
+ depends BR2_mipseb
+ help
+ Build firmware images for Atheros ar531x based boards
+ (e.g. Netgear WGT624, Linksys WRT55AG)
+
endchoice
diff --git a/openwrt/target/linux/Makefile b/openwrt/target/linux/Makefile
index 02ed636d1..5dfe12ad7 100644
--- a/openwrt/target/linux/Makefile
+++ b/openwrt/target/linux/Makefile
@@ -88,3 +88,4 @@ $(eval $(call kernel_template,2.4,ar7,2_4_AR7))
$(eval $(call kernel_template,2.4,x86,2_4_X86))
$(eval $(call kernel_template,2.6,brcm,2_6_BRCM))
$(eval $(call kernel_template,2.6,x86,2_6_X86))
+$(eval $(call kernel_template,2.4,ar531x,2_4_AR531X))
diff --git a/openwrt/target/linux/linux-2.4/config/ar531x b/openwrt/target/linux/linux-2.4/config/ar531x
new file mode 100644
index 000000000..3db1f57c3
--- /dev/null
+++ b/openwrt/target/linux/linux-2.4/config/ar531x
@@ -0,0 +1,1098 @@
+#
+# Automatically generated by make menuconfig: don't edit
+#
+CONFIG_MIPS=y
+CONFIG_MIPS32=y
+# CONFIG_MIPS64 is not set
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+# CONFIG_MODVERSIONS is not set
+CONFIG_KMOD=y
+
+#
+# Machine selection
+#
+# CONFIG_ACER_PICA_61 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_FICMMP is not set
+# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+CONFIG_AR531X=y
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_HYDROGEN3 is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_COGENT_CSB250 is not set
+# CONFIG_BAGET_MIPS is not set
+# CONFIG_CASIO_E55 is not set
+# CONFIG_MIPS_COBALT is not set
+# CONFIG_DECSTATION is not set
+# CONFIG_MIPS_EV64120 is not set
+# CONFIG_MIPS_EV96100 is not set
+# CONFIG_MIPS_IVR is not set
+# CONFIG_HP_LASERJET is not set
+# CONFIG_IBM_WORKPAD is not set
+# CONFIG_LASAT is not set
+# CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MIPS_ATLAS is not set
+# CONFIG_MIPS_MAGNUM_4000 is not set
+# CONFIG_MIPS_MALTA is not set
+# CONFIG_MIPS_SEAD is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
+# CONFIG_PMC_BIG_SUR is not set
+# CONFIG_PMC_STRETCH is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_DDB5074 is not set
+# CONFIG_DDB5476 is not set
+# CONFIG_DDB5477 is not set
+# CONFIG_NEC_OSPREY is not set
+# CONFIG_NEC_EAGLE is not set
+# CONFIG_OLIVETTI_M700 is not set
+# CONFIG_NINO is not set
+# CONFIG_SGI_IP22 is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TANBAC_TB0226 is not set
+# CONFIG_TANBAC_TB0229 is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_VICTOR_MPC30X is not set
+# CONFIG_ZAO_CAPCELLA is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+CONFIG_CPU_VR41XX=y
+CONFIG_IRQ_CPU=y
+CONFIG_SERIAL=y
+CONFIG_NEW_IRQ=y
+CONFIG_NEW_TIME_C=y
+CONFIG_NONCOHERENT_IO=y
+CONFIG_EARLY_PRINTK_HACK=y
+# CONFIG_SCSI is not set
+
+#
+# Board selection
+#
+# CONFIG_APUNKNOWN is not set
+CONFIG_AP30=y
+# CONFIG_AP31 is not set
+# CONFIG_AP33 is not set
+# CONFIG_AP38 is not set
+# CONFIG_AP43 is not set
+# CONFIG_AP48 is not set
+CONFIG_MTD_PHYSMAP_BUSWIDTH=2
+# CONFIG_MIPS_AU1000 is not set
+
+#
+# CPU selection
+#
+# CONFIG_CPU_MIPS32 is not set
+# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_R3000 is not set
+# CONFIG_CPU_TX39XX is not set
+CONFIG_CPU_VR41XX=y
+# CONFIG_CPU_R4300 is not set
+# CONFIG_CPU_R4X00 is not set
+# CONFIG_CPU_TX49XX is not set
+# CONFIG_CPU_R5000 is not set
+# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R6000 is not set
+# CONFIG_CPU_NEVADA is not set
+# CONFIG_CPU_R8000 is not set
+# CONFIG_CPU_R10000 is not set
+# CONFIG_CPU_RM7000 is not set
+# CONFIG_CPU_RM9000 is not set
+# CONFIG_CPU_SB1 is not set
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_CPU_ADVANCED is not set
+# CONFIG_CPU_HAS_LLSC is not set
+# CONFIG_CPU_HAS_LLDSCD is not set
+# CONFIG_CPU_HAS_WB is not set
+CONFIG_CPU_HAS_SYNC=y
+
+#
+# General setup
+#
+# CONFIG_CPU_LITTLE_ENDIAN is not set
+# CONFIG_BUILD_ELF64 is not set
+# CONFIG_BINFMT_IRIX is not set
+CONFIG_NET=y
+# CONFIG_PCI is not set
+# CONFIG_PCI_NEW is not set
+CONFIG_PCI_AUTO=y
+# CONFIG_ISA is not set
+# CONFIG_TC is not set
+# CONFIG_MCA is not set
+# CONFIG_SBUS is not set
+# CONFIG_HOTPLUG is not set
+# CONFIG_PCMCIA is not set
+# CONFIG_HOTPLUG_PCI is not set
+CONFIG_SYSVIPC=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+CONFIG_KCORE_ELF=y
+# CONFIG_KCORE_AOUT is not set
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_ELF_AOUT is not set
+# CONFIG_MIPS32_COMPAT is not set
+# CONFIG_MIPS32_O32 is not set
+# CONFIG_MIPS32_N32 is not set
+# CONFIG_BINFMT_ELF32 is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_OOM_KILLER is not set
+# CONFIG_CMDLINE_BOOL is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_REDBOOT_PARTS=y
+# CONFIG_MTD_CMDLINE_PARTS is not set
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+# CONFIG_MTD_CFI_B1 is not set
+CONFIG_MTD_CFI_B2=y
+# CONFIG_MTD_CFI_B4 is not set
+# CONFIG_MTD_CFI_B8 is not set
+CONFIG_MTD_CFI_I1=y
+# CONFIG_MTD_CFI_I2 is not set
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_SSTSTD=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+CONFIG_MTD_OBSOLETE_CHIPS=y
+CONFIG_MTD_AMDSTD=y
+# CONFIG_MTD_SHARP is not set
+CONFIG_MTD_JEDEC=y
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0xbe000000
+CONFIG_MTD_PHYSMAP_LEN=0x800000
+CONFIG_MTD_PHYSMAP_BUSWIDTH=1
+# CONFIG_MTD_PB1000 is not set
+# CONFIG_MTD_PB1500 is not set
+# CONFIG_MTD_PB1100 is not set
+# CONFIG_MTD_BOSPORUS is not set
+# CONFIG_MTD_XXS1500 is not set
+# CONFIG_MTD_MTX1 is not set
+# CONFIG_MTD_DB1X00 is not set
+# CONFIG_MTD_PB1550 is not set
+# CONFIG_MTD_HYDROGEN3 is not set
+# CONFIG_MTD_MIRAGE is not set
+# CONFIG_MTD_CSTM_MIPS_IXX is not set
+# CONFIG_MTD_OCELOT is not set
+# CONFIG_MTD_LASAT is not set
+# CONFIG_MTD_PCI is not set
+# CONFIG_MTD_PCMCIA is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLKMTD is not set
+# CONFIG_MTD_DOC1000 is not set
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOCPROBE is not set
+
+#
+# NAND Flash Device Drivers
+#
+# CONFIG_MTD_NAND is not set
+
+#
+# Parallel port support
+#
+CONFIG_PARPORT=m
+# CONFIG_PARPORT_PC is not set
+# CONFIG_PARPORT_AMIGA is not set
+# CONFIG_PARPORT_MFC3 is not set
+# CONFIG_PARPORT_ATARI is not set
+# CONFIG_PARPORT_GSC is not set
+# CONFIG_PARPORT_SUNBPP is not set
+# CONFIG_PARPORT_IP22 is not set
+# CONFIG_PARPORT_OTHER is not set
+# CONFIG_PARPORT_1284 is not set
+
+#
+# Plug and Play configuration
+#
+# CONFIG_PNP is not set
+# CONFIG_ISAPNP is not set
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_DEV_XD is not set
+# CONFIG_PARIDE is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_CISS_SCSI_TAPE is not set
+# CONFIG_CISS_MONITOR_THREAD is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_NBD=m
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_BLK_STATS is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+# CONFIG_BLK_DEV_MD is not set
+# CONFIG_MD_LINEAR is not set
+# CONFIG_MD_RAID0 is not set
+# CONFIG_MD_RAID1 is not set
+# CONFIG_MD_RAID5 is not set
+# CONFIG_MD_MULTIPATH is not set
+# CONFIG_BLK_DEV_LVM is not set
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_NETLINK_DEV=m
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_FILTER=y
+CONFIG_RING=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_FWMARK=y
+CONFIG_IP_ROUTE_NAT=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_TOS=y
+# CONFIG_IP_ROUTE_VERBOSE is not set
+# CONFIG_IP_PNP is not set
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE=m
+# CONFIG_NET_IPGRE_BROADCAST is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_INET_ECN is not set
+# CONFIG_SYN_COOKIES is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_IP_NF_CONNTRACK=y
+CONFIG_IP_NF_CONNTRACK_MARK=y
+CONFIG_IP_NF_FTP=y
+CONFIG_IP_NF_AMANDA=m
+CONFIG_IP_NF_TFTP=m
+CONFIG_IP_NF_IRC=y
+CONFIG_IP_NF_CT_ACCT=m
+CONFIG_IP_NF_MATCH_CONNBYTES=m
+CONFIG_IP_NF_CT_PROTO_GRE=m
+CONFIG_IP_NF_PPTP=m
+CONFIG_IP_NF_SIP=m
+CONFIG_IP_NF_H323=m
+CONFIG_IP_NF_MMS=m
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=y
+CONFIG_IP_NF_MATCH_LIMIT=m
+CONFIG_IP_NF_MATCH_QUOTA=m
+CONFIG_IP_NF_SET=m
+CONFIG_IP_NF_SET_MAX=256
+CONFIG_IP_NF_SET_HASHSIZE=1024
+CONFIG_IP_NF_MATCH_SET=m
+CONFIG_IP_NF_TARGET_SET=m
+CONFIG_IP_NF_SET_IPMAP=m
+CONFIG_IP_NF_SET_PORTMAP=m
+CONFIG_IP_NF_SET_MACIPMAP=m
+CONFIG_IP_NF_SET_IPHASH=m
+CONFIG_IP_NF_SET_NETHASH=m
+CONFIG_IP_NF_SET_IPTREE=m
+CONFIG_IP_NF_MATCH_MAC=m
+CONFIG_IP_NF_MATCH_PKTTYPE=m
+CONFIG_IP_NF_MATCH_MARK=y
+CONFIG_IP_NF_MATCH_MULTIPORT=y
+CONFIG_IP_NF_MATCH_TOS=m
+CONFIG_IP_NF_MATCH_CONDITION=m
+CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_IPP2P=m
+CONFIG_IP_NF_MATCH_DSCP=m
+CONFIG_IP_NF_MATCH_AH_ESP=m
+CONFIG_IP_NF_MATCH_LENGTH=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_MATCH_TCPMSS=m
+CONFIG_IP_NF_MATCH_HELPER=m
+CONFIG_IP_NF_MATCH_STATE=y
+CONFIG_IP_NF_MATCH_CONNTRACK=m
+CONFIG_IP_NF_MATCH_CONNMARK=m
+CONFIG_IP_NF_MATCH_UNCLEAN=m
+CONFIG_IP_NF_MATCH_STRING=m
+CONFIG_IP_NF_MATCH_OWNER=m
+CONFIG_IP_NF_MATCH_LAYER7=m
+# CONFIG_IP_NF_MATCH_LAYER7_DEBUG is not set
+CONFIG_IP_NF_MATCH_LAYER7_MAXDATALEN=2048
+CONFIG_IP_NF_FILTER=y
+CONFIG_IP_NF_TARGET_REJECT=y
+CONFIG_IP_NF_TARGET_MIRROR=m
+CONFIG_IP_NF_NAT=y
+CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=y
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_NAT_PPTP=m
+CONFIG_IP_NF_NAT_PROTO_GRE=m
+CONFIG_IP_NF_NAT_SIP=m
+CONFIG_IP_NF_NAT_H323=m
+CONFIG_IP_NF_NAT_MMS=m
+CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_IP_NF_NAT_SNMP_BASIC=m
+CONFIG_IP_NF_NAT_IRC=y
+CONFIG_IP_NF_NAT_FTP=y
+CONFIG_IP_NF_NAT_TFTP=m
+CONFIG_IP_NF_MANGLE=y
+CONFIG_IP_NF_TARGET_TOS=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_DSCP=m
+CONFIG_IP_NF_TARGET_MARK=y
+CONFIG_IP_NF_TARGET_IMQ=m
+CONFIG_IP_NF_TARGET_CONNMARK=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_IP_NF_TARGET_TCPMSS=y
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IP: Virtual Server Configuration
+#
+CONFIG_IP_VS=m
+# CONFIG_IP_VS_DEBUG is not set
+CONFIG_IP_VS_TAB_BITS=12
+CONFIG_IP_VS_RR=m
+CONFIG_IP_VS_WRR=m
+CONFIG_IP_VS_LC=m
+CONFIG_IP_VS_WLC=m
+CONFIG_IP_VS_LBLC=m
+CONFIG_IP_VS_LBLCR=m
+CONFIG_IP_VS_DH=m
+CONFIG_IP_VS_SH=m
+CONFIG_IP_VS_SED=m
+CONFIG_IP_VS_NQ=m
+CONFIG_IP_VS_FTP=m
+CONFIG_IPV6=m
+
+#
+# IPv6: Netfilter Configuration
+#
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_LIMIT=m
+CONFIG_IP6_NF_MATCH_CONDITION=m
+CONFIG_IP6_NF_MATCH_MAC=m
+# CONFIG_IP6_NF_MATCH_RT is not set
+# CONFIG_IP6_NF_MATCH_OPTS is not set
+# CONFIG_IP6_NF_MATCH_FRAG is not set
+# CONFIG_IP6_NF_MATCH_HL is not set
+CONFIG_IP6_NF_MATCH_MULTIPORT=m
+CONFIG_IP6_NF_MATCH_OWNER=m
+CONFIG_IP6_NF_MATCH_MARK=m
+# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set
+# CONFIG_IP6_NF_MATCH_AHESP is not set
+CONFIG_IP6_NF_MATCH_LENGTH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_TARGET_MARK=m
+CONFIG_IP6_NF_TARGET_IMQ=m
+# CONFIG_KHTTPD is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+CONFIG_VLAN_8021Q=y
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_DECNET is not set
+CONFIG_BRIDGE=y
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_LLC is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+CONFIG_WAN_ROUTER=m
+# CONFIG_NET_FASTROUTE is not set
+# CONFIG_NET_HW_FLOWCONTROL is not set
+
+#
+# QoS and/or fair queueing
+#
+CONFIG_NET_SCHED=y
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+CONFIG_NET_SCH_CSZ=m
+CONFIG_NET_SCH_HFSC=m
+CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+# CONFIG_NET_SCH_NETEM is not set
+CONFIG_NET_SCH_DSMARK=m
+CONFIG_NET_SCH_INGRESS=m
+CONFIG_NET_QOS=y
+CONFIG_NET_ESTIMATOR=y
+CONFIG_NET_CLS=y
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_ROUTE=y
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+CONFIG_NET_CLS_POLICE=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+CONFIG_IPSEC_NAT_TRAVERSAL=y
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+# CONFIG_PHONE_IXJ is not set
+# CONFIG_PHONE_IXJ_PCMCIA is not set
+
+#
+# ATA/IDE/MFM/RLL support
+#
+CONFIG_IDE=m
+
+#
+# IDE, ATA and ATAPI Block devices
+#
+CONFIG_BLK_DEV_IDE=m
+# CONFIG_BLK_DEV_HD_IDE is not set
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=m
+# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_IDEDISK_STROKE=y
+# CONFIG_BLK_DEV_IDECS is not set
+# CONFIG_BLK_DEV_DELKIN is not set
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+# CONFIG_BLK_DEV_CMD640 is not set
+# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
+# CONFIG_BLK_DEV_ISAPNP is not set
+# CONFIG_IDE_CHIPSETS is not set
+# CONFIG_IDEDMA_AUTO is not set
+# CONFIG_DMA_NONPCI is not set
+# CONFIG_BLK_DEV_ATARAID is not set
+# CONFIG_BLK_DEV_ATARAID_PDC is not set
+# CONFIG_BLK_DEV_ATARAID_HPT is not set
+# CONFIG_BLK_DEV_ATARAID_MEDLEY is not set
+# CONFIG_BLK_DEV_ATARAID_SII is not set
+
+#
+# SCSI support
+#
+# CONFIG_SCSI is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_BOOT is not set
+# CONFIG_FUSION_ISENSE is not set
+# CONFIG_FUSION_CTL is not set
+# CONFIG_FUSION_LAN is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_IMQ=m
+CONFIG_TUN=m
+CONFIG_NET_RANDOM=y
+# CONFIG_ETHERTAP is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+# CONFIG_VENETDEV is not set
+CONFIG_MARVELL_ENET_PHY=y
+# CONFIG_SUNLANCE is not set
+# CONFIG_SUNBMAC is not set
+# CONFIG_SUNQE is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_LANCE is not set
+# CONFIG_NET_VENDOR_SMC is not set
+# CONFIG_NET_VENDOR_RACAL is not set
+# CONFIG_NET_ISA is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_NET_POCKET is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_MYRI_SBUS is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PLIP is not set
+CONFIG_PPP=m
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=m
+# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE_MPPC=m
+CONFIG_PPPOE=m
+# CONFIG_SLIP is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+CONFIG_NET_RADIO=y
+# CONFIG_STRIP is not set
+# CONFIG_WAVELAN is not set
+# CONFIG_ARLAN is not set
+# CONFIG_AIRONET4500 is not set
+# CONFIG_AIRONET4500_NONCS is not set
+# CONFIG_AIRONET4500_PROC is not set
+# CONFIG_HERMES is not set
+# CONFIG_PRISM54 is not set
+CONFIG_NET_WIRELESS=y
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+# CONFIG_NET_FC is not set
+# CONFIG_RCPCI is not set
+CONFIG_SHAPER=m
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+
+#
+# Amateur Radio support
+#
+CONFIG_HAMRADIO=y
+CONFIG_AX25=m
+# CONFIG_AX25_DAMA_SLAVE is not set
+# CONFIG_NETROM is not set
+# CONFIG_ROSE is not set
+
+#
+# AX.25 network device drivers
+#
+CONFIG_MKISS=m
+# CONFIG_6PACK is not set
+# CONFIG_BPQETHER is not set
+# CONFIG_SCC_DELAY is not set
+# CONFIG_SCC_TRXECHO is not set
+# CONFIG_BAYCOM_SER_FDX is not set
+# CONFIG_BAYCOM_SER_HDX is not set
+# CONFIG_BAYCOM_PAR is not set
+# CONFIG_BAYCOM_EPP is not set
+# CONFIG_SOUNDMODEM is not set
+# CONFIG_YAM is not set
+
+#
+# IrDA (infrared) support
+#
+# CONFIG_IRDA is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input core support
+#
+# CONFIG_INPUT is not set
+# CONFIG_INPUT_KEYBDEV is not set
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_UINPUT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+CONFIG_SERIAL=y
+CONFIG_SERIAL_CONSOLE=y
+# CONFIG_SERIAL_EXTENDED is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_VR41XX_KIU is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_UNIX98_PTY_COUNT=128
+CONFIG_PRINTER=m
+# CONFIG_LP_CONSOLE is not set
+CONFIG_PPDEV=m
+# CONFIG_TIPAR is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# Mice
+#
+# CONFIG_BUSMOUSE is not set
+# CONFIG_MOUSE is not set
+
+#
+# Joysticks
+#
+# CONFIG_INPUT_GAMEPORT is not set
+# CONFIG_QIC02_TAPE is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_IPMI_PANIC_EVENT is not set
+# CONFIG_IPMI_DEVICE_INTERFACE is not set
+# CONFIG_IPMI_KCS is not set
+# CONFIG_IPMI_WATCHDOG is not set
+
+#
+# Watchdog Cards
+#
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+# CONFIG_ACQUIRE_WDT is not set
+# CONFIG_ADVANTECH_WDT is not set
+# CONFIG_ALIM1535_WDT is not set
+# CONFIG_ALIM7101_WDT is not set
+# CONFIG_SC520_WDT is not set
+# CONFIG_PCWATCHDOG is not set
+# CONFIG_EUROTECH_WDT is not set
+# CONFIG_IB700_WDT is not set
+# CONFIG_WAFER_WDT is not set
+# CONFIG_I810_TCO is not set
+# CONFIG_MIXCOMWD is not set
+# CONFIG_60XX_WDT is not set
+# CONFIG_SC1200_WDT is not set
+# CONFIG_SCx200_WDT is not set
+CONFIG_SOFT_WATCHDOG=y
+# CONFIG_W83877F_WDT is not set
+# CONFIG_WDT is not set
+# CONFIG_WDTPCI is not set
+# CONFIG_MACHZ_WDT is not set
+# CONFIG_SCx200 is not set
+# CONFIG_SCx200_GPIO is not set
+# CONFIG_AMD_PM768 is not set
+# CONFIG_NVRAM is not set
+# CONFIG_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_FTAPE is not set
+# CONFIG_AGP is not set
+
+#
+# Direct Rendering Manager (XFree86 DRI support)
+#
+# CONFIG_DRM is not set
+
+#
+# File systems
+#
+# CONFIG_QUOTA is not set
+# CONFIG_QFMT_V2 is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+# CONFIG_ADFS_FS is not set
+# CONFIG_ADFS_FS_RW is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+CONFIG_HFSPLUS_FS=m
+# CONFIG_BEFS_FS is not set
+# CONFIG_BEFS_DEBUG is not set
+# CONFIG_BFS_FS is not set
+CONFIG_EXT3_FS=m
+CONFIG_JBD=m
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FAT_FS=m
+# CONFIG_MSDOS_FS is not set
+# CONFIG_UMSDOS_FS is not set
+CONFIG_VFAT_FS=m
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+# CONFIG_JFFS2_BBC_ARMLIB is not set
+# CONFIG_JFFS2_BBC_LZO is not set
+CONFIG_JFFS2_BBC_LZARI=y
+# CONFIG_JFFS2_BBC_LZHD is not set
+# CONFIG_JFFS2_BBC_LZSS is not set
+# CONFIG_CRAMFS is not set
+CONFIG_SQUASHFS=y
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_TMPFS=y
+CONFIG_RAMFS=y
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+# CONFIG_ZISOFS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_JFS_DEBUG is not set
+# CONFIG_JFS_STATISTICS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_NTFS_FS is not set
+# CONFIG_NTFS_RW is not set
+# CONFIG_HPFS_FS is not set
+CONFIG_PROC_FS=y
+CONFIG_DEVFS_FS=y
+CONFIG_DEVFS_MOUNT=y
+# CONFIG_DEVFS_DEBUG is not set
+CONFIG_DEVPTS_FS=y
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_QNX4FS_RW is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_EXT2_FS=m
+# CONFIG_SYSV_FS is not set
+# CONFIG_UDF_FS is not set
+# CONFIG_UDF_RW is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_UFS_FS_WRITE is not set
+CONFIG_XFS_FS=m
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_TRACE is not set
+# CONFIG_XFS_DEBUG is not set
+
+#
+# Network File Systems
+#
+# CONFIG_CODA_FS is not set
+# CONFIG_INTERMEZZO_FS is not set
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_ROOT_NFS is not set
+# CONFIG_NFSD is not set
+# CONFIG_NFSD_V3 is not set
+# CONFIG_NFSD_TCP is not set
+CONFIG_SUNRPC=m
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+CONFIG_CIFS_POSIX=y
+# CONFIG_SMB_FS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_NCPFS_PACKET_SIGNING is not set
+# CONFIG_NCPFS_IOCTL_LOCKING is not set
+# CONFIG_NCPFS_STRONG is not set
+# CONFIG_NCPFS_NFS_NS is not set
+# CONFIG_NCPFS_OS2_NS is not set
+# CONFIG_NCPFS_SMALLDOS is not set
+# CONFIG_NCPFS_NLS is not set
+# CONFIG_NCPFS_EXTRAS is not set
+# CONFIG_ZISOFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+CONFIG_MAC_PARTITION=y
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SMB_NLS is not set
+CONFIG_NLS=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Multimedia devices
+#
+CONFIG_VIDEO_DEV=m
+
+#
+# Video For Linux
+#
+CONFIG_VIDEO_PROC_FS=y
+# CONFIG_I2C_PARPORT is not set
+# CONFIG_VIDEO_BT848 is not set
+# CONFIG_VIDEO_PMS is not set
+# CONFIG_VIDEO_BWQCAM is not set
+# CONFIG_VIDEO_CQCAM is not set
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_SAA5249 is not set
+# CONFIG_TUNER_3036 is not set
+# CONFIG_VIDEO_STRADIS is not set
+# CONFIG_VIDEO_ZORAN is not set
+# CONFIG_VIDEO_ZORAN_BUZ is not set
+# CONFIG_VIDEO_ZORAN_DC10 is not set
+# CONFIG_VIDEO_ZORAN_LML33 is not set
+# CONFIG_VIDEO_ZR36120 is not set
+# CONFIG_VIDEO_MEYE is not set
+
+#
+# Radio Adapters
+#
+# CONFIG_RADIO_GEMTEK_PCI is not set
+# CONFIG_RADIO_MAXIRADIO is not set
+# CONFIG_RADIO_MAESTRO is not set
+# CONFIG_RADIO_MIROPCM20 is not set
+
+#
+# Sound
+#
+CONFIG_SOUND=m
+# CONFIG_SOUND_ALI5455 is not set
+# CONFIG_SOUND_BT878 is not set
+# CONFIG_SOUND_CMPCI is not set
+# CONFIG_SOUND_EMU10K1 is not set
+# CONFIG_MIDI_EMU10K1 is not set
+# CONFIG_SOUND_FUSION is not set
+# CONFIG_SOUND_CS4281 is not set
+# CONFIG_SOUND_ES1370 is not set
+# CONFIG_SOUND_ES1371 is not set
+# CONFIG_SOUND_ESSSOLO1 is not set
+# CONFIG_SOUND_MAESTRO is not set
+# CONFIG_SOUND_MAESTRO3 is not set
+# CONFIG_SOUND_FORTE is not set
+# CONFIG_SOUND_ICH is not set
+# CONFIG_SOUND_RME96XX is not set
+# CONFIG_SOUND_SONICVIBES is not set
+# CONFIG_SOUND_TRIDENT is not set
+# CONFIG_SOUND_MSNDCLAS is not set
+# CONFIG_SOUND_MSNDPIN is not set
+# CONFIG_SOUND_VIA82CXXX is not set
+# CONFIG_MIDI_VIA82CXXX is not set
+# CONFIG_SOUND_OSS is not set
+# CONFIG_SOUND_TVMIXER is not set
+# CONFIG_SOUND_AD1980 is not set
+# CONFIG_SOUND_WM97XX is not set
+
+#
+# USB support
+#
+# CONFIG_USB is not set
+
+#
+# Support for USB gadgets
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# Bluetooth support
+#
+CONFIG_BLUEZ=m
+CONFIG_BLUEZ_L2CAP=m
+CONFIG_BLUEZ_SCO=m
+CONFIG_BLUEZ_RFCOMM=m
+CONFIG_BLUEZ_RFCOMM_TTY=y
+CONFIG_BLUEZ_BNEP=m
+CONFIG_BLUEZ_BNEP_MC_FILTER=y
+CONFIG_BLUEZ_BNEP_PROTO_FILTER=y
+
+#
+# Bluetooth device drivers
+#
+# CONFIG_BLUEZ_HCIUSB is not set
+CONFIG_BLUEZ_HCIUART=m
+CONFIG_BLUEZ_HCIUART_H4=y
+CONFIG_BLUEZ_HCIUART_BCSP=y
+CONFIG_BLUEZ_HCIUART_BCSP_TXCRC=y
+# CONFIG_BLUEZ_HCIBFUSB is not set
+# CONFIG_BLUEZ_HCIDTL1 is not set
+# CONFIG_BLUEZ_HCIBT3C is not set
+# CONFIG_BLUEZ_HCIBLUECARD is not set
+# CONFIG_BLUEZ_HCIBTUART is not set
+# CONFIG_BLUEZ_HCIVHCI is not set
+
+#
+# Kernel hacking
+#
+CONFIG_CROSSCOMPILE=y
+# CONFIG_RUNTIME_DEBUG is not set
+# CONFIG_KGDB is not set
+# CONFIG_GDB_CONSOLE is not set
+# CONFIG_DEBUG_INFO is not set
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_MIPS_UNCACHED is not set
+CONFIG_LOG_BUF_SHIFT=0
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+CONFIG_CRYPTO_DES=m
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+CONFIG_CRYPTO_AES=m
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Library routines
+#
+# CONFIG_CRC32 is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
diff --git a/openwrt/target/linux/linux-2.4/patches/ar531x/000-atheros-support.patch b/openwrt/target/linux/linux-2.4/patches/ar531x/000-atheros-support.patch
new file mode 100644
index 000000000..1ec012f63
--- /dev/null
+++ b/openwrt/target/linux/linux-2.4/patches/ar531x/000-atheros-support.patch
@@ -0,0 +1,2642 @@
+diff -urN linux-2.4.32/arch/mips/ar531x/ar531xdbg_io.c linux-2.4.32.new/arch/mips/ar531x/ar531xdbg_io.c
+--- linux-2.4.32/arch/mips/ar531x/ar531xdbg_io.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.4.32.new/arch/mips/ar531x/ar531xdbg_io.c 2005-12-24 20:29:42.102311328 +0000
+@@ -0,0 +1,217 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License. See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright MontaVista Software Inc
++ * Copyright © 2003 Atheros Communications, Inc., All Rights Reserved.
++ */
++
++/*
++ * Basic support for polled character input/output
++ * using the AR531X's serial port.
++ */
++
++#include <linux/config.h>
++#include <linux/init.h>
++#include <linux/delay.h>
++#include <linux/irq.h>
++#include <linux/interrupt.h>
++#include <linux/serial.h>
++#include <linux/types.h>
++#include <linux/string.h>
++
++#include <asm/reboot.h>
++#include <asm/io.h>
++#include <asm/time.h>
++#include <asm/pgtable.h>
++#include <asm/processor.h>
++#include <asm/reboot.h>
++#include <asm/system.h>
++#include <asm/serial.h>
++#include <asm/gdb-stub.h>
++
++#include "ar531xlnx.h"
++
++#if CONFIG_EARLY_PRINTK_HACK || CONFIG_KGDB
++/* base addr of uart and clock timing */
++#define BASE 0xbc000003
++
++/* distance in bytes between two serial registers */
++#define REG_OFFSET 4
++
++/*
++ * 0 - we need to do serial init
++ * 1 - skip serial init
++ */
++static int serialPortInitialized = 0;
++
++/*
++ * * the default baud rate *if* we do serial init
++ * */
++#define BAUD_DEFAULT UART16550_BAUD_9600
++
++/* === END OF CONFIG === */
++
++#define UART16550_BAUD_2400 2400
++#define UART16550_BAUD_4800 4800
++#define UART16550_BAUD_9600 9600
++#define UART16550_BAUD_19200 19200
++#define UART16550_BAUD_38400 38400
++#define UART16550_BAUD_57600 57600
++#define UART16550_BAUD_115200 115200
++
++#define UART16550_PARITY_NONE 0
++#define UART16550_PARITY_ODD 0x08
++#define UART16550_PARITY_EVEN 0x18
++#define UART16550_PARITY_MARK 0x28
++#define UART16550_PARITY_SPACE 0x38
++
++#define UART16550_DATA_5BIT 0x0
++#define UART16550_DATA_6BIT 0x1
++#define UART16550_DATA_7BIT 0x2
++#define UART16550_DATA_8BIT 0x3
++
++#define UART16550_STOP_1BIT 0x0
++#define UART16550_STOP_2BIT 0x4
++
++/* register offset */
++#define OFS_RCV_BUFFER (0*REG_OFFSET)
++#define OFS_TRANS_HOLD (0*REG_OFFSET)
++#define OFS_SEND_BUFFER (0*REG_OFFSET)
++#define OFS_INTR_ENABLE (1*REG_OFFSET)
++#define OFS_INTR_ID (2*REG_OFFSET)
++#define OFS_DATA_FORMAT (3*REG_OFFSET)
++#define OFS_LINE_CONTROL (3*REG_OFFSET)
++#define OFS_MODEM_CONTROL (4*REG_OFFSET)
++#define OFS_RS232_OUTPUT (4*REG_OFFSET)
++#define OFS_LINE_STATUS (5*REG_OFFSET)
++#define OFS_MODEM_STATUS (6*REG_OFFSET)
++#define OFS_RS232_INPUT (6*REG_OFFSET)
++#define OFS_SCRATCH_PAD (7*REG_OFFSET)
++
++#define OFS_DIVISOR_LSB (0*REG_OFFSET)
++#define OFS_DIVISOR_MSB (1*REG_OFFSET)
++
++
++/* memory-mapped read/write of the port */
++#define UART16550_READ(y) (*((volatile u8*)(BASE + y)))
++#define UART16550_WRITE(y, z) ((*((volatile u8*)(BASE + y))) = z)
++
++void
++debugPortInit(u32 baud, u8 data, u8 parity, u8 stop)
++{
++ /* Pull UART out of reset */
++ sysRegWrite(AR531X_RESET,
++ sysRegRead(AR531X_RESET) & ~(AR531X_RESET_UART0));
++
++ /* disable interrupts */
++ UART16550_WRITE(OFS_LINE_CONTROL, 0x0);
++ UART16550_WRITE(OFS_INTR_ENABLE, 0);
++
++ /* set up buad rate */
++ {
++ u32 divisor;
++ u32 uart_clock_rate = ar531x_cpu_frequency() / 4;
++ u32 base_baud = uart_clock_rate / 16;
++
++ /* set DIAB bit */
++ UART16550_WRITE(OFS_LINE_CONTROL, 0x80);
++
++ /* set divisor */
++ divisor = base_baud / baud;
++ UART16550_WRITE(OFS_DIVISOR_LSB, divisor & 0xff);
++ UART16550_WRITE(OFS_DIVISOR_MSB, (divisor & 0xff00)>>8);
++
++ /* clear DIAB bit */
++ UART16550_WRITE(OFS_LINE_CONTROL, 0x0);
++ }
++
++ /* set data format */
++ UART16550_WRITE(OFS_DATA_FORMAT, data | parity | stop);
++}
++
++u8
++getDebugChar(void)
++{
++ if (!serialPortInitialized) {
++ serialPortInitialized = 1;
++ debugPortInit(BAUD_DEFAULT,
++ UART16550_DATA_8BIT,
++ UART16550_PARITY_NONE, UART16550_STOP_1BIT);
++ }
++
++ while((UART16550_READ(OFS_LINE_STATUS) & 0x1) == 0);
++ return UART16550_READ(OFS_RCV_BUFFER);
++}
++
++#if CONFIG_KGDB
++/*
++ * Peek at the most recently received character.
++ * Don't wait for a new character to be received.
++ */
++u8
++peekDebugChar(void)
++{
++ return UART16550_READ(OFS_RCV_BUFFER);
++}
++
++static int kgdbInitialized = 0;
++
++void
++kgdbInit(void)
++{
++ sysRegWrite(AR531X_WD_CTRL, AR531X_WD_CTRL_IGNORE_EXPIRATION);
++
++ if (!kgdbInitialized) {
++ printk("Setting debug traps - please connect the remote debugger.\n");
++ set_debug_traps();
++ kgdbInitialized = 1;
++ }
++ breakpoint();
++}
++
++int
++kgdbEnabled(void)
++{
++ return kgdbInitialized;
++}
++
++#define DEBUG_CHAR '\001';
++
++int
++kgdbInterrupt(void)
++{
++ if (!kgdbInitialized) {
++ return 0;
++ }
++
++ /*
++ * Try to avoid swallowing too much input: Only consume
++ * a character if nothing new has arrived. Yes, there's
++ * still a small hole here, and we may lose an input
++ * character now and then.
++ */
++ if (UART16550_READ(OFS_LINE_STATUS) & 1) {
++ return 0;
++ } else {
++ return UART16550_READ(OFS_RCV_BUFFER) == DEBUG_CHAR;
++ }
++}
++#endif
++
++
++void
++putDebugChar(char byte)
++{
++ if (!serialPortInitialized) {
++ serialPortInitialized = 1;
++ debugPortInit(BAUD_DEFAULT,
++ UART16550_DATA_8BIT,
++ UART16550_PARITY_NONE, UART16550_STOP_1BIT);
++ }
++
++ while ((UART16550_READ(OFS_LINE_STATUS) &0x20) == 0);
++ UART16550_WRITE(OFS_SEND_BUFFER, byte);
++ }
++#endif /* CONFIG_EARLY_PRINTK_HACK || CONFIG_KGDB */
+diff -urN linux-2.4.32/arch/mips/ar531x/ar531xgpio.c linux-2.4.32.new/arch/mips/ar531x/ar531xgpio.c
+--- linux-2.4.32/arch/mips/ar531x/ar531xgpio.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.4.32.new/arch/mips/ar531x/ar531xgpio.c 2005-12-24 20:29:42.102311328 +0000
+@@ -0,0 +1,141 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License. See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright © 2003 Atheros Communications, Inc., All Rights Reserved.
++ */
++
++/*
++ * Support for GPIO -- General Purpose Input/Output Pins
++ */
++
++#include <linux/config.h>
++#include <linux/kernel.h>
++#include <linux/signal.h>
++#include <linux/interrupt.h>
++#include <linux/irq.h>
++
++#include "ar531xlnx.h"
++
++/* GPIO Interrupt Support */
++
++/* Turn on the specified AR531X_GPIO_IRQ interrupt */
++static unsigned int
++ar531x_gpio_intr_startup(unsigned int irq)
++{
++ ar531x_gpio_intr_enable(irq);
++ return 0;
++}
++
++/* Turn off the specified AR531X_GPIO_IRQ interrupt */
++static void
++ar531x_gpio_intr_shutdown(unsigned int irq)
++{
++ ar531x_gpio_intr_disable(irq);
++}
++
++u32 gpioIntMask = 0;
++
++/* Enable the specified AR531X_GPIO_IRQ interrupt */
++void
++ar531x_gpio_intr_enable(unsigned int irq)
++{
++ u32 reg;
++ int gpio;
++
++ gpio = irq - AR531X_GPIO_IRQ_BASE;
++ gpioIntMask |= gpio;
++
++ reg = sysRegRead(AR531X_GPIO_CR);
++ reg &= ~(GPIO_CR_M(gpio) | GPIO_CR_UART(gpio) | GPIO_CR_INT(gpio));
++ reg |= GPIO_CR_I(gpio);
++ reg |= GPIO_CR_INT(gpio);
++
++ sysRegWrite(AR531X_GPIO_CR, reg);
++ (void)sysRegRead(AR531X_GPIO_CR); /* flush to hardware */
++}
++
++/* Disable the specified AR531X_GPIO_IRQ interrupt */
++void
++ar531x_gpio_intr_disable(unsigned int irq)
++{
++ u32 reg;
++ int gpio;
++
++ gpio = irq - AR531X_GPIO_IRQ_BASE;
++
++ reg = sysRegRead(AR531X_GPIO_CR);
++ reg &= ~(GPIO_CR_M(gpio) | GPIO_CR_UART(gpio) | GPIO_CR_INT(gpio));
++ reg |= GPIO_CR_I(gpio);
++ /* No GPIO_CR_INT bit */
++
++ sysRegWrite(AR531X_GPIO_CR, reg);
++ (void)sysRegRead(AR531X_GPIO_CR); /* flush to hardware */
++
++ gpioIntMask &= ~gpio;
++}
++
++static void
++ar531x_gpio_intr_ack(unsigned int irq)
++{
++ ar531x_gpio_intr_disable(irq);
++}
++
++static void
++ar531x_gpio_intr_end(unsigned int irq)
++{
++ if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
++ ar531x_gpio_intr_enable(irq);
++}
++
++static void
++ar531x_gpio_intr_set_affinity(unsigned int irq, unsigned long mask)
++{
++ /* Only 1 CPU; ignore affinity request */
++}
++
++int ar531x_gpio_irq_base;
++
++struct hw_interrupt_type ar531x_gpio_intr_controller = {
++ "AR531X GPIO",
++ ar531x_gpio_intr_startup,
++ ar531x_gpio_intr_shutdown,
++ ar531x_gpio_intr_enable,
++ ar531x_gpio_intr_disable,
++ ar531x_gpio_intr_ack,
++ ar531x_gpio_intr_end,
++ ar531x_gpio_intr_set_affinity,
++};
++
++void
++ar531x_gpio_intr_init(int irq_base)
++{
++ int i;
++
++ for (i = irq_base; i < irq_base + AR531X_GPIO_IRQ_COUNT; i++) {
++ irq_desc[i].status = IRQ_DISABLED;
++ irq_desc[i].action = NULL;
++ irq_desc[i].depth = 1;
++ irq_desc[i].handler = &ar531x_gpio_intr_controller;
++ }
++
++ ar531x_gpio_irq_base = irq_base;
++}
++
++/* ARGSUSED */
++void
++spurious_gpio_handler(int cpl, void *dev_id, struct pt_regs *regs)
++{
++ u32 gpioDataIn;
++
++ gpioDataIn = sysRegRead(AR531X_GPIO_DI) & gpioIntMask;
++
++ printk("spurious_gpio_handler: 0x%x di=0x%8.8x gpioIntMask=0x%8.8x\n",
++ cpl, gpioDataIn, gpioIntMask);
++}
++
++struct irqaction spurious_gpio =
++ {spurious_gpio_handler, SA_INTERRUPT, 0, "spurious_gpio",
++ NULL, NULL};
++
+diff -urN linux-2.4.32/arch/mips/ar531x/ar531x.h linux-2.4.32.new/arch/mips/ar531x/ar531x.h
+--- linux-2.4.32/arch/mips/ar531x/ar531x.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.4.32.new/arch/mips/ar531x/ar531x.h 2005-12-24 20:29:42.102311328 +0000
+@@ -0,0 +1,280 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License. See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright © 2003 Atheros Communications, Inc., All Rights Reserved.
++ */
++
++#ifndef AR531X_H
++#define AR531X_H 1
++
++#include <asm/addrspace.h>
++
++/* Address Map */
++#define AR531X_WLAN0 0x18000000
++#define AR531X_WLAN1 0x18500000
++#define AR531X_ENET0 0x18100000
++#define AR531X_ENET1 0x18200000
++#define AR531X_SDRAMCTL 0x18300000
++#define AR531X_FLASHCTL 0x18400000
++#define AR531X_APBBASE 0x1c000000
++#define AR531X_FLASH 0x1e000000
++
++/*
++ * AR531X_NUM_ENET_MAC defines the number of ethernet MACs that
++ * should be considered available. The AR5312 supports 2 enet MACS,
++ * even though many reference boards only actually use 1 of them
++ * (i.e. Only MAC 0 is actually connected to an enet PHY or PHY switch.
++ * The AR2312 supports 1 enet MAC.
++ */
++#define AR531X_NUM_ENET_MAC 2
++
++/*
++ * Need these defines to determine true number of ethernet MACs
++ */
++#define AR5212_AR5312_REV2 0x0052 /* AR5312 WMAC (AP31) */
++#define AR5212_AR5312_REV7 0x0057 /* AR5312 WMAC (AP30-040) */
++#define AR5212_AR2313_REV8 0x0058 /* AR2313 WMAC (AP43-030) */
++#define AR531X_RADIO_MASK_OFF 0xc8
++#define AR531X_RADIO0_MASK 0x0003
++#define AR531X_RADIO1_MASK 0x000c
++#define AR531X_RADIO1_S 2
++
++/*
++ * AR531X_NUM_WMAC defines the number of Wireless MACs that\
++ * should be considered available.
++ */
++#define AR531X_NUM_WMAC 2
++
++/* Reset/Timer Block Address Map */
++#define AR531X_RESETTMR (AR531X_APBBASE + 0x3000)
++#define AR531X_TIMER (AR531X_RESETTMR + 0x0000) /* countdown timer */
++#define AR531X_WD_CTRL (AR531X_RESETTMR + 0x0008) /* watchdog cntrl */
++#define AR531X_WD_TIMER (AR531X_RESETTMR + 0x000c) /* watchdog timer */
++#define AR531X_ISR (AR531X_RESETTMR + 0x0010) /* Intr Status Reg */
++#define AR531X_IMR (AR531X_RESETTMR + 0x0014) /* Intr Mask Reg */
++#define AR531X_RESET (AR531X_RESETTMR + 0x0020)
++#define AR5312_CLOCKCTL1 (AR531X_RESETTMR + 0x0064)
++#define AR5312_SCRATCH (AR531X_RESETTMR + 0x006c)
++#define AR531X_PROCADDR (AR531X_RESETTMR + 0x0070)
++#define AR531X_PROC1 (AR531X_RESETTMR + 0x0074)
++#define AR531X_DMAADDR (AR531X_RESETTMR + 0x0078)
++#define AR531X_DMA1 (AR531X_RESETTMR + 0x007c)
++#define AR531X_ENABLE (AR531X_RESETTMR + 0x0080) /* interface enb */
++#define AR531X_REV (AR531X_RESETTMR + 0x0090) /* revision */
++
++/* AR531X_WD_CTRL register bit field definitions */
++#define AR531X_WD_CTRL_IGNORE_EXPIRATION 0x0000
++#define AR531X_WD_CTRL_NMI 0x0001
++#define AR531X_WD_CTRL_RESET 0x0002
++
++/* AR531X_ISR register bit field definitions */
++#define AR531X_ISR_NONE 0x0000
++#define AR531X_ISR_TIMER 0x0001
++#define AR531X_ISR_AHBPROC 0x0002
++#define AR531X_ISR_AHBDMA 0x0004
++#define AR531X_ISR_GPIO 0x0008
++#define AR531X_ISR_UART0 0x0010
++#define AR531X_ISR_UART0DMA 0x0020
++#define AR531X_ISR_WD 0x0040
++#define AR531X_ISR_LOCAL 0x0080
++
++/* AR531X_RESET register bit field definitions */
++#define AR531X_RESET_SYSTEM 0x00000001 /* cold reset full system */
++#define AR531X_RESET_PROC 0x00000002 /* cold reset MIPS core */
++#define AR531X_RESET_WLAN0 0x00000004 /* cold reset WLAN MAC and BB */
++#define AR531X_RESET_EPHY0 0x00000008 /* cold reset ENET0 phy */
++#define AR531X_RESET_EPHY1 0x00000010 /* cold reset ENET1 phy */
++#define AR531X_RESET_ENET0 0x00000020 /* cold reset ENET0 mac */
++#define AR531X_RESET_ENET1 0x00000040 /* cold reset ENET1 mac */
++#define AR531X_RESET_UART0 0x00000100 /* cold reset UART0 (high speed) */
++#define AR531X_RESET_WLAN1 0x00000200 /* cold reset WLAN MAC/BB */
++#define AR531X_RESET_APB 0x00000400 /* cold reset APB (ar5312) */
++#define AR531X_RESET_WARM_PROC 0x00001000 /* warm reset MIPS core */
++#define AR531X_RESET_WARM_WLAN0_MAC 0x00002000 /* warm reset WLAN0 MAC */
++#define AR531X_RESET_WARM_WLAN0_BB 0x00004000 /* warm reset WLAN0 BaseBand */
++#define AR531X_RESET_NMI 0x00010000 /* send an NMI to the processor */
++#define AR531X_RESET_WARM_WLAN1_MAC 0x00020000 /* warm reset WLAN1 mac */
++#define AR531X_RESET_WARM_WLAN1_BB 0x00040000 /* warm reset WLAN1 baseband */
++#define AR531X_RESET_LOCAL_BUS 0x00080000 /* reset local bus */
++#define AR531X_RESET_WDOG 0x00100000 /* last reset was a watchdog */
++
++#define AR531X_RESET_WMAC0_BITS \
++ AR531X_RESET_WLAN0 |\
++ AR531X_RESET_WARM_WLAN0_MAC |\
++ AR531X_RESET_WARM_WLAN0_BB
++
++#define AR531X_RESERT_WMAC1_BITS \
++ AR531X_RESET_WLAN1 |\
++ AR531X_RESET_WARM_WLAN1_MAC |\
++ AR531X_RESET_WARM_WLAN1_BB
++
++/* AR5312_CLOCKCTL1 register bit field definitions */
++#define AR5312_CLOCKCTL1_PREDIVIDE_MASK 0x00000030
++#define AR5312_CLOCKCTL1_PREDIVIDE_SHIFT 4
++#define AR5312_CLOCKCTL1_MULTIPLIER_MASK 0x00001f00
++#define AR5312_CLOCKCTL1_MULTIPLIER_SHIFT 8
++#define AR5312_CLOCKCTL1_DOUBLER_MASK 0x00010000
++
++/* Valid for AR5312 and AR2312 */
++#define AR5312_CLOCKCTL1_PREDIVIDE_MASK 0x00000030
++#define AR5312_CLOCKCTL1_PREDIVIDE_SHIFT 4
++#define AR5312_CLOCKCTL1_MULTIPLIER_MASK 0x00001f00
++#define AR5312_CLOCKCTL1_MULTIPLIER_SHIFT 8
++#define AR5312_CLOCKCTL1_DOUBLER_MASK 0x00010000
++
++/* Valid for AR2313 */
++#define AR2313_CLOCKCTL1_PREDIVIDE_MASK 0x00003000
++#define AR2313_CLOCKCTL1_PREDIVIDE_SHIFT 12
++#define AR2313_CLOCKCTL1_MULTIPLIER_MASK 0x001f0000
++#define AR2313_CLOCKCTL1_MULTIPLIER_SHIFT 16
++#define AR2313_CLOCKCTL1_DOUBLER_MASK 0x00000000
++
++
++/* AR531X_ENABLE register bit field definitions */
++#define AR531X_ENABLE_WLAN0 0x0001
++#define AR531X_ENABLE_ENET0 0x0002
++#define AR531X_ENABLE_ENET1 0x0004
++#define AR531X_ENABLE_UART_AND_WLAN1_PIO 0x0008 /* UART, and WLAN1 PIOs */
++#define AR531X_ENABLE_WLAN1_DMA 0x0010 /* WLAN1 DMAs */
++#define AR531X_ENABLE_WLAN1 \
++ (AR531X_ENABLE_UART_AND_WLAN1_PIO | AR531X_ENABLE_WLAN1_DMA)
++
++/* AR531X_REV register bit field definitions */
++#define AR531X_REV_WMAC_MAJ 0xf000
++#define AR531X_REV_WMAC_MAJ_S 12
++#define AR531X_REV_WMAC_MIN 0x0f00
++#define AR531X_REV_WMAC_MIN_S 8
++#define AR531X_REV_MAJ 0x00f0
++#define AR531X_REV_MAJ_S 4
++#define AR531X_REV_MIN 0x000f
++#define AR531X_REV_MIN_S 0
++#define AR531X_REV_CHIP (REV_MAJ|REV_MIN)
++
++/* Major revision numbers, bits 7..4 of Revision ID register */
++#define AR531X_REV_MAJ_AR5312 0x4
++#define AR531X_REV_MAJ_AR2313 0x5
++
++/* Minor revision numbers, bits 3..0 of Revision ID register */
++#define AR5312_REV_MIN_DUAL 0x0 /* Dual WLAN version */
++#define AR5312_REV_MIN_SINGLE 0x1 /* Single WLAN version */
++
++/* AR531X_FLASHCTL register bit field definitions */
++#define FLASHCTL_IDCY 0x0000000f /* Idle cycle turn around time */
++#define FLASHCTL_IDCY_S 0
++#define FLASHCTL_WST1 0x000003e0 /* Wait state 1 */
++#define FLASHCTL_WST1_S 5
++#define FLASHCTL_RBLE 0x00000400 /* Read byte lane enable */
++#define FLASHCTL_WST2 0x0000f800 /* Wait state 2 */
++#define FLASHCTL_WST2_S 11
++#define FLASHCTL_AC 0x00070000 /* Flash address check (added) */
++#define FLASHCTL_AC_S 16
++#define FLASHCTL_AC_128K 0x00000000
++#define FLASHCTL_AC_256K 0x00010000
++#define FLASHCTL_AC_512K 0x00020000
++#define FLASHCTL_AC_1M 0x00030000
++#define FLASHCTL_AC_2M 0x00040000
++#define FLASHCTL_AC_4M 0x00050000
++#define FLASHCTL_AC_8M 0x00060000
++#define FLASHCTL_AC_RES 0x00070000 /* 16MB is not supported */
++#define FLASHCTL_E 0x00080000 /* Flash bank enable (added) */
++#define FLASHCTL_BUSERR 0x01000000 /* Bus transfer error status flag */
++#define FLASHCTL_WPERR 0x02000000 /* Write protect error status flag */
++#define FLASHCTL_WP 0x04000000 /* Write protect */
++#define FLASHCTL_BM 0x08000000 /* Burst mode */
++#define FLASHCTL_MW 0x30000000 /* Memory width */
++#define FLASHCTL_MWx8 0x00000000 /* Memory width x8 */
++#define FLASHCTL_MWx16 0x10000000 /* Memory width x16 */
++#define FLASHCTL_MWx32 0x20000000 /* Memory width x32 (not supported) */
++#define FLASHCTL_ATNR 0x00000000 /* Access type == no retry */
++#define FLASHCTL_ATR 0x80000000 /* Access type == retry every */
++#define FLASHCTL_ATR4 0xc0000000 /* Access type == retry every 4 */
++
++/* ARM Flash Controller -- 3 flash banks with either x8 or x16 devices. */
++#define AR531X_FLASHCTL0 (AR531X_FLASHCTL + 0x00)
++#define AR531X_FLASHCTL1 (AR531X_FLASHCTL + 0x04)
++#define AR531X_FLASHCTL2 (AR531X_FLASHCTL + 0x08)
++
++/* ARM SDRAM Controller -- just enough to determine memory size */
++#define AR531X_MEM_CFG1 (AR531X_SDRAMCTL + 0x04)
++#define MEM_CFG1_AC0 0x00000700 /* bank 0: SDRAM addr check (added) */
++#define MEM_CFG1_AC0_S 8
++#define MEM_CFG1_AC1 0x00007000 /* bank 1: SDRAM addr check (added) */
++#define MEM_CFG1_AC1_S 12
++
++/* GPIO Address Map */
++#define AR531X_GPIO (AR531X_APBBASE + 0x2000)
++#define AR531X_GPIO_DO (AR531X_GPIO + 0x00) /* output register */
++#define AR531X_GPIO_DI (AR531X_GPIO + 0x04) /* intput register */
++#define AR531X_GPIO_CR (AR531X_GPIO + 0x08) /* control register */
++
++/* GPIO Control Register bit field definitions */
++#define GPIO_CR_M(x) (1 << (x)) /* mask for i/o */
++#define GPIO_CR_O(x) (0 << (x)) /* mask for output */
++#define GPIO_CR_I(x) (1 << (x)) /* mask for input */
++#define GPIO_CR_INT(x) (1 << ((x)+8)) /* mask for interrupt */
++#define GPIO_CR_UART(x) (1 << ((x)+16)) /* uart multiplex */
++
++
++typedef unsigned int AR531X_REG;
++
++#define sysRegRead(phys) \
++ (*(volatile AR531X_REG *)PHYS_TO_K1(phys))
++
++#define sysRegWrite(phys, val) \
++ ((*(volatile AR531X_REG *)PHYS_TO_K1(phys)) = (val))
++
++
++/*
++ * This is board-specific data that is stored in a "fixed" location in flash.
++ * It is shared across operating systems, so it should not be changed lightly.
++ * The main reason we need it is in order to extract the ethernet MAC
++ * address(es).
++ */
++struct ar531x_boarddata {
++ u32 magic; /* board data is valid */
++#define AR531X_BD_MAGIC 0x35333131 /* "5311", for all 531x platforms */
++ u16 cksum; /* checksum (starting with BD_REV 2) */
++ u16 rev; /* revision of this struct */
++#define BD_REV 4
++ char boardName[64]; /* Name of board */
++ u16 major; /* Board major number */
++ u16 minor; /* Board minor number */
++ u32 config; /* Board configuration */
++#define BD_ENET0 0x00000001 /* ENET0 is stuffed */
++#define BD_ENET1 0x00000002 /* ENET1 is stuffed */
++#define BD_UART1 0x00000004 /* UART1 is stuffed */
++#define BD_UART0 0x00000008 /* UART0 is stuffed (dma) */
++#define BD_RSTFACTORY 0x00000010 /* Reset factory defaults stuffed */
++#define BD_SYSLED 0x00000020 /* System LED stuffed */
++#define BD_EXTUARTCLK 0x00000040 /* External UART clock */
++#define BD_CPUFREQ 0x00000080 /* cpu freq is valid in nvram */
++#define BD_SYSFREQ 0x00000100 /* sys freq is set in nvram */
++#define BD_WLAN0 0x00000200 /* Enable WLAN0 */
++#define BD_MEMCAP 0x00000400 /* CAP SDRAM @ memCap for testing */
++#define BD_DISWATCHDOG 0x00000800 /* disable system watchdog */
++#define BD_WLAN1 0x00001000 /* Enable WLAN1 (ar5212) */
++#define BD_ISCASPER 0x00002000 /* FLAG for AR2312 */
++#define BD_WLAN0_2G_EN 0x00004000 /* FLAG for radio0_2G */
++#define BD_WLAN0_5G_EN 0x00008000 /* FLAG for radio0_2G */
++#define BD_WLAN1_2G_EN 0x00020000 /* FLAG for radio0_2G */
++#define BD_WLAN1_5G_EN 0x00040000 /* FLAG for radio0_2G */
++ u16 resetConfigGpio; /* Reset factory GPIO pin */
++ u16 sysLedGpio; /* System LED GPIO pin */
++
++ u32 cpuFreq; /* CPU core frequency in Hz */
++ u32 sysFreq; /* System frequency in Hz */
++ u32 cntFreq; /* Calculated C0_COUNT frequency */
++
++ u8 wlan0Mac[6];
++ u8 enet0Mac[6];
++ u8 enet1Mac[6];
++
++ u16 pciId; /* Pseudo PCIID for common code */
++ u16 memCap; /* cap bank1 in MB */
++
++ /* version 3 */
++ u8 wlan1Mac[6]; /* (ar5212) */
++};
++#endif /* AR531X_H */
+diff -urN linux-2.4.32/arch/mips/ar531x/ar531xintr.S linux-2.4.32.new/arch/mips/ar531x/ar531xintr.S
+--- linux-2.4.32/arch/mips/ar531x/ar531xintr.S 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.4.32.new/arch/mips/ar531x/ar531xintr.S 2005-12-24 20:29:42.103311176 +0000
+@@ -0,0 +1,30 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License. See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright © 2003 Atheros Communications, Inc., All Rights Reserved.
++ */
++
++#include <asm/asm.h>
++#include <asm/mipsregs.h>
++#include <asm/regdef.h>
++#include <asm/stackframe.h>
++
++/*
++ * Glue code to save registers and get us to the interrupt dispatcher
++ */
++ .text
++ .set noat
++ .align 5
++NESTED(ar531x_interrupt_receive, PT_SIZE, sp)
++ SAVE_ALL
++ CLI
++ .set at
++
++ move a0, sp
++ jal ar531x_irq_dispatch
++
++ j ret_from_irq
++
++ END(ar531x_interrupt_receive)
+diff -urN linux-2.4.32/arch/mips/ar531x/ar531xirq.c linux-2.4.32.new/arch/mips/ar531x/ar531xirq.c
+--- linux-2.4.32/arch/mips/ar531x/ar531xirq.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.4.32.new/arch/mips/ar531x/ar531xirq.c 2005-12-24 20:29:42.132306768 +0000
+@@ -0,0 +1,292 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License. See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright © 2003 Atheros Communications, Inc., All Rights Reserved.
++ */
++
++/*
++ * Interrupt support for AR531X WiSOC.
++ */
++
++#include <linux/config.h>
++#include <linux/init.h>
++#include <linux/kernel_stat.h>
++#include <linux/signal.h>
++#include <linux/sched.h>
++#include <linux/interrupt.h>
++#include <linux/slab.h>
++#include <linux/random.h>
++#include <linux/pm.h>
++#include <linux/delay.h>
++#include <linux/reboot.h>
++
++#include <asm/irq.h>
++#include <asm/mipsregs.h>
++#include <asm/gdb-stub.h>
++
++#include "ar531xlnx.h"
++#include <asm/irq_cpu.h>
++
++extern int setup_irq(unsigned int irq, struct irqaction *irqaction);
++
++static void ar531x_misc_intr_enable(unsigned int irq);
++static void ar531x_misc_intr_disable(unsigned int irq);
++
++/* Turn on the specified AR531X_MISC_IRQ interrupt */
++static unsigned int
++ar531x_misc_intr_startup(unsigned int irq)
++{
++ ar531x_misc_intr_enable(irq);
++ return 0;
++}
++
++/* Turn off the specified AR531X_MISC_IRQ interrupt */
++static void
++ar531x_misc_intr_shutdown(unsigned int irq)
++{
++ ar531x_misc_intr_disable(irq);
++}
++
++/* Enable the specified AR531X_MISC_IRQ interrupt */
++static void
++ar531x_misc_intr_enable(unsigned int irq)
++{
++ unsigned int imr;
++
++ imr = sysRegRead(AR531X_IMR);
++ imr |= (1 << (irq - AR531X_MISC_IRQ_BASE - 1));
++ sysRegWrite(AR531X_IMR, imr);
++ sysRegRead(AR531X_IMR); /* flush write buffer */
++}
++
++/* Disable the specified AR531X_MISC_IRQ interrupt */
++static void
++ar531x_misc_intr_disable(unsigned int irq)
++{
++ unsigned int imr;
++
++ imr = sysRegRead(AR531X_IMR);
++ imr &= ~(1 << (irq - AR531X_MISC_IRQ_BASE - 1));
++ sysRegWrite(AR531X_IMR, imr);
++ sysRegRead(AR531X_IMR); /* flush write buffer */
++}
++
++static void
++ar531x_misc_intr_ack(unsigned int irq)
++{
++ ar531x_misc_intr_disable(irq);
++}
++
++static void
++ar531x_misc_intr_end(unsigned int irq)
++{
++ if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
++ ar531x_misc_intr_enable(irq);
++}
++
++static void
++ar531x_misc_intr_set_affinity(unsigned int irq, unsigned long mask)
++{
++ /* Only 1 CPU; ignore affinity request */
++}
++
++struct hw_interrupt_type ar531x_misc_intr_controller = {
++ "AR531X MISC",
++ ar531x_misc_intr_startup,
++ ar531x_misc_intr_shutdown,
++ ar531x_misc_intr_enable,
++ ar531x_misc_intr_disable,
++ ar531x_misc_intr_ack,
++ ar531x_misc_intr_end,
++ ar531x_misc_intr_set_affinity,
++};
++
++int ar531x_misc_irq_base;
++
++/*
++ * Determine interrupt source among interrupts that use IP6
++ */
++void
++ar531x_misc_intr_init(int irq_base)
++{
++ int i;
++
++ for (i = irq_base; i < irq_base + AR531X_MISC_IRQ_COUNT; i++) {
++ irq_desc[i].status = IRQ_DISABLED;
++ irq_desc[i].action = NULL;
++ irq_desc[i].depth = 1;
++ irq_desc[i].handler = &ar531x_misc_intr_controller;
++ }
++
++ ar531x_misc_irq_base = irq_base;
++}
++
++/* ARGSUSED */
++void
++spurious_irq_handler(int cpl, void *dev_id, struct pt_regs *regs)
++{
++ /*
++ printk("spurious_irq_handler: %d cause=0x%8.8x status=0x%8.8x\n",
++ cpl, cause_intrs, status_intrs);
++ */
++}
++
++/* ARGSUSED */
++void
++spurious_misc_handler(int cpl, void *dev_id, struct pt_regs *regs)
++{
++ /*
++ printk("spurious_misc_handler: 0x%x isr=0x%8.8x imr=0x%8.8x\n",
++ cpl, ar531x_isr, ar531x_imr);
++ */
++}
++
++void
++ar531x_timer_handler(int cpl, void *dev_id, struct pt_regs *regs)
++{
++ (void)sysRegRead(AR531X_TIMER); /* clear interrupt */
++}
++
++void
++ar531x_ahb_proc_handler(int cpl, void *dev_id, struct pt_regs *regs)
++{
++ u32 procAddr;
++ u32 proc1;
++ u32 dmaAddr;
++ u32 dma1;
++
++ proc1 = sysRegRead(AR531X_PROC1);
++ procAddr = sysRegRead(AR531X_PROCADDR); /* clears error state */
++ dma1 = sysRegRead(AR531X_DMA1);
++ dmaAddr = sysRegRead(AR531X_DMAADDR); /* clears error state */
++
++ printk("AHB interrupt: PROCADDR=0x%8.8x PROC1=0x%8.8x DMAADDR=0x%8.8x DMA1=0x%8.8x\n",
++ procAddr, proc1, dmaAddr, dma1);
++
++ machine_restart("AHB error"); /* Catastrophic failure */
++}
++
++static struct irqaction cascade =
++ {no_action, SA_INTERRUPT, 0, "cascade",
++ NULL, NULL};
++
++static struct irqaction spurious_irq =
++ {spurious_irq_handler, SA_INTERRUPT, 0, "spurious_irq",
++ NULL, NULL};
++
++static struct irqaction spurious_misc =
++ {spurious_misc_handler, SA_INTERRUPT, 0, "spurious_misc",
++ NULL, NULL};
++
++static struct irqaction ar531x_timer_interrupt =
++ {ar531x_timer_handler, SA_INTERRUPT, 0, "ar531x_timer_interrupt",
++ NULL, NULL};
++
++static struct irqaction ar531x_ahb_proc_interrupt =
++ {ar531x_ahb_proc_handler, SA_INTERRUPT, 0, "ar531x_ahb_proc_interrupt",
++ NULL, NULL};
++
++extern asmlinkage void ar531x_interrupt_receive(void);
++
++/*
++ * Called when an interrupt is received, this function
++ * determines exactly which interrupt it was, and it
++ * invokes the appropriate handler.
++ *
++ * Implicitly, we also define interrupt priority by
++ * choosing which to dispatch first.
++ */
++void
++ar531x_irq_dispatch(struct pt_regs *regs)
++{
++ int cause_intrs = regs->cp0_cause;
++ int status_intrs = regs->cp0_status;
++ int pending = cause_intrs & status_intrs;
++
++ if (pending & CAUSEF_IP2) {
++ do_IRQ(AR531X_IRQ_WLAN0_INTRS, regs);
++ }
++ else if (pending & CAUSEF_IP3) {
++ do_IRQ(AR531X_IRQ_ENET0_INTRS, regs);
++ }
++ else if (pending & CAUSEF_IP4) {
++ do_IRQ(AR531X_IRQ_ENET1_INTRS, regs);
++ }
++ else if (pending & CAUSEF_IP5) {
++ do_IRQ(AR531X_IRQ_WLAN1_INTRS, regs);
++ }
++ else if (pending & CAUSEF_IP6) {
++ AR531X_REG ar531x_isr = sysRegRead(AR531X_ISR);
++ AR531X_REG ar531x_imr = sysRegRead(AR531X_IMR);
++ unsigned int ar531x_misc_intrs = ar531x_isr & ar531x_imr;
++
++ if (ar531x_misc_intrs & AR531X_ISR_TIMER)
++ do_IRQ(AR531X_MISC_IRQ_TIMER, regs);
++ else if (ar531x_misc_intrs & AR531X_ISR_AHBPROC)
++ do_IRQ(AR531X_MISC_IRQ_AHB_PROC, regs);
++ else if (ar531x_misc_intrs & AR531X_ISR_AHBDMA)
++ do_IRQ(AR531X_MISC_IRQ_AHB_DMA, regs);
++ else if (ar531x_misc_intrs & AR531X_ISR_GPIO)
++ {
++ int i;
++ u32 gpioIntPending;
++
++ gpioIntPending = sysRegRead(AR531X_GPIO_DI) & gpioIntMask;
++ for (i=0; i<AR531X_GPIO_IRQ_COUNT; i++) {
++ if (gpioIntPending & (1 << i))
++ do_IRQ(AR531X_GPIO_IRQ(i), regs);
++ }
++ }
++ else if ((ar531x_misc_intrs & AR531X_ISR_UART0) ||
++ (ar531x_misc_intrs & AR531X_ISR_UART0DMA)) {
++ do_IRQ(AR531X_MISC_IRQ_UART0, regs);
++#if CONFIG_KGDB
++ if (kgdbInterrupt()) {
++ if (!user_mode(regs))
++ set_async_breakpoint((unsigned long *)&regs->cp0_epc);
++ }
++#endif /* CONFIG_KGDB */
++ }
++ else if (ar531x_misc_intrs & AR531X_ISR_WD)
++ do_IRQ(AR531X_MISC_IRQ_WATCHDOG, regs);
++ else if (ar531x_misc_intrs & AR531X_ISR_LOCAL)
++ do_IRQ(AR531X_MISC_IRQ_LOCAL, regs);
++ else
++ do_IRQ(AR531X_MISC_IRQ_NONE, regs);
++ } else if (pending & CAUSEF_IP7)
++ do_IRQ(AR531X_IRQ_CPU_CLOCK, regs);
++ else
++ do_IRQ(AR531X_IRQ_NONE, regs);
++}
++
++void __init init_IRQ(void)
++{
++ init_generic_irq();
++ set_except_vector(0, ar531x_interrupt_receive);
++
++ /* Initialize interrupt controllers */
++ mips_cpu_irq_init(MIPS_CPU_IRQ_BASE);
++ ar531x_misc_intr_init(AR531X_MISC_IRQ_BASE);
++ ar531x_gpio_intr_init(AR531X_GPIO_IRQ_BASE);
++ setup_irq(AR531X_IRQ_MISC_INTRS, &cascade);
++ /*
++ * AR531X_IRQ_CPU_CLOCK is setup by ar531x_timer_setup.
++ */
++
++ /* Default "spurious interrupt" handlers */
++ setup_irq(AR531X_IRQ_NONE, &spurious_irq);
++ setup_irq(AR531X_MISC_IRQ_NONE, &spurious_misc);
++ setup_irq(AR531X_GPIO_IRQ_NONE, &spurious_gpio);
++
++ setup_irq(AR531X_MISC_IRQ_TIMER, &ar531x_timer_interrupt);
++ setup_irq(AR531X_MISC_IRQ_AHB_PROC, &ar531x_ahb_proc_interrupt);
++ setup_irq(AR531X_MISC_IRQ_GPIO, &cascade);
++
++#ifdef CONFIG_KGDB
++#if CONFIG_EARLY_STOP
++ kgdbInit();
++#endif
++#endif
++}
+diff -urN linux-2.4.32/arch/mips/ar531x/ar531xksyms.c linux-2.4.32.new/arch/mips/ar531x/ar531xksyms.c
+--- linux-2.4.32/arch/mips/ar531x/ar531xksyms.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.4.32.new/arch/mips/ar531x/ar531xksyms.c 2005-12-24 20:29:42.132306768 +0000
+@@ -0,0 +1,16 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License. See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright © 2003 Atheros Communications, Inc., All Rights Reserved.
++ */
++
++#include <linux/module.h>
++#include "asm/atheros/ar531xbsp.h"
++
++#if CONFIG_KGDB
++EXPORT_SYMBOL(kgdbInit);
++EXPORT_SYMBOL(kgdbEnabled);
++#endif
++EXPORT_SYMBOL(ar531x_sys_frequency);
+diff -urN linux-2.4.32/arch/mips/ar531x/ar531xlnx.h linux-2.4.32.new/arch/mips/ar531x/ar531xlnx.h
+--- linux-2.4.32/arch/mips/ar531x/ar531xlnx.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.4.32.new/arch/mips/ar531x/ar531xlnx.h 2005-12-24 20:29:42.133306616 +0000
+@@ -0,0 +1,122 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License. See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright © 2003 Atheros Communications, Inc., All Rights Reserved.
++ */
++
++/*
++ * This file contains definitions needed in order to compile
++ * AR531X products for linux. Definitions that are largely
++ * AR531X-specific and independent of operating system belong
++ * in ar531x.h rather than this file.
++ */
++#include "ar531x.h"
++
++#define MIPS_CPU_IRQ_BASE 0x00
++#define AR531X_HIGH_PRIO 0x10
++#define AR531X_MISC_IRQ_BASE 0x20
++#define AR531X_GPIO_IRQ_BASE 0x30
++
++/* Software's idea of interrupts handled by "CPU Interrupt Controller" */
++#define AR531X_IRQ_NONE MIPS_CPU_IRQ_BASE+0
++#define AR531X_IRQ_WLAN0_INTRS MIPS_CPU_IRQ_BASE+2 /* C0_CAUSE: 0x0400 */
++#define AR531X_IRQ_ENET0_INTRS MIPS_CPU_IRQ_BASE+3 /* C0_CAUSE: 0x0800 */
++#define AR531X_IRQ_ENET1_INTRS MIPS_CPU_IRQ_BASE+4 /* C0_CAUSE: 0x1000 */
++#define AR531X_IRQ_WLAN1_INTRS MIPS_CPU_IRQ_BASE+5 /* C0_CAUSE: 0x2000 */
++#define AR531X_IRQ_MISC_INTRS MIPS_CPU_IRQ_BASE+6 /* C0_CAUSE: 0x4000 */
++#define AR531X_IRQ_CPU_CLOCK MIPS_CPU_IRQ_BASE+7 /* C0_CAUSE: 0x8000 */
++
++/* Miscellaneous interrupts, which share IP6 */
++#define AR531X_MISC_IRQ_NONE AR531X_MISC_IRQ_BASE+0
++#define AR531X_MISC_IRQ_TIMER AR531X_MISC_IRQ_BASE+1
++#define AR531X_MISC_IRQ_AHB_PROC AR531X_MISC_IRQ_BASE+2
++#define AR531X_MISC_IRQ_AHB_DMA AR531X_MISC_IRQ_BASE+3
++#define AR531X_MISC_IRQ_GPIO AR531X_MISC_IRQ_BASE+4
++#define AR531X_MISC_IRQ_UART0 AR531X_MISC_IRQ_BASE+5
++#define AR531X_MISC_IRQ_UART0_DMA AR531X_MISC_IRQ_BASE+6
++#define AR531X_MISC_IRQ_WATCHDOG AR531X_MISC_IRQ_BASE+7
++#define AR531X_MISC_IRQ_LOCAL AR531X_MISC_IRQ_BASE+8
++#define AR531X_MISC_IRQ_COUNT 9
++
++/* GPIO Interrupts [0..7], share AR531X_MISC_IRQ_GPIO */
++#define AR531X_GPIO_IRQ_NONE AR531X_MISC_IRQ_BASE+0
++#define AR531X_GPIO_IRQ(n) AR531X_MISC_IRQ_BASE+(n)+1
++#define AR531X_GPIO_IRQ_COUNT 9
++
++#define PHYS_TO_K1(physaddr) KSEG1ADDR(physaddr)
++#define PHYS_TO_K0(physaddr) KSEG0ADDR(physaddr)
++#define UNMAPPED_TO_PHYS(vaddr) PHYSADDR(vaddr)
++#define IS_UNMAPPED_VADDR(vaddr) \
++ ((KSEGX(vaddr) == KSEG0) || (KSEGX(vaddr) == KSEG1))
++
++/* IOCTL commands for /proc/ar531x */
++#define AR531X_CTRL_DO_BREAKPOINT 1
++#define AR531X_CTRL_DO_MADWIFI 2
++
++/*
++ * Definitions for operating system portability.
++ * These are vxWorks-->Linux translations.
++ */
++#define LOCAL static
++#define BOOL int
++#define TRUE 1
++#define FALSE 0
++#define UINT8 u8
++#define UINT16 u16
++#define UINT32 u32
++#define PRINTF printk
++#if /* DEBUG */ 1
++#define DEBUG_PRINTF printk
++#define INLINE
++#else
++DEBUG_PRINTF while (0) printk
++#define INLINE inline
++#endif
++#define sysUDelay(usecs) udelay(usecs)
++#define sysMsDelay(msecs) mdelay(msecs)
++typedef volatile UINT8 *VIRT_ADDR;
++#define MALLOC(sz) kmalloc(sz, GFP_KERNEL)
++#define MALLOC_NOSLEEP(sz) kmalloc(sz, GFP_ATOMIC)
++#define FREE(ptr) kfree((void *)ptr)
++#define BSP_BUG() do { printk("kernel BSP BUG at %s:%d!\n", __FILE__, __LINE__); *(int *)0=0; } while (0)
++#define BSP_BUG_ON(condition) do { if (unlikely((condition)!=0)) BSP_BUG(); } while(0)
++#define ASSERT(x) BSP_BUG_ON(!(x))
++
++extern struct ar531x_boarddata *ar531x_board_configuration;
++extern char *ar531x_radio_configuration;
++extern char *enet_mac_address_get(int MACUnit);
++
++extern void kgdbInit(void);
++extern int kgdbEnabled(void);
++extern void breakpoint(void);
++extern int kgdbInterrupt(void);
++extern unsigned int ar531x_cpu_frequency(void);
++extern unsigned int ar531x_sys_frequency(void);
++
++/* GPIO support */
++extern struct irqaction spurious_gpio;
++extern unsigned int gpioIntMask;
++extern void ar531x_gpio_intr_init(int irq_base);
++extern void ar531x_gpio_ctrl_output(int gpio);
++extern void ar531x_gpio_ctrl_input(int gpio);
++extern void ar531x_gpio_set(int gpio, int val);
++extern int ar531x_gpio_get(int gpio);
++extern void ar531x_gpio_intr_enable(unsigned int irq);
++extern void ar531x_gpio_intr_disable(unsigned int irq);
++
++/* Watchdog Timer support */
++extern int watchdog_start(unsigned int milliseconds);
++extern int watchdog_stop(void);
++extern int watchdog_is_enabled(void);
++extern unsigned int watchdog_min_timer_reached(void);
++extern void watchdog_notify_alive(void);
++
++#define A_DATA_CACHE_INVAL(start, length) \
++ dma_cache_inv((UINT32)(start),(length))
++
++#define sysWbFlush() mb()
++
++#define intDisable(x) cli()
++#define intEnable(x) sti()
+diff -urN linux-2.4.32/arch/mips/ar531x/ar531xprom.c linux-2.4.32.new/arch/mips/ar531x/ar531xprom.c
+--- linux-2.4.32/arch/mips/ar531x/ar531xprom.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.4.32.new/arch/mips/ar531x/ar531xprom.c 2005-12-24 20:29:42.133306616 +0000
+@@ -0,0 +1,84 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License. See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright MontaVista Software Inc
++ * Copyright © 2003 Atheros Communications, Inc., All Rights Reserved.
++ */
++
++/*
++ * Prom setup file for ar531x
++ */
++
++#include <linux/init.h>
++#include <linux/config.h>
++#include <linux/kernel.h>
++#include <linux/string.h>
++#include <linux/mm.h>
++#include <linux/bootmem.h>
++
++#include <asm/bootinfo.h>
++#include <asm/addrspace.h>
++
++#include "ar531xlnx.h"
++
++#define COMMAND_LINE_SIZE 512
++
++char arcs_cmdline[COMMAND_LINE_SIZE];
++
++void __init prom_init(int argc, char *argv[])
++{
++ int i;
++ unsigned int memcfg1;
++ int bank0AC, bank1AC;
++ int memsz_in_mb;
++
++ strcpy(arcs_cmdline, "console=ttyS0,9600");
++ for (i=0; i<argc; i++) {
++ strcat(arcs_cmdline, " ");
++ strcat(arcs_cmdline, argv[i]);
++ }
++
++ mips_machgroup = MACH_GROUP_AR531X;
++#ifdef CONFIG_APUNUSED
++ mips_machtype = MACH_ATHEROS_UNUSED;
++#endif
++#ifdef CONFIG_AP30
++ mips_machtype = MACH_ATHEROS_AP30;
++#endif
++#ifdef CONFIG_AP33
++ mips_machtype = MACH_ATHEROS_AP33;
++#endif
++#ifdef CONFIG_AP38
++ mips_machtype = MACH_ATHEROS_AP38;
++#endif
++#ifdef CONFIG_AP43
++ mips_machtype = MACH_ATHEROS_AP43;
++#endif
++#ifdef CONFIG_AP48
++ mips_machtype = MACH_ATHEROS_AP48;
++#endif
++#ifdef CONFIG_PB32
++ mips_machtype = MACH_ATHEROS_PB32;
++#endif
++
++
++ /* Determine SDRAM size based on Address Checks done at startup */
++ memcfg1 = sysRegRead(AR531X_MEM_CFG1);
++ bank0AC = (memcfg1 & MEM_CFG1_AC0) >> MEM_CFG1_AC0_S;
++ bank1AC = (memcfg1 & MEM_CFG1_AC1) >> MEM_CFG1_AC1_S;
++ memsz_in_mb = (bank0AC ? (1 << (bank0AC+1)) : 0)
++ + (bank1AC ? (1 << (bank1AC+1)) : 0);
++
++ /*
++ * By default, use all available memory. You can override this
++ * to use, say, 8MB by specifying "mem=8M" as an argument on the
++ * linux bootup command line.
++ */
++ add_memory_region(0, memsz_in_mb << 20, BOOT_MEM_RAM);
++}
++
++void __init prom_free_prom_memory(void)
++{
++}
+diff -urN linux-2.4.32/arch/mips/ar531x/ar531xsetup.c linux-2.4.32.new/arch/mips/ar531x/ar531xsetup.c
+--- linux-2.4.32/arch/mips/ar531x/ar531xsetup.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.4.32.new/arch/mips/ar531x/ar531xsetup.c 2005-12-24 20:29:42.133306616 +0000
+@@ -0,0 +1,240 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License. See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright © 2003 Atheros Communications, Inc., All Rights Reserved.
++ */
++
++/*
++ * Initialization for ar531x SOC.
++ */
++
++#include <linux/config.h>
++#include <linux/init.h>
++#include <linux/delay.h>
++#include <linux/irq.h>
++#include <linux/interrupt.h>
++#include <linux/serial.h>
++#include <linux/types.h>
++#include <linux/string.h>
++
++#include <asm/reboot.h>
++#include <asm/io.h>
++#include <asm/time.h>
++#include <asm/pgtable.h>
++#include <asm/processor.h>
++#include <asm/reboot.h>
++#include <asm/system.h>
++#include <asm/serial.h>
++
++#include "ar531xlnx.h"
++
++void
++ar531x_restart(char *command)
++{
++ for(;;) {
++ sysRegWrite(AR531X_RESET, AR531X_RESET_SYSTEM);
++ }
++}
++
++void
++ar531x_halt(void)
++{
++ printk(KERN_NOTICE "\n** You can safely turn off the power\n");
++ while (1);
++}
++
++void
++ar531x_power_off(void)
++{
++ ar531x_halt();
++}
++
++const char *
++get_system_type(void)
++{
++ return "Atheros AR531X";
++}
++
++/*
++ * This table is indexed by bits 5..4 of the CLOCKCTL1 register
++ * to determine the predevisor value.
++ */
++static int CLOCKCTL1_PREDIVIDE_TABLE[4] = {
++ 1,
++ 2,
++ 4,
++ 5
++};
++
++unsigned int
++ar531x_cpu_frequency(void)
++{
++ static unsigned int ar531x_calculated_cpu_freq;
++ unsigned int clockctl1_predivide_mask;
++ unsigned int clockctl1_predivide_shift;
++ unsigned int clockctl1_multiplier_mask;
++ unsigned int clockctl1_multiplier_shift;
++ unsigned int clockctl1_doubler_mask;
++ int wisoc_revision;
++
++ /*
++ * Trust the bootrom's idea of cpu frequency.
++ */
++ ar531x_calculated_cpu_freq = sysRegRead(AR5312_SCRATCH);
++ if (ar531x_calculated_cpu_freq)
++ return ar531x_calculated_cpu_freq;
++
++ wisoc_revision = (sysRegRead(AR531X_REV) & AR531X_REV_MAJ) >> AR531X_REV_MAJ_S;
++ if (wisoc_revision == AR531X_REV_MAJ_AR2313) {
++ clockctl1_predivide_mask = AR2313_CLOCKCTL1_PREDIVIDE_MASK;
++ clockctl1_predivide_shift = AR2313_CLOCKCTL1_PREDIVIDE_SHIFT;
++ clockctl1_multiplier_mask = AR2313_CLOCKCTL1_MULTIPLIER_MASK;
++ clockctl1_multiplier_shift = AR2313_CLOCKCTL1_MULTIPLIER_SHIFT;
++ clockctl1_doubler_mask = AR2313_CLOCKCTL1_DOUBLER_MASK;
++ } else { /* AR5312 and AR2312 */
++ clockctl1_predivide_mask = AR5312_CLOCKCTL1_PREDIVIDE_MASK;
++ clockctl1_predivide_shift = AR5312_CLOCKCTL1_PREDIVIDE_SHIFT;
++ clockctl1_multiplier_mask = AR5312_CLOCKCTL1_MULTIPLIER_MASK;
++ clockctl1_multiplier_shift = AR5312_CLOCKCTL1_MULTIPLIER_SHIFT;
++ clockctl1_doubler_mask = AR5312_CLOCKCTL1_DOUBLER_MASK;
++ }
++
++ /*
++ * Clocking is derived from a fixed 40MHz input clock.
++ * cpuFreq = InputClock * MULT (where MULT is PLL multiplier)
++ *
++ * sysFreq = cpuFreq / 4 (used for APB clock, serial,
++ * flash, Timer, Watchdog Timer)
++ *
++ * cntFreq = cpuFreq / 2 (use for CPU count/compare)
++ *
++ * So, for example, with a PLL multiplier of 5, we have
++ * cpuFrez = 200MHz
++ * sysFreq = 50MHz
++ * cntFreq = 100MHz
++ *
++ * We compute the CPU frequency, based on PLL settings.
++ */
++ if (ar531x_calculated_cpu_freq == 0) {
++ unsigned int clockCtl1 = sysRegRead(AR5312_CLOCKCTL1);
++
++ int preDivideSelect = (clockCtl1 & clockctl1_predivide_mask) >>
++ clockctl1_predivide_shift;
++
++ int preDivisor = CLOCKCTL1_PREDIVIDE_TABLE[preDivideSelect];
++
++ int multiplier = (clockCtl1 & clockctl1_multiplier_mask) >>
++ clockctl1_multiplier_shift;
++
++ if (clockCtl1 & clockctl1_doubler_mask) {
++ multiplier = multiplier << 1;
++ }
++
++ ar531x_calculated_cpu_freq = (40000000 / preDivisor) * multiplier;
++ }
++
++ return ar531x_calculated_cpu_freq;
++}
++
++unsigned int
++ar531x_sys_frequency(void)
++{
++ static unsigned int ar531x_calculated_sys_freq = 0;
++
++ if (ar531x_calculated_sys_freq == 0) {
++ ar531x_calculated_sys_freq = ar531x_cpu_frequency() / 4;
++ }
++
++ return ar531x_calculated_sys_freq;
++}
++
++static void __init
++flash_setup(void)
++{
++ UINT32 flash_ctl;
++
++ /* Configure flash bank 0 */
++ flash_ctl = FLASHCTL_E |
++ FLASHCTL_AC_8M |
++ FLASHCTL_RBLE |
++ (0x01 << FLASHCTL_IDCY_S) |
++ (0x07 << FLASHCTL_WST1_S) |
++ (0x07 << FLASHCTL_WST2_S) |
++ (sysRegRead(AR531X_FLASHCTL0) & FLASHCTL_MW);
++
++ sysRegWrite(AR531X_FLASHCTL0, flash_ctl);
++
++ /* Disable other flash banks */
++ sysRegWrite(AR531X_FLASHCTL1,
++ sysRegRead(AR531X_FLASHCTL1) & ~(FLASHCTL_E | FLASHCTL_AC));
++
++ sysRegWrite(AR531X_FLASHCTL2,
++ sysRegRead(AR531X_FLASHCTL2) & ~(FLASHCTL_E | FLASHCTL_AC));
++}
++
++
++
++void __init
++serial_setup(void)
++{
++ struct serial_struct s;
++
++ memset(&s, 0, sizeof(s));
++
++ s.flags = STD_COM_FLAGS;
++ s.io_type = SERIAL_IO_MEM;
++ s.baud_base = ar531x_sys_frequency()/16;
++ s.irq = AR531X_MISC_IRQ_UART0;
++ s.iomem_reg_shift = 2;
++ s.iomem_base = (u8 *)0xbc000003;
++
++ if (early_serial_setup(&s) != 0)
++ printk(KERN_ERR "early_serial_setup failed\n");
++}
++
++extern int setup_irq(unsigned int irq, struct irqaction *irqaction);
++static void __init
++ar531x_timer_setup(struct irqaction *irq)
++{
++ unsigned int count;
++
++ /* Usually irq is timer_irqaction (timer_interrupt) */
++ setup_irq(AR531X_IRQ_CPU_CLOCK, irq);
++
++ /* to generate the first CPU timer interrupt */
++ count = read_c0_count();
++ write_c0_compare(count + 1000);
++}
++
++extern void (*board_time_init)(void);
++
++static void __init
++ar531x_time_init(void)
++{
++ mips_hpt_frequency = ar531x_cpu_frequency() / 2;
++}
++
++void __init
++ar531x_setup(void)
++{
++ /* Clear any lingering AHB errors */
++ sysRegRead(AR531X_PROCADDR);
++ sysRegRead(AR531X_DMAADDR);
++
++ sysRegWrite(AR531X_WD_CTRL, AR531X_WD_CTRL_IGNORE_EXPIRATION);
++
++ /* Disable data watchpoints */
++ write_c0_watchlo0(0);
++
++ board_time_init = ar531x_time_init;
++ board_timer_setup = ar531x_timer_setup;
++
++ _machine_restart = ar531x_restart;
++ _machine_halt = ar531x_halt;
++ _machine_power_off = ar531x_power_off;
++
++ flash_setup();
++ serial_setup();
++}
+diff -urN linux-2.4.32/arch/mips/ar531x/Makefile linux-2.4.32.new/arch/mips/ar531x/Makefile
+--- linux-2.4.32/arch/mips/ar531x/Makefile 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.4.32.new/arch/mips/ar531x/Makefile 2005-12-24 20:29:42.010325312 +0000
+@@ -0,0 +1,33 @@
++#
++# This file is subject to the terms and conditions of the GNU General Public
++# License. See the file "COPYING" in the main directory of this archive
++# for more details.
++#
++# Copyright © 2003 Atheros Communications, Inc., All Rights Reserved.
++#
++
++# Makefile for Atheros ar531x boards
++#
++# Note! Dependencies are done automagically by 'make dep', which also
++# removes any old dependencies. DON'T put your own dependencies here
++# unless it's something special (ie not a .c file).
++#
++
++.S.s:
++ $(CPP) $(CFLAGS) $< -o $*.s
++.S.o:
++ $(CC) $(CFLAGS) -D__ASSEMBLY__ -c $< -o $*.o
++
++O_TARGET:= ar531x.o
++
++export-objs = ar531xksyms.o
++
++obj-y := ar531xdbg_io.o \
++ ar531xsetup.o \
++ ar531xprom.o \
++ ar531xirq.o \
++ ar531xintr.o \
++ ar531xgpio.o \
++ ar531xksyms.o
++
++include $(TOPDIR)/Rules.make
+diff -urN linux-2.4.32/arch/mips/ar531x/RAMDISK/backup-busybox.links linux-2.4.32.new/arch/mips/ar531x/RAMDISK/backup-busybox.links
+--- linux-2.4.32/arch/mips/ar531x/RAMDISK/backup-busybox.links 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.4.32.new/arch/mips/ar531x/RAMDISK/backup-busybox.links 2005-12-24 20:29:42.011325160 +0000
+@@ -0,0 +1,33 @@
++/usr/bin/[
++/sbin/brctl
++/bin/cat
++/bin/chmod
++/bin/cp
++/bin/df
++/bin/echo
++/bin/false
++/sbin/ifconfig
++/sbin/init
++/sbin/insmod
++/bin/kill
++/bin/ls
++/sbin/lsmod
++/bin/mkdir
++/sbin/modprobe
++/bin/mount
++/bin/msh
++/bin/mv
++/bin/ping
++/bin/ps
++/bin/pwd
++/sbin/reboot
++/bin/rm
++/bin/rmdir
++/sbin/rmmod
++/sbin/route
++/bin/sh
++/usr/bin/test
++/usr/bin/top
++/bin/true
++/bin/umount
++/usr/bin/wget
+diff -urN linux-2.4.32/arch/mips/ar531x/RAMDISK/busybox.links linux-2.4.32.new/arch/mips/ar531x/RAMDISK/busybox.links
+--- linux-2.4.32/arch/mips/ar531x/RAMDISK/busybox.links 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.4.32.new/arch/mips/ar531x/RAMDISK/busybox.links 2005-12-24 20:29:42.011325160 +0000
+@@ -0,0 +1,33 @@
++/usr/bin/[
++/sbin/brctl
++/bin/cat
++/bin/chmod
++/bin/cp
++/bin/df
++/bin/echo
++/bin/false
++/sbin/ifconfig
++/sbin/init
++/sbin/insmod
++/bin/kill
++/bin/ls
++/sbin/lsmod
++/bin/mkdir
++/sbin/modprobe
++/bin/mount
++/bin/msh
++/bin/mv
++/bin/ping
++/bin/ps
++/bin/pwd
++/sbin/reboot
++/bin/rm
++/bin/rmdir
++/sbin/rmmod
++/sbin/route
++/bin/sh
++/usr/bin/test
++/bin/true
++/bin/umount
++/bin/uname
++/usr/bin/wget
+diff -urN linux-2.4.32/arch/mips/ar531x/RAMDISK/Makefile linux-2.4.32.new/arch/mips/ar531x/RAMDISK/Makefile
+--- linux-2.4.32/arch/mips/ar531x/RAMDISK/Makefile 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.4.32.new/arch/mips/ar531x/RAMDISK/Makefile 2005-12-24 20:29:42.011325160 +0000
+@@ -0,0 +1,53 @@
++KERNEL_SOURCE=../../../..
++
++# The value for INITRDSIZE is extracted from linux/.config,
++# if it exists; otherwise, a default value is used.
++
++CONFIG_FILE = $(KERNEL_SOURCE)/.config
++
++ifeq ($(CONFIG_FILE),$(wildcard $(CONFIG_FILE)))
++
++include $(CONFIG_FILE)
++ifdef CONFIG_BLK_DEV_RAM_SIZE
++INITRDSIZE := $(shell echo $(CONFIG_BLK_DEV_RAM_SIZE))
++else
++INITRDSIZE := 8192
++endif
++
++else
++INITRDSIZE := 8192
++endif
++
++MOUNTPT = /mnt/xtmp
++
++ramdisk.gz: ramdisk
++ gzip -f ramdisk
++
++ramdisk:
++ ./makelinks
++ @echo "CREATING RAMDISK OF SIZE $(INITRDSIZE) on $@"
++ dd if=/dev/zero of=$@ bs=1k count=$(INITRDSIZE)
++ /sbin/mke2fs -vFm0 $@ $(INITRDSIZE)
++ if [ \! -e $(MOUNTPT) ]; then mkdir -p $(MOUNTPT) ; fi
++ mount -o loop $@ $(MOUNTPT)
++ @df $(MOUNTPT)
++ (cd rootdir; tar cf - . ) | (cd $(MOUNTPT) && tar xf - )
++ (cd $(MOUNTPT) ; chown -R root.root . )
++ @df $(MOUNTPT)
++ umount $(MOUNTPT)
++
++install:
++ @(if [ -d $(KERNEL_SOURCE)/arch/mips/ramdisk ]; \
++ then \
++ if [ -f ramdisk.gz ]; \
++ then \
++ cp ramdisk.gz $(KERNEL_SOURCE)/arch/mips/ramdisk/; \
++ else \
++ echo "No ramdisk.gz image"; \
++ fi; \
++ else \
++ echo "No ramdisk directory. Check KERNEL_SOURCE variable."; \
++ fi)
++
++clean:
++ rm -f ramdisk.gz ramdisk
+diff -urN linux-2.4.32/arch/mips/ar531x/RAMDISK/makelinks linux-2.4.32.new/arch/mips/ar531x/RAMDISK/makelinks
+--- linux-2.4.32/arch/mips/ar531x/RAMDISK/makelinks 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.4.32.new/arch/mips/ar531x/RAMDISK/makelinks 2005-12-24 20:29:42.012325008 +0000
+@@ -0,0 +1,65 @@
++#!/bin/sh
++
++if [ -f busybox.links ]
++then
++ cat busybox.links | sed 's/\//ln -s -f \/bin\/busybox rootdir\//' | /bin/sh
++fi
++
++cons=" root tty 622"
++disk=" root disk 660"
++mtd=" root root 640"
++makedev () { # usage: makedev name [bcu] major minor owner group mode
++ if [ "$opt_v" ]
++ then if [ "$opt_d" ]
++ then echo "rm -f $1"
++ else echo "$1 = $2 $3 $4 $5:$6 $7"
++ fi
++ fi
++ [ ! "$opt_n" ] && rm -f $1 &&
++ [ ! "$opt_d" ] && mknod $1 $2 $3 $4 &&
++ chown $5:$6 $1 &&
++ chmod $7 $1
++}
++
++makedev rootdir/dev/console c 5 1 $cons
++makedev rootdir/dev/ram b 1 1 $disk
++makedev rootdir/dev/ram0 b 1 0 $disk
++makedev rootdir/dev/ram1 b 1 1 $disk
++makedev rootdir/dev/ram2 b 1 2 $disk
++makedev rootdir/dev/ram3 b 1 3 $disk
++makedev rootdir/dev/ram4 b 1 4 $disk
++makedev rootdir/dev/ram5 b 1 5 $disk
++makedev rootdir/dev/ram6 b 1 6 $disk
++makedev rootdir/dev/ram7 b 1 7 $disk
++makedev rootdir/dev/ram8 b 1 8 $disk
++makedev rootdir/dev/ram9 b 1 9 $disk
++makedev rootdir/dev/ram10 b 1 10 $disk
++makedev rootdir/dev/ram11 b 1 11 $disk
++makedev rootdir/dev/ram12 b 1 12 $disk
++makedev rootdir/dev/ram13 b 1 13 $disk
++makedev rootdir/dev/ram14 b 1 14 $disk
++makedev rootdir/dev/ram15 b 1 15 $disk
++
++makedev rootdir/dev/mtd0 c 90 0 $mtd
++makedev rootdir/dev/mtd1 c 90 2 $mtd
++makedev rootdir/dev/mtd2 c 90 4 $mtd
++makedev rootdir/dev/mtd3 c 90 6 $mtd
++makedev rootdir/dev/mtd4 c 90 8 $mtd
++makedev rootdir/dev/mtd5 c 90 10 $mtd
++makedev rootdir/dev/mtd6 c 90 12 $mtd
++makedev rootdir/dev/mtdblock0 b 31 0 $mtd
++makedev rootdir/dev/mtdblock1 b 31 1 $mtd
++makedev rootdir/dev/mtdblock2 b 31 2 $mtd
++makedev rootdir/dev/mtdblock3 b 31 3 $mtd
++makedev rootdir/dev/mtdblock4 b 31 4 $mtd
++makedev rootdir/dev/mtdblock5 b 31 5 $mtd
++makedev rootdir/dev/mtdblock6 b 31 6 $mtd
++makedev rootdir/dev/mtdr0 c 90 1 $mtd
++makedev rootdir/dev/mtdr1 c 90 3 $mtd
++makedev rootdir/dev/mtdr2 c 90 5 $mtd
++makedev rootdir/dev/mtdr3 c 90 7 $mtd
++makedev rootdir/dev/mtdr4 c 90 9 $mtd
++makedev rootdir/dev/mtdr5 c 90 11 $mtd
++makedev rootdir/dev/mtdr6 c 90 13 $mtd
++
++cd rootdir/dev;ln -sf ram1 ram
+diff -urN linux-2.4.32/arch/mips/ar531x/RAMDISK/README linux-2.4.32.new/arch/mips/ar531x/RAMDISK/README
+--- linux-2.4.32/arch/mips/ar531x/RAMDISK/README 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.4.32.new/arch/mips/ar531x/RAMDISK/README 2005-12-24 20:29:42.011325160 +0000
+@@ -0,0 +1,40 @@
++How to build a ramdisk image for use as a root filesystem with AR531X
++
++Overview:
++In order to boot from a ramdisk root file system image, you will
++first create a root directory structure in the "rootdir" directory.
++Then run "make" to create a compressed root file system image in
++ramdisk.gz. Finally, copy this image into your kernel source tree
++and remake the kernel. The ramdisk image is then built into the
++kernel. When the kernel starts, it is uncompressed into RAM, and
++used as a root file system.
++
++If you'd like to use a pre-built ramdisk.gz rather than build
++one yourself:
++ cp arch/mips/ar531x/RAMDISK/ramdisk.gz arch/mips/ramdisk/ramdisk.gz
++
++Here are the detailed steps to build your own:
++
++1) Modify Makefile to point KERNEL_SOURCE at your linux source tree.
++
++2) Copy whatever additional files/directories/links you'd like to
++ under rootdir. Note that you're limited to CONFIG_BLK_DEV_RAM_SIZE
++ 1KB blocks, as specified in your linux/.config file.
++ Examples:
++ Copy busybox to rootdir/bin/
++ [NOTE: Copy busybox.links to this directory to
++ cause the makelinks script to automatically
++ set up all of the necessary busybox command links
++ in the rootdir/bin directory].
++
++ Copy any wireless driver modules into rootdir tree
++
++ You might want to make a copy of the rootdir directory
++ before you modify it, just in case you want to get back
++ to the original.
++
++3) LOGIN AS ROOT (e.g. "su") and type "make"
++
++4) Copy the resulting ramdisk.gz to your linux source tree under
++ arch/mips/ramdisk/ramdisk.gz
++ (or "make install" will do this step for you)
+Binary files linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/bin/busybox and linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/bin/busybox differ
+diff -urN linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/etc/fstab linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/etc/fstab
+--- linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/etc/fstab 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/etc/fstab 2005-12-24 20:29:42.063317256 +0000
+@@ -0,0 +1 @@
++/proc /proc proc defaults 0 0
+diff -urN linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/etc/group linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/etc/group
+--- linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/etc/group 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/etc/group 2005-12-24 20:29:42.064317104 +0000
+@@ -0,0 +1,18 @@
++root:x:0:
++wheel:x:10:
++bin:x:1:bin,daemon
++daemon:x:2:bin,daemon
++sys:x:3:bin,adm
++adm:x:4:adm,daemon
++tty:x:5:
++disk:x:6:
++lp:x:7:daemon,lp
++mem:x:8:
++kmem:x:9:
++operator:x:11:
++uucp:x:14:uucp
++dip:x:40:
++utmp:x:45:
++www:x:63:
++nobody:x:65534:
++users:x:100:
+diff -urN linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/etc/host.conf linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/etc/host.conf
+--- linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/etc/host.conf 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/etc/host.conf 2005-12-24 20:29:42.064317104 +0000
+@@ -0,0 +1,2 @@
++order hosts,bind
++multi on
+diff -urN linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/etc/inittab linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/etc/inittab
+--- linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/etc/inittab 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/etc/inittab 2005-12-24 20:29:42.064317104 +0000
+@@ -0,0 +1,2 @@
++::sysinit:/etc/rc.d/rcS
++::respawn:/bin/sh
+diff -urN linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/etc/nsswitch.conf linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/etc/nsswitch.conf
+--- linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/etc/nsswitch.conf 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/etc/nsswitch.conf 2005-12-24 20:29:42.065316952 +0000
+@@ -0,0 +1,16 @@
++# /etc/nsswitch.conf
++#
++# Name Service Switch configuration file.
++#
++
++passwd: compat
++shadow: compat
++group: compat
++
++hosts: files dns
++networks: files dns
++
++ethers: files
++protocols: files
++rpc: files
++services: files
+diff -urN linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/etc/passwd linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/etc/passwd
+--- linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/etc/passwd 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/etc/passwd 2005-12-24 20:29:42.065316952 +0000
+@@ -0,0 +1,11 @@
++root:x:0:0:root:/root:/bin/ash
++bin:x:1:1:bin:/bin:/bin/sh
++daemon:x:2:2:daemon:/usr/sbin:/bin/sh
++adm:x:3:4:adm:/adm:/bin/sh
++lp:x:4:7:lp:/var/spool/lpd:/bin/sh
++sync:x:5:0:sync:/bin:/bin/sync
++shutdown:x:6:11:shutdown:/sbin:/sbin/shutdown
++halt:x:7:0:halt:/sbin:/sbin/halt
++uucp:x:10:14:uucp:/var/spool/uucp:/bin/sh
++operator:x:11:0:Operator:/var:/bin/sh
++nobody:x:65534:65534:nobody:/home:/bin/sh
+diff -urN linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/etc/rc.d/rcS linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/etc/rc.d/rcS
+--- linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/etc/rc.d/rcS 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/etc/rc.d/rcS 2005-12-24 20:29:42.066316800 +0000
+@@ -0,0 +1,17 @@
++#!/bin/sh
++
++mount -a
++mount -t jffs2 -o remount +w /
++# mount -t ramfs /dev/ram /ramdisk
++
++echo Load MADWiFi wlan module
++insmod ../../lib/modules/2.4.25/net/wlan.o
++
++echo Load MADWiFi Atheros HAL module
++insmod ../../lib/modules/2.4.25/net/ath_hal.o
++
++echo Load MADWiFi Atheros Driver module
++insmod ../../lib/modules/2.4.25/net/ath_lbus.o
++
++exit
++
+diff -urN linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/etc/resolv.conf linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/etc/resolv.conf
+--- linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/etc/resolv.conf 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/etc/resolv.conf 2005-12-24 20:29:42.066316800 +0000
+@@ -0,0 +1,18 @@
++# /etc/resolv.conf - DNS setup file
++#
++# possible entries are:
++#
++# domain <domain> Local domain name. If not present, the
++# gethostbyname syscall is used to
++# determine the local domain name.
++#
++# search <list_of_domains> Search list for hostname lookup.
++# The search list is normally determined
++# from the local domain name but it
++# can be set to a list of domains.
++#
++# nameserver <ip_addr> Define which server to contact
++# for DNS lookups. If there are
++# multiple nameserver lines (Max=3),
++# they are queried in the listed order.
++#
+diff -urN linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/etc/securetty linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/etc/securetty
+--- linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/etc/securetty 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/etc/securetty 2005-12-24 20:29:42.066316800 +0000
+@@ -0,0 +1,12 @@
++tty1
++tty2
++tty3
++tty4
++tty5
++tty6
++tty7
++tty8
++ttyS0
++ttyS1
++ttyS2
++ttyS3
+diff -urN linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/etc/services linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/etc/services
+--- linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/etc/services 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/etc/services 2005-12-24 20:29:42.066316800 +0000
+@@ -0,0 +1,193 @@
++# $NetBSD: services,v 1.18 1996/03/26 00:07:58 mrg Exp $
++#
++# Network services, Internet style
++#
++# Note that it is presently the policy of IANA to assign a single well-known
++# port number for both TCP and UDP; hence, most entries here have two entries
++# even if the protocol doesn't support UDP operations.
++# Updated from RFC 1340, ``Assigned Numbers'' (July 1992). Not all ports
++# are included, only the more common ones.
++#
++# from: @(#)services 5.8 (Berkeley) 5/9/91
++#
++tcpmux 1/tcp # TCP port service multiplexer
++echo 7/tcp
++echo 7/udp
++discard 9/tcp sink null
++discard 9/udp sink null
++systat 11/tcp users
++daytime 13/tcp
++daytime 13/udp
++netstat 15/tcp
++qotd 17/tcp quote
++msp 18/tcp # message send protocol
++msp 18/udp # message send protocol
++chargen 19/tcp ttytst source
++chargen 19/udp ttytst source
++ftp-data 20/tcp # default ftp data port
++ftp 21/tcp
++ssh 22/tcp
++ssh 22/udp
++telnet 23/tcp
++# 24 - private
++smtp 25/tcp mail
++# 26 - unassigned
++time 37/tcp timserver
++time 37/udp timserver
++rlp 39/udp resource # resource location
++nameserver 42/tcp name # IEN 116
++whois 43/tcp nicname
++domain 53/tcp nameserver # name-domain server
++domain 53/udp nameserver
++mtp 57/tcp # deprecated
++bootps 67/tcp # BOOTP server
++bootps 67/udp
++bootpc 68/tcp # BOOTP client
++bootpc 68/udp
++tftp 69/udp
++gopher 70/tcp # Internet Gopher
++gopher 70/udp
++rje 77/tcp netrjs
++finger 79/tcp
++www 80/tcp http # WorldWideWeb HTTP
++www 80/udp # HyperText Transfer Protocol
++link 87/tcp ttylink
++kerberos 88/tcp krb5 # Kerberos v5
++kerberos 88/udp
++supdup 95/tcp
++# 100 - reserved
++hostnames 101/tcp hostname # usually from sri-nic
++iso-tsap 102/tcp tsap # part of ISODE.
++csnet-ns 105/tcp cso-ns # also used by CSO name server
++csnet-ns 105/udp cso-ns
++rtelnet 107/tcp # Remote Telnet
++rtelnet 107/udp
++pop2 109/tcp pop-2 postoffice # POP version 2
++pop2 109/udp
++pop3 110/tcp pop-3 # POP version 3
++pop3 110/udp
++sunrpc 111/tcp
++sunrpc 111/udp
++auth 113/tcp authentication tap ident
++sftp 115/tcp
++uucp-path 117/tcp
++nntp 119/tcp readnews untp # USENET News Transfer Protocol
++ntp 123/tcp
++ntp 123/udp # Network Time Protocol
++netbios-ns 137/tcp # NETBIOS Name Service
++netbios-ns 137/udp
++netbios-dgm 138/tcp # NETBIOS Datagram Service
++netbios-dgm 138/udp
++netbios-ssn 139/tcp # NETBIOS session service
++netbios-ssn 139/udp
++imap2 143/tcp imap # Interim Mail Access Proto v2
++imap2 143/udp
++snmp 161/udp # Simple Net Mgmt Proto
++snmp-trap 162/udp snmptrap # Traps for SNMP
++cmip-man 163/tcp # ISO mgmt over IP (CMOT)
++cmip-man 163/udp
++cmip-agent 164/tcp
++cmip-agent 164/udp
++xdmcp 177/tcp # X Display Mgr. Control Proto
++xdmcp 177/udp
++nextstep 178/tcp NeXTStep NextStep # NeXTStep window
++nextstep 178/udp NeXTStep NextStep # server
++bgp 179/tcp # Border Gateway Proto.
++bgp 179/udp
++prospero 191/tcp # Cliff Neuman's Prospero
++prospero 191/udp
++irc 194/tcp # Internet Relay Chat
++irc 194/udp
++smux 199/tcp # SNMP Unix Multiplexer
++smux 199/udp
++at-rtmp 201/tcp # AppleTalk routing
++at-rtmp 201/udp
++at-nbp 202/tcp # AppleTalk name binding
++at-nbp 202/udp
++at-echo 204/tcp # AppleTalk echo
++at-echo 204/udp
++at-zis 206/tcp # AppleTalk zone information
++at-zis 206/udp
++z3950 210/tcp wais # NISO Z39.50 database
++z3950 210/udp wais
++ipx 213/tcp # IPX
++ipx 213/udp
++imap3 220/tcp # Interactive Mail Access
++imap3 220/udp # Protocol v3
++ulistserv 372/tcp # UNIX Listserv
++ulistserv 372/udp
++#
++# UNIX specific services
++#
++exec 512/tcp
++biff 512/udp comsat
++login 513/tcp
++who 513/udp whod
++shell 514/tcp cmd # no passwords used
++syslog 514/udp
++printer 515/tcp spooler # line printer spooler
++talk 517/udp
++ntalk 518/udp
++route 520/udp router routed # RIP
++timed 525/udp timeserver
++tempo 526/tcp newdate
++courier 530/tcp rpc
++conference 531/tcp chat
++netnews 532/tcp readnews
++netwall 533/udp # -for emergency broadcasts
++uucp 540/tcp uucpd # uucp daemon
++remotefs 556/tcp rfs_server rfs # Brunhoff remote filesystem
++#
++webster 765/tcp # Network dictionary
++webster 765/udp
++# temporary entry (not officially registered by the Samba Team!)
++swat 901/tcp # Samba Web Administration Tool
++#
++# From ``Assigned Numbers'':
++#
++#> The Registered Ports are not controlled by the IANA and on most systems
++#> can be used by ordinary user processes or programs executed by ordinary
++#> users.
++#
++#> Ports are used in the TCP [45,106] to name the ends of logical
++#> connections which carry long term conversations. For the purpose of
++#> providing services to unknown callers, a service contact port is
++#> defined. This list specifies the port used by the server process as its
++#> contact port. While the IANA can not control uses of these ports it
++#> does register or list uses of these ports as a convienence to the
++#> community.
++#
++ingreslock 1524/tcp
++ingreslock 1524/udp
++prospero-np 1525/tcp # Prospero non-privileged
++prospero-np 1525/udp
++rfe 5002/tcp # Radio Free Ethernet
++rfe 5002/udp # Actually uses UDP only
++#
++#
++# Kerberos (Project Athena/MIT) services
++# Note that these are for Kerberos v4, and are unofficial.
++#
++klogin 543/tcp # Kerberos `rlogin'
++kshell 544/tcp krcmd # Kerberos `rsh'
++kerberos-adm 749/tcp # Kerberos `kadmin' (v5)
++kerberos4 750/udp kdc # Kerberos (server) udp
++kerberos4 750/tcp kdc # Kerberos (server) tcp
++kerberos-master 751/udp # Kerberos admin server udp
++kerberos-master 751/tcp # Kerberos admin server tcp
++krbupdate 760/tcp kreg # BSD Kerberos registration
++kpasswd 761/tcp kpwd # BSD Kerberos `passwd'
++eklogin 2105/tcp # Kerberos encrypted `rlogin'
++#
++# Unofficial but necessary (for NetBSD) services
++#
++supfilesrv 871/tcp # SUP server
++supfiledbg 1127/tcp # SUP debugging
++#
++# AppleTalk DDP entries (DDP: Datagram Delivery Protocol)
++#
++rtmp 1/ddp # Routing Table Maintenance Protocol
++nbp 2/ddp # Name Binding Protocol
++echo 4/ddp # AppleTalk Echo Protocol
++zip 6/ddp # Zone Information Protocol
++
+diff -urN linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/etc/shadow linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/etc/shadow
+--- linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/etc/shadow 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/etc/shadow 2005-12-24 20:29:42.067316648 +0000
+@@ -0,0 +1,11 @@
++root::10933:0:99999:7:::
++bin:*:10933:0:99999:7:::
++daemon:*:10933:0:99999:7:::
++adm:*:10933:0:99999:7:::
++lp:*:10933:0:99999:7:::
++sync:*:10933:0:99999:7:::
++shutdown:*:10933:0:99999:7:::
++halt:*:10933:0:99999:7:::
++uucp:*:10933:0:99999:7:::
++operator:*:10933:0:99999:7:::
++nobody:*:10933:0:99999:7:::
+diff -urN linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/lib/modules/2.4.25/modules.generic_string linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/lib/modules/2.4.25/modules.generic_string
+--- linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/lib/modules/2.4.25/modules.generic_string 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/lib/modules/2.4.25/modules.generic_string 2005-12-24 20:29:42.071316040 +0000
+@@ -0,0 +1 @@
++# module id=string
+diff -urN linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/lib/modules/2.4.25/modules.ieee1394map linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/lib/modules/2.4.25/modules.ieee1394map
+--- linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/lib/modules/2.4.25/modules.ieee1394map 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/lib/modules/2.4.25/modules.ieee1394map 2005-12-24 20:29:42.071316040 +0000
+@@ -0,0 +1 @@
++# ieee1394 module match_flags vendor_id model_id specifier_id version
+diff -urN linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/lib/modules/2.4.25/modules.isapnpmap linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/lib/modules/2.4.25/modules.isapnpmap
+--- linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/lib/modules/2.4.25/modules.isapnpmap 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/lib/modules/2.4.25/modules.isapnpmap 2005-12-24 20:29:42.079314824 +0000
+@@ -0,0 +1 @@
++# isapnp module cardvendor carddevice driver_data vendor function ...
+diff -urN linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/lib/modules/2.4.25/modules.parportmap linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/lib/modules/2.4.25/modules.parportmap
+--- linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/lib/modules/2.4.25/modules.parportmap 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/lib/modules/2.4.25/modules.parportmap 2005-12-24 20:29:42.079314824 +0000
+@@ -0,0 +1 @@
++# module pattern
+diff -urN linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/lib/modules/2.4.25/modules.pcimap linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/lib/modules/2.4.25/modules.pcimap
+--- linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/lib/modules/2.4.25/modules.pcimap 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/lib/modules/2.4.25/modules.pcimap 2005-12-24 20:29:42.080314672 +0000
+@@ -0,0 +1 @@
++# pci module vendor device subvendor subdevice class class_mask driver_data
+diff -urN linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/lib/modules/2.4.25/modules.pnpbiosmap linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/lib/modules/2.4.25/modules.pnpbiosmap
+--- linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/lib/modules/2.4.25/modules.pnpbiosmap 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/lib/modules/2.4.25/modules.pnpbiosmap 2005-12-24 20:29:42.080314672 +0000
+@@ -0,0 +1 @@
++# module id
+diff -urN linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/lib/modules/2.4.25/modules.usbmap linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/lib/modules/2.4.25/modules.usbmap
+--- linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/lib/modules/2.4.25/modules.usbmap 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/lib/modules/2.4.25/modules.usbmap 2005-12-24 20:29:42.080314672 +0000
+@@ -0,0 +1 @@
++# usb module match_flags idVendor idProduct bcdDevice_lo bcdDevice_hi bDeviceClass bDeviceSubClass bDeviceProtocol bInterfaceClass bInterfaceSubClass bInterfaceProtocol driver_info
+Binary files linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/sbin/iwconfig and linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/sbin/iwconfig differ
+Binary files linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/sbin/iwpriv and linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/sbin/iwpriv differ
+diff -urN linux-2.4.32/arch/mips/ar531x/README linux-2.4.32.new/arch/mips/ar531x/README
+--- linux-2.4.32/arch/mips/ar531x/README 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.4.32.new/arch/mips/ar531x/README 2005-12-24 20:29:42.101311480 +0000
+@@ -0,0 +1,68 @@
++Basic information for the AR531X Board Support Package
++
++This directory contains the "LBSP" -- Linux Board Support Package --
++for Linux on the Atheros AR531X Wireless System-On-a-Chip. It is intended
++primarily as a building block for wireless products. At this time, the
++AR531X Linux BSP is experimental code, and is actively UNDER CONSTRUCTION.
++
++Some components that are supported by this LBSP along with a standard 2.4
++Linux MIPS kernel include
++ R4Kc CPU
++ instruction and data caches
++ SDRAM
++ flash (Macronix, AMD, STS, etc.)
++ 16550 serial port
++ ethernet MACs
++ ethernet PHY or PHY Switch (RealTek, Kendin, Marvell)
++ General-Purpose I/O pins
++ kernel debugging with kgdb
++
++This LBSP code does NOT include drivers for the wireless components of the
++chip/boards! Drivers for those components may be distributed separately.
++In particular, the MADWiFi project under SourceForge supports (not yet!)
++wireless functions on the AR531X chipset. See
++ http://www.sourceforge.net/projects/madwifi
++
++Files included in this BSP:
++ae531xlnx.c - Linux-specific portions of the ethernet driver
++ae531xmac.c - OS-independent AR531X ethernet MAC code
++ae531xmac.h - OS-independent AR531X ethernet MAC software definitions
++ae531xreg.h - OS-independent AR531X ethernet MAC hardware definitions
++ar531x.h - OS-independent AR531X system hardware definitions
++ar531xlnx.h - Linux-specific AR531X system definitions and externs
++defconfig-ar531x - Default Linux configuration file
++intr_recv.S - Linux interrupt "glue" code
++ar531xirq.c - Linux Interrupt Request management
++Makefile - Linux makefile
++mvPhy.c - OS-independent ethernet PHY code for Marvell Switch
++mvPhy.h - OS-independent ethernet PHY definitions for Marvell Switch
++ar531xprom.c - Linux prom "glue" code
++ar531xsetup.c - Linux startup code
++ar531xdbg_io.c - Support for kgdb-based debugging and for EARLY_PRINTK_HACK
++ar531xproc.c - Pseudo-device driver for /proc/ar531x device
++ar531xgpio.c - Support for General Purpose I/O pins
++ar531xwmacsl.c - Wireless MAC Support Layer
++
++Additional files, distributed with the BSP:
++README - This file
++README.BUILD - Instructions for building a linux kernel from source
++README.EXECUTE - Instructions for testing your linux kernel
++README.RAMDISK - Instructions for building a root ramdisk image
++
++ramdisk.gz - A binary ramdisk image, suitable for use with AR531X.
++DIFFS - Directory that contains "patch" files (See README.BUILD)
++
++
++There are several ways to boot a vmlinux image on an AR531X board:
++ -You can boot in over ethernet from the vxWorks bootrom, which is preloaded
++ on all Atheros boards
++ -You can use an ICE (e.g. VisionICE) to load the vmlinux image. You will
++ need appropriate register initialization (e.g. AP30.ini file)
++ -You can use the eCos RedBoot bootrom loader. This is a full-featured
++ bootrom which as been ported to AR531x. It can boot vmlinux over ethernet
++ or from flash. Source code is available from Atheros.
++
++Please send comments, corrections, complaints, criticisms, suggestions,
++enhancements, requests, or any other reasonable communications regarding
++this effort, to "linux@atheros.com". Your email will be received by a
++couple of engineers, and redirected as appropriate.
+diff -urN linux-2.4.32/arch/mips/ar531x/README.BUILD linux-2.4.32.new/arch/mips/ar531x/README.BUILD
+--- linux-2.4.32/arch/mips/ar531x/README.BUILD 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.4.32.new/arch/mips/ar531x/README.BUILD 2005-12-24 20:29:42.101311480 +0000
+@@ -0,0 +1,47 @@
++ How to BUILD a linux kernel for an AR531X system
++
++It is expected that you will build Linux on an existing Linux system, which
++has all of the standard Linux tools.
++
++01) Obtain a MIPS BigEndian ELF gcc-compatible toolchain. For example,
++ if you're cross-compiling on a x86 Linux system, you could use:
++ ftp://ftp.mips.com/pub/tools/software/sde-for-linux/sdelinux-5.01-4eb.i386.rpm
++
++02) Obtain the latest working MIPS Linux kernel
++ cvs -d :pserver:cvs@ftp.linux-mips.org:/home/cvs login (password "cvs")
++ cvs -d :pserver:cvs@ftp.linux-mips.org:/home/cvs co -r linux_2_4 linux
++
++ Now "cd linux". The remainder of these instructions assume
++ that you are in the linux directory.
++
++03) Place the contents of this directory at arch/mips/ar531x.
++
++04) Use the patch command to patch generic linux files according
++ to the DIFFS directory
++ for i in arch/mips/ar531x/DIFFS/*.diff
++ do
++ patch -p1 < $i
++ done
++ NOTE: This version of the AR531X Linux BSP was tested with
++ MIPS Linux 2.4.22 as of 11/14/03. If you use a different
++ (e.g. more recent) version of Linux source, you may need to
++ resolve some minor patch and compilation issues.
++
++05) Set up a RAMDISK image.
++ See the instructions in README.RAMDISK.
++
++06) Set up a linux configuration using ar531x/defconfig-ar531x.
++ cp arch/mips/ar531x/defconfig-ar531x .config
++ make oldconfig (answer all questions that are asked)
++ NOTE: For development/debug purposes, you may want to
++ enable CONFIG_RUNTIME_DEBUG and CONFIG_KGDB.
++
++07) Make dependencies.
++ make dep
++
++08) Build the linux kernel
++ make
++
++09) The linux image you just built is in vmlinux.
++ See instructions in README.EXECUTE to run your vmlinux
++ image on an AP531X-based board.
+diff -urN linux-2.4.32/arch/mips/ar531x/README.EXECUTE linux-2.4.32.new/arch/mips/ar531x/README.EXECUTE
+--- linux-2.4.32/arch/mips/ar531x/README.EXECUTE 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.4.32.new/arch/mips/ar531x/README.EXECUTE 2005-12-24 20:29:42.101311480 +0000
+@@ -0,0 +1,23 @@
++ How to EXECUTE a linux image on an AR531X system
++
++There are currently three ways to run you vmlinux image:
++ 1) Load it using the vxWorks bootrom that is supplied with the board.
++ You can load it over ethernet or from the TFFS file system, if you
++ have sufficient flash to store the image.
++ 2) Load it using an ICE (e.g. VisionICE).
++ 3) Use a bootrom loader, such as eCos RedBoot.
++
++After you have booted linux:
++ By default, the root filesystem on ramdisk is read-only.
++ To make it writable, use "mount -o remount w /".
++
++ The user-level commands are slightly non-standard, as they
++ are based on "busybox".
++
++ The "wget" command is included. You can use wget to fetch
++ files from any ftp server. So, for instance, you can fetch
++ a kernel module and then "insmod" it.
++
++Note that the standard source-level kernel debugger, kgdb, works well
++over the serial line with this port. We use kgdb and the kgdb_demux perl
++script -- available over the www -- for debugging.
+diff -urN linux-2.4.32/arch/mips/ar531x/README.VERSION linux-2.4.32.new/arch/mips/ar531x/README.VERSION
+--- linux-2.4.32/arch/mips/ar531x/README.VERSION 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.4.32.new/arch/mips/ar531x/README.VERSION 2005-12-24 20:29:42.101311480 +0000
+@@ -0,0 +1 @@
++Source release last modified: 12/16/03
+diff -urN linux-2.4.32/arch/mips/config-shared.in linux-2.4.32.new/arch/mips/config-shared.in
+--- linux-2.4.32/arch/mips/config-shared.in 2005-12-24 16:11:21.000000000 +0000
++++ linux-2.4.32.new/arch/mips/config-shared.in 2005-12-24 21:33:42.804435856 +0000
+@@ -31,6 +31,7 @@
+ dep_bool 'Support for Alchemy PB1000 board' CONFIG_MIPS_PB1000 $CONFIG_MIPS32
+ dep_bool 'Support for Alchemy PB1100 board' CONFIG_MIPS_PB1100 $CONFIG_MIPS32
+ dep_bool 'Support for Alchemy PB1500 board' CONFIG_MIPS_PB1500 $CONFIG_MIPS32
++dep_bool 'Support for Atheros AR5312/AR2312 WiSoC (EXPERIMENTAL)' CONFIG_AR531X $CONFIG_AR531X $CONFIG_EXPERIMENTAL
+ dep_bool 'Support for Alchemy PB1550 board' CONFIG_MIPS_PB1550 $CONFIG_MIPS32
+ dep_bool 'Support for Alchemy PB1200 board' CONFIG_MIPS_PB1200 $CONFIG_MIPS32
+ dep_bool 'Support for Alchemy Hydrogen3 board' CONFIG_MIPS_HYDROGEN3 $CONFIG_MIPS32
+@@ -196,7 +197,7 @@
+ bool ' Support for ZBbus profiling' CONFIG_SIBYTE_TBPROF
+
+ if [ "$CONFIG_SIBYTE_SWARM" = "y" -o \
+- "$CONFIG_SIBYTE_LITTLESUR" = "y" -o \
++O5B "$CONFIG_SIBYTE_LITTLESUR" = "y" -o \
+ "$CONFIG_SIBYTE_PTSWARM" = "y" -o \
+ "$CONFIG_SIBYTE_CARMEL" = "y" ]; then
+ define_bool CONFIG_SIBYTE_GENBUS_IDE y
+@@ -239,6 +240,43 @@
+ define_bool CONFIG_NONCOHERENT_IO y
+ define_bool CONFIG_PC_KEYB y
+ fi
++if [ "$CONFIG_AR531X" = "y" ]; then
++ define_bool CONFIG_IRQ_CPU y
++ define_bool CONFIG_CPU_VR4100 y
++ define_bool CONFIG_SERIAL y
++ define_bool CONFIG_NEW_IRQ y
++ define_bool CONFIG_NEW_TIME_C y
++ define_bool CONFIG_AR5312
++ define_bool CONFIG_NONCOHERENT_IO y
++ bool 'Enable early printk hack' CONFIG_EARLY_PRINTK_HACK
++ define_bool CONFIG_SCSI n
++ mainmenu_option next_comment
++ comment 'Board selection'
++ choice 'Board type' \
++ "UNKNOWN CONFIG_APUNKNOWN \
++ AP30 CONFIG_AP30 \
++ AP31 CONFIG_AP31 \
++ AP33 CONFIG_AP33 \
++ AP38 CONFIG_AP38 \
++ AP43 CONFIG_AP43 \
++ AP48 CONFIG_AP48" AP30
++ if [ "$CONFIG_AP30" = "y" ]; then
++ define_int CONFIG_MTD_PHYSMAP_BUSWIDTH 2
++ fi
++ if [ "$CONFIG_AP33" = "y" ]; then
++ define_int CONFIG_MTD_PHYSMAP_BUSWIDTH 1
++ fi
++ if [ "$CONFIG_AP38" = "y" ]; then
++ define_int CONFIG_MTD_PHYSMAP_BUSWIDTH 1
++ fi
++ if [ "$CONFIG_AP43" = "y" ]; then
++ define_int CONFIG_MTD_PHYSMAP_BUSWIDTH 1
++ fi
++ if [ "$CONFIG_AP48" = "y" ]; then
++ define_int CONFIG_MTD_PHYSMAP_BUSWIDTH 1
++ fi
++ endmenu
++fi
+ if [ "$CONFIG_CASIO_E55" = "y" ]; then
+ define_bool CONFIG_IRQ_CPU y
+ define_bool CONFIG_NONCOHERENT_IO y
+diff -urN linux-2.4.32/arch/mips/kernel/setup.c linux-2.4.32.new/arch/mips/kernel/setup.c
+--- linux-2.4.32/arch/mips/kernel/setup.c 2005-12-24 16:08:53.000000000 +0000
++++ linux-2.4.32.new/arch/mips/kernel/setup.c 2005-12-24 21:28:51.779678344 +0000
+@@ -494,6 +494,7 @@
+ void hp_setup(void);
+ void au1x00_setup(void);
+ void frame_info_init(void);
++ void ar531x_setup(void);
+
+ frame_info_init();
+ #if defined(CONFIG_BLK_DEV_FD) || defined(CONFIG_BLK_DEV_FD_MODULE)
+@@ -691,6 +692,12 @@
+ pmc_yosemite_setup();
+ break;
+ #endif
++
++#ifdef CONFIG_AR531X
++ case MACH_GROUP_AR531X:
++ ar531x_setup();
++ break;
++#endif
+ default:
+ panic("Unsupported architecture");
+ }
+diff -urN linux-2.4.32/arch/mips/Makefile linux-2.4.32.new/arch/mips/Makefile
+--- linux-2.4.32/arch/mips/Makefile 2005-12-24 16:09:51.000000000 +0000
++++ linux-2.4.32.new/arch/mips/Makefile 2005-12-24 21:28:51.780678192 +0000
+@@ -725,6 +725,12 @@
+ LOADADDR += 0x80020000
+ endif
+
++ifdef CONFIG_AR531X
++SUBDIRS += arch/mips/ar531x
++LIBS += arch/mips/ar531x/ar531x.o
++LOADADDR += 0x80002000
++endif
++
+ #
+ # Choosing incompatible machines durings configuration will result in
+ # error messages during linking. Select a default linkscript if
+diff -urN linux-2.4.32/drivers/mtd/chips/cfi_cmdset_0002.c linux-2.4.32.new/drivers/mtd/chips/cfi_cmdset_0002.c
+--- linux-2.4.32/drivers/mtd/chips/cfi_cmdset_0002.c 2004-11-17 11:54:21.000000000 +0000
++++ linux-2.4.32.new/drivers/mtd/chips/cfi_cmdset_0002.c 2005-12-24 21:28:51.795675912 +0000
+@@ -510,7 +510,7 @@
+ or tells us why it failed. */
+ dq6 = CMD(1<<6);
+ dq5 = CMD(1<<5);
+- timeo = jiffies + (HZ/1000); /* setting timeout to 1ms for now */
++ timeo = jiffies + (HZ/1000) + 1; /* setting timeout to 1ms for now */
+
+ oldstatus = cfi_read(map, adr);
+ status = cfi_read(map, adr);
+@@ -535,12 +535,14 @@
+ if( (status & dq5) == dq5 ) {
+ /* When DQ5 raises, we must check once again
+ if DQ6 is toggling. If not, the erase has been
+- completed OK. If not, reset chip. */
++ completed OK. But if so, reset chip. */
+ oldstatus = cfi_read(map, adr);
+ status = cfi_read(map, adr);
+
+ if ( (oldstatus & 0x00FF) == (status & 0x00FF) ) {
++#if 0
+ printk(KERN_WARNING "Warning: DQ5 raised while program operation was in progress, however operation completed OK\n" );
++#endif
+ } else {
+ /* DQ5 is active so we can do a reset and stop the erase */
+ cfi_write(map, CMD(0xF0), chip->start);
+diff -urN linux-2.4.32/drivers/mtd/chips/jedec_probe.c linux-2.4.32.new/drivers/mtd/chips/jedec_probe.c
+--- linux-2.4.32/drivers/mtd/chips/jedec_probe.c 2003-06-13 15:51:34.000000000 +0100
++++ linux-2.4.32.new/drivers/mtd/chips/jedec_probe.c 2005-12-24 21:28:51.797675608 +0000
+@@ -900,7 +900,16 @@
+ NumEraseRegions: 1,
+ regions: {ERASEINFO(0x01000,256),
+ }
+- }
++ }, {
++ mfr_id: MANUFACTURER_SST,
++ dev_id: SST39LF160,
++ name: "SST 39LF160",
++ DevSize: SIZE_2MiB,
++ CmdSet: P_ID_AMD_STD,
++ NumEraseRegions: 1,
++ regions: {ERASEINFO(0x01000,512),
++ }
++ }
+ };
+
+
+diff -urN linux-2.4.32/drivers/mtd/Config.in linux-2.4.32.new/drivers/mtd/Config.in
+--- linux-2.4.32/drivers/mtd/Config.in 2003-06-13 15:51:34.000000000 +0100
++++ linux-2.4.32.new/drivers/mtd/Config.in 2005-12-24 21:28:51.803674696 +0000
+@@ -14,6 +14,9 @@
+ dep_tristate ' MTD partitioning support' CONFIG_MTD_PARTITIONS $CONFIG_MTD
+ dep_tristate ' MTD concatenating support' CONFIG_MTD_CONCAT $CONFIG_MTD
+ dep_tristate ' RedBoot partition table parsing' CONFIG_MTD_REDBOOT_PARTS $CONFIG_MTD_PARTITIONS
++ if [ "$CONFIG_MTD_END_RESERVED" != "" ]; then
++ define_int CONFIG_MTD_END_RESERVED $CONFIG_MTD_END_RESERVED
++ fi
+ dep_tristate ' Command line partition table parsing' CONFIG_MTD_CMDLINE_PARTS $CONFIG_MTD_PARTITIONS
+ if [ "$CONFIG_ARM" = "y" ]; then
+ dep_tristate ' ARM Firmware Suite partition parsing' CONFIG_MTD_AFS_PARTS $CONFIG_MTD_PARTITIONS
+diff -urN linux-2.4.32/drivers/mtd/maps/physmap.c linux-2.4.32.new/drivers/mtd/maps/physmap.c
+--- linux-2.4.32/drivers/mtd/maps/physmap.c 2003-06-13 15:51:34.000000000 +0100
++++ linux-2.4.32.new/drivers/mtd/maps/physmap.c 2005-12-24 21:28:51.811673480 +0000
+@@ -80,12 +80,18 @@
+ };
+
+ #ifdef CONFIG_MTD_PARTITIONS
+-#ifdef CONFIG_MTD_CMDLINE_PARTS
++#if defined(CONFIG_MTD_CMDLINE_PARTS) || defined(CONFIG_MTD_REDBOOT_PARTS)
+ static struct mtd_partition *mtd_parts = 0;
+ static int mtd_parts_nb = 0;
+ #else
+ static struct mtd_partition physmap_partitions[] = {
+ /* Put your own partition definitions here */
++ {
++ name: "rootfs",
++ size: 0x000e0000,
++ offset: 0x000f0000,
++ /* Allow file system to be mounted for writing */
++ }
+ #if 0
+ {
+ name: "bootROM",
+@@ -138,6 +144,22 @@
+
+ add_mtd_device(mymtd);
+ #ifdef CONFIG_MTD_PARTITIONS
++#ifdef CONFIG_MTD_REDBOOT_PARTS
++ {
++ extern int parse_redboot_partitions(struct mtd_info *master,
++ struct mtd_partition **pparts);
++
++ struct mtd_partition *rb_parts = 0;
++ int rb_parts_nb = 0;
++
++ rb_parts_nb = parse_redboot_partitions(mymtd, &rb_parts);
++ if (rb_parts_nb > 0) {
++ printk(KERN_NOTICE
++ "Using redboot flash partitioning");
++ add_mtd_partitions (mymtd, rb_parts, rb_parts_nb);
++ }
++ }
++#endif
+ #ifdef CONFIG_MTD_CMDLINE_PARTS
+ mtd_parts_nb = parse_cmdline_partitions(mymtd, &mtd_parts,
+ "phys");
+@@ -147,7 +169,8 @@
+ "Using command line partition definition\n");
+ add_mtd_partitions (mymtd, mtd_parts, mtd_parts_nb);
+ }
+-#else
++#endif
++#if !defined(CONFIG_MTD_CMDLINE_PARTS) && !defined(CONFIG_MTD_REDBOOT_PARTS)
+ if (NUM_PARTITIONS != 0)
+ {
+ printk(KERN_NOTICE
+diff -urN linux-2.4.32/drivers/mtd/redboot.c linux-2.4.32.new/drivers/mtd/redboot.c
+--- linux-2.4.32/drivers/mtd/redboot.c 2001-11-09 22:01:22.000000000 +0000
++++ linux-2.4.32.new/drivers/mtd/redboot.c 2005-12-24 21:28:51.821671960 +0000
+@@ -51,8 +51,14 @@
+ return -ENOMEM;
+
+ /* Read the start of the last erase block */
+- ret = master->read(master, master->size - master->erasesize,
++ {
++ u_int32_t part_table_start = master->size - master->erasesize;
++#if defined(CONFIG_MTD_END_RESERVED)
++ part_table_start -= CONFIG_MTD_END_RESERVED;
++#endif
++ ret = master->read(master, part_table_start,
+ PAGE_SIZE, &retlen, (void *)buf);
++ }
+
+ if (ret)
+ goto out;
+diff -urN linux-2.4.32/drivers/net/Config.in linux-2.4.32.new/drivers/net/Config.in
+--- linux-2.4.32/drivers/net/Config.in 2005-12-24 16:16:53.000000000 +0000
++++ linux-2.4.32.new/drivers/net/Config.in 2005-12-24 21:28:51.856666640 +0000
+@@ -30,6 +30,8 @@
+ comment 'Ethernet (10 or 100Mbit)'
+ bool 'Ethernet (10 or 100Mbit)' CONFIG_NET_ETHERNET
+ if [ "$CONFIG_NET_ETHERNET" = "y" ]; then
++ define_bool CONFIG_VENETDEV n
++ define_bool CONFIG_MARVELL_ENET_PHY y
+ if [ "$CONFIG_ARM" = "y" ]; then
+ dep_bool ' ARM EBSA110 AM79C961A support' CONFIG_ARM_AM79C961A $CONFIG_ARCH_EBSA110
+ tristate ' Cirrus Logic CS8900A support' CONFIG_ARM_CIRRUS
+diff -urN linux-2.4.32/drivers/net/wireless/Config.in linux-2.4.32.new/drivers/net/wireless/Config.in
+--- linux-2.4.32/drivers/net/wireless/Config.in 2004-11-17 11:54:21.000000000 +0000
++++ linux-2.4.32.new/drivers/net/wireless/Config.in 2005-12-24 21:28:51.898660256 +0000
+@@ -38,7 +38,8 @@
+
+ # yes, this works even when no drivers are selected
+ if [ "$CONFIG_ISA" = "y" -o "$CONFIG_PCI" = "y" -o \
+- "$CONFIG_ALL_PPC" = "y" -o "$CONFIG_PCMCIA" != "n" ]; then
++ "$CONFIG_ALL_PPC" = "y" -o "$CONFIG_PCMCIA" != "n" -o \
++ "$CONFIG_NET_WIRELESS" = "y" ]; then
+ define_bool CONFIG_NET_WIRELESS y
+ else
+ define_bool CONFIG_NET_WIRELESS n
+diff -urN linux-2.4.32/include/asm-mips/atheros/ar531xbsp.h linux-2.4.32.new/include/asm-mips/atheros/ar531xbsp.h
+--- linux-2.4.32/include/asm-mips/atheros/ar531xbsp.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.4.32.new/include/asm-mips/atheros/ar531xbsp.h 2005-12-24 20:29:06.898663096 +0000
+@@ -0,0 +1,16 @@
++#ifndef __ASM_ATHEROS_BSP_SUPPORT_H
++#define __ASM_ATHEROS_BSP_SUPPORT_H
++/*
++ * These are definitions and functions provided by the bsp to support the
++ * AR5312 WiSoC running LSDK. For different BSP implementations, different
++ * BSP functions will be needed.
++ */
++
++extern unsigned int ar531x_sys_frequency(void);
++
++#ifdef CONFIG_KGDB
++extern void kgdbInit(void);
++extern int kgdbEnabled(void);
++#endif
++
++#endif /* __ASM_ATHEROS_BSP_SUPPORT_H */
+diff -urN linux-2.4.32/include/asm-mips/bootinfo.h linux-2.4.32.new/include/asm-mips/bootinfo.h
+--- linux-2.4.32/include/asm-mips/bootinfo.h 2005-12-24 16:08:53.000000000 +0000
++++ linux-2.4.32.new/include/asm-mips/bootinfo.h 2005-12-24 21:28:51.899660104 +0000
+@@ -37,6 +37,7 @@
+ #define MACH_GROUP_HP_LJ 20 /* Hewlett Packard LaserJet */
+ #define MACH_GROUP_LASAT 21
+ #define MACH_GROUP_TITAN 22 /* PMC-Sierra Titan */
++#define MACH_GROUP_AR531X 23 /* Atheros AR531X */
+
+ /*
+ * Valid machtype values for group unknown (low order halfword of mips_machtype)
+@@ -201,6 +202,17 @@
+ */
+ #define MACH_TITAN_YOSEMITE 1 /* PMC-Sierra Yosemite */
+
++/*
++ * Valid machtype for group MACH_GROUP_AR5312
++ */
++#define MACH_ATHEROS_UNUSED 0
++#define MACH_ATHEROS_AP30 1 /* AP30 */
++#define MACH_ATHEROS_AP33 2 /* AP33 */
++#define MACH_ATHEROS_AP38 3 /* AP38 */
++#define MACH_ATHEROS_AP43 4 /* AP43 */
++#define MACH_ATHEROS_AP48 5 /* AP48 */
++#define MACH_ATHEROS_PB32 6 /* PB32 */
++
+ #define CL_SIZE (256)
+
+ const char *get_system_type(void);
+diff -urN linux-2.4.32/include/asm-mips/serial.h linux-2.4.32.new/include/asm-mips/serial.h
+--- linux-2.4.32/include/asm-mips/serial.h 2005-01-19 14:10:12.000000000 +0000
++++ linux-2.4.32.new/include/asm-mips/serial.h 2005-12-24 21:28:51.901659800 +0000
+@@ -467,6 +467,11 @@
+ #define DDB5477_SERIAL_PORT_DEFNS
+ #endif
+
++#if defined(CONFIG_AR531X)
++#undef RS_TABLE_SIZE
++#define RS_TABLE_SIZE 1
++#endif
++
+ #define SERIAL_PORT_DFNS \
+ ATLAS_SERIAL_PORT_DEFNS \
+ AU1000_SERIAL_PORT_DEFNS \
+diff -urN linux-2.4.32/kernel/printk.c linux-2.4.32.new/kernel/printk.c
+--- linux-2.4.32/kernel/printk.c 2004-11-17 11:54:22.000000000 +0000
++++ linux-2.4.32.new/kernel/printk.c 2005-12-24 21:28:51.929655544 +0000
+@@ -384,6 +384,18 @@
+ _call_console_drivers(start_print, end, msg_level);
+ }
+
++#if CONFIG_EARLY_PRINTK_HACK
++void putDebugChar(char byte);
++static void emit_log_char(char c)
++{
++ if (c == '\n') {
++ putDebugChar('\r');
++ putDebugChar('\n');
++ } else {
++ putDebugChar(c);
++ }
++}
++#else
+ static void emit_log_char(char c)
+ {
+ LOG_BUF(log_end) = c;
+@@ -395,6 +407,7 @@
+ if (logged_chars < LOG_BUF_LEN)
+ logged_chars++;
+ }
++#endif
+
+ /*
+ * This is printk. It can be called from any context. We want it to work.
+@@ -700,3 +713,4 @@
+ tty->driver.write(tty, 0, msg, strlen(msg));
+ return;
+ }
++
diff --git a/openwrt/target/linux/linux-2.4/patches/ar531x/001-ar531x-ethernet.patch b/openwrt/target/linux/linux-2.4/patches/ar531x/001-ar531x-ethernet.patch
new file mode 100644
index 000000000..15dd777ec
--- /dev/null
+++ b/openwrt/target/linux/linux-2.4/patches/ar531x/001-ar531x-ethernet.patch
@@ -0,0 +1,4890 @@
+diff -urN linux-2.4.32.new/arch/mips/ar531x/ae531xlnx.c linux-2.4.32.new-eth/arch/mips/ar531x/ae531xlnx.c
+--- linux-2.4.32.new/arch/mips/ar531x/ae531xlnx.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.4.32.new-eth/arch/mips/ar531x/ae531xlnx.c 2005-12-25 11:54:20.756273952 +0000
+@@ -0,0 +1,1534 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License. See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright © 2003 Atheros Communications, Inc., All Rights Reserved.
++ */
++
++/*
++ * Ethernet driver for Atheros' ae531x ethernet MAC.
++ * This is a fairly generic driver, but it's intended
++ * for use in typical Atheros products.
++ */
++
++#include <linux/config.h>
++#include <linux/types.h>
++#include <linux/delay.h>
++#include <linux/netdevice.h>
++#include <linux/etherdevice.h>
++#include <linux/init.h>
++#include <linux/skbuff.h>
++#include <asm/io.h>
++
++#include "ar531xlnx.h"
++#include "ae531xreg.h"
++#include "ae531xmac.h"
++
++/*
++ * A word about CONFIG_VENETDEV: It's intended to support two
++ * "virtualized ethernet devices" that share a single underlying MAC.
++ * To upper layers, it appears that the hardware supports two MACs,
++ * with enet0 used for LAN ports and enet1 used for a WAN port. This
++ * is useful, for instance, when building a 5-port router on hardware
++ * that uses only one of the AR5312's ethernet MACs.
++ *
++ * Virtualization is accomplished through trickery at the ethernet
++ * PHY layer. We use PHY hardware to determine which port a packet
++ * was received on, and in order to direct a packet to a particular
++ * port or set of ports.
++ *
++ * The code is mostly written to be generalized to more than two
++ * virtual devices; but it's intended for one multi-port LAN enet
++ * device and one single-port WAN enet device.
++ */
++
++#define AE531X_LAN_PORT 0
++#ifdef CONFIG_VENETDEV
++#define AE531X_DEV_PER_MAC 2
++#define AE531X_WAN_PORT 1
++#else
++#define AE531X_DEV_PER_MAC 1
++#endif
++
++
++/*
++ * ae531x_MAC_state contains driver-specific linux-specific per-MAC information.
++ * The OSinfo member of ae531x_MAC_t points to one of these.
++ */
++typedef struct ae531x_MAC_state {
++ int irq;
++ struct tq_struct restart_task;
++ struct net_device_stats stats;
++ struct ae531x_dev_sw_state *dev_sw_state[AE531X_DEV_PER_MAC];
++ int primary_dev;
++ ae531x_MAC_t MACInfo; /* hardware state */
++} ae531x_MAC_state_t;
++
++/*
++ * ae531x_dev_sw_state contains driver-specific linux-specific per-device
++ * information. The net_device priv member points to one of these, and
++ * this structure contains a pointer to the associated MAC information.
++ * In the case of CONFIG_VENETDEV, each virtual device has its own
++ * ae531x_dev_sw_state, and virtual devices that share a physical MAC
++ * point to the same ae531x_MAC_state.
++ */
++typedef struct ae531x_dev_sw_state {
++ int enetUnit; /* system unit number "eth%d" */
++ int unit_on_MAC; /* MAC-relative unit number */
++ struct net_device *dev;
++ ae531x_MAC_state_t *MAC_state; /* underlying MAC hw/sw state */
++#ifdef CONFIG_VENETDEV
++ BOOL isLAN; /* 0-->WAN; 1-->LAN */
++#endif
++} ae531x_dev_sw_state_t;
++
++/*
++ * Driver-independent linux-specific per-ethernet device software information.
++ * Regarding CONFIG_VENETDEV: If a system has 2 physical MACs, and each
++ * physical MAC has 2 virtual ethernet devices (one for LAN and one for WAN),
++ * then there are a total of 4 ethernet devices.
++ */
++static struct net_device *ae531x_MAC_dev[AR531X_NUM_ENET_MAC * AE531X_DEV_PER_MAC];
++
++/* Driver-dependent per-MAC information */
++static ae531x_MAC_state_t per_MAC_info[AR531X_NUM_ENET_MAC];
++
++/*
++ * Receive buffers need enough room to hold the following:
++ * 1) a max MTU-sized packet.
++ * 2) space for an ethernet header
++ * 3) room at the beginning of the receive buffer in order
++ * to facilitate cooperating drivers that need to PREpend
++ * data.
++ * 4) Depending on configuration, we may need some additional
++ * room at the END of the rx buffer for phy-supplied
++ * trailers (if any). (c.f. CONFIG_VENETDEV)
++ *
++ * The DMA engine insists on 32-bit aligned RX buffers.
++ * TBDXXX: With current code, the IP stack ends up looking
++ * at misaligned headers with word operations. The misaligned
++ * reads are software-emulated via handle_adel_int. We'd
++ * rather align the buffers on a 16-bit boundary, but the
++ * DMA engine doesn't permit it???
++ */
++
++#ifdef CONFIG_VLAN_8021Q
++#define ETH_MAX_MTU 1522
++#define HLEN 18
++#else
++#define ETH_MAX_MTU 1518
++#define HLEN ETH_HLEN
++#endif
++
++#define AE531X_RX_BUF_SIZE \
++ (((2 + RXBUFF_RESERVE + HLEN + ETH_MAX_MTU + PHY_TRAILER_SIZE) + 3) & ~3)
++
++/* Forward references to local functions */
++static void ae531x_TxReap(ae531x_MAC_state_t *MAC_state);
++static int ae531x_phy_poll(void *data);
++static int ae531x_MAC_stop(struct net_device *dev);
++static int ae531x_MAC_open(struct net_device *dev);
++
++/* Global to track number of MACs */
++
++int ar531x_num_enet_macs;
++
++#undef DEBUG_VENETDEV
++#define AR531X_NAPI
++
++#if defined(CONFIG_VENETDEV) && defined(DEBUG_VENETDEV)
++static int cloned_counter;
++static int expand_counter;
++static int both_counter;
++#endif
++
++#ifdef AR531X_NAPI
++/*******************************************************************************
++* ae531x_MAC_poll checks for received packets, and sends data
++* up the stack.
++*/
++int
++ae531x_MAC_poll(struct net_device *dev, int *budget)
++{
++ struct sk_buff *skb;
++ struct sk_buff *newskb;
++ char *rxBufp;
++ int unused_length;
++ VIRT_ADDR rxDesc;
++ int length;
++ ae531x_dev_sw_state_t *dev_sw_state;
++ ae531x_MAC_state_t *MAC_state;
++ ae531x_MAC_t *MACInfo;
++ u32 cmdsts;
++ int rx_limit;
++ int rx_received;
++ int rxDescCount;
++ struct net_device *rxdev;
++ int early_stop;
++ int retval;
++#ifdef CONFIG_VENETDEV
++ int i;
++#endif
++
++ ARRIVE();
++
++ dev_sw_state = (ae531x_dev_sw_state_t *)dev->priv;
++ MAC_state = dev_sw_state->MAC_state;
++ MACInfo = &MAC_state->MACInfo;
++ rx_limit = MAC_state->dev_sw_state[MAC_state->primary_dev]->dev->quota;
++ rx_received = 0;
++
++#ifdef CONFIG_VENETDEV
++ /*
++ * Non-primary devs don't explicitly get polled by the upper layers;
++ * rather, they rely on primary_dev polling to feed packets. But in
++ * order to keep netif_receive_skb happy, we need to temporarily put the
++ * net_devices into "polling mode". We pull them back out before
++ * leaving this function.
++ */
++ for (i=0; i<AE531X_DEV_PER_MAC; i++) {
++ if ((MAC_state->dev_sw_state[i]->dev) &&
++ (MAC_state->dev_sw_state[i]->unit_on_MAC != MAC_state->primary_dev)) {
++ netif_rx_schedule(MAC_state->dev_sw_state[i]->dev);
++ }
++ }
++#endif
++ rxDescCount = 0;
++
++ early_stop = 0;
++ do {
++ for(;;) {
++ // ae531x_AckIntr(MACInfo, (DmaIntRxCompleted | DmaIntRxNoBuffer));
++
++ rxDesc = MACInfo->rxQueue.curDescAddr;
++ cmdsts = AE531X_DESC_STATUS_GET(KSEG1ADDR(rxDesc));
++
++ AE531X_PRINT(AE531X_DEBUG_RX,
++ ("examine rxDesc %p with cmdsts=0x%x\n",
++ (void *)rxDesc, cmdsts));
++
++ if (cmdsts & DescOwnByDma) {
++ /* There's nothing left to process in the RX ring */
++ goto rx_all_done;
++ }
++
++ rxDescCount++;
++
++ AE531X_CONSUME_DESC((&MACInfo->rxQueue));
++
++ // A_DATA_CACHE_INVAL(rxDesc, AE531X_DESC_SIZE);
++
++ /* Process a packet */
++ length = AE531X_DESC_STATUS_RX_SIZE(cmdsts) - ETH_CRC_LEN;
++ if ( (cmdsts & (DescRxFirst |DescRxLast | DescRxErrors)) ==
++ (DescRxFirst | DescRxLast) ) {
++ /* Descriptor status indicates "NO errors" */
++ skb = AE531X_DESC_SWPTR_GET(rxDesc);
++
++ /*
++ * Allocate a replacement skb.
++ * We want to get another buffer ready for Rx ASAP.
++ */
++ newskb = (struct sk_buff *)ae531x_rxbuf_alloc(MACInfo, &rxBufp, &unused_length);
++ if(newskb == NULL ) {
++ /*
++ * Give this descriptor back to the DMA engine,
++ * and drop the received packet.
++ */
++ MAC_state->stats.rx_dropped++;
++ AE531X_PRINT(AE531X_DEBUG_ERROR,
++ ("Can't allocate new skb\n"));
++ } else {
++ AE531X_DESC_BUFPTR_SET(rxDesc, rxBufp);
++ AE531X_DESC_SWPTR_SET(rxDesc, newskb);
++ }
++
++ AE531X_DESC_STATUS_SET(rxDesc, DescOwnByDma);
++ A_DATA_CACHE_FLUSH_INVAL(rxDesc, AE531X_DESC_SIZE);
++ // rxDesc = NULL; /* sanity -- cannot use rxDesc now */
++ sysWbFlush();
++
++ if (newskb == NULL) {
++ retval = 1;
++ goto rx_no_skbs;
++ } else {
++ /* Sync data cache w.r.t. DMA */
++ // A_DATA_CACHE_INVAL(skb->data, length);
++
++#ifdef CONFIG_VENETDEV
++ /* Determine which associated device owns this rx buffer */
++ {
++ int fromLAN;
++
++ fromLAN = phyDetermineSource(skb->data, length);
++
++ if (fromLAN == -1) {
++ /*
++ * Could not determine source, so drop the packet
++ */
++ dev_kfree_skb(skb);
++ continue;
++ }
++
++ length -= PHY_TRAILER_SIZE;
++ if (fromLAN) {
++ dev_sw_state = MAC_state->dev_sw_state[AE531X_LAN_PORT];
++ } else {
++ dev_sw_state = MAC_state->dev_sw_state[AE531X_WAN_PORT];
++ }
++ }
++#endif
++ rxdev = dev_sw_state->dev;
++
++ if (rxdev == NULL) {
++ /*
++ * We received a packet for a virtual enet device
++ * that is no longer up. Ignore it.
++ */
++ dev_kfree_skb(skb);
++ continue;
++ }
++
++ /* Advance data pointer to show that there's data here */
++ skb_put(skb, length);
++ skb->protocol = eth_type_trans(skb, rxdev);
++ skb->dev = rxdev;
++ rxdev->last_rx = jiffies;
++ rxdev->quota--;
++
++ if (rx_limit-- < 0) {
++ early_stop=1;
++ /* We've done enough for now -- more later */
++ AE531X_PRINT(AE531X_DEBUG_RX_STOP,
++ ("Enet%d RX early stop. Quota=%d rxDescCount=%d budget=%d\n",
++ MACInfo->unit, dev->quota, rxDescCount, *budget));
++ }
++ rx_received++;
++
++ /* Send the data up the stack */
++ AE531X_PRINT(AE531X_DEBUG_RX,
++ ("Send data up stack: skb=%p data=%p length=%d\n",
++ (void *)skb, (void *)skb->data, length));
++
++ netif_receive_skb(skb);
++
++ MAC_state->stats.rx_packets++;
++ MAC_state->stats.rx_bytes += length;
++ }
++ } else {
++ /* Descriptor status indicates ERRORS */
++ MAC_state->stats.rx_errors++;
++
++ if (cmdsts & (DescRxRunt | DescRxLateColl)) {
++ AE531X_PRINT(AE531X_DEBUG_ERROR,
++ ("Runt | RX Late Collision Error\n"));
++ MAC_state->stats.collisions++;
++ }
++
++ if (cmdsts & DescRxLengthError) {
++ AE531X_PRINT(AE531X_DEBUG_ERROR,
++ ("RX Length Error\n"));
++ MAC_state->stats.rx_length_errors++;
++ }
++
++ if (cmdsts & DescRxCrc) {
++ AE531X_PRINT(AE531X_DEBUG_ERROR,
++ ("RX CRC Error\n"));
++ MAC_state->stats.rx_crc_errors++;
++ }
++
++ if (cmdsts & DescRxDribbling) {
++ AE531X_PRINT(AE531X_DEBUG_ERROR,
++ ("Dribbling Error\n"));
++ MAC_state->stats.rx_frame_errors++;
++ }
++
++ AE531X_PRINT(AE531X_DEBUG_ERROR,
++ ("Bad receive. rxDesc=%p cmdsts=0x%8.8x\n",
++ (void *)rxDesc, cmdsts));
++
++ /* Give this one back */
++ AE531X_DESC_STATUS_SET(rxDesc, DescOwnByDma);
++ A_DATA_CACHE_FLUSH_INVAL(rxDesc, AE531X_DESC_SIZE);
++ sysWbFlush();
++ }
++ }
++ } while ((!early_stop) &&
++ ae531x_ReadDmaReg(MACInfo, DmaStatus) & DmaIntRxCompleted);
++
++rx_all_done:
++ AE531X_PRINT(AE531X_DEBUG_RX,
++ ("rx done (%d)\n", rxDescCount));
++ *budget -= rxDescCount;
++
++ if (!early_stop) {
++ netif_rx_complete(dev);
++
++ ae531x_SetDmaReg(MACInfo, DmaIntrEnb,
++ DmaIeRxCompleted | DmaIeRxNoBuffer);
++ ae531x_WriteDmaReg(MACInfo, DmaRxPollDemand, 0);
++ }
++
++ retval = early_stop;
++
++rx_no_skbs:
++
++#ifdef CONFIG_VENETDEV
++ for (i=0; i<AE531X_DEV_PER_MAC; i++) {
++ if ((MAC_state->dev_sw_state[i]->dev) &&
++ (MAC_state->dev_sw_state[i]->unit_on_MAC !=
++ MAC_state->primary_dev)) {
++ netif_rx_complete(MAC_state->dev_sw_state[i]->dev);
++ }
++ }
++#endif
++
++ LEAVE();
++ return retval;
++}
++#endif
++
++#ifndef AR531X_NAPI
++/*******************************************************************************
++* ae531x_MAC_recv checks for received packets, and sends data
++* up the stack.
++*/
++static void
++ae531x_MAC_recv(struct net_device *dev)
++{
++ struct sk_buff *skb;
++ struct sk_buff *newskb;
++ char *rxBufp;
++ int unused_length;
++ VIRT_ADDR rxDesc;
++ int length;
++ ae531x_dev_sw_state_t *dev_sw_state;
++ ae531x_MAC_state_t *MAC_state;
++ ae531x_MAC_t *MACInfo;
++ u32 cmdsts;
++ int rx_limit;
++ int rx_received;
++ struct net_device *rxdev;
++ int retval;
++
++ ARRIVE();
++
++ dev_sw_state = (ae531x_dev_sw_state_t *)dev->priv;
++ MAC_state = dev_sw_state->MAC_state;
++ MACInfo = &MAC_state->MACInfo;
++ rx_limit = MAC_state->dev_sw_state[MAC_state->primary_dev]->dev->quota;
++ rx_received = 0;
++
++ for(;;) {
++ rxDesc = MACInfo->rxQueue.curDescAddr;
++ cmdsts = AE531X_DESC_STATUS_GET(KSEG1ADDR(rxDesc));
++
++ AE531X_PRINT(AE531X_DEBUG_RX,
++ ("examine rxDesc %p with cmdsts=0x%x\n",
++ (void *)rxDesc, cmdsts));
++
++ if (cmdsts & DescOwnByDma) {
++ /* There's nothing left to process in the RX ring */
++ break;
++ }
++
++ AE531X_CONSUME_DESC((&MACInfo->rxQueue));
++
++ // A_DATA_CACHE_INVAL(rxDesc, AE531X_DESC_SIZE);
++
++ /* Process a packet */
++ length = AE531X_DESC_STATUS_RX_SIZE(cmdsts) - ETH_CRC_LEN;
++ if ( (cmdsts & (DescRxFirst |DescRxLast | DescRxErrors)) ==
++ (DescRxFirst | DescRxLast) ) {
++ /* Descriptor status indicates "NO errors" */
++ skb = AE531X_DESC_SWPTR_GET(rxDesc);
++
++ /*
++ * Allocate a replacement skb.
++ * We want to get another buffer ready for Rx ASAP.
++ */
++ newskb = (struct sk_buff *)ae531x_rxbuf_alloc(MACInfo,
++ &rxBufp,
++ &unused_length);
++ if(newskb == NULL ) {
++ /*
++ * Give this descriptor back to the DMA engine,
++ * and drop the received packet.
++ */
++ MAC_state->stats.rx_dropped++;
++ AE531X_PRINT(AE531X_DEBUG_ERROR,
++ ("Can't allocate new skb\n"));
++ } else {
++ AE531X_DESC_BUFPTR_SET(rxDesc, rxBufp);
++ AE531X_DESC_SWPTR_SET(rxDesc, newskb);
++ }
++
++ AE531X_DESC_STATUS_SET(rxDesc, DescOwnByDma);
++ A_DATA_CACHE_FLUSH_INVAL(rxDesc, AE531X_DESC_SIZE);
++ sysWbFlush();
++
++ if (newskb == NULL) {
++ break;
++ } else {
++#ifdef CONFIG_VENETDEV
++ /* Determine which associated device owns this rx buffer */
++ {
++ int fromLAN;
++
++ fromLAN = phyDetermineSource(skb->data, length);
++
++ if (fromLAN == -1) {
++ /*
++ * Could not determine source, so drop the packet
++ */
++ dev_kfree_skb(skb);
++ continue;
++ }
++
++ length -= PHY_TRAILER_SIZE;
++ if (fromLAN) {
++ dev_sw_state =
++ MAC_state->dev_sw_state[AE531X_LAN_PORT];
++ } else {
++ dev_sw_state =
++ MAC_state->dev_sw_state[AE531X_WAN_PORT];
++ }
++ }
++#endif
++ rxdev = dev_sw_state->dev;
++
++ if (rxdev == NULL) {
++ /*
++ * We received a packet for a virtual enet device
++ * that is no longer up. Ignore it.
++ */
++ dev_kfree_skb(skb);
++ continue;
++ }
++
++ /* Advance data pointer to show that there's data here */
++ skb_put(skb, length);
++ skb->protocol = eth_type_trans(skb, rxdev);
++ skb->dev = rxdev;
++ rxdev->last_rx = jiffies;
++ rxdev->quota--;
++
++ rx_received++;
++
++ /* Send the data up the stack */
++ AE531X_PRINT(AE531X_DEBUG_RX,
++ ("Send data up stack: skb=%p data=%p length=%d\n",
++ (void *)skb, (void *)skb->data, length));
++
++ netif_rx(skb);
++
++ MAC_state->stats.rx_packets++;
++ MAC_state->stats.rx_bytes += length;
++ }
++ } else {
++ /* Descriptor status indicates ERRORS */
++ MAC_state->stats.rx_errors++;
++
++ if (cmdsts & (DescRxRunt | DescRxLateColl)) {
++ MAC_state->stats.collisions++;
++ }
++
++ if (cmdsts & DescRxLengthError) {
++ MAC_state->stats.rx_length_errors++;
++ }
++
++ if (cmdsts & DescRxCrc) {
++ MAC_state->stats.rx_crc_errors++;
++ }
++
++ if (cmdsts & DescRxDribbling) {
++ MAC_state->stats.rx_frame_errors++;
++ }
++
++ AE531X_PRINT(AE531X_DEBUG_ERROR,
++ ("Bad receive. rxDesc=%p cmdsts=0x%8.8x\n",
++ (void *)rxDesc, cmdsts));
++ }
++ }
++
++ LEAVE();
++ return;
++}
++#endif
++
++/*******************************************************************************
++* ae531x_restart stops all ethernet devices associated with a physical MAC,
++* then shuts down the MAC. Then it re-opens all devices that were in use.
++* TBDXXX: needs testing!
++*/
++static void
++ae531x_restart(void *data)
++{
++ ae531x_MAC_t *MACInfo = (ae531x_MAC_t *)data;
++ ae531x_MAC_state_t *MAC_state = (ae531x_MAC_state_t *)MACInfo->OSinfo;
++ struct net_device *saved_dev[AE531X_DEV_PER_MAC];
++ int i;
++
++ for (i=0; i<AE531X_DEV_PER_MAC; i++) {
++ if ((saved_dev[i] = MAC_state->dev_sw_state[i]->dev) != NULL) {
++ ae531x_MAC_stop(saved_dev[i]);
++ }
++ }
++
++ for (i=0; i<AE531X_DEV_PER_MAC; i++) {
++ if (saved_dev[i])
++ ae531x_MAC_open(saved_dev[i]);
++ }
++}
++
++/*******************************************************************************
++* ae531x_MAC_intr handle interrupts from an ethernet MAC.
++* It checks MAC status registers, and dispatches as appropriate.
++*/
++void
++ae531x_MAC_intr(int cpl, void *dev_id, struct pt_regs *regs)
++{
++ ae531x_MAC_state_t *MAC_state;
++ ae531x_MAC_t *MACInfo;
++ u32 regIsr;
++ u32 regImr;
++ u32 pendIntrs;
++ struct net_device * primary_dev;
++
++ ARRIVE();
++
++ MACInfo = (ae531x_MAC_t *)dev_id;
++ MAC_state = (ae531x_MAC_state_t *)MACInfo->OSinfo;
++ primary_dev = MAC_state->dev_sw_state[MAC_state->primary_dev]->dev;
++
++ for(;;) {
++ /* Clear any unhandled intr causes. */
++ ae531x_WriteDmaReg(MACInfo, DmaStatus, UnhandledIntrMask);
++
++ regIsr = ae531x_ReadDmaReg(MACInfo, DmaStatus);
++
++ regImr = ae531x_ReadDmaReg(MACInfo, DmaIntrEnb);
++ pendIntrs = regIsr & regImr;
++
++ AE531X_PRINT(AE531X_DEBUG_INT,
++ ("ethmac%d: intIsr=0x%8.8x intImr=0x%8.8x\n",
++ MACInfo->unit, regIsr, regImr));
++
++ if ((pendIntrs & DmaAllIntCauseMask) == 0)
++ break;
++
++ if ((pendIntrs & DmaIntRxCompleted) ||
++ (pendIntrs & DmaIntRxNoBuffer)) {
++#ifdef AR531X_NAPI
++ if (netif_rx_schedule_prep(primary_dev)) {
++ ae531x_ClearDmaReg(MACInfo,
++ DmaIntrEnb,
++ DmaIeRxCompleted | DmaIeRxNoBuffer);
++ ae531x_AckIntr(MACInfo,
++ DmaIntRxCompleted | DmaIntRxNoBuffer);
++ (void)ae531x_ReadDmaReg(MACInfo, DmaIntrEnb);
++ __netif_rx_schedule(primary_dev);
++ } else {
++ AE531X_PRINT(AE531X_DEBUG_ERROR,
++ ("%s: Interrupt (0x%8.8x/0x%8.8x) while in poll. regs@%p, pc=%p, ra=%p\n",
++ __FILE__,
++ regIsr,
++ ae531x_ReadDmaReg(MACInfo, DmaIntrEnb),
++ (void *)regs,
++ (void *)regs->cp0_epc,
++ (void *)regs->regs[31]));
++ ae531x_ClearDmaReg(MACInfo,
++ DmaIntrEnb,
++ DmaIeRxCompleted | DmaIeRxNoBuffer);
++ ae531x_AckIntr(MACInfo,
++ DmaIntRxCompleted | DmaIntRxNoBuffer);
++ }
++#else
++ ae531x_MAC_recv(primary_dev);
++ ae531x_AckIntr(MACInfo,
++ DmaIntRxCompleted | DmaIntRxNoBuffer);
++#endif
++ }
++
++ if (pendIntrs &
++ (DmaIntTxStopped | DmaIntTxJabber | DmaIntTxUnderflow)) {
++ AE531X_PRINT(AE531X_DEBUG_ERROR,
++ ("ethmac%d: TX Error Intr (0x%x)\n",
++ MACInfo->unit, pendIntrs));
++ ae531x_AckIntr(MACInfo,
++ (DmaIntTxStopped | DmaIntTxJabber | DmaIntTxUnderflow));
++ }
++
++ if (pendIntrs & DmaIntBusError) {
++ AE531X_PRINT(AE531X_DEBUG_ERROR,
++ ("ethmac%d: DMA Bus Error Intr (0x%x)\n",
++ MACInfo->unit, pendIntrs));
++ ae531x_AckIntr(MACInfo, DmaIntBusError);
++ /* Reset the chip, if it's not already being done */
++ if (ae531x_IsInResetMode(MACInfo)) {
++ goto intr_done;
++ }
++ ae531x_BeginResetMode(MACInfo);
++ schedule_task(&MAC_state->restart_task);
++ }
++
++ if (pendIntrs & DmaIntRxStopped) {
++ AE531X_PRINT(AE531X_DEBUG_ERROR,
++ ("ethmac%d: RX Stopped Intr (0x%x)\n",
++ MACInfo->unit, pendIntrs));
++ ae531x_AckIntr(MACInfo, DmaIntRxStopped);
++ }
++ }
++
++ ae531x_DmaIntEnable(MACInfo);
++
++intr_done:
++ LEAVE();
++}
++
++/*******************************************************************************
++* ae531x_MAC_get_stats returns statistics for a specified device
++*/
++static struct net_device_stats*
++ae531x_MAC_get_stats(struct net_device *dev)
++{
++ ae531x_dev_sw_state_t *dev_sw_state;
++ ae531x_MAC_state_t *MAC_state;
++
++ ARRIVE();
++ dev_sw_state = (ae531x_dev_sw_state_t *)dev->priv;
++ MAC_state = dev_sw_state->MAC_state;
++
++ LEAVE();
++ return &MAC_state->stats;
++}
++
++#define AE531X_PHY_POLL_SECONDS 2
++
++/*******************************************************************************
++* ae531x_phy_poll periodically checks for changes in phy status
++* (e.g. dropped link).
++*/
++static int
++ae531x_phy_poll(void *data)
++{
++ ae531x_dev_sw_state_t *dev_sw_state = (ae531x_dev_sw_state_t *)data;
++ ae531x_MAC_t *MACInfo = &dev_sw_state->MAC_state->MACInfo;
++ int unit = dev_sw_state->enetUnit;
++
++#if defined(CONFIG_VENETDEV) && defined(DEBUG_VENETDEV)
++ int previous_cloned = 0;
++ int previous_expand = 0;
++ int previous_both = 0;
++#endif
++
++ daemonize();
++ reparent_to_init();
++ spin_lock_irq(&current->sigmask_lock);
++ sigemptyset(&current->blocked);
++ recalc_sigpending(current);
++ spin_unlock_irq(&current->sigmask_lock);
++
++ snprintf(current->comm, sizeof(current->comm), "%s",
++ dev_sw_state->dev->name);
++
++ for(;;) {
++ if (MACInfo->port_is_up) {
++ phyCheckStatusChange(unit);
++ }
++
++#if defined(CONFIG_VENETDEV) && defined(DEBUG_VENETDEV)
++ if (cloned_counter != previous_cloned) {
++ printk("Cloned Counter: %d (delta %d)\n",
++ cloned_counter, cloned_counter - previous_cloned);
++ previous_cloned = cloned_counter;
++ }
++ if (expand_counter != previous_expand) {
++ printk("Expand Counter: %d (delta %d)\n",
++ expand_counter, expand_counter - previous_expand);
++ previous_expand = expand_counter;
++ }
++ if (both_counter != previous_both) {
++ printk("Expand & Cloned Counter: %d (delta %d)\n",
++ both_counter, both_counter - previous_both);
++ previous_both = both_counter;
++ }
++#endif
++
++ set_current_state(TASK_UNINTERRUPTIBLE);
++ schedule_timeout(AE531X_PHY_POLL_SECONDS * HZ);
++ }
++
++ return 0;
++}
++
++
++/*******************************************************************************
++* ae531x_MAC_set_rx_mode is used to set the RX mode options, such as
++* promiscuous or multicast.
++*/
++static void
++ae531x_MAC_set_rx_mode(struct net_device *dev)
++{
++ ae531x_dev_sw_state_t *dev_sw_state = (ae531x_dev_sw_state_t *)dev->priv;
++ ae531x_MAC_state_t *MAC_state=dev_sw_state->MAC_state;
++ ae531x_MAC_t *MACInfo = &MAC_state->MACInfo;
++
++ if (dev->flags & IFF_PROMISC) {
++ ae531x_SetMacReg(MACInfo, MacControl, MacPromiscuousModeOn);
++ } else {
++ ae531x_ClearMacReg(MACInfo, MacControl, MacPromiscuousModeOn);
++ }
++
++ if (dev->flags & IFF_MULTICAST) {
++ ae531x_SetMacReg(MACInfo, MacControl, MacMulticastFilterOff);
++ } else {
++ ae531x_ClearMacReg(MACInfo, MacControl, MacMulticastFilterOff);
++ }
++}
++
++/*******************************************************************************
++* ae531x_MAC_open is the standard Linux open function. It puts
++* hardware into a known good state, allocates queues, starts
++* the phy polling task, and arranges for interrupts to be handled.
++*/
++static int
++ae531x_MAC_open(struct net_device *dev)
++{
++ ae531x_dev_sw_state_t *dev_sw_state;
++ ae531x_MAC_state_t *MAC_state;
++ ae531x_MAC_t *MACInfo;
++ int rv;
++ struct tq_struct *restart_task;
++ pid_t phy_poll_pid;
++
++ ARRIVE();
++
++ dev_sw_state = (ae531x_dev_sw_state_t *)dev->priv;
++ dev_sw_state->dev = dev;
++ MAC_state = dev_sw_state->MAC_state;
++ MACInfo = &MAC_state->MACInfo;
++
++ restart_task = &MAC_state->restart_task;
++ restart_task->routine = ae531x_restart;
++ restart_task->data = (void *)MACInfo;
++
++ AE531X_PRINT(AE531X_DEBUG_RESET,
++ ("ae531x_MAC_open eth%d ethmac%d macBase=0x%x dmaBase=0x%x irq=0x%x\n",
++ dev_sw_state->enetUnit,
++ MACInfo->unit,
++ MACInfo->macBase,
++ MACInfo->dmaBase,
++ MAC_state->irq));
++
++ if (!MACInfo->port_is_up) {
++ /* Bring MAC and PHY out of reset */
++ ae531x_reset(MACInfo);
++
++ /* Attach interrupt handler */
++ rv = request_irq(MAC_state->irq, ae531x_MAC_intr, SA_INTERRUPT,
++ "ae531x_MAC_intr", (void *)MACInfo);
++ if (rv < 0) {
++ AE531X_PRINT(AE531X_DEBUG_ERROR,
++ ("request_irq(0x%x) failed (%d)\n",
++ MAC_state->irq, rv));
++ goto open_failure;
++ }
++
++ /* Initialize PHY */
++ phySetup(MACInfo->unit, MACInfo->phyBase);
++
++ /* Start thread to poll for phy link status changes */
++ phy_poll_pid = kernel_thread(ae531x_phy_poll,
++ dev_sw_state,
++ CLONE_FS | CLONE_FILES);
++ if (phy_poll_pid < 0) {
++ AE531X_PRINT(AE531X_DEBUG_ERROR,
++ ("ethmac%d unable to start Phy Poll thread\n",
++ MACInfo->unit));
++ }
++
++ /* Allocate RX/TX Queues */
++ if (ae531x_AllocateQueues(MACInfo) < 0) {
++ AE531X_PRINT(AE531X_DEBUG_RESET, ("Queue allocation failed"));
++ free_irq(MAC_state->irq, (void *)MACInfo);
++ goto open_failure;
++ }
++
++ /* Initialize DMA and descriptors */
++ ae531x_DmaReset(MACInfo);
++
++ /* Initialize MAC */
++ ae531x_MACReset(MACInfo);
++
++ /* Set RX mode */
++ ae531x_MAC_set_rx_mode(dev);
++
++ /* Enable Receive/Transmit */
++ ae531x_EnableComm(MACInfo);
++
++ MAC_state->primary_dev = dev_sw_state->unit_on_MAC;
++ MACInfo->port_is_up = TRUE;
++ }
++
++ dev->trans_start = jiffies;
++
++ LEAVE();
++ return 0;
++
++open_failure:
++ LEAVE();
++ return -1;
++}
++
++/*
++ * Shut down MAC hardware.
++ */
++static void
++ae531x_MAC_shutdown(ae531x_MAC_state_t *MAC_state)
++{
++ ae531x_MAC_t *MACInfo;
++
++ MACInfo = &MAC_state->MACInfo;
++ MACInfo->port_is_up = FALSE;
++
++ /* Disable Receive/Transmit */
++ ae531x_DisableComm(MACInfo);
++
++ /* Disable Interrupts */
++ ae531x_DmaIntDisable(MACInfo);
++ sysWbFlush();
++ free_irq(MAC_state->irq, (void *)MACInfo);
++
++ /* Free Transmit & Receive skb's/descriptors */
++ ae531x_TxReap(MAC_state); /* one last time */
++ ae531x_FreeQueues(MACInfo);
++}
++
++/*******************************************************************************
++* ae531x_MAC_stop is the standard Linux stop function. It undoes
++* everything set up by ae531x_MAC_open.
++*/
++static int
++ae531x_MAC_stop(struct net_device *dev)
++{
++ ae531x_dev_sw_state_t *dev_sw_state;
++ ae531x_MAC_state_t *MAC_state;
++ ae531x_MAC_t *MACInfo;
++ int i;
++
++ ARRIVE();
++
++ dev_sw_state = (ae531x_dev_sw_state_t *)dev->priv;
++ MAC_state = dev_sw_state->MAC_state;
++ MACInfo = &MAC_state->MACInfo;
++
++ for (i=0; i<AE531X_DEV_PER_MAC; i++) {
++ if ((MAC_state->dev_sw_state[i]->dev) &&
++ (MAC_state->dev_sw_state[i]->dev != dev_sw_state->dev)) {
++ break;
++ }
++ }
++
++ if (i < AE531X_DEV_PER_MAC) {
++ /* Physical MAC is still in use */
++ if (MAC_state->primary_dev == dev_sw_state->unit_on_MAC) {
++ /*
++ * If the primary_dev is being stopped
++ * then we need to assign a new one.
++ */
++ MAC_state->primary_dev = i;
++ }
++ } else {
++ /* Physical MAC is no longer in use */
++ ae531x_MAC_shutdown(MAC_state);
++ }
++
++ dev_sw_state->dev = NULL;
++
++ LEAVE();
++ return 0;
++}
++
++/*******************************************************************************
++* ae531x_rxbuf_alloc - Allocate an skb to be associated with an RX descriptor.
++*
++* RETURNS: A pointer to the skb. Also returns a pointer to the underlying
++* buffer and the size of that buffer.
++*/
++void *
++ae531x_rxbuf_alloc(ae531x_MAC_t *MACInfo, char **rxBuffp, int *rxBuffSizep)
++{
++ struct sk_buff *skb;
++ char *rxBuff;
++ int rxBuffSize;
++
++ skb = dev_alloc_skb(AE531X_RX_BUF_SIZE);
++ if (skb) {
++ /* Add 2 to align the IP header on a DWORD boundary */
++ skb_reserve(skb, RXBUFF_RESERVE + 2);
++
++ rxBuffSize = skb_tailroom(skb);
++ rxBuff = skb->tail;
++
++ *rxBuffp = rxBuff;
++ *rxBuffSizep = rxBuffSize;
++
++ A_DATA_CACHE_INVAL(rxBuff, rxBuffSize);
++ }
++
++ return skb;
++}
++
++/*******************************************************************************
++* ae531x_swptr_free - Free the skb, if any, associated with a descriptor.
++*/
++void
++ae531x_swptr_free(VIRT_ADDR desc)
++{
++ struct sk_buff *skb;
++
++ skb = (struct sk_buff *)AE531X_DESC_SWPTR_GET(desc);
++ if (skb) {
++ AE531X_DESC_SWPTR_SET(desc, NULL);
++ kfree_skb(skb);
++ }
++}
++
++/*******************************************************************************
++*
++* ae531x_TxReap - the driver Tx completion routine.
++*
++* This routine reaps sk_buffs which have already been transmitted.
++*
++*/
++static void
++ae531x_TxReap(ae531x_MAC_state_t *MAC_state)
++{
++ AE531X_QUEUE *txq;
++ VIRT_ADDR txDesc;
++ UINT32 cmdsts;
++ struct sk_buff *skb;
++ int reaped;
++ ae531x_MAC_t *MACInfo;
++ static int aeUselessReap = 0;
++
++ ARRIVE();
++
++ MACInfo = &MAC_state->MACInfo;
++ txq = &MACInfo->txQueue;
++ reaped = 0;
++
++ while (1) {
++ txDesc = AE531X_QUEUE_ELE_NEXT_GET(txq, txq->reapDescAddr);
++ if (txDesc == txq->curDescAddr) {
++ break;
++ }
++
++ cmdsts = AE531X_DESC_STATUS_GET(KSEG1ADDR(txDesc));
++ if (cmdsts & DescOwnByDma) {
++ break;
++ }
++
++ /* Release sk_buff associated with completed transmit */
++ skb = (struct sk_buff *)AE531X_DESC_SWPTR_GET(txDesc);
++
++ if (skb) {
++ kfree_skb(skb);
++ AE531X_DESC_SWPTR_SET(txDesc, NULL);
++ }
++
++ /* Update statistics according to completed transmit desc */
++ if (cmdsts & DescTxErrors) {
++ AE531X_PRINT(AE531X_DEBUG_ERROR,
++ ("enetmac%d Tx prior error: 0x%8.8x <0x%8.8x> 0x%8.8x\n",
++ MACInfo->unit,
++ cmdsts,
++ DescTxErrors,
++ (int)txDesc));
++ MAC_state->stats.tx_errors++;
++ if (cmdsts & (DescTxLateCollision | DescTxExcCollisions)) {
++ MAC_state->stats.tx_aborted_errors++;
++ }
++ if (cmdsts & (DescTxLostCarrier | DescTxNoCarrier)) {
++ MAC_state->stats.tx_carrier_errors++;
++ }
++ } else {
++ MAC_state->stats.tx_bytes += AE531X_DESC_STATUS_RX_SIZE(cmdsts);
++ MAC_state->stats.tx_packets++;
++ }
++
++ MAC_state->stats.collisions +=
++ ((cmdsts & DescTxCollMask) >> DescTxCollShift);
++
++ txq->reapDescAddr = txDesc;
++ reaped++;
++ }
++
++ if (reaped > 0) {
++ int i;
++
++ AE531X_PRINT(AE531X_DEBUG_TX_REAP,
++ ("reaped %d\n", reaped));
++
++ /*
++ * Re-start transmit queues for all ethernet devices
++ * associated with this MAC.
++ */
++ for (i=0; i<AE531X_DEV_PER_MAC; i++) {
++ if (MAC_state->dev_sw_state[i]->dev)
++ netif_start_queue(MAC_state->dev_sw_state[i]->dev);
++ }
++ } else {
++ aeUselessReap++;
++ }
++
++ LEAVE();
++}
++
++/*******************************************************************************
++* ae531x_MAC_start_xmit sends a packet.
++*/
++static int
++ae531x_MAC_start_xmit(struct sk_buff *skb, struct net_device *dev)
++{
++ ae531x_dev_sw_state_t *dev_sw_state;
++ ae531x_MAC_state_t *MAC_state;
++ ae531x_MAC_t *MACInfo;
++ u32 buf;
++ u32 ctrlen;
++ u32 length;
++ int mtu;
++ int max_buf_size;
++ VIRT_ADDR txDesc;
++
++ ARRIVE();
++
++ dev_sw_state = (ae531x_dev_sw_state_t *)dev->priv;
++ MAC_state = dev_sw_state->MAC_state;
++ MACInfo = &MAC_state->MACInfo;
++
++ length = skb->len;
++
++ /* Check if this port is up, else toss packet */
++ if (!MACInfo->port_is_up) {
++ buf = virt_to_bus(skb->data);
++ AE531X_PRINT(AE531X_DEBUG_ERROR,
++ ("eth%d Tx Down, dropping buf=0x%8.8x, length=0x%8.8x, skb=%p\n",
++ dev_sw_state->enetUnit, buf, length, (void *)skb));
++
++ MAC_state->stats.tx_dropped++;
++ MAC_state->stats.tx_carrier_errors++;
++ goto dropFrame;
++ }
++
++ if (ae531x_IsInResetMode(MACInfo)) {
++ AE531X_PRINT(AE531X_DEBUG_ERROR,
++ ("eth%d Tx: In Chip reset - drop frame\n",
++ dev_sw_state->enetUnit));
++
++ MAC_state->stats.tx_dropped++;
++ MAC_state->stats.tx_aborted_errors++;
++ goto dropFrame;
++ }
++
++ /* Check if we can transport this packet */
++ length = max((u32)60, length); /* total length */
++ mtu = dev->mtu;
++ max_buf_size = mtu + HLEN;
++ if (length > max_buf_size) {
++ AE531X_PRINT(AE531X_DEBUG_ERROR,
++ ("eth%d Tx: length %d too long. mtu=%d, trailer=%d\n",
++ dev_sw_state->enetUnit, length, mtu, PHY_TRAILER_SIZE));
++
++ MAC_state->stats.tx_errors++;
++ MAC_state->stats.tx_aborted_errors++;
++
++ goto dropFrame;
++ }
++
++ /* Reap any old, completed Tx descriptors */
++ ae531x_TxReap(MAC_state);
++
++ txDesc = MACInfo->txQueue.curDescAddr;
++ if (txDesc == MACInfo->txQueue.reapDescAddr) {
++ int i;
++
++ AE531X_PRINT(AE531X_DEBUG_ERROR,
++ ("eth%d Tx: cannot get txDesc\n",
++ dev_sw_state->enetUnit));
++
++ MAC_state->stats.tx_dropped++;
++ MAC_state->stats.tx_fifo_errors++;
++
++ /*
++ * Stop transmit queues for any ethernet devices
++ * associated with this MAC.
++ */
++ for (i=0; i<AE531X_DEV_PER_MAC; i++) {
++ if (MAC_state->dev_sw_state[i]->dev)
++ netif_stop_queue(MAC_state->dev_sw_state[i]->dev);
++ }
++ goto dropFrame;
++ }
++
++#ifdef CONFIG_VENETDEV
++ {
++ struct sk_buff *newskb;
++
++ if (skb_cloned(skb) || (skb_tailroom(skb) < PHY_TRAILER_SIZE)) {
++#ifdef DEBUG_VENETDEV
++ if (skb_cloned(skb)) {
++ cloned_counter++;
++ if (skb_tailroom(skb) < PHY_TRAILER_SIZE) {
++ both_counter++;
++ }
++ } else {
++ expand_counter++;
++ }
++#endif
++ newskb = skb_copy_expand(skb, 0, PHY_TRAILER_SIZE, GFP_ATOMIC);
++ if (newskb == NULL) {
++ goto dropFrame;
++ }
++
++ dev_kfree_skb(skb);
++ skb = newskb;
++ }
++
++ phySetDestinationPort(skb->data, length, dev_sw_state->isLAN);
++ skb_put(skb, PHY_TRAILER_SIZE);
++ length += PHY_TRAILER_SIZE;
++ }
++#endif
++
++ /* We won't fail now; so consume this descriptor */
++ AE531X_CONSUME_DESC((&MACInfo->txQueue));
++
++ /* Update the descriptor */
++ buf = virt_to_bus(skb->data);
++ A_DATA_CACHE_FLUSH(skb->data, skb->len);
++ AE531X_DESC_BUFPTR_SET(txDesc, buf);
++ AE531X_DESC_SWPTR_SET(txDesc, skb);
++ ctrlen = AE531X_DESC_CTRLEN_GET(txDesc);
++ ctrlen = (ctrlen & (DescEndOfRing)) |
++ DescTxFirst |
++ DescTxLast |
++ DescTxIntEnable;
++
++ ctrlen |= ((length << DescSize1Shift) & DescSize1Mask);
++
++ AE531X_DESC_CTRLEN_SET(txDesc, ctrlen);
++ AE531X_DESC_STATUS_SET(txDesc, DescOwnByDma);
++
++ AE531X_PRINT(AE531X_DEBUG_TX,
++ ("eth%d Tx: Desc=0x%8.8x, L=0x%8.8x, D=0x%8.8x, d=0x%8.8x, length=0x%8.8x\n",
++ dev_sw_state->enetUnit,
++ (UINT32)txDesc,
++ AE531X_DESC_CTRLEN_GET(txDesc),
++ buf,
++ AE531X_DESC_LNKBUF_GET(txDesc),
++ length));
++
++ /* Must not use txDesc after this point */
++ A_DATA_CACHE_FLUSH_INVAL(txDesc, AE531X_DESC_SIZE);
++
++ /* Alert DMA engine to resume Tx */
++ ae531x_WriteDmaReg(MACInfo, DmaTxPollDemand, 0);
++ sysWbFlush();
++
++ MAC_state->stats.tx_packets++;
++ MAC_state->stats.tx_bytes += length;
++
++ /* Tell upper layers to keep it coming */
++ dev->trans_start = jiffies;
++
++ LEAVE();
++ return 0;
++
++dropFrame:
++ dev_kfree_skb(skb);
++
++ LEAVE();
++ return 0;
++}
++
++
++/*******************************************************************************
++* ae531x_MAC_tx_timeout handles transmit timeouts
++*/
++static void
++ae531x_MAC_tx_timeout(struct net_device *dev)
++{
++ ae531x_dev_sw_state_t *dev_sw_state;
++ ae531x_MAC_state_t *MAC_state;
++ ae531x_MAC_t *MACInfo;
++
++ ARRIVE();
++
++ dev_sw_state = (ae531x_dev_sw_state_t *)dev->priv;
++ MAC_state = dev_sw_state->MAC_state;
++ MACInfo = &MAC_state->MACInfo;
++
++ AE531X_PRINT(AE531X_DEBUG_ERROR,
++ ("enet%d: Tx timeout\n", dev_sw_state->enetUnit));
++
++ ae531x_restart(MACInfo);
++
++ LEAVE();
++}
++
++
++/*******************************************************************************
++* ae531x_MAC_do_ioctl is a placeholder for future ioctls.
++*/
++static int
++ae531x_MAC_do_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
++{
++ int rv;
++ ae531x_MAC_t *MACInfo;
++ struct ioctl_data {
++ u32 unit;
++ u32 addr;
++ u32 data;
++ } *req;
++ ae531x_dev_sw_state_t *dev_sw_state;
++ ae531x_MAC_state_t *MAC_state;
++
++ ARRIVE();
++
++ dev_sw_state = (ae531x_dev_sw_state_t *)dev->priv;
++ MAC_state = dev_sw_state->MAC_state;
++ MACInfo = &MAC_state->MACInfo;
++
++ req = (struct ioctl_data *)ifr->ifr_data;
++
++ switch( cmd ) {
++ default:
++ AE531X_PRINT(AE531X_DEBUG_ERROR,
++ ("Unsupported ioctl: 0x%x\n", cmd));
++ rv = -EOPNOTSUPP;
++ }
++
++ LEAVE();
++ return rv;
++}
++
++/*******************************************************************************
++* ae531x_MAC_set_mac_address sets a new hardware address for the device
++*/
++static int
++ae531x_MAC_set_mac_address(struct net_device *dev, void *addr)
++{
++ struct sockaddr *saddr = (struct sockaddr *)addr;
++
++ /* update dev struct */
++ memcpy(dev->dev_addr, &saddr->sa_data[0], dev->addr_len);
++
++ return 0;
++}
++
++/******************************************************************************
++* macAddrGet - Given a MACInfo pointer, return a pointer to an
++* array of chars that holds the corresponding MAC address.
++*/
++char *macAddrGet(ae531x_MAC_t *MACInfo)
++{
++ // return enet_mac_address_get(MACInfo->unit);
++ return ae531x_MAC_dev[MACInfo->unit]->dev_addr;
++}
++
++static void
++ae531x_MAC_setup_fntable(struct net_device *dev)
++{
++ /* Set a default (should be overridden by software) */
++ u8 default_MAC_address[] = { 0x00, 0x03, 0x7f, 0xe0, 0x02, 0xbF };
++
++ ARRIVE();
++
++ dev->get_stats = ae531x_MAC_get_stats;
++ dev->open = ae531x_MAC_open;
++ dev->stop = ae531x_MAC_stop;
++ dev->hard_start_xmit = ae531x_MAC_start_xmit;
++ dev->do_ioctl = ae531x_MAC_do_ioctl;
++#ifdef AR531X_NAPI
++ dev->poll = ae531x_MAC_poll;
++ dev->weight = 16;
++#endif
++ dev->tx_timeout = ae531x_MAC_tx_timeout;
++ dev->features = NETIF_F_HW_CSUM |\
++ NETIF_F_HIGHDMA;
++ dev->set_mac_address = ae531x_MAC_set_mac_address;
++ dev->set_multicast_list = ae531x_MAC_set_rx_mode;
++
++ /* Copy default MAC address into device descriptor */
++ memcpy(dev->dev_addr, default_MAC_address, dev->addr_len );
++
++ LEAVE();
++}
++
++/*
++ * ae531x_twisted_enet() returns 1 for chips where there is only one usable
++ * MAC, and that MAC is 1.
++ */
++static BOOL
++ae531x_twisted_enet(void)
++{
++ int wisoc_revision;
++ int flash_bus_width;
++
++ wisoc_revision = (sysRegRead(AR531X_REV) & AR531X_REV_MAJ) >>
++ AR531X_REV_MAJ_S;
++ if (wisoc_revision == AR531X_REV_MAJ_AR2313)
++ return TRUE;
++
++ flash_bus_width = sysRegRead(AR531X_FLASHCTL0) & FLASHCTL_MWx16;
++
++ if (flash_bus_width == 0) {
++ printk("Found AR2312-01\n");
++ return TRUE; /* AR2312-01 has 8 bit flash bus */
++ } else {
++ printk("Found AR2312-00\n");
++ return FALSE;
++ }
++}
++
++int
++ae531x_MAC_setup(void)
++{
++ int i;
++ int next_dev;
++ int rev;
++ struct net_device *dev;
++ ae531x_dev_sw_state_t *dev_sw_state;
++ ae531x_MAC_state_t *MAC_state;
++ ae531x_MAC_t *MACInfo;
++
++ ARRIVE();
++
++#if 0
++ /*
++ * This does not work since the AR2312 and AR5312 both have the same
++ * revision information in the CPU :-(
++ */
++ rev = (sysRegRead(AR531X_REV) & AR531X_REV_CHIP);
++
++ if ((rev & AR531X_REV_MIN) == AR5312_REV_MIN_SINGLE_ENET) {
++ ar531x_num_enet_macs = 1;
++ } else {
++ ar531x_num_enet_macs = 2;
++ }
++#else
++ /*
++ * Need to select the number of ethernet MACs based on the config
++ * information (sadly)
++ */
++#ifdef CONFIG_AR5312
++ ar531x_num_enet_macs = 2;
++#else
++ ar531x_num_enet_macs = 1;
++#endif
++#endif
++
++ next_dev = 0;
++ for (i=0; i<ar531x_num_enet_macs; i++) {
++
++ dev = ae531x_MAC_dev[next_dev] =
++ init_etherdev(NULL, sizeof(ae531x_dev_sw_state_t));
++
++ if (dev == NULL) {
++ LEAVE();
++ return -1;
++ }
++
++ ae531x_MAC_setup_fntable(dev);
++
++ dev_sw_state = (ae531x_dev_sw_state_t *)dev->priv;
++ dev_sw_state->enetUnit = next_dev;
++ dev_sw_state->unit_on_MAC = 0;
++ MAC_state = &per_MAC_info[i];
++ dev_sw_state->MAC_state = MAC_state;
++ MAC_state->dev_sw_state[AE531X_LAN_PORT] = dev_sw_state;
++ MAC_state->primary_dev = -1;
++
++ next_dev++;
++
++#ifdef CONFIG_VENETDEV
++ {
++ ae531x_dev_sw_state_t *lan_dev_sw_state;
++
++ lan_dev_sw_state = dev_sw_state;
++
++ dev = ae531x_MAC_dev[next_dev] =
++ init_etherdev(NULL, sizeof(ae531x_dev_sw_state_t));
++
++ if (dev == NULL) {
++ LEAVE();
++ return -1;
++ }
++
++ ae531x_MAC_setup_fntable(dev);
++
++ dev_sw_state = (ae531x_dev_sw_state_t *)dev->priv;
++ dev_sw_state->enetUnit = next_dev;
++ dev_sw_state->unit_on_MAC = 1;
++ dev_sw_state->MAC_state = MAC_state;
++ MAC_state->dev_sw_state[AE531X_WAN_PORT] = dev_sw_state;
++ lan_dev_sw_state->isLAN = TRUE; /* enet0 is LAN */
++ dev_sw_state->isLAN = FALSE ; /* enet1 is WAN */
++
++ next_dev++;
++ }
++#endif
++
++ /* Initialize per-MAC information */
++ MACInfo = &MAC_state->MACInfo;
++ MACInfo->unit = i;
++
++ if (ar531x_num_enet_macs == 1) {
++ if (ae531x_twisted_enet()) {
++ MACInfo->macBase =
++ (u32)(PHYS_TO_K1(AR531X_ENET1)+AE531X_MAC_OFFSET);
++ MACInfo->dmaBase =
++ (u32)(PHYS_TO_K1(AR531X_ENET1)+AE531X_DMA_OFFSET);
++ MACInfo->phyBase =
++ (u32)(PHYS_TO_K1(AR531X_ENET0)+AE531X_PHY_OFFSET);
++ MAC_state->irq = AR531X_IRQ_ENET1_INTRS;
++ } else {
++ MACInfo->macBase =
++ (u32)(PHYS_TO_K1(AR531X_ENET0)+AE531X_MAC_OFFSET);
++ MACInfo->dmaBase =
++ (u32)(PHYS_TO_K1(AR531X_ENET0)+AE531X_DMA_OFFSET);
++ MACInfo->phyBase =
++ (u32)(PHYS_TO_K1(AR531X_ENET0)+AE531X_PHY_OFFSET);
++ MAC_state->irq = AR531X_IRQ_ENET0_INTRS;
++ }
++ } else {
++ if (MACInfo->unit == 0) {
++ MACInfo->macBase =
++ (u32)(PHYS_TO_K1(AR531X_ENET0)+AE531X_MAC_OFFSET);
++ MACInfo->dmaBase =
++ (u32)(PHYS_TO_K1(AR531X_ENET0)+AE531X_DMA_OFFSET);
++ MACInfo->phyBase =
++ (u32)(PHYS_TO_K1(AR531X_ENET0)+AE531X_PHY_OFFSET);
++ MAC_state->irq = AR531X_IRQ_ENET0_INTRS;
++ } else {
++ MACInfo->macBase =
++ (u32)(PHYS_TO_K1(AR531X_ENET1)+AE531X_MAC_OFFSET);
++ MACInfo->dmaBase =
++ (u32)(PHYS_TO_K1(AR531X_ENET1)+AE531X_DMA_OFFSET);
++ MACInfo->phyBase =
++ (u32)(PHYS_TO_K1(AR531X_ENET1)+AE531X_PHY_OFFSET);
++ MAC_state->irq = AR531X_IRQ_ENET1_INTRS;
++ }
++ }
++ MACInfo->OSinfo = (void *)MAC_state;
++ }
++
++ LEAVE();
++ return 0;
++}
++
++module_init(ae531x_MAC_setup);
++
+diff -urN linux-2.4.32.new/arch/mips/ar531x/ae531xmac.c linux-2.4.32.new-eth/arch/mips/ar531x/ae531xmac.c
+--- linux-2.4.32.new/arch/mips/ar531x/ae531xmac.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.4.32.new-eth/arch/mips/ar531x/ae531xmac.c 2005-12-25 11:54:20.771271672 +0000
+@@ -0,0 +1,942 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License. See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright © 2003 Atheros Communications, Inc., All Rights Reserved.
++ */
++
++
++/*
++ * Ethernet driver for Atheros' ae531x ethernet MAC.
++ */
++
++#if linux
++#include <linux/config.h>
++#include <linux/types.h>
++#include <linux/delay.h>
++#include <linux/netdevice.h>
++#include <linux/etherdevice.h>
++#include <linux/init.h>
++#include <asm/io.h>
++
++#include "ar531xlnx.h"
++#endif /* linux */
++
++#include "ae531xreg.h"
++#include "ae531xmac.h"
++
++int ae531x_MAC_debug = AE531X_DEBUG_ERROR;
++
++/*
++ * These externs are for functions that this layer relies on
++ * that have OS-dependent implementations.
++ */
++extern UINT8 *macAddrGet(ae531x_MAC_t *MACInfo);
++
++/* Forward references to local functions */
++static void ae531x_QueueDestroy(AE531X_QUEUE *q);
++
++
++/******************************************************************************
++*
++* ae531x_ReadMacReg - read AE MAC register
++*
++* RETURNS: register value
++*/
++UINT32
++ae531x_ReadMacReg(ae531x_MAC_t *MACInfo, UINT32 reg)
++{
++ UINT32 addr = MACInfo->macBase+reg;
++ UINT32 data;
++
++ data = RegRead(addr);
++ return data;
++}
++
++
++/******************************************************************************
++*
++* ae531x_WriteMacReg - write AE MAC register
++*
++* RETURNS: N/A
++*/
++void
++ae531x_WriteMacReg(ae531x_MAC_t *MACInfo, UINT32 reg, UINT32 data)
++{
++ UINT32 addr = MACInfo->macBase+reg;
++
++ RegWrite(data, addr);
++}
++
++
++/******************************************************************************
++*
++* ae531x_SetMacReg - set bits in AE MAC register
++*
++* RETURNS: N/A
++*/
++void
++ae531x_SetMacReg(ae531x_MAC_t *MACInfo, UINT32 reg, UINT32 val)
++{
++ UINT32 addr = MACInfo->macBase+reg;
++ UINT32 data = RegRead(addr);
++
++ data |= val;
++ RegWrite(data, addr);
++}
++
++
++/******************************************************************************
++*
++* ae531x_ClearMacReg - clear bits in AE MAC register
++*
++* RETURNS: N/A
++*/
++void
++ae531x_ClearMacReg(ae531x_MAC_t *MACInfo, UINT32 reg, UINT32 val)
++{
++ UINT32 addr = MACInfo->macBase+reg;
++ UINT32 data = RegRead(addr);
++
++ data &= ~val;
++ RegWrite(data, addr);
++}
++
++
++/******************************************************************************
++*
++* ae531x_ReadDmaReg - read AE DMA register
++*
++* RETURNS: register value
++*/
++UINT32
++ae531x_ReadDmaReg(ae531x_MAC_t *MACInfo, UINT32 reg)
++{
++ UINT32 addr = MACInfo->dmaBase+reg;
++ UINT32 data = RegRead(addr);
++
++ return data;
++}
++
++
++/******************************************************************************
++*
++* ae531x_WriteDmaReg - write AE DMA register
++*
++* RETURNS: N/A
++*/
++void
++ae531x_WriteDmaReg(ae531x_MAC_t *MACInfo, UINT32 reg, UINT32 data)
++{
++ UINT32 addr = MACInfo->dmaBase+reg;
++
++ RegWrite(data, addr);
++}
++
++
++/******************************************************************************
++ *
++ * ae531x_AckIntr - clear interrupt bits in the status register.
++ * Note: Interrupt bits are *cleared* by writing a 1.
++ */
++void
++ae531x_AckIntr(ae531x_MAC_t *MACInfo, UINT32 data)
++{
++ ae531x_WriteDmaReg(MACInfo, DmaStatus, data);
++}
++
++
++/******************************************************************************
++*
++* ae531x_SetDmaReg - set bits in an AE DMA register
++*
++* RETURNS: N/A
++*/
++void
++ae531x_SetDmaReg(ae531x_MAC_t *MACInfo, UINT32 reg, UINT32 val)
++{
++ UINT32 addr = MACInfo->dmaBase+reg;
++ UINT32 data = RegRead(addr);
++
++ data |= val;
++ RegWrite(data, addr);
++}
++
++
++/******************************************************************************
++*
++* ae531x_ClearDmaReg - clear bits in an AE DMA register
++*
++* RETURNS: N/A
++*/
++void
++ae531x_ClearDmaReg(ae531x_MAC_t *MACInfo, UINT32 reg, UINT32 val)
++{
++ UINT32 addr = MACInfo->dmaBase+reg;
++ UINT32 data = RegRead(addr);
++
++ data &= ~val;
++ RegWrite(data, addr);
++}
++
++
++/******************************************************************************
++*
++* ae531x_ReadMiiReg - read PHY registers via AE MAC Mii addr/data registers
++*
++* RETURNS: register value
++*/
++UINT32
++ae531x_ReadMiiReg(UINT32 phyBase, UINT32 reg)
++{
++ UINT32 data;
++ UINT32 addr = phyBase+reg;
++
++ data = RegRead(addr);
++ return data;
++}
++
++
++/******************************************************************************
++*
++* ae531x_WriteMiiReg - write PHY registers via AE MAC Mii addr/data registers
++*
++* RETURNS: N/A
++*/
++void
++ae531x_WriteMiiReg(UINT32 phyBase, UINT32 reg, UINT32 data)
++{
++ UINT32 addr = phyBase+reg;
++
++ RegWrite(data, addr);
++}
++
++
++/******************************************************************************
++*
++* ae531x_MiiRead - read AE Mii register
++*
++* RETURNS: register value
++*/
++UINT16
++ae531x_MiiRead(UINT32 phyBase, UINT32 phyAddr, UINT8 reg)
++{
++ UINT32 addr;
++ UINT16 data;
++
++ addr = ((phyAddr << MiiDevShift) & MiiDevMask) | ((reg << MiiRegShift) & MiiRegMask);
++
++ ae531x_WriteMiiReg(phyBase, MacMiiAddr, addr );
++ do {
++ /* nop */
++ } while ((ae531x_ReadMiiReg(phyBase, MacMiiAddr ) & MiiBusy) == MiiBusy);
++
++ data = ae531x_ReadMiiReg(phyBase, MacMiiData) & 0xFFFF;
++
++ return data;
++}
++
++
++/******************************************************************************
++*
++* ae531x_MiiWrite - write AE Mii register
++*
++* RETURNS: N/A
++*/
++void
++ae531x_MiiWrite(UINT32 phyBase, UINT32 phyAddr, UINT8 reg, UINT16 data)
++{
++ UINT32 addr;
++
++ ae531x_WriteMiiReg(phyBase, MacMiiData, data );
++
++ addr = ((phyAddr << MiiDevShift) & MiiDevMask) |
++ ((reg << MiiRegShift) & MiiRegMask) | MiiWrite;
++ ae531x_WriteMiiReg(phyBase, MacMiiAddr, addr );
++
++ do {
++ /* nop */
++ } while ((ae531x_ReadMiiReg(phyBase, MacMiiAddr ) & MiiBusy) == MiiBusy);
++}
++
++
++/*******************************************************************************
++* ae531x_BeginResetMode - enter a special "reset mode" in which
++* -no interrupts are expected from the device
++* -the device will not transmit nor receive
++* -attempts to send or receive will return with an error and
++* -the device will be reset at the next convenient opportunity.
++*/
++void
++ae531x_BeginResetMode(ae531x_MAC_t *MACInfo)
++{
++ /* Set the reset flag */
++ MACInfo->aeProcessRst = 1;
++}
++
++
++/*******************************************************************************
++* ae531x_EndResetMode - exit the special "reset mode" entered
++* earlier via a call to ae531x_BeginResetMode.
++*/
++void
++ae531x_EndResetMode(ae531x_MAC_t *MACInfo)
++{
++ MACInfo->aeProcessRst = 0;
++}
++
++
++/*******************************************************************************
++* ae531x_IsInResetMode - determine whether or not the device is
++* currently in "reset mode" (i.e. that a device reset is pending)
++*/
++BOOL
++ae531x_IsInResetMode(ae531x_MAC_t *MACInfo)
++{
++ return MACInfo->aeProcessRst;
++}
++
++
++/******************************************************************************
++*
++* ae531x_DmaRxStart - Start Rx
++*
++* RETURNS: N/A
++*/
++static void
++ae531x_DmaRxStart(ae531x_MAC_t *MACInfo)
++{
++ ae531x_SetDmaReg(MACInfo, DmaControl, DmaRxStart);
++ sysWbFlush();
++}
++
++
++/******************************************************************************
++*
++* ae531x_DmaRxStop - Stop Rx
++*
++* RETURNS: N/A
++*/
++void
++ae531x_DmaRxStop(ae531x_MAC_t *MACInfo)
++{
++ ae531x_ClearDmaReg(MACInfo, DmaControl, DmaRxStart);
++ sysWbFlush();
++}
++
++
++/******************************************************************************
++*
++* ae531x_DmaTxStart - Start Tx
++*
++* RETURNS: N/A
++*/
++void
++ae531x_DmaTxStart(ae531x_MAC_t *MACInfo)
++{
++ ae531x_SetDmaReg(MACInfo, DmaControl, DmaTxStart);
++ sysWbFlush();
++}
++
++
++/******************************************************************************
++*
++* ae531x_DmaTxStop - Stop Tx
++*
++* RETURNS: N/A
++*/
++void
++ae531x_DmaTxStop(ae531x_MAC_t *MACInfo)
++{
++ ae531x_ClearDmaReg(MACInfo, DmaControl, DmaTxStart);
++ sysWbFlush();
++}
++
++
++/******************************************************************************
++*
++* ae531x_DmaIntEnable - Enable DMA interrupts
++*
++* RETURNS: N/A
++*/
++void
++ae531x_DmaIntEnable(ae531x_MAC_t *MACInfo)
++{
++ ae531x_WriteDmaReg(MACInfo, DmaIntrEnb, DmaIntEnable);
++}
++
++
++/******************************************************************************
++*
++* ae531x_DmaIntDisable - Disable DMA interrupts
++*
++* RETURNS: N/A
++*/
++void
++ae531x_DmaIntDisable(ae531x_MAC_t *MACInfo)
++{
++ ae531x_WriteDmaReg(MACInfo, DmaIntrEnb, DmaIntDisable);
++}
++
++
++/******************************************************************************
++*
++* ae531x_DmaIntClear - Clear DMA interrupts
++*
++* RETURNS: N/A
++*/
++static void
++ae531x_DmaIntClear(ae531x_MAC_t *MACInfo)
++{
++ /* clear all interrupt requests */
++ ae531x_WriteDmaReg(MACInfo, DmaStatus,
++ ae531x_ReadDmaReg(MACInfo, DmaStatus));
++}
++
++
++/******************************************************************************
++* Initialize generic queue data
++*/
++void
++ae531x_QueueInit(AE531X_QUEUE *q, char *pMem, int count)
++{
++ ARRIVE();
++ q->firstDescAddr = pMem;
++ q->lastDescAddr = (VIRT_ADDR)((UINT32)q->firstDescAddr +
++ (count - 1) * AE531X_QUEUE_ELE_SIZE);
++ q->curDescAddr = q->firstDescAddr;
++ q->count = count;
++ LEAVE();
++}
++
++
++/******************************************************************************
++* ae531x_TxQueueCreate - create a circular queue of descriptors for Transmit
++*/
++static int
++ae531x_TxQueueCreate(ae531x_MAC_t *MACInfo,
++ AE531X_QUEUE *q,
++ char *pMem,
++ int count)
++{
++ int i;
++ VIRT_ADDR descAddr;
++
++ ARRIVE();
++
++ ae531x_QueueInit(q, pMem, count);
++ q->reapDescAddr = q->lastDescAddr;
++
++ /* Initialize Tx buffer descriptors. */
++ for (i=0, descAddr=q->firstDescAddr;
++ i<count;
++ i++, descAddr=(VIRT_ADDR)((UINT32)descAddr + AE531X_QUEUE_ELE_SIZE))
++ {
++ /* Update the size, BUFPTR, and SWPTR fields */
++
++ AE531X_DESC_STATUS_SET(descAddr, 0);
++ AE531X_DESC_CTRLEN_SET(descAddr, 0);
++
++ AE531X_DESC_BUFPTR_SET(descAddr, (UINT32)0);
++ AE531X_DESC_LNKBUF_SET(descAddr, (UINT32)0);
++ AE531X_DESC_SWPTR_SET(descAddr, (void *)0);
++ } /* for each desc */
++
++ /* Make the queue circular */
++ AE531X_DESC_CTRLEN_SET(q->lastDescAddr,
++ DescEndOfRing|AE531X_DESC_CTRLEN_GET(q->lastDescAddr));
++
++ AE531X_PRINT(AE531X_DEBUG_RESET,
++ ("ethmac%d Txbuf begin = %x, end = %x\n",
++ MACInfo->unit,
++ (UINT32)q->firstDescAddr,
++ (UINT32)q->lastDescAddr));
++
++ LEAVE();
++ return 0;
++}
++
++
++/******************************************************************************
++* ae531x_RxQueueCreate - create a circular queue of Rx descriptors
++*/
++int
++ae531x_RxQueueCreate(ae531x_MAC_t *MACInfo,
++ AE531X_QUEUE *q,
++ char *pMem,
++ int count)
++{
++ int i;
++ VIRT_ADDR descAddr;
++
++ ARRIVE();
++
++ ae531x_QueueInit(q, pMem, count);
++ q->reapDescAddr = NULL;
++
++
++ /* Initialize Rx buffer descriptors */
++ for (i=0, descAddr=q->firstDescAddr;
++ i<count;
++ i++, descAddr=(VIRT_ADDR)((UINT32)descAddr + AE531X_QUEUE_ELE_SIZE))
++ {
++ void *swptr;
++ char *rxBuffer;
++ int rxBufferSize;
++
++ swptr = ae531x_rxbuf_alloc(MACInfo, &rxBuffer, &rxBufferSize);
++ if (swptr == NULL) {
++ AE531X_PRINT(AE531X_DEBUG_RESET,
++ ("ethmac%d RX queue: ae531x_rxbuf_alloc failed\n",
++ MACInfo->unit));
++ ae531x_QueueDestroy(q);
++ return -1;
++ }
++ AE531X_DESC_SWPTR_SET(descAddr, swptr);
++
++ AE531X_DESC_STATUS_SET(descAddr, DescOwnByDma);
++ AE531X_DESC_CTRLEN_SET(descAddr, rxBufferSize);
++ AE531X_DESC_BUFPTR_SET(descAddr, virt_to_bus(rxBuffer));
++ AE531X_DESC_LNKBUF_SET(descAddr, (UINT32)0);
++ } /* for each desc */
++
++ /* Make the queue circular */
++ AE531X_DESC_CTRLEN_SET(q->lastDescAddr,
++ DescEndOfRing|AE531X_DESC_CTRLEN_GET(q->lastDescAddr));
++
++ AE531X_PRINT(AE531X_DEBUG_RESET,
++ ("ethmac%d Rxbuf begin = %x, end = %x\n",
++ MACInfo->unit,
++ (UINT32)q->firstDescAddr,
++ (UINT32)q->lastDescAddr));
++
++ LEAVE();
++ return 0;
++}
++
++
++/******************************************************************************
++* ae531x_QueueDestroy -- Free all buffers and descriptors associated
++* with a queue.
++*/
++static void
++ae531x_QueueDestroy(AE531X_QUEUE *q)
++{
++ int i;
++ int count;
++ VIRT_ADDR descAddr;
++
++ ARRIVE();
++
++ count = q->count;
++
++ for (i=0, descAddr=q->firstDescAddr;
++ i<count;
++ i++, descAddr=(VIRT_ADDR)((UINT32)descAddr + AE531X_QUEUE_ELE_SIZE)) {
++
++ AE531X_DESC_STATUS_SET(descAddr, 0);
++ AE531X_DESC_CTRLEN_SET(descAddr, 0);
++ AE531X_DESC_BUFPTR_SET(descAddr, (UINT32)0);
++ AE531X_DESC_LNKBUF_SET(descAddr, (UINT32)0);
++
++ ae531x_swptr_free(descAddr); /* Free OS-specific software pointer */
++ }
++
++ LEAVE();
++}
++
++static void
++ae531x_TxQueueDestroy(ae531x_MAC_t *MACInfo)
++{
++ ae531x_QueueDestroy(&MACInfo->txQueue);
++}
++
++static void
++ae531x_RxQueueDestroy(ae531x_MAC_t *MACInfo)
++{
++ ae531x_QueueDestroy(&MACInfo->rxQueue);
++}
++
++
++/******************************************************************************
++* ae531x_AllocateQueues - Allocate receive and transmit queues
++*/
++int
++ae531x_AllocateQueues(ae531x_MAC_t *MACInfo)
++{
++ size_t QMemSize;
++ char *pTxBuf = NULL;
++ char *pRxBuf = NULL;
++
++ ARRIVE();
++
++ MACInfo->txDescCount = AE531X_TX_DESC_COUNT_DEFAULT;
++ QMemSize = AE531X_QUEUE_ELE_SIZE * MACInfo->txDescCount;
++ pTxBuf = MALLOC(QMemSize);
++ if (pTxBuf == NULL) {
++ AE531X_PRINT(AE531X_DEBUG_RESET,
++ ("ethmac%d Failed to allocate TX queue\n", MACInfo->unit));
++ goto AllocQFail;
++ }
++
++ if (ae531x_TxQueueCreate(MACInfo, &MACInfo->txQueue, pTxBuf,
++ MACInfo->txDescCount) < 0)
++ {
++ AE531X_PRINT(AE531X_DEBUG_RESET,
++ ("ethmac%d Failed to create TX queue\n", MACInfo->unit));
++ goto AllocQFail;
++ }
++
++ MACInfo->rxDescCount = AE531X_RX_DESC_COUNT_DEFAULT;
++ QMemSize = AE531X_QUEUE_ELE_SIZE * MACInfo->rxDescCount;
++ pRxBuf = MALLOC(QMemSize);
++ if (pRxBuf == NULL) {
++ AE531X_PRINT(AE531X_DEBUG_RESET,
++ ("ethmac%d Failed to allocate RX queue\n", MACInfo->unit));
++ goto AllocQFail;
++ }
++
++ if (ae531x_RxQueueCreate(MACInfo, &MACInfo->rxQueue, pRxBuf,
++ MACInfo->rxDescCount) < 0)
++ {
++ AE531X_PRINT(AE531X_DEBUG_RESET,
++ ("ethmac%d Failed to create RX queue\n", MACInfo->unit));
++ goto AllocQFail;
++ }
++
++ AE531X_PRINT(AE531X_DEBUG_RESET,
++ ("ethmac%d Memory setup complete.\n", MACInfo->unit));
++
++ LEAVE();
++ return 0;
++
++AllocQFail:
++ MACInfo->txDescCount = 0; /* sanity */
++ MACInfo->rxDescCount = 0; /* sanity */
++
++ if (pTxBuf) {
++ FREE(pTxBuf);
++ }
++ if (pRxBuf) {
++ FREE(pRxBuf);
++ }
++
++ LEAVE();
++ return -1;
++}
++
++
++/******************************************************************************
++*
++* ae531x_FreeQueues - Free Transmit & Receive queues
++*/
++void
++ae531x_FreeQueues(ae531x_MAC_t *MACInfo)
++{
++ ae531x_TxQueueDestroy(MACInfo);
++ FREE(MACInfo->txQueue.firstDescAddr);
++
++ ae531x_RxQueueDestroy(MACInfo);
++ FREE(MACInfo->rxQueue.firstDescAddr);
++}
++
++/******************************************************************************
++*
++* ae531x_DmaReset - Reset DMA and TLI controllers
++*
++* RETURNS: N/A
++*/
++void
++ae531x_DmaReset(ae531x_MAC_t *MACInfo)
++{
++ int i;
++ UINT32 descAddr;
++
++ ARRIVE();
++
++ /* Disable device interrupts prior to any errors during stop */
++ intDisable(MACInfo->ilevel);
++
++ /* Disable MAC rx and tx */
++ ae531x_ClearMacReg(MACInfo, MacControl, (MacRxEnable | MacTxEnable));
++
++ /* Reset dma controller */
++ ae531x_WriteDmaReg(MACInfo, DmaBusMode, DmaResetOn);
++
++ /* Delay 2 usec */
++ sysUDelay(2);
++
++ /* Flush the rx queue */
++ descAddr = (UINT32)MACInfo->rxQueue.firstDescAddr;
++ MACInfo->rxQueue.curDescAddr = MACInfo->rxQueue.firstDescAddr;
++ for (i=0;
++ i<(MACInfo->rxDescCount);
++ i++, descAddr += AE531X_QUEUE_ELE_SIZE) {
++ AE531X_DESC_STATUS_SET(descAddr, DescOwnByDma);
++ }
++
++ /* Flush the tx queue */
++ descAddr = (UINT32)MACInfo->txQueue.firstDescAddr;
++ MACInfo->txQueue.curDescAddr = MACInfo->txQueue.firstDescAddr;
++ MACInfo->txQueue.reapDescAddr = MACInfo->txQueue.lastDescAddr;
++ for (i=0;
++ i<(MACInfo->txDescCount);
++ i++, descAddr += AE531X_QUEUE_ELE_SIZE) {
++ AE531X_DESC_STATUS_SET (descAddr, 0);
++ }
++
++ /* Set init register values */
++ ae531x_WriteDmaReg(MACInfo, DmaBusMode, DmaBusModeInit);
++
++ /* Install the first Tx and Rx queues on the device */
++ ae531x_WriteDmaReg(MACInfo, DmaRxBaseAddr,
++ (UINT32)MACInfo->rxQueue.firstDescAddr);
++ ae531x_WriteDmaReg(MACInfo, DmaTxBaseAddr,
++ (UINT32)MACInfo->txQueue.firstDescAddr);
++
++ ae531x_WriteDmaReg(MACInfo, DmaControl, DmaStoreAndForward);
++
++ ae531x_WriteDmaReg(MACInfo, DmaIntrEnb, DmaIntDisable);
++
++ AE531X_PRINT(AE531X_DEBUG_RESET,
++ ("ethmac%d: DMA RESET!\n", MACInfo->unit));
++
++ /* Turn on device interrupts -- enable most errors */
++ ae531x_DmaIntClear(MACInfo); /* clear interrupt requests */
++ ae531x_DmaIntEnable(MACInfo); /* enable interrupts */
++ /* Enable receive interrupts separately (they are not part
++ * of the main group since they are enabled & disabled by
++ * the polling routine.
++ */
++ ae531x_SetDmaReg(MACInfo, DmaIntrEnb,
++ (DmaIntRxNoBuffer | DmaIntRxCompleted));
++
++ ae531x_EndResetMode(MACInfo);
++
++ intEnable(MACInfo->ilevel);
++
++ LEAVE();
++}
++
++
++/******************************************************************************
++*
++* ae531x_MACAddressSet - Set the ethernet address
++*
++* Sets the ethernet address according to settings in flash.
++*
++* RETURNS: void
++*/
++static void
++ae531x_MACAddressSet(ae531x_MAC_t *MACInfo)
++{
++ unsigned int data;
++ UINT8 *macAddr;
++
++ ARRIVE();
++
++ macAddr = macAddrGet(MACInfo);
++
++ /* set our MAC address */
++ data = (macAddr[5]<<8) | macAddr[4];
++ ae531x_WriteMacReg(MACInfo, MacAddrHigh, data );
++
++ data = (macAddr[3]<<24) | (macAddr[2]<<16) | (macAddr[1]<<8) | macAddr[0];
++ ae531x_WriteMacReg(MACInfo, MacAddrLow, data );
++
++ AE531X_PRINT(AE531X_DEBUG_RESET,
++ ("ethmac%d Verify MAC address %8.8X %8.8X \n",
++ MACInfo->unit,
++ ae531x_ReadMacReg(MACInfo, MacAddrLow),
++ ae531x_ReadMacReg(MACInfo, MacAddrHigh)));
++
++ AE531X_PRINT(AE531X_DEBUG_RESET,
++ (" sb = %2.2X %2.2X %2.2X %2.2X %2.2X %2.2X\n",
++ 0xff&macAddr[0],
++ 0xff&macAddr[1],
++ 0xff&macAddr[2],
++ 0xff&macAddr[3],
++ 0xff&macAddr[4],
++ 0xff&macAddr[5]));
++ LEAVE();
++}
++
++
++/******************************************************************************
++*
++* ae_SetMACFromPhy - read Phy settings and update Mac
++* with current duplex and speed.
++*
++* RETURNS:
++*/
++static void
++ae531x_SetMACFromPhy(ae531x_MAC_t *MACInfo)
++{
++ UINT32 macCtl;
++ BOOL fullDuplex;
++
++ ARRIVE();
++
++ /* Get duplex mode from Phy */
++ fullDuplex = phyIsFullDuplex(MACInfo->unit);
++
++ /* Flag is set for full duplex mode, else cleared */
++ macCtl = ae531x_ReadMacReg(MACInfo, MacControl);
++
++ if (fullDuplex) {
++ /* set values of control registers */
++ macCtl &= ~MacDisableRxOwn;
++ macCtl |= MacFullDuplex;
++ ae531x_WriteMacReg(MACInfo, MacControl, macCtl);
++ ae531x_WriteMacReg(MACInfo, MacFlowControl, MacFlowControlInitFdx);
++#if 0
++ printk ("[Full Duplex] CTRL=%#x FLOW=%#x\n", macCtl,
++ MacFlowControlInitFdx);
++#endif
++ } else {
++ /* set values of control registers */
++ ae531x_WriteMacReg(MACInfo, MacFlowControl, MacFlowControlInitHdx);
++ macCtl |= MacDisableRxOwn;
++ macCtl &= ~MacFullDuplex;
++ ae531x_WriteMacReg(MACInfo, MacControl, macCtl);
++#if 0
++ printk ("[Half Duplex] CTRL=%#x FLOW=%#x\n", macCtl,
++ MacFlowControlInitHdx);
++#endif
++ }
++
++ LEAVE();
++}
++
++
++/******************************************************************************
++* ae531x_MACReset -- sets MAC address and duplex.
++*/
++void
++ae531x_MACReset(ae531x_MAC_t *MACInfo)
++{
++ ae531x_MACAddressSet(MACInfo);
++
++ ae531x_SetMACFromPhy(MACInfo);
++}
++
++
++/******************************************************************************
++* ae531x_EnableComm -- enable Transmit and Receive
++*/
++void
++ae531x_EnableComm(ae531x_MAC_t *MACInfo)
++{
++ ae531x_SetMacReg(MACInfo, MacControl, (MacRxEnable | MacTxEnable));
++ ae531x_DmaRxStart(MACInfo); /* start receiver */
++ ae531x_DmaTxStart(MACInfo); /* start transmitter */
++}
++
++
++/******************************************************************************
++* ae531x_DisableComm -- disable Transmit and Receive
++*/
++void
++ae531x_DisableComm(ae531x_MAC_t *MACInfo)
++{
++ ae531x_ClearMacReg(MACInfo, MacControl, (MacRxEnable | MacTxEnable));
++}
++
++
++/******************************************************************************
++* ae531x_reset -- Cold reset ethernet interface
++*/
++void
++ae531x_reset(ae531x_MAC_t *MACInfo)
++{
++ UINT32 mask = 0;
++ UINT32 regtmp;
++
++ if (ar531x_num_enet_macs == 2) {
++ if (MACInfo->unit == 0) {
++ mask = AR531X_RESET_ENET0 | AR531X_RESET_EPHY0;
++ } else {
++ mask = AR531X_RESET_ENET1 | AR531X_RESET_EPHY1;
++ }
++ } else {
++ mask = AR531X_RESET_ENET0 | AR531X_RESET_EPHY0 |
++ AR531X_RESET_ENET1 | AR531X_RESET_EPHY1;
++ }
++
++ /* Put into reset */
++ regtmp = sysRegRead(AR531X_RESET);
++ sysRegWrite(AR531X_RESET, regtmp | mask);
++ sysMsDelay(15);
++
++ /* Pull out of reset */
++ regtmp = sysRegRead(AR531X_RESET);
++ sysRegWrite(AR531X_RESET, regtmp & ~mask);
++ sysUDelay(25);
++
++ /* Enable */
++ if (ar531x_num_enet_macs == 2) {
++ if (MACInfo->unit == 0) {
++ mask = AR531X_ENABLE_ENET0;
++ } else {
++ mask = AR531X_ENABLE_ENET1;
++ }
++ } else {
++ mask = AR531X_ENABLE_ENET0 | AR531X_ENABLE_ENET1;
++ }
++ regtmp = sysRegRead(AR531X_ENABLE);
++ sysRegWrite(AR531X_ENABLE, regtmp | mask);
++}
++
++
++/******************************************************************************
++* ae531x_unitLinkLost -- Called from PHY layer to notify the MAC layer
++* that there are no longer any live links associated with a MAC.
++*/
++void
++ae531x_unitLinkLost(int ethUnit)
++{
++ AE531X_PRINT(AE531X_DEBUG_LINK_CHANGE,
++ ("enetmac%d link down\n", ethUnit));
++}
++
++
++/******************************************************************************
++* ae531x_unitLinkGained -- Called from PHY layer to notify the MAC layer
++* that there are 1 or more live links associated with a MAC.
++*/
++void
++ae531x_unitLinkGained(int ethUnit)
++{
++ AE531X_PRINT(AE531X_DEBUG_LINK_CHANGE,
++ ("enet%d link up\n", ethUnit));
++}
++
++/******************************************************************************
++* ae531x_ethMacDefault -- Called from PHY layer to determine the default
++* ethernet MAC. On some "twisted" platforms, the only usable MAC is 1,
++* while on others the usable MAC is 0. Future boards may allow both MACs
++* to be used; in this case, return -1 to indicate that there IS NO default
++* MAC.
++*
++* Note: one some AR2312 platforms the PHY needs to be accessed through
++* MAC 0, even though the MAC itself is addressed through MAC 1. Since this
++* function is used by the PHY layer to determine which MAC it should use,
++* the twisted case is limited to the one where the PHY is actually addressed
++* through MAC 1 rather than MAC 0.
++*/
++int
++ae531x_ethMacDefault(void)
++{
++ /*
++ * Where there are two MACs, there is no real default
++ */
++ if (ar531x_num_enet_macs == 2)
++ return -1;
++
++ /*
++ * All single MAC platforms seem to address the PHY through MAC 0,
++ * even when they use MAC 1 for the actual MAC functions.
++ */
++ return 0;
++}
+diff -urN linux-2.4.32.new/arch/mips/ar531x/ae531xmac.h linux-2.4.32.new-eth/arch/mips/ar531x/ae531xmac.h
+--- linux-2.4.32.new/arch/mips/ar531x/ae531xmac.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.4.32.new-eth/arch/mips/ar531x/ae531xmac.h 2005-12-25 11:54:20.819264376 +0000
+@@ -0,0 +1,208 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License. See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright © 2003 Atheros Communications, Inc., All Rights Reserved.
++ */
++
++/*
++ * See README to understand the decomposition of the ethernet driver.
++ *
++ * This file contains OS-independent pure software definitions for
++ * ethernet support on the AR531X platform.
++ */
++
++#ifndef _AE531XMAC_H_
++#define _AE531XMAC_H_
++
++/*
++ * DEBUG switches to control verbosity.
++ * Just modify the value of ae531x_MAC_debug.
++ */
++#define AE531X_DEBUG_ALL 0xffffffff
++#define AE531X_DEBUG_ERROR 0x00000001 /* Unusual conditions and Errors */
++#define AE531X_DEBUG_ARRIVE 0x00000002 /* Arrive into a function */
++#define AE531X_DEBUG_LEAVE 0x00000004 /* Leave a function */
++#define AE531X_DEBUG_RESET 0x00000008 /* Reset */
++#define AE531X_DEBUG_TX 0x00000010 /* Transmit */
++#define AE531X_DEBUG_TX_REAP 0x00000020 /* Transmit Descriptor Reaping */
++#define AE531X_DEBUG_RX 0x00000040 /* Receive */
++#define AE531X_DEBUG_RX_STOP 0x00000080 /* Receive Early Stop */
++#define AE531X_DEBUG_INT 0x00000100 /* Interrupts */
++#define AE531X_DEBUG_LINK_CHANGE 0x00000200 /* PHY Link status changed */
++
++extern int ae531x_MAC_debug;
++
++extern int ar531x_num_enet_macs;
++
++#define AE531X_PRINT(FLG, X) \
++{ \
++ if (ae531x_MAC_debug & (FLG)) { \
++ DEBUG_PRINTF("%s#%d:%s ", \
++ __FILE__, \
++ __LINE__, \
++ __FUNCTION__); \
++ DEBUG_PRINTF X; \
++ } \
++}
++
++#define ARRIVE() AE531X_PRINT(AE531X_DEBUG_ARRIVE, ("Arrive{\n"))
++#define LEAVE() AE531X_PRINT(AE531X_DEBUG_LEAVE, ("}Leave\n"))
++
++#define RegRead(addr) \
++ (*(volatile unsigned int *)(addr))
++
++#define RegWrite(val,addr) \
++ ((*(volatile unsigned int *)(addr)) = (val))
++
++/*****************************************************************
++ * Phy code is broken out into a separate layer, so that different
++ * PHY hardware can easily be supported.
++ *
++ * These functions are provided by the PHY layer for use by the MAC layer.
++ * phySetup -- Set phy hardware appropriately for a MAC unit
++ *
++ * phyCheckStatusChange -- Look for dropped/initiated links on any
++ * phy port associated with a MAC unit
++ *
++ * phyIsSpeed100 -- Determines whether or not a PHY is up and
++ * running at 100Mbit
++ *
++ * phyIsFullDuplex -- Determines whether or not a PHY is up and
++ * running in Full Duplex mode
++ *
++ */
++#ifdef CONFIG_MARVELL_ENET_PHY
++/*
++ * Mapping of generic phy APIs to Marvell Ethernet Switch phy functions.
++ */
++#include "mvPhy.h"
++#define phySetup(ethUnit, phyBase) mv_phySetup((ethUnit), (phyBase))
++#define phyCheckStatusChange(ethUnit) mv_phyCheckStatusChange(ethUnit)
++#define phyIsSpeed100(ethUnit) mv_phyIsSpeed100(ethUnit)
++#define phyIsFullDuplex(ethUnit) mv_phyIsFullDuplex(ethUnit)
++
++#ifdef CONFIG_VENETDEV
++#define PHY_TRAILER_SIZE MV_PHY_TRAILER_SIZE
++extern int mv_phyDetermineSource(char *data, int len);
++extern void mv_phySetDestinationPort(char *data, int len, int fromLAN);
++#define phyDetermineSource(data, len) mv_phyDetermineSource((data), (len))
++#define phySetDestinationPort(data, len, fromLAN) mv_phySetDestinationPort((data), (len), (fromLAN))
++#else
++#define PHY_TRAILER_SIZE 0
++#endif
++#endif /* CONFIG_MARVELL_ENET_PHY */
++
++#if defined(CONFIG_KENDIN_ENET_PHY) || defined(CONFIG_REALTEK_ENET_PHY)
++/*
++ * Mapping of generic phy APIs to Kendin KS8721B and RealTek RTL8201BL phys.
++ */
++#include "rtPhy.h"
++#define phySetup(ethUnit, phyBase) rt_phySetup((ethUnit), (phyBase))
++#define phyCheckStatusChange(ethUnit) rt_phyCheckStatusChange(ethUnit)
++#define phyIsSpeed100(ethUnit) rt_phyIsSpeed100(ethUnit)
++#define phyIsFullDuplex(ethUnit) rt_phyIsFullDuplex(ethUnit)
++#endif
++
++#if !defined(PHY_TRAILER_SIZE)
++#define PHY_TRAILER_SIZE 0
++#endif
++
++/*****************************************************************
++ * MAC-independent interface to be used by PHY code
++ *
++ * These functions are provided by the MAC layer for use by the PHY layer.
++ */
++#define phyRegRead ae531x_MiiRead
++#define phyRegWrite ae531x_MiiWrite
++#define phyLinkLost(ethUnit) ae531x_unitLinkLost(ethUnit)
++#define phyLinkGained(ethUnit) ae531x_unitLinkGained(ethUnit)
++#define phyEthMacDefault() ae531x_ethMacDefault()
++
++void ae531x_unitLinkLost(int unit);
++void ae531x_unitLinkGained(int unit);
++int ae531x_ethMacDefault(void);
++
++
++/* RXBUFF_RESERVE enables building header on WLAN-side in place */
++#define RXBUFF_RESERVE 96
++#define ETH_CRC_LEN 4
++
++/*****************************************************************
++ * Descriptor queue
++ */
++typedef struct ae531x_queue {
++ VIRT_ADDR firstDescAddr; /* descriptor array address */
++ VIRT_ADDR lastDescAddr; /* last descriptor address */
++ VIRT_ADDR curDescAddr; /* current descriptor address */
++ VIRT_ADDR reapDescAddr; /* current tail of tx descriptors reaped */
++ UINT16 count; /* number of elements */
++} AE531X_QUEUE;
++
++/* Given a descriptor, return the next one in a circular list */
++#define AE531X_QUEUE_ELE_NEXT_GET(q, descAddr) \
++ ((descAddr) == (q)->lastDescAddr) ? (q)->firstDescAddr : \
++ (VIRT_ADDR)((UINT32)(descAddr) + AE531X_QUEUE_ELE_SIZE)
++
++/* Move the "current descriptor" forward to the next one */
++#define AE531X_CONSUME_DESC(q) \
++ q->curDescAddr = AE531X_QUEUE_ELE_NEXT_GET(q, q->curDescAddr)
++
++/*****************************************************************
++ * Per-ethernet-MAC OS-independent information
++ */
++typedef struct ae531x_MAC_s {
++ u32 unit; /* MAC unit ID */
++ u32 macBase; /* MAC base address */
++ u32 dmaBase; /* DMA base address */
++ u32 phyBase; /* PHY base address */
++ AE531X_QUEUE txQueue; /* Transmit descriptor queue */
++ AE531X_QUEUE rxQueue; /* Receive descriptor queue */
++ UINT16 txDescCount; /* Transmit descriptor count */
++ UINT16 rxDescCount; /* Receive descriptor count */
++ BOOL aeProcessRst; /* flag to indicate reset in progress */
++ BOOL port_is_up; /* flag to indicate port is up */
++ void *OSinfo; /* OS-dependent data */
++} ae531x_MAC_t;
++
++#define AE531X_TX_DESC_COUNT_DEFAULT 64 /* Transmit descriptors */
++#define AE531X_RX_DESC_COUNT_DEFAULT 64 /* Receive descriptors */
++
++
++/*****************************************************************
++ * Interfaces exported by the OS-independent MAC layer
++ */
++void ae531x_BeginResetMode(ae531x_MAC_t *MACInfo);
++void ae531x_EndResetMode(ae531x_MAC_t *MACInfo);
++BOOL ae531x_IsInResetMode(ae531x_MAC_t *MACInfo);
++int ae531x_RxQueueCreate(ae531x_MAC_t *MACInfo, AE531X_QUEUE *q,
++ char *pMem, int count);
++int ae531x_QueueDelete(struct ae531x_queue *q);
++void ae531x_DmaReset(ae531x_MAC_t *MACInfo);
++void ae531x_MACReset(ae531x_MAC_t *MACInfo);
++void ae531x_EnableComm(ae531x_MAC_t *MACInfo);
++void ae531x_DisableComm(ae531x_MAC_t *MACInfo);
++void ae531x_reset(ae531x_MAC_t *MACInfo);
++int ae531x_AllocateQueues(ae531x_MAC_t *MACInfo);
++void ae531x_FreeQueues(ae531x_MAC_t *MACInfo);
++void ae531x_QueueInit(AE531X_QUEUE *q, char *pMem, int count);
++UINT32 ae531x_ReadMacReg(ae531x_MAC_t *MACInfo, UINT32 reg);
++void ae531x_WriteMacReg(ae531x_MAC_t *MACInfo, UINT32 reg, UINT32 data);
++void ae531x_SetMacReg(ae531x_MAC_t *MACInfo, UINT32 reg, UINT32 val);
++void ae531x_ClearMacReg(ae531x_MAC_t *MACInfo, UINT32 reg, UINT32 val);
++void ae531x_SetDmaReg(ae531x_MAC_t *MACInfo, UINT32 reg, UINT32 val);
++void ae531x_ClearDmaReg(ae531x_MAC_t *MACInfo, UINT32 reg, UINT32 val);
++UINT32 ae531x_ReadDmaReg(ae531x_MAC_t *MACInfo, UINT32 reg);
++void ae531x_WriteDmaReg(ae531x_MAC_t *MACInfo, UINT32 reg, UINT32 data);
++UINT32 ae531x_ReadMiiReg(UINT32 phyBase, UINT32 reg);
++void ae531x_WriteMiiReg(UINT32 phyBase, UINT32 reg, UINT32 data);
++UINT16 ae531x_MiiRead(UINT32 phyBase, UINT32 phyAddr, UINT8 reg);
++void ae531x_MiiWrite(UINT32 phyBase, UINT32 phyAddr, UINT8 reg, UINT16 data);
++void ae531x_DmaIntEnable(ae531x_MAC_t *MACInfo);
++void ae531x_DmaIntDisable(ae531x_MAC_t *MACInfo);
++void ae531x_AckIntr(ae531x_MAC_t *MACInfo, UINT32 val);
++void *ae531x_rxbuf_alloc(ae531x_MAC_t *MACInfo, char **rxBptr, int *rxBSize);
++void ae531x_swptr_free(VIRT_ADDR txDesc);
++
++#endif /* _AE531XMAC_H_ */
+diff -urN linux-2.4.32.new/arch/mips/ar531x/ae531xreg.h linux-2.4.32.new-eth/arch/mips/ar531x/ae531xreg.h
+--- linux-2.4.32.new/arch/mips/ar531x/ae531xreg.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.4.32.new-eth/arch/mips/ar531x/ae531xreg.h 2005-12-25 11:54:20.834262096 +0000
+@@ -0,0 +1,437 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License. See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright © 2003 Atheros Communications, Inc., All Rights Reserved.
++ */
++
++/*
++ * See README to understand the decomposition of the ethernet driver.
++ *
++ * Register definitions for Atheros AR531X Ethernet MAC.
++ */
++
++#ifndef _AE531XREG_H_
++#define _AE531XREG_H_
++
++#define AE531X_MAC_OFFSET 0x0000
++#define AE531X_PHY_OFFSET 0x0000 /* Same as MAC offset */
++#define AE531X_DMA_OFFSET 0x1000
++
++/***********************************************************/
++/* MAC110 registers, base address is BAR+AE531X_MAC_OFFSET */
++/***********************************************************/
++#define MacControl 0x00 /* control */
++#define MacAddrHigh 0x04 /* address high */
++#define MacAddrLow 0x08 /* address low */
++#define MacMultiHashHigh 0x0C /* multicast hash table high */
++#define MacMultiHashLow 0x10 /* multicast hash table low */
++#define MacMiiAddr 0x14 /* MII address */
++#define MacMiiData 0x18 /* MII data */
++#define MacFlowControl 0x1C /* Flow control */
++#define MacVlan1Tag 0x4C /* VLAN1 tag */
++#define MacVlan2Tag 0x50 /* VLAN2 tag */
++
++
++/***************************************************************/
++/* DMA engine registers, base address is BAR+AE531X_DMA_OFFSET */
++/***************************************************************/
++#define DmaBusMode 0x00 /* CSR0 - Bus Mode */
++#define DmaTxPollDemand 0x04 /* CSR1 - Transmit Poll Demand */
++#define DmaRxPollDemand 0x08 /* CSR2 - Receive Poll Demand */
++#define DmaRxBaseAddr 0x0C /* CSR3 - Receive list base address */
++#define DmaTxBaseAddr 0x10 /* CSR4 - Transmit list base address */
++#define DmaStatus 0x14 /* CSR5 - Dma status */
++#define DmaControl 0x18 /* CSR6 - Dma control */
++#define DmaIntrEnb 0x1C /* CSR7 - Interrupt enable */
++#define DmaOverflowCnt 0x20 /* CSR8 - Missed Frame and Buff Overflow counter */
++#define DmaTxCurrAddr 0x50 /* CSR20 - Current host transmit buffer address */
++#define DmaRxCurrAddr 0x54 /* CSR21 - Current host receive buffer address */
++
++/**********************************************************/
++/* MAC Control register layout */
++/**********************************************************/
++#define MacFilterOff 0x80000000 /* Receive all incoming packets RW */
++#define MacFilterOn 0 /* Receive filtered packets only 0 */
++#define MacBigEndian 0x40000000 /* Big endian mode RW */
++#define MacLittleEndian 0 /* Little endian 0 */
++#define MacHeartBeatOff 0x10000000 /* Heartbeat signal qual disable RW*/
++#define MacHeartBeatOn 0 /* Heartbeat signal qual enable 0 */
++#define MacSelectSrl 0x08000000 /* Select SRL port RW */
++#define MacSelectMii 0 /* Select MII port 0 */
++#define MacDisableRxOwn 0x00800000 /* Disable receive own packets RW */
++#define MacEnableRxOwn 0 /* Enable receive own packets 0 */
++#define MacLoopbackExt 0x00400000 /* External loopback RW */
++#define MacLoopbackInt 0x00200000 /* Internal loopback */
++#define MacLoopbackOff 0 /* Normal mode 00 */
++#define MacFullDuplex 0x00100000 /* Full duplex mode RW */
++#define MacHalfDuplex 0 /* Half duplex mode 0 */
++#define MacMulticastFilterOff 0x00080000 /* Pass all multicast packets RW */
++#define MacMulticastFilterOn 0 /* Pass filtered mcast packets 0 */
++#define MacPromiscuousModeOn 0x00040000 /* Receive all valid packets RW 1 */
++#define MacPromiscuousModeOff 0 /* Receive filtered packets only */
++#define MacFilterInverse 0x00020000 /* Inverse filtering RW */
++#define MacFilterNormal 0 /* Normal filtering 0 */
++#define MacBadFramesEnable 0x00010000 /* Pass bad frames RW */
++#define MacBadFramesDisable 0 /* Do not pass bad frames 0 */
++#define MacPerfectFilterOff 0x00008000 /* Hash filtering only RW */
++#define MacPerfectFilterOn 0 /* Both perfect and hash filtering 0 */
++#define MacHashFilterOn 0x00002000 /* perform hash filtering RW */
++#define MacHashFilterOff 0 /* perfect filtering only 0 */
++#define MacLateCollisionOn 0x00001000 /* Enable late collision control RW */
++#define MacLateCollisionOff 0 /* Disable late collision control 0 */
++#define MacBroadcastDisable 0x00000800 /* Disable reception of bcast frames RW */
++#define MacBroadcastEnable 0 /* Enable broadcast frames 0 */
++#define MacRetryDisable 0x00000400 /* Disable retransmission RW */
++#define MacRetryEnable 0 /* Enable retransmission 0 */
++#define MacPadStripEnable 0x00000100 /* Pad stripping enable RW */
++#define MacPadStripDisable 0 /* Pad stripping disable 0 */
++#define MacBackoff 0 /* Backoff Limit RW 00 */
++#define MacDeferralCheckEnable 0x00000020 /* Deferral check enable RW */
++#define MacDeferralCheckDisable 0 /* Deferral check disable 0 */
++#define MacTxEnable 0x00000008 /* Transmitter enable RW */
++#define MacTxDisable 0 /* Transmitter disable 0 */
++#define MacRxEnable 0x00000004 /* Receiver enable RW */
++#define MacRxDisable 0 /* Receiver disable 0 */
++
++
++/**********************************************************/
++/* MII address register layout */
++/**********************************************************/
++#define MiiDevMask 0x0000F800 /* MII device address */
++#define MiiDevShift 11
++#define MiiRegMask 0x000007C0 /* MII register */
++#define MiiRegShift 6
++#define MiiWrite 0x00000002 /* Write to register */
++#define MiiRead 0 /* Read from register */
++#define MiiBusy 0x00000001 /* MII interface is busy */
++
++/**********************************************************/
++/* MII Data register layout */
++/**********************************************************/
++#define MiiDataMask 0x0000FFFF /* MII Data */
++
++/**********************************************************/
++/* MAC flow control register layout */
++/**********************************************************/
++#define MacPauseTimeMask 0xFFFF0000 /* PAUSE TIME field in ctrl frame */
++#define MacPauseTimeShift 15
++#define MacControlFrameEnable 0x00000004 /* Enable pass ctrl frames to host */
++#define MacControlFrameDisable 0 /* Do not pass ctrl frames to host */
++#define MacFlowControlEnable 0x00000002 /* Enable flow control */
++#define MacFlowControlDisable 0 /* Disable flow control */
++#define MacSendPauseFrame 0x00000001 /* send pause frame */
++
++/**********************************************************/
++/* DMA bus mode register layout */
++/**********************************************************/
++#define DmaRxAlign16 0x01000000 /* Force all rx buffers to align on odd hw bndry */
++#define DmaBigEndianDes 0x00100000 /* Big endian data buffer descriptors RW */
++#define DmaLittleEndianDesc 0 /* Little endian data descriptors */
++#define DmaBurstLength32 0x00002000 /* Dma burst length 32 RW */
++#define DmaBurstLength16 0x00001000 /* Dma burst length 16 */
++#define DmaBurstLength8 0x00000800 /* Dma burst length 8 */
++#define DmaBurstLength4 0x00000400 /* Dma burst length 4 */
++#define DmaBurstLength2 0x00000200 /* Dma burst length 2 */
++#define DmaBurstLength1 0x00000100 /* Dma burst length 1 */
++#define DmaBurstLength0 0x00000000 /* Dma burst length 0 */
++#define DmaBigEndianData 0x00000080 /* Big endian data buffers RW */
++#define DmaLittleEndianData 0 /* Little endian data buffers 0 */
++#define DmaDescriptorSkip16 0x00000040 /* number of dwords to skip RW */
++#define DmaDescriptorSkip8 0x00000020 /* between two unchained descriptors */
++#define DmaDescriptorSkip4 0x00000010
++#define DmaDescriptorSkip2 0x00000008
++#define DmaDescriptorSkip1 0x00000004
++#define DmaDescriptorSkip0 0
++#define DmaReceivePriorityOff 0x00000002 /* equal rx and tx priorities RW */
++#define DmaReceivePriorityOn 0 /* Rx has prioryty over Tx 0 */
++#define DmaResetOn 0x00000001 /* Reset DMA engine RW */
++#define DmaResetOff 0
++
++/**********************************************************/
++/* DMA Status register layout */
++/**********************************************************/
++#define DmaRxAbort 0x01000000 /* receiver bus abort R 0 */
++#define DmaTxAbort 0x00800000 /* transmitter bus abort R 0 */
++#define DmaTxState 0x00700000 /* Transmit process state R 000 */
++#define DmaTxStopped 0x00000000 /* Stopped */
++#define DmaTxFetching 0x00100000 /* Running - fetching the descriptor */
++#define DmaTxWaiting 0x00200000 /* Running - waiting for end of transmission */
++#define DmaTxReading 0x00300000 /* Running - reading the data from memory */
++#define DmaTxSuspended 0x00600000 /* Suspended */
++#define DmaTxClosing 0x00700000 /* Running - closing descriptor */
++#define DmaRxState 0x000E0000 /* Receive process state 000 */
++#define DmaRxStopped 0x00000000 /* Stopped */
++#define DmaRxFetching 0x00020000 /* Running - fetching the descriptor */
++#define DmaRxChecking 0x00040000 /* Running - checking for end of packet */
++#define DmaRxWaiting 0x00060000 /* Running - waiting for packet */
++#define DmaRxSuspended 0x00080000 /* Suspended */
++#define DmaRxClosing 0x000A0000 /* Running - closing descriptor */
++#define DmaRxFlushing 0x000C0000 /* Running - flushing the current frame */
++#define DmaRxQueuing 0x000E0000 /* Running - queuing the recieve frame into host memory */
++#define DmaIntNormal 0x00010000 /* Normal interrupt summary RW 0 */
++#define DmaIntAbnormal 0x00008000 /* Abnormal interrupt summary RW 0 */
++#define DmaIntEarlyRx 0x00004000 /* Early receive interrupt (Normal) RW 0 */
++#define DmaIntBusError 0x00002000 /* Fatal bus error (Abnormal) RW 0 */
++#define DmaIntEarlyTx 0x00000400 /* Early transmit interrupt RW 0 */
++#define DmaIntRxStopped 0x00000100 /* Receive process stopped (Abnormal) RW 0 */
++#define DmaIntRxNoBuffer 0x00000080 /* Receive buffer unavailable (Abnormal) RW 0*/
++#define DmaIntRxCompleted 0x00000040 /* Completion of frame reception(Normal) RW 0*/
++#define DmaIntTxUnderflow 0x00000020 /* Transmit underflow (Abnormal) RW 0 */
++#define DmaIntTxJabber 0x00000008 /* Transmit Jabber Timeout (Abnormal) RW 0 */
++#define DmaIntTxNoBuffer 0x00000004 /* Transmit buffer unavailable (Normal) RW 0*/
++#define DmaIntTxStopped 0x00000002 /* Transmit process stopped (Abnormal) RW 0 */
++#define DmaIntTxCompleted 0x00000001 /* Transmit completed (Normal) RW 0 */
++
++/**********************************************************/
++/* DMA control register layout */
++/**********************************************************/
++#define DmaStoreAndForward 0x00200000 /* Store and forward RW 0 */
++#define DmaTxThreshCtl256 0x0000c000 /* Non-SF threshold is 256 words */
++#define DmaTxThreshCtl128 0x00008000 /* Non-SF threshold is 128 words */
++#define DmaTxThreshCtl064 0x00004000 /* Non-SF threshold is 64 words */
++#define DmaTxThreshCtl032 0x00000000 /* Non-SF threshold is 32 words */
++#define DmaTxStart 0x00002000 /* Start/Stop transmission RW 0 */
++#define DmaTxSecondFrame 0x00000004 /* Operate on second frame RW 0 */
++#define DmaRxStart 0x00000002 /* Start/Stop reception RW 0 */
++
++/**********************************************************/
++/* DMA interrupt enable register layout */
++/**********************************************************/
++#define DmaIeNormal DmaIntNormal /* Normal interrupt enable RW 0 */
++#define DmaIeAbnormal DmaIntAbnormal /* Abnormal interrupt enable RW 0 */
++#define DmaIeEarlyRx DmaIntEarlyRx /* Early receive interrupt enable RW 0 */
++#define DmaIeBusError DmaIntBusError /* Fatal bus error enable RW 0 */
++#define DmaIeEarlyTx DmaIntEarlyTx /* Early transmit interrupt enable RW 0 */
++#define DmaIeRxStopped DmaIntRxStopped /* Receive process stopped enable RW 0 */
++#define DmaIeRxNoBuffer DmaIntRxNoBuffer /* Receive buffer unavailable enable RW 0 */
++#define DmaIeRxCompleted DmaIntRxCompleted /* Completion of frame reception enable RW 0 */
++#define DmaIeTxUnderflow DmaIntTxUnderflow /* Transmit underflow enable RW 0 */
++#define DmaIeTxJabber DmaIntTxJabber /* Transmit jabber timeout RW 0 */
++#define DmaIeTxNoBuffer DmaIntTxNoBuffer /* Transmit buffer unavailable enable RW 0 */
++#define DmaIeTxStopped DmaIntTxStopped /* Transmit process stopped enable RW 0 */
++#define DmaIeTxCompleted DmaIntTxCompleted /* Transmit completed enable RW 0 */
++
++/****************************************************************/
++/* DMA Missed Frame and Buffer Overflow Counter register layout */
++/****************************************************************/
++#define DmaRxBufferMissedFrame 0xffff0000 /* cleared on read */
++#define DmaMissedFrameShift 16
++#define DmaRxBufferOverflowCnt 0x0000ffff /* cleared on read */
++#define DmaMissedFrameCountMask 0x0000ffff
++
++/**********************************************************/
++/* DMA Engine descriptor layout */
++/**********************************************************/
++/* status word of DMA descriptor */
++#define DescOwnByDma 0x80000000 /* Descriptor is owned by DMA engine */
++#define DescFrameLengthMask 0x3FFF0000 /* Receive descriptor frame length */
++#define DescFrameLengthShift 16
++#define DescError 0x00008000 /* Error summary bit OR of following bits */
++#define DescRxTruncated 0x00004000 /* Rx - no more descs for receive frame */
++#define DescRxLengthError 0x00001000 /* Rx - frame size not matching with length field */
++#define DescRxRunt 0x00000800 /* Rx - runt frame, damaged by a
++ collision or term before 64 bytes */
++#define DescRxMulticast 0x00000400 /* Rx - received frame is multicast */
++#define DescRxFirst 0x00000200 /* Rx - first descriptor of the frame */
++#define DescRxLast 0x00000100 /* Rx - last descriptor of the frame */
++#define DescRxLongFrame 0x00000080 /* Rx - frame is longer than 1518 bytes */
++#define DescRxLateColl 0x00000040 /* Rx - frame was damaged by a late collision */
++#define DescRxFrameEther 0x00000020 /* Rx - Frame type Ethernet 802.3*/
++#define DescRxMiiError 0x00000008 /* Rx - error reported by MII interface */
++#define DescRxDribbling 0x00000004 /* Rx - frame contains noninteger multiple of 8 bits */
++#define DescRxCrc 0x00000002 /* Rx - CRC error */
++#define DescTxTimeout 0x00004000 /* Tx - Transmit jabber timeout */
++#define DescTxLostCarrier 0x00000800 /* Tx - carrier lost during tramsmission */
++#define DescTxNoCarrier 0x00000400 /* Tx - no carrier signal from tranceiver */
++#define DescTxLateCollision 0x00000200 /* Tx - transmission aborted due to collision */
++#define DescTxExcCollisions 0x00000100 /* Tx - transmission aborted after 16 collisions */
++#define DescTxHeartbeatFail 0x00000080 /* Tx - heartbeat collision check failure */
++#define DescTxCollMask 0x00000078 /* Tx - Collision count */
++#define DescTxCollShift 3
++#define DescTxExcDeferral 0x00000004 /* Tx - excessive deferral */
++#define DescTxUnderflow 0x00000002 /* Tx - late data arrival from memory */
++#define DescTxDeferred 0x00000001 /* Tx - frame transmision deferred */
++
++/* length word of DMA descriptor */
++#define DescTxIntEnable 0x80000000 /* Tx - interrupt on completion */
++#define DescTxLast 0x40000000 /* Tx - Last segment of the frame */
++#define DescTxFirst 0x20000000 /* Tx - First segment of the frame */
++#define DescTxDisableCrc 0x04000000 /* Tx - Add CRC disabled (first segment only) */
++#define DescEndOfRing 0x02000000 /* End of descriptors ring */
++#define DescChain 0x01000000 /* Second buffer address is chain address */
++#define DescTxDisablePadd 0x00800000 /* disable padding */
++#define DescSize2Mask 0x003FF800 /* Buffer 2 size */
++#define DescSize2Shift 11
++#define DescSize1Mask 0x000007FF /* Buffer 1 size */
++#define DescSize1Shift 0
++
++/**********************************************************/
++/* Initial register values */
++/**********************************************************/
++/* Full-duplex mode with perfect filter on */
++#define MacControlInitFdx \
++ ( MacFilterOn \
++ | MacLittleEndian \
++ | MacHeartBeatOn \
++ | MacSelectMii \
++ | MacEnableRxOwn \
++ | MacLoopbackOff \
++ | MacFullDuplex \
++ | MacMulticastFilterOn \
++ | MacPromiscuousModeOff \
++ | MacFilterNormal \
++ | MacBadFramesDisable \
++ | MacPerfectFilterOn \
++ | MacHashFilterOff \
++ | MacLateCollisionOff \
++ | MacBroadcastEnable \
++ | MacRetryEnable \
++ | MacPadStripDisable \
++ | MacDeferralCheckDisable \
++ | MacTxEnable \
++ | MacRxEnable)
++
++/* Full-duplex mode */
++#define MacFlowControlInitFdx \
++ ( MacControlFrameDisable \
++ | MacFlowControlEnable)
++
++/* Half-duplex mode with perfect filter on */
++#define MacControlInitHdx \
++ ( MacFilterOn \
++ | MacLittleEndian \
++ | MacHeartBeatOn \
++ | MacSelectMii \
++ | MacDisableRxOwn \
++ | MacLoopbackOff \
++ | MacHalfDuplex \
++ | MacMulticastFilterOn \
++ | MacPromiscuousModeOff \
++ | MacFilterNormal \
++ | MacBadFramesDisable \
++ | MacPerfectFilterOn \
++ | MacHashFilterOff \
++ | MacLateCollisionOff \
++ | MacBroadcastEnable \
++ | MacRetryEnable \
++ | MacPadStripDisable \
++ | MacDeferralCheckDisable \
++ | MacTxEnable \
++ | MacRxEnable)
++
++/* Half-duplex mode */
++#define MacFlowControlInitHdx \
++ ( MacControlFrameDisable \
++ | MacFlowControlDisable)
++
++/* Bus Mode Rx odd half word align */
++#define DmaBusModeInit \
++ ( DmaLittleEndianDesc \
++ | DmaRxAlign16 \
++ | DmaBurstLength4 \
++ | DmaBigEndianData \
++ | DmaDescriptorSkip1 \
++ | DmaReceivePriorityOn \
++ | DmaResetOff)
++
++#define DmaControlInit (DmaStoreAndForward)
++
++/* Interrupt groups */
++#define DmaIntEnable \
++ ( DmaIeNormal \
++ | DmaIeAbnormal \
++ | DmaIntBusError \
++ | DmaIntRxStopped \
++ | DmaIntTxUnderflow \
++ | DmaIntTxStopped)
++
++#define DmaIntDisable 0
++
++#define DmaAllIntCauseMask \
++ ( DmaIeNormal \
++ | DmaIeAbnormal \
++ | DmaIntEarlyRx \
++ | DmaIntBusError \
++ | DmaIntEarlyTx \
++ | DmaIntRxStopped \
++ | DmaIntRxNoBuffer \
++ | DmaIntRxCompleted \
++ | DmaIntTxUnderflow \
++ | DmaIntTxJabber \
++ | DmaIntTxNoBuffer \
++ | DmaIntTxStopped \
++ | DmaIntTxCompleted)
++
++#define UnhandledIntrMask \
++ (DmaAllIntCauseMask \
++ & ~(DmaIntRxNoBuffer \
++ | DmaIntTxStopped \
++ | DmaIntTxJabber \
++ | DmaIntTxUnderflow \
++ | DmaIntBusError \
++ | DmaIntRxCompleted ))
++
++#define DescRxErrors \
++ (DescRxTruncated \
++ | DescRxRunt \
++ | DescRxLateColl \
++ | DescRxMiiError \
++ | DescRxCrc)
++
++#define DescTxErrors \
++ ( DescTxTimeout \
++ | DescTxLateCollision \
++ | DescTxExcCollisions \
++ | DescTxExcDeferral \
++ | DescTxUnderflow)
++
++/**********************************************************/
++/* Descriptor Layout */
++/**********************************************************/
++#define AE531X_DESC_STATUS 0x00 /* Status offset */
++#define AE531X_DESC_CTRLEN 0x04 /* Control and Length offset */
++#define AE531X_DESC_BUFPTR 0x08 /* Buffer pointer offset */
++#define AE531X_DESC_LNKBUF 0x0c /* Link field offset, or ptr to 2nd buf */
++#define AE531X_DESC_SWPTR 0x10 /* OS-Dependent software pointer */
++
++#define AE531X_DESC_SIZE 0x10 /* 4 words, 16 bytes */
++#define AE531X_QUEUE_ELE_SIZE 0x14 /* with software pointer extension */
++
++/* Accessors to the dma descriptor fields */
++#define AE531X_DESC_STATUS_GET(ptr) \
++ *(volatile UINT32 *)((UINT32)(ptr) + AE531X_DESC_STATUS)
++
++#define AE531X_DESC_STATUS_SET(ptr, val) \
++ AE531X_DESC_STATUS_GET(ptr) = (val)
++
++#define AE531X_DESC_CTRLEN_GET(ptr) \
++ *(volatile UINT32 *)((UINT32)ptr + AE531X_DESC_CTRLEN)
++
++#define AE531X_DESC_CTRLEN_SET(ptr, val) \
++ AE531X_DESC_CTRLEN_GET(ptr) = (val)
++
++#define AE531X_DESC_BUFPTR_GET(ptr) \
++ *(volatile UINT32 *)((UINT32)ptr + AE531X_DESC_BUFPTR)
++
++#define AE531X_DESC_BUFPTR_SET(ptr,val) \
++ AE531X_DESC_BUFPTR_GET(ptr) = (UINT32)(val)
++
++#define AE531X_DESC_LNKBUF_GET(ptr) \
++ *(volatile UINT32 *)((UINT32)ptr + AE531X_DESC_LNKBUF)
++
++#define AE531X_DESC_LNKBUF_SET(ptr, val) \
++ AE531X_DESC_LNKBUF_GET(ptr) = (val)
++
++#define AE531X_DESC_SWPTR_GET(ptr) \
++ (void *)(*(volatile UINT32 *) ((UINT32)ptr + AE531X_DESC_SWPTR))
++
++#define AE531X_DESC_SWPTR_SET(ptr,val) \
++ AE531X_DESC_SWPTR_GET(ptr) = (void *)(val)
++
++/* Get size of Rx data from desc, in bytes */
++#define AE531X_DESC_STATUS_RX_SIZE(x) \
++ (((x) & DescFrameLengthMask) >> DescFrameLengthShift)
++
++#endif /* _AE531XREG_H_ */
+diff -urN linux-2.4.32.new/arch/mips/ar531x/Makefile linux-2.4.32.new-eth/arch/mips/ar531x/Makefile
+--- linux-2.4.32.new/arch/mips/ar531x/Makefile 2005-12-24 20:29:42.010325312 +0000
++++ linux-2.4.32.new-eth/arch/mips/ar531x/Makefile 2005-12-25 12:03:16.213872024 +0000
+@@ -28,6 +28,13 @@
+ ar531xirq.o \
+ ar531xintr.o \
+ ar531xgpio.o \
+- ar531xksyms.o
++ ar531xksyms.o \
++ ae531xlnx.o \
++ ae531xmac.o
+
+ include $(TOPDIR)/Rules.make
++obj-$(CONFIG_MARVELL_ENET_PHY) += mvPhy.o
++obj-$(CONFIG_KENDIN_ENET_PHY)) += rtPhy.o
++obj-$(CONFIG_REALTEK_ENET_PHY) += rtPhy.o
++
++
+diff -urN linux-2.4.32.new/arch/mips/ar531x/mvPhy.c linux-2.4.32.new-eth/arch/mips/ar531x/mvPhy.c
+--- linux-2.4.32.new/arch/mips/ar531x/mvPhy.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.4.32.new-eth/arch/mips/ar531x/mvPhy.c 2005-12-25 11:54:39.730389448 +0000
+@@ -0,0 +1,1237 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License. See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright © 2003 Atheros Communications, Inc., All Rights Reserved.
++ */
++
++/*
++* Manage the ethernet PHY switch, Marvell 88E6060.
++*
++* This module is intended to be largely OS and platform-independent.
++*/
++
++#if defined(linux)
++#include <linux/config.h>
++#include <linux/types.h>
++#include <linux/netdevice.h>
++#include <linux/etherdevice.h>
++#include <linux/delay.h>
++
++#include "ar531xlnx.h"
++#endif
++
++#if defined(__ECOS)
++#include "ae531xecos.h"
++#endif
++
++
++#include "ae531xmac.h"
++#include "ae531xreg.h"
++#include "mvPhy.h"
++
++#if /* DEBUG */ 1
++#define MV_DEBUG_ERROR 0x00000001
++#define MV_DEBUG_PHYSETUP 0x00000002
++#define MV_DEBUG_PHYCHANGE 0x00000004
++
++int mvPhyDebug = MV_DEBUG_ERROR;
++
++#define MV_PRINT(FLG, X) \
++{ \
++ if (mvPhyDebug & (FLG)) { \
++ DEBUG_PRINTF X; \
++ } \
++}
++#else
++#define MV_PRINT(FLG, X)
++#endif
++
++#ifdef CONFIG_VENETDEV
++/*
++ * On AR5312 with CONFIG_VENETDEV==1,
++ * ports 0..3 are LAN ports (accessed through ae0)
++ * port 4 is the WAN port. (accessed through ae1)
++ *
++ * The phy switch settings in the mvPhyInfo table are set accordingly.
++ */
++#define MV_WAN_PORT 4
++#define MV_IS_LAN_PORT(port) ((port) < MV_WAN_PORT)
++#define MV_IS_WAN_PORT(port) ((port) == MV_WAN_PORT)
++#endif
++
++/*
++ * Track per-PHY port information.
++ */
++typedef struct {
++ BOOL isEnetPort; /* normal enet port */
++ BOOL isPhyAlive; /* last known state of link */
++ int ethUnit; /* MAC associated with this phy port */
++ UINT32 phyBase;
++ UINT32 phyAddr; /* PHY registers associated with this phy port */
++ UINT32 switchPortAddr; /* switch port regs assoc'ed with this phy port */
++ UINT32 VLANTableSetting; /* Value to be written to VLAN table */
++} mvPhyInfo_t;
++
++/******************************************************************************
++ * Per-PHY information, indexed by PHY unit number.
++ *
++ * This table is board-dependent. It includes information
++ * about which enet MAC controls which PHY port.
++ */
++mvPhyInfo_t mvPhyInfo[] = {
++ /*
++ * On AP30/AR5312, all PHYs are associated with MAC0.
++ * AP30/AR5312's MAC1 isn't used for anything.
++ * CONFIG_VENETDEV==1 (router) configuration:
++ * Ports 0,1,2, and 3 are "LAN ports"
++ * Port 4 is a WAN port
++ * Port 5 connects to MAC0 in the AR5312
++ * CONFIG_VENETDEV==0 (bridge) configuration:
++ * Ports 0,1,2,3,4 are "LAN ports"
++ * Port 5 connects to the MAC0 in the AR5312
++ */
++ {isEnetPort: TRUE, /* phy port 0 -- LAN port 0 */
++ isPhyAlive: FALSE,
++ ethUnit: 0,
++ phyBase: 0,
++ phyAddr: 0x10,
++ switchPortAddr: 0x18,
++#ifdef CONFIG_VENETDEV
++ VLANTableSetting: 0x2e
++#else
++ VLANTableSetting: 0x3e
++#endif
++ },
++
++ {isEnetPort: TRUE, /* phy port 1 -- LAN port 1 */
++ isPhyAlive: FALSE,
++ ethUnit: 0,
++ phyBase: 0,
++ phyAddr: 0x11,
++ switchPortAddr: 0x19,
++#ifdef CONFIG_VENETDEV
++ VLANTableSetting: 0x2d
++#else
++ VLANTableSetting: 0x3d
++#endif
++ },
++
++ {isEnetPort: TRUE, /* phy port 2 -- LAN port 2 */
++ isPhyAlive: FALSE,
++ ethUnit: 0,
++ phyBase: 0,
++ phyAddr: 0x12,
++ switchPortAddr: 0x1a,
++#ifdef CONFIG_VENETDEV
++ VLANTableSetting: 0x2b
++#else
++ VLANTableSetting: 0x3b
++#endif
++ },
++
++ {isEnetPort: TRUE, /* phy port 3 -- LAN port 3 */
++ isPhyAlive: FALSE,
++ ethUnit: 0,
++ phyBase: 0,
++ phyAddr: 0x13,
++ switchPortAddr: 0x1b,
++#ifdef CONFIG_VENETDEV
++ VLANTableSetting: 0x27
++#else
++ VLANTableSetting: 0x37
++#endif
++ },
++
++ {isEnetPort: TRUE, /* phy port 4 -- WAN port or LAN port 4 */
++ isPhyAlive: FALSE,
++ ethUnit: 0,
++ phyBase: 0,
++ phyAddr: 0x14,
++ switchPortAddr: 0x1c,
++#ifdef CONFIG_VENETDEV
++ VLANTableSetting: 0x1020 /* WAN port */
++#else
++ VLANTableSetting: 0x2f /* LAN port 4 */
++#endif
++ },
++
++ {isEnetPort: FALSE, /* phy port 5 -- CPU port (no RJ45 connector) */
++ isPhyAlive: TRUE,
++ ethUnit: 0,
++ phyBase: 0,
++ phyAddr: 0x15,
++ switchPortAddr: 0x1d,
++#ifdef CONFIG_VENETDEV
++ VLANTableSetting: 0x0f /* Send only to LAN ports */
++#else
++ VLANTableSetting: 0x1f /* Send to all ports */
++#endif
++ },
++};
++
++#define MV_PHY_MAX (sizeof(mvPhyInfo) / sizeof(mvPhyInfo[0]))
++
++/* Range of valid PHY IDs is [MIN..MAX] */
++#define MV_ID_MIN 0
++#define MV_ID_MAX (MV_PHY_MAX-1)
++
++/* Convenience macros to access myPhyInfo */
++#define MV_IS_ENET_PORT(phyUnit) (mvPhyInfo[phyUnit].isEnetPort)
++#define MV_IS_PHY_ALIVE(phyUnit) (mvPhyInfo[phyUnit].isPhyAlive)
++#define MV_ETHUNIT(phyUnit) (mvPhyInfo[phyUnit].ethUnit)
++#define MV_PHYBASE(phyUnit) (mvPhyInfo[phyUnit].phyBase)
++#define MV_PHYADDR(phyUnit) (mvPhyInfo[phyUnit].phyAddr)
++#define MV_SWITCH_PORT_ADDR(phyUnit) (mvPhyInfo[phyUnit].switchPortAddr)
++#define MV_VLAN_TABLE_SETTING(phyUnit) (mvPhyInfo[phyUnit].VLANTableSetting)
++
++#define MV_IS_ETHUNIT(phyUnit, ethUnit) \
++ (MV_IS_ENET_PORT(phyUnit) && \
++ MV_ETHUNIT(phyUnit) == (ethUnit))
++
++
++/* Forward references */
++BOOL mv_phyIsLinkAlive(int phyUnit);
++LOCAL void mv_VLANInit(int ethUnit);
++LOCAL void mv_enableConfiguredPorts(int ethUnit);
++LOCAL void mv_verifyReady(int ethUnit);
++BOOL mv_phySetup(int ethUnit, UINT32 phyBase);
++BOOL mv_phyIsFullDuplex(int ethUnit);
++BOOL mv_phyIsSpeed100(int phyUnit);
++LOCAL BOOL mv_validPhyId(int phyUnit);
++void mv_flushATUDB(int phyUnit);
++void mv_phyCheckStatusChange(int ethUnit);
++#if DEBUG
++void mv_phyShow(int phyUnit);
++void mv_phySet(int phyUnit, UINT32 regnum, UINT32 value);
++void mv_switchPortSet(int phyUnit, UINT32 regnum, UINT32 value);
++void mv_switchGlobalSet(int phyUnit, UINT32 regnum, UINT32 value);
++void mv_showATUDB(int phyUnit);
++void mv_countGoodFrames(int phyUnit);
++void mv_countBadFrames(int phyUnit);
++void mv_showFrameCounts(int phyUnit);
++#endif
++
++
++/******************************************************************************
++*
++* mv_phyIsLinkAlive - test to see if the specified link is alive
++*
++* RETURNS:
++* TRUE --> link is alive
++* FALSE --> link is down
++*/
++BOOL
++mv_phyIsLinkAlive(int phyUnit)
++{
++ UINT16 phyHwStatus;
++ UINT32 phyBase;
++ UINT32 phyAddr;
++
++ phyBase = MV_PHYBASE(phyUnit);
++ phyAddr = MV_PHYADDR(phyUnit);
++
++ phyHwStatus = phyRegRead(phyBase, phyAddr, MV_PHY_SPECIFIC_STATUS);
++
++ if (phyHwStatus & MV_STATUS_REAL_TIME_LINK_UP) {
++ return TRUE;
++ } else {
++ return FALSE;
++ }
++}
++
++/******************************************************************************
++*
++* mv_VLANInit - initialize "port-based VLANs" for the specified enet unit.
++*/
++LOCAL void
++mv_VLANInit(int ethUnit)
++{
++ int phyUnit;
++ UINT32 phyBase;
++ UINT32 switchPortAddr;
++
++ for (phyUnit=0; phyUnit < MV_PHY_MAX; phyUnit++) {
++ if (MV_ETHUNIT(phyUnit) != ethUnit) {
++ continue;
++ }
++
++ phyBase = MV_PHYBASE(phyUnit);
++ switchPortAddr = MV_SWITCH_PORT_ADDR(phyUnit);
++
++ phyRegWrite(phyBase, switchPortAddr, MV_PORT_BASED_VLAN_MAP,
++ MV_VLAN_TABLE_SETTING(phyUnit));
++ }
++}
++
++#define phyPortConfigured(phyUnit) TRUE /* TBDFREEDOM2 */
++
++/******************************************************************************
++*
++* mv_enableConfiguredPorts - enable whichever PHY ports are supposed
++* to be enabled according to administrative configuration.
++*/
++LOCAL void
++mv_enableConfiguredPorts(int ethUnit)
++{
++ int phyUnit;
++ UINT32 phyBase;
++ UINT32 switchPortAddr;
++ UINT16 portControl;
++ UINT16 portAssociationVector;
++
++ for (phyUnit=0; phyUnit < MV_PHY_MAX; phyUnit++) {
++ if (MV_ETHUNIT(phyUnit) != ethUnit) {
++ continue;
++ }
++
++ phyBase = MV_PHYBASE(phyUnit);
++ switchPortAddr = MV_SWITCH_PORT_ADDR(phyUnit);
++
++ if (phyPortConfigured(phyUnit)) {
++
++ portControl = MV_PORT_CONTROL_PORT_STATE_FORWARDING;
++#ifdef CONFIG_VENETDEV
++ if (!MV_IS_ENET_PORT(phyUnit)) { /* CPU port */
++ portControl |= MV_PORT_CONTROL_INGRESS_TRAILER
++ | MV_PORT_CONTROL_EGRESS_MODE;
++ }
++#endif
++ phyRegWrite(phyBase, switchPortAddr, MV_PORT_CONTROL, portControl);
++
++ if (MV_IS_ENET_PORT(phyUnit)) {
++ portAssociationVector = 1 << phyUnit;
++ } else {
++ /* Disable learning on the CPU port */
++ portAssociationVector = 0;
++ }
++ phyRegWrite(phyBase, switchPortAddr,
++ MV_PORT_ASSOCIATION_VECTOR, portAssociationVector);
++ }
++ }
++}
++
++/******************************************************************************
++*
++* mv_verifyReady - validates that we're dealing with the device
++* we think we're dealing with, and that it's ready.
++*/
++LOCAL void
++mv_verifyReady(int ethUnit)
++{
++ int phyUnit;
++ UINT16 globalStatus;
++ UINT32 phyBase = 0;
++ UINT32 phyAddr;
++ UINT32 switchPortAddr;
++ UINT16 phyID1;
++ UINT16 phyID2;
++ UINT16 switchID;
++
++ /*
++ * The first read to the Phy port registers always fails and
++ * returns 0. So get things started with a bogus read.
++ */
++ for (phyUnit=0; phyUnit < MV_PHY_MAX; phyUnit++) {
++ if (!MV_IS_ETHUNIT(phyUnit, ethUnit)) {
++ continue;
++ }
++ phyBase = MV_PHYBASE(phyUnit);
++ phyAddr = MV_PHYADDR(phyUnit);
++
++ (void)phyRegRead(phyBase, phyAddr, MV_PHY_ID1); /* returns 0 */
++ break;
++ }
++
++ for (phyUnit=0; phyUnit < MV_PHY_MAX; phyUnit++) {
++ if (!MV_IS_ETHUNIT(phyUnit, ethUnit)) {
++ continue;
++ }
++
++ /*******************/
++ /* Verify phy port */
++ /*******************/
++ phyBase = MV_PHYBASE(phyUnit);
++ phyAddr = MV_PHYADDR(phyUnit);
++
++ phyID1 = phyRegRead(phyBase, phyAddr, MV_PHY_ID1);
++ if (phyID1 != MV_PHY_ID1_EXPECTATION) {
++ MV_PRINT(MV_DEBUG_PHYSETUP,
++ ("Invalid PHY ID1 for ethmac%d port%d. Expected 0x%04x, read 0x%04x\n",
++ ethUnit,
++ phyUnit,
++ MV_PHY_ID1_EXPECTATION,
++ phyID1));
++ return;
++ }
++
++ phyID2 = phyRegRead(phyBase, phyAddr, MV_PHY_ID2);
++ if ((phyID2 & MV_OUI_LSB_MASK) != MV_OUI_LSB_EXPECTATION) {
++ MV_PRINT(MV_DEBUG_PHYSETUP,
++ ("Invalid PHY ID2 for ethmac%d port %d. Expected 0x%04x, read 0x%04x\n",
++ ethUnit,
++ phyUnit,
++ MV_OUI_LSB_EXPECTATION,
++ phyID2));
++ return;
++ }
++
++ MV_PRINT(MV_DEBUG_PHYSETUP,
++ ("Found PHY ethmac%d port%d: model 0x%x revision 0x%x\n",
++ ethUnit,
++ phyUnit,
++ (phyID2 & MV_MODEL_NUM_MASK) >> MV_MODEL_NUM_SHIFT,
++ (phyID2 & MV_REV_NUM_MASK) >> MV_REV_NUM_SHIFT));
++
++
++ /**********************/
++ /* Verify switch port */
++ /**********************/
++ switchPortAddr = MV_SWITCH_PORT_ADDR(phyUnit);
++
++ switchID = phyRegRead(phyBase, switchPortAddr, MV_SWITCH_ID);
++ if ((switchID & MV_SWITCH_ID_DEV_MASK) !=
++ MV_SWITCH_ID_DEV_EXPECTATION) {
++
++ MV_PRINT(MV_DEBUG_PHYSETUP,
++ ("Invalid switch ID for ethmac%d port %d. Expected 0x%04x, read 0x%04x\n",
++ ethUnit,
++ phyUnit,
++ MV_SWITCH_ID_DEV_EXPECTATION,
++ switchID));
++ return;
++ }
++
++ MV_PRINT(MV_DEBUG_PHYSETUP,
++ ("Found PHY switch for enet %d port %d deviceID 0x%x revision 0x%x\n",
++ ethUnit,
++ phyUnit,
++ (switchID & MV_SWITCH_ID_DEV_MASK) >> MV_SWITCH_ID_DEV_SHIFT,
++ (switchID & MV_SWITCH_ID_REV_MASK) >> MV_SWITCH_ID_REV_SHIFT))
++ }
++
++ /*******************************/
++ /* Verify that switch is ready */
++ /*******************************/
++ if (phyBase) {
++ globalStatus = phyRegRead(phyBase, MV_SWITCH_GLOBAL_ADDR,
++ MV_SWITCH_GLOBAL_STATUS);
++
++ if (!(globalStatus & MV_SWITCH_STATUS_READY_MASK)) {
++ MV_PRINT(MV_DEBUG_PHYSETUP,
++ ("PHY switch for ethmac%d NOT ready!\n",
++ ethUnit));
++ }
++ } else {
++ MV_PRINT(MV_DEBUG_PHYSETUP,
++ ("No ports configured for ethmac%d\n", ethUnit));
++ }
++}
++
++/******************************************************************************
++*
++* mv_phySetup - reset and setup the PHY switch.
++*
++* Resets each PHY port.
++*
++* RETURNS:
++* TRUE --> at least 1 PHY with LINK
++* FALSE --> no LINKs on this ethernet unit
++*/
++BOOL
++mv_phySetup(int ethUnit, UINT32 phyBase)
++{
++ int phyUnit;
++ int liveLinks = 0;
++ BOOL foundPhy = FALSE;
++ UINT32 phyAddr;
++ UINT16 atuControl;
++
++ /*
++ * Allow platform-specific code to determine the default Ethernet MAC
++ * at run-time. If phyEthMacDefault returns a negative value, use the
++ * static mvPhyInfo table "as is". But if phyEthMacDefault returns a
++ * non-negative value, use it as the default ethernet unit.
++ */
++ {
++ int ethMacDefault = phyEthMacDefault();
++
++ if (ethMacDefault >= 0) {
++ for (phyUnit=0; phyUnit < MV_PHY_MAX; phyUnit++) {
++ MV_ETHUNIT(phyUnit)=ethMacDefault;
++ }
++ }
++ }
++
++ /*
++ * See if there's any configuration data for this enet,
++ * and set up phyBase in table.
++ */
++ for (phyUnit=0; phyUnit < MV_PHY_MAX; phyUnit++) {
++ if (MV_ETHUNIT(phyUnit) != ethUnit) {
++ continue;
++ }
++
++ MV_PHYBASE(phyUnit) = phyBase;
++ foundPhy = TRUE;
++ }
++
++ if (!foundPhy) {
++ return FALSE; /* No PHY's configured for this ethUnit */
++ }
++
++ /* Verify that the switch is what we think it is, and that it's ready */
++ mv_verifyReady(ethUnit);
++
++ /* Initialize global switch settings */
++ atuControl = MV_ATUCTRL_AGE_TIME_DEFAULT << MV_ATUCTRL_AGE_TIME_SHIFT;
++ atuControl |= MV_ATUCTRL_ATU_SIZE_DEFAULT << MV_ATUCTRL_ATU_SIZE_SHIFT;
++ // atuControl |= MV_ATUCTRL_ATU_LEARNDIS;
++ phyRegWrite(phyBase, MV_SWITCH_GLOBAL_ADDR, MV_ATU_CONTROL, atuControl);
++
++ /* Reset PHYs and start autonegoation on each. */
++ for (phyUnit=0; phyUnit < MV_PHY_MAX; phyUnit++) {
++ if (MV_ETHUNIT(phyUnit) != ethUnit) {
++ continue;
++ }
++
++ phyBase = MV_PHYBASE(phyUnit);
++ phyAddr = MV_PHYADDR(phyUnit);
++
++ phyRegWrite(phyBase, phyAddr, MV_PHY_CONTROL,
++ MV_CTRL_SOFTWARE_RESET | MV_CTRL_AUTONEGOTIATION_ENABLE);
++ }
++
++ {
++ int timeout;
++ UINT16 phyHwStatus;
++
++ /*
++ * Wait 5 seconds for ALL associated PHYs to finish autonegotiation.
++ */
++ timeout=50;
++ for (phyUnit=0; (phyUnit < MV_PHY_MAX) && (timeout > 0); phyUnit++) {
++ if (!MV_IS_ETHUNIT(phyUnit, ethUnit)) {
++ continue;
++ }
++ for (;;) {
++ phyBase = MV_PHYBASE(phyUnit);
++ phyAddr = MV_PHYADDR(phyUnit);
++
++ phyHwStatus = phyRegRead(phyBase, phyAddr, MV_PHY_SPECIFIC_STATUS);
++
++ if (MV_AUTONEG_DONE(phyHwStatus)) {
++ break;
++ }
++
++ if (--timeout == 0) {
++ break;
++ }
++
++ sysMsDelay(100);
++ }
++ }
++ }
++
++ /*
++ * All PHYs have had adequate time to autonegotiate.
++ * Now initialize software status.
++ *
++ * It's possible that some ports may take a bit longer
++ * to autonegotiate; but we can't wait forever. They'll
++ * get noticed by mv_phyCheckStatusChange during regular
++ * polling activities.
++ */
++ for (phyUnit=0; phyUnit < MV_PHY_MAX; phyUnit++) {
++ if (!MV_IS_ETHUNIT(phyUnit, ethUnit)) {
++ continue;
++ }
++
++ if (mv_phyIsLinkAlive(phyUnit)) {
++ liveLinks++;
++ MV_IS_PHY_ALIVE(phyUnit) = TRUE;
++#ifdef DEBUG
++ mv_phyShow(phyUnit);
++#endif
++ } else {
++ MV_IS_PHY_ALIVE(phyUnit) = FALSE;
++ }
++
++ MV_PRINT(MV_DEBUG_PHYSETUP,
++ ("ethmac%d: Phy Status=%4.4x\n",
++ ethUnit,
++ phyRegRead(MV_PHYBASE(phyUnit),
++ MV_PHYADDR(phyUnit),
++ MV_PHY_SPECIFIC_STATUS)));
++
++ }
++
++#ifdef DEBUG
++ /* PHY 5 is the connection to the CPU */
++ mv_phyShow(5);
++#endif
++
++ mv_VLANInit(ethUnit);
++
++ mv_enableConfiguredPorts(ethUnit);
++
++ return (liveLinks > 0);
++}
++
++
++/******************************************************************************
++*
++* mv_phyIsDuplexFull - Determines whether the phy ports associated with the
++* specified device are FULL or HALF duplex.
++*
++* RETURNS:
++* TRUE --> at least one associated PHY in FULL DUPLEX
++* FALSE --> all half duplex, or no links
++*/
++BOOL
++mv_phyIsFullDuplex(int ethUnit)
++{
++ int phyUnit;
++ UINT32 phyBase;
++ UINT32 phyAddr;
++ UINT16 phyHwStatus;
++
++ for (phyUnit=0; phyUnit < MV_PHY_MAX; phyUnit++) {
++
++ if (!MV_IS_ETHUNIT(phyUnit, ethUnit)) {
++ continue;
++ }
++
++ if (mv_phyIsLinkAlive(phyUnit)) {
++
++ phyBase = MV_PHYBASE(phyUnit);
++ phyAddr = MV_PHYADDR(phyUnit);
++
++ phyHwStatus = phyRegRead(phyBase, phyAddr, MV_PHY_SPECIFIC_STATUS);
++
++ if (phyHwStatus & MV_STATUS_RESOLVED_DUPLEX_FULL) {
++ return TRUE;
++ }
++ }
++ }
++
++ return FALSE;
++}
++
++/******************************************************************************
++*
++* mv_phyIsSpeed100 - Determines the speed of a phy port
++*
++* RETURNS:
++* TRUE --> PHY operating at 100 Mbit
++* FALSE --> link down, or not operating at 100 Mbit
++*/
++BOOL
++mv_phyIsSpeed100(int phyUnit)
++{
++ UINT16 phyHwStatus;
++ UINT32 phyBase;
++ UINT32 phyAddr;
++
++ if (MV_IS_ENET_PORT(phyUnit)) {
++ if (mv_phyIsLinkAlive(phyUnit)) {
++
++ phyBase = MV_PHYBASE(phyUnit);
++ phyAddr = MV_PHYADDR(phyUnit);
++
++ phyHwStatus = phyRegRead(phyBase, phyAddr, MV_PHY_SPECIFIC_STATUS);
++
++ if (phyHwStatus & MV_STATUS_RESOLVED_SPEED_100) {
++ return TRUE;
++ }
++ }
++ }
++
++ return FALSE;
++}
++
++#ifdef CONFIG_VENETDEV
++/******************************************************************************
++*
++* mv_phyDetermineSource - Examine a received frame's Egress Trailer
++* to determine whether it came from a LAN or WAN port.
++*
++* RETURNS:
++* Returns 1-->LAN, 0-->WAN, -1-->ERROR
++*/
++int
++mv_phyDetermineSource(char *data, int len)
++{
++ unsigned char *phyTrailer;
++ unsigned char incomingPort;
++
++ phyTrailer = &data[len - MV_PHY_TRAILER_SIZE];
++
++ /* ASSERT(phyTrailer[0] == MV_EGRESS_TRAILER_VALID); */
++ if (phyTrailer[0] != MV_EGRESS_TRAILER_VALID) {
++ printk(KERN_ERR "PHY trailer invalid; got %#02x, expected %#02x\n",
++ phyTrailer[0], MV_EGRESS_TRAILER_VALID);
++ return -1;
++ }
++
++ incomingPort = phyTrailer[1];
++ if (MV_IS_LAN_PORT(incomingPort)) {
++ return 1;
++ } else {
++ /* ASSERT(MV_IS_WAN_PORT(incomingPort)); */
++ if (!MV_IS_WAN_PORT(incomingPort)) {
++ printk(KERN_ERR "incoming port was %d; expected 0-4\n", incomingPort);
++ return -1;
++ }
++ return 0;
++ }
++}
++
++
++/******************************************************************************
++*
++* mv_phySetDestinationPort - Set the Ingress Trailer to force the
++* frame to be sent to LAN or WAN, as specified.
++*
++*/
++void
++mv_phySetDestinationPort(char *data, int len, int fromLAN)
++{
++ char *phyTrailer;
++
++ phyTrailer = &data[len];
++ if (fromLAN) {
++ /* LAN ports: Use default settings, as per mvPhyInfo */
++ phyTrailer[0] = 0x00;
++ phyTrailer[1] = 0x00;
++ } else {
++ /* WAN port: Direct to WAN port */
++ phyTrailer[0] = MV_INGRESS_TRAILER_OVERRIDE;
++ phyTrailer[1] = 1 << MV_WAN_PORT;
++ }
++ phyTrailer[2] = 0x00;
++ phyTrailer[3] = 0x00;
++}
++#endif
++
++
++/*****************************************************************************
++*
++* Validate that the specified PHY unit number is a valid PHY ID.
++* Print a message if it is invalid.
++* RETURNS
++* TRUE --> valid
++* FALSE --> invalid
++*/
++LOCAL BOOL
++mv_validPhyId(int phyUnit)
++{
++ if ((phyUnit >= MV_ID_MIN) && (phyUnit <= MV_ID_MAX)) {
++ return TRUE;
++ } else {
++ PRINTF("PHY unit number must be in the range [%d..%d]\n",
++ MV_ID_MIN, MV_ID_MAX);
++ return FALSE;
++ }
++}
++
++
++/*****************************************************************************
++*
++* mv_waitWhileATUBusy - spins until the ATU completes
++* its previous operation.
++*/
++LOCAL void
++mv_waitWhileATUBusy(UINT32 phyBase)
++{
++ BOOL isBusy;
++ UINT16 ATUOperation;
++
++ do {
++
++ ATUOperation = phyRegRead(phyBase, MV_SWITCH_GLOBAL_ADDR,
++ MV_ATU_OPERATION);
++
++ isBusy = (ATUOperation & MV_ATU_BUSY_MASK) == MV_ATU_IS_BUSY;
++
++ } while(isBusy);
++}
++
++/*****************************************************************************
++*
++* mv_flushATUDB - flushes ALL entries in the Address Translation Unit
++* DataBase associated with phyUnit. [Since we use a single DB for
++* all PHYs, this flushes the entire shared DataBase.]
++*
++* The current implementation flushes even more than absolutely needed --
++* it flushes all entries for all phyUnits on the same ethernet as the
++* specified phyUnit.
++*
++* It is called only when a link failure is detected on a port that was
++* previously working. In other words, when the cable is unplugged.
++*/
++void
++mv_flushATUDB(int phyUnit)
++{
++ UINT32 phyBase;
++
++ if (!mv_validPhyId(phyUnit)) {
++ PRINTF("Invalid port number: %d\n", phyUnit);
++ return;
++ }
++
++ phyBase = MV_PHYBASE(phyUnit);
++
++ /* Wait for previous operation (if any) to complete */
++ mv_waitWhileATUBusy(phyBase);
++
++ /* Tell hardware to flush all entries */
++ phyRegWrite(phyBase, MV_SWITCH_GLOBAL_ADDR, MV_ATU_OPERATION,
++ MV_ATU_OP_FLUSH_ALL | MV_ATU_IS_BUSY);
++
++ mv_waitWhileATUBusy(phyBase);
++}
++
++/*****************************************************************************
++*
++* mv_phyCheckStatusChange -- checks for significant changes in PHY state.
++*
++* A "significant change" is:
++* dropped link (e.g. ethernet cable unplugged) OR
++* autonegotiation completed + link (e.g. ethernet cable plugged in)
++*/
++void
++mv_phyCheckStatusChange(int ethUnit)
++{
++ int phyUnit;
++ UINT16 phyHwStatus;
++ mvPhyInfo_t *lastStatus;
++ int linkCount = 0;
++ int lostLinks = 0;
++ int gainedLinks = 0;
++ UINT32 phyBase;
++ UINT32 phyAddr;
++
++ for (phyUnit=0; phyUnit < MV_PHY_MAX; phyUnit++) {
++ if (!MV_IS_ETHUNIT(phyUnit, ethUnit)) {
++ continue;
++ }
++
++ phyBase = MV_PHYBASE(phyUnit);
++ phyAddr = MV_PHYADDR(phyUnit);
++
++ lastStatus = &mvPhyInfo[phyUnit];
++ phyHwStatus = phyRegRead(phyBase, phyAddr, MV_PHY_SPECIFIC_STATUS);
++
++ if (lastStatus->isPhyAlive) { /* last known link status was ALIVE */
++ /* See if we've lost link */
++ if (phyHwStatus & MV_STATUS_REAL_TIME_LINK_UP) {
++ linkCount++;
++ } else {
++ lostLinks++;
++ mv_flushATUDB(phyUnit);
++ MV_PRINT(MV_DEBUG_PHYCHANGE,("\nethmac%d port%d down\n",
++ ethUnit, phyUnit));
++ lastStatus->isPhyAlive = FALSE;
++ }
++ } else { /* last known link status was DEAD */
++ /* Check for AutoNegotiation complete */
++ if (MV_AUTONEG_DONE(phyHwStatus)) {
++ gainedLinks++;
++ linkCount++;
++ MV_PRINT(MV_DEBUG_PHYCHANGE,("\nethmac%d port%d up\n",
++ ethUnit, phyUnit));
++ lastStatus->isPhyAlive = TRUE;
++ }
++ }
++ }
++
++ if (linkCount == 0) {
++ if (lostLinks) {
++ /* We just lost the last link for this MAC */
++ phyLinkLost(ethUnit);
++ }
++ } else {
++ if (gainedLinks == linkCount) {
++ /* We just gained our first link(s) for this MAC */
++ phyLinkGained(ethUnit);
++ }
++ }
++}
++
++#if DEBUG
++
++/* Define the registers of interest for a phyShow command */
++typedef struct mvRegisterTableEntry_s {
++ UINT32 regNum;
++ char *regIdString;
++} mvRegisterTableEntry_t;
++
++mvRegisterTableEntry_t mvPhyRegisterTable[] = {
++ {MV_PHY_CONTROL, "PHY Control "},
++ {MV_PHY_STATUS, "PHY Status "},
++ {MV_PHY_ID1, "PHY Identifier 1 "},
++ {MV_PHY_ID2, "PHY Identifier 2 "},
++ {MV_AUTONEG_ADVERT, "Auto-Negotiation Advertisement "},
++ {MV_LINK_PARTNER_ABILITY, "Link Partner Ability "},
++ {MV_AUTONEG_EXPANSION, "Auto-Negotiation Expansion "},
++ {MV_NEXT_PAGE_TRANSMIT, "Next Page Transmit "},
++ {MV_LINK_PARTNER_NEXT_PAGE, "Link Partner Next Page "},
++ {MV_PHY_SPECIFIC_CONTROL_1, "PHY-Specific Control Register 1 "},
++ {MV_PHY_SPECIFIC_STATUS, "PHY-Specific Status "},
++ {MV_PHY_INTERRUPT_ENABLE, "PHY Interrupt Enable "},
++ {MV_PHY_INTERRUPT_STATUS, "PHY Interrupt Status "},
++ {MV_PHY_INTERRUPT_PORT_SUMMARY, "PHY Interrupt Port Summary "},
++ {MV_RECEIVE_ERROR_COUNTER, "Receive Error Counter "},
++ {MV_LED_PARALLEL_SELECT, "LED Parallel Select "},
++ {MV_LED_STREAM_SELECT_LEDS, "LED Stream Select "},
++ {MV_PHY_LED_CONTROL, "PHY LED Control "},
++ {MV_PHY_MANUAL_LED_OVERRIDE, "PHY Manual LED Override "},
++ {MV_VCT_CONTROL, "VCT Control "},
++ {MV_VCT_STATUS, "VCT Status "},
++ {MV_PHY_SPECIFIC_CONTROL_2, "PHY-Specific Control Register 2 "},
++};
++int mvPhyNumRegs = sizeof(mvPhyRegisterTable) / sizeof(mvPhyRegisterTable[0]);
++
++
++mvRegisterTableEntry_t mvSwitchPortRegisterTable[] = {
++ {MV_PORT_STATUS, "Port Status "},
++ {MV_SWITCH_ID, "Switch ID "},
++ {MV_PORT_CONTROL, "Port Control "},
++ {MV_PORT_BASED_VLAN_MAP, "Port-Based VLAN Map "},
++ {MV_PORT_ASSOCIATION_VECTOR, "Port Association Vector "},
++ {MV_RX_COUNTER, "RX Counter "},
++ {MV_TX_COUNTER, "TX Counter "},
++};
++int mvSwitchPortNumRegs =
++ sizeof(mvSwitchPortRegisterTable) / sizeof(mvSwitchPortRegisterTable[0]);
++
++
++mvRegisterTableEntry_t mvSwitchGlobalRegisterTable[] = {
++ {MV_SWITCH_GLOBAL_STATUS, "Switch Global Status "},
++ {MV_SWITCH_MAC_ADDR0, "Switch MAC Addr 0 & 1 "},
++ {MV_SWITCH_MAC_ADDR2, "Switch MAC Addr 2 & 3 "},
++ {MV_SWITCH_MAC_ADDR4, "Switch MAC Addr 4 & 5 "},
++ {MV_SWITCH_GLOBAL_CONTROL, "Switch Global Control "},
++ {MV_ATU_CONTROL, "ATU Control "},
++ {MV_ATU_OPERATION, "ATU Operation "},
++ {MV_ATU_DATA, "ATU Data "},
++ {MV_ATU_MAC_ADDR0, "ATU MAC Addr 0 & 1 "},
++ {MV_ATU_MAC_ADDR2, "ATU MAC Addr 2 & 3 "},
++ {MV_ATU_MAC_ADDR4, "ATU MAC Addr 4 & 5 "},
++};
++int mvSwitchGlobalNumRegs =
++ sizeof(mvSwitchGlobalRegisterTable) / sizeof(mvSwitchGlobalRegisterTable[0]);
++
++
++/*****************************************************************************
++*
++* mv_phyShow - Dump the state of a PHY.
++* There are two sets of registers for each phy port:
++* "phy registers" and
++* "switch port registers"
++* We dump 'em all, plus the switch global registers.
++*/
++void
++mv_phyShow(int phyUnit)
++{
++ int i;
++ UINT16 value;
++ UINT32 phyBase;
++ UINT32 phyAddr;
++ UINT32 switchPortAddr;
++
++ if (!mv_validPhyId(phyUnit)) {
++ return;
++ }
++
++ phyBase = MV_PHYBASE(phyUnit);
++ phyAddr = MV_PHYADDR(phyUnit);
++ switchPortAddr = MV_SWITCH_PORT_ADDR(phyUnit);
++
++ PRINTF("PHY state for PHY%d (ethmac%d, phyBase 0x%8x, phyAddr 0x%x, switchAddr 0x%x)\n",
++ phyUnit,
++ MV_ETHUNIT(phyUnit),
++ MV_PHYBASE(phyUnit),
++ MV_PHYADDR(phyUnit),
++ MV_SWITCH_PORT_ADDR(phyUnit));
++
++ PRINTF("PHY Registers:\n");
++ for (i=0; i < mvPhyNumRegs; i++) {
++
++ value = phyRegRead(phyBase, phyAddr, mvPhyRegisterTable[i].regNum);
++
++ PRINTF("Reg %02d (0x%02x) %s = 0x%08x\n",
++ mvPhyRegisterTable[i].regNum,
++ mvPhyRegisterTable[i].regNum,
++ mvPhyRegisterTable[i].regIdString,
++ value);
++ }
++
++ PRINTF("Switch Port Registers:\n");
++ for (i=0; i < mvSwitchPortNumRegs; i++) {
++
++ value = phyRegRead(phyBase, switchPortAddr,
++ mvSwitchPortRegisterTable[i].regNum);
++
++ PRINTF("Reg %02d (0x%02x) %s = 0x%08x\n",
++ mvSwitchPortRegisterTable[i].regNum,
++ mvSwitchPortRegisterTable[i].regNum,
++ mvSwitchPortRegisterTable[i].regIdString,
++ value);
++ }
++
++ PRINTF("Switch Global Registers:\n");
++ for (i=0; i < mvSwitchGlobalNumRegs; i++) {
++
++ value = phyRegRead(phyBase, MV_SWITCH_GLOBAL_ADDR,
++ mvSwitchGlobalRegisterTable[i].regNum);
++
++ PRINTF("Reg %02d (0x%02x) %s = 0x%08x\n",
++ mvSwitchGlobalRegisterTable[i].regNum,
++ mvSwitchGlobalRegisterTable[i].regNum,
++ mvSwitchGlobalRegisterTable[i].regIdString,
++ value);
++ }
++}
++
++/*****************************************************************************
++*
++* mv_phySet - Modify the value of a PHY register (debug only).
++*/
++void
++mv_phySet(int phyUnit, UINT32 regnum, UINT32 value)
++{
++ UINT32 phyBase;
++ UINT32 phyAddr;
++
++ if (mv_validPhyId(phyUnit)) {
++
++ phyBase = MV_PHYBASE(phyUnit);
++ phyAddr = MV_PHYADDR(phyUnit);
++
++ phyRegWrite(phyBase, phyAddr, regnum, value);
++ }
++}
++
++
++/*****************************************************************************
++*
++* mv_switchPortSet - Modify the value of a switch port register (debug only).
++*/
++void
++mv_switchPortSet(int phyUnit, UINT32 regnum, UINT32 value)
++{
++ UINT32 phyBase;
++ UINT32 switchPortAddr;
++
++ if (mv_validPhyId(phyUnit)) {
++
++ phyBase = MV_PHYBASE(phyUnit);
++ switchPortAddr = MV_SWITCH_PORT_ADDR(phyUnit);
++
++ phyRegWrite(phyBase, switchPortAddr, regnum, value);
++ }
++}
++
++/*****************************************************************************
++*
++* mv_switchGlobalSet - Modify the value of a switch global register
++* (debug only).
++*/
++void
++mv_switchGlobalSet(int phyUnit, UINT32 regnum, UINT32 value)
++{
++ UINT32 phyBase;
++
++ if (mv_validPhyId(phyUnit)) {
++
++ phyBase = MV_PHYBASE(phyUnit);
++
++ phyRegWrite(phyBase, MV_SWITCH_GLOBAL_ADDR, regnum, value);
++ }
++}
++
++/*****************************************************************************
++*
++* mv_showATUDB - Dump the contents of the Address Translation Unit DataBase
++* for the PHY switch associated with the specified phy.
++*/
++void
++mv_showATUDB(int phyUnit)
++{
++ UINT32 phyBase;
++ UINT16 ATUData;
++ UINT16 ATUMac0;
++ UINT16 ATUMac2;
++ UINT16 ATUMac4;
++ int portVec;
++ int entryState;
++
++ if (!mv_validPhyId(phyUnit)) {
++ PRINTF("Invalid port number: %d\n", phyUnit);
++ return;
++ }
++
++ phyBase = MV_PHYBASE(phyUnit);
++
++ /* Wait for previous operation (if any) to complete */
++ mv_waitWhileATUBusy(phyBase);
++
++ /* Initialize ATU MAC to all 1's */
++ phyRegWrite(phyBase, MV_SWITCH_GLOBAL_ADDR, MV_ATU_MAC_ADDR0, 0xffff);
++ phyRegWrite(phyBase, MV_SWITCH_GLOBAL_ADDR, MV_ATU_MAC_ADDR2, 0xffff);
++ phyRegWrite(phyBase, MV_SWITCH_GLOBAL_ADDR, MV_ATU_MAC_ADDR4, 0xffff);
++
++ PRINTF(" MAC ADDRESS EntryState PortVector\n");
++
++ for(;;) {
++ /* Tell hardware to get next MAC info */
++ phyRegWrite(phyBase, MV_SWITCH_GLOBAL_ADDR, MV_ATU_OPERATION,
++ MV_ATU_OP_GET_NEXT | MV_ATU_IS_BUSY);
++
++ mv_waitWhileATUBusy(phyBase);
++
++ ATUData = phyRegRead(phyBase, MV_SWITCH_GLOBAL_ADDR, MV_ATU_DATA);
++ entryState = (ATUData & MV_ENTRYSTATE_MASK) >> MV_ENTRYSTATE_SHIFT;
++
++ if (entryState == 0) {
++ /* We've hit the end of the list */
++ break;
++ }
++
++ ATUMac0 = phyRegRead(phyBase, MV_SWITCH_GLOBAL_ADDR, MV_ATU_MAC_ADDR0);
++ ATUMac2 = phyRegRead(phyBase, MV_SWITCH_GLOBAL_ADDR, MV_ATU_MAC_ADDR2);
++ ATUMac4 = phyRegRead(phyBase, MV_SWITCH_GLOBAL_ADDR, MV_ATU_MAC_ADDR4);
++
++ portVec = (ATUData & MV_PORTVEC_MASK) >> MV_PORTVEC_SHIFT;
++
++ PRINTF("%02x:%02x:%02x:%02x:%02x:%02x 0x%02x 0x%02x\n",
++ ATUMac0 >> 8, /* MAC byte 0 */
++ ATUMac0 & 0xff, /* MAC byte 1 */
++ ATUMac2 >> 8, /* MAC byte 2 */
++ ATUMac2 & 0xff, /* MAC byte 3 */
++ ATUMac4 >> 8, /* MAC byte 4 */
++ ATUMac4 & 0xff, /* MAC byte 5 */
++ entryState,
++ portVec);
++ }
++}
++
++LOCAL BOOL countingGoodFrames;
++
++/*****************************************************************************
++*
++* mv_countGoodFrames - starts counting GOOD RX/TX frames per port
++*/
++void
++mv_countGoodFrames(int phyUnit)
++{
++ UINT32 phyBase;
++ UINT16 globalControl;
++
++ if (mv_validPhyId(phyUnit)) {
++ /*
++ * Guarantee that counters are cleared by
++ * forcing CtrMode to toggle and end on GOODFRAMES.
++ */
++
++ phyBase = MV_PHYBASE(phyUnit);
++
++ /* Read current Switch Global Control Register */
++ globalControl = phyRegRead(phyBase, MV_SWITCH_GLOBAL_ADDR,
++ MV_SWITCH_GLOBAL_CONTROL);
++
++ /* Set CtrMode to count BAD frames */
++ globalControl = ((globalControl & ~MV_CTRMODE_MASK) |
++ MV_CTRMODE_BADFRAMES);
++
++ /* Push new value out to hardware */
++ phyRegWrite(phyBase, MV_SWITCH_GLOBAL_ADDR,
++ MV_SWITCH_GLOBAL_CONTROL, globalControl);
++
++ /* Now toggle CtrMode to count GOOD frames */
++ globalControl = ((globalControl & ~MV_CTRMODE_MASK) |
++ MV_CTRMODE_GOODFRAMES);
++
++ /* Push new value out to hardware */
++ phyRegWrite(phyBase, MV_SWITCH_GLOBAL_ADDR,
++ MV_SWITCH_GLOBAL_CONTROL, globalControl);
++
++ countingGoodFrames = TRUE;
++ }
++}
++
++/*****************************************************************************
++*
++* mv_countBadFrames - starts counting BAD RX/TX frames per port
++*/
++void
++mv_countBadFrames(int phyUnit)
++{
++ UINT32 phyBase;
++ UINT16 globalControl;
++
++ if (mv_validPhyId(phyUnit)) {
++ /*
++ * Guarantee that counters are cleared by
++ * forcing CtrMode to toggle and end on BADFRAMES.
++ */
++
++ phyBase = MV_PHYBASE(phyUnit);
++
++ /* Read current Switch Global Control Register */
++ globalControl = phyRegRead(phyBase, MV_SWITCH_GLOBAL_ADDR,
++ MV_SWITCH_GLOBAL_CONTROL);
++
++ /* Set CtrMode to count GOOD frames */
++ globalControl = ((globalControl & ~MV_CTRMODE_MASK) |
++ MV_CTRMODE_GOODFRAMES);
++
++ /* Push new value out to hardware */
++ phyRegWrite(phyBase, MV_SWITCH_GLOBAL_ADDR,
++ MV_SWITCH_GLOBAL_CONTROL, globalControl);
++
++ /* Now toggle CtrMode to count BAD frames */
++ globalControl = ((globalControl & ~MV_CTRMODE_MASK) |
++ MV_CTRMODE_BADFRAMES);
++
++ /* Push new value out to hardware */
++ phyRegWrite(phyBase, MV_SWITCH_GLOBAL_ADDR,
++ MV_SWITCH_GLOBAL_CONTROL, globalControl);
++
++ countingGoodFrames = FALSE;
++ }
++}
++
++/*****************************************************************************
++*
++* mv_showFrameCounts - shows current GOOD/BAD Frame counts
++*/
++void
++mv_showFrameCounts(int phyUnit)
++{
++ UINT16 rxCounter;
++ UINT16 txCounter;
++ UINT32 phyBase;
++ UINT32 switchPortAddr;
++
++ if (!mv_validPhyId(phyUnit)) {
++ return;
++ }
++
++ phyBase = MV_PHYBASE(phyUnit);
++ switchPortAddr = MV_SWITCH_PORT_ADDR(phyUnit);
++
++ rxCounter = phyRegRead(phyBase, switchPortAddr, MV_RX_COUNTER);
++
++ txCounter = phyRegRead(phyBase, switchPortAddr, MV_TX_COUNTER);
++
++ PRINTF("port%d %s frames: receive: %05d transmit: %05d\n",
++ phyUnit,
++ (countingGoodFrames ? "good" : "error"),
++ rxCounter,
++ txCounter);
++}
++#endif
+diff -urN linux-2.4.32.new/arch/mips/ar531x/mvPhy.h linux-2.4.32.new-eth/arch/mips/ar531x/mvPhy.h
+--- linux-2.4.32.new/arch/mips/ar531x/mvPhy.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.4.32.new-eth/arch/mips/ar531x/mvPhy.h 2005-12-25 11:54:39.775382608 +0000
+@@ -0,0 +1,160 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License. See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright © 2003 Atheros Communications, Inc., All Rights Reserved.
++ */
++
++/*
++ * mvPhy.h - definitions for the ethernet PHY -- Marvell 88E6060
++ * All definitions in this file are operating system independent!
++ */
++
++#ifndef MVPHY_H
++#define MVPHY_H
++
++/*****************/
++/* PHY Registers */
++/*****************/
++#define MV_PHY_CONTROL 0
++#define MV_PHY_STATUS 1
++#define MV_PHY_ID1 2
++#define MV_PHY_ID2 3
++#define MV_AUTONEG_ADVERT 4
++#define MV_LINK_PARTNER_ABILITY 5
++#define MV_AUTONEG_EXPANSION 6
++#define MV_NEXT_PAGE_TRANSMIT 7
++#define MV_LINK_PARTNER_NEXT_PAGE 8
++#define MV_PHY_SPECIFIC_CONTROL_1 16
++#define MV_PHY_SPECIFIC_STATUS 17
++#define MV_PHY_INTERRUPT_ENABLE 18
++#define MV_PHY_INTERRUPT_STATUS 19
++#define MV_PHY_INTERRUPT_PORT_SUMMARY 20
++#define MV_RECEIVE_ERROR_COUNTER 21
++#define MV_LED_PARALLEL_SELECT 22
++#define MV_LED_STREAM_SELECT_LEDS 23
++#define MV_PHY_LED_CONTROL 24
++#define MV_PHY_MANUAL_LED_OVERRIDE 25
++#define MV_VCT_CONTROL 26
++#define MV_VCT_STATUS 27
++#define MV_PHY_SPECIFIC_CONTROL_2 28
++
++/* MV_PHY_CONTROL fields */
++#define MV_CTRL_SOFTWARE_RESET 0x8000
++#define MV_CTRL_AUTONEGOTIATION_ENABLE 0x1000
++
++/* MV_PHY_ID1 fields */
++#define MV_PHY_ID1_EXPECTATION 0x0141 /* OUI >> 6 */
++
++/* MV_PHY_ID2 fields */
++#define MV_OUI_LSB_MASK 0xfc00
++#define MV_OUI_LSB_EXPECTATION 0x0c00
++#define MV_OUI_LSB_SHIFT 10
++#define MV_MODEL_NUM_MASK 0x03f0
++#define MV_MODEL_NUM_SHIFT 4
++#define MV_REV_NUM_MASK 0x000f
++#define MV_REV_NUM_SHIFT 0
++
++/* MV_PHY_SPECIFIC_STATUS fields */
++#define MV_STATUS_RESOLVED_SPEED_100 0x4000
++#define MV_STATUS_RESOLVED_DUPLEX_FULL 0x2000
++#define MV_STATUS_RESOLVED 0x0800
++#define MV_STATUS_REAL_TIME_LINK_UP 0x0400
++
++/* Check if autonegotiation is complete and link is up */
++#define MV_AUTONEG_DONE(mv_phy_specific_status) \
++ (((mv_phy_specific_status) & \
++ (MV_STATUS_RESOLVED | MV_STATUS_REAL_TIME_LINK_UP)) == \
++ (MV_STATUS_RESOLVED | MV_STATUS_REAL_TIME_LINK_UP))
++
++
++/*************************/
++/* Switch Port Registers */
++/*************************/
++#define MV_PORT_STATUS 0
++#define MV_SWITCH_ID 3
++#define MV_PORT_CONTROL 4
++#define MV_PORT_BASED_VLAN_MAP 6
++#define MV_PORT_ASSOCIATION_VECTOR 11
++#define MV_RX_COUNTER 16
++#define MV_TX_COUNTER 17
++
++/* MV_SWITCH_ID fields */
++#define MV_SWITCH_ID_DEV_MASK 0xfff0
++#define MV_SWITCH_ID_DEV_EXPECTATION 0x0600
++#define MV_SWITCH_ID_DEV_SHIFT 4
++#define MV_SWITCH_ID_REV_MASK 0x000f
++#define MV_SWITCH_ID_REV_SHIFT 0
++
++/* MV_PORT_CONTROL fields */
++#define MV_PORT_CONTROL_PORT_STATE_MASK 0x0003
++#define MV_PORT_CONTROL_PORT_STATE_DISABLED 0x0000
++#define MV_PORT_CONTROL_PORT_STATE_FORWARDING 0x0003
++
++#define MV_PORT_CONTROL_EGRESS_MODE 0x0100 /* Receive */
++#define MV_PORT_CONTROL_INGRESS_TRAILER 0x4000 /* Transmit */
++
++#define MV_EGRESS_TRAILER_VALID 0x80
++#define MV_INGRESS_TRAILER_OVERRIDE 0x80
++
++#define MV_PHY_TRAILER_SIZE 4
++
++
++/***************************/
++/* Switch Global Registers */
++/***************************/
++#define MV_SWITCH_GLOBAL_STATUS 0
++#define MV_SWITCH_MAC_ADDR0 1
++#define MV_SWITCH_MAC_ADDR2 2
++#define MV_SWITCH_MAC_ADDR4 3
++#define MV_SWITCH_GLOBAL_CONTROL 4
++#define MV_ATU_CONTROL 10
++#define MV_ATU_OPERATION 11
++#define MV_ATU_DATA 12
++#define MV_ATU_MAC_ADDR0 13
++#define MV_ATU_MAC_ADDR2 14
++#define MV_ATU_MAC_ADDR4 15
++
++/* MV_SWITCH_GLOBAL_STATUS fields */
++#define MV_SWITCH_STATUS_READY_MASK 0x0800
++
++/* MV_SWITCH_GLOBAL_CONTROL fields */
++#define MV_CTRMODE_MASK 0x0100
++#define MV_CTRMODE_GOODFRAMES 0x0000
++#define MV_CTRMODE_BADFRAMES 0x0100
++
++/* MV_ATU_CONTROL fields */
++#define MV_ATUCTRL_ATU_LEARNDIS 0x4000
++#define MV_ATUCTRL_ATU_SIZE_MASK 0x3000
++#define MV_ATUCTRL_ATU_SIZE_SHIFT 12
++#define MV_ATUCTRL_ATU_SIZE_DEFAULT 2 /* 1024 entry database */
++#define MV_ATUCTRL_AGE_TIME_MASK 0x0ff0
++#define MV_ATUCTRL_AGE_TIME_SHIFT 4
++#define MV_ATUCTRL_AGE_TIME_DEFAULT 19 /* 19 * 16 = 304 seconds */
++
++/* MV_ATU_OPERATION fields */
++#define MV_ATU_BUSY_MASK 0x8000
++#define MV_ATU_IS_BUSY 0x8000
++#define MV_ATU_IS_FREE 0x0000
++#define MV_ATU_OP_MASK 0x7000
++#define MV_ATU_OP_FLUSH_ALL 0x1000
++#define MV_ATU_OP_GET_NEXT 0x4000
++
++/* MV_ATU_DATA fields */
++#define MV_ENTRYPRI_MASK 0xc000
++#define MV_ENTRYPRI_SHIFT 14
++#define MV_PORTVEC_MASK 0x03f0
++#define MV_PORTVEC_SHIFT 4
++#define MV_ENTRYSTATE_MASK 0x000f
++#define MV_ENTRYSTATE_SHIFT 0
++
++/* PHY Address for the switch itself */
++#define MV_SWITCH_GLOBAL_ADDR 0x1f
++
++BOOL mv_phySetup(int ethUnit, UINT32 phyBase);
++void mv_phyCheckStatusChange(int ethUnit);
++BOOL mv_phyIsSpeed100(int ethUnit);
++BOOL mv_phyIsFullDuplex(int ethUnit);
++
++#endif /* MVPHY_H */
+diff -urN linux-2.4.32.new/arch/mips/ar531x/rtPhy.c linux-2.4.32.new-eth/arch/mips/ar531x/rtPhy.c
+--- linux-2.4.32.new/arch/mips/ar531x/rtPhy.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.4.32.new-eth/arch/mips/ar531x/rtPhy.c 2005-12-25 11:54:46.086423184 +0000
+@@ -0,0 +1,272 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License. See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright © 2003 Atheros Communications, Inc., All Rights Reserved.
++ */
++
++/*
++ * Manage the ethernet PHY.
++ * This code supports a simple 1-port ethernet phy, Realtek RTL8201BL,
++ * and compatible PHYs, such as the Kendin KS8721B.
++ * All definitions in this file are operating system independent!
++ */
++
++#if defined(linux)
++#include <linux/config.h>
++#include <linux/types.h>
++#include <linux/netdevice.h>
++#include <linux/etherdevice.h>
++#include <linux/delay.h>
++
++#include "ar531xlnx.h"
++#endif
++
++#if defined(__ECOS)
++#include "ae531xecos.h"
++#endif
++
++
++#include "ae531xmac.h"
++#include "ae531xreg.h"
++#include "rtPhy.h"
++
++#if /* DEBUG */ 1
++#define RT_DEBUG_ERROR 0x00000001
++#define RT_DEBUG_PHYSETUP 0x00000002
++#define RT_DEBUG_PHYCHANGE 0x00000004
++
++int rtPhyDebug = RT_DEBUG_ERROR;
++
++#define RT_PRINT(FLG, X) \
++{ \
++ if (rtPhyDebug & (FLG)) { \
++ DEBUG_PRINTF X; \
++ } \
++}
++#else
++#define RT_PRINT(FLG, X)
++#endif
++
++/*
++ * Track per-PHY port information.
++ */
++typedef struct {
++ BOOL phyAlive; /* last known state of link */
++ UINT32 phyBase;
++ UINT32 phyAddr;
++} rtPhyInfo_t;
++
++#define ETH_PHY_ADDR 1
++
++/*
++ * This table defines the mapping from phy units to
++ * per-PHY information.
++ *
++ * This table is somewhat board-dependent.
++ */
++rtPhyInfo_t rtPhyInfo[] = {
++ {phyAlive: FALSE, /* PHY 0 */
++ phyBase: 0, /* filled in by rt_phySetup */
++ phyAddr: ETH_PHY_ADDR},
++
++ {phyAlive: FALSE, /* PHY 1 */
++ phyBase: 0, /* filled in by rt_phySetup */
++ phyAddr: ETH_PHY_ADDR}
++};
++
++/* Convert from phy unit# to (phyBase, phyAddr) pair */
++#define RT_PHYBASE(phyUnit) (rtPhyInfo[phyUnit].phyBase)
++#define RT_PHYADDR(phyUnit) (rtPhyInfo[phyUnit].phyAddr)
++
++
++/******************************************************************************
++*
++* rt_phySetup - reset and setup the PHY associated with
++* the specified MAC unit number.
++*
++* Resets the associated PHY port.
++*
++* RETURNS:
++* TRUE --> associated PHY is alive
++* FALSE --> no LINKs on this ethernet unit
++*/
++
++BOOL
++rt_phySetup(int ethUnit, UINT32 phyBase)
++{
++ BOOL linkAlive = FALSE;
++ UINT32 phyAddr;
++
++ RT_PHYBASE(ethUnit) = phyBase;
++
++ phyAddr = RT_PHYADDR(ethUnit);
++
++ /* Reset phy */
++ phyRegWrite(phyBase, phyAddr, GEN_ctl, PHY_SW_RST | AUTONEGENA);
++
++ sysMsDelay(1500);
++
++ return linkAlive;
++}
++
++/******************************************************************************
++*
++* rt_phyIsDuplexFull - Determines whether the phy ports associated with the
++* specified device are FULL or HALF duplex.
++*
++* RETURNS:
++* TRUE --> FULL
++* FALSE --> HALF
++*/
++BOOL
++rt_phyIsFullDuplex(int ethUnit)
++{
++ UINT16 phyCtl;
++ UINT32 phyBase;
++ UINT32 phyAddr;
++
++ phyBase = RT_PHYBASE(ethUnit);
++ phyAddr = RT_PHYADDR(ethUnit);
++
++ phyCtl = phyRegRead(phyBase, phyAddr, GEN_ctl);
++
++ if (phyCtl & DUPLEX) {
++ return TRUE;
++ } else {
++ return FALSE;
++ }
++}
++
++/******************************************************************************
++*
++* rt_phyIsSpeed100 - Determines the speed of phy ports associated with the
++* specified device.
++*
++* RETURNS:
++* TRUE --> 100Mbit
++* FALSE --> 10Mbit
++*/
++BOOL
++rt_phyIsSpeed100(int phyUnit)
++{
++ UINT16 phyLpa;
++ UINT32 phyBase;
++ UINT32 phyAddr;
++
++ phyBase = RT_PHYBASE(phyUnit);
++ phyAddr = RT_PHYADDR(phyUnit);
++
++ phyLpa = phyRegRead(phyBase, phyAddr, AN_lpa);
++
++ if (phyLpa & (LPA_TXFD | LPA_TX)) {
++ return TRUE;
++ } else {
++ return FALSE;
++ }
++}
++
++/*****************************************************************************
++*
++* rt_phyCheckStatusChange -- checks for significant changes in PHY state.
++*
++* A "significant change" is:
++* dropped link (e.g. ethernet cable unplugged) OR
++* autonegotiation completed + link (e.g. ethernet cable plugged in)
++*
++* On AR5311, there is a 1-to-1 mapping of ethernet units to PHYs.
++* When a PHY is plugged in, phyLinkGained is called.
++* When a PHY is unplugged, phyLinkLost is called.
++*/
++void
++rt_phyCheckStatusChange(int ethUnit)
++{
++ UINT16 phyHwStatus;
++ rtPhyInfo_t *lastStatus = &rtPhyInfo[ethUnit];
++ UINT32 phyBase;
++ UINT32 phyAddr;
++
++ phyBase = RT_PHYBASE(ethUnit);
++ phyAddr = RT_PHYADDR(ethUnit);
++
++ phyHwStatus = phyRegRead(phyBase, phyAddr, GEN_sts);
++
++ if (lastStatus->phyAlive) { /* last known status was ALIVE */
++ /* See if we've lost link */
++ if (!(phyHwStatus & LINK)) {
++ RT_PRINT(RT_DEBUG_PHYCHANGE,("\nethmac%d link down\n", ethUnit));
++ lastStatus->phyAlive = FALSE;
++ phyLinkLost(ethUnit);
++ }
++ } else { /* last known status was DEAD */
++ /* Check for AN complete */
++ if ((phyHwStatus & (AUTOCMPLT | LINK)) == (AUTOCMPLT | LINK)) {
++ RT_PRINT(RT_DEBUG_PHYCHANGE,("\nethmac%d link up\n", ethUnit));
++ lastStatus->phyAlive = TRUE;
++ phyLinkGained(ethUnit);
++ }
++ }
++}
++
++#if DEBUG
++
++/* Define the PHY registers of interest for a phyShow command */
++struct rtRegisterTable_s {
++ UINT32 regNum;
++ char *regIdString;
++} rtRegisterTable[] =
++{
++ {GEN_ctl, "Basic Mode Control (GEN_ctl) "},
++ {GEN_sts, "Basic Mode Status (GEN_sts) "},
++ {GEN_id_hi, "PHY Identifier 1 (GET_id_hi) "},
++ {GEN_id_lo, "PHY Identifier 2 (GET_id_lo) "},
++ {AN_adv, "Auto-Neg Advertisement (AN_adv) "},
++ {AN_lpa, "Auto-Neg Link Partner Ability "},
++ {AN_exp, "Auto-Neg Expansion "},
++};
++
++int rtNumRegs = sizeof(rtRegisterTable) / sizeof(rtRegisterTable[0]);
++
++/*
++ * Dump the state of a PHY.
++ */
++void
++rt_phyShow(int phyUnit)
++{
++ int i;
++ UINT16 value;
++ UINT32 phyBase;
++ UINT32 phyAddr;
++
++ phyBase = RT_PHYBASE(phyUnit);
++ phyAddr = RT_PHYADDR(phyUnit);
++
++ printf("PHY state for ethphy%d\n", phyUnit);
++
++ for (i=0; i<rtNumRegs; i++) {
++
++ value = phyRegRead(phyBase, phyAddr, rtRegisterTable[i].regNum);
++
++ printf("Reg %02d (0x%02x) %s = 0x%08x\n",
++ rtRegisterTable[i].regNum, rtRegisterTable[i].regNum,
++ rtRegisterTable[i].regIdString, value);
++ }
++}
++
++/*
++ * Modify the value of a PHY register.
++ * This makes it a bit easier to modify PHY values during debug.
++ */
++void
++rt_phySet(int phyUnit, UINT32 regnum, UINT32 value)
++{
++ UINT32 phyBase;
++ UINT32 phyAddr;
++
++ phyBase = RT_PHYBASE(phyUnit);
++ phyAddr = RT_PHYADDR(phyUnit);
++
++ phyRegWrite(phyBase, phyAddr, regnum, value);
++}
++#endif
+diff -urN linux-2.4.32.new/arch/mips/ar531x/rtPhy.h linux-2.4.32.new-eth/arch/mips/ar531x/rtPhy.h
+--- linux-2.4.32.new/arch/mips/ar531x/rtPhy.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.4.32.new-eth/arch/mips/ar531x/rtPhy.h 2005-12-25 11:54:46.089422728 +0000
+@@ -0,0 +1,50 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License. See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright © 2003 Atheros Communications, Inc., All Rights Reserved.
++ */
++
++/*
++ * rtPhy.h - definitions for the ethernet PHY.
++ * This code supports a simple 1-port ethernet phy, Realtek RTL8201BL,
++ * and compatible PHYs, such as the Kendin KS8721B.
++ * All definitions in this file are operating system independent!
++ */
++
++#ifndef RTPHY_H
++#define RTPHY_H
++
++/* MII Registers */
++
++#define GEN_ctl 00
++#define GEN_sts 01
++#define GEN_id_hi 02
++#define GEN_id_lo 03
++#define AN_adv 04
++#define AN_lpa 05
++#define AN_exp 06
++
++/* GEN_ctl */
++#define PHY_SW_RST 0x8000
++#define LOOPBACK 0x4000
++#define SPEED 0x2000 /* 100 Mbit/s */
++#define AUTONEGENA 0x1000
++#define DUPLEX 0x0100 /* Duplex mode */
++
++
++/* GEN_sts */
++#define AUTOCMPLT 0x0020 /* Autonegotiation completed */
++#define LINK 0x0004 /* Link status */
++
++/* GEN_ids */
++#define RT_PHY_ID1_EXPECTATION 0x22
++
++/* AN_lpa */
++#define LPA_TXFD 0x0100 /* Link partner supports 100 TX Full Duplex */
++#define LPA_TX 0x0080 /* Link partner supports 100 TX Half Duplex */
++#define LPA_10FD 0x0040 /* Link partner supports 10 BT Full Duplex */
++#define LPA_10 0x0020 /* Link partner supports 10 BT Half Duplex */
++
++#endif /* RTPHY_H */
diff --git a/openwrt/target/linux/package/diag/Config.in b/openwrt/target/linux/package/diag/Config.in
index a33f81267..001da0a00 100644
--- a/openwrt/target/linux/package/diag/Config.in
+++ b/openwrt/target/linux/package/diag/Config.in
@@ -1,6 +1,8 @@
config BR2_PACKAGE_KMOD_DIAG
prompt "kmod-diag......................... Driver for router LEDs and Buttons"
tristate
- default y
+ default y if BR2_LINUX_2_4_BRCM
+ default m if CONFIG_DEVEL
+ default n
help
Driver for router LEDs and Buttons
diff --git a/openwrt/target/linux/package/madwifi/Config.in b/openwrt/target/linux/package/madwifi/Config.in
index b27bb35e1..70cd2afcf 100644
--- a/openwrt/target/linux/package/madwifi/Config.in
+++ b/openwrt/target/linux/package/madwifi/Config.in
@@ -3,6 +3,7 @@ config BR2_PACKAGE_KMOD_MADWIFI
tristate
default y if BR2_LINUX_2_6_BRCM
default m if CONFIG_DEVEL
+ default n
help
Driver for Atheros 802.11a/b/g MiniPCI cards
diff --git a/openwrt/target/linux/package/switch/Config.in b/openwrt/target/linux/package/switch/Config.in
index 5f7d7dc86..407d5deb6 100644
--- a/openwrt/target/linux/package/switch/Config.in
+++ b/openwrt/target/linux/package/switch/Config.in
@@ -3,6 +3,7 @@ config BR2_PACKAGE_KMOD_SWITCH
tristate
default y if BR2_LINUX_2_6_BRCM || BR2_LINUX_2_4_BRCM
default m if CONFIG_DEVEL
+ default n
help
Kernel driver for ROBO and ADMTEK switches.
diff --git a/openwrt/target/linux/rules.mk b/openwrt/target/linux/rules.mk
index 8871fa442..758b52513 100644
--- a/openwrt/target/linux/rules.mk
+++ b/openwrt/target/linux/rules.mk
@@ -1,5 +1,6 @@
LINUX_KARCH:=$(shell echo $(ARCH) | sed -e 's/i[3-9]86/i386/' \
-e 's/mipsel/mips/' \
+ -e 's/mipseb/mips/' \
-e 's/powerpc/ppc/' \
-e 's/sh[234]/sh/' \
)
diff --git a/openwrt/toolchain/kernel-headers/Makefile b/openwrt/toolchain/kernel-headers/Makefile
index b3a7b1ecf..732a097e8 100644
--- a/openwrt/toolchain/kernel-headers/Makefile
+++ b/openwrt/toolchain/kernel-headers/Makefile
@@ -13,6 +13,7 @@ LINUX_HEADERS_SITE= \
LINUX_HEADERS_SOURCE=linux-$(LINUX_HEADERS_VERSION).tar.bz2
LINUX_HEADERS_ARCH:=$(shell echo $(ARCH) | sed -e 's/i[3-9]86/i386/' \
-e 's/mipsel/mips/' \
+ -e 's/mipseb/mips/' \
-e 's/powerpc/ppc/' \
-e 's/sh[234]/sh/' \
)
diff --git a/openwrt/toolchain/uClibc/files/config.mipseb b/openwrt/toolchain/uClibc/files/config.mipseb
new file mode 100644
index 000000000..e5601f533
--- /dev/null
+++ b/openwrt/toolchain/uClibc/files/config.mipseb
@@ -0,0 +1,163 @@
+#
+# Automatically generated make config: don't edit
+#
+# TARGET_alpha is not set
+# TARGET_arm is not set
+# TARGET_bfin is not set
+# TARGET_cris is not set
+# TARGET_e1 is not set
+# TARGET_frv is not set
+# TARGET_h8300 is not set
+# TARGET_i386 is not set
+# TARGET_i960 is not set
+# TARGET_m68k is not set
+# TARGET_microblaze is not set
+TARGET_mips=y
+# TARGET_nios is not set
+# TARGET_nios2 is not set
+# TARGET_powerpc is not set
+# TARGET_sh is not set
+# TARGET_sh64 is not set
+# TARGET_sparc is not set
+# TARGET_v850 is not set
+# TARGET_x86_64 is not set
+
+#
+# Target Architecture Features and Options
+#
+HAVE_ELF=y
+ARCH_SUPPORTS_LITTLE_ENDIAN=y
+TARGET_ARCH="mips"
+ARCH_CFLAGS="-mno-split-addresses"
+ARCH_SUPPORTS_BIG_ENDIAN=y
+# CONFIG_MIPS_ISA_1 is not set
+# CONFIG_MIPS_ISA_2 is not set
+# CONFIG_MIPS_ISA_3 is not set
+# CONFIG_MIPS_ISA_4 is not set
+CONFIG_MIPS_ISA_MIPS32=y
+# CONFIG_MIPS_ISA_MIPS64 is not set
+# ARCH_LITTLE_ENDIAN is not set
+ARCH_BIG_ENDIAN=y
+# ARCH_HAS_NO_MMU is not set
+ARCH_HAS_MMU=y
+UCLIBC_HAS_FLOATS=y
+HAS_FPU=y
+# DO_C99_MATH is not set
+KERNEL_SOURCE="./toolchain_build_mipsbe/linux"
+C_SYMBOL_PREFIX=""
+HAVE_DOT_CONFIG=y
+
+#
+# General Library Settings
+#
+# HAVE_NO_PIC is not set
+DOPIC=y
+# HAVE_NO_SHARED is not set
+HAVE_SHARED=y
+# ARCH_HAS_NO_LDSO is not set
+BUILD_UCLIBC_LDSO=y
+# FORCE_SHAREABLE_TEXT_SEGMENTS is not set
+LDSO_LDD_SUPPORT=y
+LDSO_CACHE_SUPPORT=y
+# LDSO_PRELOAD_FILE_SUPPORT is not set
+LDSO_BASE_FILENAME="ld.so"
+# LDSO_RUNPATH is not set
+DL_FINI_CRT_COMPAT=y
+UCLIBC_CTOR_DTOR=y
+# HAS_NO_THREADS is not set
+UCLIBC_HAS_THREADS=y
+# PTHREADS_DEBUG_SUPPORT is not set
+UCLIBC_HAS_LFS=y
+# UCLIBC_STATIC_LDCONFIG is not set
+# MALLOC is not set
+# MALLOC_SIMPLE is not set
+MALLOC_STANDARD=y
+MALLOC_GLIBC_COMPAT=y
+UCLIBC_DYNAMIC_ATEXIT=y
+HAS_SHADOW=y
+# UNIX98PTY_ONLY is not set
+ASSUME_DEVPTS=y
+UCLIBC_HAS_TM_EXTENSIONS=y
+UCLIBC_HAS_TZ_CACHING=y
+UCLIBC_HAS_TZ_FILE=y
+UCLIBC_HAS_TZ_FILE_READ_MANY=y
+UCLIBC_TZ_FILE_PATH="/etc/TZ"
+
+#
+# Networking Support
+#
+UCLIBC_HAS_IPV6=y
+UCLIBC_HAS_RPC=y
+UCLIBC_HAS_FULL_RPC=y
+
+#
+# String and Stdio Support
+#
+UCLIBC_HAS_STRING_GENERIC_OPT=y
+UCLIBC_HAS_STRING_ARCH_OPT=y
+UCLIBC_HAS_CTYPE_TABLES=y
+UCLIBC_HAS_CTYPE_SIGNED=y
+# UCLIBC_HAS_CTYPE_UNSAFE is not set
+UCLIBC_HAS_CTYPE_CHECKED=y
+# UCLIBC_HAS_CTYPE_ENFORCED is not set
+UCLIBC_HAS_WCHAR=y
+# UCLIBC_HAS_LOCALE is not set
+UCLIBC_HAS_HEXADECIMAL_FLOATS=y
+UCLIBC_HAS_GLIBC_CUSTOM_PRINTF=y
+UCLIBC_PRINTF_SCANF_POSITIONAL_ARGS=9
+UCLIBC_HAS_SCANF_GLIBC_A_FLAG=y
+# UCLIBC_HAS_STDIO_BUFSIZ_NONE is not set
+# UCLIBC_HAS_STDIO_BUFSIZ_256 is not set
+# UCLIBC_HAS_STDIO_BUFSIZ_512 is not set
+# UCLIBC_HAS_STDIO_BUFSIZ_1024 is not set
+# UCLIBC_HAS_STDIO_BUFSIZ_2048 is not set
+UCLIBC_HAS_STDIO_BUFSIZ_4096=y
+# UCLIBC_HAS_STDIO_BUFSIZ_8192 is not set
+UCLIBC_HAS_STDIO_BUILTIN_BUFFER_NONE=y
+# UCLIBC_HAS_STDIO_BUILTIN_BUFFER_4 is not set
+# UCLIBC_HAS_STDIO_BUILTIN_BUFFER_8 is not set
+# UCLIBC_HAS_STDIO_SHUTDOWN_ON_ABORT is not set
+UCLIBC_HAS_STDIO_GETC_MACRO=y
+UCLIBC_HAS_STDIO_PUTC_MACRO=y
+UCLIBC_HAS_STDIO_AUTO_RW_TRANSITION=y
+# UCLIBC_HAS_FOPEN_LARGEFILE_MODE is not set
+UCLIBC_HAS_FOPEN_EXCLUSIVE_MODE=y
+UCLIBC_HAS_GLIBC_CUSTOM_STREAMS=y
+UCLIBC_HAS_PRINTF_M_SPEC=y
+UCLIBC_HAS_ERRNO_MESSAGES=y
+# UCLIBC_HAS_SYS_ERRLIST is not set
+UCLIBC_HAS_SIGNUM_MESSAGES=y
+# UCLIBC_HAS_SYS_SIGLIST is not set
+UCLIBC_HAS_GNU_GETOPT=y
+
+#
+# Big and Tall
+#
+UCLIBC_HAS_REGEX=y
+# UCLIBC_HAS_WORDEXP is not set
+UCLIBC_HAS_FTW=y
+UCLIBC_HAS_GLOB=y
+
+#
+# Library Installation Options
+#
+SHARED_LIB_LOADER_PREFIX="/lib"
+RUNTIME_PREFIX="/"
+DEVEL_PREFIX="/usr/"
+
+#
+# uClibc security related options
+#
+# UCLIBC_SECURITY is not set
+
+#
+# uClibc development/debugging options
+#
+CROSS_COMPILER_PREFIX=""
+# DODEBUG is not set
+# DODEBUG_PT is not set
+# DOASSERTS is not set
+# SUPPORT_LD_DEBUG is not set
+# SUPPORT_LD_DEBUG_EARLY is not set
+WARNINGS="-Wall"
+# UCLIBC_MJN3_ONLY is not set
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-10 09:11:55 +0000