[rb532] update 2.6.27 patches with upstream fixes from git repository and mailing-lists. via-rhine is still broken, thus not switching to 2.6.27 as default.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14173 3c298f89-4303-0410-b956-a3cf2f4a3e73

20 files changed, 794 insertions, 250 deletions

diff --git a/target/linux/rb532/config-2.6.27 b/target/linux/rb532/config-2.6.27
index 34f8731a1..5d5aa6779 100644
--- a/target/linux/rb532/config-2.6.27
+++ b/target/linux/rb532/config-2.6.27
@@ -8,6 +8,7 @@ CONFIG_ARCH_REQUIRE_GPIOLIB=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_ARCH_SUPPORTS_OPROFILE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 # CONFIG_ATA_PIIX is not set
 CONFIG_ATA_SFF=y
@@ -67,7 +68,6 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GPIOLIB=y
-# CONFIG_GPIO_BT8XX is not set
 CONFIG_GPIO_SYSFS=y
 CONFIG_HAS_DMA=y
 CONFIG_HAS_IOMEM=y
@@ -108,7 +108,6 @@ CONFIG_KORINA=y
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_TMIO is not set
 CONFIG_MIKROTIK_RB532=y
-CONFIG_MINI_FO=y
 CONFIG_MIPS=y
 # CONFIG_MIPS_COBALT is not set
 CONFIG_MIPS_L1_CACHE_SHIFT=4
@@ -140,8 +139,6 @@ CONFIG_MTD_CHAR=y
 # CONFIG_MTD_CMDLINE_PARTS is not set
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
 # CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_DEBUG=y
-CONFIG_MTD_DEBUG_VERBOSE=3
 CONFIG_MTD_GEN_PROBE=y
 # CONFIG_MTD_JEDECPROBE is not set
 CONFIG_MTD_MAP_BANK_WIDTH_1=y
@@ -177,12 +174,15 @@ CONFIG_MTD_PHYSMAP_START=0x8000000
 # CONFIG_NATSEMI is not set
 # CONFIG_NET_SCH_ESFQ_NFCT is not set
 CONFIG_NF_CONNTRACK=y
+CONFIG_NF_CT_ACCT=y
 # CONFIG_NO_IOPORT is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 # CONFIG_PAGE_SIZE_16KB is not set
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_64KB is not set
 # CONFIG_PAGE_SIZE_8KB is not set
+CONFIG_PATA_PLATFORM=y
+CONFIG_PATA_RB532=y
 # CONFIG_PATA_SCH is not set
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
@@ -192,12 +192,15 @@ CONFIG_PCSPKR_PLATFORM=y
 # CONFIG_PNX8550_JBS is not set
 # CONFIG_PNX8550_STB810 is not set
 # CONFIG_PROBE_INITRD_HEADER is not set
+# CONFIG_PROM_EMU is not set
 # CONFIG_R6040 is not set
 CONFIG_RC32434_WDT=y
 CONFIG_RFKILL_LEDS=y
 CONFIG_RTC_LIB=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCSI=y
+CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SERIAL_8250_EXTENDED is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
@@ -227,8 +230,18 @@ CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
 CONFIG_TRAD_SIGNALS=y
 # CONFIG_VGASTATE is not set
 CONFIG_VIA_RHINE=y
-# CONFIG_VIA_RHINE_MMIO is not set
+CONFIG_VIA_RHINE_MMIO=y
 CONFIG_VIDEO_MEDIA=m
 CONFIG_VIDEO_V4L2=m
 CONFIG_VIDEO_V4L2_COMMON=m
+CONFIG_YAFFS_9BYTE_TAGS=y
+# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
+CONFIG_YAFFS_AUTO_YAFFS2=y
+CONFIG_YAFFS_CHECKPOINT_RESERVED_BLOCKS=0
+# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
+# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
+CONFIG_YAFFS_FS=y
+CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
+CONFIG_YAFFS_YAFFS1=y
+CONFIG_YAFFS_YAFFS2=y
 CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/rb532/patches-2.6.27/008-korina_fixes.patch b/target/linux/rb532/patches-2.6.27/008-korina_fixes.patch
deleted file mode 100644
index 69483010b..000000000
--- a/target/linux/rb532/patches-2.6.27/008-korina_fixes.patch
+++ /dev/null
@@ -1,245 +0,0 @@
---- linux-2.6.27.5/drivers/net/korina.c	2008-11-07 18:55:34.000000000 +0100
-+++ ../build_dir/linux-rb532/linux-2.6.27.5/drivers/net/korina.c	2008-11-16 00:38:19.000000000 +0100
-@@ -327,12 +327,11 @@
- 
- 	dmas = readl(&lp->rx_dma_regs->dmas);
- 	if (dmas & (DMA_STAT_DONE | DMA_STAT_HALT | DMA_STAT_ERR)) {
--		netif_rx_schedule_prep(dev, &lp->napi);
--
- 		dmasm = readl(&lp->rx_dma_regs->dmasm);
- 		writel(dmasm | (DMA_STAT_DONE |
- 				DMA_STAT_HALT | DMA_STAT_ERR),
- 				&lp->rx_dma_regs->dmasm);
-+		netif_rx_schedule(dev, &lp->napi);
- 
- 		if (dmas & DMA_STAT_ERR)
- 			printk(KERN_ERR DRV_NAME "%s: DMA error\n", dev->name);
-@@ -350,14 +349,24 @@
- 	struct dma_desc *rd = &lp->rd_ring[lp->rx_next_done];
- 	struct sk_buff *skb, *skb_new;
- 	u8 *pkt_buf;
--	u32 devcs, pkt_len, dmas, rx_free_desc;
-+	u32 devcs, pkt_len, dmas, pktuncrc_len;
- 	int count;
- 
- 	dma_cache_inv((u32)rd, sizeof(*rd));
- 
- 	for (count = 0; count < limit; count++) {
--
-+		skb_new = NULL;
- 		devcs = rd->devcs;
-+		pkt_len = RCVPKT_LENGTH(devcs);
-+		skb = lp->rx_skb[lp->rx_next_done];
-+		
-+		if ((devcs & ETH_RX_LD) != ETH_RX_LD) {
-+			/* check that this is a whole packet
-+			 * WARNING: DMA_FD bit incorrectly set
-+			 * in Rc32434 (errata ref #077) */
-+			dev->stats.rx_errors++;
-+			dev->stats.rx_dropped++;
-+		}
- 
- 		/* Update statistics counters */
- 		if (devcs & ETH_RX_CRC)
-@@ -375,75 +384,79 @@
- 		if (devcs & ETH_RX_MP)
- 			dev->stats.multicast++;
- 
--		if ((devcs & ETH_RX_LD) != ETH_RX_LD) {
--			/* check that this is a whole packet
--			 * WARNING: DMA_FD bit incorrectly set
--			 * in Rc32434 (errata ref #077) */
--			dev->stats.rx_errors++;
--			dev->stats.rx_dropped++;
--		}
--
--		while ((rx_free_desc = KORINA_RBSIZE - (u32)DMA_COUNT(rd->control)) != 0) {
--			/* init the var. used for the later
--			 * operations within the while loop */
--			skb_new = NULL;
--			pkt_len = RCVPKT_LENGTH(devcs);
--			skb = lp->rx_skb[lp->rx_next_done];
--
--			if ((devcs & ETH_RX_ROK)) {
--				/* must be the (first and) last
--				 * descriptor then */
--				pkt_buf = (u8 *)lp->rx_skb[lp->rx_next_done]->data;
-+		else if ((devcs & ETH_RX_ROK)) {
-+			/* must be the (first and) last
-+			 * descriptor then */
-+			pkt_buf = (u8 *)lp->rx_skb[lp->rx_next_done]->data;
-+			pktuncrc_len = pkt_len - 4;
- 
--				/* invalidate the cache */
--				dma_cache_inv((unsigned long)pkt_buf, pkt_len - 4);
-+			/* invalidate the cache */
-+			dma_cache_inv((unsigned long)pkt_buf, pktuncrc_len);
- 
--				/* Malloc up new buffer. */
--				skb_new = netdev_alloc_skb(dev, KORINA_RBSIZE + 2);
-+			/* Malloc up new buffer. */
-+			skb_new = netdev_alloc_skb(dev, KORINA_RBSIZE + 2);
- 
--				if (!skb_new)
--					break;
-+			if (skb_new) {
- 				/* Do not count the CRC */
--				skb_put(skb, pkt_len - 4);
-+				skb_put(skb, pktuncrc_len);
- 				skb->protocol = eth_type_trans(skb, dev);
- 
- 				/* Pass the packet to upper layers */
- 				netif_receive_skb(skb);
-+				
- 				dev->last_rx = jiffies;
- 				dev->stats.rx_packets++;
--				dev->stats.rx_bytes += pkt_len;
--
--				/* Update the mcast stats */
--				if (devcs & ETH_RX_MP)
--					dev->stats.multicast++;
--
-+				dev->stats.rx_bytes += pktuncrc_len;
-+				
- 				lp->rx_skb[lp->rx_next_done] = skb_new;
-+			} else {
-+				dev->stats.rx_errors++;
-+				dev->stats.rx_dropped++;
- 			}
-+		} else {
-+			dev->stats.rx_errors++;
-+			dev->stats.rx_dropped++;
-+			
-+			/* Update statistics counters */
-+			if (devcs & ETH_RX_CRC)
-+				dev->stats.rx_crc_errors++;
-+			else if (devcs & ETH_RX_LOR)
-+				dev->stats.rx_length_errors++;
-+			else if (devcs & ETH_RX_LE)
-+				dev->stats.rx_length_errors++;
-+			else if (devcs & ETH_RX_OVR)
-+				dev->stats.rx_over_errors++;
-+			else if (devcs & ETH_RX_CV)
-+				dev->stats.rx_frame_errors++;
-+			else if (devcs & ETH_RX_CES)
-+				dev->stats.rx_length_errors++;
-+			else if (devcs & ETH_RX_MP)
-+				dev->stats.multicast++;
-+		}
- 
--			rd->devcs = 0;
-+		rd->devcs = 0;
- 
--			/* Restore descriptor's curr_addr */
--			if (skb_new)
--				rd->ca = CPHYSADDR(skb_new->data);
--			else
--				rd->ca = CPHYSADDR(skb->data);
-+		/* Restore descriptor's curr_addr */
-+		if (skb_new)
-+			rd->ca = CPHYSADDR(skb_new->data);
-+		else
-+			rd->ca = CPHYSADDR(skb->data);
- 
--			rd->control = DMA_COUNT(KORINA_RBSIZE) |
-+		rd->control = DMA_COUNT(KORINA_RBSIZE) |
- 				DMA_DESC_COD | DMA_DESC_IOD;
--			lp->rd_ring[(lp->rx_next_done - 1) &
--				KORINA_RDS_MASK].control &=
--				~DMA_DESC_COD;
--
--			lp->rx_next_done = (lp->rx_next_done + 1) & KORINA_RDS_MASK;
--			dma_cache_wback((u32)rd, sizeof(*rd));
--			rd = &lp->rd_ring[lp->rx_next_done];
--			writel(~DMA_STAT_DONE, &lp->rx_dma_regs->dmas);
--		}
-+		lp->rd_ring[(lp->rx_next_done - 1) &
-+			KORINA_RDS_MASK].control &= ~DMA_DESC_COD;
-+
-+		lp->rx_next_done = (lp->rx_next_done + 1) & KORINA_RDS_MASK;
-+		dma_cache_wback((u32)rd, sizeof(*rd));
-+		rd = &lp->rd_ring[lp->rx_next_done];
-+		writel(~DMA_STAT_DONE, &lp->rx_dma_regs->dmas);
- 	}
- 
- 	dmas = readl(&lp->rx_dma_regs->dmas);
- 
- 	if (dmas & DMA_STAT_HALT) {
-+		/* Mask off halt and errors bits */
- 		writel(~(DMA_STAT_HALT | DMA_STAT_ERR),
- 				&lp->rx_dma_regs->dmas);
- 
-@@ -469,8 +482,9 @@
- 	if (work_done < budget) {
- 		netif_rx_complete(dev, napi);
- 
-+		/* Mask off interrupts */
- 		writel(readl(&lp->rx_dma_regs->dmasm) &
--			~(DMA_STAT_DONE | DMA_STAT_HALT | DMA_STAT_ERR),
-+			(DMA_STAT_DONE | DMA_STAT_HALT | DMA_STAT_ERR),
- 			&lp->rx_dma_regs->dmasm);
- 	}
- 	return work_done;
-@@ -534,10 +548,11 @@
- {
- 	struct korina_private *lp = netdev_priv(dev);
- 	struct dma_desc *td = &lp->td_ring[lp->tx_next_done];
-+	unsigned long flags;
- 	u32 devcs;
- 	u32 dmas;
- 
--	spin_lock(&lp->lock);
-+	spin_lock_irqsave(&lp->lock, flags);
- 
- 	/* Process all desc that are done */
- 	while (IS_DMA_FINISHED(td->control)) {
-@@ -610,7 +625,7 @@
- 			~(DMA_STAT_FINI | DMA_STAT_ERR),
- 			&lp->tx_dma_regs->dmasm);
- 
--	spin_unlock(&lp->lock);
-+	spin_unlock_irqrestore(&lp->lock, flags);
- }
- 
- static irqreturn_t
-@@ -624,11 +639,10 @@
- 	dmas = readl(&lp->tx_dma_regs->dmas);
- 
- 	if (dmas & (DMA_STAT_FINI | DMA_STAT_ERR)) {
--		korina_tx(dev);
--
- 		dmasm = readl(&lp->tx_dma_regs->dmasm);
- 		writel(dmasm | (DMA_STAT_FINI | DMA_STAT_ERR),
- 				&lp->tx_dma_regs->dmasm);
-+		korina_tx(dev);
- 
- 		if (lp->tx_chain_status == desc_filled &&
- 			(readl(&(lp->tx_dma_regs->dmandptr)) == 0)) {
-@@ -1078,11 +1092,18 @@
- 
- static int korina_probe(struct platform_device *pdev)
- {
--	struct korina_device *bif = platform_get_drvdata(pdev);
-+	struct korina_device *bif;
- 	struct korina_private *lp;
- 	struct net_device *dev;
- 	struct resource *r;
- 	int rc;
-+	DECLARE_MAC_BUF(mac);
-+
-+	bif = (struct korina_device *)pdev->dev.platform_data;
-+	if (!bif) {
-+		printk(KERN_ERR DRV_NAME ": missing platform_data\n");
-+		return -ENODEV;
-+	}
- 
- 	dev = alloc_etherdev(sizeof(struct korina_private));
- 	if (!dev) {
-@@ -1172,6 +1193,7 @@
- 			": cannot register net device %d\n", rc);
- 		goto probe_err_register;
- 	}
-+	printk(KERN_INFO DRV_NAME ": registered %s, IRQ %d MAC %s\n", dev->name, dev->irq, print_mac(mac, dev->dev_addr));
- out:
- 	return rc;
- 
diff --git a/target/linux/rb532/patches-2.6.27/008-korina_reset_resource_buffer_size_1536.patch b/target/linux/rb532/patches-2.6.27/008-korina_reset_resource_buffer_size_1536.patch
new file mode 100644
index 000000000..1db2e0ecb
--- /dev/null
+++ b/target/linux/rb532/patches-2.6.27/008-korina_reset_resource_buffer_size_1536.patch
@@ -0,0 +1,31 @@
+The new value is the one used in the external patch before and allows at
+least a standard MTU of 1500 to be handled correctly. Impact of this
+change gets visible when bigger packets are to be received, issuing:
+| ping -s 492 <IP>
+and bigger payload sized led to 100% packet loss.
+
+Signed-off-by: Phil Sutter <n0-1@freewrt.org>
+---
+ drivers/net/korina.c |    5 ++++-
+ 1 files changed, 4 insertions(+), 1 deletions(-)
+
+diff --git a/drivers/net/korina.c b/drivers/net/korina.c
+index fefb33d..e30c2f4 100644
+--- a/drivers/net/korina.c
++++ b/drivers/net/korina.c
+@@ -84,7 +84,10 @@
+ #define KORINA_NUM_RDS	64  /* number of receive descriptors */
+ #define KORINA_NUM_TDS	64  /* number of transmit descriptors */
+ 
+-#define KORINA_RBSIZE	536 /* size of one resource buffer = Ether MTU */
++/* KORINA_RBSIZE is the hardware's default maximum receive
++ * frame size in bytes. Having this hardcoded means that there
++ * is no support for MTU sizes greater than 1500. */
++#define KORINA_RBSIZE	1536 /* size of one resource buffer = Ether MTU */
+ #define KORINA_RDS_MASK	(KORINA_NUM_RDS - 1)
+ #define KORINA_TDS_MASK	(KORINA_NUM_TDS - 1)
+ #define RD_RING_SIZE 	(KORINA_NUM_RDS * sizeof(struct dma_desc))
+-- 
+1.5.6.4
+
+
diff --git a/target/linux/rb532/patches-2.6.27/009-korina_disable_napi_on_close_and_restart.patch b/target/linux/rb532/patches-2.6.27/009-korina_disable_napi_on_close_and_restart.patch
new file mode 100644
index 000000000..4eec6fd05
--- /dev/null
+++ b/target/linux/rb532/patches-2.6.27/009-korina_disable_napi_on_close_and_restart.patch
@@ -0,0 +1,33 @@
+Without this the driver will crash when the NIC is being restarted.
+
+Signed-off-by: Phil Sutter <n0-1@freewrt.org>
+---
+ drivers/net/korina.c |    4 ++++
+ 1 files changed, 4 insertions(+), 0 deletions(-)
+
+diff --git a/drivers/net/korina.c b/drivers/net/korina.c
+index e30c2f4..65b8487 100644
+--- a/drivers/net/korina.c
++++ b/drivers/net/korina.c
+@@ -904,6 +904,8 @@ static int korina_restart(struct net_device *dev)
+ 
+ 	korina_free_ring(dev);
+ 
++	napi_disable(&lp->napi);
++
+ 	ret = korina_init(dev);
+ 	if (ret < 0) {
+ 		printk(KERN_ERR DRV_NAME "%s: cannot restart device\n",
+@@ -1070,6 +1072,8 @@ static int korina_close(struct net_device *dev)
+ 
+ 	korina_free_ring(dev);
+ 
++	napi_disable(&lp->napi);
++
+ 	free_irq(lp->rx_irq, dev);
+ 	free_irq(lp->tx_irq, dev);
+ 	free_irq(lp->ovr_irq, dev);
+-- 
+1.5.6.4
+
+
diff --git a/target/linux/rb532/patches-2.6.27/010-korina_rework_korina_rx.patch b/target/linux/rb532/patches-2.6.27/010-korina_rework_korina_rx.patch
new file mode 100644
index 000000000..177678b98
--- /dev/null
+++ b/target/linux/rb532/patches-2.6.27/010-korina_rework_korina_rx.patch
@@ -0,0 +1,138 @@
+This function needs an early exit condition to function properly, or
+else caller assumes napi workload wasn't enough to handle all received
+packets and korina_rx is called again (and again and again and ...).
+
+Signed-off-by: Phil Sutter <n0-1@freewrt.org>
+---
+--- a/drivers/net/korina.c	2009-01-19 23:19:10.000000000 +0100
++++ b/drivers/net/korina.c	2009-01-19 23:25:31.000000000 +0100
+@@ -353,15 +353,20 @@
+ 	struct dma_desc *rd = &lp->rd_ring[lp->rx_next_done];
+ 	struct sk_buff *skb, *skb_new;
+ 	u8 *pkt_buf;
+-	u32 devcs, pkt_len, dmas, rx_free_desc;
++	u32 devcs, pkt_len, dmas;
+ 	int count;
+ 
+ 	dma_cache_inv((u32)rd, sizeof(*rd));
+ 
+ 	for (count = 0; count < limit; count++) {
++		skb = lp->rx_skb[lp->rx_next_done];
++		skb_new = NULL;
+ 
+ 		devcs = rd->devcs;
+ 
++		if ((KORINA_RBSIZE - (u32)DMA_COUNT(rd->control)) == 0)
++			break;
++
+ 		/* Update statistics counters */
+ 		if (devcs & ETH_RX_CRC)
+ 			dev->stats.rx_crc_errors++;
+@@ -384,64 +389,53 @@
+ 			 * in Rc32434 (errata ref #077) */
+ 			dev->stats.rx_errors++;
+ 			dev->stats.rx_dropped++;
+-		}
+-
+-		while ((rx_free_desc = KORINA_RBSIZE - (u32)DMA_COUNT(rd->control)) != 0) {
+-			/* init the var. used for the later
+-			 * operations within the while loop */
+-			skb_new = NULL;
++		} else if ((devcs & ETH_RX_ROK)) {
+ 			pkt_len = RCVPKT_LENGTH(devcs);
+-			skb = lp->rx_skb[lp->rx_next_done];
++			/* must be the (first and) last
++			 * descriptor then */
++			pkt_buf = (u8 *)lp->rx_skb[lp->rx_next_done]->data;
++
++			/* invalidate the cache */
++			dma_cache_inv((unsigned long)pkt_buf, pkt_len - 4);
++
++			/* Malloc up new buffer. */
++			skb_new = netdev_alloc_skb(dev, KORINA_RBSIZE + 2);
++
++			if (!skb_new)
++				break;
++			/* Do not count the CRC */
++			skb_put(skb, pkt_len - 4);
++			skb->protocol = eth_type_trans(skb, dev);
++
++			/* Pass the packet to upper layers */
++			netif_receive_skb(skb);
++			dev->stats.rx_packets++;
++			dev->stats.rx_bytes += pkt_len;
++
++			/* Update the mcast stats */
++			if (devcs & ETH_RX_MP)
++				dev->stats.multicast++;
+ 
+-			if ((devcs & ETH_RX_ROK)) {
+-				/* must be the (first and) last
+-				 * descriptor then */
+-				pkt_buf = (u8 *)lp->rx_skb[lp->rx_next_done]->data;
+-
+-				/* invalidate the cache */
+-				dma_cache_inv((unsigned long)pkt_buf, pkt_len - 4);
+-
+-				/* Malloc up new buffer. */
+-				skb_new = netdev_alloc_skb(dev, KORINA_RBSIZE + 2);
+-
+-				if (!skb_new)
+-					break;
+-				/* Do not count the CRC */
+-				skb_put(skb, pkt_len - 4);
+-				skb->protocol = eth_type_trans(skb, dev);
+-
+-				/* Pass the packet to upper layers */
+-				netif_receive_skb(skb);
+-				dev->last_rx = jiffies;
+-				dev->stats.rx_packets++;
+-				dev->stats.rx_bytes += pkt_len;
+-
+-				/* Update the mcast stats */
+-				if (devcs & ETH_RX_MP)
+-					dev->stats.multicast++;
+-
+-				lp->rx_skb[lp->rx_next_done] = skb_new;
+-			}
+-
+-			rd->devcs = 0;
+-
+-			/* Restore descriptor's curr_addr */
+-			if (skb_new)
+-				rd->ca = CPHYSADDR(skb_new->data);
+-			else
+-				rd->ca = CPHYSADDR(skb->data);
++			lp->rx_skb[lp->rx_next_done] = skb_new;
++		}
++		rd->devcs = 0;
++
++		/* Restore descriptor's curr_addr */
++		if (skb_new)
++			rd->ca = CPHYSADDR(skb_new->data);
++		else
++			rd->ca = CPHYSADDR(skb->data);
+ 
+-			rd->control = DMA_COUNT(KORINA_RBSIZE) |
++		rd->control = DMA_COUNT(KORINA_RBSIZE) |
+ 				DMA_DESC_COD | DMA_DESC_IOD;
+-			lp->rd_ring[(lp->rx_next_done - 1) &
+-				KORINA_RDS_MASK].control &=
+-				~DMA_DESC_COD;
+-
+-			lp->rx_next_done = (lp->rx_next_done + 1) & KORINA_RDS_MASK;
+-			dma_cache_wback((u32)rd, sizeof(*rd));
+-			rd = &lp->rd_ring[lp->rx_next_done];
+-			writel(~DMA_STAT_DONE, &lp->rx_dma_regs->dmas);
+-		}
++		lp->rd_ring[(lp->rx_next_done - 1) &
++			KORINA_RDS_MASK].control &=
++			~DMA_DESC_COD;
++
++		lp->rx_next_done = (lp->rx_next_done + 1) & KORINA_RDS_MASK;
++		dma_cache_wback((u32)rd, sizeof(*rd));
++		rd = &lp->rd_ring[lp->rx_next_done];
++		writel(~DMA_STAT_DONE, &lp->rx_dma_regs->dmas);
+ 	}
+ 
+ 	dmas = readl(&lp->rx_dma_regs->dmas);
diff --git a/target/linux/rb532/patches-2.6.27/011-korina_do_schedule_napi_after_testing_it.patch b/target/linux/rb532/patches-2.6.27/011-korina_do_schedule_napi_after_testing_it.patch
new file mode 100644
index 000000000..c5e1b9a40
--- /dev/null
+++ b/target/linux/rb532/patches-2.6.27/011-korina_do_schedule_napi_after_testing_it.patch
@@ -0,0 +1,18 @@
+The called netif_rx_schedule() does all the work for us:
+- it checks the return value of netif_rx_schedule_prep() and
+- if everything is ok calls __netif_rx_schedule().
+Before this change, the driver received absolutely nothing.
+
+Signed-off-by: Phil Sutter <n0-1@freewrt.org>
+---
+--- a/drivers/net/korina.c	2009-01-19 23:26:19.000000000 +0100
++++ b/drivers/net/korina.c	2009-01-19 23:27:06.000000000 +0100
+@@ -330,7 +330,7 @@
+ 
+ 	dmas = readl(&lp->rx_dma_regs->dmas);
+ 	if (dmas & (DMA_STAT_DONE | DMA_STAT_HALT | DMA_STAT_ERR)) {
+-		netif_rx_schedule_prep(dev, &lp->napi);
++		netif_rx_schedule(dev, &lp->napi);
+ 
+ 		dmasm = readl(&lp->rx_dma_regs->dmasm);
+ 		writel(dmasm | (DMA_STAT_DONE |
diff --git a/target/linux/rb532/patches-2.6.27/012-korina_do_tx_at_right_position.patch b/target/linux/rb532/patches-2.6.27/012-korina_do_tx_at_right_position.patch
new file mode 100644
index 000000000..101e869d0
--- /dev/null
+++ b/target/linux/rb532/patches-2.6.27/012-korina_do_tx_at_right_position.patch
@@ -0,0 +1,40 @@
+Triggering TX before the write to the DMA status mask register leads to
+transferring packets with maximum payload no matter what the actual
+packet size is.
+While here, also trigger RX scheduling after writing the DMA status mask
+register, like it was in the original driver before it was sent
+upstream.
+
+Signed-off-by: Phil Sutter <n0-1@freewrt.org>
+---
+--- a/drivers/net/korina.c	2009-01-19 23:27:41.000000000 +0100
++++ b/drivers/net/korina.c	2009-01-19 23:29:08.000000000 +0100
+@@ -330,12 +330,12 @@
+ 
+ 	dmas = readl(&lp->rx_dma_regs->dmas);
+ 	if (dmas & (DMA_STAT_DONE | DMA_STAT_HALT | DMA_STAT_ERR)) {
+-		netif_rx_schedule(dev, &lp->napi);
+-
+ 		dmasm = readl(&lp->rx_dma_regs->dmasm);
+ 		writel(dmasm | (DMA_STAT_DONE |
+ 				DMA_STAT_HALT | DMA_STAT_ERR),
+ 				&lp->rx_dma_regs->dmasm);
++		
++		netif_rx_schedule(dev, &lp->napi);
+ 
+ 		if (dmas & DMA_STAT_ERR)
+ 			printk(KERN_ERR DRV_NAME "%s: DMA error\n", dev->name);
+@@ -621,11 +621,11 @@
+ 	dmas = readl(&lp->tx_dma_regs->dmas);
+ 
+ 	if (dmas & (DMA_STAT_FINI | DMA_STAT_ERR)) {
+-		korina_tx(dev);
+-
+ 		dmasm = readl(&lp->tx_dma_regs->dmasm);
+ 		writel(dmasm | (DMA_STAT_FINI | DMA_STAT_ERR),
+ 				&lp->tx_dma_regs->dmasm);
++		
++		korina_tx(dev);
+ 
+ 		if (lp->tx_chain_status == desc_filled &&
+ 			(readl(&(lp->tx_dma_regs->dmandptr)) == 0)) {
diff --git a/target/linux/rb532/patches-2.6.27/013-korina_fix_handling_tx_chain_tail.patch b/target/linux/rb532/patches-2.6.27/013-korina_fix_handling_tx_chain_tail.patch
new file mode 100644
index 000000000..6babc3230
--- /dev/null
+++ b/target/linux/rb532/patches-2.6.27/013-korina_fix_handling_tx_chain_tail.patch
@@ -0,0 +1,87 @@
+Originally this must have been a rewrite error when introducing
+'chain_index'. But the original driver did not use the previous chain
+item everywhere: when altering the address tx_chain_tail points to, it
+should move forward, not backwards.
+Also this is not an "index" but rather the penultimate element in the
+chain, so rename it accordingly.
+
+Signed-off-by: Phil Sutter <n0-1@freewrt.org>
+---
+ drivers/net/korina.c |   22 +++++++++++-----------
+ 1 files changed, 11 insertions(+), 11 deletions(-)
+
+diff --git a/drivers/net/korina.c b/drivers/net/korina.c
+index dced5e7..f200175 100644
+--- a/drivers/net/korina.c
++++ b/drivers/net/korina.c
+@@ -199,7 +199,7 @@ static int korina_send_packet(struct sk_buff *skb, struct net_device *dev)
+ 	struct korina_private *lp = netdev_priv(dev);
+ 	unsigned long flags;
+ 	u32 length;
+-	u32 chain_index;
++	u32 chain_prev, chain_next;
+ 	struct dma_desc *td;
+ 
+ 	spin_lock_irqsave(&lp->lock, flags);
+@@ -231,8 +231,8 @@ static int korina_send_packet(struct sk_buff *skb, struct net_device *dev)
+ 	/* Setup the transmit descriptor. */
+ 	dma_cache_inv((u32) td, sizeof(*td));
+ 	td->ca = CPHYSADDR(skb->data);
+-	chain_index = (lp->tx_chain_tail - 1) &
+-			KORINA_TDS_MASK;
++	chain_prev = (lp->tx_chain_tail - 1) & KORINA_TDS_MASK;
++	chain_next = (lp->tx_chain_tail + 1) & KORINA_TDS_MASK;
+ 
+ 	if (readl(&(lp->tx_dma_regs->dmandptr)) == 0) {
+ 		if (lp->tx_chain_status == desc_empty) {
+@@ -240,7 +240,7 @@ static int korina_send_packet(struct sk_buff *skb, struct net_device *dev)
+ 			td->control = DMA_COUNT(length) |
+ 					DMA_DESC_COF | DMA_DESC_IOF;
+ 			/* Move tail */
+-			lp->tx_chain_tail = chain_index;
++			lp->tx_chain_tail = chain_next;
+ 			/* Write to NDPTR */
+ 			writel(CPHYSADDR(&lp->td_ring[lp->tx_chain_head]),
+ 					&lp->tx_dma_regs->dmandptr);
+@@ -251,12 +251,12 @@ static int korina_send_packet(struct sk_buff *skb, struct net_device *dev)
+ 			td->control = DMA_COUNT(length) |
+ 					DMA_DESC_COF | DMA_DESC_IOF;
+ 			/* Link to prev */
+-			lp->td_ring[chain_index].control &=
++			lp->td_ring[chain_prev].control &=
+ 					~DMA_DESC_COF;
+ 			/* Link to prev */
+-			lp->td_ring[chain_index].link =  CPHYSADDR(td);
++			lp->td_ring[chain_prev].link =  CPHYSADDR(td);
+ 			/* Move tail */
+-			lp->tx_chain_tail = chain_index;
++			lp->tx_chain_tail = chain_next;
+ 			/* Write to NDPTR */
+ 			writel(CPHYSADDR(&lp->td_ring[lp->tx_chain_head]),
+ 					&(lp->tx_dma_regs->dmandptr));
+@@ -270,17 +270,17 @@ static int korina_send_packet(struct sk_buff *skb, struct net_device *dev)
+ 			td->control = DMA_COUNT(length) |
+ 					DMA_DESC_COF | DMA_DESC_IOF;
+ 			/* Move tail */
+-			lp->tx_chain_tail = chain_index;
++			lp->tx_chain_tail = chain_next;
+ 			lp->tx_chain_status = desc_filled;
+ 			netif_stop_queue(dev);
+ 		} else {
+ 			/* Update tail */
+ 			td->control = DMA_COUNT(length) |
+ 					DMA_DESC_COF | DMA_DESC_IOF;
+-			lp->td_ring[chain_index].control &=
++			lp->td_ring[chain_prev].control &=
+ 					~DMA_DESC_COF;
+-			lp->td_ring[chain_index].link =  CPHYSADDR(td);
+-			lp->tx_chain_tail = chain_index;
++			lp->td_ring[chain_prev].link =  CPHYSADDR(td);
++			lp->tx_chain_tail = chain_next;
+ 		}
+ 	}
+ 	dma_cache_wback((u32) td, sizeof(*td));
+-- 
+1.5.6.4
+
+
diff --git a/target/linux/rb532/patches-2.6.27/014-korina_do_not_stop_queue_here.patch b/target/linux/rb532/patches-2.6.27/014-korina_do_not_stop_queue_here.patch
new file mode 100644
index 000000000..79ae024b6
--- /dev/null
+++ b/target/linux/rb532/patches-2.6.27/014-korina_do_not_stop_queue_here.patch
@@ -0,0 +1,25 @@
+Apparently this doesn't make sense. Otherwise the queue gets disabled as
+soon as it's getting empty and can only be resurrected by a driver
+restart.
+
+Signed-off-by: Phil Sutter <n0-1@freewrt.org>
+---
+ drivers/net/korina.c |    1 -
+ 1 files changed, 0 insertions(+), 1 deletions(-)
+
+diff --git a/drivers/net/korina.c b/drivers/net/korina.c
+index f200175..bd33fa9 100644
+--- a/drivers/net/korina.c
++++ b/drivers/net/korina.c
+@@ -272,7 +272,6 @@ static int korina_send_packet(struct sk_buff *skb, struct net_device *dev)
+ 			/* Move tail */
+ 			lp->tx_chain_tail = chain_next;
+ 			lp->tx_chain_status = desc_filled;
+-			netif_stop_queue(dev);
+ 		} else {
+ 			/* Update tail */
+ 			td->control = DMA_COUNT(length) |
+-- 
+1.5.6.4
+
+
diff --git a/target/linux/rb532/patches-2.6.27/015-korina_irqf_flags.patch b/target/linux/rb532/patches-2.6.27/015-korina_irqf_flags.patch
new file mode 100644
index 000000000..74059fbeb
--- /dev/null
+++ b/target/linux/rb532/patches-2.6.27/015-korina_irqf_flags.patch
@@ -0,0 +1,53 @@
+As the kernel warning states: "IRQF_DISABLED is not guaranteed on shared
+IRQs". Since these IRQs' values are hardcoded and my test system doesn't
+show any shared use of IRQs at all, rather make them non-shared than
+non-disabled.
+
+Signed-off-by: Phil Sutter <n0-1@freewrt.org>
+---
+ drivers/net/korina.c |    8 ++++----
+ 1 files changed, 4 insertions(+), 4 deletions(-)
+
+diff --git a/drivers/net/korina.c b/drivers/net/korina.c
+index bd33fa9..1d6e48e 100644
+--- a/drivers/net/korina.c
++++ b/drivers/net/korina.c
+@@ -1000,14 +1000,14 @@ static int korina_open(struct net_device *dev)
+ 	 * that handles the Done Finished
+ 	 * Ovr and Und Events */
+ 	ret = request_irq(lp->rx_irq, &korina_rx_dma_interrupt,
+-		IRQF_SHARED | IRQF_DISABLED, "Korina ethernet Rx", dev);
++			IRQF_DISABLED, "Korina ethernet Rx", dev);
+ 	if (ret < 0) {
+ 		printk(KERN_ERR DRV_NAME "%s: unable to get Rx DMA IRQ %d\n",
+ 		    dev->name, lp->rx_irq);
+ 		goto err_release;
+ 	}
+ 	ret = request_irq(lp->tx_irq, &korina_tx_dma_interrupt,
+-		IRQF_SHARED | IRQF_DISABLED, "Korina ethernet Tx", dev);
++			IRQF_DISABLED, "Korina ethernet Tx", dev);
+ 	if (ret < 0) {
+ 		printk(KERN_ERR DRV_NAME "%s: unable to get Tx DMA IRQ %d\n",
+ 		    dev->name, lp->tx_irq);
+@@ -1016,7 +1016,7 @@ static int korina_open(struct net_device *dev)
+ 
+ 	/* Install handler for overrun error. */
+ 	ret = request_irq(lp->ovr_irq, &korina_ovr_interrupt,
+-			IRQF_SHARED | IRQF_DISABLED, "Ethernet Overflow", dev);
++			IRQF_DISABLED, "Ethernet Overflow", dev);
+ 	if (ret < 0) {
+ 		printk(KERN_ERR DRV_NAME"%s: unable to get OVR IRQ %d\n",
+ 		    dev->name, lp->ovr_irq);
+@@ -1025,7 +1025,7 @@ static int korina_open(struct net_device *dev)
+ 
+ 	/* Install handler for underflow error. */
+ 	ret = request_irq(lp->und_irq, &korina_und_interrupt,
+-			IRQF_SHARED | IRQF_DISABLED, "Ethernet Underflow", dev);
++			IRQF_DISABLED, "Ethernet Underflow", dev);
+ 	if (ret < 0) {
+ 		printk(KERN_ERR DRV_NAME "%s: unable to get UND IRQ %d\n",
+ 		    dev->name, lp->und_irq);
+-- 
+1.5.6.4
+
+
diff --git a/target/linux/rb532/patches-2.6.27/016-korina_drop_left_over_assignment.patch b/target/linux/rb532/patches-2.6.27/016-korina_drop_left_over_assignment.patch
new file mode 100644
index 000000000..ab82cb5af
--- /dev/null
+++ b/target/linux/rb532/patches-2.6.27/016-korina_drop_left_over_assignment.patch
@@ -0,0 +1,34 @@
+As the assigned value is being overwritten shortly after, it can be
+dropped and so the whole variable definition moved to the start of the
+function.
+
+Signed-off-by: Phil Sutter <n0-1@freewrt.org>
+---
+ drivers/net/korina.c |    3 +--
+ 1 files changed, 1 insertions(+), 2 deletions(-)
+
+diff --git a/drivers/net/korina.c b/drivers/net/korina.c
+index 60ae7bf..75010ca 100644
+--- a/drivers/net/korina.c
++++ b/drivers/net/korina.c
+@@ -743,6 +743,7 @@ static struct ethtool_ops netdev_ethtool_ops = {
+ static void korina_alloc_ring(struct net_device *dev)
+ {
+ 	struct korina_private *lp = netdev_priv(dev);
++	struct sk_buff *skb;
+ 	int i;
+ 
+ 	/* Initialize the transmit descriptors */
+@@ -758,8 +759,6 @@ static void korina_alloc_ring(struct net_device *dev)
+ 
+ 	/* Initialize the receive descriptors */
+ 	for (i = 0; i < KORINA_NUM_RDS; i++) {
+-		struct sk_buff *skb = lp->rx_skb[i];
+-
+ 		skb = dev_alloc_skb(KORINA_RBSIZE + 2);
+ 		if (!skb)
+ 			break;
+-- 
+1.5.6.4
+
+
diff --git a/target/linux/rb532/patches-2.6.27/017-korina_fix_loop_back_rx_desc.patch b/target/linux/rb532/patches-2.6.27/017-korina_fix_loop_back_rx_desc.patch
new file mode 100644
index 000000000..0484f2cbe
--- /dev/null
+++ b/target/linux/rb532/patches-2.6.27/017-korina_fix_loop_back_rx_desc.patch
@@ -0,0 +1,36 @@
+After the last loop iteration, i has the value RC32434_NUM_RDS and
+therefore leads to an index overflow when used afterwards to address the
+last element. This is yet another another bug introduced when rewriting
+parts of the driver for upstream preparation, as the original driver
+used 'RC32434_NUM_RDS - 1' instead.
+
+Signed-off-by: Phil Sutter <n0-1@freewrt.org>
+---
+ drivers/net/korina.c |    9 +++++----
+ 1 files changed, 5 insertions(+), 4 deletions(-)
+
+diff --git a/drivers/net/korina.c b/drivers/net/korina.c
+index 1d6e48e..67fbdf4 100644
+--- a/drivers/net/korina.c
++++ b/drivers/net/korina.c
+@@ -769,11 +769,12 @@ static void korina_alloc_ring(struct net_device *dev)
+ 		lp->rd_ring[i].link = CPHYSADDR(&lp->rd_ring[i+1]);
+ 	}
+ 
+-	/* loop back */
+-	lp->rd_ring[i].link = CPHYSADDR(&lp->rd_ring[0]);
+-	lp->rx_next_done  = 0;
++	/* loop back receive descriptors, so the last
++	 * descriptor points to the first one */
++	lp->rd_ring[i - 1].link = CPHYSADDR(&lp->rd_ring[0]);
++	lp->rd_ring[i - 1].control |= DMA_DESC_COD;
+ 
+-	lp->rd_ring[i].control |= DMA_DESC_COD;
++	lp->rx_next_done  = 0;
+ 	lp->rx_chain_head = 0;
+ 	lp->rx_chain_tail = 0;
+ 	lp->rx_chain_status = desc_empty;
+-- 
+1.5.6.4
+
+
diff --git a/target/linux/rb532/patches-2.6.27/018-korina_adjust_headroom.patch b/target/linux/rb532/patches-2.6.27/018-korina_adjust_headroom.patch
new file mode 100644
index 000000000..f9f8daccc
--- /dev/null
+++ b/target/linux/rb532/patches-2.6.27/018-korina_adjust_headroom.patch
@@ -0,0 +1,28 @@
+This is copy and paste from the original driver. As skb_reserve() is
+also called within korina_alloc_ring() when initially allocating the
+receive descriptors, the same should be done when allocating new space
+after passing an skb to upper layers.
+
+Signed-off-by: Phil Sutter <n0-1@freewrt.org>
+---
+ drivers/net/korina.c |    3 +++
+ 1 files changed, 3 insertions(+), 0 deletions(-)
+
+diff --git a/drivers/net/korina.c b/drivers/net/korina.c
+index 67fbdf4..60ae7bf 100644
+--- a/drivers/net/korina.c
++++ b/drivers/net/korina.c
+@@ -416,6 +416,9 @@ static int korina_rx(struct net_device *dev, int limit)
+ 			if (devcs & ETH_RX_MP)
+ 				dev->stats.multicast++;
+ 
++			/* 16 bit align */
++			skb_reserve(skb_new, 2);
++
+ 			lp->rx_skb[lp->rx_next_done] = skb_new;
+ 		}
+ 
+-- 
+1.5.6.4
+
+
diff --git a/target/linux/rb532/patches-2.6.27/019-korina_set_dev_field_allocated_skb.patch b/target/linux/rb532/patches-2.6.27/019-korina_set_dev_field_allocated_skb.patch
new file mode 100644
index 000000000..bec351488
--- /dev/null
+++ b/target/linux/rb532/patches-2.6.27/019-korina_set_dev_field_allocated_skb.patch
@@ -0,0 +1,33 @@
+I'm not sure if this is necessary, but the original driver did it and
+apparently also many other drivers do it, so it should not be completely
+wrong to do it.
+
+Signed-off-by: Phil Sutter <n0-1@freewrt.org>
+---
+ drivers/net/korina.c |    2 ++
+ 1 files changed, 2 insertions(+), 0 deletions(-)
+
+diff --git a/drivers/net/korina.c b/drivers/net/korina.c
+index 75010ca..56b4db2 100644
+--- a/drivers/net/korina.c
++++ b/drivers/net/korina.c
+@@ -419,6 +419,7 @@ static int korina_rx(struct net_device *dev, int limit)
+ 			/* 16 bit align */
+ 			skb_reserve(skb_new, 2);
+ 
++			skb_new->dev = dev;
+ 			lp->rx_skb[lp->rx_next_done] = skb_new;
+ 		}
+ 
+@@ -763,6 +764,7 @@ static void korina_alloc_ring(struct net_device *dev)
+ 		if (!skb)
+ 			break;
+ 		skb_reserve(skb, 2);
++		skb->dev = dev;
+ 		lp->rx_skb[i] = skb;
+ 		lp->rd_ring[i].control = DMA_DESC_IOD |
+ 				DMA_COUNT(KORINA_RBSIZE);
+-- 
+1.5.6.4
+
+
diff --git a/target/linux/rb532/patches-2.6.27/009-rc32434_res_name.patch b/target/linux/rb532/patches-2.6.27/020-rc32434_res_name.patch
index e61ec8330..e61ec8330 100644
--- a/target/linux/rb532/patches-2.6.27/009-rc32434_res_name.patch
+++ b/target/linux/rb532/patches-2.6.27/020-rc32434_res_name.patch
diff --git a/target/linux/rb532/patches-2.6.27/021-rb532_driver_data.patch b/target/linux/rb532/patches-2.6.27/021-rb532_driver_data.patch
new file mode 100644
index 000000000..9aaeef334
--- /dev/null
+++ b/target/linux/rb532/patches-2.6.27/021-rb532_driver_data.patch
@@ -0,0 +1,26 @@
+As the korina ethernet driver uses platform_get_drvdata() to extract the
+driver specific data from the platform device, driver_data has to be
+used here.
+
+Signed-off-by: Phil Sutter <n0-1@freewrt.org>
+---
+ arch/mips/rb532/devices.c |    2 +-
+ 1 files changed, 1 insertions(+), 1 deletions(-)
+
+diff --git a/arch/mips/rb532/devices.c b/arch/mips/rb532/devices.c
+index 9b6b744..3c74561 100644
+--- a/arch/mips/rb532/devices.c
++++ b/arch/mips/rb532/devices.c
+@@ -89,7 +89,7 @@ static struct korina_device korina_dev0_data = {
+ static struct platform_device korina_dev0 = {
+ 	.id = -1,
+ 	.name = "korina",
+-	.dev.platform_data = &korina_dev0_data,
++	.dev.driver_data = &korina_dev0_data,
+ 	.resource = korina_dev0_res,
+ 	.num_resources = ARRAY_SIZE(korina_dev0_res),
+ };
+-- 
+1.5.6.4
+
+
diff --git a/target/linux/rb532/patches-2.6.27/022-rb532_uart_autodetect.patch b/target/linux/rb532/patches-2.6.27/022-rb532_uart_autodetect.patch
new file mode 100644
index 000000000..ae42a4dbc
--- /dev/null
+++ b/target/linux/rb532/patches-2.6.27/022-rb532_uart_autodetect.patch
@@ -0,0 +1,91 @@
+Auto-detection works just fine, so use it instead of specifying the type
+manually. Also define a platform device for the uart, as suggested by
+David Daney.
+
+Signed-off-by: Phil Sutter <n0-1@freewrt.org>
+---
+ arch/mips/rb532/devices.c |   26 ++++++++++++++++++++++++++
+ arch/mips/rb532/serial.c  |    2 +-
+ 2 files changed, 27 insertions(+), 1 deletions(-)
+
+diff --git a/arch/mips/rb532/devices.c b/arch/mips/rb532/devices.c
+index c1c2918..9b6b744 100644
+--- a/arch/mips/rb532/devices.c
++++ b/arch/mips/rb532/devices.c
+@@ -24,6 +24,7 @@
+ #include <linux/mtd/partitions.h>
+ #include <linux/gpio_keys.h>
+ #include <linux/input.h>
++#include <linux/serial_8250.h>
+ 
+ #include <asm/bootinfo.h>
+ 
+@@ -39,6 +40,8 @@
+ #define ETH0_RX_DMA_ADDR  (DMA0_BASE_ADDR + 0 * DMA_CHAN_OFFSET)
+ #define ETH0_TX_DMA_ADDR  (DMA0_BASE_ADDR + 1 * DMA_CHAN_OFFSET)
+ 
++extern unsigned int idt_cpu_freq;
++
+ static struct resource korina_dev0_res[] = {
+ 	{
+ 		.name = "korina_regs",
+@@ -214,12 +217,32 @@ static struct platform_device rb532_wdt = {
+ 	.num_resources	= ARRAY_SIZE(rb532_wdt_res),
+ };
+ 
++static struct plat_serial8250_port rb532_uart_res[] = {
++	{
++		.membase	= (char *)KSEG1ADDR(REGBASE + UART0BASE),
++		.irq		= UART0_IRQ,
++		.regshift	= 2,
++		.iotype		= UPIO_MEM,
++		.flags		= UPF_BOOT_AUTOCONF,
++	},
++	{
++		.flags		= 0,
++	}
++};
++
++static struct platform_device rb532_uart = {
++	.name              = "serial8250",
++	.id                = PLAT8250_DEV_PLATFORM,
++	.dev.platform_data = &rb532_uart_res,
++};
++
+ static struct platform_device *rb532_devs[] = {
+ 	&korina_dev0,
+ 	&nand_slot0,
+ 	&cf_slot0,
+ 	&rb532_led,
+ 	&rb532_button,
++	&rb532_uart,
+ 	&rb532_wdt
+ };
+ 
+@@ -294,6 +317,9 @@ static int __init plat_setup_devices(void)
+ 	/* Initialise the NAND device */
+ 	rb532_nand_setup();
+ 
++	/* set the uart clock to the current cpu frequency */
++	rb532_uart_res[0].uartclk = idt_cpu_freq;
++
+ 	return platform_add_devices(rb532_devs, ARRAY_SIZE(rb532_devs));
+ }
+ 
+diff --git a/arch/mips/rb532/serial.c b/arch/mips/rb532/serial.c
+index 3e0d7ec..00ed19f 100644
+--- a/arch/mips/rb532/serial.c
++++ b/arch/mips/rb532/serial.c
+@@ -36,7 +36,7 @@
+ extern unsigned int idt_cpu_freq;
+ 
+ static struct uart_port rb532_uart = {
+-	.type = PORT_16550A,
++	.flags = UPF_BOOT_AUTOCONF,
+ 	.line = 0,
+ 	.irq = UART0_IRQ,
+ 	.iotype = UPIO_MEM,
+-- 
+1.5.6.4
+
+
diff --git a/target/linux/rb532/patches-2.6.27/023-rb532_fix_init_of_rb532_dev3_ctl_res.patch b/target/linux/rb532/patches-2.6.27/023-rb532_fix_init_of_rb532_dev3_ctl_res.patch
new file mode 100644
index 000000000..64a6d8934
--- /dev/null
+++ b/target/linux/rb532/patches-2.6.27/023-rb532_fix_init_of_rb532_dev3_ctl_res.patch
@@ -0,0 +1,32 @@
+This register just contains the address of the actual resource, so
+initialisation has to be the same as cf_slot0_res and nand_slot0_res.
+
+Signed-off-by: Phil Sutter <n0-1@freewrt.org>
+---
+diff --git a/arch/mips/rb532/gpio.c b/arch/mips/rb532/gpio.c
+index d75eb19..40deb11 100644
+--- a/arch/mips/rb532/gpio.c
++++ b/arch/mips/rb532/gpio.c
+@@ -55,8 +55,6 @@ static struct resource rb532_gpio_reg0_res[] = {
+ static struct resource rb532_dev3_ctl_res[] = {
+ 	{
+ 		.name	= "dev3_ctl",
+-		.start	= REGBASE + DEV3BASE,
+-		.end	= REGBASE + DEV3BASE + sizeof(struct dev_reg) - 1,
+ 		.flags	= IORESOURCE_MEM,
+ 	}
+ };
+@@ -243,6 +241,9 @@ int __init rb532_gpio_init(void)
+ 	/* Register our GPIO chip */
+ 	gpiochip_add(&rb532_gpio_chip->chip);
+ 
++	rb532_dev3_ctl_res[0].start = readl(IDT434_REG_BASE + DEV3BASE);
++	rb532_dev3_ctl_res[0].end = rb532_dev3_ctl_res[0].start + 0x1000;
++
+ 	r = rb532_dev3_ctl_res;
+ 	dev3.base = ioremap_nocache(r->start, r->end - r->start);
+ 
+-- 
+1.5.6.4
+
+
diff --git a/target/linux/rb532/patches-2.6.27/024-rb532_fix_set_latch_u5.patch b/target/linux/rb532/patches-2.6.27/024-rb532_fix_set_latch_u5.patch
new file mode 100644
index 000000000..fc0c77ec2
--- /dev/null
+++ b/target/linux/rb532/patches-2.6.27/024-rb532_fix_set_latch_u5.patch
@@ -0,0 +1,23 @@
+The data to be written is just a byte, so use writeb instead of writel.
+Also, dev3.base contains the address, not the data so referencing here
+is wrong.
+
+Signed-off-by: Phil Sutter <n0-1@freewrt.org>
+---
+diff --git a/arch/mips/rb532/gpio.c b/arch/mips/rb532/gpio.c
+index 40deb11..7e0cb4f 100644
+--- a/arch/mips/rb532/gpio.c
++++ b/arch/mips/rb532/gpio.c
+@@ -93,7 +93,7 @@ void set_latch_u5(unsigned char or_mask, unsigned char nand_mask)
+ 	spin_lock_irqsave(&dev3.lock, flags);
+ 
+ 	dev3.state = (dev3.state | or_mask) & ~nand_mask;
+-	writel(dev3.state, &dev3.base);
++	writeb(dev3.state, dev3.base);
+ 
+ 	spin_unlock_irqrestore(&dev3.lock, flags);
+ }
+-- 
+1.5.6.4
+
+
diff --git a/target/linux/rb532/patches-2.6.27/025-rb532_nand_fixup.patch b/target/linux/rb532/patches-2.6.27/025-rb532_nand_fixup.patch
new file mode 100644
index 000000000..709160980
--- /dev/null
+++ b/target/linux/rb532/patches-2.6.27/025-rb532_nand_fixup.patch
@@ -0,0 +1,48 @@
+--- a/arch/mips/rb532/devices.c	2009-01-25 13:36:15.000000000 +0100
++++ b/arch/mips/rb532/devices.c	2009-01-25 14:00:56.000000000 +0100
+@@ -119,6 +119,19 @@
+ };
+ 
+ /* Resources and device for NAND */
++
++/*
++ * We need to use the OLD Yaffs-1 OOB layout, otherwise the RB bootloader
++ * will not be able to find the kernel that we load.  So set the oobinfo
++ * when creating the partitions
++ */
++static struct nand_ecclayout rb532_nand_ecclayout = {
++	.eccbytes       = 6,
++	.eccpos         = { 8, 9, 10, 13, 14, 15 },
++	.oobavail       = 9,
++	.oobfree        = { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } }
++};
++
+ static int rb532_dev_ready(struct mtd_info *mtd)
+ {
+ 	return gpio_get_value(GPIO_RDY);
+@@ -277,6 +290,16 @@
+ /* NAND definitions */
+ #define NAND_CHIP_DELAY	25
+ 
++static int rb532_nand_fixup(struct mtd_info *mtd)
++{
++	struct nand_chip *chip = mtd->priv;
++
++	if (mtd->writesize == 512)
++		chip->ecc.layout = &rb532_nand_ecclayout;
++
++	return 0;
++}
++
+ static void __init rb532_nand_setup(void)
+ {
+ 	switch (mips_machtype) {
+@@ -296,6 +319,8 @@
+ 	rb532_nand_data.chip.partitions = rb532_partition_info;
+ 	rb532_nand_data.chip.chip_delay = NAND_CHIP_DELAY;
+ 	rb532_nand_data.chip.options = NAND_NO_AUTOINCR;
++	
++	rb532_nand_data.chip.chip_fixup = &rb532_nand_fixup;
+ }
+ 
+