1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
|
From 1f95983593d5b6634c13ead8f923237484dc611e Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Wed, 5 Dec 2012 17:38:48 +0100
Subject: [PATCH 31/40] MIPS: lantiq: adds minimal dcdc driver
This driver so far only reads the core voltage.
Signed-off-by: John Crispin <blogic@openwrt.org>
---
arch/mips/lantiq/xway/Makefile | 2 +-
arch/mips/lantiq/xway/dcdc.c | 74 ++++++++++++++++++++++++++++++++++++++++
2 files changed, 75 insertions(+), 1 deletion(-)
create mode 100644 arch/mips/lantiq/xway/dcdc.c
diff --git a/arch/mips/lantiq/xway/Makefile b/arch/mips/lantiq/xway/Makefile
index 7a13660..087497d 100644
--- a/arch/mips/lantiq/xway/Makefile
+++ b/arch/mips/lantiq/xway/Makefile
@@ -1,3 +1,3 @@
-obj-y := prom.o sysctrl.o clk.o reset.o dma.o gptu.o
+obj-y := prom.o sysctrl.o clk.o reset.o dma.o gptu.o dcdc.o
obj-$(CONFIG_XRX200_PHY_FW) += xrx200_phy_fw.o
diff --git a/arch/mips/lantiq/xway/dcdc.c b/arch/mips/lantiq/xway/dcdc.c
new file mode 100644
index 0000000..8dd871a
--- /dev/null
+++ b/arch/mips/lantiq/xway/dcdc.c
@@ -0,0 +1,74 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Copyright (C) 2012 John Crispin <blogic@openwrt.org>
+ * Copyright (C) 2010 Sameer Ahmad, Lantiq GmbH
+ */
+
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/of_irq.h>
+
+#include <lantiq_soc.h>
+
+/* Bias and regulator Setup Register */
+#define DCDC_BIAS_VREG0 0xa
+/* Bias and regulator Setup Register */
+#define DCDC_BIAS_VREG1 0xb
+
+#define dcdc_w8(x, y) ltq_w8((x), dcdc_membase + (y))
+#define dcdc_r8(x) ltq_r8(dcdc_membase + (x))
+
+static void __iomem *dcdc_membase;
+
+static int dcdc_probe(struct platform_device *pdev)
+{
+ struct resource *res;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(&pdev->dev, "Failed to get resource\n");
+ return -ENOMEM;
+ }
+
+ /* remap dcdc register range */
+ dcdc_membase = devm_request_and_ioremap(&pdev->dev, res);
+ if (!dcdc_membase) {
+ dev_err(&pdev->dev, "Failed to remap resource\n");
+ return -ENOMEM;
+ }
+
+ dev_info(&pdev->dev, "Core Voltage : %d mV\n", dcdc_r8(DCDC_BIAS_VREG1) * 8);
+
+ return 0;
+}
+
+static const struct of_device_id dcdc_match[] = {
+ { .compatible = "lantiq,dcdc-xrx200" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, dcdc_match);
+
+static struct platform_driver dcdc_driver = {
+ .probe = dcdc_probe,
+ .driver = {
+ .name = "dcdc-xrx200",
+ .owner = THIS_MODULE,
+ .of_match_table = dcdc_match,
+ },
+};
+
+int __init dcdc_init(void)
+{
+ int ret = platform_driver_register(&dcdc_driver);
+
+ if (ret)
+ pr_info("dcdc: Error registering platform driver\n");
+ return ret;
+}
+
+arch_initcall(dcdc_init);
--
1.7.10.4
|
