1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
|
/*
* Marvell 88E6060 switch driver
* Copyright (c) 2008 Felix Fietkau <nbd@openwrt.org>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License v2 as published by the
* Free Software Foundation
*/
#ifndef __MVSWITCH_H
#define __MVSWITCH_H
#define MV_HEADER_SIZE 2
#define MV_HEADER_PORTS_M 0x001f
#define MV_HEADER_PORTS_S 0
#define MV_HEADER_VLAN_M 0xf000
#define MV_HEADER_VLAN_S 12
#define MV_TRAILER_SIZE 4
#define MV_TRAILER_PORTS_M 0x1f
#define MV_TRAILER_PORTS_S 16
#define MV_TRAILER_FLAGS_S 24
#define MV_TRAILER_OVERRIDE 0x80
#define MV_PORTS 5
#define MV_WANPORT 4
#define MV_CPUPORT 5
#define MV_BASE 0x10
#define MV_PHYPORT_BASE (MV_BASE + 0x0)
#define MV_PHYPORT(_n) (MV_PHYPORT_BASE + (_n))
#define MV_SWITCHPORT_BASE (MV_BASE + 0x8)
#define MV_SWITCHPORT(_n) (MV_SWITCHPORT_BASE + (_n))
#define MV_SWITCHREGS (MV_BASE + 0xf)
enum {
MV_PHY_CONTROL = 0x00,
MV_PHY_STATUS = 0x01,
MV_PHY_IDENT0 = 0x02,
MV_PHY_IDENT1 = 0x03,
MV_PHY_ANEG = 0x04,
MV_PHY_LINK_ABILITY = 0x05,
MV_PHY_ANEG_EXPAND = 0x06,
MV_PHY_XMIT_NEXTP = 0x07,
MV_PHY_LINK_NEXTP = 0x08,
MV_PHY_CONTROL1 = 0x10,
MV_PHY_STATUS1 = 0x11,
MV_PHY_INTR_EN = 0x12,
MV_PHY_INTR_STATUS = 0x13,
MV_PHY_INTR_PORT = 0x14,
MV_PHY_RECV_COUNTER = 0x16,
MV_PHY_LED_PARALLEL = 0x16,
MV_PHY_LED_STREAM = 0x17,
MV_PHY_LED_CTRL = 0x18,
MV_PHY_LED_OVERRIDE = 0x19,
MV_PHY_VCT_CTRL = 0x1a,
MV_PHY_VCT_STATUS = 0x1b,
MV_PHY_CONTROL2 = 0x1e
};
#define MV_PHYREG(_type, _port) MV_PHYPORT(_port), MV_PHY_##_type
enum {
MV_PORT_STATUS = 0x00,
MV_PORT_IDENT = 0x03,
MV_PORT_CONTROL = 0x04,
MV_PORT_VLANMAP = 0x06,
MV_PORT_ASSOC = 0x0b,
MV_PORT_RXCOUNT = 0x10,
MV_PORT_TXCOUNT = 0x11,
};
#define MV_PORTREG(_type, _port) MV_SWITCHPORT(_port), MV_PORT_##_type
enum {
MV_PORTCTRL_BLOCK = (1 << 0),
MV_PORTCTRL_LEARN = (2 << 0),
MV_PORTCTRL_ENABLED = (3 << 0),
MV_PORTCTRL_VLANTUN = (1 << 7), /* Enforce VLANs on packets */
MV_PORTCTRL_RXTR = (1 << 8), /* Enable Marvell packet trailer for ingress */
MV_PORTCTRL_HEADER = (1 << 11), /* Enable Marvell packet header mode for port */
MV_PORTCTRL_TXTR = (1 << 14), /* Enable Marvell packet trailer for egress */
MV_PORTCTRL_FORCEFL = (1 << 15), /* force flow control */
};
#define MV_PORTVLAN_ID(_n) (((_n) & 0xf) << 12)
#define MV_PORTVLAN_PORTS(_n) ((_n) & 0x3f)
#define MV_PORTASSOC_PORTS(_n) ((_n) & 0x1f)
#define MV_PORTASSOC_MONITOR (1 << 15)
enum {
MV_SWITCH_MAC0 = 0x01,
MV_SWITCH_MAC1 = 0x02,
MV_SWITCH_MAC2 = 0x03,
MV_SWITCH_CTRL = 0x04,
MV_SWITCH_ATU_CTRL = 0x0a,
MV_SWITCH_ATU_OP = 0x0b,
MV_SWITCH_ATU_DATA = 0x0c,
MV_SWITCH_ATU_MAC0 = 0x0d,
MV_SWITCH_ATU_MAC1 = 0x0e,
MV_SWITCH_ATU_MAC2 = 0x0f,
};
#define MV_SWITCHREG(_type) MV_SWITCHREGS, MV_SWITCH_##_type
enum {
MV_SWITCHCTL_EEIE = (1 << 0), /* EEPROM interrupt enable */
MV_SWITCHCTL_PHYIE = (1 << 1), /* PHY interrupt enable */
MV_SWITCHCTL_ATUDONE= (1 << 2), /* ATU done interrupt enable */
MV_SWITCHCTL_ATUIE = (1 << 3), /* ATU interrupt enable */
MV_SWITCHCTL_CTRMODE= (1 << 8), /* statistics for rx and tx errors */
MV_SWITCHCTL_RELOAD = (1 << 9), /* reload registers from eeprom */
MV_SWITCHCTL_MSIZE = (1 << 10), /* increase maximum frame size */
MV_SWITCHCTL_DROP = (1 << 13), /* discard frames with excessive collisions */
};
enum {
#define MV_ATUCTL_AGETIME_MIN 16
#define MV_ATUCTL_AGETIME_MAX 4080
#define MV_ATUCTL_AGETIME(_n) ((((_n) / 16) & 0xff) << 4)
MV_ATUCTL_ATU_256 = (0 << 12),
MV_ATUCTL_ATU_512 = (1 << 12),
MV_ATUCTL_ATU_1K = (2 << 12),
MV_ATUCTL_ATUMASK = (3 << 12),
MV_ATUCTL_NO_LEARN = (1 << 14),
MV_ATUCTL_RESET = (1 << 15),
}
#define MV_IDENT_MASK 0xfff0
#define MV_IDENT_VALUE 0x0600
#endif
|
