summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorArtur Artamonov <freeartman@wechall.net>2013-09-27 11:10:13 +0300
committerArtur Artamonov <freeartman@wechall.net>2013-09-27 11:10:13 +0300
commit661143c8cba1e6e62bc7c107f183c8a63aec7272 (patch)
treeebe97816c611b34aece9a9d8fa075fbf2c1a5f45
parenta2348724b8d84c4859f1f9d21c878c999562f30b (diff)
Removed arch/rlx/bsp directory
-rw-r--r--target/linux/realtek/files/arch/rlx/bsp/Makefile19
-rw-r--r--target/linux/realtek/files/arch/rlx/bsp/bspchip.h571
-rw-r--r--target/linux/realtek/files/arch/rlx/bsp/bspcpu.h54
-rw-r--r--target/linux/realtek/files/arch/rlx/bsp/bspinit.h18
-rw-r--r--target/linux/realtek/files/arch/rlx/bsp/dev_usb.c317
-rw-r--r--target/linux/realtek/files/arch/rlx/bsp/dev_usb.h38
-rw-r--r--target/linux/realtek/files/arch/rlx/bsp/irq.c380
-rw-r--r--target/linux/realtek/files/arch/rlx/bsp/kgdb.c81
-rw-r--r--target/linux/realtek/files/arch/rlx/bsp/pci.c1265
-rw-r--r--target/linux/realtek/files/arch/rlx/bsp/prom.c184
-rw-r--r--target/linux/realtek/files/arch/rlx/bsp/rlxhack.h21
-rw-r--r--target/linux/realtek/files/arch/rlx/bsp/serial.c94
-rw-r--r--target/linux/realtek/files/arch/rlx/bsp/setup.c196
-rw-r--r--target/linux/realtek/files/arch/rlx/bsp/timer.c146
-rw-r--r--target/linux/realtek/files/arch/rlx/bsp/vmlinux.lds.S296
15 files changed, 0 insertions, 3680 deletions
diff --git a/target/linux/realtek/files/arch/rlx/bsp/Makefile b/target/linux/realtek/files/arch/rlx/bsp/Makefile
deleted file mode 100644
index 0406f03e0..000000000
--- a/target/linux/realtek/files/arch/rlx/bsp/Makefile
+++ /dev/null
@@ -1,19 +0,0 @@
-include $(TOPDIR)/.config
-
-core-y += arch/rlx/bsp/
-cflags-y += -Iinclude/asm-rlx -Iarch/rlx/bsp/
-#load-y += 0xffffffff80000000
-load-y += 0x80000000
-
-extra-y += vmlinux.lds
-
-obj-y := irq.o prom.o serial.o setup.o timer.o
-obj-$(CONFIG_PCI) += pci.o
-obj-$(CONFIG_ARCH_BUS_USB) += dev_usb.o
-
-EXTRA_AFLAGS := $(CFLAGS)
-EXTRA_CFLAGS += -I$(TOPDIR)/drivers/net/rtl819x/AsicDriver
-EXTRA_CFLAGS += -I$(TOPDIR)/drivers/net/rtl819x/common
-ifdef CONFIG_RTL_819X_SWCORE
-EXTRA_CFLAGS += -DCONFIG_RTL_819X_SWCORE
-endif
diff --git a/target/linux/realtek/files/arch/rlx/bsp/bspchip.h b/target/linux/realtek/files/arch/rlx/bsp/bspchip.h
deleted file mode 100644
index 0df3f510e..000000000
--- a/target/linux/realtek/files/arch/rlx/bsp/bspchip.h
+++ /dev/null
@@ -1,571 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * Copyright (C) 2006, Realtek Semiconductor Corp.
- * Copyright (C) 2013, Artur Artamonov <artur@advem.lv>
- */
-
-#ifndef __LEXRA_BSP_H
-#define __LEXRA_BSP_H
-
-#include <linux/autoconf.h>
-
-#include "rlxhack.h"
-
-#define PADDR(addr) ((addr) & 0x1FFFFFFF)
-
-/*
- * IRQ Controller
- */
-#define BSP_IRQ_CPU_BASE 0
-#define BSP_IRQ_CPU_NUM 8
-
-#define BSP_IRQ_LOPI_BASE (BSP_IRQ_CPU_BASE + BSP_IRQ_CPU_NUM)
-#define BSP_IRQ_LOPI_NUM 8
-
-#define BSP_IRQ_ICTL_BASE (BSP_IRQ_LOPI_BASE + BSP_IRQ_LOPI_NUM)
-#define BSP_IRQ_ICTL_NUM 32
-
-/*
- * ====================================
- * Platform Configurable Common Options
- * ====================================
- */
-
-#define BSP_SYS_CLK_RATE (200000000) //HS1 clock : 200 MHz
-#define BSP_BAUDRATE 38400 // ex. 19200 or 38400 or 57600 or 115200
- //For Early Debug
-
-/*
- * RTL8196b Interrupt Scheme (Subject to change)
- *
- * Source EXT_INT CPU INT LOPI IRQ
- * -------- ------- ------- ------- ------
- * PCIB0TO 0 2 - 16+0
- * PCIB1TO 1 2 - 16+1
- * LBCTMOm0 2 2 - 16+2
- * LBCTMOm1 3 2 - 16+3
- * LBCTMOs 4 2 - 16+4
- * TIMER0 8 - 5 8+5
- * TIMER1 9 2 - 16+9
- * USB 10 - 1 8+1
- * UART0 12 2 - 16+12
- * UART1 13 2 - 16+13
- * VoIP 14 2 - 16+14
- * SWCORE 15 - 4 8+4
- * GPIO_ABCD 16 2 - 16+16
- * GPIO_EFGH 17 2 - 16+17
- * NFBI 18 - 6 8+6
- * PCM 19 - 7 8+7
- * CRYPTO 20 2 - 16+20
- * PCIE0 21 - 2 8+2
- * PCIE1 22 - 3 8+3
- * I2S 26 - 0 8+6
- */
-
-/*
- * IRQ Mapping
- */
-#define BSP_ICTL_IRQ (BSP_IRQ_CPU_BASE + 2) //for irq cascade
-
-//----------------------------------------------------------------------
-#if defined(CONFIG_RTL_8196C)
-#define BSP_ICTL_IRQ (BSP_IRQ_CPU_BASE + 2) //for irq cascade
-#define BSP_TC0_IRQ (13) /* BSP_IRQ_LOPI_BASE + 5 */
-#define BSP_TC1_IRQ (BSP_IRQ_ICTL_BASE + 15)
-#define BSP_USB_IRQ (10) /* BSP_IRQ_LOPI_BASE + 2 */
-//#define BSP_UART0_IRQ (BSP_IRQ_ICTL_BASE + 0)
-#define BSP_UART0_IRQ (BSP_IRQ_ICTL_BASE + 7) /* BSP_IRQ_LOPI_BASE + 0 */
-#define BSP_SWCORE_IRQ (12) /* BSP_IRQ_LOPI_BASE + 4 */
-#define BSP_GPIO_ABCD_IRQ (BSP_IRQ_ICTL_BASE + 9)
-#define BSP_PCIE_IRQ (11) /* BSP_IRQ_LOPI_BASE + 3 */
-#define BSP_NFBI_IRQ 15) /* BSP_IRQ_LOPI_BASE + 7 */
-//----------------------------------------------------------------------
-
-//#elseif CONFIG_RTL_819XD
-#elif defined(CONFIG_RTL_819XD)
-#define BSP_PCIB0TMO_IRQ (BSP_IRQ_ICTL_BASE + 0)
-#define BSP_PCIB1TMO_IRQ (BSP_IRQ_ICTL_BASE + 1)
-#define BSP_LBCTMOm0_IRQ (BSP_IRQ_ICTL_BASE + 2)
-#define BSP_LBCTMOm1_IRQ (BSP_IRQ_ICTL_BASE + 3)
-#define BSP_LBCTMOs_IRQ (BSP_IRQ_ICTL_BASE + 4)
-#define BSP_TC0_IRQ (13) /* BSP_IRQ_LOPI_BASE + 5 */
-#define BSP_TC1_IRQ (BSP_IRQ_ICTL_BASE + 9)
-#define BSP_USB_IRQ (10) /* BSP_IRQ_LOPI_BASE + 2 */
-#define BSP_OTG_IRQ (15) //(BSP_IRQ_LOPI_BASE + 7) //wei add ,bit 15=8+7
-//#define BSP_UART0_IRQ (BSP_IRQ_ICTL_BASE + 0)
-#define BSP_UART0_IRQ (8) /* BSP_IRQ_LOPI_BASE + 0 */
-#define BSP_UART1_IRQ (BSP_IRQ_ICTL_BASE + 13)
-#define BSP_SWCORE_IRQ (12) /* BSP_IRQ_LOPI_BASE + 4 */
-#define BSP_GPIO_ABCD_IRQ (BSP_IRQ_ICTL_BASE + 16)
-#define BSP_GPIO_EFGH_IRQ (BSP_IRQ_ICTL_BASE + 17)
-#define BSP_NFBI_IRQ (15) /* BSP_IRQ_LOPI_BASE + 7 */
-#define BSP_PCM_IRQ (9) /* BSP_IRQ_LOPI_BASE + 1 */
-#define BSP_CRYPTO_IRQ (BSP_IRQ_ICTL_BASE + 20)
-#define BSP_GDMA_IRQ (BSP_IRQ_ICTL_BASE + 23)
-#define BSP_PCIE_IRQ (11) /* BSP_IRQ_LOPI_BASE + 3 */
-#define BSP_PCIE2_IRQ (14) /* BSP_IRQ_LOPI_BASE + 6 */
-//#define BSP_I2S_IRQ (BSP_IRQ_LOPI_BASE + 0)
-//#define BSP_I2S_IRQ (BSP_IRQ_ICTL_BASE + 12)
-#endif
-/*
- * Interrupt Routing Selection
- */
-#define BSP_IRQ_CASCADE 2
-#define BSP_PTM_RS BSP_IRQ_CASCADE
-#define BSP_LBCTMOs2_RS BSP_IRQ_CASCADE
-#define BSP_LBCTMOs1_RS BSP_IRQ_CASCADE
-#define BSP_PKT_RS BSP_IRQ_CASCADE
-#define BSP_SPI_RS BSP_IRQ_CASCADE
-#define BSP_NIC100_RS BSP_IRQ_CASCADE
-#define BSP_SAR_RS BSP_IRQ_CASCADE
-#define BSP_DMT_RS BSP_IRQ_CASCADE
-#define BSP_PCIE_RS BSP_PCIE_IRQ
-#define BSP_PCIE2_RS BSP_PCIE2_IRQ
-#define BSP_GDMA_RS BSP_IRQ_CASCADE
-#define BSP_SECURITY_RS BSP_IRQ_CASCADE
-#if defined(CONFIG_RTL_8196C)
- #define BSP_PCM_RS BSP_IRQ_CASCADE
-#else
- #define BSP_PCM_RS BSP_PCM_IRQ
-#endif
-#define BSP_NFBI_RS BSP_NFBI_IRQ
-#define BSP_GPIO_EFGH_RS BSP_IRQ_CASCADE
-#define BSP_GPIO_ABCD_RS BSP_IRQ_CASCADE
-#define BSP_SW_RS BSP_SWCORE_IRQ
-//#define BSP_UART0_RS BSP_UART0_IRQ
-#define BSP_UART0_RS BSP_IRQ_CASCADE
-#define BSP_UART1_RS BSP_IRQ_CASCADE
-#define BSP_USB_D_RS BSP_IRQ_CASCADE
-#define BSP_USB_H_RS BSP_USB_IRQ
-#define BSP_OTG_RS BSP_OTG_IRQ
-#define BSP_TC0_RS BSP_TC0_IRQ//13
-#define BSP_TC1_RS BSP_IRQ_CASCADE
-#define BSP_LBCTMOm2_RS BSP_IRQ_CASCADE
-#define BSP_LBCTMOm1_RS BSP_IRQ_CASCADE
-#define BSP_SPEED_RS BSP_IRQ_CASCADE
-#define BSP_LBCTMOs0_RS BSP_IRQ_CASCADE
-#define BSP_LBCTMOm0_RS BSP_IRQ_CASCADE
-#define BSP_OCPTMO_RS BSP_IRQ_CASCADE
-#define BSP_PCIB0TO_RS BSP_IRQ_CASCADE
-#define BSP_NONE BSP_IRQ_CASCADE
-#define BSP_PCIB0TMO_RS BSP_IRQ_CASCADE
-#define BSP_PCIB1TMO_RS BSP_IRQ_CASCADE
-#define BSP_LBCTMOs_RS BSP_IRQ_CASCADE
-#define BSP_CRYPTO_RS BSP_IRQ_CASCADE
-//#define BSP_I2S_RS BSP_I2S_IRQ
-//#define BSP_I2S_RS BSP_IRQ_CASCADE
-
-#if defined(CONFIG_RTL_8196C)
- #define BSP_DIVISOR 1000
-#else
- #define BSP_DIVISOR 8000
-#endif
-
-#if BSP_DIVISOR > (1 << 16)
-#error "Exceed the Maximum Value of DivFactor"
-#endif
-
-/*
- * ==========================
- * Platform Register Settings
- * ==========================
- */
-
-/*
- * CPU
- */
-
-#define BSP_IMEM_BASE 0x00C00000
-#define BSP_IMEM_TOP 0x00C03FFF
-
-#define BSP_DMEM_BASE 0x00C04000
-#define BSP_DMEM_TOP 0x00C05FFF
-
-/*
- * Memory Controller
- */
-#define BSP_MC_MCR 0xB8001000
-#define BSP_MC_MCR_VAL 0x92A28000
-
-#define BSP_MC_MTCR0 0xB8001004
-#define BSP_MC_MTCR0_VAL 0x12120000
-
-#define BSP_MC_MTCR1 0xB8001008
-#define BSP_MC_MTCR1_VAL 0x00000FEB
-
-#define BSP_MC_PFCR 0xB8001010
-#define BSP_MC_PFCR_VAL 0x00000101
-
-
-#define BSP_MC_BASE 0xB8001000
-#define BSP_NCR (BSP_MC_BASE + 0x100)
-#define BSP_NSR (BSP_MC_BASE + 0x104)
-#define BSP_NCAR (BSP_MC_BASE + 0x108)
-#define BSP_NADDR (BSP_MC_BASE + 0x10C)
-#define BSP_NDR (BSP_MC_BASE + 0x110)
-
-#define BSP_SFCR (BSP_MC_BASE + 0x200)
-#define BSP_SFDR (BSP_MC_BASE + 0x204)
-
-/*
-* UART
-*/
-#define BSP_UART0_BASE 0xB8002000
-#define BSP_UART0_MAP_BASE 0x18002000
-#define BSP_UART0_RBR (BSP_UART0_BASE + 0x000)
-#define BSP_UART0_THR (BSP_UART0_BASE + 0x000)
-#define BSP_UART0_DLL (BSP_UART0_BASE + 0x000)
-#define BSP_UART0_IER (BSP_UART0_BASE + 0x004)
-#define BSP_UART0_DLM (BSP_UART0_BASE + 0x004)
-#define BSP_UART0_IIR (BSP_UART0_BASE + 0x008)
-#define BSP_UART0_FCR (BSP_UART0_BASE + 0x008)
-#define BSP_UART0_LCR (BSP_UART0_BASE + 0x00C)
-#define BSP_UART0_MCR (BSP_UART0_BASE + 0x010)
-#define BSP_UART0_LSR (BSP_UART0_BASE + 0x014)
-
-#define BSP_UART1_BASE 0xB8002100
-#define BSP_UART1_MAP_BASE 0x18002100
-#define BSP_UART1_RBR (BSP_UART1_BASE + 0x000)
-#define BSP_UART1_THR (BSP_UART1_BASE + 0x000)
-#define BSP_UART1_DLL (BSP_UART1_BASE + 0x000)
-#define BSP_UART1_IER (BSP_UART1_BASE + 0x004)
-#define BSP_UART1_DLM (BSP_UART1_BASE + 0x004)
-#define BSP_UART1_IIR (BSP_UART1_BASE + 0x008)
-#define BSP_UART1_FCR (BSP_UART1_BASE + 0x008)
-#define BSP_FCR_EN 0x01
-#define BSP_FCR_RXRST 0x02
-#define BSP_RXRST 0x02
-#define BSP_FCR_TXRST 0x04
-#define BSP_TXRST 0x04
-#define BSP_FCR_DMA 0x08
-#define BSP_FCR_RTRG 0xC0
-#define BSP_CHAR_TRIGGER_01 0x00
-#define BSP_CHAR_TRIGGER_04 0x40
-#define BSP_CHAR_TRIGGER_08 0x80
-#define BSP_CHAR_TRIGGER_14 0xC0
-#define BSP_UART1_LCR (BSP_UART1_BASE + 0x00C)
-#define BSP_LCR_WLN 0x03
-#define BSP_CHAR_LEN_5 0x00
-#define BSP_CHAR_LEN_6 0x01
-#define BSP_CHAR_LEN_7 0x02
-#define BSP_CHAR_LEN_8 0x03
-#define BSP_LCR_STB 0x04
-#define BSP_ONE_STOP 0x00
-#define BSP_TWO_STOP 0x04
-#define BSP_LCR_PEN 0x08
-#define BSP_PARITY_ENABLE 0x01
-#define BSP_PARITY_DISABLE 0x00
-#define BSP_LCR_EPS 0x30
-#define BSP_PARITY_ODD 0x00
-#define BSP_PARITY_EVEN 0x10
-#define BSP_PARITY_MARK 0x20
-#define BSP_PARITY_SPACE 0x30
-#define BSP_LCR_BRK 0x40
-#define BSP_LCR_DLAB 0x80
-#define BSP_DLAB 0x80
-#define BSP_UART1_MCR (BSP_UART1_BASE + 0x010)
-#define BSP_UART1_LSR (BSP_UART1_BASE + 0x014)
-#define BSP_LSR_DR 0x01
-#define BSP_RxCHAR_AVAIL 0x01
-#define BSP_LSR_OE 0x02
-#define BSP_LSR_PE 0x04
-#define BSP_LSR_FE 0x08
-#define BSP_LSR_B 0x10
-#define BSP_LSR_THRE 0x20
-#define BSP_TxCHAR_AVAIL 0x00
-#define BSP_TxCHAR_EMPTY 0x20
-#define BSP_LSR_TEMT 0x40
-#define BSP_LSR_RFE 0x80
-
-/*
- * Interrupt Controller
- */
-#define BSP_GIMR 0xB8003000
-
-#if defined(CONFIG_RTL_8196C)
-
-#define BSP_USB_H_IE (1 << 16)
-#define BSP_TC1_IE (1 << 15)
-#define BSP_TC0_IE (1 << 14)
-#define BSP_GDMA_IE (1 << 11)
-#define BSP_PCIE_IE (1 << 10) // shall be 22
-#define BSP_PCI_IE (1 << 10)
-#define BSP_GPIO_ABCD_IE 1 << 9)
-#define BSP_SW_IE (1 << 8)
-#define BSP_UART0_IE (1 << 7)
-
-#else
-
-#define BSP_I2S_IE (1 << 26)
-#define BSP_GDMA_IE (1 << 23)
-#define BSP_PCIE2_IE (1 << 22)
-#define BSP_PCIE_IE (1 << 21) // shall be 22
-#define BSP_CRYPTO_IE (1 << 20)
-#define BSP_PCM_IE (1 << 19)
-#define BSP_NFBI_IE (1 << 18)
-#define BSP_GPIO_EFGH_IE (1 << 17)
-#define BSP_GPIO_ABCD_IE (1 << 16)
-#define BSP_SW_IE (1 << 15)
-#define BSP_PCI_IE (1 << 14)
-#define BSP_UART1_IE (1 << 13)
-#define BSP_UART0_IE (1 << 12)
-#define BSP_OTG_IE (1 << 11) //wei add
-#define BSP_USB_H_IE (1 << 10)
-#define BSP_TC1_IE (1 << 9)
-#define BSP_TC0_IE (1 << 8)
-#define BSP_LBCTMOs_IE (1 << 4)
-#define BSP_LBCTMOm1_IE (1 << 3)
-#define BSP_LBCTMOm0_IE (1 << 2)
-#define BSP_PCIB1TO_IE (1 << 1)
-#define BSP_PCIB0TO_IE (1 << 0)
-#endif
-
-
-#define BSP_GISR 0xB8003004
-
-#if defined(CONFIG_RTL_8196C)
-
-#define BSP_USB_H_IP (1 << 16)
-#define BSP_TC1_IP (1 << 15)
-#define BSP_TC0_IP (1 << 14)
-#define BSP_GDMA_IP (1 << 11)
-#define BSP_PCIE_IP (1 << 10)
-#define BSP_PCI_IP (1 << 10)
-#define BSP_GPIO_ABCD_IP (1 << 9)
-#define BSP_SW_IP (1 << 8)
-#define BSP_UART0_IP (1 << 7)
-
-#elif defined(CONFIG_RTL_819XD)
-
-#define BSP_I2S_IP (1 << 26)
-#define BSP_GDMA_IP (1 << 23)
-#define BSP_PCIE2_IP (1 << 21)
-#define BSP_PCIE_IP (1 << 22) // shall be 22
-#define BSP_CRYPTO_IP (1 << 20)
-#define BSP_PCM_IP (1 << 19)
-#define BSP_NFBI_IP (1 << 18)
-#define BSP_GPIO_EFGH_IP (1 << 17)
-#define BSP_GPIO_ABCD_IP (1 << 16)
-#define BSP_SW_IP (1 << 15)
-#define BSP_PCI_IP (1 << 14)
-#define BSP_UART1_IP (1 << 13)
-#define BSP_UART0_IP (1 << 12)
-#define BSP_OTG_IP (1 << 11)//wei add
-#define BSP_USB_H_IP (1 << 10)
-#define BSP_TC1_IP (1 << 9)
-#define BSP_TC0_IP (1 << 8)
-#define BSP_LBCTMOs_IP (1 << 4)
-#define BSP_LBCTMOm1_IP (1 << 3)
-#define BSP_LBCTMOm0_IP (1 << 2)
-#define BSP_PCIB1TO_IP (1 << 1)
-#define BSP_PCIB0TO_IP (1 << 0)
-
-#endif
-
-//----------------------------------------------------------------------
-#define BSP_IRR0 0xB8003008
-#if defined(CONFIG_RTL_8196C)
-
-#define BSP_IRR0_SETTING ((BSP_UART0_RS << 28) | \
- (BSP_NONE << 24) | \
- (BSP_NONE<< 20) | \
- (BSP_NONE << 16) | \
- (BSP_NONE << 12) | \
- (BSP_NONE << 8) | \
- (BSP_NONE<< 4) | \
- (BSP_NONE<< 0) \
-)
-
-#else
-
-#define BSP_IRR0_SETTING ((BSP_LBCTMOm2_RS << 28) | \
- (BSP_LBCTMOm1_RS << 24) | \
- (BSP_SPEED_RS<< 20) | \
- (BSP_LBCTMOs0_RS << 16) | \
- (BSP_LBCTMOm0_RS << 12) | \
- (BSP_OCPTMO_RS << 8) | \
- (BSP_NONE<< 4) | \
- (BSP_PCIB0TO_RS<< 0) \
-)
-
-#endif
-
-
-#define BSP_IRR1 0xB800300C
-
-#if defined(CONFIG_RTL_8196C)
-
-#define BSP_IRR1_SETTING ((BSP_TC1_RS<<28) |\
- (BSP_TC0_RS<<24) |\
- (BSP_NONE<<20) |\
- (BSP_OCPTMO_RS<<16) |\
- (BSP_GDMA_RS<<12) |\
- (BSP_PCIE_RS<<8) |\
- (BSP_GPIO_ABCD_RS<<4) |\
- (BSP_SW_RS<<0) \
-)
-#else
-
-#define BSP_IRR1_SETTING ((BSP_SW_RS<< 28) | \
- (BSP_NONE<< 24) | \
- (BSP_UART1_RS << 20) | \
- (BSP_UART0_RS << 16) | \
- (BSP_OTG_RS << 12) | \
- (BSP_USB_H_RS << 8) | \
- (BSP_TC1_RS << 4) | \
- (BSP_TC0_RS << 0) \
-)
-#endif
-
-
-#define BSP_IRR2 0xB8003010
-
-#if defined(CONFIG_RTL_8196C)
-
-#define BSP_IRR2_SETTING ((BSP_NONE<< 28) | \
- (BSP_NONE << 24) | \
- (BSP_NONE<< 20) | \
- (BSP_NONE<< 16) | \
- (BSP_NONE << 12) | \
- (BSP_NONE<< 8) | \
- (BSP_PCM_RS << 4) | \
- (BSP_USB_H_RS << 0) \
-)
-
-#else
-
-#define BSP_IRR2_SETTING ((BSP_GDMA_RS<< 28) | \
- (BSP_PCIE2_RS << 24) | \
- (BSP_PCIE_RS<< 20) | \
- (BSP_SECURITY_RS<< 16) | \
- (BSP_PCM_RS << 12) | \
- (BSP_NFBI_RS<< 8) | \
- (BSP_GPIO_EFGH_RS << 4) | \
- (BSP_GPIO_ABCD_RS << 0) \
-)
-
-#endif
-
-
-#define BSP_IRR3 0xB8003014
-
-#if defined(CONFIG_RTL_8196C)
-
-#define BSP_IRR3_SETTING ((BSP_NONE<< 28) | \
- (BSP_NONE << 24) | \
- (BSP_NONE << 20) | \
- (BSP_NONE<< 16) | \
- (BSP_NONE<< 12) | \
- (BSP_NONE << 8) | \
- (BSP_NONE<< 4) | \
- (BSP_NONE<< 0) \
-)
-
-#else
-
-#define BSP_IRR3_SETTING ((BSP_PTM_RS<< 28) | \
- (BSP_LBCTMOs2_RS << 24) | \
- (BSP_LBCTMOs1_RS << 20) | \
- (BSP_PKT_RS<< 16) | \
- (BSP_SPI_RS<< 12) | \
- (BSP_SAR_RS<< 4) | \
- (BSP_DMT_RS<< 0) \
-)
-
-#endif
-
-/*
- * Timer/Counter
- */
-#define BSP_TC_BASE 0xB8003100
-#define BSP_TC0DATA (BSP_TC_BASE + 0x00)
-#define BSP_TC1DATA (BSP_TC_BASE + 0x04)
-#define BSP_TCD_OFFSET 8
-#define BSP_TC0CN (BSP_TC_BASE + 0x08)
-#define BSP_TC1CNT (BSP_TC_BASE + 0x0C)
-#define BSP_TCCNR (BSP_TC_BASE + 0x10)
-#define BSP_TC0EN (1 << 31)
-#define BSP_TC0MODE_TIMER (1 << 30)
-#define BSP_TC1EN (1 << 29)
-#define BSP_TC1MODE_TIMER (1 << 28)
-#define BSP_TCIR (BSP_TC_BASE + 0x14)
-#define BSP_TC0IE (1 << 31)
-#define BSP_TC1IE (1 << 30)
-#define BSP_TC0IP (1 << 29)
-#define BSP_TC1IP (1 << 28)
-#define BSP_CDBR (BSP_TC_BASE + 0x18)
-#define BSP_DIVF_OFFSET 16
-#define BSP_WDTCNR (BSP_TC_BASE + 0x1C)
-
-
-/*
- * PCIE Host Controller
- */
-#define BSP_PCIE0_H_CFG 0xB8B00000
-#define BSP_PCIE0_H_EXT 0xB8B01000
-#define BSP_PCIE0_H_MDIO (BSP_PCIE0_H_EXT + 0x00)
-#define BSP_PCIE0_H_INTSTR (BSP_PCIE0_H_EXT + 0x04)
-#define BSP_PCIE0_H_PWRCR (BSP_PCIE0_H_EXT + 0x08)
-#define BSP_PCIE0_H_IPCFG (BSP_PCIE0_H_EXT + 0x0C)
-#define BSP_PCIE0_H_MISC (BSP_PCIE0_H_EXT + 0x10)
-#define BSP_PCIE0_D_CFG0 0xB8B10000
-#define BSP_PCIE0_D_CFG1 0xB8B11000
-#define BSP_PCIE0_D_MSG 0xB8B12000
-
-#define BSP_PCIE1_H_CFG 0xB8B20000
-#define BSP_PCIE1_H_EXT 0xB8B21000
-#define BSP_PCIE1_H_MDIO (BSP_PCIE1_H_EXT + 0x00)
-#define BSP_PCIE1_H_INTSTR (BSP_PCIE1_H_EXT + 0x04)
-#define BSP_PCIE1_H_PWRCR (BSP_PCIE1_H_EXT + 0x08)
-#define BSP_PCIE1_H_IPCFG (BSP_PCIE1_H_EXT + 0x0C)
-#define BSP_PCIE1_H_MISC (BSP_PCIE1_H_EXT + 0x10)
-#define BSP_PCIE1_D_CFG0 0xB8B30000
-#define BSP_PCIE1_D_CFG1 0xB8B31000
-#define BSP_PCIE1_D_MSG 0xB8B32000
-
-#define BSP_PCIE0_D_IO 0xB8C00000
-#define BSP_PCIE1_D_IO 0xB8E00000
-#define BSP_PCIE_FUN_OFS 0xC00000
-#define BSP_PCIE0_D_MEM 0xB9000000
-#define BSP_PCIE0_F1_D_MEM (BSP_PCIE0_D_MEM + BSP_PCIE_FUN_OFS)
-#define BSP_PCIE1_D_MEM 0xBA000000
-#define BSP_PCIE1_F1_D_MEM (BSP_PCIE1_D_MEM + BSP_PCIE_FUN_OFS)
-
-
-
-#define BSP_REVR 0xB8000000
-//becouse of
-//drivers/net/wireless/rtl8192cd/8192cd_osdep.c: In function 'rtl8192cd_init_one':
-//drivers/net/wireless/rtl8192cd/8192cd_osdep.c:5866:9: error: 'REVR' undeclared
-#define REVR 0xB8000000
-#define BSP_RTL8198_REVISION_A 0xC0000000
-#define BSP_RTL8198_REVISION_B 0xC0000001
-#define BSP_RTL8197D 0x8197C000
-#define RTL8196C_REVISION_A 0x80000001
-#define RTL8196C_REVISION_B 0x80000002
-
-
-
-#if defined(CONFIG_RTL_92D_SUPPORT)
-#define BSP_CLK_MANAGE 0xb8000010
-#endif
-
-
-#ifdef CONFIG_RTL_USB_IP_HOST_SPEEDUP
-#define __IRAM_USB //__attribute__ ((section(".iram-rtkusb")))
-//? here was taftology check orig sources
-#endif
-
-
-
-
-
-
-
-
-#endif
-
diff --git a/target/linux/realtek/files/arch/rlx/bsp/bspcpu.h b/target/linux/realtek/files/arch/rlx/bsp/bspcpu.h
deleted file mode 100644
index 2bcef4534..000000000
--- a/target/linux/realtek/files/arch/rlx/bsp/bspcpu.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * Copyright (C) 2006, Realtek Semiconductor Corp.
- * Copyright (C) 2013, Artur Artamonov (artur@advem.lv)
- */
-
-#ifndef __LEXRA_BSPCPU_H
-#define __LEXRA_BSPCPU_H
-
-#if defined(CONFIG_RTL_8196C)
-
-#define cpu_scache_size 0
-#define cpu_dcache_size ( 8 << 10)
-#define cpu_icache_size (16 << 10)
-#define cpu_scache_line 0
-#define cpu_dcache_line 16
-#define cpu_icache_line 16
-#define cpu_dcache_line_mask 0xF /*cpu_dcache_line-1*/
-#define cpu_icache_line_mask 0xF /*cpu_icache_line-1*/
-#define cpu_tlb_entry 32
-//#define cpu_mem_size (64 << 20)
-#define cpu_mem_size (32 << 20)
-//#define cpu_mem_size ((7 << 20)-16) //reserve 16 byte for firmware header
-
-#define cpu_imem_size 0
-#define cpu_dmem_size 0
-#define cpu_smem_size 0
-
-#elif defined(CONFIG_RTL_819XD)
-
-#define cpu_scache_size 0
-#define cpu_dcache_size ( 32 << 10)
-#define cpu_icache_size (64 << 10)
-#define cpu_scache_line 0
-#define cpu_dcache_line 32
-#define cpu_icache_line 32
-#define cpu_dcache_line_mask 0x1F /*cpu_dcache_line-1*/
-#define cpu_icache_line_mask 0x1F /*cpu_icache_line-1*/
-#define cpu_tlb_entry 32
-
-//#define cpu_mem_size (64 << 20)
-//#define cpu_mem_size (16 << 20)
-
-#define cpu_imem_size 0
-#define cpu_dmem_size 0
-#define cpu_smem_size 0
-
-#endif
-
-#endif
diff --git a/target/linux/realtek/files/arch/rlx/bsp/bspinit.h b/target/linux/realtek/files/arch/rlx/bsp/bspinit.h
deleted file mode 100644
index e7dddccb4..000000000
--- a/target/linux/realtek/files/arch/rlx/bsp/bspinit.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * Realtek Semiconductor Corp.
- *
- * bspinit.h:
- *
- * Tony Wu (tonywu@realtek.com.tw)
- * Dec. 7, 2007
- */
-#ifndef __BSPINIT_H_
-#define __BSPINIT_H_
-
-.macro kernel_entry_setup
-.endm
-
-.macro smp_slave_setup
-.endm
-
-#endif
diff --git a/target/linux/realtek/files/arch/rlx/bsp/dev_usb.c b/target/linux/realtek/files/arch/rlx/bsp/dev_usb.c
deleted file mode 100644
index 10aa2e4d3..000000000
--- a/target/linux/realtek/files/arch/rlx/bsp/dev_usb.c
+++ /dev/null
@@ -1,317 +0,0 @@
-/*
- * Realte rtl819x USB host device support
- *
- * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- * Parts of this file are based on Atheros' 2.6.15 BSP
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/dma-mapping.h>
-#include <linux/platform_device.h>
-
-#include "bspchip.h"
-#include "dev_usb.h"
-
-/*
- * OHCI (USB full speed host controller)
- */
-static struct resource rtl819x_ohci_resources[] = {
- [0] = {
- .start = PADDR(OHCI_RTL819x_USB_BASE),
- .end = PADDR(OHCI_RTL819x_USB_BASE) + OHCI_RTL819x_USB_REG_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = RTL819x_USB_IRQ,
- .end = RTL819x_USB_IRQ,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static u64 rtl819x_ohci_dmamask = RTL819x_DMA_MASK;
-static struct platform_device rtl819x_ohci_device = {
- .name = "rtl819x-ohci",
- .id = -1,
- .resource = rtl819x_ohci_resources,
- .num_resources = ARRAY_SIZE(rtl819x_ohci_resources),
- .dev = {
- .dma_mask = &rtl819x_ohci_dmamask,
- .coherent_dma_mask = RTL819x_DMA_MASK,
- },
-};
-
-/*
- * EHCI (USB high/full speed host controller)
- */
-static struct resource rtl819x_ehci_resources[] = {
- [0] = {
- .start = PADDR(EHCI_RTL819x_USB_BASE),
- .end = PADDR(EHCI_RTL819x_USB_BASE) + EHCI_RTL819x_USB_REG_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = RTL819x_USB_IRQ,
- .end = RTL819x_USB_IRQ,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static u64 rtl819x_ehci_dmamask = RTL819x_DMA_MASK;
-
-struct rtl819x_ehci_platform_data {
- u8 is_rtl819x;
-};
-
-static struct rtl819x_ehci_platform_data rtl819x_ehci_data;
-
-static struct platform_device rtl819x_ehci_device = {
- .name = "rtl819x-ehci",
- .id = -1,
- .resource = rtl819x_ehci_resources,
- .num_resources = ARRAY_SIZE(rtl819x_ehci_resources),
- .dev = {
- .dma_mask = &rtl819x_ehci_dmamask,
- .coherent_dma_mask = RTL819x_DMA_MASK,
- .platform_data = &rtl819x_ehci_data,
- },
-};
-
-void SetUSBPhy(unsigned char reg, unsigned char val)
-{
-
- #define USB2_PHY_DELAY {mdelay(5);}
-
- //8196C demo board: 0xE0:99, 0xE1:A8, 0xE2:98, 0xE3:C1, 0xE5:91,
-
-#if !CONFIG_RTL_819XD //8198
- REG32(0xb8000034) = (0x1f00 | val); USB2_PHY_DELAY;
-#else //8196D
- #define SYS_USB_SIE 0xb8000034
- #define SYS_USB_PHY 0xb8000090
- int oneportsel=(REG32(SYS_USB_SIE) & (1<<18))>>18;
-
- unsigned int tmp = REG32(SYS_USB_PHY); //8672 only
- tmp = tmp & ~((0xff<<11)|(0xff<<0));
-
-
- if(oneportsel==0)
- { REG32(SYS_USB_PHY) = (val << 0) | tmp; //phy 0
- }
- else
- { REG32(SYS_USB_PHY) = (val << 11) | tmp; //phy1
- }
-
- USB2_PHY_DELAY;
-#endif
- //printk("0xb8000034=%08x\n", REG32(0xb8000034));
-
- unsigned char reg_h=(reg &0xf0)>>4;
- unsigned char reg_l=(reg &0x0f);
-
- mdelay(100);
- REG32(0xb80210A4) = (0x00300000 | (reg_l<<16)); USB2_PHY_DELAY;
- REG32(0xb80210A4) = (0x00200000 | (reg_l<<16)); USB2_PHY_DELAY;
- REG32(0xb80210A4) = (0x00300000 | (reg_l<<16)); USB2_PHY_DELAY;
- REG32(0xb80210A4) = (0x00300000 | (reg_h<<16)); USB2_PHY_DELAY;
- REG32(0xb80210A4) = (0x00200000 | (reg_h<<16)); USB2_PHY_DELAY;
- REG32(0xb80210A4) = (0x00300000 | (reg_h<<16)); USB2_PHY_DELAY;
-}
-
-unsigned char GetUSBPhy(unsigned char reg)
-{
- #define USB2_PHY_DELAY {mdelay(5);}
-
- unsigned char reg_h=((reg &0xf0)>>4)-2;
- unsigned char reg_l=(reg &0x0f);
-
- REG32(0xb80210A4) = (0x00300000 | (reg_l<<16)); USB2_PHY_DELAY;
- REG32(0xb80210A4) = (0x00200000 | (reg_l<<16)); USB2_PHY_DELAY;
- REG32(0xb80210A4) = (0x00300000 | (reg_l<<16)); USB2_PHY_DELAY;
- REG32(0xb80210A4) = (0x00300000 | (reg_h<<16)); USB2_PHY_DELAY;
- REG32(0xb80210A4) = (0x00200000 | (reg_h<<16)); USB2_PHY_DELAY;
- REG32(0xb80210A4) = (0x00300000 | (reg_h<<16)); USB2_PHY_DELAY;
-
- unsigned char val;
- val=REG32(0xb80210A4)>>24;
- //printk("reg=%x val=%x\n",reg, val);
- return val;
-}
-
-static void synopsys_usb_patch(void)
-{
-
-#define USB2_PHY_DELAY {int i=100; while(i>0) {i--;}}
- /* Patch: for USB 2.0 PHY */
-#if !defined(CONFIG_RTL_8196C)
- /* For Port-0 */
- REG32(0xb8003314) = 0x0000000E; USB2_PHY_DELAY;
- REG32(0xb80210A4) = 0x00340000; USB2_PHY_DELAY;
- REG32(0xb80210A4) = 0x00240000; USB2_PHY_DELAY;
- REG32(0xb80210A4) = 0x00340000; USB2_PHY_DELAY;
- REG32(0xb80210A4) = 0x003E0000; USB2_PHY_DELAY;
- REG32(0xb80210A4) = 0x002E0000; USB2_PHY_DELAY;
- REG32(0xb80210A4) = 0x003E0000; USB2_PHY_DELAY;
- REG32(0xb8003314) = 0x000000D8; USB2_PHY_DELAY;
- REG32(0xb80210A4) = 0x00360000; USB2_PHY_DELAY;
- REG32(0xb80210A4) = 0x00260000; USB2_PHY_DELAY;
- REG32(0xb80210A4) = 0x00360000; USB2_PHY_DELAY;
- REG32(0xb80210A4) = 0x003E0000; USB2_PHY_DELAY;
- REG32(0xb80210A4) = 0x002E0000; USB2_PHY_DELAY;
- REG32(0xb80210A4) = 0x003E0000; USB2_PHY_DELAY;
-
- /* For Port-1 */
- REG32(0xb8003314) = 0x000E0000; USB2_PHY_DELAY;
- REG32(0xb80210A4) = 0x00540000; USB2_PHY_DELAY;
- REG32(0xb80210A4) = 0x00440000; USB2_PHY_DELAY;
- REG32(0xb80210A4) = 0x00540000; USB2_PHY_DELAY;
- REG32(0xb80210A4) = 0x005E0000; USB2_PHY_DELAY;
- REG32(0xb80210A4) = 0x004E0000; USB2_PHY_DELAY;
- REG32(0xb80210A4) = 0x005E0000; USB2_PHY_DELAY;
- REG32(0xb8003314) = 0x00D80000; USB2_PHY_DELAY;
- REG32(0xb80210A4) = 0x00560000; USB2_PHY_DELAY;
- REG32(0xb80210A4) = 0x00460000; USB2_PHY_DELAY;
- REG32(0xb80210A4) = 0x00560000; USB2_PHY_DELAY;
- REG32(0xb80210A4) = 0x005E0000; USB2_PHY_DELAY;
- REG32(0xb80210A4) = 0x004E0000; USB2_PHY_DELAY;
- REG32(0xb80210A4) = 0x005E0000; USB2_PHY_DELAY;
-
- printk("USB 2.0 Phy Patch(D): &0xb80210A4 = %08x\n", REG32(0xb80210A4)); /* A85E0000 */
-
-#elif defined(CONFIG_RTL_8196C)
-
- //disable Host chirp J-K
- SetUSBPhy(0xf4,0xe3); GetUSBPhy(0xf4);
- //8196C demo board: 0xE0:99, 0xE1:A8, 0xE2:98, 0xE3:C1, 0xE5:91,
- SetUSBPhy(0xe0,0x99); if(GetUSBPhy(0xe0)!=0x99) printk("reg 0xe0 not correct\n");
- SetUSBPhy(0xe1,0xa8); if(GetUSBPhy(0xe1)!=0xa8) printk("reg 0xe1 not correct\n");
- SetUSBPhy(0xe2,0x98); if(GetUSBPhy(0xe2)!=0x98) printk("reg 0xe2 not correct\n");
- SetUSBPhy(0xe3,0xc1); if(GetUSBPhy(0xe3)!=0xc1) printk("reg 0xe3 not correct\n");
- SetUSBPhy(0xe5,0x91); if(GetUSBPhy(0xe5)!=0x91) printk("reg 0xe5 not correct\n");
-
- //test packet.
- /*
- REG32(0xb8021054)=0x85100000;
- REG32(0xb8021010)=0x08000100;
- REG32(0xb8021054)=0x85180400;
- */
- printk("USB 2.0 PHY Patch Done.\n");
-
-#else
- printk("========================== NO PATCH USB 2.0 PHY =====================\n");
-#endif
- return;
-}
-//--------------------------------------------
-void EnableUSBPHY(int portnum)
-{
- if(portnum==0)
- {
- //phy0
- REG32(0xb8000090) |= (1<<8); //USBPHY_EN=1
- REG32(0xb8000090) |= (1<<9); //usbphy_reset=1, active high
- REG32(0xb8000090) &= ~(1<<9); //usbphy_reset=0, active high
- REG32(0xb8000090) |= (1<<10); //active_usbphyt=1
- }
- else
- {
- //phy1
- REG32(0xb8000090) |= (1<<19); //USBPHY_EN=1
- REG32(0xb8000090) |= (1<<20); //usbphy_reset=1, active high
- REG32(0xb8000090) &= ~(1<<20); //usbphy_reset=0, active high
- REG32(0xb8000090) |= (1<<21); //active_usbphyt=1
- }
-}
-
-static void __init rtl819x_usb_setup(void)
-{
-
-#if !defined(CONFIG_RTL_819XD) //8198
- REG32(0xb8000010)=REG32(0xb8000010)|(1<<17);
-#else //8196D
-
- //one port sel
- //is 0: phy#1 connect OTG mac, EHCI is in phy0
- //is 1: phy#1 connect EHCI mac
-
-#ifdef CONFIG_RTL_USB_OTG
- int oneportsel=0;
- REG32(0xb8000034) &= ~(1<<18); //one port sel=0
-#else
-#if 1 //software force
- int oneportsel=1;
- if(oneportsel==1)
- { REG32(0xb8000034) |= (1<<18); //one port sel=1
- }
- else
- { REG32(0xb8000034) &= ~(1<<18); //one port sel=0
- }
-#else //read-back decide
- int oneportsel= (REG32(0xb8000034) & (1<<18))>>18;
- printk("EHCI: one_port_host_sel=%d, EHCI in Port %s\n", oneportsel, (oneportsel==0) ? "0": "1");
-#endif
-#endif
- //sie
- REG32(0xb8000034) |= (1<<11); //s_utmi_suspend0=1
- REG32(0xb8000034) |= (1<<12); //en_usbhost=1
- REG32(0xb8000034) |= (1<<17); //enable pgbndry_disable=1
-
- if(oneportsel==1)
- {
- EnableUSBPHY(1);
- }
- else
- {
- //phy0, phy1
-#ifdef CONFIG_RTL_OTGCTRL
- extern unsigned int TurnOn_OTGCtrl_Interrupt(unsigned int);
- unsigned int old= TurnOn_OTGCtrl_Interrupt(0);
-#endif
- EnableUSBPHY(0);
- EnableUSBPHY(1);
-#ifdef CONFIG_RTL_OTGCTRL
- TurnOn_OTGCtrl_Interrupt(old);
-#endif
- }
-
- //ip clock mgr
- REG32(0xb8000010) |= (1<<12)|(1<<13)|(1<<19)|(1<<20); //enable lx1, lx2
- REG32(0xb8000010) |= (1<<21); //enable host ip
-
- mdelay(100);
- //printk("b8021000=%x\n", REG32(0xb8021000) );
- //printk("b8021054=%x\n", REG32(0xb8021054) );
-#endif
-
- /*register platform device*/
- platform_device_register(&rtl819x_ehci_device);
- platform_device_register(&rtl819x_ohci_device);
-
-#if defined(CONFIG_RTL_8196C)
- synopsys_usb_patch();
-#endif
-
-
-#if 1 //wei add
- //dump
- int i;
- for(i=0xe0;i<=0xe7; i++)
- printk("reg %x=%x\n", i,GetUSBPhy(i) );
- for(i=0xf0;i<=0xf6; i++)
- printk("reg %x=%x\n", i,GetUSBPhy(i) );
-#endif
-
- return 0;
-}
-
-void __init rtl819x_add_device_usb(void)
-{
- rtl819x_usb_setup();
-}
-
diff --git a/target/linux/realtek/files/arch/rlx/bsp/dev_usb.h b/target/linux/realtek/files/arch/rlx/bsp/dev_usb.h
deleted file mode 100644
index 22ad6cf1c..000000000
--- a/target/linux/realtek/files/arch/rlx/bsp/dev_usb.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/* Copyright (c) 2005 freescale semiconductor
- * Copyright (c) 2005 MontaVista Software
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#include "bspchip.h"
-#ifndef _USB_RTL819x_H
-#define _USB_RTL819x_H
-#define PADDR(addr) ((addr) & 0x1FFFFFFF)
-
-/* USB 2.0 Host
- * OHCI: 0xB802_0000 ~ 0xB802_0FFF (len = 0x1000)
- * EHCI: 0xB802_1000 ~ 0xB802_FFFF (len = 0xF000)
- */
-
-//#define REG32(reg) (*((volatile unsigned int *)(reg)))
-#define OHCI_RTL819x_USB_BASE 0xb8020000
-#define OHCI_RTL819x_USB_REG_SIZE 0x1000
-//#define OHCI_RTL819x_USB_REG_SIZE sizeof(struct ohci_regs)
-/* offsets for the non-ehci registers in the FSL SOC USB controller */
-#define EHCI_RTL819x_USB_BASE 0xb8021000
-#define EHCI_RTL819x_USB_REG_SIZE 0xf000
-//#define EHCI_RTL819x_USB_REG_SIZE sizeof(struct ehci_regs)
-#define RTL819x_USB_IRQ BSP_USB_IRQ
-#define RTL819x_DMA_MASK 0xffffffffUL
-#endif /* _USB_RTL819x_H_ */
diff --git a/target/linux/realtek/files/arch/rlx/bsp/irq.c b/target/linux/realtek/files/arch/rlx/bsp/irq.c
deleted file mode 100644
index 489a72386..000000000
--- a/target/linux/realtek/files/arch/rlx/bsp/irq.c
+++ /dev/null
@@ -1,380 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * Copyright (C) 2013, Artur Artamonov <artur@advem.lv>
- */
-
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/kernel_stat.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/timex.h>
-#include <linux/slab.h>
-#include <linux/random.h>
-#include <linux/irq.h>
-
-#include <asm/bitops.h>
-#include <asm/bootinfo.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/irq_cpu.h>
-#include <asm/irq_vec.h>
-#include <asm/system.h>
-
-#include <asm/rlxregs.h>
-#include <asm/rlxbsp.h>
-#include <net/rtl/rtl_types.h>
-
-#include "bspchip.h"
-#include "rlxhack.h"
-
-static struct irqaction irq_cascade = {
- .handler = no_action,
- .mask = CPU_MASK_NONE,
- .name = "cascade",
-};
-
-static void bsp_ictl_irq_mask(unsigned int irq)
-{
- REG32(BSP_GIMR) &= ~(1 << (irq - BSP_IRQ_ICTL_BASE));
-}
-
-static void bsp_ictl_irq_unmask(unsigned int irq)
-{
- REG32(BSP_GIMR) |= (1 << (irq - BSP_IRQ_ICTL_BASE));
-}
-
-static struct irq_chip bsp_ictl_irq = {
- .typename = "ICTL",
- .ack = bsp_ictl_irq_mask,
- .mask = bsp_ictl_irq_mask,
- .mask_ack = bsp_ictl_irq_mask,
- .unmask = bsp_ictl_irq_unmask,
-};
-
-static void bsp_ictl_irq_dispatch(void)
-{
- volatile unsigned int pending;
-
- pending = REG32(BSP_GIMR) & REG32(BSP_GISR);
-
- if (pending & BSP_UART0_IP)
- do_IRQ(BSP_UART0_IRQ);
-#if defined(CONFIG_RTL_819XD)
- else if (pending & BSP_UART1_IP)
- do_IRQ(BSP_UART1_IRQ);
-#endif
- else if (pending & BSP_TC1_IP)
- do_IRQ(BSP_TC1_IRQ);
-#if defined(CONFIG_RTL_819XD)
- #if CONFIG_RTL_USB_OTG //wei add
- #if (BSP_OTG_IRQ >= BSP_IRQ_ICTL_BASE) // double check otg is ictl not lopi
- else if (pending & BSP_OTG_IP)
- do_IRQ(BSP_OTG_IRQ);
- #endif
- #endif
- #if defined( CONFIG_RTK_VOIP ) || defined(CONFIG_PCIE_POWER_SAVING)
- else if (pending & BSP_GPIO_ABCD_IP)
- do_IRQ(BSP_GPIO_ABCD_IRQ);
- else if (pending & BSP_GPIO_EFGH_IP)
- do_IRQ(BSP_GPIO_EFGH_IRQ);
-
- else if (pending & BSP_GPIO_ABCD_IP)
- do_IRQ(BSP_GPIO_ABCD_IRQ);
- #endif
-#endif
- else {
- REG32(BSP_GIMR) &= (~pending);
-#if defined(CONFIG_RTL_819XD)
- REG32(BSP_GISR) = REG32(BSP_GISR);
-#endif
- printk("Unknown Interrupt0:%x\n", pending);
- #if defined(CONFIG_RTK_VOIP) || defined(CONFIG_RTL_819X)
- spurious_interrupt(SPURIOS_INT_CASCADE);
- #else
- spurious_interrupt();
- #endif
- }
-}
-
-void bsp_irq_dispatch(void)
-{
- volatile unsigned int pending;
- pending = read_c0_cause() & read_c0_status();
-
- if (pending & CAUSEF_IP2)
- bsp_ictl_irq_dispatch();
- else if (pending & CAUSEF_IP0)
- do_IRQ(0);
- else if (pending & CAUSEF_IP1)
- do_IRQ(1);
- else {
-#if defined(CONFIG_RTK_VOIP) || defined(CONFIG_RTL_819X)
- spurious_interrupt(SPURIOS_INT_CPU);
-#else
- spurious_interrupt();
-#endif
- }
-}
-
-static void __init bsp_ictl_irq_init(unsigned int irq_base)
-{
- int i;
-
- for (i=0; i < BSP_IRQ_ICTL_NUM; i++)
- set_irq_chip_and_handler(irq_base + i, &bsp_ictl_irq, handle_level_irq);
-
- setup_irq(BSP_ICTL_IRQ, &irq_cascade);
-}
-
-#ifdef CONFIG_RTL_8198_NFBI_BOARD
-extern void (*flush_icache_range)(unsigned long start, unsigned long end);
-
-int get_dram_type(void)
-{
- // read hw_strap register
- if (REG32(0xb8000008) & 0x2) //bit 1
- return 1; //DDR
- else
- return 0; //SDR
-}
-
-void setup_reboot_addr(unsigned long addr)
-{
- unsigned int dramcode[20]={
- 0x3c080f0a, // lui t0,0f0a
- 0x3508dfff, // ori t0,t0,0xdfff
- 0x3c09b800, // lui t1,0xb800
- 0x35290048, // ori t1,t1,0x0048
- 0xad280000, // sw t0,0(t1)
-
- 0x3c0801FF, // lui t0,01FF
- 0x3508FF8A, // ori t0,t0,0xFF8A
- 0x3c09b800, // lui t1,0xb800
- 0x35290010, // ori t1,t1,0x0010
- 0xad280000, // sw t0,0(t1)
-
- 0x3c086cea, // lui t0,0x6cea
- 0x35080a80, // ori t0,t0,0x0a80
- 0x3c09b800, // lui t1,0xb800
- 0x35291008, // ori t1,t1,0x1008
- 0xad280000, // sw t0,0(t1)
-
- 0x3c085208, // lui t0,0x5208 //8MB DRAM
- 0x35080000, // ori t0,t0,0x0000
- 0x3c09b800, // lui t1,0xb800
- 0x35291004, // ori t1,t1,0x1004
- 0xad280000, // sw t0,0(t1)
- };
- unsigned int jmpcode[4]={
- 0x3c1aa070, // lui k0,0xa070
- 0x375a0000, // ori k0,k0,0x0000
- 0x03400008, // jr k0
- 0x0 // nop
- };
- int i, offset;
-
- // setting DCR and DTR register
- dramcode[10]=(dramcode[10] &0xffff0000) | 0xffff;
- dramcode[11]=(dramcode[11] &0xffff0000) | 0x05c0;
- //if (check_ddr_tmp_file())
- if (get_dram_type()) { //DDR
- dramcode[15]=(dramcode[15] &0xffff0000) | 0x5448; //DDR, 32M
- //8198:1.set bigger current for DDR
- dramcode[0]=(dramcode[0] &0xffff0000) | 0x0b0a;
- // TX RX delay
- dramcode[5]=(dramcode[5] &0xffff0000) | 0x01ff;
- dramcode[6]=(dramcode[6] &0xffff0000) | 0xfc70;
- }
- else {
- dramcode[15]=(dramcode[15] &0xffff0000) | 0x5208; //SDR, 8M
- //8198:1.set bigger current for DDR
- dramcode[0]=(dramcode[0] &0xffff0000) | 0x0f0a;
- // TX RX delay
- dramcode[5]=(dramcode[5] &0xffff0000) | 0x01ff;
- dramcode[6]=(dramcode[6] &0xffff0000) | 0xff8a;
- }
- dramcode[16]=(dramcode[16] &0xffff0000) | 0x0000;
-
- for (i=0, offset=0; i<20; i++, offset++)
- *(volatile u32 *)(KSEG0 + 0x8000 + offset*4) = dramcode[i];
-
- // set jump command
- jmpcode[0] = (jmpcode[0]&0xffff0000) | ((addr>>16)&0xffff);
- jmpcode[1] = (jmpcode[1]&0xffff0000) | (addr&0xffff);
-
- for (i=0; i<4; i++, offset++)
- *(volatile u32 *)(KSEG0 + 0x8000 + offset*4) = jmpcode[i];
-
- flush_icache_range(KSEG0+0x8000, KSEG0 + offset*4);
-}
-#endif //CONFIG_RTL_8198_NFBI_BOARD
-
-
-void __init bsp_irq_init(void)
-{
- //unsigned int status;
- //volatile unsigned int status;
- /* disable ict interrupt */
- REG32(BSP_GIMR) = 0;
-
- /* initialize IRQ action handlers */
- rlx_cpu_irq_init(BSP_IRQ_CPU_BASE);
- rlx_vec_irq_init(BSP_IRQ_LOPI_BASE);
- bsp_ictl_irq_init(BSP_IRQ_ICTL_BASE);
-
- /* Set IRR */
- REG32(BSP_IRR0) = BSP_IRR0_SETTING;
- REG32(BSP_IRR1) = BSP_IRR1_SETTING;
- REG32(BSP_IRR2) = BSP_IRR2_SETTING;
- REG32(BSP_IRR3) = BSP_IRR3_SETTING;
-
- //status = read_c0_status();
- //status = (status&(~ST0_IM))|(CAUSEF_IP2|CAUSEF_IP3|CAUSEF_IP4|CAUSEF_IP5|CAUSEF_IP6);
- //write_c0_status(status);
-#ifdef CONFIG_USB
- REG32(BSP_GIMR) |= BSP_USB_H_IE;
-#endif
-
-#ifdef CONFIG_DWC_OTG //wei add
- REG32(BSP_GIMR) |= BSP_OTG_IE; //mac
-#endif
-}
-
-#if defined(CONFIG_ARCH_SUSPEND_POSSIBLE)//michaelxxx
- #define CONFIG_RTL819X_SUSPEND_CHECK_INTERRUPT
- #ifdef CONFIG_RTL819X_SUSPEND_CHECK_INTERRUPT
- #include <linux/proc_fs.h>
- #include <linux/kernel_stat.h>
- #include <asm/uaccess.h>
- //#define INT_HIGH_WATER_MARK 1850 //for window size = 1, based on LAN->WAN test result
- //#define INT_LOW_WATER_MARK 1150
- //#define INT_HIGH_WATER_MARK 9190 //for window size = 5, based on LAN->WAN test result
- //#define INT_LOW_WATER_MARK 5500
- #define INT_HIGH_WATER_MARK 3200 //for window size = 5, based on WLAN->WAN test result
- #define INT_LOW_WATER_MARK 2200
- #define INT_WINDOW_SIZE_MAX 10
- static int suspend_check_enable = 1;
- static int suspend_check_high_water_mark = INT_HIGH_WATER_MARK;
- static int suspend_check_low_water_mark = INT_LOW_WATER_MARK;
- static int suspend_check_win_size = 5;
- static struct timer_list suspend_check_timer;
- static int index=0, prev_count=0;
- static int eth_int_count[INT_WINDOW_SIZE_MAX];
- static int wlan_int_count[INT_WINDOW_SIZE_MAX];
- int cpu_can_suspend = 1;
- int cpu_can_suspend_check_init = 0;
-
- static int read_proc_suspend_check(char *page, char **start, off_t off,
- int count, int *eof, void *data)
- {
- int len;
-
- len = sprintf(page, "enable=%d, winsize=%d(%d), high=%d, low=%d, suspend=%d, prev_count=%d\n",
- suspend_check_enable, suspend_check_win_size, INT_WINDOW_SIZE_MAX,
- suspend_check_high_water_mark, suspend_check_low_water_mark, cpu_can_suspend, prev_count);
-
- if (len <= off+count)
- *eof = 1;
- *start = page + off;
- len -= off;
- if (len > count)
- len = count;
- if (len < 0)
- len = 0;
- return len;
- }
-
- static int write_proc_suspend_check(struct file *file, const char *buffer,
- unsigned long count, void *data)
- {
- char tmp[128];
-
- if (buffer && !copy_from_user(tmp, buffer, 128)) {
- sscanf(tmp, "%d %d %d %d %d",
- &suspend_check_enable, &suspend_check_win_size,
- &suspend_check_high_water_mark, &suspend_check_low_water_mark, &cpu_can_suspend);
- if (suspend_check_win_size >= INT_WINDOW_SIZE_MAX)
- suspend_check_win_size = INT_WINDOW_SIZE_MAX - 1;
- if (suspend_check_enable) {
- mod_timer(&suspend_check_timer, jiffies + 100);
- }
- else {
- del_timer(&suspend_check_timer);
- }
- }
- return count;
- }
-
- static void suspend_check_timer_fn(unsigned long arg)
- {
- int count, j;
-
- index++;
- if (INT_WINDOW_SIZE_MAX <= index)
- index = 0;
- eth_int_count[index] = kstat_irqs(BSP_SWCORE_IRQ);
- wlan_int_count[index] = kstat_irqs(BSP_PCIE_IRQ);
- j = index - suspend_check_win_size;
- if (j < 0)
- j += INT_WINDOW_SIZE_MAX;
- count = (eth_int_count[index] - eth_int_count[j]) +
- (wlan_int_count[index]- wlan_int_count[j]); //unit: number of interrupt occurred
-
- prev_count = count;
-
- if (cpu_can_suspend) {
- if (count > suspend_check_high_water_mark) {
- cpu_can_suspend = 0;
- //printk("\n<<<RTL8196C LEAVE SLEEP>>>\n"); /* for Debug Only*/
- }
- }
- else {
- if (count < suspend_check_low_water_mark) {
- cpu_can_suspend = 1;
- //printk("\n<<<RTL8196C ENTER SLEEP>>>\n"); /* for Debug Only*/
- }
- }
-#if 0 /* for Debug Only*/
- printk("###index=%d, count=%d (%d+%d) suspend=%d###\n",index, count,
- eth_int_count[index] - eth_int_count[j]),
- (wlan_int_count[index]- wlan_int_count[j]),
- cpu_can_suspend);
-#endif
- mod_timer(&suspend_check_timer, jiffies + 100);
- }
-
- void suspend_check_interrupt_init(void)
- {
- struct proc_dir_entry *res;
- int i;
-
- res = create_proc_entry("suspend_check", 0, NULL);
- if (res) {
- res->read_proc = read_proc_suspend_check;
- res->write_proc = write_proc_suspend_check;
- }
- else {
- printk("unable to create /proc/suspend_check\n");
- }
-
- for (i=0; i<INT_WINDOW_SIZE_MAX; i++) {
- wlan_int_count[i] = 0;
- eth_int_count[i] = 0;
- }
- init_timer(&suspend_check_timer);
- suspend_check_timer.data = 0;
- suspend_check_timer.function = suspend_check_timer_fn;
- suspend_check_timer.expires = jiffies + 100; /* in jiffies */
- add_timer(&suspend_check_timer);
- }
-#endif // CONFIG_RTL819X_SUSPEND_CHECK_INTERRUPT
-#endif //CONFIG_ARCH_SUSPEND_POSSIBLE
-
diff --git a/target/linux/realtek/files/arch/rlx/bsp/kgdb.c b/target/linux/realtek/files/arch/rlx/bsp/kgdb.c
deleted file mode 100644
index 93960b21f..000000000
--- a/target/linux/realtek/files/arch/rlx/bsp/kgdb.c
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * Realtek semiconductor Corp.
- *
- * arch/rlx/rlxocp/kgdb.c:
- * Kernel debugging on the rtl5739.
- *
- * Tony Wu (tonywu@realtek.com.tw)
- * Dec. 7, 2007
- */
-#include <asm/system.h>
-#include <asm/tx3912.h>
-
-static int remoteDebugInitialized = 0;
-
-void debugInit(void)
-{
-/*
- * If low-level debugging (before GDB or console operational) is
- * configured, then we do not need to re-initialize the UART.
- */
-#ifndef CONFIG_DEBUG_LL
-// earlyInitUartPR31700();
-#endif
-}
-
-char getDebugChar(void)
-{
- char buf;
- unsigned long int2, flags;
-
- if (!remoteDebugInitialized) {
- debugInit();
- remoteDebugInitialized = 1;
- }
-
- save_and_cli(flags);
-
- int2 = IntEnable2;
-
- IntEnable2 = 0;
-
- while (!(UartA_Ctrl1 & UART_RX_HOLD_FULL));
-
- buf = UartA_Data;
-
- IntEnable2 = int2;
-
- restore_flags(flags);
-
- return buf;
-}
-
-int putDebugChar(char c)
-{
- int i;
- unsigned long int2;
-
- if (!remoteDebugInitialized) {
- debugInit();
- remoteDebugInitialized = 1;
- }
-
- int2 = IntEnable2;
-
- IntEnable2 &=
- ~(INT2_UARTATXINT | INT2_UARTATXOVERRUN | INT2_UARTAEMPTY);
-
- for (i = 0; !(IntStatus2 & INT2_UARTATXINT) && (i < 10000); i++);
-
- IntClear2 = INT2_UARTATXINT | INT2_UARTATXOVERRUN | INT2_UARTAEMPTY;
-
- UartA_Data = c;
-
- for (i = 0; !(IntStatus2 & INT2_UARTATXINT) && (i < 10000); i++);
-
- IntClear2 = INT2_UARTATXINT | INT2_UARTATXOVERRUN | INT2_UARTAEMPTY;
-
- IntEnable2 = int2;
-
- return 1;
-}
diff --git a/target/linux/realtek/files/arch/rlx/bsp/pci.c b/target/linux/realtek/files/arch/rlx/bsp/pci.c
deleted file mode 100644
index 147f743cb..000000000
--- a/target/linux/realtek/files/arch/rlx/bsp/pci.c
+++ /dev/null
@@ -1,1265 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * RTL819XX PCIE Host Controller Glue Driver
- * Copyright (C) 2006, Realtek Semiconductor Corp.
- * Author: (ghhuang@realtek.com.tw)
- *
- * Copyright (C) 2013, Artur Artamonov (artur@advem.lv)
- *
- * Notes:
- * - Two host controllers available.
- * - Each host direcly connects to one device
- * - Supports PCI devices through PCIE-to-PCI bridges
- * - If no PCI devices are connected to RC. Timeout monitor shall be
- * enabled to prevent bus hanging.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-//#include <asm/rlxregs.h>
-#include "bspchip.h"
-
-#define PCI_8BIT_ACCESS 1
-#define PCI_16BIT_ACCESS 2
-#define PCI_32BIT_ACCESS 4
-#define PCI_ACCESS_READ 8
-#define PCI_ACCESS_WRITE 16
-
-#define MAX_NUM_DEV 4
-
-#define DEBUG_PRINTK 0
-
-#define CLK_MANAGE 0xb8000010
-#define SYS_PCIE_PHY0 (0xb8000000 +0x50)
-#define SYS_PCIE_PHY1 (0xb8000000 +0x54)
-#define PCIE_PHY0 0xb8b01008
-#define PCIE_PHY1 0xb8b21008
-//best define ever
-#define PIN_208 1
-
-#define MAX_PAYLOAD_SIZE_128B 0
-
-static int pci0_bus_number = 0xff;
-static int pci1_bus_number = 0xff;
-
-
-
-static struct resource rtl8196c_pci0_io_resource = {
- .name = "RTL8196C PCI0 IO",
- .flags = IORESOURCE_IO,
- .start = PADDR(BSP_PCIE0_D_IO),
- .end = PADDR(BSP_PCIE0_D_IO + 0x1FFFFF)
-};
-
-static struct resource rtl8196c_pci0_mem_resource = {
- .name = "RTL8196C PCI0 MEM",
- .flags = IORESOURCE_MEM,
- .start = PADDR(BSP_PCIE0_D_MEM),
- .end = PADDR(BSP_PCIE0_D_MEM + 0xFFFFFF)
-};
-
-static struct resource rtl8196d_pci0_io_resource = {
- .name = "RTL8196D PCI0 IO",
- .flags = IORESOURCE_IO,
- .start = PADDR(BSP_PCIE0_D_IO),
- .end = PADDR(BSP_PCIE0_D_IO + 0x1FFFFF)
-};
-
-static struct resource rtl8196d_pci0_mem_resource = {
- .name = "RTL8196D PCI0 MEM",
- .flags = IORESOURCE_MEM,
- .start = PADDR(BSP_PCIE0_D_MEM),
- .end = PADDR(BSP_PCIE0_D_MEM + 0xFFFFFF)
-};
-
-static struct resource rtl8196b_pci1_io_resource = {
- .name = "RTL8196B PCI1 IO",
- .flags = IORESOURCE_IO,
- .start = PADDR(BSP_PCIE1_D_IO),
- .end = PADDR(BSP_PCIE1_D_IO + 0x1FFFFF)
-};
-
-static struct resource rtl8196b_pci1_mem_resource = {
- .name = "RTL8196B PCI1 MEM",
- .flags = IORESOURCE_MEM,
- .start = PADDR(BSP_PCIE1_D_MEM),
- .end = PADDR(BSP_PCIE1_D_MEM + 0xFFFFFF)
-};
-
-
-#if defined(CONFIG_RTL_8196C)
-static struct resource rtl8196b_pci0_io_resource = resource rtl8196c_pci0_io_resource;
-static struct resource rtl8196b_pci0_mem_resource = resource rtl8196c_pci0_mem_resource;
-#elif defined(CONFIG_RTL_819XD)
-static struct resource rtl8196b_pci0_io_resource = resource rtl8196d_pci0_io_resource;
-static struct resource rtl8196b_pci0_mem_resource = resource rtl8196d_pci0_mem_resource;
-#endif
-
-//HOST PCIE
-#define PCIE0_RC_EXT_BASE (0xb8b01000)
-#define PCIE1_RC_EXT_BASE (0xb8b21000)
-
-//RC Extended register
-#define PCIE0_MDIO (PCIE0_RC_EXT_BASE+0x00)
-#define PCIE1_MDIO (PCIE1_RC_EXT_BASE+0x00)
-
-//MDIO
-#define PCIE_MDIO_DATA_OFFSET (16)
-#define PCIE_MDIO_DATA_MASK (0xffff <<PCIE_MDIO_DATA_OFFSET)
-#define PCIE_MDIO_REG_OFFSET (8)
-#define PCIE_MDIO_RDWR_OFFSET (0)
-
-int at2_mode=0;
-
-//------------------------------------------------------------------------
-unsigned int HostPCIe_SetPhyMdioRead(unsigned int portnum, unsigned int regaddr)
-{
- unsigned int mdioaddr=PCIE0_MDIO;
-/*
- if(portnum==0) mdioaddr=PCIE0_MDIO;
- else if(portnum==1) mdioaddr=PCIE1_MDIO;
- else return 0;
-*/
- REG32(mdioaddr)= ((regaddr&0x1f)<<PCIE_MDIO_REG_OFFSET) | (0<<PCIE_MDIO_RDWR_OFFSET);
- //delay
- volatile int i;
- for(i=0;i<5555;i++) ;
-
- int val;
- val=REG32(mdioaddr)& (0xffff <<PCIE_MDIO_DATA_OFFSET) ;
- return ((val>>PCIE_MDIO_DATA_OFFSET)&0xffff);
-
-}
-
-
-void HostPCIe_SetPhyMdioWrite(unsigned int portnum, unsigned int regaddr, unsigned short val)
-{
- unsigned int mdioaddr;
-
- if(portnum==0) mdioaddr=PCIE0_MDIO;
- else if(portnum==1) mdioaddr=PCIE1_MDIO;
- else return 0;
-
- REG32(mdioaddr)= ( (regaddr&0x1f)<<PCIE_MDIO_REG_OFFSET) | ((val&0xffff)<<PCIE_MDIO_DATA_OFFSET) | (1<<PCIE_MDIO_RDWR_OFFSET) ;
- //delay
- volatile int i;
- for(i=0;i<5555;i++) ;
-}
-
-//----------------------------------------------------------------------------
-
-void PCIE_MDIO_Reset(unsigned int portnum)
-{
- #define SYS_PCIE_PHY0 (0xb8000000 +0x50)
- #define SYS_PCIE_PHY1 (0xb8000000 +0x54)
- unsigned int sys_pcie_phy;
-
- if (portnum==0)
- sys_pcie_phy=SYS_PCIE_PHY0;
- else if (portnum==1)
- sys_pcie_phy=SYS_PCIE_PHY1;
- else
- return;
-
- // 3.MDIO Reset
- REG32(sys_pcie_phy) = (1<<3) |(0<<1) | (0<<0); //mdio reset=0,
- REG32(sys_pcie_phy) = (1<<3) |(0<<1) | (1<<0); //mdio reset=1,
- REG32(sys_pcie_phy) = (1<<3) |(1<<1) | (1<<0); //bit1 load_done=1
-}
-//------------------------------------------------------------------------
-void PCIE_PHY_Reset(unsigned int portnum)
-{
- #define PCIE_PHY0 0xb8b01008
- #define PCIE_PHY1 0xb8b21008
- unsigned int pcie_phy;
-
- if(portnum==0) pcie_phy=PCIE_PHY0;
- else if(portnum==1) pcie_phy=PCIE_PHY1;
- else return;
-
- //4. PCIE PHY Reset
- REG32(pcie_phy) = 0x01; //bit7:PHY reset=0 bit0: Enable LTSSM=1
- REG32(pcie_phy) = 0x81; //bit7: PHY reset=1 bit0: Enable LTSSM=1
-
-}
-//------------------------------------------------------------------------
-int PCIE_Check_Link(unsigned int portnum)
-{
- unsigned int dbgaddr;
- unsigned int cfgaddr;
-
- if(portnum==0) dbgaddr=0xb8b00728;
- else if(portnum==1) dbgaddr=0xb8b20728;
- else return;
-
- //wait for LinkUP
-#ifdef CONFIG_RTK_VOIP
- // accelerate when no pcie card
- int i=3;
-#else
- int i=20;
-#endif
- while(--i)
- {
- if( (REG32(dbgaddr)&0x1f)==0x11)
- break;
- mdelay(300);
-
- }
- if(i==0)
- {
- printk("i=%x Cannot LinkUP \n",i);
- return 0;
- }
- else
- {
- printk("\nLink-UP OK\n");
- if(portnum==0)
- cfgaddr=0xb8b10000;
- else if(portnum==1)
- cfgaddr=0xb8b30000;
-
-
- REG32(cfgaddr+0x04)=0x00100007;
-
- printk("Find Port=%x Device:Vender ID=%x\n", portnum, REG32(cfgaddr) );
- REG32(cfgaddr);
- mdelay(1);
-
- #if defined(CONFIG_RTL_819XD)
- if (portnum == 0)
- REG32(BSP_GIMR) |= BSP_PCIE_IE;
- else
- REG32(BSP_GIMR) |= BSP_PCIE2_IE;
- #endif
- }
- return 1;
-}
-//------------------------------------------------------------------------
-/*
-void PCIE_Device_PERST(void)
-{
- REG32(CLK_MANAGE) &= ~(1<<12); //perst=0 off.
- mdelay(500); //PCIE standadrd: poweron: 100us, after poweron: 100ms
- mdelay(500);
- REG32(CLK_MANAGE) |= (1<<12); //PERST=1
- mdelay(500);
-}
-*/
-
-static void PCIE_Device_PERST(int portnum)
-{
- #define CLK_MANAGE 0xb8000010
- #define GPIO_BASE 0xB8003500
- #define PEFGHCNR_REG (0x01C + GPIO_BASE) /* Port EFGH control */
- #define PEFGHPTYPE_REG (0x020 + GPIO_BASE) /* Port EFGH type */
- #define PEFGHDIR_REG (0x024 + GPIO_BASE) /* Port EFGH direction */
- #define PEFGHDAT_REG (0x028 + GPIO_BASE) /* Port EFGH data */
- if (portnum==0)
- {
- REG32(CLK_MANAGE) &= ~(1<<26); //perst=0 off.
- mdelay(500); //PCIE standadrd: poweron: 100us, after poweron: 100ms
- mdelay(500);
- REG32(CLK_MANAGE) |= (1<<26); //PERST=1
- }
- else if (portnum==1)
- {
- /* PCIE Device Reset
- * The pcei1 slot reset register depends on the hw
- */
-#if 1//defined(CONFIG_RTL_DUAL_PCIESLOT_BIWLAN) || (RTL_USED_PCIE_SLOT==1) || defined(CONFIG_RTL_DUAL_PCIESLOT_BIWLAN_D)
- REG32(PEFGHDAT_REG) &= ~(0x1000); //perst=0 off.
- mdelay(300); //PCIE standadrd: poweron: 100us, after poweron: 100ms
- mdelay(300);
- REG32(PEFGHDAT_REG) |= (0x1000); //PERST=1
-#elif defined(CONFIG_RTL_92D_SUPPORT)
- REG32(CLK_MANAGE) &= ~(1<<26); //perst=0 off.
- mdelay(500); //PCIE standadrd: poweron: 100us, after poweron: 100ms
- mdelay(500);
- REG32(CLK_MANAGE) |= (1<<26); //PERST=1
-#endif
- }
- else
- return;
-}
-
-//------------------------------------------------------------------------
-
-int OnlyOneReset()
-{
-
- int result=0;
- int portnum=0;
- printk("PCIE RESET Only Once\n");
-
-
- #define CLK_MANAGE 0xb8000010
-#ifdef CONFIG_RTL_819XD
- REG32(CLK_MANAGE)|= (1<<12)|(1<<13)|(1<<19)|(1<<20)|(1<<18)|(1<<16);
-#endif
- REG32(CLK_MANAGE) &= (~(1<<14)); //disable active_pcie0
- REG32(CLK_MANAGE) |= (1<<14); //enable active_pcie0
-
- #define PAD_CONTROL 0xb8000048
- REG32(PAD_CONTROL)|=(1<<27); //switch to rc
- REG32(CLK_MANAGE) &= (~(1<<16)); //disable active_pcie1
- REG32(CLK_MANAGE) |= (1<<16); //enable active_pcie1
-
- //PERST=1
- //REG32(CLK_MANAGE) |= (1<<26);
- //PCIE_Device_PERST(0);
-
-
-
- for(portnum=0; portnum<2; portnum++)
- PCIE_MDIO_Reset(portnum);
- mdelay(500);
-
- for(portnum=0; portnum<2; portnum++)
- {
- #if 1//def RTL8198_FORMALCHIP_A
- HostPCIe_SetPhyMdioWrite(portnum, 0, 0xD087); //bokai tell, and fix
-
- HostPCIe_SetPhyMdioWrite(portnum, 1, 0x0003);
- HostPCIe_SetPhyMdioWrite(portnum, 2, 0x4d18);
- #ifdef CONFIG_PHY_EAT_40MHZ
- HostPCIe_SetPhyMdioWrite(portnum, 5, 0x0BCB); //40M
- #endif
-
- #ifdef CONFIG_PHY_EAT_40MHZ
- HostPCIe_SetPhyMdioWrite(portnum, 6, 0xF148); //40M
- #else
- HostPCIe_SetPhyMdioWrite(portnum, 6, 0xf848); //25M
- #endif
-
- HostPCIe_SetPhyMdioWrite(portnum, 7, 0x31ff);
-
- #ifdef CONFIG_RTL_819XD
- HostPCIe_SetPhyMdioWrite(portnum, 8, 0x18d6); //peisi tune
- #else
- HostPCIe_SetPhyMdioWrite(portnum, 8, 0x18d7); //peisi tune
- #endif
- HostPCIe_SetPhyMdioWrite(portnum, 0x09, 0x539c);
- HostPCIe_SetPhyMdioWrite(portnum, 0x0a, 0x20eb);
- HostPCIe_SetPhyMdioWrite(portnum, 0x0d, 0x1766);
- //HostPCIe_SetPhyMdioWrite(portnum, 0x0d, 0x1464); //wei add
-
- HostPCIe_SetPhyMdioWrite(portnum, 0x0b, 0x0511); //for sloving low performance
-
-
- HostPCIe_SetPhyMdioWrite(portnum, 0xf, 0x0a00);
- HostPCIe_SetPhyMdioWrite(portnum, 0x19, 0xFCE0);
-
- HostPCIe_SetPhyMdioWrite(portnum, 0x1a, 0x7e40); //formal chip, reg 0x1a.4=0
- HostPCIe_SetPhyMdioWrite(portnum, 0x1b, 0xFC01); //formal chip reg 0x1b.0=1
-
- HostPCIe_SetPhyMdioWrite(portnum, 0x1e, 0xC280);
-
- #endif
- }
-
- PCIE_Device_PERST(0);
- mdelay(500);
- for(portnum=0; portnum<2; portnum++)
- PCIE_PHY_Reset(portnum);
-
- mdelay(500);
- mdelay(500);
- mdelay(500);
-
-
- for(portnum=0; portnum<2; portnum++)
- { result=PCIE_Check_Link(portnum);
- if(result!=1)
- continue;
-
-
- #if 1 //wei add patch
-
- //add compatible, slove sata pcie card.
- if(portnum==0) REG32(0xb8b0100c)=(1<<3); //set target Device Num=1;
- if(portnum==1) REG32(0xb8b2100c)=(2<<3); //set target Device Num=1;
-
- unsigned int rc_cfg, cfgaddr;
- unsigned int iomapaddr;
- unsigned int memmapaddr;
-
-#define PCIE0_RC_CFG_BASE (0xb8b00000)
-#define PCIE0_RC_EXT_BASE (PCIE0_RC_CFG_BASE + 0x1000)
-#define PCIE0_EP_CFG_BASE (0xb8b10000)
-
-#define PCIE1_RC_CFG_BASE (0xb8b20000)
-#define PCIE1_RC_EXT_BASE (PCIE1_RC_CFG_BASE + 0x1000)
-#define PCIE1_EP_CFG_BASE (0xb8b30000)
-
-
-#define PCIE0_MAP_IO_BASE (0xb8c00000)
-#define PCIE0_MAP_MEM_BASE (0xb9000000)
-
-#define PCIE1_MAP_IO_BASE (0xb8e00000)
-#define PCIE1_MAP_MEM_BASE (0xba000000)
-
-#define MAX_READ_REQSIZE_128B 0x00
-#define MAX_READ_REQSIZE_256B 0x10
-#define MAX_READ_REQSIZE_512B 0x20
-#define MAX_READ_REQSIZE_1KB 0x30
-#define MAX_READ_REQSIZE_2KB 0x40
-#define MAX_READ_REQSIZE_4KB 0x50
-
-#define MAX_PAYLOAD_SIZE_128B 0x00
-#define MAX_PAYLOAD_SIZE_256B 0x20
-#define MAX_PAYLOAD_SIZE_512B 0x40
-#define MAX_PAYLOAD_SIZE_1KB 0x60
-#define MAX_PAYLOAD_SIZE_2KB 0x80
-#define MAX_PAYLOAD_SIZE_4KB 0xA0
-
- if(portnum==0)
- { rc_cfg=PCIE0_RC_CFG_BASE;
- cfgaddr=PCIE0_EP_CFG_BASE;
- iomapaddr=PCIE0_MAP_IO_BASE;
- memmapaddr=PCIE0_MAP_MEM_BASE;
- }
- else if(portnum==1)
- { rc_cfg=PCIE1_RC_CFG_BASE;
- cfgaddr=PCIE1_EP_CFG_BASE;
- iomapaddr=PCIE1_MAP_IO_BASE;
- memmapaddr=PCIE1_MAP_MEM_BASE;
- }
- //STATUS
- //bit 4: capabilties List
-
- //CMD
- //bit 2: Enable Bys master,
- //bit 1: enable memmap,
- //bit 0: enable iomap
- REG32(rc_cfg + 0x04)= 0x00100007;
-
- //Device Control Register
- //bit [7-5] payload size
- REG32(rc_cfg + 0x78)= (REG32(rc_cfg + 0x78 ) & (~0xE0)) | MAX_PAYLOAD_SIZE_128B; // Set MAX_PAYLOAD_SIZE to 128B,default
- REG32(cfgaddr + 0x04)= 0x00100007; //0x00180007
-
- //bit 0: 0:memory, 1 io indicate
- //REG32(cfgaddr + 0x10)= (iomapaddr | 0x00000001) & 0x1FFFFFFF; // Set BAR0
-
- //bit 3: prefetch
- //bit [2:1] 00:32bit, 01:reserved, 10:64bit 11:reserved
- //REG32(cfgaddr + 0x18)= (memmapaddr | 0x00000004) & 0x1FFFFFFF; // Set BAR1
-
- //offset 0x78 [7:5]
- REG32(cfgaddr + 0x78) = (REG32(cfgaddr + 0x78) & (~0xE0)) | (MAX_PAYLOAD_SIZE_128B); // Set MAX_PAYLOAD_SIZE to 128B
-
- //offset 0x79: [6:4]
- REG32(cfgaddr + 0x78) = (REG32(cfgaddr + 0x78) & (~0x7000)) | (MAX_READ_REQSIZE_256B<<8); // Set MAX_REQ_SIZE to 256B,default
-
- //io and mem limit, setting to no litmit
- REG32(rc_cfg+ 0x1c) = (2<<4) | (0<<12); // [7:4]=base [15:12]=limit
- REG32(rc_cfg+ 0x20) = (2<<4) | (0<<20); // [15:4]=base [31:20]=limit
- REG32(rc_cfg+ 0x24) = (2<<4) | (0<<20); // [15:4]=base [31:20]=limit
-#endif
- }
-
- return 1;
-
-}
-
-//----------------------------------------------------------------------
-//======================================================================
-//please rewrite me/ here is a lot of ...
-#if defined(CONFIG_RTL_8196C)
-int PCIE_reset_procedure(int portnum, int Use_External_PCIE_CLK, int mdio_reset)
-{
- #define CLK_MANAGE 0xb8000010
- int result;
-
- REG32(CLK_MANAGE) |= (1<<11); //enable active_pcie0
-
- mdelay(10);
- REG32(0xb8b0100c)=(1<<3); //set target Device Num=1;
- mdelay(10);
-
- if (mdio_reset) {
- printk("Do MDIO_RESET\n");
- // 3.MDIO Reset
- PCIE_MDIO_Reset(portnum);
- mdelay(10);
- }
- //4. PCIE PHY Reset
- PCIE_PHY_Reset(portnum);
- mdelay(10);
- mdelay(10);
-
- //----------------------------------------
- if (mdio_reset) {
- HostPCIe_SetPhyMdioWrite(portnum, 0, 0xD087); //bokai tell, and fix
-
- HostPCIe_SetPhyMdioWrite(portnum, 1, 0x0003);
- HostPCIe_SetPhyMdioWrite(portnum, 2, 0x4d18);
-#ifdef CONFIG_PHY_EAT_40MHZ
-#ifdef CONFIG_HIGH_POWER_EXT_PA
- HostPCIe_SetPhyMdioWrite(portnum, 5, 0x0BF3); //40M
-#else
- HostPCIe_SetPhyMdioWrite(portnum, 5, 0x0BCB); //40M
-#endif
-#endif
-
-#ifdef CONFIG_PHY_EAT_40MHZ
- HostPCIe_SetPhyMdioWrite(portnum, 6, 0xF148); //40M
-#else
- HostPCIe_SetPhyMdioWrite(portnum, 6, 0xf848); //25M
-#endif
-
- HostPCIe_SetPhyMdioWrite(portnum, 7, 0x31ff);
- HostPCIe_SetPhyMdioWrite(portnum, 8, 0x18d7); //peisi tune
-
-#if 0 //old,
- HostPCIe_SetPhyMdioWrite(portnum, 9, 0x531c);
- HostPCIe_SetPhyMdioWrite(portnum, 0xd, 0x1766); //peisi tune
-#else //saving more power, 8196c pe-si tune
- HostPCIe_SetPhyMdioWrite(portnum, 0x09, 0x539c);
- HostPCIe_SetPhyMdioWrite(portnum, 0x0a, 0x20eb);
- HostPCIe_SetPhyMdioWrite(portnum, 0x0d, 0x1764);
-#endif
- HostPCIe_SetPhyMdioWrite(portnum, 0x0b, 0x0511); //for sloving low performance
-
- HostPCIe_SetPhyMdioWrite(portnum, 0xf, 0x0a00);
- HostPCIe_SetPhyMdioWrite(portnum, 0x19, 0xFCE0);
-
- HostPCIe_SetPhyMdioWrite(portnum, 0x1e, 0xC280);
- }
-
- //---------------------------------------
- PCIE_Device_PERST();
-
- PCIE_PHY_Reset(portnum);
- mdelay(500);
- REG32(0xb8b00000 + 0x04)= 0x00100007;
- REG8(0xb8b00000 + 0x78)=((REG8(0xb8b00000 + 0x78) & (~0xE0)) | MAX_PAYLOAD_SIZE_128B);
- mdelay(500);
- result=PCIE_Check_Link(portnum);
- return result;
-}
-#elif defined(CONFIG_RTL_819XD)
-int PCIE_reset_procedure(int portnum, int Use_External_PCIE_CLK, int mdio_reset)
-{
- // dprintf("port=%x, mdio_rst=%x \n", portnum, mdio_reset);
- int result=0;
-
- //first, Turn On PCIE IP
- #define CLK_MANAGE 0xb8000010
- if(portnum==0) REG32(CLK_MANAGE) |= (1<<14); //enable active_pcie0
- else if(portnum==1) REG32(CLK_MANAGE) |= (1<<16); //enable active_pcie1
- else return result;
- if (portnum==0)
- {
- REG32(CLK_MANAGE) |= (1<<26); //PERST=1
- }
- else if (portnum==1)
- {
- REG32(0xb8000040)|=0x300;
- REG32(PEFGHCNR_REG) &= ~(0x1000); /*port F bit 4 */
- REG32(PEFGHDIR_REG) |= (0x1000); /*port F bit 4 */
- REG32(PEFGHDAT_REG) |= (0x1000); //PERST=1
- }
-#ifdef CONFIG_RTL_819XD
- REG32(CLK_MANAGE) |= (1<<12)| (1<<13)|(1<<18);
-#endif
- mdelay(500);
- #ifdef CONFIG_RTL8198_REVISION_B
- if(portnum==1)
- {
- #define PAD_CONTROL 0xb8000048
- REG32(PAD_CONTROL)|=(1<<27);
- }
- #endif
-
-
- if(mdio_reset)
- {
- if(at2_mode==0) //no auto test, show message
- printk("Do MDIO_RESET\n");
- mdelay(1);
- // 3.MDIO Reset
- PCIE_MDIO_Reset(portnum);
- }
-/*
- PCIE_PHY_Reset(portnum);
- */
- mdelay(500);
- mdelay(500);
-
- //----------------------------------------
- if(mdio_reset)
- {
- //fix 8198 test chip pcie tx problem.
-#if defined(CONFIG_RTL8198_REVISION_B) || defined(CONFIG_RTL_819XD)
- if ((REG32(BSP_REVR) >= BSP_RTL8198_REVISION_B) || ((REG32(BSP_REVR)&0xfffff000) == BSP_RTL8197D))
- {
- #if 1//def RTL8198_FORMALCHIP_A
- HostPCIe_SetPhyMdioWrite(portnum, 0, 0xD087); //bokai tell, and fix
-
- HostPCIe_SetPhyMdioWrite(portnum, 1, 0x0003);
- HostPCIe_SetPhyMdioWrite(portnum, 2, 0x4d18);
- #ifdef CONFIG_PHY_EAT_40MHZ
- HostPCIe_SetPhyMdioWrite(portnum, 5, 0x0BCB); //40M
- #endif
-
- #ifdef CONFIG_PHY_EAT_40MHZ
- HostPCIe_SetPhyMdioWrite(portnum, 6, 0xF148); //40M
- #else
- HostPCIe_SetPhyMdioWrite(portnum, 6, 0xf848); //25M
- #endif
-
- HostPCIe_SetPhyMdioWrite(portnum, 7, 0x31ff);
- HostPCIe_SetPhyMdioWrite(portnum, 8, 0x18d5); //peisi tune
-
- #if 0 //old,
- HostPCIe_SetPhyMdioWrite(portnum, 9, 0x531c);
- HostPCIe_SetPhyMdioWrite(portnum, 0xd, 0x1766); //peisi tune
- #else //saving more power, 8196c pe-si tune
- HostPCIe_SetPhyMdioWrite(portnum, 0x09, 0x539c);
- HostPCIe_SetPhyMdioWrite(portnum, 0x0a, 0x20eb);
- HostPCIe_SetPhyMdioWrite(portnum, 0x0d, 0x1766);
- #endif
-#ifdef CONFIG_RTL_819XD
- HostPCIe_SetPhyMdioWrite(portnum, 0x0b, 0x0711); //for sloving low performance
-#else
- HostPCIe_SetPhyMdioWrite(portnum, 0x0b, 0x0511); //for sloving low performance
-#endif
-
- HostPCIe_SetPhyMdioWrite(portnum, 0xf, 0x0a00);
- HostPCIe_SetPhyMdioWrite(portnum, 0x19, 0xFCE0);
-
- HostPCIe_SetPhyMdioWrite(portnum, 0x1a, 0x7e4f); //formal chip, reg 0x1a.4=0
- HostPCIe_SetPhyMdioWrite(portnum, 0x1b, 0xFC01); //formal chip reg 0x1b.0=1
-
- HostPCIe_SetPhyMdioWrite(portnum, 0x1e, 0xC280);
-
- #endif
-
- }
- else
-#endif
- {
-//#define PHY_USE_TEST_CHIP 1 // 1: test chip, 0: fib chip
-//#define PHY_EAT_40MHZ 0 // 0: 25MHz, 1: 40MHz
-
- //HostPCIe_SetPhyMdioWrite(portnum, 0, 0xD187);//ori
- HostPCIe_SetPhyMdioWrite(portnum, 0, 0xD087);
-
- HostPCIe_SetPhyMdioWrite(portnum, 1, 0x0003);
- //HostPCIe_SetPhyMdioWrite(portnum, 2, 0x4d18);
- HostPCIe_SetPhyMdioWrite(portnum, 6, 0xf448); //new
- HostPCIe_SetPhyMdioWrite(portnum, 6, 0x408); //avoid noise infuse //15-12=0, 7-5=0, 0448
-
- HostPCIe_SetPhyMdioWrite(portnum, 7, 0x31ff);
- HostPCIe_SetPhyMdioWrite(portnum, 8, 0x18d5); //new
- HostPCIe_SetPhyMdioWrite(portnum, 9, 0x531c);
-
- //HostPCIe_SetPhyMdioWrite(portnum, 0xa, 0x00C9);
- //HostPCIe_SetPhyMdioWrite(portnum, 0xb, 0xe511);
- //HostPCIe_SetPhyMdioWrite(portnum, 0xc, 0x0820);
- HostPCIe_SetPhyMdioWrite(portnum, 0xd, 0x1766);
- HostPCIe_SetPhyMdioWrite(portnum, 0xf, 0x0010);//ori
- // HostPCIe_SetPhyMdioWrite(portnum, 0xf, 0x0a00);
-
- HostPCIe_SetPhyMdioWrite(portnum, 0x19, 0xFCE0);
- HostPCIe_SetPhyMdioWrite(portnum, 0x1e, 0xC280);
-
-
-
-#if 0 //saving more power
- HostPCIe_SetPhyMdioWrite(0xa, 0xeb);
- HostPCIe_SetPhyMdioWrite(0x9, 0x538c);
-
-// HostPCIe_SetPhyMdioWrite(0xc, 0xC828); //original
-// HostPCIe_SetPhyMdioWrite(0x0, 0x502F); //fix
-
- HostPCIe_SetPhyMdioWrite(0xc, 0x8828); //new
- HostPCIe_SetPhyMdioWrite(0x0, 0x502F); //fix
-#endif
- }
- }
-
- //---------------------------------------
- PCIE_Device_PERST(portnum);
-
- PCIE_PHY_Reset(portnum);
- mdelay(500);
- mdelay(500);
- result=PCIE_Check_Link(portnum);
- #if 0
- if(portnum==0)
- {
- if(result)
- {
- WRITE_MEM32(BSP_PCIE0_H_PWRCR, READ_MEM32(BSP_PCIE0_H_PWRCR) & 0xFFFFFF7F);
- mdelay(100);
- WRITE_MEM32(BSP_PCIE0_H_PWRCR, READ_MEM32(BSP_PCIE0_H_PWRCR) | 0x00000080);
- }
- }
- else
- {
- #ifdef PIN_208
- if(result)
- {
- WRITE_MEM32(BSP_PCIE1_H_PWRCR, READ_MEM32(BSP_PCIE1_H_PWRCR) & 0xFFFFFF7F);
- mdelay(100);
- WRITE_MEM32(BSP_PCIE1_H_PWRCR, READ_MEM32(BSP_PCIE1_H_PWRCR) | 0x00000080);
- }
- #endif
- }
- #endif
- return result;
-#endif
-
-//========================================================================================
-
-static int rtl8196b_pci_reset(void)
-{
- /* If PCI needs to be reset, put code here.
- * Note:
- * Software may need to do hot reset for a period of time, say ~100us.
- * Here we put 2ms.
- */
-#if 1
-//Modified for PCIE PHY parameter due to RD center suggestion by Jason 12252009
-WRITE_MEM32(0xb8000044, 0x9);//Enable PCIE PLL
-mdelay(10);
-//WRITE_MEM32(0xb8000010, 0x00FFFFD6);//Active LX & PCIE Clock in 8196B system register
-WRITE_MEM32(0xb8000010, READ_MEM32(0xb8000010)|(1<<8)|(1<<9)|(1<<10));
-#ifdef PIN_208
-WRITE_MEM32(0xb8000010, READ_MEM32(0xb8000010)|(1<<12));
-#endif
-mdelay(10);
-WRITE_MEM32(0xb800003C, 0x1);//PORT0 PCIE PHY MDIO Reset
-mdelay(10);
-WRITE_MEM32(0xb800003C, 0x3);//PORT0 PCIE PHY MDIO Reset
-mdelay(10);
-#ifdef PIN_208
-WRITE_MEM32(0xb8000040, 0x1);//PORT1 PCIE PHY MDIO Reset
-mdelay(10);
-WRITE_MEM32(0xb8000040, 0x3);//PORT1 PCIE PHY MDIO Reset
-mdelay(10);
-#endif
-WRITE_MEM32(0xb8b01008, 0x1);// PCIE PHY Reset Close:Port 0
-mdelay(10);
-WRITE_MEM32(0xb8b01008, 0x81);// PCIE PHY Reset On:Port 0
-mdelay(10);
-#ifdef PIN_208
-WRITE_MEM32(0xb8b21008, 0x1);// PCIE PHY Reset Close:Port 1
-mdelay(10);
-WRITE_MEM32(0xb8b21008, 0x81);// PCIE PHY Reset On:Port 1
-mdelay(10);
-#endif
-#ifdef OUT_CYSTALL
-WRITE_MEM32(0xb8b01000, 0xcc011901);// PCIE PHY Reset On:Port 0
-mdelay(10);
-#ifdef PIN_208
-WRITE_MEM32(0xb8b21000, 0xcc011901);// PCIE PHY Reset On:Port 1
-mdelay(10);
-#endif
-#endif
-//WRITE_MEM32(0xb8000010, 0x01FFFFD6);// PCIE PHY Reset On:Port 1
-WRITE_MEM32(0xb8000010, READ_MEM32(0xb8000010)|(1<<24));
-mdelay(10);
-#endif
- WRITE_MEM32(BSP_PCIE0_H_PWRCR, READ_MEM32(BSP_PCIE0_H_PWRCR) & 0xFFFFFF7F);
-#ifdef PIN_208
- WRITE_MEM32(BSP_PCIE1_H_PWRCR, READ_MEM32(BSP_PCIE1_H_PWRCR) & 0xFFFFFF7F);
-#endif
- mdelay(100);
- WRITE_MEM32(BSP_PCIE0_H_PWRCR, READ_MEM32(BSP_PCIE0_H_PWRCR) | 0x00000080);
-#ifdef PIN_208
- WRITE_MEM32(BSP_PCIE1_H_PWRCR, READ_MEM32(BSP_PCIE1_H_PWRCR) | 0x00000080);
-#endif
- return 0;
-}
-
-//========================================================================================
-
-static int rtl8196b_pcibios_config_access(unsigned char access_type,
- unsigned int addr, unsigned int *data)
-{
- /* Do 8bit/16bit/32bit access */
- if (access_type & PCI_ACCESS_WRITE)
- {
- if (access_type & PCI_8BIT_ACCESS)
- WRITE_MEM8(addr, *data);
- else if (access_type & PCI_16BIT_ACCESS)
- WRITE_MEM16(addr, *data);
- else
- WRITE_MEM32(addr, *data);
- }
- else if (access_type & PCI_ACCESS_READ)
- {
- if (access_type & PCI_8BIT_ACCESS)
- {
- #ifdef CONFIG_RTL8198_REVISION_B
- unsigned int data_temp=0; int swap[4]={0,8,16,24}; int diff = addr&0x3;
- data_temp=READ_MEM32(addr);
- *data=(unsigned int)(( data_temp>>swap[diff])&0xff);
- #else
- *data = READ_MEM8(addr);
- #endif
- }
- else if (access_type & PCI_16BIT_ACCESS)
- {
- #ifdef CONFIG_RTL8198_REVISION_B
- unsigned int data_temp=0; int swap[4]={0,8,16,24}; int diff = addr&0x3;
- data_temp=READ_MEM32(addr);
- *data=(unsigned int)(( data_temp>>swap[diff])&0xffff);
- #else
- *data = READ_MEM16(addr);
- #endif
- }
- else
- *data = READ_MEM32(addr);
- }
-
- /* If need to check for PCIE access timeout, put code here */
- /* ... */
-
- return 0;
-}
-
-
-//========================================================================================
-/*
- * RTL8196b supports config word read access for 8/16/32 bit
- *
- * FIXME: currently only utilize 32bit access
- */
-static int rtl8196b_pcibios0_read(struct pci_bus *bus, unsigned int devfn,
- int where, int size, unsigned int *val)
-{
- unsigned int data = 0;
- unsigned int addr = 0;
-
- if (pci0_bus_number == 0xff)
- pci0_bus_number = bus->number;
- #if DEBUG_PRINTK
- //printk("File: %s, Function: %s, Line: %d\n", __FILE__, __FUNCTION__, __LINE__);
- //printk("Bus: %d, Slot: %d, Func: %d, Where: %d, Size: %d\n", bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn), where, size);
- #endif
-
- if (bus->number == pci0_bus_number)
- {
- /* PCIE host controller */
- if (PCI_SLOT(devfn) == 0)
- {
- addr = BSP_PCIE0_H_CFG + where;
-
- if (rtl8196b_pcibios_config_access(PCI_ACCESS_READ | PCI_32BIT_ACCESS, addr & ~(0x3), &data))
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- if (size == 1)
- *val = (data >> ((where & 3) << 3)) & 0xff;
- else if (size == 2)
- *val = (data >> ((where & 3) << 3)) & 0xffff;
- else
- *val = data;
- }
- else
- return PCIBIOS_DEVICE_NOT_FOUND;
- }
- else if (bus->number == (pci0_bus_number + 1))
- {
- /* PCIE devices directly connected */
- if (PCI_SLOT(devfn) == 0)
- {
- addr = BSP_PCIE0_D_CFG0 + (PCI_FUNC(devfn) << 12) + where;
-
- if (rtl8196b_pcibios_config_access(PCI_ACCESS_READ | size, addr, val))
- return PCIBIOS_DEVICE_NOT_FOUND;
- }
- else
- return PCIBIOS_DEVICE_NOT_FOUND;
- }
- else
- {
- /* Devices connected through bridge */
- if (PCI_SLOT(devfn) < MAX_NUM_DEV)
- {
- WRITE_MEM32(BSP_PCIE0_H_IPCFG, ((bus->number) << 8) | (PCI_SLOT(devfn) << 3) | PCI_FUNC(devfn));
- addr = BSP_PCIE0_D_CFG1 + where;
-
- if (rtl8196b_pcibios_config_access(PCI_ACCESS_READ | size, addr, val))
- return PCIBIOS_DEVICE_NOT_FOUND;
- }
- else
- return PCIBIOS_DEVICE_NOT_FOUND;
- }
-#if defined(CONFIG_RTL_819XD)
- REG32(0xb8000014)=0x800200;
-#endif
- #if DEBUG_PRINTK
- //printk("File: %s, Function: %s, Line: %d\n", __FILE__, __FUNCTION__, __LINE__);
- //printk("Read Value: 0x%08X\n", *val);
- #endif
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-//========================================================================================
-static int rtl8196b_pcibios0_write(struct pci_bus *bus, unsigned int devfn,
- int where, int size, unsigned int val)
-{
- unsigned int data = 0;
- unsigned int addr = 0;
-
- static int pci0_bus_number = 0xff;
- if (pci0_bus_number == 0xff)
- pci0_bus_number = bus->number;
-
- #if DEBUG_PRINTK
- //printk("File: %s, Function: %s, Line: %d\n", __FILE__, __FUNCTION__, __LINE__);
- //printk("Bus: %d, Slot: %d, Func: %d, Where: %d, Size: %d\n", bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn), where, size);
- #endif
-
- if (bus->number == pci0_bus_number)
- {
- /* PCIE host controller */
- if (PCI_SLOT(devfn) == 0)
- {
- addr = BSP_PCIE0_H_CFG + where;
-
- if (rtl8196b_pcibios_config_access(PCI_ACCESS_READ | PCI_32BIT_ACCESS, addr & ~(0x3), &data))
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- if (size == 1)
- data = (data & ~(0xff << ((where & 3) << 3))) | (val << ((where & 3) << 3));
- else if (size == 2)
- data = (data & ~(0xffff << ((where & 3) << 3))) | (val << ((where & 3) << 3));
- else
- data = val;
-
- if (rtl8196b_pcibios_config_access(PCI_ACCESS_WRITE | PCI_32BIT_ACCESS, addr & ~(0x3), &data))
- return PCIBIOS_DEVICE_NOT_FOUND;
- }
- else
- return PCIBIOS_DEVICE_NOT_FOUND;
- }
- else if (bus->number == (pci0_bus_number + 1))
- {
- /* PCIE devices directly connected */
- if (PCI_SLOT(devfn) == 0)
- {
- addr = BSP_PCIE0_D_CFG0 + (PCI_FUNC(devfn) << 12) + where;
-
- if (rtl8196b_pcibios_config_access(PCI_ACCESS_WRITE | size, addr, &val))
- return PCIBIOS_DEVICE_NOT_FOUND;
- }
- else
- return PCIBIOS_DEVICE_NOT_FOUND;
- }
- else
- {
- /* Devices connected through bridge */
- if (PCI_SLOT(devfn) < MAX_NUM_DEV)
- {
- WRITE_MEM32(BSP_PCIE0_H_IPCFG, ((bus->number) << 8) | (PCI_SLOT(devfn) << 3) | PCI_FUNC(devfn));
- addr = BSP_PCIE0_D_CFG1 + where;
-
- if (rtl8196b_pcibios_config_access(PCI_ACCESS_WRITE | size, addr, &val))
- return PCIBIOS_DEVICE_NOT_FOUND;
- }
- else
- return PCIBIOS_DEVICE_NOT_FOUND;
- }
-
- return PCIBIOS_SUCCESSFUL;
-}
-//========================================================================================
-
-/*
- * RTL8196b supports config word read access for 8/16/32 bit
- *
- * FIXME: currently only utilize 32bit access
- */
-#ifdef PIN_208
-static int rtl8196b_pcibios1_read(struct pci_bus *bus, unsigned int devfn,
- int where, int size, unsigned int *val)
-{
- unsigned int data = 0;
- unsigned int addr = 0;
-
- if (pci1_bus_number == 0xff)
- pci1_bus_number = bus->number;
-
- #if DEBUG_PRINTK
- printk("File: %s, Function: %s, Line: %d\n", __FILE__, __FUNCTION__, __LINE__);
- printk("Bus: %d, Slot: %d, Func: %d, Where: %d, Size: %d\n", bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn), where, size);
- #endif
-
- if (bus->number == pci1_bus_number)
- {
- /* PCIE host controller */
- if (PCI_SLOT(devfn) == 0)
- {
- addr = BSP_PCIE1_H_CFG + where;
-
- if (rtl8196b_pcibios_config_access(PCI_ACCESS_READ | PCI_32BIT_ACCESS, addr & ~(0x3), &data))
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- if (size == 1)
- *val = (data >> ((where & 3) << 3)) & 0xff;
- else if (size == 2)
- *val = (data >> ((where & 3) << 3)) & 0xffff;
- else
- *val = data;
- }
- else
- return PCIBIOS_DEVICE_NOT_FOUND;
- }
- else if (bus->number == (pci1_bus_number + 1))
- {
- /* PCIE devices directly connected */
- if (PCI_SLOT(devfn) == 0)
- {
- addr = BSP_PCIE1_D_CFG0 + (PCI_FUNC(devfn) << 12) + where;
-
- if (rtl8196b_pcibios_config_access(PCI_ACCESS_READ | size, addr, val))
- return PCIBIOS_DEVICE_NOT_FOUND;
- }
- else
- return PCIBIOS_DEVICE_NOT_FOUND;
- }
- else
- {
- /* Devices connected through bridge */
- if (PCI_SLOT(devfn) < MAX_NUM_DEV)
- {
- WRITE_MEM32(BSP_PCIE1_H_IPCFG, ((bus->number) << 8) | (PCI_SLOT(devfn) << 3) | PCI_FUNC(devfn));
- addr = BSP_PCIE1_D_CFG1 + where;
-
- if (rtl8196b_pcibios_config_access(PCI_ACCESS_READ | size, addr, val))
- return PCIBIOS_DEVICE_NOT_FOUND;
- }
- else
- return PCIBIOS_DEVICE_NOT_FOUND;
- }
-
- #if DEBUG_PRINTK
- printk("0xb8000014:%x\n",REG32(0xb8000014));
- //printk("File: %s, Function: %s, Line: %d\n", __FILE__, __FUNCTION__, __LINE__);
- //printk("Read Value: 0x%08X\n", *val);
- #endif
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-//========================================================================================
-static int rtl8196b_pcibios1_write(struct pci_bus *bus, unsigned int devfn,
- int where, int size, unsigned int val)
-{
- unsigned int data = 0;
- unsigned int addr = 0;
-
- static int pci1_bus_number = 0xff;
-
- if (pci1_bus_number == 0xff)
- pci1_bus_number = bus->number;
-
- #if DEBUG_PRINTK
- printk("0xb8000014:%x\n",REG32(0xb8000014));
- //printk("File: %s, Function: %s, Line: %d\n", __FILE__, __FUNCTION__, __LINE__);
- //printk("Bus: %d, Slot: %d, Func: %d, Where: %d, Size: %d\n", bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn), where, size);
- #endif
-
-
- if (bus->number == pci1_bus_number)
- {
- /* PCIE host controller */
- if (PCI_SLOT(devfn) == 0)
- {
- addr = BSP_PCIE1_H_CFG + where;
-
- if (rtl8196b_pcibios_config_access(PCI_ACCESS_READ | PCI_32BIT_ACCESS, addr & ~(0x3), &data))
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- if (size == 1)
- data = (data & ~(0xff << ((where & 3) << 3))) | (val << ((where & 3) << 3));
- else if (size == 2)
- data = (data & ~(0xffff << ((where & 3) << 3))) | (val << ((where & 3) << 3));
- else
- data = val;
-
- if (rtl8196b_pcibios_config_access(PCI_ACCESS_WRITE | PCI_32BIT_ACCESS, addr & ~(0x3), &data))
- return PCIBIOS_DEVICE_NOT_FOUND;
- }
- else
- return PCIBIOS_DEVICE_NOT_FOUND;
- }
- else if (bus->number == (pci1_bus_number + 1))
- {
- /* PCIE devices directly connected */
- if (PCI_SLOT(devfn) == 0)
- {
- addr = BSP_PCIE1_D_CFG0 + (PCI_FUNC(devfn) << 12) + where;
-
- if (rtl8196b_pcibios_config_access(PCI_ACCESS_WRITE | size, addr, &val))
- return PCIBIOS_DEVICE_NOT_FOUND;
- }
- else
- return PCIBIOS_DEVICE_NOT_FOUND;
- }
- else
- {
- /* Devices connected through bridge */
- if (PCI_SLOT(devfn) < MAX_NUM_DEV)
- {
- WRITE_MEM32(BSP_PCIE1_H_IPCFG, ((bus->number) << 8) | (PCI_SLOT(devfn) << 3) | PCI_FUNC(devfn));
- addr = BSP_PCIE1_D_CFG1 + where;
-
- if (rtl8196b_pcibios_config_access(PCI_ACCESS_WRITE | size, addr, &val))
- return PCIBIOS_DEVICE_NOT_FOUND;
- }
- else
- return PCIBIOS_DEVICE_NOT_FOUND;
- }
-
- return PCIBIOS_SUCCESSFUL;
-}
-#endif
-//========================================================================================
-struct pci_ops rtl8196b_pci0_ops = {
- .read = rtl8196b_pcibios0_read,
- .write = rtl8196b_pcibios0_write
-};
-
-#ifdef PIN_208
-struct pci_ops rtl8196b_pci1_ops = {
- .read = rtl8196b_pcibios1_read,
- .write = rtl8196b_pcibios1_write
-};
-#endif
-
-static struct pci_controller rtl8196b_pci0_controller = {
- .pci_ops = &rtl8196b_pci0_ops,
- .mem_resource = &rtl8196b_pci0_mem_resource,
- .io_resource = &rtl8196b_pci0_io_resource,
-};
-
-#ifdef PIN_208
-static struct pci_controller rtl8196b_pci1_controller = {
- .pci_ops = &rtl8196b_pci1_ops,
- .mem_resource = &rtl8196b_pci1_mem_resource,
- .io_resource = &rtl8196b_pci1_io_resource,
-};
-#endif
-
-//========================================================================================
-int pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
-{
- #if DEBUG_PRINTK
- printk("File: %s, Function: %s, Line: %d\n", __FILE__, __FUNCTION__, __LINE__);
- printk("**Slot: %d\n", slot);
- printk("**Pin: %d\n", pin);
- printk("**Dev->BUS->Number: %d\n", dev->bus->number);
- #endif
-
-#if defined(CONFIG_RTL_819XD)
- if (dev->bus->number < pci1_bus_number)
- return BSP_PCIE_IRQ;
- else
- return BSP_PCIE2_IRQ;
-#else
- return BSP_PCIE_IRQ;
-#endif
-}
-//========================================================================================
-/* Do platform specific device initialization at pci_enable_device() time */
-int pcibios_plat_dev_init(struct pci_dev *dev)
-{
- #if DEBUG_PRINTK
- printk("File: %s, Function: %s, Line: %d\n", __FILE__, __FUNCTION__, __LINE__);
- #endif
-
- return 0;
-}
-
-static __init int bsp_pcie_init(void)
-{
-
- int Use_External_PCIE_CLK=0;
- int result=0,result1=0;
-
- printk("<<<<<Register 1st PCI Controller>>>>>\n");
- mdelay(1);
-
- //sry i need more time to figure out all how that stuff should coorectly work
- #if defined(CONFIG_RTL_8196C)
- result=PCIE_reset_procedure(0, 0, 1);
- if (result)
- register_pci_controller(&rtl8196b_pci0_controller);
- else
- REG32(CLK_MANAGE) &= (~(1<<11)); //disable active_pcie0
- #elif defined(CONFIG_RTL_819XD)
- #ifndef CONFIG_RTL_DUAL_PCIESLOT_BIWLAN_D
- #ifndef PIN_208
- result=PCIE_reset_procedure(0, Use_External_PCIE_CLK, 1);
- #else
- result=PCIE_reset_procedure(0, Use_External_PCIE_CLK, 1);
- mdelay(1);
- result1=PCIE_reset_procedure(1, Use_External_PCIE_CLK, 1);
- #endif
- #else //wei add
- OnlyOneReset();
-
- result=PCIE_Check_Link(0);
- result1=PCIE_Check_Link(1);
-
- #endif
-
- #if DEBUG_PRINTK
- printk("<<<<<Register 1st PCI Controller>>>>>\n");
- #ifdef PIN_208
- printk("<<<<<Register 2nd PCI Controller>>>>>\n");
- #endif
- #endif
- mdelay(1);
- #ifndef CONFIG_RTL_DUAL_PCIESLOT_BIWLAN_D
- if(result)
- register_pci_controller(&rtl8196b_pci0_controller);
- else
- {
- REG32(CLK_MANAGE) &= (~(1<<14)); //disable active_pcie0
- }
- #ifdef PIN_208
- if(result1)
- register_pci_controller(&rtl8196b_pci1_controller);
- else
- {
- REG32(CLK_MANAGE) &= (~(1<<16)); //disable active_pcie1
- }
- #endif
- #else
-
- if(result1)
- register_pci_controller(&rtl8196b_pci1_controller);
- else
- { REG32(CLK_MANAGE) &= (~(1<<16)); //disable active_pcie1
- }
-
-
- if(result)
- register_pci_controller(&rtl8196b_pci0_controller);
- else
- { REG32(CLK_MANAGE) &= (~(1<<14)); //disable active_pcie0
- }
-
-
- #endif
- #endif
-
- return 0
-}
-
-arch_initcall(bsp_pcie_init);
diff --git a/target/linux/realtek/files/arch/rlx/bsp/prom.c b/target/linux/realtek/files/arch/rlx/bsp/prom.c
deleted file mode 100644
index 1580cc1fe..000000000
--- a/target/linux/realtek/files/arch/rlx/bsp/prom.c
+++ /dev/null
@@ -1,184 +0,0 @@
-/*
- * Copyright (C) 2006, Realtek Semiconductor Corp.
- * Copyright (C) 2013, Artur Artamonov (artur@advem.lv)
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
-
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <asm/bootinfo.h>
-#include <asm/addrspace.h>
-#include <asm/page.h>
-#include <asm/cpu.h>
-
-#include <asm/rlxbsp.h>
-
-#include "bspchip.h"
-#include "bspcpu.h"
-#include "rlxhack.h"
-
-extern char arcs_cmdline[];
-
-#ifdef CONFIG_EARLY_PRINTK
-static int promcons_output __initdata = 0;
-
-void unregister_prom_console(void)
-{
- if (promcons_output) {
- promcons_output = 0;
- }
-}
-
-void disable_early_printk(void)
- __attribute__ ((alias("unregister_prom_console")));
-#endif
-
-
-const char *get_system_type(void)
-{
-#if defined(CONFIG_RTL_8196C)
- return "RTL8196C";
-#elif defined(CONFIG_RTL_819XD)
- return "RTL819xD";
-#endif
-}
-
-/* Do basic initialization */
-void __init bsp_init(void)
-{
- u_long mem_size;
-
- /*user CMLLINE created by menuconfig*/
- /*
- arcs_cmdline[0] = '\0';
- strcpy(arcs_cmdline, "console=ttyS0,38400");
- */
-
-#if defined(CONFIG_RTL_819X)
- #ifdef cpu_mem_size
- mem_size = cpu_mem_size;
- #elif defined(RTL_8198_NFBI_BOARD)
- mem_size = ((7 << 20)-16); //reserve 16 byte for firmware header;
- #endif
- /*now: alway believe DRAM configuration register*/
- {
- unsigned int DCRvalue = 0;
- unsigned int bus_width = 0, chip_sel = 0, row_cnt = 0, col_cnt = 0,bank_cnt = 0;
-
- DCRvalue = ( (*(volatile unsigned int *)BSP_MC_MTCR0));
-
- /*bit 19,0:2 bank; 1: 4 bank*/
- switch(DCRvalue & 0x080000)
- {
- case 0x0:
- bank_cnt = 2;
- break;
- case 0x080000:
- bank_cnt = 4;
- break;
- default:
- bank_cnt = 0;
- break;
- }
-
- /*bit 22~24: colomn count*/
- switch(DCRvalue & 0x01C00000)
- {
- case 0x00000000:
- col_cnt = 256;
- break;
- case 0x00400000:
- col_cnt = 512;
- break;
- case 0x00800000:
- col_cnt = 1024;
- break;
- case 0x00C00000:
- col_cnt = 2048;
- break;
- case 0x01000000:
- col_cnt = 4096;
- break;
- default:
- printk("unknow colomn count(0x%x)\n",DCRvalue & 0x01C00000);
- break;
- }
-
- /*bit 25~26: row count*/
- switch(DCRvalue & 0x06000000)
- {
- case 0x00000000:
- row_cnt = 2048;
- break;
- case 0x02000000:
- row_cnt = 4096;
- break;
- case 0x04000000:
- row_cnt = 8192;
- break;
- case 0x06000000:
- row_cnt = 16384;
- break;
- default:
- printk("unknow row count(0x%x)\n",DCRvalue & 0x06000000);
- break;
- }
-
- /*bit 27: chip select*/
- switch(DCRvalue & 0x08000000)
- {
- case 0x0:
- chip_sel = 1;
- break;
- case 0x08000000:
- chip_sel = 2;
- break;
- default:
- printk("unknow chip select(0x%x)\n",DCRvalue & 0x08000000);
- break;
- }
-
- /*bit 28~29: bus width*/
- switch(DCRvalue & 0x30000000)
- {
- case 0x0:
- bus_width = 8;
- break;
- case 0x10000000:
- bus_width = 16;
- break;
- case 0x20000000:
- bus_width = 32;
- break;
- default:
- printk("bus width is reseved!\n");
- break;
- }
-
- /*total size(Byte)*/
- if((REG32(0xb800100C)&0x40000000) == 0x40000000)
- {
- mem_size = (row_cnt * col_cnt *bank_cnt) * (bus_width >> 3) * chip_sel*2;
- }
- else
- {
- mem_size = (row_cnt * col_cnt *bank_cnt) * (bus_width >> 3) * chip_sel;
- }
- }
-#else
- mem_size = cpu_mem_size;
-#endif
- add_memory_region(0, mem_size, BOOT_MEM_RAM);
-}
-
-void __init bsp_free_prom_memory(void)
-{
- return;
-}
diff --git a/target/linux/realtek/files/arch/rlx/bsp/rlxhack.h b/target/linux/realtek/files/arch/rlx/bsp/rlxhack.h
deleted file mode 100644
index 5d7d87433..000000000
--- a/target/linux/realtek/files/arch/rlx/bsp/rlxhack.h
+++ /dev/null
@@ -1,21 +0,0 @@
-#ifndef __RLXHACK_H
-#define __RLXHACK_H
-
-/*
- * Register access macro
- */
-
-#define REG32(reg) (*(volatile unsigned int *)((unsigned int)reg))
-#define REG16(reg) (*(volatile unsigned short *)((unsigned int)reg))
-#define REG08(reg) (*(volatile unsigned char *)((unsigned int)reg))
-#define REG8(reg) (*(volatile unsigned char *)((unsigned int)reg))
-
-#define WRITE_MEM32(addr, val) (*(volatile unsigned int *) (addr)) = (val)
-#define READ_MEM32(addr) (*(volatile unsigned int *) (addr))
-#define WRITE_MEM16(addr, val) (*(volatile unsigned short *) (addr)) = (val)
-#define READ_MEM16(addr) (*(volatile unsigned short *) (addr))
-#define WRITE_MEM8(addr, val) (*(volatile unsigned char *) (addr)) = (val)
-#define READ_MEM8(addr) (*(volatile unsigned char *) (addr))
-
-
-#endif
diff --git a/target/linux/realtek/files/arch/rlx/bsp/serial.c b/target/linux/realtek/files/arch/rlx/bsp/serial.c
deleted file mode 100644
index f4e1ef19d..000000000
--- a/target/linux/realtek/files/arch/rlx/bsp/serial.c
+++ /dev/null
@@ -1,94 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * Copyright (C) 2006, Realtek Semiconductor Corp.
- * Copyright (C) 2013, Artur Artamonov <artur@advem.lv>
- */
-
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/serial.h>
-#include <linux/serial_core.h>
-#include <linux/serial_8250.h>
-#include <linux/string.h>
-
-#include <asm/serial.h>
-
-#include "bspchip.h"
-
-void __init bsp_serial_init(void)
-{
-#ifdef CONFIG_SERIAL_SC16IS7X0
- extern void __init sc16is7x0_get_port( struct uart_port *port );
-#endif
-#if defined( CONFIG_SERIAL_SC16IS7X0 ) || defined( CONFIG_SERIAL_RTL8198_UART1 )
- unsigned int line = 0;
-#else
- const unsigned int line = 0;
-#endif
- struct uart_port s;
-
- /* clear memory */
- memset(&s, 0, sizeof(s));
-
- /*
- * UART0
- */
- s.line = line;
- s.type = PORT_16550A;
- s.irq = BSP_UART0_IRQ;
- s.iotype = UPIO_MEM;
- s.regshift = 2;
-#if 1
- s.uartclk = BSP_SYS_CLK_RATE;
- s.fifosize = 16;
- //s.flags = UPF_SKIP_TEST | UPF_LOW_LATENCY;
- s.flags = UPF_SKIP_TEST;
- s.mapbase = BSP_UART0_MAP_BASE;
- //s.membase = ioremap_nocache(s.mapbase, BSP_UART0_MAPSIZE);
- s.membase = ioremap_nocache(s.mapbase, 0x20);
-#else
- s.uartclk = BSP_SYS_CLK_RATE - BSP_BAUDRATE * 24; //???
- s.fifosize = 1; //???
- s.flags = UPF_SKIP_TEST | UPF_LOW_LATENCY | UPF_SPD_CUST;
- s.membase = (unsigned char *)BSP_UART0_BASE;
- s.custom_divisor = BSP_SYS_CLK_RATE / (BSP_BAUDRATE * 16) - 1;
-#endif
-
- if (early_serial_setup(&s) != 0)
- {
- #if defined(CONFIG_RTL_8196C)
- panic("RTL8196C: bsp_serial_init failed!");
- #elif defined(CONFIG_RTL_819XD)
- panic("RTL8196D: bsp_serial_init failed!");
- #endif
- }
-#ifdef CONFIG_SERIAL_RTL8198_UART1
- // UART1
- #define UART_BASE 0xB8000100 //0xb8002100 uart 1
- REG32(0xb8000040) = (REG32(0xb8000040) & ~(0x3<<3)) | (0x01<<3); //pin mux to UART1
- REG32(0xb8002110) |= (1<<29); //enable flow control
- s.line = ++ line;
- s.irq = BSP_UART1_IRQ;
- s.mapbase = BSP_UART1_MAP_BASE;
- s.membase = ioremap_nocache(s.mapbase, 0x20);
-
- if (early_serial_setup(&s) != 0) {
- panic("RTL819xD: bsp_serial_init UART1 failed!");
- }
-#endif
-
-#ifdef CONFIG_SERIAL_SC16IS7X0
- sc16is7x0_get_port( &s );
- s.line = ++ line;
-
- if (early_serial_setup(&s) != 0) {
- panic("RTL819xD: bsp_serial_init i2c uart failed!");
- }
-#endif
-}
diff --git a/target/linux/realtek/files/arch/rlx/bsp/setup.c b/target/linux/realtek/files/arch/rlx/bsp/setup.c
deleted file mode 100644
index 48b776044..000000000
--- a/target/linux/realtek/files/arch/rlx/bsp/setup.c
+++ /dev/null
@@ -1,196 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * Copyright (C) 2006, Realtek Semiconductor Corp.
- * Copyright (C) 2013, Artur Artamonov (artur@advem.lv)
- */
-
-#include <linux/console.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/sched.h>
-#include <linux/netdevice.h>
-#include <linux/rtnetlink.h>
-
-#include <asm/addrspace.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-
-#include <asm/bootinfo.h>
-#include <asm/time.h>
-#include <asm/reboot.h>
-#include <asm/rlxbsp.h>
-
-#include <asm/rtl865x/rtl865xc_asicregs.h>
-
-#include "bspchip.h"
-
-extern int bsp_swcore_init(unsigned int version);
-extern void rtl819x_add_device_usb(void);
-
-static void prom_putchar(char c)
-{
-#define UART0_BASE 0xB8002000
-#define UART0_THR (UART0_BASE + 0x000)
-#define UART0_FCR (UART0_BASE + 0x008)
-#define UART0_LSR (UART0_BASE + 0x014)
-#define TXRST 0x04
-#define CHAR_TRIGGER_14 0xC0
-#define LSR_THRE 0x20
-#define TxCHAR_AVAIL 0x00
-#define TxCHAR_EMPTY 0x20
-unsigned int busy_cnt = 0;
-
- do
- {
- /* Prevent Hanging */
- if (busy_cnt++ >= 30000)
- {
- /* Reset Tx FIFO */
- REG8(UART0_FCR) = TXRST | CHAR_TRIGGER_14;
- return;
- }
- } while ((REG8(UART0_LSR) & LSR_THRE) == TxCHAR_AVAIL);
-
- /* Send Character */
- REG8(UART0_THR) = c;
-}
-
-static void early_console_write(const char *s, unsigned n)
-{
- while (n-- && *s) {
- if (*s == '\n')
- prom_putchar('\r');
- prom_putchar(*s);
- s++;
- }
-}
-
-
-static void shutdown_netdev(void)
-{
- struct net_device *dev;
-
- printk("Shutdown network interface\n");
- read_lock(&dev_base_lock);
-
- for_each_netdev(&init_net, dev)
- {
- if(dev->flags &IFF_UP)
- {
- printk("%s:===>\n",dev->name);
- rtnl_lock();
-#if defined(CONFIG_COMPAT_NET_DEV_OPS)
- if(dev->stop)
- dev->stop(dev);
-#else
- if ((dev->netdev_ops)&&(dev->netdev_ops->ndo_stop))
- dev->netdev_ops->ndo_stop(dev);
-#endif
- rtnl_unlock();
- }
- }
-#if defined(CONFIG_RTL8192CD) || defined(CONFIG_RTL8192E)
- {
- extern void force_stop_wlan_hw(void);
- force_stop_wlan_hw();
- }
-#endif
- read_unlock(&dev_base_lock);
-}
-
-static void bsp_machine_restart(char *command)
-{
- static void (*back_to_prom)(void) = (void (*)(void)) 0xbfc00000;
-
- REG32(GIMR)=0;
-
- local_irq_disable();
-#ifdef CONFIG_NET
- shutdown_netdev();
-#endif
- REG32(BSP_WDTCNR) = 0; //enable watch dog
- while (1) ;
- /* Reboot */
- back_to_prom();
-}
-
-static void bsp_machine_halt(void)
-{
- while(1);
-}
-
-static void bsp_machine_power_off(void)
-{
- while(1);
-}
-
-/*
- * callback function
- */
-extern void _imem_dmem_init(void);
-void __init bsp_setup(void)
-{
- int ret= -1;
- unsigned int version = 0;
- #if defined(CONFIG_RTL_819XD)
- if((REG32(0xb8000000)&0xf)<3)
- {
- REG32(0xb8000088)= (REG32(0xb8000088) & ( ~(3<<5)&~(0xF<<0)));
- //printk("0xb8000088=%x\n",REG32(0xb8000088));
- REG32(0xb8000088) =(REG32(0xb8000088)|(1<<4));
- //printk("0xb8000088=%x\n",REG32(0xb8000088));
- REG32(0xb8000088) = REG32(0xb8000088) & (~(3<<7));
- //printk("0xb8000088=%x\n",REG32(0xb8000088));
- }
- #endif
-
- /* define io/mem region */
- ioport_resource.start = 0x18000000;
- ioport_resource.end = 0x1fffffff;
-
- iomem_resource.start = 0x18000000;
- iomem_resource.end = 0x1fffffff;
-
- /* set reset vectors */
- _machine_restart = bsp_machine_restart;
- _machine_halt = bsp_machine_halt;
- pm_power_off = bsp_machine_power_off;
-
-#if defined(CONFIG_RTL_819XD)
- #if defined(CONFIG_RTL_DUAL_PCIESLOT_BIWLAN_D)
- {
- unsigned int tmp=0,tmp1=0,tmp2=0;
- tmp1=REG32(0xb8001004);
- if((REG32(0xb8001000)&0x80000000)==0x80000000)
- {
- //REG32(0xb8001008)=0x6d13a4c0;
- REG32(0xb8001004)=tmp1;
- }
- }
- #endif
-#endif
-
- #if defined(CONFIG_RTL_8196C)
- version = 15;
- #elif defined(CONFIG_RTL_819XD)
- version = 8;
- #endif
- /* initialize uart */
- bsp_serial_init();
- _imem_dmem_init();
-
- /* initialize switch core */
-#if defined(CONFIG_RTL_819X)
- ret = bsp_swcore_init(version);
- if(ret != 0)
- {
- bsp_machine_halt();
- }
-#endif
-}
-
-pure_initcall(rtl819x_add_device_usb);
diff --git a/target/linux/realtek/files/arch/rlx/bsp/timer.c b/target/linux/realtek/files/arch/rlx/bsp/timer.c
deleted file mode 100644
index 137e73557..000000000
--- a/target/linux/realtek/files/arch/rlx/bsp/timer.c
+++ /dev/null
@@ -1,146 +0,0 @@
-/*
- * linux/arch/rlx/rlxocp/time.c
- *
- * Copyright (C) 1999 Harald Koerfgen
- * Copyright (C) 2000 Pavel Machek (pavel@suse.cz)
- * Copyright (C) 2001 Steven J. Hill (sjhill@realitydiluted.com)
- * Copyright (C) 2006 Realtek Semiconductor Corp.
- * Copyright (C) 2013 Artur Artamonov (artur@advem.lv)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Time handling functinos for Philips Nino.
- */
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/timex.h>
-#include <linux/delay.h>
-
-#include <asm/time.h>
-#include <asm/rlxbsp.h>
-
-#include "bspchip.h"
-#include "rlxhack.h"
-
-#ifdef CONFIG_RTL_TIMER_ADJUSTMENT
-#include <net/rtl/rtl_types.h>
-#include <rtl865xc_asicregs.h>
-
-void rtl865x_setupTimer1(void)
-{
- WRITE_MEM32( BSP_TCCNR, READ_MEM32(BSP_TCCNR) & ~BSP_TC1EN );/* Disable timer1 */
- #ifdef CONFIG_RTL8196C_REVISION_B
- WRITE_MEM32( BSP_TC1DATA, 0xfffffff0);
- #else
- WRITE_MEM32( BSP_TC1DATA, 0xffffff00);
- #endif
- WRITE_MEM32( BSP_TCCNR, ( READ_MEM32(BSP_TCCNR) | BSP_TC1EN ) | BSP_TC1MODE_TIMER );/* Enable timer1 - timer mode */
- WRITE_MEM32( BSP_TCIR, READ_MEM32(BSP_TCIR) & ~BSP_TC1IE ); /* Disable timer1 interrupt */
-}
-#endif
-
-void inline bsp_timer_ack(void)
-{
- REG32(BSP_TCIR) |= BSP_TC0IP;
-}
-
-void __init bsp_timer_init(void)
-{
- unsigned int sys_clock_rate;
-
- sys_clock_rate = BSP_SYS_CLK_RATE;
-
- /* Clear Timer IP status */
- if (REG32(BSP_TCIR) & BSP_TC0IP)
- REG32(BSP_TCIR) |= BSP_TC0IP;
-
- /* disable timer */
- REG32(BSP_TCCNR) = 0; /* disable timer before setting CDBR */
-
- /* initialize timer registers */
-#if defined(CONFIG_RTL_8196C)
- REG32(BSP_CDBR)=(BSP_DIVISOR*8) << BSP_DIVF_OFFSET;
- #ifdef CONFIG_RTL8196C_REVISION_B
- if (REG32(BSP_REVR) == RTL8196C_REVISION_B)
- REG32(BSP_TC0DATA) = (((sys_clock_rate/(BSP_DIVISOR*8))/HZ)) << 4;
- else
- #endif
- REG32(BSP_TC0DATA) = (((sys_clock_rate/(BSP_DIVISOR*8))/HZ)) << BSP_TCD_OFFSET;
-
-//when will add one more platform change to more generic code
-#elif defined(CONFIG_RTL_819XD)
- REG32(BSP_CDBR)=(BSP_DIVISOR) << BSP_DIVF_OFFSET;
- #if defined(CONFIG_RTL8198_REVISION_B) || defined(CONFIG_RTL_819XD)
- if ((REG32(BSP_REVR) >= BSP_RTL8198_REVISION_B) || ((REG32(BSP_REVR) & 0xFFFFF000) == BSP_RTL8197D))
- REG32(BSP_TC0DATA) = (((sys_clock_rate/BSP_DIVISOR)/HZ)) << 4;
- else
- #endif
- REG32(BSP_TC0DATA) = (((sys_clock_rate/BSP_DIVISOR)/HZ)) << BSP_TCD_OFFSET;
- #if defined(CONFIG_RTL_WTDOG)
- #ifdef CONFIG_RTK_VOIP
- {
- extern void bsp_enable_watchdog( void );
- bsp_enable_watchdog();
- }
- #else
- REG32(BSP_WDTCNR) = 0x00600000;
- #endif
- #endif
-#endif
-
-
- // extend timer base to 4 times
- //REG32(BSP_CDBR)=(BSP_DIVISOR*4) << BSP_DIVF_OFFSET;
- //REG32(BSP_TC0DATA) = (((sys_clock_rate/(BSP_DIVISOR*4))/HZ)) << BSP_TCD_OFFSET;
-#if defined(CONFIG_RTL_WTDOG)
- REG32(BSP_WDTCNR) = 0x00600000;
-#endif
-
- /* hook up timer interrupt handler */
- rlx_clockevent_init(BSP_TC0_IRQ);
-
- /* enable timer */
- REG32(BSP_TCCNR) = BSP_TC0EN | BSP_TC0MODE_TIMER;
- REG32(BSP_TCIR) = BSP_TC0IE;
-#ifdef CONFIG_RTL_TIMER_ADJUSTMENT
- rtl865x_setupTimer1();
-#endif
-
-}
-
-#ifdef CONFIG_RTK_VOIP
-void timer1_enable(void)
-{
- printk( "timer1_enable not implement!!\n" );
-}
-
-void timer1_disable(void)
-{
- printk( "timer1_disable not implement!!\n" );
-}
-
-#ifdef CONFIG_RTL_WTDOG
-int bBspWatchdog = 0;
-
-void bsp_enable_watchdog( void )
-{
- bBspWatchdog = 1;
- *(volatile unsigned long *)(0xb800311C)=0x00600000;
-}
-
-void bsp_disable_watchdog( void )
-{
- *(volatile unsigned long *)(0xb800311C)=0xA5600000;
- bBspWatchdog = 0;
-}
-#endif // CONFIG_RTL_WTDOG
-
-#endif // CONFIG_RTK_VOIP
diff --git a/target/linux/realtek/files/arch/rlx/bsp/vmlinux.lds.S b/target/linux/realtek/files/arch/rlx/bsp/vmlinux.lds.S
deleted file mode 100644
index 80048359f..000000000
--- a/target/linux/realtek/files/arch/rlx/bsp/vmlinux.lds.S
+++ /dev/null
@@ -1,296 +0,0 @@
-#include <asm/asm-offsets.h>
-#include <asm-generic/vmlinux.lds.h>
-
-#undef mips
-#define mips mips
-OUTPUT_ARCH(mips)
-ENTRY(kernel_entry)
-PHDRS {
- text PT_LOAD FLAGS(7); /* RWX */
- note PT_NOTE FLAGS(4); /* R__ */
-}
-jiffies = JIFFIES;
-
-SECTIONS
-{
- . = LOADADDR;
- /* read-only */
- _text = .; /* Text and read-only data */
- .text : {
- TEXT_TEXT
- SCHED_TEXT
- LOCK_TEXT
- KPROBES_TEXT
- *(.text.*)
- *(.fixup)
- *(.gnu.warning)
-/*#ifdef CONFIG_RTL8192SE*/
-#if 1
- /* start of wlan f/w definition */
- __fw_start = . ;
- *(.rtl8192sfw.bin)
- __fw_end = . ;
-
- __AGC_TAB_start = . ;
- *(.AGC_TAB.txt)
- __AGC_TAB_end = . ;
-
- __phy_reg_start = . ;
- *(.phy_reg.txt)
- __phy_reg_end = . ;
-
- __phy_reg_MP_start = . ;
- *(.phy_reg_MP.txt)
- __phy_reg_MP_end = . ;
-
- __MACPHY_REG_start = . ;
- *(.MACPHY_REG.txt)
- __MACPHY_REG_end = . ;
-
- __radio_a_start = . ;
- *(.radio_a.txt)
- __radio_a_end = . ;
-
- __radio_b_start = . ;
- *(.radio_b.txt)
- __radio_b_end = . ;
-
- __PHY_REG_PG_start = .;
- *(.PHY_REG_PG.txt)
- __PHY_REG_PG_end = .;
-
- __PHY_to1T2R_start = .;
- *(.PHY_to1T2R.txt)
- __PHY_to1T2R_end = .;
-
- __PHY_to1T2R_b_start = .;
- *(.PHY_to1T2R_b.txt)
- __PHY_to1T2R_b_end = .;
-
- __PHY_to1T1R_start = .;
- *(.PHY_to1T1R.txt)
- __PHY_to1T1R_end = .;
-
- __PHY_to1T1R_b_start = .;
- *(.PHY_to1T1R_b.txt)
- __PHY_to1T1R_b_end = .;
-
- __radio_a_hp_start = . ;
- *(.radio_a_hp.txt)
- __radio_a_hp_end = . ;
-
- /* end of wlan f/w definition */
-#endif
-
- } :text = 0
- _etext = .; /* End of text section */
-
- /* Exception table */
- . = ALIGN(16);
- __ex_table : {
- __start___ex_table = .;
- *(__ex_table)
- __stop___ex_table = .;
- }
-
- /* Exception table for data bus errors */
- __dbe_table : {
- __start___dbe_table = .;
- *(__dbe_table)
- __stop___dbe_table = .;
- }
-
- . = ALIGN(16384);
- __iram = . ;
- .iram :
- {
- *(.iram-gen) /* general usage (essential) */
- *(.iram-fwd) /* general packet forwarding used */
- *(.iram-rtkwlan) /* realtek wlan driver */
- *(.iram-l2-fwd) /* L2 packet forwarding */
- *(.iram-l34-fwd) /* L34 packet forwarding */
- *(.iram-tx) /* protocol stack TX */
- *(.iram-extdev) /* ROMEDRV extension device fwd */
- *(.iram-crypto) /* authetication / crypto-engine */
- *(.iram-voip) /* voip */
- *(.iram) /* other usage */
- *(.iram.1)
- }
-
- . = ALIGN(8192);
- __dram = . ;
- __dram_start = . ;
- .dram :
- {
- *(.dram-wapi) /*wapi encryption/decryption used*/
- *(.dram-gen) /* general usage (essential) */
- *(.dram-fwd) /* general packet forwarding used */
- *(.dram-l2-fwd) /* L2 packet forwarding */
- *(.dram-l34-fwd) /* L34 packet forwarding */
- *(.dram-extdev) /* ROMEDRV extension device fwd */
- *(.dram-rtkwlan) /* realtek wlan driver */
- *(.dram-crypto) /* authetication / crypto-engine */
- *(.dram-voip) /* voip */
- *(.dram-tx) /* protocol stack TX */
- *(.dram) /* other usage */
- *(.dram.1)
- }
- . = ALIGN(8192);
- __dram_end = . ;
-
- NOTES :text :note
- .dummy : { *(.dummy) } :text
-
- RODATA
-
- /* writeable */
- .data : { /* Data */
- . = . + DATAOFFSET; /* for CONFIG_MAPPED_KERNEL */
- /*
- * This ALIGN is needed as a workaround for a bug a
- * gcc bug upto 4.1 which limits the maximum alignment
- * to at most 32kB and results in the following
- * warning:
- *
- * CC arch/mips/kernel/init_task.o
- * arch/mips/kernel/init_task.c:30: warning: alignment
- * of ‘init_thread_union�is greater than maximum
- * object file alignment. Using 32768
- */
- . = ALIGN(_PAGE_SIZE);
- *(.data.init_task)
-
- DATA_DATA
- CONSTRUCTORS
- }
- _gp = . + 0x8000;
- .lit8 : {
- *(.lit8)
- }
- .lit4 : {
- *(.lit4)
- }
- /* We want the small data sections together, so single-instruction offsets
- can access them all, and initialized data all before uninitialized, so
- we can shorten the on-disk segment size. */
- .sdata : {
- *(.sdata)
- }
-
- . = ALIGN(_PAGE_SIZE);
- .data_nosave : {
- __nosave_begin = .;
- *(.data.nosave)
- }
- . = ALIGN(_PAGE_SIZE);
- __nosave_end = .;
-
- . = ALIGN(1 << 5);
- .data.cacheline_aligned : {
- *(.data.cacheline_aligned)
- }
- _edata = .; /* End of data section */
-
- /* will be freed after init */
- . = ALIGN(_PAGE_SIZE); /* Init code and data */
- __init_begin = .;
- .init.text : {
- _sinittext = .;
- INIT_TEXT
- _einittext = .;
- }
- .init.data : {
- INIT_DATA
- }
- . = ALIGN(16);
- .init.setup : {
- __setup_start = .;
- *(.init.setup)
- __setup_end = .;
- }
-
- .initcall.init : {
- __initcall_start = .;
- INITCALLS
- __initcall_end = .;
- }
-
- .con_initcall.init : {
- __con_initcall_start = .;
- *(.con_initcall.init)
- __con_initcall_end = .;
- }
- SECURITY_INIT
-
- /* .exit.text is discarded at runtime, not link time, to deal with
- * references from .rodata
- */
- .exit.text : {
- EXIT_TEXT
- }
- .exit.data : {
- EXIT_DATA
- }
-#if defined(CONFIG_BLK_DEV_INITRD)
- . = ALIGN(_PAGE_SIZE);
- .init.ramfs : {
- __initramfs_start = .;
- *(.init.ramfs)
- __initramfs_end = .;
- }
-#endif
- PERCPU(_PAGE_SIZE)
- . = ALIGN(_PAGE_SIZE);
- __init_end = .;
- /* freed after init ends here */
-
- __bss_start = .; /* BSS */
- .sbss : {
- *(.sbss)
- *(.scommon)
- }
- .bss : {
- *(.bss)
- *(COMMON)
- }
- __bss_stop = .;
-
- _end = . ;
-
- /* Sections to be discarded */
- /DISCARD/ : {
- *(.exitcall.exit)
-
- /* ABI crap starts here */
- *(.MIPS.options)
- *(.options)
- *(.pdr)
- *(.reginfo)
- }
-
- /* These mark the ABI of the kernel for debuggers. */
- .mdebug.abi32 : {
- KEEP(*(.mdebug.abi32))
- }
- .mdebug.abi64 : {
- KEEP(*(.mdebug.abi64))
- }
-
- /* This is the MIPS specific mdebug section. */
- .mdebug : {
- *(.mdebug)
- }
-
- STABS_DEBUG
- DWARF_DEBUG
-
- /* These must appear regardless of . */
- .gptab.sdata : {
- *(.gptab.data)
- *(.gptab.sdata)
- }
- .gptab.sbss : {
- *(.gptab.bss)
- *(.gptab.sbss)
- }
-}