add default configs for kismet

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@723 3c298f89-4303-0410-b956-a3cf2f4a3e73

3 files changed, 452 insertions, 0 deletions

diff --git a/openwrt/package/kismet/Makefile b/openwrt/package/kismet/Makefile
index 20b7fed20..23d9eb345 100644
--- a/openwrt/package/kismet/Makefile
+++ b/openwrt/package/kismet/Makefile
@@ -94,6 +94,9 @@ $(PKG_BUILD_DIR)/kismet_server $(PKG_BUILD_DIR)/kismet_drone $(PKG_BUILD_DIR)/ki
 
 $(IPKG_SERVER): $(PKG_BUILD_DIR)/kismet_server
 	$(SCRIPT_DIR)/make-ipkg-dir.sh $(IDIR_SERVER) kismet-server.control $(PKG_VERSION)-$(PKG_RELEASE) $(ARCH)
+	mkdir -p $(IDIR_SERVER)/etc
+	cp ./files/kismet.conf $(IDIR_SERVER)/etc/
+	echo '/etc/kismet.conf' > $(IDIR_SERVER)/CONTROL/conffiles
 	mkdir -p $(IDIR_SERVER)/usr/sbin
 	cp $< $(IDIR_SERVER)/usr/sbin/
 	$(STRIP) $(IDIR_SERVER)/usr/sbin/*
@@ -105,6 +108,9 @@ $(INFO_SERVER): $(IPKG_SERVER)
 
 $(IPKG_DRONE): $(PKG_BUILD_DIR)/kismet_drone
 	$(SCRIPT_DIR)/make-ipkg-dir.sh $(IDIR_DRONE) kismet-drone.control $(PKG_VERSION)-$(PKG_RELEASE) $(ARCH)
+	mkdir -p $(IDIR_DRONE)/etc
+	cp ./files/kismet_drone.conf $(IDIR_DRONE)/etc/
+	echo '/etc/kismet_drone.conf' > $(IDIR_DRONE)/CONTROL/conffiles
 	mkdir -p $(IDIR_DRONE)/usr/sbin
 	cp $< $(IDIR_DRONE)/usr/sbin/
 	$(STRIP) $(IDIR_DRONE)/usr/sbin/*
@@ -116,6 +122,9 @@ $(INFO_DRONE): $(IPKG_DRONE)
 
 $(IPKG_CLIENT): $(PKG_BUILD_DIR)/kismet_client
 	$(SCRIPT_DIR)/make-ipkg-dir.sh $(IDIR_CLIENT) kismet-client.control $(PKG_VERSION)-$(PKG_RELEASE) $(ARCH)
+	mkdir -p $(IDIR_CLIENT)/etc
+	cp ./files/kismet.conf $(IDIR_CLIENT)/etc/
+	echo '/etc/kismet.conf' > $(IDIR_CLIENT)/CONTROL/conffiles
 	mkdir -p $(IDIR_CLIENT)/usr/sbin
 	cp $< $(IDIR_CLIENT)/usr/sbin/
 	$(STRIP) $(IDIR_CLIENT)/usr/sbin/*
diff --git a/openwrt/package/kismet/files/kismet.conf b/openwrt/package/kismet/files/kismet.conf
new file mode 100644
index 000000000..4291989b5
--- /dev/null
+++ b/openwrt/package/kismet/files/kismet.conf
@@ -0,0 +1,323 @@
+# Kismet config file
+# Most of the "static" configs have been moved to here -- the command line
+# config was getting way too crowded and cryptic.  We want functionality,
+# not continually reading --help!
+
+# Version of Kismet config
+version=2004.10.R1
+
+# Name of server (Purely for organiational purposes)
+servername=Kismet
+
+# User to setid to (should be your normal user)
+suiduser=root
+
+# Sources are defined as:
+# source=cardtype,interface,name[,initialchannel]
+# Card types and required drivers are listed in the README.
+# The initial channel is optional, if hopping is not enabled it can be used
+# to set the channel the interface listens on.
+# YOU MUST CHANGE THIS TO BE THE SOURCE YOU WANT TO USE
+source=none,none,addme
+
+# Comma-separated list of sources to enable.  This is only needed if you defined
+# multiple sources and only want to enable some of them.  By default, all defined
+# sources are enabled.
+# For example:
+# enablesources=prismsource,ciscosource
+
+# Do we channelhop?
+channelhop=true
+
+# How many channels per second do we hop?  (1-10)
+channelvelocity=5
+
+# By setting the dwell time for channel hopping we override the channelvelocity
+# setting above and dwell on each channel for the given number of seconds.
+#channeldwell=10
+
+# Do we split channels between cards on the same spectrum?  This means if 
+# multiple 802.11b capture sources are defined, they will be offset to cover
+# the most possible spectrum at a given time.  This also controls splitting
+# fine-tuned sourcechannels lines which cover multiple interfaces (see below)
+channelsplit=true
+
+# Basic channel hopping control:
+# These define the channels the cards hop through for various frequency ranges
+# supported by Kismet.   More finegrain control is available via the 
+# "sourcechannels" configuration option.
+# 
+# Don't change the IEEE80211<x> identifiers or channel hopping won't work.
+
+# Users outside the US might want to use this list:
+# defaultchannels=IEEE80211b:1,7,13,2,8,3,14,9,4,10,5,11,6,12
+defaultchannels=IEEE80211b:1,6,11,2,7,3,8,4,9,5,10
+
+# 802.11g uses the same channels as 802.11b...
+defaultchannels=IEEE80211g:1,6,11,2,7,3,8,4,9,5,10
+
+# 802.11a channels are non-overlapping so sequential is fine.  You may want to
+# adjust the list depending on the channels your card actually supports.
+# defaultchannels=IEEE80211a:36,40,44,48,52,56,60,64,100,104,108,112,116,120,124,128,132,136,140,149,153,157,161,184,188,192,196,200,204,208,212,216 
+defaultchannels=IEEE80211a:36,40,44,48,52,56,60,64
+
+# Combo cards like Atheros use both 'a' and 'b/g' channels.  Of course, you
+# can also explicitly override a given source.  You can use the script 
+# extras/listchan.pl to extract all the channels your card supports.
+defaultchannels=IEEE80211ab:1,6,11,2,7,3,8,4,9,5,10,36,40,44,48,52,56,60,64
+
+# Fine-tuning channel hopping control:
+# The sourcechannels option can be used to set the channel hopping for 
+# specific interfaces, and to control what interfaces share a list of 
+# channels for split hopping.  This can also be used to easily lock
+# one card on a single channel while hopping with other cards.
+# Any card without a sourcechannel definition will use the standard hopping
+# list.
+# sourcechannels=sourcename[,sourcename]:ch1,ch2,ch3,...chN
+
+# ie, for us channels on the source 'prism2source' (same as normal channel
+# hopping behavior):
+# sourcechannels=prism2source:1,6,11,2,7,3,8,4,9,5,10
+
+# Given two capture sources, "prism2a" and "prism2b", we want prism2a to stay
+# on channel 6 and prism2b to hop normally.  By not setting a sourcechannels 
+# line for prism2b, it will use the standard hopping.
+# sourcechannels=prism2a:6
+
+# To assign the same custom hop channel to multiple sources, or to split the 
+# same custom hop channel over two sources (if splitchannels is true), list
+# them all on the same sourcechannels line:
+# sourcechannels=prism2a,prism2b,prism2c:1,6,11
+
+# Port to serve GUI data
+tcpport=2501
+# People allowed to connect, comma seperated IP addresses or network/mask
+# blocks.  Netmasks can be expressed as dotted quad (/255.255.255.0) or as
+# numbers (/24)
+allowedhosts=127.0.0.1
+# Maximum number of concurrent GUI's
+maxclients=5
+
+# Do we have a GPS?
+gps=true
+# Host:port that GPSD is running on.  This can be localhost OR remote!
+gpshost=localhost:2947
+# Do we lock the mode?  This overrides coordinates of lock "0", which will
+# generate some bad information until you get a GPS lock, but it will 
+# fix problems with GPS units with broken NMEA that report lock 0
+gpsmodelock=false
+
+# Packet filtering options:
+# filter_tracker - Packets filtered from the tracker are not processed or
+#                  recorded in any way.
+# filter_dump    - Packets filtered at the dump level are tracked, displayed,
+#                  and written to the csv/xml/network/etc files, but not 
+#                  recorded in the packet dump
+# filter_export  - Controls what packets influence the exported CSV, network,
+#                  xml, gps, etc files.
+# All filtering options take arguments containing the type of address and
+# addresses to be filtered.  Valid address types are 'ANY', 'BSSID',
+# 'SOURCE', and 'DEST'.  Filtering can be inverted by the use of '!' before
+# the address.  For example,
+# filter_tracker=ANY(!00:00:DE:AD:BE:EF)
+# has the same effect as the previous mac_filter config file option.
+# filter_tracker=...
+# filter_dump=...
+# filter_export=...
+
+# Alerts to be reported and the throttling rates.
+# alert=name,throttle/unit,burst
+# The throttle/unit describes the number of alerts of this type that are
+# sent per time unit.  Valid time units are second, minute, hour, and day.
+# Burst describes the number of alerts sent before throttling takes place.
+# For example:
+# alert=FOO,10/min,5
+# Would allow 5 alerts through before throttling is enabled, and will then
+# limit the number of alerts to 10 per minute.
+# A throttle rate of 0 disables throttling of the alert.
+# See the README for a list of alert types.
+alert=NETSTUMBLER,5/min,2
+alert=WELLENREITER,5/min,2
+alert=LUCENTTEST,5/min,2
+alert=DEAUTHFLOOD,5/min,4
+alert=BCASTDISCON,5/min,4
+alert=CHANCHANGE,5/min,4
+alert=AIRJACKSSID,5/min,2
+alert=PROBENOJOIN,5/min,2
+alert=DISASSOCTRAFFIC,5/min,2
+alert=NULLPROBERESP,5/min,5
+alert=BSSTIMESTAMP,5/min,5
+
+# Known WEP keys to decrypt, bssid,hexkey.  This is only for networks where
+# the keys are already known, and it may impact throughput on slower hardware.
+# Multiple wepkey lines may be used for multiple BSSIDs.
+# wepkey=00:DE:AD:C0:DE:00,FEEDFACEDEADBEEF01020304050607080900
+
+# Is transmission of the keys to the client allowed?  This may be a security
+# risk for some.  If you disable this, you will not be able to query keys from
+# a client.
+allowkeytransmit=true
+
+# How often (in seconds) do we write all our data files (0 to disable)
+writeinterval=300
+
+# Do we use sound?
+# Not to be confused with GUI sound parameter, this controls wether or not the
+# server itself will play sound.  Primarily for headless or automated systems.
+sound=false
+# Path to sound player
+soundplay=/usr/bin/play
+# Optional parameters to pass to the player
+# soundopts=--volume=.3
+# New network found
+sound_new=/tmp/share/kismet/wav/new_network.wav
+# Wepped new network
+# sound_new_wep=${prefix}/com/kismet/wav/new_wep_network.wav
+# Network traffic sound
+sound_traffic=/tmp/share/kismet/wav/traffic.wav
+# Network junk traffic found
+sound_junktraffic=/tmp/share/kismet/wav/junk_traffic.wav
+# GPS lock aquired sound
+# sound_gpslock=/tmp/share/kismet/wav/foo.wav
+# GPS lock lost sound
+# sound_gpslost=/tmp/share/kismet/wav/bar.wav
+# Alert sound
+sound_alert=/tmp/share/kismet/wav/alert.wav
+
+# Does the server have speech? (Again, not to be confused with the GUI's speech)
+speech=false
+# Server's path to Festival
+festival=/usr/bin/festival
+# How do we speak?  Valid options:
+# speech    Normal speech
+# nato      NATO spellings (alpha, bravo, charlie)
+# spell     Spell the letters out (aye, bee, sea)
+speech_type=nato
+# speech_encrypted and speech_unencrypted - Speech templates
+# Similar to the logtemplate option, this lets you customize the speech output.
+# speech_encrypted is used for an encrypted network spoken string
+# speech_unencrypted is used for an unencrypted network spoken string
+#
+# %b is replaced by the BSSID (MAC) of the network
+# %s is replaced by the SSID (name) of the network
+# %c is replaced by the CHANNEL of the network
+# %r is replaced by the MAX RATE of the network
+speech_encrypted=New network detected, s.s.i.d. %s, channel %c, network encrypted.
+speech_unencrypted=New network detected, s.s.i.d. %s, channel %c, network open.
+
+# Where do we get our manufacturer fingerprints from?  Assumed to be in the
+# default config directory if an absolute path is not given.
+ap_manuf=ap_manuf
+client_manuf=client_manuf
+
+# Use metric measurements in the output?
+metric=false
+
+# Do we write waypoints for gpsdrive to load?  Note:  This is NOT related to
+# recent versions of GPSDrive's native support of Kismet.
+waypoints=false
+# GPSMap waypoint file.  This WILL be truncated.
+waypointdata=%h/.gpsdrive/way_kismet.txt
+
+# How many alerts do we backlog for new clients?  Only change this if you have
+# a -very- low memory system and need those extra bytes, or if you have a high
+# memory system and a huge number of alert conditions.
+alertbacklog=50
+
+# File types to log, comma seperated
+# dump    - raw packet dump
+# network - plaintext detected networks
+# csv     - plaintext detected networks in CSV format
+# xml     - XML formatted network and cisco log
+# weak    - weak packets (in airsnort format)
+# cisco   - cisco equipment CDP broadcasts
+# gps     - gps coordinates
+logtypes=dump,network,csv,xml,weak,cisco,gps
+
+# Do we track probe responses and merge probe networks into their owners?
+# This isn't always desireable, depending on the type of monitoring you're
+# trying to do.
+trackprobenets=true
+
+# Do we log "noise" packets that we can't decipher?  I tend to not, since 
+# they don't have anything interesting at all in them.
+noiselog=false
+
+# Do we log corrupt packets?  Corrupt packets have enough header information
+# to see what they are, but someting is wrong with them that prevents us from
+# completely dissecting them.  Logging these is usually not a bad idea.
+corruptlog=true
+
+# Do we log beacon packets or do we filter them out of the dumpfile
+beaconlog=true
+
+# Do we log PHY layer packets or do we filter them out of the dumpfile
+phylog=true
+
+# Do we mangle packets if we can decrypt them or if they're fuzzy-detected
+mangledatalog=true
+
+# Do we do "fuzzy" crypt detection?  (byte-based detection instead of 802.11
+# frame headers)
+# valid option: Comma seperated list of card types to perform fuzzy detection 
+#  on, or 'all'
+fuzzycrypt=wtapfile,wlanng,wlanng_legacy,wlanng_avs,hostap,wlanng_wext
+
+# What type of dump do we generate? 
+# valid option: "wiretap" 
+dumptype=wiretap
+# Do we limit the size of dump logs?  Sometimes ethereal can't handle big ones.
+# 0 = No limit
+# Anything else = Max number of packets to log to a single file before closing
+# and opening a new one.
+dumplimit=0
+
+# Do we write data packets to a FIFO for an external data-IDS (such as Snort)?
+# See the docs before enabling this.
+#fifo=/tmp/kismet_dump
+
+# Default log title
+logdefault=Kismet
+
+# logtemplate - Filename logging template.
+# This is, at first glance, really nasty and ugly, but you'll hardly ever
+# have to touch it so don't complain too much.
+#
+# %n is replaced by the logging instance name
+# %d is replaced by the current date as Mon-DD-YYYY
+# %D is replaced by the current date as YYYYMMDD
+# %t is replaced by the starting log time
+# %i is replaced by the increment log in the case of multiple logs
+# %l is replaced by the log type (dump, status, crypt, etc)
+# %h is replaced by the home directory
+# ie, "netlogs/%n-%d-%i.dump" called with a logging name of "Pok" could expand
+# to something like "netlogs/Pok-Dec-20-01-1.dump" for the first instance and 
+# "netlogs/Pok-Dec-20-01-2.%l" for the second logfile generated.
+# %h/netlots/%n-%d-%i.dump could expand to
+# /home/foo/netlogs/Pok-Dec-20-01-2.dump
+#
+# Other possibilities:  Sorting by directory
+# logtemplate=%l/%n-%d-%i
+# Would expand to, for example,
+# dump/Pok-Dec-20-01-1
+# crypt/Pok-Dec-20-01-1
+# and so on.  The "dump", "crypt", etc, dirs must exist before kismet is run
+# in this case.
+logtemplate=%n-%d-%i.%l
+
+# Where do we store the pid file of the server?
+piddir=/var/run/
+
+# Where state info, etc, is stored.  You shouldnt ever need to change this.
+# This is a directory.
+configdir=%h/.kismet/
+
+# cloaked SSID file.  You shouldn't ever need to change this.
+ssidmap=ssid_map
+
+# Group map file.  You shouldn't ever need to change this.
+groupmap=group_map
+
+# IP range map file.  You shouldn't ever need to change this.
+ipmap=ip_map
+
diff --git a/openwrt/package/kismet/files/kismet_drone.conf b/openwrt/package/kismet/files/kismet_drone.conf
new file mode 100644
index 000000000..865278ab7
--- /dev/null
+++ b/openwrt/package/kismet/files/kismet_drone.conf
@@ -0,0 +1,120 @@
+# Kismet drone config file
+
+version=Feb.04.01a
+
+# Name of server (Purely for organiational purposes)
+servername=Kismet
+
+# User to setid to (should be your normal user)
+suiduser=your_user_here
+
+# Port to serve packet data... This probably shouldn't be the same as the port
+# you configured kismet_server for, or else you'll have problems running them 
+# on the same system.
+tcpport=3501
+# People allowed to connect, comma seperated IP addresses or network/mask
+# blocks.  Netmasks can be expressed as dotted quad (/255.255.255.0) or as
+# numbers (/24)
+allowedhosts=127.0.0.1
+# Maximum number of concurrent stream attachments
+maxclients=5
+
+# Packet sources:
+# source=capture_cardtype,capture_interface,capture_name
+# Card type - Specifies the type of device. It can be one of:
+#     cisco         - Cisco card with Linux Kernel drivers 
+#     cisco_cvs     - Cisco card with CVS Linux drivers
+#     cisco_bsd     - Cisco on *BSD
+#     prism2        - Prism2 using wlan-ng drivers with pcap support (all 
+#                      current versions support pcap)
+#     prism2_hostap - Prism2 using hostap drivers
+#     prism2_legacy - Prism2 using wlan-ng drivers without pcap support (0.1.9)
+#     prism2_bsd    - Prism2 on *BSD
+#     orinoco       - Orinoco cards using Snax's patched driers
+#     generic       - Generic card with no specific support.  You will have 
+#                      to put this into monitor mode yourself!
+#     wsp100        - WSP100 embedded remote sensor.  
+#     wtapfile      - Saved file of packets readable by libwiretap
+#     ar5k          - ar5k 802.11a using the vt_ar5k drivers
+# Capture interface - Specifies the network interface Kismet will watch for
+#  packets to come in on.  Typically "ethX" or "wlanX".  For the WSP100 capture
+#  engine, the WSP100 device sends packets via a UDP stream, so the capture
+#  interface should be in the form of host:port where 'host' is the WSP100 and 
+#  'port' is the local UDP port that it will send data to.
+# Capture Name      - The name Kismet uses for this capture source.  This is the 
+#   name used to specify what sources to enable.
+# 
+# To enable multiple sources, specify a source line for each and then use the
+# enablesources line to enable them.  For example:
+# source=prism2,wlan0,prism
+# source=cisco,eth0,cisco
+
+source=generic,prism0,Kismet-Drone
+
+# Comma-separated list of sources to enable.  This is only needed if you wish 
+# to selectively enable multiple sources.
+# enablesources=prism,cisco
+
+# Do we channelhop?
+channelhop=true
+
+# How many channels per second do we hop?  (1-10)
+channelvelocity=5
+
+# By setting the dwell time for channel hopping we override the channelvelocity
+# setting above and dwell on each channel for the given number of seconds.
+#channeldwell=10
+
+# Do we split channels between cards on the same spectrum?  This means if 
+# multiple 802.11b capture sources are defined, they will be offset to cover
+# the most possible spectrum at a given time.  This also controls splitting
+# fine-tuned sourcechannels lines which cover multiple interfaces (see below)
+splitchannels=true
+
+# Basic channel hopping control:
+# These define the channels the cards hop through for various frequency ranges
+# supported by Kismet.   More finegrain control is available via the 
+# "sourcechannels" configuration option.
+# 
+# Don't change the IEEE80211<x> identifiers or channel hopping won't work.
+
+# Users outside the US might want to use this list:
+# defaultchannels=IEEE80211b:1,7,13,2,8,3,14,9,4,10,5,11,6,12
+defaultchannels=IEEE80211b:1,6,11,2,7,3,8,4,9,5,10
+
+# 802.11g uses the same channels as 802.11b...
+defaultchannels=IEEE80211g:1,6,11,2,7,3,8,4,9,5,10
+
+# 802.11a channels are non-overlapping so sequential is fine.  You may want to
+# adjust the list depending on the channels your card actually supports.
+# defaultchannels=IEEE80211a:36,40,44,48,52,56,60,64,100,104,108,112,116,120,124,128,132,136,140,149,153,157,161,184,188,192,196,200,204,208,212,216 
+defaultchannels=IEEE80211a:36,40,44,48,52,56,60,64
+
+# Combo cards like Atheros use both 'a' and 'b/g' channels.  Of course, you
+# can also explicitly override a given source.  You can use the script 
+# extras/listchan.pl to extract all the channels your card supports.
+defaultchannels=IEEE80211ab:1,6,11,2,7,3,8,4,9,5,10,36,40,44,48,52,56,60,64
+
+# Fine-tuning channel hopping control:
+# The sourcechannels option can be used to set the channel hopping for 
+# specific interfaces, and to control what interfaces share a list of 
+# channels for split hopping.  This can also be used to easily lock
+# one card on a single channel while hopping with other cards.
+# Any card without a sourcechannel definition will use the standard hopping
+# list.
+# sourcechannels=sourcename[,sourcename]:ch1,ch2,ch3,...chN
+
+# ie, for us channels on the source 'prism2source' (same as normal channel
+# hopping behavior):
+# sourcechannels=prism2source:1,6,11,2,7,3,8,4,9,5,10
+
+# Given two capture sources, "prism2a" and "prism2b", we want prism2a to stay
+# on channel 6 and prism2b to hop normally.  By not setting a sourcechannels 
+# line for prism2b, it will use the standard hopping.
+# sourcechannels=prism2a:6
+
+# To assign the same custom hop channel to multiple sources, or to split the 
+# same custom hop channel over two sources (if splitchannels is true), list
+# them all on the same sourcechannels line:
+# sourcechannels=prism2a,prism2b,prism2c:1,6,11
+