path: root/target/linux/s3c24xx/patches-2.6.26/1048-fiq-hdq.patch.patch

From d183fa083737f2b042ecf92166951c30fd83fe61 Mon Sep 17 00:00:00 2001
From: mokopatches <mokopatches@openmoko.org>
Date: Fri, 25 Jul 2008 22:21:23 +0100
Subject: [PATCH] fiq-hdq.patch

---
 arch/arm/mach-s3c2440/mach-gta02.c           |  204 +++++++++++++++++++++-
 drivers/power/Kconfig                        |    8 +
 drivers/power/Makefile                       |    2 +
 drivers/power/gta02_hdq.c                    |  250 ++++++++++++++++++++++++++
 include/asm-arm/arch-s3c2410/fiq_ipc_gta02.h |   23 +++
 include/asm-arm/arch-s3c2410/gta02.h         |    1 +
 include/linux/gta02_hdq.h                    |    8 +
 7 files changed, 495 insertions(+), 1 deletions(-)
 create mode 100644 drivers/power/gta02_hdq.c
 create mode 100644 include/linux/gta02_hdq.h

diff --git a/arch/arm/mach-s3c2440/mach-gta02.c b/arch/arm/mach-s3c2440/mach-gta02.c
index 8c7bbe7..cea76e7 100644
--- a/arch/arm/mach-s3c2440/mach-gta02.c
+++ b/arch/arm/mach-s3c2440/mach-gta02.c
@@ -99,6 +99,19 @@ EXPORT_SYMBOL(fiq_ipc);
 
 #define FIQ_DIVISOR_VIBRATOR DIVISOR_FROM_US(100)
 
+#ifdef CONFIG_GTA02_HDQ
+/* HDQ specific */
+#define HDQ_SAMPLE_PERIOD_US 20
+/* private HDQ FSM state -- all other info interesting for caller in fiq_ipc */
+static enum hdq_bitbang_states hdq_state;
+static u8 hdq_ctr;
+static u8 hdq_ctr2;
+static u8 hdq_bit;
+static u8 hdq_shifter;
+static u8 hdq_tx_data_done;
+
+#define FIQ_DIVISOR_HDQ DIVISOR_FROM_US(HDQ_SAMPLE_PERIOD_US)
+#endif
 /* define FIQ ISR */
 
 FIQ_HANDLER_START()
@@ -121,9 +134,171 @@ FIQ_HANDLER_ENTRY(256, 512)
 		divisor = FIQ_DIVISOR_VIBRATOR;
 	}
 
-	/* TODO: HDQ servicing */
+#ifdef CONFIG_GTA02_HDQ
+	/* HDQ servicing */
+
+	switch (hdq_state) {
+	case HDQB_IDLE:
+		if (fiq_ipc.hdq_request_ctr == fiq_ipc.hdq_transaction_ctr)
+			break;
+		hdq_ctr = 210 / HDQ_SAMPLE_PERIOD_US;
+		s3c2410_gpio_setpin(fiq_ipc.hdq_gpio_pin, 0);
+		s3c2410_gpio_cfgpin(fiq_ipc.hdq_gpio_pin, S3C2410_GPIO_OUTPUT);
+		hdq_tx_data_done = 0;
+		hdq_state = HDQB_TX_BREAK;
+		break;
+
+	case HDQB_TX_BREAK: /* issue low for > 190us */
+		if (--hdq_ctr == 0) {
+			hdq_ctr = 60 / HDQ_SAMPLE_PERIOD_US;
+			hdq_state = HDQB_TX_BREAK_RECOVERY;
+			s3c2410_gpio_setpin(fiq_ipc.hdq_gpio_pin, 1);
+		}
+		break;
+
+	case HDQB_TX_BREAK_RECOVERY: /* issue low for > 40us */
+		if (--hdq_ctr)
+			break;
+		hdq_shifter = fiq_ipc.hdq_ads;
+		hdq_bit = 8; /* 8 bits of ads / rw */
+		hdq_tx_data_done = 0; /* doing ads */
+		/* fallthru on last one */
+	case HDQB_ADS_CALC:
+		if (hdq_shifter & 1)
+			hdq_ctr = 50 / HDQ_SAMPLE_PERIOD_US;
+		else
+			hdq_ctr = 120 / HDQ_SAMPLE_PERIOD_US;
+		/* carefully precompute the other phase length */
+		hdq_ctr2 = (210 - (hdq_ctr * HDQ_SAMPLE_PERIOD_US)) /
+				HDQ_SAMPLE_PERIOD_US;
+		hdq_state = HDQB_ADS_LOW;
+		hdq_shifter >>= 1;
+		hdq_bit--;
+		s3c2410_gpio_setpin(fiq_ipc.hdq_gpio_pin, 0);
+		break;
+
+	case HDQB_ADS_LOW:
+		if (--hdq_ctr)
+			break;
+		s3c2410_gpio_setpin(fiq_ipc.hdq_gpio_pin, 1);
+		hdq_state = HDQB_ADS_HIGH;
+		break;
+
+	case HDQB_ADS_HIGH:
+		if (--hdq_ctr2 > 1) /* account for HDQB_ADS_CALC */
+			break;
+		if (hdq_bit) { /* more bits to do */
+			hdq_state = HDQB_ADS_CALC;
+			break;
+		}
+		/* no more bits, wait it out until hdq_ctr2 exhausted */
+		if (hdq_ctr2)
+			break;
+		/* ok no more bits and very last state */
+		hdq_ctr = 60 / HDQ_SAMPLE_PERIOD_US;
+		/* FIXME 0 = read */
+		if (fiq_ipc.hdq_ads & 0x80) { /* write the byte out */
+			 /* set delay before payload */
+			hdq_ctr = 300 / HDQ_SAMPLE_PERIOD_US;
+ 			/* already high, no need to write */
+			hdq_state = HDQB_WAIT_TX;
+			break;
+		}
+		/* read the next byte */
+		hdq_bit = 8; /* 8 bits of data */
+		hdq_ctr = 3000 / HDQ_SAMPLE_PERIOD_US;
+		hdq_state = HDQB_WAIT_RX;
+		s3c2410_gpio_cfgpin(fiq_ipc.hdq_gpio_pin, S3C2410_GPIO_INPUT);
+		break;
+
+	case HDQB_WAIT_TX: /* issue low for > 40us */
+		if (--hdq_ctr)
+			break;
+		if (!hdq_tx_data_done) { /* was that the data sent? */
+			hdq_tx_data_done++;
+			hdq_shifter = fiq_ipc.hdq_tx_data;
+			hdq_bit = 8; /* 8 bits of data */
+			hdq_state = HDQB_ADS_CALC; /* start sending */
+			break;
+		}
+		fiq_ipc.hdq_error = 0;
+		fiq_ipc.hdq_transaction_ctr++;
+		hdq_state = HDQB_IDLE; /* all tx is done */
+		/* idle in input mode, it's pulled up by 10K */
+		s3c2410_gpio_cfgpin(fiq_ipc.hdq_gpio_pin, S3C2410_GPIO_INPUT);
+		break;
+
+	case HDQB_WAIT_RX: /* wait for battery to talk to us */
+		if (s3c2410_gpio_getpin(fiq_ipc.hdq_gpio_pin) == 0) {
+			/* it talks to us! */
+			hdq_ctr2 = 1;
+			hdq_bit = 8; /* 8 bits of data */
+			/* timeout */
+			hdq_ctr = 300 / HDQ_SAMPLE_PERIOD_US;
+			hdq_state = HDQB_DATA_RX_LOW;
+			break;
+		}
+		if (--hdq_ctr == 0) { /* timed out, error */
+			fiq_ipc.hdq_error = 1;
+			fiq_ipc.hdq_transaction_ctr++;
+			hdq_state = HDQB_IDLE; /* abort */
+		}
+		break;
+
+	/*
+	 * HDQ basically works by measuring the low time of the bit cell
+	 * 32-50us --> '1', 80 - 145us --> '0'
+	 */
+
+	case HDQB_DATA_RX_LOW:
+		if (s3c2410_gpio_getpin(fiq_ipc.hdq_gpio_pin)) {
+			fiq_ipc.hdq_rx_data >>= 1;
+			if (hdq_ctr2 <= (65 / HDQ_SAMPLE_PERIOD_US))
+				fiq_ipc.hdq_rx_data |= 0x80;
+
+			if (--hdq_bit == 0) {
+				fiq_ipc.hdq_error = 0;
+				fiq_ipc.hdq_transaction_ctr++; /* done */
+				hdq_state = HDQB_IDLE;
+			} else
+				hdq_state = HDQB_DATA_RX_HIGH;
+			/* timeout */
+			hdq_ctr = 1000 / HDQ_SAMPLE_PERIOD_US;
+			hdq_ctr2 = 1;
+			break;
+		}
+		hdq_ctr2++;
+		if (--hdq_ctr)
+			break;
+		 /* timed out, error */
+		fiq_ipc.hdq_error = 2;
+		fiq_ipc.hdq_transaction_ctr++;
+		hdq_state = HDQB_IDLE; /* abort */
+		break;
 
+	case HDQB_DATA_RX_HIGH:
+		if (!s3c2410_gpio_getpin(fiq_ipc.hdq_gpio_pin)) {
+			/* it talks to us! */
+			hdq_ctr2 = 1;
+			/* timeout */
+			hdq_ctr = 400 / HDQ_SAMPLE_PERIOD_US;
+			hdq_state = HDQB_DATA_RX_LOW;
+			break;
+		}
+		if (--hdq_ctr)
+			break;
+		/* timed out, error */
+		fiq_ipc.hdq_error = 3;
+		fiq_ipc.hdq_transaction_ctr++;
+		/* we're in input mode already */
+		hdq_state = HDQB_IDLE; /* abort */
+		break;
+	}
 
+	if (hdq_state != HDQB_IDLE) /* ie, not idle */
+		if (divisor > FIQ_DIVISOR_HDQ)
+			divisor = FIQ_DIVISOR_HDQ; /* keep us going */
+#endif
 
 	/* disable further timer interrupts if nobody has any work
 	 * or adjust rate according to who still has work
@@ -391,6 +566,23 @@ struct platform_device sc32440_fiq_device = {
 	.resource	= sc32440_fiq_resources,
 };
 
+#ifdef CONFIG_GTA02_HDQ
+/* HDQ */
+
+static struct resource gta02_hdq_resources[] = {
+	[0] = {
+		.start	= GTA02v5_GPIO_HDQ,
+		.end	= GTA02v5_GPIO_HDQ,
+	},
+};
+
+struct platform_device gta02_hdq_device = {
+	.name 		= "gta02-hdq",
+	.num_resources	= 1,
+	.resource	= gta02_hdq_resources,
+};
+#endif
+
 /* NOR Flash */
 
 #define GTA02_FLASH_BASE	0x18000000 /* GCS3 */
@@ -1074,6 +1266,16 @@ static void __init gta02_machine_init(void)
 
 	platform_add_devices(gta02_devices, ARRAY_SIZE(gta02_devices));
 
+#ifdef CONFIG_GTA02_HDQ
+	switch (system_rev) {
+	case GTA02v5_SYSTEM_REV:
+	case GTA02v6_SYSTEM_REV:
+		platform_device_register(&gta02_hdq_device);
+		break;
+	default:
+		break;
+	}
+#endif
 	s3c2410_pm_init();
 
 	/* Set LCD_RESET / XRES to high */
diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index 58c806e..0a4515d 100644
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -50,3 +50,11 @@ config BATTERY_OLPC
 	  Say Y to enable support for the battery on the OLPC laptop.
 
 endif # POWER_SUPPLY
+
+config GTA02_HDQ
+	tristate "Neo Freerunner HDQ"
+	depends on MACH_NEO1973_GTA02 && FIQ && S3C2440_C_FIQ
+	help
+	  Say Y to enable support for communicating with an HDQ battery
+	  on the Neo Freerunner.  You probably want to select
+	  at least BATTERY_BQ27000_HDQ as well
diff --git a/drivers/power/Makefile b/drivers/power/Makefile
index 6413ded..88f227f 100644
--- a/drivers/power/Makefile
+++ b/drivers/power/Makefile
@@ -20,3 +20,5 @@ obj-$(CONFIG_APM_POWER)		+= apm_power.o
 obj-$(CONFIG_BATTERY_DS2760)	+= ds2760_battery.o
 obj-$(CONFIG_BATTERY_PMU)	+= pmu_battery.o
 obj-$(CONFIG_BATTERY_OLPC)	+= olpc_battery.o
+
+obj-$(CONFIG_GTA02_HDQ)		+= gta02_hdq.o
diff --git a/drivers/power/gta02_hdq.c b/drivers/power/gta02_hdq.c
new file mode 100644
index 0000000..12c742e
--- /dev/null
+++ b/drivers/power/gta02_hdq.c
@@ -0,0 +1,250 @@
+/*
+ * HDQ driver for the FIC Neo1973 GTA02 GSM phone
+ *
+ * (C) 2006-2007 by OpenMoko, Inc.
+ * Author: Andy Green <andy@openmoko.com>
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/arch/gta02.h>
+#include <asm/arch/fiq_ipc_gta02.h>
+
+
+
+#define HDQ_READ 0
+#define HDQ_WRITE 0x80
+
+
+int gta02hdq_initialized(void)
+{
+	return fiq_ipc.hdq_probed;
+}
+EXPORT_SYMBOL_GPL(gta02hdq_initialized);
+
+int gta02hdq_read(int address)
+{
+	int count_sleeps = 5;
+	int ret = -ETIME;
+
+	mutex_lock(&fiq_ipc.hdq_lock);
+
+	fiq_ipc.hdq_ads = address | HDQ_READ;
+	fiq_ipc.hdq_request_ctr++;
+	fiq_kick();
+	/*
+	 * FIQ takes care of it while we block our calling process
+	 * But we're not spinning -- other processes run normally while
+	 * we wait for the result
+	 */
+	while (count_sleeps--) {
+		msleep(10); /* valid transaction always completes in < 10ms */
+
+		if (fiq_ipc.hdq_request_ctr != fiq_ipc.hdq_transaction_ctr)
+			continue;
+
+		if (fiq_ipc.hdq_error)
+			goto done; /* didn't see a response in good time */
+
+		ret = fiq_ipc.hdq_rx_data;
+		goto done;
+	}
+	ret = -EINVAL;
+
+done:
+	mutex_unlock(&fiq_ipc.hdq_lock);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(gta02hdq_read);
+
+int gta02hdq_write(int address, u8 data)
+{
+	int count_sleeps = 5;
+	int ret = -ETIME;
+
+	mutex_lock(&fiq_ipc.hdq_lock);
+
+	fiq_ipc.hdq_ads = address | HDQ_WRITE;
+	fiq_ipc.hdq_tx_data = data;
+	fiq_ipc.hdq_request_ctr++;
+	fiq_kick();
+	/*
+	 * FIQ takes care of it while we block our calling process
+	 * But we're not spinning -- other processes run normally while
+	 * we wait for the result
+	 */
+	while (count_sleeps--) {
+		msleep(10); /* valid transaction always completes in < 10ms */
+
+		if (fiq_ipc.hdq_request_ctr != fiq_ipc.hdq_transaction_ctr)
+			continue; /* something bad with FIQ */
+
+		if (fiq_ipc.hdq_error)
+			goto done; /* didn't see a response in good time */
+	}
+	ret = -EINVAL;
+
+done:
+	mutex_unlock(&fiq_ipc.hdq_lock);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(gta02hdq_write);
+
+/* sysfs */
+
+static ssize_t hdq_sysfs_dump(struct device *dev, struct device_attribute *attr,
+			 char *buf)
+{
+	int n;
+	int v;
+	u8 u8a[128]; /* whole address space for HDQ */
+	char *end = buf;
+
+	/* the dump does not take care about 16 bit regs, because at this
+	 * bus level we don't know about the chip details
+	 */
+	for (n = 0; n < sizeof(u8a); n++) {
+		v = gta02hdq_read(n);
+		if (v < 0)
+			goto bail;
+		u8a[n] = v;
+	}
+
+	for (n = 0; n < sizeof(u8a); n += 16) {
+		hex_dump_to_buffer(u8a + n, sizeof(u8a), 16, 1, end, 4096, 0);
+		end += strlen(end);
+		*end++ = '\n';
+		*end = '\0';
+	}
+	return (end - buf);
+
+bail:
+	return sprintf(buf, "ERROR %d\n", v);
+}
+
+/* you write by <address> <data>, eg, "34 128" */
+
+#define atoi(str) simple_strtoul(((str != NULL) ? str : ""), NULL, 0)
+
+static ssize_t hdq_sysfs_write(struct device *dev,
+			       struct device_attribute *attr,
+			       const char *buf, size_t count)
+{
+	const char *end = buf + count;
+	int address = atoi(buf);
+
+	while ((buf != end) && (*buf != ' '))
+		buf++;
+	if (buf >= end)
+		return 0;
+	while ((buf < end) && (*buf == ' '))
+		buf++;
+	if (buf >= end)
+		return 0;
+
+	gta02hdq_write(address, atoi(buf));
+
+	return count;
+}
+
+static DEVICE_ATTR(dump, 0400, hdq_sysfs_dump, NULL);
+static DEVICE_ATTR(write, 0600, NULL, hdq_sysfs_write);
+
+static struct attribute *gta02hdq_sysfs_entries[] = {
+	&dev_attr_dump.attr,
+	&dev_attr_write.attr,
+	NULL
+};
+
+static struct attribute_group gta02hdq_attr_group = {
+	.name	= "hdq",
+	.attrs	= gta02hdq_sysfs_entries,
+};
+
+
+#ifdef CONFIG_PM
+static int gta02hdq_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	/* after 18s of this, the battery monitor will also go to sleep */
+	s3c2410_gpio_setpin(fiq_ipc.hdq_gpio_pin, 0);
+	s3c2410_gpio_cfgpin(fiq_ipc.hdq_gpio_pin, S3C2410_GPIO_OUTPUT);
+	return 0;
+}
+
+static int gta02hdq_resume(struct platform_device *pdev)
+{
+	s3c2410_gpio_setpin(fiq_ipc.hdq_gpio_pin, 1);
+	s3c2410_gpio_cfgpin(fiq_ipc.hdq_gpio_pin, S3C2410_GPIO_OUTPUT);
+	return 0;
+}
+#endif
+
+static int __init gta02hdq_probe(struct platform_device *pdev)
+{
+	struct resource *r = platform_get_resource(pdev, 0, 0);
+
+	if (!machine_is_neo1973_gta02())
+		return -EIO;
+
+	if (!r)
+		return -EINVAL;
+
+	platform_set_drvdata(pdev, NULL);
+
+	mutex_init(&fiq_ipc.hdq_lock);
+
+	/* set our HDQ comms pin from the platform data */
+	fiq_ipc.hdq_gpio_pin = r->start;
+
+	s3c2410_gpio_setpin(fiq_ipc.hdq_gpio_pin, 1);
+	s3c2410_gpio_cfgpin(fiq_ipc.hdq_gpio_pin, S3C2410_GPIO_OUTPUT);
+
+	fiq_ipc.hdq_probed = 1; /* we are ready to do stuff now */
+
+	return sysfs_create_group(&pdev->dev.kobj, &gta02hdq_attr_group);
+}
+
+static int gta02hdq_remove(struct platform_device *pdev)
+{
+	sysfs_remove_group(&pdev->dev.kobj, &gta02hdq_attr_group);
+	return 0;
+}
+
+static struct platform_driver gta02hdq_driver = {
+	.probe		= gta02hdq_probe,
+	.remove		= gta02hdq_remove,
+#ifdef CONFIG_PM
+	.suspend	= gta02hdq_suspend,
+	.resume		= gta02hdq_resume,
+#endif
+	.driver		= {
+		.name		= "gta02-hdq",
+	},
+};
+
+static int __init gta02hdq_init(void)
+{
+	return platform_driver_register(&gta02hdq_driver);
+}
+
+static void __exit gta02hdq_exit(void)
+{
+ 	platform_driver_unregister(&gta02hdq_driver);
+}
+
+module_init(gta02hdq_init);
+module_exit(gta02hdq_exit);
+
+MODULE_AUTHOR("Andy Green <andy@openmoko.com>");
+MODULE_DESCRIPTION("GTA02 HDQ driver");
+MODULE_LICENSE("GPL");
diff --git a/include/asm-arm/arch-s3c2410/fiq_ipc_gta02.h b/include/asm-arm/arch-s3c2410/fiq_ipc_gta02.h
index 507d235..c5eb3df 100644
--- a/include/asm-arm/arch-s3c2410/fiq_ipc_gta02.h
+++ b/include/asm-arm/arch-s3c2410/fiq_ipc_gta02.h
@@ -19,12 +19,35 @@
 #include <asm/arch/pwm.h>
 #include <asm/plat-s3c/regs-timer.h>
 
+enum hdq_bitbang_states {
+	HDQB_IDLE = 0,
+	HDQB_TX_BREAK,
+	HDQB_TX_BREAK_RECOVERY,
+	HDQB_ADS_CALC,
+	HDQB_ADS_LOW,
+	HDQB_ADS_HIGH,
+	HDQB_WAIT_RX,
+	HDQB_DATA_RX_LOW,
+	HDQB_DATA_RX_HIGH,
+	HDQB_WAIT_TX,
+};
 
 struct fiq_ipc {
 	/* vibrator */
 	unsigned long vib_gpio_pin; /* which pin to meddle with */
 	u8 vib_pwm; /* 0 = OFF -- will ensure GPIO deasserted and stop FIQ */
 	u8 vib_pwm_latched;
+
+	/* hdq */
+	u8 hdq_probed; /* nonzero after HDQ driver probed */
+	struct mutex hdq_lock; /* if you want to use hdq, you have to take lock */
+	unsigned long hdq_gpio_pin; /* GTA02 = GPD14 which pin to meddle with */
+	u8 hdq_ads; /* b7..b6 = register address, b0 = r/w */
+	u8 hdq_tx_data; /* data to tx for write action */
+	u8 hdq_rx_data; /* data received in read action */
+	u8 hdq_request_ctr; /* incremented by "user" to request a transfer */
+	u8 hdq_transaction_ctr; /* incremented after each transfer */
+	u8 hdq_error; /* 0 = no error */
 };
 
 /* actual definition lives in arch/arm/mach-s3c2440/fiq_c_isr.c */
diff --git a/include/asm-arm/arch-s3c2410/gta02.h b/include/asm-arm/arch-s3c2410/gta02.h
index fa49d93..f686a7a 100644
--- a/include/asm-arm/arch-s3c2410/gta02.h
+++ b/include/asm-arm/arch-s3c2410/gta02.h
@@ -37,6 +37,7 @@
 
 #define GTA02v3_GPIO_nG1_CS	S3C2410_GPD12	/* v3 + v4 only */
 #define GTA02v3_GPIO_nG2_CS	S3C2410_GPD13	/* v3 + v4 only */
+#define GTA02v5_GPIO_HDQ	S3C2410_GPD14   /* v5 + */
 
 #define GTA02_GPIO_nG1_INT	S3C2410_GPF0
 #define GTA02_GPIO_IO1		S3C2410_GPF1
diff --git a/include/linux/gta02_hdq.h b/include/linux/gta02_hdq.h
new file mode 100644
index 0000000..2f43a62
--- /dev/null
+++ b/include/linux/gta02_hdq.h
@@ -0,0 +1,8 @@
+#ifndef __GTA02HDQ_H__
+#define __GTA02HDQ_H__
+
+int gta02hdq_read(int address);
+int gta02hdq_write(int address, u8 data);
+int gta02hdq_initialized(void);
+
+#endif
-- 
1.5.6.3