path: root/target/linux/xburst/patches-2.6.35/021-add-n516-board-support.patch

From c260fa2e5fe9699824190555e075d6c1157d5f36 Mon Sep 17 00:00:00 2001
From: Lars-Peter Clausen <lars@metafoo.de>
Date: Sat, 24 Apr 2010 17:25:01 +0200
Subject: [PATCH] Add n516 board support

---
 arch/mips/include/asm/mach-jz4740/board-n516.h |   39 +++
 arch/mips/jz4740/Kconfig                       |    4 +
 arch/mips/jz4740/Makefile                      |    1 +
 arch/mips/jz4740/board-n516-display.c          |  394 ++++++++++++++++++++++++
 arch/mips/jz4740/board-n516.c                  |  203 ++++++++++++
 5 files changed, 641 insertions(+), 0 deletions(-)
 create mode 100644 arch/mips/include/asm/mach-jz4740/board-n516.h
 create mode 100644 arch/mips/jz4740/board-n516-display.c
 create mode 100644 arch/mips/jz4740/board-n516.c

--- /dev/null
+++ b/arch/mips/include/asm/mach-jz4740/board-n516.h
@@ -0,0 +1,39 @@
+/*
+ *  linux/include/asm-mips/mach-jz4740/board-n516.h
+ *
+ *  JZ4730-based N516 board definition.
+ *
+ *  Copyright (C) 2009, Yauhen Kharuzhy <jekhor@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __ASM_JZ4740_N516_H__
+#define __ASM_JZ4740_N516_H__
+
+#include <asm/mach-jz4740/gpio.h>
+
+/*
+ * GPIO
+ */
+#define GPIO_SD_VCC_EN_N	JZ_GPIO_PORTD(17)
+#define GPIO_SD_CD_N		JZ_GPIO_PORTD(7)
+#define GPIO_SD_WP		JZ_GPIO_PORTD(15)
+#define GPIO_USB_DETECT		JZ_GPIO_PORTD(19)
+#define GPIO_CHARG_STAT_N	JZ_GPIO_PORTD(16)
+#define GPIO_LED_ENABLE		JZ_GPIO_PORTD(28)
+#define GPIO_LPC_INT		JZ_GPIO_PORTD(14)
+#define GPIO_HPHONE_DETECT	JZ_GPIO_PORTD(20)
+#define GPIO_SPEAKER_ENABLE	JZ_GPIO_PORTD(21)
+
+/* Display */
+#define GPIO_DISPLAY_RST_L	JZ_GPIO_PORTB(18)
+#define GPIO_DISPLAY_RDY	JZ_GPIO_PORTB(17)
+#define GPIO_DISPLAY_STBY	JZ_GPIO_PORTC(22)
+#define GPIO_DISPLAY_ERR	JZ_GPIO_PORTC(23)
+#define GPIO_DISPLAY_OFF_N	JZ_GPIO_PORTD(1)
+
+#endif /* __ASM_JZ4740_N516_H__ */
--- a/arch/mips/jz4740/Kconfig
+++ b/arch/mips/jz4740/Kconfig
@@ -6,6 +6,10 @@ choice
 config JZ4740_QI_LB60
 	bool "Qi Hardware Ben NanoNote"
 
+config JZ4740_N516
+	bool "Hanvon n516 eBook reader"
+	select SOC_JZ4740
+
 endchoice
 
 config HAVE_PWM
--- a/arch/mips/jz4740/Makefile
+++ b/arch/mips/jz4740/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_DEBUG_FS) += clock-debugfs.
 # board specific support
 
 obj-$(CONFIG_JZ4740_QI_LB60)	+= board-qi_lb60.o
+obj-$(CONFIG_JZ4740_N516)	+= board-n516.o board-n516-display.o
 
 # PM support
 
--- /dev/null
+++ b/arch/mips/jz4740/board-n516-display.c
@@ -0,0 +1,394 @@
+/*
+ * board-n516-display.c -- Platform device for N516 display
+ *
+ * Copyright (C) 2009, Yauhen Kharuzhy <jekhor@gmail.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+
+#include <asm/mach-jz4740/jz4740_fb.h>
+
+#include <asm/mach-jz4740/platform.h>
+#include <asm/mach-jz4740/board-n516.h>
+
+#include <video/metronomefb.h>
+#include <linux/console.h>
+
+static struct fb_videomode n516_fb_modes[] = {
+	[0] = {
+		.name		= "Metronome 800x600",
+		.refresh	= 50,
+		.xres		= 400,
+		.yres		= 624,
+		.hsync_len	= 31,
+		.vsync_len	= 23,
+		.right_margin	= 31,
+		.left_margin	= 5,
+		.upper_margin	= 1,
+		.lower_margin	= 2,
+		.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+	},
+};
+
+static struct jz4740_fb_platform_data n516_fb_pdata = {
+	.num_modes	= ARRAY_SIZE(n516_fb_modes),
+	.modes		= n516_fb_modes,
+	.bpp		= 16,
+	.lcd_type	= JZ_LCD_TYPE_GENERIC_16_BIT,
+};
+
+struct n516_board_info {
+	uint8_t *metromem;
+	size_t wfm_size;
+	struct fb_info *host_fbinfo; /* the host LCD controller's fbi */
+	unsigned int fw;
+	unsigned int fh;
+};
+
+static struct platform_device *n516_device;
+static struct n516_board_info n516_board_info;
+
+static int metronome_gpios[] = {
+	GPIO_DISPLAY_STBY,
+	GPIO_DISPLAY_RST_L,
+	GPIO_DISPLAY_RDY,
+	GPIO_DISPLAY_ERR,
+/*	GPIO_DISPLAY_OFF_N,*/
+};
+
+static const char *metronome_gpio_names[] = {
+	"Metronome STDBY",
+	"Metronome RST",
+	"Metronome RDY",
+	"Metronome ERR",
+/*	"Metronone OFF",*/
+};
+
+static int n516_enable_hostfb(bool enable)
+{
+	int ret;
+	int blank = enable ? FB_BLANK_UNBLANK : FB_BLANK_POWERDOWN;
+
+	acquire_console_sem();
+	ret = fb_blank(n516_board_info.host_fbinfo, blank);
+	release_console_sem();
+
+	return ret;
+}
+
+static int n516_init_metronome_gpios(struct metronomefb_par *par)
+{
+	int i;
+	int ret;
+
+	for (i = 0; i < ARRAY_SIZE(metronome_gpios); ++i) {
+		ret = gpio_request(metronome_gpios[i], metronome_gpio_names[i]);
+		if (ret)
+			goto err;
+	}
+
+	gpio_direction_output(GPIO_DISPLAY_OFF_N, 0);
+	gpio_direction_output(GPIO_DISPLAY_RST_L, 0);
+	gpio_direction_output(GPIO_DISPLAY_STBY, 0);
+	gpio_direction_input(GPIO_DISPLAY_RDY);
+	gpio_direction_input(GPIO_DISPLAY_ERR);
+
+	return 0;
+err:
+	for (--i; i >= 0; --i)
+		gpio_free(metronome_gpios[i]);
+
+	return ret;
+}
+
+static int n516_share_video_mem(struct fb_info *info)
+{
+	int ret;
+
+	dev_dbg(&n516_device->dev, "ENTER %s\n", __func__);
+	dev_dbg(&n516_device->dev, "%s, info->var.xres = %u, info->var.yres = %u\n", __func__, info->var.xres, info->var.yres);
+	/* rough check if this is our desired fb and not something else */
+	if ((info->var.xres != n516_fb_pdata.modes[0].xres)
+		|| (info->var.yres != n516_fb_pdata.modes[0].yres))
+		return 0;
+
+	/* we've now been notified that we have our new fb */
+	n516_board_info.metromem = info->screen_base;
+	n516_board_info.host_fbinfo = info;
+
+	n516_enable_hostfb(false);
+	/* try to refcount host drv since we are the consumer after this */
+	if (!try_module_get(info->fbops->owner))
+		return -ENODEV;
+
+	/* this _add binds metronomefb to n516. metronomefb refcounts n516 */
+	ret = platform_device_add(n516_device);
+
+	if (ret) {
+		platform_device_put(n516_device);
+		return ret;
+	}
+
+	/* request our platform independent driver */
+	request_module("metronomefb");
+
+	return 0;
+}
+
+static int n516_unshare_video_mem(struct fb_info *info)
+{
+	dev_dbg(&n516_device->dev, "ENTER %s\n", __func__);
+
+	if (info != n516_board_info.host_fbinfo)
+		return 0;
+
+	module_put(n516_board_info.host_fbinfo->fbops->owner);
+	return 0;
+}
+
+static int n516_fb_notifier_callback(struct notifier_block *self,
+				 unsigned long event, void *data)
+{
+	struct fb_event *evdata = data;
+	struct fb_info *info = evdata->info;
+
+	dev_dbg(&n516_device->dev, "ENTER %s\n", __func__);
+
+	if (event == FB_EVENT_FB_REGISTERED)
+		return n516_share_video_mem(info);
+	else if (event == FB_EVENT_FB_UNREGISTERED)
+		return n516_unshare_video_mem(info);
+
+	return 0;
+}
+
+static struct notifier_block n516_fb_notif = {
+	.notifier_call = n516_fb_notifier_callback,
+};
+
+/* this gets called as part of our init. these steps must be done now so
+ * that we can use set_pxa_fb_info */
+static void __init n516_presetup_fb(void)
+{
+	int padding_size;
+	int totalsize;
+
+	/* the frame buffer is divided as follows:
+	command | CRC | padding
+	16kb waveform data | CRC | padding
+	image data | CRC
+	*/
+
+	n516_board_info.fw = 800;
+	n516_board_info.fh = 624;
+
+	/* waveform must be 16k + 2 for checksum */
+	n516_board_info.wfm_size = roundup(16*1024 + 2, n516_board_info.fw);
+
+	padding_size = PAGE_SIZE + (4 * n516_board_info.fw);
+
+	/* total is 1 cmd , 1 wfm, padding and image */
+	totalsize = n516_board_info.fw + n516_board_info.wfm_size;
+	totalsize += padding_size + (n516_board_info.fw*n516_board_info.fh);
+
+	/* save this off because we're manipulating fw after this and
+	 * we'll need it when we're ready to setup the framebuffer */
+
+	/* the reason we do this adjustment is because we want to acquire
+	 * more framebuffer memory without imposing custom awareness on the
+	 * underlying driver */
+	n516_fb_pdata.modes[0].yres = DIV_ROUND_UP(totalsize, n516_board_info.fw);
+
+	jz4740_framebuffer_device.dev.platform_data = &n516_fb_pdata;
+	platform_device_register(&jz4740_framebuffer_device);
+}
+
+/* this gets called by metronomefb as part of its init, in our case, we
+ * have already completed initial framebuffer init in presetup_fb so we
+ * can just setup the fb access pointers */
+static int n516_setup_fb(struct metronomefb_par *par)
+{
+	/* metromem was set up by the notifier in share_video_mem so now
+	 * we can use its value to calculate the other entries */
+	par->metromem_cmd = (struct metromem_cmd *) n516_board_info.metromem;
+	par->metromem_wfm = n516_board_info.metromem + n516_board_info.fw;
+	par->metromem_img = par->metromem_wfm + n516_board_info.wfm_size;
+	par->metromem_img_csum = (u16 *) (par->metromem_img + (n516_board_info.fw * n516_board_info.fh));
+	par->metromem_dma = n516_board_info.host_fbinfo->fix.smem_start;
+
+	return 0;
+}
+
+static int n516_get_panel_type(void)
+{
+	return 5;
+}
+
+static irqreturn_t n516_handle_irq(int irq, void *dev_id)
+{
+	struct metronomefb_par *par = dev_id;
+
+	dev_dbg(&par->pdev->dev, "Metronome IRQ! RDY=%d\n", 	gpio_get_value(GPIO_DISPLAY_RDY));
+	wake_up_all(&par->waitq);
+
+	return IRQ_HANDLED;
+}
+
+static void n516_power_ctl(struct metronomefb_par *par, int cmd)
+{
+	switch (cmd) {
+	case METRONOME_POWER_OFF:
+		gpio_set_value(GPIO_DISPLAY_OFF_N, 1);
+		n516_enable_hostfb(false);
+		break;
+	case METRONOME_POWER_ON:
+		gpio_set_value(GPIO_DISPLAY_OFF_N, 0);
+		n516_enable_hostfb(true);
+		break;
+	}
+}
+
+static int n516_get_rdy(struct metronomefb_par *par)
+{
+	return gpio_get_value(GPIO_DISPLAY_RDY);
+}
+
+static int n516_get_err(struct metronomefb_par *par)
+{
+	return gpio_get_value(GPIO_DISPLAY_ERR);
+}
+
+static int n516_setup_irq(struct fb_info *info)
+{
+	int ret;
+
+	dev_dbg(&n516_device->dev, "ENTER %s\n", __func__);
+
+	ret = request_irq(gpio_to_irq(GPIO_DISPLAY_RDY), n516_handle_irq,
+				IRQF_TRIGGER_RISING,
+				"n516", info->par);
+	if (ret)
+		dev_err(&n516_device->dev, "request_irq failed: %d\n", ret);
+
+	return ret;
+}
+
+static void n516_set_rst(struct metronomefb_par *par, int state)
+{
+	dev_dbg(&n516_device->dev, "ENTER %s, RDY=%d\n", __func__, gpio_get_value(GPIO_DISPLAY_RDY));
+	if (state)
+		gpio_set_value(GPIO_DISPLAY_RST_L, 1);
+	else
+		gpio_set_value(GPIO_DISPLAY_RST_L, 0);
+}
+
+static void n516_set_stdby(struct metronomefb_par *par, int state)
+{
+	dev_dbg(&n516_device->dev, "ENTER %s, RDY=%d\n", __func__, gpio_get_value(GPIO_DISPLAY_RDY));
+	if (state)
+		gpio_set_value(GPIO_DISPLAY_STBY, 1);
+	else
+		gpio_set_value(GPIO_DISPLAY_STBY, 0);
+}
+
+static int n516_wait_event(struct metronomefb_par *par)
+{
+	unsigned long timeout = jiffies + HZ / 20;
+
+	dev_dbg(&n516_device->dev, "ENTER1 %s, RDY=%d\n",
+			__func__, gpio_get_value(GPIO_DISPLAY_RDY));
+	while (n516_get_rdy(par) && time_before(jiffies, timeout))
+		schedule();
+
+	dev_dbg(&n516_device->dev, "ENTER2 %s, RDY=%d\n",
+			__func__, gpio_get_value(GPIO_DISPLAY_RDY));
+	return wait_event_timeout(par->waitq,
+			n516_get_rdy(par), HZ * 2) ? 0 : -EIO;
+}
+
+static int n516_wait_event_intr(struct metronomefb_par *par)
+{
+	unsigned long timeout = jiffies + HZ/20;
+
+	dev_dbg(&n516_device->dev, "ENTER1 %s, RDY=%d\n",
+			__func__, gpio_get_value(GPIO_DISPLAY_RDY));
+	while (n516_get_rdy(par) && time_before(jiffies, timeout))
+		schedule();
+
+	dev_dbg(&n516_device->dev, "ENTER2 %s, RDY=%d\n",
+			__func__, gpio_get_value(GPIO_DISPLAY_RDY));
+	return wait_event_interruptible_timeout(par->waitq,
+					n516_get_rdy(par), HZ * 2) ? 0 : -EIO;
+}
+
+static void n516_cleanup(struct metronomefb_par *par)
+{
+	int i;
+
+	free_irq(gpio_to_irq(GPIO_DISPLAY_RDY), par);
+	for (i = 0; i < ARRAY_SIZE(metronome_gpios); ++i)
+		gpio_free(metronome_gpios[i]);
+}
+
+static struct metronome_board n516_board __initdata = {
+	.owner			= THIS_MODULE,
+	.power_ctl		= n516_power_ctl,
+	.setup_irq		= n516_setup_irq,
+	.setup_io		= n516_init_metronome_gpios,
+	.setup_fb		= n516_setup_fb,
+	.set_rst		= n516_set_rst,
+	.get_err		= n516_get_err,
+	.get_rdy		= n516_get_rdy,
+	.set_stdby		= n516_set_stdby,
+	.met_wait_event		= n516_wait_event,
+	.met_wait_event_intr	= n516_wait_event_intr,
+	.get_panel_type		= n516_get_panel_type,
+	.cleanup		= n516_cleanup,
+};
+
+static int __init n516_init(void)
+{
+	int ret;
+
+	/* Keep the metronome off, until its driver is loaded */
+	ret = gpio_request(GPIO_DISPLAY_OFF_N, "Display off");
+	if (ret)
+		return ret;
+
+	gpio_direction_output(GPIO_DISPLAY_OFF_N, 1);
+
+	/* before anything else, we request notification for any fb
+	 * creation events */
+	fb_register_client(&n516_fb_notif);
+
+	n516_device = platform_device_alloc("metronomefb", -1);
+	if (!n516_device)
+		return -ENOMEM;
+
+	/* the n516_board that will be seen by metronomefb is a copy */
+	platform_device_add_data(n516_device, &n516_board,
+					sizeof(n516_board));
+
+	n516_presetup_fb();
+
+	return 0;
+}
+module_init(n516_init);
+
+MODULE_DESCRIPTION("board driver for n516 display");
+MODULE_AUTHOR("Yauhen Kharuzhy");
+MODULE_LICENSE("GPL");
--- /dev/null
+++ b/arch/mips/jz4740/board-n516.c
@@ -0,0 +1,203 @@
+/*
+ * linux/arch/mips/jz4740/board-516.c
+ *
+ * JZ4740 n516 board setup routines.
+ *
+ * Copyright (c) 2009, Yauhen Kharuzhy <jekhor@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/ioport.h>
+#include <linux/mm.h>
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/leds.h>
+
+#include <linux/power_supply.h>
+#include <linux/power/gpio-charger.h>
+
+#include <linux/i2c.h>
+#include <linux/i2c-gpio.h>
+
+#include <asm/mach-jz4740/jz4740_mmc.h>
+#include <asm/mach-jz4740/jz4740_nand.h>
+
+#include <asm/mach-jz4740/board-n516.h>
+#include <asm/mach-jz4740/platform.h>
+
+#include "clock.h"
+
+static long n516_panic_blink(long time)
+{
+	gpio_set_value(GPIO_LED_ENABLE, 1);
+	mdelay(200);
+	gpio_set_value(GPIO_LED_ENABLE, 0);
+	mdelay(200);
+
+	return 400;
+}
+
+static void __init board_gpio_setup(void)
+{
+/*	jz_gpio_enable_pullup(JZ_GPIO_PORTD(23));
+	jz_gpio_enable_pullup(JZ_GPIO_PORTD(24));*/
+}
+
+static struct i2c_gpio_platform_data n516_i2c_pdata = {
+	.sda_pin = JZ_GPIO_PORTD(23),
+	.scl_pin = JZ_GPIO_PORTD(24),
+	.udelay = 2,
+	.timeout = 3 * HZ,
+};
+
+static struct platform_device n516_i2c_device = {
+	.name = "i2c-gpio",
+	.id = -1,
+	.dev = {
+		.platform_data = &n516_i2c_pdata,
+	},
+};
+
+static const struct i2c_board_info n516_i2c_board_info[] = {
+	{
+		.type		= "LPC524",
+		.addr		= 0x54,
+	},
+	{
+		.type		= "lm75a",
+		.addr		= 0x48,
+	}
+};
+
+static struct jz4740_mmc_platform_data n516_mmc_pdata = {
+	.gpio_card_detect	= GPIO_SD_CD_N,
+	.card_detect_active_low = 1,
+	.gpio_read_only		= -1,
+	.gpio_power		= GPIO_SD_VCC_EN_N,
+	.power_active_low = 1,
+};
+
+static struct gpio_led n516_leds[] = {
+	{
+		.name = "n516:blue:power",
+		.gpio = GPIO_LED_ENABLE,
+		.default_state = LEDS_GPIO_DEFSTATE_ON,
+		.default_trigger = "nand-disk",
+	}
+};
+
+static struct gpio_led_platform_data n516_leds_pdata = {
+	.leds = n516_leds,
+	.num_leds = ARRAY_SIZE(n516_leds),
+};
+
+static struct platform_device n516_leds_device = {
+	.name = "leds-gpio",
+	.id = -1,
+	.dev = {
+		.platform_data = &n516_leds_pdata,
+	},
+};
+
+static struct mtd_partition n516_partitions[] = {
+	{ .name = "NAND BOOT partition",
+	  .offset = 0 * 0x100000,
+	  .size = 4 * 0x100000,
+	},
+	{ .name = "NAND KERNEL partition",
+	  .offset = 4 * 0x100000,
+	  .size = 4 * 0x100000,
+ 	},
+	{ .name = "NAND ROOTFS partition",
+	  .offset = 8 * 0x100000,
+	  .size = 504 * 0x100000,
+ 	},
+};
+
+static struct nand_ecclayout n516_ecclayout = {
+/*	.eccbytes = 36,
+	.eccpos = {
+		 6,  7,  8,  9, 10, 11, 12, 13, 14,
+		15, 16, 17, 18, 19, 20, 21, 22, 23,
+		24, 25, 26, 27, 28, 29, 30, 31, 32,
+		33, 34, 35, 36, 37, 38, 39, 40, 41,
+	},*/
+	.oobfree = {
+		{
+			.offset = 2,
+			.length = 4
+		},
+		{
+			.offset = 42,
+			.length = 22,
+		}
+	}
+};
+
+static struct jz_nand_platform_data n516_nand_pdata = {
+	.ecc_layout = &n516_ecclayout,
+	.partitions = n516_partitions,
+	.num_partitions = ARRAY_SIZE(n516_partitions),
+	.busy_gpio = 94,
+};
+
+static char *n516_batteries[] = {
+	"n516_battery",
+};
+
+static struct gpio_charger_platform_data n516_charger_pdata = {
+	.name = "usb",
+	.type = POWER_SUPPLY_TYPE_USB,
+	.gpio = GPIO_USB_DETECT,
+	.gpio_active_low = 1,
+	.batteries = n516_batteries,
+	.num_batteries = ARRAY_SIZE(n516_batteries),
+};
+
+static struct platform_device n516_charger_device = {
+	.name = "gpio-charger",
+	.dev = {
+		.platform_data = &n516_charger_pdata,
+	},
+};
+
+static struct platform_device *n516_devices[] __initdata = {
+	&jz4740_nand_device,
+	&n516_leds_device,
+	&jz4740_mmc_device,
+	&jz4740_i2s_device,
+	&jz4740_codec_device,
+	&jz4740_rtc_device,
+	&jz4740_udc_device,
+	&n516_i2c_device,
+	&n516_charger_device,
+};
+
+struct jz4740_clock_board_data jz4740_clock_bdata = {
+	.ext_rate = 12000000,
+	.rtc_rate = 32768,
+};
+
+extern int jz_gpiolib_init(void);
+
+static int n516_setup_platform(void)
+{
+	board_gpio_setup();
+
+	panic_blink = n516_panic_blink;
+	i2c_register_board_info(0, n516_i2c_board_info, ARRAY_SIZE(n516_i2c_board_info));
+	jz4740_mmc_device.dev.platform_data = &n516_mmc_pdata;
+	jz4740_nand_device.dev.platform_data = &n516_nand_pdata;
+
+	return platform_add_devices(n516_devices, ARRAY_SIZE(n516_devices));
+}
+arch_initcall(n516_setup_platform);