Renumbered the fsg patch into nslu2-linux managed numbering area

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10167 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 294 insertions, 38 deletions

diff --git a/target/linux/ixp4xx/patches-2.6.23/105-ixp4xx_fsg_board_support.patch b/target/linux/ixp4xx/patches-2.6.23/030-ixp4xx_fsg_board_support.patch
index 668416f29..a5997f8c3 100644
--- a/target/linux/ixp4xx/patches-2.6.23/105-ixp4xx_fsg_board_support.patch
+++ b/target/linux/ixp4xx/patches-2.6.23/030-ixp4xx_fsg_board_support.patch
@@ -302,7 +302,7 @@ Index: linux-2.6.23.12-armeb/arch/arm/mach-ixp4xx/fsg-setup.c
 Index: linux-2.6.23.12-armeb/arch/arm/mach-ixp4xx/Kconfig
 ===================================================================
 --- linux-2.6.23.12-armeb.orig/arch/arm/mach-ixp4xx/Kconfig	2008-01-09 12:49:04.000000000 +1030
-+++ linux-2.6.23.12-armeb/arch/arm/mach-ixp4xx/Kconfig	2008-01-09 12:49:07.000000000 +1030
++++ linux-2.6.23.12-armeb/arch/arm/mach-ixp4xx/Kconfig	2008-01-11 13:24:01.000000000 +1030
 @@ -125,6 +125,15 @@
  	depends on ARCH_IXDP425 || MACH_IXDP465 || MACH_KIXRP435
  	default y
@@ -313,7 +313,7 @@ Index: linux-2.6.23.12-armeb/arch/arm/mach-ixp4xx/Kconfig
 +	select PCI
 +	help
 +	  Say 'Y' here if you want your kernel to support Freecom's
-+	  FSG-3 device. For more information on this platform
++	  FSG-3 device. For more information on this platform,
 +	  see http://www.nslu2-linux.org/wiki/FSG3/HomePage
 +
  #
@@ -342,8 +342,8 @@ Index: linux-2.6.23.12-armeb/arch/arm/mach-ixp4xx/Makefile
 Index: linux-2.6.23.12-armeb/include/asm-arm/arch-ixp4xx/fsg.h
 ===================================================================
 --- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.23.12-armeb/include/asm-arm/arch-ixp4xx/fsg.h	2008-01-09 12:49:07.000000000 +1030
-@@ -0,0 +1,74 @@
++++ linux-2.6.23.12-armeb/include/asm-arm/arch-ixp4xx/fsg.h	2008-01-11 13:29:42.000000000 +1030
+@@ -0,0 +1,58 @@
 +/*
 + * include/asm-arm/arch-ixp4xx/fsg.h
 + *
@@ -396,28 +396,12 @@ Index: linux-2.6.23.12-armeb/include/asm-arm/arch-ixp4xx/fsg.h
 +
 +/* LEDs */
 +
-+#define FSG_LED_RING_GPIO	0
-+#define FSG_LED_SYNC_GPIO	1
-+#define FSG_LED_USB_GPIO	2
-+#define FSG_LED_SATA_GPIO	3
-+#define FSG_LED_WAN_GPIO	4
-+#define FSG_LED_WLAN_GPIO	5
-+
-+/* %%% REMOVE %%%
-+#define FSG_PCI_SLOT0_PIN	6
-+#define FSG_PCI_SLOT1_PIN	7
-+
-+#define	FSG_PCI_SLOT0_DEVID	14
-+#define	FSG_PCI_SLOT1_DEVID	15
-+
-+#define	FSG_IDE_BASE_PHYS	IXP4XX_EXP_BUS_BASE(3)
-+#define	FSG_IDE_BASE_VIRT	0xFFFE1000
-+#define	FSG_IDE_REGION_SIZE	0x1000
-+
-+#define	FSG_IDE_DATA_PORT	0xFFFE10E0
-+#define	FSG_IDE_CTRL_PORT	0xFFFE10FC
-+#define	FSG_IDE_ERROR_PORT	0xFFFE10E2
-+*/
++#define FSG_LED_WLAN_BIT	0
++#define FSG_LED_WAN_BIT		1
++#define FSG_LED_SATA_BIT	2
++#define FSG_LED_USB_BIT		4
++#define FSG_LED_RING_BIT	5
++#define FSG_LED_SYNC_BIT	7
 Index: linux-2.6.23.12-armeb/include/asm-arm/arch-ixp4xx/hardware.h
 ===================================================================
 --- linux-2.6.23.12-armeb.orig/include/asm-arm/arch-ixp4xx/hardware.h	2008-01-09 12:49:04.000000000 +1030
@@ -432,8 +416,8 @@ Index: linux-2.6.23.12-armeb/include/asm-arm/arch-ixp4xx/hardware.h
 Index: linux-2.6.23.12-armeb/include/asm-arm/arch-ixp4xx/irqs.h
 ===================================================================
 --- linux-2.6.23.12-armeb.orig/include/asm-arm/arch-ixp4xx/irqs.h	2008-01-09 12:49:04.000000000 +1030
-+++ linux-2.6.23.12-armeb/include/asm-arm/arch-ixp4xx/irqs.h	2008-01-09 12:49:07.000000000 +1030
-@@ -128,4 +128,17 @@
++++ linux-2.6.23.12-armeb/include/asm-arm/arch-ixp4xx/irqs.h	2008-01-11 13:30:09.000000000 +1030
+@@ -128,4 +128,11 @@
  #define        IRQ_DSMG600_PCI_INTE    IRQ_IXP4XX_GPIO7
  #define        IRQ_DSMG600_PCI_INTF    IRQ_IXP4XX_GPIO6
  
@@ -444,18 +428,12 @@ Index: linux-2.6.23.12-armeb/include/asm-arm/arch-ixp4xx/irqs.h
 +#define        IRQ_FSG_PCI_INTB        IRQ_IXP4XX_GPIO7
 +#define        IRQ_FSG_PCI_INTC        IRQ_IXP4XX_GPIO5
 +
-+/* %%% REMOVE %%%
-+#define	IRQ_FSG_PCI_SLOT0	IRQ_IXP4XX_GPIO6
-+#define	IRQ_FSG_PCI_SLOT1	IRQ_IXP4XX_GPIO7
-+#define	IRQ_FSG_IDE		IRQ_IXP4XX_GPIO5
-+*/
-+
  #endif
 Index: linux-2.6.23.12-armeb/arch/arm/mach-ixp4xx/fsg-power.c
 ===================================================================
 --- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.23.12-armeb/arch/arm/mach-ixp4xx/fsg-power.c	2008-01-09 12:49:07.000000000 +1030
-@@ -0,0 +1,87 @@
++++ linux-2.6.23.12-armeb/arch/arm/mach-ixp4xx/fsg-power.c	2008-01-11 12:47:50.000000000 +1030
+@@ -0,0 +1,88 @@
 +/*
 + * arch/arm/mach-ixp4xx/fsg-power.c
 + *
@@ -474,9 +452,10 @@ Index: linux-2.6.23.12-armeb/arch/arm/mach-ixp4xx/fsg-power.c
 +
 +#include <linux/module.h>
 +#include <linux/reboot.h>
-+#include <linux/irq.h>
 +#include <linux/interrupt.h>
-+#include <linux/kernel.h>
++#include <linux/irq.h>
++#include <linux/jiffies.h>
++#include <linux/timer.h>
 +
 +#include <asm/mach-types.h>
 +
@@ -543,3 +522,280 @@ Index: linux-2.6.23.12-armeb/arch/arm/mach-ixp4xx/fsg-power.c
 +MODULE_AUTHOR("Rod Whitby <rod@whitby.id.au>");
 +MODULE_DESCRIPTION("FSG Power/Reset driver");
 +MODULE_LICENSE("GPL");
+Index: linux-2.6.23.12-armeb/drivers/leds/Kconfig
+===================================================================
+--- linux-2.6.23.12-armeb.orig/drivers/leds/Kconfig	2008-01-11 13:30:47.000000000 +1030
++++ linux-2.6.23.12-armeb/drivers/leds/Kconfig	2008-01-11 13:34:34.000000000 +1030
+@@ -48,6 +48,12 @@
+ 	  particular board must have LEDs and they must be connected
+ 	  to the GPIO lines.  If unsure, say Y.
+ 
++config LEDS_FSG
++	tristate "LED Support for the Freecom FSG-3"
++	depends on LEDS_CLASS && MACH_FSG
++	help
++	  This option enables support for the LEDs on the Freecom FSG-3.
++
+ config LEDS_TOSA
+ 	tristate "LED Support for the Sharp SL-6000 series"
+ 	depends on LEDS_CLASS && PXA_SHARPSL
+Index: linux-2.6.23.12-armeb/drivers/leds/Makefile
+===================================================================
+--- linux-2.6.23.12-armeb.orig/drivers/leds/Makefile	2008-01-11 13:30:50.000000000 +1030
++++ linux-2.6.23.12-armeb/drivers/leds/Makefile	2008-01-11 13:34:34.000000000 +1030
+@@ -9,6 +9,7 @@
+ obj-$(CONFIG_LEDS_LOCOMO)		+= leds-locomo.o
+ obj-$(CONFIG_LEDS_SPITZ)		+= leds-spitz.o
+ obj-$(CONFIG_LEDS_IXP4XX)		+= leds-ixp4xx-gpio.o
++obj-$(CONFIG_LEDS_FSG)			+= leds-fsg.o
+ obj-$(CONFIG_LEDS_TOSA)			+= leds-tosa.o
+ obj-$(CONFIG_LEDS_S3C24XX)		+= leds-s3c24xx.o
+ obj-$(CONFIG_LEDS_AMS_DELTA)		+= leds-ams-delta.o
+Index: linux-2.6.23.12-armeb/drivers/leds/leds-fsg.c
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.23.12-armeb/drivers/leds/leds-fsg.c	2008-01-11 13:34:34.000000000 +1030
+@@ -0,0 +1,243 @@
++/*
++ * LED Driver for the Freecom FSG-3
++ *
++ * Copyright (c) 2008 Rod Whitby <rod@whitby.id.au>
++ *
++ * Author: Rod Whitby <rod@whitby.id.au>
++ *
++ * Based on leds-spitz.c
++ * Copyright 2005-2006 Openedhand Ltd.
++ * Author: Richard Purdie <rpurdie@openedhand.com>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/platform_device.h>
++#include <linux/leds.h>
++#include <asm/arch/hardware.h>
++#include <asm/io.h>
++
++static short __iomem *latch_address;
++static unsigned short latch_value;
++
++
++static void fsg_led_wlan_set(struct led_classdev *led_cdev, enum led_brightness value)
++{
++	if (value) {
++		latch_value &= ~(1 << FSG_LED_WLAN_BIT);
++		*latch_address = latch_value;
++	}
++	else {
++		latch_value |=  (1 << FSG_LED_WLAN_BIT);
++		*latch_address = latch_value;
++	}
++}
++
++static void fsg_led_wan_set(struct led_classdev *led_cdev, enum led_brightness value)
++{
++	if (value) {
++		latch_value &= ~(1 << FSG_LED_WAN_BIT);
++		*latch_address = latch_value;
++	}
++	else {
++		latch_value |=  (1 << FSG_LED_WAN_BIT);
++		*latch_address = latch_value;
++	}
++}
++
++static void fsg_led_sata_set(struct led_classdev *led_cdev, enum led_brightness value)
++{
++	if (value) {
++		latch_value &= ~(1 << FSG_LED_SATA_BIT);
++		*latch_address = latch_value;
++	}
++	else {
++		latch_value |=  (1 << FSG_LED_SATA_BIT);
++		*latch_address = latch_value;
++	}
++}
++
++static void fsg_led_usb_set(struct led_classdev *led_cdev, enum led_brightness value)
++{
++	if (value) {
++		latch_value &= ~(1 << FSG_LED_USB_BIT);
++		*latch_address = latch_value;
++	}
++	else {
++		latch_value |=  (1 << FSG_LED_USB_BIT);
++		*latch_address = latch_value;
++	}
++}
++
++static void fsg_led_sync_set(struct led_classdev *led_cdev, enum led_brightness value)
++{
++	if (value) {
++		latch_value &= ~(1 << FSG_LED_SYNC_BIT);
++		*latch_address = latch_value;
++	}
++	else {
++		latch_value |=  (1 << FSG_LED_SYNC_BIT);
++		*latch_address = latch_value;
++	}
++}
++
++static void fsg_led_ring_set(struct led_classdev *led_cdev, enum led_brightness value)
++{
++	if (value) {
++		latch_value &= ~(1 << FSG_LED_RING_BIT);
++		*latch_address = latch_value;
++	}
++	else {
++		latch_value |=  (1 << FSG_LED_RING_BIT);
++		*latch_address = latch_value;
++	}
++}
++
++
++
++static struct led_classdev fsg_wlan_led = {
++	.name			= "fsg:wlan",
++	.brightness_set		= fsg_led_wlan_set,
++};
++
++static struct led_classdev fsg_wan_led = {
++	.name			= "fsg:wan",
++	.brightness_set		= fsg_led_wan_set,
++};
++
++static struct led_classdev fsg_sata_led = {
++	.name			= "fsg:sata",
++	.brightness_set		= fsg_led_sata_set,
++};
++
++static struct led_classdev fsg_usb_led = {
++	.name			= "fsg:usb",
++	.brightness_set		= fsg_led_usb_set,
++};
++
++static struct led_classdev fsg_sync_led = {
++	.name			= "fsg:sync",
++	.brightness_set		= fsg_led_sync_set,
++};
++
++static struct led_classdev fsg_ring_led = {
++	.name			= "fsg:ring",
++	.brightness_set		= fsg_led_ring_set,
++};
++
++
++
++#ifdef CONFIG_PM
++static int fsg_led_suspend(struct platform_device *dev, pm_message_t state)
++{
++	led_classdev_suspend(&fsg_wlan_led);
++	led_classdev_suspend(&fsg_wan_led);
++	led_classdev_suspend(&fsg_sata_led);
++	led_classdev_suspend(&fsg_usb_led);
++	led_classdev_suspend(&fsg_sync_led);
++	led_classdev_suspend(&fsg_ring_led);
++	return 0;
++}
++
++static int fsg_led_resume(struct platform_device *dev)
++{
++	led_classdev_resume(&fsg_wlan_led);
++	led_classdev_resume(&fsg_wan_led);
++	led_classdev_resume(&fsg_sata_led);
++	led_classdev_resume(&fsg_usb_led);
++	led_classdev_resume(&fsg_sync_led);
++	led_classdev_resume(&fsg_ring_led);
++	return 0;
++}
++#endif
++
++
++static int fsg_led_probe(struct platform_device *pdev)
++{
++	int ret;
++
++	/* FIXME: Need to work out how to handle failure below */
++
++	ret = led_classdev_register(&pdev->dev, &fsg_wlan_led);
++	if (ret < 0)
++		return ret;
++
++	ret = led_classdev_register(&pdev->dev, &fsg_wan_led);
++	if (ret < 0)
++		return ret;
++
++	ret = led_classdev_register(&pdev->dev, &fsg_sata_led);
++	if (ret < 0)
++		return ret;
++
++	ret = led_classdev_register(&pdev->dev, &fsg_usb_led);
++	if (ret < 0)
++		return ret;
++
++	ret = led_classdev_register(&pdev->dev, &fsg_sync_led);
++	if (ret < 0)
++		return ret;
++
++	ret = led_classdev_register(&pdev->dev, &fsg_ring_led);
++	if (ret < 0)
++		return ret;
++
++	return ret;
++}
++
++static int fsg_led_remove(struct platform_device *pdev)
++{
++	led_classdev_unregister(&fsg_wlan_led);
++	led_classdev_unregister(&fsg_wan_led);
++	led_classdev_unregister(&fsg_sata_led);
++	led_classdev_unregister(&fsg_usb_led);
++	led_classdev_unregister(&fsg_sync_led);
++	led_classdev_unregister(&fsg_ring_led);
++
++	return 0;
++}
++
++
++static struct platform_driver fsg_led_driver = {
++	.probe		= fsg_led_probe,
++	.remove		= fsg_led_remove,
++#ifdef CONFIG_PM
++	.suspend	= fsg_led_suspend,
++	.resume		= fsg_led_resume,
++#endif
++	.driver		= {
++		.name		= "fsg-led",
++	},
++};
++
++
++static int __init fsg_led_init(void)
++{
++	/* Map the LED chip select address space */
++	latch_address = (unsigned short *) ioremap(IXP4XX_EXP_BUS_BASE(2), 512);
++	if (!latch_address)
++		return -ENOMEM;
++	latch_value = 0xffff;
++	*latch_address = latch_value;
++	/* FIXME: We leak memory if the next line fails */
++	return platform_driver_register(&fsg_led_driver);
++}
++
++static void __exit fsg_led_exit(void)
++{
++ 	platform_driver_unregister(&fsg_led_driver);
++	iounmap(latch_address);
++}
++
++
++module_init(fsg_led_init);
++module_exit(fsg_led_exit);
++
++MODULE_AUTHOR("Rod Whitby <rod@whitby.id.au>");
++MODULE_DESCRIPTION("Freecom FSG-3 LED driver");
++MODULE_LICENSE("GPL");