path: root/target/linux/coldfire/patches/029-Add-eSDHC-driver-for-MCF5441x.patch

From 73c65ac21faf1b016f8f8ddfab2dc3e58a5618f9 Mon Sep 17 00:00:00 2001
From: Alison Wang <b18965@freescale.com>
Date: Thu, 4 Aug 2011 09:59:46 +0800
Subject: [PATCH 29/52] Add eSDHC driver for MCF5441x

Add eSDHC PIO mode(read and write) and DMA mode(read and write) support.
Add card detect using extern irq.

Signed-off-by: Alison Wang <b18965@freescale.com>
---
 drivers/mmc/host/Kconfig  |   35 +
 drivers/mmc/host/Makefile |    1 +
 drivers/mmc/host/esdhc.c  | 1826 +++++++++++++++++++++++++++++++++++++++++++++
 drivers/mmc/host/esdhc.h  |  310 ++++++++
 4 files changed, 2172 insertions(+), 0 deletions(-)
 create mode 100644 drivers/mmc/host/esdhc.c
 create mode 100644 drivers/mmc/host/esdhc.h

--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -403,6 +403,41 @@ config DETECT_USE_EXTERN_IRQ1
 
 endchoice
 
+config MMC_ESDHC
+	tristate "Enhanced Secure Digital Host Controller Interface support"
+	depends on M5441X
+	help
+	  This select Freescale Enhanced SD Host Controller Interface.
+	  The controller is used in MCF5441x.
+	  If unsure, say N.
+
+config ESDHC_FORCE_PIO
+	tristate "eSDHC force to use PIO (no DMA) mode"
+	depends on MMC_ESDHC
+	help
+	  This select Freescale Enhanced SD Host Controller Interface.
+	  The controller is used in MCF5441x.
+	  If unsure, say N.
+
+choice
+	prompt "MMC/SD card detect "
+	depends on MMC_ESDHC
+
+config ESDHC_DETECT_USE_EXTERN_IRQ7
+	bool "based extern IRQ7"
+	depends on MMC_ESDHC
+	help
+	  MMC/SD cards using esdhc controller,
+	  we use the extern irq7 to detect card.
+config ESDHC_DETECT_USE_EXTERN_IRQ1
+	bool "based extern IRQ1"
+	depends on MMC_ESDHC
+	help
+	  MMC/SD cards using esdhc controller,
+	  we use the extern irq7 to detect card.
+
+endchoice
+
 config MMC_S3C
 	tristate "Samsung S3C SD/MMC Card Interface support"
 	depends on ARCH_S3C2410
--- a/drivers/mmc/host/Makefile
+++ b/drivers/mmc/host/Makefile
@@ -28,6 +28,7 @@ endif
 obj-$(CONFIG_MMC_S3C)   	+= s3cmci.o
 obj-$(CONFIG_MMC_SDRICOH_CS)	+= sdricoh_cs.o
 obj-$(CONFIG_MMC_TMIO)		+= tmio_mmc.o
+obj-$(CONFIG_MMC_ESDHC)         += esdhc.o
 obj-$(CONFIG_MMC_CB710)	+= cb710-mmc.o
 obj-$(CONFIG_MMC_VIA_SDMMC)	+= via-sdmmc.o
 obj-$(CONFIG_GPIOMMC)		+= gpiommc.o
--- /dev/null
+++ b/drivers/mmc/host/esdhc.c
@@ -0,0 +1,1826 @@
+/*
+ * drivers/mmc/host/esdhc.c
+ *
+ * Copyright (C) 2007-2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ *	Author: Chenghu Wu <b16972@freescale.com>
+ *		Xiaobo Xie <X.Xie@freescale.com>
+ *
+ *	Freescale Enhanced Secure Digital Host Controller driver.
+ *	Based on mpc837x/driver/mmc/host/esdhc.c done by Xiaobo Xie
+ *      Ported to Coldfire platform by Chenghu Wu
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/highmem.h>
+#include <linux/dma-mapping.h>
+#include <linux/scatterlist.h>
+#include <linux/uaccess.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/mmc/host.h>
+
+#include <asm/dma.h>
+#include <asm/page.h>
+
+#include <linux/platform_device.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+
+#include "esdhc.h"
+#define DRIVER_NAME "esdhc"
+
+
+#if defined(CONFIG_ESDHC_DETECT_USE_EXTERN_IRQ1)
+#define card_detect_extern_irq (64 + 1)
+#elif defined(CONFIG_ESDHC_DETECT_USE_EXTERN_IRQ7)
+#define card_detect_extern_irq (64 + 7)
+#else
+#define card_detect_extern_irq (64 + 7)
+#endif
+
+#undef ESDHC_DMA_KMALLOC
+
+#define SYS_BUSCLOCK 80000000
+#define ESDHC_DMA_SIZE	0x10000
+
+#undef MMC_ESDHC_DEBUG
+#undef MMC_ESDHC_DEBUG_REG
+
+#ifdef MMC_ESDHC_DEBUG
+#define DBG(fmt, args...) printk(KERN_INFO "[%s] " fmt "\n", __func__, ## args)
+#else
+#define DBG(fmt, args...) do {} while (0)
+#endif
+
+#ifdef MMC_ESDHC_DEBUG_REG
+static void esdhc_dumpregs(struct esdhc_host *host)
+{
+	printk(KERN_INFO "========= REGISTER DUMP ==========\n");
+
+	printk(KERN_INFO "Sysaddr: 0x%08x | Blkattr: 0x%08x\n",
+		fsl_readl(host->ioaddr + ESDHC_DMA_ADDRESS),
+		fsl_readl(host->ioaddr + ESDHC_BLOCK_ATTR));
+	printk(KERN_INFO "Argument: 0x%08x | COMMAND: 0x%08x\n",
+		fsl_readl(host->ioaddr + ESDHC_ARGUMENT),
+		fsl_readl(host->ioaddr + ESDHC_COMMAND));
+	printk(KERN_INFO "Present: 0x%08x | DMA ctl: 0x%08x\n",
+		fsl_readl(host->ioaddr + ESDHC_PRESENT_STATE),
+		fsl_readl(host->ioaddr + ESDHC_DMA_SYSCTL));
+	printk(KERN_INFO "PROCTL: 0x%08x | SYSCTL: 0x%08x\n",
+		fsl_readl(host->ioaddr + ESDHC_PROTOCOL_CONTROL),
+		fsl_readl(host->ioaddr + ESDHC_SYSTEM_CONTROL));
+	printk(KERN_INFO "Int stat: 0x%08x\n",
+		fsl_readl(host->ioaddr + ESDHC_INT_STATUS));
+	printk(KERN_INFO "Intenab: 0x%08x | Sigenab: 0x%08x\n",
+		fsl_readl(host->ioaddr + ESDHC_INT_ENABLE),
+		fsl_readl(host->ioaddr + ESDHC_SIGNAL_ENABLE));
+	printk(KERN_INFO "AC12 err: 0x%08x | Version: 0x%08x\n",
+		fsl_readl(host->ioaddr + ESDHC_ACMD12_ERR),
+		fsl_readl(host->ioaddr + ESDHC_HOST_VERSION));
+	printk(KERN_INFO "Caps: 0x%08x | Watermark: 0x%08x\n",
+		fsl_readl(host->ioaddr + ESDHC_CAPABILITIES),
+		fsl_readl(host->ioaddr + ESDHC_WML));
+	printk(KERN_INFO "MCF_INTC1_IPRH: 0x%08x | MCF_INTC1_IPRL: 0x%08x\n",
+		(unsigned int)MCF_INTC1_IPRH,
+		(unsigned int)MCF_INTC1_IPRL);
+	printk(KERN_INFO "MCF_INTC1_IMRH: 0x%08x | MCF_INTC1_IMRL: 0x%08x\n",
+		(unsigned int)MCF_INTC1_IMRH,
+		(unsigned int)MCF_INTC1_IMRL);
+	printk(KERN_INFO "MCF_INTC1_INTFRCH: 0x%08x | MCF_INTC1_INTFRCL: 0x%08x\n",
+		(unsigned int)MCF_INTC1_INTFRCH,
+		(unsigned int)MCF_INTC1_INTFRCL);
+	printk(KERN_INFO "MCF_INTC1_INTFRCH: 0x%08x | MCF_INTC1_INTFRCL: 0x%08x\n",
+		(unsigned int)MCF_INTC1_INTFRCH,
+		(unsigned int)MCF_INTC1_INTFRCL);
+	printk(KERN_INFO "MCF_INTC1_ICR63: 0x%08x | MCF_INTC0_ICR36: 0x%08x\n",
+		(unsigned int)MCF_INTC1_ICR63,
+		(unsigned int)MCF_INTC0_ICR36);
+
+	printk(KERN_INFO "==================================\n");
+}
+#else
+static void esdhc_dumpregs(struct esdhc_host *host)
+{
+	do {} while (0);
+}
+#endif
+
+
+static unsigned int debug_nodma;
+static unsigned int debug_forcedma;
+static unsigned int debug_quirks;
+
+#define ESDHC_QUIRK_CLOCK_BEFORE_RESET			(1<<0)
+#define ESDHC_QUIRK_FORCE_DMA				(1<<1)
+#define ESDHC_QUIRK_NO_CARD_NO_RESET			(1<<2)
+#define ESDHC_QUIRK_SINGLE_POWER_WRITE			(1<<3)
+
+static void esdhc_prepare_data(struct esdhc_host *, struct mmc_data *);
+static void esdhc_finish_data(struct esdhc_host *);
+static irqreturn_t esdhc_irq(int irq, void *dev_id);
+static void esdhc_send_command(struct esdhc_host *, struct mmc_command *);
+static void esdhc_finish_command(struct esdhc_host *);
+
+/*****************************************************************************\
+ *                                                                           *
+ * Low level functions                                                       *
+ *                                                                           *
+\*****************************************************************************/
+
+static void esdhc_reset(struct esdhc_host *host, u8 mask)
+{
+	unsigned long timeout;
+	unsigned int sysctl;
+
+	if (host->chip->quirks & ESDHC_QUIRK_NO_CARD_NO_RESET) {
+		if (!(fsl_readl(host->ioaddr + ESDHC_PRESENT_STATE) &
+			ESDHC_CARD_PRESENT))
+			return;
+	}
+
+	timeout = fsl_readl(host->ioaddr + ESDHC_SYSTEM_CONTROL);
+	timeout = timeout | (mask << ESDHC_RESET_SHIFT);
+	fsl_writel(host->ioaddr + ESDHC_SYSTEM_CONTROL, timeout);
+
+	if (mask & ESDHC_RESET_ALL) {
+		host->clock = 0;
+		host->bus_width = 0;
+	}
+
+	/* Wait max 100 ms */
+	timeout = 100;
+
+	/* hw clears the bit when it's done */
+	sysctl = (mask << ESDHC_RESET_SHIFT);
+	while (fsl_readl(host->ioaddr + ESDHC_SYSTEM_CONTROL) & sysctl) {
+		if (timeout == 0) {
+			printk(KERN_ERR "%s: Reset 0x%x never completed.\n",
+				mmc_hostname(host->mmc), (int)mask);
+			esdhc_dumpregs(host);
+			return;
+		}
+		timeout--;
+		mdelay(1);
+	}
+}
+
+static void esdhc_init(struct esdhc_host *host)
+{
+	u32 intmask;
+	/*reset eSDHC chip*/
+	esdhc_reset(host, ESDHC_RESET_ALL);
+
+	intmask = fsl_readl(host->ioaddr + ESDHC_PRESENT_STATE);
+	intmask = intmask & 0xF7000000;
+	fsl_writel(host->ioaddr + ESDHC_PRESENT_STATE, intmask);
+
+	intmask = fsl_readl(host->ioaddr + ESDHC_SYSTEM_CONTROL);
+	intmask = intmask | ESDHC_CLOCK_INT_EN | ESDHC_CLOCK_INT_STABLE;
+	fsl_writel(host->ioaddr + ESDHC_SYSTEM_CONTROL, intmask);
+
+	intmask = fsl_readl(host->ioaddr + ESDHC_INT_STATUS);
+	fsl_writel(host->ioaddr + ESDHC_INT_STATUS, intmask);
+
+	intmask = fsl_readl(host->ioaddr + ESDHC_INT_ENABLE);
+
+	fsl_writel(host->ioaddr + ESDHC_INT_ENABLE, intmask);
+	fsl_writel(host->ioaddr + ESDHC_SIGNAL_ENABLE, intmask);
+	/* Modelo does not support */
+	/*MCF_ESDHC_SCR = MCF_ESDHC_SCR  | ESDHC_DMA_SNOOP | 0xC0;*/
+
+	intmask = fsl_readl(host->ioaddr + ESDHC_PROTOCOL_CONTROL);
+	intmask &= ~ESDHC_CTRL_D3_DETEC;
+
+	fsl_writel(host->ioaddr + ESDHC_PROTOCOL_CONTROL, intmask);
+	DBG(" init %x\n", fsl_readl(host->ioaddr + ESDHC_PROTOCOL_CONTROL));
+}
+
+static void reset_regs(struct esdhc_host *host)
+{
+	u32 intmask;
+
+	intmask = fsl_readl(host->ioaddr + ESDHC_INT_STATUS);
+	fsl_writel(host->ioaddr + ESDHC_INT_STATUS, intmask);
+
+	intmask = ESDHC_INT_DATA_END_BIT | ESDHC_INT_DATA_CRC |
+		ESDHC_INT_DATA_TIMEOUT | ESDHC_INT_INDEX |
+		ESDHC_INT_END_BIT | ESDHC_INT_CRC | ESDHC_INT_TIMEOUT |
+		ESDHC_INT_DATA_AVAIL | ESDHC_INT_SPACE_AVAIL |
+		ESDHC_INT_DMA_END | ESDHC_INT_DATA_END | ESDHC_INT_RESPONSE;
+
+	fsl_writel(host->ioaddr + ESDHC_INT_ENABLE, intmask);
+	fsl_writel(host->ioaddr + ESDHC_SIGNAL_ENABLE, intmask);
+
+	if (host->bus_width == MMC_BUS_WIDTH_4) {
+		intmask = fsl_readl(host->ioaddr + ESDHC_PROTOCOL_CONTROL);
+		intmask |= ESDHC_CTRL_4BITBUS;
+		fsl_writel(host->ioaddr + ESDHC_PROTOCOL_CONTROL, intmask);
+	}
+}
+
+/*****************************************************************************
+ *                                                                           *
+ * Core functions                                                            *
+ *                                                                           *
+ *****************************************************************************/
+/* Return the SG's virtual address */
+static inline char *esdhc_sg_to_buffer(struct esdhc_host *host)
+{
+	DBG("cur_sg %x virt %x\n", host->cur_sg, sg_virt(host->cur_sg));
+	return sg_virt(host->cur_sg);
+}
+
+static inline int esdhc_next_sg(struct esdhc_host *host)
+{
+	/*
+	 * Skip to next SG entry.
+	 */
+	host->cur_sg = sg_next(host->cur_sg);
+	host->num_sg--;
+
+	/*
+	 * Any entries left?
+	 */
+	if (host->num_sg > 0) {
+		host->offset = 0;
+		host->remain = host->cur_sg->length;
+	}
+
+	DBG("%s: host->remain %x  %x\n", __func__, host->remain, host->num_sg);
+	return host->num_sg;
+}
+
+static void esdhc_read_block_pio(struct esdhc_host *host)
+{
+	int blksize, chunk_remain;
+	u32 data;
+	char *buffer;
+	int size;
+
+	DBG("PIO reading\n");
+
+	/* Delay prevents data read error in big files */
+	udelay(100);
+
+	blksize = host->data->blksz;
+	chunk_remain = 0;
+	data = 0;
+
+	buffer = esdhc_sg_to_buffer(host) + host->offset;
+
+	while (blksize) {
+		if (chunk_remain == 0) {
+			data = fsl_readl(host->ioaddr + ESDHC_BUFFER);
+			chunk_remain = min(blksize, 4);
+		}
+
+		size = min(host->remain, chunk_remain);
+
+		chunk_remain -= size;
+		blksize -= size;
+		host->offset += size;
+		host->remain -= size;
+
+		while (size) {
+			*buffer = data & 0xFF;
+			buffer++;
+			data >>= 8;
+			size--;
+		}
+
+		if (host->remain == 0) {
+			if (esdhc_next_sg(host) == 0) {
+				BUG_ON(blksize != 0);
+				return;
+			}
+			buffer = esdhc_sg_to_buffer(host);
+		}
+	}
+}
+
+static void esdhc_write_block_pio(struct esdhc_host *host)
+{
+	int blksize, chunk_remain;
+	u32 data;
+	char *buffer;
+	int bytes, size;
+
+	DBG("PIO writing\n");
+
+	/* Delay necessary when writing large data blocks to SD card */
+	udelay(100);
+
+	blksize = host->data->blksz;
+	chunk_remain = 4;
+	data = 0;
+
+	bytes = 0;
+	buffer = esdhc_sg_to_buffer(host) + host->offset;
+
+	while (blksize) {
+		size = min(host->remain, chunk_remain);
+
+		chunk_remain -= size;
+		blksize -= size;
+		host->offset += size;
+		host->remain -= size;
+
+		while (size) {
+			data >>= 8;
+			data |= (u32)*buffer << 24;
+			buffer++;
+			size--;
+		}
+
+		if (chunk_remain == 0) {
+			fsl_writel(host->ioaddr + ESDHC_BUFFER, data);
+			chunk_remain = min(blksize, 4);
+		}
+
+		if (host->remain == 0) {
+			if (esdhc_next_sg(host) == 0) {
+				BUG_ON(blksize != 0);
+				return;
+			}
+			buffer = esdhc_sg_to_buffer(host);
+		}
+	}
+}
+
+static void esdhc_transfer_pio(struct esdhc_host *host)
+{
+	u32 mask;
+
+	BUG_ON(!host->data);
+
+	if (host->num_sg == 0)
+		return;
+
+	if (host->data->flags & MMC_DATA_READ)
+		mask = ESDHC_DATA_AVAILABLE;
+	else
+		mask = ESDHC_SPACE_AVAILABLE;
+
+	while (fsl_readl(host->ioaddr + ESDHC_PRESENT_STATE) & mask) {
+		if (host->data->flags & MMC_DATA_READ)
+			esdhc_read_block_pio(host);
+		else
+			esdhc_write_block_pio(host);
+
+		if (host->num_sg == 0)
+			break;
+	}
+
+	DBG("PIO transfer complete.\n");
+	/* Delay necessary when writing large data blocks to SD card */
+	udelay(100);
+}
+
+static void esdhc_prepare_data(struct esdhc_host *host, struct mmc_data *data)
+{
+	u8 count;
+	unsigned blkattr = 0;
+	unsigned target_timeout, current_timeout;
+	unsigned int sysctl;
+
+	WARN_ON(host->data);
+
+	if (data == NULL)
+		return;
+
+	DBG("blksz %04x blks %04x flags %08x",
+		data->blksz, data->blocks, data->flags);
+	DBG("tsac %d ms nsac %d clk",
+		data->timeout_ns / 1000000, data->timeout_clks);
+
+	/* Sanity checks */
+	BUG_ON(data->blksz * data->blocks > 524288);
+	BUG_ON(data->blksz > host->mmc->max_blk_size);
+	BUG_ON(data->blocks > 65535);
+
+	if (host->clock == 0)
+		return;
+
+	/* timeout in us */
+	target_timeout = data->timeout_ns / 1000 +
+		(data->timeout_clks * 1000000) / host->clock;
+
+	/*
+	 * Figure out needed cycles.
+	 * We do this in steps in order to fit inside a 32 bit int.
+	 * The first step is the minimum timeout, which will have a
+	 * minimum resolution of 6 bits:
+	 * (1) 2^13*1000 > 2^22,
+	 * (2) host->timeout_clk < 2^16
+	 *     =>
+	 *     (1) / (2) > 2^6
+	 */
+	count = 0;
+	host->timeout_clk = host->clock/1000;
+	current_timeout = (1 << 13) * 1000 / host->timeout_clk;
+	while (current_timeout < target_timeout) {
+		count++;
+		current_timeout <<= 1;
+		if (count >= 0xF)
+			break;
+	}
+
+	if (count >= 0xF) {
+		DBG("%s:Timeout requested is too large!\n",
+			mmc_hostname(host->mmc));
+		count = 0xE;
+	}
+
+	if (data->blocks >= 0x50) {
+		DBG("%s:Blocks %x are too large!\n",
+			mmc_hostname(host->mmc),
+			data->blocks);
+		count = 0xE;
+	}
+
+	if ((data->blocks == 1) && (data->blksz >= 0x200)) {
+		DBG("%s:Blocksize %x is too large\n",
+			mmc_hostname(host->mmc),
+			data->blksz);
+		count = 0xE;
+	}
+	count = 0xE;
+
+	sysctl = fsl_readl(host->ioaddr + ESDHC_SYSTEM_CONTROL);
+	sysctl &= (~ESDHC_TIMEOUT_MASK);
+	fsl_writel(host->ioaddr + ESDHC_SYSTEM_CONTROL,
+		sysctl | (count<<ESDHC_TIMEOUT_SHIFT));
+
+	/* Data transfer*/
+	if (host->flags & ESDHC_USE_DMA) {
+		int sg_count;
+		unsigned int wml;
+		unsigned int wml_value;
+		unsigned int timeout;
+
+		/* DMA address eSDHC in Modelo must be 4 bytes aligned */
+		if ((data->sg->offset & 0x3) == 0)
+			host->offset = 0;
+		else
+			host->offset = 0x4 - (data->sg->offset & 0x3);
+
+		sg_count = dma_map_sg(mmc_dev(host->mmc), data->sg,
+					data->sg_len,
+					(data->flags & MMC_DATA_READ)
+					? DMA_FROM_DEVICE : DMA_TO_DEVICE);
+
+		BUG_ON(sg_count != 1);
+		/* The data in SD card is little endian,
+		   the SD controller is big endian */
+		if ((data->flags & MMC_DATA_WRITE) == MMC_DATA_WRITE) {
+			unsigned char *buffer = sg_virt(data->sg);
+			unsigned char *buffer_tx =
+				(unsigned char *)host->dma_tx_buf;
+			int i;
+			/* Each sector is 512 Bytes, write 0x200 sectors */
+			memset(host->dma_tx_buf, 0, ESDHC_DMA_SIZE);
+			for (i = 0; i < data->sg->length; i = i + 4) {
+				*(buffer_tx + i + 3) = *(buffer + i);
+				*(buffer_tx + i + 2) = *(buffer + i + 1);
+				*(buffer_tx + i + 1) = *(buffer + i + 2);
+				*(buffer_tx + i)     = *(buffer + i + 3);
+			}
+
+			fsl_writel(host->ioaddr + ESDHC_DMA_ADDRESS,
+				(unsigned long)host->dma_tx_dmahandle);
+		} else {
+			fsl_writel(host->ioaddr + ESDHC_DMA_ADDRESS,
+				sg_dma_address(data->sg) + host->offset);
+		}
+
+		/* Disable the BRR and BWR interrupt */
+		timeout = fsl_readl(host->ioaddr + ESDHC_INT_ENABLE);
+		timeout = timeout & (~(ESDHC_INT_DATA_AVAIL |
+					ESDHC_INT_SPACE_AVAIL));
+		fsl_writel(host->ioaddr + ESDHC_INT_ENABLE, timeout);
+
+		timeout = fsl_readl(host->ioaddr + ESDHC_SIGNAL_ENABLE);
+		timeout = timeout & (~(ESDHC_INT_DATA_AVAIL |
+					ESDHC_INT_SPACE_AVAIL));
+		fsl_writel(host->ioaddr + ESDHC_SIGNAL_ENABLE, timeout);
+
+		wml_value = data->blksz / 4;
+		if (data->flags & MMC_DATA_READ) {
+			/* Read watermask level, max is 0x10*/
+			if (wml_value > 0x10)
+				wml_value = 0x10;
+			wml = (wml_value & ESDHC_WML_MASK) |
+				((0x10 & ESDHC_WML_MASK)
+				 << ESDHC_WML_WRITE_SHIFT);
+		} else {
+			if (wml_value > 0x80)
+				wml_value = 0x80;
+			wml = (0x10 & ESDHC_WML_MASK) |
+				(((wml_value) & ESDHC_WML_MASK)
+				 << ESDHC_WML_WRITE_SHIFT);
+		}
+
+		fsl_writel(host->ioaddr + ESDHC_WML, wml);
+	} else {
+		unsigned long timeout;
+
+		host->cur_sg = data->sg;
+		host->num_sg = data->sg_len;
+
+		host->offset = 0;
+		host->remain = host->cur_sg->length;
+
+		timeout = fsl_readl(host->ioaddr + ESDHC_INT_ENABLE);
+		timeout = timeout | ESDHC_INT_DATA_AVAIL
+				| ESDHC_INT_SPACE_AVAIL;
+		fsl_writel(host->ioaddr + ESDHC_INT_ENABLE, timeout);
+
+		timeout = fsl_readl(host->ioaddr + ESDHC_SIGNAL_ENABLE);
+		timeout = timeout | ESDHC_INT_DATA_AVAIL
+				| ESDHC_INT_SPACE_AVAIL;
+		fsl_writel(host->ioaddr + ESDHC_SIGNAL_ENABLE, timeout);
+	}
+
+	/* We do not handle DMA boundaries */
+	blkattr = data->blksz;
+	blkattr |= (data->blocks << 16);
+	fsl_writel(host->ioaddr + ESDHC_BLOCK_ATTR, blkattr);
+	esdhc_dumpregs(host);
+}
+
+static unsigned int esdhc_set_transfer_mode(struct esdhc_host *host,
+	struct mmc_data *data)
+{
+	u32 mode = 0;
+
+	WARN_ON(host->data);
+
+	if (data == NULL)
+		return 0;
+
+	mode = ESDHC_TRNS_BLK_CNT_EN;
+	if (data->blocks > 1) {
+		if (data->flags & MMC_DATA_READ)
+			mode |= ESDHC_TRNS_MULTI | ESDHC_TRNS_ACMD12;
+		else
+			mode |= ESDHC_TRNS_MULTI;
+	}
+	if (data->flags & MMC_DATA_READ)
+		mode |= ESDHC_TRNS_READ;
+	if (host->flags & ESDHC_USE_DMA)
+		mode |= ESDHC_TRNS_DMA;
+
+	return mode;
+}
+
+static void esdhc_finish_data(struct esdhc_host *host)
+{
+	struct mmc_data *data;
+	u16 blocks;
+
+	BUG_ON(!host->data);
+
+	data = host->data;
+	host->data = NULL;
+
+	if (host->flags & ESDHC_USE_DMA) {
+		unsigned char *buffer = sg_virt(data->sg);
+		unsigned char C0, C1, C2, C3;
+		int i;
+		/* Data in SD card is little endian,
+		   SD controller is big endian */
+
+		dma_unmap_sg(mmc_dev(host->mmc), data->sg, data->sg_len,
+					(data->flags & MMC_DATA_READ)
+					? DMA_FROM_DEVICE : DMA_TO_DEVICE);
+		if (((data->flags & MMC_DATA_READ) == MMC_DATA_READ)) {
+			for (i = 0; i < data->sg->length; i = i + 4) {
+				C0  = *(buffer + host->offset + i);
+				C1  = *(buffer + host->offset + i + 1);
+				C2  = *(buffer + host->offset + i + 2);
+				C3  = *(buffer + host->offset + i + 3);
+				*(buffer+i)   = C3;
+				*(buffer+i+1) = C2;
+				*(buffer+i+2) = C1;
+				*(buffer+i+3) = C0;
+			}
+		}
+	}
+	/*
+	 * Controller doesn't count down when in single block mode.
+	 */
+	if ((data->blocks == 1) && (data->error == MMC_ERR_NONE))
+		blocks = 0;
+	else {
+		blocks = fsl_readl(host->ioaddr + ESDHC_BLOCK_ATTR) >> 16;
+		blocks = 0;
+		if (data->flags & MMC_DATA_READ)
+			data->stop = 0;
+	}
+
+	data->bytes_xfered = data->blksz * (data->blocks - blocks);
+
+	if ((data->error == MMC_ERR_NONE) && blocks) {
+		printk(KERN_ERR"%s: Controller signaled completion even "
+		       "though there were blocks left.\n",
+			mmc_hostname(host->mmc));
+		data->error = MMC_ERR_FAILED;
+	}
+
+	if ((blocks == 0) && (data->error & MMC_ERR_TIMEOUT)) {
+		printk(KERN_ERR "Controller transmitted completion even "
+		       "though there was a timeout error.\n");
+		data->error &= ~MMC_ERR_TIMEOUT;
+	}
+
+	if (data->stop) {
+		DBG("%s data->stop %x\n", __func__, data->stop);
+		/*
+		 * The controller needs a reset of internal state machines
+		 * upon error conditions.
+		 */
+		if (data->error != MMC_ERR_NONE) {
+			printk("%s: The controller needs a "
+				"reset of internal state machines\n",
+				__func__);
+			esdhc_reset(host, ESDHC_RESET_CMD);
+			esdhc_reset(host, ESDHC_RESET_DATA);
+			reset_regs(host);
+		}
+
+		esdhc_send_command(host, data->stop);
+	} else
+		tasklet_schedule(&host->finish_tasklet);
+}
+
+static void esdhc_send_command(struct esdhc_host *host, struct mmc_command *cmd)
+{
+	unsigned int flags;
+	u32 mask;
+	unsigned long timeout;
+
+	WARN_ON(host->cmd);
+
+	/* Wait max 10 ms */
+	timeout = 10;
+
+	mask = ESDHC_CMD_INHIBIT;
+	if ((cmd->data != NULL) || (cmd->flags & MMC_RSP_BUSY))
+		mask |= ESDHC_DATA_INHIBIT;
+
+	/* We shouldn't wait for data inihibit for stop commands, even
+	   though they might use busy signaling */
+	if (host->mrq->data && (cmd == host->mrq->data->stop))
+		mask &= ~ESDHC_DATA_INHIBIT;
+
+	while (fsl_readl(host->ioaddr + ESDHC_PRESENT_STATE) & mask) {
+		if (timeout == 0) {
+			printk(KERN_ERR "%s: Controller never released "
+			       "inhibit bit(s).\n", mmc_hostname(host->mmc));
+			esdhc_dumpregs(host);
+			cmd->error = MMC_ERR_FAILED;
+			tasklet_schedule(&host->finish_tasklet);
+			return;
+		}
+		timeout--;
+		mdelay(1);
+	}
+
+	mod_timer(&host->timer, jiffies + 15 * HZ);
+
+	host->cmd = cmd;
+
+	esdhc_prepare_data(host, cmd->data);
+
+	fsl_writel(host->ioaddr + ESDHC_ARGUMENT, cmd->arg);
+
+	flags = esdhc_set_transfer_mode(host, cmd->data);
+
+	if ((cmd->flags & MMC_RSP_136) && (cmd->flags & MMC_RSP_BUSY)) {
+		printk(KERN_ERR "%s: Unsupported response type!\n",
+		       mmc_hostname(host->mmc));
+		cmd->error = MMC_ERR_INVALID;
+		tasklet_schedule(&host->finish_tasklet);
+		return;
+	}
+
+	if (!(cmd->flags & MMC_RSP_PRESENT))
+		flags |= ESDHC_CMD_RESP_NONE;
+	else if (cmd->flags & MMC_RSP_136)
+		flags |= ESDHC_CMD_RESP_LONG;
+	else if (cmd->flags & MMC_RSP_BUSY)
+		flags |= ESDHC_CMD_RESP_SHORT_BUSY;
+	else
+		flags |= ESDHC_CMD_RESP_SHORT;
+
+	if (cmd->flags & MMC_RSP_CRC)
+		flags |= ESDHC_CMD_CRC_EN;
+	if (cmd->flags & MMC_RSP_OPCODE)
+		flags |= ESDHC_CMD_INDEX_EN;
+	if (cmd->data)
+		flags |= ESDHC_CMD_DATA;
+
+	fsl_writel(host->ioaddr + ESDHC_COMMAND,
+		 ESDHC_MAKE_CMD(cmd->opcode, flags));
+}
+
+static void esdhc_finish_command(struct esdhc_host *host)
+{
+	int i;
+
+	BUG_ON(host->cmd == NULL);
+
+	if (host->cmd->flags & MMC_RSP_PRESENT) {
+		if (host->cmd->flags & MMC_RSP_136) {
+			/* CRC is stripped so we need to do some shifting. */
+			for (i = 0; i < 4; i++) {
+				host->cmd->resp[i] = fsl_readl(host->ioaddr +
+						ESDHC_RESPONSE + (3-i)*4) << 8;
+				if (i != 3)
+					host->cmd->resp[i] |=
+						(fsl_readl(host->ioaddr
+							+ ESDHC_RESPONSE
+							+ (2-i)*4) >> 24);
+			}
+		} else
+			host->cmd->resp[0] = fsl_readl(host->ioaddr +
+							ESDHC_RESPONSE);
+	}
+
+	host->cmd->error = MMC_ERR_NONE;
+
+	if (host->cmd->data)
+		host->data = host->cmd->data;
+	else
+		tasklet_schedule(&host->finish_tasklet);
+
+	host->cmd = NULL;
+}
+
+#define MYCLOCK 1
+static void esdhc_set_clock(struct esdhc_host *host, unsigned int clock)
+{
+#if MYCLOCK
+	unsigned long sdrefclk, vco, bestmatch = -1, temp, diff;
+	int dvs, sdclkfs, outdiv;
+	int best_dvs, best_sdclkfs, best_outdiv;
+#else
+	int div, pre_div;
+	unsigned long sys_busclock = SYS_BUSCLOCK;
+#endif
+	unsigned long timeout;
+	u16 clk;
+
+	DBG("esdhc_set_clock %x\n", clock);
+	if (clock == host->clock)
+		return;
+
+	timeout = fsl_readl(host->ioaddr + ESDHC_SYSTEM_CONTROL);
+	timeout = timeout & (~ESDHC_CLOCK_MASK);
+	fsl_writel(host->ioaddr + ESDHC_SYSTEM_CONTROL, timeout);
+
+	if (clock == 0)
+		goto out;
+
+#if MYCLOCK
+	/* TC: The VCO must obtain from u-boot */
+	/*
+	* First set the outdiv3 to min 1, then walk through all to
+	* get closer value with SDCLKDIV and DIV combination
+	*/
+	vco = 500000000;
+	MCF_CLOCK_PLL_DR &= 0xFFFF83FF;         /* Disable SD Clock */
+
+	for (outdiv = 2; outdiv <= 32; outdiv++) {
+		sdrefclk = vco / outdiv;
+
+		for (sdclkfs = 2; sdclkfs < 257; sdclkfs <<= 1) {
+			for (dvs = 1; dvs < 17; dvs++) {
+				temp = sdrefclk / (sdclkfs * dvs);
+
+				if (temp > clock)
+					diff = temp - clock;
+				else
+					diff = clock - temp;
+
+				if (diff <= bestmatch) {
+					bestmatch = diff;
+					best_outdiv = outdiv;
+					best_sdclkfs = sdclkfs;
+					best_dvs = dvs;
+
+					if (bestmatch == 0)
+						goto end;
+				}
+			}
+		}
+	}
+
+end:
+#ifdef CONFIG_M5441X
+	best_outdiv = 3;
+	best_sdclkfs = 2;
+	best_dvs = 5;
+#endif
+	MCF_CLOCK_PLL_DR |= ((best_outdiv - 1) << 10);
+	clk = ((best_sdclkfs >> 1) << 8) | ((best_dvs - 1) << 4);
+#else
+
+	if (sys_busclock / 16 > clock) {
+		for (pre_div = 1; pre_div < 256; pre_div *= 2) {
+			if ((sys_busclock / pre_div) < (clock*16))
+				break;
+		}
+	} else
+		pre_div = 1;
+
+	for (div = 1; div <= 16; div++) {
+		if ((sys_busclock / (div*pre_div)) <= clock)
+			break;
+	}
+
+	pre_div >>= 1;
+	div -= 1;
+
+	clk = (div << ESDHC_DIVIDER_SHIFT) | (pre_div << ESDHC_PREDIV_SHIFT);
+#endif
+
+	timeout = fsl_readl(host->ioaddr + ESDHC_SYSTEM_CONTROL);
+	timeout = timeout | clk;
+
+	fsl_writel(host->ioaddr + ESDHC_SYSTEM_CONTROL, timeout);
+
+	/* Wait max 10 ms */
+	timeout = 10;
+	while (timeout) {
+		timeout--;
+		mdelay(1);
+	}
+
+	timeout = fsl_readl(host->ioaddr + ESDHC_SYSTEM_CONTROL);
+	timeout = timeout | ESDHC_CLOCK_CARD_EN;
+	fsl_writel(host->ioaddr + ESDHC_SYSTEM_CONTROL, timeout);
+
+	esdhc_dumpregs(host);
+
+out:
+	host->clock = clock;
+	if (host->clock == 0) {
+		timeout = fsl_readl(host->ioaddr + ESDHC_SYSTEM_CONTROL);
+		timeout = timeout | ESDHC_CLOCK_DEFAULT;
+		fsl_writel(host->ioaddr + ESDHC_SYSTEM_CONTROL, timeout);
+	}
+}
+
+static void esdhc_set_power(struct esdhc_host *host, unsigned short power)
+{
+	if (host->power == power)
+		return;
+
+	if (power == (unsigned short)-1)
+		host->power = power;
+}
+
+/*****************************************************************************\
+ *                                                                           *
+ * MMC callbacks                                                             *
+ *                                                                           *
+\*****************************************************************************/
+
+static void esdhc_request(struct mmc_host *mmc, struct mmc_request *mrq)
+{
+	struct esdhc_host *host;
+	unsigned long flags;
+
+	DBG("esdhc_request\n");
+	host = mmc_priv(mmc);
+
+	spin_lock_irqsave(&host->lock, flags);
+
+	WARN_ON(host->mrq != NULL);
+
+	host->mrq = mrq;
+
+	esdhc_send_command(host, mrq->cmd);
+
+	mmiowb();
+	spin_unlock_irqrestore(&host->lock, flags);
+}
+
+static void esdhc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+	struct esdhc_host *host;
+	unsigned long flags;
+	u32 ctrl, irq_status_ena, irq_signal_ena;
+
+	DBG("ios->power_mode %x, ios->bus_width %x\n",
+		ios->power_mode, ios->bus_width);
+	host = mmc_priv(mmc);
+
+	spin_lock_irqsave(&host->lock, flags);
+
+	/*
+	 * Reset the chip on each power off.
+	 * Should clear out any weird states.
+	 */
+
+	if (ios->power_mode == MMC_POWER_OFF) {
+		fsl_writel(host->ioaddr + ESDHC_SIGNAL_ENABLE, 0);
+		esdhc_init(host);
+	}
+
+	esdhc_set_clock(host, ios->clock);
+
+	if (ios->power_mode == MMC_POWER_OFF)
+		esdhc_set_power(host, -1);
+	else
+		esdhc_set_power(host, ios->vdd);
+
+	ctrl = fsl_readl(host->ioaddr + ESDHC_PROTOCOL_CONTROL);
+
+	if (ios->bus_width == MMC_BUS_WIDTH_4) {
+		ctrl |= ESDHC_CTRL_4BITBUS;
+		host->bus_width = MMC_BUS_WIDTH_4;
+
+		 ctrl &= ~ESDHC_CTRL_D3_DETEC;
+
+		/*when change the config of the CD,
+		* will involve card remove interrupt
+		* So try disable the card remove interrupt.
+		*/
+		irq_status_ena = fsl_readl(host->ioaddr + ESDHC_INT_ENABLE);
+		irq_status_ena &= ~ESDHC_INT_CARD_REMOVE;
+		fsl_writel(host->ioaddr + ESDHC_INT_ENABLE, irq_status_ena);
+
+		irq_signal_ena = fsl_readl(host->ioaddr + ESDHC_SIGNAL_ENABLE);
+		irq_signal_ena &= ~ESDHC_INT_CARD_REMOVE;
+		fsl_writel(host->ioaddr + ESDHC_SIGNAL_ENABLE, irq_signal_ena);
+
+		DBG("host->card_insert = 0x%x\n", host->card_insert);
+
+
+	} else {
+		ctrl &= ~ESDHC_CTRL_4BITBUS;
+		host->bus_width = MMC_BUS_WIDTH_1;
+	}
+
+	fsl_writel(host->ioaddr + ESDHC_PROTOCOL_CONTROL, ctrl);
+	mmiowb();
+	spin_unlock_irqrestore(&host->lock, flags);
+
+	esdhc_dumpregs(host);
+}
+
+static int esdhc_get_ro(struct mmc_host *mmc)
+{
+	return 0;
+}
+
+static const struct mmc_host_ops esdhc_ops = {
+	.request	= esdhc_request,
+	.set_ios	= esdhc_set_ios,
+	.get_ro		= esdhc_get_ro,
+};
+
+/*****************************************************************************\
+ *                                                                           *
+ * Tasklets                                                                  *
+ *                                                                           *
+\*****************************************************************************/
+
+static void esdhc_tasklet_card(unsigned long param)
+{
+	struct esdhc_host *host;
+
+	host = (struct esdhc_host *)param;
+
+	spin_lock(&host->lock);
+
+	DBG("esdhc_tasklet_card\n");
+	if (!(fsl_readl(host->ioaddr + ESDHC_PRESENT_STATE) &
+				ESDHC_CARD_PRESENT)) {
+		if (host->mrq) {
+			printk(KERN_ERR "%s: Card removed during transfer!\n",
+				mmc_hostname(host->mmc));
+			printk(KERN_ERR "%s: Resetting controller.\n",
+				mmc_hostname(host->mmc));
+
+			esdhc_reset(host, ESDHC_RESET_CMD);
+			esdhc_reset(host, ESDHC_RESET_DATA);
+
+			host->mrq->cmd->error = MMC_ERR_FAILED;
+			tasklet_schedule(&host->finish_tasklet);
+		}
+		host->card_insert = 0;
+	} else {
+		esdhc_reset(host, ESDHC_INIT_CARD);
+		host->card_insert = 1;
+	}
+
+	spin_unlock(&host->lock);
+
+	mmc_detect_change(host->mmc, msecs_to_jiffies(500));
+}
+
+static void esdhc_tasklet_finish(unsigned long param)
+{
+	struct esdhc_host *host;
+	unsigned long flags;
+	struct mmc_request *mrq;
+
+	host = (struct esdhc_host *)param;
+	DBG("esdhc_tasklet_finish\n");
+
+	spin_lock_irqsave(&host->lock, flags);
+
+	del_timer(&host->timer);
+
+	mrq = host->mrq;
+
+	/*
+	 * The controller needs a reset of internal state machines
+	 * upon error conditions.
+	 */
+	if ((mrq->cmd->error != MMC_ERR_NONE) ||
+		(mrq->data && ((mrq->data->error != MMC_ERR_NONE) ||
+		(mrq->data->stop &&
+			(mrq->data->stop->error != MMC_ERR_NONE))))) {
+
+		/* Some controllers need this kick or reset won't work here */
+		if (host->chip->quirks & ESDHC_QUIRK_CLOCK_BEFORE_RESET) {
+			unsigned int clock;
+
+			/* This is to force an update */
+			clock = host->clock;
+			host->clock = 0;
+			esdhc_set_clock(host, clock);
+		}
+
+		if (mrq->cmd->error != MMC_ERR_TIMEOUT) {
+			esdhc_reset(host, ESDHC_RESET_CMD);
+			esdhc_reset(host, ESDHC_RESET_DATA);
+			reset_regs(host);
+			esdhc_dumpregs(host);
+		}
+	}
+
+	host->mrq = NULL;
+	host->cmd = NULL;
+	host->data = NULL;
+
+	spin_unlock_irqrestore(&host->lock, flags);
+
+	mmc_request_done(host->mmc, mrq);
+}
+
+static void esdhc_timeout_timer(unsigned long data)
+{
+	struct esdhc_host *host;
+	unsigned long flags;
+
+	host = (struct esdhc_host *)data;
+	printk(KERN_INFO "esdhc_timeout_timer\n");
+	spin_lock_irqsave(&host->lock, flags);
+
+	if (host->mrq) {
+		if (host->data) {
+			host->data->error = MMC_ERR_TIMEOUT;
+			esdhc_finish_data(host);
+		} else {
+			if (host->cmd)
+				host->cmd->error = MMC_ERR_TIMEOUT;
+			else
+				host->mrq->cmd->error = MMC_ERR_TIMEOUT;
+			tasklet_schedule(&host->finish_tasklet);
+		}
+	}
+
+	mmiowb();
+	fsl_writel(host->ioaddr + ESDHC_INT_STATUS, 0);
+	spin_unlock_irqrestore(&host->lock, flags);
+}
+
+/*****************************************************************************\
+ *                                                                           *
+ * Interrupt handling                                                        *
+ *                                                                           *
+\*****************************************************************************/
+
+static void esdhc_cmd_irq(struct esdhc_host *host, u32 intmask)
+{
+	BUG_ON(intmask == 0);
+
+	if (!host->cmd) {
+		printk(KERN_ERR "%s: Got command interrupt even though no "
+			"command operation was in progress.\n",
+			mmc_hostname(host->mmc));
+		esdhc_dumpregs(host);
+		return;
+	}
+
+	if (intmask & ESDHC_INT_TIMEOUT) {
+		host->cmd->error = MMC_ERR_TIMEOUT;
+		DBG("esdhc_cmd_irq  MMC_ERR_TIMEOUT\n");
+		tasklet_schedule(&host->finish_tasklet);
+	} else if (intmask & ESDHC_INT_RESPONSE)
+		esdhc_finish_command(host);
+	else {
+		if (intmask & ESDHC_INT_CRC)
+			host->cmd->error = MMC_ERR_BADCRC;
+		else if (intmask & (ESDHC_INT_END_BIT | ESDHC_INT_INDEX))
+			host->cmd->error = MMC_ERR_FAILED;
+		else
+			host->cmd->error = MMC_ERR_INVALID;
+
+		tasklet_schedule(&host->finish_tasklet);
+	}
+}
+
+static void esdhc_data_irq(struct esdhc_host *host, u32 intmask)
+{
+	BUG_ON(intmask == 0);
+	if (!host->data) {
+		/*
+		 * A data end interrupt is sent together with the response
+		 * for the stop command.
+		 */
+		if ((intmask & ESDHC_INT_DATA_END) ||
+		    (intmask & ESDHC_INT_DMA_END)) {
+			return;
+		}
+		DBG("%s: Got data interrupt even though no "
+			"data operation was in progress.\n",
+			mmc_hostname(host->mmc));
+		esdhc_dumpregs(host);
+
+		return;
+	}
+
+	if (intmask & ESDHC_INT_DATA_TIMEOUT)
+		host->data->error = MMC_ERR_TIMEOUT;
+	else if (intmask & ESDHC_INT_DATA_CRC)
+		host->data->error = MMC_ERR_BADCRC;
+	else if (intmask & ESDHC_INT_DATA_END_BIT)
+		host->data->error = MMC_ERR_FAILED;
+
+	if (host->data->error != MMC_ERR_NONE) {
+		esdhc_finish_data(host);
+	} else {
+		if (intmask & (ESDHC_INT_DATA_AVAIL | ESDHC_INT_SPACE_AVAIL))
+			esdhc_transfer_pio(host);
+		/*
+		 * We currently don't do anything fancy with DMA
+		 * boundaries, but as we can't disable the feature
+		 * we need to at least restart the transfer.
+		 */
+		if (intmask & ESDHC_INT_DMA_END)
+			fsl_writel(host->ioaddr + ESDHC_DMA_ADDRESS,
+				fsl_readl(host->ioaddr + ESDHC_DMA_ADDRESS));
+		if (intmask & ESDHC_INT_DATA_END)
+			esdhc_finish_data(host);
+	}
+}
+
+static irqreturn_t esdhc_detect_irq(int irq, void *dev_id)
+{
+	irqreturn_t result;
+	struct esdhc_host *host = dev_id;
+	u8  irq_status = 0;
+
+	spin_lock(&host->lock);
+
+	irq_status = MCF_EPORT_EPPDR & 0x2;
+	DBG("***Extern IRQ %x %x %x %x %x %x\n", MCF_EPORT_EPPAR,
+		MCF_EPORT_EPDDR, MCF_EPORT_EPDR, MCF_EPORT_EPFR,
+		MCF_EPORT_EPIER, MCF_EPORT_EPPDR);
+#if defined(CONFIG_ESDHC_DETECT_USE_EXTERN_IRQ1)
+	MCF_EPORT_EPIER = MCF_EPORT_EPIER & (~MCF_EPORT_EPIER_EPIE1);
+#elif defined(CONFIG_ESDHC_DETECT_USE_EXTERN_IRQ7)
+	MCF_EPORT_EPIER = MCF_EPORT_EPIER & (~MCF_EPORT_EPIER_EPIE7);
+#else
+	MCF_EPORT_EPIER = MCF_EPORT_EPIER & (~MCF_EPORT_EPIER_EPIE7);
+#endif
+	if (irq_status == 0x0) {
+		DBG("***  Card insert interrupt Extern IRQ\n");
+		esdhc_reset(host, ESDHC_INIT_CARD);
+		host->card_insert = 1;
+	} else /*irq_status == 0x2) */{
+		DBG("***  Card removed interrupt Extern IRQ\n");
+		if (host->mrq) {
+			printk(KERN_ERR "%s: Card removed during transfer!\n",
+				mmc_hostname(host->mmc));
+			printk(KERN_ERR "%s: Resetting controller.\n",
+				mmc_hostname(host->mmc));
+
+			esdhc_reset(host, ESDHC_RESET_CMD);
+			esdhc_reset(host, ESDHC_RESET_DATA);
+
+			host->mrq->cmd->error = MMC_ERR_FAILED;
+			tasklet_schedule(&host->finish_tasklet);
+		}
+		host->card_insert = 0;
+	}
+
+	mmc_detect_change(host->mmc, msecs_to_jiffies(500));
+#if defined(CONFIG_ESDHC_DETECT_USE_EXTERN_IRQ1)
+	MCF_EPORT_EPPAR   = MCF_EPORT_EPPAR | MCF_EPORT_EPPAR_EPPA1_BOTH;
+	MCF_EPORT_EPIER   = MCF_EPORT_EPIER | MCF_EPORT_EPIER_EPIE1;
+	MCF_EPORT_EPFR    = MCF_EPORT_EPFR  | MCF_EPORT_EPFR_EPF1;
+#elif defined(CONFIG_ESDHC_DETECT_USE_EXTERN_IRQ7)
+	MCF_EPORT_EPPAR   = MCF_EPORT_EPPAR | MCF_EPORT_EPPAR_EPPA7_BOTH;
+	MCF_EPORT_EPIER   = MCF_EPORT_EPIER | MCF_EPORT_EPIER_EPIE7;
+	MCF_EPORT_EPFR    = MCF_EPORT_EPFR  | MCF_EPORT_EPFR_EPF7;
+#else
+	MCF_EPORT_EPPAR   = MCF_EPORT_EPPAR | MCF_EPORT_EPPAR_EPPA7_BOTH;
+	MCF_EPORT_EPIER   = MCF_EPORT_EPIER | MCF_EPORT_EPIER_EPIE7;
+	MCF_EPORT_EPFR    = MCF_EPORT_EPFR  | MCF_EPORT_EPFR_EPF7;
+#endif
+	DBG("***Extern IRQ return %x %x %x %x %x %x\n", MCF_EPORT_EPPAR,
+		MCF_EPORT_EPDDR, MCF_EPORT_EPDR, MCF_EPORT_EPFR,
+		MCF_EPORT_EPIER, MCF_EPORT_EPPDR);
+
+	result = IRQ_HANDLED;
+	spin_unlock(&host->lock);
+
+	return result;
+}
+
+static irqreturn_t esdhc_irq(int irq, void *dev_id)
+{
+	irqreturn_t result;
+	struct esdhc_host *host = dev_id;
+	u32 status;
+
+	spin_lock(&host->lock);
+
+	status = fsl_readl(host->ioaddr + ESDHC_INT_STATUS);
+
+	if (!status || status == 0xffffffff) {
+		result = IRQ_NONE;
+		goto out;
+	}
+
+	if (status & ESDHC_INT_CMD_MASK) {
+		fsl_writel(host->ioaddr + ESDHC_INT_STATUS,
+			status & ESDHC_INT_CMD_MASK);
+		esdhc_cmd_irq(host, status & ESDHC_INT_CMD_MASK);
+	}
+
+	if (status & ESDHC_INT_DATA_MASK) {
+		fsl_writel(host->ioaddr + ESDHC_INT_STATUS,
+			status & ESDHC_INT_DATA_MASK);
+		esdhc_data_irq(host, status & ESDHC_INT_DATA_MASK);
+	}
+
+	status &= ~(ESDHC_INT_CMD_MASK | ESDHC_INT_DATA_MASK);
+
+	if (status) {
+		printk(KERN_ERR "%s: Unexpected interrupt 0x%08x.\n",
+			mmc_hostname(host->mmc), status);
+		esdhc_dumpregs(host);
+
+		fsl_writel(host->ioaddr + ESDHC_INT_STATUS, status);
+	}
+
+	result = IRQ_HANDLED;
+
+	mmiowb();
+out:
+	spin_unlock(&host->lock);
+
+	return result;
+}
+
+/*****************************************************************************\
+ *                                                                           *
+ * Suspend/resume                                                            *
+ *                                                                           *
+\*****************************************************************************/
+
+#ifdef CONFIG_PM
+
+static int esdhc_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct esdhc_chip *chip;
+	int i, ret;
+
+	chip = platform_get_drvdata(pdev);
+	if (!chip)
+		return 0;
+
+	DBG("Suspending...");
+
+	for (i = 0; i < chip->num_slots; i++) {
+		if (!chip->hosts[i])
+			continue;
+		ret = mmc_suspend_host(chip->hosts[i]->mmc);
+		if (ret) {
+			for (i--; i >= 0; i--)
+				mmc_resume_host(chip->hosts[i]->mmc);
+			return ret;
+		}
+	}
+
+	for (i = 0; i < chip->num_slots; i++) {
+		if (!chip->hosts[i])
+			continue;
+		free_irq(chip->hosts[i]->irq, chip->hosts[i]);
+	}
+
+	return 0;
+}
+
+static int esdhc_resume(struct platform_device *pdev)
+{
+	struct esdhc_chip *chip;
+	int i, ret;
+
+	chip = platform_get_drvdata(pdev);
+	if (!chip)
+		return 0;
+
+	DBG("Resuming...");
+
+	for (i = 0; i < chip->num_slots; i++) {
+		if (!chip->hosts[i])
+			continue;
+		ret = request_irq(chip->hosts[i]->irq, esdhc_irq,
+			IRQF_SHARED, chip->hosts[i]->slot_descr,
+			chip->hosts[i]);
+		if (ret)
+			return ret;
+		esdhc_init(chip->hosts[i]);
+		mmiowb();
+		ret = mmc_resume_host(chip->hosts[i]->mmc);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+#else
+
+#define esdhc_suspend NULL
+#define esdhc_resume NULL
+
+#endif
+
+/*****************************************************************************\
+ *                                                                           *
+ * Device probing/removal                                                    *
+ *                                                                           *
+\*****************************************************************************/
+
+static int esdhc_probe_slot(struct platform_device *pdev, int slot)
+{
+	int ret;
+	unsigned int version;
+	struct esdhc_chip *chip;
+	struct mmc_host *mmc;
+	struct esdhc_host *host;
+	struct resource *res;
+
+	unsigned int caps;
+
+	chip = platform_get_drvdata(pdev);
+	BUG_ON(!chip);
+
+	mmc = mmc_alloc_host(sizeof(struct esdhc_host), &(pdev->dev));
+	if (!mmc) {
+		printk(KERN_ERR "%s mmc_alloc_host failed %x\n",
+			__func__, (unsigned int)mmc);
+		return -ENOMEM;
+	}
+
+	host = mmc_priv(mmc);
+	host->mmc = mmc;
+
+	host->chip = chip;
+	chip->hosts[slot] = host;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (res == NULL) {
+		printk(KERN_ERR "%s platform_get_resource MEM failed %x\n",
+			__func__, (unsigned int)res);
+		goto free;
+	}
+
+	host->addr = res->start;
+	host->size = res->end - res->start + 1;
+
+	host->irq =  platform_get_irq(pdev, 0);
+	if (host->irq <= 0) {
+		printk(KERN_ERR "%s platform_get_irq failed %x\n",
+			__func__, host->irq);
+		goto free;
+	}
+
+	printk(KERN_INFO "slot %d at 0x%08lx, irq %d\n",
+			slot, host->addr, host->irq);
+
+	snprintf(host->slot_descr, 20, "esdhc:slot%d", slot);
+
+	ret = (int)request_mem_region(host->addr, host->size, DRIVER_NAME);
+	if (!ret) {
+		ret = -EBUSY;
+		printk(KERN_INFO "%s request_mem_region failed %x\n",
+			__func__, (unsigned int)res);
+		goto release;
+	}
+
+	host->ioaddr = ioremap_nocache(host->addr, host->size);
+	if (!host->ioaddr) {
+		ret = -ENOMEM;
+		printk(KERN_INFO "%s ioremap_nocache failed %x\n",
+			__func__, (unsigned int)host->ioaddr);
+		goto release;
+	}
+
+	esdhc_reset(host, ESDHC_RESET_ALL);
+
+	version = fsl_readl(host->ioaddr + ESDHC_HOST_VERSION);
+	if ((version & 1) != 0x01)
+		printk(KERN_INFO "%s: Unknown controller version (%d). "
+			"You may experience problems.\n", host->slot_descr,
+			version);
+
+	caps = fsl_readl(host->ioaddr + ESDHC_CAPABILITIES);
+	printk(KERN_INFO "%s caps %x %x\n",
+		__func__, caps, (unsigned int)MCF_ESDHC_HOSTCAPBLT);
+
+#if defined(CONFIG_ESDHC_FORCE_PIO)
+	debug_nodma = 1;
+#endif
+	if (debug_nodma)
+		DBG("DMA forced off\n");
+	else if (debug_forcedma) {
+		DBG("DMA forced on\n");
+		host->flags |= ESDHC_USE_DMA;
+	} else if (chip->quirks & ESDHC_QUIRK_FORCE_DMA) {
+		DBG("Controller force DMA capability\n");
+		host->flags |= ESDHC_USE_DMA;
+	} else if (!(caps & ESDHC_CAN_DO_DMA))
+		DBG("Controller doesn't have DMA capability\n");
+	else {
+		host->flags |= ESDHC_USE_DMA;
+		DBG("Controller have DMA capability\n");
+	}
+
+	/*
+	 * Set host parameters.
+	 */
+#ifdef CONFIG_MPC5441X
+	host->max_clk = 17000000;
+#else
+	host->max_clk = 25000000;
+#endif
+
+	/* if 4 bit , freq can be 50MHz */
+	mmc->ops = &esdhc_ops;
+	mmc->f_min = 400000;
+	mmc->f_max = min((int)host->max_clk, 50000000);
+
+	mmc->caps = MMC_CAP_4_BIT_DATA;
+
+	mmc->ocr_avail = 0;
+	if (caps & ESDHC_CAN_VDD_330)
+		mmc->ocr_avail |= MMC_VDD_32_33|MMC_VDD_33_34;
+	if (caps & ESDHC_CAN_VDD_300)
+		mmc->ocr_avail |= MMC_VDD_29_30|MMC_VDD_30_31;
+	if (caps & ESDHC_CAN_VDD_180)
+		mmc->ocr_avail |= MMC_VDD_165_195;
+
+	if (mmc->ocr_avail == 0) {
+		printk(KERN_INFO "%s: Hardware doesn't report any "
+			"support voltages.\n", host->slot_descr);
+		ret = -ENODEV;
+		goto unmap;
+	}
+
+	spin_lock_init(&host->lock);
+
+	/*
+	 * Maximum number of segments. Hardware cannot do scatter lists.
+	 */
+	if (host->flags & ESDHC_USE_DMA)
+		mmc->max_segs = 1;
+	else
+		mmc->max_segs = 16;
+
+	/*
+	 * Maximum number of sectors in one transfer. Limited by DMA boundary
+	 * size (512KiB).
+	 */
+	mmc->max_req_size = 524288;
+
+	/*
+	 * Maximum segment size. Could be one segment with the maximum number
+	 * of bytes.
+	 */
+	mmc->max_seg_size = mmc->max_req_size;
+
+	/*
+	 * Maximum block size. This varies from controller to controller and
+	 * is specified in the capabilities register.
+	 */
+	mmc->max_blk_size = (caps & ESDHC_MAX_BLOCK_MASK) >>
+					ESDHC_MAX_BLOCK_SHIFT;
+	if (mmc->max_blk_size > 3) {
+		printk(KERN_INFO "%s: Invalid maximum block size.\n",
+			host->slot_descr);
+		ret = -ENODEV;
+		goto unmap;
+	}
+	mmc->max_blk_size = 512 << mmc->max_blk_size;
+
+	/*
+	 * Maximum block count.
+	 */
+	mmc->max_blk_count = /*65535*/0x80;
+
+	/*
+	 * Init tasklets.
+	 */
+	tasklet_init(&host->card_tasklet,
+		esdhc_tasklet_card, (unsigned long)host);
+	tasklet_init(&host->finish_tasklet,
+		esdhc_tasklet_finish, (unsigned long)host);
+
+	setup_timer(&host->timer, esdhc_timeout_timer, (unsigned long)host);
+
+	esdhc_init(host);
+
+	esdhc_dumpregs(host);
+
+	ret = request_irq(host->irq, esdhc_irq, IRQF_DISABLED,
+		host->slot_descr, host);
+	if (ret) {
+		printk(KERN_INFO "%s: request irq fail %x\n", __func__, ret);
+		goto untasklet;
+	}
+
+	ret = request_irq(card_detect_extern_irq,
+			esdhc_detect_irq, IRQF_DISABLED,
+			host->slot_descr, host);
+	if (ret) {
+		printk(KERN_INFO "%s: request irq fail %x\n", __func__, ret);
+		goto untasklet1;
+	}
+
+	mmiowb();
+
+	ret = mmc_add_host(mmc);
+	if (ret) {
+		printk(KERN_INFO "%s: mmc_add_host fail %x\n", __func__, ret);
+		goto unaddhost;
+	}
+
+	printk(KERN_INFO "%s: ESDHC at 0x%08lx irq %d %s\n", mmc_hostname(mmc),
+		host->addr, host->irq,
+		(host->flags & ESDHC_USE_DMA) ? "DMA" : "PIO");
+
+#ifdef ESDHC_DMA_KMALLOC
+	host->dma_tx_buf = kmalloc(ESDHC_DMA_SIZE, GFP_DMA);
+	host->dma_tx_dmahandle = virt_to_phys(host->dma_tx_buf);
+#else
+	host->dma_tx_buf = dma_alloc_coherent(NULL, ESDHC_DMA_SIZE,
+		&host->dma_tx_dmahandle, GFP_DMA|GFP_KERNEL);
+#endif
+
+	if (((unsigned int)host->dma_tx_buf == 0) ||
+	    ((unsigned int)host->dma_tx_dmahandle == 0))
+		printk(KERN_ERR "%s DMA alloc error\n", __func__);
+
+	return 0;
+
+unaddhost:
+	free_irq(card_detect_extern_irq, host);
+untasklet1:
+	free_irq(host->irq, host);
+untasklet:
+	tasklet_kill(&host->card_tasklet);
+	tasklet_kill(&host->finish_tasklet);
+unmap:
+	iounmap(host->ioaddr);
+release:
+	release_mem_region(host->addr, host->size);
+free:
+	mmc_free_host(mmc);
+
+	return ret;
+}
+
+static void esdhc_remove_slot(struct platform_device *pdev, int slot)
+{
+	struct esdhc_chip *chip;
+	struct mmc_host *mmc;
+	struct esdhc_host *host;
+
+	chip = platform_get_drvdata(pdev);
+	host = chip->hosts[slot];
+	mmc = host->mmc;
+
+	chip->hosts[slot] = NULL;
+
+	mmc_remove_host(mmc);
+
+	esdhc_reset(host, ESDHC_RESET_ALL);
+
+	free_irq(card_detect_extern_irq, host);
+
+	free_irq(host->irq, host);
+
+	del_timer_sync(&host->timer);
+
+	tasklet_kill(&host->card_tasklet);
+	tasklet_kill(&host->finish_tasklet);
+
+	iounmap(host->ioaddr);
+
+	release_mem_region(host->addr, host->size);
+
+	mmc_free_host(mmc);
+	DBG("%s: Exit....\n", __func__);
+}
+
+static int __init esdhc_probe(struct platform_device *pdev)
+{
+	int ret, i;
+	u8 slots;
+	struct esdhc_chip *chip;
+
+	BUG_ON(pdev == NULL);
+
+	/* Slew Rate */
+	MCF_GPIO_SRCR_SDHC = 3;
+	MCF_GPIO_SRCR_IRQ0 = 3;
+
+	/* Port Configuration */
+	MCF_GPIO_PAR_ESDHCH = 0xFF;     /* DAT[3:0] */
+	MCF_GPIO_PAR_ESDHCL = 0x0F;     /* CMD, CLK */
+
+	MCF_ESDHC_VSR = 2;              /* disabled adma and set 3.0V */
+
+	MCF_INTC2_ICR31 = 2;            /* SDHC irqstat */
+#if defined(CONFIG_ESDHC_DETECT_USE_EXTERN_IRQ1)
+	/*this is irq1 hardware work round*/
+	MCF_GPIO_PAR_IRQ0H |= 0x3;
+
+	MCF_EPORT_EPPAR   = MCF_EPORT_EPPAR | MCF_EPORT_EPPAR_EPPA1_BOTH;
+	MCF_EPORT_EPIER   = MCF_EPORT_EPIER | MCF_EPORT_EPIER_EPIE1;
+
+	MCF_INTC0_ICR1  = 7;           /* IRQ1 */
+	DBG("MCF_INTC0_ICR1 %x MCF_EPORT_EPPAR %x "
+		"MCF_EPORT_EPFR %x MCF_EPORT_EPIER %x "
+		"MCF_INTC0_IMRL %x MCF_INTC0_INTFRCL %x "
+		"MCF_INTC0_IPRL %x\n",
+			MCF_INTC0_ICR1, MCF_EPORT_EPPAR, MCF_EPORT_EPFR,
+			MCF_EPORT_EPIER, MCF_INTC0_IMRL, MCF_INTC0_INTFRCL,
+			MCF_INTC0_IPRL);
+#elif defined(CONFIG_ESDHC_DETECT_USE_EXTERN_IRQ7)
+	MCF_GPIO_PAR_IRQ0H |= MCF_GPIO_PAR_IRQH_IRQ7;
+
+	MCF_EPORT_EPPAR   = MCF_EPORT_EPPAR | MCF_EPORT_EPPAR_EPPA7_BOTH;
+	MCF_EPORT_EPIER   = MCF_EPORT_EPIER | MCF_EPORT_EPIER_EPIE7;
+
+	MCF_INTC0_ICR7  = 2;           /* IRQ7 */
+	DBG("MCF_INTC0_ICR7 %x MCF_EPORT_EPPAR %x\n",
+		MCF_INTC0_ICR7, MCF_EPORT_EPPAR);
+#else
+	MCF_GPIO_PAR_IRQ0H |= MCF_GPIO_PAR_IRQH_IRQ7;
+
+	MCF_EPORT_EPPAR   = MCF_EPORT_EPPAR | MCF_EPORT_EPPAR_EPPA7_BOTH;
+	MCF_EPORT_EPIER   = MCF_EPORT_EPIER | MCF_EPORT_EPIER_EPIE7;
+
+	MCF_INTC0_ICR7  = 2;           /* IRQ7 */
+	DBG("MCF_INTC0_ICR1 %x MCF_EPORT_EPPAR %x\n",
+		MCF_INTC0_ICR7, MCF_EPORT_EPPAR);
+#endif
+
+	slots = ESDHC_SLOTS_NUMBER;
+	DBG("found %d slot(s)\n", slots);
+	if (slots == 0) {
+		printk(KERN_INFO "%s: slot err %d\n", __func__, slots);
+		return -ENODEV;
+	}
+
+	chip = kmalloc(sizeof(struct esdhc_chip) +
+		sizeof(struct esdhc_host *) * slots, GFP_KERNEL);
+	if (!chip) {
+		ret = -ENOMEM;
+		printk(KERN_ERR "%s: kmalloc fail %x\n", __func__,
+			(unsigned int)chip);
+		goto err;
+	}
+
+	memset(chip, 0,
+		sizeof(struct esdhc_chip) +
+		sizeof(struct esdhc_host *) * slots);
+
+	chip->pdev = pdev;
+	chip->quirks = ESDHC_QUIRK_NO_CARD_NO_RESET;
+
+	if (debug_quirks)
+		chip->quirks = debug_quirks;
+
+	chip->num_slots = slots;
+	platform_set_drvdata(pdev, chip);
+
+	for (i = 0; i < slots; i++) {
+		ret = esdhc_probe_slot(pdev, i);
+		if (ret) {
+			for (i--; i >= 0; i--)
+				esdhc_remove_slot(pdev, i);
+			goto free;
+		}
+	}
+
+	return 0;
+
+free:
+	platform_set_drvdata(pdev, NULL);
+	kfree(chip);
+
+err:
+	return ret;
+}
+
+static int esdhc_remove(struct platform_device *pdev)
+{
+	int i;
+	struct esdhc_chip *chip;
+
+	chip = platform_get_drvdata(pdev);
+
+	if (chip) {
+		for (i = 0; i < chip->num_slots; i++)
+			esdhc_remove_slot(pdev, i);
+
+		platform_set_drvdata(pdev, NULL);
+
+		kfree(chip);
+	}
+
+	return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+static struct platform_driver esdhc_driver = {
+	.probe	=	esdhc_probe,
+	.remove =	esdhc_remove,
+	.suspend =	esdhc_suspend,
+	.resume	=	esdhc_resume,
+	.driver	= {
+			.name   = DRIVER_NAME,
+			.owner  = THIS_MODULE,
+	},
+};
+
+/*****************************************************************************\
+ *                                                                           *
+ * Driver init/exit                                                          *
+ *                                                                           *
+\*****************************************************************************/
+
+static int __init esdhc_drv_init(void)
+{
+	printk(KERN_INFO DRIVER_NAME
+		": Freescale Enhanced Secure Digital Host"
+		" Controller driver\n");
+
+	return platform_driver_register(&esdhc_driver);
+}
+
+static void __exit esdhc_drv_exit(void)
+{
+	printk(KERN_INFO DRIVER_NAME
+		": Freescale Enhanced Secure Digital Host"
+		" Controller driver exit\n");
+	platform_driver_unregister(&esdhc_driver);
+}
+
+module_init(esdhc_drv_init);
+module_exit(esdhc_drv_exit);
+
+module_param(debug_nodma, uint, 0444);
+module_param(debug_forcedma, uint, 0444);
+module_param(debug_quirks, uint, 0444);
+
+MODULE_AUTHOR("Chenghu Wu<b16972@freescale.com>");
+MODULE_DESCRIPTION("Enhanced Secure Digital Host Controller driver");
+MODULE_LICENSE("GPL");
+
+MODULE_PARM_DESC(debug_nodma, "Forcefully disable DMA transfers.");
+MODULE_PARM_DESC(debug_forcedma, "Forcefully enable DMA transfers.");
+MODULE_PARM_DESC(debug_quirks, "Force certain quirks.");
--- /dev/null
+++ b/drivers/mmc/host/esdhc.h
@@ -0,0 +1,310 @@
+/*
+ * Copyright (C) 2008-2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ *  Author: Chenghu Wu <b16972@freescale.com>
+ *	     Xiaobo Xie <X.Xie@freescale.com>
+ *
+ * Based on mpc837x/driver/mmc/host/esdhc.c done by Xiaobo Xie
+ * Ported to Coldfire platform by Chenghu Wu
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+#ifndef ESDHC_H
+#define ESDHC_H
+
+#define MMC_ERR_NONE    0
+#define MMC_ERR_TIMEOUT 1
+#define MMC_ERR_BADCRC  2
+#define MMC_ERR_FIFO    3
+#define MMC_ERR_FAILED  4
+#define MMC_ERR_INVALID 5
+
+#define MCF_CLOCK_PLL_DR        (*(volatile unsigned long *)(0xFC0C0004))
+#define MCF_ESDHC_HOSTCAPBLT    (*(volatile unsigned long *)(0xFC0CC040))
+#define MCF_ESDHC_ADMAESR       (*(volatile unsigned long *)(0xFC0CC054))
+#define MCF_ESDHC_ADMASAR       (*(volatile unsigned long *)(0xFC0CC058))
+#define MCF_ESDHC_VSR           (*(volatile unsigned long *)(0xFC0CC0C0))
+#define MCF_ESDHC_HOSTVER       (*(volatile unsigned long *)(0xFC0CC0FC))
+/*
+ * Controller registers (Big Endian)
+ */
+
+#define MCF_GPIO_PAR_SDHC_DATA3   0x20
+#define MCF_GPIO_PAR_SDHC_DATA2   0x10
+#define MCF_GPIO_PAR_SDHC_DATA1   0x08
+#define MCF_GPIO_PAR_SDHC_DATA0   0x04
+#define MCF_GPIO_PAR_SDHC_CMD     0x02
+#define MCF_GPIO_PAR_SDHC_CLK     0x01
+
+
+#define MCF_GPIO_SRCR_SDHC_LOWEST    0x00
+#define MCF_GPIO_SRCR_SDHC_LOWE      0x01
+#define MCF_GPIO_SRCR_SDHC_HIGH      0x02
+#define MCF_GPIO_SRCR_SDHC_HIGHEST   0x03
+
+
+#define MCF_GPIO_PCRL_SDHC_DATA3   0x80
+#define MCF_GPIO_PCRL_SDHC_DATA2   0x40
+#define MCF_GPIO_PCRL_SDHC_DATA1   0x20
+#define MCF_GPIO_PCRL_SDHC_DATA0   0x10
+#define MCF_GPIO_PCRL_SDHC_CMD     0x08
+#define MCF_GPIO_PCRL_SDHC_CLK     0x04
+
+#define MCF_INT_SDHC               63
+/* DMA System Address Register */
+#define ESDHC_DMA_ADDRESS	0x00
+
+/* Block Attributes Register */
+#define ESDHC_BLOCK_ATTR	0x04
+#define ESDHC_BLOCK_SIZE_MASK	0x00000fff
+#define ESDHC_BLCOK_CNT_MASK	0xffff0000
+#define ESDHC_MAKE_BLKSZ(dma, blksz) (((dma & 0x7) << 12) | (blksz & 0xFFF))
+
+/* Command Argument */
+#define ESDHC_ARGUMENT		0x08
+
+/* Transfer Type Register */
+#define ESDHC_COMMAND		0x0C
+
+#define ESDHC_TRNS_DMA		0x00000001
+#define ESDHC_TRNS_BLK_CNT_EN	0x00000002
+#define ESDHC_TRNS_ACMD12	0x00000004
+#define ESDHC_TRNS_READ		0x00000010
+#define ESDHC_TRNS_MULTI	0x00000020
+
+#define ESDHC_CMD_RESP_MASK	0x00030000
+#define ESDHC_CMD_CRC_EN	0x00080000
+#define ESDHC_CMD_INDEX_EN	0x00100000
+#define ESDHC_CMD_DATA		0x00200000
+#define ESDHC_CMD_TYPE_MASK	0x00c00000
+#define ESDHC_CMD_INDEX		0x3f000000
+
+#define ESDHC_CMD_RESP_NONE	0x00000000
+#define ESDHC_CMD_RESP_LONG	0x00010000
+#define ESDHC_CMD_RESP_SHORT	0x00020000
+#define ESDHC_CMD_RESP_SHORT_BUSY 0x00030000
+
+#define ESDHC_MAKE_CMD(c, f) (((c & 0xff) << 24) | (f & 0xfb0037))
+
+/* Response Register */
+#define ESDHC_RESPONSE		0x10
+
+/* Buffer Data Port Register */
+#define ESDHC_BUFFER		0x20
+
+/* Present State Register */
+#define ESDHC_PRESENT_STATE	0x24
+#define  ESDHC_CMD_INHIBIT	0x00000001
+#define  ESDHC_DATA_INHIBIT	0x00000002
+#define  ESDHC_DOING_WRITE	0x00000100
+#define  ESDHC_DOING_READ	0x00000200
+#define  ESDHC_SPACE_AVAILABLE	0x00000400
+#define  ESDHC_DATA_AVAILABLE	0x00000800
+#define  ESDHC_CARD_PRESENT	0x00010000
+#define  ESDHC_WRITE_PROTECT	0x00080000
+
+/* Protocol control Register */
+#define ESDHC_PROTOCOL_CONTROL	0x28
+
+#define ESDHC_CTRL_BUS_MASK	0x00000006
+#define ESDHC_CTRL_4BITBUS	0x00000002
+#define ESDHC_CTRL_D3_DETEC	0x00000008
+#define ESDHC_CTRL_DTCT_EN	0x00000080
+#define ESDHC_CTRL_DTCT_STATUS	0x00000040
+#define ESDHC_CTRL_WU_CRM	0x04000000
+#define ESDHC_CTRL_WU_CINS	0x02000000
+#define ESDHC_CTRL_WU_CINT	0x01000000
+
+/* System Control Register */
+#define ESDHC_SYSTEM_CONTROL	0x2C
+
+#define ESDHC_CLOCK_MASK	0x0000fff0
+#define ESDHC_CLOCK_DEFAULT	0x00008000
+#define ESDHC_PREDIV_SHIFT	8
+#define ESDHC_DIVIDER_SHIFT	4
+#define ESDHC_CLOCK_CARD_EN	0x00000004
+#define ESDHC_CLOCK_INT_STABLE	0x00000002
+#define ESDHC_CLOCK_INT_EN	0x00000001
+
+#define ESDHC_TIMEOUT_MASK	0x000f0000
+#define ESDHC_TIMEOUT_SHIFT	16
+
+#define ESDHC_RESET_SHIFT	24
+#define ESDHC_RESET_ALL		0x01
+#define ESDHC_RESET_CMD		0x02
+#define ESDHC_RESET_DATA	0x04
+#define ESDHC_INIT_CARD		0x08
+
+/* Interrupt Register */
+#define ESDHC_INT_STATUS	0x30
+#define ESDHC_INT_ENABLE	0x34
+#define ESDHC_SIGNAL_ENABLE	0x38
+
+#define ESDHC_INT_RESPONSE	0x00000001
+#define ESDHC_INT_DATA_END	0x00000002
+#define ESDHC_INT_DMA_END	0x00000008
+#define ESDHC_INT_SPACE_AVAIL	0x00000010
+#define ESDHC_INT_DATA_AVAIL	0x00000020
+#define ESDHC_INT_CARD_INSERT	0x00000040
+#define ESDHC_INT_CARD_REMOVE	0x00000080
+#define ESDHC_INT_CARD_INT	0x00000100
+
+#define ESDHC_INT_TIMEOUT	0x00010000
+#define ESDHC_INT_CRC		0x00020000
+#define ESDHC_INT_END_BIT	0x00040000
+#define ESDHC_INT_INDEX		0x00080000
+#define ESDHC_INT_DATA_TIMEOUT	0x00100000
+#define ESDHC_INT_DATA_CRC	0x00200000
+#define ESDHC_INT_DATA_END_BIT	0x00400000
+#define ESDHC_INT_ACMD12ERR	0x01000000
+#define ESDHC_INT_DMAERR	0x10000000
+
+#define ESDHC_INT_NORMAL_MASK	0x00007FFF
+#define ESDHC_INT_ERROR_MASK	0xFFFF8000
+
+#define ESDHC_INT_CMD_MASK	(ESDHC_INT_RESPONSE | ESDHC_INT_TIMEOUT | \
+		ESDHC_INT_CRC | ESDHC_INT_END_BIT | ESDHC_INT_INDEX)
+#define ESDHC_INT_DATA_MASK	(ESDHC_INT_DATA_END | ESDHC_INT_DMA_END | \
+		ESDHC_INT_DATA_AVAIL | ESDHC_INT_SPACE_AVAIL | \
+		ESDHC_INT_DATA_TIMEOUT | ESDHC_INT_DATA_CRC | \
+		ESDHC_INT_DATA_END_BIT)
+
+#define ESDHC_INT_INSERT_MASK (ESDHC_INT_DATA_END_BIT | ESDHC_INT_DATA_CRC | \
+		ESDHC_INT_DATA_TIMEOUT | ESDHC_INT_INDEX | \
+		ESDHC_INT_END_BIT | ESDHC_INT_CRC | ESDHC_INT_TIMEOUT | \
+		ESDHC_INT_DATA_AVAIL | ESDHC_INT_SPACE_AVAIL | \
+		ESDHC_INT_DMA_END | ESDHC_INT_DATA_END | \
+		ESDHC_INT_RESPONSE | ESDHC_INT_CARD_REMOVE)
+
+#define ESDHC_INT_REMOVE_MASK (ESDHC_INT_DATA_END_BIT | ESDHC_INT_DATA_CRC | \
+		ESDHC_INT_DATA_TIMEOUT | ESDHC_INT_INDEX | \
+		ESDHC_INT_END_BIT | ESDHC_INT_CRC | ESDHC_INT_TIMEOUT | \
+		ESDHC_INT_DATA_AVAIL | ESDHC_INT_SPACE_AVAIL | \
+		ESDHC_INT_DMA_END | ESDHC_INT_DATA_END | \
+		ESDHC_INT_RESPONSE | ESDHC_INT_CARD_INSERT)
+
+/* Auto CMD12 Error Status Register */
+#define ESDHC_ACMD12_ERR	0x3C
+
+/* 3E-3F reserved */
+/* Host Controller Capabilities */
+#define ESDHC_CAPABILITIES	0x40
+
+#define ESDHC_MAX_BLOCK_MASK	0x00070000
+#define ESDHC_MAX_BLOCK_SHIFT	16
+#define ESDHC_CAN_DO_HISPD	0x00200000
+#define ESDHC_CAN_DO_DMA	0x00400000
+#define ESDHC_CAN_DO_SUSPEND	0x00800000
+#define ESDHC_CAN_VDD_330	0x01000000
+#define ESDHC_CAN_VDD_300	0x02000000
+#define ESDHC_CAN_VDD_180	0x04000000
+
+/* Watermark Level Register */
+#define ESDHC_WML		0x44
+#define ESDHC_WML_MASK		0xff
+#define ESDHC_WML_READ_SHIFT	0
+#define ESDHC_WML_WRITE_SHIFT	16
+
+/* 45-4F reserved for more caps and max curren*/
+
+/* Force Event Register */
+#define ESDHC_FORCE_EVENT	0x50
+
+/* 54-FB reserved */
+
+/* Host Controller Version Register */
+#define ESDHC_HOST_VERSION	0xFC
+
+#define ESDHC_VENDOR_VER_MASK	0xFF00
+#define ESDHC_VENDOR_VER_SHIFT	8
+#define ESDHC_SPEC_VER_MASK	0x00FF
+#define ESDHC_SPEC_VER_SHIFT	0
+
+#define ESDHC_DMA_SYSCTL	0x40C
+#define ESDHC_DMA_SNOOP		0x00000040
+
+#define ESDHC_SLOTS_NUMBER	1
+
+/* The SCCR[SDHCCM] Register */
+#define MPC837X_SCCR_OFFS	0xA08
+#define MPC837X_SDHCCM_MASK	0x0c000000
+#define MPC837X_SDHCCM_SHIFT	26
+
+#define esdhc_readl(addr) \
+	({ unsigned int __v = (*(volatile unsigned int *) (addr)); __v; })
+
+#define esdhc_writel(b, addr) (void)((*(volatile unsigned int *) (addr)) = (b))
+
+static inline u32 fsl_readl(unsigned __iomem *addr)
+{
+	u32 val;
+	/*val = inl(addr);*/
+	val = esdhc_readl(addr);
+	return val;
+}
+
+static inline void fsl_writel(unsigned __iomem *addr, u32 val)
+{
+	/*outl(val, addr);*/
+	esdhc_writel(val, addr);
+}
+
+#define setbits32(_addr, _v) outl((_addr), inl(_addr) |  (_v))
+#define clrbits32(_addr, _v) outl((_addr), inl(_addr) & ~(_v))
+
+struct esdhc_chip;
+
+struct esdhc_host {
+	struct esdhc_chip	*chip;
+	struct mmc_host		*mmc;		/* MMC structure */
+
+	spinlock_t		lock;		/* Mutex */
+
+	int			flags;		/* Host attributes */
+#define ESDHC_USE_DMA		(1<<0)
+
+	unsigned int		max_clk;	/* Max possible freq (MHz) */
+	unsigned int		timeout_clk;	/* Timeout freq (KHz) */
+
+	unsigned int		clock;		/* Current clock (MHz) */
+	unsigned short		power;		/* Current voltage */
+	unsigned short		bus_width;	/* current bus width */
+
+	struct mmc_request	*mrq;		/* Current request */
+	struct mmc_command	*cmd;		/* Current command */
+	struct mmc_data		*data;		/* Current data request */
+
+	struct scatterlist	*cur_sg;	/* We're working on this */
+	int			num_sg;		/* Entries left */
+	int			offset;		/* Offset into current sg */
+	int			remain;		/* Bytes left in current */
+
+	char			slot_descr[20];	/* Name for reservations */
+
+	int			card_insert;
+
+	int			irq;		/* Device IRQ */
+	unsigned long		addr;		/* Bus address */
+	unsigned int		size;		/* IO size */
+	void __iomem		*ioaddr;	/* Mapped address */
+
+	struct tasklet_struct	card_tasklet;	/* Tasklet structures */
+	struct tasklet_struct	finish_tasklet;
+
+	struct timer_list	timer;		/* Timer for timeouts */
+	void			*dma_tx_buf;
+	dma_addr_t		dma_tx_dmahandle;
+};
+
+struct esdhc_chip {
+	struct platform_device	*pdev;
+
+	unsigned long		quirks;
+
+	int			num_slots;	/* Slots on controller */
+	struct esdhc_host	*hosts[0];	/* Pointers to hosts */
+};
+
+#endif