summaryrefslogtreecommitdiffstats
path: root/target/linux/brcm-2.4/patches/008-b44_bcm47xx_support.patch
blob: 3af606642d4b3e8159b40d61454d89b18c1a9d2c (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
diff -urN linux.old/drivers/net/b44.c linux.dev/drivers/net/b44.c
--- linux.old/drivers/net/b44.c	2006-01-16 21:10:55.873911750 +0100
+++ linux.dev/drivers/net/b44.c	2006-01-16 21:16:02.041046000 +0100
@@ -1,7 +1,9 @@
 /* b44.c: Broadcom 4400 device driver.
  *
  * Copyright (C) 2002 David S. Miller (davem@redhat.com)
- * Fixed by Pekka Pietikainen (pp@ee.oulu.fi)
+ * Copyright (C) 2004 Pekka Pietikainen (pp@ee.oulu.fi)
+ * Copyright (C) 2004 Florian Schirmer (jolt@tuxbox.org)
+ * Copyright (C) 2006 Felix Fietkau (nbd@openwrt.org)
  *
  * Distribute under GPL.
  */
@@ -25,6 +27,41 @@
 
 #include "b44.h"
 
+#include <typedefs.h>
+#include <bcmdevs.h>
+#include <bcmutils.h>
+#include <osl.h>
+#include <bcmutils.h>
+#include <bcmnvram.h>
+#include <sbconfig.h>
+#include <sbchipc.h>
+#include <sflash.h>
+
+#ifdef CONFIG_BCM947XX
+#define atoi(str) simple_strtoul(((str != NULL) ? str : ""), NULL, 0)
+ 
+static inline void e_aton(char *str, char *dest)
+{
+	int i = 0;
+	u16 *d = (u16 *) dest;
+
+	if (str == NULL) {
+		memset(dest, 0, 6);
+		return;
+	}
+	
+	for (;;) {
+		dest[i++] = (char) simple_strtoul(str, NULL, 16);
+		str += 2;
+		if (!*str++ || i == 6)
+			break;
+	}
+}
+
+static int instance = 0;
+#endif
+
+
 #define DRV_MODULE_NAME		"b44"
 #define PFX DRV_MODULE_NAME	": "
 #define DRV_MODULE_VERSION	"0.93"
@@ -75,7 +112,7 @@
 	DRV_MODULE_NAME ".c:v" DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n";
 
 MODULE_AUTHOR("David S. Miller (davem@redhat.com)");
-MODULE_DESCRIPTION("Broadcom 4400 10/100 PCI ethernet driver");
+MODULE_DESCRIPTION("Broadcom 4400/47xx 10/100 PCI ethernet driver");
 MODULE_LICENSE("GPL");
 MODULE_PARM(b44_debug, "i");
 MODULE_PARM_DESC(b44_debug, "B44 bitmapped debugging message enable value");
@@ -89,6 +126,8 @@
 	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
 	{ PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_BCM4401B1,
 	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
+	{ PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_BCM4713,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
 	{ }	/* terminate list with empty entry */
 };
 
@@ -236,6 +275,8 @@
 	udelay(1);
 }
 
+static int b44_4713_instance;
+
 static int ssb_core_unit(struct b44 *bp)
 {
 #if 0
@@ -258,6 +299,9 @@
 		break;
 	};
 #endif
+	if (bp->pdev->device == PCI_DEVICE_ID_BCM4713)
+		return b44_4713_instance++;
+	else
 	return 0;
 }
 
@@ -267,6 +311,28 @@
 		== SBTMSLOW_CLOCK);
 }
 
+static inline void __b44_cam_read(struct b44 *bp, unsigned char *data, int index)
+{
+	u32 val;
+
+	bw32(B44_CAM_CTRL, (CAM_CTRL_READ |
+			    (index << CAM_CTRL_INDEX_SHIFT)));
+
+	b44_wait_bit(bp, B44_CAM_CTRL, CAM_CTRL_BUSY, 100, 1);
+
+	val = br32(B44_CAM_DATA_LO);
+
+	data[2] = (val >> 24) & 0xFF;
+	data[3] = (val >> 16) & 0xFF;
+	data[4] = (val >> 8) & 0xFF;
+	data[5] = (val >> 0) & 0xFF;
+
+	val = br32(B44_CAM_DATA_HI);
+
+	data[0] = (val >> 8) & 0xFF;
+	data[1] = (val >> 0) & 0xFF;
+}
+
 static void __b44_cam_write(struct b44 *bp, unsigned char *data, int index)
 {
 	u32 val;
@@ -303,14 +369,14 @@
 	bw32(B44_IMASK, bp->imask);
 }
 
-static int b44_readphy(struct b44 *bp, int reg, u32 *val)
+static int __b44_readphy(struct b44 *bp, int phy_addr, int reg, u32 *val)
 {
 	int err;
 
 	bw32(B44_EMAC_ISTAT, EMAC_INT_MII);
 	bw32(B44_MDIO_DATA, (MDIO_DATA_SB_START |
 			     (MDIO_OP_READ << MDIO_DATA_OP_SHIFT) |
-			     (bp->phy_addr << MDIO_DATA_PMD_SHIFT) |
+			     (phy_addr << MDIO_DATA_PMD_SHIFT) |
 			     (reg << MDIO_DATA_RA_SHIFT) |
 			     (MDIO_TA_VALID << MDIO_DATA_TA_SHIFT)));
 	err = b44_wait_bit(bp, B44_EMAC_ISTAT, EMAC_INT_MII, 100, 0);
@@ -319,23 +385,42 @@
 	return err;
 }
 
-static int b44_writephy(struct b44 *bp, int reg, u32 val)
+static int b44_readphy(struct b44 *bp, int reg, u32 *val)
+{
+	if (bp->phy_addr == B44_PHY_ADDR_NO_PHY)
+		return 0;
+
+	return __b44_readphy(bp, bp->phy_addr, reg, val);
+}
+
+static int __b44_writephy(struct b44 *bp, int phy_addr, int reg, u32 val)
 {
 	bw32(B44_EMAC_ISTAT, EMAC_INT_MII);
 	bw32(B44_MDIO_DATA, (MDIO_DATA_SB_START |
 			     (MDIO_OP_WRITE << MDIO_DATA_OP_SHIFT) |
-			     (bp->phy_addr << MDIO_DATA_PMD_SHIFT) |
+			     (phy_addr << MDIO_DATA_PMD_SHIFT) |
 			     (reg << MDIO_DATA_RA_SHIFT) |
 			     (MDIO_TA_VALID << MDIO_DATA_TA_SHIFT) |
 			     (val & MDIO_DATA_DATA)));
 	return b44_wait_bit(bp, B44_EMAC_ISTAT, EMAC_INT_MII, 100, 0);
 }
 
+static int b44_writephy(struct b44 *bp, int reg, u32 val)
+{
+	if (bp->phy_addr == B44_PHY_ADDR_NO_PHY)
+		return 0;
+		
+	return __b44_writephy(bp, bp->phy_addr, reg, val);
+}
+
 static int b44_phy_reset(struct b44 *bp)
 {
 	u32 val;
 	int err;
 
+	if (bp->phy_addr == B44_PHY_ADDR_NO_PHY)
+		return 0;
+
 	err = b44_writephy(bp, MII_BMCR, BMCR_RESET);
 	if (err)
 		return err;
@@ -405,6 +490,24 @@
 {
 	u32 val;
 	int err;
+	char *s;
+
+#ifdef CONFIG_BCM947XX
+	/*
+	 * workaround for bad hardware design in Linksys WAP54G v1.0
+	 * see https://dev.openwrt.org/ticket/146
+	 * check and reset bit "isolate"
+	 */
+	if ((bp->pdev->device == PCI_DEVICE_ID_BCM4713) &&
+			(atoi(nvram_get("boardnum")) == 2) &&
+			(__b44_readphy(bp, 0, MII_BMCR, &val) == 0) && 
+			(val & BMCR_ISOLATE) &&
+			(__b44_writephy(bp, 0, MII_BMCR, val & ~BMCR_ISOLATE) != 0)) {
+		printk(KERN_WARNING PFX "PHY: cannot reset MII transceiver isolate bit.\n");
+	}
+#endif
+	if (bp->phy_addr == B44_PHY_ADDR_NO_PHY)
+		return 0;
 
 	if ((err = b44_readphy(bp, B44_MII_ALEDCTRL, &val)) != 0)
 		goto out;
@@ -498,6 +601,19 @@
 {
 	u32 bmsr, aux;
 
+	if (bp->phy_addr == B44_PHY_ADDR_NO_PHY) {
+		bp->flags |= B44_FLAG_100_BASE_T;
+		bp->flags |= B44_FLAG_FULL_DUPLEX;
+		if (!netif_carrier_ok(bp->dev)) {
+			u32 val = br32(B44_TX_CTRL);
+			val |= TX_CTRL_DUPLEX;
+			bw32(B44_TX_CTRL, val);
+			netif_carrier_on(bp->dev);
+			b44_link_report(bp);
+		}
+		return;
+	}
+
 	if (!b44_readphy(bp, MII_BMSR, &bmsr) &&
 	    !b44_readphy(bp, B44_MII_AUXCTRL, &aux) &&
 	    (bmsr != 0xffff)) {
@@ -1092,6 +1208,8 @@
 /* bp->lock is held. */
 static void b44_chip_reset(struct b44 *bp)
 {
+	unsigned int sb_clock;
+
 	if (ssb_is_core_up(bp)) {
 		bw32(B44_RCV_LAZY, 0);
 		bw32(B44_ENET_CTRL, ENET_CTRL_DISABLE);
@@ -1105,9 +1223,10 @@
 		bw32(B44_DMARX_CTRL, 0);
 		bp->rx_prod = bp->rx_cons = 0;
 	} else {
-		ssb_pci_setup(bp, (bp->core_unit == 0 ?
-				   SBINTVEC_ENET0 :
-				   SBINTVEC_ENET1));
+		/*if (bp->pdev->device != PCI_DEVICE_ID_BCM4713)*/
+			ssb_pci_setup(bp, (bp->core_unit == 0 ?
+				   	SBINTVEC_ENET0 :
+				   	SBINTVEC_ENET1));
 	}
 
 	ssb_core_reset(bp);
@@ -1115,6 +1234,11 @@
 	b44_clear_stats(bp);
 
 	/* Make PHY accessible. */
+	if (bp->pdev->device == PCI_DEVICE_ID_BCM4713)
+		sb_clock = 100000000; /* 100 MHz */
+	else
+		sb_clock = 62500000; /* 62.5 MHz */
+
 	bw32(B44_MDIO_CTRL, (MDIO_CTRL_PREAMBLE |
 			     (0x0d & MDIO_CTRL_MAXF_MASK)));
 	br32(B44_MDIO_CTRL);
@@ -1628,7 +1752,7 @@
 		u32 mii_regval;
 
 		spin_lock_irq(&bp->lock);
-		err = b44_readphy(bp, data->reg_num & 0x1f, &mii_regval);
+		err = __b44_readphy(bp, data->phy_id & 0x1f, data->reg_num & 0x1f, &mii_regval);
 		spin_unlock_irq(&bp->lock);
 
 		data->val_out = mii_regval;
@@ -1641,7 +1765,7 @@
 			return -EPERM;
 
 		spin_lock_irq(&bp->lock);
-		err = b44_writephy(bp, data->reg_num & 0x1f, data->val_in);
+		err = __b44_writephy(bp, data->phy_id & 0x1f, data->reg_num & 0x1f, data->val_in);
 		spin_unlock_irq(&bp->lock);
 
 		return err;
@@ -1668,21 +1792,52 @@
 static int __devinit b44_get_invariants(struct b44 *bp)
 {
 	u8 eeprom[128];
+	u8 buf[32];
 	int err;
+	unsigned long flags;
 
-	err = b44_read_eeprom(bp, &eeprom[0]);
-	if (err)
-		goto out;
+	if (bp->pdev->device == PCI_DEVICE_ID_BCM4713) {
+		/* 
+		 * BCM47xx boards don't have a EEPROM. The MAC is stored in
+		 * a NVRAM area somewhere in the flash memory.
+		 */
+		sprintf(buf, "et%dmacaddr", b44_4713_instance);
+		if (nvram_get(buf)) {
+			e_aton(nvram_get(buf), bp->dev->dev_addr);
+		} else {
+			/*
+			 * Getting the MAC out of NVRAM failed. To make it work
+			 * here, we simply rely on the bootloader to write the
+			 * MAC into the CAM.
+			 */
+			spin_lock_irqsave(&bp->lock, flags);
+			__b44_cam_read(bp, bp->dev->dev_addr, 0);
+			spin_unlock_irqrestore(&bp->lock, flags);
+		}
 
-	bp->dev->dev_addr[0] = eeprom[79];
-	bp->dev->dev_addr[1] = eeprom[78];
-	bp->dev->dev_addr[2] = eeprom[81];
-	bp->dev->dev_addr[3] = eeprom[80];
-	bp->dev->dev_addr[4] = eeprom[83];
-	bp->dev->dev_addr[5] = eeprom[82];
 
-	bp->phy_addr = eeprom[90] & 0x1f;
-	bp->mdc_port = (eeprom[90] >> 14) & 0x1;
+		/*
+		 * BCM47xx boards don't have a PHY. Usually there is a switch
+		 * chip with multiple PHYs connected to the PHY port.
+		 */
+		bp->phy_addr = B44_PHY_ADDR_NO_PHY;
+		bp->dma_offset = 0;
+	} else {
+		err = b44_read_eeprom(bp, &eeprom[0]);
+		if (err)
+			return err;
+
+		bp->dev->dev_addr[0] = eeprom[79];
+		bp->dev->dev_addr[1] = eeprom[78];
+		bp->dev->dev_addr[2] = eeprom[81];
+		bp->dev->dev_addr[3] = eeprom[80];
+		bp->dev->dev_addr[4] = eeprom[83];
+		bp->dev->dev_addr[5] = eeprom[82];
+
+		bp->phy_addr = eeprom[90] & 0x1f;
+		bp->dma_offset = SB_PCI_DMA;
+		bp->mdc_port = (eeprom[90] >> 14) & 0x1;
+	}
 
 	/* With this, plus the rx_header prepended to the data by the
 	 * hardware, we'll land the ethernet header on a 2-byte boundary.
@@ -1692,13 +1847,12 @@
 	bp->imask = IMASK_DEF;
 
 	bp->core_unit = ssb_core_unit(bp);
-	bp->dma_offset = ssb_get_addr(bp, SBID_PCI_DMA, 0);
 
 	/* XXX - really required? 
 	   bp->flags |= B44_FLAG_BUGGY_TXPTR;
          */
-out:
-	return err;
+
+	return 0;
 }
 
 static int __devinit b44_init_one(struct pci_dev *pdev,
@@ -1710,6 +1864,10 @@
 	struct b44 *bp;
 	int err, i;
 
+#ifdef CONFIG_BCM947XX
+	instance++;
+#endif
+
 	if (b44_version_printed++ == 0)
 		printk(KERN_INFO "%s", version);
 
@@ -1819,11 +1977,17 @@
 
 	pci_save_state(bp->pdev, bp->pci_cfg_state);
 
-	printk(KERN_INFO "%s: Broadcom 4400 10/100BaseT Ethernet ", dev->name);
+	printk(KERN_INFO "%s: Broadcom %s 10/100BaseT Ethernet ", dev->name,
+		(pdev->device == PCI_DEVICE_ID_BCM4713) ? "47xx" : "4400");
 	for (i = 0; i < 6; i++)
 		printk("%2.2x%c", dev->dev_addr[i],
 		       i == 5 ? '\n' : ':');
 
+	/* Initialize phy */
+	spin_lock_irq(&bp->lock);
+	b44_chip_reset(bp);
+	spin_unlock_irq(&bp->lock);
+	
 	return 0;
 
 err_out_iounmap:
diff -urN linux.old/drivers/net/b44.h linux.dev/drivers/net/b44.h
--- linux.old/drivers/net/b44.h	2006-01-16 21:10:55.881912250 +0100
+++ linux.dev/drivers/net/b44.h	2006-01-16 21:02:38.018249750 +0100
@@ -229,8 +229,6 @@
 #define  SBIPSFLAG_IMASK4	0x3f000000 /* Which sbflags --> mips interrupt 4 */
 #define  SBIPSFLAG_ISHIFT4	24
 #define B44_SBTPSFLAG	0x0F18UL /* SB Target Port OCP Slave Flag */
-#define  SBTPS_NUM0_MASK	0x0000003f
-#define  SBTPS_F0EN0		0x00000040
 #define B44_SBADMATCH3	0x0F60UL /* SB Address Match 3 */
 #define B44_SBADMATCH2	0x0F68UL /* SB Address Match 2 */
 #define B44_SBADMATCH1	0x0F70UL /* SB Address Match 1 */
@@ -461,6 +459,8 @@
 };
 
 #define B44_MCAST_TABLE_SIZE	32
+#define B44_PHY_ADDR_NO_PHY	30
+#define B44_MDC_RATIO		5000000
 
 /* SW copy of device statistics, kept up to date by periodic timer
  * which probes HW values.  Must have same relative layout as HW
diff -urN linux.old/include/linux/pci_ids.h linux.dev/include/linux/pci_ids.h
--- linux.old/include/linux/pci_ids.h	2006-01-16 21:10:55.901913500 +0100
+++ linux.dev/include/linux/pci_ids.h	2006-01-16 21:02:38.034250750 +0100
@@ -1741,6 +1741,7 @@
 #define PCI_DEVICE_ID_TIGON3_5901_2	0x170e
 #define PCI_DEVICE_ID_BCM4401		0x4401
 #define PCI_DEVICE_ID_BCM4401B0		0x4402
+#define PCI_DEVICE_ID_BCM4713		0x4713
 
 #define PCI_VENDOR_ID_ENE		0x1524
 #define PCI_DEVICE_ID_ENE_1211		0x1211